Merged revisions 46753-51188 via svnmerge from

svn+ssh://pythondev@svn.python.org/python/trunk ........ r46755 | brett.cannon | 2006-06-08 18:23:04 +0200 (Thu, 08 Jun 2006) | 4 lines Make binascii.hexlify() use s# for its arguments instead of t# to actually match its documentation stating it accepts any read-only buffer. ........ r46757 | brett.cannon | 2006-06-08 19:00:45 +0200 (Thu, 08 Jun 2006) | 8 lines Buffer objects would return the read or write buffer for a wrapped object when the char buffer was requested. Now it actually returns the char buffer if available or raises a TypeError if it isn't (as is raised for the other buffer types if they are not present but requested). Not a backport candidate since it does change semantics of the buffer object (although it could be argued this is enough of a bug to bother backporting). ........ r46760 | andrew.kuchling | 2006-06-09 03:10:17 +0200 (Fri, 09 Jun 2006) | 1 line Update functools section ........ r46762 | tim.peters | 2006-06-09 04:11:02 +0200 (Fri, 09 Jun 2006) | 6 lines Whitespace normalization. Since test_file is implicated in mysterious test failures when followed by test_optparse, if I had any brains I'd look at the checkin that last changed test_file ;-) ........ r46763 | tim.peters | 2006-06-09 05:09:42 +0200 (Fri, 09 Jun 2006) | 5 lines To boost morale :-), force test_optparse to run immediately after test_file until we can figure out how to fix it. (See python-dev; at the moment we don't even know which checkin caused the problem.) ........ r46764 | tim.peters | 2006-06-09 05:51:41 +0200 (Fri, 09 Jun 2006) | 6 lines AutoFileTests.tearDown(): Removed mysterious undocumented try/except. Remove TESTFN. Throughout: used open() instead of file(), and wrapped long lines. ........ r46765 | tim.peters | 2006-06-09 06:02:06 +0200 (Fri, 09 Jun 2006) | 8 lines testUnicodeOpen(): I have no idea why, but making this test clean up after itself appears to fix the test failures when test_optparse follows test_file. test_main(): Get rid of TESTFN no matter what. That's also enough to fix the mystery failures. Doesn't hurt to fix them twice :-) ........ r46766 | tim.peters | 2006-06-09 07:12:40 +0200 (Fri, 09 Jun 2006) | 6 lines Remove the temporary hack to force test_optparse to run immediately after test_file. At least 8 buildbot boxes passed since the underlying problem got fixed, and they all failed before the fix, so there's no point to this anymore. ........ r46767 | neal.norwitz | 2006-06-09 07:54:18 +0200 (Fri, 09 Jun 2006) | 1 line Fix grammar and reflow ........ r46769 | andrew.kuchling | 2006-06-09 12:22:35 +0200 (Fri, 09 Jun 2006) | 1 line Markup fix ........ r46773 | andrew.kuchling | 2006-06-09 15:15:57 +0200 (Fri, 09 Jun 2006) | 1 line [Bug #1472827] Make saxutils.XMLGenerator handle \r\n\t in attribute values by escaping them properly. 2.4 bugfix candidate. ........ r46778 | kristjan.jonsson | 2006-06-09 18:28:01 +0200 (Fri, 09 Jun 2006) | 2 lines Turn off warning about deprecated CRT functions on for VisualStudio .NET 2005. Make the definition #ARRAYSIZE conditional. VisualStudio .NET 2005 already has it defined using a better gimmick. ........ r46779 | phillip.eby | 2006-06-09 18:40:18 +0200 (Fri, 09 Jun 2006) | 2 lines Import wsgiref into the stdlib, as of the external version 0.1-r2181. ........ r46783 | andrew.kuchling | 2006-06-09 18:44:40 +0200 (Fri, 09 Jun 2006) | 1 line Add note about XMLGenerator bugfix ........ r46784 | andrew.kuchling | 2006-06-09 18:46:51 +0200 (Fri, 09 Jun 2006) | 1 line Add note about wsgiref ........ r46785 | brett.cannon | 2006-06-09 19:05:48 +0200 (Fri, 09 Jun 2006) | 2 lines Fix inconsistency in naming within an enum. ........ r46787 | tim.peters | 2006-06-09 19:47:00 +0200 (Fri, 09 Jun 2006) | 2 lines Whitespace normalization. ........ r46792 | georg.brandl | 2006-06-09 20:29:52 +0200 (Fri, 09 Jun 2006) | 3 lines Test file.__exit__. ........ r46794 | brett.cannon | 2006-06-09 20:40:46 +0200 (Fri, 09 Jun 2006) | 2 lines svn:ignore .pyc and .pyo files. ........ r46795 | georg.brandl | 2006-06-09 20:45:48 +0200 (Fri, 09 Jun 2006) | 3 lines RFE #1491485: str/unicode.endswith()/startswith() now accept a tuple as first argument. ........ r46798 | andrew.kuchling | 2006-06-09 21:03:16 +0200 (Fri, 09 Jun 2006) | 1 line Describe startswith()/endswiith() change; add reminder about wsgiref ........ r46799 | tim.peters | 2006-06-09 21:24:44 +0200 (Fri, 09 Jun 2006) | 11 lines Implementing a happy idea from Georg Brandl: make runtest() try to clean up files and directories the tests often leave behind by mistake. This is the first time in history I don't have a bogus "db_home" directory after running the tests ;-) Also worked on runtest's docstring, to say something about all the arguments, and to document the non-obvious return values. New functions runtest_inner() and cleanup_test_droppings() in support of the above. ........ r46800 | andrew.kuchling | 2006-06-09 21:43:25 +0200 (Fri, 09 Jun 2006) | 1 line Remove unused variable ........ r46801 | andrew.kuchling | 2006-06-09 21:56:05 +0200 (Fri, 09 Jun 2006) | 1 line Add some wsgiref text ........ r46803 | thomas.heller | 2006-06-09 21:59:11 +0200 (Fri, 09 Jun 2006) | 1 line set eol-style svn property ........ r46804 | thomas.heller | 2006-06-09 22:01:01 +0200 (Fri, 09 Jun 2006) | 1 line set eol-style svn property ........ r46805 | georg.brandl | 2006-06-09 22:43:48 +0200 (Fri, 09 Jun 2006) | 3 lines Make use of new str.startswith/endswith semantics. Occurences in email and compiler were ignored due to backwards compat requirements. ........ r46806 | brett.cannon | 2006-06-10 00:31:23 +0200 (Sat, 10 Jun 2006) | 4 lines An object with __call__ as an attribute, when called, will have that attribute checked for __call__ itself, and will continue to look until it finds an object without the attribute. This can lead to an infinite recursion. Closes bug #532646, again. Will be backported. ........ r46808 | brett.cannon | 2006-06-10 00:45:54 +0200 (Sat, 10 Jun 2006) | 2 lines Fix bug introduced in rev. 46806 by not having variable declaration at the top of a block. ........ r46812 | georg.brandl | 2006-06-10 08:40:50 +0200 (Sat, 10 Jun 2006) | 4 lines Apply perky's fix for #1503157: "/".join([u"", u""]) raising OverflowError. Also improve error message on overflow. ........ r46817 | martin.v.loewis | 2006-06-10 10:14:03 +0200 (Sat, 10 Jun 2006) | 2 lines Port cygwin kill_python changes from 2.4 branch. ........ r46818 | armin.rigo | 2006-06-10 12:57:40 +0200 (Sat, 10 Jun 2006) | 4 lines SF bug #1503294. PyThreadState_GET() complains if the tstate is NULL, but only in debug mode. ........ r46819 | martin.v.loewis | 2006-06-10 14:23:46 +0200 (Sat, 10 Jun 2006) | 4 lines Patch #1495999: Part two of Windows CE changes. - update header checks, using autoconf - provide dummies for getenv, environ, and GetVersion - adjust MSC_VER check in socketmodule.c ........ r46820 | skip.montanaro | 2006-06-10 16:09:11 +0200 (Sat, 10 Jun 2006) | 1 line document the class, not its initializer ........ r46821 | greg.ward | 2006-06-10 18:40:01 +0200 (Sat, 10 Jun 2006) | 4 lines Sync with Optik docs (rev 518): * restore "Extending optparse" section * document ALWAYS_TYPED_ACTIONS (SF #1449311) ........ r46824 | thomas.heller | 2006-06-10 21:51:46 +0200 (Sat, 10 Jun 2006) | 8 lines Upgrade to ctypes version 0.9.9.7. Summary of changes: - support for 'variable sized' data - support for anonymous structure/union fields - fix severe bug with certain arrays or structures containing more than 256 fields ........ r46825 | thomas.heller | 2006-06-10 21:55:36 +0200 (Sat, 10 Jun 2006) | 8 lines Upgrade to ctypes version 0.9.9.7. Summary of changes: - support for 'variable sized' data - support for anonymous structure/union fields - fix severe bug with certain arrays or structures containing more than 256 fields ........ r46826 | fred.drake | 2006-06-10 22:01:34 +0200 (Sat, 10 Jun 2006) | 4 lines SF patch #1303595: improve description of __builtins__, explaining how it varies between __main__ and other modules, and strongly suggest not touching it but using __builtin__ if absolutely necessary ........ r46827 | fred.drake | 2006-06-10 22:02:58 +0200 (Sat, 10 Jun 2006) | 1 line credit for SF patch #1303595 ........ r46831 | thomas.heller | 2006-06-10 22:29:34 +0200 (Sat, 10 Jun 2006) | 2 lines New docs for ctypes. ........ r46834 | thomas.heller | 2006-06-10 23:07:19 +0200 (Sat, 10 Jun 2006) | 1 line Fix a wrong printf format. ........ r46835 | thomas.heller | 2006-06-10 23:17:58 +0200 (Sat, 10 Jun 2006) | 1 line Fix the second occurrence of the problematic printf format. ........ r46837 | thomas.heller | 2006-06-10 23:56:03 +0200 (Sat, 10 Jun 2006) | 1 line Don't use C++ comment. ........ r46838 | thomas.heller | 2006-06-11 00:01:50 +0200 (Sun, 11 Jun 2006) | 1 line Handle failure of PyMem_Realloc. ........ r46839 | skip.montanaro | 2006-06-11 00:38:13 +0200 (Sun, 11 Jun 2006) | 2 lines Suppress warning on MacOSX about possible use before set of proc. ........ r46840 | tim.peters | 2006-06-11 00:51:45 +0200 (Sun, 11 Jun 2006) | 8 lines shuffle() doscstring: Removed warning about sequence length versus generator period. While this was a real weakness of the older WH generator for lists with just a few dozen elements, and so could potentially bite the naive ;-), the Twister should show excellent behavior up to at least 600 elements. Module docstring: reflowed some jarringly short lines. ........ r46844 | greg.ward | 2006-06-11 02:40:49 +0200 (Sun, 11 Jun 2006) | 4 lines Bug #1361643: fix textwrap.dedent() so it handles tabs appropriately, i.e. do *not* expand tabs, but treat them as whitespace that is not equivalent to spaces. Add a couple of test cases. Clarify docs. ........ r46850 | neal.norwitz | 2006-06-11 07:44:18 +0200 (Sun, 11 Jun 2006) | 5 lines Fix Coverity # 146. newDBSequenceObject would deref dbobj, so it can't be NULL. We know it's not NULL from the ParseTuple and DbObject_Check will verify it's not NULL. ........ r46851 | neal.norwitz | 2006-06-11 07:45:25 +0200 (Sun, 11 Jun 2006) | 4 lines Wrap some long lines Top/Bottom factor out some common expressions Add a XXX comment about widing offset. ........ r46852 | neal.norwitz | 2006-06-11 07:45:47 +0200 (Sun, 11 Jun 2006) | 1 line Add versionadded to doc ........ r46853 | neal.norwitz | 2006-06-11 07:47:14 +0200 (Sun, 11 Jun 2006) | 3 lines Update doc to make it agree with code. Bottom factor out some common code. ........ r46854 | neal.norwitz | 2006-06-11 07:48:14 +0200 (Sun, 11 Jun 2006) | 3 lines f_code can't be NULL based on Frame_New and other code that derefs it. So there doesn't seem to be much point to checking here. ........ r46855 | neal.norwitz | 2006-06-11 09:26:27 +0200 (Sun, 11 Jun 2006) | 1 line Fix errors found by pychecker ........ r46856 | neal.norwitz | 2006-06-11 09:26:50 +0200 (Sun, 11 Jun 2006) | 1 line warnings was imported at module scope, no need to import again ........ r46857 | neal.norwitz | 2006-06-11 09:27:56 +0200 (Sun, 11 Jun 2006) | 5 lines Fix errors found by pychecker. I think these changes are correct, but I'm not sure. Could someone who knows how this module works test it? It can at least start on the cmd line. ........ r46858 | neal.norwitz | 2006-06-11 10:35:14 +0200 (Sun, 11 Jun 2006) | 1 line Fix errors found by pychecker ........ r46859 | ronald.oussoren | 2006-06-11 16:33:36 +0200 (Sun, 11 Jun 2006) | 4 lines This patch improves the L&F of IDLE on OSX. The changes are conditionalized on being in an IDLE.app bundle on darwin. This does a slight reorganisation of the menus and adds support for file-open events. ........ r46860 | greg.ward | 2006-06-11 16:42:41 +0200 (Sun, 11 Jun 2006) | 1 line SF #1366250: optparse docs: fix inconsistency in variable name; minor tweaks. ........ r46861 | greg.ward | 2006-06-11 18:24:11 +0200 (Sun, 11 Jun 2006) | 3 lines Bug #1498146: fix optparse to handle Unicode strings in option help, description, and epilog. ........ r46862 | thomas.heller | 2006-06-11 19:04:22 +0200 (Sun, 11 Jun 2006) | 2 lines Release the GIL during COM method calls, to avoid deadlocks in Python coded COM objects. ........ r46863 | tim.peters | 2006-06-11 21:42:51 +0200 (Sun, 11 Jun 2006) | 2 lines Whitespace normalization. ........ r46864 | tim.peters | 2006-06-11 21:43:49 +0200 (Sun, 11 Jun 2006) | 2 lines Add missing svn:eol-style property to text files. ........ r46865 | ronald.oussoren | 2006-06-11 21:45:57 +0200 (Sun, 11 Jun 2006) | 2 lines Remove message about using make frameworkinstall, that's no longer necesssary ........ r46866 | ronald.oussoren | 2006-06-11 22:23:29 +0200 (Sun, 11 Jun 2006) | 2 lines Use configure to substitute the correct prefix instead of hardcoding ........ r46867 | ronald.oussoren | 2006-06-11 22:24:45 +0200 (Sun, 11 Jun 2006) | 4 lines - Change fixapplepython23.py to ensure that it will run with /usr/bin/python on intel macs. - Fix some minor problems in the installer for OSX ........ r46868 | neal.norwitz | 2006-06-11 22:25:56 +0200 (Sun, 11 Jun 2006) | 5 lines Try to fix several networking tests. The problem is that if hosts have a search path setup, some of these hosts resolve to the wrong address. By appending a period to the hostname, the hostname should only resolve to what we want it to resolve to. Hopefully this doesn't break different bots. ........ r46869 | neal.norwitz | 2006-06-11 22:42:02 +0200 (Sun, 11 Jun 2006) | 7 lines Try to fix another networking test. The problem is that if hosts have a search path setup, some of these hosts resolve to the wrong address. By appending a period to the hostname, the hostname should only resolve to what we want it to resolve to. Hopefully this doesn't break different bots. Also add more info to failure message to aid debugging test failure. ........ r46870 | neal.norwitz | 2006-06-11 22:46:46 +0200 (Sun, 11 Jun 2006) | 4 lines Fix test on PPC64 buildbot. It raised an IOError (really an URLError which derives from an IOError). That seems valid. Env Error includes both OSError and IOError, so this seems like a reasonable fix. ........ r46871 | tim.peters | 2006-06-11 22:52:59 +0200 (Sun, 11 Jun 2006) | 10 lines compare_generic_iter(): Fixed the failure of test_wsgiref's testFileWrapper when running with -O. test_simple_validation_error still fails under -O. That appears to be because wsgiref's validate.py uses `assert` statements all over the place to check arguments for sanity. That should all be changed (it's not a logical error in the software if a user passes bogus arguments, so this isn't a reasonable use for `assert` -- checking external preconditions should generally raise ValueError or TypeError instead, as appropriate). ........ r46872 | neal.norwitz | 2006-06-11 23:38:38 +0200 (Sun, 11 Jun 2006) | 1 line Get test to pass on S/390. Shout if you think this change is incorrect. ........ r46873 | neal.norwitz | 2006-06-12 04:05:55 +0200 (Mon, 12 Jun 2006) | 1 line Cleanup Py_ssize_t a little (get rid of second #ifdef) ........ r46874 | neal.norwitz | 2006-06-12 04:06:17 +0200 (Mon, 12 Jun 2006) | 1 line Fix some Py_ssize_t issues ........ r46875 | neal.norwitz | 2006-06-12 04:06:42 +0200 (Mon, 12 Jun 2006) | 1 line Fix some Py_ssize_t issues ........ r46876 | neal.norwitz | 2006-06-12 04:07:24 +0200 (Mon, 12 Jun 2006) | 2 lines Cleanup: Remove import of types to get StringTypes, we can just use basestring. ........ r46877 | neal.norwitz | 2006-06-12 04:07:57 +0200 (Mon, 12 Jun 2006) | 1 line Don't truncate if size_t is bigger than uint ........ r46878 | neal.norwitz | 2006-06-12 04:08:41 +0200 (Mon, 12 Jun 2006) | 1 line Don't leak the list object if there's an error allocating the item storage. Backport candidate ........ r46879 | neal.norwitz | 2006-06-12 04:09:03 +0200 (Mon, 12 Jun 2006) | 1 line Fix typo. Backport if anyone cares. :-) ........ r46880 | neal.norwitz | 2006-06-12 04:09:34 +0200 (Mon, 12 Jun 2006) | 1 line Fix indentation of case and a Py_ssize_t issue. ........ r46881 | neal.norwitz | 2006-06-12 04:11:18 +0200 (Mon, 12 Jun 2006) | 3 lines Get rid of f_restricted too. Doc the other 4 ints that were already removed at the NeedForSpeed sprint. ........ r46882 | neal.norwitz | 2006-06-12 04:13:21 +0200 (Mon, 12 Jun 2006) | 1 line Fix the socket tests so they can be run concurrently. Backport candidate ........ r46883 | neal.norwitz | 2006-06-12 04:16:10 +0200 (Mon, 12 Jun 2006) | 1 line i and j are initialized below when used. No need to do it twice ........ r46884 | neal.norwitz | 2006-06-12 05:05:03 +0200 (Mon, 12 Jun 2006) | 1 line Remove unused import ........ r46885 | neal.norwitz | 2006-06-12 05:05:40 +0200 (Mon, 12 Jun 2006) | 1 line Impl ssize_t ........ r46886 | neal.norwitz | 2006-06-12 05:33:09 +0200 (Mon, 12 Jun 2006) | 6 lines Patch #1503046, Conditional compilation of zlib.(de)compressobj.copy copy is only in newer versions of zlib. This should allow zlibmodule to work with older versions like the Tru64 buildbot. ........ r46887 | phillip.eby | 2006-06-12 06:04:32 +0200 (Mon, 12 Jun 2006) | 2 lines Sync w/external release 0.1.2. Please see PEP 360 before making changes to external packages. ........ r46888 | martin.v.loewis | 2006-06-12 06:26:31 +0200 (Mon, 12 Jun 2006) | 2 lines Get rid of function pointer cast. ........ r46889 | thomas.heller | 2006-06-12 08:05:57 +0200 (Mon, 12 Jun 2006) | 3 lines I don't know how that happend, but the entire file contents was duplicated. Thanks to Simon Percivall for the heads up. ........ r46890 | nick.coghlan | 2006-06-12 10:19:37 +0200 (Mon, 12 Jun 2006) | 1 line Fix site module docstring to match the code ........ r46891 | nick.coghlan | 2006-06-12 10:23:02 +0200 (Mon, 12 Jun 2006) | 1 line Fix site module docstring to match the code for Mac OSX, too ........ r46892 | nick.coghlan | 2006-06-12 10:27:13 +0200 (Mon, 12 Jun 2006) | 1 line The site module documentation also described the Windows behaviour incorrectly. ........ r46893 | nick.coghlan | 2006-06-12 12:17:11 +0200 (Mon, 12 Jun 2006) | 1 line Make the -m switch conform to the documentation of sys.path by behaving like the -c switch ........ r46894 | kristjan.jonsson | 2006-06-12 17:45:12 +0200 (Mon, 12 Jun 2006) | 2 lines Fix the CRT argument error handling for VisualStudio .NET 2005. Install a CRT error handler and disable the assertion for debug builds. This causes CRT to set errno to EINVAL. This update fixes crash cases in the test suite where the default CRT error handler would cause process exit. ........ r46899 | thomas.heller | 2006-06-12 22:56:48 +0200 (Mon, 12 Jun 2006) | 1 line Add pep-291 compatibility markers. ........ r46901 | ka-ping.yee | 2006-06-13 01:47:52 +0200 (Tue, 13 Jun 2006) | 5 lines Add the uuid module. This module has been tested so far on Windows XP (Python 2.4 and 2.5a2), Mac OS X (Python 2.3, 2.4, and 2.5a2), and Linux (Python 2.4 and 2.5a2). ........ r46902 | tim.peters | 2006-06-13 02:30:01 +0200 (Tue, 13 Jun 2006) | 2 lines Whitespace normalization. ........ r46903 | tim.peters | 2006-06-13 02:30:50 +0200 (Tue, 13 Jun 2006) | 2 lines Added missing svn:eol-style property to text files. ........ r46905 | tim.peters | 2006-06-13 05:30:07 +0200 (Tue, 13 Jun 2006) | 5 lines get_matching_blocks(): rewrote code & comments so they match; added more comments about why it's this way at all; and removed what looked like needless expense (sorting (i, j, k) triples directly should give exactly the same order as sorting (i, (i, j, k)) pairs). ........ r46906 | neal.norwitz | 2006-06-13 06:08:53 +0200 (Tue, 13 Jun 2006) | 1 line Don't fail if another process is listening on our port. ........ r46908 | neal.norwitz | 2006-06-13 10:28:19 +0200 (Tue, 13 Jun 2006) | 2 lines Initialize the type object so pychecker can't crash the interpreter. ........ r46909 | neal.norwitz | 2006-06-13 10:41:06 +0200 (Tue, 13 Jun 2006) | 1 line Verify the crash due to EncodingMap not initialized does not return ........ r46910 | thomas.heller | 2006-06-13 10:56:14 +0200 (Tue, 13 Jun 2006) | 3 lines Add some windows datatypes that were missing from this file, and add the aliases defined in windows header files for the structures. ........ r46911 | thomas.heller | 2006-06-13 11:40:14 +0200 (Tue, 13 Jun 2006) | 3 lines Add back WCHAR, UINT, DOUBLE, _LARGE_INTEGER, _ULARGE_INTEGER. VARIANT_BOOL is a special _ctypes data type, not c_short. ........ r46912 | ronald.oussoren | 2006-06-13 13:19:56 +0200 (Tue, 13 Jun 2006) | 4 lines Linecache contains support for PEP302 loaders, but fails to deal with loaders that return None to indicate that the module is valid but no source is available. This patch fixes that. ........ r46913 | andrew.kuchling | 2006-06-13 13:57:04 +0200 (Tue, 13 Jun 2006) | 1 line Mention uuid module ........ r46915 | walter.doerwald | 2006-06-13 14:02:12 +0200 (Tue, 13 Jun 2006) | 2 lines Fix passing errors to the encoder and decoder functions. ........ r46917 | walter.doerwald | 2006-06-13 14:04:43 +0200 (Tue, 13 Jun 2006) | 3 lines errors is an attribute in the incremental decoder not an argument. ........ r46919 | andrew.macintyre | 2006-06-13 17:04:24 +0200 (Tue, 13 Jun 2006) | 11 lines Patch #1454481: Make thread stack size runtime tunable. Heavily revised, comprising revisions: 46640 - original trunk revision (backed out in r46655) 46647 - markup fix (backed out in r46655) 46692:46918 merged from branch aimacintyre-sf1454481 branch tested on buildbots (Windows buildbots had problems not related to these changes). ........ r46920 | brett.cannon | 2006-06-13 18:06:55 +0200 (Tue, 13 Jun 2006) | 2 lines Remove unused variable. ........ r46921 | andrew.kuchling | 2006-06-13 18:41:41 +0200 (Tue, 13 Jun 2006) | 1 line Add ability to set stack size ........ r46923 | marc-andre.lemburg | 2006-06-13 19:04:26 +0200 (Tue, 13 Jun 2006) | 2 lines Update pybench to version 2.0. ........ r46924 | marc-andre.lemburg | 2006-06-13 19:07:14 +0200 (Tue, 13 Jun 2006) | 2 lines Revert wrong svn copy. ........ r46925 | andrew.macintyre | 2006-06-13 19:14:36 +0200 (Tue, 13 Jun 2006) | 2 lines fix exception usage ........ r46927 | tim.peters | 2006-06-13 20:37:07 +0200 (Tue, 13 Jun 2006) | 2 lines Whitespace normalization. ........ r46928 | marc-andre.lemburg | 2006-06-13 20:56:56 +0200 (Tue, 13 Jun 2006) | 9 lines Updated to pybench 2.0. See svn.python.org/external/pybench-2.0 for the original import of that version. Note that platform.py was not copied over from pybench-2.0 since it is already part of Python 2.5. ........ r46929 | andrew.macintyre | 2006-06-13 21:02:35 +0200 (Tue, 13 Jun 2006) | 5 lines Increase the small thread stack size to get the test to pass reliably on the one buildbot that insists on more than 32kB of thread stack. ........ r46930 | marc-andre.lemburg | 2006-06-13 21:20:07 +0200 (Tue, 13 Jun 2006) | 2 lines Whitespace normalization. ........ r46931 | thomas.heller | 2006-06-13 22:18:43 +0200 (Tue, 13 Jun 2006) | 2 lines More docs for ctypes. ........ r46932 | brett.cannon | 2006-06-13 23:34:24 +0200 (Tue, 13 Jun 2006) | 2 lines Ignore .pyc and .pyo files in Pybench. ........ r46933 | brett.cannon | 2006-06-13 23:46:41 +0200 (Tue, 13 Jun 2006) | 7 lines If a classic class defined a __coerce__() method that just returned its two arguments in reverse, the interpreter would infinitely recourse trying to get a coercion that worked. So put in a recursion check after a coercion is made and the next call to attempt to use the coerced values. Fixes bug #992017 and closes crashers/coerce.py . ........ r46936 | gerhard.haering | 2006-06-14 00:24:47 +0200 (Wed, 14 Jun 2006) | 3 lines Merged changes from external pysqlite 2.3.0 release. Documentation updates will follow in a few hours at the latest. Then we should be ready for beta1. ........ r46937 | brett.cannon | 2006-06-14 00:26:13 +0200 (Wed, 14 Jun 2006) | 2 lines Missed test for rev. 46933; infinite recursion from __coerce__() returning its arguments reversed. ........ r46938 | gerhard.haering | 2006-06-14 00:53:48 +0200 (Wed, 14 Jun 2006) | 2 lines Updated documentation for pysqlite 2.3.0 API. ........ r46939 | tim.peters | 2006-06-14 06:09:25 +0200 (Wed, 14 Jun 2006) | 10 lines SequenceMatcher.get_matching_blocks(): This now guarantees that adjacent triples in the result list describe non-adjacent matching blocks. That's _nice_ to have, and Guido said he wanted it. Not a bugfix candidate: Guido or not ;-), this changes visible endcase semantics (note that some tests had to change), and nothing about this was documented before. Since it was working as designed, and behavior was consistent with the docs, it wasn't "a bug". ........ r46940 | tim.peters | 2006-06-14 06:13:00 +0200 (Wed, 14 Jun 2006) | 2 lines Repaired typo in new comment. ........ r46941 | tim.peters | 2006-06-14 06:15:27 +0200 (Wed, 14 Jun 2006) | 2 lines Whitespace normalization. ........ r46942 | fred.drake | 2006-06-14 06:25:02 +0200 (Wed, 14 Jun 2006) | 3 lines - make some disabled tests run what they intend when enabled - remove some over-zealous triple-quoting ........ r46943 | fred.drake | 2006-06-14 07:04:47 +0200 (Wed, 14 Jun 2006) | 3 lines add tests for two cases that are handled correctly in the current code, but that SF patch 1504676 as written mis-handles ........ r46944 | fred.drake | 2006-06-14 07:15:51 +0200 (Wed, 14 Jun 2006) | 1 line explain an XXX in more detail ........ r46945 | martin.v.loewis | 2006-06-14 07:21:04 +0200 (Wed, 14 Jun 2006) | 1 line Patch #1455898: Incremental mode for "mbcs" codec. ........ r46946 | georg.brandl | 2006-06-14 08:08:31 +0200 (Wed, 14 Jun 2006) | 3 lines Bug #1339007: Shelf objects now don't raise an exception in their __del__ method when initialization failed. ........ r46948 | thomas.heller | 2006-06-14 08:18:15 +0200 (Wed, 14 Jun 2006) | 1 line Fix docstring. ........ r46949 | georg.brandl | 2006-06-14 08:29:07 +0200 (Wed, 14 Jun 2006) | 2 lines Bug #1501122: mention __gt__ &co in description of comparison order. ........ r46951 | thomas.heller | 2006-06-14 09:08:38 +0200 (Wed, 14 Jun 2006) | 1 line Write more docs. ........ r46952 | georg.brandl | 2006-06-14 10:31:39 +0200 (Wed, 14 Jun 2006) | 3 lines Bug #1153163: describe __add__ vs __radd__ behavior when adding objects of same type/of subclasses of the other. ........ r46954 | georg.brandl | 2006-06-14 10:42:11 +0200 (Wed, 14 Jun 2006) | 3 lines Bug #1202018: add some common mime.types locations. ........ r46955 | georg.brandl | 2006-06-14 10:50:03 +0200 (Wed, 14 Jun 2006) | 3 lines Bug #1117556: SimpleHTTPServer now tries to find and use the system's mime.types file for determining MIME types. ........ r46957 | thomas.heller | 2006-06-14 11:09:08 +0200 (Wed, 14 Jun 2006) | 1 line Document paramflags. ........ r46958 | thomas.heller | 2006-06-14 11:20:11 +0200 (Wed, 14 Jun 2006) | 1 line Add an __all__ list, since this module does 'from ctypes import *'. ........ r46959 | andrew.kuchling | 2006-06-14 15:59:15 +0200 (Wed, 14 Jun 2006) | 1 line Add item ........ r46961 | georg.brandl | 2006-06-14 18:46:43 +0200 (Wed, 14 Jun 2006) | 3 lines Bug #805015: doc error in PyUnicode_FromEncodedObject. ........ r46962 | gerhard.haering | 2006-06-15 00:28:37 +0200 (Thu, 15 Jun 2006) | 10 lines - Added version checks in C code to make sure we don't trigger bugs in older SQLite versions. - Added version checks in test suite so that we don't execute tests that we know will fail with older (buggy) SQLite versions. Now, all tests should run against all SQLite versions from 3.0.8 until 3.3.6 (latest one now). The sqlite3 module can be built against all these SQLite versions and the sqlite3 module does its best to not trigger bugs in SQLite, but using SQLite 3.3.3 or later is recommended. ........ r46963 | tim.peters | 2006-06-15 00:38:13 +0200 (Thu, 15 Jun 2006) | 2 lines Whitespace normalization. ........ r46964 | neal.norwitz | 2006-06-15 06:54:29 +0200 (Thu, 15 Jun 2006) | 9 lines Speculative checkin (requires approval of Gerhard Haering) This backs out the test changes in 46962 which prevented crashes by not running the tests via a version check. All the version checks added in that rev were removed from the tests. Code was added to the error handler in connection.c that seems to work with older versions of sqlite including 3.1.3. ........ r46965 | neal.norwitz | 2006-06-15 07:55:49 +0200 (Thu, 15 Jun 2006) | 1 line Try to narrow window of failure on slow/busy boxes (ppc64 buildbot) ........ r46966 | martin.v.loewis | 2006-06-15 08:45:05 +0200 (Thu, 15 Jun 2006) | 2 lines Make import/lookup of mbcs fail on non-Windows systems. ........ r46967 | ronald.oussoren | 2006-06-15 10:14:18 +0200 (Thu, 15 Jun 2006) | 2 lines Patch #1446489 (zipfile: support for ZIP64) ........ r46968 | neal.norwitz | 2006-06-15 10:16:44 +0200 (Thu, 15 Jun 2006) | 6 lines Re-revert this change. Install the version check and don't run the test until Gerhard has time to fully debug the issue. This affects versions before 3.2.1 (possibly only versions earlier than 3.1.3). Based on discussion on python-checkins. ........ r46969 | gregory.p.smith | 2006-06-15 10:52:32 +0200 (Thu, 15 Jun 2006) | 6 lines - bsddb: multithreaded DB access using the simple bsddb module interface now works reliably. It has been updated to use automatic BerkeleyDB deadlock detection and the bsddb.dbutils.DeadlockWrap wrapper to retry database calls that would previously deadlock. [SF python bug #775414] ........ r46970 | gregory.p.smith | 2006-06-15 11:23:52 +0200 (Thu, 15 Jun 2006) | 2 lines minor documentation cleanup. mention the bsddb.db interface explicitly by name. ........ r46971 | neal.norwitz | 2006-06-15 11:57:03 +0200 (Thu, 15 Jun 2006) | 5 lines Steal the trick from test_compiler to print out a slow msg. This will hopefully get the buildbots to pass. Not sure this test will be feasible or even work. But everything is red now, so it can't get much worse. ........ r46972 | neal.norwitz | 2006-06-15 12:24:49 +0200 (Thu, 15 Jun 2006) | 1 line Print some more info to get an idea of how much longer the test will last ........ r46981 | tim.peters | 2006-06-15 20:04:40 +0200 (Thu, 15 Jun 2006) | 6 lines Try to reduce the extreme peak memory and disk-space use of this test. It probably still requires more disk space than most buildbots have, and in any case is still so intrusive that if we don't find another way to test this I'm taking my buildbot offline permanently ;-) ........ r46982 | tim.peters | 2006-06-15 20:06:29 +0200 (Thu, 15 Jun 2006) | 2 lines Whitespace normalization. ........ r46983 | tim.peters | 2006-06-15 20:07:28 +0200 (Thu, 15 Jun 2006) | 2 lines Add missing svn:eol-style property to text files. ........ r46984 | tim.peters | 2006-06-15 20:38:19 +0200 (Thu, 15 Jun 2006) | 2 lines Oops -- I introduced an off-by-6436159488 error. ........ r46990 | neal.norwitz | 2006-06-16 06:30:34 +0200 (Fri, 16 Jun 2006) | 1 line Disable this test until we can determine what to do about it ........ r46991 | neal.norwitz | 2006-06-16 06:31:06 +0200 (Fri, 16 Jun 2006) | 1 line Param name is dir, not directory. Update docstring. Backport candidate ........ r46992 | neal.norwitz | 2006-06-16 06:31:28 +0200 (Fri, 16 Jun 2006) | 1 line Add missing period in comment. ........ r46993 | neal.norwitz | 2006-06-16 06:32:43 +0200 (Fri, 16 Jun 2006) | 1 line Fix whitespace, there are memory leaks in this module. ........ r46995 | fred.drake | 2006-06-17 01:45:06 +0200 (Sat, 17 Jun 2006) | 3 lines SF patch 1504676: Make sgmllib char and entity references pluggable (implementation/tests contributed by Sam Ruby) ........ r46996 | fred.drake | 2006-06-17 03:07:54 +0200 (Sat, 17 Jun 2006) | 1 line fix change that broke the htmllib tests ........ r46998 | martin.v.loewis | 2006-06-17 11:15:14 +0200 (Sat, 17 Jun 2006) | 3 lines Patch #763580: Add name and value arguments to Tkinter variable classes. ........ r46999 | martin.v.loewis | 2006-06-17 11:20:41 +0200 (Sat, 17 Jun 2006) | 2 lines Patch #1096231: Add default argument to wm_iconbitmap. ........ r47000 | martin.v.loewis | 2006-06-17 11:25:15 +0200 (Sat, 17 Jun 2006) | 2 lines Patch #1494750: Destroy master after deleting children. ........ r47003 | george.yoshida | 2006-06-17 18:31:52 +0200 (Sat, 17 Jun 2006) | 2 lines markup fix ........ r47005 | george.yoshida | 2006-06-17 18:39:13 +0200 (Sat, 17 Jun 2006) | 4 lines Update url. Old url returned status code:301 Moved permanently. ........ r47007 | martin.v.loewis | 2006-06-17 20:44:27 +0200 (Sat, 17 Jun 2006) | 2 lines Patch #812986: Update the canvas even if not tracing. ........ r47008 | martin.v.loewis | 2006-06-17 21:03:26 +0200 (Sat, 17 Jun 2006) | 2 lines Patch #815924: Restore ability to pass type= and icon= ........ r47009 | neal.norwitz | 2006-06-18 00:37:45 +0200 (Sun, 18 Jun 2006) | 1 line Fix typo in docstring ........ r47010 | neal.norwitz | 2006-06-18 00:38:15 +0200 (Sun, 18 Jun 2006) | 1 line Fix memory leak reported by valgrind while running test_subprocess ........ r47011 | fred.drake | 2006-06-18 04:57:35 +0200 (Sun, 18 Jun 2006) | 1 line remove unnecessary markup ........ r47013 | neal.norwitz | 2006-06-18 21:35:01 +0200 (Sun, 18 Jun 2006) | 7 lines Prevent spurious leaks when running regrtest.py -R. There may be more issues that crop up from time to time, but this change seems to have been pretty stable (no spurious warnings) for about a week. Other modules which use threads may require similar use of threading_setup/threading_cleanup from test_support. ........ r47014 | neal.norwitz | 2006-06-18 21:37:40 +0200 (Sun, 18 Jun 2006) | 9 lines The hppa ubuntu box sometimes hangs forever in these tests. My guess is that the wait is failing for some reason. Use WNOHANG, so we won't wait until the buildbot kills the test suite. I haven't been able to reproduce the failure, so I'm not sure if this will help or not. Hopefully, this change will cause the test to fail, rather than hang. That will be better since we will get the rest of the test results. It may also help us debug the real problem. ........ r47015 | neal.norwitz | 2006-06-18 22:10:24 +0200 (Sun, 18 Jun 2006) | 1 line Revert 47014 until it is more robust ........ r47016 | thomas.heller | 2006-06-18 23:27:04 +0200 (Sun, 18 Jun 2006) | 6 lines Fix typos. Fix doctest example. Mention in the tutorial that 'errcheck' is explained in the ref manual. Use better wording in some places. Remoce code examples that shouldn't be in the tutorial. Remove some XXX notices. ........ r47017 | georg.brandl | 2006-06-19 00:17:29 +0200 (Mon, 19 Jun 2006) | 3 lines Patch #1507676: improve exception messages in abstract.c, object.c and typeobject.c. ........ r47018 | neal.norwitz | 2006-06-19 07:40:44 +0200 (Mon, 19 Jun 2006) | 1 line Use Py_ssize_t ........ r47019 | georg.brandl | 2006-06-19 08:35:54 +0200 (Mon, 19 Jun 2006) | 3 lines Add news entry about error msg improvement. ........ r47020 | thomas.heller | 2006-06-19 09:07:49 +0200 (Mon, 19 Jun 2006) | 2 lines Try to repair the failing test on the OpenBSD buildbot. Trial and error... ........ r47021 | tim.peters | 2006-06-19 09:45:16 +0200 (Mon, 19 Jun 2006) | 2 lines Whitespace normalization. ........ r47022 | walter.doerwald | 2006-06-19 10:07:50 +0200 (Mon, 19 Jun 2006) | 4 lines Patch #1506645: add Python wrappers for the curses functions is_term_resized, resize_term and resizeterm. This uses three separate configure checks (one for each function). ........ r47023 | walter.doerwald | 2006-06-19 10:14:09 +0200 (Mon, 19 Jun 2006) | 2 lines Make check order match in configure and configure.in. ........ r47024 | tim.peters | 2006-06-19 10:14:28 +0200 (Mon, 19 Jun 2006) | 3 lines Repair KeyError when running test_threaded_import under -R, as reported by Neal on python-dev. ........ r47025 | thomas.heller | 2006-06-19 10:32:46 +0200 (Mon, 19 Jun 2006) | 3 lines Next try to fix the OpenBSD buildbot tests: Use ctypes.util.find_library to locate the C runtime library on platforms where is returns useful results. ........ r47026 | tim.peters | 2006-06-19 11:09:44 +0200 (Mon, 19 Jun 2006) | 13 lines TestHelp.make_parser(): This was making a permanent change to os.environ (setting envar COLUMNS), which at least caused test_float_default() to fail if the tests were run more than once. This repairs the test_optparse -R failures Neal reported on python-dev. It also explains some seemingly bizarre test_optparse failures we saw a couple weeks ago on the buildbots, when test_optparse failed due to test_file failing to clean up after itself, and then test_optparse failed in an entirely different way when regrtest's -w option ran test_optparse a second time. It's now obvious that make_parser() permanently changing os.environ was responsible for the second half of that. ........ r47027 | anthony.baxter | 2006-06-19 14:04:15 +0200 (Mon, 19 Jun 2006) | 2 lines Preparing for 2.5b1. ........ r47029 | fred.drake | 2006-06-19 19:31:16 +0200 (Mon, 19 Jun 2006) | 1 line remove non-working document formats from edist ........ r47030 | gerhard.haering | 2006-06-19 23:17:35 +0200 (Mon, 19 Jun 2006) | 5 lines Fixed a memory leak that was introduced with incorrect usage of the Python weak reference API in pysqlite 2.2.1. Bumbed pysqlite version number to upcoming pysqlite 2.3.1 release. ........ r47032 | ka-ping.yee | 2006-06-20 00:49:36 +0200 (Tue, 20 Jun 2006) | 2 lines Remove Python 2.3 compatibility comment. ........ r47033 | trent.mick | 2006-06-20 01:21:25 +0200 (Tue, 20 Jun 2006) | 2 lines Upgrade pyexpat to expat 2.0.0 (http://python.org/sf/1462338). ........ r47034 | trent.mick | 2006-06-20 01:57:41 +0200 (Tue, 20 Jun 2006) | 3 lines [ 1295808 ] expat symbols should be namespaced in pyexpat (http://python.org/sf/1295808) ........ r47039 | andrew.kuchling | 2006-06-20 13:52:16 +0200 (Tue, 20 Jun 2006) | 1 line Uncomment wsgiref section ........ r47040 | andrew.kuchling | 2006-06-20 14:15:09 +0200 (Tue, 20 Jun 2006) | 1 line Add four library items ........ r47041 | andrew.kuchling | 2006-06-20 14:19:54 +0200 (Tue, 20 Jun 2006) | 1 line Terminology and typography fixes ........ r47042 | andrew.kuchling | 2006-06-20 15:05:12 +0200 (Tue, 20 Jun 2006) | 1 line Add introductory paragraphs summarizing the release; minor edits ........ r47043 | andrew.kuchling | 2006-06-20 15:11:29 +0200 (Tue, 20 Jun 2006) | 1 line Minor edits and rearrangements; markup fix ........ r47044 | andrew.kuchling | 2006-06-20 15:20:30 +0200 (Tue, 20 Jun 2006) | 1 line [Bug #1504456] Mention xml -> xmlcore change ........ r47047 | brett.cannon | 2006-06-20 19:30:26 +0200 (Tue, 20 Jun 2006) | 2 lines Raise TestSkipped when the test socket connection is refused. ........ r47049 | brett.cannon | 2006-06-20 21:20:17 +0200 (Tue, 20 Jun 2006) | 2 lines Fix typo of exception name. ........ r47053 | brett.cannon | 2006-06-21 18:57:57 +0200 (Wed, 21 Jun 2006) | 5 lines At the C level, tuple arguments are passed in directly to the exception constructor, meaning it is treated as *args, not as a single argument. This means using the 'message' attribute won't work (until Py3K comes around), and so one must grab from 'arg' to get the error number. ........ r47054 | andrew.kuchling | 2006-06-21 19:10:18 +0200 (Wed, 21 Jun 2006) | 1 line Link to LibRef module documentation ........ r47055 | andrew.kuchling | 2006-06-21 19:17:10 +0200 (Wed, 21 Jun 2006) | 1 line Note some of Barry's work ........ r47056 | andrew.kuchling | 2006-06-21 19:17:28 +0200 (Wed, 21 Jun 2006) | 1 line Bump version ........ r47057 | georg.brandl | 2006-06-21 19:45:17 +0200 (Wed, 21 Jun 2006) | 3 lines fix [ 1509132 ] compiler module builds incorrect AST for TryExceptFinally ........ r47058 | georg.brandl | 2006-06-21 19:52:36 +0200 (Wed, 21 Jun 2006) | 3 lines Make test_fcntl aware of netbsd3. ........ r47059 | georg.brandl | 2006-06-21 19:53:17 +0200 (Wed, 21 Jun 2006) | 3 lines Patch #1509001: expected skips for netbsd3. ........ r47060 | gerhard.haering | 2006-06-21 22:55:04 +0200 (Wed, 21 Jun 2006) | 2 lines Removed call to enable_callback_tracebacks that slipped in by accident. ........ r47061 | armin.rigo | 2006-06-21 23:58:50 +0200 (Wed, 21 Jun 2006) | 13 lines Fix for an obscure bug introduced by revs 46806 and 46808, with a test. The problem of checking too eagerly for recursive calls is the following: if a RuntimeError is caused by recursion, and if code needs to normalize it immediately (as in the 2nd test), then PyErr_NormalizeException() needs a call to the RuntimeError class to instantiate it, and this hits the recursion limit again... causing PyErr_NormalizeException() to never finish. Moved this particular recursion check to slot_tp_call(), which is not involved in instantiating built-in exceptions. Backport candidate. ........ r47064 | neal.norwitz | 2006-06-22 08:30:50 +0200 (Thu, 22 Jun 2006) | 3 lines Copy the wsgiref package during make install. ........ r47065 | neal.norwitz | 2006-06-22 08:35:30 +0200 (Thu, 22 Jun 2006) | 1 line Reset the doc date to today for the automatic doc builds ........ r47067 | andrew.kuchling | 2006-06-22 15:10:23 +0200 (Thu, 22 Jun 2006) | 1 line Mention how to suppress warnings ........ r47069 | georg.brandl | 2006-06-22 16:46:17 +0200 (Thu, 22 Jun 2006) | 3 lines Set lineno correctly on list, tuple and dict literals. ........ r47070 | georg.brandl | 2006-06-22 16:46:46 +0200 (Thu, 22 Jun 2006) | 4 lines Test for correct compilation of try-except-finally stmt. Test for correct lineno on list, tuple, dict literals. ........ r47071 | fred.drake | 2006-06-22 17:50:08 +0200 (Thu, 22 Jun 2006) | 1 line fix markup nit ........ r47072 | brett.cannon | 2006-06-22 18:49:14 +0200 (Thu, 22 Jun 2006) | 6 lines 'warning's was improperly requiring that a command-line Warning category be both a subclass of Warning and a subclass of types.ClassType. The latter is no longer true thanks to new-style exceptions. Closes bug #1510580. Thanks to AMK for the test. ........ r47073 | ronald.oussoren | 2006-06-22 20:33:54 +0200 (Thu, 22 Jun 2006) | 3 lines MacOSX: Add a message to the first screen of the installer that tells users how to avoid updates to their shell profile. ........ r47074 | georg.brandl | 2006-06-22 21:02:18 +0200 (Thu, 22 Jun 2006) | 3 lines Fix my name ;) ........ r47075 | thomas.heller | 2006-06-22 21:07:36 +0200 (Thu, 22 Jun 2006) | 2 lines Small fixes, mostly in the markup. ........ r47076 | peter.astrand | 2006-06-22 22:06:46 +0200 (Thu, 22 Jun 2006) | 1 line Make it possible to run test_subprocess.py on Python 2.2, which lacks test_support.is_resource_enabled. ........ r47077 | peter.astrand | 2006-06-22 22:21:26 +0200 (Thu, 22 Jun 2006) | 1 line Applied patch #1506758: Prevent MemoryErrors with large MAXFD. ........ r47079 | neal.norwitz | 2006-06-23 05:32:44 +0200 (Fri, 23 Jun 2006) | 1 line Fix refleak ........ r47080 | fred.drake | 2006-06-23 08:03:45 +0200 (Fri, 23 Jun 2006) | 9 lines - SF bug #853506: IP6 address parsing in sgmllib ('[' and ']' were not accepted in unquoted attribute values) - cleaned up tests of character and entity reference decoding so the tests cover the documented relationships among handle_charref, handle_entityref, convert_charref, convert_codepoint, and convert_entityref, without bringing up Unicode issues that sgmllib cannot be involved in ........ r47085 | andrew.kuchling | 2006-06-23 21:23:40 +0200 (Fri, 23 Jun 2006) | 11 lines Fit Makefile for the Python doc environment better; this is a step toward including the howtos in the build process. * Put LaTeX output in ../paper-<whatever>/. * Put HTML output in ../html/ * Explain some of the Makefile variables * Remove some cruft dating to my environment (e.g. the 'web' target) This makefile isn't currently invoked by the documentation build process, so these changes won't destabilize anything. ........ r47086 | hyeshik.chang | 2006-06-23 23:16:18 +0200 (Fri, 23 Jun 2006) | 5 lines Bug #1511381: codec_getstreamcodec() in codec.c is corrected to omit a default "error" argument for NULL pointer. This allows the parser to take a codec from cjkcodecs again. (Reported by Taewook Kang and reviewed by Walter Doerwald) ........ r47091 | ronald.oussoren | 2006-06-25 22:44:16 +0200 (Sun, 25 Jun 2006) | 6 lines Workaround for bug #1512124 Without this patch IDLE will get unresponsive when you open the debugger window on OSX. This is both using the system Tcl/Tk on Tiger as the latest universal download from tk-components.sf.net. ........ r47092 | ronald.oussoren | 2006-06-25 23:14:19 +0200 (Sun, 25 Jun 2006) | 3 lines Drop the calldll demo's for macos, calldll isn't present anymore, no need to keep the demo's around. ........ r47093 | ronald.oussoren | 2006-06-25 23:15:58 +0200 (Sun, 25 Jun 2006) | 3 lines Use a path without a double slash to compile the .py files after installation (macosx, binary installer). This fixes bug #1508369 for python 2.5. ........ r47094 | ronald.oussoren | 2006-06-25 23:19:06 +0200 (Sun, 25 Jun 2006) | 3 lines Also install the .egg-info files in Lib. This will cause wsgiref.egg-info to be installed. ........ r47097 | andrew.kuchling | 2006-06-26 14:40:02 +0200 (Mon, 26 Jun 2006) | 1 line [Bug #1511998] Various comments from Nick Coghlan; thanks! ........ r47098 | andrew.kuchling | 2006-06-26 14:43:43 +0200 (Mon, 26 Jun 2006) | 1 line Describe workaround for PyRange_New()'s removal ........ r47099 | andrew.kuchling | 2006-06-26 15:08:24 +0200 (Mon, 26 Jun 2006) | 5 lines [Bug #1512163] Fix typo. This change will probably break tests on FreeBSD buildbots, but I'll check in a fix for that next. ........ r47100 | andrew.kuchling | 2006-06-26 15:12:16 +0200 (Mon, 26 Jun 2006) | 9 lines [Bug #1512163] Use one set of locking methods, lockf(); remove the flock() calls. On FreeBSD, the two methods lockf() and flock() end up using the same mechanism and the second one fails. A Linux man page claims that the two methods are orthogonal (so locks acquired one way don't interact with locks acquired the other way) but that clearly must be false. ........ r47101 | andrew.kuchling | 2006-06-26 15:23:10 +0200 (Mon, 26 Jun 2006) | 5 lines Add a test for a conflicting lock. On slow machines, maybe the time intervals (2 sec, 0.5 sec) will be too tight. I'll see how the buildbots like it. ........ r47103 | andrew.kuchling | 2006-06-26 16:33:24 +0200 (Mon, 26 Jun 2006) | 1 line Windows doesn't have os.fork(). I'll just disable this test for now ........ r47106 | andrew.kuchling | 2006-06-26 19:00:35 +0200 (Mon, 26 Jun 2006) | 9 lines Attempt to fix build failure on OS X and Debian alpha; the symptom is consistent with os.wait() returning immediately because some other subprocess had previously exited; the test suite then immediately tries to lock the mailbox and gets an error saying it's already locked. To fix this, do a waitpid() so the test suite only continues once the intended child process has exited. ........ r47113 | neal.norwitz | 2006-06-27 06:06:46 +0200 (Tue, 27 Jun 2006) | 1 line Ignore some more warnings in the dynamic linker on an older gentoo ........ r47114 | neal.norwitz | 2006-06-27 06:09:13 +0200 (Tue, 27 Jun 2006) | 6 lines Instead of doing a make test, run the regression tests out of the installed copy. This will hopefully catch problems where directories are added under Lib/ but not to Makefile.pre.in. This breaks out the 2 runs of the test suite with and without -O which is also nicer. ........ r47115 | neal.norwitz | 2006-06-27 06:12:58 +0200 (Tue, 27 Jun 2006) | 5 lines Fix SF bug #1513032, 'make install' failure on FreeBSD 5.3. No need to install lib-old, it's empty in 2.5. ........ r47116 | neal.norwitz | 2006-06-27 06:23:06 +0200 (Tue, 27 Jun 2006) | 1 line Test unimportant change to verify buildbot does not try to build ........ r47117 | neal.norwitz | 2006-06-27 06:26:30 +0200 (Tue, 27 Jun 2006) | 1 line Try again: test unimportant change to verify buildbot does not try to build ........ r47118 | neal.norwitz | 2006-06-27 06:28:56 +0200 (Tue, 27 Jun 2006) | 1 line Verify buildbot picks up these changes (really needs testing after last change to Makefile.pre.in) ........ r47121 | vinay.sajip | 2006-06-27 09:34:37 +0200 (Tue, 27 Jun 2006) | 1 line Removed buggy exception handling in doRollover of rotating file handlers. Exceptions now propagate to caller. ........ r47123 | ronald.oussoren | 2006-06-27 12:08:25 +0200 (Tue, 27 Jun 2006) | 3 lines MacOSX: fix rather dumb buglet that made it impossible to create extensions on OSX 10.3 when using a binary distribution build on 10.4. ........ r47125 | tim.peters | 2006-06-27 13:52:49 +0200 (Tue, 27 Jun 2006) | 2 lines Whitespace normalization. ........ r47128 | ronald.oussoren | 2006-06-27 14:53:52 +0200 (Tue, 27 Jun 2006) | 8 lines Use staticly build copies of zlib and bzip2 to build the OSX installer, that way the resulting binaries have a better change of running on 10.3. This patch also updates the search logic for sleepycat db3/4, without this patch you cannot use a sleepycat build with a non-standard prefix; with this you can (at least on OSX) if you add the prefix to CPPFLAGS/LDFLAGS at configure-time. This change is needed to build the binary installer for OSX. ........ r47131 | ronald.oussoren | 2006-06-27 17:45:32 +0200 (Tue, 27 Jun 2006) | 5 lines macosx: Install a libpython2.5.a inside the framework as a symlink to the actual dylib at the root of the framework, that way tools that expect a unix-like install (python-config, but more importantly external products like mod_python) work correctly. ........ r47137 | neal.norwitz | 2006-06-28 07:03:22 +0200 (Wed, 28 Jun 2006) | 4 lines According to the man pages on Gentoo Linux and Tru64, EACCES or EAGAIN can be returned if fcntl (lockf) fails. This fixes the test failure on Tru64 by checking for either error rather than just EAGAIN. ........ r47139 | neal.norwitz | 2006-06-28 08:28:31 +0200 (Wed, 28 Jun 2006) | 5 lines Fix bug #1512695: cPickle.loads could crash if it was interrupted with a KeyboardInterrupt since PyTuple_Pack was passed a NULL. Will backport. ........ r47142 | nick.coghlan | 2006-06-28 12:41:47 +0200 (Wed, 28 Jun 2006) | 1 line Make full module name available as __module_name__ even when __name__ is set to something else (like '__main__') ........ r47143 | armin.rigo | 2006-06-28 12:49:51 +0200 (Wed, 28 Jun 2006) | 2 lines A couple of crashers of the "won't fix" kind. ........ r47147 | andrew.kuchling | 2006-06-28 16:25:20 +0200 (Wed, 28 Jun 2006) | 1 line [Bug #1508766] Add docs for uuid module; docs written by George Yoshida, with minor rearrangements by me. ........ r47148 | andrew.kuchling | 2006-06-28 16:27:21 +0200 (Wed, 28 Jun 2006) | 1 line [Bug #1508766] Add docs for uuid module; this puts the module in the 'Internet Protocols' section. Arguably this module could also have gone in the chapters on strings or encodings, maybe even the crypto chapter. Fred, please move if you see fit. ........ r47151 | georg.brandl | 2006-06-28 22:23:25 +0200 (Wed, 28 Jun 2006) | 3 lines Fix end_fill(). ........ r47153 | trent.mick | 2006-06-28 22:30:41 +0200 (Wed, 28 Jun 2006) | 2 lines Mention the expat upgrade and pyexpat fix I put in 2.5b1. ........ r47154 | fred.drake | 2006-06-29 02:51:53 +0200 (Thu, 29 Jun 2006) | 6 lines SF bug #1504333: sgmlib should allow angle brackets in quoted values (modified patch by Sam Ruby; changed to use separate REs for start and end tags to reduce matching cost for end tags; extended tests; updated to avoid breaking previous changes to support IPv6 addresses in unquoted attribute values) ........ r47156 | fred.drake | 2006-06-29 04:57:48 +0200 (Thu, 29 Jun 2006) | 1 line document recent bugfixes in sgmllib ........ r47158 | neal.norwitz | 2006-06-29 06:10:08 +0200 (Thu, 29 Jun 2006) | 10 lines Add new utility function, reap_children(), to test_support. This should be called at the end of each test that spawns children (perhaps it should be called from regrtest instead?). This will hopefully prevent some of the unexplained failures in the buildbots (hppa and alpha) during tests that spawn children. The problems were not reproducible. There were many zombies that remained at the end of several tests. In the worst case, this shouldn't cause any more problems, though it may not help either. Time will tell. ........ r47159 | neal.norwitz | 2006-06-29 07:48:14 +0200 (Thu, 29 Jun 2006) | 5 lines This should fix the buildbot failure on s/390 which can't connect to gmail.org. It makes the error message consistent and always sends to stderr. It would be much better for all the networking tests to hit only python.org. ........ r47161 | thomas.heller | 2006-06-29 20:34:15 +0200 (Thu, 29 Jun 2006) | 3 lines Protect the thread api calls in the _ctypes extension module within #ifdef WITH_THREADS/#endif blocks. Found by Sam Rushing. ........ r47162 | martin.v.loewis | 2006-06-29 20:58:44 +0200 (Thu, 29 Jun 2006) | 2 lines Patch #1509163: MS Toolkit Compiler no longer available ........ r47163 | skip.montanaro | 2006-06-29 21:20:09 +0200 (Thu, 29 Jun 2006) | 1 line add string methods to index ........ r47164 | vinay.sajip | 2006-06-30 02:13:08 +0200 (Fri, 30 Jun 2006) | 1 line Fixed bug in fileConfig() which failed to clear logging._handlerList ........ r47166 | tim.peters | 2006-06-30 08:18:39 +0200 (Fri, 30 Jun 2006) | 2 lines Whitespace normalization. ........ r47170 | neal.norwitz | 2006-06-30 09:32:16 +0200 (Fri, 30 Jun 2006) | 1 line Silence compiler warning ........ r47171 | neal.norwitz | 2006-06-30 09:32:46 +0200 (Fri, 30 Jun 2006) | 1 line Another problem reported by Coverity. Backport candidate. ........ r47175 | thomas.heller | 2006-06-30 19:44:54 +0200 (Fri, 30 Jun 2006) | 2 lines Revert the use of PY_FORMAT_SIZE_T in PyErr_Format. ........ r47176 | tim.peters | 2006-06-30 20:34:51 +0200 (Fri, 30 Jun 2006) | 2 lines Remove now-unused fidding with PY_FORMAT_SIZE_T. ........ r47177 | georg.brandl | 2006-06-30 20:47:56 +0200 (Fri, 30 Jun 2006) | 3 lines Document decorator usage of property. ........ r47181 | fred.drake | 2006-06-30 21:29:25 +0200 (Fri, 30 Jun 2006) | 4 lines - consistency nit: always include "()" in \function and \method (*should* be done by the presentation, but that requires changes all over) - avoid spreading the __name meme ........ r47188 | vinay.sajip | 2006-07-01 12:45:20 +0200 (Sat, 01 Jul 2006) | 1 line Added entry for fileConfig() bugfix. ........ r47189 | vinay.sajip | 2006-07-01 12:47:20 +0200 (Sat, 01 Jul 2006) | 1 line Added duplicate call to fileConfig() to ensure that it cleans up after itself correctly. ........ r47190 | martin.v.loewis | 2006-07-01 17:33:37 +0200 (Sat, 01 Jul 2006) | 2 lines Release all forwarded functions in .close. Fixes #1513223. ........ r47191 | fred.drake | 2006-07-01 18:28:20 +0200 (Sat, 01 Jul 2006) | 7 lines SF bug #1296433 (Expat bug #1515266): Unchecked calls to character data handler would cause a segfault. This merges in Expat's lib/xmlparse.c revisions 1.154 and 1.155, which fix this and a closely related problem (the later does not affect Python). Moved the crasher test to the tests for xml.parsers.expat. ........ r47197 | gerhard.haering | 2006-07-02 19:48:30 +0200 (Sun, 02 Jul 2006) | 4 lines The sqlite3 module did cut off data from the SQLite database at the first null character before sending it to a custom converter. This has been fixed now. ........ r47198 | martin.v.loewis | 2006-07-02 20:44:00 +0200 (Sun, 02 Jul 2006) | 1 line Correct arithmetic in access on Win32. Fixes #1513646. ........ r47203 | thomas.heller | 2006-07-03 09:58:09 +0200 (Mon, 03 Jul 2006) | 1 line Cleanup: Remove commented out code. ........ r47204 | thomas.heller | 2006-07-03 09:59:50 +0200 (Mon, 03 Jul 2006) | 1 line Don't run the doctests with Python 2.3 because it doesn't have the ELLIPSIS flag. ........ r47205 | thomas.heller | 2006-07-03 10:04:05 +0200 (Mon, 03 Jul 2006) | 7 lines Fixes so that _ctypes can be compiled with the MingW compiler. It seems that the definition of '__attribute__(x)' was responsible for the compiler ignoring the '__fastcall' attribute on the ffi_closure_SYSV function in libffi_msvc/ffi.c, took me quite some time to figure this out. ........ r47206 | thomas.heller | 2006-07-03 10:08:14 +0200 (Mon, 03 Jul 2006) | 11 lines Add a new function uses_seh() to the _ctypes extension module. This will return True if Windows Structured Exception handling (SEH) is used when calling functions, False otherwise. Currently, only MSVC supports SEH. Fix the test so that it doesn't crash when run with MingW compiled _ctypes. Note that two tests are still failing when mingw is used, I suspect structure layout differences and function calling conventions between MSVC and MingW. ........ r47207 | tim.peters | 2006-07-03 10:23:19 +0200 (Mon, 03 Jul 2006) | 2 lines Whitespace normalization. ........ r47208 | martin.v.loewis | 2006-07-03 11:44:00 +0200 (Mon, 03 Jul 2006) | 3 lines Only setup canvas when it is first created. Fixes #1514703 ........ r47209 | martin.v.loewis | 2006-07-03 12:05:30 +0200 (Mon, 03 Jul 2006) | 3 lines Reimplement turtle.circle using a polyline, to allow correct filling of arcs. Also fixes #1514693. ........ r47210 | martin.v.loewis | 2006-07-03 12:19:49 +0200 (Mon, 03 Jul 2006) | 3 lines Bug #1514693: Update turtle's heading when switching between degrees and radians. ........ r47211 | martin.v.loewis | 2006-07-03 13:12:06 +0200 (Mon, 03 Jul 2006) | 2 lines Document functions added in 2.3 and 2.5. ........ r47212 | martin.v.loewis | 2006-07-03 14:19:50 +0200 (Mon, 03 Jul 2006) | 3 lines Bug #1417699: Reject locale-specific decimal point in float() and atof(). ........ r47213 | martin.v.loewis | 2006-07-03 14:28:58 +0200 (Mon, 03 Jul 2006) | 3 lines Bug #1267547: Put proper recursive setup.py call into the spec file generated by bdist_rpm. ........ r47215 | martin.v.loewis | 2006-07-03 15:01:35 +0200 (Mon, 03 Jul 2006) | 3 lines Patch #825417: Fix timeout processing in expect, read_until. Will backport to 2.4. ........ r47218 | martin.v.loewis | 2006-07-03 15:47:40 +0200 (Mon, 03 Jul 2006) | 2 lines Put method-wrappers into trashcan. Fixes #927248. ........ r47219 | andrew.kuchling | 2006-07-03 16:07:30 +0200 (Mon, 03 Jul 2006) | 1 line [Bug #1515932] Clarify description of slice assignment ........ r47220 | andrew.kuchling | 2006-07-03 16:16:09 +0200 (Mon, 03 Jul 2006) | 4 lines [Bug #1511911] Clarify description of optional arguments to sorted() by improving the xref to the section on lists, and by copying the explanations of the arguments (with a slight modification). ........ r47223 | kristjan.jonsson | 2006-07-03 16:59:05 +0200 (Mon, 03 Jul 2006) | 1 line Fix build problems with the platform SDK on windows. It is not sufficient to test for the C compiler version when determining if we have the secure CRT from microsoft. Must test with an undocumented macro, __STDC_SECURE_LIB__ too. ........ r47224 | ronald.oussoren | 2006-07-04 14:30:22 +0200 (Tue, 04 Jul 2006) | 7 lines Sync the darwin/x86 port libffi with the copy in PyObjC. This fixes a number of bugs in that port. The most annoying ones were due to some subtle differences between the document ABI and the actual implementation :-( (there are no python unittests that fail without this patch, but without it some of libffi's unittests fail). ........ r47234 | georg.brandl | 2006-07-05 10:21:00 +0200 (Wed, 05 Jul 2006) | 3 lines Remove remaining references to OverflowWarning. ........ r47236 | thomas.heller | 2006-07-05 11:13:56 +0200 (Wed, 05 Jul 2006) | 3 lines Fix the bitfield test when _ctypes is compiled with MingW. Structures containing bitfields may have different layout on MSVC and MingW . ........ r47237 | thomas.wouters | 2006-07-05 13:03:49 +0200 (Wed, 05 Jul 2006) | 15 lines Fix bug in passing tuples to string.Template. All other values (with working str() or repr()) would work, just not multi-value tuples. Probably not a backport candidate, since it changes the behaviour of passing a single-element tuple: >>> string.Template("$foo").substitute(dict(foo=(1,))) '(1,)' versus '1' ........ r47241 | georg.brandl | 2006-07-05 16:18:45 +0200 (Wed, 05 Jul 2006) | 2 lines Patch #1517490: fix glitches in filter() docs. ........ r47244 | georg.brandl | 2006-07-05 17:50:05 +0200 (Wed, 05 Jul 2006) | 2 lines no need to elaborate "string". ........ r47251 | neal.norwitz | 2006-07-06 06:28:59 +0200 (Thu, 06 Jul 2006) | 3 lines Fix refleaks reported by Shane Hathaway in SF patch #1515361. This change contains only the changes related to leaking the copy variable. ........ r47253 | fred.drake | 2006-07-06 07:13:22 +0200 (Thu, 06 Jul 2006) | 4 lines - back out Expat change; the final fix to Expat will be different - change the pyexpat wrapper to not be so sensitive to this detail of the Expat implementation (the ex-crasher test still passes) ........ r47257 | neal.norwitz | 2006-07-06 08:45:08 +0200 (Thu, 06 Jul 2006) | 1 line Add a NEWS entry for a recent pyexpat fix ........ r47258 | martin.v.loewis | 2006-07-06 08:55:58 +0200 (Thu, 06 Jul 2006) | 2 lines Add sqlite3.dll to the DLLs component, not to the TkDLLs component. Fixes #1517388. ........ r47259 | martin.v.loewis | 2006-07-06 09:05:21 +0200 (Thu, 06 Jul 2006) | 1 line Properly quote compileall and Lib paths in case TARGETDIR has a space. ........ r47260 | thomas.heller | 2006-07-06 09:50:18 +0200 (Thu, 06 Jul 2006) | 5 lines Revert the change done in svn revision 47206: Add a new function uses_seh() to the _ctypes extension module. This will return True if Windows Structured Exception handling (SEH) is used when calling functions, False otherwise. ........ r47261 | armin.rigo | 2006-07-06 09:58:18 +0200 (Thu, 06 Jul 2006) | 3 lines A couple of examples about how to attack the fact that _PyType_Lookup() returns a borrowed ref. Many of the calls are open to attack. ........ r47262 | thomas.heller | 2006-07-06 10:28:14 +0200 (Thu, 06 Jul 2006) | 2 lines The test that calls a function with invalid arguments and catches the resulting Windows access violation will not be run by default. ........ r47263 | thomas.heller | 2006-07-06 10:48:35 +0200 (Thu, 06 Jul 2006) | 5 lines Patch #1517790: It is now possible to use custom objects in the ctypes foreign function argtypes sequence as long as they provide a from_param method, no longer is it required that the object is a ctypes type. ........ r47264 | thomas.heller | 2006-07-06 10:58:40 +0200 (Thu, 06 Jul 2006) | 2 lines Document the Struture and Union constructors. ........ r47265 | thomas.heller | 2006-07-06 11:11:22 +0200 (Thu, 06 Jul 2006) | 2 lines Document the changes in svn revision 47263, from patch #1517790. ........ r47267 | ronald.oussoren | 2006-07-06 12:13:35 +0200 (Thu, 06 Jul 2006) | 7 lines This patch solves the problem Skip was seeing with zlib, this patch ensures that configure uses similar compiler flags as setup.py when doing the zlib test. Without this patch configure would use the first shared library on the linker path, with this patch it uses the first shared or static library on that path just like setup.py. ........ r47268 | thomas.wouters | 2006-07-06 12:48:28 +0200 (Thu, 06 Jul 2006) | 4 lines NEWS entry for r47267: fixing configure's zlib probing. ........ r47269 | fredrik.lundh | 2006-07-06 14:29:24 +0200 (Thu, 06 Jul 2006) | 3 lines added XMLParser alias for cElementTree compatibility ........ r47271 | nick.coghlan | 2006-07-06 14:53:04 +0200 (Thu, 06 Jul 2006) | 1 line Revert the __module_name__ changes made in rev 47142. We'll revisit this in Python 2.6 ........ r47272 | nick.coghlan | 2006-07-06 15:04:56 +0200 (Thu, 06 Jul 2006) | 1 line Update the tutorial section on relative imports ........ r47273 | nick.coghlan | 2006-07-06 15:35:27 +0200 (Thu, 06 Jul 2006) | 1 line Ignore ImportWarning by default ........ r47274 | nick.coghlan | 2006-07-06 15:41:34 +0200 (Thu, 06 Jul 2006) | 1 line Cover ImportWarning, PendingDeprecationWarning and simplefilter() in the warnings module docs ........ r47275 | nick.coghlan | 2006-07-06 15:47:18 +0200 (Thu, 06 Jul 2006) | 1 line Add NEWS entries for the ImportWarning change and documentation update ........ r47276 | andrew.kuchling | 2006-07-06 15:57:28 +0200 (Thu, 06 Jul 2006) | 1 line ImportWarning is now silent by default ........ r47277 | thomas.heller | 2006-07-06 17:06:05 +0200 (Thu, 06 Jul 2006) | 2 lines Document the correct return type of PyLong_AsUnsignedLongLongMask. ........ r47278 | hyeshik.chang | 2006-07-06 17:21:52 +0200 (Thu, 06 Jul 2006) | 2 lines Add a testcase for r47086 which fixed a bug in codec_getstreamcodec(). ........ r47279 | hyeshik.chang | 2006-07-06 17:39:24 +0200 (Thu, 06 Jul 2006) | 3 lines Test using all CJK encodings for the testcases which don't require specific encodings. ........ r47280 | martin.v.loewis | 2006-07-06 21:28:03 +0200 (Thu, 06 Jul 2006) | 2 lines Properly generate logical file ids. Fixes #1515998. Also correct typo in Control.mapping. ........ r47287 | neal.norwitz | 2006-07-07 08:03:15 +0200 (Fri, 07 Jul 2006) | 17 lines Restore rev 47014: The hppa ubuntu box sometimes hangs forever in these tests. My guess is that the wait is failing for some reason. Use WNOHANG, so we won't wait until the buildbot kills the test suite. I haven't been able to reproduce the failure, so I'm not sure if this will help or not. Hopefully, this change will cause the test to fail, rather than hang. That will be better since we will get the rest of the test results. It may also help us debug the real problem. *** The reason this originally failed was because there were many zombie children outstanding before rev 47158 cleaned them up. There are still hangs in test_subprocess that need to be addressed, but that will take more work. This should close some holes. ........ r47289 | georg.brandl | 2006-07-07 10:15:12 +0200 (Fri, 07 Jul 2006) | 3 lines Fix RFC number. ........ r50489 | neal.norwitz | 2006-07-08 07:31:37 +0200 (Sat, 08 Jul 2006) | 1 line Fix SF bug #1519018: 'as' is now validated properly in import statements ........ r50490 | georg.brandl | 2006-07-08 14:15:27 +0200 (Sat, 08 Jul 2006) | 3 lines Add an additional test for bug #1519018. ........ r50491 | tim.peters | 2006-07-08 21:55:05 +0200 (Sat, 08 Jul 2006) | 2 lines Whitespace normalization. ........ r50493 | neil.schemenauer | 2006-07-09 18:16:34 +0200 (Sun, 09 Jul 2006) | 2 lines Fix AST compiler bug #1501934: incorrect LOAD/STORE_GLOBAL generation. ........ r50495 | neil.schemenauer | 2006-07-09 23:19:29 +0200 (Sun, 09 Jul 2006) | 2 lines Fix SF bug 1441486: bad unary minus folding in compiler. ........ r50497 | neal.norwitz | 2006-07-10 00:14:42 +0200 (Mon, 10 Jul 2006) | 4 lines On 64 bit systems, int literals that use less than 64 bits are now ints rather than longs. This also fixes the test for eval(-sys.maxint - 1). ........ r50500 | neal.norwitz | 2006-07-10 02:04:44 +0200 (Mon, 10 Jul 2006) | 4 lines Bug #1512814, Fix incorrect lineno's when code at module scope started after line 256. ........ r50501 | neal.norwitz | 2006-07-10 02:05:34 +0200 (Mon, 10 Jul 2006) | 1 line Fix doco. Backport candidate. ........ r50503 | neal.norwitz | 2006-07-10 02:23:17 +0200 (Mon, 10 Jul 2006) | 5 lines Part of SF patch #1484695. This removes dead code. The chksum was already verified in .frombuf() on the lines above. If there was a problem an exception is raised, so there was no way this condition could have been true. ........ r50504 | neal.norwitz | 2006-07-10 03:18:57 +0200 (Mon, 10 Jul 2006) | 3 lines Patch #1516912: improve Modules support for OpenVMS. ........ r50506 | neal.norwitz | 2006-07-10 04:36:41 +0200 (Mon, 10 Jul 2006) | 7 lines Patch #1504046: Add documentation for xml.etree. /F wrote the text docs, Englebert Gruber massaged it to latex and I did some more massaging to try and improve the consistency and fix some name mismatches between the declaration and text. ........ r50509 | martin.v.loewis | 2006-07-10 09:23:48 +0200 (Mon, 10 Jul 2006) | 2 lines Introduce DISTUTILS_USE_SDK as a flag to determine whether the SDK environment should be used. Fixes #1508010. ........ r50510 | martin.v.loewis | 2006-07-10 09:26:41 +0200 (Mon, 10 Jul 2006) | 1 line Change error message to indicate that VS2003 is necessary to build extension modules, not the .NET SDK. ........ r50511 | martin.v.loewis | 2006-07-10 09:29:41 +0200 (Mon, 10 Jul 2006) | 1 line Add svn:ignore. ........ r50512 | anthony.baxter | 2006-07-10 09:41:04 +0200 (Mon, 10 Jul 2006) | 1 line preparing for 2.5b2 ........ r50513 | thomas.heller | 2006-07-10 11:10:28 +0200 (Mon, 10 Jul 2006) | 2 lines Fix bug #1518190: accept any integer or long value in the ctypes.c_void_p constructor. ........ r50514 | thomas.heller | 2006-07-10 11:31:06 +0200 (Mon, 10 Jul 2006) | 3 lines Fixed a segfault when ctypes.wintypes were imported on non-Windows machines. ........ r50516 | thomas.heller | 2006-07-10 13:11:10 +0200 (Mon, 10 Jul 2006) | 3 lines Assigning None to pointer type structure fields possible overwrote wrong fields. ........ r50517 | thomas.heller | 2006-07-10 13:17:37 +0200 (Mon, 10 Jul 2006) | 5 lines Moved the ctypes news entries from the 'Library' section into the 'Extension Modules' section where they belong, probably. This destroyes the original order of the news entries, don't know if that is important or not. ........ r50526 | phillip.eby | 2006-07-10 21:03:29 +0200 (Mon, 10 Jul 2006) | 2 lines Fix SF#1516184 and add a test to prevent regression. ........ r50528 | phillip.eby | 2006-07-10 21:18:35 +0200 (Mon, 10 Jul 2006) | 2 lines Fix SF#1457312: bad socket error handling in distutils "upload" command. ........ r50537 | peter.astrand | 2006-07-10 22:39:49 +0200 (Mon, 10 Jul 2006) | 1 line Make it possible to run test_subprocess.py with Python 2.2, which lacks test_support.reap_children(). ........ r50541 | tim.peters | 2006-07-10 23:08:24 +0200 (Mon, 10 Jul 2006) | 5 lines After approval from Anthony, merge the tim-current_frames branch into the trunk. This adds a new sys._current_frames() function, which returns a dict mapping thread id to topmost thread stack frame. ........ r50542 | tim.peters | 2006-07-10 23:11:49 +0200 (Mon, 10 Jul 2006) | 2 lines Whitespace normalization. ........ r50553 | martin.v.loewis | 2006-07-11 00:11:28 +0200 (Tue, 11 Jul 2006) | 4 lines Patch #1519566: Remove unused _tofill member. Make begin_fill idempotent. Update demo2 to demonstrate filling of concave shapes. ........ r50567 | anthony.baxter | 2006-07-11 04:04:09 +0200 (Tue, 11 Jul 2006) | 4 lines #1494314: Fix a regression with high-numbered sockets in 2.4.3. This means that select() on sockets > FD_SETSIZE (typically 1024) work again. The patch makes sockets use poll() internally where available. ........ r50568 | tim.peters | 2006-07-11 04:17:48 +0200 (Tue, 11 Jul 2006) | 2 lines Whitespace normalization. ........ r50575 | thomas.heller | 2006-07-11 18:42:05 +0200 (Tue, 11 Jul 2006) | 1 line Add missing Py_DECREF. ........ r50576 | thomas.heller | 2006-07-11 18:44:25 +0200 (Tue, 11 Jul 2006) | 1 line Add missing Py_DECREFs. ........ r50579 | andrew.kuchling | 2006-07-11 19:20:16 +0200 (Tue, 11 Jul 2006) | 1 line Bump version number; add sys._current_frames ........ r50582 | thomas.heller | 2006-07-11 20:28:35 +0200 (Tue, 11 Jul 2006) | 3 lines When a foreign function is retrived by calling __getitem__ on a ctypes library instance, do not set it as attribute. ........ r50583 | thomas.heller | 2006-07-11 20:40:50 +0200 (Tue, 11 Jul 2006) | 2 lines Change the ctypes version number to 1.0.0. ........ r50597 | neal.norwitz | 2006-07-12 07:26:17 +0200 (Wed, 12 Jul 2006) | 3 lines Bug #1520864: unpacking singleton tuples in for loop (for x, in) work again. ........ r50598 | neal.norwitz | 2006-07-12 07:26:35 +0200 (Wed, 12 Jul 2006) | 1 line Fix function name in error msg ........ r50599 | neal.norwitz | 2006-07-12 07:27:46 +0200 (Wed, 12 Jul 2006) | 4 lines Fix uninitialized memory read reported by Valgrind when running doctest. This could happen if size == 0. ........ r50600 | neal.norwitz | 2006-07-12 09:28:29 +0200 (Wed, 12 Jul 2006) | 1 line Actually change the MAGIC #. Create a new section for 2.5c1 and mention the impact of changing the MAGIC #. ........ r50601 | thomas.heller | 2006-07-12 10:43:47 +0200 (Wed, 12 Jul 2006) | 3 lines Fix #1467450: ctypes now uses RTLD_GLOBAL by default on OSX 10.3 to load shared libraries. ........ r50604 | thomas.heller | 2006-07-12 16:25:18 +0200 (Wed, 12 Jul 2006) | 3 lines Fix the wrong description of LibraryLoader.LoadLibrary, and document the DEFAULT_MODE constant. ........ r50607 | georg.brandl | 2006-07-12 17:31:17 +0200 (Wed, 12 Jul 2006) | 3 lines Accept long options "--help" and "--version". ........ r50617 | thomas.heller | 2006-07-13 11:53:47 +0200 (Thu, 13 Jul 2006) | 3 lines A misspelled preprocessor symbol caused ctypes to be always compiled without thread support. Replaced WITH_THREADS with WITH_THREAD. ........ r50619 | thomas.heller | 2006-07-13 19:01:14 +0200 (Thu, 13 Jul 2006) | 3 lines Fix #1521375. When running with root priviledges, 'gcc -o /dev/null' did overwrite /dev/null. Use a temporary file instead of /dev/null. ........ r50620 | thomas.heller | 2006-07-13 19:05:13 +0200 (Thu, 13 Jul 2006) | 2 lines Fix misleading words. ........ r50622 | andrew.kuchling | 2006-07-13 19:37:26 +0200 (Thu, 13 Jul 2006) | 1 line Typo fix ........ r50629 | georg.brandl | 2006-07-14 09:12:54 +0200 (Fri, 14 Jul 2006) | 3 lines Patch #1521874: grammar errors in doanddont.tex. ........ r50630 | neal.norwitz | 2006-07-14 09:20:04 +0200 (Fri, 14 Jul 2006) | 1 line Try to improve grammar further. ........ r50631 | martin.v.loewis | 2006-07-14 11:58:55 +0200 (Fri, 14 Jul 2006) | 1 line Extend build_ssl to Win64, using VSExtComp. ........ r50632 | martin.v.loewis | 2006-07-14 14:10:09 +0200 (Fri, 14 Jul 2006) | 1 line Add debug output to analyse buildbot failure. ........ r50633 | martin.v.loewis | 2006-07-14 14:31:05 +0200 (Fri, 14 Jul 2006) | 1 line Fix Debug build of _ssl. ........ r50636 | andrew.kuchling | 2006-07-14 15:32:38 +0200 (Fri, 14 Jul 2006) | 1 line Mention new options ........ r50638 | peter.astrand | 2006-07-14 16:04:45 +0200 (Fri, 14 Jul 2006) | 1 line Bug #1223937: CalledProcessError.errno -> CalledProcessError.returncode. ........ r50640 | thomas.heller | 2006-07-14 17:01:05 +0200 (Fri, 14 Jul 2006) | 4 lines Make the prototypes of our private PyUnicode_FromWideChar and PyUnicode_AsWideChar replacement functions compatible to the official functions by using Py_ssize_t instead of int. ........ r50643 | thomas.heller | 2006-07-14 19:51:14 +0200 (Fri, 14 Jul 2006) | 3 lines Patch #1521817: The index range checking on ctypes arrays containing exactly one element is enabled again. ........ r50647 | thomas.heller | 2006-07-14 20:22:50 +0200 (Fri, 14 Jul 2006) | 2 lines Updates for the ctypes documentation. ........ r50655 | fredrik.lundh | 2006-07-14 23:45:48 +0200 (Fri, 14 Jul 2006) | 3 lines typo ........ r50664 | george.yoshida | 2006-07-15 18:03:49 +0200 (Sat, 15 Jul 2006) | 2 lines Bug #15187702 : ext/win-cookbook.html has a broken link to distutils ........ r50667 | bob.ippolito | 2006-07-15 18:53:15 +0200 (Sat, 15 Jul 2006) | 1 line Patch #1220874: Update the binhex module for Mach-O. ........ r50671 | fred.drake | 2006-07-16 03:21:20 +0200 (Sun, 16 Jul 2006) | 1 line clean up some link markup ........ r50673 | neal.norwitz | 2006-07-16 03:50:38 +0200 (Sun, 16 Jul 2006) | 4 lines Bug #1512814, Fix incorrect lineno's when code within a function had more than 255 blank lines. Byte codes need to go first, line #s second. ........ r50674 | neal.norwitz | 2006-07-16 04:00:32 +0200 (Sun, 16 Jul 2006) | 5 lines a & b were dereffed above, so they are known to be valid pointers. z is known to be NULL, nothing to DECREF. Reported by Klockwork, #107. ........ r50675 | neal.norwitz | 2006-07-16 04:02:57 +0200 (Sun, 16 Jul 2006) | 5 lines self is dereffed (and passed as first arg), so it's known to be good. func is returned from PyArg_ParseTuple and also dereffed. Reported by Klocwork, #30 (self one at least). ........ r50676 | neal.norwitz | 2006-07-16 04:05:35 +0200 (Sun, 16 Jul 2006) | 4 lines proto was dereffed above and is known to be good. No need for X. Reported by Klocwork, #39. ........ r50677 | neal.norwitz | 2006-07-16 04:15:27 +0200 (Sun, 16 Jul 2006) | 5 lines Fix memory leaks in some conditions. Reported by Klocwork #152. ........ r50678 | neal.norwitz | 2006-07-16 04:17:36 +0200 (Sun, 16 Jul 2006) | 4 lines Fix memory leak under some conditions. Reported by Klocwork, #98. ........ r50679 | neal.norwitz | 2006-07-16 04:22:30 +0200 (Sun, 16 Jul 2006) | 8 lines Use sizeof(buffer) instead of duplicating the constants to ensure they won't be wrong. The real change is to pass (bufsz - 1) to PyOS_ascii_formatd and 1 to strncat. strncat copies n+1 bytes from src (not dest). Reported by Klocwork #58. ........ r50680 | neal.norwitz | 2006-07-16 04:32:03 +0200 (Sun, 16 Jul 2006) | 5 lines Handle a NULL name properly. Reported by Klocwork #67 ........ r50681 | neal.norwitz | 2006-07-16 04:35:47 +0200 (Sun, 16 Jul 2006) | 6 lines PyFunction_SetDefaults() is documented as taking None or a tuple. A NULL would crash the PyTuple_Check(). Now make NULL return a SystemError. Reported by Klocwork #73. ........ r50683 | neal.norwitz | 2006-07-17 02:55:45 +0200 (Mon, 17 Jul 2006) | 5 lines Stop INCREFing name, then checking if it's NULL. name (f_name) should never be NULL so assert it. Fix one place where we could have passed NULL. Reported by Klocwork #66. ........ r50684 | neal.norwitz | 2006-07-17 02:57:15 +0200 (Mon, 17 Jul 2006) | 5 lines otherset is known to be non-NULL based on checks before and DECREF after. DECREF otherset rather than XDECREF in error conditions too. Reported by Klockwork #154. ........ r50685 | neal.norwitz | 2006-07-17 02:59:04 +0200 (Mon, 17 Jul 2006) | 7 lines Reported by Klocwork #151. v2 can be NULL if exception2 is NULL. I don't think that condition can happen, but I'm not sure it can't either. Now the code will protect against either being NULL. ........ r50686 | neal.norwitz | 2006-07-17 03:00:16 +0200 (Mon, 17 Jul 2006) | 1 line Add NEWS entry for a bunch of fixes due to warnings produced by Klocworks static analysis tool. ........ r50687 | fred.drake | 2006-07-17 07:47:52 +0200 (Mon, 17 Jul 2006) | 3 lines document xmlcore (still minimal; needs mention in each of the xml.* modules) SF bug #1504456 (partial) ........ r50688 | georg.brandl | 2006-07-17 15:23:46 +0200 (Mon, 17 Jul 2006) | 3 lines Remove usage of sets module (patch #1500609). ........ r50689 | georg.brandl | 2006-07-17 15:26:33 +0200 (Mon, 17 Jul 2006) | 3 lines Add missing NEWS item (#1522771) ........ r50690 | andrew.kuchling | 2006-07-17 18:47:54 +0200 (Mon, 17 Jul 2006) | 1 line Attribute more features ........ r50692 | kurt.kaiser | 2006-07-17 23:59:27 +0200 (Mon, 17 Jul 2006) | 8 lines Patch 1479219 - Tal Einat 1. 'as' highlighted as builtin in comment string on import line 2. Comments such as "#False identity" which start with a keyword immediately after the '#' character aren't colored as comments. 3. u or U beginning unicode string not correctly highlighted Closes bug 1325071 ........ r50693 | barry.warsaw | 2006-07-18 01:07:51 +0200 (Tue, 18 Jul 2006) | 16 lines decode_rfc2231(): Be more robust against buggy RFC 2231 encodings. Specifically, instead of raising a ValueError when there is a single tick in the parameter, simply return that the entire string unquoted, with None for both the charset and the language. Also, if there are more than 2 ticks in the parameter, interpret the first three parts as the standard RFC 2231 parts, then the rest of the parts as the encoded string. Test cases added. Original fewer-than-3-parts fix by Tokio Kikuchi. Resolves SF bug # 1218081. I will back port the fix and tests to Python 2.4 (email 3.0) and Python 2.3 (email 2.5). Also, bump the version number to email 4.0.1, removing the 'alpha' moniker. ........ r50695 | kurt.kaiser | 2006-07-18 06:03:16 +0200 (Tue, 18 Jul 2006) | 2 lines Rebinding Tab key was inserting 'tab' instead of 'Tab'. Bug 1179168. ........ r50696 | brett.cannon | 2006-07-18 06:41:36 +0200 (Tue, 18 Jul 2006) | 6 lines Fix bug #1520914. Starting in 2.4, time.strftime() began to check the bounds of values in the time tuple passed in. Unfortunately people came to rely on undocumented behaviour of setting unneeded values to 0, regardless of if it was within the valid range. Now those values force the value internally to the minimum value when 0 is passed in. ........ r50697 | facundo.batista | 2006-07-18 14:16:13 +0200 (Tue, 18 Jul 2006) | 1 line Comments and docs cleanups, and some little fixes, provided by Santiágo Peresón ........ r50704 | martin.v.loewis | 2006-07-18 19:46:31 +0200 (Tue, 18 Jul 2006) | 2 lines Patch #1524429: Use repr instead of backticks again. ........ r50706 | tim.peters | 2006-07-18 23:55:15 +0200 (Tue, 18 Jul 2006) | 2 lines Whitespace normalization. ........ r50708 | tim.peters | 2006-07-19 02:03:19 +0200 (Wed, 19 Jul 2006) | 18 lines SF bug 1524317: configure --without-threads fails to build Moved the code for _PyThread_CurrentFrames() up, so it's no longer in a huge "#ifdef WITH_THREAD" block (I didn't realize it /was/ in one). Changed test_sys's test_current_frames() so it passes with or without thread supported compiled in. Note that test_sys fails when Python is compiled without threads, but for an unrelated reason (the old test_exit() fails with an indirect ImportError on the `thread` module). There are also other unrelated compilation failures without threads, in extension modules (like ctypes); at least the core compiles again. Do we really support --without-threads? If so, there are several problems remaining. ........ r50713 | thomas.heller | 2006-07-19 11:09:32 +0200 (Wed, 19 Jul 2006) | 4 lines Make sure the _ctypes extension can be compiled when WITH_THREAD is not defined on Windows, even if that configuration is probably not supported at all. ........ r50715 | martin.v.loewis | 2006-07-19 19:18:32 +0200 (Wed, 19 Jul 2006) | 4 lines Revert r50706 (Whitespace normalization) and r50697: Comments and docs cleanups, and some little fixes per recommendation from Raymond Hettinger. ........ r50719 | phillip.eby | 2006-07-20 17:54:16 +0200 (Thu, 20 Jul 2006) | 4 lines Fix SF#1516184 (again) and add a test to prevent regression. (There was a problem with empty filenames still causing recursion) ........ r50720 | georg.brandl | 2006-07-20 18:28:39 +0200 (Thu, 20 Jul 2006) | 3 lines Guard for _active being None in __del__ method. ........ r50721 | vinay.sajip | 2006-07-20 18:28:39 +0200 (Thu, 20 Jul 2006) | 1 line Updated documentation for TimedRotatingFileHandler relating to how rollover files are named. The previous documentation was wrongly the same as for RotatingFileHandler. ........ r50731 | fred.drake | 2006-07-20 22:11:57 +0200 (Thu, 20 Jul 2006) | 1 line markup fix ........ r50739 | kurt.kaiser | 2006-07-21 00:22:52 +0200 (Fri, 21 Jul 2006) | 7 lines Avoid occasional failure to detect closing paren properly. Patch 1407280 Tal Einat M ParenMatch.py M NEWS.txt M CREDITS.txt ........ r50740 | vinay.sajip | 2006-07-21 01:20:12 +0200 (Fri, 21 Jul 2006) | 1 line Addressed SF#1524081 by using a dictionary to map level names to syslog priority names, rather than a string.lower(). ........ r50741 | neal.norwitz | 2006-07-21 07:29:58 +0200 (Fri, 21 Jul 2006) | 1 line Add some asserts that we got good params passed ........ r50742 | neal.norwitz | 2006-07-21 07:31:02 +0200 (Fri, 21 Jul 2006) | 5 lines Move the initialization of some pointers earlier. The problem is that if we call Py_DECREF(frame) like we do if allocating locals fails, frame_dealloc() will try to use these bogus values and crash. ........ r50743 | neal.norwitz | 2006-07-21 07:32:28 +0200 (Fri, 21 Jul 2006) | 4 lines Handle allocation failures gracefully. Found with failmalloc. Many (all?) of these could be backported. ........ r50745 | neal.norwitz | 2006-07-21 09:59:02 +0200 (Fri, 21 Jul 2006) | 1 line Speel initialise write. Tanks Anthony. ........ r50746 | neal.norwitz | 2006-07-21 09:59:47 +0200 (Fri, 21 Jul 2006) | 2 lines Handle more memory allocation failures without crashing. ........ r50754 | barry.warsaw | 2006-07-21 16:51:07 +0200 (Fri, 21 Jul 2006) | 23 lines More RFC 2231 improvements for the email 4.0 package. As Mark Sapiro rightly points out there are really two types of continued headers defined in this RFC (i.e. "encoded" parameters with the form "name*0*=" and unencoded parameters with the form "name*0="), but we were were handling them both the same way and that isn't correct. This patch should be much more RFC compliant in that only encoded params are %-decoded and the charset/language information is only extract if there are any encoded params in the segments. If there are no encoded params then the RFC says that there will be no charset/language parts. Note however that this will change the return value for Message.get_param() in some cases. For example, whereas before if you had all unencoded param continuations you would have still gotten a 3-tuple back from this method (with charset and language == None), you will now get just a string. I don't believe this is a backward incompatible change though because the documentation for this method already indicates that either return value is possible and that you must do an isinstance(val, tuple) check to discriminate between the two. (Yeah that API kind of sucks but we can't change /that/ without breaking code.) Test cases, some documentation updates, and a NEWS item accompany this patch. ........ r50759 | georg.brandl | 2006-07-21 19:36:31 +0200 (Fri, 21 Jul 2006) | 3 lines Fix check for empty list (vs. None). ........ r50771 | brett.cannon | 2006-07-22 00:44:07 +0200 (Sat, 22 Jul 2006) | 2 lines Remove an XXX marker in a comment. ........ r50773 | neal.norwitz | 2006-07-22 18:20:49 +0200 (Sat, 22 Jul 2006) | 1 line Fix more memory allocation issues found with failmalloc. ........ r50774 | neal.norwitz | 2006-07-22 19:00:57 +0200 (Sat, 22 Jul 2006) | 1 line Don't fail if the directory already exists ........ r50775 | greg.ward | 2006-07-23 04:25:53 +0200 (Sun, 23 Jul 2006) | 6 lines Be a lot smarter about whether this test passes: instead of assuming that a 2.93 sec audio file will always take 3.1 sec (as it did on the hardware I had when I first wrote the test), expect that it will take 2.93 sec +/- 10%, and only fail if it's outside of that range. Compute the expected ........ r50776 | kurt.kaiser | 2006-07-23 06:19:49 +0200 (Sun, 23 Jul 2006) | 2 lines Tooltips failed on new-syle class __init__ args. Bug 1027566 Loren Guthrie ........ r50777 | neal.norwitz | 2006-07-23 09:50:36 +0200 (Sun, 23 Jul 2006) | 1 line Handle more mem alloc issues found with failmalloc ........ r50778 | neal.norwitz | 2006-07-23 09:51:58 +0200 (Sun, 23 Jul 2006) | 5 lines If the for loop isn't entered, entryblock will be NULL. If passed to stackdepth_walk it will be dereffed. Not sure if I found with failmalloc or Klockwork #55. ........ r50779 | neal.norwitz | 2006-07-23 09:53:14 +0200 (Sun, 23 Jul 2006) | 4 lines Move the initialization of size_a down below the check for a being NULL. Reported by Klocwork #106 ........ r50780 | neal.norwitz | 2006-07-23 09:55:55 +0200 (Sun, 23 Jul 2006) | 9 lines Check the allocation of b_objects and return if there was a failure. Also fix a few memory leaks in other failure scenarios. It seems that if b_objects == Py_None, we will have an extra ref to b_objects. Add XXX comment so hopefully someone documents why the else isn't necessary or adds it in. Reported by Klocwork #20 ........ r50781 | neal.norwitz | 2006-07-23 09:57:11 +0200 (Sun, 23 Jul 2006) | 2 lines Fix memory leaks spotted by Klocwork #37. ........ r50782 | neal.norwitz | 2006-07-23 09:59:00 +0200 (Sun, 23 Jul 2006) | 5 lines nextlink can be NULL if teedataobject_new fails, so use XINCREF. Ensure that dataobj is never NULL. Reported by Klocwork #102 ........ r50783 | neal.norwitz | 2006-07-23 10:01:43 +0200 (Sun, 23 Jul 2006) | 8 lines Ensure we don't write beyond errText. I think I got this right, but it definitely could use some review to ensure I'm not off by one and there's no possible overflow/wrap-around of bytes_left. Reported by Klocwork #1. Fix a problem if there is a failure allocating self->db. Found with failmalloc. ........ r50784 | ronald.oussoren | 2006-07-23 11:41:09 +0200 (Sun, 23 Jul 2006) | 3 lines Without this patch CMD-W won't close EditorWindows on MacOS X. This solves part of bug #1517990. ........ r50785 | ronald.oussoren | 2006-07-23 11:46:11 +0200 (Sun, 23 Jul 2006) | 5 lines Fix for bug #1517996: Class and Path browsers show Tk menu This patch replaces the menubar that is used by AquaTk for windows without a menubar of their own by one that is more appropriate for IDLE. ........ r50786 | andrew.macintyre | 2006-07-23 14:57:02 +0200 (Sun, 23 Jul 2006) | 2 lines Build updates for OS/2 EMX port ........ r50787 | andrew.macintyre | 2006-07-23 15:00:04 +0200 (Sun, 23 Jul 2006) | 3 lines bugfix: PyThread_start_new_thread() returns the thread ID, not a flag; will backport. ........ r50789 | andrew.macintyre | 2006-07-23 15:04:00 +0200 (Sun, 23 Jul 2006) | 2 lines Get mailbox module working on OS/2 EMX port. ........ r50791 | greg.ward | 2006-07-23 18:05:51 +0200 (Sun, 23 Jul 2006) | 1 line Resync optparse with Optik 1.5.3: minor tweaks for/to tests. ........ r50794 | martin.v.loewis | 2006-07-24 07:05:22 +0200 (Mon, 24 Jul 2006) | 2 lines Update list of unsupported systems. Fixes #1510853. ........ r50795 | martin.v.loewis | 2006-07-24 12:26:33 +0200 (Mon, 24 Jul 2006) | 1 line Patch #1448199: Release GIL around ConnectRegistry. ........ r50796 | martin.v.loewis | 2006-07-24 13:54:53 +0200 (Mon, 24 Jul 2006) | 3 lines Patch #1232023: Don't include empty path component from registry, so that the current directory does not get added to sys.path. Also fixes #1526785. ........ r50797 | martin.v.loewis | 2006-07-24 14:54:17 +0200 (Mon, 24 Jul 2006) | 3 lines Bug #1524310: Properly report errors from FindNextFile in os.listdir. Will backport to 2.4. ........ r50800 | georg.brandl | 2006-07-24 15:28:57 +0200 (Mon, 24 Jul 2006) | 7 lines Patch #1523356: fix determining include dirs in python-config. Also don't install "python-config" when doing altinstall, but always install "python-config2.x" and make a link to it like with the main executable. ........ r50802 | georg.brandl | 2006-07-24 15:46:47 +0200 (Mon, 24 Jul 2006) | 3 lines Patch #1527744: right order of includes in order to have HAVE_CONIO_H defined properly. ........ r50803 | georg.brandl | 2006-07-24 16:09:56 +0200 (Mon, 24 Jul 2006) | 3 lines Patch #1515343: Fix printing of deprecated string exceptions with a value in the traceback module. ........ r50804 | kurt.kaiser | 2006-07-24 19:13:23 +0200 (Mon, 24 Jul 2006) | 7 lines EditorWindow failed when used stand-alone if sys.ps1 not set. Bug 1010370 Dave Florek M EditorWindow.py M PyShell.py M NEWS.txt ........ r50805 | kurt.kaiser | 2006-07-24 20:05:51 +0200 (Mon, 24 Jul 2006) | 6 lines - EditorWindow.test() was failing. Bug 1417598 M EditorWindow.py M ScriptBinding.py M NEWS.txt ........ r50808 | georg.brandl | 2006-07-24 22:11:35 +0200 (Mon, 24 Jul 2006) | 3 lines Repair accidental NameError. ........ r50809 | tim.peters | 2006-07-24 23:02:15 +0200 (Mon, 24 Jul 2006) | 2 lines Whitespace normalization. ........ r50810 | greg.ward | 2006-07-25 04:11:12 +0200 (Tue, 25 Jul 2006) | 3 lines Don't use standard assert: want tests to fail even when run with -O. Delete cruft. ........ r50811 | tim.peters | 2006-07-25 06:07:22 +0200 (Tue, 25 Jul 2006) | 10 lines current_frames_with_threads(): There's actually no way to guess /which/ line the spawned thread is in at the time sys._current_frames() is called: we know it finished enter_g.set(), but can't know whether the instruction counter has advanced to the following leave_g.wait(). The latter is overwhelming most likely, but not guaranteed, and I see that the "x86 Ubuntu dapper (icc) trunk" buildbot found it on the other line once. Changed the test so it passes in either case. ........ r50815 | martin.v.loewis | 2006-07-25 11:53:12 +0200 (Tue, 25 Jul 2006) | 2 lines Bug #1525817: Don't truncate short lines in IDLE's tool tips. ........ r50816 | martin.v.loewis | 2006-07-25 12:05:47 +0200 (Tue, 25 Jul 2006) | 3 lines Bug #978833: Really close underlying socket in _socketobject.close. Will backport to 2.4. ........ r50817 | martin.v.loewis | 2006-07-25 12:11:14 +0200 (Tue, 25 Jul 2006) | 1 line Revert incomplete checkin. ........ r50819 | georg.brandl | 2006-07-25 12:22:34 +0200 (Tue, 25 Jul 2006) | 4 lines Patch #1525766: correctly pass onerror arg to recursive calls of pkg.walk_packages. Also improve the docstrings. ........ r50825 | brett.cannon | 2006-07-25 19:32:20 +0200 (Tue, 25 Jul 2006) | 2 lines Add comment for changes to test_ossaudiodev. ........ r50826 | brett.cannon | 2006-07-25 19:34:36 +0200 (Tue, 25 Jul 2006) | 3 lines Fix a bug in the messages for an assert failure where not enough arguments to a string were being converted in the format. ........ r50828 | armin.rigo | 2006-07-25 20:09:57 +0200 (Tue, 25 Jul 2006) | 2 lines Document why is and is not a good way to fix the gc_inspection crasher. ........ r50829 | armin.rigo | 2006-07-25 20:11:07 +0200 (Tue, 25 Jul 2006) | 5 lines Added another crasher, which hit me today (I was not intentionally writing such code, of course, but it took some gdb time to figure out what my bug was). ........ r50830 | armin.rigo | 2006-07-25 20:38:39 +0200 (Tue, 25 Jul 2006) | 3 lines Document the crashers that will not go away soon as "won't fix", and explain why. ........ r50831 | ronald.oussoren | 2006-07-25 21:13:35 +0200 (Tue, 25 Jul 2006) | 3 lines Install the compatibility symlink to libpython.a on OSX using 'ln -sf' instead of 'ln -s', this avoid problems when reinstalling python. ........ r50832 | ronald.oussoren | 2006-07-25 21:20:54 +0200 (Tue, 25 Jul 2006) | 7 lines Fix for bug #1525447 (renaming to MacOSmodule.c would also work, but not without causing problems for anyone that is on a case-insensitive filesystem). Setup.py tries to compile the MacOS extension from MacOSmodule.c, while the actual file is named macosmodule.c. This is no problem on the (default) case-insensitive filesystem, but doesn't work on case-sensitive filesystems. ........ r50833 | ronald.oussoren | 2006-07-25 22:28:55 +0200 (Tue, 25 Jul 2006) | 7 lines Fix bug #1517990: IDLE keybindings on OSX This adds a new key definition for OSX, which is slightly different from the classic mac definition. Also add NEWS item for a couple of bugfixes I added recently. ........ r50834 | tim.peters | 2006-07-26 00:30:24 +0200 (Wed, 26 Jul 2006) | 2 lines Whitespace normalization. ........ r50839 | neal.norwitz | 2006-07-26 06:00:18 +0200 (Wed, 26 Jul 2006) | 1 line Hmm, only python2.x is installed, not plain python. Did that change recently? ........ r50840 | barry.warsaw | 2006-07-26 07:54:46 +0200 (Wed, 26 Jul 2006) | 6 lines Forward port some fixes that were in email 2.5 but for some reason didn't make it into email 4.0. Specifically, in Message.get_content_charset(), handle RFC 2231 headers that contain an encoding not known to Python, or a character in the data that isn't in the charset encoding. Also forward port the appropriate unit tests. ........ r50841 | georg.brandl | 2006-07-26 09:23:32 +0200 (Wed, 26 Jul 2006) | 3 lines NEWS entry for #1525766. ........ r50842 | georg.brandl | 2006-07-26 09:40:17 +0200 (Wed, 26 Jul 2006) | 3 lines Bug #1459963: properly capitalize HTTP header names. ........ r50843 | georg.brandl | 2006-07-26 10:03:10 +0200 (Wed, 26 Jul 2006) | 6 lines Part of bug #1523610: fix miscalculation of buffer length. Also add a guard against NULL in converttuple and add a test case (that previously would have crashed). ........ r50844 | martin.v.loewis | 2006-07-26 14:12:56 +0200 (Wed, 26 Jul 2006) | 3 lines Bug #978833: Really close underlying socket in _socketobject.close. Fix httplib.HTTPConnection.getresponse to not close the socket if it is still needed for the response. ........ r50845 | andrew.kuchling | 2006-07-26 19:16:52 +0200 (Wed, 26 Jul 2006) | 1 line [Bug #1471938] Fix build problem on Solaris 8 by conditionalizing the use of mvwgetnstr(); it was conditionalized a few lines below. Fix from Paul Eggert. I also tried out the STRICT_SYSV_CURSES case and am therefore removing the 'untested' comment. ........ r50846 | andrew.kuchling | 2006-07-26 19:18:01 +0200 (Wed, 26 Jul 2006) | 1 line Correct error message ........ r50847 | andrew.kuchling | 2006-07-26 19:19:39 +0200 (Wed, 26 Jul 2006) | 1 line Minor grammar fix ........ r50848 | andrew.kuchling | 2006-07-26 19:22:21 +0200 (Wed, 26 Jul 2006) | 1 line Put news item in right section ........ r50850 | andrew.kuchling | 2006-07-26 20:03:12 +0200 (Wed, 26 Jul 2006) | 1 line Use sys.exc_info() ........ r50851 | andrew.kuchling | 2006-07-26 20:15:45 +0200 (Wed, 26 Jul 2006) | 1 line Use sys.exc_info() ........ r50852 | phillip.eby | 2006-07-26 21:48:27 +0200 (Wed, 26 Jul 2006) | 4 lines Allow the 'onerror' argument to walk_packages() to catch any Exception, not just ImportError. This allows documentation tools to better skip unimportable packages. ........ r50854 | tim.peters | 2006-07-27 01:23:15 +0200 (Thu, 27 Jul 2006) | 2 lines Whitespace normalization. ........ r50855 | tim.peters | 2006-07-27 03:14:53 +0200 (Thu, 27 Jul 2006) | 21 lines Bug #1521947: possible bug in mystrtol.c with recent gcc. In general, C doesn't define anything about what happens when an operation on a signed integral type overflows, and PyOS_strtol() did several formally undefined things of that nature on signed longs. Some version of gcc apparently tries to exploit that now, and PyOS_strtol() could fail to detect overflow then. Tried to repair all that, although it seems at least as likely to me that we'll get screwed by bad platform definitions for LONG_MIN and/or LONG_MAX now. For that reason, I don't recommend backporting this. Note that I have no box on which this makes a lick of difference -- can't really test it, except to note that it didn't break anything on my boxes. Silent change: PyOS_strtol() used to return the hard-coded 0x7fffffff in case of overflow. Now it returns LONG_MAX. They're the same only on 32-bit boxes (although C doesn't guarantee that either ...). ........ r50856 | neal.norwitz | 2006-07-27 05:51:58 +0200 (Thu, 27 Jul 2006) | 6 lines Don't kill a normal instance of python running on windows when checking to kill a cygwin instance. build\\python.exe was matching a normal windows instance. Prefix that with a \\ to ensure build is a directory and not PCbuild. As discussed on python-dev. ........ r50857 | neal.norwitz | 2006-07-27 05:55:39 +0200 (Thu, 27 Jul 2006) | 5 lines Closure can't be NULL at this point since we know it's a tuple. Reported by Klocwork # 74. ........ r50858 | neal.norwitz | 2006-07-27 06:04:50 +0200 (Thu, 27 Jul 2006) | 1 line No functional change. Add comment and assert to describe why there cannot be overflow which was reported by Klocwork. Discussed on python-dev ........ r50859 | martin.v.loewis | 2006-07-27 08:38:16 +0200 (Thu, 27 Jul 2006) | 3 lines Bump distutils version to 2.5, as several new features have been introduced since 2.4. ........ r50860 | andrew.kuchling | 2006-07-27 14:18:20 +0200 (Thu, 27 Jul 2006) | 1 line Reformat docstring; fix typo ........ r50861 | georg.brandl | 2006-07-27 17:05:36 +0200 (Thu, 27 Jul 2006) | 6 lines Add test_main() methods. These three tests were never run by regrtest.py. We really need a simpler testing framework. ........ r50862 | tim.peters | 2006-07-27 17:09:20 +0200 (Thu, 27 Jul 2006) | 2 lines News for patch #1529686. ........ r50863 | tim.peters | 2006-07-27 17:11:00 +0200 (Thu, 27 Jul 2006) | 2 lines Whitespace normalization. ........ r50864 | georg.brandl | 2006-07-27 17:38:33 +0200 (Thu, 27 Jul 2006) | 3 lines Amend news entry. ........ r50865 | georg.brandl | 2006-07-27 18:08:15 +0200 (Thu, 27 Jul 2006) | 3 lines Make uuid test suite pass on this box by requesting output with LC_ALL=C. ........ r50866 | andrew.kuchling | 2006-07-27 20:37:33 +0200 (Thu, 27 Jul 2006) | 1 line Add example ........ r50867 | thomas.heller | 2006-07-27 20:39:55 +0200 (Thu, 27 Jul 2006) | 9 lines Remove code that is no longer used (ctypes.com). Fix the DllGetClassObject and DllCanUnloadNow so that they forward the call to the comtypes.server.inprocserver module. The latter was never documented, never used by published code, and didn't work anyway, so I think it does not deserve a NEWS entry (but I might be wrong). ........ r50868 | andrew.kuchling | 2006-07-27 20:41:21 +0200 (Thu, 27 Jul 2006) | 1 line Typo fix ('publically' is rare, poss. non-standard) ........ r50869 | andrew.kuchling | 2006-07-27 20:42:41 +0200 (Thu, 27 Jul 2006) | 1 line Add missing word ........ r50870 | andrew.kuchling | 2006-07-27 20:44:10 +0200 (Thu, 27 Jul 2006) | 1 line Repair typos ........ r50872 | andrew.kuchling | 2006-07-27 20:53:33 +0200 (Thu, 27 Jul 2006) | 1 line Update URL; add example ........ r50873 | andrew.kuchling | 2006-07-27 21:07:29 +0200 (Thu, 27 Jul 2006) | 1 line Add punctuation mark; add some examples ........ r50874 | andrew.kuchling | 2006-07-27 21:11:07 +0200 (Thu, 27 Jul 2006) | 1 line Mention base64 module; rewrite last sentence to be more positive ........ r50875 | andrew.kuchling | 2006-07-27 21:12:49 +0200 (Thu, 27 Jul 2006) | 1 line If binhex is higher-level than binascii, it should come first in the chapter ........ r50876 | tim.peters | 2006-07-27 22:47:24 +0200 (Thu, 27 Jul 2006) | 28 lines check_node(): stop spraying mystery output to stderr. When a node number disagrees, keep track of all sources & the node numbers they reported, and stick all that in the error message. Changed all callers to supply a non-empty "source" argument; made the "source" argument non-optional. On my box, test_uuid still fails, but with the less confusing output: AssertionError: different sources disagree on node: from source 'getnode1', node was 00038a000015 from source 'getnode2', node was 00038a000015 from source 'ipconfig', node was 001111b2b7bf Only the last one appears to be correct; e.g., C:\Code\python\PCbuild>getmac Physical Address Transport Name =================== ========================================================== 00-11-11-B2-B7-BF \Device\Tcpip_{190FB163-5AFD-4483-86A1-2FE16AC61FF1} 62-A1-AC-6C-FD-BE \Device\Tcpip_{8F77DF5A-EA3D-4F1D-975E-D472CEE6438A} E2-1F-01-C6-5D-88 \Device\Tcpip_{CD18F76B-2EF3-409F-9B8A-6481EE70A1E4} I can't find anything on my box with MAC 00-03-8a-00-00-15, and am not clear on where that comes from. ........ r50878 | andrew.kuchling | 2006-07-28 00:40:05 +0200 (Fri, 28 Jul 2006) | 1 line Reword paragraph ........ r50879 | andrew.kuchling | 2006-07-28 00:49:38 +0200 (Fri, 28 Jul 2006) | 1 line Add example ........ r50880 | andrew.kuchling | 2006-07-28 00:49:54 +0200 (Fri, 28 Jul 2006) | 1 line Add example ........ r50881 | barry.warsaw | 2006-07-28 01:43:15 +0200 (Fri, 28 Jul 2006) | 27 lines Patch #1520294: Support for getset and member descriptors in types.py, inspect.py, and pydoc.py. Specifically, this allows for querying the type of an object against these built-in C types and more importantly, for getting their docstrings printed in the interactive interpreter's help() function. This patch includes a new built-in module called _types which provides definitions of getset and member descriptors for use by the types.py module. These types are exposed as types.GetSetDescriptorType and types.MemberDescriptorType. Query functions are provided as inspect.isgetsetdescriptor() and inspect.ismemberdescriptor(). The implementations of these are robust enough to work with Python implementations other than CPython, which may not have these fundamental types. The patch also includes documentation and test suite updates. I commit these changes now under these guiding principles: 1. Silence is assent. The release manager has not said "no", and of the few people that cared enough to respond to the thread, the worst vote was "0". 