bpo-31358: Pull zlib out of the repository (GH-3375)

Also enable building externals by default on Windows, use PCbuild\build.bat's -E option to disable it.

42 files changed, 0 insertions, 20508 deletions

diff --git a/Modules/zlib/ChangeLog b/Modules/zlib/ChangeLog
deleted file mode 100644
index 30199a6..0000000
--- a/Modules/zlib/ChangeLog
+++ /dev/null
@@ -1,1515 +0,0 @@
-
-                ChangeLog file for zlib
-
-Changes in 1.2.11 (15 Jan 2017)
-- Fix deflate stored bug when pulling last block from window
-- Permit immediate deflateParams changes before any deflate input
-
-Changes in 1.2.10 (2 Jan 2017)
-- Avoid warnings on snprintf() return value
-- Fix bug in deflate_stored() for zero-length input
-- Fix bug in gzwrite.c that produced corrupt gzip files
-- Remove files to be installed before copying them in Makefile.in
-- Add warnings when compiling with assembler code
-
-Changes in 1.2.9 (31 Dec 2016)
-- Fix contrib/minizip to permit unzipping with desktop API [Zouzou]
-- Improve contrib/blast to return unused bytes
-- Assure that gzoffset() is correct when appending
-- Improve compress() and uncompress() to support large lengths
-- Fix bug in test/example.c where error code not saved
-- Remedy Coverity warning [Randers-Pehrson]
-- Improve speed of gzprintf() in transparent mode
-- Fix inflateInit2() bug when windowBits is 16 or 32
-- Change DEBUG macro to ZLIB_DEBUG
-- Avoid uninitialized access by gzclose_w()
-- Allow building zlib outside of the source directory
-- Fix bug that accepted invalid zlib header when windowBits is zero
-- Fix gzseek() problem on MinGW due to buggy _lseeki64 there
-- Loop on write() calls in gzwrite.c in case of non-blocking I/O
-- Add --warn (-w) option to ./configure for more compiler warnings
-- Reject a window size of 256 bytes if not using the zlib wrapper
-- Fix bug when level 0 used with Z_HUFFMAN or Z_RLE
-- Add --debug (-d) option to ./configure to define ZLIB_DEBUG
-- Fix bugs in creating a very large gzip header
-- Add uncompress2() function, which returns the input size used
-- Assure that deflateParams() will not switch functions mid-block
-- Dramatically speed up deflation for level 0 (storing)
-- Add gzfread(), duplicating the interface of fread()
-- Add gzfwrite(), duplicating the interface of fwrite()
-- Add deflateGetDictionary() function
-- Use snprintf() for later versions of Microsoft C
-- Fix *Init macros to use z_ prefix when requested
-- Replace as400 with os400 for OS/400 support [Monnerat]
-- Add crc32_z() and adler32_z() functions with size_t lengths
-- Update Visual Studio project files [AraHaan]
-
-Changes in 1.2.8 (28 Apr 2013)
-- Update contrib/minizip/iowin32.c for Windows RT [Vollant]
-- Do not force Z_CONST for C++
-- Clean up contrib/vstudio [Roß]
-- Correct spelling error in zlib.h
-- Fix mixed line endings in contrib/vstudio
-
-Changes in 1.2.7.3 (13 Apr 2013)
-- Fix version numbers and DLL names in contrib/vstudio/*/zlib.rc
-
-Changes in 1.2.7.2 (13 Apr 2013)
-- Change check for a four-byte type back to hexadecimal
-- Fix typo in win32/Makefile.msc
-- Add casts in gzwrite.c for pointer differences
-
-Changes in 1.2.7.1 (24 Mar 2013)
-- Replace use of unsafe string functions with snprintf if available
-- Avoid including stddef.h on Windows for Z_SOLO compile [Niessink]
-- Fix gzgetc undefine when Z_PREFIX set [Turk]
-- Eliminate use of mktemp in Makefile (not always available)
-- Fix bug in 'F' mode for gzopen()
-- Add inflateGetDictionary() function
-- Correct comment in deflate.h
-- Use _snprintf for snprintf in Microsoft C
-- On Darwin, only use /usr/bin/libtool if libtool is not Apple
-- Delete "--version" file if created by "ar --version" [Richard G.]
-- Fix configure check for veracity of compiler error return codes
-- Fix CMake compilation of static lib for MSVC2010 x64
-- Remove unused variable in infback9.c
-- Fix argument checks in gzlog_compress() and gzlog_write()
-- Clean up the usage of z_const and respect const usage within zlib
-- Clean up examples/gzlog.[ch] comparisons of different types
-- Avoid shift equal to bits in type (caused endless loop)
-- Fix uninitialized value bug in gzputc() introduced by const patches
-- Fix memory allocation error in examples/zran.c [Nor]
-- Fix bug where gzopen(), gzclose() would write an empty file
-- Fix bug in gzclose() when gzwrite() runs out of memory
-- Check for input buffer malloc failure in examples/gzappend.c
-- Add note to contrib/blast to use binary mode in stdio
-- Fix comparisons of differently signed integers in contrib/blast
-- Check for invalid code length codes in contrib/puff
-- Fix serious but very rare decompression bug in inftrees.c
-- Update inflateBack() comments, since inflate() can be faster
-- Use underscored I/O function names for WINAPI_FAMILY
-- Add _tr_flush_bits to the external symbols prefixed by --zprefix
-- Add contrib/vstudio/vc10 pre-build step for static only
-- Quote --version-script argument in CMakeLists.txt
-- Don't specify --version-script on Apple platforms in CMakeLists.txt
-- Fix casting error in contrib/testzlib/testzlib.c
-- Fix types in contrib/minizip to match result of get_crc_table()
-- Simplify contrib/vstudio/vc10 with 'd' suffix
-- Add TOP support to win32/Makefile.msc
-- Suport i686 and amd64 assembler builds in CMakeLists.txt
-- Fix typos in the use of _LARGEFILE64_SOURCE in zconf.h
-- Add vc11 and vc12 build files to contrib/vstudio
-- Add gzvprintf() as an undocumented function in zlib
-- Fix configure for Sun shell
-- Remove runtime check in configure for four-byte integer type
-- Add casts and consts to ease user conversion to C++
-- Add man pages for minizip and miniunzip
-- In Makefile uninstall, don't rm if preceding cd fails
-- Do not return Z_BUF_ERROR if deflateParam() has nothing to write
-
-Changes in 1.2.7 (2 May 2012)
-- Replace use of memmove() with a simple copy for portability
-- Test for existence of strerror
-- Restore gzgetc_ for backward compatibility with 1.2.6
-- Fix build with non-GNU make on Solaris
-- Require gcc 4.0 or later on Mac OS X to use the hidden attribute
-- Include unistd.h for Watcom C
-- Use __WATCOMC__ instead of __WATCOM__
-- Do not use the visibility attribute if NO_VIZ defined
-- Improve the detection of no hidden visibility attribute
-- Avoid using __int64 for gcc or solo compilation
-- Cast to char * in gzprintf to avoid warnings [Zinser]
-- Fix make_vms.com for VAX [Zinser]
-- Don't use library or built-in byte swaps
-- Simplify test and use of gcc hidden attribute
-- Fix bug in gzclose_w() when gzwrite() fails to allocate memory
-- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen()
-- Fix bug in test/minigzip.c for configure --solo
-- Fix contrib/vstudio project link errors [Mohanathas]
-- Add ability to choose the builder in make_vms.com [Schweda]
-- Add DESTDIR support to mingw32 win32/Makefile.gcc
-- Fix comments in win32/Makefile.gcc for proper usage
-- Allow overriding the default install locations for cmake
-- Generate and install the pkg-config file with cmake
-- Build both a static and a shared version of zlib with cmake
-- Include version symbols for cmake builds
-- If using cmake with MSVC, add the source directory to the includes
-- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta]
-- Move obsolete emx makefile to old [Truta]
-- Allow the use of -Wundef when compiling or using zlib
-- Avoid the use of the -u option with mktemp
-- Improve inflate() documentation on the use of Z_FINISH
-- Recognize clang as gcc
-- Add gzopen_w() in Windows for wide character path names
-- Rename zconf.h in CMakeLists.txt to move it out of the way
-- Add source directory in CMakeLists.txt for building examples
-- Look in build directory for zlib.pc in CMakeLists.txt
-- Remove gzflags from zlibvc.def in vc9 and vc10
-- Fix contrib/minizip compilation in the MinGW environment
-- Update ./configure for Solaris, support --64 [Mooney]
-- Remove -R. from Solaris shared build (possible security issue)
-- Avoid race condition for parallel make (-j) running example
-- Fix type mismatch between get_crc_table() and crc_table
-- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler]
-- Fix the path to zlib.map in CMakeLists.txt
-- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe]
-- Add instructions to win32/Makefile.gcc for shared install [Torri]
-
-Changes in 1.2.6.1 (12 Feb 2012)
-- Avoid the use of the Objective-C reserved name "id"
-- Include io.h in gzguts.h for Microsoft compilers
-- Fix problem with ./configure --prefix and gzgetc macro
-- Include gz_header definition when compiling zlib solo
-- Put gzflags() functionality back in zutil.c
-- Avoid library header include in crc32.c for Z_SOLO
-- Use name in GCC_CLASSIC as C compiler for coverage testing, if set
-- Minor cleanup in contrib/minizip/zip.c [Vollant]
-- Update make_vms.com [Zinser]
-- Remove unnecessary gzgetc_ function
-- Use optimized byte swap operations for Microsoft and GNU [Snyder]
-- Fix minor typo in zlib.h comments [Rzesniowiecki]
-
-Changes in 1.2.6 (29 Jan 2012)
-- Update the Pascal interface in contrib/pascal
-- Fix function numbers for gzgetc_ in zlibvc.def files
-- Fix configure.ac for contrib/minizip [Schiffer]
-- Fix large-entry detection in minizip on 64-bit systems [Schiffer]
-- Have ./configure use the compiler return code for error indication
-- Fix CMakeLists.txt for cross compilation [McClure]
-- Fix contrib/minizip/zip.c for 64-bit architectures [Dalsnes]
-- Fix compilation of contrib/minizip on FreeBSD [Marquez]
-- Correct suggested usages in win32/Makefile.msc [Shachar, Horvath]
-- Include io.h for Turbo C / Borland C on all platforms [Truta]
-- Make version explicit in contrib/minizip/configure.ac [Bosmans]
-- Avoid warning for no encryption in contrib/minizip/zip.c [Vollant]
-- Minor cleanup up contrib/minizip/unzip.c [Vollant]
-- Fix bug when compiling minizip with C++ [Vollant]
-- Protect for long name and extra fields in contrib/minizip [Vollant]
-- Avoid some warnings in contrib/minizip [Vollant]
-- Add -I../.. -L../.. to CFLAGS for minizip and miniunzip
-- Add missing libs to minizip linker command
-- Add support for VPATH builds in contrib/minizip
-- Add an --enable-demos option to contrib/minizip/configure
-- Add the generation of configure.log by ./configure
-- Exit when required parameters not provided to win32/Makefile.gcc
-- Have gzputc return the character written instead of the argument
-- Use the -m option on ldconfig for BSD systems [Tobias]
-- Correct in zlib.map when deflateResetKeep was added
-
-Changes in 1.2.5.3 (15 Jan 2012)
-- Restore gzgetc function for binary compatibility
-- Do not use _lseeki64 under Borland C++ [Truta]
-- Update win32/Makefile.msc to build test/*.c [Truta]
-- Remove old/visualc6 given CMakefile and other alternatives
-- Update AS400 build files and documentation [Monnerat]
-- Update win32/Makefile.gcc to build test/*.c [Truta]
-- Permit stronger flushes after Z_BLOCK flushes
-- Avoid extraneous empty blocks when doing empty flushes
-- Permit Z_NULL arguments to deflatePending
-- Allow deflatePrime() to insert bits in the middle of a stream
-- Remove second empty static block for Z_PARTIAL_FLUSH
-- Write out all of the available bits when using Z_BLOCK
-- Insert the first two strings in the hash table after a flush
-
-Changes in 1.2.5.2 (17 Dec 2011)
-- fix ld error: unable to find version dependency 'ZLIB_1.2.5'
-- use relative symlinks for shared libs
-- Avoid searching past window for Z_RLE strategy
-- Assure that high-water mark initialization is always applied in deflate
-- Add assertions to fill_window() in deflate.c to match comments
-- Update python link in README
-- Correct spelling error in gzread.c
-- Fix bug in gzgets() for a concatenated empty gzip stream
-- Correct error in comment for gz_make()
-- Change gzread() and related to ignore junk after gzip streams
-- Allow gzread() and related to continue after gzclearerr()
-- Allow gzrewind() and gzseek() after a premature end-of-file
-- Simplify gzseek() now that raw after gzip is ignored
-- Change gzgetc() to a macro for speed (~40% speedup in testing)
-- Fix gzclose() to return the actual error last encountered
-- Always add large file support for windows
-- Include zconf.h for windows large file support
-- Include zconf.h.cmakein for windows large file support
-- Update zconf.h.cmakein on make distclean
-- Merge vestigial vsnprintf determination from zutil.h to gzguts.h
-- Clarify how gzopen() appends in zlib.h comments
-- Correct documentation of gzdirect() since junk at end now ignored
-- Add a transparent write mode to gzopen() when 'T' is in the mode
-- Update python link in zlib man page
-- Get inffixed.h and MAKEFIXED result to match
-- Add a ./config --solo option to make zlib subset with no library use
-- Add undocumented inflateResetKeep() function for CAB file decoding
-- Add --cover option to ./configure for gcc coverage testing
-- Add #define ZLIB_CONST option to use const in the z_stream interface
-- Add comment to gzdopen() in zlib.h to use dup() when using fileno()
-- Note behavior of uncompress() to provide as much data as it can
-- Add files in contrib/minizip to aid in building libminizip
-- Split off AR options in Makefile.in and configure
-- Change ON macro to Z_ARG to avoid application conflicts
-- Facilitate compilation with Borland C++ for pragmas and vsnprintf
-- Include io.h for Turbo C / Borland C++
-- Move example.c and minigzip.c to test/
-- Simplify incomplete code table filling in inflate_table()
-- Remove code from inflate.c and infback.c that is impossible to execute
-- Test the inflate code with full coverage
-- Allow deflateSetDictionary, inflateSetDictionary at any time (in raw)
-- Add deflateResetKeep and fix inflateResetKeep to retain dictionary
-- Fix gzwrite.c to accommodate reduced memory zlib compilation
-- Have inflate() with Z_FINISH avoid the allocation of a window
-- Do not set strm->adler when doing raw inflate
-- Fix gzeof() to behave just like feof() when read is not past end of file
-- Fix bug in gzread.c when end-of-file is reached
-- Avoid use of Z_BUF_ERROR in gz* functions except for premature EOF
-- Document gzread() capability to read concurrently written files
-- Remove hard-coding of resource compiler in CMakeLists.txt [Blammo]
-
-Changes in 1.2.5.1 (10 Sep 2011)
-- Update FAQ entry on shared builds (#13)
-- Avoid symbolic argument to chmod in Makefile.in
-- Fix bug and add consts in contrib/puff [Oberhumer]
-- Update contrib/puff/zeros.raw test file to have all block types
-- Add full coverage test for puff in contrib/puff/Makefile
-- Fix static-only-build install in Makefile.in
-- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno]
-- Add libz.a dependency to shared in Makefile.in for parallel builds
-- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out
-- Replace $(...) with `...` in configure for non-bash sh [Bowler]
-- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen]
-- Add solaris* to Linux* in configure to allow gcc use [Groffen]
-- Add *bsd* to Linux* case in configure [Bar-Lev]
-- Add inffast.obj to dependencies in win32/Makefile.msc
-- Correct spelling error in deflate.h [Kohler]
-- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc
-- Add test to configure for GNU C looking for gcc in output of $cc -v
-- Add zlib.pc generation to win32/Makefile.gcc [Weigelt]
-- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not
-- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense
-- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser)
-- Make stronger test in zconf.h to include unistd.h for LFS
-- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack]
-- Fix zlib.h LFS support when Z_PREFIX used
-- Add updated as400 support (removed from old) [Monnerat]
-- Avoid deflate sensitivity to volatile input data
-- Avoid division in adler32_combine for NO_DIVIDE
-- Clarify the use of Z_FINISH with deflateBound() amount of space
-- Set binary for output file in puff.c
-- Use u4 type for crc_table to avoid conversion warnings
-- Apply casts in zlib.h to avoid conversion warnings
-- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller]
-- Improve inflateSync() documentation to note indeterminancy
-- Add deflatePending() function to return the amount of pending output
-- Correct the spelling of "specification" in FAQ [Randers-Pehrson]
-- Add a check in configure for stdarg.h, use for gzprintf()
-- Check that pointers fit in ints when gzprint() compiled old style
-- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler]
-- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt]
-- Add debug records in assmebler code [Londer]
-- Update RFC references to use http://tools.ietf.org/html/... [Li]
-- Add --archs option, use of libtool to configure for Mac OS X [Borstel]
-
-Changes in 1.2.5 (19 Apr 2010)
-- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
-- Default to libdir as sharedlibdir in configure [Nieder]
-- Update copyright dates on modified source files
-- Update trees.c to be able to generate modified trees.h
-- Exit configure for MinGW, suggesting win32/Makefile.gcc
-- Check for NULL path in gz_open [Homurlu]
-
-Changes in 1.2.4.5 (18 Apr 2010)
-- Set sharedlibdir in configure [Torok]
-- Set LDFLAGS in Makefile.in [Bar-Lev]
-- Avoid mkdir objs race condition in Makefile.in [Bowler]
-- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
-- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
-- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
-
-Changes in 1.2.4.4 (18 Apr 2010)
-- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
-- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
-- Try to use bash or ksh regardless of functionality of /bin/sh
-- Fix configure incompatibility with NetBSD sh
-- Remove attempt to run under bash or ksh since have better NetBSD fix
-- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
-- Add diagnostic messages when using CROSS_PREFIX in configure
-- Added --sharedlibdir option to configure [Weigelt]
-- Use hidden visibility attribute when available [Frysinger]
-
-Changes in 1.2.4.3 (10 Apr 2010)
-- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
-- Use CROSS_PREFIX for nm [Bar-Lev]
-- Assume _LARGEFILE64_SOURCE defined is equivalent to true
-- Avoid use of undefined symbols in #if with && and ||
-- Make *64 prototypes in gzguts.h consistent with functions
-- Add -shared load option for MinGW in configure [Bowler]
-- Move z_off64_t to public interface, use instead of off64_t
-- Remove ! from shell test in configure (not portable to Solaris)
-- Change +0 macro tests to -0 for possibly increased portability
-
-Changes in 1.2.4.2 (9 Apr 2010)
-- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
-- Really provide prototypes for *64 functions when building without LFS
-- Only define unlink() in minigzip.c if unistd.h not included
-- Update README to point to contrib/vstudio project files
-- Move projects/vc6 to old/ and remove projects/
-- Include stdlib.h in minigzip.c for setmode() definition under WinCE
-- Clean up assembler builds in win32/Makefile.msc [Rowe]
-- Include sys/types.h for Microsoft for off_t definition
-- Fix memory leak on error in gz_open()
-- Symbolize nm as $NM in configure [Weigelt]
-- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt]
-- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined
-- Fix bug in gzeof() to take into account unused input data
-- Avoid initialization of structures with variables in puff.c
-- Updated win32/README-WIN32.txt [Rowe]
-
-Changes in 1.2.4.1 (28 Mar 2010)
-- Remove the use of [a-z] constructs for sed in configure [gentoo 310225]
-- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech]
-- Restore "for debugging" comment on sprintf() in gzlib.c
-- Remove fdopen for MVS from gzguts.h
-- Put new README-WIN32.txt in win32 [Rowe]
-- Add check for shell to configure and invoke another shell if needed
-- Fix big fat stinking bug in gzseek() on uncompressed files
-- Remove vestigial F_OPEN64 define in zutil.h
-- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE
-- Avoid errors on non-LFS systems when applications define LFS macros
-- Set EXE to ".exe" in configure for MINGW [Kahle]
-- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill]
-- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev]
-- Add DLL install in win32/makefile.gcc [Bar-Lev]
-- Allow Linux* or linux* from uname in configure [Bar-Lev]
-- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev]
-- Add cross-compilation prefixes to configure [Bar-Lev]
-- Match type exactly in gz_load() invocation in gzread.c
-- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func
-- Provide prototypes for *64 functions when building zlib without LFS
-- Don't use -lc when linking shared library on MinGW
-- Remove errno.h check in configure and vestigial errno code in zutil.h
-
-Changes in 1.2.4 (14 Mar 2010)
-- Fix VER3 extraction in configure for no fourth subversion
-- Update zlib.3, add docs to Makefile.in to make .pdf out of it
-- Add zlib.3.pdf to distribution
-- Don't set error code in gzerror() if passed pointer is NULL
-- Apply destination directory fixes to CMakeLists.txt [Lowman]
-- Move #cmakedefine's to a new zconf.in.cmakein
-- Restore zconf.h for builds that don't use configure or cmake
-- Add distclean to dummy Makefile for convenience
-- Update and improve INDEX, README, and FAQ
-- Update CMakeLists.txt for the return of zconf.h [Lowman]
-- Update contrib/vstudio/vc9 and vc10 [Vollant]
-- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc
-- Apply license and readme changes to contrib/asm686 [Raiter]
-- Check file name lengths and add -c option in minigzip.c [Li]
-- Update contrib/amd64 and contrib/masmx86/ [Vollant]
-- Avoid use of "eof" parameter in trees.c to not shadow library variable
-- Update make_vms.com for removal of zlibdefs.h [Zinser]
-- Update assembler code and vstudio projects in contrib [Vollant]
-- Remove outdated assembler code contrib/masm686 and contrib/asm586
-- Remove old vc7 and vc8 from contrib/vstudio
-- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe]
-- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open()
-- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant]
-- Remove *64 functions from win32/zlib.def (they're not 64-bit yet)
-- Fix bug in void-returning vsprintf() case in gzwrite.c
-- Fix name change from inflate.h in contrib/inflate86/inffas86.c
-- Check if temporary file exists before removing in make_vms.com [Zinser]
-- Fix make install and uninstall for --static option
-- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta]
-- Update readme.txt in contrib/masmx64 and masmx86 to assemble
-
-Changes in 1.2.3.9 (21 Feb 2010)
-- Expunge gzio.c
-- Move as400 build information to old
-- Fix updates in contrib/minizip and contrib/vstudio
-- Add const to vsnprintf test in configure to avoid warnings [Weigelt]
-- Delete zconf.h (made by configure) [Weigelt]
-- Change zconf.in.h to zconf.h.in per convention [Weigelt]
-- Check for NULL buf in gzgets()
-- Return empty string for gzgets() with len == 1 (like fgets())
-- Fix description of gzgets() in zlib.h for end-of-file, NULL return
-- Update minizip to 1.1 [Vollant]
-- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c
-- Note in zlib.h that gzerror() should be used to distinguish from EOF
-- Remove use of snprintf() from gzlib.c
-- Fix bug in gzseek()
-- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant]
-- Fix zconf.h generation in CMakeLists.txt [Lowman]
-- Improve comments in zconf.h where modified by configure
-
-Changes in 1.2.3.8 (13 Feb 2010)
-- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer]
-- Use z_off64_t in gz_zero() and gz_skip() to match state->skip
-- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t)
-- Revert to Makefile.in from 1.2.3.6 (live with the clutter)
-- Fix missing error return in gzflush(), add zlib.h note
-- Add *64 functions to zlib.map [Levin]
-- Fix signed/unsigned comparison in gz_comp()
-- Use SFLAGS when testing shared linking in configure
-- Add --64 option to ./configure to use -m64 with gcc
-- Fix ./configure --help to correctly name options
-- Have make fail if a test fails [Levin]
-- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson]
-- Remove assembler object files from contrib
-
-Changes in 1.2.3.7 (24 Jan 2010)
-- Always gzopen() with O_LARGEFILE if available
-- Fix gzdirect() to work immediately after gzopen() or gzdopen()
-- Make gzdirect() more precise when the state changes while reading
-- Improve zlib.h documentation in many places
-- Catch memory allocation failure in gz_open()
-- Complete close operation if seek forward in gzclose_w() fails
-- Return Z_ERRNO from gzclose_r() if close() fails
-- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL
-- Return zero for gzwrite() errors to match zlib.h description
-- Return -1 on gzputs() error to match zlib.h description
-- Add zconf.in.h to allow recovery from configure modification [Weigelt]
-- Fix static library permissions in Makefile.in [Weigelt]
-- Avoid warnings in configure tests that hide functionality [Weigelt]
-- Add *BSD and DragonFly to Linux case in configure [gentoo 123571]
-- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212]
-- Avoid access of uninitialized data for first inflateReset2 call [Gomes]
-- Keep object files in subdirectories to reduce the clutter somewhat
-- Remove default Makefile and zlibdefs.h, add dummy Makefile
-- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_
-- Remove zlibdefs.h completely -- modify zconf.h instead
-
-Changes in 1.2.3.6 (17 Jan 2010)
-- Avoid void * arithmetic in gzread.c and gzwrite.c
-- Make compilers happier with const char * for gz_error message
-- Avoid unused parameter warning in inflate.c
-- Avoid signed-unsigned comparison warning in inflate.c
-- Indent #pragma's for traditional C
-- Fix usage of strwinerror() in glib.c, change to gz_strwinerror()
-- Correct email address in configure for system options
-- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
-- Update zlib.map [Brown]
-- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
-- Apply various fixes to CMakeLists.txt [Lowman]
-- Add checks on len in gzread() and gzwrite()
-- Add error message for no more room for gzungetc()
-- Remove zlib version check in gzwrite()
-- Defer compression of gzprintf() result until need to
-- Use snprintf() in gzdopen() if available
-- Remove USE_MMAP configuration determination (only used by minigzip)
-- Remove examples/pigz.c (available separately)
-- Update examples/gun.c to 1.6
-
-Changes in 1.2.3.5 (8 Jan 2010)
-- Add space after #if in zutil.h for some compilers
-- Fix relatively harmless bug in deflate_fast() [Exarevsky]
-- Fix same problem in deflate_slow()
-- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown]
-- Add deflate_rle() for faster Z_RLE strategy run-length encoding
-- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding
-- Change name of "write" variable in inffast.c to avoid library collisions
-- Fix premature EOF from gzread() in gzio.c [Brown]
-- Use zlib header window size if windowBits is 0 in inflateInit2()
-- Remove compressBound() call in deflate.c to avoid linking compress.o
-- Replace use of errno in gz* with functions, support WinCE [Alves]
-- Provide alternative to perror() in minigzip.c for WinCE [Alves]
-- Don't use _vsnprintf on later versions of MSVC [Lowman]
-- Add CMake build script and input file [Lowman]
-- Update contrib/minizip to 1.1 [Svensson, Vollant]
-- Moved nintendods directory from contrib to .
-- Replace gzio.c with a new set of routines with the same functionality
-- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
-- Update contrib/minizip to 1.1b
-- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h
-
-Changes in 1.2.3.4 (21 Dec 2009)
-- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility
-- Update comments in configure and Makefile.in for default --shared
-- Fix test -z's in configure [Marquess]
-- Build examplesh and minigzipsh when not testing
-- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h
-- Import LDFLAGS from the environment in configure
-- Fix configure to populate SFLAGS with discovered CFLAGS options
-- Adapt make_vms.com to the new Makefile.in [Zinser]
-- Add zlib2ansi script for C++ compilation [Marquess]
-- Add _FILE_OFFSET_BITS=64 test to make test (when applicable)
-- Add AMD64 assembler code for longest match to contrib [Teterin]
-- Include options from $SFLAGS when doing $LDSHARED
-- Simplify 64-bit file support by introducing z_off64_t type
-- Make shared object files in objs directory to work around old Sun cc
-- Use only three-part version number for Darwin shared compiles
-- Add rc option to ar in Makefile.in for when ./configure not run
-- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4*
-- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile
-- Protect against _FILE_OFFSET_BITS being defined when compiling zlib
-- Rename Makefile.in targets allstatic to static and allshared to shared
-- Fix static and shared Makefile.in targets to be independent
-- Correct error return bug in gz_open() by setting state [Brown]
-- Put spaces before ;;'s in configure for better sh compatibility
-- Add pigz.c (parallel implementation of gzip) to examples/
-- Correct constant in crc32.c to UL [Leventhal]
-- Reject negative lengths in crc32_combine()
-- Add inflateReset2() function to work like inflateEnd()/inflateInit2()
-- Include sys/types.h for _LARGEFILE64_SOURCE [Brown]
-- Correct typo in doc/algorithm.txt [Janik]
-- Fix bug in adler32_combine() [Zhu]
-- Catch missing-end-of-block-code error in all inflates and in puff
-    Assures that random input to inflate eventually results in an error
-- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/
-- Update ENOUGH and its usage to reflect discovered bounds
-- Fix gzerror() error report on empty input file [Brown]
-- Add ush casts in trees.c to avoid pedantic runtime errors
-- Fix typo in zlib.h uncompress() description [Reiss]
-- Correct inflate() comments with regard to automatic header detection
-- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays)
-- Put new version of gzlog (2.0) in examples with interruption recovery
-- Add puff compile option to permit invalid distance-too-far streams
-- Add puff TEST command options, ability to read piped input
-- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but
-  _LARGEFILE64_SOURCE not defined
-- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart
-- Fix deflateSetDictionary() to use all 32K for output consistency
-- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h)
-- Clear bytes after deflate lookahead to avoid use of uninitialized data
-- Change a limit in inftrees.c to be more transparent to Coverity Prevent
-- Update win32/zlib.def with exported symbols from zlib.h
-- Correct spelling errors in zlib.h [Willem, Sobrado]
-- Allow Z_BLOCK for deflate() to force a new block
-- Allow negative bits in inflatePrime() to delete existing bit buffer
-- Add Z_TREES flush option to inflate() to return at end of trees
-- Add inflateMark() to return current state information for random access
-- Add Makefile for NintendoDS to contrib [Costa]
-- Add -w in configure compile tests to avoid spurious warnings [Beucler]
-- Fix typos in zlib.h comments for deflateSetDictionary()
-- Fix EOF detection in transparent gzread() [Maier]
-
-Changes in 1.2.3.3 (2 October 2006)
-- Make --shared the default for configure, add a --static option
-- Add compile option to permit invalid distance-too-far streams
-- Add inflateUndermine() function which is required to enable above
-- Remove use of "this" variable name for C++ compatibility [Marquess]
-- Add testing of shared library in make test, if shared library built
-- Use ftello() and fseeko() if available instead of ftell() and fseek()
-- Provide two versions of all functions that use the z_off_t type for
-  binary compatibility -- a normal version and a 64-bit offset version,
-  per the Large File Support Extension when _LARGEFILE64_SOURCE is
-  defined; use the 64-bit versions by default when _FILE_OFFSET_BITS
-  is defined to be 64
-- Add a --uname= option to configure to perhaps help with cross-compiling
-
-Changes in 1.2.3.2 (3 September 2006)
-- Turn off silly Borland warnings [Hay]
-- Use off64_t and define _LARGEFILE64_SOURCE when present
-- Fix missing dependency on inffixed.h in Makefile.in
-- Rig configure --shared to build both shared and static [Teredesai, Truta]
-- Remove zconf.in.h and instead create a new zlibdefs.h file
-- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant]
-- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt]
-
-Changes in 1.2.3.1 (16 August 2006)
-- Add watcom directory with OpenWatcom make files [Daniel]
-- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
-- Update make_vms.com [Zinser]
-- Use -fPIC for shared build in configure [Teredesai, Nicholson]
-- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
-- Use fdopen() (not _fdopen()) for Interix in zutil.h [Bäck]
-- Add some FAQ entries about the contrib directory
-- Update the MVS question in the FAQ
-- Avoid extraneous reads after EOF in gzio.c [Brown]
-- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
-- Add comments to zlib.h about gzerror() usage [Brown]
-- Set extra flags in gzip header in gzopen() like deflate() does
-- Make configure options more compatible with double-dash conventions
-  [Weigelt]
-- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
-- Fix uninstall target in Makefile.in [Truta]
-- Add pkgconfig support [Weigelt]
-- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
-- Replace set_data_type() with a more accurate detect_data_type() in
-  trees.c, according to the txtvsbin.txt document [Truta]
-- Swap the order of #include <stdio.h> and #include "zlib.h" in
-  gzio.c, example.c and minigzip.c [Truta]
-- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
-  Truta] (where?)
-- Fix target "clean" from win32/Makefile.bor [Truta]
-- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
-- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
-- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
-- Enable browse info in the "Debug" and "ASM Debug" configurations in
-  the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
-- Add pkgconfig support [Weigelt]
-- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
-  for use in win32/zlib1.rc [Polushin, Rowe, Truta]
-- Add a document that explains the new text detection scheme to
-  doc/txtvsbin.txt [Truta]
-- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
-- Move algorithm.txt into doc/ [Truta]
-- Synchronize FAQ with website
-- Fix compressBound(), was low for some pathological cases [Fearnley]
-- Take into account wrapper variations in deflateBound()
-- Set examples/zpipe.c input and output to binary mode for Windows
-- Update examples/zlib_how.html with new zpipe.c (also web site)
-- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
-  that gcc became pickier in 4.0)
-- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
-  un-versioned, the patch adds versioning only for symbols introduced in
-  zlib-1.2.0 or later.  It also declares as local those symbols which are
-  not designed to be exported." [Levin]
-- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
-- Do not initialize global static by default in trees.c, add a response
-  NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
-- Don't use strerror() in gzio.c under WinCE [Yakimov]
-- Don't use errno.h in zutil.h under WinCE [Yakimov]
-- Move arguments for AR to its usage to allow replacing ar [Marot]
-- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
-- Improve inflateInit() and inflateInit2() documentation
-- Fix structure size comment in inflate.h
-- Change configure help option from --h* to --help [Santos]
-
-Changes in 1.2.3 (18 July 2005)
-- Apply security vulnerability fixes to contrib/infback9 as well
-- Clean up some text files (carriage returns, trailing space)
-- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
-
-Changes in 1.2.2.4 (11 July 2005)
-- Add inflatePrime() function for starting inflation at bit boundary
-- Avoid some Visual C warnings in deflate.c
-- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
-  compile
-- Fix some spelling errors in comments [Betts]
-- Correct inflateInit2() error return documentation in zlib.h
-- Add zran.c example of compressed data random access to examples
-  directory, shows use of inflatePrime()
-- Fix cast for assignments to strm->state in inflate.c and infback.c
-- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
-- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
-- Add cast in trees.c t avoid a warning [Oberhumer]
-- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
-- Update make_vms.com [Zinser]
-- Initialize state->write in inflateReset() since copied in inflate_fast()
-- Be more strict on incomplete code sets in inflate_table() and increase
-  ENOUGH and MAXD -- this repairs a possible security vulnerability for
-  invalid inflate input.  Thanks to Tavis Ormandy and Markus Oberhumer for
-  discovering the vulnerability and providing test cases.
-- Add ia64 support to configure for HP-UX [Smith]
-- Add error return to gzread() for format or i/o error [Levin]
-- Use malloc.h for OS/2 [Necasek]
-
-Changes in 1.2.2.3 (27 May 2005)
-- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
-- Typecast fread() return values in gzio.c [Vollant]
-- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
-- Fix crc check bug in gzread() after gzungetc() [Heiner]
-- Add the deflateTune() function to adjust internal compression parameters
-- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
-- Remove an incorrect assertion in examples/zpipe.c
-- Add C++ wrapper in infback9.h [Donais]
-- Fix bug in inflateCopy() when decoding fixed codes
-- Note in zlib.h how much deflateSetDictionary() actually uses
-- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
-- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
-- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
-- Add gzdirect() function to indicate transparent reads
-- Update contrib/minizip [Vollant]
-- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
-- Add casts in crc32.c to avoid warnings [Oberhumer]
-- Add contrib/masmx64 [Vollant]
-- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
-
-Changes in 1.2.2.2 (30 December 2004)
-- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
-  avoid implicit memcpy calls (portability for no-library compilation)
-- Increase sprintf() buffer size in gzdopen() to allow for large numbers
-- Add INFLATE_STRICT to check distances against zlib header
-- Improve WinCE errno handling and comments [Chang]
-- Remove comment about no gzip header processing in FAQ
-- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
-- Add updated make_vms.com [Coghlan], update README
-- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
-  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
-- Add FAQ entry and comments in deflate.c on uninitialized memory access
-- Add Solaris 9 make options in configure [Gilbert]
-- Allow strerror() usage in gzio.c for STDC
-- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
-- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
-- Use z_off_t for adler32_combine() and crc32_combine() lengths
-- Make adler32() much faster for small len
-- Use OS_CODE in deflate() default gzip header
-
-Changes in 1.2.2.1 (31 October 2004)
-- Allow inflateSetDictionary() call for raw inflate
-- Fix inflate header crc check bug for file names and comments
-- Add deflateSetHeader() and gz_header structure for custom gzip headers
-- Add inflateGetheader() to retrieve gzip headers
-- Add crc32_combine() and adler32_combine() functions
-- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
-- Use zstreamp consistently in zlib.h (inflate_back functions)
-- Remove GUNZIP condition from definition of inflate_mode in inflate.h
-  and in contrib/inflate86/inffast.S [Truta, Anderson]
-- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
-- Update projects/README.projects and projects/visualc6 [Truta]
-- Update win32/DLL_FAQ.txt [Truta]
-- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
-- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
-- Use a new algorithm for setting strm->data_type in trees.c [Truta]
-- Do not define an exit() prototype in zutil.c unless DEBUG defined
-- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
-- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
-- Fix Darwin build version identification [Peterson]
-
-Changes in 1.2.2 (3 October 2004)
-- Update zlib.h comments on gzip in-memory processing
-- Set adler to 1 in inflateReset() to support Java test suite [Walles]
-- Add contrib/dotzlib [Ravn]
-- Update win32/DLL_FAQ.txt [Truta]
-- Update contrib/minizip [Vollant]
-- Move contrib/visual-basic.txt to old/ [Truta]
-- Fix assembler builds in projects/visualc6/ [Truta]
-
-Changes in 1.2.1.2 (9 September 2004)
-- Update INDEX file
-- Fix trees.c to update strm->data_type (no one ever noticed!)
-- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
-- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
-- Add limited multitasking protection to DYNAMIC_CRC_TABLE
-- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
-- Don't declare strerror() under VMS [Mozilla]
-- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
-- Update contrib/ada [Anisimkov]
-- Update contrib/minizip [Vollant]
-- Fix configure to not hardcode directories for Darwin [Peterson]
-- Fix gzio.c to not return error on empty files [Brown]
-- Fix indentation; update version in contrib/delphi/ZLib.pas and
-  contrib/pascal/zlibpas.pas [Truta]
-- Update mkasm.bat in contrib/masmx86 [Truta]
-- Update contrib/untgz [Truta]
-- Add projects/README.projects [Truta]
-- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
-- Update win32/DLL_FAQ.txt [Truta]
-- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
-- Remove an unnecessary assignment to curr in inftrees.c [Truta]
-- Add OS/2 to exe builds in configure [Poltorak]
-- Remove err dummy parameter in zlib.h [Kientzle]
-
-Changes in 1.2.1.1 (9 January 2004)
-- Update email address in README
-- Several FAQ updates
-- Fix a big fat bug in inftrees.c that prevented decoding valid
-  dynamic blocks with only literals and no distance codes --
-  Thanks to "Hot Emu" for the bug report and sample file
-- Add a note to puff.c on no distance codes case.
-
-Changes in 1.2.1 (17 November 2003)
-- Remove a tab in contrib/gzappend/gzappend.c
-- Update some interfaces in contrib for new zlib functions
-- Update zlib version number in some contrib entries
-- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta]
-- Support shared libraries on Hurd and KFreeBSD [Brown]
-- Fix error in NO_DIVIDE option of adler32.c
-
-Changes in 1.2.0.8 (4 November 2003)
-- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas
-- Add experimental NO_DIVIDE #define in adler32.c
-    - Possibly faster on some processors (let me know if it is)
-- Correct Z_BLOCK to not return on first inflate call if no wrap
-- Fix strm->data_type on inflate() return to correctly indicate EOB
-- Add deflatePrime() function for appending in the middle of a byte
-- Add contrib/gzappend for an example of appending to a stream
-- Update win32/DLL_FAQ.txt [Truta]
-- Delete Turbo C comment in README [Truta]
-- Improve some indentation in zconf.h [Truta]
-- Fix infinite loop on bad input in configure script [Church]
-- Fix gzeof() for concatenated gzip files [Johnson]
-- Add example to contrib/visual-basic.txt [Michael B.]
-- Add -p to mkdir's in Makefile.in [vda]
-- Fix configure to properly detect presence or lack of printf functions
-- Add AS400 support [Monnerat]
-- Add a little Cygwin support [Wilson]
-
-Changes in 1.2.0.7 (21 September 2003)
-- Correct some debug formats in contrib/infback9
-- Cast a type in a debug statement in trees.c
-- Change search and replace delimiter in configure from % to # [Beebe]
-- Update contrib/untgz to 0.2 with various fixes [Truta]
-- Add build support for Amiga [Nikl]
-- Remove some directories in old that have been updated to 1.2
-- Add dylib building for Mac OS X in configure and Makefile.in
-- Remove old distribution stuff from Makefile
-- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X
-- Update links in README
-
-Changes in 1.2.0.6 (13 September 2003)
-- Minor FAQ updates
-- Update contrib/minizip to 1.00 [Vollant]
-- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta]
-- Update POSTINC comment for 68060 [Nikl]
-- Add contrib/infback9 with deflate64 decoding (unsupported)
-- For MVS define NO_vsnprintf and undefine FAR [van Burik]
-- Add pragma for fdopen on MVS [van Burik]
-
-Changes in 1.2.0.5 (8 September 2003)
-- Add OF to inflateBackEnd() declaration in zlib.h
-- Remember start when using gzdopen in the middle of a file
-- Use internal off_t counters in gz* functions to properly handle seeks
-- Perform more rigorous check for distance-too-far in inffast.c
-- Add Z_BLOCK flush option to return from inflate at block boundary
-- Set strm->data_type on return from inflate
-    - Indicate bits unused, if at block boundary, and if in last block
-- Replace size_t with ptrdiff_t in crc32.c, and check for correct size
-- Add condition so old NO_DEFLATE define still works for compatibility
-- FAQ update regarding the Windows DLL [Truta]
-- INDEX update: add qnx entry, remove aix entry [Truta]
-- Install zlib.3 into mandir [Wilson]
-- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta]
-- Adapt the zlib interface to the new DLL convention guidelines [Truta]
-- Introduce ZLIB_WINAPI macro to allow the export of functions using
-  the WINAPI calling convention, for Visual Basic [Vollant, Truta]
-- Update msdos and win32 scripts and makefiles [Truta]
-- Export symbols by name, not by ordinal, in win32/zlib.def [Truta]
-- Add contrib/ada [Anisimkov]
-- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta]
-- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant]
-- Add contrib/masm686 [Truta]
-- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm
-  [Truta, Vollant]
-- Update contrib/delphi; rename to contrib/pascal; add example [Truta]
-- Remove contrib/delphi2; add a new contrib/delphi [Truta]
-- Avoid inclusion of the nonstandard <memory.h> in contrib/iostream,
-  and fix some method prototypes [Truta]
-- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip
-  [Truta]
-- Avoid the use of backslash (\) in contrib/minizip [Vollant]
-- Fix file time handling in contrib/untgz; update makefiles [Truta]
-- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines
-  [Vollant]
-- Remove contrib/vstudio/vc15_16 [Vollant]
-- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta]
-- Update README.contrib [Truta]
-- Invert the assignment order of match_head and s->prev[...] in
-  INSERT_STRING [Truta]
-- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings
-  [Truta]
-- Compare function pointers with 0, not with NULL or Z_NULL [Truta]
-- Fix prototype of syncsearch in inflate.c [Truta]
-- Introduce ASMINF macro to be enabled when using an ASM implementation
-  of inflate_fast [Truta]
-- Change NO_DEFLATE to NO_GZCOMPRESS [Truta]
-- Modify test_gzio in example.c to take a single file name as a
-  parameter [Truta]
-- Exit the example.c program if gzopen fails [Truta]
-- Add type casts around strlen in example.c [Truta]
-- Remove casting to sizeof in minigzip.c; give a proper type
-  to the variable compared with SUFFIX_LEN [Truta]
-- Update definitions of STDC and STDC99 in zconf.h [Truta]
-- Synchronize zconf.h with the new Windows DLL interface [Truta]
-- Use SYS16BIT instead of __32BIT__ to distinguish between
-  16- and 32-bit platforms [Truta]
-- Use far memory allocators in small 16-bit memory models for
-  Turbo C [Truta]
-- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in
-  zlibCompileFlags [Truta]
-- Cygwin has vsnprintf [Wilson]
-- In Windows16, OS_CODE is 0, as in MSDOS [Truta]
-- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson]
-
-Changes in 1.2.0.4 (10 August 2003)
-- Minor FAQ updates
-- Be more strict when checking inflateInit2's windowBits parameter
-- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well
-- Add gzip wrapper option to deflateInit2 using windowBits
-- Add updated QNX rule in configure and qnx directory [Bonnefoy]
-- Make inflate distance-too-far checks more rigorous
-- Clean up FAR usage in inflate
-- Add casting to sizeof() in gzio.c and minigzip.c
-
-Changes in 1.2.0.3 (19 July 2003)
-- Fix silly error in gzungetc() implementation [Vollant]
-- Update contrib/minizip and contrib/vstudio [Vollant]
-- Fix printf format in example.c
-- Correct cdecl support in zconf.in.h [Anisimkov]
-- Minor FAQ updates
-
-Changes in 1.2.0.2 (13 July 2003)
-- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons
-- Attempt to avoid warnings in crc32.c for pointer-int conversion
-- Add AIX to configure, remove aix directory [Bakker]
-- Add some casts to minigzip.c
-- Improve checking after insecure sprintf() or vsprintf() calls
-- Remove #elif's from crc32.c
-- Change leave label to inf_leave in inflate.c and infback.c to avoid
-  library conflicts
-- Remove inflate gzip decoding by default--only enable gzip decoding by
-  special request for stricter backward compatibility
-- Add zlibCompileFlags() function to return compilation information
-- More typecasting in deflate.c to avoid warnings
-- Remove leading underscore from _Capital #defines [Truta]
-- Fix configure to link shared library when testing
-- Add some Windows CE target adjustments [Mai]
-- Remove #define ZLIB_DLL in zconf.h [Vollant]
-- Add zlib.3 [Rodgers]
-- Update RFC URL in deflate.c and algorithm.txt [Mai]
-- Add zlib_dll_FAQ.txt to contrib [Truta]
-- Add UL to some constants [Truta]
-- Update minizip and vstudio [Vollant]
-- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h
-- Expand use of NO_DUMMY_DECL to avoid all dummy structures
-- Added iostream3 to contrib [Schwardt]
-- Replace rewind() with fseek() for WinCE [Truta]
-- Improve setting of zlib format compression level flags
-    - Report 0 for huffman and rle strategies and for level == 0 or 1
-    - Report 2 only for level == 6
-- Only deal with 64K limit when necessary at compile time [Truta]
-- Allow TOO_FAR check to be turned off at compile time [Truta]
-- Add gzclearerr() function [Souza]
-- Add gzungetc() function
-
-Changes in 1.2.0.1 (17 March 2003)
-- Add Z_RLE strategy for run-length encoding [Truta]
-    - When Z_RLE requested, restrict matches to distance one
-    - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE
-- Correct FASTEST compilation to allow level == 0
-- Clean up what gets compiled for FASTEST
-- Incorporate changes to zconf.in.h [Vollant]
-    - Refine detection of Turbo C need for dummy returns
-    - Refine ZLIB_DLL compilation
-    - Include additional header file on VMS for off_t typedef
-- Try to use _vsnprintf where it supplants vsprintf [Vollant]
-- Add some casts in inffast.c
-- Enchance comments in zlib.h on what happens if gzprintf() tries to
-  write more than 4095 bytes before compression
-- Remove unused state from inflateBackEnd()
-- Remove exit(0) from minigzip.c, example.c
-- Get rid of all those darn tabs
-- Add "check" target to Makefile.in that does the same thing as "test"
-- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in
-- Update contrib/inflate86 [Anderson]
-- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant]
-- Add msdos and win32 directories with makefiles [Truta]
-- More additions and improvements to the FAQ
-
-Changes in 1.2.0 (9 March 2003)
-- New and improved inflate code
-    - About 20% faster
-    - Does not allocate 32K window unless and until needed
-    - Automatically detects and decompresses gzip streams
-    - Raw inflate no longer needs an extra dummy byte at end
-    - Added inflateBack functions using a callback interface--even faster
-      than inflate, useful for file utilities (gzip, zip)
-    - Added inflateCopy() function to record state for random access on
-      externally generated deflate streams (e.g. in gzip files)
-    - More readable code (I hope)
-- New and improved crc32()
-    - About 50% faster, thanks to suggestions from Rodney Brown
-- Add deflateBound() and compressBound() functions
-- Fix memory leak in deflateInit2()
-- Permit setting dictionary for raw deflate (for parallel deflate)
-- Fix const declaration for gzwrite()
-- Check for some malloc() failures in gzio.c
-- Fix bug in gzopen() on single-byte file 0x1f
-- Fix bug in gzread() on concatenated file with 0x1f at end of buffer
-  and next buffer doesn't start with 0x8b
-- Fix uncompress() to return Z_DATA_ERROR on truncated input
-- Free memory at end of example.c
-- Remove MAX #define in trees.c (conflicted with some libraries)
-- Fix static const's in deflate.c, gzio.c, and zutil.[ch]
-- Declare malloc() and free() in gzio.c if STDC not defined
-- Use malloc() instead of calloc() in zutil.c if int big enough
-- Define STDC for AIX
-- Add aix/ with approach for compiling shared library on AIX
-- Add HP-UX support for shared libraries in configure
-- Add OpenUNIX support for shared libraries in configure
-- Use $cc instead of gcc to build shared library
-- Make prefix directory if needed when installing
-- Correct Macintosh avoidance of typedef Byte in zconf.h
-- Correct Turbo C memory allocation when under Linux
-- Use libz.a instead of -lz in Makefile (assure use of compiled library)
-- Update configure to check for snprintf or vsnprintf functions and their
-  return value, warn during make if using an insecure function
-- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that
-  is lost when library is used--resolution is to build new zconf.h
-- Documentation improvements (in zlib.h):
-    - Document raw deflate and inflate
-    - Update RFCs URL
-    - Point out that zlib and gzip formats are different
-    - Note that Z_BUF_ERROR is not fatal
-    - Document string limit for gzprintf() and possible buffer overflow
-    - Note requirement on avail_out when flushing
-    - Note permitted values of flush parameter of inflate()
-- Add some FAQs (and even answers) to the FAQ
-- Add contrib/inflate86/ for x86 faster inflate
-- Add contrib/blast/ for PKWare Data Compression Library decompression
-- Add contrib/puff/ simple inflate for deflate format description
-
-Changes in 1.1.4 (11 March 2002)
-- ZFREE was repeated on same allocation on some error conditions.
-  This creates a security problem described in
-  http://www.zlib.org/advisory-2002-03-11.txt
-- Returned incorrect error (Z_MEM_ERROR) on some invalid data
-- Avoid accesses before window for invalid distances with inflate window
-  less than 32K.
-- force windowBits > 8 to avoid a bug in the encoder for a window size
-  of 256 bytes. (A complete fix will be available in 1.1.5).
-
-Changes in 1.1.3 (9 July 1998)
-- fix "an inflate input buffer bug that shows up on rare but persistent
-  occasions" (Mark)
-- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
-- fix gzseek(..., SEEK_SET) in write mode
-- fix crc check after a gzeek (Frank Faubert)
-- fix miniunzip when the last entry in a zip file is itself a zip file
-  (J Lillge)
-- add contrib/asm586 and contrib/asm686 (Brian Raiter)
-  See http://www.muppetlabs.com/~breadbox/software/assembly.html
-- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
-- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
-- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
-- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
-- added a FAQ file
-
-- Support gzdopen on Mac with Metrowerks (Jason Linhart)
-- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
-- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
-- avoid some warnings with Borland C (Tom Tanner)
-- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
-- emulate utime() for WIN32 in contrib/untgz  (Gilles Vollant)
-- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
-- use libdir and includedir in Makefile.in (Tim Mooney)
-- support shared libraries on OSF1 V4 (Tim Mooney)
-- remove so_locations in "make clean"  (Tim Mooney)
-- fix maketree.c compilation error (Glenn, Mark)
-- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
-- new Makefile.riscos (Rich Walker)
-- initialize static descriptors in trees.c for embedded targets (Nick Smith)
-- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
-- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
-- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
-- fix maketree.c to allow clean compilation of inffixed.h (Mark)
-- fix parameter check in deflateCopy (Gunther Nikl)
-- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
-- Many portability patches by Christian Spieler:
-  . zutil.c, zutil.h: added "const" for zmem*
-  . Make_vms.com: fixed some typos
-  . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
-  . msdos/Makefile.msc: remove "default rtl link library" info from obj files
-  . msdos/Makefile.*: use model-dependent name for the built zlib library
-  . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
-     new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
-- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
-- replace __far with _far for better portability (Christian Spieler, Tom Lane)
-- fix test for errno.h in configure (Tim Newsham)
-
-Changes in 1.1.2 (19 March 98)
-- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
-  See http://www.winimage.com/zLibDll/unzip.html
-- preinitialize the inflate tables for fixed codes, to make the code
-  completely thread safe (Mark)
-- some simplifications and slight speed-up to the inflate code (Mark)
-- fix gzeof on non-compressed files (Allan Schrum)
-- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
-- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
-- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
-- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
-- do not wrap extern "C" around system includes (Tom Lane)
-- mention zlib binding for TCL in README (Andreas Kupries)
-- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
-- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
-- allow "configure --prefix $HOME" (Tim Mooney)
-- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
-- move Makefile.sas to amiga/Makefile.sas
-
-Changes in 1.1.1 (27 Feb 98)
-- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
-- remove block truncation heuristic which had very marginal effect for zlib
-  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
-  compression ratio on some files. This also allows inlining _tr_tally for
-  matches in deflate_slow.
-- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
-
-Changes in 1.1.0 (24 Feb 98)
-- do not return STREAM_END prematurely in inflate (John Bowler)
-- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
-- compile with -DFASTEST to get compression code optimized for speed only
-- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
-- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
-  on Sun but significant on HP)
-
-- add a pointer to experimental unzip library in README (Gilles Vollant)
-- initialize variable gcc in configure (Chris Herborth)
-
-Changes in 1.0.9 (17 Feb 1998)
-- added gzputs and gzgets functions
-- do not clear eof flag in gzseek (Mark Diekhans)
-- fix gzseek for files in transparent mode (Mark Diekhans)
-- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
-- replace EXPORT with ZEXPORT to avoid conflict with other programs
-- added compress2 in zconf.h, zlib.def, zlib.dnt
-- new asm code from Gilles Vollant in contrib/asm386
-- simplify the inflate code (Mark):
- . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
- . ZALLOC the length list in inflate_trees_fixed() instead of using stack
- . ZALLOC the value area for huft_build() instead of using stack
- . Simplify Z_FINISH check in inflate()
-
-- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
-- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
-- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
-  the declaration of FAR (Gilles VOllant)
-- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
-- read_buf buf parameter of type Bytef* instead of charf*
-- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
-- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
-- fix check for presence of directories in "make install" (Ian Willis)
-
-Changes in 1.0.8 (27 Jan 1998)
-- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
-- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
-- added compress2() to allow setting the compression level
-- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
-- use constant arrays for the static trees in trees.c instead of computing
-  them at run time (thanks to Ken Raeburn for this suggestion). To create
-  trees.h, compile with GEN_TREES_H and run "make test".
-- check return code of example in "make test" and display result
-- pass minigzip command line options to file_compress
-- simplifying code of inflateSync to avoid gcc 2.8 bug
-
-- support CC="gcc -Wall" in configure -s (QingLong)
-- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
-- fix test for shared library support to avoid compiler warnings
-- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
-- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
-- do not use fdopen for Metrowerks on Mac (Brad Pettit))
-- add checks for gzputc and gzputc in example.c
-- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
-- use const for the CRC table (Ken Raeburn)
-- fixed "make uninstall" for shared libraries
-- use Tracev instead of Trace in infblock.c
-- in example.c use correct compressed length for test_sync
-- suppress +vnocompatwarnings in configure for HPUX (not always supported)
-
-Changes in 1.0.7 (20 Jan 1998)
-- fix gzseek which was broken in write mode
-- return error for gzseek to negative absolute position
-- fix configure for Linux (Chun-Chung Chen)
-- increase stack space for MSC (Tim Wegner)
-- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
-- define EXPORTVA for gzprintf (Gilles Vollant)
-- added man page zlib.3 (Rick Rodgers)
-- for contrib/untgz, fix makedir() and improve Makefile
-
-- check gzseek in write mode in example.c
-- allocate extra buffer for seeks only if gzseek is actually called
-- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
-- add inflateSyncPoint in zconf.h
-- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
-
-Changes in 1.0.6 (19 Jan 1998)
-- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
-  gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
-- Fix a deflate bug occurring only with compression level 0 (thanks to
-  Andy Buckler for finding this one).
-- In minigzip, pass transparently also the first byte for .Z files.
-- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
-- check Z_FINISH in inflate (thanks to Marc Schluper)
-- Implement deflateCopy (thanks to Adam Costello)
-- make static libraries by default in configure, add --shared option.
-- move MSDOS or Windows specific files to directory msdos
-- suppress the notion of partial flush to simplify the interface
-  (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
-- suppress history buffer provided by application to simplify the interface
-  (this feature was not implemented anyway in 1.0.4)
-- next_in and avail_in must be initialized before calling inflateInit or
-  inflateInit2
-- add EXPORT in all exported functions (for Windows DLL)
-- added Makefile.nt (thanks to Stephen Williams)
-- added the unsupported "contrib" directory:
-   contrib/asm386/ by Gilles Vollant <info@winimage.com>
-        386 asm code replacing longest_match().
-   contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
-        A C++ I/O streams interface to the zlib gz* functions
-   contrib/iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
-        Another C++ I/O streams interface
-   contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
-        A very simple tar.gz file extractor using zlib
-   contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
-        How to use compress(), uncompress() and the gz* functions from VB.
-- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
-  level) in minigzip (thanks to Tom Lane)
-
-- use const for rommable constants in deflate
-- added test for gzseek and gztell in example.c
-- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
-- add undocumented function zError to convert error code to string
-  (for Tim Smithers)
-- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
-- Use default memcpy for Symantec MSDOS compiler.
-- Add EXPORT keyword for check_func (needed for Windows DLL)
-- add current directory to LD_LIBRARY_PATH for "make test"
-- create also a link for libz.so.1
-- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
-- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
-- added -soname for Linux in configure (Chun-Chung Chen,
-- assign numbers to the exported functions in zlib.def (for Windows DLL)
-- add advice in zlib.h for best usage of deflateSetDictionary
-- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
-- allow compilation with ANSI keywords only enabled for TurboC in large model
-- avoid "versionString"[0] (Borland bug)
-- add NEED_DUMMY_RETURN for Borland
-- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
-- allow compilation with CC
-- defined STDC for OS/2 (David Charlap)
-- limit external names to 8 chars for MVS (Thomas Lund)
-- in minigzip.c, use static buffers only for 16-bit systems
-- fix suffix check for "minigzip -d foo.gz"
-- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
-- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
-- added makelcc.bat for lcc-win32 (Tom St Denis)
-- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
-- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
-- check for unistd.h in configure (for off_t)
-- remove useless check parameter in inflate_blocks_free
-- avoid useless assignment of s->check to itself in inflate_blocks_new
-- do not flush twice in gzclose (thanks to Ken Raeburn)
-- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
-- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
-- work around buggy fclose on pipes for HP/UX
-- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
-- fix configure if CC is already equal to gcc
-
-Changes in 1.0.5 (3 Jan 98)
-- Fix inflate to terminate gracefully when fed corrupted or invalid data
-- Use const for rommable constants in inflate
-- Eliminate memory leaks on error conditions in inflate
-- Removed some vestigial code in inflate
-- Update web address in README
-
-Changes in 1.0.4 (24 Jul 96)
-- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
-  bit, so the decompressor could decompress all the correct data but went
-  on to attempt decompressing extra garbage data. This affected minigzip too.
-- zlibVersion and gzerror return const char* (needed for DLL)
-- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
-- use z_error only for DEBUG (avoid problem with DLLs)
-
-Changes in 1.0.3 (2 Jul 96)
-- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
-  small and medium models; this makes the library incompatible with previous
-  versions for these models. (No effect in large model or on other systems.)
-- return OK instead of BUF_ERROR if previous deflate call returned with
-  avail_out as zero but there is nothing to do
-- added memcmp for non STDC compilers
-- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
-- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
-- better check for 16-bit mode MSC (avoids problem with Symantec)
-
-Changes in 1.0.2 (23 May 96)
-- added Windows DLL support
-- added a function zlibVersion (for the DLL support)
-- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
-- Bytef is define's instead of typedef'd only for Borland C
-- avoid reading uninitialized memory in example.c
-- mention in README that the zlib format is now RFC1950
-- updated Makefile.dj2
-- added algorithm.doc
-
-Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
-- fix array overlay in deflate.c which sometimes caused bad compressed data
-- fix inflate bug with empty stored block
-- fix MSDOS medium model which was broken in 0.99
-- fix deflateParams() which could generate bad compressed data.
-- Bytef is define'd instead of typedef'ed (work around Borland bug)
-- added an INDEX file
-- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
-  Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
-- speed up adler32 for modern machines without auto-increment
-- added -ansi for IRIX in configure
-- static_init_done in trees.c is an int
-- define unlink as delete for VMS
-- fix configure for QNX
-- add configure branch for SCO and HPUX
-- avoid many warnings (unused variables, dead assignments, etc...)
-- no fdopen for BeOS
-- fix the Watcom fix for 32 bit mode (define FAR as empty)
-- removed redefinition of Byte for MKWERKS
-- work around an MWKERKS bug (incorrect merge of all .h files)
-
-Changes in 0.99 (27 Jan 96)
-- allow preset dictionary shared between compressor and decompressor
-- allow compression level 0 (no compression)
-- add deflateParams in zlib.h: allow dynamic change of compression level
-  and compression strategy.
-- test large buffers and deflateParams in example.c
-- add optional "configure" to build zlib as a shared library
-- suppress Makefile.qnx, use configure instead
-- fixed deflate for 64-bit systems (detected on Cray)
-- fixed inflate_blocks for 64-bit systems (detected on Alpha)
-- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
-- always return Z_BUF_ERROR when deflate() has nothing to do
-- deflateInit and inflateInit are now macros to allow version checking
-- prefix all global functions and types with z_ with -DZ_PREFIX
-- make falloc completely reentrant (inftrees.c)
-- fixed very unlikely race condition in ct_static_init
-- free in reverse order of allocation to help memory manager
-- use zlib-1.0/* instead of zlib/* inside the tar.gz
-- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
-  -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
-- allow gzread on concatenated .gz files
-- deflateEnd now returns Z_DATA_ERROR if it was premature
-- deflate is finally (?) fully deterministic (no matches beyond end of input)
-- Document Z_SYNC_FLUSH
-- add uninstall in Makefile
-- Check for __cpluplus in zlib.h
-- Better test in ct_align for partial flush
-- avoid harmless warnings for Borland C++
-- initialize hash_head in deflate.c
-- avoid warning on fdopen (gzio.c) for HP cc -Aa
-- include stdlib.h for STDC compilers
-- include errno.h for Cray
-- ignore error if ranlib doesn't exist
-- call ranlib twice for NeXTSTEP
-- use exec_prefix instead of prefix for libz.a
-- renamed ct_* as _tr_* to avoid conflict with applications
-- clear z->msg in inflateInit2 before any error return
-- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
-- fixed typo in zconf.h (_GNUC__ => __GNUC__)
-- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
-- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
-- in fcalloc, normalize pointer if size > 65520 bytes
-- don't use special fcalloc for 32 bit Borland C++
-- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
-- use Z_BINARY instead of BINARY
-- document that gzclose after gzdopen will close the file
-- allow "a" as mode in gzopen.
-- fix error checking in gzread
-- allow skipping .gz extra-field on pipes
-- added reference to Perl interface in README
-- put the crc table in FAR data (I dislike more and more the medium model :)
-- added get_crc_table
-- added a dimension to all arrays (Borland C can't count).
-- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
-- guard against multiple inclusion of *.h (for precompiled header on Mac)
-- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
-- don't use unsized arrays to avoid silly warnings by Visual C++:
-     warning C4746: 'inflate_mask' : unsized array treated as  '__far'
-     (what's wrong with far data in far model?).
-- define enum out of inflate_blocks_state to allow compilation with C++
-
-Changes in 0.95 (16 Aug 95)
-- fix MSDOS small and medium model (now easier to adapt to any compiler)
-- inlined send_bits
-- fix the final (:-) bug for deflate with flush (output was correct but
-  not completely flushed in rare occasions).
-- default window size is same for compression and decompression
-  (it's now sufficient to set MAX_WBITS in zconf.h).
-- voidp -> voidpf and voidnp -> voidp (for consistency with other
-  typedefs and because voidnp was not near in large model).
-
-Changes in 0.94 (13 Aug 95)
-- support MSDOS medium model
-- fix deflate with flush (could sometimes generate bad output)
-- fix deflateReset (zlib header was incorrectly suppressed)
-- added support for VMS
-- allow a compression level in gzopen()
-- gzflush now calls fflush
-- For deflate with flush, flush even if no more input is provided.
-- rename libgz.a as libz.a
-- avoid complex expression in infcodes.c triggering Turbo C bug
-- work around a problem with gcc on Alpha (in INSERT_STRING)
-- don't use inline functions (problem with some gcc versions)
-- allow renaming of Byte, uInt, etc... with #define.
-- avoid warning about (unused) pointer before start of array in deflate.c
-- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
-- avoid reserved word 'new' in trees.c
-
-Changes in 0.93 (25 June 95)
-- temporarily disable inline functions
-- make deflate deterministic
-- give enough lookahead for PARTIAL_FLUSH
-- Set binary mode for stdin/stdout in minigzip.c for OS/2
-- don't even use signed char in inflate (not portable enough)
-- fix inflate memory leak for segmented architectures
-
-Changes in 0.92 (3 May 95)
-- don't assume that char is signed (problem on SGI)
-- Clear bit buffer when starting a stored block
-- no memcpy on Pyramid
-- suppressed inftest.c
-- optimized fill_window, put longest_match inline for gcc
-- optimized inflate on stored blocks.
-- untabify all sources to simplify patches
-
-Changes in 0.91 (2 May 95)
-- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
-- Document the memory requirements in zconf.h
-- added "make install"
-- fix sync search logic in inflateSync
-- deflate(Z_FULL_FLUSH) now works even if output buffer too short
-- after inflateSync, don't scare people with just "lo world"
-- added support for DJGPP
-
-Changes in 0.9 (1 May 95)
-- don't assume that zalloc clears the allocated memory (the TurboC bug
-  was Mark's bug after all :)
-- let again gzread copy uncompressed data unchanged (was working in 0.71)
-- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
-- added a test of inflateSync in example.c
-- moved MAX_WBITS to zconf.h because users might want to change that.
-- document explicitly that zalloc(64K) on MSDOS must return a normalized
-  pointer (zero offset)
-- added Makefiles for Microsoft C, Turbo C, Borland C++
-- faster crc32()
-
-Changes in 0.8 (29 April 95)
-- added fast inflate (inffast.c)
-- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
-  is incompatible with previous versions of zlib which returned Z_OK.
-- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
-  (actually that was not a compiler bug, see 0.81 above)
-- gzread no longer reads one extra byte in certain cases
-- In gzio destroy(), don't reference a freed structure
-- avoid many warnings for MSDOS
-- avoid the ERROR symbol which is used by MS Windows
-
-Changes in 0.71 (14 April 95)
-- Fixed more MSDOS compilation problems :( There is still a bug with
-  TurboC large model.
-
-Changes in 0.7 (14 April 95)
-- Added full inflate support.
-- Simplified the crc32() interface. The pre- and post-conditioning
-  (one's complement) is now done inside crc32(). WARNING: this is
-  incompatible with previous versions; see zlib.h for the new usage.
-
-Changes in 0.61 (12 April 95)
-- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
-
-Changes in 0.6 (11 April 95)
-- added minigzip.c
-- added gzdopen to reopen a file descriptor as gzFile
-- added transparent reading of non-gziped files in gzread.
-- fixed bug in gzread (don't read crc as data)
-- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
-- don't allocate big arrays in the stack (for MSDOS)
-- fix some MSDOS compilation problems
-
-Changes in 0.5:
-- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
-  not yet Z_FULL_FLUSH.
-- support decompression but only in a single step (forced Z_FINISH)
-- added opaque object for zalloc and zfree.
-- added deflateReset and inflateReset
-- added a variable zlib_version for consistency checking.
-- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
-  Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
-
-Changes in 0.4:
-- avoid "zip" everywhere, use zlib instead of ziplib.
-- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
-  if compression method == 8.
-- added adler32 and crc32
-- renamed deflateOptions as deflateInit2, call one or the other but not both
-- added the method parameter for deflateInit2.
-- added inflateInit2
-- simplied considerably deflateInit and inflateInit by not supporting
-  user-provided history buffer. This is supported only in deflateInit2
-  and inflateInit2.
-
-Changes in 0.3:
-- prefix all macro names with Z_
-- use Z_FINISH instead of deflateEnd to finish compression.
-- added Z_HUFFMAN_ONLY
-- added gzerror()
diff --git a/Modules/zlib/FAQ b/Modules/zlib/FAQ
deleted file mode 100644
index 99b7cf9..0000000
--- a/Modules/zlib/FAQ
+++ /dev/null
@@ -1,368 +0,0 @@
-
-                Frequently Asked Questions about zlib
-
-
-If your question is not there, please check the zlib home page
-http://zlib.net/ which may have more recent information.
-The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
-
-
- 1. Is zlib Y2K-compliant?
-
-    Yes. zlib doesn't handle dates.
-
- 2. Where can I get a Windows DLL version?
-
-    The zlib sources can be compiled without change to produce a DLL.  See the
-    file win32/DLL_FAQ.txt in the zlib distribution.  Pointers to the
-    precompiled DLL are found in the zlib web site at http://zlib.net/ .
-
- 3. Where can I get a Visual Basic interface to zlib?
-
-    See
-        * http://marknelson.us/1997/01/01/zlib-engine/
-        * win32/DLL_FAQ.txt in the zlib distribution
-
- 4. compress() returns Z_BUF_ERROR.
-
-    Make sure that before the call of compress(), the length of the compressed
-    buffer is equal to the available size of the compressed buffer and not
-    zero.  For Visual Basic, check that this parameter is passed by reference
-    ("as any"), not by value ("as long").
-
- 5. deflate() or inflate() returns Z_BUF_ERROR.
-
-    Before making the call, make sure that avail_in and avail_out are not zero.
-    When setting the parameter flush equal to Z_FINISH, also make sure that
-    avail_out is big enough to allow processing all pending input.  Note that a
-    Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be
-    made with more input or output space.  A Z_BUF_ERROR may in fact be
-    unavoidable depending on how the functions are used, since it is not
-    possible to tell whether or not there is more output pending when
-    strm.avail_out returns with zero.  See http://zlib.net/zlib_how.html for a
-    heavily annotated example.
-
- 6. Where's the zlib documentation (man pages, etc.)?
-
-    It's in zlib.h .  Examples of zlib usage are in the files test/example.c
-    and test/minigzip.c, with more in examples/ .
-
- 7. Why don't you use GNU autoconf or libtool or ...?
-
-    Because we would like to keep zlib as a very small and simple package.
-    zlib is rather portable and doesn't need much configuration.
-
- 8. I found a bug in zlib.
-
-    Most of the time, such problems are due to an incorrect usage of zlib.
-    Please try to reproduce the problem with a small program and send the
-    corresponding source to us at zlib@gzip.org .  Do not send multi-megabyte
-    data files without prior agreement.
-
- 9. Why do I get "undefined reference to gzputc"?
-
-    If "make test" produces something like
-
-       example.o(.text+0x154): undefined reference to `gzputc'
-
-    check that you don't have old files libz.* in /usr/lib, /usr/local/lib or
-    /usr/X11R6/lib. Remove any old versions, then do "make install".
-
-10. I need a Delphi interface to zlib.
-
-    See the contrib/delphi directory in the zlib distribution.
-
-11. Can zlib handle .zip archives?
-
-    Not by itself, no.  See the directory contrib/minizip in the zlib
-    distribution.
-
-12. Can zlib handle .Z files?
-
-    No, sorry.  You have to spawn an uncompress or gunzip subprocess, or adapt
-    the code of uncompress on your own.
-
-13. How can I make a Unix shared library?
-
-    By default a shared (and a static) library is built for Unix.  So:
-
-    make distclean
-    ./configure
-    make
-
-14. How do I install a shared zlib library on Unix?
-
-    After the above, then:
-
-    make install
-
-    However, many flavors of Unix come with a shared zlib already installed.
-    Before going to the trouble of compiling a shared version of zlib and
-    trying to install it, you may want to check if it's already there!  If you
-    can #include <zlib.h>, it's there.  The -lz option will probably link to
-    it.  You can check the version at the top of zlib.h or with the
-    ZLIB_VERSION symbol defined in zlib.h .
-
-15. I have a question about OttoPDF.
-
-    We are not the authors of OttoPDF. The real author is on the OttoPDF web
-    site: Joel Hainley, jhainley@myndkryme.com.
-
-16. Can zlib decode Flate data in an Adobe PDF file?
-
-    Yes. See http://www.pdflib.com/ . To modify PDF forms, see
-    http://sourceforge.net/projects/acroformtool/ .
-
-17. Why am I getting this "register_frame_info not found" error on Solaris?
-
-    After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
-    generates an error such as:
-
-        ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
-        symbol __register_frame_info: referenced symbol not found
-
-    The symbol __register_frame_info is not part of zlib, it is generated by
-    the C compiler (cc or gcc).  You must recompile applications using zlib
-    which have this problem.  This problem is specific to Solaris.  See
-    http://www.sunfreeware.com for Solaris versions of zlib and applications
-    using zlib.
-
-18. Why does gzip give an error on a file I make with compress/deflate?
-
-    The compress and deflate functions produce data in the zlib format, which
-    is different and incompatible with the gzip format.  The gz* functions in
-    zlib on the other hand use the gzip format.  Both the zlib and gzip formats
-    use the same compressed data format internally, but have different headers
-    and trailers around the compressed data.
-
-19. Ok, so why are there two different formats?
-
-    The gzip format was designed to retain the directory information about a
-    single file, such as the name and last modification date.  The zlib format
-    on the other hand was designed for in-memory and communication channel
-    applications, and has a much more compact header and trailer and uses a
-    faster integrity check than gzip.
-
-20. Well that's nice, but how do I make a gzip file in memory?
-
-    You can request that deflate write the gzip format instead of the zlib
-    format using deflateInit2().  You can also request that inflate decode the
-    gzip format using inflateInit2().  Read zlib.h for more details.
-
-21. Is zlib thread-safe?
-
-    Yes.  However any library routines that zlib uses and any application-
-    provided memory allocation routines must also be thread-safe.  zlib's gz*
-    functions use stdio library routines, and most of zlib's functions use the
-    library memory allocation routines by default.  zlib's *Init* functions
-    allow for the application to provide custom memory allocation routines.
-
-    Of course, you should only operate on any given zlib or gzip stream from a
-    single thread at a time.
-
-22. Can I use zlib in my commercial application?
-
-    Yes.  Please read the license in zlib.h.
-
-23. Is zlib under the GNU license?
-
-    No.  Please read the license in zlib.h.
-
-24. The license says that altered source versions must be "plainly marked". So
-    what exactly do I need to do to meet that requirement?
-
-    You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h.  In
-    particular, the final version number needs to be changed to "f", and an
-    identification string should be appended to ZLIB_VERSION.  Version numbers
-    x.x.x.f are reserved for modifications to zlib by others than the zlib
-    maintainers.  For example, if the version of the base zlib you are altering
-    is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and
-    ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3".  You can also
-    update the version strings in deflate.c and inftrees.c.
-
-    For altered source distributions, you should also note the origin and
-    nature of the changes in zlib.h, as well as in ChangeLog and README, along
-    with the dates of the alterations.  The origin should include at least your
-    name (or your company's name), and an email address to contact for help or
-    issues with the library.
-
-    Note that distributing a compiled zlib library along with zlib.h and
-    zconf.h is also a source distribution, and so you should change
-    ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes
-    in zlib.h as you would for a full source distribution.
-
-25. Will zlib work on a big-endian or little-endian architecture, and can I
-    exchange compressed data between them?
-
-    Yes and yes.
-
-26. Will zlib work on a 64-bit machine?
-
-    Yes.  It has been tested on 64-bit machines, and has no dependence on any
-    data types being limited to 32-bits in length.  If you have any
-    difficulties, please provide a complete problem report to zlib@gzip.org
-
-27. Will zlib decompress data from the PKWare Data Compression Library?
-
-    No.  The PKWare DCL uses a completely different compressed data format than
-    does PKZIP and zlib.  However, you can look in zlib's contrib/blast
-    directory for a possible solution to your problem.
-
-28. Can I access data randomly in a compressed stream?
-
-    No, not without some preparation.  If when compressing you periodically use
-    Z_FULL_FLUSH, carefully write all the pending data at those points, and
-    keep an index of those locations, then you can start decompression at those
-    points.  You have to be careful to not use Z_FULL_FLUSH too often, since it
-    can significantly degrade compression.  Alternatively, you can scan a
-    deflate stream once to generate an index, and then use that index for
-    random access.  See examples/zran.c .
-
-29. Does zlib work on MVS, OS/390, CICS, etc.?
-
-    It has in the past, but we have not heard of any recent evidence.  There
-    were working ports of zlib 1.1.4 to MVS, but those links no longer work.
-    If you know of recent, successful applications of zlib on these operating
-    systems, please let us know.  Thanks.
-
-30. Is there some simpler, easier to read version of inflate I can look at to
-    understand the deflate format?
-
-    First off, you should read RFC 1951.  Second, yes.  Look in zlib's
-    contrib/puff directory.
-
-31. Does zlib infringe on any patents?
-
-    As far as we know, no.  In fact, that was originally the whole point behind
-    zlib.  Look here for some more information:
-
-    http://www.gzip.org/#faq11
-
-32. Can zlib work with greater than 4 GB of data?
-
-    Yes.  inflate() and deflate() will process any amount of data correctly.
-    Each call of inflate() or deflate() is limited to input and output chunks
-    of the maximum value that can be stored in the compiler's "unsigned int"
-    type, but there is no limit to the number of chunks.  Note however that the
-    strm.total_in and strm_total_out counters may be limited to 4 GB.  These
-    counters are provided as a convenience and are not used internally by
-    inflate() or deflate().  The application can easily set up its own counters
-    updated after each call of inflate() or deflate() to count beyond 4 GB.
-    compress() and uncompress() may be limited to 4 GB, since they operate in a
-    single call.  gzseek() and gztell() may be limited to 4 GB depending on how
-    zlib is compiled.  See the zlibCompileFlags() function in zlib.h.
-
-    The word "may" appears several times above since there is a 4 GB limit only
-    if the compiler's "long" type is 32 bits.  If the compiler's "long" type is
-    64 bits, then the limit is 16 exabytes.
-
-33. Does zlib have any security vulnerabilities?
-
-    The only one that we are aware of is potentially in gzprintf().  If zlib is
-    compiled to use sprintf() or vsprintf(), then there is no protection
-    against a buffer overflow of an 8K string space (or other value as set by
-    gzbuffer()), other than the caller of gzprintf() assuring that the output
-    will not exceed 8K.  On the other hand, if zlib is compiled to use
-    snprintf() or vsnprintf(), which should normally be the case, then there is
-    no vulnerability.  The ./configure script will display warnings if an
-    insecure variation of sprintf() will be used by gzprintf().  Also the
-    zlibCompileFlags() function will return information on what variant of
-    sprintf() is used by gzprintf().
-
-    If you don't have snprintf() or vsnprintf() and would like one, you can
-    find a portable implementation here:
-
-        http://www.ijs.si/software/snprintf/
-
-    Note that you should be using the most recent version of zlib.  Versions
-    1.1.3 and before were subject to a double-free vulnerability, and versions
-    1.2.1 and 1.2.2 were subject to an access exception when decompressing
-    invalid compressed data.
-
-34. Is there a Java version of zlib?
-
-    Probably what you want is to use zlib in Java. zlib is already included
-    as part of the Java SDK in the java.util.zip package. If you really want
-    a version of zlib written in the Java language, look on the zlib home
-    page for links: http://zlib.net/ .
-
-35. I get this or that compiler or source-code scanner warning when I crank it
-    up to maximally-pedantic. Can't you guys write proper code?
-
-    Many years ago, we gave up attempting to avoid warnings on every compiler
-    in the universe.  It just got to be a waste of time, and some compilers
-    were downright silly as well as contradicted each other.  So now, we simply
-    make sure that the code always works.
-
-36. Valgrind (or some similar memory access checker) says that deflate is
-    performing a conditional jump that depends on an uninitialized value.
-    Isn't that a bug?
-
-    No.  That is intentional for performance reasons, and the output of deflate
-    is not affected.  This only started showing up recently since zlib 1.2.x
-    uses malloc() by default for allocations, whereas earlier versions used
-    calloc(), which zeros out the allocated memory.  Even though the code was
-    correct, versions 1.2.4 and later was changed to not stimulate these
-    checkers.
-
-37. Will zlib read the (insert any ancient or arcane format here) compressed
-    data format?
-
-    Probably not. Look in the comp.compression FAQ for pointers to various
-    formats and associated software.
-
-38. How can I encrypt/decrypt zip files with zlib?
-
-    zlib doesn't support encryption.  The original PKZIP encryption is very
-    weak and can be broken with freely available programs.  To get strong
-    encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib
-    compression.  For PKZIP compatible "encryption", look at
-    http://www.info-zip.org/
-
-39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
-
-    "gzip" is the gzip format, and "deflate" is the zlib format.  They should
-    probably have called the second one "zlib" instead to avoid confusion with
-    the raw deflate compressed data format.  While the HTTP 1.1 RFC 2616
-    correctly points to the zlib specification in RFC 1950 for the "deflate"
-    transfer encoding, there have been reports of servers and browsers that
-    incorrectly produce or expect raw deflate data per the deflate
-    specification in RFC 1951, most notably Microsoft.  So even though the
-    "deflate" transfer encoding using the zlib format would be the more
-    efficient approach (and in fact exactly what the zlib format was designed
-    for), using the "gzip" transfer encoding is probably more reliable due to
-    an unfortunate choice of name on the part of the HTTP 1.1 authors.
-
-    Bottom line: use the gzip format for HTTP 1.1 encoding.
-
-40. Does zlib support the new "Deflate64" format introduced by PKWare?
-
-    No.  PKWare has apparently decided to keep that format proprietary, since
-    they have not documented it as they have previous compression formats.  In
-    any case, the compression improvements are so modest compared to other more
-    modern approaches, that it's not worth the effort to implement.
-
-41. I'm having a problem with the zip functions in zlib, can you help?
-
-    There are no zip functions in zlib.  You are probably using minizip by
-    Giles Vollant, which is found in the contrib directory of zlib.  It is not
-    part of zlib.  In fact none of the stuff in contrib is part of zlib.  The
-    files in there are not supported by the zlib authors.  You need to contact
-    the authors of the respective contribution for help.
-
-42. The match.asm code in contrib is under the GNU General Public License.
-    Since it's part of zlib, doesn't that mean that all of zlib falls under the
-    GNU GPL?
-
-    No.  The files in contrib are not part of zlib.  They were contributed by
-    other authors and are provided as a convenience to the user within the zlib
-    distribution.  Each item in contrib has its own license.
-
-43. Is zlib subject to export controls?  What is its ECCN?
-
-    zlib is not subject to export controls, and so is classified as EAR99.
-
-44. Can you please sign these lengthy legal documents and fax them back to us
-    so that we can use your software in our product?
-
-    No. Go away. Shoo.
diff --git a/Modules/zlib/INDEX b/Modules/zlib/INDEX
deleted file mode 100644
index 2ba0641..0000000
--- a/Modules/zlib/INDEX
+++ /dev/null
@@ -1,68 +0,0 @@
-CMakeLists.txt  cmake build file
-ChangeLog       history of changes
-FAQ             Frequently Asked Questions about zlib
-INDEX           this file
-Makefile        dummy Makefile that tells you to ./configure
-Makefile.in     template for Unix Makefile
-README          guess what
-configure       configure script for Unix
-make_vms.com    makefile for VMS
-test/example.c  zlib usages examples for build testing
-test/minigzip.c minimal gzip-like functionality for build testing
-test/infcover.c inf*.c code coverage for build coverage testing
-treebuild.xml   XML description of source file dependencies
-zconf.h.cmakein zconf.h template for cmake
-zconf.h.in      zconf.h template for configure
-zlib.3          Man page for zlib
-zlib.3.pdf      Man page in PDF format
-zlib.map        Linux symbol information
-zlib.pc.in      Template for pkg-config descriptor
-zlib.pc.cmakein zlib.pc template for cmake
-zlib2ansi       perl script to convert source files for C++ compilation
-
-amiga/          makefiles for Amiga SAS C
-as400/          makefiles for AS/400
-doc/            documentation for formats and algorithms
-msdos/          makefiles for MSDOS
-nintendods/     makefile for Nintendo DS
-old/            makefiles for various architectures and zlib documentation
-                files that have not yet been updated for zlib 1.2.x
-qnx/            makefiles for QNX
-watcom/         makefiles for OpenWatcom
-win32/          makefiles for Windows
-
-                zlib public header files (required for library use):
-zconf.h
-zlib.h
-
-                private source files used to build the zlib library:
-adler32.c
-compress.c
-crc32.c
-crc32.h
-deflate.c
-deflate.h
-gzclose.c
-gzguts.h
-gzlib.c
-gzread.c
-gzwrite.c
-infback.c
-inffast.c
-inffast.h
-inffixed.h
-inflate.c
-inflate.h
-inftrees.c
-inftrees.h
-trees.c
-trees.h
-uncompr.c
-zutil.c
-zutil.h
-
-                source files for sample programs
-See examples/README.examples
-
-                unsupported contributions by third parties
-See contrib/README.contrib
diff --git a/Modules/zlib/Makefile b/Modules/zlib/Makefile
deleted file mode 100644
index 6bba86c..0000000
--- a/Modules/zlib/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-all:
-	-@echo "Please use ./configure first.  Thank you."
-
-distclean:
-	make -f Makefile.in distclean
diff --git a/Modules/zlib/Makefile.in b/Modules/zlib/Makefile.in
deleted file mode 100644
index 1852192..0000000
--- a/Modules/zlib/Makefile.in
+++ /dev/null
@@ -1,410 +0,0 @@
-# Makefile for zlib
-# Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile and test, type:
-#    ./configure; make test
-# Normally configure builds both a static and a shared library.
-# If you want to build just a static library, use: ./configure --static
-
-# To use the asm code, type:
-#    cp contrib/asm?86/match.S ./match.S
-#    make LOC=-DASMV OBJA=match.o
-
-# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
-#    make install
-# To install in $HOME instead of /usr/local, use:
-#    make install prefix=$HOME
-
-CC=cc
-
-CFLAGS=-O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-g -DZLIB_DEBUG
-#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-#           -Wstrict-prototypes -Wmissing-prototypes
-
-SFLAGS=-O
-LDFLAGS=
-TEST_LDFLAGS=-L. libz.a
-LDSHARED=$(CC)
-CPP=$(CC) -E
-
-STATICLIB=libz.a
-SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.10
-SHAREDLIBM=libz.so.1
-LIBS=$(STATICLIB) $(SHAREDLIBV)
-
-AR=ar
-ARFLAGS=rc
-RANLIB=ranlib
-LDCONFIG=ldconfig
-LDSHAREDLIBC=-lc
-TAR=tar
-SHELL=/bin/sh
-EXE=
-
-prefix = /usr/local
-exec_prefix = ${prefix}
-libdir = ${exec_prefix}/lib
-sharedlibdir = ${libdir}
-includedir = ${prefix}/include
-mandir = ${prefix}/share/man
-man3dir = ${mandir}/man3
-pkgconfigdir = ${libdir}/pkgconfig
-SRCDIR=
-ZINC=
-ZINCOUT=-I.
-
-OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o
-OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
-OBJC = $(OBJZ) $(OBJG)
-
-PIC_OBJZ = adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo
