summaryrefslogtreecommitdiffstats
path: root/Doc
diff options
context:
space:
mode:
authorGeorg Brandl <georg@python.org>2009-12-19 17:57:51 (GMT)
committerGeorg Brandl <georg@python.org>2009-12-19 17:57:51 (GMT)
commit9e4ff75325cb5c4df61dad3bb64e5b5551bf7d3d (patch)
tree00209aabe09e1b32f0bfae2d2e716c76586b2b44 /Doc
parent62eaaf62ff525478de28f4c56b3f38183f9cb587 (diff)
downloadcpython-9e4ff75325cb5c4df61dad3bb64e5b5551bf7d3d.zip
cpython-9e4ff75325cb5c4df61dad3bb64e5b5551bf7d3d.tar.gz
cpython-9e4ff75325cb5c4df61dad3bb64e5b5551bf7d3d.tar.bz2
#7499: Review of Library FAQ by Florent Xicluna.
Diffstat (limited to 'Doc')
-rw-r--r--Doc/faq/library.rst301
-rw-r--r--Doc/howto/urllib2.rst2
2 files changed, 150 insertions, 153 deletions
diff --git a/Doc/faq/library.rst b/Doc/faq/library.rst
index 88fcf0e..b5c469e 100644
--- a/Doc/faq/library.rst
+++ b/Doc/faq/library.rst
@@ -38,7 +38,7 @@ There are (at least) three kinds of modules in Python:
type::
import sys
- print sys.builtin_module_names
+ print(sys.builtin_module_names)
How do I make a Python script executable on Unix?
@@ -187,8 +187,11 @@ How do I get a single keypress at a time?
-----------------------------------------
For Unix variants: There are several solutions. It's straightforward to do this
-using curses, but curses is a fairly large module to learn. Here's a solution
-without curses::
+using curses, but curses is a fairly large module to learn.
+
+.. XXX this doesn't work out of the box, some IO expert needs to check why
+
+ Here's a solution without curses::
import termios, fcntl, sys, os
fd = sys.stdin.fileno()
@@ -202,23 +205,24 @@ without curses::
fcntl.fcntl(fd, fcntl.F_SETFL, oldflags | os.O_NONBLOCK)
try:
- while 1:
+ while True:
try:
c = sys.stdin.read(1)
- print "Got character", `c`
- except IOError: pass
+ print("Got character", repr(c))
+ except IOError:
+ pass
finally:
termios.tcsetattr(fd, termios.TCSAFLUSH, oldterm)
fcntl.fcntl(fd, fcntl.F_SETFL, oldflags)
-You need the :mod:`termios` and the :mod:`fcntl` module for any of this to work,
-and I've only tried it on Linux, though it should work elsewhere. In this code,
-characters are read and printed one at a time.
+ You need the :mod:`termios` and the :mod:`fcntl` module for any of this to
+ work, and I've only tried it on Linux, though it should work elsewhere. In
+ this code, characters are read and printed one at a time.
-:func:`termios.tcsetattr` turns off stdin's echoing and disables canonical mode.
-:func:`fcntl.fnctl` is used to obtain stdin's file descriptor flags and modify
-them for non-blocking mode. Since reading stdin when it is empty results in an
-:exc:`IOError`, this error is caught and ignored.
+ :func:`termios.tcsetattr` turns off stdin's echoing and disables canonical
+ mode. :func:`fcntl.fnctl` is used to obtain stdin's file descriptor flags
+ and modify them for non-blocking mode. Since reading stdin when it is empty
+ results in an :exc:`IOError`, this error is caught and ignored.
Threads
@@ -247,13 +251,13 @@ all the threads to finish::
import threading, time
def thread_task(name, n):
- for i in range(n): print name, i
+ for i in range(n): print(name, i)
for i in range(10):
T = threading.Thread(target=thread_task, args=(str(i), i))
T.start()
- time.sleep(10) # <----------------------------!
+ time.sleep(10) # <---------------------------!
But now (on many platforms) the threads don't run in parallel, but appear to run
sequentially, one at a time! The reason is that the OS thread scheduler doesn't
@@ -262,8 +266,8 @@ start a new thread until the previous thread is blocked.
