Changes for Lee Busby's SIGFPE patch set.

New file pyfpe.h, new exception FloatingPointError.

4 files changed, 168 insertions, 0 deletions

diff --git a/Include/allobjects.h b/Include/allobjects.h
index 8c7f6c3..f2961c0 100644
--- a/Include/allobjects.h
+++ b/Include/allobjects.h
@@ -113,4 +113,6 @@ PERFORMANCE OF THIS SOFTWARE.
 #include "rename2.h"
 #endif
 
+#include "pyfpe.h"
+
 #endif /* !Py_ALLOBJECTS_H */
diff --git a/Include/pyerrors.h b/Include/pyerrors.h
index b29ec03..61751e6 100644
--- a/Include/pyerrors.h
+++ b/Include/pyerrors.h
@@ -51,6 +51,7 @@ extern DL_IMPORT(PyObject *) PyExc_AccessError;
 extern DL_IMPORT(PyObject *) PyExc_AttributeError;
 extern DL_IMPORT(PyObject *) PyExc_ConflictError;
 extern DL_IMPORT(PyObject *) PyExc_EOFError;
+extern DL_IMPORT(PyObject *) PyExc_FloatingPointError;
 extern DL_IMPORT(PyObject *) PyExc_IOError;
 extern DL_IMPORT(PyObject *) PyExc_ImportError;
 extern DL_IMPORT(PyObject *) PyExc_IndexError;
diff --git a/Include/pyfpe.h b/Include/pyfpe.h
new file mode 100644
index 0000000..ef44e66
--- /dev/null
+++ b/Include/pyfpe.h
@@ -0,0 +1,164 @@
+#ifndef Py_PYFPE_H
+#define Py_PYFPE_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+/*
+     ---------------------------------------------------------------------  
+    /                       Copyright (c) 1996.                           \ 
+   |          The Regents of the University of California.                 |
+   |                        All rights reserved.                           |
+   |                                                                       |
+   |   Permission to use, copy, modify, and distribute this software for   |
+   |   any purpose without fee is hereby granted, provided that this en-   |
+   |   tire notice is included in all copies of any software which is or   |
+   |   includes  a  copy  or  modification  of  this software and in all   |
+   |   copies of the supporting documentation for such software.           |
+   |                                                                       |
+   |   This  work was produced at the University of California, Lawrence   |
+   |   Livermore National Laboratory under  contract  no.  W-7405-ENG-48   |
+   |   between  the  U.S.  Department  of  Energy and The Regents of the   |
+   |   University of California for the operation of UC LLNL.              |
+   |                                                                       |
+   |                              DISCLAIMER                               |
+   |                                                                       |
+   |   This  software was prepared as an account of work sponsored by an   |
+   |   agency of the United States Government. Neither the United States   |
+   |   Government  nor the University of California nor any of their em-   |
+   |   ployees, makes any warranty, express or implied, or  assumes  any   |
+   |   liability  or  responsibility  for the accuracy, completeness, or   |
+   |   usefulness of any information,  apparatus,  product,  or  process   |
+   |   disclosed,   or  represents  that  its  use  would  not  infringe   |
+   |   privately-owned rights. Reference herein to any specific  commer-   |
+   |   cial  products,  process,  or  service  by trade name, trademark,   |
+   |   manufacturer, or otherwise, does not  necessarily  constitute  or   |
+   |   imply  its endorsement, recommendation, or favoring by the United   |
+   |   States Government or the University of California. The views  and   |
+   |   opinions  of authors expressed herein do not necessarily state or   |
+   |   reflect those of the United States Government or  the  University   |
+   |   of  California,  and shall not be used for advertising or product   |
+    \  endorsement purposes.                                              / 
+     ---------------------------------------------------------------------  
+*/
+
+/*
+ *       Define macros for handling SIGFPE.
+ *       Lee Busby, LLNL, November, 1996
+ *       busby1@llnl.gov
+ * 
+ *********************************************
+ * Overview of the system for handling SIGFPE:
+ * 
+ * This file (Include/pyfpe.h) defines a couple of "wrapper" macros for
+ * insertion into your Python C code of choice. Their proper use is
+ * discussed below. The file Python/pyfpe.c defines a pair of global
+ * variables PyFPE_jbuf and PyFPE_counter which are used by the signal
+ * handler for SIGFPE to decide if a particular exception was protected
+ * by the macros. The signal handler itself, and code for enabling the
+ * generation of SIGFPE in the first place, is in a (new) Python module
+ * named fpectl. This module is standard in every respect. It can be loaded
+ * either statically or dynamically as you choose, and like any other