2. It's easier to ask for forgiveness than permission. 3. It's so dang easy to revert stuff in svn, that you could view this as a forcing function. :) Windows build patches will follow. ........ r50882 | tim.peters | 2006-07-28 01:44:37 +0200 (Fri, 28 Jul 2006) | 4 lines Bug #1529297: The rewrite of doctest for Python 2.4 unintentionally lost that tests are sorted by name before being run. ``DocTestFinder`` has been changed to sort the list of tests it returns. ........ r50883 | tim.peters | 2006-07-28 01:45:48 +0200 (Fri, 28 Jul 2006) | 2 lines Whitespace normalization. ........ r50884 | tim.peters | 2006-07-28 01:46:36 +0200 (Fri, 28 Jul 2006) | 2 lines Add missing svn:eol-style property to text files. ........ r50885 | barry.warsaw | 2006-07-28 01:50:40 +0200 (Fri, 28 Jul 2006) | 4 lines Enable the building of the _types module on Windows. Note that this has only been tested for VS 2003 since that's all I have. ........ r50887 | tim.peters | 2006-07-28 02:23:15 +0200 (Fri, 28 Jul 2006) | 7 lines defdict_reduce(): Plug leaks. We didn't notice these before because test_defaultdict didn't actually do anything before Georg fixed that earlier today. Neal's next refleak run then showed test_defaultdict leaking 9 references on each run. That's repaired by this checkin. ........ r50888 | tim.peters | 2006-07-28 02:30:00 +0200 (Fri, 28 Jul 2006) | 2 lines News about the repaired memory leak in defaultdict. ........ r50889 | gregory.p.smith | 2006-07-28 03:35:25 +0200 (Fri, 28 Jul 2006) | 7 lines - pybsddb Bug #1527939: bsddb module DBEnv dbremove and dbrename methods now allow their database parameter to be None as the sleepycat API allows. Also adds an appropriate test case for DBEnv.dbrename and dbremove. ........ r50895 | neal.norwitz | 2006-07-28 06:22:34 +0200 (Fri, 28 Jul 2006) | 1 line Ensure the actual number matches the expected count ........ r50896 | tim.peters | 2006-07-28 06:51:59 +0200 (Fri, 28 Jul 2006) | 6 lines Live with that "the hardware address" is an ill-defined concept, and that different ways of trying to find "the hardware address" may return different results. Certainly true on both of my Windows boxes, and in different ways (see whining on python-dev). ........ r50897 | neal.norwitz | 2006-07-28 09:21:27 +0200 (Fri, 28 Jul 2006) | 3 lines Try to find the MAC addr on various flavours of Unix. This seems hopeless. The reduces the test_uuid failures, but there's still another method failing. ........ r50898 | martin.v.loewis | 2006-07-28 09:45:49 +0200 (Fri, 28 Jul 2006) | 2 lines Add UUID for upcoming 2.5b3. ........ r50899 | matt.fleming | 2006-07-28 13:27:27 +0200 (Fri, 28 Jul 2006) | 3 lines Allow socketmodule to compile on NetBSD -current, whose bluetooth API differs from both Linux and FreeBSD. Accepted by Neal Norwitz. ........ r50900 | andrew.kuchling | 2006-07-28 14:07:12 +0200 (Fri, 28 Jul 2006) | 1 line [Patch #1529811] Correction to description of r|* mode ........ r50901 | andrew.kuchling | 2006-07-28 14:18:22 +0200 (Fri, 28 Jul 2006) | 1 line Typo fix ........ r50902 | andrew.kuchling | 2006-07-28 14:32:43 +0200 (Fri, 28 Jul 2006) | 1 line Add example ........ r50903 | andrew.kuchling | 2006-07-28 14:33:19 +0200 (Fri, 28 Jul 2006) | 1 line Add example ........ r50904 | andrew.kuchling | 2006-07-28 14:45:55 +0200 (Fri, 28 Jul 2006) | 1 line Don't overwrite built-in name; add some blank lines for readability ........ r50905 | andrew.kuchling | 2006-07-28 14:48:07 +0200 (Fri, 28 Jul 2006) | 1 line Add example. Should I propagate this example to all the other DBM-ish modules, too? ........ r50912 | georg.brandl | 2006-07-28 20:31:39 +0200 (Fri, 28 Jul 2006) | 3 lines Patch #1529686: also run test_email_codecs with regrtest.py. ........ r50913 | georg.brandl | 2006-07-28 20:36:01 +0200 (Fri, 28 Jul 2006) | 3 lines Fix spelling. ........ r50915 | thomas.heller | 2006-07-28 21:42:40 +0200 (Fri, 28 Jul 2006) | 3 lines Remove a useless XXX comment. Cosmetic changes to the code so that the #ifdef _UNICODE block doesn't mess emacs code formatting. ........ r50916 | phillip.eby | 2006-07-28 23:12:07 +0200 (Fri, 28 Jul 2006) | 5 lines Bug #1529871: The speed enhancement patch #921466 broke Python's compliance with PEP 302. This was fixed by adding an ``imp.NullImporter`` type that is used in ``sys.path_importer_cache`` to cache non-directory paths and avoid excessive filesystem operations during imports. ........ r50917 | phillip.eby | 2006-07-28 23:31:54 +0200 (Fri, 28 Jul 2006) | 2 lines Fix svn merge spew. ........ r50918 | thomas.heller | 2006-07-28 23:43:20 +0200 (Fri, 28 Jul 2006) | 4 lines Patch #1529514: More openbsd platforms for ctypes. Regenerated Modules/_ctypes/libffi/configure with autoconf 2.59. Approved by Neal. ........ r50922 | georg.brandl | 2006-07-29 10:51:21 +0200 (Sat, 29 Jul 2006) | 2 lines Bug #835255: The "closure" argument to new.function() is now documented. ........ r50924 | georg.brandl | 2006-07-29 11:33:26 +0200 (Sat, 29 Jul 2006) | 3 lines Bug #1441397: The compiler module now recognizes module and function docstrings correctly as it did in Python 2.4. ........ r50925 | georg.brandl | 2006-07-29 12:25:46 +0200 (Sat, 29 Jul 2006) | 4 lines Revert rev 42617, it was introduced to work around bug #1441397. test_compiler now passes again. ........ r50926 | fred.drake | 2006-07-29 15:22:49 +0200 (Sat, 29 Jul 2006) | 1 line update target version number ........ r50927 | andrew.kuchling | 2006-07-29 15:56:48 +0200 (Sat, 29 Jul 2006) | 1 line Add example ........ r50928 | andrew.kuchling | 2006-07-29 16:04:47 +0200 (Sat, 29 Jul 2006) | 1 line Update URL ........ r50930 | andrew.kuchling | 2006-07-29 16:08:15 +0200 (Sat, 29 Jul 2006) | 1 line Reword paragraph to match the order of the subsequent sections ........ r50931 | andrew.kuchling | 2006-07-29 16:21:15 +0200 (Sat, 29 Jul 2006) | 1 line [Bug #1529157] Mention raw_input() and input(); while I'm at it, reword the description a bit ........ r50932 | andrew.kuchling | 2006-07-29 16:42:48 +0200 (Sat, 29 Jul 2006) | 1 line [Bug #1519571] Document some missing functions: setup(), title(), done() ........ r50933 | andrew.kuchling | 2006-07-29 16:43:55 +0200 (Sat, 29 Jul 2006) | 1 line Fix docstring punctuation ........ r50934 | andrew.kuchling | 2006-07-29 17:10:32 +0200 (Sat, 29 Jul 2006) | 1 line [Bug #1414697] Change docstring of set/frozenset types to specify that the contents are unique. Raymond, please feel free to edit or revert. ........ r50935 | andrew.kuchling | 2006-07-29 17:35:21 +0200 (Sat, 29 Jul 2006) | 1 line [Bug #1530382] Document SSL.server(), .issuer() methods ........ r50936 | andrew.kuchling | 2006-07-29 17:42:46 +0200 (Sat, 29 Jul 2006) | 1 line Typo fix ........ r50937 | andrew.kuchling | 2006-07-29 17:43:13 +0200 (Sat, 29 Jul 2006) | 1 line Tweak wording ........ r50938 | matt.fleming | 2006-07-29 17:55:30 +0200 (Sat, 29 Jul 2006) | 2 lines Fix typo ........ r50939 | andrew.kuchling | 2006-07-29 17:57:08 +0200 (Sat, 29 Jul 2006) | 6 lines [Bug #1528258] Mention that the 'data' argument can be None. The constructor docs referred the reader to the add_data() method's docs, but they weren't very helpful. I've simply copied an earlier explanation of 'data' that's more useful. ........ r50940 | andrew.kuchling | 2006-07-29 18:08:40 +0200 (Sat, 29 Jul 2006) | 1 line Set bug/patch count. Take a bow, everyone! ........ r50941 | fred.drake | 2006-07-29 18:56:15 +0200 (Sat, 29 Jul 2006) | 18 lines expunge the xmlcore changes: 41667, 41668 - initial switch to xmlcore 47044 - mention of xmlcore in What's New 50687 - mention of xmlcore in the library reference re-apply xmlcore changes to xml: 41674 - line ending changes (re-applied manually), directory props 41677 - add cElementTree wrapper 41678 - PSF licensing for etree 41812 - whitespace normalization 42724 - fix svn:eol-style settings 43681, 43682 - remove Python version-compatibility cruft from minidom 46773 - fix encoding of \r\n\t in attr values in saxutils 47269 - added XMLParser alias for cElementTree compatibility additional tests were added in Lib/test/test_sax.py that failed with the xmlcore changes; these relate to SF bugs #1511497, #1513611 ........ r50942 | andrew.kuchling | 2006-07-29 20:14:07 +0200 (Sat, 29 Jul 2006) | 17 lines Reorganize the docs for 'file' and 'open()' after some discussion with Fred. We want to encourage users to write open() when opening a file, but open() was described with a single paragraph and 'file' had lots of explanation of the mode and bufsize arguments. I've shrunk the description of 'file' to cross-reference to the 'File objects' section, and to open() for an explanation of the arguments. open() now has all the paragraphs about the mode string. The bufsize argument was moved up so that it isn't buried at the end; now there's 1 paragraph on mode, 1 on bufsize, and then 3 more on mode. Various other edits and rearrangements were made in the process. It's probably best to read the final text and not to try to make sense of the diffs. ........ r50943 | fred.drake | 2006-07-29 20:19:19 +0200 (Sat, 29 Jul 2006) | 1 line restore test un-intentionally removed in the xmlcore purge (revision 50941) ........ r50944 | fred.drake | 2006-07-29 20:33:29 +0200 (Sat, 29 Jul 2006) | 3 lines make the reference to older versions of the documentation a link to the right page on python.org ........ r50945 | fred.drake | 2006-07-29 21:09:01 +0200 (Sat, 29 Jul 2006) | 1 line document the footnote usage pattern ........ r50947 | fred.drake | 2006-07-29 21:14:10 +0200 (Sat, 29 Jul 2006) | 1 line emphasize and oddball nuance of LaTeX comment syntax ........ r50948 | andrew.kuchling | 2006-07-29 21:24:04 +0200 (Sat, 29 Jul 2006) | 1 line [Patch #1490989 from Skip Montanaro] Mention debugging builds in the API documentation. I've changed Skip's patch to point to Misc/SpecialBuilds and fiddled with the markup a bit. ........ r50949 | neal.norwitz | 2006-07-29 21:29:35 +0200 (Sat, 29 Jul 2006) | 6 lines Disable these tests until they are reliable across platforms. These problems may mask more important, real problems. One or both methods are known to fail on: Solaris, OpenBSD, Debian, Ubuntu. They pass on Windows and some Linux boxes. ........ r50950 | andrew.kuchling | 2006-07-29 21:50:37 +0200 (Sat, 29 Jul 2006) | 1 line [Patch #1068277] Clarify that os.path.exists() can return False depending on permissions. Fred approved committing this patch in December 2004! ........ r50952 | fred.drake | 2006-07-29 22:04:42 +0200 (Sat, 29 Jul 2006) | 6 lines SF bug #1193966: Weakref types documentation misplaced The information about supporting weakrefs with types defined in C extensions is moved to the Extending & Embedding manual. Py_TPFLAGS_HAVE_WEAKREFS is no longer mentioned since it is part of Py_TPFLAGS_DEFAULT. ........ r50953 | skip.montanaro | 2006-07-29 22:06:05 +0200 (Sat, 29 Jul 2006) | 4 lines Add a comment to the csv reader documentation that explains why the treatment of newlines changed in 2.5. Pulled almost verbatim from a comment by Andrew McNamara in <http://python.org/sf/1465014>. ........ r50954 | neal.norwitz | 2006-07-29 22:20:52 +0200 (Sat, 29 Jul 2006) | 3 lines If the executable doesn't exist, there's no reason to try to start it. This prevents garbage about command not found being printed on Solaris. ........ r50955 | fred.drake | 2006-07-29 22:21:25 +0200 (Sat, 29 Jul 2006) | 1 line fix minor markup error that introduced extra punctuation ........ r50957 | neal.norwitz | 2006-07-29 22:37:08 +0200 (Sat, 29 Jul 2006) | 3 lines Disable test_getnode too, since this is also unreliable. ........ r50958 | andrew.kuchling | 2006-07-29 23:27:12 +0200 (Sat, 29 Jul 2006) | 1 line Follow TeX's conventions for hyphens ........ r50959 | andrew.kuchling | 2006-07-29 23:30:21 +0200 (Sat, 29 Jul 2006) | 1 line Fix case for 'Unix' ........ r50960 | fred.drake | 2006-07-30 01:34:57 +0200 (Sun, 30 Jul 2006) | 1 line markup cleanups ........ r50961 | andrew.kuchling | 2006-07-30 02:27:34 +0200 (Sun, 30 Jul 2006) | 1 line Minor typo fixes ........ r50962 | andrew.kuchling | 2006-07-30 02:37:56 +0200 (Sun, 30 Jul 2006) | 1 line [Bug #793553] Correct description of keyword arguments for SSL authentication ........ r50963 | tim.peters | 2006-07-30 02:58:15 +0200 (Sun, 30 Jul 2006) | 2 lines Whitespace normalization. ........ r50964 | fred.drake | 2006-07-30 05:03:43 +0200 (Sun, 30 Jul 2006) | 1 line lots of markup nits, most commonly Unix/unix --> \UNIX ........ r50965 | fred.drake | 2006-07-30 07:41:28 +0200 (Sun, 30 Jul 2006) | 1 line update information on wxPython, from Robin Dunn ........ r50966 | fred.drake | 2006-07-30 07:49:49 +0200 (Sun, 30 Jul 2006) | 4 lines remove possibly-outdated comment on what GUI toolkit is most commonly used; it is hard to know whether this is right, and it does not add valuable reference information at any rate ........ r50967 | fred.drake | 2006-07-30 07:55:39 +0200 (Sun, 30 Jul 2006) | 3 lines - remove yet another reference to how commonly Tkinter is (thought to be) used - fix an internal section reference ........ r50968 | neal.norwitz | 2006-07-30 08:53:31 +0200 (Sun, 30 Jul 2006) | 4 lines Patch #1531113: Fix augmented assignment with yield expressions. Also fix a SystemError when trying to assign to yield expressions. ........ r50969 | neal.norwitz | 2006-07-30 08:55:48 +0200 (Sun, 30 Jul 2006) | 5 lines Add PyErr_WarnEx() so C code can pass the stacklevel to warnings.warn(). This provides the proper warning for struct.pack(). PyErr_Warn() is now deprecated in favor of PyErr_WarnEx(). As mentioned by Tim Peters on python-dev. ........ r50970 | neal.norwitz | 2006-07-30 08:57:04 +0200 (Sun, 30 Jul 2006) | 3 lines Bug #1515471: string.replace() accepts character buffers again. Pass the char* and size around rather than PyObject's. ........ r50971 | neal.norwitz | 2006-07-30 08:59:13 +0200 (Sun, 30 Jul 2006) | 1 line Whitespace normalization ........ r50973 | georg.brandl | 2006-07-30 12:53:32 +0200 (Sun, 30 Jul 2006) | 3 lines Clarify that __op__ methods must return NotImplemented if they don't support the operation. ........ r50974 | georg.brandl | 2006-07-30 13:07:23 +0200 (Sun, 30 Jul 2006) | 3 lines Bug #1002398: The documentation for os.path.sameopenfile now correctly refers to file descriptors, not file objects. ........ r50977 | martin.v.loewis | 2006-07-30 15:00:31 +0200 (Sun, 30 Jul 2006) | 3 lines Don't copy directory stat times in shutil.copytree on Windows Fixes #1525866. ........ r50978 | martin.v.loewis | 2006-07-30 15:14:05 +0200 (Sun, 30 Jul 2006) | 3 lines Base __version__ on sys.version_info, as distutils is no longer maintained separatedly. ........ r50979 | martin.v.loewis | 2006-07-30 15:27:31 +0200 (Sun, 30 Jul 2006) | 3 lines Mention Cygwin in distutils error message about a missing VS 2003. Fixes #1257728. ........ r50982 | martin.v.loewis | 2006-07-30 16:09:47 +0200 (Sun, 30 Jul 2006) | 5 lines Drop usage of test -e in configure as it is not portable. Fixes #1439538 Will backport to 2.4 Also regenerate pyconfig.h.in. ........ r50984 | georg.brandl | 2006-07-30 18:20:10 +0200 (Sun, 30 Jul 2006) | 3 lines Fix makefile changes for python-config. ........ r50985 | george.yoshida | 2006-07-30 18:37:37 +0200 (Sun, 30 Jul 2006) | 2 lines Rename struct.pack_to to struct.pack_into as changed in revision 46642. ........ r50986 | george.yoshida | 2006-07-30 18:41:30 +0200 (Sun, 30 Jul 2006) | 2 lines Typo fix ........ r50987 | neal.norwitz | 2006-07-30 21:18:13 +0200 (Sun, 30 Jul 2006) | 1 line Add some asserts and update comments ........ r50988 | neal.norwitz | 2006-07-30 21:18:38 +0200 (Sun, 30 Jul 2006) | 1 line Verify that the signal handlers were really called ........ r50989 | neal.norwitz | 2006-07-30 21:20:42 +0200 (Sun, 30 Jul 2006) | 3 lines Try to prevent hangs on Tru64/Alpha buildbot. I'm not certain this will help and may need to be reverted if it causes problems. ........ r50990 | georg.brandl | 2006-07-30 22:18:51 +0200 (Sun, 30 Jul 2006) | 2 lines Bug #1531349: right <-> left glitch in __rop__ description. ........ r50992 | tim.peters | 2006-07-31 03:46:03 +0200 (Mon, 31 Jul 2006) | 2 lines Whitespace normalization. ........ r50993 | andrew.mcnamara | 2006-07-31 04:27:48 +0200 (Mon, 31 Jul 2006) | 2 lines Redo the comment about the 2.5 change in quoted-newline handling. ........ r50994 | tim.peters | 2006-07-31 04:40:23 +0200 (Mon, 31 Jul 2006) | 10 lines ZipFile.close(): Killed one of the struct.pack deprecation warnings on Win32. Also added an XXX about the line: pos3 = self.fp.tell() `pos3` is never referenced, and I have no idea what the code intended to do instead. ........ r50996 | tim.peters | 2006-07-31 04:53:03 +0200 (Mon, 31 Jul 2006) | 8 lines ZipFile.close(): Kill the other struct.pack deprecation warning on Windows. Afraid I can't detect a pattern to when the pack formats decide to use a signed or unsigned format code -- appears nearly arbitrary to my eyes. So I left all the pack formats alone and changed the special-case data values instead. ........ r50997 | skip.montanaro | 2006-07-31 05:09:45 +0200 (Mon, 31 Jul 2006) | 1 line minor tweaks ........ r50998 | skip.montanaro | 2006-07-31 05:11:11 +0200 (Mon, 31 Jul 2006) | 1 line minor tweaks ........ r50999 | andrew.kuchling | 2006-07-31 14:20:24 +0200 (Mon, 31 Jul 2006) | 1 line Add refcounts for PyErr_WarnEx ........ r51000 | andrew.kuchling | 2006-07-31 14:39:05 +0200 (Mon, 31 Jul 2006) | 9 lines Document PyErr_WarnEx. (Bad Neal! No biscuit!) Is the explanation of the 'stacklevel' parameter clear? Please feel free to edit it. I don't have LaTeX installed on this machine, so haven't verified that the markup is correct. Will check tonight, or maybe the automatic doc build will tell me. ........ r51001 | andrew.kuchling | 2006-07-31 14:52:26 +0200 (Mon, 31 Jul 2006) | 1 line Add PyErr_WarnEx() ........ r51002 | andrew.kuchling | 2006-07-31 15:18:27 +0200 (Mon, 31 Jul 2006) | 1 line Mention csv newline changes ........ r51003 | andrew.kuchling | 2006-07-31 17:22:58 +0200 (Mon, 31 Jul 2006) | 1 line Typo fix ........ r51004 | andrew.kuchling | 2006-07-31 17:23:43 +0200 (Mon, 31 Jul 2006) | 1 line Remove reference to notation ........ r51005 | georg.brandl | 2006-07-31 18:00:34 +0200 (Mon, 31 Jul 2006) | 3 lines Fix function name. ........ r51006 | andrew.kuchling | 2006-07-31 18:10:24 +0200 (Mon, 31 Jul 2006) | 1 line [Bug #1514540] Instead of putting the standard types in a section, put them in a chapter of their own. This means string methods will now show up in the ToC. (Should the types come before or after the functions+exceptions+constants chapter? I've put them after, for now.) ........ r51007 | andrew.kuchling | 2006-07-31 18:22:05 +0200 (Mon, 31 Jul 2006) | 1 line [Bug #848556] Remove \d* from second alternative to avoid exponential case when repeating match ........ r51008 | andrew.kuchling | 2006-07-31 18:27:57 +0200 (Mon, 31 Jul 2006) | 1 line Update list of files; fix a typo ........ r51013 | andrew.kuchling | 2006-08-01 18:24:30 +0200 (Tue, 01 Aug 2006) | 1 line typo fix ........ r51018 | thomas.heller | 2006-08-01 18:54:43 +0200 (Tue, 01 Aug 2006) | 2 lines Fix a potential segfault and various potentail refcount leaks in the cast() function. ........ r51020 | thomas.heller | 2006-08-01 19:46:10 +0200 (Tue, 01 Aug 2006) | 1 line Minimal useful docstring for CopyComPointer. ........ r51021 | andrew.kuchling | 2006-08-01 20:16:15 +0200 (Tue, 01 Aug 2006) | 8 lines [Patch #1520905] Attempt to suppress core file created by test_subprocess.py. Patch by Douglas Greiman. The test_run_abort() testcase produces a core file on Unix systems, even though the test is successful. This can be confusing or alarming to someone who runs 'make test' and then finds that the Python interpreter apparently crashed. ........ r51023 | georg.brandl | 2006-08-01 20:49:24 +0200 (Tue, 01 Aug 2006) | 3 lines os.urandom no longer masks unrelated exceptions like SystemExit or KeyboardInterrupt. ........ r51025 | thomas.heller | 2006-08-01 21:14:15 +0200 (Tue, 01 Aug 2006) | 2 lines Speed up PyType_stgdict and PyObject_stgdict. ........ r51027 | ronald.oussoren | 2006-08-01 22:30:31 +0200 (Tue, 01 Aug 2006) | 3 lines Make sure the postinstall action that optionally updates the user's profile on MacOS X actually works correctly in all cases. ........ r51028 | ronald.oussoren | 2006-08-01 23:00:57 +0200 (Tue, 01 Aug 2006) | 4 lines This fixes bug #1527397: PythonLauncher runs scripts with the wrong working directory. It also fixes a bug where PythonLauncher failed to launch scripts when the scriptname (or the path to the script) contains quotes. ........ r51031 | tim.peters | 2006-08-02 05:27:46 +0200 (Wed, 02 Aug 2006) | 2 lines Whitespace normalization. ........ r51032 | tim.peters | 2006-08-02 06:12:36 +0200 (Wed, 02 Aug 2006) | 19 lines Try to squash struct.pack warnings on the "amd64 gentoo trunk" buildbot (& possibly other 64-bit boxes) during test_gzip. The native zlib crc32 function returns an unsigned 32-bit integer, which the Python wrapper implicitly casts to C long. Therefore the same crc can "look negative" on a 32-bit box but "look positive" on a 64-bit box. This patch papers over that platform difference when writing the crc to file. It may be better to change the Python wrapper, either to make the result "look positive" on all platforms (which means it may have to return a Python long at times on a 32-bit box), or to keep the sign the same across boxes. But that would be a visible change in what users see, while the current hack changes no visible behavior (well, apart from stopping the struct deprecation warning). Note that the module-level write32() function is no longer used. ........ r51033 | neal.norwitz | 2006-08-02 06:27:11 +0200 (Wed, 02 Aug 2006) | 4 lines Prevent memory leak on error. Reported by Klocwork #36 ........ r51034 | tim.peters | 2006-08-02 07:20:08 +0200 (Wed, 02 Aug 2006) | 9 lines _Stream.close(): Try to kill struct.pack() warnings when writing the crc to file on the "PPC64 Debian trunk" buildbot when running test_tarfile. This is again a case where the native zlib crc is an unsigned 32-bit int, but the Python wrapper implicitly casts it to signed C long, so that "the sign bit looks different" on different platforms. ........ r51035 | ronald.oussoren | 2006-08-02 08:10:10 +0200 (Wed, 02 Aug 2006) | 2 lines Updated documentation for the script that builds the OSX installer. ........ r51036 | neal.norwitz | 2006-08-02 08:14:22 +0200 (Wed, 02 Aug 2006) | 2 lines _PyWeakref_GetWeakrefCount() now returns a Py_ssize_t instead of long. ........ r51037 | neal.norwitz | 2006-08-02 08:15:10 +0200 (Wed, 02 Aug 2006) | 1 line v is already checked for NULL, so just DECREF it ........ r51038 | neal.norwitz | 2006-08-02 08:19:19 +0200 (Wed, 02 Aug 2006) | 1 line Let us know when there was a problem and the child had to kill the parent ........ r51039 | neal.norwitz | 2006-08-02 08:46:21 +0200 (Wed, 02 Aug 2006) | 5 lines Patch #1519025 and bug #926423: If a KeyboardInterrupt occurs during a socket operation on a socket with a timeout, the exception will be caught correctly. Previously, the exception was not caught. ........ r51040 | neal.norwitz | 2006-08-02 09:09:32 +0200 (Wed, 02 Aug 2006) | 1 line Add some explanation about Klocwork and Coverity static analysis ........ r51041 | anthony.baxter | 2006-08-02 09:43:09 +0200 (Wed, 02 Aug 2006) | 1 line pre-release machinations ........ r51043 | thomas.heller | 2006-08-02 13:35:31 +0200 (Wed, 02 Aug 2006) | 4 lines A few nore words about what ctypes does. Document that using the wrong calling convention can also raise 'ValueError: Procedure called with the wrong number of arguments'. ........ r51045 | thomas.heller | 2006-08-02 14:00:13 +0200 (Wed, 02 Aug 2006) | 1 line Fix a mistake. ........ r51046 | martin.v.loewis | 2006-08-02 15:53:55 +0200 (Wed, 02 Aug 2006) | 3 lines Correction of patch #1455898: In the mbcs decoder, set final=False for stream decoder, but final=True for the decode function. ........ r51049 | tim.peters | 2006-08-02 20:19:35 +0200 (Wed, 02 Aug 2006) | 2 lines Add missing svn:eol-style property to text files. ........ r51079 | neal.norwitz | 2006-08-04 06:50:21 +0200 (Fri, 04 Aug 2006) | 3 lines Bug #1531405, format_exception no longer raises an exception if str(exception) raised an exception. ........ r51080 | neal.norwitz | 2006-08-04 06:58:47 +0200 (Fri, 04 Aug 2006) | 11 lines Bug #1191458: tracing over for loops now produces a line event on each iteration. I'm not positive this is the best way to handle this. I'm also not sure that there aren't other cases where the lnotab is generated incorrectly. It would be great if people that use pdb or tracing could test heavily. Also: * Remove dead/duplicated code that wasn't used/necessary because we already handled the docstring prior to entering the loop. * add some debugging code into the compiler (#if 0'd out). ........ r51081 | neal.norwitz | 2006-08-04 07:09:28 +0200 (Fri, 04 Aug 2006) | 4 lines Bug #1333982: string/number constants were inappropriately stored in the byte code and co_consts even if they were not used, ie immediately popped off the stack. ........ r51082 | neal.norwitz | 2006-08-04 07:12:19 +0200 (Fri, 04 Aug 2006) | 1 line There were really two issues ........ r51084 | fred.drake | 2006-08-04 07:17:21 +0200 (Fri, 04 Aug 2006) | 1 line SF patch #1534048 (bug #1531003): fix typo in error message ........ r51085 | gregory.p.smith | 2006-08-04 07:17:47 +0200 (Fri, 04 Aug 2006) | 3 lines fix typos ........ r51087 | georg.brandl | 2006-08-04 08:03:53 +0200 (Fri, 04 Aug 2006) | 3 lines Fix bug caused by first decrefing, then increfing. ........ r51109 | neil.schemenauer | 2006-08-04 18:20:30 +0200 (Fri, 04 Aug 2006) | 5 lines Fix the 'compiler' package to generate correct code for MAKE_CLOSURE. In the 2.5 development cycle, MAKE_CLOSURE as changed to take free variables as a tuple rather than as individual items on the stack. Closes patch #1534084. ........ r51110 | georg.brandl | 2006-08-04 20:03:37 +0200 (Fri, 04 Aug 2006) | 3 lines Change fix for segfaulting property(), add a NEWS entry and a test. ........ r51111 | georg.brandl | 2006-08-04 20:07:34 +0200 (Fri, 04 Aug 2006) | 3 lines Better fix for bug #1531405, not executing str(value) twice. ........ r51112 | thomas.heller | 2006-08-04 20:17:40 +0200 (Fri, 04 Aug 2006) | 1 line On Windows, make PyErr_Warn an exported function again. ........ r51113 | thomas.heller | 2006-08-04 20:57:34 +0200 (Fri, 04 Aug 2006) | 4 lines Fix #1530448 - fix ctypes build failure on solaris 10. The '-mimpure-text' linker flag is required when linking _ctypes.so. ........ r51114 | thomas.heller | 2006-08-04 21:49:31 +0200 (Fri, 04 Aug 2006) | 3 lines Fix #1534738: win32 debug version of _msi must be _msi_d.pyd, not _msi.pyd. Fix the name of the pdb file as well. ........ r51115 | andrew.kuchling | 2006-08-04 22:37:43 +0200 (Fri, 04 Aug 2006) | 1 line Typo fixes ........ r51116 | andrew.kuchling | 2006-08-04 23:10:03 +0200 (Fri, 04 Aug 2006) | 1 line Fix mangled sentence ........ r51118 | tim.peters | 2006-08-05 00:00:35 +0200 (Sat, 05 Aug 2006) | 2 lines Whitespace normalization. ........ r51119 | bob.ippolito | 2006-08-05 01:59:21 +0200 (Sat, 05 Aug 2006) | 5 lines Fix #1530559, struct.pack raises TypeError where it used to convert. Passing float arguments to struct.pack when integers are expected now triggers a DeprecationWarning. ........ r51123 | georg.brandl | 2006-08-05 08:10:54 +0200 (Sat, 05 Aug 2006) | 3 lines Patch #1534922: correct and enhance unittest docs. ........ r51126 | georg.brandl | 2006-08-06 09:06:33 +0200 (Sun, 06 Aug 2006) | 2 lines Bug #1535182: really test the xreadlines() method of bz2 objects. ........ r51128 | georg.brandl | 2006-08-06 09:26:21 +0200 (Sun, 06 Aug 2006) | 4 lines Bug #1535081: A leading underscore has been added to the names of the md5 and sha modules, so add it in Modules/Setup.dist too. ........ r51129 | georg.brandl | 2006-08-06 10:23:54 +0200 (Sun, 06 Aug 2006) | 3 lines Bug #1535165: fixed a segfault in input() and raw_input() when sys.stdin is closed. ........ r51131 | georg.brandl | 2006-08-06 11:17:16 +0200 (Sun, 06 Aug 2006) | 2 lines Don't produce output in test_builtin. ........ r51133 | andrew.macintyre | 2006-08-06 14:37:03 +0200 (Sun, 06 Aug 2006) | 4 lines test_threading now skips testing alternate thread stack sizes on platforms that don't support changing thread stack size. ........ r51134 | andrew.kuchling | 2006-08-07 00:07:04 +0200 (Mon, 07 Aug 2006) | 2 lines [Patch #1464056] Ensure that we use the panelw library when linking with ncursesw. Once I see how the buildbots react, I'll backport this to 2.4. ........ r51137 | georg.brandl | 2006-08-08 13:52:34 +0200 (Tue, 08 Aug 2006) | 3 lines webbrowser: Silence stderr output if no gconftool or gnome browser found ........ r51138 | georg.brandl | 2006-08-08 13:56:21 +0200 (Tue, 08 Aug 2006) | 7 lines Remove "non-mapping" and "non-sequence" from TypeErrors raised by PyMapping_Size and PySequence_Size. Because len() tries first sequence, then mapping size, it will always raise a "non-mapping object has no len" error which is confusing. ........ r51139 | thomas.heller | 2006-08-08 19:37:00 +0200 (Tue, 08 Aug 2006) | 3 lines memcmp() can return values other than -1, 0, and +1 but tp_compare must not. ........ r51140 | thomas.heller | 2006-08-08 19:39:20 +0200 (Tue, 08 Aug 2006) | 1 line Remove accidently committed, duplicated test. ........ r51147 | andrew.kuchling | 2006-08-08 20:50:14 +0200 (Tue, 08 Aug 2006) | 1 line Reword paragraph to clarify ........ r51148 | andrew.kuchling | 2006-08-08 20:56:08 +0200 (Tue, 08 Aug 2006) | 1 line Move obmalloc item into C API section ........ r51149 | andrew.kuchling | 2006-08-08 21:00:14 +0200 (Tue, 08 Aug 2006) | 1 line 'Other changes' section now has only one item; move the item elsewhere and remove the section ........ r51150 | andrew.kuchling | 2006-08-08 21:00:34 +0200 (Tue, 08 Aug 2006) | 1 line Bump version number ........ r51151 | georg.brandl | 2006-08-08 22:11:22 +0200 (Tue, 08 Aug 2006) | 2 lines Bug #1536828: typo: TypeType should have been StringType. ........ r51153 | georg.brandl | 2006-08-08 22:13:13 +0200 (Tue, 08 Aug 2006) | 2 lines Bug #1536660: separate two words. ........ r51155 | georg.brandl | 2006-08-08 22:48:10 +0200 (Tue, 08 Aug 2006) | 3 lines ``str`` is now the same object as ``types.StringType``. ........ r51156 | tim.peters | 2006-08-09 02:52:26 +0200 (Wed, 09 Aug 2006) | 2 lines Whitespace normalization. ........ r51158 | georg.brandl | 2006-08-09 09:03:22 +0200 (Wed, 09 Aug 2006) | 4 lines Introduce an upper bound on tuple nesting depth in C argument format strings; fixes rest of #1523610. ........ r51160 | martin.v.loewis | 2006-08-09 09:57:39 +0200 (Wed, 09 Aug 2006) | 4 lines __hash__ may now return long int; the final hash value is obtained by invoking hash on the long int. Fixes #1536021. ........ r51168 | andrew.kuchling | 2006-08-09 15:03:41 +0200 (Wed, 09 Aug 2006) | 1 line [Bug #1536021] Mention __hash__ change ........ r51169 | andrew.kuchling | 2006-08-09 15:57:05 +0200 (Wed, 09 Aug 2006) | 1 line [Patch #1534027] Add notes on locale module changes ........ r51170 | andrew.kuchling | 2006-08-09 16:05:35 +0200 (Wed, 09 Aug 2006) | 1 line Add missing 'self' parameters ........ r51171 | andrew.kuchling | 2006-08-09 16:06:19 +0200 (Wed, 09 Aug 2006) | 1 line Reindent code ........ r51172 | armin.rigo | 2006-08-09 16:55:26 +0200 (Wed, 09 Aug 2006) | 2 lines Fix and test for an infinite C recursion. ........ r51173 | ronald.oussoren | 2006-08-09 16:56:33 +0200 (Wed, 09 Aug 2006) | 2 lines It's unlikely that future versions will require _POSIX_C_SOURCE ........ r51178 | armin.rigo | 2006-08-09 17:37:26 +0200 (Wed, 09 Aug 2006) | 2 lines Concatenation on a long string breaks (SF #1526585). ........ r51180 | kurt.kaiser | 2006-08-09 18:46:15 +0200 (Wed, 09 Aug 2006) | 8 lines 1. When used w/o subprocess, all exceptions were preceeded by an error message claiming they were IDLE internal errors (since 1.2a1). 2. Add Ronald Oussoren to CREDITS M NEWS.txt M PyShell.py M CREDITS.txt ........ r51181 | kurt.kaiser | 2006-08-09 19:47:15 +0200 (Wed, 09 Aug 2006) | 4 lines As a slight enhancement to the previous checkin, improve the internal error reporting by moving message to IDLE console. ........ r51182 | andrew.kuchling | 2006-08-09 20:23:14 +0200 (Wed, 09 Aug 2006) | 1 line Typo fix ........ r51183 | kurt.kaiser | 2006-08-09 22:34:46 +0200 (Wed, 09 Aug 2006) | 2 lines ToggleTab dialog was setting indent to 8 even if cancelled (since 1.2a1). ........ r51184 | martin.v.loewis | 2006-08-10 01:42:18 +0200 (Thu, 10 Aug 2006) | 2 lines Add some commentary on -mimpure-text. ........ r51185 | tim.peters | 2006-08-10 02:58:49 +0200 (Thu, 10 Aug 2006) | 2 lines Add missing svn:eol-style property to text files. ........ r51186 | kurt.kaiser | 2006-08-10 03:41:17 +0200 (Thu, 10 Aug 2006) | 2 lines Changing tokenize (39046) to detect dedent broke tabnanny check (since 1.2a1) ........ r51187 | tim.peters | 2006-08-10 05:01:26 +0200 (Thu, 10 Aug 2006) | 13 lines test_copytree_simple(): This was leaving behind two new temp directories each time it ran, at least on Windows. Several changes: explicitly closed all files; wrapped long lines; stopped suppressing errors when removing a file or directory fails (removing /shouldn't/ fail!); and changed what appeared to be incorrect usage of os.removedirs() (that doesn't remove empty directories at and /under/ the given path, instead it must be given an empty leaf directory and then deletes empty directories moving /up/ the path -- could be that the conceptually simpler shutil.rmtree() was really actually intended here). ........
author: Thomas Wouters <thomas@python.org> 2006-08-11 14:57:12 (GMT)
committer: Thomas Wouters <thomas@python.org> 2006-08-11 14:57:12 (GMT)
commit: 0e3f591aeeef9ed715f8770320f4c4c7332a8794 (patch)
tree: c78451f502f6cd6b575a61105165ae9194e29a42 /Modules
parent: 3cf5b1eef99fbd85bbd2bcd2e6223dfec92daf8b (diff)
download: cpython-0e3f591aeeef9ed715f8770320f4c4c7332a8794.zip
cpython-0e3f591aeeef9ed715f8770320f4c4c7332a8794.tar.gz
cpython-0e3f591aeeef9ed715f8770320f4c4c7332a8794.tar.bz2
73 files changed, 2370 insertions, 1223 deletions
diff --git a/Modules/Setup.dist b/Modules/Setup.dist
index 1b2502d..46f4253 100644
--- a/Modules/Setup.dist
+++ b/Modules/Setup.dist
@@ -59,7 +59,7 @@
 #
 # In addition, *static* explicitly declares the following modules to
 # be static.  Lines containing "*static*" and "*shared*" may thus
-# alternate thoughout this file.
+# alternate throughout this file.
 