-PIC_OBJG = compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo
-PIC_OBJC = $(PIC_OBJZ) $(PIC_OBJG)
-
-# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
-OBJA =
-PIC_OBJA =
-
-OBJS = $(OBJC) $(OBJA)
-
-PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA)
-
-all: static shared
-
-static: example$(EXE) minigzip$(EXE)
-
-shared: examplesh$(EXE) minigzipsh$(EXE)
-
-all64: example64$(EXE) minigzip64$(EXE)
-
-check: test
-
-test: all teststatic testshared
-
-teststatic: static
-	@TMPST=tmpst_$$; \
-	if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \
-	  echo '		*** zlib test OK ***'; \
-	else \
-	  echo '		*** zlib test FAILED ***'; false; \
-	fi; \
-	rm -f $$TMPST
-
-testshared: shared
-	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
-	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
-	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
-	TMPSH=tmpsh_$$; \
-	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \
-	  echo '		*** zlib shared test OK ***'; \
-	else \
-	  echo '		*** zlib shared test FAILED ***'; false; \
-	fi; \
-	rm -f $$TMPSH
-
-test64: all64
-	@TMP64=tmp64_$$; \
-	if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \
-	  echo '		*** zlib 64-bit test OK ***'; \
-	else \
-	  echo '		*** zlib 64-bit test FAILED ***'; false; \
-	fi; \
-	rm -f $$TMP64
-
-infcover.o: $(SRCDIR)test/infcover.c $(SRCDIR)zlib.h zconf.h
-	$(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/infcover.c
-
-infcover: infcover.o libz.a
-	$(CC) $(CFLAGS) -o $@ infcover.o libz.a
-
-cover: infcover
-	rm -f *.gcda
-	./infcover
-	gcov inf*.c
-
-libz.a: $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-
-match.o: match.S
-	$(CPP) match.S > _match.s
-	$(CC) -c _match.s
-	mv _match.o match.o
-	rm -f _match.s
-
-match.lo: match.S
-	$(CPP) match.S > _match.s
-	$(CC) -c -fPIC _match.s
-	mv _match.o match.lo
-	rm -f _match.s
-
-example.o: $(SRCDIR)test/example.c $(SRCDIR)zlib.h zconf.h
-	$(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/example.c
-
-minigzip.o: $(SRCDIR)test/minigzip.c $(SRCDIR)zlib.h zconf.h
-	$(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/minigzip.c
-
-example64.o: $(SRCDIR)test/example.c $(SRCDIR)zlib.h zconf.h
-	$(CC) $(CFLAGS) $(ZINCOUT) -D_FILE_OFFSET_BITS=64 -c -o $@ $(SRCDIR)test/example.c
-
-minigzip64.o: $(SRCDIR)test/minigzip.c $(SRCDIR)zlib.h zconf.h
-	$(CC) $(CFLAGS) $(ZINCOUT) -D_FILE_OFFSET_BITS=64 -c -o $@ $(SRCDIR)test/minigzip.c
-
-
-adler32.o: $(SRCDIR)adler32.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)adler32.c
-
-crc32.o: $(SRCDIR)crc32.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)crc32.c
-
-deflate.o: $(SRCDIR)deflate.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)deflate.c
-
-infback.o: $(SRCDIR)infback.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)infback.c
-
-inffast.o: $(SRCDIR)inffast.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inffast.c
-
-inflate.o: $(SRCDIR)inflate.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inflate.c
-
-inftrees.o: $(SRCDIR)inftrees.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inftrees.c
-
-trees.o: $(SRCDIR)trees.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)trees.c
-
-zutil.o: $(SRCDIR)zutil.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)zutil.c
-
-compress.o: $(SRCDIR)compress.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)compress.c
-
-uncompr.o: $(SRCDIR)uncompr.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)uncompr.c
-
-gzclose.o: $(SRCDIR)gzclose.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzclose.c
-
-gzlib.o: $(SRCDIR)gzlib.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzlib.c
-
-gzread.o: $(SRCDIR)gzread.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzread.c
-
-gzwrite.o: $(SRCDIR)gzwrite.c
-	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzwrite.c
-
-
-adler32.lo: $(SRCDIR)adler32.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/adler32.o $(SRCDIR)adler32.c
-	-@mv objs/adler32.o $@
-
-crc32.lo: $(SRCDIR)crc32.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/crc32.o $(SRCDIR)crc32.c
-	-@mv objs/crc32.o $@
-
-deflate.lo: $(SRCDIR)deflate.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/deflate.o $(SRCDIR)deflate.c
-	-@mv objs/deflate.o $@
-
-infback.lo: $(SRCDIR)infback.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/infback.o $(SRCDIR)infback.c
-	-@mv objs/infback.o $@
-
-inffast.lo: $(SRCDIR)inffast.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inffast.o $(SRCDIR)inffast.c
-	-@mv objs/inffast.o $@
-
-inflate.lo: $(SRCDIR)inflate.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inflate.o $(SRCDIR)inflate.c
-	-@mv objs/inflate.o $@
-
-inftrees.lo: $(SRCDIR)inftrees.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inftrees.o $(SRCDIR)inftrees.c
-	-@mv objs/inftrees.o $@
-
-trees.lo: $(SRCDIR)trees.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/trees.o $(SRCDIR)trees.c
-	-@mv objs/trees.o $@
-
-zutil.lo: $(SRCDIR)zutil.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/zutil.o $(SRCDIR)zutil.c
-	-@mv objs/zutil.o $@
-
-compress.lo: $(SRCDIR)compress.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/compress.o $(SRCDIR)compress.c
-	-@mv objs/compress.o $@
-
-uncompr.lo: $(SRCDIR)uncompr.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/uncompr.o $(SRCDIR)uncompr.c
-	-@mv objs/uncompr.o $@
-
-gzclose.lo: $(SRCDIR)gzclose.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzclose.o $(SRCDIR)gzclose.c
-	-@mv objs/gzclose.o $@
-
-gzlib.lo: $(SRCDIR)gzlib.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzlib.o $(SRCDIR)gzlib.c
-	-@mv objs/gzlib.o $@
-
-gzread.lo: $(SRCDIR)gzread.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzread.o $(SRCDIR)gzread.c
-	-@mv objs/gzread.o $@
-
-gzwrite.lo: $(SRCDIR)gzwrite.c
-	-@mkdir objs 2>/dev/null || test -d objs
-	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzwrite.o $(SRCDIR)gzwrite.c
-	-@mv objs/gzwrite.o $@
-
-
-placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
-	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
-	rm -f $(SHAREDLIB) $(SHAREDLIBM)
-	ln -s $@ $(SHAREDLIB)
-	ln -s $@ $(SHAREDLIBM)
-	-@rmdir objs
-
-example$(EXE): example.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)
-
-minigzip$(EXE): minigzip.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)
-
-examplesh$(EXE): example.o $(SHAREDLIBV)
-	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
-
-minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
-	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
-
-example64$(EXE): example64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)
-
-minigzip64$(EXE): minigzip64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)
-
-install-libs: $(LIBS)
-	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
-	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
-	-@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
-	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
-	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
-	rm -f $(DESTDIR)$(libdir)/$(STATICLIB)
-	cp $(STATICLIB) $(DESTDIR)$(libdir)
-	chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
-	-@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
-	-@if test -n "$(SHAREDLIBV)"; then \
-	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
-	  cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
-	  echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
-	  chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
-	  echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
-	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
-	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
-	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
-	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
-	fi
-	rm -f $(DESTDIR)$(man3dir)/zlib.3
-	cp $(SRCDIR)zlib.3 $(DESTDIR)$(man3dir)
-	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
-	rm -f $(DESTDIR)$(pkgconfigdir)/zlib.pc
-	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
-	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
-# The ranlib in install is needed on NeXTSTEP which checks file times
-# ldconfig is for Linux
-
-install: install-libs
-	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
-	rm -f $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
-	cp $(SRCDIR)zlib.h zconf.h $(DESTDIR)$(includedir)
-	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
-
-uninstall:
-	cd $(DESTDIR)$(includedir) && rm -f zlib.h zconf.h
-	cd $(DESTDIR)$(libdir) && rm -f libz.a; \
-	if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
-	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
-	fi
-	cd $(DESTDIR)$(man3dir) && rm -f zlib.3
-	cd $(DESTDIR)$(pkgconfigdir) && rm -f zlib.pc
-
-docs: zlib.3.pdf
-
-zlib.3.pdf: $(SRCDIR)zlib.3
-	groff -mandoc -f H -T ps $(SRCDIR)zlib.3 | ps2pdf - $@
-
-zconf.h.cmakein: $(SRCDIR)zconf.h.in
-	-@ TEMPFILE=zconfh_$$; \
-	echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\
-	sed -f $$TEMPFILE $(SRCDIR)zconf.h.in > $@ &&\
-	touch -r $(SRCDIR)zconf.h.in $@ &&\
-	rm $$TEMPFILE
-
-zconf: $(SRCDIR)zconf.h.in
-	cp -p $(SRCDIR)zconf.h.in zconf.h
-
-mostlyclean: clean
-clean:
-	rm -f *.o *.lo *~ \
-	   example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
-	   example64$(EXE) minigzip64$(EXE) \
-	   infcover \
-	   libz.* foo.gz so_locations \
-	   _match.s maketree contrib/infback9/*.o
-	rm -rf objs
-	rm -f *.gcda *.gcno *.gcov
-	rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov
-
-maintainer-clean: distclean
-distclean: clean zconf zconf.h.cmakein docs
-	rm -f Makefile zlib.pc configure.log
-	-@rm -f .DS_Store
-	@if [ -f Makefile.in ]; then \
-	printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > Makefile ; \
-	printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile ; \
-	touch -r $(SRCDIR)Makefile.in Makefile ; fi
-	@if [ ! -f zconf.h.in ]; then rm -f zconf.h zconf.h.cmakein ; fi
-	@if [ ! -f zlib.3 ]; then rm -f zlib.3.pdf ; fi
-
-tags:
-	etags $(SRCDIR)*.[ch]
-
-adler32.o zutil.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
-gzclose.o gzlib.o gzread.o gzwrite.o: $(SRCDIR)zlib.h zconf.h $(SRCDIR)gzguts.h
-compress.o example.o minigzip.o uncompr.o: $(SRCDIR)zlib.h zconf.h
-crc32.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)crc32.h
-deflate.o: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
-infback.o inflate.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h $(SRCDIR)inffixed.h
-inffast.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h
-inftrees.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h
-trees.o: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)trees.h
-
-adler32.lo zutil.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
-gzclose.lo gzlib.lo gzread.lo gzwrite.lo: $(SRCDIR)zlib.h zconf.h $(SRCDIR)gzguts.h
-compress.lo example.lo minigzip.lo uncompr.lo: $(SRCDIR)zlib.h zconf.h
-crc32.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)crc32.h
-deflate.lo: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
-infback.lo inflate.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h $(SRCDIR)inffixed.h
-inffast.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h
-inftrees.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h
-trees.lo: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)trees.h
diff --git a/Modules/zlib/README b/Modules/zlib/README
deleted file mode 100644
index 51106de..0000000
--- a/Modules/zlib/README
+++ /dev/null
@@ -1,115 +0,0 @@
-ZLIB DATA COMPRESSION LIBRARY
-
-zlib 1.2.11 is a general purpose data compression library.  All the code is
-thread safe.  The data format used by the zlib library is described by RFCs
-(Request for Comments) 1950 to 1952 in the files
-http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
-rfc1952 (gzip format).
-
-All functions of the compression library are documented in the file zlib.h
-(volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
-of the library is given in the file test/example.c which also tests that
-the library is working correctly.  Another example is given in the file
-test/minigzip.c.  The compression library itself is composed of all source
-files in the root directory.
-
-To compile all files and run the test program, follow the instructions given at
-the top of Makefile.in.  In short "./configure; make test", and if that goes
-well, "make install" should work for most flavors of Unix.  For Windows, use
-one of the special makefiles in win32/ or contrib/vstudio/ .  For VMS, use
-make_vms.com.
-
-Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
-<info@winimage.com> for the Windows DLL version.  The zlib home page is
-http://zlib.net/ .  Before reporting a problem, please check this site to
-verify that you have the latest version of zlib; otherwise get the latest
-version and check whether the problem still exists or not.
-
-PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
-
-Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
-issue of Dr.  Dobb's Journal; a copy of the article is available at
-http://marknelson.us/1997/01/01/zlib-engine/ .
-
-The changes made in version 1.2.11 are documented in the file ChangeLog.
-
-Unsupported third party contributions are provided in directory contrib/ .
-
-zlib is available in Java using the java.util.zip package, documented at
-http://java.sun.com/developer/technicalArticles/Programming/compression/ .
-
-A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
-at CPAN (Comprehensive Perl Archive Network) sites, including
-http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
-
-A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
-available in Python 1.5 and later versions, see
-http://docs.python.org/library/zlib.html .
-
-zlib is built into tcl: http://wiki.tcl.tk/4610 .
-
-An experimental package to read and write files in .zip format, written on top
-of zlib by Gilles Vollant <info@winimage.com>, is available in the
-contrib/minizip directory of zlib.
-
-
-Notes for some targets:
-
-- For Windows DLL versions, please see win32/DLL_FAQ.txt
-
-- For 64-bit Irix, deflate.c must be compiled without any optimization. With
-  -O, one libpng test fails. The test works in 32 bit mode (with the -n32
-  compiler flag). The compiler bug has been reported to SGI.
-
-- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
-  when compiled with cc.
-
-- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
-  necessary to get gzprintf working correctly. This is done by configure.
-
-- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
-  other compilers. Use "make test" to check your compiler.
-
-- gzdopen is not supported on RISCOS or BEOS.
-
-- For PalmOs, see http://palmzlib.sourceforge.net/
-
-
-Acknowledgments:
-
-  The deflate format used by zlib was defined by Phil Katz.  The deflate and
-  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
-  people who reported problems and suggested various improvements in zlib; they
-  are too numerous to cite here.
-
-Copyright notice:
-
- (C) 1995-2017 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  jloup@gzip.org          madler@alumni.caltech.edu
-
-If you use the zlib library in a product, we would appreciate *not* receiving
-lengthy legal documents to sign.  The sources are provided for free but without
-warranty of any kind.  The library has been entirely written by Jean-loup
-Gailly and Mark Adler; it does not include third-party code.
-
-If you redistribute modified sources, we would appreciate that you include in
-the file ChangeLog history information documenting your changes.  Please read
-the FAQ for more information on the distribution of modified source versions.
diff --git a/Modules/zlib/adler32.c b/Modules/zlib/adler32.c
deleted file mode 100644
index d0be438..0000000
--- a/Modules/zlib/adler32.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2011, 2016 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zutil.h"
-
-local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
-
-#define BASE 65521U     /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
-#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf)   DO8(buf,0); DO8(buf,8);
-
-/* use NO_DIVIDE if your processor does not do division in hardware --
-   try it both ways to see which is faster */
-#ifdef NO_DIVIDE
-/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
-   (thank you to John Reiser for pointing this out) */
-#  define CHOP(a) \
-    do { \
-        unsigned long tmp = a >> 16; \
-        a &= 0xffffUL; \
-        a += (tmp << 4) - tmp; \
-    } while (0)
-#  define MOD28(a) \
-    do { \
-        CHOP(a); \
-        if (a >= BASE) a -= BASE; \
-    } while (0)
-#  define MOD(a) \
-    do { \
-        CHOP(a); \
-        MOD28(a); \
-    } while (0)
-#  define MOD63(a) \
-    do { /* this assumes a is not negative */ \
-        z_off64_t tmp = a >> 32; \
-        a &= 0xffffffffL; \
-        a += (tmp << 8) - (tmp << 5) + tmp; \
-        tmp = a >> 16; \
-        a &= 0xffffL; \
-        a += (tmp << 4) - tmp; \
-        tmp = a >> 16; \
-        a &= 0xffffL; \
-        a += (tmp << 4) - tmp; \
-        if (a >= BASE) a -= BASE; \
-    } while (0)
-#else
-#  define MOD(a) a %= BASE
-#  define MOD28(a) a %= BASE
-#  define MOD63(a) a %= BASE
-#endif
-
-/* ========================================================================= */
-uLong ZEXPORT adler32_z(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    z_size_t len;
-{
-    unsigned long sum2;
-    unsigned n;
-
-    /* split Adler-32 into component sums */
-    sum2 = (adler >> 16) & 0xffff;
-    adler &= 0xffff;
-
-    /* in case user likes doing a byte at a time, keep it fast */
-    if (len == 1) {
-        adler += buf[0];
-        if (adler >= BASE)
-            adler -= BASE;
-        sum2 += adler;
-        if (sum2 >= BASE)
-            sum2 -= BASE;
-        return adler | (sum2 << 16);
-    }
-
-    /* initial Adler-32 value (deferred check for len == 1 speed) */
-    if (buf == Z_NULL)
-        return 1L;
-
-    /* in case short lengths are provided, keep it somewhat fast */
-    if (len < 16) {
-        while (len--) {
-            adler += *buf++;
-            sum2 += adler;
-        }
-        if (adler >= BASE)
-            adler -= BASE;
-        MOD28(sum2);            /* only added so many BASE's */
-        return adler | (sum2 << 16);
-    }
-
-    /* do length NMAX blocks -- requires just one modulo operation */
-    while (len >= NMAX) {
-        len -= NMAX;
-        n = NMAX / 16;          /* NMAX is divisible by 16 */
-        do {
-            DO16(buf);          /* 16 sums unrolled */
-            buf += 16;
-        } while (--n);
-        MOD(adler);
-        MOD(sum2);
-    }
-
-    /* do remaining bytes (less than NMAX, still just one modulo) */
-    if (len) {                  /* avoid modulos if none remaining */
-        while (len >= 16) {
-            len -= 16;
-            DO16(buf);
-            buf += 16;
-        }
-        while (len--) {
-            adler += *buf++;
-            sum2 += adler;
-        }
-        MOD(adler);
-        MOD(sum2);
-    }
-
-    /* return recombined sums */
-    return adler | (sum2 << 16);
-}
-
-/* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    uInt len;
-{
-    return adler32_z(adler, buf, len);
-}
-
-/* ========================================================================= */
-local uLong adler32_combine_(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
-    unsigned long sum1;
-    unsigned long sum2;
-    unsigned rem;
-
-    /* for negative len, return invalid adler32 as a clue for debugging */
-    if (len2 < 0)
-        return 0xffffffffUL;
-
-    /* the derivation of this formula is left as an exercise for the reader */
-    MOD63(len2);                /* assumes len2 >= 0 */
-    rem = (unsigned)len2;
-    sum1 = adler1 & 0xffff;
-    sum2 = rem * sum1;
-    MOD(sum2);
-    sum1 += (adler2 & 0xffff) + BASE - 1;
-    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
-    if (sum1 >= BASE) sum1 -= BASE;
-    if (sum1 >= BASE) sum1 -= BASE;
-    if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1);
-    if (sum2 >= BASE) sum2 -= BASE;
-    return sum1 | (sum2 << 16);
-}
-
-/* ========================================================================= */
-uLong ZEXPORT adler32_combine(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off_t len2;
-{
-    return adler32_combine_(adler1, adler2, len2);
-}
-
-uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
-    return adler32_combine_(adler1, adler2, len2);
-}
diff --git a/Modules/zlib/algorithm.txt b/Modules/zlib/algorithm.txt
deleted file mode 100644
index c97f495..0000000
--- a/Modules/zlib/algorithm.txt
+++ /dev/null
@@ -1,209 +0,0 @@
-1. Compression algorithm (deflate)
-
-The deflation algorithm used by gzip (also zip and zlib) is a variation of
-LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
-the input data.  The second occurrence of a string is replaced by a
-pointer to the previous string, in the form of a pair (distance,
-length).  Distances are limited to 32K bytes, and lengths are limited
-to 258 bytes. When a string does not occur anywhere in the previous
-32K bytes, it is emitted as a sequence of literal bytes.  (In this
-description, `string' must be taken as an arbitrary sequence of bytes,
-and is not restricted to printable characters.)
-
-Literals or match lengths are compressed with one Huffman tree, and
-match distances are compressed with another tree. The trees are stored
-in a compact form at the start of each block. The blocks can have any
-size (except that the compressed data for one block must fit in
-available memory). A block is terminated when deflate() determines that
-it would be useful to start another block with fresh trees. (This is
-somewhat similar to the behavior of LZW-based _compress_.)
-
-Duplicated strings are found using a hash table. All input strings of
-length 3 are inserted in the hash table. A hash index is computed for
-the next 3 bytes. If the hash chain for this index is not empty, all
-strings in the chain are compared with the current input string, and
-the longest match is selected.
-
-The hash chains are searched starting with the most recent strings, to
-favor small distances and thus take advantage of the Huffman encoding.
-The hash chains are singly linked. There are no deletions from the
-hash chains, the algorithm simply discards matches that are too old.
-
-To avoid a worst-case situation, very long hash chains are arbitrarily
-truncated at a certain length, determined by a runtime option (level
-parameter of deflateInit). So deflate() does not always find the longest
-possible match but generally finds a match which is long enough.
-
-deflate() also defers the selection of matches with a lazy evaluation
-mechanism. After a match of length N has been found, deflate() searches for
-a longer match at the next input byte. If a longer match is found, the
-previous match is truncated to a length of one (thus producing a single
-literal byte) and the process of lazy evaluation begins again. Otherwise,
-the original match is kept, and the next match search is attempted only N
-steps later.
-
-The lazy match evaluation is also subject to a runtime parameter. If
-the current match is long enough, deflate() reduces the search for a longer
-match, thus speeding up the whole process. If compression ratio is more
-important than speed, deflate() attempts a complete second search even if
-the first match is already long enough.
-
-The lazy match evaluation is not performed for the fastest compression
-modes (level parameter 1 to 3). For these fast modes, new strings
-are inserted in the hash table only when no match was found, or
-when the match is not too long. This degrades the compression ratio
-but saves time since there are both fewer insertions and fewer searches.
-
-
-2. Decompression algorithm (inflate)
-
-2.1 Introduction
-
-The key question is how to represent a Huffman code (or any prefix code) so
-that you can decode fast.  The most important characteristic is that shorter
-codes are much more common than longer codes, so pay attention to decoding the
-short codes fast, and let the long codes take longer to decode.
-
-inflate() sets up a first level table that covers some number of bits of
-input less than the length of longest code.  It gets that many bits from the
-stream, and looks it up in the table.  The table will tell if the next
-code is that many bits or less and how many, and if it is, it will tell
-the value, else it will point to the next level table for which inflate()
-grabs more bits and tries to decode a longer code.
-
-How many bits to make the first lookup is a tradeoff between the time it
-takes to decode and the time it takes to build the table.  If building the
-table took no time (and if you had infinite memory), then there would only
-be a first level table to cover all the way to the longest code.  However,
-building the table ends up taking a lot longer for more bits since short
-codes are replicated many times in such a table.  What inflate() does is
-simply to make the number of bits in the first table a variable, and  then
-to set that variable for the maximum speed.
-
-For inflate, which has 286 possible codes for the literal/length tree, the size
-of the first table is nine bits.  Also the distance trees have 30 possible
-values, and the size of the first table is six bits.  Note that for each of
-those cases, the table ended up one bit longer than the ``average'' code
-length, i.e. the code length of an approximately flat code which would be a
-little more than eight bits for 286 symbols and a little less than five bits
-for 30 symbols.
-
-
-2.2 More details on the inflate table lookup
-
-Ok, you want to know what this cleverly obfuscated inflate tree actually
-looks like.  You are correct that it's not a Huffman tree.  It is simply a
-lookup table for the first, let's say, nine bits of a Huffman symbol.  The
-symbol could be as short as one bit or as long as 15 bits.  If a particular
-symbol is shorter than nine bits, then that symbol's translation is duplicated
-in all those entries that start with that symbol's bits.  For example, if the
-symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a
-symbol is nine bits long, it appears in the table once.
-
-If the symbol is longer than nine bits, then that entry in the table points
-to another similar table for the remaining bits.  Again, there are duplicated
-entries as needed.  The idea is that most of the time the symbol will be short
-and there will only be one table look up.  (That's whole idea behind data
-compression in the first place.)  For the less frequent long symbols, there
-will be two lookups.  If you had a compression method with really long
-symbols, you could have as many levels of lookups as is efficient.  For
-inflate, two is enough.
-
-So a table entry either points to another table (in which case nine bits in
-the above example are gobbled), or it contains the translation for the symbol
-and the number of bits to gobble.  Then you start again with the next
-ungobbled bit.
-
-You may wonder: why not just have one lookup table for how ever many bits the
-longest symbol is?  The reason is that if you do that, you end up spending
-more time filling in duplicate symbol entries than you do actually decoding.
-At least for deflate's output that generates new trees every several 10's of
-kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code
-would take too long if you're only decoding several thousand symbols.  At the
-other extreme, you could make a new table for every bit in the code.  In fact,
-that's essentially a Huffman tree.  But then you spend too much time
-traversing the tree while decoding, even for short symbols.
-
-So the number of bits for the first lookup table is a trade of the time to
-fill out the table vs. the time spent looking at the second level and above of
-the table.
-
-Here is an example, scaled down:
-
-The code being decoded, with 10 symbols, from 1 to 6 bits long:
-
-A: 0
-B: 10
-C: 1100
-D: 11010
-E: 11011
-F: 11100
-G: 11101
-H: 11110
-I: 111110
-J: 111111
-
-Let's make the first table three bits long (eight entries):
-
-000: A,1
-001: A,1
-010: A,1
-011: A,1
-100: B,2
-101: B,2
-110: -> table X (gobble 3 bits)
-111: -> table Y (gobble 3 bits)
-
-Each entry is what the bits decode as and how many bits that is, i.e. how
-many bits to gobble.  Or the entry points to another table, with the number of
-bits to gobble implicit in the size of the table.
-
-Table X is two bits long since the longest code starting with 110 is five bits
-long:
-
-00: C,1
-01: C,1
-10: D,2
-11: E,2
-
-Table Y is three bits long since the longest code starting with 111 is six
-bits long:
-
-000: F,2
-001: F,2
-010: G,2
-011: G,2
-100: H,2
-101: H,2
-110: I,3
-111: J,3
-
-So what we have here are three tables with a total of 20 entries that had to
-be constructed.  That's compared to 64 entries for a single table.  Or
-compared to 16 entries for a Huffman tree (six two entry tables and one four
-entry table).  Assuming that the code ideally represents the probability of
-the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
-to one lookup for the single table, or 1.66 lookups per symbol for the
-Huffman tree.
-
-There, I think that gives you a picture of what's going on.  For inflate, the
-meaning of a particular symbol is often more than just a letter.  It can be a
-byte (a "literal"), or it can be either a length or a distance which
-indicates a base value and a number of bits to fetch after the code that is
-added to the base value.  Or it might be the special end-of-block code.  The
-data structures created in inftrees.c try to encode all that information
-compactly in the tables.
-
-
-Jean-loup Gailly        Mark Adler
-jloup@gzip.org          madler@alumni.caltech.edu
-
-
-References:
-
-[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
-Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
-pp. 337-343.
-
-``DEFLATE Compressed Data Format Specification'' available in
-http://tools.ietf.org/html/rfc1951
diff --git a/Modules/zlib/compress.c b/Modules/zlib/compress.c
deleted file mode 100644
index e2db404..0000000
--- a/Modules/zlib/compress.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* compress.c -- compress a memory buffer
- * Copyright (C) 1995-2005, 2014, 2016 Jean-loup Gailly, Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#define ZLIB_INTERNAL
-#include "zlib.h"
-
-/* ===========================================================================
-     Compresses the source buffer into the destination buffer. The level
-   parameter has the same meaning as in deflateInit.  sourceLen is the byte
-   length of the source buffer. Upon entry, destLen is the total size of the
-   destination buffer, which must be at least 0.1% larger than sourceLen plus
-   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
-
-     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
-   Z_STREAM_ERROR if the level parameter is invalid.
-*/
-int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-    int level;
-{
-    z_stream stream;
-    int err;
-    const uInt max = (uInt)-1;
-    uLong left;
-
-    left = *destLen;
-    *destLen = 0;
-
-    stream.zalloc = (alloc_func)0;
-    stream.zfree = (free_func)0;
-    stream.opaque = (voidpf)0;
-
-    err = deflateInit(&stream, level);
-    if (err != Z_OK) return err;
-
-    stream.next_out = dest;
-    stream.avail_out = 0;
-    stream.next_in = (z_const Bytef *)source;
-    stream.avail_in = 0;
-
-    do {
-        if (stream.avail_out == 0) {
-            stream.avail_out = left > (uLong)max ? max : (uInt)left;
-            left -= stream.avail_out;
-        }
-        if (stream.avail_in == 0) {
-            stream.avail_in = sourceLen > (uLong)max ? max : (uInt)sourceLen;
-            sourceLen -= stream.avail_in;
-        }
-        err = deflate(&stream, sourceLen ? Z_NO_FLUSH : Z_FINISH);
-    } while (err == Z_OK);
-
-    *destLen = stream.total_out;
-    deflateEnd(&stream);
-    return err == Z_STREAM_END ? Z_OK : err;
-}
-
-/* ===========================================================================
- */
-int ZEXPORT compress (dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-{
-    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
-}
-
-/* ===========================================================================
-     If the default memLevel or windowBits for deflateInit() is changed, then
-   this function needs to be updated.
- */
-uLong ZEXPORT compressBound (sourceLen)
-    uLong sourceLen;
-{
-    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
-           (sourceLen >> 25) + 13;
-}
diff --git a/Modules/zlib/configure b/Modules/zlib/configure
deleted file mode 100755
index e974d1f..0000000
--- a/Modules/zlib/configure
+++ /dev/null
@@ -1,921 +0,0 @@
-#!/bin/sh
-# configure script for zlib.
-#
-# Normally configure builds both a static and a shared library.
-# If you want to build just a static library, use: ./configure --static
-#
-# To impose specific compiler or flags or install directory, use for example:
-#    prefix=$HOME CC=cc CFLAGS="-O4" ./configure
-# or for csh/tcsh users:
-#    (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
-
-# Incorrect settings of CC or CFLAGS may prevent creating a shared library.
-# If you have problems, try without defining CC and CFLAGS before reporting
-# an error.
-
-# start off configure.log
-echo -------------------- >> configure.log
-echo $0 $* >> configure.log
-date >> configure.log
-
-# get source directory
-SRCDIR=`dirname $0`
-if test $SRCDIR = "."; then
-    ZINC=""
-    ZINCOUT="-I."
-    SRCDIR=""
-else
-    ZINC='-include zconf.h'
-    ZINCOUT='-I. -I$(SRCDIR)'
-    SRCDIR="$SRCDIR/"
-fi
-
-# set command prefix for cross-compilation
-if [ -n "${CHOST}" ]; then
-    uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`"
-    CROSS_PREFIX="${CHOST}-"
-fi
-
-# destination name for static library
-STATICLIB=libz.a
-
-# extract zlib version numbers from zlib.h
-VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < ${SRCDIR}zlib.h`
-VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < ${SRCDIR}zlib.h`
-VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h`
-VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h`
-
-# establish commands for library building
-if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
-    AR=${AR-"${CROSS_PREFIX}ar"}
-    test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log
-else
-    AR=${AR-"ar"}
-    test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log
-fi
-ARFLAGS=${ARFLAGS-"rc"}
-if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then
-    RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
-    test -n "${CROSS_PREFIX}" && echo Using ${RANLIB} | tee -a configure.log
-else
-    RANLIB=${RANLIB-"ranlib"}
-fi
-if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
-    NM=${NM-"${CROSS_PREFIX}nm"}
-    test -n "${CROSS_PREFIX}" && echo Using ${NM} | tee -a configure.log
-else
-    NM=${NM-"nm"}
-fi
-
-# set defaults before processing command line options
-LDCONFIG=${LDCONFIG-"ldconfig"}
-LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
-ARCHS=
-prefix=${prefix-/usr/local}
-exec_prefix=${exec_prefix-'${prefix}'}
-libdir=${libdir-'${exec_prefix}/lib'}
-sharedlibdir=${sharedlibdir-'${libdir}'}
-includedir=${includedir-'${prefix}/include'}
-mandir=${mandir-'${prefix}/share/man'}
-shared_ext='.so'
-shared=1
-solo=0
-cover=0
-zprefix=0
-zconst=0
-build64=0
-gcc=0
-warn=0
-debug=0
-old_cc="$CC"
-old_cflags="$CFLAGS"
-OBJC='$(OBJZ) $(OBJG)'
-PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)'
-
-# leave this script, optionally in a bad way
-leave()
-{
-  if test "$*" != "0"; then
-    echo "** $0 aborting." | tee -a configure.log
-  fi
-  rm -f $test.[co] $test $test$shared_ext $test.gcno ./--version
-  echo -------------------- >> configure.log
-  echo >> configure.log
-  echo >> configure.log
-  exit $1
-}
-
-# process command line options
-while test $# -ge 1
-do
-case "$1" in
-    -h* | --help)
-      echo 'usage:' | tee -a configure.log
-      echo '  configure [--const] [--zprefix] [--prefix=PREFIX]  [--eprefix=EXPREFIX]' | tee -a configure.log
-      echo '    [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]' | tee -a configure.log
-      echo '    [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]' | tee -a configure.log
-        exit 0 ;;
-    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
-    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
-    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;;
-    --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;;
-    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;;
-    -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;;
-    -p* | --prefix) prefix="$2"; shift; shift ;;
-    -e* | --eprefix) exec_prefix="$2"; shift; shift ;;
-    -l* | --libdir) libdir="$2"; shift; shift ;;
-    -i* | --includedir) includedir="$2"; shift; shift ;;
-    -s* | --shared | --enable-shared) shared=1; shift ;;
-    -t | --static) shared=0; shift ;;
-    --solo) solo=1; shift ;;
-    --cover) cover=1; shift ;;
-    -z* | --zprefix) zprefix=1; shift ;;
-    -6* | --64) build64=1; shift ;;
-    -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;;
-    --sysconfdir=*) echo "ignored option: --sysconfdir" | tee -a configure.log; shift ;;
-    --localstatedir=*) echo "ignored option: --localstatedir" | tee -a configure.log; shift ;;
-    -c* | --const) zconst=1; shift ;;
-    -w* | --warn) warn=1; shift ;;
-    -d* | --debug) debug=1; shift ;;
-    *)
-      echo "unknown option: $1" | tee -a configure.log
-      echo "$0 --help for help" | tee -a configure.log
-      leave 1;;
-    esac
-done
-
-# temporary file name
-test=ztest$$
-
-# put arguments in log, also put test file in log if used in arguments
-show()
-{
-  case "$*" in
-    *$test.c*)
-      echo === $test.c === >> configure.log
-      cat $test.c >> configure.log
-      echo === >> configure.log;;
-  esac
-  echo $* >> configure.log
-}
-
-# check for gcc vs. cc and set compile and link flags based on the system identified by uname
-cat > $test.c <<EOF
-extern int getchar();
-int hello() {return getchar();}
-EOF
-
-test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc... | tee -a configure.log
-cc=${CC-${CROSS_PREFIX}gcc}
-cflags=${CFLAGS-"-O3"}
-# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
-case "$cc" in
-  *gcc*) gcc=1 ;;
-  *clang*) gcc=1 ;;
-esac
-case `$cc -v 2>&1` in
-  *gcc*) gcc=1 ;;
-  *clang*) gcc=1 ;;
-esac
-
-show $cc -c $test.c
-if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then
-  echo ... using gcc >> configure.log
-  CC="$cc"
-  CFLAGS="${CFLAGS--O3}"
-  SFLAGS="${CFLAGS--O3} -fPIC"
-  if test "$ARCHS"; then
-    CFLAGS="${CFLAGS} ${ARCHS}"
-    LDFLAGS="${LDFLAGS} ${ARCHS}"
-  fi
-  if test $build64 -eq 1; then
-    CFLAGS="${CFLAGS} -m64"
-    SFLAGS="${SFLAGS} -m64"
-  fi
-  if test "$warn" -eq 1; then
-    if test "$zconst" -eq 1; then
-      CFLAGS="${CFLAGS} -Wall -Wextra -Wcast-qual -pedantic -DZLIB_CONST"
-    else
-      CFLAGS="${CFLAGS} -Wall -Wextra -pedantic"
-    fi
-  fi
-  if test $debug -eq 1; then
-    CFLAGS="${CFLAGS} -DZLIB_DEBUG"
-    SFLAGS="${SFLAGS} -DZLIB_DEBUG"
-  fi
-  if test -z "$uname"; then
-    uname=`(uname -s || echo unknown) 2>/dev/null`
-  fi
-  case "$uname" in
-  Linux* | linux* | GNU | GNU/* | solaris*)
-        LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,${SRCDIR}zlib.map"} ;;
-  *BSD | *bsd* | DragonFly)
-        LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,${SRCDIR}zlib.map"}
-        LDCONFIG="ldconfig -m" ;;
-  CYGWIN* | Cygwin* | cygwin* | OS/2*)
-        EXE='.exe' ;;
-  MINGW* | mingw*)
-# temporary bypass
-        rm -f $test.[co] $test $test$shared_ext
-        echo "Please use win32/Makefile.gcc instead." | tee -a configure.log
-        leave 1
-        LDSHARED=${LDSHARED-"$cc -shared"}
-        LDSHAREDLIBC=""
-        EXE='.exe' ;;
-  QNX*)  # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
-         # (alain.bonnefoy@icbt.com)
-                 LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;;
-  HP-UX*)
-         LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
-         case `(uname -m || echo unknown) 2>/dev/null` in
-         ia64)
-                 shared_ext='.so'
-                 SHAREDLIB='libz.so' ;;
-         *)
-                 shared_ext='.sl'
-                 SHAREDLIB='libz.sl' ;;
-         esac ;;
-  Darwin* | darwin*)
-             shared_ext='.dylib'
-             SHAREDLIB=libz$shared_ext
-             SHAREDLIBV=libz.$VER$shared_ext
-             SHAREDLIBM=libz.$VER1$shared_ext
-             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
-             if libtool -V 2>&1 | grep Apple > /dev/null; then
-                 AR="libtool"
-             else
-                 AR="/usr/bin/libtool"
-             fi
-             ARFLAGS="-o" ;;
-  *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
-  esac
-else
-  # find system name and corresponding cc options
-  CC=${CC-cc}
-  gcc=0
-  echo ... using $CC >> configure.log
-  if test -z "$uname"; then
-    uname=`(uname -sr || echo unknown) 2>/dev/null`
-  fi
-  case "$uname" in
-  HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
-             CFLAGS=${CFLAGS-"-O"}
-#            LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
-             LDSHARED=${LDSHARED-"ld -b"}
-         case `(uname -m || echo unknown) 2>/dev/null` in
-         ia64)
-             shared_ext='.so'
-             SHAREDLIB='libz.so' ;;
-         *)
-             shared_ext='.sl'
-             SHAREDLIB='libz.sl' ;;
-         esac ;;
-  IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
-             CFLAGS=${CFLAGS-"-ansi -O2"}
-             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
-  OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
-             CFLAGS=${CFLAGS-"-O -std1"}
-             LDFLAGS="${LDFLAGS} -Wl,-rpath,."
-             LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"} ;;
-  OSF1*)     SFLAGS=${CFLAGS-"-O -std1"}
-             CFLAGS=${CFLAGS-"-O -std1"}
-             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
-  QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
-             CFLAGS=${CFLAGS-"-4 -O"}
-             LDSHARED=${LDSHARED-"cc"}
-             RANLIB=${RANLIB-"true"}
-             AR="cc"
-             ARFLAGS="-A" ;;
-  SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
-             CFLAGS=${CFLAGS-"-O3"}
-             LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
-  SunOS\ 5* | solaris*)
-         LDSHARED=${LDSHARED-"cc -G -h libz$shared_ext.$VER1"}
-         SFLAGS=${CFLAGS-"-fast -KPIC"}
-         CFLAGS=${CFLAGS-"-fast"}
-         if test $build64 -eq 1; then
-             # old versions of SunPRO/Workshop/Studio don't support -m64,
-             # but newer ones do.  Check for it.
-             flag64=`$CC -flags | egrep -- '^-m64'`
-             if test x"$flag64" != x"" ; then
-                 CFLAGS="${CFLAGS} -m64"
-                 SFLAGS="${SFLAGS} -m64"
-             else
-                 case `(uname -m || echo unknown) 2>/dev/null` in
-                   i86*)
-                     SFLAGS="$SFLAGS -xarch=amd64"
-                     CFLAGS="$CFLAGS -xarch=amd64" ;;
-                   *)
-                     SFLAGS="$SFLAGS -xarch=v9"
-                     CFLAGS="$CFLAGS -xarch=v9" ;;
-                 esac
-             fi
-         fi
-         if test -n "$ZINC"; then
-             ZINC='-I- -I. -I$(SRCDIR)'
-         fi
-         ;;
-  SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
-             CFLAGS=${CFLAGS-"-O2"}
-             LDSHARED=${LDSHARED-"ld"} ;;
-  SunStudio\ 9*) SFLAGS=${CFLAGS-"-fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"}
-             CFLAGS=${CFLAGS-"-fast -xtarget=ultra3 -xarch=v9b"}
-             LDSHARED=${LDSHARED-"cc -xarch=v9b"} ;;
-  UNIX_System_V\ 4.2.0)
-             SFLAGS=${CFLAGS-"-KPIC -O"}
-             CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -G"} ;;
-  UNIX_SV\ 4.2MP)
-             SFLAGS=${CFLAGS-"-Kconform_pic -O"}
-             CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -G"} ;;
-  OpenUNIX\ 5)
-             SFLAGS=${CFLAGS-"-KPIC -O"}
-             CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -G"} ;;
-  AIX*)  # Courtesy of dbakker@arrayasolutions.com
-             SFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
-             CFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
-             LDSHARED=${LDSHARED-"xlc -G"} ;;
-  # send working options for other systems to zlib@gzip.org
-  *)         SFLAGS=${CFLAGS-"-O"}
-             CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -shared"} ;;
-  esac
-fi
-
-# destination names for shared library if not defined above
-SHAREDLIB=${SHAREDLIB-"libz$shared_ext"}
-SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"}
-SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"}
-
-echo >> configure.log
-
-# define functions for testing compiler and library characteristics and logging the results
-
-cat > $test.c <<EOF
-#error error
-EOF
-if ($CC -c $CFLAGS $test.c) 2>/dev/null; then
-  try()
-  {
-    show $*
-    test "`( $* ) 2>&1 | tee -a configure.log`" = ""
-  }
-  echo - using any output from compiler to indicate an error >> configure.log
-else
-  try()
-  {
-    show $*
-    ( $* ) >> configure.log 2>&1
-    ret=$?
-    if test $ret -ne 0; then
-      echo "(exit code "$ret")" >> configure.log
-    fi
-    return $ret
-  }
-fi
-
-tryboth()
-{
-  show $*
-  got=`( $* ) 2>&1`
-  ret=$?
-  printf %s "$got" >> configure.log
-  if test $ret -ne 0; then
-    return $ret
-  fi
-  test "$got" = ""
-}
-
-cat > $test.c << EOF
-int foo() { return 0; }
-EOF
-echo "Checking for obsessive-compulsive compiler options..." >> configure.log
-if try $CC -c $CFLAGS $test.c; then
-  :
-else
-  echo "Compiler error reporting is too harsh for $0 (perhaps remove -Werror)." | tee -a configure.log
-  leave 1
-fi
-
-echo >> configure.log
-
-# see if shared library build supported
-cat > $test.c <<EOF
-extern int getchar();
-int hello() {return getchar();}
-EOF
-if test $shared -eq 1; then
-  echo Checking for shared library support... | tee -a configure.log
-  # we must test in two steps (cc then ld), required at least on SunOS 4.x
-  if try $CC -w -c $SFLAGS $test.c &&
-     try $LDSHARED $SFLAGS -o $test$shared_ext $test.o; then
-    echo Building shared library $SHAREDLIBV with $CC. | tee -a configure.log
-  elif test -z "$old_cc" -a -z "$old_cflags"; then
-    echo No shared library support. | tee -a configure.log
-    shared=0;
-  else
-    echo 'No shared library support; try without defining CC and CFLAGS' | tee -a configure.log
-    shared=0;
-  fi
-fi
-if test $shared -eq 0; then
-  LDSHARED="$CC"
-  ALL="static"
-  TEST="all teststatic"
-  SHAREDLIB=""
-  SHAREDLIBV=""
-  SHAREDLIBM=""
-  echo Building static library $STATICLIB version $VER with $CC. | tee -a configure.log
-else
-  ALL="static shared"
-  TEST="all teststatic testshared"
-fi
-
-# check for underscores in external names for use by assembler code
-CPP=${CPP-"$CC -E"}
-case $CFLAGS in
-  *ASMV*)
-    echo >> configure.log
-    show "$NM $test.o | grep _hello"
-    if test "`$NM $test.o | grep _hello | tee -a configure.log`" = ""; then
-      CPP="$CPP -DNO_UNDERLINE"
-      echo Checking for underline in external names... No. | tee -a configure.log
-    else
-      echo Checking for underline in external names... Yes. | tee -a configure.log
-    fi ;;
-esac
-
-echo >> configure.log
-
-# check for size_t
-cat > $test.c <<EOF
-#include <stdio.h>
-#include <stdlib.h>
-size_t dummy = 0;
-EOF
-if try $CC -c $CFLAGS $test.c; then
-  echo "Checking for size_t... Yes." | tee -a configure.log
-  need_sizet=0
-else
-  echo "Checking for size_t... No." | tee -a configure.log
-  need_sizet=1
-fi
-
-echo >> configure.log
-
-# find the size_t integer type, if needed
-if test $need_sizet -eq 1; then
-  cat > $test.c <<EOF
-long long dummy = 0;
-EOF
-  if try $CC -c $CFLAGS $test.c; then
-    echo "Checking for long long... Yes." | tee -a configure.log
-    cat > $test.c <<EOF
-#include <stdio.h>
-int main(void) {
-    if (sizeof(void *) <= sizeof(int)) puts("int");
-    else if (sizeof(void *) <= sizeof(long)) puts("long");
-    else puts("z_longlong");
-    return 0;
-}
-EOF
-  else
-    echo "Checking for long long... No." | tee -a configure.log
-    cat > $test.c <<EOF
-#include <stdio.h>
-int main(void) {
-    if (sizeof(void *) <= sizeof(int)) puts("int");
-    else puts("long");
-    return 0;
-}
-EOF
-  fi
-  if try $CC $CFLAGS -o $test $test.c; then
-    sizet=`./$test`
-    echo "Checking for a pointer-size integer type..." $sizet"." | tee -a configure.log
-  else
-    echo "Failed to find a pointer-size integer type." | tee -a configure.log
-    leave 1
-  fi
-fi
-
-if test $need_sizet -eq 1; then
-  CFLAGS="${CFLAGS} -DNO_SIZE_T=${sizet}"
-  SFLAGS="${SFLAGS} -DNO_SIZE_T=${sizet}"
-fi
-
-echo >> configure.log
-
-# check for large file support, and if none, check for fseeko()
-cat > $test.c <<EOF
-#include <sys/types.h>
-off64_t dummy = 0;
-EOF
-if try $CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c; then
-  CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1"
-  SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1"
-  ALL="${ALL} all64"
-  TEST="${TEST} test64"
-  echo "Checking for off64_t... Yes." | tee -a configure.log
-  echo "Checking for fseeko... Yes." | tee -a configure.log
-else
-  echo "Checking for off64_t... No." | tee -a configure.log
-  echo >> configure.log
-  cat > $test.c <<EOF
-#include <stdio.h>
-int main(void) {
-  fseeko(NULL, 0, 0);
-  return 0;
-}
-EOF
-  if try $CC $CFLAGS -o $test $test.c; then
-    echo "Checking for fseeko... Yes." | tee -a configure.log
-  else
-    CFLAGS="${CFLAGS} -DNO_FSEEKO"
-    SFLAGS="${SFLAGS} -DNO_FSEEKO"
-    echo "Checking for fseeko... No." | tee -a configure.log
-  fi
-fi
-
-echo >> configure.log
-
-# check for strerror() for use by gz* functions
-cat > $test.c <<EOF
-#include <string.h>
-#include <errno.h>
-int main() { return strlen(strerror(errno)); }
-EOF
-if try $CC $CFLAGS -o $test $test.c; then
-  echo "Checking for strerror... Yes." | tee -a configure.log
-else
-  CFLAGS="${CFLAGS} -DNO_STRERROR"
-  SFLAGS="${SFLAGS} -DNO_STRERROR"
-  echo "Checking for strerror... No." | tee -a configure.log
-fi
-
-# copy clean zconf.h for subsequent edits
-cp -p ${SRCDIR}zconf.h.in zconf.h
-
-echo >> configure.log
-
-# check for unistd.h and save result in zconf.h
-cat > $test.c <<EOF
-#include <unistd.h>
-int main() { return 0; }
-EOF
-if try $CC -c $CFLAGS $test.c; then
-  sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
-  mv zconf.temp.h zconf.h
-  echo "Checking for unistd.h... Yes." | tee -a configure.log
-else
-  echo "Checking for unistd.h... No." | tee -a configure.log
-fi
-
-echo >> configure.log
-
-# check for stdarg.h and save result in zconf.h
-cat > $test.c <<EOF
-#include <stdarg.h>
-int main() { return 0; }
-EOF
-if try $CC -c $CFLAGS $test.c; then
-  sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
-  mv zconf.temp.h zconf.h
-  echo "Checking for stdarg.h... Yes." | tee -a configure.log
-else
-  echo "Checking for stdarg.h... No." | tee -a configure.log
-fi
-
-# if the z_ prefix was requested, save that in zconf.h
-if test $zprefix -eq 1; then
-  sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
-  mv zconf.temp.h zconf.h
-  echo >> configure.log
-  echo "Using z_ prefix on all symbols." | tee -a configure.log
-fi
-
-# if --solo compilation was requested, save that in zconf.h and remove gz stuff from object lists
-if test $solo -eq 1; then
-  sed '/#define ZCONF_H/a\
-#define Z_SOLO
-
-' < zconf.h > zconf.temp.h
-  mv zconf.temp.h zconf.h
-OBJC='$(OBJZ)'
-PIC_OBJC='$(PIC_OBJZ)'
-fi
-
-# if code coverage testing was requested, use older gcc if defined, e.g. "gcc-4.2" on Mac OS X
-if test $cover -eq 1; then
-  CFLAGS="${CFLAGS} -fprofile-arcs -ftest-coverage"
-  if test -n "$GCC_CLASSIC"; then
-    CC=$GCC_CLASSIC
-  fi
-fi
-
-echo >> configure.log
-
-# conduct a series of tests to resolve eight possible cases of using "vs" or "s" printf functions
-# (using stdarg or not), with or without "n" (proving size of buffer), and with or without a
-# return value.  The most secure result is vsnprintf() with a return value.  snprintf() with a
-# return value is secure as well, but then gzprintf() will be limited to 20 arguments.
-cat > $test.c <<EOF
-#include <stdio.h>
-#include <stdarg.h>
-#include "zconf.h"
-int main()
-{
-#ifndef STDC
-  choke me
-#endif
-  return 0;
-}
-EOF
-if try $CC -c $CFLAGS $test.c; then
-  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()." | tee -a configure.log
-
-  echo >> configure.log
-  cat > $test.c <<EOF
-#include <stdio.h>
-#include <stdarg.h>
-int mytest(const char *fmt, ...)
-{
-  char buf[20];
-  va_list ap;
-  va_start(ap, fmt);
-  vsnprintf(buf, sizeof(buf), fmt, ap);
-  va_end(ap);
-  return 0;
-}
-int main()
-{
-  return (mytest("Hello%d\n", 1));
-}
-EOF
-  if try $CC $CFLAGS -o $test $test.c; then
-    echo "Checking for vsnprintf() in stdio.h... Yes." | tee -a configure.log
-
-    echo >> configure.log
-    cat >$test.c <<EOF
-#include <stdio.h>
-#include <stdarg.h>
-int mytest(const char *fmt, ...)
-{
-  int n;
-  char buf[20];
-  va_list ap;
-  va_start(ap, fmt);
-  n = vsnprintf(buf, sizeof(buf), fmt, ap);
-  va_end(ap);
-  return n;
-}
-int main()
-{
-  return (mytest("Hello%d\n", 1));
-}
-EOF
-
-    if try $CC -c $CFLAGS $test.c; then
-      echo "Checking for return value of vsnprintf()... Yes." | tee -a configure.log
-    else
-      CFLAGS="$CFLAGS -DHAS_vsnprintf_void"
-      SFLAGS="$SFLAGS -DHAS_vsnprintf_void"
-      echo "Checking for return value of vsnprintf()... No." | tee -a configure.log
-      echo "  WARNING: apparently vsnprintf() does not return a value. zlib" | tee -a configure.log
-      echo "  can build but will be open to possible string-format security" | tee -a configure.log
-      echo "  vulnerabilities." | tee -a configure.log
-    fi
-  else
-    CFLAGS="$CFLAGS -DNO_vsnprintf"
-    SFLAGS="$SFLAGS -DNO_vsnprintf"
-    echo "Checking for vsnprintf() in stdio.h... No." | tee -a configure.log
-    echo "  WARNING: vsnprintf() not found, falling back to vsprintf(). zlib" | tee -a configure.log
-    echo "  can build but will be open to possible buffer-overflow security" | tee -a configure.log
-    echo "  vulnerabilities." | tee -a configure.log
-
-    echo >> configure.log
-    cat >$test.c <<EOF
-#include <stdio.h>
-#include <stdarg.h>
-int mytest(const char *fmt, ...)
-{
-  int n;
-  char buf[20];
-  va_list ap;
-  va_start(ap, fmt);
-  n = vsprintf(buf, fmt, ap);
-  va_end(ap);
-  return n;
-}
-int main()
-{
-  return (mytest("Hello%d\n", 1));
-}
-EOF
-
-    if try $CC -c $CFLAGS $test.c; then
-      echo "Checking for return value of vsprintf()... Yes." | tee -a configure.log
-    else
-      CFLAGS="$CFLAGS -DHAS_vsprintf_void"
-      SFLAGS="$SFLAGS -DHAS_vsprintf_void"
-      echo "Checking for return value of vsprintf()... No." | tee -a configure.log
-      echo "  WARNING: apparently vsprintf() does not return a value. zlib" | tee -a configure.log
-      echo "  can build but will be open to possible string-format security" | tee -a configure.log
-      echo "  vulnerabilities." | tee -a configure.log
-    fi
-  fi
-else
-  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()." | tee -a configure.log
-
-  echo >> configure.log
-  cat >$test.c <<EOF
-#include <stdio.h>
-int mytest()
-{
-  char buf[20];
-  snprintf(buf, sizeof(buf), "%s", "foo");
-  return 0;
-}
-int main()
-{
-  return (mytest());
-}
-EOF
-
-  if try $CC $CFLAGS -o $test $test.c; then
-    echo "Checking for snprintf() in stdio.h... Yes." | tee -a configure.log
-
-    echo >> configure.log
-    cat >$test.c <<EOF
-#include <stdio.h>
-int mytest()
-{
-  char buf[20];
-  return snprintf(buf, sizeof(buf), "%s", "foo");
-}
-int main()
-{
-  return (mytest());
-}
-EOF
-
-    if try $CC -c $CFLAGS $test.c; then
-      echo "Checking for return value of snprintf()... Yes." | tee -a configure.log
-    else
-      CFLAGS="$CFLAGS -DHAS_snprintf_void"
-      SFLAGS="$SFLAGS -DHAS_snprintf_void"
-      echo "Checking for return value of snprintf()... No." | tee -a configure.log
-      echo "  WARNING: apparently snprintf() does not return a value. zlib" | tee -a configure.log
-      echo "  can build but will be open to possible string-format security" | tee -a configure.log
-      echo "  vulnerabilities." | tee -a configure.log
-    fi
-  else
-    CFLAGS="$CFLAGS -DNO_snprintf"
-    SFLAGS="$SFLAGS -DNO_snprintf"
-    echo "Checking for snprintf() in stdio.h... No." | tee -a configure.log
-    echo "  WARNING: snprintf() not found, falling back to sprintf(). zlib" | tee -a configure.log
-    echo "  can build but will be open to possible buffer-overflow security" | tee -a configure.log
-    echo "  vulnerabilities." | tee -a configure.log
-
-    echo >> configure.log
-    cat >$test.c <<EOF
-#include <stdio.h>
-int mytest()
-{
-  char buf[20];
-  return sprintf(buf, "%s", "foo");
-}
-int main()
-{
-  return (mytest());
-}
-EOF
-
-    if try $CC -c $CFLAGS $test.c; then
-      echo "Checking for return value of sprintf()... Yes." | tee -a configure.log
-    else
-      CFLAGS="$CFLAGS -DHAS_sprintf_void"
-      SFLAGS="$SFLAGS -DHAS_sprintf_void"
-      echo "Checking for return value of sprintf()... No." | tee -a configure.log
-      echo "  WARNING: apparently sprintf() does not return a value. zlib" | tee -a configure.log
-      echo "  can build but will be open to possible string-format security" | tee -a configure.log
-      echo "  vulnerabilities." | tee -a configure.log
-    fi
-  fi
-fi
-
-# see if we can hide zlib internal symbols that are linked between separate source files
-if test "$gcc" -eq 1; then
-  echo >> configure.log
-  cat > $test.c <<EOF
-#define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-int ZLIB_INTERNAL foo;
-int main()
-{
-  return 0;
-}
-EOF
-  if tryboth $CC -c $CFLAGS $test.c; then
-    CFLAGS="$CFLAGS -DHAVE_HIDDEN"
-    SFLAGS="$SFLAGS -DHAVE_HIDDEN"
-    echo "Checking for attribute(visibility) support... Yes." | tee -a configure.log
-  else
-    echo "Checking for attribute(visibility) support... No." | tee -a configure.log
-  fi
-fi
-
-# show the results in the log
-echo >> configure.log
-echo ALL = $ALL >> configure.log
-echo AR = $AR >> configure.log
-echo ARFLAGS = $ARFLAGS >> configure.log
-echo CC = $CC >> configure.log
-echo CFLAGS = $CFLAGS >> configure.log
-echo CPP = $CPP >> configure.log
-echo EXE = $EXE >> configure.log
-echo LDCONFIG = $LDCONFIG >> configure.log
-echo LDFLAGS = $LDFLAGS >> configure.log
-echo LDSHARED = $LDSHARED >> configure.log
-echo LDSHAREDLIBC = $LDSHAREDLIBC >> configure.log
-echo OBJC = $OBJC >> configure.log
-echo PIC_OBJC = $PIC_OBJC >> configure.log
-echo RANLIB = $RANLIB >> configure.log
-echo SFLAGS = $SFLAGS >> configure.log
-echo SHAREDLIB = $SHAREDLIB >> configure.log
-echo SHAREDLIBM = $SHAREDLIBM >> configure.log
-echo SHAREDLIBV = $SHAREDLIBV >> configure.log
-echo STATICLIB = $STATICLIB >> configure.log
-echo TEST = $TEST >> configure.log
-echo VER = $VER >> configure.log
-echo Z_U4 = $Z_U4 >> configure.log
-echo SRCDIR = $SRCDIR >> configure.log
-echo exec_prefix = $exec_prefix >> configure.log
-echo includedir = $includedir >> configure.log
-echo libdir = $libdir >> configure.log
-echo mandir = $mandir >> configure.log
-echo prefix = $prefix >> configure.log
-echo sharedlibdir = $sharedlibdir >> configure.log
-echo uname = $uname >> configure.log
-
-# udpate Makefile with the configure results
-sed < ${SRCDIR}Makefile.in "
-/^CC *=/s#=.*#=$CC#
-/^CFLAGS *=/s#=.*#=$CFLAGS#
-/^SFLAGS *=/s#=.*#=$SFLAGS#
-/^LDFLAGS *=/s#=.*#=$LDFLAGS#
-/^LDSHARED *=/s#=.*#=$LDSHARED#
-/^CPP *=/s#=.*#=$CPP#
-/^STATICLIB *=/s#=.*#=$STATICLIB#
-/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
-/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
-/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
-/^AR *=/s#=.*#=$AR#
-/^ARFLAGS *=/s#=.*#=$ARFLAGS#
-/^RANLIB *=/s#=.*#=$RANLIB#
-/^LDCONFIG *=/s#=.*#=$LDCONFIG#
-/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC#
-/^EXE *=/s#=.*#=$EXE#
-/^SRCDIR *=/s#=.*#=$SRCDIR#
-/^ZINC *=/s#=.*#=$ZINC#
-/^ZINCOUT *=/s#=.*#=$ZINCOUT#
-/^prefix *=/s#=.*#=$prefix#
-/^exec_prefix *=/s#=.*#=$exec_prefix#
-/^libdir *=/s#=.*#=$libdir#
-/^sharedlibdir *=/s#=.*#=$sharedlibdir#
-/^includedir *=/s#=.*#=$includedir#
-/^mandir *=/s#=.*#=$mandir#
-/^OBJC *=/s#=.*#= $OBJC#
-/^PIC_OBJC *=/s#=.*#= $PIC_OBJC#
-/^all: */s#:.*#: $ALL#
-/^test: */s#:.*#: $TEST#
-" > Makefile
-
-# create zlib.pc with the configure results
-sed < ${SRCDIR}zlib.pc.in "
-/^CC *=/s#=.*#=$CC#
-/^CFLAGS *=/s#=.*#=$CFLAGS#
-/^CPP *=/s#=.*#=$CPP#
-/^LDSHARED *=/s#=.*#=$LDSHARED#
-/^STATICLIB *=/s#=.*#=$STATICLIB#
-/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
-/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
-/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
-/^AR *=/s#=.*#=$AR#
-/^ARFLAGS *=/s#=.*#=$ARFLAGS#
-/^RANLIB *=/s#=.*#=$RANLIB#
-/^EXE *=/s#=.*#=$EXE#
-/^prefix *=/s#=.*#=$prefix#
-/^exec_prefix *=/s#=.*#=$exec_prefix#
-/^libdir *=/s#=.*#=$libdir#
-/^sharedlibdir *=/s#=.*#=$sharedlibdir#
-/^includedir *=/s#=.*#=$includedir#
-/^mandir *=/s#=.*#=$mandir#
-/^LDFLAGS *=/s#=.*#=$LDFLAGS#
-" | sed -e "
-s/\@VERSION\@/$VER/g;
-" > zlib.pc
-
-# done
-leave 0
diff --git a/Modules/zlib/crc32.c b/Modules/zlib/crc32.c
deleted file mode 100644
index 9580440..0000000
--- a/Modules/zlib/crc32.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2006, 2010, 2011, 2012, 2016 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- *
- * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
- * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
- * tables for updating the shift register in one step with three exclusive-ors
- * instead of four steps with four exclusive-ors.  This results in about a
- * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
- */
-
-/* @(#) $Id$ */
-
-/*
-  Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
-  protection on the static variables used to control the first-use generation
-  of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
-  first call get_crc_table() to initialize the tables before allowing more than
-  one thread to use crc32().
-
-  DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
- */
-
-#ifdef MAKECRCH
-#  include <stdio.h>
-#  ifndef DYNAMIC_CRC_TABLE
-#    define DYNAMIC_CRC_TABLE
-#  endif /* !DYNAMIC_CRC_TABLE */
-#endif /* MAKECRCH */
-
-#include "zutil.h"      /* for STDC and FAR definitions */
-
-/* Definitions for doing the crc four data bytes at a time. */
-#if !defined(NOBYFOUR) && defined(Z_U4)
-#  define BYFOUR
-#endif
-#ifdef BYFOUR
-   local unsigned long crc32_little OF((unsigned long,
-                        const unsigned char FAR *, z_size_t));
-   local unsigned long crc32_big OF((unsigned long,
-                        const unsigned char FAR *, z_size_t));
-#  define TBLS 8
-#else
-#  define TBLS 1
-#endif /* BYFOUR */
-
-/* Local functions for crc concatenation */
-local unsigned long gf2_matrix_times OF((unsigned long *mat,
-                                         unsigned long vec));
-local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
-local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
-
-
-#ifdef DYNAMIC_CRC_TABLE
-
-local volatile int crc_table_empty = 1;
-local z_crc_t FAR crc_table[TBLS][256];
-local void make_crc_table OF((void));
-#ifdef MAKECRCH
-   local void write_table OF((FILE *, const z_crc_t FAR *));
-#endif /* MAKECRCH */
-/*
-  Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
-  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
-
-  Polynomials over GF(2) are represented in binary, one bit per coefficient,
-  with the lowest powers in the most significant bit.  Then adding polynomials
-  is just exclusive-or, and multiplying a polynomial by x is a right shift by
-  one.  If we call the above polynomial p, and represent a byte as the
-  polynomial q, also with the lowest power in the most significant bit (so the
-  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
-  where a mod b means the remainder after dividing a by b.
-
-  This calculation is done using the shift-register method of multiplying and
-  taking the remainder.  The register is initialized to zero, and for each
-  incoming bit, x^32 is added mod p to the register if the bit is a one (where
-  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
-  x (which is shifting right by one and adding x^32 mod p if the bit shifted
-  out is a one).  We start with the highest power (least significant bit) of
-  q and repeat for all eight bits of q.
-
-  The first table is simply the CRC of all possible eight bit values.  This is
-  all the information needed to generate CRCs on data a byte at a time for all
-  combinations of CRC register values and incoming bytes.  The remaining tables
-  allow for word-at-a-time CRC calculation for both big-endian and little-
-  endian machines, where a word is four bytes.
-*/
-local void make_crc_table()
-{
-    z_crc_t c;
-    int n, k;
-    z_crc_t poly;                       /* polynomial exclusive-or pattern */
-    /* terms of polynomial defining this crc (except x^32): */
-    static volatile int first = 1;      /* flag to limit concurrent making */
-    static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
-
-    /* See if another task is already doing this (not thread-safe, but better
-       than nothing -- significantly reduces duration of vulnerability in
-       case the advice about DYNAMIC_CRC_TABLE is ignored) */
-    if (first) {
-        first = 0;
-
-        /* make exclusive-or pattern from polynomial (0xedb88320UL) */
-        poly = 0;
-        for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
-            poly |= (z_crc_t)1 << (31 - p[n]);
-
-        /* generate a crc for every 8-bit value */
-        for (n = 0; n < 256; n++) {
-            c = (z_crc_t)n;
-            for (k = 0; k < 8; k++)
-                c = c & 1 ? poly ^ (c >> 1) : c >> 1;
-            crc_table[0][n] = c;
-        }
-
-#ifdef BYFOUR
-        /* generate crc for each value followed by one, two, and three zeros,
-           and then the byte reversal of those as well as the first table */
-        for (n = 0; n < 256; n++) {
-            c = crc_table[0][n];
-            crc_table[4][n] = ZSWAP32(c);
-            for (k = 1; k < 4; k++) {
-                c = crc_table[0][c & 0xff] ^ (c >> 8);
-                crc_table[k][n] = c;
-                crc_table[k + 4][n] = ZSWAP32(c);
-            }
-        }
-#endif /* BYFOUR */
-
-        crc_table_empty = 0;
-    }
-    else {      /* not first */
-        /* wait for the other guy to finish (not efficient, but rare) */
-        while (crc_table_empty)
-            ;
-    }
-
-#ifdef MAKECRCH
-    /* write out CRC tables to crc32.h */
-    {
-        FILE *out;
-
-        out = fopen("crc32.h", "w");
-        if (out == NULL) return;
-        fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
-        fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
-        fprintf(out, "local const z_crc_t FAR ");
-        fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
-        write_table(out, crc_table[0]);
-#  ifdef BYFOUR
-        fprintf(out, "#ifdef BYFOUR\n");
-        for (k = 1; k < 8; k++) {
-            fprintf(out, "  },\n  {\n");
-            write_table(out, crc_table[k]);
-        }
-        fprintf(out, "#endif\n");
-#  endif /* BYFOUR */
-        fprintf(out, "  }\n};\n");
-        fclose(out);
-    }
-#endif /* MAKECRCH */
-}
-
-#ifdef MAKECRCH
-local void write_table(out, table)
-    FILE *out;
-    const z_crc_t FAR *table;
-{
-    int n;
-
-    for (n = 0; n < 256; n++)
-        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ",
-                (unsigned long)(table[n]),
-                n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
-}
-#endif /* MAKECRCH */
-
-#else /* !DYNAMIC_CRC_TABLE */
-/* ========================================================================
- * Tables of CRC-32s of all single-byte values, made by make_crc_table().
- */
-#include "crc32.h"
-#endif /* DYNAMIC_CRC_TABLE */
-
-/* =========================================================================
- * This function can be used by asm versions of crc32()
- */
-const z_crc_t FAR * ZEXPORT get_crc_table()
-{
-#ifdef DYNAMIC_CRC_TABLE
-    if (crc_table_empty)
-        make_crc_table();
-#endif /* DYNAMIC_CRC_TABLE */
-    return (const z_crc_t FAR *)crc_table;
-}
-
-/* ========================================================================= */
-#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
-#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
-
-/* ========================================================================= */
-unsigned long ZEXPORT crc32_z(crc, buf, len)
-    unsigned long crc;
-    const unsigned char FAR *buf;
-    z_size_t len;
-{
-    if (buf == Z_NULL) return 0UL;
-
-#ifdef DYNAMIC_CRC_TABLE
-    if (crc_table_empty)
-        make_crc_table();
-#endif /* DYNAMIC_CRC_TABLE */
-
-#ifdef BYFOUR
-    if (sizeof(void *) == sizeof(ptrdiff_t)) {
-        z_crc_t endian;
-
-        endian = 1;
-        if (*((unsigned char *)(&endian)))
-            return crc32_little(crc, buf, len);
-        else
-            return crc32_big(crc, buf, len);
-    }
-#endif /* BYFOUR */
-    crc = crc ^ 0xffffffffUL;
-    while (len >= 8) {
-        DO8;
-        len -= 8;
-    }
-    if (len) do {
-        DO1;
-    } while (--len);
-    return crc ^ 0xffffffffUL;
-}
-
-/* ========================================================================= */
-unsigned long ZEXPORT crc32(crc, buf, len)
-    unsigned long crc;
-    const unsigned char FAR *buf;
-    uInt len;
-{
-    return crc32_z(crc, buf, len);
-}
-
-#ifdef BYFOUR
-
-/*
-   This BYFOUR code accesses the passed unsigned char * buffer with a 32-bit
-   integer pointer type. This violates the strict aliasing rule, where a
-   compiler can assume, for optimization purposes, that two pointers to
-   fundamentally different types won't ever point to the same memory. This can
-   manifest as a problem only if one of the pointers is written to. This code
-   only reads from those pointers. So long as this code remains isolated in
-   this compilation unit, there won't be a problem. For this reason, this code
-   should not be copied and pasted into a compilation unit in which other code
-   writes to the buffer that is passed to these routines.
- */
-
-/* ========================================================================= */
-#define DOLIT4 c ^= *buf4++; \
-        c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
-            crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
-#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
-
-/* ========================================================================= */
-local unsigned long crc32_little(crc, buf, len)
-    unsigned long crc;
-    const unsigned char FAR *buf;
-    z_size_t len;
-{
-    register z_crc_t c;
-    register const z_crc_t FAR *buf4;
-
-    c = (z_crc_t)crc;
-    c = ~c;
-    while (len && ((ptrdiff_t)buf & 3)) {
-        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
-        len--;
-    }
-
-    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
-    while (len >= 32) {
-        DOLIT32;
-        len -= 32;
-    }
-    while (len >= 4) {
-        DOLIT4;
-        len -= 4;
-    }
-    buf = (const unsigned char FAR *)buf4;
-
-    if (len) do {
-        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
-    } while (--len);
-    c = ~c;
-    return (unsigned long)c;
-}
-
-/* ========================================================================= */
-#define DOBIG4 c ^= *buf4++; \
-        c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
-            crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
-#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
-
-/* ========================================================================= */
-local unsigned long crc32_big(crc, buf, len)
-    unsigned long crc;
-    const unsigned char FAR *buf;
-    z_size_t len;
-{
-    register z_crc_t c;
-    register const z_crc_t FAR *buf4;
-
-    c = ZSWAP32((z_crc_t)crc);
-    c = ~c;
-    while (len && ((ptrdiff_t)buf & 3)) {
-        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
-        len--;
-    }
-
-    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
-    while (len >= 32) {
-        DOBIG32;
-        len -= 32;
-    }
-    while (len >= 4) {
-        DOBIG4;
-        len -= 4;
-    }
-    buf = (const unsigned char FAR *)buf4;
-
-    if (len) do {
-        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
-    } while (--len);
-    c = ~c;
-    return (unsigned long)(ZSWAP32(c));
-}
-
-#endif /* BYFOUR */
-
-#define GF2_DIM 32      /* dimension of GF(2) vectors (length of CRC) */
-
-/* ========================================================================= */
-local unsigned long gf2_matrix_times(mat, vec)
-    unsigned long *mat;
-    unsigned long vec;
-{
-    unsigned long sum;
-
-    sum = 0;
-    while (vec) {
-        if (vec & 1)
-            sum ^= *mat;
-        vec >>= 1;
-        mat++;
-    }
-    return sum;
-}
-
-/* ========================================================================= */
-local void gf2_matrix_square(square, mat)
-    unsigned long *square;
-    unsigned long *mat;
-{
-    int n;
-
-    for (n = 0; n < GF2_DIM; n++)
-        square[n] = gf2_matrix_times(mat, mat[n]);
-}
-
-/* ========================================================================= */
-local uLong crc32_combine_(crc1, crc2, len2)
-    uLong crc1;
-    uLong crc2;
-    z_off64_t len2;
-{
-    int n;
-    unsigned long row;
-    unsigned long even[GF2_DIM];    /* even-power-of-two zeros operator */
-    unsigned long odd[GF2_DIM];     /* odd-power-of-two zeros operator */
-
-    /* degenerate case (also disallow negative lengths) */
-    if (len2 <= 0)
-        return crc1;
-
-    /* put operator for one zero bit in odd */
-    odd[0] = 0xedb88320UL;          /* CRC-32 polynomial */
-    row = 1;
-    for (n = 1; n < GF2_DIM; n++) {
-        odd[n] = row;
-        row <<= 1;
-    }
-
-    /* put operator for two zero bits in even */
-    gf2_matrix_square(even, odd);
-
-    /* put operator for four zero bits in odd */
-    gf2_matrix_square(odd, even);
-
-    /* apply len2 zeros to crc1 (first square will put the operator for one
-       zero byte, eight zero bits, in even) */
-    do {
-        /* apply zeros operator for this bit of len2 */
-        gf2_matrix_square(even, odd);
-        if (len2 & 1)
-            crc1 = gf2_matrix_times(even, crc1);
-        len2 >>= 1;
-
-        /* if no more bits set, then done */
-        if (len2 == 0)
-            break;
-
-        /* another iteration of the loop with odd and even swapped */
-        gf2_matrix_square(odd, even);
-        if (len2 & 1)
-            crc1 = gf2_matrix_times(odd, crc1);
-        len2 >>= 1;
-
-        /* if no more bits set, then done */
-    } while (len2 != 0);
-
-    /* return combined crc */
-    crc1 ^= crc2;
-    return crc1;
-}
-
-/* ========================================================================= */
-uLong ZEXPORT crc32_combine(crc1, crc2, len2)
-    uLong crc1;
-    uLong crc2;
-    z_off_t len2;
-{
-    return crc32_combine_(crc1, crc2, len2);
-}
-
-uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
-    uLong crc1;
-    uLong crc2;
-    z_off64_t len2;
-{
-    return crc32_combine_(crc1, crc2, len2);
-}
diff --git a/Modules/zlib/crc32.h b/Modules/zlib/crc32.h
deleted file mode 100644
index 9e0c778..0000000
--- a/Modules/zlib/crc32.h
+++ /dev/null
@@ -1,441 +0,0 @@
-/* crc32.h -- tables for rapid CRC calculation
- * Generated automatically by crc32.c
- */
-
-local const z_crc_t FAR crc_table[TBLS][256] =
-{
-  {
-    0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
-    0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
-    0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
-    0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
-    0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
-    0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
-    0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
-    0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
-    0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
-    0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
-    0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
-    0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
-    0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
-    0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
-    0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
-    0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
-    0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
-    0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
-    0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
-    0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
-    0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
-    0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
-    0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
-    0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
-    0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
-    0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
-    0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
-    0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
-    0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
-    0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
-    0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
-    0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
-    0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
-    0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
-    0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
-    0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
-    0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
-    0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
-    0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
-    0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
-    0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
-    0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
-    0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
-    0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
-    0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
-    0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
-    0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
-    0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
-    0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
-    0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
-    0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
-    0x2d02ef8dUL
-#ifdef BYFOUR
-  },
-  {
-    0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
-    0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
-    0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
-    0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
-    0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
-    0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
-    0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
-    0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
-    0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
-    0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
-    0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
-    0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
-    0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
-    0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
-    0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
-    0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
-    0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
-    0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
-    0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
-    0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
-    0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
-    0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
-    0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
-    0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
-    0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
-    0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
-    0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
-    0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
-    0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
-    0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
-    0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
-    0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
-    0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
-    0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
-    0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
-    0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
-    0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
-    0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
-    0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
-    0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
-    0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
-    0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
-    0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
-    0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
-    0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
-    0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
-    0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
-    0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
-    0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
-    0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
-    0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
-    0x9324fd72UL
-  },
-  {
-    0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
-    0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
-    0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
-    0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
-    0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
-    0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
-    0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
-    0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
-    0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
-    0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
-    0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
-    0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
-    0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
-    0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
-    0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
-    0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
-    0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
-    0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
-    0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
-    0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
-    0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
-    0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
-    0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
-    0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
-    0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
-    0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
-    0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
-    0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
-    0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
-    0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
-    0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
-    0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
-    0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
-    0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
-    0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
-    0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
-    0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
-    0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
-    0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
-    0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
-    0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
-    0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
-    0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
-    0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
-    0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
-    0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
-    0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
-    0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
-    0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
-    0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
-    0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
-    0xbe9834edUL
-  },
-  {
-    0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
-    0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
-    0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
-    0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
-    0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
-    0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
-    0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
-    0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
-    0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
-    0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
-    0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
-    0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
-    0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
-    0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
-    0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
-    0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
-    0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
-    0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
-    0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
-    0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
-    0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
-    0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
-    0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
-    0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
-    0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
-    0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
-    0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
-    0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
-    0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
-    0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
-    0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
-    0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
-    0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
-    0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
-    0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
-    0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
-    0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
-    0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
-    0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
-    0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
-    0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
-    0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
-    0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
-    0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
-    0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
-    0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
-    0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
-    0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
-    0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
-    0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
-    0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
-    0xde0506f1UL
-  },
-  {
-    0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
-    0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
-    0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
-    0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
-    0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
-    0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
-    0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
-    0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
-    0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
-    0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
-    0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
-    0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
-    0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
-    0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
-    0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
-    0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
-    0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
-    0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
-    0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
-    0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
-    0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
-    0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
-    0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
-    0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
-    0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
-    0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
-    0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
-    0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
-    0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
-    0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
-    0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
-    0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
-    0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
-    0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
-    0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
-    0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
-    0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
-    0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
-    0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
-    0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
-    0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
-    0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
-    0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
-    0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
-    0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
-    0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
-    0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
-    0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
-    0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
-    0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
-    0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
-    0x8def022dUL
-  },
-  {
-    0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
-    0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
-    0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
-    0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
-    0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
-    0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
-    0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
-    0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
-    0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
-    0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
-    0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
-    0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
-    0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
-    0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
-    0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
-    0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
-    0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
-    0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
-    0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
-    0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
-    0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
-    0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
-    0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
-    0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
-    0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
-    0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
-    0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
-    0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
-    0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
-    0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
-    0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
-    0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
-    0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
-    0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
-    0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
-    0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
-    0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
-    0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
-    0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
-    0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
-    0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
-    0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
-    0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
-    0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
-    0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
-    0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
-    0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
-    0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
-    0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
-    0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
-    0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
-    0x72fd2493UL
-  },
-  {
-    0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
-    0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
-    0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
-    0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
-    0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
-    0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
-    0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
-    0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
-    0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
-    0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
-    0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
-    0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
-    0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
-    0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
-    0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
-    0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
-    0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
-    0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
-    0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
-    0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
-    0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
-    0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
-    0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
-    0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
-    0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
-    0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
-    0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
-    0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
-    0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
-    0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
-    0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
-    0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
-    0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
-    0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
-    0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
-    0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
-    0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
-    0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
-    0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
-    0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
-    0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
-    0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
-    0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
-    0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
-    0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
-    0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
-    0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
-    0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
-    0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
-    0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
-    0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
-    0xed3498beUL
-  },
-  {
-    0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
-    0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
-    0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
-    0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
-    0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
-    0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
-    0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
-    0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
-    0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
-    0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
-    0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
-    0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
-    0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
