Whitespace normalization, via reindent.py.

14 files changed, 995 insertions, 995 deletions

diff --git a/Lib/plat-irix6/AL.py b/Lib/plat-irix6/AL.py
index ed17cde..ec941a2 100644
--- a/Lib/plat-irix6/AL.py
+++ b/Lib/plat-irix6/AL.py
@@ -1,61 +1,61 @@
-RATE_48000 	= 48000
-RATE_44100	= 44100
-RATE_32000	= 32000
-RATE_22050	= 22050
-RATE_16000	= 16000
-RATE_11025	= 11025
-RATE_8000	= 8000
+RATE_48000      = 48000
+RATE_44100      = 44100
+RATE_32000      = 32000
+RATE_22050      = 22050
+RATE_16000      = 16000
+RATE_11025      = 11025
+RATE_8000       = 8000
 
 SAMPFMT_TWOSCOMP= 1
-SAMPFMT_FLOAT	= 32
-SAMPFMT_DOUBLE	= 64
+SAMPFMT_FLOAT   = 32
+SAMPFMT_DOUBLE  = 64
 
-SAMPLE_8	= 1
-SAMPLE_16	= 2
-	# SAMPLE_24 is the low 24 bits of a long, sign extended to 32 bits
-SAMPLE_24	= 4
+SAMPLE_8        = 1
+SAMPLE_16       = 2
+        # SAMPLE_24 is the low 24 bits of a long, sign extended to 32 bits
+SAMPLE_24       = 4
 
-MONO		= 1
-STEREO		= 2
-QUADRO		= 4			# 4CHANNEL is not a legal Python name
+MONO            = 1
+STEREO          = 2
+QUADRO          = 4                     # 4CHANNEL is not a legal Python name
 
-INPUT_LINE	= 0
-INPUT_MIC	= 1
-INPUT_DIGITAL	= 2
+INPUT_LINE      = 0
+INPUT_MIC       = 1
+INPUT_DIGITAL   = 2
 
-MONITOR_OFF	= 0
-MONITOR_ON	= 1
+MONITOR_OFF     = 0
+MONITOR_ON      = 1
 
-ERROR_NUMBER		= 0
-ERROR_TYPE		= 1
-ERROR_LOCATION_LSP 	= 2
-ERROR_LOCATION_MSP	= 3
-ERROR_LENGTH		= 4
+ERROR_NUMBER            = 0
+ERROR_TYPE              = 1
+ERROR_LOCATION_LSP      = 2
+ERROR_LOCATION_MSP      = 3
+ERROR_LENGTH            = 4
 
-ERROR_INPUT_UNDERFLOW	= 0
-ERROR_OUTPUT_OVERFLOW	= 1
+ERROR_INPUT_UNDERFLOW   = 0
+ERROR_OUTPUT_OVERFLOW   = 1
 
 # These seem to be not supported anymore:
-##HOLD, RELEASE			= 0, 1
-##ATTAIL, ATHEAD, ATMARK, ATTIME	= 0, 1, 2, 3
-
-DEFAULT_DEVICE	= 1
-
-INPUT_SOURCE		= 0
-LEFT_INPUT_ATTEN	= 1
-RIGHT_INPUT_ATTEN	= 2
-INPUT_RATE		= 3
-OUTPUT_RATE		= 4
-LEFT_SPEAKER_GAIN	= 5
-RIGHT_SPEAKER_GAIN	= 6
-INPUT_COUNT		= 7
-OUTPUT_COUNT		= 8
-UNUSED_COUNT		= 9
-SYNC_INPUT_TO_AES	= 10
-SYNC_OUTPUT_TO_AES	= 11
-MONITOR_CTL		= 12
-LEFT_MONITOR_ATTEN	= 13
-RIGHT_MONITOR_ATTEN	= 14
-
-ENUM_VALUE	= 0	# only certain values are valid
-RANGE_VALUE	= 1	# any value in range is valid
+##HOLD, RELEASE                 = 0, 1
+##ATTAIL, ATHEAD, ATMARK, ATTIME        = 0, 1, 2, 3
+
+DEFAULT_DEVICE  = 1
+
+INPUT_SOURCE            = 0
+LEFT_INPUT_ATTEN        = 1
+RIGHT_INPUT_ATTEN       = 2
+INPUT_RATE              = 3
+OUTPUT_RATE             = 4
+LEFT_SPEAKER_GAIN       = 5
+RIGHT_SPEAKER_GAIN      = 6
+INPUT_COUNT             = 7
+OUTPUT_COUNT            = 8
+UNUSED_COUNT            = 9
+SYNC_INPUT_TO_AES       = 10
+SYNC_OUTPUT_TO_AES      = 11
+MONITOR_CTL             = 12
+LEFT_MONITOR_ATTEN      = 13
+RIGHT_MONITOR_ATTEN     = 14
+
+ENUM_VALUE      = 0     # only certain values are valid
+RANGE_VALUE     = 1     # any value in range is valid
diff --git a/Lib/plat-irix6/CD.py b/Lib/plat-irix6/CD.py
index ad56561..8c1e03b 100644
--- a/Lib/plat-irix6/CD.py
+++ b/Lib/plat-irix6/CD.py
@@ -1,34 +1,34 @@
-ERROR		= 0
-NODISC		= 1
-READY		= 2
-PLAYING		= 3
-PAUSED		= 4
-STILL		= 5
+ERROR           = 0
+NODISC          = 1
+READY           = 2
+PLAYING         = 3
+PAUSED          = 4
+STILL           = 5
 
-AUDIO		= 0
-PNUM		= 1
-INDEX		= 2
-PTIME		= 3
-ATIME		= 4
-CATALOG		= 5
-IDENT		= 6
-CONTROL		= 7
+AUDIO           = 0
+PNUM            = 1
+INDEX           = 2
+PTIME           = 3
+ATIME           = 4
+CATALOG         = 5
+IDENT           = 6
+CONTROL         = 7
 
-CDDA_DATASIZE	= 2352
+CDDA_DATASIZE   = 2352
 
-##CDDA_SUBCODESIZE	= (sizeof(struct subcodeQ))
-##CDDA_BLOCKSIZE	= (sizeof(struct cdframe))
-##CDDA_NUMSAMPLES	= (CDDA_DATASIZE/2)
+##CDDA_SUBCODESIZE      = (sizeof(struct subcodeQ))
+##CDDA_BLOCKSIZE        = (sizeof(struct cdframe))
+##CDDA_NUMSAMPLES       = (CDDA_DATASIZE/2)
 ##
-##CDQ_PREEMP_MASK	= 0xd
-##CDQ_COPY_MASK	= 0xb
-##CDQ_DDATA_MASK	= 0xd
-##CDQ_BROADCAST_MASK	= 0x8
-##CDQ_PREEMPHASIS	= 0x1
-##CDQ_COPY_PERMITTED	= 0x2		
-##CDQ_DIGITAL_DATA	= 0x4
-##CDQ_BROADCAST_USE	= 0x8
+##CDQ_PREEMP_MASK       = 0xd
+##CDQ_COPY_MASK = 0xb
+##CDQ_DDATA_MASK        = 0xd
+##CDQ_BROADCAST_MASK    = 0x8
+##CDQ_PREEMPHASIS       = 0x1
+##CDQ_COPY_PERMITTED    = 0x2
+##CDQ_DIGITAL_DATA      = 0x4
+##CDQ_BROADCAST_USE     = 0x8
 ##
-##CDQ_MODE1	= 0x1
-##CDQ_MODE2	= 0x2
-##CDQ_MODE3	= 0x3
+##CDQ_MODE1     = 0x1
+##CDQ_MODE2     = 0x2
+##CDQ_MODE3     = 0x3
diff --git a/Lib/plat-irix6/CL.py b/Lib/plat-irix6/CL.py
index 468ecaa..23259c5 100644
--- a/Lib/plat-irix6/CL.py
+++ b/Lib/plat-irix6/CL.py
@@ -1,24 +1,24 @@
 # Backward compatible module CL.
 # All relevant symbols are now defined in the module cl.
 try:
-	from cl import *
+    from cl import *
 except ImportError:
-	from CL_old import *
+    from CL_old import *
 else:
-	del CompressImage
-	del DecompressImage
-	del GetAlgorithmName
-	del OpenCompressor
-	del OpenDecompressor
-	del QueryAlgorithms
-	del QueryMaxHeaderSize
-	del QueryScheme
-	del QuerySchemeFromName
-	del SetDefault
-	del SetMax
-	del SetMin
-	try:
-		del cvt_type
-	except NameError:
-		pass
-	del error
+    del CompressImage
+    del DecompressImage
+    del GetAlgorithmName
+    del OpenCompressor
+    del OpenDecompressor
+    del QueryAlgorithms
+    del QueryMaxHeaderSize
+    del QueryScheme
+    del QuerySchemeFromName
+    del SetDefault
+    del SetMax
+    del SetMin
+    try:
+        del cvt_type
+    except NameError:
+        pass
+    del error
diff --git a/Lib/plat-irix6/FILE.py b/Lib/plat-irix6/FILE.py
index 087d2ec..ab74d7c 100644
--- a/Lib/plat-irix6/FILE.py
+++ b/Lib/plat-irix6/FILE.py
@@ -441,7 +441,7 @@ def OFFTOBB(bytes): return (((__uint64_t)(bytes) + BBSIZE - 1) >> BBSHIFT)
 
 def OFFTOBBT(bytes): return ((off_t)(bytes) >> BBSHIFT)
 
-def BBTOOFF(bbs): return ((off_t)(bbs) << BBSHIFT)     
+def BBTOOFF(bbs): return ((off_t)(bbs) << BBSHIFT)
 
 SEEKLIMIT32 = 0x7fffffff
 MAXBSIZE = 8192
@@ -489,9 +489,9 @@ MRLOCK_BEHAVIOR = 0x2
 MRLOCK_DBLTRIPPABLE = 0x4
 MRLOCK_ALLOW_EQUAL_PRI = 0x8
 MRLOCK_DEFAULT = MRLOCK_BARRIER
-def mraccess(mrp): return mraccessf(mrp, 0)	 
+def mraccess(mrp): return mraccessf(mrp, 0)
 