A simple fix is to add a tiny sleep to the start of the run function::
def thread_task(name, n):
- time.sleep(0.001) # <---------------------!
- for i in range(n): print name, i
+ time.sleep(0.001) # <--------------------!
+ for i in range(n): print(name, i)
for i in range(10):
T = threading.Thread(target=thread_task, args=(str(i), i))
@@ -289,28 +293,28 @@ once.
Here's a trivial example::
- import threading, Queue, time
+ import threading, queue, time
# The worker thread gets jobs off the queue. When the queue is empty, it
# assumes there will be no more work and exits.
# (Realistically workers will run until terminated.)
def worker ():
- print 'Running worker'
+ print('Running worker')
time.sleep(0.1)
while True:
try:
arg = q.get(block=False)
- except Queue.Empty:
- print 'Worker', threading.currentThread(),
- print 'queue empty'
+ except queue.Empty:
+ print('Worker', threading.currentThread(), end=' ')
+ print('queue empty')
break
else:
- print 'Worker', threading.currentThread(),
- print 'running with argument', arg
+ print('Worker', threading.currentThread(), end=' ')
+ print('running with argument', arg)
time.sleep(0.5)
# Create queue
- q = Queue.Queue()
+ q = queue.Queue()
# Start a pool of 5 workers
for i in range(5):
@@ -322,10 +326,10 @@ Here's a trivial example::
q.put(i)
# Give threads time to run
- print 'Main thread sleeping'
+ print('Main thread sleeping')
time.sleep(5)
-When run, this will produce the following output:
+When run, this will produce the following output::
Running worker
Running worker
@@ -333,12 +337,12 @@ When run, this will produce the following output:
Running worker
Running worker
Main thread sleeping
- Worker <Thread(worker 1, started)> running with argument 0
- Worker <Thread(worker 2, started)> running with argument 1
- Worker <Thread(worker 3, started)> running with argument 2
- Worker <Thread(worker 4, started)> running with argument 3
- Worker <Thread(worker 5, started)> running with argument 4
- Worker <Thread(worker 1, started)> running with argument 5
+ Worker <Thread(worker 1, started 130283832797456)> running with argument 0
+ Worker <Thread(worker 2, started 130283824404752)> running with argument 1
+ Worker <Thread(worker 3, started 130283816012048)> running with argument 2
+ Worker <Thread(worker 4, started 130283807619344)> running with argument 3
+ Worker <Thread(worker 5, started 130283799226640)> running with argument 4
+ Worker <Thread(worker 1, started 130283832797456)> running with argument 5
...
Consult the module's documentation for more details; the ``Queue`` class
@@ -351,7 +355,7 @@ What kinds of global value mutation are thread-safe?
A global interpreter lock (GIL) is used internally to ensure that only one
thread runs in the Python VM at a time. In general, Python offers to switch
among threads only between bytecode instructions; how frequently it switches can
-be set via :func:`sys.setcheckinterval`. Each bytecode instruction and
+be set via :func:`sys.setswitchinterval`. Each bytecode instruction and
therefore all the C implementation code reached from each instruction is
therefore atomic from the point of view of a Python program.
@@ -443,7 +447,7 @@ How do I delete a file? (And other file questions...)
-----------------------------------------------------
Use ``os.remove(filename)`` or ``os.unlink(filename)``; for documentation, see
-the :mod:`os` module. The two functions are identical; :func:`unlink` is simply
+the :mod:`os` module. The two functions are identical; :func:`~os.unlink` is simply
the name of the Unix system call for this function.
To remove a directory, use :func:`os.rmdir`; use :func:`os.mkdir` to create one.
@@ -505,81 +509,83 @@ to read n bytes from a pipe p created with :func:`os.popen`, you need to use
``p.read(n)``.
-How do I run a subprocess with pipes connected to both input and output?