-    0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
-    0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
-    0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
-    0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
-    0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
-    0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
-    0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
-    0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
-    0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
-    0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
-    0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
-    0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
-    0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
-    0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
-    0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
-    0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
-    0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
-    0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
-    0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
-    0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
-    0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
-    0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
-    0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
-    0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
-    0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
-    0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
-    0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
-    0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
-    0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
-    0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
-    0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
-    0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
-    0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
-    0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
-    0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
-    0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
-    0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
-    0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
-    0xf10605deUL
-#endif
-  }
-};
diff --git a/Modules/zlib/deflate.c b/Modules/zlib/deflate.c
deleted file mode 100644
index 1ec7614..0000000
--- a/Modules/zlib/deflate.c
+++ /dev/null
@@ -1,2163 +0,0 @@
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process depends on being able to identify portions
- *      of the input text which are identical to earlier input (within a
- *      sliding window trailing behind the input currently being processed).
- *
- *      The most straightforward technique turns out to be the fastest for
- *      most input files: try all possible matches and select the longest.
- *      The key feature of this algorithm is that insertions into the string
- *      dictionary are very simple and thus fast, and deletions are avoided
- *      completely. Insertions are performed at each input character, whereas
- *      string matches are performed only when the previous match ends. So it
- *      is preferable to spend more time in matches to allow very fast string
- *      insertions and avoid deletions. The matching algorithm for small
- *      strings is inspired from that of Rabin & Karp. A brute force approach
- *      is used to find longer strings when a small match has been found.
- *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- *      (by Leonid Broukhis).
- *         A previous version of this file used a more sophisticated algorithm
- *      (by Fiala and Greene) which is guaranteed to run in linear amortized
- *      time, but has a larger average cost, uses more memory and is patented.
- *      However the F&G algorithm may be faster for some highly redundant
- *      files if the parameter max_chain_length (described below) is too large.
- *
- *  ACKNOWLEDGEMENTS
- *
- *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- *      I found it in 'freeze' written by Leonid Broukhis.
- *      Thanks to many people for bug reports and testing.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- *      Available in http://tools.ietf.org/html/rfc1951
- *
- *      A description of the Rabin and Karp algorithm is given in the book
- *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- *      Fiala,E.R., and Greene,D.H.
- *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* @(#) $Id$ */
-
-#include "deflate.h"
-
-const char deflate_copyright[] =
-   " deflate 1.2.11 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- *  Function prototypes.
- */
-typedef enum {
-    need_more,      /* block not completed, need more input or more output */
-    block_done,     /* block flush performed */
-    finish_started, /* finish started, need only more output at next deflate */
-    finish_done     /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local int deflateStateCheck      OF((z_streamp strm));
-local void slide_hash     OF((deflate_state *s));
-local void fill_window    OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast   OF((deflate_state *s, int flush));
-#ifndef FASTEST
-local block_state deflate_slow   OF((deflate_state *s, int flush));
-#endif
-local block_state deflate_rle    OF((deflate_state *s, int flush));
-local block_state deflate_huff   OF((deflate_state *s, int flush));
-local void lm_init        OF((deflate_state *s));
-local void putShortMSB    OF((deflate_state *s, uInt b));
-local void flush_pending  OF((z_streamp strm));
-local unsigned read_buf   OF((z_streamp strm, Bytef *buf, unsigned size));
-#ifdef ASMV
-#  pragma message("Assembler code may have bugs -- use at your own risk")
-      void match_init OF((void)); /* asm code initialization */
-      uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#else
-local uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#endif
-
-#ifdef ZLIB_DEBUG
-local  void check_match OF((deflate_state *s, IPos start, IPos match,
-                            int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-#  define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
-   ush good_length; /* reduce lazy search above this match length */
-   ush max_lazy;    /* do not perform lazy search above this match length */
-   ush nice_length; /* quit search above this match length */
-   ush max_chain;
-   compress_func func;
-} config;
-
-#ifdef FASTEST
-local const config configuration_table[2] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}}; /* max speed, no lazy matches */
-#else
-local const config configuration_table[10] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}, /* max speed, no lazy matches */
-/* 2 */ {4,    5, 16,    8, deflate_fast},
-/* 3 */ {4,    6, 32,   32, deflate_fast},
-
-/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
-/* 5 */ {8,   16, 32,   32, deflate_slow},
-/* 6 */ {8,   16, 128, 128, deflate_slow},
-/* 7 */ {8,   32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
-#endif
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */
-#define RANK(f) (((f) * 2) - ((f) > 4 ? 9 : 0))
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN  assertion: all calls to UPDATE_HASH are made with consecutive input
- *    characters, so that a running hash key can be computed from the previous
- *    key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * If this file is compiled with -DFASTEST, the compression level is forced
- * to 1, and no hash chains are maintained.
- * IN  assertion: all calls to INSERT_STRING are made with consecutive input
- *    characters and the first MIN_MATCH bytes of str are valid (except for
- *    the last MIN_MATCH-1 bytes of the input file).
- */
-#ifdef FASTEST
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-#else
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-#endif
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
-    s->head[s->hash_size-1] = NIL; \
-    zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ===========================================================================
- * Slide the hash table when sliding the window down (could be avoided with 32
- * bit values at the expense of memory usage). We slide even when level == 0 to
- * keep the hash table consistent if we switch back to level > 0 later.
- */
-local void slide_hash(s)
-    deflate_state *s;
-{
-    unsigned n, m;
-    Posf *p;
-    uInt wsize = s->w_size;
-
-    n = s->hash_size;
-    p = &s->head[n];
-    do {
-        m = *--p;
-        *p = (Pos)(m >= wsize ? m - wsize : NIL);
-    } while (--n);
-    n = wsize;
-#ifndef FASTEST
-    p = &s->prev[n];
-    do {
-        m = *--p;
-        *p = (Pos)(m >= wsize ? m - wsize : NIL);
-        /* If n is not on any hash chain, prev[n] is garbage but
-         * its value will never be used.
-         */
-    } while (--n);
-#endif
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateInit_(strm, level, version, stream_size)
-    z_streamp strm;
-    int level;
-    const char *version;
-    int stream_size;
-{
-    return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
-                         Z_DEFAULT_STRATEGY, version, stream_size);
-    /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
-                  version, stream_size)
-    z_streamp strm;
-    int  level;
-    int  method;
-    int  windowBits;
-    int  memLevel;
-    int  strategy;
-    const char *version;
-    int stream_size;
-{
-    deflate_state *s;
-    int wrap = 1;
-    static const char my_version[] = ZLIB_VERSION;
-
-    ushf *overlay;
-    /* We overlay pending_buf and d_buf+l_buf. This works since the average
-     * output size for (length,distance) codes is <= 24 bits.
-     */
-
-    if (version == Z_NULL || version[0] != my_version[0] ||
-        stream_size != sizeof(z_stream)) {
-        return Z_VERSION_ERROR;
-    }
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->msg = Z_NULL;
-    if (strm->zalloc == (alloc_func)0) {
-#ifdef Z_SOLO
-        return Z_STREAM_ERROR;
-#else
-        strm->zalloc = zcalloc;
-        strm->opaque = (voidpf)0;
-#endif
-    }
-    if (strm->zfree == (free_func)0)
-#ifdef Z_SOLO
-        return Z_STREAM_ERROR;
-#else
-        strm->zfree = zcfree;
-#endif
-
-#ifdef FASTEST
-    if (level != 0) level = 1;
-#else
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#endif
-
-    if (windowBits < 0) { /* suppress zlib wrapper */
-        wrap = 0;
-        windowBits = -windowBits;
-    }
-#ifdef GZIP
-    else if (windowBits > 15) {
-        wrap = 2;       /* write gzip wrapper instead */
-        windowBits -= 16;
-    }
-#endif
-    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
-        windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
-        strategy < 0 || strategy > Z_FIXED || (windowBits == 8 && wrap != 1)) {
-        return Z_STREAM_ERROR;
-    }
-    if (windowBits == 8) windowBits = 9;  /* until 256-byte window bug fixed */
-    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
-    if (s == Z_NULL) return Z_MEM_ERROR;
-    strm->state = (struct internal_state FAR *)s;
-    s->strm = strm;
-    s->status = INIT_STATE;     /* to pass state test in deflateReset() */
-
-    s->wrap = wrap;
-    s->gzhead = Z_NULL;
-    s->w_bits = (uInt)windowBits;
-    s->w_size = 1 << s->w_bits;
-    s->w_mask = s->w_size - 1;
-
-    s->hash_bits = (uInt)memLevel + 7;
-    s->hash_size = 1 << s->hash_bits;
-    s->hash_mask = s->hash_size - 1;
-    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
-    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
-    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
-    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
-
-    s->high_water = 0;      /* nothing written to s->window yet */
-
-    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
-    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
-    s->pending_buf = (uchf *) overlay;
-    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
-
-    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
-        s->pending_buf == Z_NULL) {
-        s->status = FINISH_STATE;
-        strm->msg = ERR_MSG(Z_MEM_ERROR);
-        deflateEnd (strm);
-        return Z_MEM_ERROR;
-    }
-    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
-    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
-    s->level = level;
-    s->strategy = strategy;
-    s->method = (Byte)method;
-
-    return deflateReset(strm);
-}
-
-/* =========================================================================
- * Check for a valid deflate stream state. Return 0 if ok, 1 if not.
- */
-local int deflateStateCheck (strm)
-    z_streamp strm;
-{
-    deflate_state *s;
-    if (strm == Z_NULL ||
-        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
-        return 1;
-    s = strm->state;
-    if (s == Z_NULL || s->strm != strm || (s->status != INIT_STATE &&
-#ifdef GZIP
-                                           s->status != GZIP_STATE &&
-#endif
-                                           s->status != EXTRA_STATE &&
-                                           s->status != NAME_STATE &&
-                                           s->status != COMMENT_STATE &&
-                                           s->status != HCRC_STATE &&
-                                           s->status != BUSY_STATE &&
-                                           s->status != FINISH_STATE))
-        return 1;
-    return 0;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
-    z_streamp strm;
-    const Bytef *dictionary;
-    uInt  dictLength;
-{
-    deflate_state *s;
-    uInt str, n;
-    int wrap;
-    unsigned avail;
-    z_const unsigned char *next;
-
-    if (deflateStateCheck(strm) || dictionary == Z_NULL)
-        return Z_STREAM_ERROR;
-    s = strm->state;
-    wrap = s->wrap;
-    if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead)
-        return Z_STREAM_ERROR;
-
-    /* when using zlib wrappers, compute Adler-32 for provided dictionary */
-    if (wrap == 1)
-        strm->adler = adler32(strm->adler, dictionary, dictLength);
-    s->wrap = 0;                    /* avoid computing Adler-32 in read_buf */
-
-    /* if dictionary would fill window, just replace the history */
-    if (dictLength >= s->w_size) {
-        if (wrap == 0) {            /* already empty otherwise */
-            CLEAR_HASH(s);
-            s->strstart = 0;
-            s->block_start = 0L;
-            s->insert = 0;
-        }
-        dictionary += dictLength - s->w_size;  /* use the tail */
-        dictLength = s->w_size;
-    }
-
-    /* insert dictionary into window and hash */
-    avail = strm->avail_in;
-    next = strm->next_in;
-    strm->avail_in = dictLength;
-    strm->next_in = (z_const Bytef *)dictionary;
-    fill_window(s);
-    while (s->lookahead >= MIN_MATCH) {
-        str = s->strstart;
-        n = s->lookahead - (MIN_MATCH-1);
-        do {
-            UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
-#ifndef FASTEST
-            s->prev[str & s->w_mask] = s->head[s->ins_h];
-#endif
-            s->head[s->ins_h] = (Pos)str;
-            str++;
-        } while (--n);
-        s->strstart = str;
-        s->lookahead = MIN_MATCH-1;
-        fill_window(s);
-    }
-    s->strstart += s->lookahead;
-    s->block_start = (long)s->strstart;
-    s->insert = s->lookahead;
-    s->lookahead = 0;
-    s->match_length = s->prev_length = MIN_MATCH-1;
-    s->match_available = 0;
-    strm->next_in = next;
-    strm->avail_in = avail;
-    s->wrap = wrap;
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateGetDictionary (strm, dictionary, dictLength)
-    z_streamp strm;
-    Bytef *dictionary;
-    uInt  *dictLength;
-{
-    deflate_state *s;
-    uInt len;
-
-    if (deflateStateCheck(strm))
-        return Z_STREAM_ERROR;
-    s = strm->state;
-    len = s->strstart + s->lookahead;
-    if (len > s->w_size)
-        len = s->w_size;
-    if (dictionary != Z_NULL && len)
-        zmemcpy(dictionary, s->window + s->strstart + s->lookahead - len, len);
-    if (dictLength != Z_NULL)
-        *dictLength = len;
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateResetKeep (strm)
-    z_streamp strm;
-{
-    deflate_state *s;
-
-    if (deflateStateCheck(strm)) {
-        return Z_STREAM_ERROR;
-    }
-
-    strm->total_in = strm->total_out = 0;
-    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
-    strm->data_type = Z_UNKNOWN;
-
-    s = (deflate_state *)strm->state;
-    s->pending = 0;
-    s->pending_out = s->pending_buf;
-
-    if (s->wrap < 0) {
-        s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
-    }
-    s->status =
-#ifdef GZIP
-        s->wrap == 2 ? GZIP_STATE :
-#endif
-        s->wrap ? INIT_STATE : BUSY_STATE;
-    strm->adler =
-#ifdef GZIP
-        s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
-#endif
-        adler32(0L, Z_NULL, 0);
-    s->last_flush = Z_NO_FLUSH;
-
-    _tr_init(s);
-
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateReset (strm)
-    z_streamp strm;
-{
-    int ret;
-
-    ret = deflateResetKeep(strm);
-    if (ret == Z_OK)
-        lm_init(strm->state);
-    return ret;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetHeader (strm, head)
-    z_streamp strm;
-    gz_headerp head;
-{
-    if (deflateStateCheck(strm) || strm->state->wrap != 2)
-        return Z_STREAM_ERROR;
-    strm->state->gzhead = head;
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflatePending (strm, pending, bits)
-    unsigned *pending;
-    int *bits;
-    z_streamp strm;
-{
-    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
-    if (pending != Z_NULL)
-        *pending = strm->state->pending;
-    if (bits != Z_NULL)
-        *bits = strm->state->bi_valid;
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflatePrime (strm, bits, value)
-    z_streamp strm;
-    int bits;
-    int value;
-{
-    deflate_state *s;
-    int put;
-
-    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
-    s = strm->state;
-    if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3))
-        return Z_BUF_ERROR;
-    do {
-        put = Buf_size - s->bi_valid;
-        if (put > bits)
-            put = bits;
-        s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid);
-        s->bi_valid += put;
-        _tr_flush_bits(s);
-        value >>= put;
-        bits -= put;
-    } while (bits);
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateParams(strm, level, strategy)
-    z_streamp strm;
-    int level;
-    int strategy;
-{
-    deflate_state *s;
-    compress_func func;
-
-    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
-    s = strm->state;
-
-#ifdef FASTEST
-    if (level != 0) level = 1;
-#else
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#endif
-    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
-        return Z_STREAM_ERROR;
-    }
-    func = configuration_table[s->level].func;
-
-    if ((strategy != s->strategy || func != configuration_table[level].func) &&
-        s->high_water) {
-        /* Flush the last buffer: */
-        int err = deflate(strm, Z_BLOCK);
-        if (err == Z_STREAM_ERROR)
-            return err;
-        if (strm->avail_out == 0)
-            return Z_BUF_ERROR;
-    }
-    if (s->level != level) {
-        if (s->level == 0 && s->matches != 0) {
-            if (s->matches == 1)
-                slide_hash(s);
-            else
-                CLEAR_HASH(s);
-            s->matches = 0;
-        }
-        s->level = level;
-        s->max_lazy_match   = configuration_table[level].max_lazy;
-        s->good_match       = configuration_table[level].good_length;
-        s->nice_match       = configuration_table[level].nice_length;
-        s->max_chain_length = configuration_table[level].max_chain;
-    }
-    s->strategy = strategy;
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
-    z_streamp strm;
-    int good_length;
-    int max_lazy;
-    int nice_length;
-    int max_chain;
-{
-    deflate_state *s;
-
-    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
-    s = strm->state;
-    s->good_match = (uInt)good_length;
-    s->max_lazy_match = (uInt)max_lazy;
-    s->nice_match = nice_length;
-    s->max_chain_length = (uInt)max_chain;
-    return Z_OK;
-}
-
-/* =========================================================================
- * For the default windowBits of 15 and memLevel of 8, this function returns
- * a close to exact, as well as small, upper bound on the compressed size.
- * They are coded as constants here for a reason--if the #define's are
- * changed, then this function needs to be changed as well.  The return
- * value for 15 and 8 only works for those exact settings.
- *
- * For any setting other than those defaults for windowBits and memLevel,
- * the value returned is a conservative worst case for the maximum expansion
- * resulting from using fixed blocks instead of stored blocks, which deflate
- * can emit on compressed data for some combinations of the parameters.
- *
- * This function could be more sophisticated to provide closer upper bounds for
- * every combination of windowBits and memLevel.  But even the conservative
- * upper bound of about 14% expansion does not seem onerous for output buffer
- * allocation.
- */
-uLong ZEXPORT deflateBound(strm, sourceLen)
-    z_streamp strm;
-    uLong sourceLen;
-{
-    deflate_state *s;
-    uLong complen, wraplen;
-
-    /* conservative upper bound for compressed data */
-    complen = sourceLen +
-              ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
-
-    /* if can't get parameters, return conservative bound plus zlib wrapper */
-    if (deflateStateCheck(strm))
-        return complen + 6;
-
-    /* compute wrapper length */
-    s = strm->state;
-    switch (s->wrap) {
-    case 0:                                 /* raw deflate */
-        wraplen = 0;
-        break;
-    case 1:                                 /* zlib wrapper */
-        wraplen = 6 + (s->strstart ? 4 : 0);
-        break;
-#ifdef GZIP
-    case 2:                                 /* gzip wrapper */
-        wraplen = 18;
-        if (s->gzhead != Z_NULL) {          /* user-supplied gzip header */
-            Bytef *str;
-            if (s->gzhead->extra != Z_NULL)
-                wraplen += 2 + s->gzhead->extra_len;
-            str = s->gzhead->name;
-            if (str != Z_NULL)
-                do {
-                    wraplen++;
-                } while (*str++);
-            str = s->gzhead->comment;
-            if (str != Z_NULL)
-                do {
-                    wraplen++;
-                } while (*str++);
-            if (s->gzhead->hcrc)
-                wraplen += 2;
-        }
-        break;
-#endif
-    default:                                /* for compiler happiness */
-        wraplen = 6;
-    }
-
-    /* if not default parameters, return conservative bound */
-    if (s->w_bits != 15 || s->hash_bits != 8 + 7)
-        return complen + wraplen;
-
-    /* default settings: return tight bound for that case */
-    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
-           (sourceLen >> 25) + 13 - 6 + wraplen;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
-    deflate_state *s;
-    uInt b;
-{
-    put_byte(s, (Byte)(b >> 8));
-    put_byte(s, (Byte)(b & 0xff));
-}
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output, except for
- * some deflate_stored() output, goes through this function so some
- * applications may wish to modify it to avoid allocating a large
- * strm->next_out buffer and copying into it. (See also read_buf()).
- */
-local void flush_pending(strm)
-    z_streamp strm;
-{
-    unsigned len;
-    deflate_state *s = strm->state;
-
-    _tr_flush_bits(s);
-    len = s->pending;
-    if (len > strm->avail_out) len = strm->avail_out;
-    if (len == 0) return;
-
-    zmemcpy(strm->next_out, s->pending_out, len);
-    strm->next_out  += len;
-    s->pending_out  += len;
-    strm->total_out += len;
-    strm->avail_out -= len;
-    s->pending      -= len;
-    if (s->pending == 0) {
-        s->pending_out = s->pending_buf;
-    }
-}
-
-/* ===========================================================================
- * Update the header CRC with the bytes s->pending_buf[beg..s->pending - 1].
- */
-#define HCRC_UPDATE(beg) \
-    do { \
-        if (s->gzhead->hcrc && s->pending > (beg)) \
-            strm->adler = crc32(strm->adler, s->pending_buf + (beg), \
-                                s->pending - (beg)); \
-    } while (0)
-
-/* ========================================================================= */
-int ZEXPORT deflate (strm, flush)
-    z_streamp strm;
-    int flush;
-{
-    int old_flush; /* value of flush param for previous deflate call */
-    deflate_state *s;
-
-    if (deflateStateCheck(strm) || flush > Z_BLOCK || flush < 0) {
-        return Z_STREAM_ERROR;
-    }
-    s = strm->state;
-
-    if (strm->next_out == Z_NULL ||
-        (strm->avail_in != 0 && strm->next_in == Z_NULL) ||
-        (s->status == FINISH_STATE && flush != Z_FINISH)) {
-        ERR_RETURN(strm, Z_STREAM_ERROR);
-    }
-    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
-    old_flush = s->last_flush;
-    s->last_flush = flush;
-
-    /* Flush as much pending output as possible */
-    if (s->pending != 0) {
-        flush_pending(strm);
-        if (strm->avail_out == 0) {
-            /* Since avail_out is 0, deflate will be called again with
-             * more output space, but possibly with both pending and
-             * avail_in equal to zero. There won't be anything to do,
-             * but this is not an error situation so make sure we
-             * return OK instead of BUF_ERROR at next call of deflate:
-             */
-            s->last_flush = -1;
-            return Z_OK;
-        }
-
-    /* Make sure there is something to do and avoid duplicate consecutive
-     * flushes. For repeated and useless calls with Z_FINISH, we keep
-     * returning Z_STREAM_END instead of Z_BUF_ERROR.
-     */
-    } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
-               flush != Z_FINISH) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (s->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* Write the header */
-    if (s->status == INIT_STATE) {
-        /* zlib header */
-        uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
-        uInt level_flags;
-
-        if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
-            level_flags = 0;
-        else if (s->level < 6)
-            level_flags = 1;
-        else if (s->level == 6)
-            level_flags = 2;
-        else
-            level_flags = 3;
-        header |= (level_flags << 6);
-        if (s->strstart != 0) header |= PRESET_DICT;
-        header += 31 - (header % 31);
-
-        putShortMSB(s, header);
-
-        /* Save the adler32 of the preset dictionary: */
-        if (s->strstart != 0) {
-            putShortMSB(s, (uInt)(strm->adler >> 16));
-            putShortMSB(s, (uInt)(strm->adler & 0xffff));
-        }
-        strm->adler = adler32(0L, Z_NULL, 0);
-        s->status = BUSY_STATE;
-
-        /* Compression must start with an empty pending buffer */
-        flush_pending(strm);
-        if (s->pending != 0) {
-            s->last_flush = -1;
-            return Z_OK;
-        }
-    }
-#ifdef GZIP
-    if (s->status == GZIP_STATE) {
-        /* gzip header */
-        strm->adler = crc32(0L, Z_NULL, 0);
-        put_byte(s, 31);
-        put_byte(s, 139);
-        put_byte(s, 8);
-        if (s->gzhead == Z_NULL) {
-            put_byte(s, 0);
-            put_byte(s, 0);
-            put_byte(s, 0);
-            put_byte(s, 0);
-            put_byte(s, 0);
-            put_byte(s, s->level == 9 ? 2 :
-                     (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                      4 : 0));
-            put_byte(s, OS_CODE);
-            s->status = BUSY_STATE;
-
-            /* Compression must start with an empty pending buffer */
-            flush_pending(strm);
-            if (s->pending != 0) {
-                s->last_flush = -1;
-                return Z_OK;
-            }
-        }
-        else {
-            put_byte(s, (s->gzhead->text ? 1 : 0) +
-                     (s->gzhead->hcrc ? 2 : 0) +
-                     (s->gzhead->extra == Z_NULL ? 0 : 4) +
-                     (s->gzhead->name == Z_NULL ? 0 : 8) +
-                     (s->gzhead->comment == Z_NULL ? 0 : 16)
-                     );
-            put_byte(s, (Byte)(s->gzhead->time & 0xff));
-            put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
-            put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
-            put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
-            put_byte(s, s->level == 9 ? 2 :
-                     (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                      4 : 0));
-            put_byte(s, s->gzhead->os & 0xff);
-            if (s->gzhead->extra != Z_NULL) {
-                put_byte(s, s->gzhead->extra_len & 0xff);
-                put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
-            }
-            if (s->gzhead->hcrc)
-                strm->adler = crc32(strm->adler, s->pending_buf,
-                                    s->pending);
-            s->gzindex = 0;
-            s->status = EXTRA_STATE;
-        }
-    }
-    if (s->status == EXTRA_STATE) {
-        if (s->gzhead->extra != Z_NULL) {
-            ulg beg = s->pending;   /* start of bytes to update crc */
-            uInt left = (s->gzhead->extra_len & 0xffff) - s->gzindex;
-            while (s->pending + left > s->pending_buf_size) {
-                uInt copy = s->pending_buf_size - s->pending;
-                zmemcpy(s->pending_buf + s->pending,
-                        s->gzhead->extra + s->gzindex, copy);
-                s->pending = s->pending_buf_size;
-                HCRC_UPDATE(beg);
-                s->gzindex += copy;
-                flush_pending(strm);
-                if (s->pending != 0) {
-                    s->last_flush = -1;
-                    return Z_OK;
-                }
-                beg = 0;
-                left -= copy;
-            }
-            zmemcpy(s->pending_buf + s->pending,
-                    s->gzhead->extra + s->gzindex, left);
-            s->pending += left;
-            HCRC_UPDATE(beg);
-            s->gzindex = 0;
-        }
-        s->status = NAME_STATE;
-    }
-    if (s->status == NAME_STATE) {
-        if (s->gzhead->name != Z_NULL) {
-            ulg beg = s->pending;   /* start of bytes to update crc */
-            int val;
-            do {
-                if (s->pending == s->pending_buf_size) {
-                    HCRC_UPDATE(beg);
-                    flush_pending(strm);
-                    if (s->pending != 0) {
-                        s->last_flush = -1;
-                        return Z_OK;
-                    }
-                    beg = 0;
-                }
-                val = s->gzhead->name[s->gzindex++];
-                put_byte(s, val);
-            } while (val != 0);
-            HCRC_UPDATE(beg);
-            s->gzindex = 0;
-        }
-        s->status = COMMENT_STATE;
-    }
-    if (s->status == COMMENT_STATE) {
-        if (s->gzhead->comment != Z_NULL) {
-            ulg beg = s->pending;   /* start of bytes to update crc */
-            int val;
-            do {
-                if (s->pending == s->pending_buf_size) {
-                    HCRC_UPDATE(beg);
-                    flush_pending(strm);
-                    if (s->pending != 0) {
-                        s->last_flush = -1;
-                        return Z_OK;
-                    }
-                    beg = 0;
-                }
-                val = s->gzhead->comment[s->gzindex++];
-                put_byte(s, val);
-            } while (val != 0);
-            HCRC_UPDATE(beg);
-        }
-        s->status = HCRC_STATE;
-    }
-    if (s->status == HCRC_STATE) {
-        if (s->gzhead->hcrc) {
-            if (s->pending + 2 > s->pending_buf_size) {
-                flush_pending(strm);
-                if (s->pending != 0) {
-                    s->last_flush = -1;
-                    return Z_OK;
-                }
-            }
-            put_byte(s, (Byte)(strm->adler & 0xff));
-            put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
-            strm->adler = crc32(0L, Z_NULL, 0);
-        }
-        s->status = BUSY_STATE;
-
-        /* Compression must start with an empty pending buffer */
-        flush_pending(strm);
-        if (s->pending != 0) {
-            s->last_flush = -1;
-            return Z_OK;
-        }
-    }
-#endif
-
-    /* Start a new block or continue the current one.
-     */
-    if (strm->avail_in != 0 || s->lookahead != 0 ||
-        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
-        block_state bstate;
-
-        bstate = s->level == 0 ? deflate_stored(s, flush) :
-                 s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
-                 s->strategy == Z_RLE ? deflate_rle(s, flush) :
-                 (*(configuration_table[s->level].func))(s, flush);
-
-        if (bstate == finish_started || bstate == finish_done) {
-            s->status = FINISH_STATE;
-        }
-        if (bstate == need_more || bstate == finish_started) {
-            if (strm->avail_out == 0) {
-                s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
-            }
-            return Z_OK;
-            /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
-             * of deflate should use the same flush parameter to make sure
-             * that the flush is complete. So we don't have to output an
-             * empty block here, this will be done at next call. This also
-             * ensures that for a very small output buffer, we emit at most
-             * one empty block.
-             */
-        }
-        if (bstate == block_done) {
-            if (flush == Z_PARTIAL_FLUSH) {
-                _tr_align(s);
-            } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
-                _tr_stored_block(s, (char*)0, 0L, 0);
-                /* For a full flush, this empty block will be recognized
-                 * as a special marker by inflate_sync().
-                 */
-                if (flush == Z_FULL_FLUSH) {
-                    CLEAR_HASH(s);             /* forget history */
-                    if (s->lookahead == 0) {
-                        s->strstart = 0;
-                        s->block_start = 0L;
-                        s->insert = 0;
-                    }
-                }
-            }
-            flush_pending(strm);
-            if (strm->avail_out == 0) {
-              s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
-              return Z_OK;
-            }
-        }
-    }
-
-    if (flush != Z_FINISH) return Z_OK;
-    if (s->wrap <= 0) return Z_STREAM_END;
-
-    /* Write the trailer */
-#ifdef GZIP
-    if (s->wrap == 2) {
-        put_byte(s, (Byte)(strm->adler & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
-        put_byte(s, (Byte)(strm->total_in & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
-    }
-    else
-#endif
-    {
-        putShortMSB(s, (uInt)(strm->adler >> 16));
-        putShortMSB(s, (uInt)(strm->adler & 0xffff));
-    }
-    flush_pending(strm);
-    /* If avail_out is zero, the application will call deflate again
-     * to flush the rest.
-     */
-    if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
-    return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateEnd (strm)
-    z_streamp strm;
-{
-    int status;
-
-    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
-
-    status = strm->state->status;
-
-    /* Deallocate in reverse order of allocations: */
-    TRY_FREE(strm, strm->state->pending_buf);
-    TRY_FREE(strm, strm->state->head);
-    TRY_FREE(strm, strm->state->prev);
-    TRY_FREE(strm, strm->state->window);
-
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-
-    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* =========================================================================
- * Copy the source state to the destination state.
- * To simplify the source, this is not supported for 16-bit MSDOS (which
- * doesn't have enough memory anyway to duplicate compression states).
- */
-int ZEXPORT deflateCopy (dest, source)
-    z_streamp dest;
-    z_streamp source;
-{
-#ifdef MAXSEG_64K
-    return Z_STREAM_ERROR;
-#else
-    deflate_state *ds;
-    deflate_state *ss;
-    ushf *overlay;
-
-
-    if (deflateStateCheck(source) || dest == Z_NULL) {
-        return Z_STREAM_ERROR;
-    }
-
-    ss = source->state;
-
-    zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
-
-    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
-    if (ds == Z_NULL) return Z_MEM_ERROR;
-    dest->state = (struct internal_state FAR *) ds;
-    zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state));
-    ds->strm = dest;
-
-    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
-    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
-    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
-    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
-    ds->pending_buf = (uchf *) overlay;
-
-    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
-        ds->pending_buf == Z_NULL) {
-        deflateEnd (dest);
-        return Z_MEM_ERROR;
-    }
-    /* following zmemcpy do not work for 16-bit MSDOS */
-    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
-    zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos));
-    zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos));
-    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
-    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
-    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
-    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
-    ds->l_desc.dyn_tree = ds->dyn_ltree;
-    ds->d_desc.dyn_tree = ds->dyn_dtree;
-    ds->bl_desc.dyn_tree = ds->bl_tree;
-
-    return Z_OK;
-#endif /* MAXSEG_64K */
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.  All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local unsigned read_buf(strm, buf, size)
-    z_streamp strm;
-    Bytef *buf;
-    unsigned size;
-{
-    unsigned len = strm->avail_in;
-
-    if (len > size) len = size;
-    if (len == 0) return 0;
-
-    strm->avail_in  -= len;
-
-    zmemcpy(buf, strm->next_in, len);
-    if (strm->state->wrap == 1) {
-        strm->adler = adler32(strm->adler, buf, len);
-    }
-#ifdef GZIP
-    else if (strm->state->wrap == 2) {
-        strm->adler = crc32(strm->adler, buf, len);
-    }
-#endif
-    strm->next_in  += len;
-    strm->total_in += len;
-
-    return len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
-    deflate_state *s;
-{
-    s->window_size = (ulg)2L*s->w_size;
-
-    CLEAR_HASH(s);
-
-    /* Set the default configuration parameters:
-     */
-    s->max_lazy_match   = configuration_table[s->level].max_lazy;
-    s->good_match       = configuration_table[s->level].good_length;
-    s->nice_match       = configuration_table[s->level].nice_length;
-    s->max_chain_length = configuration_table[s->level].max_chain;
-
-    s->strstart = 0;
-    s->block_start = 0L;
-    s->lookahead = 0;
-    s->insert = 0;
-    s->match_length = s->prev_length = MIN_MATCH-1;
-    s->match_available = 0;
-    s->ins_h = 0;
-#ifndef FASTEST
-#ifdef ASMV
-    match_init(); /* initialize the asm code */
-#endif
-#endif
-}
-
-#ifndef FASTEST
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                      /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = (int)s->prev_length;         /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = (int)s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2.  Note that the checks below
-         * for insufficient lookahead only occur occasionally for performance
-         * reasons.  Therefore uninitialized memory will be accessed, and
-         * conditional jumps will be made that depend on those values.
-         * However the length of the match is limited to the lookahead, so
-         * the output of deflate is not affected by the uninitialized values.
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-    return s->lookahead;
-}
-#endif /* ASMV */
-
-#else /* FASTEST */
-
-/* ---------------------------------------------------------------------------
- * Optimized version for FASTEST only
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    Assert(cur_match < s->strstart, "no future");
-
-    match = s->window + cur_match;
-
-    /* Return failure if the match length is less than 2:
-     */
-    if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
-
-    /* The check at best_len-1 can be removed because it will be made
-     * again later. (This heuristic is not always a win.)
-     * It is not necessary to compare scan[2] and match[2] since they
-     * are always equal when the other bytes match, given that
-     * the hash keys are equal and that HASH_BITS >= 8.
-     */
-    scan += 2, match += 2;
-    Assert(*scan == *match, "match[2]?");
-
-    /* We check for insufficient lookahead only every 8th comparison;
-     * the 256th check will be made at strstart+258.
-     */
-    do {
-    } while (*++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             scan < strend);
-
-    Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-    len = MAX_MATCH - (int)(strend - scan);
-
-    if (len < MIN_MATCH) return MIN_MATCH - 1;
-
-    s->match_start = cur_match;
-    return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
-}
-
-#endif /* FASTEST */
-
-#ifdef ZLIB_DEBUG
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
-    deflate_state *s;
-    IPos start, match;
-    int length;
-{
-    /* check that the match is indeed a match */
-    if (zmemcmp(s->window + match,
-                s->window + start, length) != EQUAL) {
-        fprintf(stderr, " start %u, match %u, length %d\n",
-                start, match, length);
-        do {
-            fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
-        } while (--length != 0);
-        z_error("invalid match");
-    }
-    if (z_verbose > 1) {
-        fprintf(stderr,"\\[%d,%d]", start-match, length);
-        do { putc(s->window[start++], stderr); } while (--length != 0);
-    }
-}
-#else
-#  define check_match(s, start, match, length)
-#endif /* ZLIB_DEBUG */
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- *    At least one byte has been read, or avail_in == 0; reads are
- *    performed for at least two bytes (required for the zip translate_eol
- *    option -- not supported here).
- */
-local void fill_window(s)
-    deflate_state *s;
-{
-    unsigned n;
-    unsigned more;    /* Amount of free space at the end of the window. */
-    uInt wsize = s->w_size;
-
-    Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
-
-    do {
-        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
-        /* Deal with !@#$% 64K limit: */
-        if (sizeof(int) <= 2) {
-            if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
-                more = wsize;
-
-            } else if (more == (unsigned)(-1)) {
-                /* Very unlikely, but possible on 16 bit machine if
-                 * strstart == 0 && lookahead == 1 (input done a byte at time)
-                 */
-                more--;
-            }
-        }
-
-        /* If the window is almost full and there is insufficient lookahead,
-         * move the upper half to the lower one to make room in the upper half.
-         */
-        if (s->strstart >= wsize+MAX_DIST(s)) {
-
-            zmemcpy(s->window, s->window+wsize, (unsigned)wsize - more);
-            s->match_start -= wsize;
-            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-            s->block_start -= (long) wsize;
-            slide_hash(s);
-            more += wsize;
-        }
-        if (s->strm->avail_in == 0) break;
-
-        /* If there was no sliding:
-         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-         *    more == window_size - lookahead - strstart
-         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-         * => more >= window_size - 2*WSIZE + 2
-         * In the BIG_MEM or MMAP case (not yet supported),
-         *   window_size == input_size + MIN_LOOKAHEAD  &&
-         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-         * Otherwise, window_size == 2*WSIZE so more >= 2.
-         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-         */
-        Assert(more >= 2, "more < 2");
-
-        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
-        s->lookahead += n;
-
-        /* Initialize the hash value now that we have some input: */
-        if (s->lookahead + s->insert >= MIN_MATCH) {
-            uInt str = s->strstart - s->insert;
-            s->ins_h = s->window[str];
-            UPDATE_HASH(s, s->ins_h, s->window[str + 1]);
-#if MIN_MATCH != 3
-            Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-            while (s->insert) {
-                UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
-#ifndef FASTEST
-                s->prev[str & s->w_mask] = s->head[s->ins_h];
-#endif
-                s->head[s->ins_h] = (Pos)str;
-                str++;
-                s->insert--;
-                if (s->lookahead + s->insert < MIN_MATCH)
-                    break;
-            }
-        }
-        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
-         * but this is not important since only literal bytes will be emitted.
-         */
-
-    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-
-    /* If the WIN_INIT bytes after the end of the current data have never been
-     * written, then zero those bytes in order to avoid memory check reports of
-     * the use of uninitialized (or uninitialised as Julian writes) bytes by
-     * the longest match routines.  Update the high water mark for the next
-     * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
-     * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
-     */
-    if (s->high_water < s->window_size) {
-        ulg curr = s->strstart + (ulg)(s->lookahead);
-        ulg init;
-
-        if (s->high_water < curr) {
-            /* Previous high water mark below current data -- zero WIN_INIT
-             * bytes or up to end of window, whichever is less.
-             */
-            init = s->window_size - curr;
-            if (init > WIN_INIT)
-                init = WIN_INIT;
-            zmemzero(s->window + curr, (unsigned)init);
-            s->high_water = curr + init;
-        }
-        else if (s->high_water < (ulg)curr + WIN_INIT) {
-            /* High water mark at or above current data, but below current data
-             * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
-             * to end of window, whichever is less.
-             */
-            init = (ulg)curr + WIN_INIT - s->high_water;
-            if (init > s->window_size - s->high_water)
-                init = s->window_size - s->high_water;
-            zmemzero(s->window + s->high_water, (unsigned)init);
-            s->high_water += init;
-        }
-    }
-
-    Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
-           "not enough room for search");
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, last) { \
-   _tr_flush_block(s, (s->block_start >= 0L ? \
-                   (charf *)&s->window[(unsigned)s->block_start] : \
-                   (charf *)Z_NULL), \
-                (ulg)((long)s->strstart - s->block_start), \
-                (last)); \
-   s->block_start = s->strstart; \
-   flush_pending(s->strm); \
-   Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, last) { \
-   FLUSH_BLOCK_ONLY(s, last); \
-   if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
-}
-
-/* Maximum stored block length in deflate format (not including header). */
-#define MAX_STORED 65535
-
-/* Minimum of a and b. */
-#define MIN(a, b) ((a) > (b) ? (b) : (a))
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- *
- * In case deflateParams() is used to later switch to a non-zero compression
- * level, s->matches (otherwise unused when storing) keeps track of the number
- * of hash table slides to perform. If s->matches is 1, then one hash table
- * slide will be done when switching. If s->matches is 2, the maximum value
- * allowed here, then the hash table will be cleared, since two or more slides
- * is the same as a clear.
- *
- * deflate_stored() is written to minimize the number of times an input byte is
- * copied. It is most efficient with large input and output buffers, which
- * maximizes the opportunites to have a single copy from next_in to next_out.
- */
-local block_state deflate_stored(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    /* Smallest worthy block size when not flushing or finishing. By default
-     * this is 32K. This can be as small as 507 bytes for memLevel == 1. For
-     * large input and output buffers, the stored block size will be larger.
-     */
-    unsigned min_block = MIN(s->pending_buf_size - 5, s->w_size);
-
-    /* Copy as many min_block or larger stored blocks directly to next_out as
-     * possible. If flushing, copy the remaining available input to next_out as
-     * stored blocks, if there is enough space.
-     */
-    unsigned len, left, have, last = 0;
-    unsigned used = s->strm->avail_in;
-    do {
-        /* Set len to the maximum size block that we can copy directly with the
-         * available input data and output space. Set left to how much of that
-         * would be copied from what's left in the window.
-         */
-        len = MAX_STORED;       /* maximum deflate stored block length */
-        have = (s->bi_valid + 42) >> 3;         /* number of header bytes */
-        if (s->strm->avail_out < have)          /* need room for header */
-            break;
-            /* maximum stored block length that will fit in avail_out: */
-        have = s->strm->avail_out - have;
-        left = s->strstart - s->block_start;    /* bytes left in window */
-        if (len > (ulg)left + s->strm->avail_in)
-            len = left + s->strm->avail_in;     /* limit len to the input */
-        if (len > have)
-            len = have;                         /* limit len to the output */
-
-        /* If the stored block would be less than min_block in length, or if
-         * unable to copy all of the available input when flushing, then try
-         * copying to the window and the pending buffer instead. Also don't
-         * write an empty block when flushing -- deflate() does that.
-         */
-        if (len < min_block && ((len == 0 && flush != Z_FINISH) ||
-                                flush == Z_NO_FLUSH ||
-                                len != left + s->strm->avail_in))
-            break;
-
-        /* Make a dummy stored block in pending to get the header bytes,
-         * including any pending bits. This also updates the debugging counts.
-         */
-        last = flush == Z_FINISH && len == left + s->strm->avail_in ? 1 : 0;
-        _tr_stored_block(s, (char *)0, 0L, last);
-
-        /* Replace the lengths in the dummy stored block with len. */
-        s->pending_buf[s->pending - 4] = len;
-        s->pending_buf[s->pending - 3] = len >> 8;
-        s->pending_buf[s->pending - 2] = ~len;
-        s->pending_buf[s->pending - 1] = ~len >> 8;
-
-        /* Write the stored block header bytes. */
-        flush_pending(s->strm);
-
-#ifdef ZLIB_DEBUG
-        /* Update debugging counts for the data about to be copied. */
-        s->compressed_len += len << 3;
-        s->bits_sent += len << 3;
-#endif
-
-        /* Copy uncompressed bytes from the window to next_out. */
-        if (left) {
-            if (left > len)
-                left = len;
-            zmemcpy(s->strm->next_out, s->window + s->block_start, left);
-            s->strm->next_out += left;
-            s->strm->avail_out -= left;
-            s->strm->total_out += left;
-            s->block_start += left;
-            len -= left;
-        }
-
-        /* Copy uncompressed bytes directly from next_in to next_out, updating
-         * the check value.
-         */
-        if (len) {
-            read_buf(s->strm, s->strm->next_out, len);
-            s->strm->next_out += len;
-            s->strm->avail_out -= len;
-            s->strm->total_out += len;
-        }
-    } while (last == 0);
-
-    /* Update the sliding window with the last s->w_size bytes of the copied
-     * data, or append all of the copied data to the existing window if less
-     * than s->w_size bytes were copied. Also update the number of bytes to
-     * insert in the hash tables, in the event that deflateParams() switches to
-     * a non-zero compression level.
-     */
-    used -= s->strm->avail_in;      /* number of input bytes directly copied */
-    if (used) {
-        /* If any input was used, then no unused input remains in the window,
-         * therefore s->block_start == s->strstart.
-         */
-        if (used >= s->w_size) {    /* supplant the previous history */
-            s->matches = 2;         /* clear hash */
-            zmemcpy(s->window, s->strm->next_in - s->w_size, s->w_size);
-            s->strstart = s->w_size;
-        }
-        else {
-            if (s->window_size - s->strstart <= used) {
-                /* Slide the window down. */
-                s->strstart -= s->w_size;
-                zmemcpy(s->window, s->window + s->w_size, s->strstart);
-                if (s->matches < 2)
-                    s->matches++;   /* add a pending slide_hash() */
-            }
-            zmemcpy(s->window + s->strstart, s->strm->next_in - used, used);
-            s->strstart += used;
-        }
-        s->block_start = s->strstart;
-        s->insert += MIN(used, s->w_size - s->insert);
-    }
-    if (s->high_water < s->strstart)
-        s->high_water = s->strstart;
-
-    /* If the last block was written to next_out, then done. */
-    if (last)
-        return finish_done;
-
-    /* If flushing and all input has been consumed, then done. */
-    if (flush != Z_NO_FLUSH && flush != Z_FINISH &&
-        s->strm->avail_in == 0 && (long)s->strstart == s->block_start)
-        return block_done;
-
-    /* Fill the window with any remaining input. */
-    have = s->window_size - s->strstart - 1;
-    if (s->strm->avail_in > have && s->block_start >= (long)s->w_size) {
-        /* Slide the window down. */
-        s->block_start -= s->w_size;
-        s->strstart -= s->w_size;
-        zmemcpy(s->window, s->window + s->w_size, s->strstart);
-        if (s->matches < 2)
-            s->matches++;           /* add a pending slide_hash() */
-        have += s->w_size;          /* more space now */
-    }
-    if (have > s->strm->avail_in)
-        have = s->strm->avail_in;
-    if (have) {
-        read_buf(s->strm, s->window + s->strstart, have);
-        s->strstart += have;
-    }
-    if (s->high_water < s->strstart)
-        s->high_water = s->strstart;
-
-    /* There was not enough avail_out to write a complete worthy or flushed
-     * stored block to next_out. Write a stored block to pending instead, if we
-     * have enough input for a worthy block, or if flushing and there is enough
-     * room for the remaining input as a stored block in the pending buffer.
-     */
-    have = (s->bi_valid + 42) >> 3;         /* number of header bytes */
-        /* maximum stored block length that will fit in pending: */
-    have = MIN(s->pending_buf_size - have, MAX_STORED);
-    min_block = MIN(have, s->w_size);
-    left = s->strstart - s->block_start;
-    if (left >= min_block ||
-        ((left || flush == Z_FINISH) && flush != Z_NO_FLUSH &&
-         s->strm->avail_in == 0 && left <= have)) {
-        len = MIN(left, have);
-        last = flush == Z_FINISH && s->strm->avail_in == 0 &&
-               len == left ? 1 : 0;
-        _tr_stored_block(s, (charf *)s->window + s->block_start, len, last);
-        s->block_start += len;
-        flush_pending(s->strm);
-    }
-
-    /* We've done all we can with the available input and output. */
-    return last ? finish_started : need_more;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head;       /* head of the hash chain */
-    int bflush;           /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        hash_head = NIL;
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         * At this point we have always match_length < MIN_MATCH
-         */
-        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            s->match_length = longest_match (s, hash_head);
-            /* longest_match() sets match_start */
-        }
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->match_start, s->match_length);
-
-            _tr_tally_dist(s, s->strstart - s->match_start,
-                           s->match_length - MIN_MATCH, bflush);
-
-            s->lookahead -= s->match_length;
-
-            /* Insert new strings in the hash table only if the match length
-             * is not too large. This saves time but degrades compression.
-             */
-#ifndef FASTEST
-            if (s->match_length <= s->max_insert_length &&
-                s->lookahead >= MIN_MATCH) {
-                s->match_length--; /* string at strstart already in table */
-                do {
-                    s->strstart++;
-                    INSERT_STRING(s, s->strstart, hash_head);
-                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
-                     * always MIN_MATCH bytes ahead.
-                     */
-                } while (--s->match_length != 0);
-                s->strstart++;
-            } else
-#endif
-            {
-                s->strstart += s->match_length;
-                s->match_length = 0;
-                s->ins_h = s->window[s->strstart];
-                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-                Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
-                 * matter since it will be recomputed at next deflate call.
-                 */
-            }
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            _tr_tally_lit (s, s->window[s->strstart], bflush);
-            s->lookahead--;
-            s->strstart++;
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
-        return finish_done;
-    }
-    if (s->last_lit)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
-}
-
-#ifndef FASTEST
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head;          /* head of hash chain */
-    int bflush;              /* set if current block must be flushed */
-
-    /* Process the input block. */
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        hash_head = NIL;
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         */
-        s->prev_length = s->match_length, s->prev_match = s->match_start;
-        s->match_length = MIN_MATCH-1;
-
-        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
-            s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            s->match_length = longest_match (s, hash_head);
-            /* longest_match() sets match_start */
-
-            if (s->match_length <= 5 && (s->strategy == Z_FILTERED
-#if TOO_FAR <= 32767
-                || (s->match_length == MIN_MATCH &&
-                    s->strstart - s->match_start > TOO_FAR)
-#endif
-                )) {
-
-                /* If prev_match is also MIN_MATCH, match_start is garbage
-                 * but we will ignore the current match anyway.
-                 */
-                s->match_length = MIN_MATCH-1;
-            }
-        }
-        /* If there was a match at the previous step and the current
-         * match is not better, output the previous match:
-         */
-        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
-            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
-            /* Do not insert strings in hash table beyond this. */
-
-            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
-            _tr_tally_dist(s, s->strstart -1 - s->prev_match,
-                           s->prev_length - MIN_MATCH, bflush);
-
-            /* Insert in hash table all strings up to the end of the match.
-             * strstart-1 and strstart are already inserted. If there is not
-             * enough lookahead, the last two strings are not inserted in
-             * the hash table.
-             */
-            s->lookahead -= s->prev_length-1;
-            s->prev_length -= 2;
-            do {
-                if (++s->strstart <= max_insert) {
-                    INSERT_STRING(s, s->strstart, hash_head);
-                }
-            } while (--s->prev_length != 0);
-            s->match_available = 0;
-            s->match_length = MIN_MATCH-1;
-            s->strstart++;
-
-            if (bflush) FLUSH_BLOCK(s, 0);
-
-        } else if (s->match_available) {
-            /* If there was no match at the previous position, output a
-             * single literal. If there was a match but the current match
-             * is longer, truncate the previous match to a single literal.
-             */
-            Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            _tr_tally_lit(s, s->window[s->strstart-1], bflush);
-            if (bflush) {
-                FLUSH_BLOCK_ONLY(s, 0);
-            }
-            s->strstart++;
-            s->lookahead--;
-            if (s->strm->avail_out == 0) return need_more;
-        } else {
-            /* There is no previous match to compare with, wait for
-             * the next step to decide.
-             */
-            s->match_available = 1;
-            s->strstart++;
-            s->lookahead--;
-        }
-    }
-    Assert (flush != Z_NO_FLUSH, "no flush?");
-    if (s->match_available) {
-        Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        _tr_tally_lit(s, s->window[s->strstart-1], bflush);
-        s->match_available = 0;
-    }
-    s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
-        return finish_done;
-    }
-    if (s->last_lit)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
-}
-#endif /* FASTEST */
-
-/* ===========================================================================
- * For Z_RLE, simply look for runs of bytes, generate matches only of distance
- * one.  Do not maintain a hash table.  (It will be regenerated if this run of
- * deflate switches away from Z_RLE.)
- */
-local block_state deflate_rle(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    int bflush;             /* set if current block must be flushed */
-    uInt prev;              /* byte at distance one to match */
-    Bytef *scan, *strend;   /* scan goes up to strend for length of run */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the longest run, plus one for the unrolled loop.
-         */
-        if (s->lookahead <= MAX_MATCH) {
-            fill_window(s);
-            if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* See how many times the previous byte repeats */
-        s->match_length = 0;
-        if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
-            scan = s->window + s->strstart - 1;
-            prev = *scan;
-            if (prev == *++scan && prev == *++scan && prev == *++scan) {
-                strend = s->window + s->strstart + MAX_MATCH;
-                do {
-                } while (prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         scan < strend);
-                s->match_length = MAX_MATCH - (uInt)(strend - scan);
-                if (s->match_length > s->lookahead)
-                    s->match_length = s->lookahead;
-            }
-            Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan");
-        }
-
-        /* Emit match if have run of MIN_MATCH or longer, else emit literal */
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->strstart - 1, s->match_length);
-
-            _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
-
-            s->lookahead -= s->match_length;
-            s->strstart += s->match_length;
-            s->match_length = 0;
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            _tr_tally_lit (s, s->window[s->strstart], bflush);
-            s->lookahead--;
-            s->strstart++;
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    s->insert = 0;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
-        return finish_done;
-    }
-    if (s->last_lit)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
-}
-
-/* ===========================================================================
- * For Z_HUFFMAN_ONLY, do not look for matches.  Do not maintain a hash table.
- * (It will be regenerated if this run of deflate switches away from Huffman.)
- */
-local block_state deflate_huff(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    int bflush;             /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we have a literal to write. */
-        if (s->lookahead == 0) {
-            fill_window(s);
-            if (s->lookahead == 0) {
-                if (flush == Z_NO_FLUSH)
-                    return need_more;
-                break;      /* flush the current block */
-            }
-        }
-
-        /* Output a literal byte */
-        s->match_length = 0;
-        Tracevv((stderr,"%c", s->window[s->strstart]));
-        _tr_tally_lit (s, s->window[s->strstart], bflush);
-        s->lookahead--;
-        s->strstart++;
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    s->insert = 0;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
-        return finish_done;
-    }
-    if (s->last_lit)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
-}
diff --git a/Modules/zlib/deflate.h b/Modules/zlib/deflate.h
deleted file mode 100644
index 23ecdd3..0000000
--- a/Modules/zlib/deflate.h
+++ /dev/null
@@ -1,349 +0,0 @@
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-2016 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id$ */
-
-#ifndef DEFLATE_H
-#define DEFLATE_H
-
-#include "zutil.h"
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
-   trailer creation by deflate().  NO_GZIP would be used to avoid linking in
-   the crc code when it is not needed.  For shared libraries, gzip encoding
-   should be left enabled. */
-#ifndef NO_GZIP
-#  define GZIP
-#endif
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS  256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES   30
-/* number of distance codes */
-
-#define BL_CODES  19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define Buf_size 16
-/* size of bit buffer in bi_buf */
-
-#define INIT_STATE    42    /* zlib header -> BUSY_STATE */
-#ifdef GZIP
-#  define GZIP_STATE  57    /* gzip header -> BUSY_STATE | EXTRA_STATE */
-#endif
-#define EXTRA_STATE   69    /* gzip extra block -> NAME_STATE */
-#define NAME_STATE    73    /* gzip file name -> COMMENT_STATE */
-#define COMMENT_STATE 91    /* gzip comment -> HCRC_STATE */
-#define HCRC_STATE   103    /* gzip header CRC -> BUSY_STATE */
-#define BUSY_STATE   113    /* deflate -> FINISH_STATE */
-#define FINISH_STATE 666    /* stream complete */
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
-    union {
-        ush  freq;       /* frequency count */
-        ush  code;       /* bit string */
-    } fc;
-    union {
-        ush  dad;        /* father node in Huffman tree */
-        ush  len;        /* length of bit string */
-    } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad  dl.dad
-#define Len  dl.len
-
-typedef struct static_tree_desc_s  static_tree_desc;
-
-typedef struct tree_desc_s {
-    ct_data *dyn_tree;           /* the dynamic tree */
-    int     max_code;            /* largest code with non zero frequency */
-    const static_tree_desc *stat_desc;  /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct internal_state {
-    z_streamp strm;      /* pointer back to this zlib stream */
-    int   status;        /* as the name implies */
-    Bytef *pending_buf;  /* output still pending */
-    ulg   pending_buf_size; /* size of pending_buf */
-    Bytef *pending_out;  /* next pending byte to output to the stream */
-    ulg   pending;       /* nb of bytes in the pending buffer */
-    int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
-    gz_headerp  gzhead;  /* gzip header information to write */
-    ulg   gzindex;       /* where in extra, name, or comment */
-    Byte  method;        /* can only be DEFLATED */
-    int   last_flush;    /* value of flush param for previous deflate call */
-
-                /* used by deflate.c: */
-
-    uInt  w_size;        /* LZ77 window size (32K by default) */
-    uInt  w_bits;        /* log2(w_size)  (8..16) */
-    uInt  w_mask;        /* w_size - 1 */
-
-    Bytef *window;
-    /* Sliding window. Input bytes are read into the second half of the window,
-     * and move to the first half later to keep a dictionary of at least wSize
-     * bytes. With this organization, matches are limited to a distance of
-     * wSize-MAX_MATCH bytes, but this ensures that IO is always
-     * performed with a length multiple of the block size. Also, it limits
-     * the window size to 64K, which is quite useful on MSDOS.
-     * To do: use the user input buffer as sliding window.
-     */
-
-    ulg window_size;
-    /* Actual size of window: 2*wSize, except when the user input buffer
-     * is directly used as sliding window.
-     */
-
-    Posf *prev;
-    /* Link to older string with same hash index. To limit the size of this
-     * array to 64K, this link is maintained only for the last 32K strings.
-     * An index in this array is thus a window index modulo 32K.
-     */
-
-    Posf *head; /* Heads of the hash chains or NIL. */
-
-    uInt  ins_h;          /* hash index of string to be inserted */
-    uInt  hash_size;      /* number of elements in hash table */
-    uInt  hash_bits;      /* log2(hash_size) */
-    uInt  hash_mask;      /* hash_size-1 */
-
-    uInt  hash_shift;
-    /* Number of bits by which ins_h must be shifted at each input
-     * step. It must be such that after MIN_MATCH steps, the oldest
-     * byte no longer takes part in the hash key, that is:
-     *   hash_shift * MIN_MATCH >= hash_bits
-     */
-
-    long block_start;
-    /* Window position at the beginning of the current output block. Gets
-     * negative when the window is moved backwards.
-     */
-
-    uInt match_length;           /* length of best match */
-    IPos prev_match;             /* previous match */
-    int match_available;         /* set if previous match exists */
-    uInt strstart;               /* start of string to insert */
-    uInt match_start;            /* start of matching string */
-    uInt lookahead;              /* number of valid bytes ahead in window */
-
-    uInt prev_length;
-    /* Length of the best match at previous step. Matches not greater than this
-     * are discarded. This is used in the lazy match evaluation.
-     */
-
-    uInt max_chain_length;
-    /* To speed up deflation, hash chains are never searched beyond this
-     * length.  A higher limit improves compression ratio but degrades the
-     * speed.
-     */
-
-    uInt max_lazy_match;
-    /* Attempt to find a better match only when the current match is strictly
-     * smaller than this value. This mechanism is used only for compression
-     * levels >= 4.
-     */
-#   define max_insert_length  max_lazy_match
-    /* Insert new strings in the hash table only if the match length is not
-     * greater than this length. This saves time but degrades compression.
-     * max_insert_length is used only for compression levels <= 3.
-     */
-
-    int level;    /* compression level (1..9) */
-    int strategy; /* favor or force Huffman coding*/
-
-    uInt good_match;
-    /* Use a faster search when the previous match is longer than this */
-
-    int nice_match; /* Stop searching when current match exceeds this */
-
-                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to suppress compiler warning */
-    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
-    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
-    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
-
-    struct tree_desc_s l_desc;               /* desc. for literal tree */
-    struct tree_desc_s d_desc;               /* desc. for distance tree */
-    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
-
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
-    int heap_len;               /* number of elements in the heap */
-    int heap_max;               /* element of largest frequency */
-    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-     * The same heap array is used to build all trees.
-     */
-
-    uch depth[2*L_CODES+1];
-    /* Depth of each subtree used as tie breaker for trees of equal frequency
-     */
-
-    uchf *l_buf;          /* buffer for literals or lengths */
-
-    uInt  lit_bufsize;
-    /* Size of match buffer for literals/lengths.  There are 4 reasons for
-     * limiting lit_bufsize to 64K:
-     *   - frequencies can be kept in 16 bit counters
-     *   - if compression is not successful for the first block, all input
-     *     data is still in the window so we can still emit a stored block even
-     *     when input comes from standard input.  (This can also be done for
-     *     all blocks if lit_bufsize is not greater than 32K.)
-     *   - if compression is not successful for a file smaller than 64K, we can
-     *     even emit a stored file instead of a stored block (saving 5 bytes).
-     *     This is applicable only for zip (not gzip or zlib).
-     *   - creating new Huffman trees less frequently may not provide fast
-     *     adaptation to changes in the input data statistics. (Take for
-     *     example a binary file with poorly compressible code followed by
-     *     a highly compressible string table.) Smaller buffer sizes give
-     *     fast adaptation but have of course the overhead of transmitting
-     *     trees more frequently.
-     *   - I can't count above 4
-     */
-
-    uInt last_lit;      /* running index in l_buf */
-
-    ushf *d_buf;
-    /* Buffer for distances. To simplify the code, d_buf and l_buf have
-     * the same number of elements. To use different lengths, an extra flag
-     * array would be necessary.
-     */
-
-    ulg opt_len;        /* bit length of current block with optimal trees */
-    ulg static_len;     /* bit length of current block with static trees */
-    uInt matches;       /* number of string matches in current block */
-    uInt insert;        /* bytes at end of window left to insert */
-
-#ifdef ZLIB_DEBUG
-    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
-    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
-#endif
-
-    ush bi_buf;
-    /* Output buffer. bits are inserted starting at the bottom (least
-     * significant bits).
-     */
-    int bi_valid;
-    /* Number of valid bits in bi_buf.  All bits above the last valid bit
-     * are always zero.
-     */
-
-    ulg high_water;
-    /* High water mark offset in window for initialized bytes -- bytes above
-     * this are set to zero in order to avoid memory check warnings when
-     * longest match routines access bytes past the input.  This is then
-     * updated to the new high water mark.
-     */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (Bytef)(c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-#define WIN_INIT MAX_MATCH
-/* Number of bytes after end of data in window to initialize in order to avoid
-   memory checker errors from longest match routines */
-
-        /* in trees.c */
-void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
-int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-
-#define d_code(dist) \
-   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. _dist_code[256] and _dist_code[257] are never
- * used.
- */
-
-#ifndef ZLIB_DEBUG
-/* Inline versions of _tr_tally for speed: */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
-  extern uch ZLIB_INTERNAL _length_code[];
-  extern uch ZLIB_INTERNAL _dist_code[];
-#else
-  extern const uch ZLIB_INTERNAL _length_code[];
-  extern const uch ZLIB_INTERNAL _dist_code[];
-#endif
-
-# define _tr_tally_lit(s, c, flush) \
-  { uch cc = (c); \
-    s->d_buf[s->last_lit] = 0; \
-    s->l_buf[s->last_lit++] = cc; \
-    s->dyn_ltree[cc].Freq++; \
-    flush = (s->last_lit == s->lit_bufsize-1); \
-   }
-# define _tr_tally_dist(s, distance, length, flush) \
-  { uch len = (uch)(length); \
-    ush dist = (ush)(distance); \
-    s->d_buf[s->last_lit] = dist; \
-    s->l_buf[s->last_lit++] = len; \
-    dist--; \
-    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
-    s->dyn_dtree[d_code(dist)].Freq++; \
-    flush = (s->last_lit == s->lit_bufsize-1); \
-  }
-#else
-# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
-# define _tr_tally_dist(s, distance, length, flush) \
-              flush = _tr_tally(s, distance, length)
-#endif
-
-#endif /* DEFLATE_H */
diff --git a/Modules/zlib/example.c b/Modules/zlib/example.c
deleted file mode 100644
index 138a699..0000000
--- a/Modules/zlib/example.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-2006, 2011 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zlib.h"
-#include <stdio.h>
-
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-
-#if defined(VMS) || defined(RISCOS)
-#  define TESTFILE "foo-gz"
-#else
-#  define TESTFILE "foo.gz"
-#endif
-
-#define CHECK_ERR(err, msg) { \
-    if (err != Z_OK) { \
-        fprintf(stderr, "%s error: %d\n", msg, err); \
-        exit(1); \
-    } \
-}
-
-z_const char hello[] = "hello, hello!";
-/* "hello world" would be more standard, but the repeated "hello"
- * stresses the compression code better, sorry...
- */
-
-const char dictionary[] = "hello";
-uLong dictId; /* Adler32 value of the dictionary */
-
-void test_deflate       OF((Byte *compr, uLong comprLen));
-void test_inflate       OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_large_deflate OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_large_inflate OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_flush         OF((Byte *compr, uLong *comprLen));
-void test_sync          OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_dict_deflate  OF((Byte *compr, uLong comprLen));
-void test_dict_inflate  OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-int  main               OF((int argc, char *argv[]));
-
-
-#ifdef Z_SOLO
-
-void *myalloc OF((void *, unsigned, unsigned));
-void myfree OF((void *, void *));
-
-void *myalloc(q, n, m)
-    void *q;
-    unsigned n, m;
-{
-    q = Z_NULL;
-    return calloc(n, m);
-}
-
-void myfree(void *q, void *p)
-{
-    q = Z_NULL;
-    free(p);
-}
-
-static alloc_func zalloc = myalloc;
-static free_func zfree = myfree;
-
-#else /* !Z_SOLO */
-
-static alloc_func zalloc = (alloc_func)0;
-static free_func zfree = (free_func)0;
-
-void test_compress      OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_gzio          OF((const char *fname,
-                            Byte *uncompr, uLong uncomprLen));
-
-/* ===========================================================================
- * Test compress() and uncompress()
- */
-void test_compress(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    uLong len = (uLong)strlen(hello)+1;
-
-    err = compress(compr, &comprLen, (const Bytef*)hello, len);
-    CHECK_ERR(err, "compress");
-
-    strcpy((char*)uncompr, "garbage");
-
-    err = uncompress(uncompr, &uncomprLen, compr, comprLen);
-    CHECK_ERR(err, "uncompress");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad uncompress\n");
-        exit(1);
-    } else {
-        printf("uncompress(): %s\n", (char *)uncompr);
-    }
-}
-
-/* ===========================================================================
- * Test read/write of .gz files
- */
-void test_gzio(fname, uncompr, uncomprLen)
-    const char *fname; /* compressed file name */
-    Byte *uncompr;
-    uLong uncomprLen;
-{
-#ifdef NO_GZCOMPRESS
-    fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n");
-#else
-    int err;
-    int len = (int)strlen(hello)+1;
-    gzFile file;
-    z_off_t pos;
-
-    file = gzopen(fname, "wb");
-    if (file == NULL) {
-        fprintf(stderr, "gzopen error\n");
-        exit(1);
-    }
-    gzputc(file, 'h');
-    if (gzputs(file, "ello") != 4) {
-        fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    if (gzprintf(file, ", %s!", "hello") != 8) {
-        fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
-    gzclose(file);
-
-    file = gzopen(fname, "rb");
-    if (file == NULL) {
-        fprintf(stderr, "gzopen error\n");
-        exit(1);
-    }
-    strcpy((char*)uncompr, "garbage");
-
-    if (gzread(file, uncompr, (unsigned)uncomprLen) != len) {
-        fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
-        exit(1);
-    } else {
-        printf("gzread(): %s\n", (char*)uncompr);
-    }
-
-    pos = gzseek(file, -8L, SEEK_CUR);
-    if (pos != 6 || gztell(file) != pos) {
-        fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
-                (long)pos, (long)gztell(file));
-        exit(1);
-    }
-
-    if (gzgetc(file) != ' ') {
-        fprintf(stderr, "gzgetc error\n");
-        exit(1);
-    }
-
-    if (gzungetc(' ', file) != ' ') {
-        fprintf(stderr, "gzungetc error\n");
-        exit(1);
-    }
-
-    gzgets(file, (char*)uncompr, (int)uncomprLen);
-    if (strlen((char*)uncompr) != 7) { /* " hello!" */
-        fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    if (strcmp((char*)uncompr, hello + 6)) {
-        fprintf(stderr, "bad gzgets after gzseek\n");
-        exit(1);
-    } else {
-        printf("gzgets() after gzseek: %s\n", (char*)uncompr);
-    }
-
-    gzclose(file);
-#endif
-}
-
-#endif /* Z_SOLO */
-
-/* ===========================================================================
- * Test deflate() with small buffers
- */
-void test_deflate(compr, comprLen)
-    Byte *compr;
-    uLong comprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-    uLong len = (uLong)strlen(hello)+1;
-
-    c_stream.zalloc = zalloc;
-    c_stream.zfree = zfree;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_in  = (z_const unsigned char *)hello;
-    c_stream.next_out = compr;
-
-    while (c_stream.total_in != len && c_stream.total_out < comprLen) {
-        c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
-        err = deflate(&c_stream, Z_NO_FLUSH);
-        CHECK_ERR(err, "deflate");
-    }
-    /* Finish the stream, still forcing small buffers: */
-    for (;;) {
-        c_stream.avail_out = 1;
-        err = deflate(&c_stream, Z_FINISH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "deflate");
-    }
-
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with small buffers
- */
-void test_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = zalloc;
-    d_stream.zfree = zfree;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = 0;
-    d_stream.next_out = uncompr;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
-        d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "inflate");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad inflate\n");
-        exit(1);
-    } else {
-        printf("inflate(): %s\n", (char *)uncompr);
-    }
-}
-
-/* ===========================================================================
- * Test deflate() with large buffers and dynamic change of compression level
- */
-void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-
-    c_stream.zalloc = zalloc;
-    c_stream.zfree = zfree;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_BEST_SPEED);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_out = compr;
-    c_stream.avail_out = (uInt)comprLen;
-
-    /* At this point, uncompr is still mostly zeroes, so it should compress
-     * very well:
-     */
-    c_stream.next_in = uncompr;
-    c_stream.avail_in = (uInt)uncomprLen;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-    if (c_stream.avail_in != 0) {
-        fprintf(stderr, "deflate not greedy\n");
-        exit(1);
-    }
-
-    /* Feed in already compressed data and switch to no compression: */
-    deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
-    c_stream.next_in = compr;
-    c_stream.avail_in = (uInt)comprLen/2;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    /* Switch back to compressing mode: */
-    deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
-    c_stream.next_in = uncompr;
-    c_stream.avail_in = (uInt)uncomprLen;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        fprintf(stderr, "deflate should report Z_STREAM_END\n");
-        exit(1);
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with large buffers
- */
-void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = zalloc;
-    d_stream.zfree = zfree;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = (uInt)comprLen;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    for (;;) {
-        d_stream.next_out = uncompr;            /* discard the output */
-        d_stream.avail_out = (uInt)uncomprLen;
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "large inflate");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
-        fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
-        exit(1);
-    } else {
-        printf("large_inflate(): OK\n");
-    }
-}
-
-/* ===========================================================================
- * Test deflate() with full flush
- */
-void test_flush(compr, comprLen)
-    Byte *compr;
-    uLong *comprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-    uInt len = (uInt)strlen(hello)+1;
-
-    c_stream.zalloc = zalloc;
-    c_stream.zfree = zfree;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_in  = (z_const unsigned char *)hello;
-    c_stream.next_out = compr;
-    c_stream.avail_in = 3;
-    c_stream.avail_out = (uInt)*comprLen;
-    err = deflate(&c_stream, Z_FULL_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    compr[3]++; /* force an error in first compressed block */
-    c_stream.avail_in = len - 3;
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        CHECK_ERR(err, "deflate");
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-
-    *comprLen = c_stream.total_out;
-}
-
-/* ===========================================================================
- * Test inflateSync()
- */
-void test_sync(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = zalloc;
-    d_stream.zfree = zfree;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = 2; /* just read the zlib header */
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    d_stream.next_out = uncompr;
-    d_stream.avail_out = (uInt)uncomprLen;
-
-    inflate(&d_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "inflate");
-
-    d_stream.avail_in = (uInt)comprLen-2;   /* read all compressed data */
-    err = inflateSync(&d_stream);           /* but skip the damaged part */
-    CHECK_ERR(err, "inflateSync");
-
-    err = inflate(&d_stream, Z_FINISH);
-    if (err != Z_DATA_ERROR) {
-        fprintf(stderr, "inflate should report DATA_ERROR\n");
-        /* Because of incorrect adler32 */
-        exit(1);
-    }
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    printf("after inflateSync(): hel%s\n", (char *)uncompr);
-}
-
-/* ===========================================================================
- * Test deflate() with preset dictionary
- */
-void test_dict_deflate(compr, comprLen)
-    Byte *compr;
-    uLong comprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-
-    c_stream.zalloc = zalloc;
-    c_stream.zfree = zfree;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    err = deflateSetDictionary(&c_stream,
-                (const Bytef*)dictionary, (int)sizeof(dictionary));
-    CHECK_ERR(err, "deflateSetDictionary");
-
-    dictId = c_stream.adler;
-    c_stream.next_out = compr;
-    c_stream.avail_out = (uInt)comprLen;
-
-    c_stream.next_in = (z_const unsigned char *)hello;
-    c_stream.avail_in = (uInt)strlen(hello)+1;
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        fprintf(stderr, "deflate should report Z_STREAM_END\n");
-        exit(1);
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with a preset dictionary
- */
-void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = zalloc;
-    d_stream.zfree = zfree;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = (uInt)comprLen;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    d_stream.next_out = uncompr;
-    d_stream.avail_out = (uInt)uncomprLen;
-
-    for (;;) {
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        if (err == Z_NEED_DICT) {
-            if (d_stream.adler != dictId) {
-                fprintf(stderr, "unexpected dictionary");
-                exit(1);
-            }
-            err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
-                                       (int)sizeof(dictionary));
-        }
-        CHECK_ERR(err, "inflate with dict");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad inflate with dict\n");
-        exit(1);
-    } else {
-        printf("inflate with dictionary: %s\n", (char *)uncompr);
-    }
-}
-
-/* ===========================================================================
- * Usage:  example [output.gz  [input.gz]]
- */
-
-int main(argc, argv)
-    int argc;
-    char *argv[];
-{
-    Byte *compr, *uncompr;
-    uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
-    uLong uncomprLen = comprLen;
-    static const char* myVersion = ZLIB_VERSION;
-
-    if (zlibVersion()[0] != myVersion[0]) {
-        fprintf(stderr, "incompatible zlib version\n");
-        exit(1);
-
-    } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
-        fprintf(stderr, "warning: different zlib version\n");
-    }
-
-    printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n",
-            ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags());
-
-    compr    = (Byte*)calloc((uInt)comprLen, 1);
-    uncompr  = (Byte*)calloc((uInt)uncomprLen, 1);
-    /* compr and uncompr are cleared to avoid reading uninitialized
-     * data and to ensure that uncompr compresses well.
-     */
-    if (compr == Z_NULL || uncompr == Z_NULL) {
-        printf("out of memory\n");
-        exit(1);
-    }
-
-#ifdef Z_SOLO
-    argc = strlen(argv[0]);
-#else
-    test_compress(compr, comprLen, uncompr, uncomprLen);
-
-    test_gzio((argc > 1 ? argv[1] : TESTFILE),
-              uncompr, uncomprLen);
-#endif
-
-    test_deflate(compr, comprLen);
-    test_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    test_large_deflate(compr, comprLen, uncompr, uncomprLen);
-    test_large_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    test_flush(compr, &comprLen);
-    test_sync(compr, comprLen, uncompr, uncomprLen);
-    comprLen = uncomprLen;
-
-    test_dict_deflate(compr, comprLen);
-    test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    free(compr);
-    free(uncompr);
-
-    return 0;
-}
diff --git a/Modules/zlib/gzclose.c b/Modules/zlib/gzclose.c
deleted file mode 100644
index caeb99a..0000000
--- a/Modules/zlib/gzclose.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* gzclose.c -- zlib gzclose() function
- * Copyright (C) 2004, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* gzclose() is in a separate file so that it is linked in only if it is used.
-   That way the other gzclose functions can be used instead to avoid linking in
-   unneeded compression or decompression routines. */
-int ZEXPORT gzclose(file)
-    gzFile file;
-{
-#ifndef NO_GZCOMPRESS
-    gz_statep state;
-
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
-#else
-    return gzclose_r(file);
-#endif
-}
diff --git a/Modules/zlib/gzguts.h b/Modules/zlib/gzguts.h
deleted file mode 100644
index 990a4d2..0000000
--- a/Modules/zlib/gzguts.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/* gzguts.h -- zlib internal header definitions for gz* operations
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#ifdef _LARGEFILE64_SOURCE
-#  ifndef _LARGEFILE_SOURCE
-#    define _LARGEFILE_SOURCE 1
-#  endif
-#  ifdef _FILE_OFFSET_BITS
-#    undef _FILE_OFFSET_BITS
-#  endif
-#endif
-
-#ifdef HAVE_HIDDEN
-#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-#else
-#  define ZLIB_INTERNAL
-#endif
-
-#include <stdio.h>
-#include "zlib.h"
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#  include <limits.h>
-#endif
-
-#ifndef _POSIX_SOURCE
-#  define _POSIX_SOURCE
-#endif
-#include <fcntl.h>
-
-#ifdef _WIN32
-#  include <stddef.h>
-#endif
-
-#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
-#  include <io.h>
-#endif
-
-#if defined(_WIN32) || defined(__CYGWIN__)
-#  define WIDECHAR
-#endif
-
-#ifdef WINAPI_FAMILY
-#  define open _open
-#  define read _read
-#  define write _write
-#  define close _close
-#endif
-
-#ifdef NO_DEFLATE       /* for compatibility with old definition */
-#  define NO_GZCOMPRESS
-#endif
-
-#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
-#  ifndef HAVE_VSNPRINTF
-#    define HAVE_VSNPRINTF
-#  endif
-#endif
-
-#if defined(__CYGWIN__)
-#  ifndef HAVE_VSNPRINTF
-#    define HAVE_VSNPRINTF
-#  endif
-#endif
-
-#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
-#  ifndef HAVE_VSNPRINTF
-#    define HAVE_VSNPRINTF
-#  endif
-#endif
-
-#ifndef HAVE_VSNPRINTF
-#  ifdef MSDOS
-/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
-   but for now we just assume it doesn't. */
-#    define NO_vsnprintf
-#  endif
-#  ifdef __TURBOC__
-#    define NO_vsnprintf
-#  endif
-#  ifdef WIN32
-/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
-#    if !defined(vsnprintf) && !defined(NO_vsnprintf)
-#      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
-#         define vsnprintf _vsnprintf
-#      endif
-#    endif
-#  endif
-#  ifdef __SASC
-#    define NO_vsnprintf
-#  endif
-#  ifdef VMS
-#    define NO_vsnprintf
-#  endif
-#  ifdef __OS400__
-#    define NO_vsnprintf
-#  endif
-#  ifdef __MVS__
-#    define NO_vsnprintf
-#  endif
-#endif
-
-/* unlike snprintf (which is required in C99), _snprintf does not guarantee
-   null termination of the result -- however this is only used in gzlib.c where
-   the result is assured to fit in the space provided */
-#if defined(_MSC_VER) && _MSC_VER < 1900
-#  define snprintf _snprintf
-#endif
-
-#ifndef local
-#  define local static
-#endif
-/* since "static" is used to mean two completely different things in C, we
-   define "local" for the non-static meaning of "static", for readability
-   (compile with -Dlocal if your debugger can't find static symbols) */
-
-/* gz* functions always use library allocation functions */
-#ifndef STDC
-  extern voidp  malloc OF((uInt size));
-  extern void   free   OF((voidpf ptr));
-#endif
-
-/* get errno and strerror definition */
-#if defined UNDER_CE
-#  include <windows.h>
-#  define zstrerror() gz_strwinerror((DWORD)GetLastError())
-#else
-#  ifndef NO_STRERROR
-#    include <errno.h>
-#    define zstrerror() strerror(errno)
-#  else
-#    define zstrerror() "stdio error (consult errno)"
-#  endif
-#endif
-
-/* provide prototypes for these when building zlib without LFS */
-#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
-    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
-    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
-    ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
-#endif
-
-/* default memLevel */
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-
-/* default i/o buffer size -- double this for output when reading (this and
-   twice this must be able to fit in an unsigned type) */
-#define GZBUFSIZE 8192
-
-/* gzip modes, also provide a little integrity check on the passed structure */
-#define GZ_NONE 0
-#define GZ_READ 7247
-#define GZ_WRITE 31153
-#define GZ_APPEND 1     /* mode set to GZ_WRITE after the file is opened */
-
-/* values for gz_state how */
-#define LOOK 0      /* look for a gzip header */
-#define COPY 1      /* copy input directly */
-#define GZIP 2      /* decompress a gzip stream */
-
-/* internal gzip file state data structure */
-typedef struct {
-        /* exposed contents for gzgetc() macro */
-    struct gzFile_s x;      /* "x" for exposed */
-                            /* x.have: number of bytes available at x.next */
-                            /* x.next: next output data to deliver or write */
-                            /* x.pos: current position in uncompressed data */
-        /* used for both reading and writing */
-    int mode;               /* see gzip modes above */
-    int fd;                 /* file descriptor */
-    char *path;             /* path or fd for error messages */
-    unsigned size;          /* buffer size, zero if not allocated yet */
-    unsigned want;          /* requested buffer size, default is GZBUFSIZE */
-    unsigned char *in;      /* input buffer (double-sized when writing) */
-    unsigned char *out;     /* output buffer (double-sized when reading) */
-    int direct;             /* 0 if processing gzip, 1 if transparent */
-        /* just for reading */
-    int how;                /* 0: get header, 1: copy, 2: decompress */
-    z_off64_t start;        /* where the gzip data started, for rewinding */
-    int eof;                /* true if end of input file reached */
-    int past;               /* true if read requested past end */
-        /* just for writing */
-    int level;              /* compression level */
-    int strategy;           /* compression strategy */
-        /* seek request */
-    z_off64_t skip;         /* amount to skip (already rewound if backwards) */
-    int seek;               /* true if seek request pending */
-        /* error information */
-    int err;                /* error code */
-    char *msg;              /* error message */
-        /* zlib inflate or deflate stream */
-    z_stream strm;          /* stream structure in-place (not a pointer) */
-} gz_state;
-typedef gz_state FAR *gz_statep;