-def mrupdate(mrp): return mrupdatef(mrp, 0)	 
+def mrupdate(mrp): return mrupdatef(mrp, 0)
 
 def mp_mutex_unlock(m): return mutex_unlock(m)
 
diff --git a/Lib/plat-irix6/FL.py b/Lib/plat-irix6/FL.py
index ae665e3..727da4c 100644
--- a/Lib/plat-irix6/FL.py
+++ b/Lib/plat-irix6/FL.py
@@ -7,9 +7,9 @@ _v20 = 1
 _v21 = 1
 ##import fl
 ##try:
-##	_v20 = (fl.get_rgbmode is not None)
+##      _v20 = (fl.get_rgbmode is not None)
 ##except:
-##	_v20 = 0
+##      _v20 = 0
 ##del fl
 
 NULL = 0
@@ -20,7 +20,7 @@ EVENT = -1
 
 LABEL_SIZE = 64
 if _v20:
-	SHORTCUT_SIZE = 32
+    SHORTCUT_SIZE = 32
 PLACE_FREE = 0
 PLACE_SIZE = 1
 PLACE_ASPECT = 2
@@ -119,7 +119,7 @@ TOUCH_BUTTON = 4
 INOUT_BUTTON = 5
 RETURN_BUTTON = 6
 if _v20:
-	HIDDEN_RET_BUTTON = 7
+    HIDDEN_RET_BUTTON = 7
 BUTTON_BOXTYPE = UP_BOX
 BUTTON_COL1 = COL1
 BUTTON_COL2 = COL1
@@ -129,20 +129,20 @@ BUTTON_MCOL1 = MCOL
 BUTTON_MCOL2 = MCOL
 BUTTON_BW = BOUND_WIDTH
 if _v20:
-	CHART = 4
-	BAR_CHART = 0
-	HORBAR_CHART = 1
-	LINE_CHART = 2
-	FILLED_CHART = 3
-	SPIKE_CHART = 4
-	PIE_CHART = 5
-	SPECIALPIE_CHART = 6
-	CHART_BOXTYPE = BORDER_BOX
-	CHART_COL1 = COL1
-	CHART_LCOL = LCOL
-	CHART_ALIGN = ALIGN_BOTTOM
-	CHART_BW = BOUND_WIDTH
-	CHART_MAX = 128
+    CHART = 4
+    BAR_CHART = 0
+    HORBAR_CHART = 1
+    LINE_CHART = 2
+    FILLED_CHART = 3
+    SPIKE_CHART = 4
+    PIE_CHART = 5
+    SPECIALPIE_CHART = 6
+    CHART_BOXTYPE = BORDER_BOX
+    CHART_COL1 = COL1
+    CHART_LCOL = LCOL
+    CHART_ALIGN = ALIGN_BOTTOM
+    CHART_BW = BOUND_WIDTH
+    CHART_MAX = 128
 CHOICE = 42
 NORMAL_CHOICE = 0
 CHOICE_BOXTYPE = DOWN_BOX
@@ -173,11 +173,11 @@ COUNTER_COL2 = 4
 COUNTER_LCOL = LCOL
 COUNTER_ALIGN = ALIGN_BOTTOM
 if _v20:
-	COUNTER_BW = BOUND_WIDTH
+    COUNTER_BW = BOUND_WIDTH
 else:
-	DEFAULT = 51
-	RETURN_DEFAULT = 0
-	ALWAYS_DEFAULT = 1
+    DEFAULT = 51
+    RETURN_DEFAULT = 0
+    ALWAYS_DEFAULT = 1
 DIAL = 22
 NORMAL_DIAL = 0
 LINE_DIAL = 1
@@ -197,14 +197,14 @@ ALL_FREE = 5
 INPUT = 31
 NORMAL_INPUT = 0
 if _v20:
-	FLOAT_INPUT = 1
-	INT_INPUT = 2
-	HIDDEN_INPUT = 3
-	if _v21:
-		MULTILINE_INPUT = 4
-		SECRET_INPUT = 5
+    FLOAT_INPUT = 1
+    INT_INPUT = 2
+    HIDDEN_INPUT = 3
+    if _v21:
+        MULTILINE_INPUT = 4
+        SECRET_INPUT = 5
 else:
-	ALWAYS_INPUT = 1
+    ALWAYS_INPUT = 1
 INPUT_BOXTYPE = DOWN_BOX
 INPUT_COL1 = 13
 INPUT_COL2 = 5
diff --git a/Lib/plat-irix6/SV.py b/Lib/plat-irix6/SV.py
index 08fb917..db8efe5 100644
--- a/Lib/plat-irix6/SV.py
+++ b/Lib/plat-irix6/SV.py
@@ -7,16 +7,16 @@ BLANKING_BUFFER_SIZE = 2
 MAX_SOURCES = 2
 
 # mode parameter for Bind calls
-IN_OFF = 0				# No Video
-IN_OVER = 1				# Video over graphics
-IN_UNDER = 2				# Video under graphics
-IN_REPLACE = 3				# Video replaces entire win
+IN_OFF = 0                              # No Video
+IN_OVER = 1                             # Video over graphics
+IN_UNDER = 2                            # Video under graphics
+IN_REPLACE = 3                          # Video replaces entire win
 
 # mode parameters for LoadMap calls.  Specifies buffer, always 256 entries
-INPUT_COLORMAP = 0			# tuples of 8-bit RGB
-CHROMA_KEY_MAP = 1			# tuples of 8-bit RGB
-COLOR_SPACE_MAP = 2			# tuples of 8-bit RGB
-GAMMA_MAP = 3				# tuples of 24-bit red values
+INPUT_COLORMAP = 0                      # tuples of 8-bit RGB
+CHROMA_KEY_MAP = 1                      # tuples of 8-bit RGB
+COLOR_SPACE_MAP = 2                     # tuples of 8-bit RGB
+GAMMA_MAP = 3                           # tuples of 24-bit red values
 
 # mode parameters for UseExclusive calls
 INPUT = 0
@@ -24,9 +24,9 @@ OUTPUT = 1
 IN_OUT = 2
 
 # Format constants for the capture routines
-RGB8_FRAMES = 0				# noninterleaved 8 bit 3:2:3 RBG fields
-RGB32_FRAMES = 1			# 32-bit 8:8:8 RGB frames
-YUV411_FRAMES = 2			# interleaved, 8:2:2 YUV format
+RGB8_FRAMES = 0                         # noninterleaved 8 bit 3:2:3 RBG fields
+RGB32_FRAMES = 1                        # 32-bit 8:8:8 RGB frames
+YUV411_FRAMES = 2                       # interleaved, 8:2:2 YUV format
 YUV411_FRAMES_AND_BLANKING_BUFFER = 3
 
 #
diff --git a/Lib/plat-irix6/cddb.py b/Lib/plat-irix6/cddb.py
index 256927c..4588305 100644
--- a/Lib/plat-irix6/cddb.py
+++ b/Lib/plat-irix6/cddb.py
@@ -20,185 +20,185 @@ _cddbrc = '.cddb'
 _DB_ID_NTRACKS = 5
 _dbid_map = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ@_=+abcdefghijklmnopqrstuvwxyz'
 def _dbid(v):
-	if v >= len(_dbid_map):
-		return string.zfill(v, 2)
-	else:
-		return _dbid_map[v]
+    if v >= len(_dbid_map):
+        return string.zfill(v, 2)
+    else:
+        return _dbid_map[v]
 
 def tochash(toc):
-	if type(toc) == type(''):
-		tracklist = []
-		for i in range(2, len(toc), 4):
-			tracklist.append((None,
-				  (int(toc[i:i+2]),
-				   int(toc[i+2:i+4]))))
-	else:
-		tracklist = toc
-	ntracks = len(tracklist)
-	hash = _dbid((ntracks >> 4) & 0xF) + _dbid(ntracks & 0xF)
-	if ntracks <= _DB_ID_NTRACKS:
-		nidtracks = ntracks
-	else:
-		nidtracks = _DB_ID_NTRACKS - 1
-		min = 0
-		sec = 0
-		for track in tracklist:
-			start, length = track
-			min = min + length[0]
-			sec = sec + length[1]
-		min = min + sec / 60
-		sec = sec % 60
-		hash = hash + _dbid(min) + _dbid(sec)
-	for i in range(nidtracks):
-		start, length = tracklist[i]
-		hash = hash + _dbid(length[0]) + _dbid(length[1])
-	return hash
-	
+    if type(toc) == type(''):
+        tracklist = []
+        for i in range(2, len(toc), 4):
+            tracklist.append((None,
+                      (int(toc[i:i+2]),
+                       int(toc[i+2:i+4]))))
+    else:
+        tracklist = toc
+    ntracks = len(tracklist)
+    hash = _dbid((ntracks >> 4) & 0xF) + _dbid(ntracks & 0xF)
+    if ntracks <= _DB_ID_NTRACKS:
+        nidtracks = ntracks
+    else:
+        nidtracks = _DB_ID_NTRACKS - 1
+        min = 0
+        sec = 0
+        for track in tracklist:
+            start, length = track
+            min = min + length[0]
+            sec = sec + length[1]
+        min = min + sec / 60
+        sec = sec % 60
+        hash = hash + _dbid(min) + _dbid(sec)
+    for i in range(nidtracks):
+        start, length = tracklist[i]
+        hash = hash + _dbid(length[0]) + _dbid(length[1])
+    return hash
+
 class Cddb:
-	def __init__(self, tracklist):
-		if os.environ.has_key('CDDB_PATH'):
-			path = os.environ['CDDB_PATH']
-			cddb_path = path.split(',')
-		else:
-			home = os.environ['HOME']
-			cddb_path = [home + '/' + _cddbrc]
+    def __init__(self, tracklist):
+        if os.environ.has_key('CDDB_PATH'):
+            path = os.environ['CDDB_PATH']
+            cddb_path = path.split(',')
+        else:
+            home = os.environ['HOME']
+            cddb_path = [home + '/' + _cddbrc]
 
-		self._get_id(tracklist)
+        self._get_id(tracklist)
 