-------------------------------------------------------------------------
-
-.. XXX update to use subprocess
-
-Use the :mod:`popen2` module. For example::
-
- import popen2
- fromchild, tochild = popen2.popen2("command")
- tochild.write("input\n")
- tochild.flush()
- output = fromchild.readline()
-
-Warning: in general it is unwise to do this because you can easily cause a
-deadlock where your process is blocked waiting for output from the child while
-the child is blocked waiting for input from you. This can be caused because the
-parent expects the child to output more text than it does, or it can be caused
-by data being stuck in stdio buffers due to lack of flushing. The Python parent
-can of course explicitly flush the data it sends to the child before it reads
-any output, but if the child is a naive C program it may have been written to
-never explicitly flush its output, even if it is interactive, since flushing is
-normally automatic.
-
-Note that a deadlock is also possible if you use :func:`popen3` to read stdout
-and stderr. If one of the two is too large for the internal buffer (increasing
-the buffer size does not help) and you ``read()`` the other one first, there is
-a deadlock, too.
-
-Note on a bug in popen2: unless your program calls ``wait()`` or ``waitpid()``,
-finished child processes are never removed, and eventually calls to popen2 will
-fail because of a limit on the number of child processes. Calling
-:func:`os.waitpid` with the :data:`os.WNOHANG` option can prevent this; a good
-place to insert such a call would be before calling ``popen2`` again.
-
-In many cases, all you really need is to run some data through a command and get
-the result back. Unless the amount of data is very large, the easiest way to do
-this is to write it to a temporary file and run the command with that temporary
-file as input. The standard module :mod:`tempfile` exports a ``mktemp()``
-function to generate unique temporary file names. ::
-
- import tempfile
- import os
-
- class Popen3:
- """
- This is a deadlock-safe version of popen that returns
- an object with errorlevel, out (a string) and err (a string).
- (capturestderr may not work under windows.)
- Example: print Popen3('grep spam','\n\nhere spam\n\n').out
- """
- def __init__(self,command,input=None,capturestderr=None):
- outfile=tempfile.mktemp()
- command="( %s ) > %s" % (command,outfile)
- if input:
- infile=tempfile.mktemp()
- open(infile,"w").write(input)
- command=command+" <"+infile
- if capturestderr:
- errfile=tempfile.mktemp()
- command=command+" 2>"+errfile
- self.errorlevel=os.system(command) >> 8
- self.out=open(outfile,"r").read()
- os.remove(outfile)
- if input:
- os.remove(infile)
- if capturestderr:
- self.err=open(errfile,"r").read()
- os.remove(errfile)
-
-Note that many interactive programs (e.g. vi) don't work well with pipes
-substituted for standard input and output. You will have to use pseudo ttys
-("ptys") instead of pipes. Or you can use a Python interface to Don Libes'
-"expect" library. A Python extension that interfaces to expect is called "expy"
-and available from http://expectpy.sourceforge.net. A pure Python solution that
-works like expect is `pexpect <http://pypi.python.org/pypi/pexpect/>`_.
+.. XXX update to use subprocess. See the :ref:`subprocess-replacements` section.
+
+ How do I run a subprocess with pipes connected to both input and output?
+ ------------------------------------------------------------------------
+
+ Use the :mod:`popen2` module. For example::
+
+ import popen2
+ fromchild, tochild = popen2.popen2("command")
+ tochild.write("input\n")
+ tochild.flush()
+ output = fromchild.readline()
+
+ Warning: in general it is unwise to do this because you can easily cause a
+ deadlock where your process is blocked waiting for output from the child
+ while the child is blocked waiting for input from you. This can be caused
+ because the parent expects the child to output more text than it does, or it
+ can be caused by data being stuck in stdio buffers due to lack of flushing.
+ The Python parent can of course explicitly flush the data it sends to the
+ child before it reads any output, but if the child is a naive C program it
+ may have been written to never explicitly flush its output, even if it is
+ interactive, since flushing is normally automatic.
+
+ Note that a deadlock is also possible if you use :func:`popen3` to read
+ stdout and stderr. If one of the two is too large for the internal buffer
+ (increasing the buffer size does not help) and you ``read()`` the other one
+ first, there is a deadlock, too.
+
+ Note on a bug in popen2: unless your program calls ``wait()`` or
+ ``waitpid()``, finished child processes are never removed, and eventually
+ calls to popen2 will fail because of a limit on the number of child
+ processes. Calling :func:`os.waitpid` with the :data:`os.WNOHANG` option can
+ prevent this; a good place to insert such a call would be before calling
+ ``popen2`` again.