 # NOTE: As a standard policy, as many modules as can be supported by a
 # platform should be present.  The distribution comes with all modules
@@ -234,16 +234,19 @@ GLHACK=-Dclear=__GLclear
 #rgbimg rgbimgmodule.c	# Read SGI RGB image files (but coded portably)
 
 
-# The md5 module implements the RSA Data Security, Inc. MD5
+# Note that the _md5 and _sha modules are normally only built if the
+# system does not have the OpenSSL libs containing an optimized version.
+
+# The _md5 module implements the RSA Data Security, Inc. MD5
 # Message-Digest Algorithm, described in RFC 1321.  The necessary files
 # md5.c and md5.h are included here.
 
-#md5 md5module.c md5.c
+#_md5 md5module.c md5.c
 
 
-# The sha module implements the SHA checksum algorithm.
+# The _sha module implements the SHA checksum algorithm.
 # (NIST's Secure Hash Algorithm.)
-#sha shamodule.c
+#_sha shamodule.c
 
 
 # SGI IRIX specific modules -- off by default.
diff --git a/Modules/_bsddb.c b/Modules/_bsddb.c
index 9220866..2a3ac5c 100644
--- a/Modules/_bsddb.c
+++ b/Modules/_bsddb.c
@@ -98,12 +98,12 @@
 #error "eek! DBVER can't handle minor versions > 9"
 #endif
 
-#define PY_BSDDB_VERSION "4.4.4"
+#define PY_BSDDB_VERSION "4.4.5"
 static char *rcs_id = "$Id$";
 
 
 #if (PY_VERSION_HEX < 0x02050000)
-#define Py_ssize_t      int
+typedef int Py_ssize_t;
 #endif
 
 #ifdef WITH_THREAD
@@ -528,6 +528,7 @@ static int makeDBError(int err)
     PyObject *errObj = NULL;
     PyObject *errTuple = NULL;
     int exceptionRaised = 0;
+    unsigned int bytes_left;
 
     switch (err) {
         case 0:                     /* successful, no error */      break;
@@ -535,12 +536,15 @@ static int makeDBError(int err)
 #if (DBVER < 41)
         case DB_INCOMPLETE:
 #if INCOMPLETE_IS_WARNING
-            our_strlcpy(errTxt, db_strerror(err), sizeof(errTxt));
-            if (_db_errmsg[0]) {
+            bytes_left = our_strlcpy(errTxt, db_strerror(err), sizeof(errTxt));
+            /* Ensure that bytes_left never goes negative */
+            if (_db_errmsg[0] && bytes_left < (sizeof(errTxt) - 4)) {
+                bytes_left = sizeof(errTxt) - bytes_left - 4 - 1;
+		assert(bytes_left >= 0);
                 strcat(errTxt, " -- ");
-                strcat(errTxt, _db_errmsg);
-                _db_errmsg[0] = 0;
+                strncat(errTxt, _db_errmsg, bytes_left);
             }
+            _db_errmsg[0] = 0;
 #ifdef HAVE_WARNINGS
             exceptionRaised = PyErr_Warn(PyExc_RuntimeWarning, errTxt);
 #else
@@ -588,12 +592,15 @@ static int makeDBError(int err)
     }
 
     if (errObj != NULL) {
-        our_strlcpy(errTxt, db_strerror(err), sizeof(errTxt));
-        if (_db_errmsg[0]) {
+        bytes_left = our_strlcpy(errTxt, db_strerror(err), sizeof(errTxt));
+        /* Ensure that bytes_left never goes negative */
+        if (_db_errmsg[0] && bytes_left < (sizeof(errTxt) - 4)) {
+            bytes_left = sizeof(errTxt) - bytes_left - 4 - 1;
+            assert(bytes_left >= 0);
             strcat(errTxt, " -- ");
-            strcat(errTxt, _db_errmsg);
-            _db_errmsg[0] = 0;
+            strncat(errTxt, _db_errmsg, bytes_left);
         }
+        _db_errmsg[0] = 0;
 
 	errTuple = Py_BuildValue("(is)", err, errTxt);
         PyErr_SetObject(errObj, errTuple);
@@ -798,10 +805,12 @@ newDBObject(DBEnvObject* arg, int flags)
 
     MYDB_BEGIN_ALLOW_THREADS;
     err = db_create(&self->db, db_env, flags);
-    self->db->set_errcall(self->db, _db_errorCallback);
+    if (self->db != NULL) {
+        self->db->set_errcall(self->db, _db_errorCallback);
 #if (DBVER >= 33)
-    self->db->app_private = (void*)self;
+        self->db->app_private = (void*)self;
 #endif
+    }
     MYDB_END_ALLOW_THREADS;
     /* TODO add a weakref(self) to the self->myenvobj->open_child_weakrefs
      * list so that a DBEnv can refuse to close without aborting any open
@@ -2681,12 +2690,13 @@ DB_set_encrypt(DBObject* self, PyObject* args, PyObject* kwargs)
 /*-------------------------------------------------------------- */
 /* Mapping and Dictionary-like access routines */
 
-Py_ssize_t DB_length(DBObject* self)
+Py_ssize_t DB_length(PyObject* _self)
 {
     int err;
     Py_ssize_t size = 0;
     int flags = 0;
     void* sp;
+    DBObject* self = (DBObject*)_self;
 
     if (self->db == NULL) {
         PyObject *t = Py_BuildValue("(is)", 0, "DB object has been closed");
@@ -2720,6 +2730,8 @@ redo_stat_for_length:
      */
     if (size == 0 && (flags & DB_FAST_STAT)) {
         flags = 0;
+        if (!err)
+            free(sp);
         goto redo_stat_for_length;
     }
 
@@ -3864,7 +3876,7 @@ DBEnv_dbremove(DBEnvObject* self, PyObject* args, PyObject* kwargs)
     static char* kwnames[] = { "file", "database", "txn", "flags",
                                      NULL };
 
-    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "ss|Oi:dbremove", kwnames,
+    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "s|zOi:dbremove", kwnames,
 		&file, &database, &txnobj, &flags)) {
 	return NULL;
     }
@@ -3892,7 +3904,7 @@ DBEnv_dbrename(DBEnvObject* self, PyObject* args, PyObject* kwargs)
     static char* kwnames[] = { "file", "database", "newname", "txn",
                                      "flags", NULL };
 
-    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "sss|Oi:dbrename", kwnames,
+    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "szs|Oi:dbrename", kwnames,
 		&file, &database, &newname, &txnobj, &flags)) {
 	return NULL;
     }
@@ -5153,11 +5165,7 @@ static PyMethodDef DB_methods[] = {
 
 
 static PyMappingMethods DB_mapping = {
-#if (PY_VERSION_HEX < 0x02050000)
-        (inquiry)DB_length,          /*mp_length*/
-#else
-        (lenfunc)DB_length,          /*mp_length*/
-#endif
+        DB_length,                   /*mp_length*/
         (binaryfunc)DB_subscript,    /*mp_subscript*/
         (objobjargproc)DB_ass_sub,   /*mp_ass_subscript*/
 };
@@ -5560,15 +5568,13 @@ DBEnv_construct(PyObject* self, PyObject* args)
 static PyObject*
 DBSequence_construct(PyObject* self, PyObject* args, PyObject* kwargs)
 {
-    PyObject* dbobj = NULL;
+    PyObject* dbobj;
     int flags = 0;
     static char* kwnames[] = { "db", "flags", NULL};
 
     if (!PyArg_ParseTupleAndKeywords(args, kwargs, "O|i:DBSequence", kwnames, &dbobj, &flags))
         return NULL;
-    if (dbobj == Py_None)
-        dbobj = NULL;
-    else if (dbobj && !DBObject_Check(dbobj)) {
+    if (!DBObject_Check(dbobj)) {
         makeTypeError("DB", dbobj);
         return NULL;
     }
diff --git a/Modules/_codecsmodule.c b/Modules/_codecsmodule.c
index 32fa82f..405fd7a 100644
--- a/Modules/_codecsmodule.c
+++ b/Modules/_codecsmodule.c
@@ -479,15 +479,20 @@ mbcs_decode(PyObject *self,
 	    PyObject *args)
 {
     const char *data;
-    Py_ssize_t size;
+    Py_ssize_t size, consumed;
     const char *errors = NULL;
+    int final = 0;
+    PyObject *decoded;
 
-    if (!PyArg_ParseTuple(args, "t#|z:mbcs_decode",
-			  &data, &size, &errors))
+    if (!PyArg_ParseTuple(args, "t#|zi:mbcs_decode",
+			  &data, &size, &errors, &final))
 	return NULL;
 
-    return codec_tuple(PyUnicode_DecodeMBCS(data, size, errors),
-		       size);
+    decoded = PyUnicode_DecodeMBCSStateful(
+	data, size, errors, final ? NULL : &consumed);
+    if (!decoded)
+	return NULL;
+    return codec_tuple(decoded, final ? size : consumed);
 }
 
 #endif /* MS_WINDOWS */
diff --git a/Modules/_ctypes/_ctypes.c b/Modules/_ctypes/_ctypes.c
index a0744ff..76d88de 100644
--- a/Modules/_ctypes/_ctypes.c
+++ b/Modules/_ctypes/_ctypes.c
@@ -1,3 +1,8 @@
+/*****************************************************************
+  This file should be kept compatible with Python 2.3, see PEP 291.
+ *****************************************************************/
+
+
 /*
   ToDo:
 
@@ -342,6 +347,14 @@ static PyMethodDef CDataType_methods[] = {
 static PyObject *
 CDataType_repeat(PyObject *self, Py_ssize_t length)
 {
+	if (length < 0)
+		return PyErr_Format(PyExc_ValueError,
+#if (PY_VERSION_HEX < 0x02050000)
+				    "Array length must be >= 0, not %d",
+#else
+				    "Array length must be >= 0, not %zd",
+#endif
+				    length);
 	return CreateArrayType(self, length);
 }
 
@@ -1371,13 +1384,20 @@ SimpleType_new(PyTypeObject *type, PyObject *args, PyObject *kwds)
 		Py_DECREF(result);
 		return NULL;
 	}
+	fmt = getentry(PyString_AS_STRING(proto));
+	if (fmt == NULL) {
+		Py_DECREF(result);
+		PyErr_Format(PyExc_ValueError,
+			     "_type_ '%s' not supported",
+			     PyString_AS_STRING(proto));
+		return NULL;
+	}
+
 	stgdict = (StgDictObject *)PyObject_CallObject(
 		(PyObject *)&StgDict_Type, NULL);
 	if (!stgdict)
 		return NULL;
 
-	fmt = getentry(PyString_AS_STRING(proto));
-
 	stgdict->ffi_type_pointer = *fmt->pffi_type;
 	stgdict->align = fmt->pffi_type->alignment;
 	stgdict->length = 0;
@@ -1620,9 +1640,8 @@ converters_from_argtypes(PyObject *ob)
 
 	for (i = 0; i < nArgs; ++i) {
 		PyObject *tp = PyTuple_GET_ITEM(ob, i);
-		StgDictObject *dict = PyType_stgdict(tp);
 		PyObject *cnv = PyObject_GetAttrString(tp, "from_param");
-		if (!dict || !cnv)
+		if (!cnv)
 			goto argtypes_error_1;
 		PyTuple_SET_ITEM(converters, i, cnv);
 	}
@@ -1633,7 +1652,7 @@ converters_from_argtypes(PyObject *ob)
 	Py_XDECREF(converters);
 	Py_DECREF(ob);
 	PyErr_Format(PyExc_TypeError,
-		     "item %d in _argtypes_ is not a valid C type", i+1);
+		     "item %d in _argtypes_ has no from_param method", i+1);
 	return NULL;
 }
 
@@ -1809,23 +1828,53 @@ GetKeepedObjects(CDataObject *target)
 }
 
 static PyObject *
-unique_key(CDataObject *target, int index)
+unique_key(CDataObject *target, Py_ssize_t index)
 {
-	char string[256]; /* XXX is that enough? */
+	char string[256];
 	char *cp = string;
-	*cp++ = index + '0';
+	size_t bytes_left;
+
+	assert(sizeof(string) - 1 > sizeof(Py_ssize_t) * 2);
+#if (PY_VERSION_HEX < 0x02050000)
+	cp += sprintf(cp, "%x", index);
+#else
+	cp += sprintf(cp, "%x", Py_SAFE_DOWNCAST(index, Py_ssize_t, int));
+#endif
 	while (target->b_base) {
-		*cp++ = target->b_index + '0';
+		bytes_left = sizeof(string) - (cp - string) - 1;
+		/* Hex format needs 2 characters per byte */
+		if (bytes_left < sizeof(Py_ssize_t) * 2) {
+			PyErr_SetString(PyExc_ValueError,
+					"ctypes object structure too deep");
+			return NULL;
+		}
+#if (PY_VERSION_HEX < 0x02050000)
+		cp += sprintf(cp, ":%x", (int)target->b_index);
+#else
+		cp += sprintf(cp, ":%x", Py_SAFE_DOWNCAST(target->b_index, Py_ssize_t, int));
+#endif
 		target = target->b_base;
 	}
 	return PyString_FromStringAndSize(string, cp-string);
 }
-/* Keep a reference to 'keep' in the 'target', at index 'index' */
+
 /*
- * KeepRef travels the target's b_base pointer down to the root,
- * building a sequence of indexes during the path.  The indexes, which are a
- * couple of small integers, are used to build a byte string usable as
- * key int the root object's _objects dict.
+ * Keep a reference to 'keep' in the 'target', at index 'index'.
+ *
+ * If 'keep' is None, do nothing.
+ *
+ * Otherwise create a dictionary (if it does not yet exist) id the root
+ * objects 'b_objects' item, which will store the 'keep' object under a unique
+ * key.
+ *
+ * The unique_key helper travels the target's b_base pointer down to the root,
+ * building a string containing hex-formatted indexes found during traversal,
+ * separated by colons.
+ *
+ * The index tuple is used as a key into the root object's b_objects dict.
+ *
+ * Note: This function steals a refcount of the third argument, even if it
+ * fails!
  */
 static int
 KeepRef(CDataObject *target, Py_ssize_t index, PyObject *keep)
@@ -1846,6 +1895,10 @@ KeepRef(CDataObject *target, Py_ssize_t index, PyObject *keep)
 		return 0;
 	}
 	key = unique_key(target, index);
+	if (key == NULL) {
+		Py_DECREF(keep);
+		return -1;
+	}
 	result = PyDict_SetItem(ob->b_objects, key, keep);
 	Py_DECREF(key);
 	Py_DECREF(keep);
@@ -2134,7 +2187,7 @@ _CData_set(CDataObject *dst, PyObject *type, SETFUNC setfunc, PyObject *value,
 			Py_DECREF(ob);
 			return result;
 		} else if (value == Py_None && PointerTypeObject_Check(type)) {
-			*(void **)dst->b_ptr = NULL;
+			*(void **)ptr = NULL;
 			Py_INCREF(Py_None);
 			return Py_None;
 		} else {
@@ -2611,11 +2664,11 @@ CFuncPtr_FromDll(PyTypeObject *type, PyObject *args, PyObject *kwds)
 
 	*(void **)self->b_ptr = address;
 
+	Py_INCREF((PyObject *)dll); /* for KeepRef */
 	if (-1 == KeepRef((CDataObject *)self, 0, dll)) {
 		Py_DECREF((PyObject *)self);
 		return NULL;
 	}
-	Py_INCREF((PyObject *)dll); /* for KeepRef above */
 
 	Py_INCREF(self);
 	self->callable = (PyObject *)self;
@@ -2751,11 +2804,11 @@ CFuncPtr_new(PyTypeObject *type, PyObject *args, PyObject *kwds)
 	   correctly...
 	*/
 
+	Py_INCREF((PyObject *)self); /* for KeepRef */
 	if (-1 == KeepRef((CDataObject *)self, 0, (PyObject *)self)) {
 		Py_DECREF((PyObject *)self);
 		return NULL;
 	}
-	Py_INCREF((PyObject *)self); /* for KeepRef above */
 
 	return (PyObject *)self;
 }
@@ -3520,6 +3573,7 @@ Array_item(PyObject *_self, Py_ssize_t index)
 	int offset, size;
 	StgDictObject *stgdict;
 