-
-/* shared functions */
-void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
-#if defined UNDER_CE
-char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
-#endif
-
-/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
-   value -- needed when comparing unsigned to z_off64_t, which is signed
-   (possible z_off64_t types off_t, off64_t, and long are all signed) */
-#ifdef INT_MAX
-#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
-#else
-unsigned ZLIB_INTERNAL gz_intmax OF((void));
-#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
-#endif
diff --git a/Modules/zlib/gzlib.c b/Modules/zlib/gzlib.c
deleted file mode 100644
index 4105e6a..0000000
--- a/Modules/zlib/gzlib.c
+++ /dev/null
@@ -1,637 +0,0 @@
-/* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004-2017 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-#if defined(_WIN32) && !defined(__BORLANDC__) && !defined(__MINGW32__)
-#  define LSEEK _lseeki64
-#else
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-#  define LSEEK lseek64
-#else
-#  define LSEEK lseek
-#endif
-#endif
-
-/* Local functions */
-local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const void *, int, const char *));
-
-#if defined UNDER_CE
-
-/* Map the Windows error number in ERROR to a locale-dependent error message
-   string and return a pointer to it.  Typically, the values for ERROR come
-   from GetLastError.
-
-   The string pointed to shall not be modified by the application, but may be
-   overwritten by a subsequent call to gz_strwinerror
-
-   The gz_strwinerror function does not change the current setting of
-   GetLastError. */
-char ZLIB_INTERNAL *gz_strwinerror (error)
-     DWORD error;
-{
-    static char buf[1024];
-
-    wchar_t *msgbuf;
-    DWORD lasterr = GetLastError();
-    DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
-        | FORMAT_MESSAGE_ALLOCATE_BUFFER,
-        NULL,
-        error,
-        0, /* Default language */
-        (LPVOID)&msgbuf,
-        0,
-        NULL);
-    if (chars != 0) {
-        /* If there is an \r\n appended, zap it.  */
-        if (chars >= 2
-            && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
-            chars -= 2;
-            msgbuf[chars] = 0;
-        }
-
-        if (chars > sizeof (buf) - 1) {
-            chars = sizeof (buf) - 1;
-            msgbuf[chars] = 0;
-        }
-
-        wcstombs(buf, msgbuf, chars + 1);
-        LocalFree(msgbuf);
-    }
-    else {
-        sprintf(buf, "unknown win32 error (%ld)", error);
-    }
-
-    SetLastError(lasterr);
-    return buf;
-}
-
-#endif /* UNDER_CE */
-
-/* Reset gzip file state */
-local void gz_reset(state)
-    gz_statep state;
-{
-    state->x.have = 0;              /* no output data available */
-    if (state->mode == GZ_READ) {   /* for reading ... */
-        state->eof = 0;             /* not at end of file */
-        state->past = 0;            /* have not read past end yet */
-        state->how = LOOK;          /* look for gzip header */
-    }
-    state->seek = 0;                /* no seek request pending */
-    gz_error(state, Z_OK, NULL);    /* clear error */
-    state->x.pos = 0;               /* no uncompressed data yet */
-    state->strm.avail_in = 0;       /* no input data yet */
-}
-
-/* Open a gzip file either by name or file descriptor. */
-local gzFile gz_open(path, fd, mode)
-    const void *path;
-    int fd;
-    const char *mode;
-{
-    gz_statep state;
-    z_size_t len;
-    int oflag;
-#ifdef O_CLOEXEC
-    int cloexec = 0;
-#endif
-#ifdef O_EXCL
-    int exclusive = 0;
-#endif
-
-    /* check input */
-    if (path == NULL)
-        return NULL;
-
-    /* allocate gzFile structure to return */
-    state = (gz_statep)malloc(sizeof(gz_state));
-    if (state == NULL)
-        return NULL;
-    state->size = 0;            /* no buffers allocated yet */
-    state->want = GZBUFSIZE;    /* requested buffer size */
-    state->msg = NULL;          /* no error message yet */
-
-    /* interpret mode */
-    state->mode = GZ_NONE;
-    state->level = Z_DEFAULT_COMPRESSION;
-    state->strategy = Z_DEFAULT_STRATEGY;
-    state->direct = 0;
-    while (*mode) {
-        if (*mode >= '0' && *mode <= '9')
-            state->level = *mode - '0';
-        else
-            switch (*mode) {
-            case 'r':
-                state->mode = GZ_READ;
-                break;
-#ifndef NO_GZCOMPRESS
-            case 'w':
-                state->mode = GZ_WRITE;
-                break;
-            case 'a':
-                state->mode = GZ_APPEND;
-                break;
-#endif
-            case '+':       /* can't read and write at the same time */
-                free(state);
-                return NULL;
-            case 'b':       /* ignore -- will request binary anyway */
-                break;
-#ifdef O_CLOEXEC
-            case 'e':
-                cloexec = 1;
-                break;
-#endif
-#ifdef O_EXCL
-            case 'x':
-                exclusive = 1;
-                break;
-#endif
-            case 'f':
-                state->strategy = Z_FILTERED;
-                break;
-            case 'h':
-                state->strategy = Z_HUFFMAN_ONLY;
-                break;
-            case 'R':
-                state->strategy = Z_RLE;
-                break;
-            case 'F':
-                state->strategy = Z_FIXED;
-                break;
-            case 'T':
-                state->direct = 1;
-                break;
-            default:        /* could consider as an error, but just ignore */
-                ;
-            }
-        mode++;
-    }
-
-    /* must provide an "r", "w", or "a" */
-    if (state->mode == GZ_NONE) {
-        free(state);
-        return NULL;
-    }
-
-    /* can't force transparent read */
-    if (state->mode == GZ_READ) {
-        if (state->direct) {
-            free(state);
-            return NULL;
-        }
-        state->direct = 1;      /* for empty file */
-    }
-
-    /* save the path name for error messages */
-#ifdef WIDECHAR
-    if (fd == -2) {
-        len = wcstombs(NULL, path, 0);
-        if (len == (z_size_t)-1)
-            len = 0;
-    }
-    else
-#endif
-        len = strlen((const char *)path);
-    state->path = (char *)malloc(len + 1);
-    if (state->path == NULL) {
-        free(state);
-        return NULL;
-    }
-#ifdef WIDECHAR
-    if (fd == -2)
-        if (len)
-            wcstombs(state->path, path, len + 1);
-        else
-            *(state->path) = 0;
-    else
-#endif
-#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
-        (void)snprintf(state->path, len + 1, "%s", (const char *)path);
-#else
-        strcpy(state->path, path);
-#endif
-
-    /* compute the flags for open() */
-    oflag =
-#ifdef O_LARGEFILE
-        O_LARGEFILE |
-#endif
-#ifdef O_BINARY
-        O_BINARY |
-#endif
-#ifdef O_CLOEXEC
-        (cloexec ? O_CLOEXEC : 0) |
-#endif
-        (state->mode == GZ_READ ?
-         O_RDONLY :
-         (O_WRONLY | O_CREAT |
-#ifdef O_EXCL
-          (exclusive ? O_EXCL : 0) |
-#endif
-          (state->mode == GZ_WRITE ?
-           O_TRUNC :
-           O_APPEND)));
-
-    /* open the file with the appropriate flags (or just use fd) */
-    state->fd = fd > -1 ? fd : (
-#ifdef WIDECHAR
-        fd == -2 ? _wopen(path, oflag, 0666) :
-#endif
-        open((const char *)path, oflag, 0666));
-    if (state->fd == -1) {
-        free(state->path);
-        free(state);
-        return NULL;
-    }
-    if (state->mode == GZ_APPEND) {
-        LSEEK(state->fd, 0, SEEK_END);  /* so gzoffset() is correct */
-        state->mode = GZ_WRITE;         /* simplify later checks */
-    }
-
-    /* save the current position for rewinding (only if reading) */
-    if (state->mode == GZ_READ) {
-        state->start = LSEEK(state->fd, 0, SEEK_CUR);
-        if (state->start == -1) state->start = 0;
-    }
-
-    /* initialize stream */
-    gz_reset(state);
-
-    /* return stream */
-    return (gzFile)state;
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzopen(path, mode)
-    const char *path;
-    const char *mode;
-{
-    return gz_open(path, -1, mode);
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzopen64(path, mode)
-    const char *path;
-    const char *mode;
-{
-    return gz_open(path, -1, mode);
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzdopen(fd, mode)
-    int fd;
-    const char *mode;
-{
-    char *path;         /* identifier for error messages */
-    gzFile gz;
-
-    if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL)
-        return NULL;
-#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
-    (void)snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd);
-#else
-    sprintf(path, "<fd:%d>", fd);   /* for debugging */
-#endif
-    gz = gz_open(path, fd, mode);
-    free(path);
-    return gz;
-}
-
-/* -- see zlib.h -- */
-#ifdef WIDECHAR
-gzFile ZEXPORT gzopen_w(path, mode)
-    const wchar_t *path;
-    const char *mode;
-{
-    return gz_open(path, -2, mode);
-}
-#endif
-
-/* -- see zlib.h -- */
-int ZEXPORT gzbuffer(file, size)
-    gzFile file;
-    unsigned size;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* make sure we haven't already allocated memory */
-    if (state->size != 0)
-        return -1;
-
-    /* check and set requested size */
-    if ((size << 1) < size)
-        return -1;              /* need to be able to double it */
-    if (size < 2)
-        size = 2;               /* need two bytes to check magic header */
-    state->want = size;
-    return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzrewind(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no error */
-    if (state->mode != GZ_READ ||
-            (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return -1;
-
-    /* back up and start over */
-    if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
-        return -1;
-    gz_reset(state);
-    return 0;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gzseek64(file, offset, whence)
-    gzFile file;
-    z_off64_t offset;
-    int whence;
-{
-    unsigned n;
-    z_off64_t ret;
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* check that there's no error */
-    if (state->err != Z_OK && state->err != Z_BUF_ERROR)
-        return -1;
-
-    /* can only seek from start or relative to current position */
-    if (whence != SEEK_SET && whence != SEEK_CUR)
-        return -1;
-
-    /* normalize offset to a SEEK_CUR specification */
-    if (whence == SEEK_SET)
-        offset -= state->x.pos;
-    else if (state->seek)
-        offset += state->skip;
-    state->seek = 0;
-
-    /* if within raw area while reading, just go there */
-    if (state->mode == GZ_READ && state->how == COPY &&
-            state->x.pos + offset >= 0) {
-        ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR);
-        if (ret == -1)
-            return -1;
-        state->x.have = 0;
-        state->eof = 0;
-        state->past = 0;
-        state->seek = 0;
-        gz_error(state, Z_OK, NULL);
-        state->strm.avail_in = 0;
-        state->x.pos += offset;
-        return state->x.pos;
-    }
-
-    /* calculate skip amount, rewinding if needed for back seek when reading */
-    if (offset < 0) {
-        if (state->mode != GZ_READ)         /* writing -- can't go backwards */
-            return -1;
-        offset += state->x.pos;
-        if (offset < 0)                     /* before start of file! */
-            return -1;
-        if (gzrewind(file) == -1)           /* rewind, then skip to offset */
-            return -1;
-    }
-
-    /* if reading, skip what's in output buffer (one less gzgetc() check) */
-    if (state->mode == GZ_READ) {
-        n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ?
-            (unsigned)offset : state->x.have;
-        state->x.have -= n;
-        state->x.next += n;
-        state->x.pos += n;
-        offset -= n;
-    }
-
-    /* request skip (if not zero) */
-    if (offset) {
-        state->seek = 1;
-        state->skip = offset;
-    }
-    return state->x.pos + offset;
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gzseek(file, offset, whence)
-    gzFile file;
-    z_off_t offset;
-    int whence;
-{
-    z_off64_t ret;
-
-    ret = gzseek64(file, (z_off64_t)offset, whence);
-    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gztell64(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* return position */
-    return state->x.pos + (state->seek ? state->skip : 0);
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gztell(file)
-    gzFile file;
-{
-    z_off64_t ret;
-
-    ret = gztell64(file);
-    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gzoffset64(file)
-    gzFile file;
-{
-    z_off64_t offset;
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* compute and return effective offset in file */
-    offset = LSEEK(state->fd, 0, SEEK_CUR);
-    if (offset == -1)
-        return -1;
-    if (state->mode == GZ_READ)             /* reading */
-        offset -= state->strm.avail_in;     /* don't count buffered input */
-    return offset;
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gzoffset(file)
-    gzFile file;
-{
-    z_off64_t ret;
-
-    ret = gzoffset64(file);
-    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzeof(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return 0;
-
-    /* return end-of-file state */
-    return state->mode == GZ_READ ? state->past : 0;
-}
-
-/* -- see zlib.h -- */
-const char * ZEXPORT gzerror(file, errnum)
-    gzFile file;
-    int *errnum;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return NULL;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return NULL;
-
-    /* return error information */
-    if (errnum != NULL)
-        *errnum = state->err;
-    return state->err == Z_MEM_ERROR ? "out of memory" :
-                                       (state->msg == NULL ? "" : state->msg);
-}
-
-/* -- see zlib.h -- */
-void ZEXPORT gzclearerr(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return;
-
-    /* clear error and end-of-file */
-    if (state->mode == GZ_READ) {
-        state->eof = 0;
-        state->past = 0;
-    }
-    gz_error(state, Z_OK, NULL);
-}
-
-/* Create an error message in allocated memory and set state->err and
-   state->msg accordingly.  Free any previous error message already there.  Do
-   not try to free or allocate space if the error is Z_MEM_ERROR (out of
-   memory).  Simply save the error message as a static string.  If there is an
-   allocation failure constructing the error message, then convert the error to
-   out of memory. */
-void ZLIB_INTERNAL gz_error(state, err, msg)
-    gz_statep state;
-    int err;
-    const char *msg;
-{
-    /* free previously allocated message and clear */
-    if (state->msg != NULL) {
-        if (state->err != Z_MEM_ERROR)
-            free(state->msg);
-        state->msg = NULL;
-    }
-
-    /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */
-    if (err != Z_OK && err != Z_BUF_ERROR)
-        state->x.have = 0;
-
-    /* set error code, and if no message, then done */
-    state->err = err;
-    if (msg == NULL)
-        return;
-
-    /* for an out of memory error, return literal string when requested */
-    if (err == Z_MEM_ERROR)
-        return;
-
-    /* construct error message with path */
-    if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) ==
-            NULL) {
-        state->err = Z_MEM_ERROR;
-        return;
-    }
-#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
-    (void)snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
-                   "%s%s%s", state->path, ": ", msg);
-#else
-    strcpy(state->msg, state->path);
-    strcat(state->msg, ": ");
-    strcat(state->msg, msg);
-#endif
-}
-
-#ifndef INT_MAX
-/* portably return maximum value for an int (when limits.h presumed not
-   available) -- we need to do this to cover cases where 2's complement not
-   used, since C standard permits 1's complement and sign-bit representations,
-   otherwise we could just use ((unsigned)-1) >> 1 */
-unsigned ZLIB_INTERNAL gz_intmax()
-{
-    unsigned p, q;
-
-    p = 1;
-    do {
-        q = p;
-        p <<= 1;
-        p++;
-    } while (p > q);
-    return q >> 1;
-}
-#endif
diff --git a/Modules/zlib/gzread.c b/Modules/zlib/gzread.c
deleted file mode 100644
index 956b91e..0000000
--- a/Modules/zlib/gzread.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/* gzread.c -- zlib functions for reading gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
-local int gz_avail OF((gz_statep));
-local int gz_look OF((gz_statep));
-local int gz_decomp OF((gz_statep));
-local int gz_fetch OF((gz_statep));
-local int gz_skip OF((gz_statep, z_off64_t));
-local z_size_t gz_read OF((gz_statep, voidp, z_size_t));
-
-/* Use read() to load a buffer -- return -1 on error, otherwise 0.  Read from
-   state->fd, and update state->eof, state->err, and state->msg as appropriate.
-   This function needs to loop on read(), since read() is not guaranteed to
-   read the number of bytes requested, depending on the type of descriptor. */
-local int gz_load(state, buf, len, have)
-    gz_statep state;
-    unsigned char *buf;
-    unsigned len;
-    unsigned *have;
-{
-    int ret;
-    unsigned get, max = ((unsigned)-1 >> 2) + 1;
-
-    *have = 0;
-    do {
-        get = len - *have;
-        if (get > max)
-            get = max;
-        ret = read(state->fd, buf + *have, get);
-        if (ret <= 0)
-            break;
-        *have += (unsigned)ret;
-    } while (*have < len);
-    if (ret < 0) {
-        gz_error(state, Z_ERRNO, zstrerror());
-        return -1;
-    }
-    if (ret == 0)
-        state->eof = 1;
-    return 0;
-}
-
-/* Load up input buffer and set eof flag if last data loaded -- return -1 on
-   error, 0 otherwise.  Note that the eof flag is set when the end of the input
-   file is reached, even though there may be unused data in the buffer.  Once
-   that data has been used, no more attempts will be made to read the file.
-   If strm->avail_in != 0, then the current data is moved to the beginning of
-   the input buffer, and then the remainder of the buffer is loaded with the
-   available data from the input file. */
-local int gz_avail(state)
-    gz_statep state;
-{
-    unsigned got;
-    z_streamp strm = &(state->strm);
-
-    if (state->err != Z_OK && state->err != Z_BUF_ERROR)
-        return -1;
-    if (state->eof == 0) {
-        if (strm->avail_in) {       /* copy what's there to the start */
-            unsigned char *p = state->in;
-            unsigned const char *q = strm->next_in;
-            unsigned n = strm->avail_in;
-            do {
-                *p++ = *q++;
-            } while (--n);
-        }
-        if (gz_load(state, state->in + strm->avail_in,
-                    state->size - strm->avail_in, &got) == -1)
-            return -1;
-        strm->avail_in += got;
-        strm->next_in = state->in;
-    }
-    return 0;
-}
-
-/* Look for gzip header, set up for inflate or copy.  state->x.have must be 0.
-   If this is the first time in, allocate required memory.  state->how will be
-   left unchanged if there is no more input data available, will be set to COPY
-   if there is no gzip header and direct copying will be performed, or it will
-   be set to GZIP for decompression.  If direct copying, then leftover input
-   data from the input buffer will be copied to the output buffer.  In that
-   case, all further file reads will be directly to either the output buffer or
-   a user buffer.  If decompressing, the inflate state will be initialized.
-   gz_look() will return 0 on success or -1 on failure. */
-local int gz_look(state)
-    gz_statep state;
-{
-    z_streamp strm = &(state->strm);
-
-    /* allocate read buffers and inflate memory */
-    if (state->size == 0) {
-        /* allocate buffers */
-        state->in = (unsigned char *)malloc(state->want);
-        state->out = (unsigned char *)malloc(state->want << 1);
-        if (state->in == NULL || state->out == NULL) {
-            free(state->out);
-            free(state->in);
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-        state->size = state->want;
-
-        /* allocate inflate memory */
-        state->strm.zalloc = Z_NULL;
-        state->strm.zfree = Z_NULL;
-        state->strm.opaque = Z_NULL;
-        state->strm.avail_in = 0;
-        state->strm.next_in = Z_NULL;
-        if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) {    /* gunzip */
-            free(state->out);
-            free(state->in);
-            state->size = 0;
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-    }
-
-    /* get at least the magic bytes in the input buffer */
-    if (strm->avail_in < 2) {
-        if (gz_avail(state) == -1)
-            return -1;
-        if (strm->avail_in == 0)
-            return 0;
-    }
-
-    /* look for gzip magic bytes -- if there, do gzip decoding (note: there is
-       a logical dilemma here when considering the case of a partially written
-       gzip file, to wit, if a single 31 byte is written, then we cannot tell
-       whether this is a single-byte file, or just a partially written gzip
-       file -- for here we assume that if a gzip file is being written, then
-       the header will be written in a single operation, so that reading a
-       single byte is sufficient indication that it is not a gzip file) */
-    if (strm->avail_in > 1 &&
-            strm->next_in[0] == 31 && strm->next_in[1] == 139) {
-        inflateReset(strm);
-        state->how = GZIP;
-        state->direct = 0;
-        return 0;
-    }
-
-    /* no gzip header -- if we were decoding gzip before, then this is trailing
-       garbage.  Ignore the trailing garbage and finish. */
-    if (state->direct == 0) {
-        strm->avail_in = 0;
-        state->eof = 1;
-        state->x.have = 0;
-        return 0;
-    }
-
-    /* doing raw i/o, copy any leftover input to output -- this assumes that
-       the output buffer is larger than the input buffer, which also assures
-       space for gzungetc() */
-    state->x.next = state->out;
-    if (strm->avail_in) {
-        memcpy(state->x.next, strm->next_in, strm->avail_in);
-        state->x.have = strm->avail_in;
-        strm->avail_in = 0;
-    }
-    state->how = COPY;
-    state->direct = 1;
-    return 0;
-}
-
-/* Decompress from input to the provided next_out and avail_out in the state.
-   On return, state->x.have and state->x.next point to the just decompressed
-   data.  If the gzip stream completes, state->how is reset to LOOK to look for
-   the next gzip stream or raw data, once state->x.have is depleted.  Returns 0
-   on success, -1 on failure. */
-local int gz_decomp(state)
-    gz_statep state;
-{
-    int ret = Z_OK;
-    unsigned had;
-    z_streamp strm = &(state->strm);
-
-    /* fill output buffer up to end of deflate stream */
-    had = strm->avail_out;
-    do {
-        /* get more input for inflate() */
-        if (strm->avail_in == 0 && gz_avail(state) == -1)
-            return -1;
-        if (strm->avail_in == 0) {
-            gz_error(state, Z_BUF_ERROR, "unexpected end of file");
-            break;
-        }
-
-        /* decompress and handle errors */
-        ret = inflate(strm, Z_NO_FLUSH);
-        if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
-            gz_error(state, Z_STREAM_ERROR,
-                     "internal error: inflate stream corrupt");
-            return -1;
-        }
-        if (ret == Z_MEM_ERROR) {
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-        if (ret == Z_DATA_ERROR) {              /* deflate stream invalid */
-            gz_error(state, Z_DATA_ERROR,
-                     strm->msg == NULL ? "compressed data error" : strm->msg);
-            return -1;
-        }
-    } while (strm->avail_out && ret != Z_STREAM_END);
-
-    /* update available output */
-    state->x.have = had - strm->avail_out;
-    state->x.next = strm->next_out - state->x.have;
-
-    /* if the gzip stream completed successfully, look for another */
-    if (ret == Z_STREAM_END)
-        state->how = LOOK;
-
-    /* good decompression */
-    return 0;
-}
-
-/* Fetch data and put it in the output buffer.  Assumes state->x.have is 0.
-   Data is either copied from the input file or decompressed from the input
-   file depending on state->how.  If state->how is LOOK, then a gzip header is
-   looked for to determine whether to copy or decompress.  Returns -1 on error,
-   otherwise 0.  gz_fetch() will leave state->how as COPY or GZIP unless the
-   end of the input file has been reached and all data has been processed.  */
-local int gz_fetch(state)
-    gz_statep state;
-{
-    z_streamp strm = &(state->strm);
-
-    do {
-        switch(state->how) {
-        case LOOK:      /* -> LOOK, COPY (only if never GZIP), or GZIP */
-            if (gz_look(state) == -1)
-                return -1;
-            if (state->how == LOOK)
-                return 0;
-            break;
-        case COPY:      /* -> COPY */
-            if (gz_load(state, state->out, state->size << 1, &(state->x.have))
-                    == -1)
-                return -1;
-            state->x.next = state->out;
-            return 0;
-        case GZIP:      /* -> GZIP or LOOK (if end of gzip stream) */
-            strm->avail_out = state->size << 1;
-            strm->next_out = state->out;
-            if (gz_decomp(state) == -1)
-                return -1;
-        }
-    } while (state->x.have == 0 && (!state->eof || strm->avail_in));
-    return 0;
-}
-
-/* Skip len uncompressed bytes of output.  Return -1 on error, 0 on success. */
-local int gz_skip(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
-    unsigned n;
-
-    /* skip over len bytes or reach end-of-file, whichever comes first */
-    while (len)
-        /* skip over whatever is in output buffer */
-        if (state->x.have) {
-            n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ?
-                (unsigned)len : state->x.have;
-            state->x.have -= n;
-            state->x.next += n;
-            state->x.pos += n;
-            len -= n;
-        }
-
-        /* output buffer empty -- return if we're at the end of the input */
-        else if (state->eof && state->strm.avail_in == 0)
-            break;
-
-        /* need more data to skip -- load up output buffer */
-        else {
-            /* get more output, looking for header if required */
-            if (gz_fetch(state) == -1)
-                return -1;
-        }
-    return 0;
-}
-
-/* Read len bytes into buf from file, or less than len up to the end of the
-   input.  Return the number of bytes read.  If zero is returned, either the
-   end of file was reached, or there was an error.  state->err must be
-   consulted in that case to determine which. */
-local z_size_t gz_read(state, buf, len)
-    gz_statep state;
-    voidp buf;
-    z_size_t len;
-{
-    z_size_t got;
-    unsigned n;
-
-    /* if len is zero, avoid unnecessary operations */
-    if (len == 0)
-        return 0;
-
-    /* process a skip request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_skip(state, state->skip) == -1)
-            return 0;
-    }
-
-    /* get len bytes to buf, or less than len if at the end */
-    got = 0;
-    do {
-        /* set n to the maximum amount of len that fits in an unsigned int */
-        n = -1;
-        if (n > len)
-            n = len;
-
-        /* first just try copying data from the output buffer */
-        if (state->x.have) {
-            if (state->x.have < n)
-                n = state->x.have;
-            memcpy(buf, state->x.next, n);
-            state->x.next += n;
-            state->x.have -= n;
-        }
-
-        /* output buffer empty -- return if we're at the end of the input */
-        else if (state->eof && state->strm.avail_in == 0) {
-            state->past = 1;        /* tried to read past end */
-            break;
-        }
-
-        /* need output data -- for small len or new stream load up our output
-           buffer */
-        else if (state->how == LOOK || n < (state->size << 1)) {
-            /* get more output, looking for header if required */
-            if (gz_fetch(state) == -1)
-                return 0;
-            continue;       /* no progress yet -- go back to copy above */
-            /* the copy above assures that we will leave with space in the
-               output buffer, allowing at least one gzungetc() to succeed */
-        }
-
-        /* large len -- read directly into user buffer */
-        else if (state->how == COPY) {      /* read directly */
-            if (gz_load(state, (unsigned char *)buf, n, &n) == -1)
-                return 0;
-        }
-
-        /* large len -- decompress directly into user buffer */
-        else {  /* state->how == GZIP */
-            state->strm.avail_out = n;
-            state->strm.next_out = (unsigned char *)buf;
-            if (gz_decomp(state) == -1)
-                return 0;
-            n = state->x.have;
-            state->x.have = 0;
-        }
-
-        /* update progress */
-        len -= n;
-        buf = (char *)buf + n;
-        got += n;
-        state->x.pos += n;
-    } while (len);
-
-    /* return number of bytes read into user buffer */
-    return got;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzread(file, buf, len)
-    gzFile file;
-    voidp buf;
-    unsigned len;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-            (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return -1;
-
-    /* since an int is returned, make sure len fits in one, otherwise return
-       with an error (this avoids a flaw in the interface) */
-    if ((int)len < 0) {
-        gz_error(state, Z_STREAM_ERROR, "request does not fit in an int");
-        return -1;
-    }
-
-    /* read len or fewer bytes to buf */
-    len = gz_read(state, buf, len);
-
-    /* check for an error */
-    if (len == 0 && state->err != Z_OK && state->err != Z_BUF_ERROR)
-        return -1;
-
-    /* return the number of bytes read (this is assured to fit in an int) */
-    return (int)len;
-}
-
-/* -- see zlib.h -- */
-z_size_t ZEXPORT gzfread(buf, size, nitems, file)
-    voidp buf;
-    z_size_t size;
-    z_size_t nitems;
-    gzFile file;
-{
-    z_size_t len;
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-            (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return 0;
-
-    /* compute bytes to read -- error on overflow */
-    len = nitems * size;
-    if (size && len / size != nitems) {
-        gz_error(state, Z_STREAM_ERROR, "request does not fit in a size_t");
-        return 0;
-    }
-
-    /* read len or fewer bytes to buf, return the number of full items read */
-    return len ? gz_read(state, buf, len) / size : 0;
-}
-
-/* -- see zlib.h -- */
-#ifdef Z_PREFIX_SET
-#  undef z_gzgetc
-#else
-#  undef gzgetc
-#endif
-int ZEXPORT gzgetc(file)
-    gzFile file;
-{
-    int ret;
-    unsigned char buf[1];
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-        (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return -1;
-
-    /* try output buffer (no need to check for skip request) */
-    if (state->x.have) {
-        state->x.have--;
-        state->x.pos++;
-        return *(state->x.next)++;
-    }
-
-    /* nothing there -- try gz_read() */
-    ret = gz_read(state, buf, 1);
-    return ret < 1 ? -1 : buf[0];
-}
-
-int ZEXPORT gzgetc_(file)
-gzFile file;
-{
-    return gzgetc(file);
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzungetc(c, file)
-    int c;
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-        (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return -1;
-
-    /* process a skip request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_skip(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* can't push EOF */
-    if (c < 0)
-        return -1;
-
-    /* if output buffer empty, put byte at end (allows more pushing) */
-    if (state->x.have == 0) {
-        state->x.have = 1;
-        state->x.next = state->out + (state->size << 1) - 1;
-        state->x.next[0] = (unsigned char)c;
-        state->x.pos--;
-        state->past = 0;
-        return c;
-    }
-
-    /* if no room, give up (must have already done a gzungetc()) */
-    if (state->x.have == (state->size << 1)) {
-        gz_error(state, Z_DATA_ERROR, "out of room to push characters");
-        return -1;
-    }
-
-    /* slide output data if needed and insert byte before existing data */
-    if (state->x.next == state->out) {
-        unsigned char *src = state->out + state->x.have;
-        unsigned char *dest = state->out + (state->size << 1);
-        while (src > state->out)
-            *--dest = *--src;
-        state->x.next = dest;
-    }
-    state->x.have++;
-    state->x.next--;
-    state->x.next[0] = (unsigned char)c;
-    state->x.pos--;
-    state->past = 0;
-    return c;
-}
-
-/* -- see zlib.h -- */
-char * ZEXPORT gzgets(file, buf, len)
-    gzFile file;
-    char *buf;
-    int len;
-{
-    unsigned left, n;
-    char *str;
-    unsigned char *eol;
-    gz_statep state;
-
-    /* check parameters and get internal structure */
-    if (file == NULL || buf == NULL || len < 1)
-        return NULL;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-        (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return NULL;
-
-    /* process a skip request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_skip(state, state->skip) == -1)
-            return NULL;
-    }
-
-    /* copy output bytes up to new line or len - 1, whichever comes first --
-       append a terminating zero to the string (we don't check for a zero in
-       the contents, let the user worry about that) */
-    str = buf;
-    left = (unsigned)len - 1;
-    if (left) do {
-        /* assure that something is in the output buffer */
-        if (state->x.have == 0 && gz_fetch(state) == -1)
-            return NULL;                /* error */
-        if (state->x.have == 0) {       /* end of file */
-            state->past = 1;            /* read past end */
-            break;                      /* return what we have */
-        }
-
-        /* look for end-of-line in current output buffer */
-        n = state->x.have > left ? left : state->x.have;
-        eol = (unsigned char *)memchr(state->x.next, '\n', n);
-        if (eol != NULL)
-            n = (unsigned)(eol - state->x.next) + 1;
-
-        /* copy through end-of-line, or remainder if not found */
-        memcpy(buf, state->x.next, n);
-        state->x.have -= n;
-        state->x.next += n;
-        state->x.pos += n;
-        left -= n;
-        buf += n;
-    } while (left && eol == NULL);
-
-    /* return terminated string, or if nothing, end of file */
-    if (buf == str)
-        return NULL;
-    buf[0] = 0;
-    return str;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzdirect(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-
-    /* if the state is not known, but we can find out, then do so (this is
-       mainly for right after a gzopen() or gzdopen()) */
-    if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
-        (void)gz_look(state);
-
-    /* return 1 if transparent, 0 if processing a gzip stream */
-    return state->direct;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_r(file)
-    gzFile file;
-{
-    int ret, err;
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    /* check that we're reading */
-    if (state->mode != GZ_READ)
-        return Z_STREAM_ERROR;
-
-    /* free memory and close file */
-    if (state->size) {
-        inflateEnd(&(state->strm));
-        free(state->out);
-        free(state->in);
-    }
-    err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK;
-    gz_error(state, Z_OK, NULL);
-    free(state->path);
-    ret = close(state->fd);
-    free(state);
-    return ret ? Z_ERRNO : err;
-}
diff --git a/Modules/zlib/gzwrite.c b/Modules/zlib/gzwrite.c
deleted file mode 100644
index c7b5651..0000000
--- a/Modules/zlib/gzwrite.c
+++ /dev/null
@@ -1,665 +0,0 @@
-/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004-2017 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_init OF((gz_statep));
-local int gz_comp OF((gz_statep, int));
-local int gz_zero OF((gz_statep, z_off64_t));
-local z_size_t gz_write OF((gz_statep, voidpc, z_size_t));
-
-/* Initialize state for writing a gzip file.  Mark initialization by setting
-   state->size to non-zero.  Return -1 on a memory allocation failure, or 0 on
-   success. */
-local int gz_init(state)
-    gz_statep state;
-{
-    int ret;
-    z_streamp strm = &(state->strm);
-
-    /* allocate input buffer (double size for gzprintf) */
-    state->in = (unsigned char *)malloc(state->want << 1);
-    if (state->in == NULL) {
-        gz_error(state, Z_MEM_ERROR, "out of memory");
-        return -1;
-    }
-
-    /* only need output buffer and deflate state if compressing */
-    if (!state->direct) {
-        /* allocate output buffer */
-        state->out = (unsigned char *)malloc(state->want);
-        if (state->out == NULL) {
-            free(state->in);
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-
-        /* allocate deflate memory, set up for gzip compression */
-        strm->zalloc = Z_NULL;
-        strm->zfree = Z_NULL;
-        strm->opaque = Z_NULL;
-        ret = deflateInit2(strm, state->level, Z_DEFLATED,
-                           MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
-        if (ret != Z_OK) {
-            free(state->out);
-            free(state->in);
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-        strm->next_in = NULL;
-    }
-
-    /* mark state as initialized */
-    state->size = state->want;
-
-    /* initialize write buffer if compressing */
-    if (!state->direct) {
-        strm->avail_out = state->size;
-        strm->next_out = state->out;
-        state->x.next = strm->next_out;
-    }
-    return 0;
-}
-
-/* Compress whatever is at avail_in and next_in and write to the output file.
-   Return -1 if there is an error writing to the output file or if gz_init()
-   fails to allocate memory, otherwise 0.  flush is assumed to be a valid
-   deflate() flush value.  If flush is Z_FINISH, then the deflate() state is
-   reset to start a new gzip stream.  If gz->direct is true, then simply write
-   to the output file without compressing, and ignore flush. */
-local int gz_comp(state, flush)
-    gz_statep state;
-    int flush;
-{
-    int ret, writ;
-    unsigned have, put, max = ((unsigned)-1 >> 2) + 1;
-    z_streamp strm = &(state->strm);
-
-    /* allocate memory if this is the first time through */
-    if (state->size == 0 && gz_init(state) == -1)
-        return -1;
-
-    /* write directly if requested */
-    if (state->direct) {
-        while (strm->avail_in) {
-            put = strm->avail_in > max ? max : strm->avail_in;
-            writ = write(state->fd, strm->next_in, put);
-            if (writ < 0) {
-                gz_error(state, Z_ERRNO, zstrerror());
-                return -1;
-            }
-            strm->avail_in -= (unsigned)writ;
-            strm->next_in += writ;
-        }
-        return 0;
-    }
-
-    /* run deflate() on provided input until it produces no more output */
-    ret = Z_OK;
-    do {
-        /* write out current buffer contents if full, or if flushing, but if
-           doing Z_FINISH then don't write until we get to Z_STREAM_END */
-        if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
-            (flush != Z_FINISH || ret == Z_STREAM_END))) {
-            while (strm->next_out > state->x.next) {
-                put = strm->next_out - state->x.next > (int)max ? max :
-                      (unsigned)(strm->next_out - state->x.next);
-                writ = write(state->fd, state->x.next, put);
-                if (writ < 0) {
-                    gz_error(state, Z_ERRNO, zstrerror());
-                    return -1;
-                }
-                state->x.next += writ;
-            }
-            if (strm->avail_out == 0) {
-                strm->avail_out = state->size;
-                strm->next_out = state->out;
-                state->x.next = state->out;
-            }
-        }
-
-        /* compress */
-        have = strm->avail_out;
-        ret = deflate(strm, flush);
-        if (ret == Z_STREAM_ERROR) {
-            gz_error(state, Z_STREAM_ERROR,
-                      "internal error: deflate stream corrupt");
-            return -1;
-        }
-        have -= strm->avail_out;
-    } while (have);
-
-    /* if that completed a deflate stream, allow another to start */
-    if (flush == Z_FINISH)
-        deflateReset(strm);
-
-    /* all done, no errors */
-    return 0;
-}
-
-/* Compress len zeros to output.  Return -1 on a write error or memory
-   allocation failure by gz_comp(), or 0 on success. */
-local int gz_zero(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
-    int first;
-    unsigned n;
-    z_streamp strm = &(state->strm);
-
-    /* consume whatever's left in the input buffer */
-    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-        return -1;
-
-    /* compress len zeros (len guaranteed > 0) */
-    first = 1;
-    while (len) {
-        n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
-            (unsigned)len : state->size;
-        if (first) {
-            memset(state->in, 0, n);
-            first = 0;
-        }
-        strm->avail_in = n;
-        strm->next_in = state->in;
-        state->x.pos += n;
-        if (gz_comp(state, Z_NO_FLUSH) == -1)
-            return -1;
-        len -= n;
-    }
-    return 0;
-}
-
-/* Write len bytes from buf to file.  Return the number of bytes written.  If
-   the returned value is less than len, then there was an error. */
-local z_size_t gz_write(state, buf, len)
-    gz_statep state;
-    voidpc buf;
-    z_size_t len;
-{
-    z_size_t put = len;
-
-    /* if len is zero, avoid unnecessary operations */
-    if (len == 0)
-        return 0;
-
-    /* allocate memory if this is the first time through */
-    if (state->size == 0 && gz_init(state) == -1)
-        return 0;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return 0;
-    }
-
-    /* for small len, copy to input buffer, otherwise compress directly */
-    if (len < state->size) {
-        /* copy to input buffer, compress when full */
-        do {
-            unsigned have, copy;
-
-            if (state->strm.avail_in == 0)
-                state->strm.next_in = state->in;
-            have = (unsigned)((state->strm.next_in + state->strm.avail_in) -
-                              state->in);
-            copy = state->size - have;
-            if (copy > len)
-                copy = len;
-            memcpy(state->in + have, buf, copy);
-            state->strm.avail_in += copy;
-            state->x.pos += copy;
-            buf = (const char *)buf + copy;
-            len -= copy;
-            if (len && gz_comp(state, Z_NO_FLUSH) == -1)
-                return 0;
-        } while (len);
-    }
-    else {
-        /* consume whatever's left in the input buffer */
-        if (state->strm.avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-            return 0;
-
-        /* directly compress user buffer to file */
-        state->strm.next_in = (z_const Bytef *)buf;
-        do {
-            unsigned n = (unsigned)-1;
-            if (n > len)
-                n = len;
-            state->strm.avail_in = n;
-            state->x.pos += n;
-            if (gz_comp(state, Z_NO_FLUSH) == -1)
-                return 0;
-            len -= n;
-        } while (len);
-    }
-
-    /* input was all buffered or compressed */
-    return put;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
-    gzFile file;
-    voidpc buf;
-    unsigned len;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
-
-    /* since an int is returned, make sure len fits in one, otherwise return
-       with an error (this avoids a flaw in the interface) */
-    if ((int)len < 0) {
-        gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
-        return 0;
-    }
-
-    /* write len bytes from buf (the return value will fit in an int) */
-    return (int)gz_write(state, buf, len);
-}
-
-/* -- see zlib.h -- */
-z_size_t ZEXPORT gzfwrite(buf, size, nitems, file)
-    voidpc buf;
-    z_size_t size;
-    z_size_t nitems;
-    gzFile file;
-{
-    z_size_t len;
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
-
-    /* compute bytes to read -- error on overflow */
-    len = nitems * size;
-    if (size && len / size != nitems) {
-        gz_error(state, Z_STREAM_ERROR, "request does not fit in a size_t");
-        return 0;
-    }
-
-    /* write len bytes to buf, return the number of full items written */
-    return len ? gz_write(state, buf, len) / size : 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputc(file, c)
-    gzFile file;
-    int c;
-{
-    unsigned have;
-    unsigned char buf[1];
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return -1;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* try writing to input buffer for speed (state->size == 0 if buffer not
-       initialized) */
-    if (state->size) {
-        if (strm->avail_in == 0)
-            strm->next_in = state->in;
-        have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
-        if (have < state->size) {
-            state->in[have] = (unsigned char)c;
-            strm->avail_in++;
-            state->x.pos++;
-            return c & 0xff;
-        }
-    }
-
-    /* no room in buffer or not initialized, use gz_write() */
-    buf[0] = (unsigned char)c;
-    if (gz_write(state, buf, 1) != 1)
-        return -1;
-    return c & 0xff;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputs(file, str)
-    gzFile file;
-    const char *str;
-{
-    int ret;
-    z_size_t len;
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return -1;
-
-    /* write string */
-    len = strlen(str);
-    ret = gz_write(state, str, len);
-    return ret == 0 && len != 0 ? -1 : ret;
-}
-
-#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#include <stdarg.h>
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
-{
-    int len;
-    unsigned left;
-    char *next;
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return Z_STREAM_ERROR;
-
-    /* make sure we have some buffer space */
-    if (state->size == 0 && gz_init(state) == -1)
-        return state->err;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return state->err;
-    }
-
-    /* do the printf() into the input buffer, put length in len -- the input
-       buffer is double-sized just for this function, so there is guaranteed to
-       be state->size bytes available after the current contents */
-    if (strm->avail_in == 0)
-        strm->next_in = state->in;
-    next = (char *)(state->in + (strm->next_in - state->in) + strm->avail_in);
-    next[state->size - 1] = 0;
-#ifdef NO_vsnprintf
-#  ifdef HAS_vsprintf_void
-    (void)vsprintf(next, format, va);
-    for (len = 0; len < state->size; len++)
-        if (next[len] == 0) break;
-#  else
-    len = vsprintf(next, format, va);
-#  endif
-#else
-#  ifdef HAS_vsnprintf_void
-    (void)vsnprintf(next, state->size, format, va);
-    len = strlen(next);
-#  else
-    len = vsnprintf(next, state->size, format, va);
-#  endif
-#endif
-
-    /* check that printf() results fit in buffer */
-    if (len == 0 || (unsigned)len >= state->size || next[state->size - 1] != 0)
-        return 0;
-
-    /* update buffer and position, compress first half if past that */
-    strm->avail_in += (unsigned)len;
-    state->x.pos += len;
-    if (strm->avail_in >= state->size) {
-        left = strm->avail_in - state->size;
-        strm->avail_in = state->size;
-        if (gz_comp(state, Z_NO_FLUSH) == -1)
-            return state->err;
-        memcpy(state->in, state->in + state->size, left);
-        strm->next_in = state->in;
-        strm->avail_in = left;
-    }
-    return len;
-}
-
-int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
-{
-    va_list va;
-    int ret;
-
-    va_start(va, format);
-    ret = gzvprintf(file, format, va);
-    va_end(va);
-    return ret;
-}
-
-#else /* !STDC && !Z_HAVE_STDARG_H */
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-                       a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
-    gzFile file;
-    const char *format;
-    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
-    unsigned len, left;
-    char *next;
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that can really pass pointer in ints */
-    if (sizeof(int) != sizeof(void *))
-        return Z_STREAM_ERROR;
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return Z_STREAM_ERROR;
-
-    /* make sure we have some buffer space */
-    if (state->size == 0 && gz_init(state) == -1)
-        return state->error;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return state->error;
-    }
-
-    /* do the printf() into the input buffer, put length in len -- the input
-       buffer is double-sized just for this function, so there is guaranteed to
-       be state->size bytes available after the current contents */
-    if (strm->avail_in == 0)
-        strm->next_in = state->in;
-    next = (char *)(strm->next_in + strm->avail_in);
-    next[state->size - 1] = 0;
-#ifdef NO_snprintf
-#  ifdef HAS_sprintf_void
-    sprintf(next, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12,
-            a13, a14, a15, a16, a17, a18, a19, a20);
-    for (len = 0; len < size; len++)
-        if (next[len] == 0)
-            break;
-#  else
-    len = sprintf(next, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11,
-                  a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#  endif
-#else
-#  ifdef HAS_snprintf_void
-    snprintf(next, state->size, format, a1, a2, a3, a4, a5, a6, a7, a8, a9,
-             a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    len = strlen(next);
-#  else
-    len = snprintf(next, state->size, format, a1, a2, a3, a4, a5, a6, a7, a8,
-                   a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#  endif
-#endif
-
-    /* check that printf() results fit in buffer */
-    if (len == 0 || len >= state->size || next[state->size - 1] != 0)
-        return 0;
-
-    /* update buffer and position, compress first half if past that */
-    strm->avail_in += len;
-    state->x.pos += len;
-    if (strm->avail_in >= state->size) {
-        left = strm->avail_in - state->size;
-        strm->avail_in = state->size;
-        if (gz_comp(state, Z_NO_FLUSH) == -1)
-            return state->err;
-        memcpy(state->in, state->in + state->size, left);
-        strm->next_in = state->in;
-        strm->avail_in = left;
-    }
-    return (int)len;
-}
-
-#endif
-
-/* -- see zlib.h -- */
-int ZEXPORT gzflush(file, flush)
-    gzFile file;
-    int flush;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return Z_STREAM_ERROR;
-
-    /* check flush parameter */
-    if (flush < 0 || flush > Z_FINISH)
-        return Z_STREAM_ERROR;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return state->err;
-    }
-
-    /* compress remaining data with requested flush */
-    (void)gz_comp(state, flush);
-    return state->err;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzsetparams(file, level, strategy)
-    gzFile file;
-    int level;
-    int strategy;
-{
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return Z_STREAM_ERROR;
-
-    /* if no change is requested, then do nothing */
-    if (level == state->level && strategy == state->strategy)
-        return Z_OK;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return state->err;
-    }
-
-    /* change compression parameters for subsequent input */
-    if (state->size) {
-        /* flush previous input with previous parameters before changing */
-        if (strm->avail_in && gz_comp(state, Z_BLOCK) == -1)
-            return state->err;
-        deflateParams(strm, level, strategy);
-    }
-    state->level = level;
-    state->strategy = strategy;
-    return Z_OK;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_w(file)
-    gzFile file;
-{
-    int ret = Z_OK;
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    /* check that we're writing */
-    if (state->mode != GZ_WRITE)
-        return Z_STREAM_ERROR;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            ret = state->err;
-    }
-
-    /* flush, free memory, and close file */
-    if (gz_comp(state, Z_FINISH) == -1)
-        ret = state->err;
-    if (state->size) {
-        if (!state->direct) {
-            (void)deflateEnd(&(state->strm));
-            free(state->out);
-        }
-        free(state->in);
-    }
-    gz_error(state, Z_OK, NULL);
-    free(state->path);
-    if (close(state->fd) == -1)
-        ret = Z_ERRNO;
-    free(state);
-    return ret;
-}
diff --git a/Modules/zlib/infback.c b/Modules/zlib/infback.c
deleted file mode 100644
index 59679ec..0000000
--- a/Modules/zlib/infback.c
+++ /dev/null
@@ -1,640 +0,0 @@
-/* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2016 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
-   This code is largely copied from inflate.c.  Normally either infback.o or
-   inflate.o would be linked into an application--not both.  The interface
-   with inffast.c is retained so that optimized assembler-coded versions of
-   inflate_fast() can be used with either inflate.c or infback.c.
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-/* function prototypes */
-local void fixedtables OF((struct inflate_state FAR *state));
-
-/*
-   strm provides memory allocation functions in zalloc and zfree, or
-   Z_NULL to use the library memory allocation functions.
-
-   windowBits is in the range 8..15, and window is a user-supplied
-   window and output buffer that is 2**windowBits bytes.
- */
-int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
-z_streamp strm;
-int windowBits;
-unsigned char FAR *window;
-const char *version;
-int stream_size;
-{
-    struct inflate_state FAR *state;
-
-    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-        stream_size != (int)(sizeof(z_stream)))
-        return Z_VERSION_ERROR;
-    if (strm == Z_NULL || window == Z_NULL ||
-        windowBits < 8 || windowBits > 15)
-        return Z_STREAM_ERROR;
-    strm->msg = Z_NULL;                 /* in case we return an error */
-    if (strm->zalloc == (alloc_func)0) {
-#ifdef Z_SOLO
-        return Z_STREAM_ERROR;
-#else
-        strm->zalloc = zcalloc;
-        strm->opaque = (voidpf)0;
-#endif
-    }
-    if (strm->zfree == (free_func)0)
-#ifdef Z_SOLO
-        return Z_STREAM_ERROR;
-#else
-    strm->zfree = zcfree;
-#endif
-    state = (struct inflate_state FAR *)ZALLOC(strm, 1,
-                                               sizeof(struct inflate_state));
-    if (state == Z_NULL) return Z_MEM_ERROR;
-    Tracev((stderr, "inflate: allocated\n"));
-    strm->state = (struct internal_state FAR *)state;
-    state->dmax = 32768U;
-    state->wbits = (uInt)windowBits;
-    state->wsize = 1U << windowBits;
-    state->window = window;
-    state->wnext = 0;
-    state->whave = 0;
-    return Z_OK;
-}
-
-/*
-   Return state with length and distance decoding tables and index sizes set to
-   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
-   If BUILDFIXED is defined, then instead this routine builds the tables the
-   first time it's called, and returns those tables the first time and
-   thereafter.  This reduces the size of the code by about 2K bytes, in
-   exchange for a little execution time.  However, BUILDFIXED should not be
-   used for threaded applications, since the rewriting of the tables and virgin
-   may not be thread-safe.
- */
-local void fixedtables(state)
-struct inflate_state FAR *state;
-{
-#ifdef BUILDFIXED
-    static int virgin = 1;
-    static code *lenfix, *distfix;
-    static code fixed[544];
-
-    /* build fixed huffman tables if first call (may not be thread safe) */
-    if (virgin) {
-        unsigned sym, bits;
-        static code *next;
-
-        /* literal/length table */
-        sym = 0;
-        while (sym < 144) state->lens[sym++] = 8;
-        while (sym < 256) state->lens[sym++] = 9;
-        while (sym < 280) state->lens[sym++] = 7;
-        while (sym < 288) state->lens[sym++] = 8;
-        next = fixed;
-        lenfix = next;
-        bits = 9;
-        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
-
-        /* distance table */
-        sym = 0;
-        while (sym < 32) state->lens[sym++] = 5;
-        distfix = next;
-        bits = 5;
-        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
-
-        /* do this just once */
-        virgin = 0;
-    }
-#else /* !BUILDFIXED */
-#   include "inffixed.h"
-#endif /* BUILDFIXED */
-    state->lencode = lenfix;
-    state->lenbits = 9;
-    state->distcode = distfix;
-    state->distbits = 5;
-}
-
-/* Macros for inflateBack(): */
-
-/* Load returned state from inflate_fast() */
-#define LOAD() \
-    do { \
-        put = strm->next_out; \
-        left = strm->avail_out; \
-        next = strm->next_in; \
-        have = strm->avail_in; \
-        hold = state->hold; \
-        bits = state->bits; \
-    } while (0)
-
-/* Set state from registers for inflate_fast() */
-#define RESTORE() \
-    do { \
-        strm->next_out = put; \
-        strm->avail_out = left; \
-        strm->next_in = next; \
-        strm->avail_in = have; \
-        state->hold = hold; \
-        state->bits = bits; \
-    } while (0)
-
-/* Clear the input bit accumulator */
-#define INITBITS() \
-    do { \
-        hold = 0; \
-        bits = 0; \
-    } while (0)
-
-/* Assure that some input is available.  If input is requested, but denied,
-   then return a Z_BUF_ERROR from inflateBack(). */
-#define PULL() \
-    do { \
-        if (have == 0) { \
-            have = in(in_desc, &next); \
-            if (have == 0) { \
-                next = Z_NULL; \
-                ret = Z_BUF_ERROR; \
-                goto inf_leave; \
-            } \
-        } \
-    } while (0)
-
-/* Get a byte of input into the bit accumulator, or return from inflateBack()
-   with an error if there is no input available. */
-#define PULLBYTE() \
-    do { \
-        PULL(); \
-        have--; \
-        hold += (unsigned long)(*next++) << bits; \
-        bits += 8; \
-    } while (0)
-
-/* Assure that there are at least n bits in the bit accumulator.  If there is
-   not enough available input to do that, then return from inflateBack() with
-   an error. */
-#define NEEDBITS(n) \
-    do { \
-        while (bits < (unsigned)(n)) \
-            PULLBYTE(); \
-    } while (0)
-
-/* Return the low n bits of the bit accumulator (n < 16) */
-#define BITS(n) \
-    ((unsigned)hold & ((1U << (n)) - 1))
-
-/* Remove n bits from the bit accumulator */
-#define DROPBITS(n) \
-    do { \
-        hold >>= (n); \
-        bits -= (unsigned)(n); \
-    } while (0)
-
-/* Remove zero to seven bits as needed to go to a byte boundary */
-#define BYTEBITS() \
-    do { \
-        hold >>= bits & 7; \
-        bits -= bits & 7; \
-    } while (0)
-
-/* Assure that some output space is available, by writing out the window
-   if it's full.  If the write fails, return from inflateBack() with a
-   Z_BUF_ERROR. */
-#define ROOM() \
-    do { \
-        if (left == 0) { \
-            put = state->window; \
-            left = state->wsize; \
-            state->whave = left; \
-            if (out(out_desc, put, left)) { \
-                ret = Z_BUF_ERROR; \
-                goto inf_leave; \
-            } \
-        } \
-    } while (0)
-
-/*
-   strm provides the memory allocation functions and window buffer on input,
-   and provides information on the unused input on return.  For Z_DATA_ERROR
-   returns, strm will also provide an error message.
-
-   in() and out() are the call-back input and output functions.  When
-   inflateBack() needs more input, it calls in().  When inflateBack() has
-   filled the window with output, or when it completes with data in the
-   window, it calls out() to write out the data.  The application must not
-   change the provided input until in() is called again or inflateBack()
-   returns.  The application must not change the window/output buffer until
-   inflateBack() returns.
-
-   in() and out() are called with a descriptor parameter provided in the
-   inflateBack() call.  This parameter can be a structure that provides the
-   information required to do the read or write, as well as accumulated
-   information on the input and output such as totals and check values.
-
-   in() should return zero on failure.  out() should return non-zero on
-   failure.  If either in() or out() fails, than inflateBack() returns a
-   Z_BUF_ERROR.  strm->next_in can be checked for Z_NULL to see whether it
-   was in() or out() that caused in the error.  Otherwise,  inflateBack()
-   returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
-   error, or Z_MEM_ERROR if it could not allocate memory for the state.
-   inflateBack() can also return Z_STREAM_ERROR if the input parameters
-   are not correct, i.e. strm is Z_NULL or the state was not initialized.
- */
-int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
-z_streamp strm;
-in_func in;
-void FAR *in_desc;
-out_func out;
-void FAR *out_desc;
-{
-    struct inflate_state FAR *state;
-    z_const unsigned char FAR *next;    /* next input */
-    unsigned char FAR *put;     /* next output */
-    unsigned have, left;        /* available input and output */
-    unsigned long hold;         /* bit buffer */
-    unsigned bits;              /* bits in bit buffer */
-    unsigned copy;              /* number of stored or match bytes to copy */
-    unsigned char FAR *from;    /* where to copy match bytes from */
-    code here;                  /* current decoding table entry */
-    code last;                  /* parent table entry */
-    unsigned len;               /* length to copy for repeats, bits to drop */
-    int ret;                    /* return code */
-    static const unsigned short order[19] = /* permutation of code lengths */
-        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-    /* Check that the strm exists and that the state was initialized */
-    if (strm == Z_NULL || strm->state == Z_NULL)
-        return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-
-    /* Reset the state */
-    strm->msg = Z_NULL;
-    state->mode = TYPE;
-    state->last = 0;
-    state->whave = 0;
-    next = strm->next_in;
-    have = next != Z_NULL ? strm->avail_in : 0;
-    hold = 0;
-    bits = 0;
-    put = state->window;
-    left = state->wsize;
-
-    /* Inflate until end of block marked as last */
-    for (;;)
-        switch (state->mode) {
-        case TYPE:
-            /* determine and dispatch block type */
-            if (state->last) {
-                BYTEBITS();
-                state->mode = DONE;
-                break;
-            }
-            NEEDBITS(3);
-            state->last = BITS(1);
-            DROPBITS(1);
-            switch (BITS(2)) {
-            case 0:                             /* stored block */
-                Tracev((stderr, "inflate:     stored block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = STORED;
-                break;
-            case 1:                             /* fixed block */
-                fixedtables(state);
-                Tracev((stderr, "inflate:     fixed codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = LEN;              /* decode codes */
-                break;
-            case 2:                             /* dynamic block */
-                Tracev((stderr, "inflate:     dynamic codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = TABLE;
-                break;
-            case 3:
-                strm->msg = (char *)"invalid block type";
-                state->mode = BAD;
-            }
-            DROPBITS(2);
-            break;
-
-        case STORED:
-            /* get and verify stored block length */
-            BYTEBITS();                         /* go to byte boundary */
-            NEEDBITS(32);
-            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
-                strm->msg = (char *)"invalid stored block lengths";
-                state->mode = BAD;
-                break;
-            }
-            state->length = (unsigned)hold & 0xffff;
-            Tracev((stderr, "inflate:       stored length %u\n",
-                    state->length));
-            INITBITS();
-
-            /* copy stored block from input to output */
-            while (state->length != 0) {
-                copy = state->length;
-                PULL();
-                ROOM();
-                if (copy > have) copy = have;
-                if (copy > left) copy = left;
-                zmemcpy(put, next, copy);
-                have -= copy;
-                next += copy;
-                left -= copy;
-                put += copy;
-                state->length -= copy;
-            }
-            Tracev((stderr, "inflate:       stored end\n"));
-            state->mode = TYPE;
-            break;
-
-        case TABLE:
-            /* get dynamic table entries descriptor */
-            NEEDBITS(14);
-            state->nlen = BITS(5) + 257;
-            DROPBITS(5);
-            state->ndist = BITS(5) + 1;
-            DROPBITS(5);
-            state->ncode = BITS(4) + 4;
-            DROPBITS(4);
-#ifndef PKZIP_BUG_WORKAROUND
-            if (state->nlen > 286 || state->ndist > 30) {
-                strm->msg = (char *)"too many length or distance symbols";
-                state->mode = BAD;
-                break;
-            }
-#endif
-            Tracev((stderr, "inflate:       table sizes ok\n"));
-
-            /* get code length code lengths (not a typo) */
-            state->have = 0;
-            while (state->have < state->ncode) {
-                NEEDBITS(3);
-                state->lens[order[state->have++]] = (unsigned short)BITS(3);
-                DROPBITS(3);
-            }
-            while (state->have < 19)
-                state->lens[order[state->have++]] = 0;
-            state->next = state->codes;
-            state->lencode = (code const FAR *)(state->next);
-            state->lenbits = 7;
-            ret = inflate_table(CODES, state->lens, 19, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid code lengths set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       code lengths ok\n"));
-
-            /* get length and distance code code lengths */
-            state->have = 0;
-            while (state->have < state->nlen + state->ndist) {
-                for (;;) {
-                    here = state->lencode[BITS(state->lenbits)];
-                    if ((unsigned)(here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                if (here.val < 16) {
-                    DROPBITS(here.bits);
-                    state->lens[state->have++] = here.val;
-                }
-                else {
-                    if (here.val == 16) {
-                        NEEDBITS(here.bits + 2);
-                        DROPBITS(here.bits);
-                        if (state->have == 0) {
-                            strm->msg = (char *)"invalid bit length repeat";
-                            state->mode = BAD;
-                            break;
-                        }
-                        len = (unsigned)(state->lens[state->have - 1]);
-                        copy = 3 + BITS(2);
-                        DROPBITS(2);
-                    }
-                    else if (here.val == 17) {
-                        NEEDBITS(here.bits + 3);
-                        DROPBITS(here.bits);
-                        len = 0;
-                        copy = 3 + BITS(3);
-                        DROPBITS(3);
-                    }
-                    else {
-                        NEEDBITS(here.bits + 7);
-                        DROPBITS(here.bits);
-                        len = 0;
-                        copy = 11 + BITS(7);
-                        DROPBITS(7);
-                    }
-                    if (state->have + copy > state->nlen + state->ndist) {
-                        strm->msg = (char *)"invalid bit length repeat";
-                        state->mode = BAD;
-                        break;
-                    }
-                    while (copy--)
-                        state->lens[state->have++] = (unsigned short)len;
-                }
-            }
-
-            /* handle error breaks in while */
-            if (state->mode == BAD) break;
-
-            /* check for end-of-block code (better have one) */
-            if (state->lens[256] == 0) {
-                strm->msg = (char *)"invalid code -- missing end-of-block";
-                state->mode = BAD;
-                break;
-            }
-
-            /* build code tables -- note: do not change the lenbits or distbits
-               values here (9 and 6) without reading the comments in inftrees.h
-               concerning the ENOUGH constants, which depend on those values */
-            state->next = state->codes;
-            state->lencode = (code const FAR *)(state->next);
-            state->lenbits = 9;
-            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid literal/lengths set";
-                state->mode = BAD;
-                break;
-            }
-            state->distcode = (code const FAR *)(state->next);
-            state->distbits = 6;
-            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
-                            &(state->next), &(state->distbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid distances set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       codes ok\n"));
-            state->mode = LEN;
-
-        case LEN:
-            /* use inflate_fast() if we have enough input and output */
-            if (have >= 6 && left >= 258) {
-                RESTORE();
-                if (state->whave < state->wsize)
-                    state->whave = state->wsize - left;
-                inflate_fast(strm, state->wsize);
-                LOAD();
-                break;
-            }
-
-            /* get a literal, length, or end-of-block code */
-            for (;;) {
-                here = state->lencode[BITS(state->lenbits)];
-                if ((unsigned)(here.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if (here.op && (here.op & 0xf0) == 0) {
-                last = here;
-                for (;;) {
-                    here = state->lencode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-            }
-            DROPBITS(here.bits);
-            state->length = (unsigned)here.val;
-
-            /* process literal */
-            if (here.op == 0) {
-                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
-                        "inflate:         literal '%c'\n" :
-                        "inflate:         literal 0x%02x\n", here.val));
-                ROOM();
-                *put++ = (unsigned char)(state->length);
-                left--;
-                state->mode = LEN;
-                break;
-            }
-
-            /* process end of block */
-            if (here.op & 32) {
-                Tracevv((stderr, "inflate:         end of block\n"));
-                state->mode = TYPE;
-                break;
-            }
-
-            /* invalid code */
-            if (here.op & 64) {
-                strm->msg = (char *)"invalid literal/length code";
-                state->mode = BAD;
-                break;
-            }
-
-            /* length code -- get extra bits, if any */
-            state->extra = (unsigned)(here.op) & 15;
-            if (state->extra != 0) {
-                NEEDBITS(state->extra);
-                state->length += BITS(state->extra);
-                DROPBITS(state->extra);
-            }
-            Tracevv((stderr, "inflate:         length %u\n", state->length));
-
-            /* get distance code */
-            for (;;) {
-                here = state->distcode[BITS(state->distbits)];
-                if ((unsigned)(here.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if ((here.op & 0xf0) == 0) {
-                last = here;
-                for (;;) {
-                    here = state->distcode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-            }
-            DROPBITS(here.bits);
-            if (here.op & 64) {
-                strm->msg = (char *)"invalid distance code";
-                state->mode = BAD;
-                break;
-            }
-            state->offset = (unsigned)here.val;
-
-            /* get distance extra bits, if any */
-            state->extra = (unsigned)(here.op) & 15;
-            if (state->extra != 0) {
-                NEEDBITS(state->extra);
-                state->offset += BITS(state->extra);
-                DROPBITS(state->extra);
-            }
-            if (state->offset > state->wsize - (state->whave < state->wsize ?
-                                                left : 0)) {
-                strm->msg = (char *)"invalid distance too far back";
-                state->mode = BAD;
-                break;
-            }
-            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
-
-            /* copy match from window to output */
-            do {
-                ROOM();
-                copy = state->wsize - state->offset;
-                if (copy < left) {
-                    from = put + copy;
-                    copy = left - copy;
-                }
-                else {
-                    from = put - state->offset;
-                    copy = left;
-                }
-                if (copy > state->length) copy = state->length;
-                state->length -= copy;
-                left -= copy;
-                do {
-                    *put++ = *from++;
-                } while (--copy);
-            } while (state->length != 0);
-            break;
-
-        case DONE:
-            /* inflate stream terminated properly -- write leftover output */
-            ret = Z_STREAM_END;
-            if (left < state->wsize) {
-                if (out(out_desc, state->window, state->wsize - left))
-                    ret = Z_BUF_ERROR;
-            }
-            goto inf_leave;
-
-        case BAD:
-            ret = Z_DATA_ERROR;
-            goto inf_leave;
-
-        default:                /* can't happen, but makes compilers happy */
-            ret = Z_STREAM_ERROR;
-            goto inf_leave;
-        }
-
-    /* Return unused input */
-  inf_leave:
-    strm->next_in = next;
-    strm->avail_in = have;
-    return ret;
-}
-
-int ZEXPORT inflateBackEnd(strm)
-z_streamp strm;
-{
-    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
-        return Z_STREAM_ERROR;
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-    Tracev((stderr, "inflate: end\n"));
-    return Z_OK;
-}
diff --git a/Modules/zlib/inffast.c b/Modules/zlib/inffast.c
deleted file mode 100644
index 0dbd1db..0000000
--- a/Modules/zlib/inffast.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/* inffast.c -- fast decoding
- * Copyright (C) 1995-2017 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-#ifdef ASMINF
-#  pragma message("Assembler code may have bugs -- use at your own risk")
-#else
-
-/*
-   Decode literal, length, and distance codes and write out the resulting
-   literal and match bytes until either not enough input or output is
-   available, an end-of-block is encountered, or a data error is encountered.
-   When large enough input and output buffers are supplied to inflate(), for
-   example, a 16K input buffer and a 64K output buffer, more than 95% of the
-   inflate execution time is spent in this routine.
-
-   Entry assumptions:
-
-        state->mode == LEN
-        strm->avail_in >= 6
-        strm->avail_out >= 258
-        start >= strm->avail_out
-        state->bits < 8
-
-   On return, state->mode is one of:
-
-        LEN -- ran out of enough output space or enough available input
-        TYPE -- reached end of block code, inflate() to interpret next block
-        BAD -- error in block data
-
-   Notes:
-
-    - The maximum input bits used by a length/distance pair is 15 bits for the
-      length code, 5 bits for the length extra, 15 bits for the distance code,
-      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
-      Therefore if strm->avail_in >= 6, then there is enough input to avoid
-      checking for available input while decoding.
-
-    - The maximum bytes that a single length/distance pair can output is 258
-      bytes, which is the maximum length that can be coded.  inflate_fast()
-      requires strm->avail_out >= 258 for each loop to avoid checking for
-      output space.
- */
-void ZLIB_INTERNAL inflate_fast(strm, start)
-z_streamp strm;
-unsigned start;         /* inflate()'s starting value for strm->avail_out */
-{
-    struct inflate_state FAR *state;
-    z_const unsigned char FAR *in;      /* local strm->next_in */
-    z_const unsigned char FAR *last;    /* have enough input while in < last */
-    unsigned char FAR *out;     /* local strm->next_out */
-    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
-    unsigned char FAR *end;     /* while out < end, enough space available */
-#ifdef INFLATE_STRICT
-    unsigned dmax;              /* maximum distance from zlib header */
-#endif
-    unsigned wsize;             /* window size or zero if not using window */
-    unsigned whave;             /* valid bytes in the window */
-    unsigned wnext;             /* window write index */
-    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
-    unsigned long hold;         /* local strm->hold */
-    unsigned bits;              /* local strm->bits */
-    code const FAR *lcode;      /* local strm->lencode */
-    code const FAR *dcode;      /* local strm->distcode */
-    unsigned lmask;             /* mask for first level of length codes */
-    unsigned dmask;             /* mask for first level of distance codes */
-    code here;                  /* retrieved table entry */
-    unsigned op;                /* code bits, operation, extra bits, or */
-                                /*  window position, window bytes to copy */
-    unsigned len;               /* match length, unused bytes */
-    unsigned dist;              /* match distance */
-    unsigned char FAR *from;    /* where to copy match from */
-
-    /* copy state to local variables */
-    state = (struct inflate_state FAR *)strm->state;
-    in = strm->next_in;
-    last = in + (strm->avail_in - 5);
-    out = strm->next_out;
-    beg = out - (start - strm->avail_out);
-    end = out + (strm->avail_out - 257);
-#ifdef INFLATE_STRICT
-    dmax = state->dmax;
-#endif
-    wsize = state->wsize;
-    whave = state->whave;
-    wnext = state->wnext;
-    window = state->window;
-    hold = state->hold;
-    bits = state->bits;
-    lcode = state->lencode;
-    dcode = state->distcode;
-    lmask = (1U << state->lenbits) - 1;
-    dmask = (1U << state->distbits) - 1;
-
-    /* decode literals and length/distances until end-of-block or not enough
-       input data or output space */
-    do {
-        if (bits < 15) {
-            hold += (unsigned long)(*in++) << bits;
-            bits += 8;
-            hold += (unsigned long)(*in++) << bits;
-            bits += 8;
-        }
-        here = lcode[hold & lmask];
-      dolen:
-        op = (unsigned)(here.bits);
-        hold >>= op;
-        bits -= op;
-        op = (unsigned)(here.op);
-        if (op == 0) {                          /* literal */
-            Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
-                    "inflate:         literal '%c'\n" :
-                    "inflate:         literal 0x%02x\n", here.val));
-            *out++ = (unsigned char)(here.val);
-        }
-        else if (op & 16) {                     /* length base */
-            len = (unsigned)(here.val);
-            op &= 15;                           /* number of extra bits */
-            if (op) {
-                if (bits < op) {
-                    hold += (unsigned long)(*in++) << bits;
-                    bits += 8;
-                }
-                len += (unsigned)hold & ((1U << op) - 1);
-                hold >>= op;
-                bits -= op;
-            }
-            Tracevv((stderr, "inflate:         length %u\n", len));
-            if (bits < 15) {
-                hold += (unsigned long)(*in++) << bits;
-                bits += 8;
-                hold += (unsigned long)(*in++) << bits;
-                bits += 8;
-            }
-            here = dcode[hold & dmask];
-          dodist:
-            op = (unsigned)(here.bits);
-            hold >>= op;
-            bits -= op;
-            op = (unsigned)(here.op);
-            if (op & 16) {                      /* distance base */
-                dist = (unsigned)(here.val);
-                op &= 15;                       /* number of extra bits */
-                if (bits < op) {
-                    hold += (unsigned long)(*in++) << bits;
-                    bits += 8;
-                    if (bits < op) {
-                        hold += (unsigned long)(*in++) << bits;
-                        bits += 8;
-                    }
-                }
-                dist += (unsigned)hold & ((1U << op) - 1);
-#ifdef INFLATE_STRICT
-                if (dist > dmax) {
-                    strm->msg = (char *)"invalid distance too far back";
-                    state->mode = BAD;
-                    break;
-                }
-#endif
-                hold >>= op;
-                bits -= op;
-                Tracevv((stderr, "inflate:         distance %u\n", dist));
-                op = (unsigned)(out - beg);     /* max distance in output */
-                if (dist > op) {                /* see if copy from window */
-                    op = dist - op;             /* distance back in window */
-                    if (op > whave) {
-                        if (state->sane) {
-                            strm->msg =
-                                (char *)"invalid distance too far back";
-                            state->mode = BAD;
-                            break;
-                        }
-#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
-                        if (len <= op - whave) {
-                            do {
-                                *out++ = 0;
-                            } while (--len);
-                            continue;
-                        }
-                        len -= op - whave;
-                        do {
-                            *out++ = 0;
-                        } while (--op > whave);
-                        if (op == 0) {
-                            from = out - dist;
-                            do {
-                                *out++ = *from++;
-                            } while (--len);
-                            continue;
-                        }
-#endif
-                    }
-                    from = window;
-                    if (wnext == 0) {           /* very common case */
-                        from += wsize - op;
-                        if (op < len) {         /* some from window */
-                            len -= op;
-                            do {
-                                *out++ = *from++;
-                            } while (--op);
-                            from = out - dist;  /* rest from output */
-                        }
-                    }
-                    else if (wnext < op) {      /* wrap around window */
-                        from += wsize + wnext - op;
-                        op -= wnext;
-                        if (op < len) {         /* some from end of window */
-                            len -= op;
-                            do {
-                                *out++ = *from++;
-                            } while (--op);
-                            from = window;
-                            if (wnext < len) {  /* some from start of window */
-                                op = wnext;
-                                len -= op;
-                                do {
-                                    *out++ = *from++;
-                                } while (--op);
-                                from = out - dist;      /* rest from output */
-                            }
-                        }
-                    }
-                    else {                      /* contiguous in window */
-                        from += wnext - op;
-                        if (op < len) {         /* some from window */
-                            len -= op;
-                            do {
-                                *out++ = *from++;
-                            } while (--op);
-                            from = out - dist;  /* rest from output */
-                        }
-                    }
-                    while (len > 2) {
-                        *out++ = *from++;
-                        *out++ = *from++;
-                        *out++ = *from++;
-                        len -= 3;
-                    }
-                    if (len) {
-                        *out++ = *from++;
-                        if (len > 1)
-                            *out++ = *from++;
-                    }
-                }
-                else {
-                    from = out - dist;          /* copy direct from output */
-                    do {                        /* minimum length is three */
-                        *out++ = *from++;
-                        *out++ = *from++;
-                        *out++ = *from++;
-                        len -= 3;
-                    } while (len > 2);
-                    if (len) {
-                        *out++ = *from++;
-                        if (len > 1)
-                            *out++ = *from++;
-                    }
-                }
-            }
-            else if ((op & 64) == 0) {          /* 2nd level distance code */
-                here = dcode[here.val + (hold & ((1U << op) - 1))];
-                goto dodist;
-            }
-            else {
-                strm->msg = (char *)"invalid distance code";
-                state->mode = BAD;
-                break;
-            }
-        }
-        else if ((op & 64) == 0) {              /* 2nd level length code */
-            here = lcode[here.val + (hold & ((1U << op) - 1))];
-            goto dolen;
-        }
-        else if (op & 32) {                     /* end-of-block */
-            Tracevv((stderr, "inflate:         end of block\n"));
-            state->mode = TYPE;
-            break;
-        }
-        else {
-            strm->msg = (char *)"invalid literal/length code";
-            state->mode = BAD;
-            break;
-        }
-    } while (in < last && out < end);
-
-    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
-    len = bits >> 3;
-    in -= len;
-    bits -= len << 3;
-    hold &= (1U << bits) - 1;
-
-    /* update state and return */
-    strm->next_in = in;
-    strm->next_out = out;
-    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
-    strm->avail_out = (unsigned)(out < end ?
-                                 257 + (end - out) : 257 - (out - end));
-    state->hold = hold;
-    state->bits = bits;
-    return;
-}
-
-/*
-   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
-   - Using bit fields for code structure
-   - Different op definition to avoid & for extra bits (do & for table bits)
-   - Three separate decoding do-loops for direct, window, and wnext == 0
-   - Special case for distance > 1 copies to do overlapped load and store copy
-   - Explicit branch predictions (based on measured branch probabilities)
-   - Deferring match copy and interspersed it with decoding subsequent codes
-   - Swapping literal/length else
-   - Swapping window/direct else
-   - Larger unrolled copy loops (three is about right)
-   - Moving len -= 3 statement into middle of loop
- */
-
-#endif /* !ASMINF */
diff --git a/Modules/zlib/inffast.h b/Modules/zlib/inffast.h
deleted file mode 100644
index e5c1aa4..0000000
--- a/Modules/zlib/inffast.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-2003, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
diff --git a/Modules/zlib/inffixed.h b/Modules/zlib/inffixed.h
deleted file mode 100644
index d628327..0000000
--- a/Modules/zlib/inffixed.h
+++ /dev/null
@@ -1,94 +0,0 @@
-    /* inffixed.h -- table for decoding fixed codes
-     * Generated automatically by makefixed().
-     */
-
-    /* WARNING: this file should *not* be used by applications.
-       It is part of the implementation of this library and is
-       subject to change. Applications should only use zlib.h.
-     */
-
-    static const code lenfix[512] = {
-        {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
-        {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
-        {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
-        {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
-        {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
-        {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
-        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
-        {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
-        {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
-        {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
-        {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
-        {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
-        {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
-        {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
-        {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
-        {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
-        {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
-        {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
-        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
-        {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
-        {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
-        {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
-        {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
-        {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
-        {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
-        {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
-        {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
-        {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
-        {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
-        {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
-        {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
-        {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
-        {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
-        {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
-        {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
-        {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
-        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
-        {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
-        {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
-        {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
-        {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
-        {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
-        {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
-        {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
-        {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
-        {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
-        {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
-        {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
-        {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
-        {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
-        {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
-        {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
-        {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
-        {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
-        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
-        {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
-        {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
-        {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
-        {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
-        {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
-        {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
-        {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
-        {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
-        {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
-        {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
-        {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
-        {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
-        {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
-        {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
-        {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
-        {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
-        {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
-        {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
-        {0,9,255}
-    };
-
-    static const code distfix[32] = {
-        {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
-        {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
-        {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
-        {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
-        {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
-        {22,5,193},{64,5,0}
-    };
diff --git a/Modules/zlib/inflate.c b/Modules/zlib/inflate.c
deleted file mode 100644
index ac333e8..0000000
--- a/Modules/zlib/inflate.c
+++ /dev/null
@@ -1,1561 +0,0 @@
-/* inflate.c -- zlib decompression
- * Copyright (C) 1995-2016 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * Change history:
- *
- * 1.2.beta0    24 Nov 2002
- * - First version -- complete rewrite of inflate to simplify code, avoid
- *   creation of window when not needed, minimize use of window when it is
- *   needed, make inffast.c even faster, implement gzip decoding, and to
- *   improve code readability and style over the previous zlib inflate code
- *
- * 1.2.beta1    25 Nov 2002
- * - Use pointers for available input and output checking in inffast.c
- * - Remove input and output counters in inffast.c
- * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
- * - Remove unnecessary second byte pull from length extra in inffast.c
- * - Unroll direct copy to three copies per loop in inffast.c
- *
- * 1.2.beta2    4 Dec 2002
- * - Change external routine names to reduce potential conflicts
- * - Correct filename to inffixed.h for fixed tables in inflate.c
- * - Make hbuf[] unsigned char to match parameter type in inflate.c
- * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
- *   to avoid negation problem on Alphas (64 bit) in inflate.c
- *
- * 1.2.beta3    22 Dec 2002
- * - Add comments on state->bits assertion in inffast.c
- * - Add comments on op field in inftrees.h
- * - Fix bug in reuse of allocated window after inflateReset()
- * - Remove bit fields--back to byte structure for speed
- * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
- * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
- * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
- * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
- * - Use local copies of stream next and avail values, as well as local bit
- *   buffer and bit count in inflate()--for speed when inflate_fast() not used
- *
- * 1.2.beta4    1 Jan 2003
- * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
- * - Move a comment on output buffer sizes from inffast.c to inflate.c
- * - Add comments in inffast.c to introduce the inflate_fast() routine
- * - Rearrange window copies in inflate_fast() for speed and simplification
- * - Unroll last copy for window match in inflate_fast()
- * - Use local copies of window variables in inflate_fast() for speed
- * - Pull out common wnext == 0 case for speed in inflate_fast()
- * - Make op and len in inflate_fast() unsigned for consistency
- * - Add FAR to lcode and dcode declarations in inflate_fast()
- * - Simplified bad distance check in inflate_fast()
- * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
- *   source file infback.c to provide a call-back interface to inflate for
- *   programs like gzip and unzip -- uses window as output buffer to avoid
- *   window copying
- *
- * 1.2.beta5    1 Jan 2003
- * - Improved inflateBack() interface to allow the caller to provide initial
- *   input in strm.
- * - Fixed stored blocks bug in inflateBack()
- *
- * 1.2.beta6    4 Jan 2003
- * - Added comments in inffast.c on effectiveness of POSTINC
- * - Typecasting all around to reduce compiler warnings
- * - Changed loops from while (1) or do {} while (1) to for (;;), again to
- *   make compilers happy
- * - Changed type of window in inflateBackInit() to unsigned char *
- *
- * 1.2.beta7    27 Jan 2003
- * - Changed many types to unsigned or unsigned short to avoid warnings
- * - Added inflateCopy() function
- *
- * 1.2.0        9 Mar 2003
- * - Changed inflateBack() interface to provide separate opaque descriptors
- *   for the in() and out() functions
- * - Changed inflateBack() argument and in_func typedef to swap the length
- *   and buffer address return values for the input function
- * - Check next_in and next_out for Z_NULL on entry to inflate()
- *
- * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-#ifdef MAKEFIXED
-#  ifndef BUILDFIXED
-#    define BUILDFIXED
-#  endif
-#endif
-
-/* function prototypes */
-local int inflateStateCheck OF((z_streamp strm));
-local void fixedtables OF((struct inflate_state FAR *state));