+
+ In many cases, all you really need is to run some data through a command and
+ get the result back. Unless the amount of data is very large, the easiest
+ way to do this is to write it to a temporary file and run the command with
+ that temporary file as input. The standard module :mod:`tempfile` exports a
+ ``mktemp()`` function to generate unique temporary file names. ::
+
+ import tempfile
+ import os
+
+ class Popen3:
+ """
+ This is a deadlock-safe version of popen that returns
+ an object with errorlevel, out (a string) and err (a string).
+ (capturestderr may not work under windows.)
+ Example: print(Popen3('grep spam','\n\nhere spam\n\n').out)
+ """
+ def __init__(self,command,input=None,capturestderr=None):
+ outfile=tempfile.mktemp()
+ command="( %s ) > %s" % (command,outfile)
+ if input:
+ infile=tempfile.mktemp()
+ open(infile,"w").write(input)
+ command=command+" <"+infile
+ if capturestderr:
+ errfile=tempfile.mktemp()
+ command=command+" 2>"+errfile
+ self.errorlevel=os.system(command) >> 8
+ self.out=open(outfile,"r").read()
+ os.remove(outfile)
+ if input:
+ os.remove(infile)
+ if capturestderr:
+ self.err=open(errfile,"r").read()
+ os.remove(errfile)
+
+ Note that many interactive programs (e.g. vi) don't work well with pipes
+ substituted for standard input and output. You will have to use pseudo ttys
+ ("ptys") instead of pipes. Or you can use a Python interface to Don Libes'
+ "expect" library. A Python extension that interfaces to expect is called
+ "expy" and available from http://expectpy.sourceforge.net. A pure Python
+ solution that works like expect is `pexpect
+ <http://pypi.python.org/pypi/pexpect/>`_.
How do I access the serial (RS232) port?
@@ -601,7 +607,7 @@ Python file objects are a high-level layer of abstraction on top of C streams,
which in turn are a medium-level layer of abstraction on top of (among other
things) low-level C file descriptors.
-For most file objects you create in Python via the builtin ``file`` constructor,
+For most file objects you create in Python via the builtin ``open`` constructor,
``f.close()`` marks the Python file object as being closed from Python's point
of view, and also arranges to close the underlying C stream. This also happens
automatically in f's destructor, when f becomes garbage.
@@ -645,41 +651,29 @@ How can I mimic CGI form submission (METHOD=POST)?
I would like to retrieve web pages that are the result of POSTing a form. Is
there existing code that would let me do this easily?
-Yes. Here's a simple example that uses httplib::
+Yes. Here's a simple example that uses urllib.request::
#!/usr/local/bin/python
- import httplib, sys, time
+ import urllib.request
### build the query string
qs = "First=Josephine&MI=Q&Last=Public"
### connect and send the server a path
- httpobj = httplib.HTTP('www.some-server.out-there', 80)
- httpobj.putrequest('POST', '/cgi-bin/some-cgi-script')
- ### now generate the rest of the HTTP headers...
- httpobj.putheader('Accept', '*/*')
- httpobj.putheader('Connection', 'Keep-Alive')
- httpobj.putheader('Content-type', 'application/x-www-form-urlencoded')
- httpobj.putheader('Content-length', '%d' % len(qs))
- httpobj.endheaders()
- httpobj.send(qs)
- ### find out what the server said in response...
- reply, msg, hdrs = httpobj.getreply()
- if reply != 200:
- sys.stdout.write(httpobj.getfile().read())
+ req = urllib.request.urlopen('http://www.some-server.out-there'
+ '/cgi-bin/some-cgi-script', data=qs)
+ msg, hdrs = req.read(), req.info()
Note that in general for URL-encoded POST operations, query strings must be
-quoted by using :func:`urllib.quote`. For example to send name="Guy Steele,
+quoted by using :func:`urllib.parse.urlencode`. For example to send name="Guy Steele,
Jr."::
- >>> from urllib import quote
- >>> x = quote("Guy Steele, Jr.")
- >>> x
- 'Guy%20Steele,%20Jr.'