-		for dir in cddb_path:
-			file = dir + '/' + self.id + '.rdb'
-			try:
-				f = open(file, 'r')
-				self.file = file
-				break
-			except IOError:
-				pass
-		ntracks = int(self.id[:2], 16)
-		self.artist = ''
-		self.title = ''
-		self.track = [None] + [''] * ntracks
-		self.trackartist = [None] + [''] * ntracks
-		self.notes = []
-		if not hasattr(self, 'file'):
-			return
-		import re
-		reg = re.compile(r'^([^.]*)\.([^:]*):[\t ]+(.*)')
-		while 1:
-			line = f.readline()
-			if not line:
-				break
-			match = reg.match(line)
-			if not match:
-				print 'syntax error in ' + file
-				continue
-			name1, name2, value = match.group(1, 2, 3)
-			if name1 == 'album':
-				if name2 == 'artist':
-					self.artist = value
-				elif name2 == 'title':
-					self.title = value
-				elif name2 == 'toc':
-					if not self.toc:
-						self.toc = value
-					if self.toc != value:
-						print 'toc\'s don\'t match'
-				elif name2 == 'notes':
-					self.notes.append(value)
-			elif name1[:5] == 'track':
-				try:
-					trackno = int(name1[5:])
-				except ValueError:
-					print 'syntax error in ' + file
-					continue
-				if trackno > ntracks:
-					print 'track number %r in file %s out of range' % (trackno, file)
-					continue
-				if name2 == 'title':
-					self.track[trackno] = value
-				elif name2 == 'artist':
-					self.trackartist[trackno] = value
-		f.close()
-		for i in range(2, len(self.track)):
-			track = self.track[i]
-			# if track title starts with `,', use initial part
-			# of previous track's title
-			if track and track[0] == ',':
-				try:
-					off = self.track[i - 1].index(',')
-				except ValueError:
-					pass
-				else:
-					self.track[i] = self.track[i-1][:off] \
-							+ track
+        for dir in cddb_path:
+            file = dir + '/' + self.id + '.rdb'
+            try:
+                f = open(file, 'r')
+                self.file = file
+                break
+            except IOError:
+                pass
+        ntracks = int(self.id[:2], 16)
+        self.artist = ''
+        self.title = ''
+        self.track = [None] + [''] * ntracks
+        self.trackartist = [None] + [''] * ntracks
+        self.notes = []
+        if not hasattr(self, 'file'):
+            return
+        import re
+        reg = re.compile(r'^([^.]*)\.([^:]*):[\t ]+(.*)')
+        while 1:
+            line = f.readline()
+            if not line:
+                break
+            match = reg.match(line)
+            if not match:
+                print 'syntax error in ' + file
+                continue
+            name1, name2, value = match.group(1, 2, 3)
+            if name1 == 'album':
+                if name2 == 'artist':
+                    self.artist = value
+                elif name2 == 'title':
+                    self.title = value
+                elif name2 == 'toc':
+                    if not self.toc:
+                        self.toc = value
+                    if self.toc != value:
+                        print 'toc\'s don\'t match'
+                elif name2 == 'notes':
+                    self.notes.append(value)
+            elif name1[:5] == 'track':
+                try:
+                    trackno = int(name1[5:])
+                except ValueError:
+                    print 'syntax error in ' + file
+                    continue
+                if trackno > ntracks:
+                    print 'track number %r in file %s out of range' % (trackno, file)
+                    continue
+                if name2 == 'title':
+                    self.track[trackno] = value
+                elif name2 == 'artist':
+                    self.trackartist[trackno] = value
+        f.close()
+        for i in range(2, len(self.track)):
+            track = self.track[i]
+            # if track title starts with `,', use initial part
+            # of previous track's title
+            if track and track[0] == ',':
+                try:
+                    off = self.track[i - 1].index(',')
+                except ValueError:
+                    pass
+                else:
+                    self.track[i] = self.track[i-1][:off] \
+                                    + track
 
-	def _get_id(self, tracklist):
-		# fill in self.id and self.toc.
-		# if the argument is a string ending in .rdb, the part
-		# upto the suffix is taken as the id.
-		if type(tracklist) == type(''):
-			if tracklist[-4:] == '.rdb':
-				self.id = tracklist[:-4]
-				self.toc = ''
-				return
-			t = []
-			for i in range(2, len(tracklist), 4):
-				t.append((None, \
-					  (int(tracklist[i:i+2]), \
-					   int(tracklist[i+2:i+4]))))
-			tracklist = t
-		ntracks = len(tracklist)
-		self.id = _dbid((ntracks >> 4) & 0xF) + _dbid(ntracks & 0xF)
-		if ntracks <= _DB_ID_NTRACKS:
-			nidtracks = ntracks
-		else:
-			nidtracks = _DB_ID_NTRACKS - 1
-			min = 0
-			sec = 0
-			for track in tracklist:
-				start, length = track
-				min = min + length[0]
-				sec = sec + length[1]
-			min = min + sec / 60
-			sec = sec % 60
-			self.id = self.id + _dbid(min) + _dbid(sec)
-		for i in range(nidtracks):
-			start, length = tracklist[i]
-			self.id = self.id + _dbid(length[0]) + _dbid(length[1])
-		self.toc = string.zfill(ntracks, 2)
-		for track in tracklist:
-			start, length = track
-			self.toc = self.toc + string.zfill(length[0], 2) + \
-				  string.zfill(length[1], 2)
+    def _get_id(self, tracklist):
+        # fill in self.id and self.toc.
+        # if the argument is a string ending in .rdb, the part
+        # upto the suffix is taken as the id.
+        if type(tracklist) == type(''):
+            if tracklist[-4:] == '.rdb':
+                self.id = tracklist[:-4]
+                self.toc = ''
+                return
+            t = []
+            for i in range(2, len(tracklist), 4):
+                t.append((None, \
+                          (int(tracklist[i:i+2]), \
+                           int(tracklist[i+2:i+4]))))
+            tracklist = t
+        ntracks = len(tracklist)
+        self.id = _dbid((ntracks >> 4) & 0xF) + _dbid(ntracks & 0xF)
+        if ntracks <= _DB_ID_NTRACKS:
+            nidtracks = ntracks
+        else:
+            nidtracks = _DB_ID_NTRACKS - 1
+            min = 0
+            sec = 0
+            for track in tracklist:
+                start, length = track
+                min = min + length[0]
+                sec = sec + length[1]
+            min = min + sec / 60
+            sec = sec % 60
+            self.id = self.id + _dbid(min) + _dbid(sec)
+        for i in range(nidtracks):
+            start, length = tracklist[i]
+            self.id = self.id + _dbid(length[0]) + _dbid(length[1])
+        self.toc = string.zfill(ntracks, 2)
+        for track in tracklist:
+            start, length = track
+            self.toc = self.toc + string.zfill(length[0], 2) + \
+                      string.zfill(length[1], 2)
 
-	def write(self):
-		import posixpath
-		if os.environ.has_key('CDDB_WRITE_DIR'):
-			dir = os.environ['CDDB_WRITE_DIR']
-		else:
-			dir = os.environ['HOME'] + '/' + _cddbrc
-		file = dir + '/' + self.id + '.rdb'
-		if posixpath.exists(file):
-			# make backup copy
-			posix.rename(file, file + '~')
-		f = open(file, 'w')
-		f.write('album.title:\t' + self.title + '\n')
-		f.write('album.artist:\t' + self.artist + '\n')
-		f.write('album.toc:\t' + self.toc + '\n')
-		for note in self.notes:
-			f.write('album.notes:\t' + note + '\n')
-		prevpref = None
-		for i in range(1, len(self.track)):
-			if self.trackartist[i]:
-				f.write('track%r.artist:\t%s\n' % (i, self.trackartist[i]))
-			track = self.track[i]
-			try:
-				off = track.index(',')
-			except ValueError:
-				prevpref = None
-			else:
-				if prevpref and track[:off] == prevpref:
-					track = track[off:]
-				else:
-					prevpref = track[:off]
-			f.write('track%r.title:\t%s\n' % (i, track))
-		f.close()
+    def write(self):
+        import posixpath
+        if os.environ.has_key('CDDB_WRITE_DIR'):
+            dir = os.environ['CDDB_WRITE_DIR']
+        else:
+            dir = os.environ['HOME'] + '/' + _cddbrc
+        file = dir + '/' + self.id + '.rdb'
+        if posixpath.exists(file):
+            # make backup copy
+            posix.rename(file, file + '~')
+        f = open(file, 'w')
+        f.write('album.title:\t' + self.title + '\n')
+        f.write('album.artist:\t' + self.artist + '\n')
+        f.write('album.toc:\t' + self.toc + '\n')
+        for note in self.notes:
+            f.write('album.notes:\t' + note + '\n')
+        prevpref = None
+        for i in range(1, len(self.track)):
+            if self.trackartist[i]:
+                f.write('track%r.artist:\t%s\n' % (i, self.trackartist[i]))
+            track = self.track[i]
+            try:
+                off = track.index(',')
+            except ValueError:
+                prevpref = None
+            else:
+                if prevpref and track[:off] == prevpref:
+                    track = track[off:]
+                else:
+                    prevpref = track[:off]
+            f.write('track%r.title:\t%s\n' % (i, track))
+        f.close()
diff --git a/Lib/plat-irix6/cdplayer.py b/Lib/plat-irix6/cdplayer.py
index 4ba3f51..d4bc732 100644
--- a/Lib/plat-irix6/cdplayer.py
+++ b/Lib/plat-irix6/cdplayer.py
@@ -17,72 +17,72 @@
 cdplayerrc = '.cdplayerrc'
 