-local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
-                           unsigned copy));
-#ifdef BUILDFIXED
-   void makefixed OF((void));
-#endif
-local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
-                              unsigned len));
-
-local int inflateStateCheck(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-    if (strm == Z_NULL ||
-        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
-        return 1;
-    state = (struct inflate_state FAR *)strm->state;
-    if (state == Z_NULL || state->strm != strm ||
-        state->mode < HEAD || state->mode > SYNC)
-        return 1;
-    return 0;
-}
-
-int ZEXPORT inflateResetKeep(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    strm->total_in = strm->total_out = state->total = 0;
-    strm->msg = Z_NULL;
-    if (state->wrap)        /* to support ill-conceived Java test suite */
-        strm->adler = state->wrap & 1;
-    state->mode = HEAD;
-    state->last = 0;
-    state->havedict = 0;
-    state->dmax = 32768U;
-    state->head = Z_NULL;
-    state->hold = 0;
-    state->bits = 0;
-    state->lencode = state->distcode = state->next = state->codes;
-    state->sane = 1;
-    state->back = -1;
-    Tracev((stderr, "inflate: reset\n"));
-    return Z_OK;
-}
-
-int ZEXPORT inflateReset(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    state->wsize = 0;
-    state->whave = 0;
-    state->wnext = 0;
-    return inflateResetKeep(strm);
-}
-
-int ZEXPORT inflateReset2(strm, windowBits)
-z_streamp strm;
-int windowBits;
-{
-    int wrap;
-    struct inflate_state FAR *state;
-
-    /* get the state */
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-
-    /* extract wrap request from windowBits parameter */
-    if (windowBits < 0) {
-        wrap = 0;
-        windowBits = -windowBits;
-    }
-    else {
-        wrap = (windowBits >> 4) + 5;
-#ifdef GUNZIP
-        if (windowBits < 48)
-            windowBits &= 15;
-#endif
-    }
-
-    /* set number of window bits, free window if different */
-    if (windowBits && (windowBits < 8 || windowBits > 15))
-        return Z_STREAM_ERROR;
-    if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
-        ZFREE(strm, state->window);
-        state->window = Z_NULL;
-    }
-
-    /* update state and reset the rest of it */
-    state->wrap = wrap;
-    state->wbits = (unsigned)windowBits;
-    return inflateReset(strm);
-}
-
-int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
-z_streamp strm;
-int windowBits;
-const char *version;
-int stream_size;
-{
-    int ret;
-    struct inflate_state FAR *state;
-
-    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-        stream_size != (int)(sizeof(z_stream)))
-        return Z_VERSION_ERROR;
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-    strm->msg = Z_NULL;                 /* in case we return an error */
-    if (strm->zalloc == (alloc_func)0) {
-#ifdef Z_SOLO
-        return Z_STREAM_ERROR;
-#else
-        strm->zalloc = zcalloc;
-        strm->opaque = (voidpf)0;
-#endif
-    }
-    if (strm->zfree == (free_func)0)
-#ifdef Z_SOLO
-        return Z_STREAM_ERROR;
-#else
-        strm->zfree = zcfree;
-#endif
-    state = (struct inflate_state FAR *)
-            ZALLOC(strm, 1, sizeof(struct inflate_state));
-    if (state == Z_NULL) return Z_MEM_ERROR;
-    Tracev((stderr, "inflate: allocated\n"));
-    strm->state = (struct internal_state FAR *)state;
-    state->strm = strm;
-    state->window = Z_NULL;
-    state->mode = HEAD;     /* to pass state test in inflateReset2() */
-    ret = inflateReset2(strm, windowBits);
-    if (ret != Z_OK) {
-        ZFREE(strm, state);
-        strm->state = Z_NULL;
-    }
-    return ret;
-}
-
-int ZEXPORT inflateInit_(strm, version, stream_size)
-z_streamp strm;
-const char *version;
-int stream_size;
-{
-    return inflateInit2_(strm, DEF_WBITS, version, stream_size);
-}
-
-int ZEXPORT inflatePrime(strm, bits, value)
-z_streamp strm;
-int bits;
-int value;
-{
-    struct inflate_state FAR *state;
-
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if (bits < 0) {
-        state->hold = 0;
-        state->bits = 0;
-        return Z_OK;
-    }
-    if (bits > 16 || state->bits + (uInt)bits > 32) return Z_STREAM_ERROR;
-    value &= (1L << bits) - 1;
-    state->hold += (unsigned)value << state->bits;
-    state->bits += (uInt)bits;
-    return Z_OK;
-}
-
-/*
-   Return state with length and distance decoding tables and index sizes set to
-   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
-   If BUILDFIXED is defined, then instead this routine builds the tables the
-   first time it's called, and returns those tables the first time and
-   thereafter.  This reduces the size of the code by about 2K bytes, in
-   exchange for a little execution time.  However, BUILDFIXED should not be
-   used for threaded applications, since the rewriting of the tables and virgin
-   may not be thread-safe.
- */
-local void fixedtables(state)
-struct inflate_state FAR *state;
-{
-#ifdef BUILDFIXED
-    static int virgin = 1;
-    static code *lenfix, *distfix;
-    static code fixed[544];
-
-    /* build fixed huffman tables if first call (may not be thread safe) */
-    if (virgin) {
-        unsigned sym, bits;
-        static code *next;
-
-        /* literal/length table */
-        sym = 0;
-        while (sym < 144) state->lens[sym++] = 8;
-        while (sym < 256) state->lens[sym++] = 9;
-        while (sym < 280) state->lens[sym++] = 7;
-        while (sym < 288) state->lens[sym++] = 8;
-        next = fixed;
-        lenfix = next;
-        bits = 9;
-        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
-
-        /* distance table */
-        sym = 0;
-        while (sym < 32) state->lens[sym++] = 5;
-        distfix = next;
-        bits = 5;
-        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
-
-        /* do this just once */
-        virgin = 0;
-    }
-#else /* !BUILDFIXED */
-#   include "inffixed.h"
-#endif /* BUILDFIXED */
-    state->lencode = lenfix;
-    state->lenbits = 9;
-    state->distcode = distfix;
-    state->distbits = 5;
-}
-
-#ifdef MAKEFIXED
-#include <stdio.h>
-
-/*
-   Write out the inffixed.h that is #include'd above.  Defining MAKEFIXED also
-   defines BUILDFIXED, so the tables are built on the fly.  makefixed() writes
-   those tables to stdout, which would be piped to inffixed.h.  A small program
-   can simply call makefixed to do this:
-
-    void makefixed(void);
-
-    int main(void)
-    {
-        makefixed();
-        return 0;
-    }
-
-   Then that can be linked with zlib built with MAKEFIXED defined and run:
-
-    a.out > inffixed.h
- */
-void makefixed()
-{
-    unsigned low, size;
-    struct inflate_state state;
-
-    fixedtables(&state);
-    puts("    /* inffixed.h -- table for decoding fixed codes");
-    puts("     * Generated automatically by makefixed().");
-    puts("     */");
-    puts("");
-    puts("    /* WARNING: this file should *not* be used by applications.");
-    puts("       It is part of the implementation of this library and is");
-    puts("       subject to change. Applications should only use zlib.h.");
-    puts("     */");
-    puts("");
-    size = 1U << 9;
-    printf("    static const code lenfix[%u] = {", size);
-    low = 0;
-    for (;;) {
-        if ((low % 7) == 0) printf("\n        ");
-        printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
-               state.lencode[low].bits, state.lencode[low].val);
-        if (++low == size) break;
-        putchar(',');
-    }
-    puts("\n    };");
-    size = 1U << 5;
-    printf("\n    static const code distfix[%u] = {", size);
-    low = 0;
-    for (;;) {
-        if ((low % 6) == 0) printf("\n        ");
-        printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
-               state.distcode[low].val);
-        if (++low == size) break;
-        putchar(',');
-    }
-    puts("\n    };");
-}
-#endif /* MAKEFIXED */
-
-/*
-   Update the window with the last wsize (normally 32K) bytes written before
-   returning.  If window does not exist yet, create it.  This is only called
-   when a window is already in use, or when output has been written during this
-   inflate call, but the end of the deflate stream has not been reached yet.
-   It is also called to create a window for dictionary data when a dictionary
-   is loaded.
-
-   Providing output buffers larger than 32K to inflate() should provide a speed
-   advantage, since only the last 32K of output is copied to the sliding window
-   upon return from inflate(), and since all distances after the first 32K of
-   output will fall in the output data, making match copies simpler and faster.
-   The advantage may be dependent on the size of the processor's data caches.
- */
-local int updatewindow(strm, end, copy)
-z_streamp strm;
-const Bytef *end;
-unsigned copy;
-{
-    struct inflate_state FAR *state;
-    unsigned dist;
-
-    state = (struct inflate_state FAR *)strm->state;
-
-    /* if it hasn't been done already, allocate space for the window */
-    if (state->window == Z_NULL) {
-        state->window = (unsigned char FAR *)
-                        ZALLOC(strm, 1U << state->wbits,
-                               sizeof(unsigned char));
-        if (state->window == Z_NULL) return 1;
-    }
-
-    /* if window not in use yet, initialize */
-    if (state->wsize == 0) {
-        state->wsize = 1U << state->wbits;
-        state->wnext = 0;
-        state->whave = 0;
-    }
-
-    /* copy state->wsize or less output bytes into the circular window */
-    if (copy >= state->wsize) {
-        zmemcpy(state->window, end - state->wsize, state->wsize);
-        state->wnext = 0;
-        state->whave = state->wsize;
-    }
-    else {
-        dist = state->wsize - state->wnext;
-        if (dist > copy) dist = copy;
-        zmemcpy(state->window + state->wnext, end - copy, dist);
-        copy -= dist;
-        if (copy) {
-            zmemcpy(state->window, end - copy, copy);
-            state->wnext = copy;
-            state->whave = state->wsize;
-        }
-        else {
-            state->wnext += dist;
-            if (state->wnext == state->wsize) state->wnext = 0;
-            if (state->whave < state->wsize) state->whave += dist;
-        }
-    }
-    return 0;
-}
-
-/* Macros for inflate(): */
-
-/* check function to use adler32() for zlib or crc32() for gzip */
-#ifdef GUNZIP
-#  define UPDATE(check, buf, len) \
-    (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
-#else
-#  define UPDATE(check, buf, len) adler32(check, buf, len)
-#endif
-
-/* check macros for header crc */
-#ifdef GUNZIP
-#  define CRC2(check, word) \
-    do { \
-        hbuf[0] = (unsigned char)(word); \
-        hbuf[1] = (unsigned char)((word) >> 8); \
-        check = crc32(check, hbuf, 2); \
-    } while (0)
-
-#  define CRC4(check, word) \
-    do { \
-        hbuf[0] = (unsigned char)(word); \
-        hbuf[1] = (unsigned char)((word) >> 8); \
-        hbuf[2] = (unsigned char)((word) >> 16); \
-        hbuf[3] = (unsigned char)((word) >> 24); \
-        check = crc32(check, hbuf, 4); \
-    } while (0)
-#endif
-
-/* Load registers with state in inflate() for speed */
-#define LOAD() \
-    do { \
-        put = strm->next_out; \
-        left = strm->avail_out; \
-        next = strm->next_in; \
-        have = strm->avail_in; \
-        hold = state->hold; \
-        bits = state->bits; \
-    } while (0)
-
-/* Restore state from registers in inflate() */
-#define RESTORE() \
-    do { \
-        strm->next_out = put; \
-        strm->avail_out = left; \
-        strm->next_in = next; \
-        strm->avail_in = have; \
-        state->hold = hold; \
-        state->bits = bits; \
-    } while (0)
-
-/* Clear the input bit accumulator */
-#define INITBITS() \
-    do { \
-        hold = 0; \
-        bits = 0; \
-    } while (0)
-
-/* Get a byte of input into the bit accumulator, or return from inflate()
-   if there is no input available. */
-#define PULLBYTE() \
-    do { \
-        if (have == 0) goto inf_leave; \
-        have--; \
-        hold += (unsigned long)(*next++) << bits; \
-        bits += 8; \
-    } while (0)
-
-/* Assure that there are at least n bits in the bit accumulator.  If there is
-   not enough available input to do that, then return from inflate(). */
-#define NEEDBITS(n) \
-    do { \
-        while (bits < (unsigned)(n)) \
-            PULLBYTE(); \
-    } while (0)
-
-/* Return the low n bits of the bit accumulator (n < 16) */
-#define BITS(n) \
-    ((unsigned)hold & ((1U << (n)) - 1))
-
-/* Remove n bits from the bit accumulator */
-#define DROPBITS(n) \
-    do { \
-        hold >>= (n); \
-        bits -= (unsigned)(n); \
-    } while (0)
-
-/* Remove zero to seven bits as needed to go to a byte boundary */
-#define BYTEBITS() \
-    do { \
-        hold >>= bits & 7; \
-        bits -= bits & 7; \
-    } while (0)
-
-/*
-   inflate() uses a state machine to process as much input data and generate as
-   much output data as possible before returning.  The state machine is
-   structured roughly as follows:
-
-    for (;;) switch (state) {
-    ...
-    case STATEn:
-        if (not enough input data or output space to make progress)
-            return;
-        ... make progress ...
-        state = STATEm;
-        break;
-    ...
-    }
-
-   so when inflate() is called again, the same case is attempted again, and
-   if the appropriate resources are provided, the machine proceeds to the
-   next state.  The NEEDBITS() macro is usually the way the state evaluates
-   whether it can proceed or should return.  NEEDBITS() does the return if
-   the requested bits are not available.  The typical use of the BITS macros
-   is:
-
-        NEEDBITS(n);
-        ... do something with BITS(n) ...
-        DROPBITS(n);
-
-   where NEEDBITS(n) either returns from inflate() if there isn't enough
-   input left to load n bits into the accumulator, or it continues.  BITS(n)
-   gives the low n bits in the accumulator.  When done, DROPBITS(n) drops
-   the low n bits off the accumulator.  INITBITS() clears the accumulator
-   and sets the number of available bits to zero.  BYTEBITS() discards just
-   enough bits to put the accumulator on a byte boundary.  After BYTEBITS()
-   and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
-
-   NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
-   if there is no input available.  The decoding of variable length codes uses
-   PULLBYTE() directly in order to pull just enough bytes to decode the next
-   code, and no more.
-
-   Some states loop until they get enough input, making sure that enough
-   state information is maintained to continue the loop where it left off
-   if NEEDBITS() returns in the loop.  For example, want, need, and keep
-   would all have to actually be part of the saved state in case NEEDBITS()
-   returns:
-
-    case STATEw:
-        while (want < need) {
-            NEEDBITS(n);
-            keep[want++] = BITS(n);
-            DROPBITS(n);
-        }
-        state = STATEx;
-    case STATEx:
-
-   As shown above, if the next state is also the next case, then the break
-   is omitted.
-
-   A state may also return if there is not enough output space available to
-   complete that state.  Those states are copying stored data, writing a
-   literal byte, and copying a matching string.
-
-   When returning, a "goto inf_leave" is used to update the total counters,
-   update the check value, and determine whether any progress has been made
-   during that inflate() call in order to return the proper return code.
-   Progress is defined as a change in either strm->avail_in or strm->avail_out.
-   When there is a window, goto inf_leave will update the window with the last
-   output written.  If a goto inf_leave occurs in the middle of decompression
-   and there is no window currently, goto inf_leave will create one and copy
-   output to the window for the next call of inflate().
-
-   In this implementation, the flush parameter of inflate() only affects the
-   return code (per zlib.h).  inflate() always writes as much as possible to
-   strm->next_out, given the space available and the provided input--the effect
-   documented in zlib.h of Z_SYNC_FLUSH.  Furthermore, inflate() always defers
-   the allocation of and copying into a sliding window until necessary, which
-   provides the effect documented in zlib.h for Z_FINISH when the entire input
-   stream available.  So the only thing the flush parameter actually does is:
-   when flush is set to Z_FINISH, inflate() cannot return Z_OK.  Instead it
-   will return Z_BUF_ERROR if it has not reached the end of the stream.
- */
-
-int ZEXPORT inflate(strm, flush)
-z_streamp strm;
-int flush;
-{
-    struct inflate_state FAR *state;
-    z_const unsigned char FAR *next;    /* next input */
-    unsigned char FAR *put;     /* next output */
-    unsigned have, left;        /* available input and output */
-    unsigned long hold;         /* bit buffer */
-    unsigned bits;              /* bits in bit buffer */
-    unsigned in, out;           /* save starting available input and output */
-    unsigned copy;              /* number of stored or match bytes to copy */
-    unsigned char FAR *from;    /* where to copy match bytes from */
-    code here;                  /* current decoding table entry */
-    code last;                  /* parent table entry */
-    unsigned len;               /* length to copy for repeats, bits to drop */
-    int ret;                    /* return code */
-#ifdef GUNZIP
-    unsigned char hbuf[4];      /* buffer for gzip header crc calculation */
-#endif
-    static const unsigned short order[19] = /* permutation of code lengths */
-        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-    if (inflateStateCheck(strm) || strm->next_out == Z_NULL ||
-        (strm->next_in == Z_NULL && strm->avail_in != 0))
-        return Z_STREAM_ERROR;
-
-    state = (struct inflate_state FAR *)strm->state;
-    if (state->mode == TYPE) state->mode = TYPEDO;      /* skip check */
-    LOAD();
-    in = have;
-    out = left;
-    ret = Z_OK;
-    for (;;)
-        switch (state->mode) {
-        case HEAD:
-            if (state->wrap == 0) {
-                state->mode = TYPEDO;
-                break;
-            }
-            NEEDBITS(16);
-#ifdef GUNZIP
-            if ((state->wrap & 2) && hold == 0x8b1f) {  /* gzip header */
-                if (state->wbits == 0)
-                    state->wbits = 15;
-                state->check = crc32(0L, Z_NULL, 0);
-                CRC2(state->check, hold);
-                INITBITS();
-                state->mode = FLAGS;
-                break;
-            }
-            state->flags = 0;           /* expect zlib header */
-            if (state->head != Z_NULL)
-                state->head->done = -1;
-            if (!(state->wrap & 1) ||   /* check if zlib header allowed */
-#else
-            if (
-#endif
-                ((BITS(8) << 8) + (hold >> 8)) % 31) {
-                strm->msg = (char *)"incorrect header check";
-                state->mode = BAD;
-                break;
-            }
-            if (BITS(4) != Z_DEFLATED) {
-                strm->msg = (char *)"unknown compression method";
-                state->mode = BAD;
-                break;
-            }
-            DROPBITS(4);
-            len = BITS(4) + 8;
-            if (state->wbits == 0)
-                state->wbits = len;
-            if (len > 15 || len > state->wbits) {
-                strm->msg = (char *)"invalid window size";
-                state->mode = BAD;
-                break;
-            }
-            state->dmax = 1U << len;
-            Tracev((stderr, "inflate:   zlib header ok\n"));
-            strm->adler = state->check = adler32(0L, Z_NULL, 0);
-            state->mode = hold & 0x200 ? DICTID : TYPE;
-            INITBITS();
-            break;
-#ifdef GUNZIP
-        case FLAGS:
-            NEEDBITS(16);
-            state->flags = (int)(hold);
-            if ((state->flags & 0xff) != Z_DEFLATED) {
-                strm->msg = (char *)"unknown compression method";
-                state->mode = BAD;
-                break;
-            }
-            if (state->flags & 0xe000) {
-                strm->msg = (char *)"unknown header flags set";
-                state->mode = BAD;
-                break;
-            }
-            if (state->head != Z_NULL)
-                state->head->text = (int)((hold >> 8) & 1);
-            if ((state->flags & 0x0200) && (state->wrap & 4))
-                CRC2(state->check, hold);
-            INITBITS();
-            state->mode = TIME;
-        case TIME:
-            NEEDBITS(32);
-            if (state->head != Z_NULL)
-                state->head->time = hold;
-            if ((state->flags & 0x0200) && (state->wrap & 4))
-                CRC4(state->check, hold);
-            INITBITS();
-            state->mode = OS;
-        case OS:
-            NEEDBITS(16);
-            if (state->head != Z_NULL) {
-                state->head->xflags = (int)(hold & 0xff);
-                state->head->os = (int)(hold >> 8);
-            }
-            if ((state->flags & 0x0200) && (state->wrap & 4))
-                CRC2(state->check, hold);
-            INITBITS();
-            state->mode = EXLEN;
-        case EXLEN:
-            if (state->flags & 0x0400) {
-                NEEDBITS(16);
-                state->length = (unsigned)(hold);
-                if (state->head != Z_NULL)
-                    state->head->extra_len = (unsigned)hold;
-                if ((state->flags & 0x0200) && (state->wrap & 4))
-                    CRC2(state->check, hold);
-                INITBITS();
-            }
-            else if (state->head != Z_NULL)
-                state->head->extra = Z_NULL;
-            state->mode = EXTRA;
-        case EXTRA:
-            if (state->flags & 0x0400) {
-                copy = state->length;
-                if (copy > have) copy = have;
-                if (copy) {
-                    if (state->head != Z_NULL &&
-                        state->head->extra != Z_NULL) {
-                        len = state->head->extra_len - state->length;
-                        zmemcpy(state->head->extra + len, next,
-                                len + copy > state->head->extra_max ?
-                                state->head->extra_max - len : copy);
-                    }
-                    if ((state->flags & 0x0200) && (state->wrap & 4))
-                        state->check = crc32(state->check, next, copy);
-                    have -= copy;
-                    next += copy;
-                    state->length -= copy;
-                }
-                if (state->length) goto inf_leave;
-            }
-            state->length = 0;
-            state->mode = NAME;
-        case NAME:
-            if (state->flags & 0x0800) {
-                if (have == 0) goto inf_leave;
-                copy = 0;
-                do {
-                    len = (unsigned)(next[copy++]);
-                    if (state->head != Z_NULL &&
-                            state->head->name != Z_NULL &&
-                            state->length < state->head->name_max)
-                        state->head->name[state->length++] = (Bytef)len;
-                } while (len && copy < have);
-                if ((state->flags & 0x0200) && (state->wrap & 4))
-                    state->check = crc32(state->check, next, copy);
-                have -= copy;
-                next += copy;
-                if (len) goto inf_leave;
-            }
-            else if (state->head != Z_NULL)
-                state->head->name = Z_NULL;
-            state->length = 0;
-            state->mode = COMMENT;
-        case COMMENT:
-            if (state->flags & 0x1000) {
-                if (have == 0) goto inf_leave;
-                copy = 0;
-                do {
-                    len = (unsigned)(next[copy++]);
-                    if (state->head != Z_NULL &&
-                            state->head->comment != Z_NULL &&
-                            state->length < state->head->comm_max)
-                        state->head->comment[state->length++] = (Bytef)len;
-                } while (len && copy < have);
-                if ((state->flags & 0x0200) && (state->wrap & 4))
-                    state->check = crc32(state->check, next, copy);
-                have -= copy;
-                next += copy;
-                if (len) goto inf_leave;
-            }
-            else if (state->head != Z_NULL)
-                state->head->comment = Z_NULL;
-            state->mode = HCRC;
-        case HCRC:
-            if (state->flags & 0x0200) {
-                NEEDBITS(16);
-                if ((state->wrap & 4) && hold != (state->check & 0xffff)) {
-                    strm->msg = (char *)"header crc mismatch";
-                    state->mode = BAD;
-                    break;
-                }
-                INITBITS();
-            }
-            if (state->head != Z_NULL) {
-                state->head->hcrc = (int)((state->flags >> 9) & 1);
-                state->head->done = 1;
-            }
-            strm->adler = state->check = crc32(0L, Z_NULL, 0);
-            state->mode = TYPE;
-            break;
-#endif
-        case DICTID:
-            NEEDBITS(32);
-            strm->adler = state->check = ZSWAP32(hold);
-            INITBITS();
-            state->mode = DICT;
-        case DICT:
-            if (state->havedict == 0) {
-                RESTORE();
-                return Z_NEED_DICT;
-            }
-            strm->adler = state->check = adler32(0L, Z_NULL, 0);
-            state->mode = TYPE;
-        case TYPE:
-            if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
-        case TYPEDO:
-            if (state->last) {
-                BYTEBITS();
-                state->mode = CHECK;
-                break;
-            }
-            NEEDBITS(3);
-            state->last = BITS(1);
-            DROPBITS(1);
-            switch (BITS(2)) {
-            case 0:                             /* stored block */
-                Tracev((stderr, "inflate:     stored block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = STORED;
-                break;
-            case 1:                             /* fixed block */
-                fixedtables(state);
-                Tracev((stderr, "inflate:     fixed codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = LEN_;             /* decode codes */
-                if (flush == Z_TREES) {
-                    DROPBITS(2);
-                    goto inf_leave;
-                }
-                break;
-            case 2:                             /* dynamic block */
-                Tracev((stderr, "inflate:     dynamic codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = TABLE;
-                break;
-            case 3:
-                strm->msg = (char *)"invalid block type";
-                state->mode = BAD;
-            }
-            DROPBITS(2);
-            break;
-        case STORED:
-            BYTEBITS();                         /* go to byte boundary */
-            NEEDBITS(32);
-            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
-                strm->msg = (char *)"invalid stored block lengths";
-                state->mode = BAD;
-                break;
-            }
-            state->length = (unsigned)hold & 0xffff;
-            Tracev((stderr, "inflate:       stored length %u\n",
-                    state->length));
-            INITBITS();
-            state->mode = COPY_;
-            if (flush == Z_TREES) goto inf_leave;
-        case COPY_:
-            state->mode = COPY;
-        case COPY:
-            copy = state->length;
-            if (copy) {
-                if (copy > have) copy = have;
-                if (copy > left) copy = left;
-                if (copy == 0) goto inf_leave;
-                zmemcpy(put, next, copy);
-                have -= copy;
-                next += copy;
-                left -= copy;
-                put += copy;
-                state->length -= copy;
-                break;
-            }
-            Tracev((stderr, "inflate:       stored end\n"));
-            state->mode = TYPE;
-            break;
-        case TABLE:
-            NEEDBITS(14);
-            state->nlen = BITS(5) + 257;
-            DROPBITS(5);
-            state->ndist = BITS(5) + 1;
-            DROPBITS(5);
-            state->ncode = BITS(4) + 4;
-            DROPBITS(4);
-#ifndef PKZIP_BUG_WORKAROUND
-            if (state->nlen > 286 || state->ndist > 30) {
-                strm->msg = (char *)"too many length or distance symbols";
-                state->mode = BAD;
-                break;
-            }
-#endif
-            Tracev((stderr, "inflate:       table sizes ok\n"));
-            state->have = 0;
-            state->mode = LENLENS;
-        case LENLENS:
-            while (state->have < state->ncode) {
-                NEEDBITS(3);
-                state->lens[order[state->have++]] = (unsigned short)BITS(3);
-                DROPBITS(3);
-            }
-            while (state->have < 19)
-                state->lens[order[state->have++]] = 0;
-            state->next = state->codes;
-            state->lencode = (const code FAR *)(state->next);
-            state->lenbits = 7;
-            ret = inflate_table(CODES, state->lens, 19, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid code lengths set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       code lengths ok\n"));
-            state->have = 0;
-            state->mode = CODELENS;
-        case CODELENS:
-            while (state->have < state->nlen + state->ndist) {
-                for (;;) {
-                    here = state->lencode[BITS(state->lenbits)];
-                    if ((unsigned)(here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                if (here.val < 16) {
-                    DROPBITS(here.bits);
-                    state->lens[state->have++] = here.val;
-                }
-                else {
-                    if (here.val == 16) {
-                        NEEDBITS(here.bits + 2);
-                        DROPBITS(here.bits);
-                        if (state->have == 0) {
-                            strm->msg = (char *)"invalid bit length repeat";
-                            state->mode = BAD;
-                            break;
-                        }
-                        len = state->lens[state->have - 1];
-                        copy = 3 + BITS(2);
-                        DROPBITS(2);
-                    }
-                    else if (here.val == 17) {
-                        NEEDBITS(here.bits + 3);
-                        DROPBITS(here.bits);
-                        len = 0;
-                        copy = 3 + BITS(3);
-                        DROPBITS(3);
-                    }
-                    else {
-                        NEEDBITS(here.bits + 7);
-                        DROPBITS(here.bits);
-                        len = 0;
-                        copy = 11 + BITS(7);
-                        DROPBITS(7);
-                    }
-                    if (state->have + copy > state->nlen + state->ndist) {
-                        strm->msg = (char *)"invalid bit length repeat";
-                        state->mode = BAD;
-                        break;
-                    }
-                    while (copy--)
-                        state->lens[state->have++] = (unsigned short)len;
-                }
-            }
-
-            /* handle error breaks in while */
-            if (state->mode == BAD) break;
-
-            /* check for end-of-block code (better have one) */
-            if (state->lens[256] == 0) {
-                strm->msg = (char *)"invalid code -- missing end-of-block";
-                state->mode = BAD;
-                break;
-            }
-
-            /* build code tables -- note: do not change the lenbits or distbits
-               values here (9 and 6) without reading the comments in inftrees.h
-               concerning the ENOUGH constants, which depend on those values */
-            state->next = state->codes;
-            state->lencode = (const code FAR *)(state->next);
-            state->lenbits = 9;
-            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid literal/lengths set";
-                state->mode = BAD;
-                break;
-            }
-            state->distcode = (const code FAR *)(state->next);
-            state->distbits = 6;
-            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
-                            &(state->next), &(state->distbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid distances set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       codes ok\n"));
-            state->mode = LEN_;
-            if (flush == Z_TREES) goto inf_leave;
-        case LEN_:
-            state->mode = LEN;
-        case LEN:
-            if (have >= 6 && left >= 258) {
-                RESTORE();
-                inflate_fast(strm, out);
-                LOAD();
-                if (state->mode == TYPE)
-                    state->back = -1;
-                break;
-            }
-            state->back = 0;
-            for (;;) {
-                here = state->lencode[BITS(state->lenbits)];
-                if ((unsigned)(here.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if (here.op && (here.op & 0xf0) == 0) {
-                last = here;
-                for (;;) {
-                    here = state->lencode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-                state->back += last.bits;
-            }
-            DROPBITS(here.bits);
-            state->back += here.bits;
-            state->length = (unsigned)here.val;
-            if ((int)(here.op) == 0) {
-                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
-                        "inflate:         literal '%c'\n" :
-                        "inflate:         literal 0x%02x\n", here.val));
-                state->mode = LIT;
-                break;
-            }
-            if (here.op & 32) {
-                Tracevv((stderr, "inflate:         end of block\n"));
-                state->back = -1;
-                state->mode = TYPE;
-                break;
-            }
-            if (here.op & 64) {
-                strm->msg = (char *)"invalid literal/length code";
-                state->mode = BAD;
-                break;
-            }
-            state->extra = (unsigned)(here.op) & 15;
-            state->mode = LENEXT;
-        case LENEXT:
-            if (state->extra) {
-                NEEDBITS(state->extra);
-                state->length += BITS(state->extra);
-                DROPBITS(state->extra);
-                state->back += state->extra;
-            }
-            Tracevv((stderr, "inflate:         length %u\n", state->length));
-            state->was = state->length;
-            state->mode = DIST;
-        case DIST:
-            for (;;) {
-                here = state->distcode[BITS(state->distbits)];
-                if ((unsigned)(here.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if ((here.op & 0xf0) == 0) {
-                last = here;
-                for (;;) {
-                    here = state->distcode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-                state->back += last.bits;
-            }
-            DROPBITS(here.bits);
-            state->back += here.bits;
-            if (here.op & 64) {
-                strm->msg = (char *)"invalid distance code";
-                state->mode = BAD;
-                break;
-            }
-            state->offset = (unsigned)here.val;
-            state->extra = (unsigned)(here.op) & 15;
-            state->mode = DISTEXT;
-        case DISTEXT:
-            if (state->extra) {
-                NEEDBITS(state->extra);
-                state->offset += BITS(state->extra);
-                DROPBITS(state->extra);
-                state->back += state->extra;
-            }
-#ifdef INFLATE_STRICT
-            if (state->offset > state->dmax) {
-                strm->msg = (char *)"invalid distance too far back";
-                state->mode = BAD;
-                break;
-            }
-#endif
-            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
-            state->mode = MATCH;
-        case MATCH:
-            if (left == 0) goto inf_leave;
-            copy = out - left;
-            if (state->offset > copy) {         /* copy from window */
-                copy = state->offset - copy;
-                if (copy > state->whave) {
-                    if (state->sane) {
-                        strm->msg = (char *)"invalid distance too far back";
-                        state->mode = BAD;
-                        break;
-                    }
-#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
-                    Trace((stderr, "inflate.c too far\n"));
-                    copy -= state->whave;
-                    if (copy > state->length) copy = state->length;
-                    if (copy > left) copy = left;
-                    left -= copy;
-                    state->length -= copy;
-                    do {
-                        *put++ = 0;
-                    } while (--copy);
-                    if (state->length == 0) state->mode = LEN;
-                    break;
-#endif
-                }
-                if (copy > state->wnext) {
-                    copy -= state->wnext;
-                    from = state->window + (state->wsize - copy);
-                }
-                else
-                    from = state->window + (state->wnext - copy);
-                if (copy > state->length) copy = state->length;
-            }
-            else {                              /* copy from output */
-                from = put - state->offset;
-                copy = state->length;
-            }
-            if (copy > left) copy = left;
-            left -= copy;
-            state->length -= copy;
-            do {
-                *put++ = *from++;
-            } while (--copy);
-            if (state->length == 0) state->mode = LEN;
-            break;
-        case LIT:
-            if (left == 0) goto inf_leave;
-            *put++ = (unsigned char)(state->length);
-            left--;
-            state->mode = LEN;
-            break;
-        case CHECK:
-            if (state->wrap) {
-                NEEDBITS(32);
-                out -= left;
-                strm->total_out += out;
-                state->total += out;
-                if ((state->wrap & 4) && out)
-                    strm->adler = state->check =
-                        UPDATE(state->check, put - out, out);
-                out = left;
-                if ((state->wrap & 4) && (
-#ifdef GUNZIP
-                     state->flags ? hold :
-#endif
-                     ZSWAP32(hold)) != state->check) {
-                    strm->msg = (char *)"incorrect data check";
-                    state->mode = BAD;
-                    break;
-                }
-                INITBITS();
-                Tracev((stderr, "inflate:   check matches trailer\n"));
-            }
-#ifdef GUNZIP
-            state->mode = LENGTH;
-        case LENGTH:
-            if (state->wrap && state->flags) {
-                NEEDBITS(32);
-                if (hold != (state->total & 0xffffffffUL)) {
-                    strm->msg = (char *)"incorrect length check";
-                    state->mode = BAD;
-                    break;
-                }
-                INITBITS();
-                Tracev((stderr, "inflate:   length matches trailer\n"));
-            }
-#endif
-            state->mode = DONE;
-        case DONE:
-            ret = Z_STREAM_END;
-            goto inf_leave;
-        case BAD:
-            ret = Z_DATA_ERROR;
-            goto inf_leave;
-        case MEM:
-            return Z_MEM_ERROR;
-        case SYNC:
-        default:
-            return Z_STREAM_ERROR;
-        }
-
-    /*
-       Return from inflate(), updating the total counts and the check value.
-       If there was no progress during the inflate() call, return a buffer
-       error.  Call updatewindow() to create and/or update the window state.
-       Note: a memory error from inflate() is non-recoverable.
-     */
-  inf_leave:
-    RESTORE();
-    if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
-            (state->mode < CHECK || flush != Z_FINISH)))
-        if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
-            state->mode = MEM;
-            return Z_MEM_ERROR;
-        }
-    in -= strm->avail_in;
-    out -= strm->avail_out;
-    strm->total_in += in;
-    strm->total_out += out;
-    state->total += out;
-    if ((state->wrap & 4) && out)
-        strm->adler = state->check =
-            UPDATE(state->check, strm->next_out - out, out);
-    strm->data_type = (int)state->bits + (state->last ? 64 : 0) +
-                      (state->mode == TYPE ? 128 : 0) +
-                      (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
-    if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
-        ret = Z_BUF_ERROR;
-    return ret;
-}
-
-int ZEXPORT inflateEnd(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-    if (inflateStateCheck(strm))
-        return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if (state->window != Z_NULL) ZFREE(strm, state->window);
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-    Tracev((stderr, "inflate: end\n"));
-    return Z_OK;
-}
-
-int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
-z_streamp strm;
-Bytef *dictionary;
-uInt *dictLength;
-{
-    struct inflate_state FAR *state;
-
-    /* check state */
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-
-    /* copy dictionary */
-    if (state->whave && dictionary != Z_NULL) {
-        zmemcpy(dictionary, state->window + state->wnext,
-                state->whave - state->wnext);
-        zmemcpy(dictionary + state->whave - state->wnext,
-                state->window, state->wnext);
-    }
-    if (dictLength != Z_NULL)
-        *dictLength = state->whave;
-    return Z_OK;
-}
-
-int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
-z_streamp strm;
-const Bytef *dictionary;
-uInt dictLength;
-{
-    struct inflate_state FAR *state;
-    unsigned long dictid;
-    int ret;
-
-    /* check state */
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if (state->wrap != 0 && state->mode != DICT)
-        return Z_STREAM_ERROR;
-
-    /* check for correct dictionary identifier */
-    if (state->mode == DICT) {
-        dictid = adler32(0L, Z_NULL, 0);
-        dictid = adler32(dictid, dictionary, dictLength);
-        if (dictid != state->check)
-            return Z_DATA_ERROR;
-    }
-
-    /* copy dictionary to window using updatewindow(), which will amend the
-       existing dictionary if appropriate */
-    ret = updatewindow(strm, dictionary + dictLength, dictLength);
-    if (ret) {
-        state->mode = MEM;
-        return Z_MEM_ERROR;
-    }
-    state->havedict = 1;
-    Tracev((stderr, "inflate:   dictionary set\n"));
-    return Z_OK;
-}
-
-int ZEXPORT inflateGetHeader(strm, head)
-z_streamp strm;
-gz_headerp head;
-{
-    struct inflate_state FAR *state;
-
-    /* check state */
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
-
-    /* save header structure */
-    state->head = head;
-    head->done = 0;
-    return Z_OK;
-}
-
-/*
-   Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff.  Return when found
-   or when out of input.  When called, *have is the number of pattern bytes
-   found in order so far, in 0..3.  On return *have is updated to the new
-   state.  If on return *have equals four, then the pattern was found and the
-   return value is how many bytes were read including the last byte of the
-   pattern.  If *have is less than four, then the pattern has not been found
-   yet and the return value is len.  In the latter case, syncsearch() can be
-   called again with more data and the *have state.  *have is initialized to
-   zero for the first call.
- */
-local unsigned syncsearch(have, buf, len)
-unsigned FAR *have;
-const unsigned char FAR *buf;
-unsigned len;
-{
-    unsigned got;
-    unsigned next;
-
-    got = *have;
-    next = 0;
-    while (next < len && got < 4) {
-        if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
-            got++;
-        else if (buf[next])
-            got = 0;
-        else
-            got = 4 - got;
-        next++;
-    }
-    *have = got;
-    return next;
-}
-
-int ZEXPORT inflateSync(strm)
-z_streamp strm;
-{
-    unsigned len;               /* number of bytes to look at or looked at */
-    unsigned long in, out;      /* temporary to save total_in and total_out */
-    unsigned char buf[4];       /* to restore bit buffer to byte string */
-    struct inflate_state FAR *state;
-
-    /* check parameters */
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
-
-    /* if first time, start search in bit buffer */
-    if (state->mode != SYNC) {
-        state->mode = SYNC;
-        state->hold <<= state->bits & 7;
-        state->bits -= state->bits & 7;
-        len = 0;
-        while (state->bits >= 8) {
-            buf[len++] = (unsigned char)(state->hold);
-            state->hold >>= 8;
-            state->bits -= 8;
-        }
-        state->have = 0;
-        syncsearch(&(state->have), buf, len);
-    }
-
-    /* search available input */
-    len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
-    strm->avail_in -= len;
-    strm->next_in += len;
-    strm->total_in += len;
-
-    /* return no joy or set up to restart inflate() on a new block */
-    if (state->have != 4) return Z_DATA_ERROR;
-    in = strm->total_in;  out = strm->total_out;
-    inflateReset(strm);
-    strm->total_in = in;  strm->total_out = out;
-    state->mode = TYPE;
-    return Z_OK;
-}
-
-/*
-   Returns true if inflate is currently at the end of a block generated by
-   Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
-   implementation to provide an additional safety check. PPP uses
-   Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
-   block. When decompressing, PPP checks that at the end of input packet,
-   inflate is waiting for these length bytes.
- */
-int ZEXPORT inflateSyncPoint(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    return state->mode == STORED && state->bits == 0;
-}
-
-int ZEXPORT inflateCopy(dest, source)
-z_streamp dest;
-z_streamp source;
-{
-    struct inflate_state FAR *state;
-    struct inflate_state FAR *copy;
-    unsigned char FAR *window;
-    unsigned wsize;
-
-    /* check input */
-    if (inflateStateCheck(source) || dest == Z_NULL)
-        return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)source->state;
-
-    /* allocate space */
-    copy = (struct inflate_state FAR *)
-           ZALLOC(source, 1, sizeof(struct inflate_state));
-    if (copy == Z_NULL) return Z_MEM_ERROR;
-    window = Z_NULL;
-    if (state->window != Z_NULL) {
-        window = (unsigned char FAR *)
-                 ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
-        if (window == Z_NULL) {
-            ZFREE(source, copy);
-            return Z_MEM_ERROR;
-        }
-    }
-
-    /* copy state */
-    zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
-    zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
-    copy->strm = dest;
-    if (state->lencode >= state->codes &&
-        state->lencode <= state->codes + ENOUGH - 1) {
-        copy->lencode = copy->codes + (state->lencode - state->codes);
-        copy->distcode = copy->codes + (state->distcode - state->codes);
-    }
-    copy->next = copy->codes + (state->next - state->codes);
-    if (window != Z_NULL) {
-        wsize = 1U << state->wbits;
-        zmemcpy(window, state->window, wsize);
-    }
-    copy->window = window;
-    dest->state = (struct internal_state FAR *)copy;
-    return Z_OK;
-}
-
-int ZEXPORT inflateUndermine(strm, subvert)
-z_streamp strm;
-int subvert;
-{
-    struct inflate_state FAR *state;
-
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
-    state->sane = !subvert;
-    return Z_OK;
-#else
-    (void)subvert;
-    state->sane = 1;
-    return Z_DATA_ERROR;
-#endif
-}
-
-int ZEXPORT inflateValidate(strm, check)
-z_streamp strm;
-int check;
-{
-    struct inflate_state FAR *state;
-
-    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if (check)
-        state->wrap |= 4;
-    else
-        state->wrap &= ~4;
-    return Z_OK;
-}
-
-long ZEXPORT inflateMark(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-
-    if (inflateStateCheck(strm))
-        return -(1L << 16);
-    state = (struct inflate_state FAR *)strm->state;
-    return (long)(((unsigned long)((long)state->back)) << 16) +
-        (state->mode == COPY ? state->length :
-            (state->mode == MATCH ? state->was - state->length : 0));
-}
-
-unsigned long ZEXPORT inflateCodesUsed(strm)
-z_streamp strm;
-{
-    struct inflate_state FAR *state;
-    if (inflateStateCheck(strm)) return (unsigned long)-1;
-    state = (struct inflate_state FAR *)strm->state;
-    return (unsigned long)(state->next - state->codes);
-}
diff --git a/Modules/zlib/inflate.h b/Modules/zlib/inflate.h
deleted file mode 100644
index a46cce6..0000000
--- a/Modules/zlib/inflate.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/* inflate.h -- internal inflate state definition
- * Copyright (C) 1995-2016 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
-   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
-   the crc code when it is not needed.  For shared libraries, gzip decoding
-   should be left enabled. */
-#ifndef NO_GZIP
-#  define GUNZIP
-#endif
-
-/* Possible inflate modes between inflate() calls */
-typedef enum {
-    HEAD = 16180,   /* i: waiting for magic header */
-    FLAGS,      /* i: waiting for method and flags (gzip) */
-    TIME,       /* i: waiting for modification time (gzip) */
-    OS,         /* i: waiting for extra flags and operating system (gzip) */
-    EXLEN,      /* i: waiting for extra length (gzip) */
-    EXTRA,      /* i: waiting for extra bytes (gzip) */
-    NAME,       /* i: waiting for end of file name (gzip) */
-    COMMENT,    /* i: waiting for end of comment (gzip) */
-    HCRC,       /* i: waiting for header crc (gzip) */
-    DICTID,     /* i: waiting for dictionary check value */
-    DICT,       /* waiting for inflateSetDictionary() call */
-        TYPE,       /* i: waiting for type bits, including last-flag bit */
-        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
-        STORED,     /* i: waiting for stored size (length and complement) */
-        COPY_,      /* i/o: same as COPY below, but only first time in */
-        COPY,       /* i/o: waiting for input or output to copy stored block */
-        TABLE,      /* i: waiting for dynamic block table lengths */
-        LENLENS,    /* i: waiting for code length code lengths */
-        CODELENS,   /* i: waiting for length/lit and distance code lengths */
-            LEN_,       /* i: same as LEN below, but only first time in */
-            LEN,        /* i: waiting for length/lit/eob code */
-            LENEXT,     /* i: waiting for length extra bits */
-            DIST,       /* i: waiting for distance code */
-            DISTEXT,    /* i: waiting for distance extra bits */
-            MATCH,      /* o: waiting for output space to copy string */
-            LIT,        /* o: waiting for output space to write literal */
-    CHECK,      /* i: waiting for 32-bit check value */
-    LENGTH,     /* i: waiting for 32-bit length (gzip) */
-    DONE,       /* finished check, done -- remain here until reset */
-    BAD,        /* got a data error -- remain here until reset */
-    MEM,        /* got an inflate() memory error -- remain here until reset */
-    SYNC        /* looking for synchronization bytes to restart inflate() */
-} inflate_mode;
-
-/*
-    State transitions between above modes -
-
-    (most modes can go to BAD or MEM on error -- not shown for clarity)
-
-    Process header:
-        HEAD -> (gzip) or (zlib) or (raw)
-        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
-                  HCRC -> TYPE
-        (zlib) -> DICTID or TYPE
-        DICTID -> DICT -> TYPE
-        (raw) -> TYPEDO
-    Read deflate blocks:
-            TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
-            STORED -> COPY_ -> COPY -> TYPE
-            TABLE -> LENLENS -> CODELENS -> LEN_
-            LEN_ -> LEN
-    Read deflate codes in fixed or dynamic block:
-                LEN -> LENEXT or LIT or TYPE
-                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
-                LIT -> LEN
-    Process trailer:
-        CHECK -> LENGTH -> DONE
- */
-
-/* State maintained between inflate() calls -- approximately 7K bytes, not
-   including the allocated sliding window, which is up to 32K bytes. */
-struct inflate_state {
-    z_streamp strm;             /* pointer back to this zlib stream */
-    inflate_mode mode;          /* current inflate mode */
-    int last;                   /* true if processing last block */
-    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip,
-                                   bit 2 true to validate check value */
-    int havedict;               /* true if dictionary provided */
-    int flags;                  /* gzip header method and flags (0 if zlib) */
-    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
-    unsigned long check;        /* protected copy of check value */
-    unsigned long total;        /* protected copy of output count */
-    gz_headerp head;            /* where to save gzip header information */
-        /* sliding window */
-    unsigned wbits;             /* log base 2 of requested window size */
-    unsigned wsize;             /* window size or zero if not using window */
-    unsigned whave;             /* valid bytes in the window */
-    unsigned wnext;             /* window write index */
-    unsigned char FAR *window;  /* allocated sliding window, if needed */
-        /* bit accumulator */
-    unsigned long hold;         /* input bit accumulator */
-    unsigned bits;              /* number of bits in "in" */
-        /* for string and stored block copying */
-    unsigned length;            /* literal or length of data to copy */
-    unsigned offset;            /* distance back to copy string from */
-        /* for table and code decoding */
-    unsigned extra;             /* extra bits needed */
-        /* fixed and dynamic code tables */
-    code const FAR *lencode;    /* starting table for length/literal codes */
-    code const FAR *distcode;   /* starting table for distance codes */
-    unsigned lenbits;           /* index bits for lencode */
-    unsigned distbits;          /* index bits for distcode */
-        /* dynamic table building */
-    unsigned ncode;             /* number of code length code lengths */
-    unsigned nlen;              /* number of length code lengths */
-    unsigned ndist;             /* number of distance code lengths */
-    unsigned have;              /* number of code lengths in lens[] */
-    code FAR *next;             /* next available space in codes[] */
-    unsigned short lens[320];   /* temporary storage for code lengths */
-    unsigned short work[288];   /* work area for code table building */
-    code codes[ENOUGH];         /* space for code tables */
-    int sane;                   /* if false, allow invalid distance too far */
-    int back;                   /* bits back of last unprocessed length/lit */
-    unsigned was;               /* initial length of match */
-};
diff --git a/Modules/zlib/inftrees.c b/Modules/zlib/inftrees.c
deleted file mode 100644
index 2ea08fc..0000000
--- a/Modules/zlib/inftrees.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2017 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-
-#define MAXBITS 15
-
-const char inflate_copyright[] =
-   " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/*
-   Build a set of tables to decode the provided canonical Huffman code.
-   The code lengths are lens[0..codes-1].  The result starts at *table,
-   whose indices are 0..2^bits-1.  work is a writable array of at least
-   lens shorts, which is used as a work area.  type is the type of code
-   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
-   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
-   on return points to the next available entry's address.  bits is the
-   requested root table index bits, and on return it is the actual root
-   table index bits.  It will differ if the request is greater than the
-   longest code or if it is less than the shortest code.
- */
-int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
-codetype type;
-unsigned short FAR *lens;
-unsigned codes;
-code FAR * FAR *table;
-unsigned FAR *bits;
-unsigned short FAR *work;
-{
-    unsigned len;               /* a code's length in bits */
-    unsigned sym;               /* index of code symbols */
-    unsigned min, max;          /* minimum and maximum code lengths */
-    unsigned root;              /* number of index bits for root table */
-    unsigned curr;              /* number of index bits for current table */
-    unsigned drop;              /* code bits to drop for sub-table */
-    int left;                   /* number of prefix codes available */
-    unsigned used;              /* code entries in table used */
-    unsigned huff;              /* Huffman code */
-    unsigned incr;              /* for incrementing code, index */
-    unsigned fill;              /* index for replicating entries */
-    unsigned low;               /* low bits for current root entry */
-    unsigned mask;              /* mask for low root bits */
-    code here;                  /* table entry for duplication */
-    code FAR *next;             /* next available space in table */
-    const unsigned short FAR *base;     /* base value table to use */
-    const unsigned short FAR *extra;    /* extra bits table to use */
-    unsigned match;             /* use base and extra for symbol >= match */
-    unsigned short count[MAXBITS+1];    /* number of codes of each length */
-    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
-    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
-        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
-    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577, 0, 0};
-    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
-        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
-        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
-        28, 28, 29, 29, 64, 64};
-
-    /*
-       Process a set of code lengths to create a canonical Huffman code.  The
-       code lengths are lens[0..codes-1].  Each length corresponds to the
-       symbols 0..codes-1.  The Huffman code is generated by first sorting the
-       symbols by length from short to long, and retaining the symbol order
-       for codes with equal lengths.  Then the code starts with all zero bits
-       for the first code of the shortest length, and the codes are integer
-       increments for the same length, and zeros are appended as the length
-       increases.  For the deflate format, these bits are stored backwards
-       from their more natural integer increment ordering, and so when the
-       decoding tables are built in the large loop below, the integer codes
-       are incremented backwards.
-
-       This routine assumes, but does not check, that all of the entries in
-       lens[] are in the range 0..MAXBITS.  The caller must assure this.
-       1..MAXBITS is interpreted as that code length.  zero means that that
-       symbol does not occur in this code.
-
-       The codes are sorted by computing a count of codes for each length,
-       creating from that a table of starting indices for each length in the
-       sorted table, and then entering the symbols in order in the sorted
-       table.  The sorted table is work[], with that space being provided by
-       the caller.
-
-       The length counts are used for other purposes as well, i.e. finding
-       the minimum and maximum length codes, determining if there are any
-       codes at all, checking for a valid set of lengths, and looking ahead
-       at length counts to determine sub-table sizes when building the
-       decoding tables.
-     */
-
-    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
-    for (len = 0; len <= MAXBITS; len++)
-        count[len] = 0;
-    for (sym = 0; sym < codes; sym++)
-        count[lens[sym]]++;
-
-    /* bound code lengths, force root to be within code lengths */
-    root = *bits;
-    for (max = MAXBITS; max >= 1; max--)
-        if (count[max] != 0) break;
-    if (root > max) root = max;
-    if (max == 0) {                     /* no symbols to code at all */
-        here.op = (unsigned char)64;    /* invalid code marker */
-        here.bits = (unsigned char)1;
-        here.val = (unsigned short)0;
-        *(*table)++ = here;             /* make a table to force an error */
-        *(*table)++ = here;
-        *bits = 1;
-        return 0;     /* no symbols, but wait for decoding to report error */
-    }
-    for (min = 1; min < max; min++)
-        if (count[min] != 0) break;
-    if (root < min) root = min;
-
-    /* check for an over-subscribed or incomplete set of lengths */
-    left = 1;
-    for (len = 1; len <= MAXBITS; len++) {
-        left <<= 1;
-        left -= count[len];
-        if (left < 0) return -1;        /* over-subscribed */
-    }
-    if (left > 0 && (type == CODES || max != 1))
-        return -1;                      /* incomplete set */
-
-    /* generate offsets into symbol table for each length for sorting */
-    offs[1] = 0;
-    for (len = 1; len < MAXBITS; len++)
-        offs[len + 1] = offs[len] + count[len];
-
-    /* sort symbols by length, by symbol order within each length */
-    for (sym = 0; sym < codes; sym++)
-        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
-
-    /*
-       Create and fill in decoding tables.  In this loop, the table being
-       filled is at next and has curr index bits.  The code being used is huff
-       with length len.  That code is converted to an index by dropping drop
-       bits off of the bottom.  For codes where len is less than drop + curr,
-       those top drop + curr - len bits are incremented through all values to
-       fill the table with replicated entries.
-
-       root is the number of index bits for the root table.  When len exceeds
-       root, sub-tables are created pointed to by the root entry with an index
-       of the low root bits of huff.  This is saved in low to check for when a
-       new sub-table should be started.  drop is zero when the root table is
-       being filled, and drop is root when sub-tables are being filled.
-
-       When a new sub-table is needed, it is necessary to look ahead in the
-       code lengths to determine what size sub-table is needed.  The length
-       counts are used for this, and so count[] is decremented as codes are
-       entered in the tables.
-
-       used keeps track of how many table entries have been allocated from the
-       provided *table space.  It is checked for LENS and DIST tables against
-       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
-       the initial root table size constants.  See the comments in inftrees.h
-       for more information.
-
-       sym increments through all symbols, and the loop terminates when
-       all codes of length max, i.e. all codes, have been processed.  This
-       routine permits incomplete codes, so another loop after this one fills
-       in the rest of the decoding tables with invalid code markers.
-     */
-
-    /* set up for code type */
-    switch (type) {
-    case CODES:
-        base = extra = work;    /* dummy value--not used */
-        match = 20;
-        break;
-    case LENS:
-        base = lbase;
-        extra = lext;
-        match = 257;
-        break;
-    default:    /* DISTS */
-        base = dbase;
-        extra = dext;
-        match = 0;
-    }
-
-    /* initialize state for loop */
-    huff = 0;                   /* starting code */
-    sym = 0;                    /* starting code symbol */
-    len = min;                  /* starting code length */
-    next = *table;              /* current table to fill in */
-    curr = root;                /* current table index bits */
-    drop = 0;                   /* current bits to drop from code for index */
-    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
-    used = 1U << root;          /* use root table entries */
-    mask = used - 1;            /* mask for comparing low */
-
-    /* check available table space */
-    if ((type == LENS && used > ENOUGH_LENS) ||
-        (type == DISTS && used > ENOUGH_DISTS))
-        return 1;
-
-    /* process all codes and make table entries */
-    for (;;) {
-        /* create table entry */
-        here.bits = (unsigned char)(len - drop);
-        if (work[sym] + 1U < match) {
-            here.op = (unsigned char)0;
-            here.val = work[sym];
-        }
-        else if (work[sym] >= match) {
-            here.op = (unsigned char)(extra[work[sym] - match]);
-            here.val = base[work[sym] - match];
-        }
-        else {
-            here.op = (unsigned char)(32 + 64);         /* end of block */
-            here.val = 0;
-        }
-
-        /* replicate for those indices with low len bits equal to huff */
-        incr = 1U << (len - drop);
-        fill = 1U << curr;
-        min = fill;                 /* save offset to next table */
-        do {
-            fill -= incr;
-            next[(huff >> drop) + fill] = here;
-        } while (fill != 0);
-
-        /* backwards increment the len-bit code huff */
-        incr = 1U << (len - 1);
-        while (huff & incr)
-            incr >>= 1;
-        if (incr != 0) {
-            huff &= incr - 1;
-            huff += incr;
-        }
-        else
-            huff = 0;
-
-        /* go to next symbol, update count, len */
-        sym++;
-        if (--(count[len]) == 0) {
-            if (len == max) break;
-            len = lens[work[sym]];
-        }
-
-        /* create new sub-table if needed */
-        if (len > root && (huff & mask) != low) {
-            /* if first time, transition to sub-tables */
-            if (drop == 0)
-                drop = root;
-
-            /* increment past last table */
-            next += min;            /* here min is 1 << curr */
-
-            /* determine length of next table */
-            curr = len - drop;
-            left = (int)(1 << curr);
-            while (curr + drop < max) {
-                left -= count[curr + drop];
-                if (left <= 0) break;
-                curr++;
-                left <<= 1;
-            }
-
-            /* check for enough space */
-            used += 1U << curr;
-            if ((type == LENS && used > ENOUGH_LENS) ||
-                (type == DISTS && used > ENOUGH_DISTS))
-                return 1;
-
-            /* point entry in root table to sub-table */
-            low = huff & mask;
-            (*table)[low].op = (unsigned char)curr;
-            (*table)[low].bits = (unsigned char)root;
-            (*table)[low].val = (unsigned short)(next - *table);
-        }
-    }
-
-    /* fill in remaining table entry if code is incomplete (guaranteed to have
-       at most one remaining entry, since if the code is incomplete, the
-       maximum code length that was allowed to get this far is one bit) */
-    if (huff != 0) {
-        here.op = (unsigned char)64;            /* invalid code marker */
-        here.bits = (unsigned char)(len - drop);
-        here.val = (unsigned short)0;
-        next[huff] = here;
-    }
-
-    /* set return parameters */
-    *table += used;
-    *bits = root;
-    return 0;
-}
diff --git a/Modules/zlib/inftrees.h b/Modules/zlib/inftrees.h
deleted file mode 100644
index baa53a0..0000000
--- a/Modules/zlib/inftrees.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Structure for decoding tables.  Each entry provides either the
-   information needed to do the operation requested by the code that
-   indexed that table entry, or it provides a pointer to another
-   table that indexes more bits of the code.  op indicates whether
-   the entry is a pointer to another table, a literal, a length or
-   distance, an end-of-block, or an invalid code.  For a table
-   pointer, the low four bits of op is the number of index bits of
-   that table.  For a length or distance, the low four bits of op
-   is the number of extra bits to get after the code.  bits is
-   the number of bits in this code or part of the code to drop off
-   of the bit buffer.  val is the actual byte to output in the case
-   of a literal, the base length or distance, or the offset from
-   the current table to the next table.  Each entry is four bytes. */
-typedef struct {
-    unsigned char op;           /* operation, extra bits, table bits */
-    unsigned char bits;         /* bits in this part of the code */
-    unsigned short val;         /* offset in table or code value */
-} code;
-
-/* op values as set by inflate_table():
-    00000000 - literal
-    0000tttt - table link, tttt != 0 is the number of table index bits
-    0001eeee - length or distance, eeee is the number of extra bits
-    01100000 - end of block
-    01000000 - invalid code
- */
-
-/* Maximum size of the dynamic table.  The maximum number of code structures is
-   1444, which is the sum of 852 for literal/length codes and 592 for distance
-   codes.  These values were found by exhaustive searches using the program
-   examples/enough.c found in the zlib distribtution.  The arguments to that
-   program are the number of symbols, the initial root table size, and the
-   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
-   returns returns 852, and "enough 30 6 15" for distance codes returns 592.
-   The initial root table size (9 or 6) is found in the fifth argument of the
-   inflate_table() calls in inflate.c and infback.c.  If the root table size is
-   changed, then these maximum sizes would be need to be recalculated and
-   updated. */
-#define ENOUGH_LENS 852
-#define ENOUGH_DISTS 592
-#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
-
-/* Type of code to build for inflate_table() */
-typedef enum {
-    CODES,
-    LENS,
-    DISTS
-} codetype;
-
-int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
-                             unsigned codes, code FAR * FAR *table,
-                             unsigned FAR *bits, unsigned short FAR *work));
diff --git a/Modules/zlib/make_vms.com b/Modules/zlib/make_vms.com
deleted file mode 100644
index 65e9d0c..0000000
--- a/Modules/zlib/make_vms.com
+++ /dev/null
@@ -1,867 +0,0 @@
-$! make libz under VMS written by
-$! Martin P.J. Zinser
-$!
-$! In case of problems with the install you might contact me at
-$! zinser@zinser.no-ip.info(preferred) or
-$! martin.zinser@eurexchange.com (work)
-$!
-$! Make procedure history for Zlib
-$!
-$!------------------------------------------------------------------------------
-$! Version history
-$! 0.01 20060120 First version to receive a number
-$! 0.02 20061008 Adapt to new Makefile.in
-$! 0.03 20091224 Add support for large file check
-$! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite
-$! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in
-$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples
-$!               subdir path, update module search in makefile.in
-$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned
-$!               shared image creation
-$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared
-$!               image
-$! 0.09 20120305 SMS.  P1 sets builder ("MMK", "MMS", " " (built-in)).
-$!               "" -> automatic, preference: MMK, MMS, built-in.
-$!
-$ on error then goto err_exit
-$!
-$ true  = 1
-$ false = 0
-$ tmpnam = "temp_" + f$getjpi("","pid")
-$ tt = tmpnam + ".txt"
-$ tc = tmpnam + ".c"
-$ th = tmpnam + ".h"
-$ define/nolog tconfig 'th'
-$ its_decc = false
-$ its_vaxc = false
-$ its_gnuc = false
-$ s_case   = False
-$!
-$! Setup variables holding "config" information
-$!
-$ Make    = "''p1'"
-$ name     = "Zlib"
-$ version  = "?.?.?"
-$ v_string = "ZLIB_VERSION"
-$ v_file   = "zlib.h"
-$ ccopt   = "/include = []"
-$ lopts   = ""
-$ dnsrl   = ""
-$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in"
-$ conf_check_string = ""
-$ linkonly = false
-$ optfile  = name + ".opt"
-$ mapfile  = name + ".map"
-$ libdefs  = ""
-$ vax      = f$getsyi("HW_MODEL").lt.1024
-$ axp      = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096
-$ ia64     = f$getsyi("HW_MODEL").ge.4096
-$!
-$! 2012-03-05 SMS.
-$! Why is this needed?  And if it is needed, why not simply ".not. vax"?
-$!
-$!!! if axp .or. ia64 then  set proc/parse=extended
-$!
-$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL")
-$ mydef  = F$parse(whoami,,,"DEVICE")
-$ mydir  = f$parse(whoami,,,"DIRECTORY") - "]["
-$ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type")
-$!
-$! Check for MMK/MMS
-$!
-$ if (Make .eqs. "")
-$ then
-$   If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
-$   If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
-$ else
-$   Make = f$edit( Make, "trim")
-$ endif
-$!
-$ gosub find_version
-$!
-$  open/write topt tmp.opt
-$  open/write optf 'optfile'
-$!
-$ gosub check_opts
-$!
-$! Look for the compiler used
-$!
-$ gosub check_compiler
-$ close topt
-$ close optf
-$!
-$ if its_decc
-$ then
-$   ccopt = "/prefix=all" + ccopt
-$   if f$trnlnm("SYS") .eqs. ""
-$   then
-$     if axp
-$     then
-$       define sys sys$library:
-$     else
-$       ccopt = "/decc" + ccopt
-$       define sys decc$library_include:
-$     endif
-$   endif
-$!
-$! 2012-03-05 SMS.
-$! Why /NAMES = AS_IS?  Why not simply ".not. vax"?  And why not on VAX?
-$!
-$   if axp .or. ia64
-$   then
-$       ccopt = ccopt + "/name=as_is/opt=(inline=speed)"
-$       s_case = true
-$   endif
-$ endif
-$ if its_vaxc .or. its_gnuc
-$ then
-$    if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$ endif
-$!
-$! Build a fake configure input header
-$!
-$ open/write conf_hin config.hin
-$ write conf_hin "#undef _LARGEFILE64_SOURCE"
-$ close conf_hin
-$!
-$!
-$ i = 0
-$FIND_ACONF:
-$ fname = f$element(i,"#",aconf_in_file)
-$ if fname .eqs. "#" then goto AMISS_ERR
-$ if f$search(fname) .eqs. ""
-$ then
-$   i = i + 1
-$   goto find_aconf
-$ endif
-$ open/read/err=aconf_err aconf_in 'fname'
-$ open/write aconf zconf.h
-$ACONF_LOOP:
-$ read/end_of_file=aconf_exit aconf_in line
-$ work = f$edit(line, "compress,trim")
-$ if f$extract(0,6,work) .nes. "#undef"
-$ then
-$   if f$extract(0,12,work) .nes. "#cmakedefine"
-$   then
-$       write aconf line
-$   endif
-$ else
-$   cdef = f$element(1," ",work)
-$   gosub check_config
-$ endif
-$ goto aconf_loop
-$ACONF_EXIT:
-$ write aconf ""
-$ write aconf "/* VMS specifics added by make_vms.com: */"
-$ write aconf "#define VMS 1"
-$ write aconf "#include <unistd.h>"
-$ write aconf "#include <unixio.h>"
-$ write aconf "#ifdef _LARGEFILE"
-$ write aconf "# define off64_t __off64_t"
-$ write aconf "# define fopen64 fopen"
-$ write aconf "# define fseeko64 fseeko"
-$ write aconf "# define lseek64 lseek"
-$ write aconf "# define ftello64 ftell"
-$ write aconf "#endif"
-$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)"
-$ write aconf "# define HAVE_VSNPRINTF"
-$ write aconf "#endif"
-$ close aconf_in
-$ close aconf
-$ if f$search("''th'") .nes. "" then delete 'th';*
-$! Build the thing plain or with mms
-$!
-$ write sys$output "Compiling Zlib sources ..."
-$ if make.eqs.""
-$ then
-$   if (f$search( "example.obj;*") .nes. "") then delete example.obj;*
-$   if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;*
-$   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
-                adler32.c zlib.h zconf.h
-$   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
-                compress.c zlib.h zconf.h
-$   CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
-                crc32.c zlib.h zconf.h
-$   CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
-                deflate.c deflate.h zutil.h zlib.h zconf.h
-$   CALL MAKE gzclose.OBJ "CC ''CCOPT' gzclose" -
-                gzclose.c zutil.h zlib.h zconf.h
-$   CALL MAKE gzlib.OBJ "CC ''CCOPT' gzlib" -
-                gzlib.c zutil.h zlib.h zconf.h
-$   CALL MAKE gzread.OBJ "CC ''CCOPT' gzread" -
-                gzread.c zutil.h zlib.h zconf.h
-$   CALL MAKE gzwrite.OBJ "CC ''CCOPT' gzwrite" -
-                gzwrite.c zutil.h zlib.h zconf.h
-$   CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
-                infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
-$   CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
-                inffast.c zutil.h zlib.h zconf.h inffast.h
-$   CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
-                inflate.c zutil.h zlib.h zconf.h infblock.h
-$   CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
-                inftrees.c zutil.h zlib.h zconf.h inftrees.h
-$   CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
-                trees.c deflate.h zutil.h zlib.h zconf.h
-$   CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
-                uncompr.c zlib.h zconf.h
-$   CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
-                zutil.c zutil.h zlib.h zconf.h
-$   write sys$output "Building Zlib ..."
-$   CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
-$   write sys$output "Building example..."
-$   CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" -
-                [.test]example.c zlib.h zconf.h
-$   call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$   write sys$output "Building minigzip..."
-$   CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" -
-              [.test]minigzip.c zlib.h zconf.h
-$   call make minigzip.exe -
-              "LINK minigzip,libz.olb/lib" -
-              minigzip.obj libz.olb
-$ else
-$   gosub crea_mms
-$   write sys$output "Make ''name' ''version' with ''Make' "
-$   'make'
-$ endif
-$!
-$! Create shareable image
-$!
-$ gosub crea_olist
-$ write sys$output "Creating libzshr.exe"
-$ call map_2_shopt 'mapfile' 'optfile'
-$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt
-$ write sys$output "Zlib build completed"
-$ delete/nolog tmp.opt;*
-$ exit
-$AMISS_ERR:
-$ write sys$output "No source for config.hin found."
-$ write sys$output "Tried any of ''aconf_in_file'"
-$ goto err_exit
-$CC_ERR:
-$ write sys$output "C compiler required to build ''name'"
-$ goto err_exit
-$ERR_EXIT:
-$ set message/facil/ident/sever/text
-$ close/nolog optf
-$ close/nolog topt
-$ close/nolog aconf_in
-$ close/nolog aconf
-$ close/nolog out
-$ close/nolog min
-$ close/nolog mod
-$ close/nolog h_in
-$ write sys$output "Exiting..."
-$ exit 2
-$!
-$!
-$MAKE: SUBROUTINE   !SUBROUTINE TO CHECK DEPENDENCIES
-$ V = 'F$Verify(0)
-$! P1 = What we are trying to make
-$! P2 = Command to make it
-$! P3 - P8  What it depends on
-$
-$ If F$Search(P1) .Eqs. "" Then Goto Makeit
-$ Time = F$CvTime(F$File(P1,"RDT"))
-$arg=3
-$Loop:
-$       Argument = P'arg
-$       If Argument .Eqs. "" Then Goto Exit
-$       El=0
-$Loop2:
-$       File = F$Element(El," ",Argument)
-$       If File .Eqs. " " Then Goto Endl
-$       AFile = ""
-$Loop3:
-$       OFile = AFile
-$       AFile = F$Search(File)
-$       If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
-$       If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
-$       Goto Loop3
-$NextEL:
-$       El = El + 1
-$       Goto Loop2
-$EndL:
-$ arg=arg+1
-$ If arg .Le. 8 Then Goto Loop
-$ Goto Exit
-$
-$Makeit:
-$ VV=F$VERIFY(0)
-$ write sys$output P2
-$ 'P2
-$ VV='F$Verify(VV)
-$Exit:
-$ If V Then Set Verify
-$ENDSUBROUTINE
-$!------------------------------------------------------------------------------
-$!
-$! Check command line options and set symbols accordingly
-$!
-$!------------------------------------------------------------------------------
-$! Version history
-$! 0.01 20041206 First version to receive a number
-$! 0.02 20060126 Add new "HELP" target
-$ CHECK_OPTS:
-$ i = 1
-$ OPT_LOOP:
-$ if i .lt. 9
-$ then
-$   cparm = f$edit(p'i',"upcase")
-$!
-$! Check if parameter actually contains something
-$!
-$   if f$edit(cparm,"trim") .nes. ""
-$   then
-$     if cparm .eqs. "DEBUG"
-$     then
-$       ccopt = ccopt + "/noopt/deb"
-$       lopts = lopts + "/deb"
-$     endif
-$     if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
-$     then
-$       start = f$locate("=",cparm) + 1
-$       len   = f$length(cparm) - start
-$       ccopt = ccopt + f$extract(start,len,cparm)
-$       if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
-          then s_case = true
-$     endif
-$     if cparm .eqs. "LINK" then linkonly = true
-$     if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
-$     then
-$       start = f$locate("=",cparm) + 1
-$       len   = f$length(cparm) - start
-$       lopts = lopts + f$extract(start,len,cparm)
-$     endif
-$     if f$locate("CC=",cparm) .lt. f$length(cparm)
-$     then
-$       start  = f$locate("=",cparm) + 1
-$       len    = f$length(cparm) - start
-$       cc_com = f$extract(start,len,cparm)
-        if (cc_com .nes. "DECC") .and. -
-           (cc_com .nes. "VAXC") .and. -
-           (cc_com .nes. "GNUC")
-$       then
-$         write sys$output "Unsupported compiler choice ''cc_com' ignored"
-$         write sys$output "Use DECC, VAXC, or GNUC instead"
-$       else
-$         if cc_com .eqs. "DECC" then its_decc = true
-$         if cc_com .eqs. "VAXC" then its_vaxc = true
-$         if cc_com .eqs. "GNUC" then its_gnuc = true
-$       endif
-$     endif
-$     if f$locate("MAKE=",cparm) .lt. f$length(cparm)
-$     then
-$       start  = f$locate("=",cparm) + 1
-$       len    = f$length(cparm) - start
-$       mmks = f$extract(start,len,cparm)
-$       if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
-$       then
-$         make = mmks
-$       else
-$         write sys$output "Unsupported make choice ''mmks' ignored"
-$         write sys$output "Use MMK or MMS instead"
-$       endif
-$     endif
-$     if cparm .eqs. "HELP" then gosub bhelp
-$   endif
-$   i = i + 1
-$   goto opt_loop
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Look for the compiler used
-$!
-$! Version history
-$! 0.01 20040223 First version to receive a number
-$! 0.02 20040229 Save/set value of decc$no_rooted_search_lists
-$! 0.03 20060202 Extend handling of GNU C
-$! 0.04 20090402 Compaq -> hp
-$CHECK_COMPILER:
-$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
-$ then
-$   its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
-$   its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "")
-$   its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "")
-$ endif
-$!
-$! Exit if no compiler available
-$!
-$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
-$ then goto CC_ERR
-$ else
-$   if its_decc
-$   then
-$     write sys$output "CC compiler check ... hp C"
-$     if f$trnlnm("decc$no_rooted_search_lists") .nes. ""
-$     then
-$       dnrsl = f$trnlnm("decc$no_rooted_search_lists")
-$     endif
-$     define/nolog decc$no_rooted_search_lists 1
-$   else
-$     if its_vaxc then write sys$output "CC compiler check ... VAX C"
-$     if its_gnuc
-$     then
-$         write sys$output "CC compiler check ... GNU C"
-$         if f$trnlnm(topt) then write topt "gnu_cc:[000000]gcclib.olb/lib"
-$         if f$trnlnm(optf) then write optf "gnu_cc:[000000]gcclib.olb/lib"
-$         cc = "gcc"
-$     endif
-$     if f$trnlnm(topt) then write topt "sys$share:vaxcrtl.exe/share"
-$     if f$trnlnm(optf) then write optf "sys$share:vaxcrtl.exe/share"
-$   endif
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! If MMS/MMK are available dump out the descrip.mms if required
-$!
-$CREA_MMS:
-$ write sys$output "Creating descrip.mms..."
-$ create descrip.mms
-$ open/append out descrip.mms
-$ copy sys$input: out
-$ deck
-# descrip.mms: MMS description file for building zlib on VMS
-# written by Martin P.J. Zinser
-# <zinser@zinser.no-ip.info or martin.zinser@eurexchange.com>
-
-OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\
-       gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\
-       deflate.obj, trees.obj, zutil.obj, inflate.obj, \
-       inftrees.obj, inffast.obj
-
-$ eod
-$ write out "CFLAGS=", ccopt
-$ write out "LOPTS=", lopts
-$ write out "all : example.exe minigzip.exe libz.olb"
-$ copy sys$input: out
-$ deck
-        @ write sys$output " Example applications available"
-
-libz.olb : libz.olb($(OBJS))
-	@ write sys$output " libz available"
-
-example.exe : example.obj libz.olb
-              link $(LOPTS) example,libz.olb/lib
-
-minigzip.exe : minigzip.obj libz.olb
-              link $(LOPTS) minigzip,libz.olb/lib
-
-clean :
-	delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
-
-
-# Other dependencies.
-adler32.obj  : adler32.c zutil.h zlib.h zconf.h
-compress.obj : compress.c zlib.h zconf.h
-crc32.obj    : crc32.c zutil.h zlib.h zconf.h
-deflate.obj  : deflate.c deflate.h zutil.h zlib.h zconf.h
-example.obj  : [.test]example.c zlib.h zconf.h
-gzclose.obj  : gzclose.c zutil.h zlib.h zconf.h
-gzlib.obj    : gzlib.c zutil.h zlib.h zconf.h
-gzread.obj   : gzread.c zutil.h zlib.h zconf.h
-gzwrite.obj  : gzwrite.c zutil.h zlib.h zconf.h
-inffast.obj  : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
-inflate.obj  : inflate.c zutil.h zlib.h zconf.h
-inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
-minigzip.obj : [.test]minigzip.c zlib.h zconf.h
-trees.obj    : trees.c deflate.h zutil.h zlib.h zconf.h
-uncompr.obj  : uncompr.c zlib.h zconf.h
-zutil.obj    : zutil.c zutil.h zlib.h zconf.h
-infback.obj  : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
-$ eod
-$ close out
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Read list of core library sources from makefile.in and create options
-$! needed to build shareable image
-$!
-$CREA_OLIST:
-$ open/read min makefile.in
-$ open/write mod modules.opt
-$ src_check_list = "OBJZ =#OBJG ="
-$MRLOOP:
-$ read/end=mrdone min rec
-$ i = 0
-$SRC_CHECK_LOOP:
-$ src_check = f$element(i, "#", src_check_list)
-$ i = i+1
-$ if src_check .eqs. "#" then goto mrloop
-$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop
-$ rec = rec - src_check
-$ gosub extra_filnam
-$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop
-$MRSLOOP:
-$ read/end=mrdone min rec
-$ gosub extra_filnam
-$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop
-$MRDONE:
-$ close min
-$ close mod
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Take record extracted in crea_olist and split it into single filenames
-$!
-$EXTRA_FILNAM:
-$ myrec = f$edit(rec - "\", "trim,compress")
-$ i = 0
-$FELOOP:
-$ srcfil = f$element(i," ", myrec)
-$ if (srcfil .nes. " ")
-$ then
-$   write mod f$parse(srcfil,,,"NAME"), ".obj"
-$   i = i + 1
-$   goto feloop
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Find current Zlib version number
-$!
-$FIND_VERSION:
-$ open/read h_in 'v_file'
-$hloop:
-$ read/end=hdone h_in rec
-$ rec = f$edit(rec,"TRIM")
-$ if (f$extract(0,1,rec) .nes. "#") then goto hloop
-$ rec = f$edit(rec - "#", "TRIM")
-$ if f$element(0," ",rec) .nes. "define" then goto hloop
-$ if f$element(1," ",rec) .eqs. v_string
-$ then
-$   version = 'f$element(2," ",rec)'
-$   goto hdone
-$ endif
-$ goto hloop
-$hdone:
-$ close h_in
-$ return
-$!------------------------------------------------------------------------------
-$!
-$CHECK_CONFIG:
-$!
-$ in_ldef = f$locate(cdef,libdefs)
-$ if (in_ldef .lt. f$length(libdefs))
-$ then
-$   write aconf "#define ''cdef' 1"
-$   libdefs = f$extract(0,in_ldef,libdefs) + -
-              f$extract(in_ldef + f$length(cdef) + 1, -
-                        f$length(libdefs) - in_ldef - f$length(cdef) - 1, -
-                        libdefs)
-$ else
-$   if (f$type('cdef') .eqs. "INTEGER")
-$   then
-$     write aconf "#define ''cdef' ", 'cdef'
-$   else
-$     if (f$type('cdef') .eqs. "STRING")
-$     then
-$       write aconf "#define ''cdef' ", """", '''cdef'', """"
-$     else
-$       gosub check_cc_def
-$     endif
-$   endif
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Check if this is a define relating to the properties of the C/C++
-$! compiler
-$!
-$ CHECK_CC_DEF:
-$ if (cdef .eqs. "_LARGEFILE64_SOURCE")
-$ then
-$   copy sys$input: 'tc'
-$   deck
-#include "tconfig"
-#define _LARGEFILE
-#include <stdio.h>
-
-int main(){
-FILE *fp;
-  fp = fopen("temp.txt","r");
-  fseeko(fp,1,SEEK_SET);
-  fclose(fp);
-}
-
-$   eod
-$   test_inv = false
-$   comm_h = false
-$   gosub cc_prop_check
-$   return
-$ endif
-$ write aconf "/* ", line, " */"
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Check for properties of C/C++ compiler
-$!
-$! Version history
-$! 0.01 20031020 First version to receive a number
-$! 0.02 20031022 Added logic for defines with value
-$! 0.03 20040309 Make sure local config file gets not deleted
-$! 0.04 20041230 Also write include for configure run
-$! 0.05 20050103 Add processing of "comment defines"
-$CC_PROP_CHECK:
-$ cc_prop = true
-$ is_need = false
-$ is_need = (f$extract(0,4,cdef) .eqs. "NEED") .or. (test_inv .eq. true)
-$ if f$search(th) .eqs. "" then create 'th'
-$ set message/nofac/noident/nosever/notext
-$ on error then continue
-$ cc 'tmpnam'
-$ if .not. ($status)  then cc_prop = false
-$ on error then continue
-$! The headers might lie about the capabilities of the RTL
-$ link 'tmpnam',tmp.opt/opt
-$ if .not. ($status)  then cc_prop = false
-$ set message/fac/ident/sever/text
-$ on error then goto err_exit
-$ delete/nolog 'tmpnam'.*;*/exclude='th'
-$ if (cc_prop .and. .not. is_need) .or. -
-     (.not. cc_prop .and. is_need)
-$ then
-$   write sys$output "Checking for ''cdef'... yes"
-$   if f$type('cdef_val'_yes) .nes. ""
-$   then
-$     if f$type('cdef_val'_yes) .eqs. "INTEGER" -
-         then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_yes)
-$     if f$type('cdef_val'_yes) .eqs. "STRING" -
-         then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_yes)
-$   else
-$     call write_config f$fao("#define !AS 1",cdef)
-$   endif
-$   if (cdef .eqs. "HAVE_FSEEKO") .or. (cdef .eqs. "_LARGE_FILES") .or. -
-       (cdef .eqs. "_LARGEFILE64_SOURCE") then -
-      call write_config f$string("#define _LARGEFILE 1")
-$ else
-$   write sys$output "Checking for ''cdef'... no"
-$   if (comm_h)
-$   then
-      call write_config f$fao("/* !AS */",line)
-$   else
-$     if f$type('cdef_val'_no) .nes. ""
-$     then
-$       if f$type('cdef_val'_no) .eqs. "INTEGER" -
-           then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_no)
-$       if f$type('cdef_val'_no) .eqs. "STRING" -
-           then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_no)
-$     else
-$       call write_config f$fao("#undef !AS",cdef)
-$     endif
-$   endif
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Check for properties of C/C++ compiler with multiple result values
-$!
-$! Version history
-$! 0.01 20040127 First version
-$! 0.02 20050103 Reconcile changes from cc_prop up to version 0.05
-$CC_MPROP_CHECK:
-$ cc_prop = true
-$ i    = 1
-$ idel = 1
-$ MT_LOOP:
-$ if f$type(result_'i') .eqs. "STRING"
-$ then
-$   set message/nofac/noident/nosever/notext
-$   on error then continue
-$   cc 'tmpnam'_'i'
-$   if .not. ($status)  then cc_prop = false
-$   on error then continue
-$! The headers might lie about the capabilities of the RTL
-$   link 'tmpnam'_'i',tmp.opt/opt
-$   if .not. ($status)  then cc_prop = false
-$   set message/fac/ident/sever/text
-$   on error then goto err_exit
-$   delete/nolog 'tmpnam'_'i'.*;*
-$   if (cc_prop)
-$   then
-$     write sys$output "Checking for ''cdef'... ", mdef_'i'
-$     if f$type(mdef_'i') .eqs. "INTEGER" -
-         then call write_config f$fao("#define !AS !UL",cdef,mdef_'i')
-$     if f$type('cdef_val'_yes) .eqs. "STRING" -
-         then call write_config f$fao("#define !AS !AS",cdef,mdef_'i')
-$     goto msym_clean
-$   else
-$     i = i + 1
-$     goto mt_loop
-$   endif
-$ endif
-$ write sys$output "Checking for ''cdef'... no"
-$ call write_config f$fao("#undef !AS",cdef)
-$ MSYM_CLEAN:
-$ if (idel .le. msym_max)
-$ then
-$   delete/sym mdef_'idel'
-$   idel = idel + 1
-$   goto msym_clean
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Write configuration to both permanent and temporary config file
-$!
-$! Version history
-$! 0.01 20031029 First version to receive a number
-$!
-$WRITE_CONFIG: SUBROUTINE
-$  write aconf 'p1'
-$  open/append confh 'th'
-$  write confh 'p1'
-$  close confh
-$ENDSUBROUTINE
-$!------------------------------------------------------------------------------
-$!
-$! Analyze the project map file and create the symbol vector for a shareable
-$! image from it
-$!
-$! Version history
-$! 0.01 20120128 First version
-$! 0.02 20120226 Add pre-load logic
-$!
-$ MAP_2_SHOPT: Subroutine
-$!
-$ SAY := "WRITE_ SYS$OUTPUT"
-$!
-$ IF F$SEARCH("''P1'") .EQS. ""
-$ THEN
-$    SAY "MAP_2_SHOPT-E-NOSUCHFILE:  Error, inputfile ''p1' not available"
-$    goto exit_m2s
-$ ENDIF
-$ IF "''P2'" .EQS. ""
-$ THEN
-$    SAY "MAP_2_SHOPT:  Error, no output file provided"
-$    goto exit_m2s
-$ ENDIF
-$!
-$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary"
-$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread"
-$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary"
-$ module4 = "inflateSync#uncompress#zlibVersion#compress"
-$ open/read map 'p1
-$ if axp .or. ia64
-$ then
-$     open/write aopt a.opt
-$     open/write bopt b.opt
-$     write aopt " CASE_SENSITIVE=YES"
-$     write bopt "SYMBOL_VECTOR= (-"
-$     mod_sym_num = 1
-$ MOD_SYM_LOOP:
-$     if f$type(module'mod_sym_num') .nes. ""
-$     then
-$         mod_in = 0
-$ MOD_SYM_IN:
-$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
-$         if shared_proc .nes. "#"
-$         then
-$             write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
-        		       f$edit(shared_proc,"upcase"),shared_proc)
-$             write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
-$             mod_in = mod_in + 1
-$             goto mod_sym_in
-$         endif
-$         mod_sym_num = mod_sym_num + 1
-$         goto mod_sym_loop
-$     endif
-$MAP_LOOP:
-$     read/end=map_end map line
-$     if (f$locate("{",line).lt. f$length(line)) .or. -
-         (f$locate("global:", line) .lt. f$length(line))
-$     then
-$         proc = true
-$         goto map_loop
-$     endif
-$     if f$locate("}",line).lt. f$length(line) then proc = false
-$     if f$locate("local:", line) .lt. f$length(line) then proc = false
-$     if proc
-$     then
-$         shared_proc = f$edit(line,"collapse")
-$         chop_semi = f$locate(";", shared_proc)
-$         if chop_semi .lt. f$length(shared_proc) then -
-              shared_proc = f$extract(0, chop_semi, shared_proc)
-$         write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
-        			 f$edit(shared_proc,"upcase"),shared_proc)
-$         write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
-$     endif
-$     goto map_loop
-$MAP_END:
-$     close/nolog aopt
-$     close/nolog bopt
-$     open/append libopt 'p2'
-$     open/read aopt a.opt
-$     open/read bopt b.opt
-$ALOOP:
-$     read/end=aloop_end aopt line
-$     write libopt line
-$     goto aloop
-$ALOOP_END:
-$     close/nolog aopt
-$     sv = ""
-$BLOOP:
-$     read/end=bloop_end bopt svn
-$     if (svn.nes."")
-$     then
-$        if (sv.nes."") then write libopt sv
-$        sv = svn
-$     endif
-$     goto bloop
-$BLOOP_END:
-$     write libopt f$extract(0,f$length(sv)-2,sv), "-"
-$     write libopt ")"
-$     close/nolog bopt
-$     delete/nolog/noconf a.opt;*,b.opt;*
-$ else
-$     if vax
-$     then
-$     open/append libopt 'p2'
-$     mod_sym_num = 1
-$ VMOD_SYM_LOOP:
-$     if f$type(module'mod_sym_num') .nes. ""
-$     then
-$         mod_in = 0
-$ VMOD_SYM_IN:
-$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
-$         if shared_proc .nes. "#"
-$         then
-$     	      write libopt f$fao("UNIVERSAL=!AS",-
-      	  			     f$edit(shared_proc,"upcase"))
-$             mod_in = mod_in + 1
-$             goto vmod_sym_in
-$         endif
-$         mod_sym_num = mod_sym_num + 1
-$         goto vmod_sym_loop
-$     endif
-$VMAP_LOOP:
-$     	  read/end=vmap_end map line
-$     	  if (f$locate("{",line).lt. f$length(line)) .or. -
-   	      (f$locate("global:", line) .lt. f$length(line))
-$     	  then
-$     	      proc = true
-$     	      goto vmap_loop
-$     	  endif
-$     	  if f$locate("}",line).lt. f$length(line) then proc = false
-$     	  if f$locate("local:", line) .lt. f$length(line) then proc = false
-$     	  if proc
-$     	  then
-$     	      shared_proc = f$edit(line,"collapse")
-$     	      chop_semi = f$locate(";", shared_proc)
-$     	      if chop_semi .lt. f$length(shared_proc) then -
-      	  	  shared_proc = f$extract(0, chop_semi, shared_proc)
-$     	      write libopt f$fao("UNIVERSAL=!AS",-
-      	  			     f$edit(shared_proc,"upcase"))
-$     	  endif
-$     	  goto vmap_loop
-$VMAP_END:
-$     else
-$         write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)"
-$         write sys$output "No options file created"
-$     endif
-$ endif
-$ EXIT_M2S:
-$ close/nolog map
-$ close/nolog libopt
-$ endsubroutine
diff --git a/Modules/zlib/minigzip.c b/Modules/zlib/minigzip.c
deleted file mode 100644
index b3025a4..0000000
--- a/Modules/zlib/minigzip.c
+++ /dev/null
@@ -1,651 +0,0 @@
-/* minigzip.c -- simulate gzip using the zlib compression library
- * Copyright (C) 1995-2006, 2010, 2011 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * minigzip is a minimal implementation of the gzip utility. This is
- * only an example of using zlib and isn't meant to replace the
- * full-featured gzip. No attempt is made to deal with file systems
- * limiting names to 14 or 8+3 characters, etc... Error checking is