- >>> query_string = "name="+x
- >>> query_string
- 'name=Guy%20Steele,%20Jr.'
+ >>> import urllib.parse
+ >>> urllib.parse.urlencode({'name': 'Guy Steele, Jr.'})
+ 'name=Guy+Steele%2C+Jr.'
+
+.. seealso:: :ref:`urllib-howto` for extensive examples.
What module should I use to help with generating HTML?
@@ -712,9 +706,9 @@ work on any host that supports an SMTP listener. ::
import sys, smtplib
- fromaddr = raw_input("From: ")
- toaddrs = raw_input("To: ").split(',')
- print "Enter message, end with ^D:"
+ fromaddr = input("From: ")
+ toaddrs = input("To: ").split(',')
+ print("Enter message, end with ^D:")
msg = ''
while True:
line = sys.stdin.readline()
@@ -732,17 +726,17 @@ varies between systems; sometimes it is ``/usr/lib/sendmail``, sometime
``/usr/sbin/sendmail``. The sendmail manual page will help you out. Here's
some sample code::
- SENDMAIL = "/usr/sbin/sendmail" # sendmail location
+ SENDMAIL = "/usr/sbin/sendmail" # sendmail location
import os
p = os.popen("%s -t -i" % SENDMAIL, "w")
p.write("To: receiver@example.com\n")
p.write("Subject: test\n")
- p.write("\n") # blank line separating headers from body
+ p.write("\n") # blank line separating headers from body
p.write("Some text\n")
p.write("some more text\n")
sts = p.close()
if sts != 0:
- print "Sendmail exit status", sts
+ print("Sendmail exit status", sts)
How do I avoid blocking in the connect() method of a socket?
@@ -759,7 +753,7 @@ have to check what's returned on your system.
You can use the ``connect_ex()`` method to avoid creating an exception. It will
just return the errno value. To poll, you can call ``connect_ex()`` again later
--- 0 or ``errno.EISCONN`` indicate that you're connected -- or you can pass this
+-- ``0`` or ``errno.EISCONN`` indicate that you're connected -- or you can pass this
socket to select to check if it's writable.
@@ -798,21 +792,15 @@ than a third of a second. This often beats doing something more complex and
general such as using gdbm with pickle/shelve.
-Why is cPickle so slow?
------------------------
-
-.. XXX update this, default protocol is 2/3
+If my program crashes with a bsddb (or anydbm) database open, it gets corrupted. How come?
+------------------------------------------------------------------------------------------
-The default format used by the pickle module is a slow one that results in
-readable pickles. Making it the default, but it would break backward
-compatibility::
+.. XXX move this FAQ entry elsewhere?
- largeString = 'z' * (100 * 1024)
- myPickle = cPickle.dumps(largeString, protocol=1)
+.. note::
-
-If my program crashes with a bsddb (or anydbm) database open, it gets corrupted. How come?
-------------------------------------------------------------------------------------------
+ The bsddb module is now available as a standalone package `pybsddb
+ <http://www.jcea.es/programacion/pybsddb.htm>`_.
Databases opened for write access with the bsddb module (and often by the anydbm
module, since it will preferentially use bsddb) must explicitly be closed using
@@ -827,6 +815,13 @@ encounter an exception the next time the file is opened.
I tried to open Berkeley DB file, but bsddb produces bsddb.error: (22, 'Invalid argument'). Help! How can I restore my data?
----------------------------------------------------------------------------------------------------------------------------
+.. XXX move this FAQ entry elsewhere?
+
+.. note::
+
+ The bsddb module is now available as a standalone package `pybsddb
+ <http://www.jcea.es/programacion/pybsddb.htm>`_.
+
Don't panic! Your data is probably intact. The most frequent cause for the error
is that you tried to open an earlier Berkeley DB file with a later version of
the Berkeley DB library.
diff --git a/Doc/howto/urllib2.rst b/Doc/howto/urllib2.rst
index fb5b1c3..110b6de 100644
--- a/Doc/howto/urllib2.rst
+++ b/Doc/howto/urllib2.rst
@@ -1,3 +1,5 @@
+.. _urllib-howto:
+
***********************************************************
HOWTO Fetch Internet Resources Using The urllib Package
***********************************************************