 class Cdplayer:
-	def __init__(self, tracklist):
-		import string
-		self.artist = ''
-		self.title = ''
-		if type(tracklist) == type(''):
-			t = []
-			for i in range(2, len(tracklist), 4):
-				t.append((None, \
-					  (int(tracklist[i:i+2]), \
-					   int(tracklist[i+2:i+4]))))
-			tracklist = t
-		self.track = [None] + [''] * len(tracklist)
-		self.id = 'd' + string.zfill(len(tracklist), 2)
-		for track in tracklist:
-			start, length = track
-			self.id = self.id + string.zfill(length[0], 2) + \
-				  string.zfill(length[1], 2)
-		try:
-			import posix
-			f = open(posix.environ['HOME'] + '/' + cdplayerrc, 'r')
-		except IOError:
-			return
-		import re
-		reg = re.compile(r'^([^:]*):\t(.*)')
-		s = self.id + '.'
-		l = len(s)
-		while 1:
-			line = f.readline()
-			if line == '':
-				break
-			if line[:l] == s:
-				line = line[l:]
-				match = reg.match(line)
-				if not match:
-					print 'syntax error in ~/' + cdplayerrc
-					continue
-				name, value = match.group(1, 2)
-				if name == 'title':
-					self.title = value
-				elif name == 'artist':
-					self.artist = value
-				elif name[:5] == 'track':
-					trackno = int(name[6:])
-					self.track[trackno] = value
-		f.close()
+    def __init__(self, tracklist):
+        import string
+        self.artist = ''
+        self.title = ''
+        if type(tracklist) == type(''):
+            t = []
+            for i in range(2, len(tracklist), 4):
+                t.append((None, \
+                          (int(tracklist[i:i+2]), \
+                           int(tracklist[i+2:i+4]))))
+            tracklist = t
+        self.track = [None] + [''] * len(tracklist)
+        self.id = 'd' + string.zfill(len(tracklist), 2)
+        for track in tracklist:
+            start, length = track
+            self.id = self.id + string.zfill(length[0], 2) + \
+                      string.zfill(length[1], 2)
+        try:
+            import posix
+            f = open(posix.environ['HOME'] + '/' + cdplayerrc, 'r')
+        except IOError:
+            return
+        import re
+        reg = re.compile(r'^([^:]*):\t(.*)')
+        s = self.id + '.'
+        l = len(s)
+        while 1:
+            line = f.readline()
+            if line == '':
+                break
+            if line[:l] == s:
+                line = line[l:]
+                match = reg.match(line)
+                if not match:
+                    print 'syntax error in ~/' + cdplayerrc
+                    continue
+                name, value = match.group(1, 2)
+                if name == 'title':
+                    self.title = value
+                elif name == 'artist':
+                    self.artist = value
+                elif name[:5] == 'track':
+                    trackno = int(name[6:])
+                    self.track[trackno] = value
+        f.close()
 
-	def write(self):
-		import posix
-		filename = posix.environ['HOME'] + '/' + cdplayerrc
-		try:
-			old = open(filename, 'r')
-		except IOError:
-			old = open('/dev/null', 'r')
-		new = open(filename + '.new', 'w')
-		s = self.id + '.'
-		l = len(s)
-		while 1:
-			line = old.readline()
-			if line == '':
-				break
-			if line[:l] != s:
-				new.write(line)
-		new.write(self.id + '.title:\t' + self.title + '\n')
-		new.write(self.id + '.artist:\t' + self.artist + '\n')
-		for i in range(1, len(self.track)):
-			new.write('%s.track.%r:\t%s\n' % (i, track))
-		old.close()
-		new.close()
-		posix.rename(filename + '.new', filename)
+    def write(self):
+        import posix
+        filename = posix.environ['HOME'] + '/' + cdplayerrc
+        try:
+            old = open(filename, 'r')
+        except IOError:
+            old = open('/dev/null', 'r')
+        new = open(filename + '.new', 'w')
+        s = self.id + '.'
+        l = len(s)
+        while 1:
+            line = old.readline()
+            if line == '':
+                break
+            if line[:l] != s:
+                new.write(line)
+        new.write(self.id + '.title:\t' + self.title + '\n')
+        new.write(self.id + '.artist:\t' + self.artist + '\n')
+        for i in range(1, len(self.track)):
+            new.write('%s.track.%r:\t%s\n' % (i, track))
+        old.close()
+        new.close()
+        posix.rename(filename + '.new', filename)
diff --git a/Lib/plat-irix6/flp.py b/Lib/plat-irix6/flp.py
index aa23107..f745472 100644
--- a/Lib/plat-irix6/flp.py
+++ b/Lib/plat-irix6/flp.py
@@ -79,18 +79,18 @@ def checkcache(filename):
         fp.close()
 
 def _unpack_cache(altforms):
-        forms = {}
-        for name in altforms.keys():
-            altobj, altlist = altforms[name]
-            obj = _newobj()
-            obj.make(altobj)
-            list = []
-            for altobj in altlist:
-                nobj = _newobj()
-                nobj.make(altobj)
-                list.append(nobj)
-            forms[name] = obj, list
-        return forms
+    forms = {}
+    for name in altforms.keys():
+        altobj, altlist = altforms[name]
+        obj = _newobj()
+        obj.make(altobj)
+        list = []
+        for altobj in altlist:
+            nobj = _newobj()
+            nobj.make(altobj)
+            list.append(nobj)
+        forms[name] = obj, list
+    return forms
 
 def rdlong(fp):
     s = fp.read(4)
@@ -276,8 +276,8 @@ def _parse_line(line):
         return line
     name, value = match.group(1, 2)
     if name[0] == 'N':
-            name = ''.join(name.split())
-            name = name.lower()
+        name = ''.join(name.split())
+        name = name.lower()
     name = name.capitalize()
     try:
         pf = _parse_func[name]
@@ -291,7 +291,7 @@ def _readline(file):
     if not line:
         raise EOFError
     return line[:-1]
-        
+
 def _parse_1_line(file):
     line = _readline(file)
     while line == '':
diff --git a/Lib/plat-irix6/jpeg.py b/Lib/plat-irix6/jpeg.py
index 2354f40..0b52031 100644
--- a/Lib/plat-irix6/jpeg.py
+++ b/Lib/plat-irix6/jpeg.py
@@ -6,7 +6,7 @@
 # XXX the resulting file causes weirdness.
 
 class error(Exception):
-	pass
+    pass
 
 options = {'quality': 75, 'optimize': 0, 'smooth': 0, 'forcegray': 0}
 
@@ -14,98 +14,98 @@ comp = None
 decomp = None
 
 def compress(imgdata, width, height, bytesperpixel):
-	global comp
-	import cl
-	if comp is None: comp = cl.OpenCompressor(cl.JPEG)
-	if bytesperpixel == 1:
-		format = cl.GRAYSCALE
-	elif bytesperpixel == 4:
-		format = cl.RGBX
-	if options['forcegray']:
-		iformat = cl.GRAYSCALE
-	else:
-		iformat = cl.YUV
-	# XXX How to support 'optimize'?
-	params = [cl.IMAGE_WIDTH, width, cl.IMAGE_HEIGHT, height,
-		  cl.ORIGINAL_FORMAT, format,
-		  cl.ORIENTATION, cl.BOTTOM_UP,
-		  cl.QUALITY_FACTOR, options['quality'],
-		  cl.INTERNAL_FORMAT, iformat,
-		 ]
-	comp.SetParams(params)
-	jpegdata = comp.Compress(1, imgdata)
-	return jpegdata
+    global comp
+    import cl
+    if comp is None: comp = cl.OpenCompressor(cl.JPEG)
+    if bytesperpixel == 1:
+        format = cl.GRAYSCALE
+    elif bytesperpixel == 4:
+        format = cl.RGBX
+    if options['forcegray']:
+        iformat = cl.GRAYSCALE
+    else:
+        iformat = cl.YUV
+    # XXX How to support 'optimize'?
+    params = [cl.IMAGE_WIDTH, width, cl.IMAGE_HEIGHT, height,
+              cl.ORIGINAL_FORMAT, format,
+              cl.ORIENTATION, cl.BOTTOM_UP,
+              cl.QUALITY_FACTOR, options['quality'],
+              cl.INTERNAL_FORMAT, iformat,
+             ]
+    comp.SetParams(params)
+    jpegdata = comp.Compress(1, imgdata)
+    return jpegdata
 
 def decompress(jpegdata):
-	global decomp
-	import cl
-	if decomp is None: decomp = cl.OpenDecompressor(cl.JPEG)
-	headersize = decomp.ReadHeader(jpegdata)
-	params = [cl.IMAGE_WIDTH, 0, cl.IMAGE_HEIGHT, 0, cl.INTERNAL_FORMAT, 0]
-	decomp.GetParams(params)
-	width, height, format = params[1], params[3], params[5]
-	if format == cl.GRAYSCALE or options['forcegray']:
-		format = cl.GRAYSCALE
-		bytesperpixel = 1
-	else:
-		format = cl.RGBX
-		bytesperpixel = 4
-	# XXX How to support 'smooth'?
-	params = [cl.ORIGINAL_FORMAT, format,
-		  cl.ORIENTATION, cl.BOTTOM_UP,
-		  cl.FRAME_BUFFER_SIZE, width*height*bytesperpixel]
-	decomp.SetParams(params)
-	imgdata = decomp.Decompress(1, jpegdata)
-	return imgdata, width, height, bytesperpixel
+    global decomp
+    import cl
+    if decomp is None: decomp = cl.OpenDecompressor(cl.JPEG)
+    headersize = decomp.ReadHeader(jpegdata)
+    params = [cl.IMAGE_WIDTH, 0, cl.IMAGE_HEIGHT, 0, cl.INTERNAL_FORMAT, 0]
+    decomp.GetParams(params)
+    width, height, format = params[1], params[3], params[5]
+    if format == cl.GRAYSCALE or options['forcegray']:
+        format = cl.GRAYSCALE
+        bytesperpixel = 1
+    else:
+        format = cl.RGBX
+        bytesperpixel = 4
+    # XXX How to support 'smooth'?
+    params = [cl.ORIGINAL_FORMAT, format,
+              cl.ORIENTATION, cl.BOTTOM_UP,
+              cl.FRAME_BUFFER_SIZE, width*height*bytesperpixel]
+    decomp.SetParams(params)
+    imgdata = decomp.Decompress(1, jpegdata)
+    return imgdata, width, height, bytesperpixel
 