+ * Python module, has no effect until you import it.
+ * 
+ * In the general case, there are three steps toward handling SIGFPE in any
+ * Python code:
+ * 
+ * 1) Add the *_PROTECT macros to your C code as required to protect
+ *    dangerous floating point sections.
+ * 
+ * 2) Turn on the inclusion of the code by #defining WANT_SIGFPE_HANDLER in
+ *    config.h.in before you configure, compile, and install Python, and the
+ *    fpectl module, and any other modules which may have conditional code.
+ * 
+ * 3) When python is built and running, import fpectl, and execute
+ *    fpectl.turnon_sigfpe(). This sets up the signal handler and enables
+ *    generation of SIGFPE whenever an exception occurs. From this point
+ *    on, any properly trapped SIGFPE should result in the Python
+ *    FloatingPointError exception.
+ * 
+ * Step 1 has been done already for the Python kernel code, and will be
+ * done soon for Hugunin's NumPy array package and my Gist graphics module.
+ * Step 2 is usually done once at python install time. Python's behavior
+ * with respect to SIGFPE is not changed unless you also do step 3. Thus
+ * you can control this new facility at compile time, or run time, or both.
+ * 
+ ******************************** 
+ * Using the macros in your code:
+ * 
+ * static PyObject *foobar(PyObject *self,PyObject *args)
+ * {
+ *     ....
+ *     PyFPE_START_PROTECT("Error in foobar", return 0)
+ *     dangerous_op(somearg1, somearg2, ...);
+ *     PyFPE_END_PROTECT
+ *     ....
+ * }
+ * 
+ * If a floating point error occurs in dangerous_op, foobar returns 0
+ * (NULL), after setting the associated value of the FloatingPointError
+ * exception to "Error in foobar". ``Dangerous_op'' can be a single
+ * operation, or a block, or function calls, or any combination, so long as
+ * no alternate return is possible before the PyFPE_END_PROTECT macro is
+ * reached.
+ * 
+ * The macros can only be used in a function context where an error return
+ * can be recognized as signaling a Python exception. (Generally, most
+ * functions that return a PyObject * will qualify.)
+ * 
+ * Guido's original design suggestion for PyFPE_START_PROTECT and
+ * PyFPE_END_PROTECT had them open and close a local block, with a locally
+ * defined jmp_buf and jmp_buf pointer. This would allow recursive nesting
+ * of the macros. The Ansi C standard makes it clear that such local
+ * variables need to be declared with the "volatile" type qualifier to keep
+ * setjmp from corrupting their values. Some current implementations seem
+ * to be more restrictive. For example, the HPUX man page for setjmp says
+ * 
+ *   Upon the return from a setjmp() call caused by a longjmp(), the
+ *   values of any non-static local variables belonging to the routine
+ *   from which setjmp() was called are undefined. Code which depends on
+ *   such values is not guaranteed to be portable.
+ * 
+ * I therefore decided on a more limited form of nesting, using a counter
+ * variable (PyFPE_counter) to keep track of any recursion.  If an exception
+ * occurs in an ``inner'' pair of macros, the return will apparently
+ * come from the top level.
+ * 
+ */
+
+#ifdef WANT_SIGFPE_HANDLER
+#include <signal.h>
+#include <setjmp.h>
+#include <math.h>
+extern jmp_buf PyFPE_jbuf;
+extern int PyFPE_counter;
+extern double PyFPE_dummy(void);
+
+#define PyFPE_START_PROTECT(err_string, leave_stmt) \
+if (!PyFPE_counter++ && setjmp(PyFPE_jbuf)) { \
+	PyFPE_counter = 0; \
+	PyErr_SetString(PyExc_FloatingPointError, err_string); \
+	leave_stmt; \
+}
+
+/*
+ * This (following) is a heck of a way to decrement a counter. However,
+ * code optimizers will sometimes move this statement so that it gets
+ * executed *before* the unsafe expression which we're trying to protect.
+ * This pretty well messes things up, of course. So the best I've been able
+ * to do is to put a (hopefully fast) function call into the expression
+ * which counts down PyFPE_counter, and thereby monkey wrench the overeager
+ * optimizer. Better solutions are welcomed....
+ */
+#define PyFPE_END_PROTECT PyFPE_counter -= (int)PyFPE_dummy();
+
+#else
+
+#define PyFPE_START_PROTECT(err_string, leave_stmt)
+#define PyFPE_END_PROTECT
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* !Py_PYFPE_H */
diff --git a/Include/rename2.h b/Include/rename2.h
index 47c90cb..895a83d 100644
--- a/Include/rename2.h
+++ b/Include/rename2.h
@@ -75,6 +75,7 @@ PERFORMANCE OF THIS SOFTWARE.
 #define AttributeError PyExc_AttributeError
 #define ConflictError PyExc_ConflictError
 #define EOFError PyExc_EOFError
+#define FloatingPointError PyExc_FloatingPointError
 #define IOError PyExc_IOError
 #define ImportError PyExc_ImportError
 #define IndexError PyExc_IndexError