+
 	if (index < 0 || index >= self->b_length) {
 		PyErr_SetString(PyExc_IndexError,
 				"invalid index");
@@ -4019,7 +4073,8 @@ static PyObject *
 Pointer_item(PyObject *_self, Py_ssize_t index)
 {
 	CDataObject *self = (CDataObject *)_self;
-	int size, offset;
+	int size;
+	Py_ssize_t offset;
 	StgDictObject *stgdict, *itemdict;
 	PyObject *proto;
 
@@ -4029,9 +4084,9 @@ Pointer_item(PyObject *_self, Py_ssize_t index)
 		return NULL;
 	}
 
-
 	stgdict = PyObject_stgdict((PyObject *)self);
 	assert(stgdict);
+	assert(stgdict->proto);
 	
 	proto = stgdict->proto;
 	/* XXXXXX MAKE SURE PROTO IS NOT NULL! */
@@ -4039,7 +4094,7 @@ Pointer_item(PyObject *_self, Py_ssize_t index)
 	size = itemdict->size;
 	offset = index * itemdict->size;
 
-	return CData_get(stgdict->proto, stgdict->getfunc, (PyObject *)self,
+	return CData_get(proto, stgdict->getfunc, (PyObject *)self,
 			 index, size, (*(char **)self->b_ptr) + offset);
 }
 
@@ -4048,7 +4103,9 @@ Pointer_ass_item(PyObject *_self, Py_ssize_t index, PyObject *value)
 {
 	CDataObject *self = (CDataObject *)_self;
 	int size;
-	StgDictObject *stgdict;
+	Py_ssize_t offset;
+	StgDictObject *stgdict, *itemdict;
+	PyObject *proto;
 
 	if (value == NULL) {
 		PyErr_SetString(PyExc_TypeError,
@@ -4063,16 +4120,17 @@ Pointer_ass_item(PyObject *_self, Py_ssize_t index, PyObject *value)
 	}
 	
 	stgdict = PyObject_stgdict((PyObject *)self);
-	if (index != 0) {
-		PyErr_SetString(PyExc_IndexError,
-				"invalid index");
-		return -1;
-	}
-	size = stgdict->size / stgdict->length;
+	assert(stgdict);
+	assert(stgdict->proto);
 
-	/* XXXXX Make sure proto is NOT NULL! */
-	return CData_set((PyObject *)self, stgdict->proto, stgdict->setfunc, value,
-			 index, size, *(void **)self->b_ptr);
+	proto = stgdict->proto;
+	/* XXXXXX MAKE SURE PROTO IS NOT NULL! */
+	itemdict = PyType_stgdict(proto);
+	size = itemdict->size;
+	offset = index * itemdict->size;
+
+	return CData_set((PyObject *)self, proto, stgdict->setfunc, value,
+			 index, size, (*(char **)self->b_ptr) + offset);
 }
 
 static PyObject *
@@ -4089,8 +4147,8 @@ Pointer_get_contents(CDataObject *self, void *closure)
 	stgdict = PyObject_stgdict((PyObject *)self);
 	assert(stgdict);
 	return CData_FromBaseObj(stgdict->proto,
-				   (PyObject *)self, 0,
-				   *(void **)self->b_ptr);
+				 (PyObject *)self, 0,
+				 *(void **)self->b_ptr);
 }
 
 static int
@@ -4437,7 +4495,7 @@ cast_check_pointertype(PyObject *arg)
 }
 
 static PyObject *
-cast(void *ptr, PyObject *ctype)
+cast(void *ptr, PyObject *src, PyObject *ctype)
 {
 	CDataObject *result;
 	if (0 == cast_check_pointertype(ctype))
@@ -4445,9 +4503,46 @@ cast(void *ptr, PyObject *ctype)
 	result = (CDataObject *)PyObject_CallFunctionObjArgs(ctype, NULL);
 	if (result == NULL)
 		return NULL;
+
+	/*
+	  The casted objects '_objects' member:
+
+	  It must certainly contain the source objects one.
+	  It must contain the source object itself.
+	 */
+	if (CDataObject_Check(src)) {
+		CDataObject *obj = (CDataObject *)src;
+		/* CData_GetContainer will initialize src.b_objects, we need
+		   this so it can be shared */
+		CData_GetContainer(obj);
+		/* But we need a dictionary! */
+		if (obj->b_objects == Py_None) {
+			Py_DECREF(Py_None);
+			obj->b_objects = PyDict_New();
+			if (obj->b_objects == NULL)
+				goto failed;
+		}
+		result->b_objects = obj->b_objects;
+		if (result->b_objects) {
+			PyObject *index;
+			int rc;
+			Py_INCREF(obj->b_objects);
+			index = PyLong_FromVoidPtr((void *)src);
+			if (index == NULL)
+				goto failed;
+			rc = PyDict_SetItem(result->b_objects, index, src);
+			Py_DECREF(index);
+			if (rc == -1)
+				goto failed;
+		}
+	}
 	/* Should we assert that result is a pointer type? */
 	memcpy(result->b_ptr, &ptr, sizeof(void *));
 	return (PyObject *)result;
+
+  failed:
+	Py_DECREF(result);
+	return NULL;
 }
 
 #ifdef CTYPES_UNICODE
@@ -4469,7 +4564,9 @@ init_ctypes(void)
    ob_type is the metatype (the 'type'), defaults to PyType_Type,
    tp_base is the base type, defaults to 'object' aka PyBaseObject_Type.
 */
+#ifdef WITH_THREAD
 	PyEval_InitThreads();
+#endif
 	m = Py_InitModule3("_ctypes", module_methods, module_docs);
 	if (!m)
 		return;
@@ -4579,7 +4676,7 @@ init_ctypes(void)
 #endif
 	PyModule_AddObject(m, "FUNCFLAG_CDECL", PyInt_FromLong(FUNCFLAG_CDECL));
 	PyModule_AddObject(m, "FUNCFLAG_PYTHONAPI", PyInt_FromLong(FUNCFLAG_PYTHONAPI));
-	PyModule_AddStringConstant(m, "__version__", "0.9.9.6");
+	PyModule_AddStringConstant(m, "__version__", "1.0.0");
 
 	PyModule_AddObject(m, "_memmove_addr", PyLong_FromVoidPtr(memmove));
 	PyModule_AddObject(m, "_memset_addr", PyLong_FromVoidPtr(memset));
@@ -4617,13 +4714,14 @@ init_ctypes(void)
 }
 
 /*****************************************************************
- * replacements for broken Python api functions
+ * replacements for broken Python api functions (in Python 2.3).
+ * See #1047269 Buffer overwrite in PyUnicode_AsWideChar
  */
 
 #ifdef HAVE_WCHAR_H
 
 PyObject *My_PyUnicode_FromWideChar(register const wchar_t *w,
-				    int size)
+				    Py_ssize_t size)
 {
     PyUnicodeObject *unicode;
 
@@ -4655,7 +4753,7 @@ PyObject *My_PyUnicode_FromWideChar(register const wchar_t *w,
 
 int My_PyUnicode_AsWideChar(PyUnicodeObject *unicode,
 			    register wchar_t *w,
-			    int size)
+			    Py_ssize_t size)
 {
     if (unicode == NULL) {
 	PyErr_BadInternalCall();
diff --git a/Modules/_ctypes/_ctypes_test.c b/Modules/_ctypes/_ctypes_test.c
index b10d6fe..99cc7a9 100644
--- a/Modules/_ctypes/_ctypes_test.c
+++ b/Modules/_ctypes/_ctypes_test.c
@@ -1,3 +1,8 @@
+/*****************************************************************
+  This file should be kept compatible with Python 2.3, see PEP 291.
+ *****************************************************************/
+
+
 #include <Python.h>
 
 /*
diff --git a/Modules/_ctypes/callbacks.c b/Modules/_ctypes/callbacks.c
index 4baf3aa..c091d88 100644
--- a/Modules/_ctypes/callbacks.c
+++ b/Modules/_ctypes/callbacks.c
@@ -1,3 +1,7 @@
+/*****************************************************************
+  This file should be kept compatible with Python 2.3, see PEP 291.
+ *****************************************************************/
+
 #include "Python.h"
 #include "compile.h" /* required only for 2.3, as it seems */
 #include "frameobject.h"
@@ -123,7 +127,9 @@ static void _CallPythonObject(void *mem,
 	PyObject *result;
 	PyObject *arglist = NULL;
 	int nArgs;
+#ifdef WITH_THREAD
 	PyGILState_STATE state = PyGILState_Ensure();
+#endif
 
 	nArgs = PySequence_Length(converters);
 	/* Hm. What to return in case of error?
@@ -231,8 +237,9 @@ if (x == NULL) _AddTraceback(what, __FILE__, __LINE__ - 1), PyErr_Print()
 	Py_XDECREF(result);
   Done:
 	Py_XDECREF(arglist);
-	
+#ifdef WITH_THREAD
 	PyGILState_Release(state);
+#endif
 }
 
 static void closure_fcn(ffi_cif *cif,
@@ -341,7 +348,9 @@ void init_callbacks_in_module(PyObject *m)
 static void LoadPython(void)
 {
 	if (!Py_IsInitialized()) {
+#ifdef WITH_THREAD
 		PyEval_InitThreads();
+#endif
 		Py_Initialize();
 	}
 }
@@ -393,12 +402,18 @@ STDAPI DllGetClassObject(REFCLSID rclsid,
 			 LPVOID *ppv)
 {
 	long result;
+#ifdef WITH_THREAD
 	PyGILState_STATE state;
+#endif
 
 	LoadPython();
+#ifdef WITH_THREAD
 	state = PyGILState_Ensure();
+#endif
 	result = Call_GetClassObject(rclsid, riid, ppv);
+#ifdef WITH_THREAD
 	PyGILState_Release(state);
+#endif
 	return result;
 }
 
@@ -450,9 +465,13 @@ long Call_CanUnloadNow(void)
 STDAPI DllCanUnloadNow(void)
 {
 	long result;
+#ifdef WITH_THREAD
 	PyGILState_STATE state = PyGILState_Ensure();
+#endif
 	result = Call_CanUnloadNow();
+#ifdef WITH_THREAD
 	PyGILState_Release(state);
+#endif
 	return result;
 }
 
diff --git a/Modules/_ctypes/callproc.c b/Modules/_ctypes/callproc.c
index 8108498..d6f875b 100644
--- a/Modules/_ctypes/callproc.c
+++ b/Modules/_ctypes/callproc.c
@@ -1,3 +1,8 @@
+/*****************************************************************
+  This file should be kept compatible with Python 2.3, see PEP 291.
+ *****************************************************************/
+
+
 /*
  * History: First version dated from 3/97, derived from my SCMLIB version
  * for win16.
@@ -612,7 +617,9 @@ static int _call_function_pointer(int flags,
 				  void *resmem,
 				  int argcount)
 {
+#ifdef WITH_THREAD
 	PyThreadState *_save = NULL; /* For Py_BLOCK_THREADS and Py_UNBLOCK_THREADS */
+#endif
 	ffi_cif cif;
 	int cc;
 #ifdef MS_WIN32
@@ -644,8 +651,10 @@ static int _call_function_pointer(int flags,
 		return -1;
 	}
 
+#ifdef WITH_THREAD
 	if ((flags & FUNCFLAG_PYTHONAPI) == 0)
 		Py_UNBLOCK_THREADS
+#endif
 #ifdef MS_WIN32
 #ifndef DONT_USE_SEH
 	__try {
@@ -662,8 +671,10 @@ static int _call_function_pointer(int flags,
 	}
 #endif
 #endif
+#ifdef WITH_THREAD
 	if ((flags & FUNCFLAG_PYTHONAPI) == 0)
 		Py_BLOCK_THREADS
+#endif
 #ifdef MS_WIN32
 #ifndef DONT_USE_SEH
 	if (dwExceptionCode) {
@@ -804,14 +815,22 @@ GetComError(HRESULT errcode, GUID *riid, IUnknown *pIunk)
 	PyObject *obj;
 	TCHAR *text;
 
+	/* We absolutely have to release the GIL during COM method calls,
+	   otherwise we may get a deadlock!
+	*/
+#ifdef WITH_THREAD
+	Py_BEGIN_ALLOW_THREADS
+#endif
+
 	hr = pIunk->lpVtbl->QueryInterface(pIunk, &IID_ISupportErrorInfo, (void **)&psei);
 	if (FAILED(hr))
 		goto failed;
+
 	hr = psei->lpVtbl->InterfaceSupportsErrorInfo(psei, riid);
 	psei->lpVtbl->Release(psei);
-
 	if (FAILED(hr))
 		goto failed;
+
 	hr = GetErrorInfo(0, &pei);
 	if (hr != S_OK)
 		goto failed;
@@ -822,24 +841,27 @@ GetComError(HRESULT errcode, GUID *riid, IUnknown *pIunk)
 	pei->lpVtbl->GetHelpFile(pei, &helpfile);
 	pei->lpVtbl->GetSource(pei, &source);
 
+	pei->lpVtbl->Release(pei);
+
   failed:
-	if (pei)
-		pei->lpVtbl->Release(pei);
+#ifdef WITH_THREAD
+	Py_END_ALLOW_THREADS
+#endif
 
 	progid = NULL;
 	ProgIDFromCLSID(&guid, &progid);
 
-/* XXX Is COMError derived from WindowsError or not? */
 	text = FormatError(errcode);
+	obj = Py_BuildValue(
 #ifdef _UNICODE
-	obj = Py_BuildValue("iu(uuuiu)",
+		"iu(uuuiu)",
 #else
-	obj = Py_BuildValue("is(uuuiu)",
+		"is(uuuiu)",
 #endif
-			    errcode,
-			    text,
-			    descr, source, helpfile, helpcontext,
-			    progid);
+		errcode,
+		text,
+		descr, source, helpfile, helpcontext,
+		progid);
 	if (obj) {
 		PyErr_SetObject(ComError, obj);
 		Py_DECREF(obj);
@@ -1138,7 +1160,7 @@ call_commethod(PyObject *self, PyObject *args)
 }
 
 static char copy_com_pointer_doc[] =
-"CopyComPointer(a, b) -> integer\n";
+"CopyComPointer(src, dst) -> HRESULT value\n";
 
 static PyObject *
 copy_com_pointer(PyObject *self, PyObject *args)
@@ -1444,7 +1466,72 @@ set_conversion_mode(PyObject *self, PyObject *args)
 }
 #endif
 
+static PyObject *
+resize(PyObject *self, PyObject *args)
+{
+	CDataObject *obj;
+	StgDictObject *dict;
+	Py_ssize_t size;
+
+	if (!PyArg_ParseTuple(args,
+#if (PY_VERSION_HEX < 0x02050000)
+			      "Oi:resize",
+#else
+			      "On:resize",
+#endif
+			      (PyObject *)&obj, &size))
+		return NULL;
+
+	dict = PyObject_stgdict((PyObject *)obj);
+	if (dict == NULL) {
+		PyErr_SetString(PyExc_TypeError,
+				"excepted ctypes instance");
+		return NULL;
+	}
+	if (size < dict->size) {
+		PyErr_Format(PyExc_ValueError,
+#if PY_VERSION_HEX < 0x02050000
+			     "minimum size is %d",
+#else
+			     "minimum size is %zd",
+#endif
+			     dict->size);
+		return NULL;
+	}
+	if (obj->b_needsfree == 0) {
+		PyErr_Format(PyExc_ValueError,
+			     "Memory cannot be resized because this object doesn't own it");
+		return NULL;
+	}
+	if (size <= sizeof(obj->b_value)) {
+		/* internal default buffer is large enough */
+		obj->b_size = size;
+		goto done;
+	}
+	if (obj->b_size <= sizeof(obj->b_value)) {
+		/* We are currently using the objects default buffer, but it
+		   isn't large enough any more. */
+		void *ptr = PyMem_Malloc(size);
+		if (ptr == NULL)
+			return PyErr_NoMemory();
+		memset(ptr, 0, size);
+		memmove(ptr, obj->b_ptr, obj->b_size);
+		obj->b_ptr = ptr;
+		obj->b_size = size;
+	} else {
+		void * ptr = PyMem_Realloc(obj->b_ptr, size);
+		if (ptr == NULL)
+			return PyErr_NoMemory();
+		obj->b_ptr = ptr;
+		obj->b_size = size;
+	}
+  done:
+	Py_INCREF(Py_None);
+	return Py_None;
+}
+
 PyMethodDef module_methods[] = {
+	{"resize", resize, METH_VARARGS, "Resize the memory buffer of a ctypes instance"},
 #ifdef CTYPES_UNICODE
 	{"set_conversion_mode", set_conversion_mode, METH_VARARGS, set_conversion_mode_doc},
 #endif
diff --git a/Modules/_ctypes/cfield.c b/Modules/_ctypes/cfield.c
index ae0290f..3595b05 100644
--- a/Modules/_ctypes/cfield.c
+++ b/Modules/_ctypes/cfield.c
@@ -1,3 +1,7 @@
+/*****************************************************************
+  This file should be kept compatible with Python 2.3, see PEP 291.
+ *****************************************************************/
+
 #include "Python.h"
 
 #include <ffi.h>
@@ -61,10 +65,10 @@ CField_FromDesc(PyObject *desc, int index,
 	}
 	if (bitsize /* this is a bitfield request */
 	    && *pfield_size /* we have a bitfield open */
-#ifdef MS_WIN32
+#if defined(MS_WIN32) && !defined(__MINGW32__)
 	    && dict->size * 8 == *pfield_size /* MSVC */
 #else
-	    && dict->size * 8 <= *pfield_size /* GCC */
+	    && dict->size * 8 <= *pfield_size /* GCC, MINGW */
 #endif
 	    && (*pbitofs + bitsize) <= *pfield_size) {
 		/* continue bit field */
@@ -120,7 +124,7 @@ CField_FromDesc(PyObject *desc, int index,
 	self->getfunc = getfunc;
 	self->index = index;
 
-	Py_XINCREF(proto);
+	Py_INCREF(proto);
 	self->proto = proto;
 
 	switch (fieldtype) {
@@ -1482,16 +1486,27 @@ P_set(void *ptr, PyObject *value, unsigned size)
 		*(void **)ptr = NULL;
 		_RET(value);
 	}
-	
-	v = PyLong_AsVoidPtr(value);
-	if (PyErr_Occurred()) {
-		/* prevent the SystemError: bad argument to internal function */
-		if (!PyInt_Check(value) && !PyLong_Check(value)) {
-			PyErr_SetString(PyExc_TypeError,
-					"cannot be converted to pointer");
-		}
+
+	if (!PyInt_Check(value) && !PyLong_Check(value)) {
+		PyErr_SetString(PyExc_TypeError,
+				"cannot be converted to pointer");
 		return NULL;
 	}
+
+#if SIZEOF_VOID_P <= SIZEOF_LONG
+	v = (void *)PyInt_AsUnsignedLongMask(value);
+#else
+#ifndef HAVE_LONG_LONG
+#   error "PyLong_AsVoidPtr: sizeof(void*) > sizeof(long), but no long long"
+#elif SIZEOF_LONG_LONG < SIZEOF_VOID_P
+#   error "PyLong_AsVoidPtr: sizeof(PY_LONG_LONG) < sizeof(void*)"
+#endif
+	v = (void *)PyInt_AsUnsignedLongLongMask(value);
+#endif
+
+	if (PyErr_Occurred())
+		return NULL;
+
 	*(void **)ptr = v;
 	_RET(value);
 }
diff --git a/Modules/_ctypes/ctypes.h b/Modules/_ctypes/ctypes.h
index 7988595..303eda3 100644
--- a/Modules/_ctypes/ctypes.h
+++ b/Modules/_ctypes/ctypes.h
@@ -1,4 +1,6 @@
-/******************************************************************/
+/*****************************************************************
+  This file should be kept compatible with Python 2.3, see PEP 291.
+ *****************************************************************/
 
 #if (PY_VERSION_HEX < 0x02050000)
 typedef int Py_ssize_t;
@@ -59,7 +61,7 @@ struct tagCDataObject {
 	Py_ssize_t b_length;	/* number of references we need */
 	Py_ssize_t b_index;	/* index of this object into base's
 				   b_object list */
-	PyObject *b_objects;	/* list of references we need to keep */
+	PyObject *b_objects;	/* dictionary of references we need to keep, or Py_None */
 	union value b_value;
 };
 
@@ -181,6 +183,7 @@ typedef struct {
 	PyObject *proto;		/* a type or NULL */
 	GETFUNC getfunc;		/* getter function if proto is NULL */
 	SETFUNC setfunc;		/* setter function if proto is NULL */
+	int anonymous;
 } CFieldObject;
 
 /* A subclass of PyDictObject, used as the instance dictionary of ctypes
@@ -374,8 +377,8 @@ extern char *conversion_mode_errors;
 #  undef PyUnicode_AsWideChar
 #  define PyUnicode_AsWideChar My_PyUnicode_AsWideChar
 
-extern PyObject *My_PyUnicode_FromWideChar(const wchar_t *, int);
-extern int My_PyUnicode_AsWideChar(PyUnicodeObject *, wchar_t *, int);
+extern PyObject *My_PyUnicode_FromWideChar(const wchar_t *, Py_ssize_t);
+extern int My_PyUnicode_AsWideChar(PyUnicodeObject *, wchar_t *, Py_ssize_t);
 
 #endif
 
diff --git a/Modules/_ctypes/ctypes_dlfcn.h b/Modules/_ctypes/ctypes_dlfcn.h
index 7f632c5..d8bf904 100644
--- a/Modules/_ctypes/ctypes_dlfcn.h
+++ b/Modules/_ctypes/ctypes_dlfcn.h
@@ -1,4 +1,6 @@
-/******************************************************************/
+/*****************************************************************
+  This file should be kept compatible with Python 2.3, see PEP 291.
+ *****************************************************************/
 
 #ifndef _CTYPES_DLFCN_H_
 #define _CTYPES_DLFCN_H_
diff --git a/Modules/_ctypes/libffi/configure b/Modules/_ctypes/libffi/configure
index 9fdd654..9eded5a 100755
--- a/Modules/_ctypes/libffi/configure
+++ b/Modules/_ctypes/libffi/configure
@@ -934,7 +934,7 @@ esac
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi
-    cd $ac_popdir
+    cd "$ac_popdir"
   done
 fi
 
@@ -1973,8 +1973,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2032,8 +2031,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2149,8 +2147,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2204,8 +2201,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2250,8 +2246,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2295,8 +2290,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2623,8 +2617,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2794,8 +2787,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2862,8 +2854,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3047,8 +3038,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3111,8 +3101,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3290,8 +3279,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3408,8 +3396,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3483,6 +3470,12 @@ fi
 
 TARGETDIR="unknown"
 case "$host" in
+mips*-*-openbsd*) TARGET=MIPS; TARGETDIR=mips;;
+sparc-*-openbsd*) TARGET=SPARC; TARGETDIR=sparc;;
+sparc64-*-openbsd*) TARGET=SPARC; TARGETDIR=sparc;;
+alpha*-*-openbsd*) TARGET=ALPHA; TARGETDIR=alpha;;
+m68k-*-openbsd*) TARGET=M68K; TARGETDIR=m68k;;
+powerpc-*-openbsd*) TARGET=POWERPC; TARGETDIR=powerpc;;
 i*86-*-darwin*) TARGET=X86_DARWIN; TARGETDIR=x86;;
 i*86-*-linux*) TARGET=X86; TARGETDIR=x86;;
 i*86-*-gnu*) TARGET=X86; TARGETDIR=x86;;
@@ -3575,8 +3568,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3777,8 +3769,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3841,8 +3832,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3923,8 +3913,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4065,8 +4054,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4202,8 +4190,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4265,8 +4252,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4306,8 +4292,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4363,8 +4348,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4404,8 +4388,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4469,8 +4452,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4501,10 +4483,8 @@ See \`config.log' for more details." >&2;}
 esac
 else
   if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
    { (exit 1); exit 1; }; }
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -4616,8 +4596,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4679,8 +4658,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4720,8 +4698,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4777,8 +4754,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4818,8 +4794,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4883,8 +4858,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4915,10 +4889,8 @@ See \`config.log' for more details." >&2;}
 esac
 else
   if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
    { (exit 1); exit 1; }; }
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -5048,8 +5020,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5091,8 +5062,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5149,8 +5119,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5282,8 +5251,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5349,8 +5317,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6309,11 +6276,6 @@ esac
 
 
 
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
   # Let's still pretend it is `configure' which instantiates (i.e., don't
   # use $as_me), people would be surprised to read:
   #    /* config.h.  Generated by config.status.  */
@@ -6352,6 +6314,12 @@ echo "$as_me: error: cannot find input file: $f" >&2;}
 	 fi;;
       esac
     done` || { (exit 1); exit 1; }
+
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
   sed "$ac_vpsub
diff --git a/Modules/_ctypes/libffi/configure.ac b/Modules/_ctypes/libffi/configure.ac
index a0d7513..384959e 100644
--- a/Modules/_ctypes/libffi/configure.ac
+++ b/Modules/_ctypes/libffi/configure.ac
@@ -21,6 +21,12 @@ AC_FUNC_MMAP_BLACKLIST
 
 TARGETDIR="unknown"
 case "$host" in
+mips*-*-openbsd*) TARGET=MIPS; TARGETDIR=mips;;
+sparc-*-openbsd*) TARGET=SPARC; TARGETDIR=sparc;;
+sparc64-*-openbsd*) TARGET=SPARC; TARGETDIR=sparc;;
+alpha*-*-openbsd*) TARGET=ALPHA; TARGETDIR=alpha;;
+m68k-*-openbsd*) TARGET=M68K; TARGETDIR=m68k;;
+powerpc-*-openbsd*) TARGET=POWERPC; TARGETDIR=powerpc;;
 i*86-*-darwin*) TARGET=X86_DARWIN; TARGETDIR=x86;;
 i*86-*-linux*) TARGET=X86; TARGETDIR=x86;;
 i*86-*-gnu*) TARGET=X86; TARGETDIR=x86;;
diff --git a/Modules/_ctypes/libffi/src/x86/darwin.S b/Modules/_ctypes/libffi/src/x86/darwin.S
index c5e55b5..d91bdc0 100644
--- a/Modules/_ctypes/libffi/src/x86/darwin.S
+++ b/Modules/_ctypes/libffi/src/x86/darwin.S
@@ -35,6 +35,13 @@
 #include <fficonfig.h>
 #include <ffi.h>
 
+#ifdef PyObjC_STRICT_DEBUGGING
+  /* XXX: Debugging of stack alignment, to be removed */
+#define ASSERT_STACK_ALIGNED movdqa -16(%esp), %xmm0
+#else
+#define ASSERT_STACK_ALIGNED 
+#endif
+
 .text
 
 .globl _ffi_prep_args
@@ -47,30 +54,41 @@ _ffi_call_SYSV:
         pushl %ebp
 .LCFI0:
         movl  %esp,%ebp
+	subl  $8,%esp
+	ASSERT_STACK_ALIGNED
 .LCFI1:
 	/* Make room for all of the new args.  */
 	movl  16(%ebp),%ecx
 	subl  %ecx,%esp
 
+	ASSERT_STACK_ALIGNED
+
 	movl  %esp,%eax
 
 	/* Place all of the ffi_prep_args in position  */
+	subl  $8,%esp
 	pushl 12(%ebp)
 	pushl %eax
 	call  *8(%ebp)
 
+	ASSERT_STACK_ALIGNED
+
 	/* Return stack to previous state and call the function  */
-	addl  $8,%esp	
+	addl  $16,%esp
 
-	call  *28(%ebp)
+	ASSERT_STACK_ALIGNED
 
-	/* Remove the space we pushed for the args  */
+	call  *28(%ebp)
+	
+	/* XXX: return returns return with 'ret $4', that upsets the stack! */
 	movl  16(%ebp),%ecx
 	addl  %ecx,%esp
 
+
 	/* Load %ecx with the return type code  */
 	movl  20(%ebp),%ecx	
 
+
 	/* If the return value pointer is NULL, assume no return value.  */
 	cmpl  $0,24(%ebp)
 	jne   retint
@@ -117,17 +135,47 @@ retlongdouble:
 	
 retint64:	
 	cmpl  $FFI_TYPE_SINT64,%ecx
-        jne   retstruct
+        jne   retstruct1b
 	/* Load %ecx with the pointer to storage for the return value  */
 	movl  24(%ebp),%ecx	
 	movl  %eax,0(%ecx)
 	movl  %edx,4(%ecx)
+	jmp   epilogue
+
+retstruct1b:
+   cmpl $FFI_TYPE_SINT8,%ecx
+   jne  retstruct2b
+   movl 24(%ebp),%ecx
+   movb  %al,0(%ecx)
+   jmp  epilogue
+
+retstruct2b:
+   cmpl $FFI_TYPE_SINT16,%ecx
+   jne  retstruct
+   movl 24(%ebp),%ecx
+   movw %ax,0(%ecx)
+   jmp  epilogue
 	
 retstruct:
+   cmpl $FFI_TYPE_STRUCT,%ecx
+   jne  noretval
 	/* Nothing to do!  */
 
+	subl $4,%esp
+
+	ASSERT_STACK_ALIGNED
+
+	addl $8,%esp
+	movl %ebp, %esp
+	popl %ebp
+	ret
+
 noretval:
 epilogue:
+	ASSERT_STACK_ALIGNED
+	addl $8, %esp
+
+
         movl %ebp,%esp
         popl %ebp
         ret
diff --git a/Modules/_ctypes/libffi/src/x86/ffi_darwin.c b/Modules/_ctypes/libffi/src/x86/ffi_darwin.c
index 4f82b3a..c9742d8 100644
--- a/Modules/_ctypes/libffi/src/x86/ffi_darwin.c
+++ b/Modules/_ctypes/libffi/src/x86/ffi_darwin.c
@@ -140,7 +140,7 @@ ffi_status ffi_prep_cif_machdep(ffi_cif *cif)
   switch (cif->rtype->type)
     {
     case FFI_TYPE_VOID:
-#if !defined(X86_WIN32) 
+#if !defined(X86_WIN32)  && !defined(X86_DARWIN)
     case FFI_TYPE_STRUCT:
 #endif
     case FFI_TYPE_SINT64:
@@ -154,7 +154,7 @@ ffi_status ffi_prep_cif_machdep(ffi_cif *cif)
       cif->flags = FFI_TYPE_SINT64;
       break;
 
-#if defined X86_WIN32  
+#if defined(X86_WIN32) || defined(X86_DARWIN)
 
     case FFI_TYPE_STRUCT:
       if (cif->rtype->size == 1)
@@ -186,10 +186,11 @@ ffi_status ffi_prep_cif_machdep(ffi_cif *cif)
     }
 
   /* Darwin: The stack needs to be aligned to a multiple of 16 bytes */
-#if 0
+#if 1
   cif->bytes = (cif->bytes + 15) & ~0xF;
 #endif
 
+
   return FFI_OK;
 }
 
@@ -221,7 +222,6 @@ void ffi_call(/*@dependent@*/ ffi_cif *cif,
 	      /*@dependent@*/ void **avalue)
 {
   extended_cif ecif;
-  int flags;
 
   ecif.cif = cif;
   ecif.avalue = avalue;
@@ -238,20 +238,6 @@ void ffi_call(/*@dependent@*/ ffi_cif *cif,
   else
     ecif.rvalue = rvalue;
 
-  flags = cif->flags;
-  if (flags == FFI_TYPE_STRUCT) {
-    if (cif->rtype->size == 8) {
-	flags = FFI_TYPE_SINT64;
-    } else if (cif->rtype->size == 4) {
-        flags = FFI_TYPE_INT;
-    } else if (cif->rtype->size == 2) {
-        flags = FFI_TYPE_INT;
-    } else if (cif->rtype->size == 1) {
-        flags = FFI_TYPE_INT;
-    }
-  }
-
-  
   switch (cif->abi) 
     {
     case FFI_SYSV:
@@ -260,8 +246,8 @@ void ffi_call(/*@dependent@*/ ffi_cif *cif,
        * block is a multiple of 16. Then add 8 to compensate for local variables
        * in ffi_call_SYSV.
        */
-      ffi_call_SYSV(ffi_prep_args, &ecif, ALIGN(cif->bytes, 16) +8, 
-		    flags, ecif.rvalue, fn);
+      ffi_call_SYSV(ffi_prep_args, &ecif, cif->bytes, 
+		    cif->flags, ecif.rvalue, fn);
       /*@=usedef@*/
       break;
 #ifdef X86_WIN32
@@ -281,8 +267,6 @@ void ffi_call(/*@dependent@*/ ffi_cif *cif,
 
 /** private members **/
 
-static void ffi_prep_incoming_args_SYSV (char *stack, void **ret,
-					 void** args, ffi_cif* cif);
 static void ffi_closure_SYSV (ffi_closure *)
      __attribute__ ((regparm(1)));
 #if !FFI_NO_RAW_API
@@ -290,6 +274,48 @@ static void ffi_closure_raw_SYSV (ffi_raw_closure *)
      __attribute__ ((regparm(1)));
 #endif
 
+/*@-exportheader@*/
+static inline void 
+ffi_prep_incoming_args_SYSV(char *stack, void **rvalue,
+			    void **avalue, ffi_cif *cif)
+/*@=exportheader@*/
+{
+  register unsigned int i;
+  register void **p_argv;
+  register char *argp;
+  register ffi_type **p_arg;
+
+  argp = stack;
+
+  if (retval_on_stack(cif->rtype)) {
+    *rvalue = *(void **) argp;
+    argp += 4;
+  }
+
+  p_argv = avalue;
+
+  for (i = cif->nargs, p_arg = cif->arg_types; (i != 0); i--, p_arg++)
+    {
+      size_t z;
+
+      /* Align if necessary */
+      if ((sizeof(int) - 1) & (unsigned) argp) {
+	argp = (char *) ALIGN(argp, sizeof(int));
+      }
+
+      z = (*p_arg)->size;
+
+      /* because we're little endian, this is what it turns into.   */
+
+      *p_argv = (void*) argp;
+
+      p_argv++;
+      argp += z;
+    }
+  
+  return;
+}
+
 /* This function is jumped to by the trampoline */
 
 static void
@@ -302,10 +328,10 @@ ffi_closure_SYSV (closure)
   // our various things...
   ffi_cif       *cif;
   void         **arg_area;
-  unsigned short rtype;
   void          *resp = (void*)&res;
   void *args = __builtin_dwarf_cfa ();
 