 def setoption(name, value):
-	if type(value) is not type(0):
-		raise TypeError, 'jpeg.setoption: numeric options only'
-	if name == 'forcegrey':
-		name = 'forcegray'
-	if not options.has_key(name):
-		raise KeyError, 'jpeg.setoption: unknown option name'
-	options[name] = int(value)
+    if type(value) is not type(0):
+        raise TypeError, 'jpeg.setoption: numeric options only'
+    if name == 'forcegrey':
+        name = 'forcegray'
+    if not options.has_key(name):
+        raise KeyError, 'jpeg.setoption: unknown option name'
+    options[name] = int(value)
 
 def test():
-	import sys
-	if sys.argv[1:2] == ['-g']:
-		del sys.argv[1]
-		setoption('forcegray', 1)
-	if not sys.argv[1:]:
-		sys.argv.append('/usr/local/images/data/jpg/asterix.jpg')
-	for file in sys.argv[1:]:
-		show(file)
+    import sys
+    if sys.argv[1:2] == ['-g']:
+        del sys.argv[1]
+        setoption('forcegray', 1)
+    if not sys.argv[1:]:
+        sys.argv.append('/usr/local/images/data/jpg/asterix.jpg')
+    for file in sys.argv[1:]:
+        show(file)
 
 def show(file):
-	import gl, GL, DEVICE
-	jpegdata = open(file, 'r').read()
-	imgdata, width, height, bytesperpixel = decompress(jpegdata)
-	gl.foreground()
-	gl.prefsize(width, height)
-	win = gl.winopen(file)
-	if bytesperpixel == 1:
-		gl.cmode()
-		gl.pixmode(GL.PM_SIZE, 8)
-		gl.gconfig()
-		for i in range(256):
-			gl.mapcolor(i, i, i, i)
-	else:
-		gl.RGBmode()
-		gl.pixmode(GL.PM_SIZE, 32)
-		gl.gconfig()
-	gl.qdevice(DEVICE.REDRAW)
-	gl.qdevice(DEVICE.ESCKEY)
-	gl.qdevice(DEVICE.WINQUIT)
-	gl.qdevice(DEVICE.WINSHUT)
-	gl.lrectwrite(0, 0, width-1, height-1, imgdata)
-	while 1:
-		dev, val = gl.qread()
-		if dev in (DEVICE.ESCKEY, DEVICE.WINSHUT, DEVICE.WINQUIT):
-			break
-		if dev == DEVICE.REDRAW:
-			gl.lrectwrite(0, 0, width-1, height-1, imgdata)
-	gl.winclose(win)
-	# Now test the compression and write the result to a fixed filename
-	newjpegdata = compress(imgdata, width, height, bytesperpixel)
-	open('/tmp/j.jpg', 'w').write(newjpegdata)
+    import gl, GL, DEVICE
+    jpegdata = open(file, 'r').read()
+    imgdata, width, height, bytesperpixel = decompress(jpegdata)
+    gl.foreground()
+    gl.prefsize(width, height)
+    win = gl.winopen(file)
+    if bytesperpixel == 1:
+        gl.cmode()
+        gl.pixmode(GL.PM_SIZE, 8)
+        gl.gconfig()
+        for i in range(256):
+            gl.mapcolor(i, i, i, i)
+    else:
+        gl.RGBmode()
+        gl.pixmode(GL.PM_SIZE, 32)
+        gl.gconfig()
+    gl.qdevice(DEVICE.REDRAW)
+    gl.qdevice(DEVICE.ESCKEY)
+    gl.qdevice(DEVICE.WINQUIT)
+    gl.qdevice(DEVICE.WINSHUT)
+    gl.lrectwrite(0, 0, width-1, height-1, imgdata)
+    while 1:
+        dev, val = gl.qread()
+        if dev in (DEVICE.ESCKEY, DEVICE.WINSHUT, DEVICE.WINQUIT):
+            break
+        if dev == DEVICE.REDRAW:
+            gl.lrectwrite(0, 0, width-1, height-1, imgdata)
+    gl.winclose(win)
+    # Now test the compression and write the result to a fixed filename
+    newjpegdata = compress(imgdata, width, height, bytesperpixel)
+    open('/tmp/j.jpg', 'w').write(newjpegdata)
diff --git a/Lib/plat-irix6/panel.py b/Lib/plat-irix6/panel.py
index 3aa7448..12e62a5 100644
--- a/Lib/plat-irix6/panel.py
+++ b/Lib/plat-irix6/panel.py
@@ -17,82 +17,82 @@ debug = 0
 # Test if an object is a list.
 #
 def is_list(x):
-	return type(x) == type([])
+    return type(x) == type([])
 
 
 # Reverse a list.
 #
 def reverse(list):
-	res = []
-	for item in list:
-		res.insert(0, item)
-	return res
+    res = []
+    for item in list:
+        res.insert(0, item)
+    return res
 
 
 # Get an attribute of a list, which may itself be another list.
 # Don't use 'prop' for name.
 #
 def getattrlist(list, name):
-	for item in list:
-		if item and is_list(item) and item[0] == name:
-			return item[1:]
-	return []
+    for item in list:
+        if item and is_list(item) and item[0] == name:
+            return item[1:]
+    return []
 
 
 # Get a property of a list, which may itself be another list.
 #
 def getproplist(list, name):
-	for item in list:
-		if item and is_list(item) and item[0] == 'prop':
-			if len(item) > 1 and item[1] == name:
-				return item[2:]
-	return []
+    for item in list:
+        if item and is_list(item) and item[0] == 'prop':
+            if len(item) > 1 and item[1] == name:
+                return item[2:]
+    return []
 
 
 # Test if an actuator description contains the property 'end-of-group'
 #
 def is_endgroup(list):
-	x = getproplist(list, 'end-of-group')
-	return (x and x[0] == '#t')
+    x = getproplist(list, 'end-of-group')
+    return (x and x[0] == '#t')
 
 
 # Neatly display an actuator definition given as S-expression
 # the prefix string is printed before each line.
 #
 def show_actuator(prefix, a):
-	for item in a:
-		if not is_list(item):
-			print prefix, item
-		elif item and item[0] == 'al':
-			print prefix, 'Subactuator list:'
-			for a in item[1:]:
-				show_actuator(prefix + '    ', a)
-		elif len(item) == 2:
-			print prefix, item[0], '=>', item[1]
-		elif len(item) == 3 and item[0] == 'prop':
-			print prefix, 'Prop', item[1], '=>',
-			print item[2]
-		else:
-			print prefix, '?', item
+    for item in a:
+        if not is_list(item):
+            print prefix, item
+        elif item and item[0] == 'al':
+            print prefix, 'Subactuator list:'
+            for a in item[1:]:
+                show_actuator(prefix + '    ', a)
+        elif len(item) == 2:
+            print prefix, item[0], '=>', item[1]
+        elif len(item) == 3 and item[0] == 'prop':
+            print prefix, 'Prop', item[1], '=>',
+            print item[2]
+        else:
+            print prefix, '?', item
 
 
 # Neatly display a panel.
 #
 def show_panel(prefix, p):
-	for item in p:
-		if not is_list(item):
-			print prefix, item
-		elif item and item[0] == 'al':
-			print prefix, 'Actuator list:'
-			for a in item[1:]:
-				show_actuator(prefix + '    ', a)
-		elif len(item) == 2:
-			print prefix, item[0], '=>', item[1]
-		elif len(item) == 3 and item[0] == 'prop':
-			print prefix, 'Prop', item[1], '=>',
-			print item[2]
-		else:
-			print prefix, '?', item
+    for item in p:
+        if not is_list(item):
+            print prefix, item
+        elif item and item[0] == 'al':
+            print prefix, 'Actuator list:'
+            for a in item[1:]:
+                show_actuator(prefix + '    ', a)
+        elif len(item) == 2:
+            print prefix, item[0], '=>', item[1]
+        elif len(item) == 3 and item[0] == 'prop':
+            print prefix, 'Prop', item[1], '=>',
+            print item[2]
+        else:
+            print prefix, '?', item
 
 
 # Exception raised by build_actuator or build_panel.
@@ -103,7 +103,7 @@ panel_error = 'panel error'
 # Dummy callback used to initialize the callbacks.
 #
 def dummy_callback(arg):
-	pass
+    pass
 
 
 # Assign attributes to members of the target.
@@ -111,60 +111,60 @@ def dummy_callback(arg):
 # The member name is the attribute name prefixed with the prefix.
 #
 def assign_members(target, attrlist, exclist, prefix):
-	for item in attrlist:
-		if is_list(item) and len(item) == 2 and item[0] not in exclist:
-			name, value = item[0], item[1]
-			ok = 1
-			if value[0] in '-0123456789':
-				value = eval(value)
-			elif value[0] == '"':
-				value = value[1:-1]
-			elif value == 'move-then-resize':
-				# Strange default set by Panel Editor...
-				ok = 0
-			else:
-				print 'unknown value', value, 'for', name
-				ok = 0
-			if ok:
-				lhs = 'target.' + prefix + name
-				stmt = lhs + '=' + repr(value)
-				if debug: print 'exec', stmt
-				try:
-					exec stmt + '\n'
-				except KeyboardInterrupt: # Don't catch this!
-					raise KeyboardInterrupt
-				except:
-					print 'assign failed:', stmt
+    for item in attrlist:
+        if is_list(item) and len(item) == 2 and item[0] not in exclist:
+            name, value = item[0], item[1]
+            ok = 1
+            if value[0] in '-0123456789':
+                value = eval(value)
+            elif value[0] == '"':
+                value = value[1:-1]
+            elif value == 'move-then-resize':
+                # Strange default set by Panel Editor...
+                ok = 0
+            else:
+                print 'unknown value', value, 'for', name
+                ok = 0
+            if ok:
+                lhs = 'target.' + prefix + name
+                stmt = lhs + '=' + repr(value)
+                if debug: print 'exec', stmt
+                try:
+                    exec stmt + '\n'
+                except KeyboardInterrupt: # Don't catch this!
+                    raise KeyboardInterrupt
+                except:
+                    print 'assign failed:', stmt
 