- * very limited. So use minigzip only for testing; use gzip for the
- * real thing. On MSDOS, use only on file names without extension
- * or in pipe mode.
- */
-
-/* @(#) $Id$ */
-
-#include "zlib.h"
-#include <stdio.h>
-
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-
-#ifdef USE_MMAP
-#  include <sys/types.h>
-#  include <sys/mman.h>
-#  include <sys/stat.h>
-#endif
-
-#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
-#  include <fcntl.h>
-#  include <io.h>
-#  ifdef UNDER_CE
-#    include <stdlib.h>
-#  endif
-#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
-#else
-#  define SET_BINARY_MODE(file)
-#endif
-
-#ifdef _MSC_VER
-#  define snprintf _snprintf
-#endif
-
-#ifdef VMS
-#  define unlink delete
-#  define GZ_SUFFIX "-gz"
-#endif
-#ifdef RISCOS
-#  define unlink remove
-#  define GZ_SUFFIX "-gz"
-#  define fileno(file) file->__file
-#endif
-#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-#  include <unix.h> /* for fileno */
-#endif
-
-#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE)
-#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
-  extern int unlink OF((const char *));
-#endif
-#endif
-
-#if defined(UNDER_CE)
-#  include <windows.h>
-#  define perror(s) pwinerror(s)
-
-/* Map the Windows error number in ERROR to a locale-dependent error
-   message string and return a pointer to it.  Typically, the values
-   for ERROR come from GetLastError.
-
-   The string pointed to shall not be modified by the application,
-   but may be overwritten by a subsequent call to strwinerror
-
-   The strwinerror function does not change the current setting
-   of GetLastError.  */
-
-static char *strwinerror (error)
-     DWORD error;
-{
-    static char buf[1024];
-
-    wchar_t *msgbuf;
-    DWORD lasterr = GetLastError();
-    DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
-        | FORMAT_MESSAGE_ALLOCATE_BUFFER,
-        NULL,
-        error,
-        0, /* Default language */
-        (LPVOID)&msgbuf,
-        0,
-        NULL);
-    if (chars != 0) {
-        /* If there is an \r\n appended, zap it.  */
-        if (chars >= 2
-            && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
-            chars -= 2;
-            msgbuf[chars] = 0;
-        }
-
-        if (chars > sizeof (buf) - 1) {
-            chars = sizeof (buf) - 1;
-            msgbuf[chars] = 0;
-        }
-
-        wcstombs(buf, msgbuf, chars + 1);
-        LocalFree(msgbuf);
-    }
-    else {
-        sprintf(buf, "unknown win32 error (%ld)", error);
-    }
-
-    SetLastError(lasterr);
-    return buf;
-}
-
-static void pwinerror (s)
-    const char *s;
-{
-    if (s && *s)
-        fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ()));
-    else
-        fprintf(stderr, "%s\n", strwinerror(GetLastError ()));
-}
-
-#endif /* UNDER_CE */
-
-#ifndef GZ_SUFFIX
-#  define GZ_SUFFIX ".gz"
-#endif
-#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
-
-#define BUFLEN      16384
-#define MAX_NAME_LEN 1024
-
-#ifdef MAXSEG_64K
-#  define local static
-   /* Needed for systems with limitation on stack size. */
-#else
-#  define local
-#endif
-
-#ifdef Z_SOLO
-/* for Z_SOLO, create simplified gz* functions using deflate and inflate */
-
-#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
-#  include <unistd.h>       /* for unlink() */
-#endif
-
-void *myalloc OF((void *, unsigned, unsigned));
-void myfree OF((void *, void *));
-
-void *myalloc(q, n, m)
-    void *q;
-    unsigned n, m;
-{
-    q = Z_NULL;
-    return calloc(n, m);
-}
-
-void myfree(q, p)
-    void *q, *p;
-{
-    q = Z_NULL;
-    free(p);
-}
-
-typedef struct gzFile_s {
-    FILE *file;
-    int write;
-    int err;
-    char *msg;
-    z_stream strm;
-} *gzFile;
-
-gzFile gzopen OF((const char *, const char *));
-gzFile gzdopen OF((int, const char *));
-gzFile gz_open OF((const char *, int, const char *));
-
-gzFile gzopen(path, mode)
-const char *path;
-const char *mode;
-{
-    return gz_open(path, -1, mode);
-}
-
-gzFile gzdopen(fd, mode)
-int fd;
-const char *mode;
-{
-    return gz_open(NULL, fd, mode);
-}
-
-gzFile gz_open(path, fd, mode)
-    const char *path;
-    int fd;
-    const char *mode;
-{
-    gzFile gz;
-    int ret;
-
-    gz = malloc(sizeof(struct gzFile_s));
-    if (gz == NULL)
-        return NULL;
-    gz->write = strchr(mode, 'w') != NULL;
-    gz->strm.zalloc = myalloc;
-    gz->strm.zfree = myfree;
-    gz->strm.opaque = Z_NULL;
-    if (gz->write)
-        ret = deflateInit2(&(gz->strm), -1, 8, 15 + 16, 8, 0);
-    else {
-        gz->strm.next_in = 0;
-        gz->strm.avail_in = Z_NULL;
-        ret = inflateInit2(&(gz->strm), 15 + 16);
-    }
-    if (ret != Z_OK) {
-        free(gz);
-        return NULL;
-    }
-    gz->file = path == NULL ? fdopen(fd, gz->write ? "wb" : "rb") :
-                              fopen(path, gz->write ? "wb" : "rb");
-    if (gz->file == NULL) {
-        gz->write ? deflateEnd(&(gz->strm)) : inflateEnd(&(gz->strm));
-        free(gz);
-        return NULL;
-    }
-    gz->err = 0;
-    gz->msg = "";
-    return gz;
-}
-
-int gzwrite OF((gzFile, const void *, unsigned));
-
-int gzwrite(gz, buf, len)
-    gzFile gz;
-    const void *buf;
-    unsigned len;
-{
-    z_stream *strm;
-    unsigned char out[BUFLEN];
-
-    if (gz == NULL || !gz->write)
-        return 0;
-    strm = &(gz->strm);
-    strm->next_in = (void *)buf;
-    strm->avail_in = len;
-    do {
-        strm->next_out = out;
-        strm->avail_out = BUFLEN;
-        (void)deflate(strm, Z_NO_FLUSH);
-        fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
-    } while (strm->avail_out == 0);
-    return len;
-}
-
-int gzread OF((gzFile, void *, unsigned));
-
-int gzread(gz, buf, len)
-    gzFile gz;
-    void *buf;
-    unsigned len;
-{
-    int ret;
-    unsigned got;
-    unsigned char in[1];
-    z_stream *strm;
-
-    if (gz == NULL || gz->write)
-        return 0;
-    if (gz->err)
-        return 0;
-    strm = &(gz->strm);
-    strm->next_out = (void *)buf;
-    strm->avail_out = len;
-    do {
-        got = fread(in, 1, 1, gz->file);
-        if (got == 0)
-            break;
-        strm->next_in = in;
-        strm->avail_in = 1;
-        ret = inflate(strm, Z_NO_FLUSH);
-        if (ret == Z_DATA_ERROR) {
-            gz->err = Z_DATA_ERROR;
-            gz->msg = strm->msg;
-            return 0;
-        }
-        if (ret == Z_STREAM_END)
-            inflateReset(strm);
-    } while (strm->avail_out);
-    return len - strm->avail_out;
-}
-
-int gzclose OF((gzFile));
-
-int gzclose(gz)
-    gzFile gz;
-{
-    z_stream *strm;
-    unsigned char out[BUFLEN];
-
-    if (gz == NULL)
-        return Z_STREAM_ERROR;
-    strm = &(gz->strm);
-    if (gz->write) {
-        strm->next_in = Z_NULL;
-        strm->avail_in = 0;
-        do {
-            strm->next_out = out;
-            strm->avail_out = BUFLEN;
-            (void)deflate(strm, Z_FINISH);
-            fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
-        } while (strm->avail_out == 0);
-        deflateEnd(strm);
-    }
-    else
-        inflateEnd(strm);
-    fclose(gz->file);
-    free(gz);
-    return Z_OK;
-}
-
-const char *gzerror OF((gzFile, int *));
-
-const char *gzerror(gz, err)
-    gzFile gz;
-    int *err;
-{
-    *err = gz->err;
-    return gz->msg;
-}
-
-#endif
-
-char *prog;
-
-void error            OF((const char *msg));
-void gz_compress      OF((FILE   *in, gzFile out));
-#ifdef USE_MMAP
-int  gz_compress_mmap OF((FILE   *in, gzFile out));
-#endif
-void gz_uncompress    OF((gzFile in, FILE   *out));
-void file_compress    OF((char  *file, char *mode));
-void file_uncompress  OF((char  *file));
-int  main             OF((int argc, char *argv[]));
-
-/* ===========================================================================
- * Display error message and exit
- */
-void error(msg)
-    const char *msg;
-{
-    fprintf(stderr, "%s: %s\n", prog, msg);
-    exit(1);
-}
-
-/* ===========================================================================
- * Compress input to output then close both files.
- */
-
-void gz_compress(in, out)
-    FILE   *in;
-    gzFile out;
-{
-    local char buf[BUFLEN];
-    int len;
-    int err;
-
-#ifdef USE_MMAP
-    /* Try first compressing with mmap. If mmap fails (minigzip used in a
-     * pipe), use the normal fread loop.
-     */
-    if (gz_compress_mmap(in, out) == Z_OK) return;
-#endif
-    for (;;) {
-        len = (int)fread(buf, 1, sizeof(buf), in);
-        if (ferror(in)) {
-            perror("fread");
-            exit(1);
-        }
-        if (len == 0) break;
-
-        if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
-    }
-    fclose(in);
-    if (gzclose(out) != Z_OK) error("failed gzclose");
-}
-
-#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
-
-/* Try compressing the input file at once using mmap. Return Z_OK if
- * if success, Z_ERRNO otherwise.
- */
-int gz_compress_mmap(in, out)
-    FILE   *in;
-    gzFile out;
-{
-    int len;
-    int err;
-    int ifd = fileno(in);
-    caddr_t buf;    /* mmap'ed buffer for the entire input file */
-    off_t buf_len;  /* length of the input file */
-    struct stat sb;
-
-    /* Determine the size of the file, needed for mmap: */
-    if (fstat(ifd, &sb) < 0) return Z_ERRNO;
-    buf_len = sb.st_size;
-    if (buf_len <= 0) return Z_ERRNO;
-
-    /* Now do the actual mmap: */
-    buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
-    if (buf == (caddr_t)(-1)) return Z_ERRNO;
-
-    /* Compress the whole file at once: */
-    len = gzwrite(out, (char *)buf, (unsigned)buf_len);
-
-    if (len != (int)buf_len) error(gzerror(out, &err));
-
-    munmap(buf, buf_len);
-    fclose(in);
-    if (gzclose(out) != Z_OK) error("failed gzclose");
-    return Z_OK;
-}
-#endif /* USE_MMAP */
-
-/* ===========================================================================
- * Uncompress input to output then close both files.
- */
-void gz_uncompress(in, out)
-    gzFile in;
-    FILE   *out;
-{
-    local char buf[BUFLEN];
-    int len;
-    int err;
-
-    for (;;) {
-        len = gzread(in, buf, sizeof(buf));
-        if (len < 0) error (gzerror(in, &err));
-        if (len == 0) break;
-
-        if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
-            error("failed fwrite");
-        }
-    }
-    if (fclose(out)) error("failed fclose");
-
-    if (gzclose(in) != Z_OK) error("failed gzclose");
-}
-
-
-/* ===========================================================================
- * Compress the given file: create a corresponding .gz file and remove the
- * original.
- */
-void file_compress(file, mode)
-    char  *file;
-    char  *mode;
-{
-    local char outfile[MAX_NAME_LEN];
-    FILE  *in;
-    gzFile out;
-
-    if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) {
-        fprintf(stderr, "%s: filename too long\n", prog);
-        exit(1);
-    }
-
-#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
-    snprintf(outfile, sizeof(outfile), "%s%s", file, GZ_SUFFIX);
-#else
-    strcpy(outfile, file);
-    strcat(outfile, GZ_SUFFIX);
-#endif
-
-    in = fopen(file, "rb");
-    if (in == NULL) {
-        perror(file);
-        exit(1);
-    }
-    out = gzopen(outfile, mode);
-    if (out == NULL) {
-        fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
-        exit(1);
-    }
-    gz_compress(in, out);
-
-    unlink(file);
-}
-
-
-/* ===========================================================================
- * Uncompress the given file and remove the original.
- */
-void file_uncompress(file)
-    char  *file;
-{
-    local char buf[MAX_NAME_LEN];
-    char *infile, *outfile;
-    FILE  *out;
-    gzFile in;
-    size_t len = strlen(file);
-
-    if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) {
-        fprintf(stderr, "%s: filename too long\n", prog);
-        exit(1);
-    }
-
-#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
-    snprintf(buf, sizeof(buf), "%s", file);
-#else
-    strcpy(buf, file);
-#endif
-
-    if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
-        infile = file;
-        outfile = buf;
-        outfile[len-3] = '\0';
-    } else {
-        outfile = file;
-        infile = buf;
-#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
-        snprintf(buf + len, sizeof(buf) - len, "%s", GZ_SUFFIX);
-#else
-        strcat(infile, GZ_SUFFIX);
-#endif
-    }
-    in = gzopen(infile, "rb");
-    if (in == NULL) {
-        fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
-        exit(1);
-    }
-    out = fopen(outfile, "wb");
-    if (out == NULL) {
-        perror(file);
-        exit(1);
-    }
-
-    gz_uncompress(in, out);
-
-    unlink(infile);
-}
-
-
-/* ===========================================================================
- * Usage:  minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...]
- *   -c : write to standard output
- *   -d : decompress
- *   -f : compress with Z_FILTERED
- *   -h : compress with Z_HUFFMAN_ONLY
- *   -r : compress with Z_RLE
- *   -1 to -9 : compression level
- */
-
-int main(argc, argv)
-    int argc;
-    char *argv[];
-{
-    int copyout = 0;
-    int uncompr = 0;
-    gzFile file;
-    char *bname, outmode[20];
-
-#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
-    snprintf(outmode, sizeof(outmode), "%s", "wb6 ");
-#else
-    strcpy(outmode, "wb6 ");
-#endif
-
-    prog = argv[0];
-    bname = strrchr(argv[0], '/');
-    if (bname)
-      bname++;
-    else
-      bname = argv[0];
-    argc--, argv++;
-
-    if (!strcmp(bname, "gunzip"))
-      uncompr = 1;
-    else if (!strcmp(bname, "zcat"))
-      copyout = uncompr = 1;
-
-    while (argc > 0) {
-      if (strcmp(*argv, "-c") == 0)
-        copyout = 1;
-      else if (strcmp(*argv, "-d") == 0)
-        uncompr = 1;
-      else if (strcmp(*argv, "-f") == 0)
-        outmode[3] = 'f';
-      else if (strcmp(*argv, "-h") == 0)
-        outmode[3] = 'h';
-      else if (strcmp(*argv, "-r") == 0)
-        outmode[3] = 'R';
-      else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
-               (*argv)[2] == 0)
-        outmode[2] = (*argv)[1];
-      else
-        break;
-      argc--, argv++;
-    }
-    if (outmode[3] == ' ')
-        outmode[3] = 0;
-    if (argc == 0) {
-        SET_BINARY_MODE(stdin);
-        SET_BINARY_MODE(stdout);
-        if (uncompr) {
-            file = gzdopen(fileno(stdin), "rb");
-            if (file == NULL) error("can't gzdopen stdin");
-            gz_uncompress(file, stdout);
-        } else {
-            file = gzdopen(fileno(stdout), outmode);
-            if (file == NULL) error("can't gzdopen stdout");
-            gz_compress(stdin, file);
-        }
-    } else {
-        if (copyout) {
-            SET_BINARY_MODE(stdout);
-        }
-        do {
-            if (uncompr) {
-                if (copyout) {
-                    file = gzopen(*argv, "rb");
-                    if (file == NULL)
-                        fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv);
-                    else
-                        gz_uncompress(file, stdout);
-                } else {
-                    file_uncompress(*argv);
-                }
-            } else {
-                if (copyout) {
-                    FILE * in = fopen(*argv, "rb");
-
-                    if (in == NULL) {
-                        perror(*argv);
-                    } else {
-                        file = gzdopen(fileno(stdout), outmode);
-                        if (file == NULL) error("can't gzdopen stdout");
-
-                        gz_compress(in, file);
-                    }
-
-                } else {
-                    file_compress(*argv, outmode);
-                }
-            }
-        } while (argv++, --argc);
-    }
-    return 0;
-}
diff --git a/Modules/zlib/trees.c b/Modules/zlib/trees.c
deleted file mode 100644
index 50cf4b4..0000000
--- a/Modules/zlib/trees.c
+++ /dev/null
@@ -1,1203 +0,0 @@
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2017 Jean-loup Gailly
- * detect_data_type() function provided freely by Cosmin Truta, 2006
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process uses several Huffman trees. The more
- *      common source values are represented by shorter bit sequences.
- *
- *      Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values).  The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      Storer, James A.
- *          Data Compression:  Methods and Theory, pp. 49-50.
- *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
- *
- *      Sedgewick, R.
- *          Algorithms, p290.
- *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* @(#) $Id$ */
-
-/* #define GEN_TREES_H */
-
-#include "deflate.h"
-
-#ifdef ZLIB_DEBUG
-#  include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6      16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10    17
-/* repeat a zero length 3-10 times  (3 bits of repeat count) */
-
-#define REPZ_11_138  18
-/* repeat a zero length 11-138 times  (7 bits of repeat count) */
-
-local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
-   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local const int extra_dbits[D_CODES] /* extra bits for each distance code */
-   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
-   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local const uch bl_order[BL_CODES]
-   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- */
-
-#define DIST_CODE_LEN  512 /* see definition of array dist_code below */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
-/* non ANSI compilers may not accept trees.h */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-uch _dist_code[DIST_CODE_LEN];
-/* Distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-uch _length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-#else
-#  include "trees.h"
-#endif /* GEN_TREES_H */
-
-struct static_tree_desc_s {
-    const ct_data *static_tree;  /* static tree or NULL */
-    const intf *extra_bits;      /* extra bits for each code or NULL */
-    int     extra_base;          /* base index for extra_bits */
-    int     elems;               /* max number of elements in the tree */
-    int     max_length;          /* max bit length for the codes */
-};
-
-local const static_tree_desc  static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local const static_tree_desc  static_d_desc =
-{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
-
-local const static_tree_desc  static_bl_desc =
-{(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void tr_static_init OF((void));
-local void init_block     OF((deflate_state *s));
-local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
-local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree     OF((deflate_state *s, tree_desc *desc));
-local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local int  build_bl_tree  OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
-                              int blcodes));
-local void compress_block OF((deflate_state *s, const ct_data *ltree,
-                              const ct_data *dtree));
-local int  detect_data_type OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup      OF((deflate_state *s));
-local void bi_flush       OF((deflate_state *s));
-
-#ifdef GEN_TREES_H
-local void gen_trees_header OF((void));
-#endif
-
-#ifndef ZLIB_DEBUG
-#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
-   /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* !ZLIB_DEBUG */
-#  define send_code(s, c, tree) \
-     { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
-       send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
-    put_byte(s, (uch)((w) & 0xff)); \
-    put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef ZLIB_DEBUG
-local void send_bits      OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
-    deflate_state *s;
-    int value;  /* value to send */
-    int length; /* number of bits */
-{
-    Tracevv((stderr," l %2d v %4x ", length, value));
-    Assert(length > 0 && length <= 15, "invalid length");
-    s->bits_sent += (ulg)length;
-
-    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
-     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
-     * unused bits in value.
-     */
-    if (s->bi_valid > (int)Buf_size - length) {
-        s->bi_buf |= (ush)value << s->bi_valid;
-        put_short(s, s->bi_buf);
-        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
-        s->bi_valid += length - Buf_size;
-    } else {
-        s->bi_buf |= (ush)value << s->bi_valid;
-        s->bi_valid += length;
-    }
-}
-#else /* !ZLIB_DEBUG */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
-  if (s->bi_valid > (int)Buf_size - len) {\
-    int val = (int)value;\
-    s->bi_buf |= (ush)val << s->bi_valid;\
-    put_short(s, s->bi_buf);\
-    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
-    s->bi_valid += len - Buf_size;\
-  } else {\
-    s->bi_buf |= (ush)(value) << s->bi_valid;\
-    s->bi_valid += len;\
-  }\
-}
-#endif /* ZLIB_DEBUG */
-
-
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables.
- */
-local void tr_static_init()
-{
-#if defined(GEN_TREES_H) || !defined(STDC)
-    static int static_init_done = 0;
-    int n;        /* iterates over tree elements */
-    int bits;     /* bit counter */
-    int length;   /* length value */
-    int code;     /* code value */
-    int dist;     /* distance index */
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    if (static_init_done) return;
-
-    /* For some embedded targets, global variables are not initialized: */
-#ifdef NO_INIT_GLOBAL_POINTERS
-    static_l_desc.static_tree = static_ltree;
-    static_l_desc.extra_bits = extra_lbits;
-    static_d_desc.static_tree = static_dtree;
-    static_d_desc.extra_bits = extra_dbits;
-    static_bl_desc.extra_bits = extra_blbits;
-#endif
-
-    /* Initialize the mapping length (0..255) -> length code (0..28) */
-    length = 0;
-    for (code = 0; code < LENGTH_CODES-1; code++) {
-        base_length[code] = length;
-        for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            _length_code[length++] = (uch)code;
-        }
-    }
-    Assert (length == 256, "tr_static_init: length != 256");
-    /* Note that the length 255 (match length 258) can be represented
-     * in two different ways: code 284 + 5 bits or code 285, so we
-     * overwrite length_code[255] to use the best encoding:
-     */
-    _length_code[length-1] = (uch)code;
-
-    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
-    dist = 0;
-    for (code = 0 ; code < 16; code++) {
-        base_dist[code] = dist;
-        for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            _dist_code[dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: dist != 256");
-    dist >>= 7; /* from now on, all distances are divided by 128 */
-    for ( ; code < D_CODES; code++) {
-        base_dist[code] = dist << 7;
-        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            _dist_code[256 + dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: 256+dist != 512");
-
-    /* Construct the codes of the static literal tree */
-    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
-    n = 0;
-    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
-    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
-    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
-    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
-    /* Codes 286 and 287 do not exist, but we must include them in the
-     * tree construction to get a canonical Huffman tree (longest code
-     * all ones)
-     */
-    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
-    /* The static distance tree is trivial: */
-    for (n = 0; n < D_CODES; n++) {
-        static_dtree[n].Len = 5;
-        static_dtree[n].Code = bi_reverse((unsigned)n, 5);
-    }
-    static_init_done = 1;
-
-#  ifdef GEN_TREES_H
-    gen_trees_header();
-#  endif
-#endif /* defined(GEN_TREES_H) || !defined(STDC) */
-}
-
-/* ===========================================================================
- * Genererate the file trees.h describing the static trees.
- */
-#ifdef GEN_TREES_H
-#  ifndef ZLIB_DEBUG
-#    include <stdio.h>
-#  endif
-
-#  define SEPARATOR(i, last, width) \
-      ((i) == (last)? "\n};\n\n" :    \
-       ((i) % (width) == (width)-1 ? ",\n" : ", "))
-
-void gen_trees_header()
-{
-    FILE *header = fopen("trees.h", "w");
-    int i;
-
-    Assert (header != NULL, "Can't open trees.h");
-    fprintf(header,
-            "/* header created automatically with -DGEN_TREES_H */\n\n");
-
-    fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
-    for (i = 0; i < L_CODES+2; i++) {
-        fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
-                static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
-    }
-
-    fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
-    for (i = 0; i < D_CODES; i++) {
-        fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
-                static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
-    }
-
-    fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n");
-    for (i = 0; i < DIST_CODE_LEN; i++) {
-        fprintf(header, "%2u%s", _dist_code[i],
-                SEPARATOR(i, DIST_CODE_LEN-1, 20));
-    }
-
-    fprintf(header,
-        "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
-    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
-        fprintf(header, "%2u%s", _length_code[i],
-                SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
-    }
-
-    fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
-    for (i = 0; i < LENGTH_CODES; i++) {
-        fprintf(header, "%1u%s", base_length[i],
-                SEPARATOR(i, LENGTH_CODES-1, 20));
-    }
-
-    fprintf(header, "local const int base_dist[D_CODES] = {\n");
-    for (i = 0; i < D_CODES; i++) {
-        fprintf(header, "%5u%s", base_dist[i],
-                SEPARATOR(i, D_CODES-1, 10));
-    }
-
-    fclose(header);
-}
-#endif /* GEN_TREES_H */
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-void ZLIB_INTERNAL _tr_init(s)
-    deflate_state *s;
-{
-    tr_static_init();
-
-    s->l_desc.dyn_tree = s->dyn_ltree;
-    s->l_desc.stat_desc = &static_l_desc;
-
-    s->d_desc.dyn_tree = s->dyn_dtree;
-    s->d_desc.stat_desc = &static_d_desc;
-
-    s->bl_desc.dyn_tree = s->bl_tree;
-    s->bl_desc.stat_desc = &static_bl_desc;
-
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-#ifdef ZLIB_DEBUG
-    s->compressed_len = 0L;
-    s->bits_sent = 0L;
-#endif
-
-    /* Initialize the first block of the first file: */
-    init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
-    deflate_state *s;
-{
-    int n; /* iterates over tree elements */
-
-    /* Initialize the trees. */
-    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
-    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
-    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
-    s->dyn_ltree[END_BLOCK].Freq = 1;
-    s->opt_len = s->static_len = 0L;
-    s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
-    top = s->heap[SMALLEST]; \
-    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
-    pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
-   (tree[n].Freq < tree[m].Freq || \
-   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
-    deflate_state *s;
-    ct_data *tree;  /* the tree to restore */
-    int k;               /* node to move down */
-{
-    int v = s->heap[k];
-    int j = k << 1;  /* left son of k */
-    while (j <= s->heap_len) {
-        /* Set j to the smallest of the two sons: */
-        if (j < s->heap_len &&
-            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
-            j++;
-        }
-        /* Exit if v is smaller than both sons */
-        if (smaller(tree, v, s->heap[j], s->depth)) break;
-
-        /* Exchange v with the smallest son */
-        s->heap[k] = s->heap[j];  k = j;
-
-        /* And continue down the tree, setting j to the left son of k */
-        j <<= 1;
-    }
-    s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- *    above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- *     array bl_count contains the frequencies for each bit length.
- *     The length opt_len is updated; static_len is also updated if stree is
- *     not null.
- */
-local void gen_bitlen(s, desc)
-    deflate_state *s;
-    tree_desc *desc;    /* the tree descriptor */
-{
-    ct_data *tree        = desc->dyn_tree;
-    int max_code         = desc->max_code;
-    const ct_data *stree = desc->stat_desc->static_tree;
-    const intf *extra    = desc->stat_desc->extra_bits;
-    int base             = desc->stat_desc->extra_base;
-    int max_length       = desc->stat_desc->max_length;
-    int h;              /* heap index */
-    int n, m;           /* iterate over the tree elements */
-    int bits;           /* bit length */
-    int xbits;          /* extra bits */
-    ush f;              /* frequency */
-    int overflow = 0;   /* number of elements with bit length too large */
-
-    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
-    /* In a first pass, compute the optimal bit lengths (which may
-     * overflow in the case of the bit length tree).
-     */
-    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
-    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
-        n = s->heap[h];
-        bits = tree[tree[n].Dad].Len + 1;
-        if (bits > max_length) bits = max_length, overflow++;
-        tree[n].Len = (ush)bits;
-        /* We overwrite tree[n].Dad which is no longer needed */
-
-        if (n > max_code) continue; /* not a leaf node */
-
-        s->bl_count[bits]++;
-        xbits = 0;
-        if (n >= base) xbits = extra[n-base];
-        f = tree[n].Freq;
-        s->opt_len += (ulg)f * (unsigned)(bits + xbits);
-        if (stree) s->static_len += (ulg)f * (unsigned)(stree[n].Len + xbits);
-    }
-    if (overflow == 0) return;
-
-    Tracev((stderr,"\nbit length overflow\n"));
-    /* This happens for example on obj2 and pic of the Calgary corpus */
-
-    /* Find the first bit length which could increase: */
-    do {
-        bits = max_length-1;
-        while (s->bl_count[bits] == 0) bits--;
-        s->bl_count[bits]--;      /* move one leaf down the tree */
-        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
-        s->bl_count[max_length]--;
-        /* The brother of the overflow item also moves one step up,
-         * but this does not affect bl_count[max_length]
-         */
-        overflow -= 2;
-    } while (overflow > 0);
-
-    /* Now recompute all bit lengths, scanning in increasing frequency.
-     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
-     * lengths instead of fixing only the wrong ones. This idea is taken
-     * from 'ar' written by Haruhiko Okumura.)
-     */
-    for (bits = max_length; bits != 0; bits--) {
-        n = s->bl_count[bits];
-        while (n != 0) {
-            m = s->heap[--h];
-            if (m > max_code) continue;
-            if ((unsigned) tree[m].Len != (unsigned) bits) {
-                Tracev((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
-                s->opt_len += ((ulg)bits - tree[m].Len) * tree[m].Freq;
-                tree[m].Len = (ush)bits;
-            }
-            n--;
-        }
-    }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- *     zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
-    ct_data *tree;             /* the tree to decorate */
-    int max_code;              /* largest code with non zero frequency */
-    ushf *bl_count;            /* number of codes at each bit length */
-{
-    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    unsigned code = 0;         /* running code value */
-    int bits;                  /* bit index */
-    int n;                     /* code index */
-
-    /* The distribution counts are first used to generate the code values
-     * without bit reversal.
-     */
-    for (bits = 1; bits <= MAX_BITS; bits++) {
-        code = (code + bl_count[bits-1]) << 1;
-        next_code[bits] = (ush)code;
-    }
-    /* Check that the bit counts in bl_count are consistent. The last code
-     * must be all ones.
-     */
-    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
-            "inconsistent bit counts");
-    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
-    for (n = 0;  n <= max_code; n++) {
-        int len = tree[n].Len;
-        if (len == 0) continue;
-        /* Now reverse the bits */
-        tree[n].Code = (ush)bi_reverse(next_code[len]++, len);
-
-        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
-             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
-    }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- *     and corresponding code. The length opt_len is updated; static_len is
- *     also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
-    deflate_state *s;
-    tree_desc *desc; /* the tree descriptor */
-{
-    ct_data *tree         = desc->dyn_tree;
-    const ct_data *stree  = desc->stat_desc->static_tree;
-    int elems             = desc->stat_desc->elems;
-    int n, m;          /* iterate over heap elements */
-    int max_code = -1; /* largest code with non zero frequency */
-    int node;          /* new node being created */
-
-    /* Construct the initial heap, with least frequent element in
-     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
-     * heap[0] is not used.
-     */
-    s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
-    for (n = 0; n < elems; n++) {
-        if (tree[n].Freq != 0) {
-            s->heap[++(s->heap_len)] = max_code = n;
-            s->depth[n] = 0;
-        } else {
-            tree[n].Len = 0;
-        }
-    }
-
-    /* The pkzip format requires that at least one distance code exists,
-     * and that at least one bit should be sent even if there is only one
-     * possible code. So to avoid special checks later on we force at least
-     * two codes of non zero frequency.
-     */
-    while (s->heap_len < 2) {
-        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
-        tree[node].Freq = 1;
-        s->depth[node] = 0;
-        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
-        /* node is 0 or 1 so it does not have extra bits */
-    }
-    desc->max_code = max_code;
-
-    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
-     * establish sub-heaps of increasing lengths:
-     */
-    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
-    /* Construct the Huffman tree by repeatedly combining the least two
-     * frequent nodes.
-     */
-    node = elems;              /* next internal node of the tree */
-    do {
-        pqremove(s, tree, n);  /* n = node of least frequency */
-        m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
-        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
-        s->heap[--(s->heap_max)] = m;
-
-        /* Create a new node father of n and m */
-        tree[node].Freq = tree[n].Freq + tree[m].Freq;
-        s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ?
-                                s->depth[n] : s->depth[m]) + 1);
-        tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
-        if (tree == s->bl_tree) {
-            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
-                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
-        }
-#endif
-        /* and insert the new node in the heap */
-        s->heap[SMALLEST] = node++;
-        pqdownheap(s, tree, SMALLEST);
-
-    } while (s->heap_len >= 2);
-
-    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
-    /* At this point, the fields freq and dad are set. We can now
-     * generate the bit lengths.
-     */
-    gen_bitlen(s, (tree_desc *)desc);
-
-    /* The field len is now set, we can generate the bit codes */
-    gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree;   /* the tree to be scanned */
-    int max_code;    /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    if (nextlen == 0) max_count = 138, min_count = 3;
-    tree[max_code+1].Len = (ush)0xffff; /* guard */
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            s->bl_tree[curlen].Freq += count;
-        } else if (curlen != 0) {
-            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
-            s->bl_tree[REP_3_6].Freq++;
-        } else if (count <= 10) {
-            s->bl_tree[REPZ_3_10].Freq++;
-        } else {
-            s->bl_tree[REPZ_11_138].Freq++;
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree; /* the tree to be scanned */
-    int max_code;       /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    /* tree[max_code+1].Len = -1; */  /* guard already set */
-    if (nextlen == 0) max_count = 138, min_count = 3;
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
-        } else if (curlen != 0) {
-            if (curlen != prevlen) {
-                send_code(s, curlen, s->bl_tree); count--;
-            }
-            Assert(count >= 3 && count <= 6, " 3_6?");
-            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
-        } else if (count <= 10) {
-            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
-        } else {
-            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
-    deflate_state *s;
-{
-    int max_blindex;  /* index of last bit length code of non zero freq */
-
-    /* Determine the bit length frequencies for literal and distance trees */
-    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
-    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
-    /* Build the bit length tree: */
-    build_tree(s, (tree_desc *)(&(s->bl_desc)));
-    /* opt_len now includes the length of the tree representations, except
-     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
-     */
-
-    /* Determine the number of bit length codes to send. The pkzip format
-     * requires that at least 4 bit length codes be sent. (appnote.txt says
-     * 3 but the actual value used is 4.)
-     */
-    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
-        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
-    }
-    /* Update opt_len to include the bit length tree and counts */
-    s->opt_len += 3*((ulg)max_blindex+1) + 5+5+4;
-    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
-            s->opt_len, s->static_len));
-
-    return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
-    deflate_state *s;
-    int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
-    int rank;                    /* index in bl_order */
-
-    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
-    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
-            "too many codes");
-    Tracev((stderr, "\nbl counts: "));
-    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
-    send_bits(s, dcodes-1,   5);
-    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
-    for (rank = 0; rank < blcodes; rank++) {
-        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
-        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
-    }
-    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
-    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
-    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
-    deflate_state *s;
-    charf *buf;       /* input block */
-    ulg stored_len;   /* length of input block */
-    int last;         /* one if this is the last block for a file */
-{
-    send_bits(s, (STORED_BLOCK<<1)+last, 3);    /* send block type */
-    bi_windup(s);        /* align on byte boundary */
-    put_short(s, (ush)stored_len);
-    put_short(s, (ush)~stored_len);
-    zmemcpy(s->pending_buf + s->pending, (Bytef *)buf, stored_len);
-    s->pending += stored_len;
-#ifdef ZLIB_DEBUG
-    s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
-    s->compressed_len += (stored_len + 4) << 3;
-    s->bits_sent += 2*16;
-    s->bits_sent += stored_len<<3;
-#endif
-}
-
-/* ===========================================================================
- * Flush the bits in the bit buffer to pending output (leaves at most 7 bits)
- */
-void ZLIB_INTERNAL _tr_flush_bits(s)
-    deflate_state *s;
-{
-    bi_flush(s);
-}
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- */
-void ZLIB_INTERNAL _tr_align(s)
-    deflate_state *s;
-{
-    send_bits(s, STATIC_TREES<<1, 3);
-    send_code(s, END_BLOCK, static_ltree);
-#ifdef ZLIB_DEBUG
-    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
-#endif
-    bi_flush(s);
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and write out the encoded block.
- */
-void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
-    deflate_state *s;
-    charf *buf;       /* input block, or NULL if too old */
-    ulg stored_len;   /* length of input block */
-    int last;         /* one if this is the last block for a file */
-{
-    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
-    int max_blindex = 0;  /* index of last bit length code of non zero freq */
-
-    /* Build the Huffman trees unless a stored block is forced */
-    if (s->level > 0) {
-
-        /* Check if the file is binary or text */
-        if (s->strm->data_type == Z_UNKNOWN)
-            s->strm->data_type = detect_data_type(s);
-
-        /* Construct the literal and distance trees */
-        build_tree(s, (tree_desc *)(&(s->l_desc)));
-        Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
-                s->static_len));
-
-        build_tree(s, (tree_desc *)(&(s->d_desc)));
-        Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
-                s->static_len));
-        /* At this point, opt_len and static_len are the total bit lengths of
-         * the compressed block data, excluding the tree representations.
-         */
-
-        /* Build the bit length tree for the above two trees, and get the index
-         * in bl_order of the last bit length code to send.
-         */
-        max_blindex = build_bl_tree(s);
-
-        /* Determine the best encoding. Compute the block lengths in bytes. */
-        opt_lenb = (s->opt_len+3+7)>>3;
-        static_lenb = (s->static_len+3+7)>>3;
-
-        Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
-                opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
-                s->last_lit));
-
-        if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
-    } else {
-        Assert(buf != (char*)0, "lost buf");
-        opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
-    }
-
-#ifdef FORCE_STORED
-    if (buf != (char*)0) { /* force stored block */
-#else
-    if (stored_len+4 <= opt_lenb && buf != (char*)0) {
-                       /* 4: two words for the lengths */
-#endif
-        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
-         * Otherwise we can't have processed more than WSIZE input bytes since
-         * the last block flush, because compression would have been
-         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
-         * transform a block into a stored block.
-         */
-        _tr_stored_block(s, buf, stored_len, last);
-
-#ifdef FORCE_STATIC
-    } else if (static_lenb >= 0) { /* force static trees */
-#else
-    } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
-#endif
-        send_bits(s, (STATIC_TREES<<1)+last, 3);
-        compress_block(s, (const ct_data *)static_ltree,
-                       (const ct_data *)static_dtree);
-#ifdef ZLIB_DEBUG
-        s->compressed_len += 3 + s->static_len;
-#endif
-    } else {
-        send_bits(s, (DYN_TREES<<1)+last, 3);
-        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
-                       max_blindex+1);
-        compress_block(s, (const ct_data *)s->dyn_ltree,
-                       (const ct_data *)s->dyn_dtree);
-#ifdef ZLIB_DEBUG
-        s->compressed_len += 3 + s->opt_len;
-#endif
-    }
-    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
-    /* The above check is made mod 2^32, for files larger than 512 MB
-     * and uLong implemented on 32 bits.
-     */
-    init_block(s);
-
-    if (last) {
-        bi_windup(s);
-#ifdef ZLIB_DEBUG
-        s->compressed_len += 7;  /* align on byte boundary */
-#endif
-    }
-    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
-           s->compressed_len-7*last));
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-int ZLIB_INTERNAL _tr_tally (s, dist, lc)
-    deflate_state *s;
-    unsigned dist;  /* distance of matched string */
-    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
-    s->d_buf[s->last_lit] = (ush)dist;
-    s->l_buf[s->last_lit++] = (uch)lc;
-    if (dist == 0) {
-        /* lc is the unmatched char */
-        s->dyn_ltree[lc].Freq++;
-    } else {
-        s->matches++;
-        /* Here, lc is the match length - MIN_MATCH */
-        dist--;             /* dist = match distance - 1 */
-        Assert((ush)dist < (ush)MAX_DIST(s) &&
-               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
-               (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
-
-        s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
-        s->dyn_dtree[d_code(dist)].Freq++;
-    }
-
-#ifdef TRUNCATE_BLOCK
-    /* Try to guess if it is profitable to stop the current block here */
-    if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
-        /* Compute an upper bound for the compressed length */
-        ulg out_length = (ulg)s->last_lit*8L;
-        ulg in_length = (ulg)((long)s->strstart - s->block_start);
-        int dcode;
-        for (dcode = 0; dcode < D_CODES; dcode++) {
-            out_length += (ulg)s->dyn_dtree[dcode].Freq *
-                (5L+extra_dbits[dcode]);
-        }
-        out_length >>= 3;
-        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
-               s->last_lit, in_length, out_length,
-               100L - out_length*100L/in_length));
-        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
-    }
-#endif
-    return (s->last_lit == s->lit_bufsize-1);
-    /* We avoid equality with lit_bufsize because of wraparound at 64K
-     * on 16 bit machines and because stored blocks are restricted to
-     * 64K-1 bytes.
-     */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
-    deflate_state *s;
-    const ct_data *ltree; /* literal tree */
-    const ct_data *dtree; /* distance tree */
-{
-    unsigned dist;      /* distance of matched string */
-    int lc;             /* match length or unmatched char (if dist == 0) */
-    unsigned lx = 0;    /* running index in l_buf */
-    unsigned code;      /* the code to send */
-    int extra;          /* number of extra bits to send */
-
-    if (s->last_lit != 0) do {
-        dist = s->d_buf[lx];
-        lc = s->l_buf[lx++];
-        if (dist == 0) {
-            send_code(s, lc, ltree); /* send a literal byte */
-            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
-        } else {
-            /* Here, lc is the match length - MIN_MATCH */
-            code = _length_code[lc];
-            send_code(s, code+LITERALS+1, ltree); /* send the length code */
-            extra = extra_lbits[code];
-            if (extra != 0) {
-                lc -= base_length[code];
-                send_bits(s, lc, extra);       /* send the extra length bits */
-            }
-            dist--; /* dist is now the match distance - 1 */
-            code = d_code(dist);
-            Assert (code < D_CODES, "bad d_code");
-
-            send_code(s, code, dtree);       /* send the distance code */
-            extra = extra_dbits[code];
-            if (extra != 0) {
-                dist -= (unsigned)base_dist[code];
-                send_bits(s, dist, extra);   /* send the extra distance bits */
-            }
-        } /* literal or match pair ? */
-
-        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
-        Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx,
-               "pendingBuf overflow");
-
-    } while (lx < s->last_lit);
-
-    send_code(s, END_BLOCK, ltree);
-}
-
-/* ===========================================================================
- * Check if the data type is TEXT or BINARY, using the following algorithm:
- * - TEXT if the two conditions below are satisfied:
- *    a) There are no non-portable control characters belonging to the
- *       "black list" (0..6, 14..25, 28..31).
- *    b) There is at least one printable character belonging to the
- *       "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
- * - BINARY otherwise.
- * - The following partially-portable control characters form a
- *   "gray list" that is ignored in this detection algorithm:
- *   (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
- * IN assertion: the fields Freq of dyn_ltree are set.
- */
-local int detect_data_type(s)
-    deflate_state *s;
-{
-    /* black_mask is the bit mask of black-listed bytes
-     * set bits 0..6, 14..25, and 28..31
-     * 0xf3ffc07f = binary 11110011111111111100000001111111
-     */
-    unsigned long black_mask = 0xf3ffc07fUL;
-    int n;
-
-    /* Check for non-textual ("black-listed") bytes. */
-    for (n = 0; n <= 31; n++, black_mask >>= 1)
-        if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0))
-            return Z_BINARY;
-
-    /* Check for textual ("white-listed") bytes. */
-    if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
-            || s->dyn_ltree[13].Freq != 0)
-        return Z_TEXT;
-    for (n = 32; n < LITERALS; n++)
-        if (s->dyn_ltree[n].Freq != 0)
-            return Z_TEXT;
-
-    /* There are no "black-listed" or "white-listed" bytes:
-     * this stream either is empty or has tolerated ("gray-listed") bytes only.
-     */
-    return Z_BINARY;
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
-    unsigned code; /* the value to invert */
-    int len;       /* its bit length */
-{
-    register unsigned res = 0;
-    do {
-        res |= code & 1;
-        code >>= 1, res <<= 1;
-    } while (--len > 0);
-    return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
-    deflate_state *s;
-{
-    if (s->bi_valid == 16) {
-        put_short(s, s->bi_buf);
-        s->bi_buf = 0;
-        s->bi_valid = 0;
-    } else if (s->bi_valid >= 8) {
-        put_byte(s, (Byte)s->bi_buf);
-        s->bi_buf >>= 8;
-        s->bi_valid -= 8;
-    }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
-    deflate_state *s;
-{
-    if (s->bi_valid > 8) {
-        put_short(s, s->bi_buf);
-    } else if (s->bi_valid > 0) {
-        put_byte(s, (Byte)s->bi_buf);
-    }
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-#ifdef ZLIB_DEBUG
-    s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
diff --git a/Modules/zlib/trees.h b/Modules/zlib/trees.h
deleted file mode 100644
index d35639d..0000000
--- a/Modules/zlib/trees.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* header created automatically with -DGEN_TREES_H */
-
-local const ct_data static_ltree[L_CODES+2] = {
-{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
-{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
-{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
-{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
-{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
-{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
-{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
-{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
-{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
-{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
-{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
-{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
-{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
-{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
-{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
-{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
-{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
-{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
-{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
-{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
-{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
-{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
-{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
-{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
-{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
-{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
-{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
-{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
-{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
-{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
-{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
-{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
-{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
-{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
-{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
-{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
-{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
-{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
-{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
-{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
-{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
-{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
-{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
-{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
-{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
-{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
-{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
-{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
-{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
-{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
-{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
-{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
-{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
-{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
-{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
-{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
-{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
-{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
-};
-
-local const ct_data static_dtree[D_CODES] = {
-{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
-{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
-{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
-{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
-{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
-{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
-};
-
-const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {
- 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
- 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
-10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
-11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
-12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
-13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
-13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
-18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
-23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
-};
-
-const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {
- 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
-13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
-17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
-19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
-21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
-22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
-23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
-};
-
-local const int base_length[LENGTH_CODES] = {
-0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
-64, 80, 96, 112, 128, 160, 192, 224, 0
-};
-
-local const int base_dist[D_CODES] = {
-    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
-   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
- 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
-};
-
diff --git a/Modules/zlib/uncompr.c b/Modules/zlib/uncompr.c
deleted file mode 100644
index f03a1a8..0000000
--- a/Modules/zlib/uncompr.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* uncompr.c -- decompress a memory buffer
- * Copyright (C) 1995-2003, 2010, 2014, 2016 Jean-loup Gailly, Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#define ZLIB_INTERNAL
-#include "zlib.h"
-
-/* ===========================================================================
-     Decompresses the source buffer into the destination buffer.  *sourceLen is
-   the byte length of the source buffer. Upon entry, *destLen is the total size
-   of the destination buffer, which must be large enough to hold the entire
-   uncompressed data. (The size of the uncompressed data must have been saved
-   previously by the compressor and transmitted to the decompressor by some
-   mechanism outside the scope of this compression library.) Upon exit,
-   *destLen is the size of the decompressed data and *sourceLen is the number
-   of source bytes consumed. Upon return, source + *sourceLen points to the
-   first unused input byte.
-
-     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_BUF_ERROR if there was not enough room in the output buffer, or
-   Z_DATA_ERROR if the input data was corrupted, including if the input data is
-   an incomplete zlib stream.
-*/
-int ZEXPORT uncompress2 (dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong *sourceLen;
-{
-    z_stream stream;
-    int err;
-    const uInt max = (uInt)-1;
-    uLong len, left;
-    Byte buf[1];    /* for detection of incomplete stream when *destLen == 0 */
-
-    len = *sourceLen;
-    if (*destLen) {
-        left = *destLen;
-        *destLen = 0;
-    }
-    else {
-        left = 1;
-        dest = buf;
-    }
-
-    stream.next_in = (z_const Bytef *)source;
-    stream.avail_in = 0;
-    stream.zalloc = (alloc_func)0;
-    stream.zfree = (free_func)0;
-    stream.opaque = (voidpf)0;
-
-    err = inflateInit(&stream);
-    if (err != Z_OK) return err;
-
-    stream.next_out = dest;
-    stream.avail_out = 0;
-
-    do {
-        if (stream.avail_out == 0) {
-            stream.avail_out = left > (uLong)max ? max : (uInt)left;
-            left -= stream.avail_out;
-        }
-        if (stream.avail_in == 0) {
-            stream.avail_in = len > (uLong)max ? max : (uInt)len;
-            len -= stream.avail_in;
-        }
-        err = inflate(&stream, Z_NO_FLUSH);
-    } while (err == Z_OK);
-
-    *sourceLen -= len + stream.avail_in;
-    if (dest != buf)
-        *destLen = stream.total_out;
-    else if (stream.total_out && err == Z_BUF_ERROR)
-        left = 1;
-
-    inflateEnd(&stream);
-    return err == Z_STREAM_END ? Z_OK :
-           err == Z_NEED_DICT ? Z_DATA_ERROR  :
-           err == Z_BUF_ERROR && left + stream.avail_out ? Z_DATA_ERROR :
-           err;
-}
-
-int ZEXPORT uncompress (dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-{
-    return uncompress2(dest, destLen, source, &sourceLen);
-}
diff --git a/Modules/zlib/zconf.h b/Modules/zlib/zconf.h
deleted file mode 100644
index 5e1d68a..0000000
--- a/Modules/zlib/zconf.h
+++ /dev/null
@@ -1,534 +0,0 @@
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#ifndef ZCONF_H
-#define ZCONF_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- * Even better than compiling with -DZ_PREFIX would be to use configure to set
- * this permanently in zconf.h using "./configure --zprefix".
- */
-#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
-#  define Z_PREFIX_SET
-
-/* all linked symbols and init macros */
-#  define _dist_code            z__dist_code
-#  define _length_code          z__length_code
-#  define _tr_align             z__tr_align
-#  define _tr_flush_bits        z__tr_flush_bits
-#  define _tr_flush_block       z__tr_flush_block
-#  define _tr_init              z__tr_init
-#  define _tr_stored_block      z__tr_stored_block
-#  define _tr_tally             z__tr_tally
-#  define adler32               z_adler32
-#  define adler32_combine       z_adler32_combine
-#  define adler32_combine64     z_adler32_combine64
-#  define adler32_z             z_adler32_z
-#  ifndef Z_SOLO
-#    define compress              z_compress
-#    define compress2             z_compress2
-#    define compressBound         z_compressBound
-#  endif
-#  define crc32                 z_crc32
-#  define crc32_combine         z_crc32_combine
-#  define crc32_combine64       z_crc32_combine64
-#  define crc32_z               z_crc32_z
-#  define deflate               z_deflate
-#  define deflateBound          z_deflateBound
-#  define deflateCopy           z_deflateCopy
-#  define deflateEnd            z_deflateEnd
-#  define deflateGetDictionary  z_deflateGetDictionary
-#  define deflateInit           z_deflateInit
-#  define deflateInit2          z_deflateInit2
-#  define deflateInit2_         z_deflateInit2_
-#  define deflateInit_          z_deflateInit_
-#  define deflateParams         z_deflateParams
-#  define deflatePending        z_deflatePending
-#  define deflatePrime          z_deflatePrime
-#  define deflateReset          z_deflateReset
-#  define deflateResetKeep      z_deflateResetKeep
-#  define deflateSetDictionary  z_deflateSetDictionary
-#  define deflateSetHeader      z_deflateSetHeader
-#  define deflateTune           z_deflateTune
-#  define deflate_copyright     z_deflate_copyright
-#  define get_crc_table         z_get_crc_table
-#  ifndef Z_SOLO
-#    define gz_error              z_gz_error
-#    define gz_intmax             z_gz_intmax
-#    define gz_strwinerror        z_gz_strwinerror
-#    define gzbuffer              z_gzbuffer
-#    define gzclearerr            z_gzclearerr
-#    define gzclose               z_gzclose
-#    define gzclose_r             z_gzclose_r
-#    define gzclose_w             z_gzclose_w
-#    define gzdirect              z_gzdirect
-#    define gzdopen               z_gzdopen
-#    define gzeof                 z_gzeof
-#    define gzerror               z_gzerror
-#    define gzflush               z_gzflush
-#    define gzfread               z_gzfread
-#    define gzfwrite              z_gzfwrite
-#    define gzgetc                z_gzgetc
-#    define gzgetc_               z_gzgetc_
-#    define gzgets                z_gzgets
-#    define gzoffset              z_gzoffset
-#    define gzoffset64            z_gzoffset64
-#    define gzopen                z_gzopen
-#    define gzopen64              z_gzopen64
-#    ifdef _WIN32
-#      define gzopen_w              z_gzopen_w
-#    endif
-#    define gzprintf              z_gzprintf
-#    define gzputc                z_gzputc
-#    define gzputs                z_gzputs
-#    define gzread                z_gzread
-#    define gzrewind              z_gzrewind
-#    define gzseek                z_gzseek
-#    define gzseek64              z_gzseek64
-#    define gzsetparams           z_gzsetparams
-#    define gztell                z_gztell
-#    define gztell64              z_gztell64
-#    define gzungetc              z_gzungetc
-#    define gzvprintf             z_gzvprintf
-#    define gzwrite               z_gzwrite
-#  endif
-#  define inflate               z_inflate
-#  define inflateBack           z_inflateBack
-#  define inflateBackEnd        z_inflateBackEnd
-#  define inflateBackInit       z_inflateBackInit
-#  define inflateBackInit_      z_inflateBackInit_
-#  define inflateCodesUsed      z_inflateCodesUsed
-#  define inflateCopy           z_inflateCopy
-#  define inflateEnd            z_inflateEnd
-#  define inflateGetDictionary  z_inflateGetDictionary
-#  define inflateGetHeader      z_inflateGetHeader
-#  define inflateInit           z_inflateInit
-#  define inflateInit2          z_inflateInit2
-#  define inflateInit2_         z_inflateInit2_
-#  define inflateInit_          z_inflateInit_
-#  define inflateMark           z_inflateMark
-#  define inflatePrime          z_inflatePrime
-#  define inflateReset          z_inflateReset
-#  define inflateReset2         z_inflateReset2
-#  define inflateResetKeep      z_inflateResetKeep
-#  define inflateSetDictionary  z_inflateSetDictionary
-#  define inflateSync           z_inflateSync
-#  define inflateSyncPoint      z_inflateSyncPoint
-#  define inflateUndermine      z_inflateUndermine
-#  define inflateValidate       z_inflateValidate
-#  define inflate_copyright     z_inflate_copyright
-#  define inflate_fast          z_inflate_fast
-#  define inflate_table         z_inflate_table
-#  ifndef Z_SOLO
-#    define uncompress            z_uncompress
-#    define uncompress2           z_uncompress2
-#  endif
-#  define zError                z_zError
-#  ifndef Z_SOLO
-#    define zcalloc               z_zcalloc
-#    define zcfree                z_zcfree
-#  endif
-#  define zlibCompileFlags      z_zlibCompileFlags
-#  define zlibVersion           z_zlibVersion
-
-/* all zlib typedefs in zlib.h and zconf.h */
-#  define Byte                  z_Byte
-#  define Bytef                 z_Bytef
-#  define alloc_func            z_alloc_func
-#  define charf                 z_charf
-#  define free_func             z_free_func
-#  ifndef Z_SOLO
-#    define gzFile                z_gzFile
-#  endif
-#  define gz_header             z_gz_header
-#  define gz_headerp            z_gz_headerp
-#  define in_func               z_in_func
-#  define intf                  z_intf
-#  define out_func              z_out_func
-#  define uInt                  z_uInt
-#  define uIntf                 z_uIntf
-#  define uLong                 z_uLong
-#  define uLongf                z_uLongf
-#  define voidp                 z_voidp
-#  define voidpc                z_voidpc
-#  define voidpf                z_voidpf
-
-/* all zlib structs in zlib.h and zconf.h */
-#  define gz_header_s           z_gz_header_s
-#  define internal_state        z_internal_state
-
-#endif
-
-#if defined(__MSDOS__) && !defined(MSDOS)
-#  define MSDOS
-#endif
-#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
-#  define OS2
-#endif
-#if defined(_WINDOWS) && !defined(WINDOWS)
-#  define WINDOWS
-#endif
-#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
-#  ifndef WIN32
-#    define WIN32
-#  endif
-#endif
-#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
-#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
-#    ifndef SYS16BIT
-#      define SYS16BIT
-#    endif
-#  endif
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#ifdef SYS16BIT
-#  define MAXSEG_64K
-#endif
-#ifdef MSDOS
-#  define UNALIGNED_OK
-#endif
-
-#ifdef __STDC_VERSION__
-#  ifndef STDC
-#    define STDC
-#  endif
-#  if __STDC_VERSION__ >= 199901L
-#    ifndef STDC99
-#      define STDC99
-#    endif
-#  endif
-#endif
-#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
-#  define STDC
-#endif
-
-#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
-#  define STDC
-#endif
-
-#ifndef STDC
-#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-#    define const       /* note: need a more gentle solution here */
-#  endif
-#endif
-
-#if defined(ZLIB_CONST) && !defined(z_const)
-#  define z_const const
-#else
-#  define z_const
-#endif
-
-#ifdef Z_SOLO
-   typedef unsigned long z_size_t;
-#else
-#  define z_longlong long long
-#  if defined(NO_SIZE_T)
-     typedef unsigned NO_SIZE_T z_size_t;
-#  elif defined(STDC)
-#    include <stddef.h>
-     typedef size_t z_size_t;
-#  else
-     typedef unsigned long z_size_t;
-#  endif
-#  undef z_longlong
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2.
- * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
- * created by gzip. (Files created by minigzip can still be extracted by
- * gzip.)
- */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            (1 << (windowBits+2)) +  (1 << (memLevel+9))
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-#ifndef Z_ARG /* function prototypes for stdarg */
-#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#    define Z_ARG(args)  args
-#  else
-#    define Z_ARG(args)  ()
-#  endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#ifdef SYS16BIT
-#  if defined(M_I86SM) || defined(M_I86MM)
-     /* MSC small or medium model */
-#    define SMALL_MEDIUM
-#    ifdef _MSC_VER
-#      define FAR _far
-#    else
-#      define FAR far
-#    endif
-#  endif
-#  if (defined(__SMALL__) || defined(__MEDIUM__))
-     /* Turbo C small or medium model */
-#    define SMALL_MEDIUM
-#    ifdef __BORLANDC__
-#      define FAR _far
-#    else
-#      define FAR far
-#    endif
-#  endif
-#endif
-
-#if defined(WINDOWS) || defined(WIN32)
-   /* If building or using zlib as a DLL, define ZLIB_DLL.
-    * This is not mandatory, but it offers a little performance increase.
-    */
-#  ifdef ZLIB_DLL
-#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
-#      ifdef ZLIB_INTERNAL
-#        define ZEXTERN extern __declspec(dllexport)
-#      else
-#        define ZEXTERN extern __declspec(dllimport)
-#      endif
-#    endif
-#  endif  /* ZLIB_DLL */
-   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
-    * define ZLIB_WINAPI.
-    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
-    */
-#  ifdef ZLIB_WINAPI
-#    ifdef FAR
-#      undef FAR
-#    endif
-#    include <windows.h>
-     /* No need for _export, use ZLIB.DEF instead. */
-     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
-#    define ZEXPORT WINAPI
-#    ifdef WIN32
-#      define ZEXPORTVA WINAPIV
-#    else
-#      define ZEXPORTVA FAR CDECL
-#    endif
-#  endif
-#endif
-
-#if defined (__BEOS__)
-#  ifdef ZLIB_DLL
-#    ifdef ZLIB_INTERNAL
-#      define ZEXPORT   __declspec(dllexport)
-#      define ZEXPORTVA __declspec(dllexport)
-#    else
-#      define ZEXPORT   __declspec(dllimport)
-#      define ZEXPORTVA __declspec(dllimport)
-#    endif
-#  endif
-#endif
-
-#ifndef ZEXTERN
-#  define ZEXTERN extern
-#endif
-#ifndef ZEXPORT
-#  define ZEXPORT
-#endif
-#ifndef ZEXPORTVA
-#  define ZEXPORTVA
-#endif
-
-#ifndef FAR
-#  define FAR
-#endif
-
-#if !defined(__MACTYPES__)
-typedef unsigned char  Byte;  /* 8 bits */
-#endif
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-#ifdef SMALL_MEDIUM
-   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
-#  define Bytef Byte FAR
-#else
-   typedef Byte  FAR Bytef;
-#endif
-typedef char  FAR charf;
-typedef int   FAR intf;
-typedef uInt  FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void const *voidpc;
-   typedef void FAR   *voidpf;
-   typedef void       *voidp;
-#else
-   typedef Byte const *voidpc;
-   typedef Byte FAR   *voidpf;
-   typedef Byte       *voidp;
-#endif
-
-#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
-#  include <limits.h>
-#  if (UINT_MAX == 0xffffffffUL)
-#    define Z_U4 unsigned
-#  elif (ULONG_MAX == 0xffffffffUL)
-#    define Z_U4 unsigned long
-#  elif (USHRT_MAX == 0xffffffffUL)
-#    define Z_U4 unsigned short
-#  endif
-#endif
-
-#ifdef Z_U4
-   typedef Z_U4 z_crc_t;
-#else
-   typedef unsigned long z_crc_t;
-#endif
-
-#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
-#  define Z_HAVE_UNISTD_H
-#endif
-
-#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
-#  define Z_HAVE_STDARG_H
-#endif
-
-#ifdef STDC
-#  ifndef Z_SOLO
-#    include <sys/types.h>      /* for off_t */
-#  endif
-#endif
-
-#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#  ifndef Z_SOLO
-#    include <stdarg.h>         /* for va_list */
-#  endif
-#endif
-
-#ifdef _WIN32
-#  ifndef Z_SOLO
-#    include <stddef.h>         /* for wchar_t */
-#  endif
-#endif
-
-/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
- * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
- * though the former does not conform to the LFS document), but considering
- * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
- * equivalently requesting no 64-bit operations
- */
-#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
-#  undef _LARGEFILE64_SOURCE
-#endif
-
-#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
-#  define Z_HAVE_UNISTD_H
-#endif
-#ifndef Z_SOLO
-#  if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
-#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
-#    ifdef VMS
-#      include <unixio.h>       /* for off_t */
-#    endif
-#    ifndef z_off_t
-#      define z_off_t off_t
-#    endif
-#  endif
-#endif
-
-#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
-#  define Z_LFS64
-#endif
-
-#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
-#  define Z_LARGE64
-#endif
-
-#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
-#  define Z_WANT64
-#endif
-
-#if !defined(SEEK_SET) && !defined(Z_SOLO)
-#  define SEEK_SET        0       /* Seek from beginning of file.  */
-#  define SEEK_CUR        1       /* Seek from current position.  */
-#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
-#endif
-
-#ifndef z_off_t
-#  define z_off_t long
-#endif
-
-#if !defined(_WIN32) && defined(Z_LARGE64)
-#  define z_off64_t off64_t
-#else
-#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
-#    define z_off64_t __int64
-#  else
-#    define z_off64_t z_off_t
-#  endif
-#endif
-
-/* MVS linker does not support external names larger than 8 bytes */
-#if defined(__MVS__)
-  #pragma map(deflateInit_,"DEIN")
-  #pragma map(deflateInit2_,"DEIN2")
-  #pragma map(deflateEnd,"DEEND")
-  #pragma map(deflateBound,"DEBND")
-  #pragma map(inflateInit_,"ININ")
-  #pragma map(inflateInit2_,"ININ2")
-  #pragma map(inflateEnd,"INEND")
-  #pragma map(inflateSync,"INSY")
-  #pragma map(inflateSetDictionary,"INSEDI")
-  #pragma map(compressBound,"CMBND")
-  #pragma map(inflate_table,"INTABL")
-  #pragma map(inflate_fast,"INFA")
-  #pragma map(inflate_copyright,"INCOPY")
-#endif
-
-#endif /* ZCONF_H */
diff --git a/Modules/zlib/zconf.h.cmakein b/Modules/zlib/zconf.h.cmakein
deleted file mode 100644
index a7f24cc..0000000
--- a/Modules/zlib/zconf.h.cmakein
+++ /dev/null
@@ -1,536 +0,0 @@
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#ifndef ZCONF_H
-#define ZCONF_H
-#cmakedefine Z_PREFIX
-#cmakedefine Z_HAVE_UNISTD_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- * Even better than compiling with -DZ_PREFIX would be to use configure to set
- * this permanently in zconf.h using "./configure --zprefix".
- */
-#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
-#  define Z_PREFIX_SET
-
-/* all linked symbols and init macros */
-#  define _dist_code            z__dist_code
-#  define _length_code          z__length_code
-#  define _tr_align             z__tr_align
-#  define _tr_flush_bits        z__tr_flush_bits
-#  define _tr_flush_block       z__tr_flush_block
-#  define _tr_init              z__tr_init
-#  define _tr_stored_block      z__tr_stored_block
-#  define _tr_tally             z__tr_tally
-#  define adler32               z_adler32
-#  define adler32_combine       z_adler32_combine
-#  define adler32_combine64     z_adler32_combine64
-#  define adler32_z             z_adler32_z
-#  ifndef Z_SOLO
-#    define compress              z_compress
-#    define compress2             z_compress2
-#    define compressBound         z_compressBound
-#  endif
-#  define crc32                 z_crc32
-#  define crc32_combine         z_crc32_combine
-#  define crc32_combine64       z_crc32_combine64
-#  define crc32_z               z_crc32_z
-#  define deflate               z_deflate
-#  define deflateBound          z_deflateBound
-#  define deflateCopy           z_deflateCopy
-#  define deflateEnd            z_deflateEnd
-#  define deflateGetDictionary  z_deflateGetDictionary
-#  define deflateInit           z_deflateInit
-#  define deflateInit2          z_deflateInit2
-#  define deflateInit2_         z_deflateInit2_
-#  define deflateInit_          z_deflateInit_
-#  define deflateParams         z_deflateParams
-#  define deflatePending        z_deflatePending
-#  define deflatePrime          z_deflatePrime
-#  define deflateReset          z_deflateReset
-#  define deflateResetKeep      z_deflateResetKeep
-#  define deflateSetDictionary  z_deflateSetDictionary
-#  define deflateSetHeader      z_deflateSetHeader
-#  define deflateTune           z_deflateTune
-#  define deflate_copyright     z_deflate_copyright
-#  define get_crc_table         z_get_crc_table
-#  ifndef Z_SOLO
-#    define gz_error              z_gz_error
-#    define gz_intmax             z_gz_intmax
-#    define gz_strwinerror        z_gz_strwinerror
-#    define gzbuffer              z_gzbuffer
-#    define gzclearerr            z_gzclearerr
-#    define gzclose               z_gzclose
-#    define gzclose_r             z_gzclose_r
-#    define gzclose_w             z_gzclose_w
-#    define gzdirect              z_gzdirect
-#    define gzdopen               z_gzdopen
-#    define gzeof                 z_gzeof
-#    define gzerror               z_gzerror
-#    define gzflush               z_gzflush
-#    define gzfread               z_gzfread
-#    define gzfwrite              z_gzfwrite
-#    define gzgetc                z_gzgetc
-#    define gzgetc_               z_gzgetc_
-#    define gzgets                z_gzgets
-#    define gzoffset              z_gzoffset
-#    define gzoffset64            z_gzoffset64
-#    define gzopen                z_gzopen
-#    define gzopen64              z_gzopen64
-#    ifdef _WIN32
-#      define gzopen_w              z_gzopen_w
-#    endif
-#    define gzprintf              z_gzprintf
-#    define gzputc                z_gzputc
-#    define gzputs                z_gzputs
-#    define gzread                z_gzread
-#    define gzrewind              z_gzrewind
-#    define gzseek                z_gzseek
-#    define gzseek64              z_gzseek64
-#    define gzsetparams           z_gzsetparams
-#    define gztell                z_gztell
-#    define gztell64              z_gztell64
-#    define gzungetc              z_gzungetc
-#    define gzvprintf             z_gzvprintf
-#    define gzwrite               z_gzwrite
-#  endif
-#  define inflate               z_inflate
-#  define inflateBack           z_inflateBack
-#  define inflateBackEnd        z_inflateBackEnd
-#  define inflateBackInit       z_inflateBackInit
-#  define inflateBackInit_      z_inflateBackInit_
-#  define inflateCodesUsed      z_inflateCodesUsed
-#  define inflateCopy           z_inflateCopy
-#  define inflateEnd            z_inflateEnd
-#  define inflateGetDictionary  z_inflateGetDictionary
-#  define inflateGetHeader      z_inflateGetHeader
-#  define inflateInit           z_inflateInit
-#  define inflateInit2          z_inflateInit2
-#  define inflateInit2_         z_inflateInit2_
-#  define inflateInit_          z_inflateInit_
-#  define inflateMark           z_inflateMark
-#  define inflatePrime          z_inflatePrime
-#  define inflateReset          z_inflateReset
-#  define inflateReset2         z_inflateReset2
-#  define inflateResetKeep      z_inflateResetKeep
-#  define inflateSetDictionary  z_inflateSetDictionary
-#  define inflateSync           z_inflateSync
-#  define inflateSyncPoint      z_inflateSyncPoint
-#  define inflateUndermine      z_inflateUndermine
-#  define inflateValidate       z_inflateValidate
-#  define inflate_copyright     z_inflate_copyright
-#  define inflate_fast          z_inflate_fast
-#  define inflate_table         z_inflate_table
-#  ifndef Z_SOLO
-#    define uncompress            z_uncompress
-#    define uncompress2           z_uncompress2
-#  endif
-#  define zError                z_zError
-#  ifndef Z_SOLO
-#    define zcalloc               z_zcalloc
-#    define zcfree                z_zcfree
-#  endif
-#  define zlibCompileFlags      z_zlibCompileFlags
-#  define zlibVersion           z_zlibVersion
-
-/* all zlib typedefs in zlib.h and zconf.h */
-#  define Byte                  z_Byte
-#  define Bytef                 z_Bytef
-#  define alloc_func            z_alloc_func
-#  define charf                 z_charf
-#  define free_func             z_free_func
-#  ifndef Z_SOLO
-#    define gzFile                z_gzFile
-#  endif
-#  define gz_header             z_gz_header
-#  define gz_headerp            z_gz_headerp
-#  define in_func               z_in_func
-#  define intf                  z_intf
-#  define out_func              z_out_func
-#  define uInt                  z_uInt
-#  define uIntf                 z_uIntf
-#  define uLong                 z_uLong
-#  define uLongf                z_uLongf
-#  define voidp                 z_voidp
-#  define voidpc                z_voidpc
-#  define voidpf                z_voidpf
-
-/* all zlib structs in zlib.h and zconf.h */
-#  define gz_header_s           z_gz_header_s
-#  define internal_state        z_internal_state
-
-#endif
-
-#if defined(__MSDOS__) && !defined(MSDOS)
-#  define MSDOS
-#endif
-#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
-#  define OS2
-#endif
-#if defined(_WINDOWS) && !defined(WINDOWS)
-#  define WINDOWS
-#endif
-#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
-#  ifndef WIN32
-#    define WIN32
-#  endif
-#endif
-#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
-#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
-#    ifndef SYS16BIT
-#      define SYS16BIT
-#    endif
-#  endif
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#ifdef SYS16BIT
-#  define MAXSEG_64K
-#endif
-#ifdef MSDOS
-#  define UNALIGNED_OK
-#endif
-
-#ifdef __STDC_VERSION__
-#  ifndef STDC
-#    define STDC
-#  endif
-#  if __STDC_VERSION__ >= 199901L
-#    ifndef STDC99
-#      define STDC99
-#    endif
-#  endif
-#endif
-#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
-#  define STDC
-#endif
-
-#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
-#  define STDC
-#endif
-
-#ifndef STDC
-#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-#    define const       /* note: need a more gentle solution here */
-#  endif
-#endif
-
-#if defined(ZLIB_CONST) && !defined(z_const)
-#  define z_const const
-#else
-#  define z_const
-#endif
-
-#ifdef Z_SOLO
-   typedef unsigned long z_size_t;
-#else
-#  define z_longlong long long
-#  if defined(NO_SIZE_T)
-     typedef unsigned NO_SIZE_T z_size_t;
-#  elif defined(STDC)
-#    include <stddef.h>
-     typedef size_t z_size_t;
-#  else
-     typedef unsigned long z_size_t;
-#  endif
-#  undef z_longlong
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2.
- * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
- * created by gzip. (Files created by minigzip can still be extracted by
- * gzip.)
- */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            (1 << (windowBits+2)) +  (1 << (memLevel+9))
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-#ifndef Z_ARG /* function prototypes for stdarg */
-#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#    define Z_ARG(args)  args
-#  else
-#    define Z_ARG(args)  ()
-#  endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#ifdef SYS16BIT
-#  if defined(M_I86SM) || defined(M_I86MM)
-     /* MSC small or medium model */
-#    define SMALL_MEDIUM
-#    ifdef _MSC_VER
-#      define FAR _far
-#    else
-#      define FAR far
-#    endif
-#  endif
-#  if (defined(__SMALL__) || defined(__MEDIUM__))
-     /* Turbo C small or medium model */
-#    define SMALL_MEDIUM
-#    ifdef __BORLANDC__
-#      define FAR _far
-#    else
-#      define FAR far
-#    endif
-#  endif
-#endif
-
-#if defined(WINDOWS) || defined(WIN32)
-   /* If building or using zlib as a DLL, define ZLIB_DLL.
-    * This is not mandatory, but it offers a little performance increase.
-    */
-#  ifdef ZLIB_DLL
-#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
-#      ifdef ZLIB_INTERNAL
-#        define ZEXTERN extern __declspec(dllexport)
-#      else
-#        define ZEXTERN extern __declspec(dllimport)
-#      endif
-#    endif
-#  endif  /* ZLIB_DLL */
-   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
-    * define ZLIB_WINAPI.
-    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
-    */
-#  ifdef ZLIB_WINAPI
-#    ifdef FAR
-#      undef FAR
-#    endif
-#    include <windows.h>
-     /* No need for _export, use ZLIB.DEF instead. */
-     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
-#    define ZEXPORT WINAPI
-#    ifdef WIN32
-#      define ZEXPORTVA WINAPIV
-#    else
-#      define ZEXPORTVA FAR CDECL
-#    endif
-#  endif
-#endif
-
-#if defined (__BEOS__)
-#  ifdef ZLIB_DLL
-#    ifdef ZLIB_INTERNAL
-#      define ZEXPORT   __declspec(dllexport)
-#      define ZEXPORTVA __declspec(dllexport)
-#    else
-#      define ZEXPORT   __declspec(dllimport)
-#      define ZEXPORTVA __declspec(dllimport)
-#    endif
-#  endif
-#endif
-
-#ifndef ZEXTERN
-#  define ZEXTERN extern
-#endif
-#ifndef ZEXPORT
-#  define ZEXPORT
-#endif
-#ifndef ZEXPORTVA
-#  define ZEXPORTVA
-#endif
-
-#ifndef FAR
-#  define FAR
-#endif
-
-#if !defined(__MACTYPES__)
-typedef unsigned char  Byte;  /* 8 bits */
-#endif
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-#ifdef SMALL_MEDIUM
-   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
-#  define Bytef Byte FAR
-#else
-   typedef Byte  FAR Bytef;
-#endif
-typedef char  FAR charf;
-typedef int   FAR intf;
-typedef uInt  FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void const *voidpc;
-   typedef void FAR   *voidpf;
-   typedef void       *voidp;
-#else
-   typedef Byte const *voidpc;
-   typedef Byte FAR   *voidpf;
-   typedef Byte       *voidp;
-#endif
-
-#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
-#  include <limits.h>
-#  if (UINT_MAX == 0xffffffffUL)
-#    define Z_U4 unsigned
-#  elif (ULONG_MAX == 0xffffffffUL)
-#    define Z_U4 unsigned long
-#  elif (USHRT_MAX == 0xffffffffUL)
-#    define Z_U4 unsigned short
-#  endif
-#endif
-
-#ifdef Z_U4
-   typedef Z_U4 z_crc_t;
-#else
-   typedef unsigned long z_crc_t;
-#endif
-
-#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
-#  define Z_HAVE_UNISTD_H
-#endif
-
-#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
-#  define Z_HAVE_STDARG_H
-#endif
-
-#ifdef STDC
-#  ifndef Z_SOLO
-#    include <sys/types.h>      /* for off_t */
-#  endif
-#endif
-
-#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#  ifndef Z_SOLO
-#    include <stdarg.h>         /* for va_list */
-#  endif
-#endif
-
-#ifdef _WIN32
-#  ifndef Z_SOLO
-#    include <stddef.h>         /* for wchar_t */
-#  endif
-#endif
-
-/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
- * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
- * though the former does not conform to the LFS document), but considering
- * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
- * equivalently requesting no 64-bit operations
- */
-#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
-#  undef _LARGEFILE64_SOURCE
-#endif
-
-#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
-#  define Z_HAVE_UNISTD_H
-#endif
-#ifndef Z_SOLO
-#  if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
-#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
-#    ifdef VMS
-#      include <unixio.h>       /* for off_t */
-#    endif
-#    ifndef z_off_t
-#      define z_off_t off_t
-#    endif
-#  endif
-#endif
-
-#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
-#  define Z_LFS64
-#endif
-
-#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
-#  define Z_LARGE64
-#endif
-
-#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
-#  define Z_WANT64
-#endif
-
-#if !defined(SEEK_SET) && !defined(Z_SOLO)
-#  define SEEK_SET        0       /* Seek from beginning of file.  */
-#  define SEEK_CUR        1       /* Seek from current position.  */
-#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
-#endif
-
-#ifndef z_off_t
-#  define z_off_t long
-#endif
-
-#if !defined(_WIN32) && defined(Z_LARGE64)
-#  define z_off64_t off64_t
-#else
-#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
-#    define z_off64_t __int64
-#  else
-#    define z_off64_t z_off_t
-#  endif
-#endif
-
-/* MVS linker does not support external names larger than 8 bytes */
-#if defined(__MVS__)
-  #pragma map(deflateInit_,"DEIN")
-  #pragma map(deflateInit2_,"DEIN2")
-  #pragma map(deflateEnd,"DEEND")
-  #pragma map(deflateBound,"DEBND")
-  #pragma map(inflateInit_,"ININ")
-  #pragma map(inflateInit2_,"ININ2")
-  #pragma map(inflateEnd,"INEND")
-  #pragma map(inflateSync,"INSY")
-  #pragma map(inflateSetDictionary,"INSEDI")
-  #pragma map(compressBound,"CMBND")
-  #pragma map(inflate_table,"INTABL")
-  #pragma map(inflate_fast,"INFA")
-  #pragma map(inflate_copyright,"INCOPY")
-#endif
-
-#endif /* ZCONF_H */
diff --git a/Modules/zlib/zconf.h.in b/Modules/zlib/zconf.h.in
deleted file mode 100644
index 5e1d68a..0000000
--- a/Modules/zlib/zconf.h.in
+++ /dev/null
@@ -1,534 +0,0 @@
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#ifndef ZCONF_H
-#define ZCONF_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- * Even better than compiling with -DZ_PREFIX would be to use configure to set
- * this permanently in zconf.h using "./configure --zprefix".
- */
-#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
-#  define Z_PREFIX_SET
-
-/* all linked symbols and init macros */
-#  define _dist_code            z__dist_code
-#  define _length_code          z__length_code
-#  define _tr_align             z__tr_align
-#  define _tr_flush_bits        z__tr_flush_bits
-#  define _tr_flush_block       z__tr_flush_block
-#  define _tr_init              z__tr_init
-#  define _tr_stored_block      z__tr_stored_block
-#  define _tr_tally             z__tr_tally
-#  define adler32               z_adler32
-#  define adler32_combine       z_adler32_combine
-#  define adler32_combine64     z_adler32_combine64
-#  define adler32_z             z_adler32_z
-#  ifndef Z_SOLO
-#    define compress              z_compress
-#    define compress2             z_compress2
-#    define compressBound         z_compressBound
-#  endif
-#  define crc32                 z_crc32
-#  define crc32_combine         z_crc32_combine
-#  define crc32_combine64       z_crc32_combine64
-#  define crc32_z               z_crc32_z
-#  define deflate               z_deflate
-#  define deflateBound          z_deflateBound
-#  define deflateCopy           z_deflateCopy
-#  define deflateEnd            z_deflateEnd
-#  define deflateGetDictionary  z_deflateGetDictionary
-#  define deflateInit           z_deflateInit
-#  define deflateInit2          z_deflateInit2
-#  define deflateInit2_         z_deflateInit2_
-#  define deflateInit_          z_deflateInit_
-#  define deflateParams         z_deflateParams
-#  define deflatePending        z_deflatePending
-#  define deflatePrime          z_deflatePrime
-#  define deflateReset          z_deflateReset
-#  define deflateResetKeep      z_deflateResetKeep
-#  define deflateSetDictionary  z_deflateSetDictionary
-#  define deflateSetHeader      z_deflateSetHeader
-#  define deflateTune           z_deflateTune
-#  define deflate_copyright     z_deflate_copyright
-#  define get_crc_table         z_get_crc_table
-#  ifndef Z_SOLO
-#    define gz_error              z_gz_error
-#    define gz_intmax             z_gz_intmax
-#    define gz_strwinerror        z_gz_strwinerror
-#    define gzbuffer              z_gzbuffer
-#    define gzclearerr            z_gzclearerr
-#    define gzclose               z_gzclose
-#    define gzclose_r             z_gzclose_r
-#    define gzclose_w             z_gzclose_w
-#    define gzdirect              z_gzdirect
-#    define gzdopen               z_gzdopen
-#    define gzeof                 z_gzeof
-#    define gzerror               z_gzerror
-#    define gzflush               z_gzflush
-#    define gzfread               z_gzfread
-#    define gzfwrite              z_gzfwrite
-#    define gzgetc                z_gzgetc
-#    define gzgetc_               z_gzgetc_
-#    define gzgets                z_gzgets
-#    define gzoffset              z_gzoffset
-#    define gzoffset64            z_gzoffset64
-#    define gzopen                z_gzopen
-#    define gzopen64              z_gzopen64
-#    ifdef _WIN32
-#      define gzopen_w              z_gzopen_w
-#    endif
-#    define gzprintf              z_gzprintf
-#    define gzputc                z_gzputc
-#    define gzputs                z_gzputs
-#    define gzread                z_gzread
-#    define gzrewind              z_gzrewind
-#    define gzseek                z_gzseek
-#    define gzseek64              z_gzseek64
-#    define gzsetparams           z_gzsetparams
-#    define gztell                z_gztell
-#    define gztell64              z_gztell64
-#    define gzungetc              z_gzungetc
-#    define gzvprintf             z_gzvprintf
-#    define gzwrite               z_gzwrite
-#  endif
-#  define inflate               z_inflate
-#  define inflateBack           z_inflateBack
-#  define inflateBackEnd        z_inflateBackEnd
-#  define inflateBackInit       z_inflateBackInit
-#  define inflateBackInit_      z_inflateBackInit_
-#  define inflateCodesUsed      z_inflateCodesUsed
-#  define inflateCopy           z_inflateCopy
-#  define inflateEnd            z_inflateEnd
-#  define inflateGetDictionary  z_inflateGetDictionary
-#  define inflateGetHeader      z_inflateGetHeader
-#  define inflateInit           z_inflateInit
-#  define inflateInit2          z_inflateInit2
-#  define inflateInit2_         z_inflateInit2_
-#  define inflateInit_          z_inflateInit_
-#  define inflateMark           z_inflateMark
-#  define inflatePrime          z_inflatePrime
-#  define inflateReset          z_inflateReset
-#  define inflateReset2         z_inflateReset2
-#  define inflateResetKeep      z_inflateResetKeep
-#  define inflateSetDictionary  z_inflateSetDictionary
-#  define inflateSync           z_inflateSync
-#  define inflateSyncPoint      z_inflateSyncPoint
-#  define inflateUndermine      z_inflateUndermine
-#  define inflateValidate       z_inflateValidate
-#  define inflate_copyright     z_inflate_copyright
-#  define inflate_fast          z_inflate_fast
-#  define inflate_table         z_inflate_table
-#  ifndef Z_SOLO
-#    define uncompress            z_uncompress
-#    define uncompress2           z_uncompress2
-#  endif
-#  define zError                z_zError
-#  ifndef Z_SOLO
-#    define zcalloc               z_zcalloc
-#    define zcfree                z_zcfree
-#  endif
-#  define zlibCompileFlags      z_zlibCompileFlags
-#  define zlibVersion           z_zlibVersion
-
-/* all zlib typedefs in zlib.h and zconf.h */
-#  define Byte                  z_Byte
-#  define Bytef                 z_Bytef
-#  define alloc_func            z_alloc_func
-#  define charf                 z_charf
-#  define free_func             z_free_func
-#  ifndef Z_SOLO
-#    define gzFile                z_gzFile
-#  endif
-#  define gz_header             z_gz_header
-#  define gz_headerp            z_gz_headerp
-#  define in_func               z_in_func
-#  define intf                  z_intf
-#  define out_func              z_out_func
-#  define uInt                  z_uInt
-#  define uIntf                 z_uIntf
-#  define uLong                 z_uLong
-#  define uLongf                z_uLongf
-#  define voidp                 z_voidp
-#  define voidpc                z_voidpc
-#  define voidpf                z_voidpf
-
-/* all zlib structs in zlib.h and zconf.h */
-#  define gz_header_s           z_gz_header_s
-#  define internal_state        z_internal_state
-
-#endif
-
-#if defined(__MSDOS__) && !defined(MSDOS)
-#  define MSDOS
-#endif
-#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
-#  define OS2
-#endif
-#if defined(_WINDOWS) && !defined(WINDOWS)
-#  define WINDOWS
-#endif
-#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
-#  ifndef WIN32
-#    define WIN32
-#  endif
-#endif
-#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
-#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
-#    ifndef SYS16BIT
-#      define SYS16BIT
-#    endif
-#  endif
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#ifdef SYS16BIT
-#  define MAXSEG_64K
-#endif
-#ifdef MSDOS
-#  define UNALIGNED_OK
-#endif
-
-#ifdef __STDC_VERSION__
-#  ifndef STDC
-#    define STDC
-#  endif
-#  if __STDC_VERSION__ >= 199901L
-#    ifndef STDC99
-#      define STDC99
-#    endif
-#  endif
-#endif
-#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
-#  define STDC
-#endif
-#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
-#  define STDC
-#endif
-
-#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
-#  define STDC
-#endif
-
-#ifndef STDC
-#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-#    define const       /* note: need a more gentle solution here */
-#  endif
-#endif
-
-#if defined(ZLIB_CONST) && !defined(z_const)
-#  define z_const const
-#else
-#  define z_const
-#endif
-
-#ifdef Z_SOLO
-   typedef unsigned long z_size_t;
-#else
-#  define z_longlong long long
-#  if defined(NO_SIZE_T)
-     typedef unsigned NO_SIZE_T z_size_t;
-#  elif defined(STDC)
-#    include <stddef.h>
-     typedef size_t z_size_t;
-#  else
-     typedef unsigned long z_size_t;
-#  endif
-#  undef z_longlong
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2.
- * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
- * created by gzip. (Files created by minigzip can still be extracted by
- * gzip.)
- */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            (1 << (windowBits+2)) +  (1 << (memLevel+9))
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-#ifndef Z_ARG /* function prototypes for stdarg */
-#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#    define Z_ARG(args)  args
-#  else
-#    define Z_ARG(args)  ()
-#  endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#ifdef SYS16BIT
-#  if defined(M_I86SM) || defined(M_I86MM)
-     /* MSC small or medium model */
-#    define SMALL_MEDIUM
-#    ifdef _MSC_VER
-#      define FAR _far
-#    else
-#      define FAR far
-#    endif
-#  endif
-#  if (defined(__SMALL__) || defined(__MEDIUM__))
-     /* Turbo C small or medium model */
-#    define SMALL_MEDIUM
-#    ifdef __BORLANDC__
-#      define FAR _far
-#    else
-#      define FAR far
-#    endif
-#  endif
-#endif
-
-#if defined(WINDOWS) || defined(WIN32)
-   /* If building or using zlib as a DLL, define ZLIB_DLL.
-    * This is not mandatory, but it offers a little performance increase.
-    */
-#  ifdef ZLIB_DLL
-#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
-#      ifdef ZLIB_INTERNAL
-#        define ZEXTERN extern __declspec(dllexport)
-#      else
-#        define ZEXTERN extern __declspec(dllimport)