+
   cif         = closure->cif;
   arg_area    = (void**) alloca (cif->nargs * sizeof (void*));  
 
@@ -319,94 +345,52 @@ ffi_closure_SYSV (closure)
   
   (closure->fun) (cif, resp, arg_area, closure->user_data);
 
-  rtype = cif->flags;
-
-  if (!retval_on_stack(cif->rtype) && cif->flags == FFI_TYPE_STRUCT) {
-      if (cif->rtype->size == 8) {
-         rtype = FFI_TYPE_SINT64;
-      } else {
-         rtype = FFI_TYPE_INT;
-      }
-  }
-
   /* now, do a generic return based on the value of rtype */
-  if (rtype == FFI_TYPE_INT)
+  if (cif->flags == FFI_TYPE_INT)
     {
       asm ("movl (%0),%%eax" : : "r" (resp) : "eax");
     }
-  else if (rtype == FFI_TYPE_FLOAT)
+  else if (cif->flags == FFI_TYPE_FLOAT)
     {
       asm ("flds (%0)" : : "r" (resp) : "st" );
     }
-  else if (rtype == FFI_TYPE_DOUBLE)
+  else if (cif->flags == FFI_TYPE_DOUBLE)
     {
       asm ("fldl (%0)" : : "r" (resp) : "st", "st(1)" );
     }
-  else if (rtype == FFI_TYPE_LONGDOUBLE)
+  else if (cif->flags == FFI_TYPE_LONGDOUBLE)
     {
       asm ("fldt (%0)" : : "r" (resp) : "st", "st(1)" );
     }
-  else if (rtype == FFI_TYPE_SINT64)
+  else if (cif->flags == FFI_TYPE_SINT64)
     {
       asm ("movl 0(%0),%%eax;"
 	   "movl 4(%0),%%edx" 
 	   : : "r"(resp)
 	   : "eax", "edx");
     }
-#ifdef X86_WIN32
-  else if (rtype == FFI_TYPE_SINT8) /* 1-byte struct  */
+#if defined(X86_WIN32) || defined(X86_DARWIN)
+  else if (cif->flags == FFI_TYPE_SINT8) /* 1-byte struct  */
     {
       asm ("movsbl (%0),%%eax" : : "r" (resp) : "eax");
     }
-  else if (rtype == FFI_TYPE_SINT16) /* 2-bytes struct */
+  else if (cif->flags == FFI_TYPE_SINT16) /* 2-bytes struct */
     {
       asm ("movswl (%0),%%eax" : : "r" (resp) : "eax");
     }
 #endif
-}
 
-/*@-exportheader@*/
-static void 
-ffi_prep_incoming_args_SYSV(char *stack, void **rvalue,
-			    void **avalue, ffi_cif *cif)
-/*@=exportheader@*/
-{
-  register unsigned int i;
-  register void **p_argv;
-  register char *argp;
-  register ffi_type **p_arg;
-
-  argp = stack;
-
-  if (retval_on_stack(cif->rtype)) {
-    *rvalue = *(void **) argp;
-    argp += 4;
-  }
-
-  p_argv = avalue;
-
-  for (i = cif->nargs, p_arg = cif->arg_types; (i != 0); i--, p_arg++)
+  else if (cif->flags == FFI_TYPE_STRUCT)
     {
-      size_t z;
-
-      /* Align if necessary */
-      if ((sizeof(int) - 1) & (unsigned) argp) {
-	argp = (char *) ALIGN(argp, sizeof(int));
-      }
-
-      z = (*p_arg)->size;
-
-      /* because we're little endian, this is what it turns into.   */
-
-      *p_argv = (void*) argp;
-
-      p_argv++;
-      argp += z;
+      asm ("lea -8(%ebp),%esp;"
+	   "pop %esi;"
+	   "pop %edi;"
+	   "pop %ebp;"
+	   "ret $4"); 
     }
-  
-  return;
 }
 
+
 /* How to make a trampoline.  Derived from gcc/config/i386/i386.c. */
 
 #define FFI_INIT_TRAMPOLINE(TRAMP,FUN,CTX) \
diff --git a/Modules/_ctypes/libffi_msvc/ffi.c b/Modules/_ctypes/libffi_msvc/ffi.c
index e5600b2..9af6b71 100644
--- a/Modules/_ctypes/libffi_msvc/ffi.c
+++ b/Modules/_ctypes/libffi_msvc/ffi.c
@@ -227,11 +227,7 @@ ffi_closure_SYSV (ffi_closure *closure, int *argp)
   void         **arg_area;
   unsigned short rtype;
   void          *resp = (void*)&res;
-//#ifdef _MSC_VER
   void *args = &argp[1];
-//#else
-//  void *args = __builtin_dwarf_cfa ();
-//#endif
 
   cif         = closure->cif;
   arg_area    = (void**) alloca (cif->nargs * sizeof (void*));  
@@ -353,10 +349,6 @@ ffi_prep_incoming_args_SYSV(char *stack, void **rvalue,
 
 /* How to make a trampoline.  Derived from gcc/config/i386/i386.c. */
 
-/* MOV EDX, ESP is 0x8b 0xd4 */
-
-//#ifdef _MSC_VER
-
 #define FFI_INIT_TRAMPOLINE(TRAMP,FUN,CTX,BYTES) \
 { unsigned char *__tramp = (unsigned char*)(TRAMP); \
    unsigned int  __fun = (unsigned int)(FUN); \
@@ -365,26 +357,13 @@ ffi_prep_incoming_args_SYSV(char *stack, void **rvalue,
    *(unsigned char*)  &__tramp[0] = 0xb9; \
    *(unsigned int*)   &__tramp[1] = __ctx; /* mov ecx, __ctx */ \
    *(unsigned char*)  &__tramp[5] = 0x8b; \
-   *(unsigned char*)  &__tramp[6] = 0xd4; \
+   *(unsigned char*)  &__tramp[6] = 0xd4; /* mov edx, esp */ \
    *(unsigned char*)  &__tramp[7] = 0xe8; \
    *(unsigned int*)   &__tramp[8] = __dis; /* call __fun  */ \
    *(unsigned char*)  &__tramp[12] = 0xC2; /* ret BYTES */ \
    *(unsigned short*) &__tramp[13] = BYTES; \
  }
 
-//#else
-//#define FFI_INIT_TRAMPOLINE(TRAMP,FUN,CTX,BYTES) \
-//({ unsigned char *__tramp = (unsigned char*)(TRAMP); \
-//   unsigned int  __fun = (unsigned int)(FUN); \
-//   unsigned int  __ctx = (unsigned int)(CTX); \
-//   unsigned int  __dis = __fun - ((unsigned int) __tramp + FFI_TRAMPOLINE_SIZE); \
-//   *(unsigned char*) &__tramp[0] = 0xb8; \
-//   *(unsigned int*)  &__tramp[1] = __ctx; /* movl __ctx, %eax */ \
-//   *(unsigned char *)  &__tramp[5] = 0xe9; \
-//   *(unsigned int*)  &__tramp[6] = __dis; /* jmp __fun  */ \
-// })
-//#endif
-
 /* the cif must already be prep'ed */
 
 ffi_status
diff --git a/Modules/_ctypes/libffi_msvc/fficonfig.h b/Modules/_ctypes/libffi_msvc/fficonfig.h
index 25b6305..c14f653 100644
--- a/Modules/_ctypes/libffi_msvc/fficonfig.h
+++ b/Modules/_ctypes/libffi_msvc/fficonfig.h
@@ -3,8 +3,10 @@
 /* fficonfig.h.  Generated automatically by configure.  */
 /* fficonfig.h.in.  Generated automatically from configure.in by autoheader.  */
 
-/* Defines for MSVC */
+/* Define this for MSVC, but not for mingw32! */
+#ifdef _MSC_VER
 #define __attribute__(x) /* */
+#endif
 #define alloca _alloca
 
 /*----------------------------------------------------------------*/
diff --git a/Modules/_ctypes/libffi_msvc/ffitarget.h b/Modules/_ctypes/libffi_msvc/ffitarget.h
index 57d275b..78c0c37 100644
--- a/Modules/_ctypes/libffi_msvc/ffitarget.h
+++ b/Modules/_ctypes/libffi_msvc/ffitarget.h
@@ -71,11 +71,7 @@ typedef enum ffi_abi {
 #define FFI_TRAMPOLINE_SIZE 24
 #define FFI_NATIVE_RAW_API 0
 #else
-#ifdef _MSC_VER
-# define FFI_TRAMPOLINE_SIZE 15
-#else
-# define FFI_TRAMPOLINE_SIZE 10
-#endif
+#define FFI_TRAMPOLINE_SIZE 15
 #define FFI_NATIVE_RAW_API 1	/* x86 has native raw api support */
 #endif
 
diff --git a/Modules/_ctypes/libffi_msvc/mingwin32.S b/Modules/_ctypes/libffi_msvc/mingwin32.S
deleted file mode 100644
index e71f2b2..0000000
--- a/Modules/_ctypes/libffi_msvc/mingwin32.S
+++ /dev/null
@@ -1,228 +0,0 @@
-/* -----------------------------------------------------------------------
-   win32.S - Copyright (c) 1996, 1998, 2001, 2002  Red Hat, Inc.
-	     Copyright (c) 2001  John Beniton
-	     Copyright (c) 2002  Ranjit Mathew
-			
- 
-   X86 Foreign Function Interface
- 
-   Permission is hereby granted, free of charge, to any person obtaining
-   a copy of this software and associated documentation files (the
-   ``Software''), to deal in the Software without restriction, including
-   without limitation the rights to use, copy, modify, merge, publish,
-   distribute, sublicense, and/or sell copies of the Software, and to
-   permit persons to whom the Software is furnished to do so, subject to
-   the following conditions:
- 
-   The above copyright notice and this permission notice shall be included
-   in all copies or substantial portions of the Software.
- 
-   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS
-   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-   IN NO EVENT SHALL CYGNUS SOLUTIONS BE LIABLE FOR ANY CLAIM, DAMAGES OR
-   OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-   ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-   OTHER DEALINGS IN THE SOFTWARE.
-   ----------------------------------------------------------------------- */
- 
-#define LIBFFI_ASM
-#include <fficonfig.h>
-#include <ffi.h>
- 
-.text
- 
-.globl ffi_prep_args
- 
-        # This assumes we are using gas.
-        .balign 16
-.globl _ffi_call_SYSV
- 
-_ffi_call_SYSV:
-        pushl %ebp
-        movl  %esp,%ebp
- 
-        # Make room for all of the new args.
-        movl  16(%ebp),%ecx                                                     
-        subl  %ecx,%esp
- 
-        movl  %esp,%eax
- 
-        # Place all of the ffi_prep_args in position
-        pushl 12(%ebp)
-        pushl %eax
-        call  *8(%ebp)
- 
-        # Return stack to previous state and call the function
-        addl  $8,%esp
- 
-        # FIXME: Align the stack to a 128-bit boundary to avoid
-        # potential performance hits.
-
-	call  *28(%ebp)
- 
-        # Remove the space we pushed for the args
-        movl  16(%ebp),%ecx
-        addl  %ecx,%esp
- 
-        # Load %ecx with the return type code
-        movl  20(%ebp),%ecx
- 
-        # If the return value pointer is NULL, assume no return value.
-        cmpl  $0,24(%ebp)
-        jne   retint
- 
-        # Even if there is no space for the return value, we are
-        # obliged to handle floating-point values.
-        cmpl  $2,%ecx  # Float_type
-        jne   noretval
-        fstp  %st(0)
- 
-        jmp   epilogue
- 
-retint:
-        cmpl  $1,%ecx    # Int_type
-        jne   retfloat
-        # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
-        movl  %eax,0(%ecx)
-        jmp   epilogue
- 
-retfloat:
-        cmpl  $2,%ecx   # Float_type
-        jne   retdouble   
-         # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
-        fstps (%ecx)
-        jmp   epilogue
- 
-retdouble:
-        cmpl  $3,%ecx     # Double_type
-        jne   retlongdouble
-        # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
-        fstpl (%ecx)
-        jmp   epilogue
- 
-retlongdouble:
-        cmpl  $4,%ecx     # Longdouble_type
-        jne   retint64
-        # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
-        fstpt (%ecx)
-        jmp   epilogue
- 
-retint64:
-        cmpl  $12,%ecx      # SINT64_type
-        jne   retstruct
-        # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
-        movl  %eax,0(%ecx)
-        movl  %edx,4(%ecx)
- 
-retstruct:
-        # Nothing to do!
- 
-noretval:
-epilogue:
-        movl %ebp,%esp
-        popl %ebp
-        ret
- 
-.ffi_call_SYSV_end:
-
-        # This assumes we are using gas.
-        .balign 16
-.globl _ffi_call_STDCALL
-
-_ffi_call_STDCALL:
-        pushl %ebp
-        movl  %esp,%ebp
-
-        # Make room for all of the new args.
-        movl  16(%ebp),%ecx 
-        subl  %ecx,%esp
-
-        movl  %esp,%eax
-
-        # Place all of the ffi_prep_args in position
-        pushl 12(%ebp)
-        pushl %eax
-        call  *8(%ebp)
-
-        # Return stack to previous state and call the function
-        addl  $8,%esp
-
-        # FIXME: Align the stack to a 128-bit boundary to avoid
-        # potential performance hits.
-
-        call  *28(%ebp)
-
-        # stdcall functions pop arguments off the stack themselves
-
-        # Load %ecx with the return type code
-        movl  20(%ebp),%ecx
-
-        # If the return value pointer is NULL, assume no return value.
-        cmpl  $0,24(%ebp)
-        jne   sc_retint
-
-        # Even if there is no space for the return value, we are
-        # obliged to handle floating-point values.
-        cmpl  $2,%ecx      # Float_type
-        jne   sc_noretval
-        fstp  %st(0)
-
-        jmp   sc_epilogue
-
-sc_retint:
-        cmpl  $1,%ecx       # Int_type
-        jne   sc_retfloat
-        # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
-        movl  %eax,0(%ecx)
-        jmp   sc_epilogue
-
-sc_retfloat:
-        cmpl  $2,%ecx       # Float_type
-        jne   sc_retdouble
-         # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
-        fstps (%ecx)
-        jmp   sc_epilogue
-
-sc_retdouble:
-        cmpl  $2,%ecx       # Double_type
-        jne   sc_retlongdouble
-        # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
-        fstpl (%ecx)
-        jmp   sc_epilogue
-
-sc_retlongdouble:
-        cmpl  $4,%ecx      # Longdouble_type 
-        jne   sc_retint64
-        # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
-        fstpt (%ecx)
-        jmp   sc_epilogue
-
-sc_retint64:
-        cmpl  $12,%ecx      # SINT64_Type
-        jne   sc_retstruct
-        # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
-        movl  %eax,0(%ecx)
-        movl  %edx,4(%ecx)
-
-sc_retstruct:
-        # Nothing to do!
-
-sc_noretval:
-sc_epilogue:
-        movl %ebp,%esp
-        popl %ebp
-        ret
-
-.ffi_call_STDCALL_end:
-
diff --git a/Modules/_ctypes/malloc_closure.c b/Modules/_ctypes/malloc_closure.c
index 29e9f4c..4cd5dd6 100644
--- a/Modules/_ctypes/malloc_closure.c
+++ b/Modules/_ctypes/malloc_closure.c
@@ -1,3 +1,7 @@
+/*****************************************************************
+  This file should be kept compatible with Python 2.3, see PEP 291.
+ *****************************************************************/
+
 #include <Python.h>
 #include <ffi.h>
 #ifdef MS_WIN32
diff --git a/Modules/_ctypes/stgdict.c b/Modules/_ctypes/stgdict.c
index c1c30f1..b4d8196 100644
--- a/Modules/_ctypes/stgdict.c
+++ b/Modules/_ctypes/stgdict.c
@@ -1,3 +1,7 @@
+/*****************************************************************
+  This file should be kept compatible with Python 2.3, see PEP 291.
+ *****************************************************************/
+
 #include "Python.h"
 #include <ffi.h>
 #ifdef MS_WIN32
@@ -128,42 +132,148 @@ PyType_stgdict(PyObject *obj)
 	if (!PyType_Check(obj))
 		return NULL;
 	type = (PyTypeObject *)obj;
-	if (!type->tp_dict || !StgDict_Check(type->tp_dict))
+	if (!type->tp_dict || !StgDict_CheckExact(type->tp_dict))
 		return NULL;
 	return (StgDictObject *)type->tp_dict;
 }
 
 /* May return NULL, but does not set an exception! */
+/*
+  This function should be as fast as possible, so we don't call PyType_stgdict
+  above but inline the code, and avoid the PyType_Check().
+*/
 StgDictObject *
 PyObject_stgdict(PyObject *self)
 {
-	return PyType_stgdict((PyObject *)self->ob_type);
+	PyTypeObject *type = self->ob_type;
+	if (!type->tp_dict || !StgDict_CheckExact(type->tp_dict))
+		return NULL;
+	return (StgDictObject *)type->tp_dict;
 }
 
-#if 0
-/* work in progress: anonymous structure fields */
-int
-GetFields(PyObject *desc, int *pindex, int *psize, int *poffset, int *palign, int pack);
+/* descr is the descriptor for a field marked as anonymous.  Get all the
+ _fields_ descriptors from descr->proto, create new descriptors with offset
+ and index adjusted, and stuff them into type.
+ */
+static int
+MakeFields(PyObject *type, CFieldObject *descr,
+	   Py_ssize_t index, Py_ssize_t offset)
+{
+	Py_ssize_t i;
+	PyObject *fields;
+	PyObject *fieldlist;
 
+	fields = PyObject_GetAttrString(descr->proto, "_fields_");
+	if (fields == NULL)
+		return -1;
+	fieldlist = PySequence_Fast(fields, "_fields_ must be a sequence");
+	Py_DECREF(fields);
+	if (fieldlist == NULL)
+		return -1;
+
+	for (i = 0; i < PySequence_Fast_GET_SIZE(fieldlist); ++i) {
+		PyObject *pair = PySequence_Fast_GET_ITEM(fieldlist, i); /* borrowed */
+		PyObject *fname, *ftype;
+		CFieldObject *fdescr;
+		CFieldObject *new_descr;
+		/* Convert to PyArg_UnpackTuple... */
+		if (!PyArg_ParseTuple(pair, "OO", &fname, &ftype)) {
+			Py_DECREF(fieldlist);
+			return -1;
+		}
+		fdescr = (CFieldObject *)PyObject_GetAttr(descr->proto, fname);
+		if (fdescr == NULL) {
+			Py_DECREF(fieldlist);
+			return -1;
+		}
+		if (fdescr->ob_type != &CField_Type) {
+			PyErr_SetString(PyExc_TypeError, "unexpected type");
+			Py_DECREF(fdescr);
+			Py_DECREF(fieldlist);
+			return -1;
+		}
+		if (fdescr->anonymous) {
+			int rc = MakeFields(type, fdescr,
+					    index + fdescr->index,
+					    offset + fdescr->offset);
+			Py_DECREF(fdescr);
+			if (rc == -1) {
+				Py_DECREF(fieldlist);
+				return -1;
+			}
+			continue;
+		}
+ 		new_descr = (CFieldObject *)PyObject_CallObject((PyObject *)&CField_Type, NULL);
+		assert(new_descr->ob_type == &CField_Type);
+		if (new_descr == NULL) {
+			Py_DECREF(fdescr);
+			Py_DECREF(fieldlist);
+			return -1;
+		}
+ 		new_descr->size = fdescr->size;
+ 		new_descr->offset = fdescr->offset + offset;
+ 		new_descr->index = fdescr->index + index;
+ 		new_descr->proto = fdescr->proto;
+ 		Py_XINCREF(new_descr->proto);
+ 		new_descr->getfunc = fdescr->getfunc;
+ 		new_descr->setfunc = fdescr->setfunc;
+
+  		Py_DECREF(fdescr);
+		
+		if (-1 == PyObject_SetAttr(type, fname, (PyObject *)new_descr)) {
+			Py_DECREF(fieldlist);
+			Py_DECREF(new_descr);
+			return -1;
+		}
+		Py_DECREF(new_descr);
+	}
+	Py_DECREF(fieldlist);
+	return 0;
+}
+
+/* Iterate over the names in the type's _anonymous_ attribute, if present,
+ */
+static int
+MakeAnonFields(PyObject *type)
 {
-	int i;
-	PyObject *tuples = PyObject_GetAttrString(desc, "_fields_");
-	if (tuples == NULL)
+	PyObject *anon;
+	PyObject *anon_names;
+	Py_ssize_t i;
+
+	anon = PyObject_GetAttrString(type, "_anonymous_");
+	if (anon == NULL) {
+		PyErr_Clear();
+		return 0;
+	}
+	anon_names = PySequence_Fast(anon, "_anonymous_ must be a sequence");
+	Py_DECREF(anon);
+	if (anon_names == NULL)
 		return -1;
-	if (!PyTuple_Check(tuples))
-		return -1; /* leak */
-	for (i = 0; i < PyTuple_GET_SIZE(tuples); ++i) {
-		char *fname;
-		PyObject *dummy;
-		CFieldObject *field;
-		PyObject *pair = PyTuple_GET_ITEM(tuples, i);
-		if (!PyArg_ParseTuple(pair, "sO", &fname, &dummy))
-			return -1; /* leak */
-		field = PyObject_GetAttrString(desc, fname);
-		Py_DECREF(field);
+
+	for (i = 0; i < PySequence_Fast_GET_SIZE(anon_names); ++i) {
+		PyObject *fname = PySequence_Fast_GET_ITEM(anon_names, i); /* borrowed */
+		CFieldObject *descr = (CFieldObject *)PyObject_GetAttr(type, fname);
+		if (descr == NULL) {
+			Py_DECREF(anon_names);
+			return -1;
+		}
+		assert(descr->ob_type == &CField_Type);
+		descr->anonymous = 1;
+
+		/* descr is in the field descriptor. */
+		if (-1 == MakeFields(type, (CFieldObject *)descr,
+				     ((CFieldObject *)descr)->index,
+				     ((CFieldObject *)descr)->offset)) {
+			Py_DECREF(descr);
+			Py_DECREF(anon_names);
+			return -1;
+		}
+		Py_DECREF(descr);
 	}
+
+	Py_DECREF(anon_names);
+	return 0;
 }
-#endif
 
 /*
   Retrive the (optional) _pack_ attribute from a type, the _fields_ attribute,
@@ -366,5 +476,5 @@ StructUnionType_update_stgdict(PyObject *type, PyObject *fields, int isStruct)
 	stgdict->size = size;
 	stgdict->align = total_align;
 	stgdict->length = len;	/* ADD ffi_ofs? */
-	return 0;
+	return MakeAnonFields(type);
 }
diff --git a/Modules/_cursesmodule.c b/Modules/_cursesmodule.c
index 71d7a69..ec55c8e 100644
--- a/Modules/_cursesmodule.c
+++ b/Modules/_cursesmodule.c
@@ -43,8 +43,8 @@ unsupported functions:
 	del_curterm delscreen dupwin inchnstr inchstr innstr keyok
 	mcprint mvaddchnstr mvaddchstr mvchgat mvcur mvinchnstr
 	mvinchstr mvinnstr mmvwaddchnstr mvwaddchstr mvwchgat
-	mvwgetnstr mvwinchnstr mvwinchstr mvwinnstr newterm
-	resizeterm restartterm ripoffline scr_dump
+	mvwinchnstr mvwinchstr mvwinnstr newterm
+	restartterm ripoffline scr_dump
 	scr_init scr_restore scr_set scrl set_curterm set_term setterm
 	tgetent tgetflag tgetnum tgetstr tgoto timeout tputs
 	vidattr vidputs waddchnstr waddchstr wchgat
@@ -819,14 +819,17 @@ PyCursesWindow_GetStr(PyCursesWindowObject *self, PyObject *args)
     if (!PyArg_ParseTuple(args,"ii;y,x",&y,&x))
       return NULL;
     Py_BEGIN_ALLOW_THREADS
+#ifdef STRICT_SYSV_CURSES
+    rtn2 = wmove(self->win,y,x)==ERR ? ERR : wgetnstr(self->win, rtn, 1023);
+#else
     rtn2 = mvwgetnstr(self->win,y,x,rtn, 1023);
+#endif
     Py_END_ALLOW_THREADS
     break;
   case 3:
     if (!PyArg_ParseTuple(args,"iii;y,x,n", &y, &x, &n))
       return NULL;
 #ifdef STRICT_SYSV_CURSES
- /* Untested */
     Py_BEGIN_ALLOW_THREADS
     rtn2 = wmove(self->win,y,x)==ERR ? ERR :
       wgetnstr(self->win, rtn, MIN(n, 1023));
@@ -838,7 +841,7 @@ PyCursesWindow_GetStr(PyCursesWindowObject *self, PyObject *args)
 #endif
     break;
   default:
-    PyErr_SetString(PyExc_TypeError, "getstr requires 0 to 2 arguments");
+    PyErr_SetString(PyExc_TypeError, "getstr requires 0 to 3 arguments");
     return NULL;
   }
   if (rtn2 == ERR)
@@ -1950,6 +1953,29 @@ PyCurses_IntrFlush(PyObject *self, PyObject *args)
   return PyCursesCheckERR(intrflush(NULL,ch), "intrflush");
 }
 
+#ifdef HAVE_CURSES_IS_TERM_RESIZED
+static PyObject *
+PyCurses_Is_Term_Resized(PyObject *self, PyObject *args)
+{
+  int lines;
+  int columns;
+  int result;
+
+  PyCursesInitialised
+
+  if (!PyArg_ParseTuple(args,"ii:is_term_resized", &lines, &columns))
+    return NULL;
+  result = is_term_resized(lines, columns);
+  if (result == TRUE) {
+    Py_INCREF(Py_True);
+    return Py_True;
+  } else {
+    Py_INCREF(Py_False);
+    return Py_False;
+  }
+}
+#endif /* HAVE_CURSES_IS_TERM_RESIZED */
+
 #if !defined(__NetBSD__)
 static PyObject *
 PyCurses_KeyName(PyObject *self, PyObject *args)
@@ -2170,6 +2196,39 @@ PyCurses_QiFlush(PyObject *self, PyObject *args)
   }
 }
 
+#ifdef HAVE_CURSES_RESIZETERM
+static PyObject *
+PyCurses_ResizeTerm(PyObject *self, PyObject *args)
+{
+  int lines;
+  int columns;
+
+  PyCursesInitialised
+
+  if (!PyArg_ParseTuple(args,"ii:resizeterm", &lines, &columns))
+    return NULL;
+
+  return PyCursesCheckERR(resizeterm(lines, columns), "resizeterm");
+}
+
+#endif
+
+#ifdef HAVE_CURSES_RESIZE_TERM
+static PyObject *
+PyCurses_Resize_Term(PyObject *self, PyObject *args)
+{
+  int lines;
+  int columns;
+
+  PyCursesInitialised
+
+  if (!PyArg_ParseTuple(args,"ii:resize_term", &lines, &columns))
+    return NULL;
+
+  return PyCursesCheckERR(resize_term(lines, columns), "resize_term");
+}
+#endif /* HAVE_CURSES_RESIZE_TERM */
+
 static PyObject *
 PyCurses_setsyx(PyObject *self, PyObject *args)
 {
@@ -2414,6 +2473,9 @@ static PyMethodDef PyCurses_methods[] = {
   {"initscr",             (PyCFunction)PyCurses_InitScr, METH_NOARGS},
   {"intrflush",           (PyCFunction)PyCurses_IntrFlush, METH_VARARGS},
   {"isendwin",            (PyCFunction)PyCurses_isendwin, METH_NOARGS},
+#ifdef HAVE_CURSES_IS_TERM_RESIZED
+  {"is_term_resized",     (PyCFunction)PyCurses_Is_Term_Resized, METH_VARARGS},
+#endif
 #if !defined(__NetBSD__)
   {"keyname",             (PyCFunction)PyCurses_KeyName, METH_VARARGS},
 #endif
@@ -2441,6 +2503,12 @@ static PyMethodDef PyCurses_methods[] = {
   {"reset_prog_mode",     (PyCFunction)PyCurses_reset_prog_mode, METH_NOARGS},
   {"reset_shell_mode",    (PyCFunction)PyCurses_reset_shell_mode, METH_NOARGS},
   {"resetty",             (PyCFunction)PyCurses_resetty, METH_NOARGS},
+#ifdef HAVE_CURSES_RESIZETERM
+  {"resizeterm",          (PyCFunction)PyCurses_ResizeTerm, METH_VARARGS},
+#endif
+#ifdef HAVE_CURSES_RESIZE_TERM
+  {"resize_term",         (PyCFunction)PyCurses_Resize_Term, METH_VARARGS},
+#endif
   {"savetty",             (PyCFunction)PyCurses_savetty, METH_NOARGS},
   {"setsyx",              (PyCFunction)PyCurses_setsyx, METH_VARARGS},
   {"setupterm",           (PyCFunction)PyCurses_setupterm,
diff --git a/Modules/_elementtree.c b/Modules/_elementtree.c
index dda5042..fe30f30 100644
--- a/Modules/_elementtree.c
+++ b/Modules/_elementtree.c
@@ -717,7 +717,8 @@ element_deepcopy(ElementObject* self, PyObject* args)
 LOCAL(int)
 checkpath(PyObject* tag)
 {
-    int i, check = 1;
+    Py_ssize_t i;
+    int check = 1;
 
     /* check if a tag contains an xpath character */
 
@@ -1180,7 +1181,7 @@ static int
 element_setslice(PyObject* self_, Py_ssize_t start, Py_ssize_t end, PyObject* item)
 {
     ElementObject* self = (ElementObject*) self_;
-    int i, new, old;
+    Py_ssize_t i, new, old;
     PyObject* recycle = NULL;
 
     if (!self->extra)
@@ -1426,7 +1427,7 @@ typedef struct {
     PyObject* data; /* data collector (string or list), or NULL */
 
     PyObject* stack; /* element stack */
-    int index; /* current stack size (0=empty) */
+    Py_ssize_t index; /* current stack size (0=empty) */
 
     /* element tracing */
     PyObject* events; /* list of events, or NULL if not collecting */
@@ -1606,7 +1607,7 @@ treebuilder_handle_data(TreeBuilderObject* self, PyObject* data)
             PyString_CheckExact(data) && PyString_GET_SIZE(data) == 1) {
             /* expat often generates single character data sections; handle
                the most common case by resizing the existing string... */
-            int size = PyString_GET_SIZE(self->data);
+            Py_ssize_t size = PyString_GET_SIZE(self->data);
             if (_PyString_Resize(&self->data, size + 1) < 0)
                 return NULL;
             PyString_AS_STRING(self->data)[size] = PyString_AS_STRING(data)[0];
@@ -1988,7 +1989,7 @@ expat_default_handler(XMLParserObject* self, const XML_Char* data_in,
         Py_XDECREF(res);
     } else {
         PyErr_Format(
-            PyExc_SyntaxError, "undefined entity &%s;: line %d, column %d",
+            PyExc_SyntaxError, "undefined entity &%s;: line %ld, column %ld",
             PyString_AS_STRING(key),
             EXPAT(GetErrorLineNumber)(self->parser),
             EXPAT(GetErrorColumnNumber)(self->parser)
@@ -2349,7 +2350,7 @@ expat_parse(XMLParserObject* self, char* data, int data_len, int final)
 
     if (!ok) {
         PyErr_Format(
-            PyExc_SyntaxError, "%s: line %d, column %d",
+            PyExc_SyntaxError, "%s: line %ld, column %ld",
             EXPAT(ErrorString)(EXPAT(GetErrorCode)(self->parser)),
             EXPAT(GetErrorLineNumber)(self->parser),
             EXPAT(GetErrorColumnNumber)(self->parser)
@@ -2456,7 +2457,7 @@ xmlparser_setevents(XMLParserObject* self, PyObject* args)
 {
     /* activate element event reporting */
 
-    int i;
+    Py_ssize_t i;
     TreeBuilderObject* target;
 
     PyObject* events; /* event collector */
diff --git a/Modules/_hotshot.c b/Modules/_hotshot.c
index 5a81bfb..6d9776f 100644
--- a/Modules/_hotshot.c
+++ b/Modules/_hotshot.c
@@ -14,7 +14,11 @@
  */
 #ifdef MS_WINDOWS
 #include <windows.h>
+
+#ifdef HAVE_DIRECT_H
 #include <direct.h>    /* for getcwd() */
+#endif
+
 typedef __int64 hs_time;
 #define GETTIMEOFDAY(P_HS_TIME) \
 	{ LARGE_INTEGER _temp; \
diff --git a/Modules/_localemodule.c b/Modules/_localemodule.c
index c016cd7..abfca4e 100644
--- a/Modules/_localemodule.c
+++ b/Modules/_localemodule.c
@@ -16,7 +16,7 @@ This software comes with no warranty. Use at your own risk.
 #include <string.h>
 #include <ctype.h>
 
-#ifndef DONT_HAVE_ERRNO_H
+#ifdef HAVE_ERRNO_H
 #include <errno.h>
 #endif
 
diff --git a/Modules/_sqlite/connection.c b/Modules/_sqlite/connection.c
index 64e43eb..703af15 100644
--- a/Modules/_sqlite/connection.c
+++ b/Modules/_sqlite/connection.c
@@ -34,6 +34,19 @@
 
 static int connection_set_isolation_level(Connection* self, PyObject* isolation_level);
 
+
+void _sqlite3_result_error(sqlite3_context* ctx, const char* errmsg, int len)
+{
+    /* in older SQLite versions, calling sqlite3_result_error in callbacks
+     * triggers a bug in SQLite that leads either to irritating results or
+     * segfaults, depending on the SQLite version */
+#if SQLITE_VERSION_NUMBER >= 3003003
+    sqlite3_result_error(ctx, errmsg, len);
+#else
+    PyErr_SetString(OperationalError, errmsg);
+#endif
+}
+
 int connection_init(Connection* self, PyObject* args, PyObject* kwargs)
 {
     static char *kwlist[] = {"database", "timeout", "detect_types", "isolation_level", "check_same_thread", "factory", "cached_statements", NULL, NULL};
@@ -405,8 +418,6 @@ void _set_result(sqlite3_context* context, PyObject* py_val)
     PyObject* stringval;
 
     if ((!py_val) || PyErr_Occurred()) {
-        /* Errors in callbacks are ignored, and we return NULL */
-        PyErr_Clear();
         sqlite3_result_null(context);
     } else if (py_val == Py_None) {
         sqlite3_result_null(context);
@@ -519,8 +530,17 @@ void _func_callback(sqlite3_context* context, int argc, sqlite3_value** argv)
         Py_DECREF(args);
     }
 