 
 # Build a real actuator from an actuator description.
 # Return a pair (actuator, name).
 #
 def build_actuator(descr):
-	namelist = getattrlist(descr, 'name')
-	if namelist:
-		# Assume it is a string
-		actuatorname = namelist[0][1:-1]
-	else:
-		actuatorname = ''
-	type = descr[0]
-	if type[:4] == 'pnl_': type = type[4:]
-	act = pnl.mkact(type)
-	act.downfunc = act.activefunc = act.upfunc = dummy_callback
-	#
-	assign_members(act, descr[1:], ['al', 'data', 'name'], '')
-	#
-	# Treat actuator-specific data
-	#
-	datalist = getattrlist(descr, 'data')
-	prefix = ''
-	if type[-4:] == 'puck':
-		prefix = 'puck_'
-	elif type == 'mouse':
-		prefix = 'mouse_'
-	assign_members(act, datalist, [], prefix)
-	#
-	return act, actuatorname
+    namelist = getattrlist(descr, 'name')
+    if namelist:
+        # Assume it is a string
+        actuatorname = namelist[0][1:-1]
+    else:
+        actuatorname = ''
+    type = descr[0]
+    if type[:4] == 'pnl_': type = type[4:]
+    act = pnl.mkact(type)
+    act.downfunc = act.activefunc = act.upfunc = dummy_callback
+    #
+    assign_members(act, descr[1:], ['al', 'data', 'name'], '')
+    #
+    # Treat actuator-specific data
+    #
+    datalist = getattrlist(descr, 'data')
+    prefix = ''
+    if type[-4:] == 'puck':
+        prefix = 'puck_'
+    elif type == 'mouse':
+        prefix = 'mouse_'
+    assign_members(act, datalist, [], prefix)
+    #
+    return act, actuatorname
 
 
 # Build all sub-actuators and add them to the super-actuator.
@@ -176,27 +176,27 @@ def build_actuator(descr):
 # to a sub-actuator.
 #
 def build_subactuators(panel, super_act, al):
-	#
-	# This is nearly the same loop as below in build_panel(),
-	# except a call is made to addsubact() instead of addact().
-	#
-	for a in al:
-		act, name = build_actuator(a)
-		act.addsubact(super_act)
-		if name:
-			stmt = 'panel.' + name + ' = act'
-			if debug: print 'exec', stmt
-			exec stmt + '\n'
-		if is_endgroup(a):
-			panel.endgroup()
-		sub_al = getattrlist(a, 'al')
-		if sub_al:
-			build_subactuators(panel, act, sub_al)
-	#
-	# Fix the actuator to which whe just added subactuators.
-	# This can't hurt (I hope) and is needed for the scroll actuator.
-	#
-	super_act.fixact()
+    #
+    # This is nearly the same loop as below in build_panel(),
+    # except a call is made to addsubact() instead of addact().
+    #
+    for a in al:
+        act, name = build_actuator(a)
+        act.addsubact(super_act)
+        if name:
+            stmt = 'panel.' + name + ' = act'
+            if debug: print 'exec', stmt
+            exec stmt + '\n'
+        if is_endgroup(a):
+            panel.endgroup()
+        sub_al = getattrlist(a, 'al')
+        if sub_al:
+            build_subactuators(panel, act, sub_al)
+    #
+    # Fix the actuator to which whe just added subactuators.
+    # This can't hurt (I hope) and is needed for the scroll actuator.
+    #
+    super_act.fixact()
 
 
 # Build a real panel from a panel definition.
@@ -204,78 +204,78 @@ def build_subactuators(panel, super_act, al):
 # reference to a.
 #
 def build_panel(descr):
-	#
-	# Sanity check
-	#
-	if (not descr) or descr[0] != 'panel':
-		raise panel_error, 'panel description must start with "panel"'
-	#
-	if debug: show_panel('', descr)
-	#
-	# Create an empty panel
-	#
-	panel = pnl.mkpanel()
-	#
-	# Assign panel attributes
-	#
-	assign_members(panel, descr[1:], ['al'], '')
-	#
-	# Look for actuator list
-	#
-	al = getattrlist(descr, 'al')
-	#
-	# The order in which actuators are created is important
-	# because of the endgroup() operator.
-	# Unfortunately the Panel Editor outputs the actuator list
-	# in reverse order, so we reverse it here.
-	#
-	al = reverse(al)
-	#
-	for a in al:
-		act, name = build_actuator(a)
-		act.addact(panel)
-		if name:
-			stmt = 'panel.' + name + ' = act'
-			exec stmt + '\n'
-		if is_endgroup(a):
-			panel.endgroup()
-		sub_al = getattrlist(a, 'al')
-		if sub_al:
-			build_subactuators(panel, act, sub_al)
-	#
-	return panel
+    #
+    # Sanity check
+    #
+    if (not descr) or descr[0] != 'panel':
+        raise panel_error, 'panel description must start with "panel"'
+    #
+    if debug: show_panel('', descr)
+    #
+    # Create an empty panel
+    #
+    panel = pnl.mkpanel()
+    #
+    # Assign panel attributes
+    #
+    assign_members(panel, descr[1:], ['al'], '')
+    #
+    # Look for actuator list
+    #
+    al = getattrlist(descr, 'al')
+    #
+    # The order in which actuators are created is important
+    # because of the endgroup() operator.
+    # Unfortunately the Panel Editor outputs the actuator list
+    # in reverse order, so we reverse it here.
+    #
+    al = reverse(al)
+    #
+    for a in al:
+        act, name = build_actuator(a)
+        act.addact(panel)
+        if name:
+            stmt = 'panel.' + name + ' = act'
+            exec stmt + '\n'
+        if is_endgroup(a):
+            panel.endgroup()
+        sub_al = getattrlist(a, 'al')
+        if sub_al:
+            build_subactuators(panel, act, sub_al)
+    #
+    return panel
 
 
 # Wrapper around pnl.dopanel() which calls call-back functions.
 #
 def my_dopanel():
-	# Extract only the first 4 elements to allow for future expansion
-	a, down, active, up = pnl.dopanel()[:4]
-	if down:
-		down.downfunc(down)
-	if active:
-		active.activefunc(active)
-	if up:
-		up.upfunc(up)
-	return a
+    # Extract only the first 4 elements to allow for future expansion
+    a, down, active, up = pnl.dopanel()[:4]
+    if down:
+        down.downfunc(down)
+    if active:
+        active.activefunc(active)
+    if up:
+        up.upfunc(up)
+    return a
 
 
 # Create one or more panels from a description file (S-expressions)
 # generated by the Panel Editor.
-# 
+#
 def defpanellist(file):
-	import panelparser
-	descrlist = panelparser.parse_file(open(file, 'r'))
-	panellist = []
-	for descr in descrlist:
-		panellist.append(build_panel(descr))
-	return panellist
+    import panelparser
+    descrlist = panelparser.parse_file(open(file, 'r'))
+    panellist = []
+    for descr in descrlist:
+        panellist.append(build_panel(descr))
+    return panellist
 
 
 # Import everything from built-in method pnl, so the user can always
 # use panel.foo() instead of pnl.foo().
 # This gives *no* performance penalty once this module is imported.
 #
-from pnl import *			# for export
+from pnl import *                       # for export
 
-dopanel = my_dopanel			# override pnl.dopanel
+dopanel = my_dopanel                    # override pnl.dopanel
diff --git a/Lib/plat-irix6/panelparser.py b/Lib/plat-irix6/panelparser.py
index ee50971..c831c49 100644
--- a/Lib/plat-irix6/panelparser.py
+++ b/Lib/plat-irix6/panelparser.py
@@ -15,47 +15,47 @@ separators = operators + whitespace + ';' + '"'
 # Return a list of tokens (strings).
 #
 def tokenize_string(s):
-	tokens = []
-	while s:
-		c = s[:1]
-		if c in whitespace:
-			s = s[1:]
-		elif c == ';':
-			s = ''
-		elif c == '"':
-			n = len(s)
-			i = 1
-			while i < n:
-				c = s[i]
-				i = i+1
-				if c == '"': break
-				if c == '\\': i = i+1
-			tokens.append(s[:i])
-			s = s[i:]
-		elif c in operators:
-			tokens.append(c)
-			s = s[1:]
-		else:
-			n = len(s)
-			i = 1
-			while i < n:
-				if s[i] in separators: break
-				i = i+1
-			tokens.append(s[:i])
-			s = s[i:]
-	return tokens
+    tokens = []
+    while s:
+        c = s[:1]
+        if c in whitespace:
+            s = s[1:]
+        elif c == ';':
+            s = ''
+        elif c == '"':
+            n = len(s)
+            i = 1
+            while i < n:
+                c = s[i]
+                i = i+1
+                if c == '"': break
+                if c == '\\': i = i+1
+            tokens.append(s[:i])
+            s = s[i:]
+        elif c in operators:
+            tokens.append(c)
+            s = s[1:]
+        else:
+            n = len(s)
+            i = 1
+            while i < n:
+                if s[i] in separators: break
+                i = i+1
+            tokens.append(s[:i])
+            s = s[i:]
+    return tokens
 
 
 # Tokenize a whole file (given as file object, not as file name).
 # Return a list of tokens (strings).
 #
 def tokenize_file(fp):
-	tokens = []
-	while 1:
-		line = fp.readline()
-		if not line: break
-		tokens = tokens + tokenize_string(line)
-	return tokens
+    tokens = []
+    while 1:
+        line = fp.readline()
+        if not line: break
+        tokens = tokens + tokenize_string(line)
+    return tokens
 
 
 # Exception raised by parse_exr.
@@ -71,50 +71,50 @@ syntax_error = 'syntax error'
 # May raise syntax_error.
 #
 def parse_expr(tokens):
-	if (not tokens) or tokens[0] != '(':
-		raise syntax_error, 'expected "("'
-	tokens = tokens[1:]
-	expr = []
-	while 1:
-		if not tokens:
-			raise syntax_error, 'missing ")"'
-		if tokens[0] == ')':
-			return expr, tokens[1:]
-		elif tokens[0] == '(':
-			subexpr, tokens = parse_expr(tokens)
-			expr.append(subexpr)
-		else:
-			expr.append(tokens[0])
-			tokens = tokens[1:]
+    if (not tokens) or tokens[0] != '(':
+        raise syntax_error, 'expected "("'
+    tokens = tokens[1:]
+    expr = []
+    while 1:
+        if not tokens:
+            raise syntax_error, 'missing ")"'
+        if tokens[0] == ')':
+            return expr, tokens[1:]
+        elif tokens[0] == '(':
+            subexpr, tokens = parse_expr(tokens)
+            expr.append(subexpr)
+        else:
+            expr.append(tokens[0])
+            tokens = tokens[1:]
 