-#      endif
-#    endif
-#  endif  /* ZLIB_DLL */
-   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
-    * define ZLIB_WINAPI.
-    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
-    */
-#  ifdef ZLIB_WINAPI
-#    ifdef FAR
-#      undef FAR
-#    endif
-#    include <windows.h>
-     /* No need for _export, use ZLIB.DEF instead. */
-     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
-#    define ZEXPORT WINAPI
-#    ifdef WIN32
-#      define ZEXPORTVA WINAPIV
-#    else
-#      define ZEXPORTVA FAR CDECL
-#    endif
-#  endif
-#endif
-
-#if defined (__BEOS__)
-#  ifdef ZLIB_DLL
-#    ifdef ZLIB_INTERNAL
-#      define ZEXPORT   __declspec(dllexport)
-#      define ZEXPORTVA __declspec(dllexport)
-#    else
-#      define ZEXPORT   __declspec(dllimport)
-#      define ZEXPORTVA __declspec(dllimport)
-#    endif
-#  endif
-#endif
-
-#ifndef ZEXTERN
-#  define ZEXTERN extern
-#endif
-#ifndef ZEXPORT
-#  define ZEXPORT
-#endif
-#ifndef ZEXPORTVA
-#  define ZEXPORTVA
-#endif
-
-#ifndef FAR
-#  define FAR
-#endif
-
-#if !defined(__MACTYPES__)
-typedef unsigned char  Byte;  /* 8 bits */
-#endif
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-#ifdef SMALL_MEDIUM
-   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
-#  define Bytef Byte FAR
-#else
-   typedef Byte  FAR Bytef;
-#endif
-typedef char  FAR charf;
-typedef int   FAR intf;
-typedef uInt  FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void const *voidpc;
-   typedef void FAR   *voidpf;
-   typedef void       *voidp;
-#else
-   typedef Byte const *voidpc;
-   typedef Byte FAR   *voidpf;
-   typedef Byte       *voidp;
-#endif
-
-#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
-#  include <limits.h>
-#  if (UINT_MAX == 0xffffffffUL)
-#    define Z_U4 unsigned
-#  elif (ULONG_MAX == 0xffffffffUL)
-#    define Z_U4 unsigned long
-#  elif (USHRT_MAX == 0xffffffffUL)
-#    define Z_U4 unsigned short
-#  endif
-#endif
-
-#ifdef Z_U4
-   typedef Z_U4 z_crc_t;
-#else
-   typedef unsigned long z_crc_t;
-#endif
-
-#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
-#  define Z_HAVE_UNISTD_H
-#endif
-
-#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
-#  define Z_HAVE_STDARG_H
-#endif
-
-#ifdef STDC
-#  ifndef Z_SOLO
-#    include <sys/types.h>      /* for off_t */
-#  endif
-#endif
-
-#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#  ifndef Z_SOLO
-#    include <stdarg.h>         /* for va_list */
-#  endif
-#endif
-
-#ifdef _WIN32
-#  ifndef Z_SOLO
-#    include <stddef.h>         /* for wchar_t */
-#  endif
-#endif
-
-/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
- * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
- * though the former does not conform to the LFS document), but considering
- * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
- * equivalently requesting no 64-bit operations
- */
-#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
-#  undef _LARGEFILE64_SOURCE
-#endif
-
-#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
-#  define Z_HAVE_UNISTD_H
-#endif
-#ifndef Z_SOLO
-#  if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
-#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
-#    ifdef VMS
-#      include <unixio.h>       /* for off_t */
-#    endif
-#    ifndef z_off_t
-#      define z_off_t off_t
-#    endif
-#  endif
-#endif
-
-#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
-#  define Z_LFS64
-#endif
-
-#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
-#  define Z_LARGE64
-#endif
-
-#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
-#  define Z_WANT64
-#endif
-
-#if !defined(SEEK_SET) && !defined(Z_SOLO)
-#  define SEEK_SET        0       /* Seek from beginning of file.  */
-#  define SEEK_CUR        1       /* Seek from current position.  */
-#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
-#endif
-
-#ifndef z_off_t
-#  define z_off_t long
-#endif
-
-#if !defined(_WIN32) && defined(Z_LARGE64)
-#  define z_off64_t off64_t
-#else
-#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
-#    define z_off64_t __int64
-#  else
-#    define z_off64_t z_off_t
-#  endif
-#endif
-
-/* MVS linker does not support external names larger than 8 bytes */
-#if defined(__MVS__)
-  #pragma map(deflateInit_,"DEIN")
-  #pragma map(deflateInit2_,"DEIN2")
-  #pragma map(deflateEnd,"DEEND")
-  #pragma map(deflateBound,"DEBND")
-  #pragma map(inflateInit_,"ININ")
-  #pragma map(inflateInit2_,"ININ2")
-  #pragma map(inflateEnd,"INEND")
-  #pragma map(inflateSync,"INSY")
-  #pragma map(inflateSetDictionary,"INSEDI")
-  #pragma map(compressBound,"CMBND")
-  #pragma map(inflate_table,"INTABL")
-  #pragma map(inflate_fast,"INFA")
-  #pragma map(inflate_copyright,"INCOPY")
-#endif
-
-#endif /* ZCONF_H */
diff --git a/Modules/zlib/zlib.3 b/Modules/zlib/zlib.3
deleted file mode 100644
index bda4eb0..0000000
--- a/Modules/zlib/zlib.3
+++ /dev/null
@@ -1,149 +0,0 @@
-.TH ZLIB 3 "15 Jan 2017"
-.SH NAME
-zlib \- compression/decompression library
-.SH SYNOPSIS
-[see
-.I zlib.h
-for full description]
-.SH DESCRIPTION
-The
-.I zlib
-library is a general purpose data compression library.
-The code is thread safe, assuming that the standard library functions
-used are thread safe, such as memory allocation routines.
-It provides in-memory compression and decompression functions,
-including integrity checks of the uncompressed data.
-This version of the library supports only one compression method (deflation)
-but other algorithms may be added later
-with the same stream interface.
-.LP
-Compression can be done in a single step if the buffers are large enough
-or can be done by repeated calls of the compression function.
-In the latter case,
-the application must provide more input and/or consume the output
-(providing more output space) before each call.
-.LP
-The library also supports reading and writing files in
-.IR gzip (1)
-(.gz) format
-with an interface similar to that of stdio.
-.LP
-The library does not install any signal handler.
-The decoder checks the consistency of the compressed data,
-so the library should never crash even in the case of corrupted input.
-.LP
-All functions of the compression library are documented in the file
-.IR zlib.h .
-The distribution source includes examples of use of the library
-in the files
-.I test/example.c
-and
-.IR test/minigzip.c,
-as well as other examples in the
-.IR examples/
-directory.
-.LP
-Changes to this version are documented in the file
-.I ChangeLog
-that accompanies the source.
-.LP
-.I zlib
-is built in to many languages and operating systems, including but not limited to
-Java, Python, .NET, PHP, Perl, Ruby, Swift, and Go.
-.LP
-An experimental package to read and write files in the .zip format,
-written on top of
-.I zlib
-by Gilles Vollant (info@winimage.com),
-is available at:
-.IP
-http://www.winimage.com/zLibDll/minizip.html
-and also in the
-.I contrib/minizip
-directory of the main
-.I zlib
-source distribution.
-.SH "SEE ALSO"
-The
-.I zlib
-web site can be found at:
-.IP
-http://zlib.net/
-.LP
-The data format used by the
-.I zlib
-library is described by RFC
-(Request for Comments) 1950 to 1952 in the files:
-.IP
-http://tools.ietf.org/html/rfc1950 (for the zlib header and trailer format)
-.br
-http://tools.ietf.org/html/rfc1951 (for the deflate compressed data format)
-.br
-http://tools.ietf.org/html/rfc1952 (for the gzip header and trailer format)
-.LP
-Mark Nelson wrote an article about
-.I zlib
-for the Jan. 1997 issue of  Dr. Dobb's Journal;
-a copy of the article is available at:
-.IP
-http://marknelson.us/1997/01/01/zlib-engine/
-.SH "REPORTING PROBLEMS"
-Before reporting a problem,
-please check the
-.I zlib
-web site to verify that you have the latest version of
-.IR zlib ;
-otherwise,
-obtain the latest version and see if the problem still exists.
-Please read the
-.I zlib
-FAQ at:
-.IP
-http://zlib.net/zlib_faq.html
-.LP
-before asking for help.
-Send questions and/or comments to zlib@gzip.org,
-or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
-.SH AUTHORS AND LICENSE
-Version 1.2.11
-.LP
-Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
-.LP
-This software is provided 'as-is', without any express or implied
-warranty.  In no event will the authors be held liable for any damages
-arising from the use of this software.
-.LP
-Permission is granted to anyone to use this software for any purpose,
-including commercial applications, and to alter it and redistribute it
-freely, subject to the following restrictions:
-.LP
-.nr step 1 1
-.IP \n[step]. 3
-The origin of this software must not be misrepresented; you must not
-claim that you wrote the original software. If you use this software
-in a product, an acknowledgment in the product documentation would be
-appreciated but is not required.
-.IP \n+[step].
-Altered source versions must be plainly marked as such, and must not be
-misrepresented as being the original software.
-.IP \n+[step].
-This notice may not be removed or altered from any source distribution.
-.LP
-Jean-loup Gailly        Mark Adler
-.br
-jloup@gzip.org          madler@alumni.caltech.edu
-.LP
-The deflate format used by
-.I zlib
-was defined by Phil Katz.
-The deflate and
-.I zlib
-specifications were written by L. Peter Deutsch.
-Thanks to all the people who reported problems and suggested various
-improvements in
-.IR zlib ;
-who are too numerous to cite here.
-.LP
-UNIX manual page by R. P. C. Rodgers,
-U.S. National Library of Medicine (rodgers@nlm.nih.gov).
-.\" end of man page
diff --git a/Modules/zlib/zlib.h b/Modules/zlib/zlib.h
deleted file mode 100644
index f09cdaf..0000000
--- a/Modules/zlib/zlib.h
+++ /dev/null
@@ -1,1912 +0,0 @@
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.11, January 15th, 2017
-
-  Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  jloup@gzip.org          madler@alumni.caltech.edu
-
-
-  The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
-  (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
-*/
-
-#ifndef ZLIB_H
-#define ZLIB_H
-
-#include "zconf.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define ZLIB_VERSION "1.2.11"
-#define ZLIB_VERNUM 0x12b0
-#define ZLIB_VER_MAJOR 1
-#define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 11
-#define ZLIB_VER_SUBREVISION 0
-
-/*
-    The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed data.
-  This version of the library supports only one compression method (deflation)
-  but other algorithms will be added later and will have the same stream
-  interface.
-
-    Compression can be done in a single step if the buffers are large enough,
-  or can be done by repeated calls of the compression function.  In the latter
-  case, the application must provide more input and/or consume the output
-  (providing more output space) before each call.
-
-    The compressed data format used by default by the in-memory functions is
-  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
-  around a deflate stream, which is itself documented in RFC 1951.
-
-    The library also supports reading and writing files in gzip (.gz) format
-  with an interface similar to that of stdio using the functions that start
-  with "gz".  The gzip format is different from the zlib format.  gzip is a
-  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
-
-    This library can optionally read and write gzip and raw deflate streams in
-  memory as well.
-
-    The zlib format was designed to be compact and fast for use in memory
-  and on communications channels.  The gzip format was designed for single-
-  file compression on file systems, has a larger header than zlib to maintain
-  directory information, and uses a different, slower check method than zlib.
-
-    The library does not install any signal handler.  The decoder checks
-  the consistency of the compressed data, so the library should never crash
-  even in the case of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    z_const Bytef *next_in;     /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total number of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte will go here */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total number of bytes output so far */
-
-    z_const char *msg;  /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidpf     opaque;  /* private data object passed to zalloc and zfree */
-
-    int     data_type;  /* best guess about the data type: binary or text
-                           for deflate, or the decoding state for inflate */
-    uLong   adler;      /* Adler-32 or CRC-32 value of the uncompressed data */
-    uLong   reserved;   /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
-     gzip header information passed to and from zlib routines.  See RFC 1952
-  for more details on the meanings of these fields.
-*/
-typedef struct gz_header_s {
-    int     text;       /* true if compressed data believed to be text */
-    uLong   time;       /* modification time */
-    int     xflags;     /* extra flags (not used when writing a gzip file) */
-    int     os;         /* operating system */
-    Bytef   *extra;     /* pointer to extra field or Z_NULL if none */
-    uInt    extra_len;  /* extra field length (valid if extra != Z_NULL) */
-    uInt    extra_max;  /* space at extra (only when reading header) */
-    Bytef   *name;      /* pointer to zero-terminated file name or Z_NULL */
-    uInt    name_max;   /* space at name (only when reading header) */
-    Bytef   *comment;   /* pointer to zero-terminated comment or Z_NULL */
-    uInt    comm_max;   /* space at comment (only when reading header) */
-    int     hcrc;       /* true if there was or will be a header crc */
-    int     done;       /* true when done reading gzip header (not used
-                           when writing a gzip file) */
-} gz_header;
-
-typedef gz_header FAR *gz_headerp;
-
-/*
-     The application must update next_in and avail_in when avail_in has dropped
-   to zero.  It must update next_out and avail_out when avail_out has dropped
-   to zero.  The application must initialize zalloc, zfree and opaque before
-   calling the init function.  All other fields are set by the compression
-   library and must not be updated by the application.
-
-     The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree.  This can be useful for custom
-   memory management.  The compression library attaches no meaning to the
-   opaque value.
-
-     zalloc must return Z_NULL if there is not enough memory for the object.
-   If zlib is used in a multi-threaded application, zalloc and zfree must be
-   thread safe.  In that case, zlib is thread-safe.  When zalloc and zfree are
-   Z_NULL on entry to the initialization function, they are set to internal
-   routines that use the standard library functions malloc() and free().
-
-     On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this if
-   the symbol MAXSEG_64K is defined (see zconf.h).  WARNING: On MSDOS, pointers
-   returned by zalloc for objects of exactly 65536 bytes *must* have their
-   offset normalized to zero.  The default allocation function provided by this
-   library ensures this (see zutil.c).  To reduce memory requirements and avoid
-   any allocation of 64K objects, at the expense of compression ratio, compile
-   the library with -DMAX_WBITS=14 (see zconf.h).
-
-     The fields total_in and total_out can be used for statistics or progress
-   reports.  After compression, total_in holds the total size of the
-   uncompressed data and may be saved for use by the decompressor (particularly
-   if the decompressor wants to decompress everything in a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_SYNC_FLUSH    2
-#define Z_FULL_FLUSH    3
-#define Z_FINISH        4
-#define Z_BLOCK         5
-#define Z_TREES         6
-/* Allowed flush values; see deflate() and inflate() below for details */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_NEED_DICT     2
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative values
- * are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION         0
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_RLE                 3
-#define Z_FIXED               4
-#define Z_DEFAULT_STRATEGY    0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY   0
-#define Z_TEXT     1
-#define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
-#define Z_UNKNOWN  2
-/* Possible values of the data_type field for deflate() */
-
-#define Z_DEFLATED   8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
-
-                        /* basic functions */
-
-ZEXTERN const char * ZEXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is not
-   compatible with the zlib.h header file used by the application.  This check
-   is automatically made by deflateInit and inflateInit.
- */
-
-/*
-ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
-
-     Initializes the internal stream state for compression.  The fields
-   zalloc, zfree and opaque must be initialized before by the caller.  If
-   zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
-   allocation functions.
-
-     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
-   1 gives best speed, 9 gives best compression, 0 gives no compression at all
-   (the input data is simply copied a block at a time).  Z_DEFAULT_COMPRESSION
-   requests a default compromise between speed and compression (currently
-   equivalent to level 6).
-
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if level is not a valid compression level, or
-   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
-   with the version assumed by the caller (ZLIB_VERSION).  msg is set to null
-   if there is no error message.  deflateInit does not perform any compression:
-   this will be done by deflate().
-*/
-
-
-ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
-/*
-    deflate compresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full.  It may introduce
-  some output latency (reading input without producing any output) except when
-  forced to flush.
-
-    The detailed semantics are as follows.  deflate performs one or both of the
-  following actions:
-
-  - Compress more input starting at next_in and update next_in and avail_in
-    accordingly.  If not all input can be processed (because there is not
-    enough room in the output buffer), next_in and avail_in are updated and
-    processing will resume at this point for the next call of deflate().
-
-  - Generate more output starting at next_out and update next_out and avail_out
-    accordingly.  This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary.  Some output may be provided even if
-    flush is zero.
-
-    Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming more
-  output, and updating avail_in or avail_out accordingly; avail_out should
-  never be zero before the call.  The application can consume the compressed
-  output when it wants, for example when the output buffer is full (avail_out
-  == 0), or after each call of deflate().  If deflate returns Z_OK and with
-  zero avail_out, it must be called again after making room in the output
-  buffer because there might be more output pending. See deflatePending(),
-  which can be used if desired to determine whether or not there is more ouput
-  in that case.
-
-    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
-  decide how much data to accumulate before producing output, in order to
-  maximize compression.
-
-    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
-  flushed to the output buffer and the output is aligned on a byte boundary, so
-  that the decompressor can get all input data available so far.  (In
-  particular avail_in is zero after the call if enough output space has been
-  provided before the call.) Flushing may degrade compression for some
-  compression algorithms and so it should be used only when necessary.  This
-  completes the current deflate block and follows it with an empty stored block
-  that is three bits plus filler bits to the next byte, followed by four bytes
-  (00 00 ff ff).
-
-    If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
-  output buffer, but the output is not aligned to a byte boundary.  All of the
-  input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
-  This completes the current deflate block and follows it with an empty fixed
-  codes block that is 10 bits long.  This assures that enough bytes are output
-  in order for the decompressor to finish the block before the empty fixed
-  codes block.
-
-    If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
-  for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
-  seven bits of the current block are held to be written as the next byte after
-  the next deflate block is completed.  In this case, the decompressor may not
-  be provided enough bits at this point in order to complete decompression of
-  the data provided so far to the compressor.  It may need to wait for the next
-  block to be emitted.  This is for advanced applications that need to control
-  the emission of deflate blocks.
-
-    If flush is set to Z_FULL_FLUSH, all output is flushed as with
-  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
-  restart from this point if previous compressed data has been damaged or if
-  random access is desired.  Using Z_FULL_FLUSH too often can seriously degrade
-  compression.
-
-    If deflate returns with avail_out == 0, this function must be called again
-  with the same value of the flush parameter and more output space (updated
-  avail_out), until the flush is complete (deflate returns with non-zero
-  avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
-  avail_out is greater than six to avoid repeated flush markers due to
-  avail_out == 0 on return.
-
-    If the parameter flush is set to Z_FINISH, pending input is processed,
-  pending output is flushed and deflate returns with Z_STREAM_END if there was
-  enough output space.  If deflate returns with Z_OK or Z_BUF_ERROR, this
-  function must be called again with Z_FINISH and more output space (updated
-  avail_out) but no more input data, until it returns with Z_STREAM_END or an
-  error.  After deflate has returned Z_STREAM_END, the only possible operations
-  on the stream are deflateReset or deflateEnd.
-
-    Z_FINISH can be used in the first deflate call after deflateInit if all the
-  compression is to be done in a single step.  In order to complete in one
-  call, avail_out must be at least the value returned by deflateBound (see
-  below).  Then deflate is guaranteed to return Z_STREAM_END.  If not enough
-  output space is provided, deflate will not return Z_STREAM_END, and it must
-  be called again as described above.
-
-    deflate() sets strm->adler to the Adler-32 checksum of all input read
-  so far (that is, total_in bytes).  If a gzip stream is being generated, then
-  strm->adler will be the CRC-32 checksum of the input read so far.  (See
-  deflateInit2 below.)
-
-    deflate() may update strm->data_type if it can make a good guess about
-  the input data type (Z_BINARY or Z_TEXT).  If in doubt, the data is
-  considered binary.  This field is only for information purposes and does not
-  affect the compression algorithm in any manner.
-
-    deflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if all input has been
-  consumed and all output has been produced (only when flush is set to
-  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was Z_NULL or the state was inadvertently written over
-  by the application), or Z_BUF_ERROR if no progress is possible (for example
-  avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not fatal, and
-  deflate() can be called again with more input and more output space to
-  continue compressing.
-*/
-
-
-ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any pending
-   output.
-
-     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
-   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
-   prematurely (some input or output was discarded).  In the error case, msg
-   may be set but then points to a static string (which must not be
-   deallocated).
-*/
-
-
-/*
-ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
-
-     Initializes the internal stream state for decompression.  The fields
-   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
-   the caller.  In the current version of inflate, the provided input is not
-   read or consumed.  The allocation of a sliding window will be deferred to
-   the first call of inflate (if the decompression does not complete on the
-   first call).  If zalloc and zfree are set to Z_NULL, inflateInit updates
-   them to use default allocation functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
-   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
-   invalid, such as a null pointer to the structure.  msg is set to null if
-   there is no error message.  inflateInit does not perform any decompression.
-   Actual decompression will be done by inflate().  So next_in, and avail_in,
-   next_out, and avail_out are unused and unchanged.  The current
-   implementation of inflateInit() does not process any header information --
-   that is deferred until inflate() is called.
-*/
-
-
-ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
-/*
-    inflate decompresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full.  It may introduce
-  some output latency (reading input without producing any output) except when
-  forced to flush.
-
-  The detailed semantics are as follows.  inflate performs one or both of the
-  following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly.  If not all input can be processed (because there is not
-    enough room in the output buffer), then next_in and avail_in are updated
-    accordingly, and processing will resume at this point for the next call of
-    inflate().
-
-  - Generate more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() provides as much output as possible, until there is
-    no more input data or no more space in the output buffer (see below about
-    the flush parameter).
-
-    Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming more
-  output, and updating the next_* and avail_* values accordingly.  If the
-  caller of inflate() does not provide both available input and available
-  output space, it is possible that there will be no progress made.  The
-  application can consume the uncompressed output when it wants, for example
-  when the output buffer is full (avail_out == 0), or after each call of
-  inflate().  If inflate returns Z_OK and with zero avail_out, it must be
-  called again after making room in the output buffer because there might be
-  more output pending.
-
-    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
-  Z_BLOCK, or Z_TREES.  Z_SYNC_FLUSH requests that inflate() flush as much
-  output as possible to the output buffer.  Z_BLOCK requests that inflate()
-  stop if and when it gets to the next deflate block boundary.  When decoding
-  the zlib or gzip format, this will cause inflate() to return immediately
-  after the header and before the first block.  When doing a raw inflate,
-  inflate() will go ahead and process the first block, and will return when it
-  gets to the end of that block, or when it runs out of data.
-
-    The Z_BLOCK option assists in appending to or combining deflate streams.
-  To assist in this, on return inflate() always sets strm->data_type to the
-  number of unused bits in the last byte taken from strm->next_in, plus 64 if
-  inflate() is currently decoding the last block in the deflate stream, plus
-  128 if inflate() returned immediately after decoding an end-of-block code or
-  decoding the complete header up to just before the first byte of the deflate
-  stream.  The end-of-block will not be indicated until all of the uncompressed
-  data from that block has been written to strm->next_out.  The number of
-  unused bits may in general be greater than seven, except when bit 7 of
-  data_type is set, in which case the number of unused bits will be less than
-  eight.  data_type is set as noted here every time inflate() returns for all
-  flush options, and so can be used to determine the amount of currently
-  consumed input in bits.
-
-    The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
-  end of each deflate block header is reached, before any actual data in that
-  block is decoded.  This allows the caller to determine the length of the
-  deflate block header for later use in random access within a deflate block.
-  256 is added to the value of strm->data_type when inflate() returns
-  immediately after reaching the end of the deflate block header.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error.  However if all decompression is to be performed in a single step (a
-  single call of inflate), the parameter flush should be set to Z_FINISH.  In
-  this case all pending input is processed and all pending output is flushed;
-  avail_out must be large enough to hold all of the uncompressed data for the
-  operation to complete.  (The size of the uncompressed data may have been
-  saved by the compressor for this purpose.)  The use of Z_FINISH is not
-  required to perform an inflation in one step.  However it may be used to
-  inform inflate that a faster approach can be used for the single inflate()
-  call.  Z_FINISH also informs inflate to not maintain a sliding window if the
-  stream completes, which reduces inflate's memory footprint.  If the stream
-  does not complete, either because not all of the stream is provided or not
-  enough output space is provided, then a sliding window will be allocated and
-  inflate() can be called again to continue the operation as if Z_NO_FLUSH had
-  been used.
-
-     In this implementation, inflate() always flushes as much output as
-  possible to the output buffer, and always uses the faster approach on the
-  first call.  So the effects of the flush parameter in this implementation are
-  on the return value of inflate() as noted below, when inflate() returns early
-  when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
-  memory for a sliding window when Z_FINISH is used.
-
-     If a preset dictionary is needed after this call (see inflateSetDictionary
-  below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
-  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
-  strm->adler to the Adler-32 checksum of all output produced so far (that is,
-  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
-  below.  At the end of the stream, inflate() checks that its computed Adler-32
-  checksum is equal to that saved by the compressor and returns Z_STREAM_END
-  only if the checksum is correct.
-
-    inflate() can decompress and check either zlib-wrapped or gzip-wrapped
-  deflate data.  The header type is detected automatically, if requested when
-  initializing with inflateInit2().  Any information contained in the gzip
-  header is not retained unless inflateGetHeader() is used.  When processing
-  gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
-  produced so far.  The CRC-32 is checked against the gzip trailer, as is the
-  uncompressed length, modulo 2^32.
-
-    inflate() returns Z_OK if some progress has been made (more input processed
-  or more output produced), Z_STREAM_END if the end of the compressed data has
-  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
-  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
-  corrupted (input stream not conforming to the zlib format or incorrect check
-  value, in which case strm->msg points to a string with a more specific
-  error), Z_STREAM_ERROR if the stream structure was inconsistent (for example
-  next_in or next_out was Z_NULL, or the state was inadvertently written over
-  by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR
-  if no progress was possible or if there was not enough room in the output
-  buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
-  inflate() can be called again with more input and more output space to
-  continue decompressing.  If Z_DATA_ERROR is returned, the application may
-  then call inflateSync() to look for a good compression block if a partial
-  recovery of the data is to be attempted.
-*/
-
-
-ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any pending
-   output.
-
-     inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state
-   was inconsistent.
-*/
-
-
-                        /* Advanced functions */
-
-/*
-    The following functions are needed only in some special applications.
-*/
-
-/*
-ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
-                                     int  level,
-                                     int  method,
-                                     int  windowBits,
-                                     int  memLevel,
-                                     int  strategy));
-
-     This is another version of deflateInit with more compression options.  The
-   fields next_in, zalloc, zfree and opaque must be initialized before by the
-   caller.
-
-     The method parameter is the compression method.  It must be Z_DEFLATED in
-   this version of the library.
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library.  Larger values of this parameter result in better
-   compression at the expense of memory usage.  The default value is 15 if
-   deflateInit is used instead.
-
-     For the current implementation of deflate(), a windowBits value of 8 (a
-   window size of 256 bytes) is not supported.  As a result, a request for 8
-   will result in 9 (a 512-byte window).  In that case, providing 8 to
-   inflateInit2() will result in an error when the zlib header with 9 is
-   checked against the initialization of inflate().  The remedy is to not use 8
-   with deflateInit2() with this initialization, or at least in that case use 9
-   with inflateInit2().
-
-     windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
-   determines the window size.  deflate() will then generate raw deflate data
-   with no zlib header or trailer, and will not compute a check value.
-
-     windowBits can also be greater than 15 for optional gzip encoding.  Add
-   16 to windowBits to write a simple gzip header and trailer around the
-   compressed data instead of a zlib wrapper.  The gzip header will have no
-   file name, no extra data, no comment, no modification time (set to zero), no
-   header crc, and the operating system will be set to the appropriate value,
-   if the operating system was determined at compile time.  If a gzip stream is
-   being written, strm->adler is a CRC-32 instead of an Adler-32.
-
-     For raw deflate or gzip encoding, a request for a 256-byte window is
-   rejected as invalid, since only the zlib header provides a means of
-   transmitting the window size to the decompressor.
-
-     The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state.  memLevel=1 uses minimum memory but is
-   slow and reduces compression ratio; memLevel=9 uses maximum memory for
-   optimal speed.  The default value is 8.  See zconf.h for total memory usage
-   as a function of windowBits and memLevel.
-
-     The strategy parameter is used to tune the compression algorithm.  Use the
-   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
-   filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
-   string match), or Z_RLE to limit match distances to one (run-length
-   encoding).  Filtered data consists mostly of small values with a somewhat
-   random distribution.  In this case, the compression algorithm is tuned to
-   compress them better.  The effect of Z_FILTERED is to force more Huffman
-   coding and less string matching; it is somewhat intermediate between
-   Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY.  Z_RLE is designed to be almost as
-   fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data.  The
-   strategy parameter only affects the compression ratio but not the
-   correctness of the compressed output even if it is not set appropriately.
-   Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
-   decoder for special applications.
-
-     deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
-   method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
-   incompatible with the version assumed by the caller (ZLIB_VERSION).  msg is
-   set to null if there is no error message.  deflateInit2 does not perform any
-   compression: this will be done by deflate().
-*/
-
-ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
-                                             const Bytef *dictionary,
-                                             uInt  dictLength));
-/*
-     Initializes the compression dictionary from the given byte sequence
-   without producing any compressed output.  When using the zlib format, this
-   function must be called immediately after deflateInit, deflateInit2 or
-   deflateReset, and before any call of deflate.  When doing raw deflate, this
-   function must be called either before any call of deflate, or immediately
-   after the completion of a deflate block, i.e. after all input has been
-   consumed and all output has been delivered when using any of the flush
-   options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH.  The
-   compressor and decompressor must use exactly the same dictionary (see
-   inflateSetDictionary).
-
-     The dictionary should consist of strings (byte sequences) that are likely
-   to be encountered later in the data to be compressed, with the most commonly
-   used strings preferably put towards the end of the dictionary.  Using a
-   dictionary is most useful when the data to be compressed is short and can be
-   predicted with good accuracy; the data can then be compressed better than
-   with the default empty dictionary.
-
-     Depending on the size of the compression data structures selected by
-   deflateInit or deflateInit2, a part of the dictionary may in effect be
-   discarded, for example if the dictionary is larger than the window size
-   provided in deflateInit or deflateInit2.  Thus the strings most likely to be
-   useful should be put at the end of the dictionary, not at the front.  In
-   addition, the current implementation of deflate will use at most the window
-   size minus 262 bytes of the provided dictionary.
-
-     Upon return of this function, strm->adler is set to the Adler-32 value
-   of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor.  (The Adler-32 value
-   applies to the whole dictionary even if only a subset of the dictionary is
-   actually used by the compressor.) If a raw deflate was requested, then the
-   Adler-32 value is not computed and strm->adler is not set.
-
-     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
-   inconsistent (for example if deflate has already been called for this stream
-   or if not at a block boundary for raw deflate).  deflateSetDictionary does
-   not perform any compression: this will be done by deflate().
-*/
-
-ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
-                                             Bytef *dictionary,
-                                             uInt  *dictLength));
-/*
-     Returns the sliding dictionary being maintained by deflate.  dictLength is
-   set to the number of bytes in the dictionary, and that many bytes are copied
-   to dictionary.  dictionary must have enough space, where 32768 bytes is
-   always enough.  If deflateGetDictionary() is called with dictionary equal to
-   Z_NULL, then only the dictionary length is returned, and nothing is copied.
-   Similary, if dictLength is Z_NULL, then it is not set.
-
-     deflateGetDictionary() may return a length less than the window size, even
-   when more than the window size in input has been provided. It may return up
-   to 258 bytes less in that case, due to how zlib's implementation of deflate
-   manages the sliding window and lookahead for matches, where matches can be
-   up to 258 bytes long. If the application needs the last window-size bytes of
-   input, then that would need to be saved by the application outside of zlib.
-
-     deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
-   stream state is inconsistent.
-*/
-
-ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
-                                    z_streamp source));
-/*
-     Sets the destination stream as a complete copy of the source stream.
-
-     This function can be useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter.  The streams that will be discarded should then be freed
-   by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and can
-   consume lots of memory.
-
-     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
-   destination.
-*/
-
-ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to deflateEnd followed by deflateInit, but
-   does not free and reallocate the internal compression state.  The stream
-   will leave the compression level and any other attributes that may have been
-   set unchanged.
-
-     deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being Z_NULL).
-*/
-
-ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
-                                      int level,
-                                      int strategy));
-/*
-     Dynamically update the compression level and compression strategy.  The
-   interpretation of level and strategy is as in deflateInit2().  This can be
-   used to switch between compression and straight copy of the input data, or
-   to switch to a different kind of input data requiring a different strategy.
-   If the compression approach (which is a function of the level) or the
-   strategy is changed, and if any input has been consumed in a previous
-   deflate() call, then the input available so far is compressed with the old
-   level and strategy using deflate(strm, Z_BLOCK).  There are three approaches
-   for the compression levels 0, 1..3, and 4..9 respectively.  The new level
-   and strategy will take effect at the next call of deflate().
-
-     If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
-   not have enough output space to complete, then the parameter change will not
-   take effect.  In this case, deflateParams() can be called again with the
-   same parameters and more output space to try again.
-
-     In order to assure a change in the parameters on the first try, the
-   deflate stream should be flushed using deflate() with Z_BLOCK or other flush
-   request until strm.avail_out is not zero, before calling deflateParams().
-   Then no more input data should be provided before the deflateParams() call.
-   If this is done, the old level and strategy will be applied to the data
-   compressed before deflateParams(), and the new level and strategy will be
-   applied to the the data compressed after deflateParams().
-
-     deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream
-   state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if
-   there was not enough output space to complete the compression of the
-   available input data before a change in the strategy or approach.  Note that
-   in the case of a Z_BUF_ERROR, the parameters are not changed.  A return
-   value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be
-   retried with more output space.
-*/
-
-ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
-                                    int good_length,
-                                    int max_lazy,
-                                    int nice_length,
-                                    int max_chain));
-/*
-     Fine tune deflate's internal compression parameters.  This should only be
-   used by someone who understands the algorithm used by zlib's deflate for
-   searching for the best matching string, and even then only by the most
-   fanatic optimizer trying to squeeze out the last compressed bit for their
-   specific input data.  Read the deflate.c source code for the meaning of the
-   max_lazy, good_length, nice_length, and max_chain parameters.
-
-     deflateTune() can be called after deflateInit() or deflateInit2(), and
-   returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
- */
-
-ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
-                                       uLong sourceLen));
-/*
-     deflateBound() returns an upper bound on the compressed size after
-   deflation of sourceLen bytes.  It must be called after deflateInit() or
-   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
-   to allocate an output buffer for deflation in a single pass, and so would be
-   called before deflate().  If that first deflate() call is provided the
-   sourceLen input bytes, an output buffer allocated to the size returned by
-   deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
-   to return Z_STREAM_END.  Note that it is possible for the compressed size to
-   be larger than the value returned by deflateBound() if flush options other
-   than Z_FINISH or Z_NO_FLUSH are used.
-*/
-
-ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
-                                       unsigned *pending,
-                                       int *bits));
-/*
-     deflatePending() returns the number of bytes and bits of output that have
-   been generated, but not yet provided in the available output.  The bytes not
-   provided would be due to the available output space having being consumed.
-   The number of bits of output not provided are between 0 and 7, where they
-   await more bits to join them in order to fill out a full byte.  If pending
-   or bits are Z_NULL, then those values are not set.
-
-     deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent.
- */
-
-ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
-                                     int bits,
-                                     int value));
-/*
-     deflatePrime() inserts bits in the deflate output stream.  The intent
-   is that this function is used to start off the deflate output with the bits
-   leftover from a previous deflate stream when appending to it.  As such, this
-   function can only be used for raw deflate, and must be used before the first
-   deflate() call after a deflateInit2() or deflateReset().  bits must be less
-   than or equal to 16, and that many of the least significant bits of value
-   will be inserted in the output.
-
-     deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
-   room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
-   source stream state was inconsistent.
-*/
-
-ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
-                                         gz_headerp head));
-/*
-     deflateSetHeader() provides gzip header information for when a gzip
-   stream is requested by deflateInit2().  deflateSetHeader() may be called
-   after deflateInit2() or deflateReset() and before the first call of
-   deflate().  The text, time, os, extra field, name, and comment information
-   in the provided gz_header structure are written to the gzip header (xflag is
-   ignored -- the extra flags are set according to the compression level).  The
-   caller must assure that, if not Z_NULL, name and comment are terminated with
-   a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
-   available there.  If hcrc is true, a gzip header crc is included.  Note that
-   the current versions of the command-line version of gzip (up through version
-   1.3.x) do not support header crc's, and will report that it is a "multi-part
-   gzip file" and give up.
-
-     If deflateSetHeader is not used, the default gzip header has text false,
-   the time set to zero, and os set to 255, with no extra, name, or comment
-   fields.  The gzip header is returned to the default state by deflateReset().
-
-     deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent.
-*/
-
-/*
-ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
-                                     int  windowBits));
-
-     This is another version of inflateInit with an extra parameter.  The
-   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
-   before by the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library.  The default value is 15 if inflateInit is used
-   instead.  windowBits must be greater than or equal to the windowBits value
-   provided to deflateInit2() while compressing, or it must be equal to 15 if
-   deflateInit2() was not used.  If a compressed stream with a larger window
-   size is given as input, inflate() will return with the error code
-   Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     windowBits can also be zero to request that inflate use the window size in
-   the zlib header of the compressed stream.
-
-     windowBits can also be -8..-15 for raw inflate.  In this case, -windowBits
-   determines the window size.  inflate() will then process raw deflate data,
-   not looking for a zlib or gzip header, not generating a check value, and not
-   looking for any check values for comparison at the end of the stream.  This
-   is for use with other formats that use the deflate compressed data format
-   such as zip.  Those formats provide their own check values.  If a custom
-   format is developed using the raw deflate format for compressed data, it is
-   recommended that a check value such as an Adler-32 or a CRC-32 be applied to
-   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
-   most applications, the zlib format should be used as is.  Note that comments
-   above on the use in deflateInit2() applies to the magnitude of windowBits.
-
-     windowBits can also be greater than 15 for optional gzip decoding.  Add
-   32 to windowBits to enable zlib and gzip decoding with automatic header
-   detection, or add 16 to decode only the gzip format (the zlib format will
-   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
-   CRC-32 instead of an Adler-32.  Unlike the gunzip utility and gzread() (see
-   below), inflate() will not automatically decode concatenated gzip streams.
-   inflate() will return Z_STREAM_END at the end of the gzip stream.  The state
-   would need to be reset to continue decoding a subsequent gzip stream.
-
-     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
-   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
-   invalid, such as a null pointer to the structure.  msg is set to null if
-   there is no error message.  inflateInit2 does not perform any decompression
-   apart from possibly reading the zlib header if present: actual decompression
-   will be done by inflate().  (So next_in and avail_in may be modified, but
-   next_out and avail_out are unused and unchanged.) The current implementation
-   of inflateInit2() does not process any header information -- that is
-   deferred until inflate() is called.
-*/
-
-ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
-                                             const Bytef *dictionary,
-                                             uInt  dictLength));
-/*
-     Initializes the decompression dictionary from the given uncompressed byte
-   sequence.  This function must be called immediately after a call of inflate,
-   if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
-   can be determined from the Adler-32 value returned by that call of inflate.
-   The compressor and decompressor must use exactly the same dictionary (see
-   deflateSetDictionary).  For raw inflate, this function can be called at any
-   time to set the dictionary.  If the provided dictionary is smaller than the
-   window and there is already data in the window, then the provided dictionary
-   will amend what's there.  The application must insure that the dictionary
-   that was used for compression is provided.
-
-     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
-   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
-   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect Adler-32 value).  inflateSetDictionary does not
-   perform any decompression: this will be done by subsequent calls of
-   inflate().
-*/
-
-ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
-                                             Bytef *dictionary,
-                                             uInt  *dictLength));
-/*
-     Returns the sliding dictionary being maintained by inflate.  dictLength is
-   set to the number of bytes in the dictionary, and that many bytes are copied
-   to dictionary.  dictionary must have enough space, where 32768 bytes is
-   always enough.  If inflateGetDictionary() is called with dictionary equal to
-   Z_NULL, then only the dictionary length is returned, and nothing is copied.
-   Similary, if dictLength is Z_NULL, then it is not set.
-
-     inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
-   stream state is inconsistent.
-*/
-
-ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
-/*
-     Skips invalid compressed data until a possible full flush point (see above
-   for the description of deflate with Z_FULL_FLUSH) can be found, or until all
-   available input is skipped.  No output is provided.
-
-     inflateSync searches for a 00 00 FF FF pattern in the compressed data.
-   All full flush points have this pattern, but not all occurrences of this
-   pattern are full flush points.
-
-     inflateSync returns Z_OK if a possible full flush point has been found,
-   Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
-   has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
-   In the success case, the application may save the current current value of
-   total_in which indicates where valid compressed data was found.  In the
-   error case, the application may repeatedly call inflateSync, providing more
-   input each time, until success or end of the input data.
-*/
-
-ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
-                                    z_streamp source));
-/*
-     Sets the destination stream as a complete copy of the source stream.
-
-     This function can be useful when randomly accessing a large stream.  The
-   first pass through the stream can periodically record the inflate state,
-   allowing restarting inflate at those points when randomly accessing the
-   stream.
-
-     inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
-   destination.
-*/
-
-ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate the internal decompression state.  The
-   stream will keep attributes that may have been set by inflateInit2.
-
-     inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being Z_NULL).
-*/
-
-ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
-                                      int windowBits));
-/*
-     This function is the same as inflateReset, but it also permits changing
-   the wrap and window size requests.  The windowBits parameter is interpreted
-   the same as it is for inflateInit2.  If the window size is changed, then the
-   memory allocated for the window is freed, and the window will be reallocated
-   by inflate() if needed.
-
-     inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being Z_NULL), or if
-   the windowBits parameter is invalid.
-*/
-
-ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
-                                     int bits,
-                                     int value));
-/*
-     This function inserts bits in the inflate input stream.  The intent is
-   that this function is used to start inflating at a bit position in the
-   middle of a byte.  The provided bits will be used before any bytes are used
-   from next_in.  This function should only be used with raw inflate, and
-   should be used before the first inflate() call after inflateInit2() or
-   inflateReset().  bits must be less than or equal to 16, and that many of the
-   least significant bits of value will be inserted in the input.
-
-     If bits is negative, then the input stream bit buffer is emptied.  Then
-   inflatePrime() can be called again to put bits in the buffer.  This is used
-   to clear out bits leftover after feeding inflate a block description prior
-   to feeding inflate codes.
-
-     inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent.
-*/
-
-ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
-/*
-     This function returns two values, one in the lower 16 bits of the return
-   value, and the other in the remaining upper bits, obtained by shifting the
-   return value down 16 bits.  If the upper value is -1 and the lower value is
-   zero, then inflate() is currently decoding information outside of a block.
-   If the upper value is -1 and the lower value is non-zero, then inflate is in
-   the middle of a stored block, with the lower value equaling the number of
-   bytes from the input remaining to copy.  If the upper value is not -1, then
-   it is the number of bits back from the current bit position in the input of
-   the code (literal or length/distance pair) currently being processed.  In
-   that case the lower value is the number of bytes already emitted for that
-   code.
-
-     A code is being processed if inflate is waiting for more input to complete
-   decoding of the code, or if it has completed decoding but is waiting for
-   more output space to write the literal or match data.
-
-     inflateMark() is used to mark locations in the input data for random
-   access, which may be at bit positions, and to note those cases where the
-   output of a code may span boundaries of random access blocks.  The current
-   location in the input stream can be determined from avail_in and data_type
-   as noted in the description for the Z_BLOCK flush parameter for inflate.
-
-     inflateMark returns the value noted above, or -65536 if the provided
-   source stream state was inconsistent.
-*/
-
-ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
-                                         gz_headerp head));
-/*
-     inflateGetHeader() requests that gzip header information be stored in the
-   provided gz_header structure.  inflateGetHeader() may be called after
-   inflateInit2() or inflateReset(), and before the first call of inflate().
-   As inflate() processes the gzip stream, head->done is zero until the header
-   is completed, at which time head->done is set to one.  If a zlib stream is
-   being decoded, then head->done is set to -1 to indicate that there will be
-   no gzip header information forthcoming.  Note that Z_BLOCK or Z_TREES can be
-   used to force inflate() to return immediately after header processing is
-   complete and before any actual data is decompressed.
-
-     The text, time, xflags, and os fields are filled in with the gzip header
-   contents.  hcrc is set to true if there is a header CRC.  (The header CRC
-   was valid if done is set to one.) If extra is not Z_NULL, then extra_max
-   contains the maximum number of bytes to write to extra.  Once done is true,
-   extra_len contains the actual extra field length, and extra contains the
-   extra field, or that field truncated if extra_max is less than extra_len.
-   If name is not Z_NULL, then up to name_max characters are written there,
-   terminated with a zero unless the length is greater than name_max.  If
-   comment is not Z_NULL, then up to comm_max characters are written there,
-   terminated with a zero unless the length is greater than comm_max.  When any
-   of extra, name, or comment are not Z_NULL and the respective field is not
-   present in the header, then that field is set to Z_NULL to signal its
-   absence.  This allows the use of deflateSetHeader() with the returned
-   structure to duplicate the header.  However if those fields are set to
-   allocated memory, then the application will need to save those pointers
-   elsewhere so that they can be eventually freed.
-
-     If inflateGetHeader is not used, then the header information is simply
-   discarded.  The header is always checked for validity, including the header
-   CRC if present.  inflateReset() will reset the process to discard the header
-   information.  The application would need to call inflateGetHeader() again to
-   retrieve the header from the next gzip stream.
-
-     inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent.
-*/
-
-/*
-ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
-                                        unsigned char FAR *window));
-
-     Initialize the internal stream state for decompression using inflateBack()
-   calls.  The fields zalloc, zfree and opaque in strm must be initialized
-   before the call.  If zalloc and zfree are Z_NULL, then the default library-
-   derived memory allocation routines are used.  windowBits is the base two
-   logarithm of the window size, in the range 8..15.  window is a caller
-   supplied buffer of that size.  Except for special applications where it is
-   assured that deflate was used with small window sizes, windowBits must be 15
-   and a 32K byte window must be supplied to be able to decompress general
-   deflate streams.
-
-     See inflateBack() for the usage of these routines.
-
-     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
-   the parameters are invalid, Z_MEM_ERROR if the internal state could not be
-   allocated, or Z_VERSION_ERROR if the version of the library does not match
-   the version of the header file.
-*/
-
-typedef unsigned (*in_func) OF((void FAR *,
-                                z_const unsigned char FAR * FAR *));
-typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
-
-ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
-                                    in_func in, void FAR *in_desc,
-                                    out_func out, void FAR *out_desc));
-/*
-     inflateBack() does a raw inflate with a single call using a call-back
-   interface for input and output.  This is potentially more efficient than
-   inflate() for file i/o applications, in that it avoids copying between the
-   output and the sliding window by simply making the window itself the output
-   buffer.  inflate() can be faster on modern CPUs when used with large
-   buffers.  inflateBack() trusts the application to not change the output
-   buffer passed by the output function, at least until inflateBack() returns.
-
-     inflateBackInit() must be called first to allocate the internal state
-   and to initialize the state with the user-provided window buffer.
-   inflateBack() may then be used multiple times to inflate a complete, raw
-   deflate stream with each call.  inflateBackEnd() is then called to free the
-   allocated state.
-
-     A raw deflate stream is one with no zlib or gzip header or trailer.
-   This routine would normally be used in a utility that reads zip or gzip
-   files and writes out uncompressed files.  The utility would decode the
-   header and process the trailer on its own, hence this routine expects only
-   the raw deflate stream to decompress.  This is different from the default
-   behavior of inflate(), which expects a zlib header and trailer around the
-   deflate stream.
-
-     inflateBack() uses two subroutines supplied by the caller that are then
-   called by inflateBack() for input and output.  inflateBack() calls those
-   routines until it reads a complete deflate stream and writes out all of the
-   uncompressed data, or until it encounters an error.  The function's
-   parameters and return types are defined above in the in_func and out_func
-   typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
-   number of bytes of provided input, and a pointer to that input in buf.  If
-   there is no input available, in() must return zero -- buf is ignored in that
-   case -- and inflateBack() will return a buffer error.  inflateBack() will
-   call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].
-   out() should return zero on success, or non-zero on failure.  If out()
-   returns non-zero, inflateBack() will return with an error.  Neither in() nor
-   out() are permitted to change the contents of the window provided to
-   inflateBackInit(), which is also the buffer that out() uses to write from.
-   The length written by out() will be at most the window size.  Any non-zero
-   amount of input may be provided by in().
-
-     For convenience, inflateBack() can be provided input on the first call by
-   setting strm->next_in and strm->avail_in.  If that input is exhausted, then
-   in() will be called.  Therefore strm->next_in must be initialized before
-   calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
-   immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
-   must also be initialized, and then if strm->avail_in is not zero, input will
-   initially be taken from strm->next_in[0 ..  strm->avail_in - 1].
-
-     The in_desc and out_desc parameters of inflateBack() is passed as the
-   first parameter of in() and out() respectively when they are called.  These
-   descriptors can be optionally used to pass any information that the caller-
-   supplied in() and out() functions need to do their job.
-
-     On return, inflateBack() will set strm->next_in and strm->avail_in to
-   pass back any unused input that was provided by the last in() call.  The
-   return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
-   if in() or out() returned an error, Z_DATA_ERROR if there was a format error
-   in the deflate stream (in which case strm->msg is set to indicate the nature
-   of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
-   In the case of Z_BUF_ERROR, an input or output error can be distinguished
-   using strm->next_in which will be Z_NULL only if in() returned an error.  If
-   strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
-   non-zero.  (in() will always be called before out(), so strm->next_in is
-   assured to be defined if out() returns non-zero.)  Note that inflateBack()
-   cannot return Z_OK.
-*/
-
-ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
-/*
-     All memory allocated by inflateBackInit() is freed.
-
-     inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
-   state was inconsistent.
-*/
-
-ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
-/* Return flags indicating compile-time options.
-
-    Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
-     1.0: size of uInt
-     3.2: size of uLong
-     5.4: size of voidpf (pointer)
-     7.6: size of z_off_t
-
-    Compiler, assembler, and debug options:
-     8: ZLIB_DEBUG
-     9: ASMV or ASMINF -- use ASM code
-     10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
-     11: 0 (reserved)
-
-    One-time table building (smaller code, but not thread-safe if true):
-     12: BUILDFIXED -- build static block decoding tables when needed
-     13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
-     14,15: 0 (reserved)
-
-    Library content (indicates missing functionality):
-     16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
-                          deflate code when not needed)
-     17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
-                    and decode gzip streams (to avoid linking crc code)
-     18-19: 0 (reserved)
-
-    Operation variations (changes in library functionality):
-     20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
-     21: FASTEST -- deflate algorithm with only one, lowest compression level
-     22,23: 0 (reserved)
-
-    The sprintf variant used by gzprintf (zero is best):
-     24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
-     25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
-     26: 0 = returns value, 1 = void -- 1 means inferred string length returned
-
-    Remainder:
-     27-31: 0 (reserved)
- */
-
-#ifndef Z_SOLO
-
-                        /* utility functions */
-
-/*
-     The following utility functions are implemented on top of the basic
-   stream-oriented functions.  To simplify the interface, some default options
-   are assumed (compression level and memory usage, standard memory allocation
-   functions).  The source code of these utility functions can be modified if
-   you need special options.
-*/
-
-ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
-                                 const Bytef *source, uLong sourceLen));
-/*
-     Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer.  Upon entry, destLen is the total size
-   of the destination buffer, which must be at least the value returned by
-   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
-   compressed data.  compress() is equivalent to compress2() with a level
-   parameter of Z_DEFAULT_COMPRESSION.
-
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer.
-*/
-
-ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
-                                  const Bytef *source, uLong sourceLen,
-                                  int level));
-/*
-     Compresses the source buffer into the destination buffer.  The level
-   parameter has the same meaning as in deflateInit.  sourceLen is the byte
-   length of the source buffer.  Upon entry, destLen is the total size of the
-   destination buffer, which must be at least the value returned by
-   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
-   compressed data.
-
-     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
-   Z_STREAM_ERROR if the level parameter is invalid.
-*/
-
-ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
-/*
-     compressBound() returns an upper bound on the compressed size after
-   compress() or compress2() on sourceLen bytes.  It would be used before a
-   compress() or compress2() call to allocate the destination buffer.
-*/
-
-ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
-                                   const Bytef *source, uLong sourceLen));
-/*
-     Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer.  Upon entry, destLen is the total size
-   of the destination buffer, which must be large enough to hold the entire
-   uncompressed data.  (The size of the uncompressed data must have been saved
-   previously by the compressor and transmitted to the decompressor by some
-   mechanism outside the scope of this compression library.) Upon exit, destLen
-   is the actual size of the uncompressed data.
-
-     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.  In
-   the case where there is not enough room, uncompress() will fill the output
-   buffer with the uncompressed data up to that point.
-*/
-
-ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest,   uLongf *destLen,
-                                    const Bytef *source, uLong *sourceLen));
-/*
-     Same as uncompress, except that sourceLen is a pointer, where the
-   length of the source is *sourceLen.  On return, *sourceLen is the number of
-   source bytes consumed.
-*/
-
-                        /* gzip file access functions */
-
-/*
-     This library supports reading and writing files in gzip (.gz) format with
-   an interface similar to that of stdio, using the functions that start with
-   "gz".  The gzip format is different from the zlib format.  gzip is a gzip
-   wrapper, documented in RFC 1952, wrapped around a deflate stream.
-*/
-
-typedef struct gzFile_s *gzFile;    /* semi-opaque gzip file descriptor */
-
-/*
-ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
-
-     Opens a gzip (.gz) file for reading or writing.  The mode parameter is as
-   in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
-   a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
-   compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
-   for fixed code compression as in "wb9F".  (See the description of
-   deflateInit2 for more information about the strategy parameter.)  'T' will
-   request transparent writing or appending with no compression and not using
-   the gzip format.
-
-     "a" can be used instead of "w" to request that the gzip stream that will
-   be written be appended to the file.  "+" will result in an error, since
-   reading and writing to the same gzip file is not supported.  The addition of
-   "x" when writing will create the file exclusively, which fails if the file
-   already exists.  On systems that support it, the addition of "e" when
-   reading or writing will set the flag to close the file on an execve() call.
-
-     These functions, as well as gzip, will read and decode a sequence of gzip
-   streams in a file.  The append function of gzopen() can be used to create
-   such a file.  (Also see gzflush() for another way to do this.)  When
-   appending, gzopen does not test whether the file begins with a gzip stream,
-   nor does it look for the end of the gzip streams to begin appending.  gzopen
-   will simply append a gzip stream to the existing file.
-
-     gzopen can be used to read a file which is not in gzip format; in this
-   case gzread will directly read from the file without decompression.  When
-   reading, this will be detected automatically by looking for the magic two-
-   byte gzip header.
-
-     gzopen returns NULL if the file could not be opened, if there was
-   insufficient memory to allocate the gzFile state, or if an invalid mode was
-   specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
-   errno can be checked to determine if the reason gzopen failed was that the
-   file could not be opened.
-*/
-
-ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
-/*
-     gzdopen associates a gzFile with the file descriptor fd.  File descriptors
-   are obtained from calls like open, dup, creat, pipe or fileno (if the file
-   has been previously opened with fopen).  The mode parameter is as in gzopen.
-
-     The next call of gzclose on the returned gzFile will also close the file
-   descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
-   fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
-   mode);.  The duplicated descriptor should be saved to avoid a leak, since
-   gzdopen does not close fd if it fails.  If you are using fileno() to get the
-   file descriptor from a FILE *, then you will have to use dup() to avoid
-   double-close()ing the file descriptor.  Both gzclose() and fclose() will
-   close the associated file descriptor, so they need to have different file
-   descriptors.
-
-     gzdopen returns NULL if there was insufficient memory to allocate the
-   gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
-   provided, or '+' was provided), or if fd is -1.  The file descriptor is not
-   used until the next gz* read, write, seek, or close operation, so gzdopen
-   will not detect if fd is invalid (unless fd is -1).
-*/
-
-ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
-/*
-     Set the internal buffer size used by this library's functions.  The
-   default buffer size is 8192 bytes.  This function must be called after
-   gzopen() or gzdopen(), and before any other calls that read or write the
-   file.  The buffer memory allocation is always deferred to the first read or
-   write.  Three times that size in buffer space is allocated.  A larger buffer
-   size of, for example, 64K or 128K bytes will noticeably increase the speed
-   of decompression (reading).
-
-     The new buffer size also affects the maximum length for gzprintf().
-
-     gzbuffer() returns 0 on success, or -1 on failure, such as being called
-   too late.
-*/
-
-ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
-/*
-     Dynamically update the compression level or strategy.  See the description
-   of deflateInit2 for the meaning of these parameters.  Previously provided
-   data is flushed before the parameter change.
-
-     gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not
-   opened for writing, Z_ERRNO if there is an error writing the flushed data,
-   or Z_MEM_ERROR if there is a memory allocation error.
-*/
-
-ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
-/*
-     Reads the given number of uncompressed bytes from the compressed file.  If
-   the input file is not in gzip format, gzread copies the given number of
-   bytes into the buffer directly from the file.
-
-     After reaching the end of a gzip stream in the input, gzread will continue
-   to read, looking for another gzip stream.  Any number of gzip streams may be
-   concatenated in the input file, and will all be decompressed by gzread().
-   If something other than a gzip stream is encountered after a gzip stream,
-   that remaining trailing garbage is ignored (and no error is returned).
-
-     gzread can be used to read a gzip file that is being concurrently written.
-   Upon reaching the end of the input, gzread will return with the available
-   data.  If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
-   gzclearerr can be used to clear the end of file indicator in order to permit
-   gzread to be tried again.  Z_OK indicates that a gzip stream was completed
-   on the last gzread.  Z_BUF_ERROR indicates that the input file ended in the
-   middle of a gzip stream.  Note that gzread does not return -1 in the event
-   of an incomplete gzip stream.  This error is deferred until gzclose(), which
-   will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
-   stream.  Alternatively, gzerror can be used before gzclose to detect this
-   case.
-
-     gzread returns the number of uncompressed bytes actually read, less than
-   len for end of file, or -1 for error.  If len is too large to fit in an int,
-   then nothing is read, -1 is returned, and the error state is set to
-   Z_STREAM_ERROR.
-*/
-
-ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
-                                     gzFile file));
-/*
-     Read up to nitems items of size size from file to buf, otherwise operating
-   as gzread() does.  This duplicates the interface of stdio's fread(), with
-   size_t request and return types.  If the library defines size_t, then
-   z_size_t is identical to size_t.  If not, then z_size_t is an unsigned
-   integer type that can contain a pointer.
-
-     gzfread() returns the number of full items read of size size, or zero if
-   the end of the file was reached and a full item could not be read, or if
-   there was an error.  gzerror() must be consulted if zero is returned in
-   order to determine if there was an error.  If the multiplication of size and
-   nitems overflows, i.e. the product does not fit in a z_size_t, then nothing
-   is read, zero is returned, and the error state is set to Z_STREAM_ERROR.
-
-     In the event that the end of file is reached and only a partial item is
-   available at the end, i.e. the remaining uncompressed data length is not a
-   multiple of size, then the final partial item is nevetheless read into buf
-   and the end-of-file flag is set.  The length of the partial item read is not
-   provided, but could be inferred from the result of gztell().  This behavior
-   is the same as the behavior of fread() implementations in common libraries,
-   but it prevents the direct use of gzfread() to read a concurrently written
-   file, reseting and retrying on end-of-file, when size is not 1.
-*/
-
-ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
-                                voidpc buf, unsigned len));
-/*
-     Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of uncompressed bytes written or 0 in case of
-   error.
-*/
-
-ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
-                                      z_size_t nitems, gzFile file));
-/*
-     gzfwrite() writes nitems items of size size from buf to file, duplicating
-   the interface of stdio's fwrite(), with size_t request and return types.  If
-   the library defines size_t, then z_size_t is identical to size_t.  If not,
-   then z_size_t is an unsigned integer type that can contain a pointer.
-
-     gzfwrite() returns the number of full items written of size size, or zero
-   if there was an error.  If the multiplication of size and nitems overflows,
-   i.e. the product does not fit in a z_size_t, then nothing is written, zero
-   is returned, and the error state is set to Z_STREAM_ERROR.
-*/
-
-ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
-/*
-     Converts, formats, and writes the arguments to the compressed file under
-   control of the format string, as in fprintf.  gzprintf returns the number of
-   uncompressed bytes actually written, or a negative zlib error code in case
-   of error.  The number of uncompressed bytes written is limited to 8191, or
-   one less than the buffer size given to gzbuffer().  The caller should assure
-   that this limit is not exceeded.  If it is exceeded, then gzprintf() will
-   return an error (0) with nothing written.  In this case, there may also be a
-   buffer overflow with unpredictable consequences, which is possible only if
-   zlib was compiled with the insecure functions sprintf() or vsprintf()
-   because the secure snprintf() or vsnprintf() functions were not available.
-   This can be determined using zlibCompileFlags().
-*/
-
-ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
-/*
-     Writes the given null-terminated string to the compressed file, excluding
-   the terminating null character.
-
-     gzputs returns the number of characters written, or -1 in case of error.
-*/
-
-ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
-/*
-     Reads bytes from the compressed file until len-1 characters are read, or a
-   newline character is read and transferred to buf, or an end-of-file
-   condition is encountered.  If any characters are read or if len == 1, the
-   string is terminated with a null character.  If no characters are read due
-   to an end-of-file or len < 1, then the buffer is left untouched.
-
-     gzgets returns buf which is a null-terminated string, or it returns NULL
-   for end-of-file or in case of error.  If there was an error, the contents at
-   buf are indeterminate.
-*/
-
-ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
-/*
-     Writes c, converted to an unsigned char, into the compressed file.  gzputc
-   returns the value that was written, or -1 in case of error.
-*/
-
-ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
-/*
-     Reads one byte from the compressed file.  gzgetc returns this byte or -1
-   in case of end of file or error.  This is implemented as a macro for speed.
-   As such, it does not do all of the checking the other functions do.  I.e.
-   it does not check to see if file is NULL, nor whether the structure file
-   points to has been clobbered or not.
-*/
-
-ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
-/*
-     Push one character back onto the stream to be read as the first character
-   on the next read.  At least one character of push-back is allowed.
-   gzungetc() returns the character pushed, or -1 on failure.  gzungetc() will
-   fail if c is -1, and may fail if a character has been pushed but not read
-   yet.  If gzungetc is used immediately after gzopen or gzdopen, at least the
-   output buffer size of pushed characters is allowed.  (See gzbuffer above.)
-   The pushed character will be discarded if the stream is repositioned with
-   gzseek() or gzrewind().
-*/
-
-ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
-/*
-     Flushes all pending output into the compressed file.  The parameter flush
-   is as in the deflate() function.  The return value is the zlib error number
-   (see function gzerror below).  gzflush is only permitted when writing.
-
-     If the flush parameter is Z_FINISH, the remaining data is written and the
-   gzip stream is completed in the output.  If gzwrite() is called again, a new
-   gzip stream will be started in the output.  gzread() is able to read such
-   concatenated gzip streams.
-
-     gzflush should be called only when strictly necessary because it will
-   degrade compression if called too often.
-*/
-
-/*
-ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
-                                   z_off_t offset, int whence));
-
-     Sets the starting position for the next gzread or gzwrite on the given
-   compressed file.  The offset represents a number of bytes in the
-   uncompressed data stream.  The whence parameter is defined as in lseek(2);
-   the value SEEK_END is not supported.
-
-     If the file is opened for reading, this function is emulated but can be
-   extremely slow.  If the file is opened for writing, only forward seeks are
-   supported; gzseek then compresses a sequence of zeroes up to the new
-   starting position.
-
-     gzseek returns the resulting offset location as measured in bytes from
-   the beginning of the uncompressed stream, or -1 in case of error, in
-   particular if the file is opened for writing and the new starting position
-   would be before the current position.
-*/
-
-ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
-/*
-     Rewinds the given file. This function is supported only for reading.
-
-     gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
-*/
-
-/*
-ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
-
-     Returns the starting position for the next gzread or gzwrite on the given
-   compressed file.  This position represents a number of bytes in the
-   uncompressed data stream, and is zero when starting, even if appending or
-   reading a gzip stream from the middle of a file using gzdopen().
-
-     gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
-*/
-
-/*
-ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
-
-     Returns the current offset in the file being read or written.  This offset
-   includes the count of bytes that precede the gzip stream, for example when
-   appending or when using gzdopen() for reading.  When reading, the offset
-   does not include as yet unused buffered input.  This information can be used
-   for a progress indicator.  On error, gzoffset() returns -1.
-*/
-
-ZEXTERN int ZEXPORT gzeof OF((gzFile file));
-/*
-     Returns true (1) if the end-of-file indicator has been set while reading,
-   false (0) otherwise.  Note that the end-of-file indicator is set only if the
-   read tried to go past the end of the input, but came up short.  Therefore,
-   just like feof(), gzeof() may return false even if there is no more data to
-   read, in the event that the last read request was for the exact number of
-   bytes remaining in the input file.  This will happen if the input file size
-   is an exact multiple of the buffer size.
-
-     If gzeof() returns true, then the read functions will return no more data,
-   unless the end-of-file indicator is reset by gzclearerr() and the input file
-   has grown since the previous end of file was detected.
-*/
-
-ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
-/*
-     Returns true (1) if file is being copied directly while reading, or false
-   (0) if file is a gzip stream being decompressed.
-
-     If the input file is empty, gzdirect() will return true, since the input
-   does not contain a gzip stream.
-
-     If gzdirect() is used immediately after gzopen() or gzdopen() it will
-   cause buffers to be allocated to allow reading the file to determine if it
-   is a gzip file.  Therefore if gzbuffer() is used, it should be called before
-   gzdirect().
-
-     When writing, gzdirect() returns true (1) if transparent writing was
-   requested ("wT" for the gzopen() mode), or false (0) otherwise.  (Note:
-   gzdirect() is not needed when writing.  Transparent writing must be
-   explicitly requested, so the application already knows the answer.  When
-   linking statically, using gzdirect() will include all of the zlib code for
-   gzip file reading and decompression, which may not be desired.)
-*/
-
-ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
-/*
-     Flushes all pending output if necessary, closes the compressed file and
-   deallocates the (de)compression state.  Note that once file is closed, you
-   cannot call gzerror with file, since its structures have been deallocated.
-   gzclose must not be called more than once on the same file, just as free
-   must not be called more than once on the same allocation.
-
-     gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
-   file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
-   last read ended in the middle of a gzip stream, or Z_OK on success.
-*/
-
-ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
-ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
-/*
-     Same as gzclose(), but gzclose_r() is only for use when reading, and
-   gzclose_w() is only for use when writing or appending.  The advantage to
-   using these instead of gzclose() is that they avoid linking in zlib
-   compression or decompression code that is not used when only reading or only
-   writing respectively.  If gzclose() is used, then both compression and
-   decompression code will be included the application when linking to a static
-   zlib library.
-*/
-
-ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
-/*
-     Returns the error message for the last error which occurred on the given
-   compressed file.  errnum is set to zlib error number.  If an error occurred
-   in the file system and not in the compression library, errnum is set to
-   Z_ERRNO and the application may consult errno to get the exact error code.
-
-     The application must not modify the returned string.  Future calls to
-   this function may invalidate the previously returned string.  If file is
-   closed, then the string previously returned by gzerror will no longer be
-   available.
-
-     gzerror() should be used to distinguish errors from end-of-file for those
-   functions above that do not distinguish those cases in their return values.
-*/
-
-ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
-/*
-     Clears the error and end-of-file flags for file.  This is analogous to the
-   clearerr() function in stdio.  This is useful for continuing to read a gzip
-   file that is being written concurrently.
-*/
-
-#endif /* !Z_SOLO */
-
-                        /* checksum functions */
-
-/*
-     These functions are not related to compression but are exported
-   anyway because they might be useful in applications using the compression
-   library.
-*/
-
-ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum.  If buf is Z_NULL, this function returns the
-   required initial value for the checksum.
-
-     An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
-   much faster.
-
-   Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf,
-                                    z_size_t len));
-/*
-     Same as adler32(), but with a size_t length.
-*/
-
-/*
-ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
-                                          z_off_t len2));
-
-     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
-   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
-   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
-   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.  Note
-   that the z_off_t type (like off_t) is a signed integer.  If len2 is
-   negative, the result has no meaning or utility.
-*/
-
-ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
-/*
-     Update a running CRC-32 with the bytes buf[0..len-1] and return the
-   updated CRC-32.  If buf is Z_NULL, this function returns the required
-   initial value for the crc.  Pre- and post-conditioning (one's complement) is
-   performed within this function so it shouldn't be done by the application.
-
-   Usage example:
-
-     uLong crc = crc32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       crc = crc32(crc, buffer, length);
-     }
-     if (crc != original_crc) error();
-*/
-
-ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf,
-                                  z_size_t len));
-/*
-     Same as crc32(), but with a size_t length.
-*/
-
-/*
-ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
-
-     Combine two CRC-32 check values into one.  For two sequences of bytes,
-   seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
-   calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
-   check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
-   len2.
-*/
-
-
-                        /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
-                                     const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
-                                     const char *version, int stream_size));
-ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
-                                      int windowBits, int memLevel,
-                                      int strategy, const char *version,
-                                      int stream_size));
-ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
-                                      const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
-                                         unsigned char FAR *window,
-                                         const char *version,
-                                         int stream_size));
-#ifdef Z_PREFIX_SET
-#  define z_deflateInit(strm, level) \
-          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
-#  define z_inflateInit(strm) \
-          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
-#  define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
-          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
-#  define z_inflateInit2(strm, windowBits) \
-          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
-                        (int)sizeof(z_stream))
-#  define z_inflateBackInit(strm, windowBits, window) \
-          inflateBackInit_((strm), (windowBits), (window), \
-                           ZLIB_VERSION, (int)sizeof(z_stream))
-#else
-#  define deflateInit(strm, level) \
-          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
-#  define inflateInit(strm) \
-          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
-#  define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
-          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
-#  define inflateInit2(strm, windowBits) \
-          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
-                        (int)sizeof(z_stream))
-#  define inflateBackInit(strm, windowBits, window) \
-          inflateBackInit_((strm), (windowBits), (window), \
-                           ZLIB_VERSION, (int)sizeof(z_stream))
-#endif
-
-#ifndef Z_SOLO
-
-/* gzgetc() macro and its supporting function and exposed data structure.  Note
- * that the real internal state is much larger than the exposed structure.
- * This abbreviated structure exposes just enough for the gzgetc() macro.  The
- * user should not mess with these exposed elements, since their names or
- * behavior could change in the future, perhaps even capriciously.  They can
- * only be used by the gzgetc() macro.  You have been warned.
- */
-struct gzFile_s {
-    unsigned have;
-    unsigned char *next;
-    z_off64_t pos;
-};
-ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
-#ifdef Z_PREFIX_SET
-#  undef z_gzgetc
-#  define z_gzgetc(g) \
-          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
-#else
-#  define gzgetc(g) \
-          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
-#endif
-
-/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
- * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
- * both are true, the application gets the *64 functions, and the regular
- * functions are changed to 64 bits) -- in case these are set on systems
- * without large file support, _LFS64_LARGEFILE must also be true
- */
-#ifdef Z_LARGE64
-   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
-   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
-   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
-   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
-   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
-#endif
-
-#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
-#  ifdef Z_PREFIX_SET
-#    define z_gzopen z_gzopen64
-#    define z_gzseek z_gzseek64
-#    define z_gztell z_gztell64
-#    define z_gzoffset z_gzoffset64
-#    define z_adler32_combine z_adler32_combine64
-#    define z_crc32_combine z_crc32_combine64
-#  else
-#    define gzopen gzopen64
-#    define gzseek gzseek64
-#    define gztell gztell64
-#    define gzoffset gzoffset64
-#    define adler32_combine adler32_combine64
-#    define crc32_combine crc32_combine64
-#  endif
-#  ifndef Z_LARGE64
-     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
-     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
-     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
-     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
-     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
-#  endif
-#else
-   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
-   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
-   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
-   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
-   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
-   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
-#endif
-
-#else /* Z_SOLO */
-
-   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
-   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
-
-#endif /* !Z_SOLO */
-
-/* undocumented functions */
-ZEXTERN const char   * ZEXPORT zError           OF((int));
-ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
-ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
-ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
-ZEXTERN int            ZEXPORT inflateValidate OF((z_streamp, int));
-ZEXTERN unsigned long  ZEXPORT inflateCodesUsed OF ((z_streamp));
-ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
-ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
-#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(Z_SOLO)
-ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
-                                            const char *mode));
-#endif
-#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#  ifndef Z_SOLO
-ZEXTERN int            ZEXPORTVA gzvprintf Z_ARG((gzFile file,
-                                                  const char *format,
-                                                  va_list va));
-#  endif
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ZLIB_H */
diff --git a/Modules/zlib/zlib.map b/Modules/zlib/zlib.map
deleted file mode 100644
index 40fa9db..0000000
--- a/Modules/zlib/zlib.map
+++ /dev/null
@@ -1,94 +0,0 @@
-ZLIB_1.2.0 {

-  global:

-    compressBound;

-    deflateBound;

-    inflateBack;

-    inflateBackEnd;

-    inflateBackInit_;

-    inflateCopy;

-  local:

-    deflate_copyright;

-    inflate_copyright;

-    inflate_fast;

-    inflate_table;

-    zcalloc;

-    zcfree;

-    z_errmsg;

-    gz_error;

-    gz_intmax;

-    _*;

-};

-

-ZLIB_1.2.0.2 {

-    gzclearerr;

-    gzungetc;

-    zlibCompileFlags;

-} ZLIB_1.2.0;

-

-ZLIB_1.2.0.8 {

-    deflatePrime;

-} ZLIB_1.2.0.2;

-

-ZLIB_1.2.2 {

-    adler32_combine;

-    crc32_combine;

-    deflateSetHeader;

-    inflateGetHeader;

-} ZLIB_1.2.0.8;

-

-ZLIB_1.2.2.3 {

-    deflateTune;

-    gzdirect;

-} ZLIB_1.2.2;

-

-ZLIB_1.2.2.4 {

-    inflatePrime;

-} ZLIB_1.2.2.3;

-

-ZLIB_1.2.3.3 {

-    adler32_combine64;

-    crc32_combine64;

-    gzopen64;

-    gzseek64;

-    gztell64;

-    inflateUndermine;

-} ZLIB_1.2.2.4;

-

-ZLIB_1.2.3.4 {

-    inflateReset2;

-    inflateMark;

-} ZLIB_1.2.3.3;

-

-ZLIB_1.2.3.5 {

-    gzbuffer;

-    gzoffset;

-    gzoffset64;

-    gzclose_r;

-    gzclose_w;

-} ZLIB_1.2.3.4;

-

-ZLIB_1.2.5.1 {

-    deflatePending;

-} ZLIB_1.2.3.5;

-

-ZLIB_1.2.5.2 {

-    deflateResetKeep;

-    gzgetc_;

-    inflateResetKeep;

-} ZLIB_1.2.5.1;

-

-ZLIB_1.2.7.1 {

-    inflateGetDictionary;

-    gzvprintf;

-} ZLIB_1.2.5.2;

-

-ZLIB_1.2.9 {

-    inflateCodesUsed;

-    inflateValidate;

-    uncompress2;

-    gzfread;

-    gzfwrite;

-    deflateGetDictionary;

-    adler32_z;

-    crc32_z;

-} ZLIB_1.2.7.1;

diff --git a/Modules/zlib/zlib.pc.in b/Modules/zlib/zlib.pc.in
deleted file mode 100644
index 7e5acf9..0000000
--- a/Modules/zlib/zlib.pc.in
+++ /dev/null
@@ -1,13 +0,0 @@
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-sharedlibdir=@sharedlibdir@
-includedir=@includedir@
-
-Name: zlib
-Description: zlib compression library
-Version: @VERSION@
-
-Requires:
-Libs: -L${libdir} -L${sharedlibdir} -lz
-Cflags: -I${includedir}
diff --git a/Modules/zlib/zutil.c b/Modules/zlib/zutil.c
deleted file mode 100644
index a76c6b0..0000000
--- a/Modules/zlib/zutil.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2017 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zutil.h"
-#ifndef Z_SOLO
-#  include "gzguts.h"
-#endif
-
-z_const char * const z_errmsg[10] = {
-    (z_const char *)"need dictionary",     /* Z_NEED_DICT       2  */
-    (z_const char *)"stream end",          /* Z_STREAM_END      1  */
-    (z_const char *)"",                    /* Z_OK              0  */
-    (z_const char *)"file error",          /* Z_ERRNO         (-1) */
-    (z_const char *)"stream error",        /* Z_STREAM_ERROR  (-2) */
-    (z_const char *)"data error",          /* Z_DATA_ERROR    (-3) */
-    (z_const char *)"insufficient memory", /* Z_MEM_ERROR     (-4) */
-    (z_const char *)"buffer error",        /* Z_BUF_ERROR     (-5) */
-    (z_const char *)"incompatible version",/* Z_VERSION_ERROR (-6) */
-    (z_const char *)""
-};
-
-
-const char * ZEXPORT zlibVersion()
-{
-    return ZLIB_VERSION;
-}
-
-uLong ZEXPORT zlibCompileFlags()
-{
-    uLong flags;
-
-    flags = 0;
-    switch ((int)(sizeof(uInt))) {
-    case 2:     break;
-    case 4:     flags += 1;     break;
-    case 8:     flags += 2;     break;
-    default:    flags += 3;
-    }
-    switch ((int)(sizeof(uLong))) {
-    case 2:     break;
-    case 4:     flags += 1 << 2;        break;
-    case 8:     flags += 2 << 2;        break;
-    default:    flags += 3 << 2;
-    }
-    switch ((int)(sizeof(voidpf))) {
-    case 2:     break;
-    case 4:     flags += 1 << 4;        break;
-    case 8:     flags += 2 << 4;        break;
-    default:    flags += 3 << 4;
-    }
-    switch ((int)(sizeof(z_off_t))) {
-    case 2:     break;
-    case 4:     flags += 1 << 6;        break;
-    case 8:     flags += 2 << 6;        break;
-    default:    flags += 3 << 6;
-    }
-#ifdef ZLIB_DEBUG
-    flags += 1 << 8;
-#endif
-#if defined(ASMV) || defined(ASMINF)
-    flags += 1 << 9;
-#endif
-#ifdef ZLIB_WINAPI
-    flags += 1 << 10;
-#endif
-#ifdef BUILDFIXED
-    flags += 1 << 12;
-#endif
-#ifdef DYNAMIC_CRC_TABLE
-    flags += 1 << 13;
-#endif
-#ifdef NO_GZCOMPRESS
-    flags += 1L << 16;
-#endif
-#ifdef NO_GZIP
-    flags += 1L << 17;
-#endif
-#ifdef PKZIP_BUG_WORKAROUND
-    flags += 1L << 20;
-#endif
-#ifdef FASTEST
-    flags += 1L << 21;
-#endif
-#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#  ifdef NO_vsnprintf
-    flags += 1L << 25;
-#    ifdef HAS_vsprintf_void
-    flags += 1L << 26;
-#    endif
-#  else
-#    ifdef HAS_vsnprintf_void
-    flags += 1L << 26;
-#    endif
-#  endif
-#else
-    flags += 1L << 24;
-#  ifdef NO_snprintf
-    flags += 1L << 25;
-#    ifdef HAS_sprintf_void
-    flags += 1L << 26;
-#    endif
-#  else
-#    ifdef HAS_snprintf_void
-    flags += 1L << 26;
-#    endif
-#  endif
-#endif
-    return flags;
-}
-
-#ifdef ZLIB_DEBUG
-#include <stdlib.h>
-#  ifndef verbose
-#    define verbose 0
-#  endif
-int ZLIB_INTERNAL z_verbose = verbose;
-
-void ZLIB_INTERNAL z_error (m)
-    char *m;
-{
-    fprintf(stderr, "%s\n", m);
-    exit(1);
-}
-#endif
-
-/* exported to allow conversion of error code to string for compress() and
- * uncompress()
- */
-const char * ZEXPORT zError(err)
-    int err;
-{
-    return ERR_MSG(err);
-}
-
-#if defined(_WIN32_WCE)
-    /* The Microsoft C Run-Time Library for Windows CE doesn't have
-     * errno.  We define it as a global variable to simplify porting.
-     * Its value is always 0 and should not be used.
-     */
-    int errno = 0;
-#endif
-
-#ifndef HAVE_MEMCPY
-
-void ZLIB_INTERNAL zmemcpy(dest, source, len)
-    Bytef* dest;
-    const Bytef* source;
-    uInt  len;
-{
-    if (len == 0) return;
-    do {
-        *dest++ = *source++; /* ??? to be unrolled */
-    } while (--len != 0);
-}
-
-int ZLIB_INTERNAL zmemcmp(s1, s2, len)
-    const Bytef* s1;
-    const Bytef* s2;
-    uInt  len;
-{
-    uInt j;
-
-    for (j = 0; j < len; j++) {
-        if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
-    }
-    return 0;
-}
-
-void ZLIB_INTERNAL zmemzero(dest, len)
-    Bytef* dest;
-    uInt  len;
-{
-    if (len == 0) return;
-    do {
-        *dest++ = 0;  /* ??? to be unrolled */
-    } while (--len != 0);
-}
-#endif
-
-#ifndef Z_SOLO
-
-#ifdef SYS16BIT
-
-#ifdef __TURBOC__
-/* Turbo C in 16-bit mode */
-
-#  define MY_ZCALLOC
-
-/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
- * and farmalloc(64K) returns a pointer with an offset of 8, so we
- * must fix the pointer. Warning: the pointer must be put back to its
- * original form in order to free it, use zcfree().
- */
-
-#define MAX_PTR 10
-/* 10*64K = 640K */
-
-local int next_ptr = 0;
-
-typedef struct ptr_table_s {
-    voidpf org_ptr;
-    voidpf new_ptr;
-} ptr_table;
-
-local ptr_table table[MAX_PTR];
-/* This table is used to remember the original form of pointers
- * to large buffers (64K). Such pointers are normalized with a zero offset.
- * Since MSDOS is not a preemptive multitasking OS, this table is not
- * protected from concurrent access. This hack doesn't work anyway on
- * a protected system like OS/2. Use Microsoft C instead.
- */
-
-voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
-    voidpf buf;
-    ulg bsize = (ulg)items*size;
-
-    (void)opaque;
-
-    /* If we allocate less than 65520 bytes, we assume that farmalloc
-     * will return a usable pointer which doesn't have to be normalized.
-     */
-    if (bsize < 65520L) {
-        buf = farmalloc(bsize);
-        if (*(ush*)&buf != 0) return buf;
-    } else {
-        buf = farmalloc(bsize + 16L);
-    }
-    if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
-    table[next_ptr].org_ptr = buf;
-
-    /* Normalize the pointer to seg:0 */
-    *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
-    *(ush*)&buf = 0;
-    table[next_ptr++].new_ptr = buf;
-    return buf;
-}
-
-void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
-{
-    int n;
-
-    (void)opaque;
-
-    if (*(ush*)&ptr != 0) { /* object < 64K */
-        farfree(ptr);
-        return;
-    }
-    /* Find the original pointer */
-    for (n = 0; n < next_ptr; n++) {
-        if (ptr != table[n].new_ptr) continue;
-
-        farfree(table[n].org_ptr);
-        while (++n < next_ptr) {
-            table[n-1] = table[n];
-        }
-        next_ptr--;
-        return;
-    }
-    Assert(0, "zcfree: ptr not found");
-}
-
-#endif /* __TURBOC__ */
-
-
-#ifdef M_I86
-/* Microsoft C in 16-bit mode */
-
-#  define MY_ZCALLOC
-
-#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
-#  define _halloc  halloc
-#  define _hfree   hfree
-#endif
-
-voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
-{
-    (void)opaque;
-    return _halloc((long)items, size);
-}
-
-void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
-{
-    (void)opaque;
-    _hfree(ptr);
-}
-
-#endif /* M_I86 */
-
-#endif /* SYS16BIT */
-
-
-#ifndef MY_ZCALLOC /* Any system without a special alloc function */
-
-#ifndef STDC
-extern voidp  malloc OF((uInt size));
-extern voidp  calloc OF((uInt items, uInt size));
-extern void   free   OF((voidpf ptr));
-#endif
-
-voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
-    voidpf opaque;
-    unsigned items;
-    unsigned size;
-{
-    (void)opaque;
-    return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
-                              (voidpf)calloc(items, size);
-}
-
-void ZLIB_INTERNAL zcfree (opaque, ptr)
-    voidpf opaque;
-    voidpf ptr;
-{
-    (void)opaque;
-    free(ptr);
-}
-
-#endif /* MY_ZCALLOC */
-
-#endif /* !Z_SOLO */
diff --git a/Modules/zlib/zutil.h b/Modules/zlib/zutil.h
deleted file mode 100644
index b079ea6..0000000
--- a/Modules/zlib/zutil.h
+++ /dev/null
@@ -1,271 +0,0 @@
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id$ */
-
-#ifndef ZUTIL_H
-#define ZUTIL_H
-
-#ifdef HAVE_HIDDEN
-#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-#else
-#  define ZLIB_INTERNAL
-#endif
-
-#include "zlib.h"
-
-#if defined(STDC) && !defined(Z_SOLO)
-#  if !(defined(_WIN32_WCE) && defined(_MSC_VER))
-#    include <stddef.h>
-#  endif
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-
-#ifdef Z_SOLO
-   typedef long ptrdiff_t;  /* guess -- will be caught if guess is wrong */
-#endif
-
-#ifndef local
-#  define local static
-#endif
-/* since "static" is used to mean two completely different things in C, we
-   define "local" for the non-static meaning of "static", for readability
-   (compile with -Dlocal if your debugger can't find static symbols) */
-
-typedef unsigned char  uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long  ulg;
-
-extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
-/* (size given to avoid silly warnings with Visual C++) */
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
-  return (strm->msg = ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
-        /* common constants */
-
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
-        /* target dependencies */
-
-#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
-#  define OS_CODE  0x00
-#  ifndef Z_SOLO
-#    if defined(__TURBOC__) || defined(__BORLANDC__)
-#      if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
-         /* Allow compilation with ANSI keywords only enabled */
-         void _Cdecl farfree( void *block );
-         void *_Cdecl farmalloc( unsigned long nbytes );
-#      else
-#        include <alloc.h>
-#      endif
-#    else /* MSC or DJGPP */
-#      include <malloc.h>
-#    endif
-#  endif
-#endif
-
-#ifdef AMIGA
-#  define OS_CODE  1
-#endif
-
-#if defined(VAXC) || defined(VMS)
-#  define OS_CODE  2
-#  define F_OPEN(name, mode) \
-     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
-#endif
-
-#ifdef __370__
-#  if __TARGET_LIB__ < 0x20000000
-#    define OS_CODE 4
-#  elif __TARGET_LIB__ < 0x40000000
-#    define OS_CODE 11
-#  else
-#    define OS_CODE 8
-#  endif
-#endif
-
-#if defined(ATARI) || defined(atarist)
-#  define OS_CODE  5
-#endif
-
-#ifdef OS2
-#  define OS_CODE  6
-#  if defined(M_I86) && !defined(Z_SOLO)
-#    include <malloc.h>
-#  endif
-#endif
-
-#if defined(MACOS) || defined(TARGET_OS_MAC)
-#  define OS_CODE  7
-#  ifndef Z_SOLO
-#    if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-#      include <unix.h> /* for fdopen */
-#    else
-#      ifndef fdopen
-#        define fdopen(fd,mode) NULL /* No fdopen() */
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __acorn
-#  define OS_CODE 13
-#endif
-
-#if defined(WIN32) && !defined(__CYGWIN__)
-#  define OS_CODE  10
-#endif
-
-#ifdef _BEOS_
-#  define OS_CODE  16
-#endif
-
-#ifdef __TOS_OS400__
-#  define OS_CODE 18
-#endif
-
-#ifdef __APPLE__
-#  define OS_CODE 19
-#endif
-
-#if defined(_BEOS_) || defined(RISCOS)
-#  define fdopen(fd,mode) NULL /* No fdopen() */
-#endif
-
-#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
-#  if defined(_WIN32_WCE)
-#    define fdopen(fd,mode) NULL /* No fdopen() */
-#    ifndef _PTRDIFF_T_DEFINED
-       typedef int ptrdiff_t;
-#      define _PTRDIFF_T_DEFINED
-#    endif
-#  else
-#    define fdopen(fd,type)  _fdopen(fd,type)
-#  endif
-#endif
-
-#if defined(__BORLANDC__) && !defined(MSDOS)
-  #pragma warn -8004
-  #pragma warn -8008
-  #pragma warn -8066
-#endif
-
-/* provide prototypes for these when building zlib without LFS */
-#if !defined(_WIN32) && \
-    (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
-    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
-    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
-#endif
-
-        /* common defaults */
-
-#ifndef OS_CODE
-#  define OS_CODE  3     /* assume Unix */
-#endif
-
-#ifndef F_OPEN
-#  define F_OPEN(name, mode) fopen((name), (mode))
-#endif
-
-         /* functions */
-
-#if defined(pyr) || defined(Z_SOLO)
-#  define NO_MEMCPY
-#endif
-#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
- /* Use our own functions for small and medium model with MSC <= 5.0.
-  * You may have to use the same strategy for Borland C (untested).
-  * The __SC__ check is for Symantec.
-  */
-#  define NO_MEMCPY
-#endif
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-#  define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
-#    define zmemcpy _fmemcpy
-#    define zmemcmp _fmemcmp
-#    define zmemzero(dest, len) _fmemset(dest, 0, len)
-#  else
-#    define zmemcpy memcpy
-#    define zmemcmp memcmp
-#    define zmemzero(dest, len) memset(dest, 0, len)
-#  endif
-#else
-   void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
-   int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
-   void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
-#endif
-
-/* Diagnostic functions */
-#ifdef ZLIB_DEBUG
-#  include <stdio.h>
-   extern int ZLIB_INTERNAL z_verbose;
-   extern void ZLIB_INTERNAL z_error OF((char *m));
-#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) {if (z_verbose>=0) fprintf x ;}
-#  define Tracev(x) {if (z_verbose>0) fprintf x ;}
-#  define Tracevv(x) {if (z_verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-#ifndef Z_SOLO
-   voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
-                                    unsigned size));
-   void ZLIB_INTERNAL zcfree  OF((voidpf opaque, voidpf ptr));
-#endif
-
-#define ZALLOC(strm, items, size) \
-           (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-/* Reverse the bytes in a 32-bit value */
-#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
-                    (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
-
-#endif /* ZUTIL_H */