 
 # Parse a file (given as file object, not as file name).
 # Return a list of parsed S-expressions found at the top level.
 #
 def parse_file(fp):
-	tokens = tokenize_file(fp)
-	exprlist = []
-	while tokens:
-		expr, tokens = parse_expr(tokens)
-		exprlist.append(expr)
-	return exprlist
+    tokens = tokenize_file(fp)
+    exprlist = []
+    while tokens:
+        expr, tokens = parse_expr(tokens)
+        exprlist.append(expr)
+    return exprlist
 
 
 # EXAMPLE:
 #
 # The input
-#	'(hip (hop hur-ray))'
+#       '(hip (hop hur-ray))'
 #
 # passed to tokenize_string() returns the token list
-#	['(', 'hip', '(', 'hop', 'hur-ray', ')', ')']
+#       ['(', 'hip', '(', 'hop', 'hur-ray', ')', ')']
 #
 # When this is passed to parse_expr() it returns the expression
-#	['hip', ['hop', 'hur-ray']]
+#       ['hip', ['hop', 'hur-ray']]
 # plus an empty token list (because there are no tokens left.
 #
 # When a file containing the example is passed to parse_file() it returns
 # a list whose only element is the output of parse_expr() above:
-#	[['hip', ['hop', 'hur-ray']]]
+#       [['hip', ['hop', 'hur-ray']]]
 
 
 # TOKENIZING:
@@ -123,6 +123,6 @@ def parse_file(fp):
 #
 # Tokens are separated by whitespace, except the following characters
 # always form a separate token (outside strings):
-#	( ) '
+#       ( ) '
 # Strings are enclosed in double quotes (") and backslash (\) is used
 # as escape character in strings.
diff --git a/Lib/plat-irix6/readcd.py b/Lib/plat-irix6/readcd.py
index f278ba4..5453ce4 100644
--- a/Lib/plat-irix6/readcd.py
+++ b/Lib/plat-irix6/readcd.py
@@ -3,242 +3,242 @@
 import cd, CD
 
 class Error(Exception):
-	pass
+    pass
 class _Stop(Exception):
-	pass
+    pass
 
 def _doatime(self, cb_type, data):
-	if ((data[0] * 60) + data[1]) * 75 + data[2] > self.end:
-##		print 'done with list entry', repr(self.listindex)
-		raise _Stop
-	func, arg = self.callbacks[cb_type]
-	if func:
-		func(arg, cb_type, data)
+    if ((data[0] * 60) + data[1]) * 75 + data[2] > self.end:
+##              print 'done with list entry', repr(self.listindex)
+        raise _Stop
+    func, arg = self.callbacks[cb_type]
+    if func:
+        func(arg, cb_type, data)
 
 def _dopnum(self, cb_type, data):
-	if data > self.end:
-##		print 'done with list entry', repr(self.listindex)
-		raise _Stop
-	func, arg = self.callbacks[cb_type]
-	if func:
-		func(arg, cb_type, data)
+    if data > self.end:
+##              print 'done with list entry', repr(self.listindex)
+        raise _Stop
+    func, arg = self.callbacks[cb_type]
+    if func:
+        func(arg, cb_type, data)
 
 class Readcd:
-	def __init__(self, *arg):
-		if len(arg) == 0:
-			self.player = cd.open()
-		elif len(arg) == 1:
-			self.player = cd.open(arg[0])
-		elif len(arg) == 2:
-			self.player = cd.open(arg[0], arg[1])
-		else:
-			raise Error, 'bad __init__ call'
-		self.list = []
-		self.callbacks = [(None, None)] * 8
-		self.parser = cd.createparser()
-		self.playing = 0
-		self.end = 0
-		self.status = None
-		self.trackinfo = None
-
-	def eject(self):
-		self.player.eject()
-		self.list = []
-		self.end = 0
-		self.listindex = 0
-		self.status = None
-		self.trackinfo = None
-		if self.playing:
-##			print 'stop playing from eject'
-			raise _Stop
-
-	def pmsf2msf(self, track, min, sec, frame):
-		if not self.status:
-			self.cachestatus()
-		if track < self.status[5] or track > self.status[6]:
-			raise Error, 'track number out of range'
-		if not self.trackinfo:
-			self.cacheinfo()
-		start, total = self.trackinfo[track]
-		start = ((start[0] * 60) + start[1]) * 75 + start[2]
-		total = ((total[0] * 60) + total[1]) * 75 + total[2]
-		block = ((min * 60) + sec) * 75 + frame
-		if block > total:
-			raise Error, 'out of range'
-		block = start + block
-		min, block = divmod(block, 75*60)
-		sec, frame = divmod(block, 75)
-		return min, sec, frame
-
-	def reset(self):
-		self.list = []
-
-	def appendtrack(self, track):
-		self.appendstretch(track, track)
-				
-	def appendstretch(self, start, end):
-		if not self.status:
-			self.cachestatus()
-		if not start:
-			start = 1
-		if not end:
-			end = self.status[6]
-		if type(end) == type(0):
-			if end < self.status[5] or end > self.status[6]:
-				raise Error, 'range error'
-		else:
-			l = len(end)
-			if l == 4:
-				prog, min, sec, frame = end
-				if prog < self.status[5] or prog > self.status[6]:
-					raise Error, 'range error'
-				end = self.pmsf2msf(prog, min, sec, frame)
-			elif l != 3:
-				raise Error, 'syntax error'
-		if type(start) == type(0):
-			if start < self.status[5] or start > self.status[6]:
-				raise Error, 'range error'
-			if len(self.list) > 0:
-				s, e = self.list[-1]
-				if type(e) == type(0):
-					if start == e+1:
-						start = s
-						del self.list[-1]
-		else:
-			l = len(start)
-			if l == 4:
-				prog, min, sec, frame = start
-				if prog < self.status[5] or prog > self.status[6]:
-					raise Error, 'range error'
-				start = self.pmsf2msf(prog, min, sec, frame)
-			elif l != 3:
-				raise Error, 'syntax error'
-		self.list.append((start, end))
-
-	def settracks(self, list):
-		self.list = []
-		for track in list:
-			self.appendtrack(track)
-
-	def setcallback(self, cb_type, func, arg):
-		if cb_type < 0 or cb_type >= 8:
-			raise Error, 'type out of range'
-		self.callbacks[cb_type] = (func, arg)
-		if self.playing:
-			start, end = self.list[self.listindex]
-			if type(end) == type(0):
-				if cb_type != CD.PNUM:
-					self.parser.setcallback(cb_type, func, arg)
-			else:
-				if cb_type != CD.ATIME:
-					self.parser.setcallback(cb_type, func, arg)
-
-	def removecallback(self, cb_type):
-		if cb_type < 0 or cb_type >= 8:
-			raise Error, 'type out of range'
-		self.callbacks[cb_type] = (None, None)
-		if self.playing:
-			start, end = self.list[self.listindex]
-			if type(end) == type(0):
-				if cb_type != CD.PNUM:
-					self.parser.removecallback(cb_type)
-			else:
-				if cb_type != CD.ATIME:
-					self.parser.removecallback(cb_type)
-
-	def gettrackinfo(self, *arg):
-		if not self.status:
-			self.cachestatus()
-		if not self.trackinfo:
-			self.cacheinfo()
-		if len(arg) == 0:
-			return self.trackinfo[self.status[5]:self.status[6]+1]
-		result = []
-		for i in arg:
-			if i < self.status[5] or i > self.status[6]:
-				raise Error, 'range error'
-			result.append(self.trackinfo[i])
-		return result
-
-	def cacheinfo(self):
-		if not self.status:
-			self.cachestatus()
-		self.trackinfo = []
-		for i in range(self.status[5]):
-			self.trackinfo.append(None)
-		for i in range(self.status[5], self.status[6]+1):
-			self.trackinfo.append(self.player.gettrackinfo(i))
-
-	def cachestatus(self):
-		self.status = self.player.getstatus()
-		if self.status[0] == CD.NODISC:
-			self.status = None
-			raise Error, 'no disc in player'
-
-	def getstatus(self):
-		return self.player.getstatus()
-
-	def play(self):
-		if not self.status:
-			self.cachestatus()
-		size = self.player.bestreadsize()
-		self.listindex = 0
-		self.playing = 0
-		for i in range(8):
-			func, arg = self.callbacks[i]
-			if func:
-				self.parser.setcallback(i, func, arg)
-			else:
-				self.parser.removecallback(i)
-		if len(self.list) == 0:
-			for i in range(self.status[5], self.status[6]+1):
-				self.appendtrack(i)
-		try:
-			while 1:
-				if not self.playing:
-					if self.listindex >= len(self.list):
-						return
-					start, end = self.list[self.listindex]
-					if type(start) == type(0):
-						dummy = self.player.seektrack(
-							start)
-					else:
-						min, sec, frame = start
-						dummy = self.player.seek(
-							min, sec, frame)
-					if type(end) == type(0):
-						self.parser.setcallback(
-							CD.PNUM, _dopnum, self)
-						self.end = end
-						func, arg = \
-						      self.callbacks[CD.ATIME]
-						if func:
-							self.parser.setcallback(CD.ATIME, func, arg)
-						else:
-							self.parser.removecallback(CD.ATIME)
-					else:
-						min, sec, frame = end
-						self.parser.setcallback(
-							CD.ATIME, _doatime,
-							self)
-						self.end = (min * 60 + sec) * \
-							   75 + frame
-						func, arg = \
-						      self.callbacks[CD.PNUM]
-						if func:
-							self.parser.setcallback(CD.PNUM, func, arg)
-						else:
-							self.parser.removecallback(CD.PNUM)
-					self.playing = 1
-				data = self.player.readda(size)
-				if data == '':
-					self.playing = 0
-					self.listindex = self.listindex + 1
-					continue
-				try:
-					self.parser.parseframe(data)
-				except _Stop:
-					self.playing = 0
-					self.listindex = self.listindex + 1
-		finally:
-			self.playing = 0
+    def __init__(self, *arg):
+        if len(arg) == 0:
+            self.player = cd.open()
+        elif len(arg) == 1:
+            self.player = cd.open(arg[0])
+        elif len(arg) == 2:
+            self.player = cd.open(arg[0], arg[1])
+        else:
+            raise Error, 'bad __init__ call'
+        self.list = []
+        self.callbacks = [(None, None)] * 8
+        self.parser = cd.createparser()
+        self.playing = 0
+        self.end = 0
+        self.status = None
+        self.trackinfo = None
+
+    def eject(self):
+        self.player.eject()
+        self.list = []
+        self.end = 0
+        self.listindex = 0
+        self.status = None
+        self.trackinfo = None
+        if self.playing:
+##                      print 'stop playing from eject'
+            raise _Stop
+
+    def pmsf2msf(self, track, min, sec, frame):
+        if not self.status:
+            self.cachestatus()
+        if track < self.status[5] or track > self.status[6]:
+            raise Error, 'track number out of range'
+        if not self.trackinfo:
+            self.cacheinfo()
+        start, total = self.trackinfo[track]
+        start = ((start[0] * 60) + start[1]) * 75 + start[2]
+        total = ((total[0] * 60) + total[1]) * 75 + total[2]
+        block = ((min * 60) + sec) * 75 + frame
+        if block > total:
+            raise Error, 'out of range'
+        block = start + block
+        min, block = divmod(block, 75*60)
+        sec, frame = divmod(block, 75)
+        return min, sec, frame
+
+    def reset(self):
+        self.list = []
+
+    def appendtrack(self, track):
+        self.appendstretch(track, track)
+
+    def appendstretch(self, start, end):
+        if not self.status:
+            self.cachestatus()
+        if not start:
+            start = 1
+        if not end:
+            end = self.status[6]
+        if type(end) == type(0):
+            if end < self.status[5] or end > self.status[6]:
+                raise Error, 'range error'
+        else:
+            l = len(end)
+            if l == 4:
+                prog, min, sec, frame = end
+                if prog < self.status[5] or prog > self.status[6]:
+                    raise Error, 'range error'
+                end = self.pmsf2msf(prog, min, sec, frame)
+            elif l != 3:
+                raise Error, 'syntax error'
+        if type(start) == type(0):
+            if start < self.status[5] or start > self.status[6]:
+                raise Error, 'range error'
+            if len(self.list) > 0:
+                s, e = self.list[-1]
+                if type(e) == type(0):
+                    if start == e+1:
+                        start = s
+                        del self.list[-1]
+        else:
+            l = len(start)
+            if l == 4:
+                prog, min, sec, frame = start
+                if prog < self.status[5] or prog > self.status[6]:
+                    raise Error, 'range error'
+                start = self.pmsf2msf(prog, min, sec, frame)
+            elif l != 3:
+                raise Error, 'syntax error'
+        self.list.append((start, end))
+
+    def settracks(self, list):
+        self.list = []
+        for track in list:
+            self.appendtrack(track)
+
+    def setcallback(self, cb_type, func, arg):
+        if cb_type < 0 or cb_type >= 8:
+            raise Error, 'type out of range'
+        self.callbacks[cb_type] = (func, arg)
+        if self.playing:
+            start, end = self.list[self.listindex]
+            if type(end) == type(0):
+                if cb_type != CD.PNUM:
+                    self.parser.setcallback(cb_type, func, arg)
+            else:
+                if cb_type != CD.ATIME:
+                    self.parser.setcallback(cb_type, func, arg)
+
+    def removecallback(self, cb_type):
+        if cb_type < 0 or cb_type >= 8:
+            raise Error, 'type out of range'
+        self.callbacks[cb_type] = (None, None)
+        if self.playing:
+            start, end = self.list[self.listindex]
+            if type(end) == type(0):
+                if cb_type != CD.PNUM:
+                    self.parser.removecallback(cb_type)
+            else:
+                if cb_type != CD.ATIME:
+                    self.parser.removecallback(cb_type)
+
+    def gettrackinfo(self, *arg):
+        if not self.status:
+            self.cachestatus()
+        if not self.trackinfo:
+            self.cacheinfo()
+        if len(arg) == 0:
+            return self.trackinfo[self.status[5]:self.status[6]+1]
+        result = []
+        for i in arg:
+            if i < self.status[5] or i > self.status[6]:
+                raise Error, 'range error'
+            result.append(self.trackinfo[i])
+        return result
+
+    def cacheinfo(self):
+        if not self.status:
+            self.cachestatus()
+        self.trackinfo = []
+        for i in range(self.status[5]):
+            self.trackinfo.append(None)
+        for i in range(self.status[5], self.status[6]+1):
+            self.trackinfo.append(self.player.gettrackinfo(i))
+
+    def cachestatus(self):
+        self.status = self.player.getstatus()
+        if self.status[0] == CD.NODISC:
+            self.status = None
+            raise Error, 'no disc in player'
+
+    def getstatus(self):
+        return self.player.getstatus()
+
+    def play(self):
+        if not self.status:
+            self.cachestatus()
+        size = self.player.bestreadsize()
+        self.listindex = 0
+        self.playing = 0
+        for i in range(8):
+            func, arg = self.callbacks[i]
+            if func:
+                self.parser.setcallback(i, func, arg)
+            else:
+                self.parser.removecallback(i)
+        if len(self.list) == 0:
+            for i in range(self.status[5], self.status[6]+1):
+                self.appendtrack(i)
+        try:
+            while 1:
+                if not self.playing:
+                    if self.listindex >= len(self.list):
+                        return
+                    start, end = self.list[self.listindex]
+                    if type(start) == type(0):
+                        dummy = self.player.seektrack(
+                                start)
+                    else:
+                        min, sec, frame = start
+                        dummy = self.player.seek(
+                                min, sec, frame)
+                    if type(end) == type(0):
+                        self.parser.setcallback(
+                                CD.PNUM, _dopnum, self)
+                        self.end = end
+                        func, arg = \
+                              self.callbacks[CD.ATIME]
+                        if func:
+                            self.parser.setcallback(CD.ATIME, func, arg)
+                        else:
+                            self.parser.removecallback(CD.ATIME)
+                    else:
+                        min, sec, frame = end
+                        self.parser.setcallback(
+                                CD.ATIME, _doatime,
+                                self)
+                        self.end = (min * 60 + sec) * \
+                                   75 + frame
+                        func, arg = \
+                              self.callbacks[CD.PNUM]
+                        if func:
+                            self.parser.setcallback(CD.PNUM, func, arg)
+                        else:
+                            self.parser.removecallback(CD.PNUM)
+                    self.playing = 1
+                data = self.player.readda(size)
+                if data == '':
+                    self.playing = 0
+                    self.listindex = self.listindex + 1
+                    continue
+                try:
+                    self.parser.parseframe(data)
+                except _Stop:
+                    self.playing = 0
+                    self.listindex = self.listindex + 1
+        finally:
+            self.playing = 0
diff --git a/Lib/plat-irix6/torgb.py b/Lib/plat-irix6/torgb.py
index c2b1740..54c86c4 100644
--- a/Lib/plat-irix6/torgb.py
+++ b/Lib/plat-irix6/torgb.py
@@ -51,49 +51,49 @@ uncompress.append('uncompress', '--')
 
 
 class error(Exception):
-	pass
+    pass
 
 def torgb(filename):
-	temps = []
-	ret = None
-	try:
-		ret = _torgb(filename, temps)
-	finally:
-		for temp in temps[:]:
-			if temp != ret:
-				try:
-					os.unlink(temp)
-				except os.error:
-					pass
-				temps.remove(temp)
-	return ret
+    temps = []
+    ret = None
+    try:
+        ret = _torgb(filename, temps)
+    finally:
+        for temp in temps[:]:
+            if temp != ret:
+                try:
+                    os.unlink(temp)
+                except os.error:
+                    pass
+                temps.remove(temp)
+    return ret
 
 def _torgb(filename, temps):
-	if filename[-2:] == '.Z':
-		(fd, fname) = tempfile.mkstemp()
-		os.close(fd)
-		temps.append(fname)
-		sts = uncompress.copy(filename, fname)
-		if sts:
-			raise error, filename + ': uncompress failed'
-	else:
-		fname = filename
-	try:
-		ftype = imghdr.what(fname)
-	except IOError, msg:
-		if type(msg) == type(()) and len(msg) == 2 and \
-			type(msg[0]) == type(0) and type(msg[1]) == type(''):
-			msg = msg[1]
-		if type(msg) is not type(''):
-			msg = repr(msg)
-		raise error, filename + ': ' + msg
-	if ftype == 'rgb':
-		return fname
-	if ftype is None or not table.has_key(ftype):
-		raise error, '%s: unsupported image file type %r' % (filename, ftype)
-	(fd, temp) = tempfile.mkstemp()
-	os.close(fd)
-	sts = table[ftype].copy(fname, temp)
-	if sts:
-		raise error, filename + ': conversion to rgb failed'
-	return temp
+    if filename[-2:] == '.Z':
+        (fd, fname) = tempfile.mkstemp()
+        os.close(fd)
+        temps.append(fname)
+        sts = uncompress.copy(filename, fname)
+        if sts:
+            raise error, filename + ': uncompress failed'
+    else:
+        fname = filename
+    try:
+        ftype = imghdr.what(fname)
+    except IOError, msg:
+        if type(msg) == type(()) and len(msg) == 2 and \
+                type(msg[0]) == type(0) and type(msg[1]) == type(''):
+            msg = msg[1]
+        if type(msg) is not type(''):
+            msg = repr(msg)
+        raise error, filename + ': ' + msg
+    if ftype == 'rgb':
+        return fname
+    if ftype is None or not table.has_key(ftype):
+        raise error, '%s: unsupported image file type %r' % (filename, ftype)
+    (fd, temp) = tempfile.mkstemp()
+    os.close(fd)
+    sts = table[ftype].copy(fname, temp)
+    if sts:
+        raise error, filename + ': conversion to rgb failed'
+    return temp