-    _set_result(context, py_retval);
-    Py_XDECREF(py_retval);
+    if (py_retval) {
+        _set_result(context, py_retval);
+        Py_DECREF(py_retval);
+    } else {
+        if (_enable_callback_tracebacks) {
+            PyErr_Print();
+        } else {
+            PyErr_Clear();
+        }
+        _sqlite3_result_error(context, "user-defined function raised exception", -1);
+    }
 
     PyGILState_Release(threadstate);
 }
@@ -545,8 +565,13 @@ static void _step_callback(sqlite3_context *context, int argc, sqlite3_value** p
         *aggregate_instance = PyObject_CallFunction(aggregate_class, "");
 
         if (PyErr_Occurred()) {
-            PyErr_Clear();
             *aggregate_instance = 0;
+            if (_enable_callback_tracebacks) {
+                PyErr_Print();
+            } else {
+                PyErr_Clear();
+            }
+            _sqlite3_result_error(context, "user-defined aggregate's '__init__' method raised error", -1);
             goto error;
         }
     }
@@ -565,7 +590,12 @@ static void _step_callback(sqlite3_context *context, int argc, sqlite3_value** p
     Py_DECREF(args);
 
     if (!function_result) {
-        PyErr_Clear();
+        if (_enable_callback_tracebacks) {
+            PyErr_Print();
+        } else {
+            PyErr_Clear();
+        }
+        _sqlite3_result_error(context, "user-defined aggregate's 'step' method raised error", -1);
     }
 
 error:
@@ -597,13 +627,16 @@ void _final_callback(sqlite3_context* context)
 
     function_result = PyObject_CallMethod(*aggregate_instance, "finalize", "");
     if (!function_result) {
-        PyErr_Clear();
-        Py_INCREF(Py_None);
-        function_result = Py_None;
+        if (_enable_callback_tracebacks) {
+            PyErr_Print();
+        } else {
+            PyErr_Clear();
+        }
+        _sqlite3_result_error(context, "user-defined aggregate's 'finalize' method raised error", -1);
+    } else {
+        _set_result(context, function_result);
     }
 
-    _set_result(context, function_result);
-
 error:
     Py_XDECREF(*aggregate_instance);
     Py_XDECREF(function_result);
@@ -631,7 +664,7 @@ void _drop_unused_statement_references(Connection* self)
 
     for (i = 0; i < PyList_Size(self->statements); i++) {
         weakref = PyList_GetItem(self->statements, i);
-        if (weakref != Py_None) {
+        if (PyWeakref_GetObject(weakref) != Py_None) {
             if (PyList_Append(new_list, weakref) != 0) {
                 Py_DECREF(new_list);
                 return;
@@ -699,6 +732,61 @@ PyObject* connection_create_aggregate(Connection* self, PyObject* args, PyObject
     }
 }
 
+int _authorizer_callback(void* user_arg, int action, const char* arg1, const char* arg2 , const char* dbname, const char* access_attempt_source)
+{
+    PyObject *ret;
+    int rc;
+    PyGILState_STATE gilstate;
+
+    gilstate = PyGILState_Ensure();
+    ret = PyObject_CallFunction((PyObject*)user_arg, "issss", action, arg1, arg2, dbname, access_attempt_source);
+
+    if (!ret) {
+        if (_enable_callback_tracebacks) {
+            PyErr_Print();
+        } else {
+            PyErr_Clear();
+        }
+
+        rc = SQLITE_DENY;
+    } else {
+        if (PyInt_Check(ret)) {
+            rc = (int)PyInt_AsLong(ret);
+        } else {
+            rc = SQLITE_DENY;
+        }
+        Py_DECREF(ret);
+    }
+
+    PyGILState_Release(gilstate);
+    return rc;
+}
+
+PyObject* connection_set_authorizer(Connection* self, PyObject* args, PyObject* kwargs)
+{
+    PyObject* authorizer_cb;
+
+    static char *kwlist[] = { "authorizer_callback", NULL };
+    int rc;
+
+    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "O:set_authorizer",
+                                      kwlist, &authorizer_cb)) {
+        return NULL;
+    }
+
+    rc = sqlite3_set_authorizer(self->db, _authorizer_callback, (void*)authorizer_cb);
+
+    if (rc != SQLITE_OK) {
+        PyErr_SetString(OperationalError, "Error setting authorizer callback");
+        return NULL;
+    } else {
+        PyDict_SetItem(self->function_pinboard, authorizer_cb, Py_None);
+
+        Py_INCREF(Py_None);
+        return Py_None;
+    }
+}
+
 int check_thread(Connection* self)
 {
     if (self->check_same_thread) {
@@ -975,6 +1063,24 @@ finally:
 }
 
 static PyObject *
+connection_interrupt(Connection* self, PyObject* args)
+{
+    PyObject* retval = NULL;
+
+    if (!check_connection(self)) {
+        goto finally;
+    }
+
+    sqlite3_interrupt(self->db);
+
+    Py_INCREF(Py_None);
+    retval = Py_None;
+
+finally:
+    return retval;
+}
+
+static PyObject *
 connection_create_collation(Connection* self, PyObject* args)
 {
     PyObject* callable;
@@ -1067,6 +1173,8 @@ static PyMethodDef connection_methods[] = {
         PyDoc_STR("Creates a new function. Non-standard.")},
     {"create_aggregate", (PyCFunction)connection_create_aggregate, METH_VARARGS|METH_KEYWORDS,
         PyDoc_STR("Creates a new aggregate. Non-standard.")},
+    {"set_authorizer", (PyCFunction)connection_set_authorizer, METH_VARARGS|METH_KEYWORDS,
+        PyDoc_STR("Sets authorizer callback. Non-standard.")},
     {"execute", (PyCFunction)connection_execute, METH_VARARGS,
         PyDoc_STR("Executes a SQL statement. Non-standard.")},
     {"executemany", (PyCFunction)connection_executemany, METH_VARARGS,
@@ -1075,6 +1183,8 @@ static PyMethodDef connection_methods[] = {
         PyDoc_STR("Executes a multiple SQL statements at once. Non-standard.")},
     {"create_collation", (PyCFunction)connection_create_collation, METH_VARARGS,
         PyDoc_STR("Creates a collation function. Non-standard.")},
+    {"interrupt", (PyCFunction)connection_interrupt, METH_NOARGS,
+        PyDoc_STR("Abort any pending database operation. Non-standard.")},
     {NULL, NULL}
 };
 
diff --git a/Modules/_sqlite/cursor.c b/Modules/_sqlite/cursor.c
index 95a4931..a2d3cf2 100644
--- a/Modules/_sqlite/cursor.c
+++ b/Modules/_sqlite/cursor.c
@@ -137,6 +137,22 @@ void cursor_dealloc(Cursor* self)
     self->ob_type->tp_free((PyObject*)self);
 }
 
+PyObject* _get_converter(PyObject* key)
+{
+    PyObject* upcase_key;
+    PyObject* retval;
+
+    upcase_key = PyObject_CallMethod(key, "upper", "");
+    if (!upcase_key) {
+        return NULL;
+    }
+
+    retval = PyDict_GetItem(converters, upcase_key);
+    Py_DECREF(upcase_key);
+
+    return retval;
+}
+
 int build_row_cast_map(Cursor* self)
 {
     int i;
@@ -174,7 +190,7 @@ int build_row_cast_map(Cursor* self)
                             break;
                         }
 
-                        converter = PyDict_GetItem(converters, key);
+                        converter = _get_converter(key);
                         Py_DECREF(key);
                         break;
                     }
@@ -195,7 +211,7 @@ int build_row_cast_map(Cursor* self)
                     }
                 }
 
-                converter = PyDict_GetItem(converters, py_decltype);
+                converter = _get_converter(py_decltype);
                 Py_DECREF(py_decltype);
             }
         }
@@ -228,7 +244,10 @@ PyObject* _build_column_name(const char* colname)
     }
 
     for (pos = colname;; pos++) {
-        if (*pos == 0 || *pos == ' ') {
+        if (*pos == 0 || *pos == '[') {
+            if ((*pos == '[') && (pos > colname) && (*(pos-1) == ' ')) {
+                pos--;
+            }
             return PyString_FromStringAndSize(colname, pos - colname);
         }
     }
@@ -302,23 +321,21 @@ PyObject* _fetch_one_row(Cursor* self)
         }
 
         if (converter != Py_None) {
-            val_str = (const char*)sqlite3_column_text(self->statement->st, i);
+            nbytes = sqlite3_column_bytes(self->statement->st, i);
+            val_str = (const char*)sqlite3_column_blob(self->statement->st, i);
             if (!val_str) {
                 Py_INCREF(Py_None);
                 converted = Py_None;
             } else {
-                item = PyString_FromString(val_str);
+                item = PyString_FromStringAndSize(val_str, nbytes);
                 if (!item) {
                     return NULL;
                 }
                 converted = PyObject_CallFunction(converter, "O", item);
+                Py_DECREF(item);
                 if (!converted) {
-                    /* TODO: have a way to log these errors */
-                    Py_INCREF(Py_None);
-                    converted = Py_None;
-                    PyErr_Clear();
+                    break;
                 }
-                Py_DECREF(item);
             }
         } else {
             Py_BEGIN_ALLOW_THREADS
@@ -346,10 +363,10 @@ PyObject* _fetch_one_row(Cursor* self)
 
                     if (!converted) {
                         colname = sqlite3_column_name(self->statement->st, i);
-                        if (colname) {
+                        if (!colname) {
                             colname = "<unknown column name>";
                         }
-                        PyOS_snprintf(buf, sizeof(buf) - 1, "Could not decode to UTF-8 column %s with text %s",
+                        PyOS_snprintf(buf, sizeof(buf) - 1, "Could not decode to UTF-8 column '%s' with text '%s'",
                                      colname , val_str);
                         PyErr_SetString(OperationalError, buf);
                     }
@@ -373,7 +390,12 @@ PyObject* _fetch_one_row(Cursor* self)
             }
         }
 
-        PyTuple_SetItem(row, i, converted);
+        if (converted) {
+            PyTuple_SetItem(row, i, converted);
+        } else {
+            Py_INCREF(Py_None);
+            PyTuple_SetItem(row, i, Py_None);
+        }
     }
 
     if (PyErr_Occurred()) {
@@ -598,6 +620,14 @@ PyObject* _query_execute(Cursor* self, int multiple, PyObject* args)
                     goto error;
                 }
             } else {
+                if (PyErr_Occurred()) {
+                    /* there was an error that occurred in a user-defined callback */
+                    if (_enable_callback_tracebacks) {
+                        PyErr_Print();
+                    } else {
+                        PyErr_Clear();
+                    }
+                }
                 _seterror(self->connection->db);
                 goto error;
             }
diff --git a/Modules/_sqlite/module.c b/Modules/_sqlite/module.c
index 71d0aaa..606454c 100644
--- a/Modules/_sqlite/module.c
+++ b/Modules/_sqlite/module.c
@@ -1,25 +1,25 @@
-/* module.c - the module itself
- *
- * Copyright (C) 2004-2006 Gerhard H�ring <gh@ghaering.de>
- *
- * This file is part of pysqlite.
- *
- * This software is provided 'as-is', without any express or implied
- * warranty.  In no event will the authors be held liable for any damages
- * arising from the use of this software.
- *
- * Permission is granted to anyone to use this software for any purpose,
- * including commercial applications, and to alter it and redistribute it
- * freely, subject to the following restrictions:
- *
- * 1. The origin of this software must not be misrepresented; you must not
- *    claim that you wrote the original software. If you use this software
- *    in a product, an acknowledgment in the product documentation would be
- *    appreciated but is not required.
- * 2. Altered source versions must be plainly marked as such, and must not be
- *    misrepresented as being the original software.
- * 3. This notice may not be removed or altered from any source distribution.
- */
+    /* module.c - the module itself
+     *
+     * Copyright (C) 2004-2006 Gerhard H�ring <gh@ghaering.de>
+     *
+     * This file is part of pysqlite.
+     *
+     * This software is provided 'as-is', without any express or implied
+     * warranty.  In no event will the authors be held liable for any damages
+     * arising from the use of this software.
+     *
+     * Permission is granted to anyone to use this software for any purpose,
+     * including commercial applications, and to alter it and redistribute it
+     * freely, subject to the following restrictions:
+     *
+     * 1. The origin of this software must not be misrepresented; you must not
+     *    claim that you wrote the original software. If you use this software
+     *    in a product, an acknowledgment in the product documentation would be
+     *    appreciated but is not required.
+     * 2. Altered source versions must be plainly marked as such, and must not be
+     *    misrepresented as being the original software.
+     * 3. This notice may not be removed or altered from any source distribution.
+     */
 
 #include "connection.h"
 #include "statement.h"
@@ -40,6 +40,7 @@ PyObject* Error, *Warning, *InterfaceError, *DatabaseError, *InternalError,
     *NotSupportedError, *OptimizedUnicode;
 
 PyObject* converters;
+int _enable_callback_tracebacks;
 
 static PyObject* module_connect(PyObject* self, PyObject* args, PyObject*
         kwargs)
@@ -140,14 +141,42 @@ static PyObject* module_register_adapter(PyObject* self, PyObject* args, PyObjec
 
 static PyObject* module_register_converter(PyObject* self, PyObject* args, PyObject* kwargs)
 {
-    PyObject* name;
+    char* orig_name;
+    char* name = NULL;
+    char* c;
     PyObject* callable;
+    PyObject* retval = NULL;
 
-    if (!PyArg_ParseTuple(args, "OO", &name, &callable)) {
+    if (!PyArg_ParseTuple(args, "sO", &orig_name, &callable)) {
         return NULL;
     }
 
-    if (PyDict_SetItem(converters, name, callable) != 0) {
+    /* convert the name to lowercase */
+    name = PyMem_Malloc(strlen(orig_name) + 2);
+    if (!name) {
+        goto error;
+    }
+    strcpy(name, orig_name);
+    for (c = name; *c != (char)0; c++) {
+        *c = (*c) & 0xDF;
+    }
+
+    if (PyDict_SetItemString(converters, name, callable) != 0) {
+        goto error;
+    }
+
+    Py_INCREF(Py_None);
+    retval = Py_None;
+error:
+    if (name) {
+        PyMem_Free(name);
+    }
+    return retval;
+}
+
+static PyObject* enable_callback_tracebacks(PyObject* self, PyObject* args, PyObject* kwargs)
+{
+    if (!PyArg_ParseTuple(args, "i", &_enable_callback_tracebacks)) {
         return NULL;
     }
 
@@ -174,13 +203,64 @@ static PyMethodDef module_methods[] = {
     {"register_adapter", (PyCFunction)module_register_adapter, METH_VARARGS, PyDoc_STR("Registers an adapter with pysqlite's adapter registry. Non-standard.")},
     {"register_converter", (PyCFunction)module_register_converter, METH_VARARGS, PyDoc_STR("Registers a converter with pysqlite. Non-standard.")},
     {"adapt",  (PyCFunction)psyco_microprotocols_adapt, METH_VARARGS, psyco_microprotocols_adapt_doc},
+    {"enable_callback_tracebacks",  (PyCFunction)enable_callback_tracebacks, METH_VARARGS, PyDoc_STR("Enable or disable callback functions throwing errors to stderr.")},
     {NULL, NULL}
 };
 
+struct _IntConstantPair {
+    char* constant_name;
+    int constant_value;
+};
+
+typedef struct _IntConstantPair IntConstantPair;
+
+static IntConstantPair _int_constants[] = {
+    {"PARSE_DECLTYPES", PARSE_DECLTYPES},
+    {"PARSE_COLNAMES", PARSE_COLNAMES},
+
+    {"SQLITE_OK", SQLITE_OK},
+    {"SQLITE_DENY", SQLITE_DENY},
+    {"SQLITE_IGNORE", SQLITE_IGNORE},
+    {"SQLITE_CREATE_INDEX", SQLITE_CREATE_INDEX},
+    {"SQLITE_CREATE_TABLE", SQLITE_CREATE_TABLE},
+    {"SQLITE_CREATE_TEMP_INDEX", SQLITE_CREATE_TEMP_INDEX},
+    {"SQLITE_CREATE_TEMP_TABLE", SQLITE_CREATE_TEMP_TABLE},
+    {"SQLITE_CREATE_TEMP_TRIGGER", SQLITE_CREATE_TEMP_TRIGGER},
+    {"SQLITE_CREATE_TEMP_VIEW", SQLITE_CREATE_TEMP_VIEW},
+    {"SQLITE_CREATE_TRIGGER", SQLITE_CREATE_TRIGGER},
+    {"SQLITE_CREATE_VIEW", SQLITE_CREATE_VIEW},
+    {"SQLITE_DELETE", SQLITE_DELETE},
+    {"SQLITE_DROP_INDEX", SQLITE_DROP_INDEX},
+    {"SQLITE_DROP_TABLE", SQLITE_DROP_TABLE},
+    {"SQLITE_DROP_TEMP_INDEX", SQLITE_DROP_TEMP_INDEX},
+    {"SQLITE_DROP_TEMP_TABLE", SQLITE_DROP_TEMP_TABLE},
+    {"SQLITE_DROP_TEMP_TRIGGER", SQLITE_DROP_TEMP_TRIGGER},
+    {"SQLITE_DROP_TEMP_VIEW", SQLITE_DROP_TEMP_VIEW},
+    {"SQLITE_DROP_TRIGGER", SQLITE_DROP_TRIGGER},
+    {"SQLITE_DROP_VIEW", SQLITE_DROP_VIEW},
+    {"SQLITE_INSERT", SQLITE_INSERT},
+    {"SQLITE_PRAGMA", SQLITE_PRAGMA},
+    {"SQLITE_READ", SQLITE_READ},
+    {"SQLITE_SELECT", SQLITE_SELECT},
+    {"SQLITE_TRANSACTION", SQLITE_TRANSACTION},
+    {"SQLITE_UPDATE", SQLITE_UPDATE},
+    {"SQLITE_ATTACH", SQLITE_ATTACH},
+    {"SQLITE_DETACH", SQLITE_DETACH},
+#if SQLITE_VERSION_NUMBER >= 3002001
+    {"SQLITE_ALTER_TABLE", SQLITE_ALTER_TABLE},
+    {"SQLITE_REINDEX", SQLITE_REINDEX},
+#endif
+#if SQLITE_VERSION_NUMBER >= 3003000
+    {"SQLITE_ANALYZE", SQLITE_ANALYZE},
+#endif
+    {(char*)NULL, 0}
+};
+
 PyMODINIT_FUNC init_sqlite3(void)
 {
     PyObject *module, *dict;
     PyObject *tmp_obj;
+    int i;
 
     module = Py_InitModule("_sqlite3", module_methods);
 
@@ -276,17 +356,15 @@ PyMODINIT_FUNC init_sqlite3(void)
     OptimizedUnicode = (PyObject*)&PyCell_Type;
     PyDict_SetItemString(dict, "OptimizedUnicode", OptimizedUnicode);
 
-    if (!(tmp_obj = PyInt_FromLong(PARSE_DECLTYPES))) {
-        goto error;
+    /* Set integer constants */
+    for (i = 0; _int_constants[i].constant_name != 0; i++) {
+        tmp_obj = PyInt_FromLong(_int_constants[i].constant_value);
+        if (!tmp_obj) {
+            goto error;
+        }
+        PyDict_SetItemString(dict, _int_constants[i].constant_name, tmp_obj);
+        Py_DECREF(tmp_obj);
     }
-    PyDict_SetItemString(dict, "PARSE_DECLTYPES", tmp_obj);
-    Py_DECREF(tmp_obj);
-
-    if (!(tmp_obj = PyInt_FromLong(PARSE_COLNAMES))) {
-        goto error;
-    }
-    PyDict_SetItemString(dict, "PARSE_COLNAMES", tmp_obj);
-    Py_DECREF(tmp_obj);
 
     if (!(tmp_obj = PyString_FromString(PYSQLITE_VERSION))) {
         goto error;
@@ -306,6 +384,8 @@ PyMODINIT_FUNC init_sqlite3(void)
     /* initialize the default converters */
     converters_init(dict);
 
+    _enable_callback_tracebacks = 0;
+
     /* Original comment form _bsddb.c in the Python core. This is also still
      * needed nowadays for Python 2.3/2.4.
      * 
diff --git a/Modules/_sqlite/module.h b/Modules/_sqlite/module.h
index f3e2aa1..e514bd1 100644
--- a/Modules/_sqlite/module.h
+++ b/Modules/_sqlite/module.h
@@ -25,7 +25,7 @@
 #define PYSQLITE_MODULE_H
 #include "Python.h"
 
-#define PYSQLITE_VERSION "2.2.2"
+#define PYSQLITE_VERSION "2.3.2"
 
 extern PyObject* Error;
 extern PyObject* Warning;
@@ -50,6 +50,8 @@ extern PyObject* time_sleep;
  */
 extern PyObject* converters;
 
+extern int _enable_callback_tracebacks;
+
 #define PARSE_DECLTYPES 1
 #define PARSE_COLNAMES 2
 #endif
diff --git a/Modules/_sqlite/util.c b/Modules/_sqlite/util.c
index 33748a6..f5a7233 100644
--- a/Modules/_sqlite/util.c
+++ b/Modules/_sqlite/util.c
@@ -38,7 +38,7 @@ int _sqlite_step_with_busyhandler(sqlite3_stmt* statement, Connection* connectio
 
 /**
  * Checks the SQLite error code and sets the appropriate DB-API exception.
- * Returns the error code (0 means no error occured).
+ * Returns the error code (0 means no error occurred).
  */
 int _seterror(sqlite3* db)
 {
diff --git a/Modules/_sqlite/util.h b/Modules/_sqlite/util.h
index e99a4dd..7ce3d40 100644
--- a/Modules/_sqlite/util.h
+++ b/Modules/_sqlite/util.h
@@ -32,7 +32,7 @@ int _sqlite_step_with_busyhandler(sqlite3_stmt* statement, Connection* connectio
 
 /**
  * Checks the SQLite error code and sets the appropriate DB-API exception.
- * Returns the error code (0 means no error occured).
+ * Returns the error code (0 means no error occurred).
  */
 int _seterror(sqlite3* db);
 #endif
diff --git a/Modules/_sre.c b/Modules/_sre.c
index d4e6051..68d511e 100644
--- a/Modules/_sre.c
+++ b/Modules/_sre.c
@@ -39,6 +39,8 @@
 static char copyright[] =
     " SRE 2.2.2 Copyright (c) 1997-2002 by Secret Labs AB ";
 
+#define PY_SSIZE_T_CLEAN
+
 #include "Python.h"
 #include "structmember.h" /* offsetof */
 
@@ -261,9 +263,9 @@ data_stack_dealloc(SRE_STATE* state)
 }
 
 static int
-data_stack_grow(SRE_STATE* state, int size)
+data_stack_grow(SRE_STATE* state, Py_ssize_t size)
 {
-    int minsize, cursize;
+    Py_ssize_t minsize, cursize;
     minsize = state->data_stack_base+size;
     cursize = state->data_stack_size;
     if (cursize < minsize) {
@@ -335,7 +337,7 @@ SRE_AT(SRE_STATE* state, SRE_CHAR* ptr, SRE_CODE at)
 {
     /* check if pointer is at given position */
 
-    int thisp, thatp;
+    Py_ssize_t thisp, thatp;
 
     switch (at) {
 
@@ -476,7 +478,7 @@ SRE_CHARSET(SRE_CODE* set, SRE_CODE ch)
         case SRE_OP_BIGCHARSET:
             /* <BIGCHARSET> <blockcount> <256 blockindices> <blocks> */
         {
-            int count, block;
+            Py_ssize_t count, block;
             count = *(set++);
 
             if (sizeof(SRE_CODE) == 2) {
@@ -510,15 +512,15 @@ SRE_CHARSET(SRE_CODE* set, SRE_CODE ch)
     }
 }
 
-LOCAL(int) SRE_MATCH(SRE_STATE* state, SRE_CODE* pattern);
+LOCAL(Py_ssize_t) SRE_MATCH(SRE_STATE* state, SRE_CODE* pattern);
 
-LOCAL(int)
-SRE_COUNT(SRE_STATE* state, SRE_CODE* pattern, int maxcount)
+LOCAL(Py_ssize_t)
+SRE_COUNT(SRE_STATE* state, SRE_CODE* pattern, Py_ssize_t maxcount)
 {
     SRE_CODE chr;
     SRE_CHAR* ptr = (SRE_CHAR *)state->ptr;
     SRE_CHAR* end = (SRE_CHAR *)state->end;
-    int i;
+    Py_ssize_t i;
 
     /* adjust end */
     if (maxcount < end - ptr && maxcount != 65535)
@@ -608,7 +610,7 @@ SRE_INFO(SRE_STATE* state, SRE_CODE* pattern)
 
     SRE_CHAR* end = state->end;
     SRE_CHAR* ptr = state->ptr;
-    int i;
+    Py_ssize_t i;
 
     /* check minimal length */
     if (pattern[3] && (end - ptr) < pattern[3])
@@ -785,13 +787,13 @@ do { \
     while (0) /* gcc doesn't like labels at end of scopes */ \
 
 typedef struct {
-    int last_ctx_pos;
-    int jump;
+    Py_ssize_t last_ctx_pos;
+    Py_ssize_t jump;
     SRE_CHAR* ptr;
     SRE_CODE* pattern;
-    int count;
-    int lastmark;
-    int lastindex;
+    Py_ssize_t count;
+    Py_ssize_t lastmark;
+    Py_ssize_t lastindex;
     union {
         SRE_CODE chr;
         SRE_REPEAT* rep;
@@ -800,13 +802,13 @@ typedef struct {
 
 /* check if string matches the given pattern.  returns <0 for
    error, 0 for failure, and 1 for success */
-LOCAL(int)
+LOCAL(Py_ssize_t)
 SRE_MATCH(SRE_STATE* state, SRE_CODE* pattern)
 {
     SRE_CHAR* end = (SRE_CHAR *)state->end;
-    int alloc_pos, ctx_pos = -1;
-    int i, ret = 0;
-    int jump;
+    Py_ssize_t alloc_pos, ctx_pos = -1;
+    Py_ssize_t i, ret = 0;
+    Py_ssize_t jump;
 
     SRE_MATCH_CONTEXT* ctx;
     SRE_MATCH_CONTEXT* nextctx;
@@ -851,7 +853,7 @@ entrance:
                    state->mark array.  If it is increased by more than 1,
                    the intervening marks must be set to NULL to signal
                    that these marks have not been encountered. */
-                int j = state->lastmark + 1;
+                Py_ssize_t j = state->lastmark + 1;
                 while (j < i)
                     state->mark[j++] = NULL;
                 state->lastmark = i;
@@ -1037,7 +1039,7 @@ entrance:
                string.  check if the rest of the pattern matches,
                and backtrack if not. */
 
-            if (ctx->count < (int) ctx->pattern[1])
+            if (ctx->count < (Py_ssize_t) ctx->pattern[1])
                 RETURN_FAILURE;
 
             if (ctx->pattern[ctx->pattern[0]] == SRE_OP_SUCCESS) {
@@ -1053,12 +1055,12 @@ entrance:
                    the rest of the pattern cannot possibly match */
                 ctx->u.chr = ctx->pattern[ctx->pattern[0]+1];
                 for (;;) {
-                    while (ctx->count >= (int) ctx->pattern[1] &&
+                    while (ctx->count >= (Py_ssize_t) ctx->pattern[1] &&
                            (ctx->ptr >= end || *ctx->ptr != ctx->u.chr)) {
                         ctx->ptr--;
                         ctx->count--;
                     }
-                    if (ctx->count < (int) ctx->pattern[1])
+                    if (ctx->count < (Py_ssize_t) ctx->pattern[1])
                         break;
                     state->ptr = ctx->ptr;
                     DO_JUMP(JUMP_REPEAT_ONE_1, jump_repeat_one_1,
@@ -1076,7 +1078,7 @@ entrance:
 
             } else {
                 /* general case */
-                while (ctx->count >= (int) ctx->pattern[1]) {
+                while (ctx->count >= (Py_ssize_t) ctx->pattern[1]) {
                     state->ptr = ctx->ptr;
                     DO_JUMP(JUMP_REPEAT_ONE_2, jump_repeat_one_2,
                             ctx->pattern+ctx->pattern[0]);
@@ -1116,7 +1118,7 @@ entrance:
                 ret = SRE_COUNT(state, ctx->pattern+3, ctx->pattern[1]);
                 RETURN_ON_ERROR(ret);
                 DATA_LOOKUP_AT(SRE_MATCH_CONTEXT, ctx, ctx_pos);
-                if (ret < (int) ctx->pattern[1])
+                if (ret < (Py_ssize_t) ctx->pattern[1])
                     /* didn't match minimum number of times */
                     RETURN_FAILURE;
                 /* advance past minimum matches of repeat */
@@ -1132,8 +1134,8 @@ entrance:
             } else {
                 /* general case */
                 LASTMARK_SAVE();
-                while ((int)ctx->pattern[2] == 65535
-                       || ctx->count <= (int)ctx->pattern[2]) {
+                while ((Py_ssize_t)ctx->pattern[2] == 65535
+                       || ctx->count <= (Py_ssize_t)ctx->pattern[2]) {
                     state->ptr = ctx->ptr;
                     DO_JUMP(JUMP_MIN_REPEAT_ONE,jump_min_repeat_one,
                             ctx->pattern+ctx->pattern[0]);
@@ -1312,7 +1314,7 @@ entrance:
                    ctx->ptr, ctx->pattern[0]));
             i = ctx->pattern[0];
             {
-                int groupref = i+i;
+                Py_ssize_t groupref = i+i;
                 if (groupref >= state->lastmark) {
                     RETURN_FAILURE;
                 } else {
@@ -1336,7 +1338,7 @@ entrance:
                    ctx->ptr, ctx->pattern[0]));
             i = ctx->pattern[0];
             {
-                int groupref = i+i;
+                Py_ssize_t groupref = i+i;
                 if (groupref >= state->lastmark) {
                     RETURN_FAILURE;
                 } else {
@@ -1361,7 +1363,7 @@ entrance:
             /* <GROUPREF_EXISTS> <group> <skip> codeyes <JUMP> codeno ... */
             i = ctx->pattern[0];
             {
-                int groupref = i+i;
+                Py_ssize_t groupref = i+i;
                 if (groupref >= state->lastmark) {
                     ctx->pattern += ctx->pattern[1];
                     break;
@@ -1474,14 +1476,14 @@ exit:
     return ret; /* should never get here */
 }
 
-LOCAL(int)
+LOCAL(Py_ssize_t)
 SRE_SEARCH(SRE_STATE* state, SRE_CODE* pattern)
 {
     SRE_CHAR* ptr = (SRE_CHAR *)state->start;
     SRE_CHAR* end = (SRE_CHAR *)state->end;
-    int status = 0;
-    int prefix_len = 0;
-    int prefix_skip = 0;
+    Py_ssize_t status = 0;
+    Py_ssize_t prefix_len = 0;
+    Py_ssize_t prefix_skip = 0;
     SRE_CODE* prefix = NULL;
     SRE_CODE* charset = NULL;
     SRE_CODE* overlap = NULL;
@@ -1523,7 +1525,7 @@ SRE_SEARCH(SRE_STATE* state, SRE_CODE* pattern)
     if (prefix_len > 1) {
         /* pattern starts with a known prefix.  use the overlap
            table to skip forward as fast as we possibly can */
-        int i = 0;
+        Py_ssize_t i = 0;
         end = (SRE_CHAR *)state->end;
         while (ptr < end) {
             for (;;) {
@@ -1604,7 +1606,7 @@ SRE_SEARCH(SRE_STATE* state, SRE_CODE* pattern)
 }
 
 LOCAL(int)
-SRE_LITERAL_TEMPLATE(SRE_CHAR* ptr, int len)
+SRE_LITERAL_TEMPLATE(SRE_CHAR* ptr, Py_ssize_t len)
 {
     /* check if given string is a literal template (i.e. no escapes) */
     while (len-- > 0)
@@ -1625,7 +1627,7 @@ static PyObject*pattern_scanner(PatternObject*, PyObject*);
 static PyObject *
 sre_codesize(PyObject* self, PyObject *unused)
 {
-    return Py_BuildValue("i", sizeof(SRE_CODE));
+    return Py_BuildValue("l", sizeof(SRE_CODE));
 }
 
 static PyObject *
@@ -1660,14 +1662,15 @@ state_reset(SRE_STATE* state)
 }
 
 static void*
-getstring(PyObject* string, int* p_length, int* p_charsize)
+getstring(PyObject* string, Py_ssize_t* p_length, int* p_charsize)
 {
     /* given a python object, return a data pointer, a length (in
        characters), and a character size.  return NULL if the object
        is not a string (or not compatible) */
 
     PyBufferProcs *buffer;
-    int size, bytes, charsize;
+    Py_ssize_t size, bytes;
+    int charsize;
     void* ptr;
 
 #if defined(HAVE_UNICODE)
@@ -1706,7 +1709,7 @@ getstring(PyObject* string, int* p_length, int* p_charsize)
     if (PyString_Check(string) || bytes == size)
         charsize = 1;
 #if defined(HAVE_UNICODE)
-    else if (bytes == (int) (size * sizeof(Py_UNICODE)))
+    else if (bytes == (Py_ssize_t) (size * sizeof(Py_UNICODE)))
         charsize = sizeof(Py_UNICODE);
 #endif
     else {
@@ -1726,11 +1729,11 @@ getstring(PyObject* string, int* p_length, int* p_charsize)
 
 LOCAL(PyObject*)
 state_init(SRE_STATE* state, PatternObject* pattern, PyObject* string,
-           int start, int end)
+           Py_ssize_t start, Py_ssize_t end)
 {
     /* prepare state object */
 
-    int length;
+    Py_ssize_t length;
     int charsize;
     void* ptr;
 
@@ -1792,9 +1795,9 @@ state_fini(SRE_STATE* state)
     (((char*)(member) - (char*)(state)->beginning) / (state)->charsize)
 
 LOCAL(PyObject*)
-state_getslice(SRE_STATE* state, int index, PyObject* string, int empty)
+state_getslice(SRE_STATE* state, Py_ssize_t index, PyObject* string, int empty)
 {
-    int i, j;
+    Py_ssize_t i, j;
 
     index = (index - 1) * 2;
 
@@ -1854,10 +1857,10 @@ pattern_match(PatternObject* self, PyObject* args, PyObject* kw)
     int status;
 
     PyObject* string;
-    int start = 0;
-    int end = INT_MAX;
+    Py_ssize_t start = 0;
+    Py_ssize_t end = PY_SSIZE_T_MAX;
     static char* kwlist[] = { "pattern", "pos", "endpos", NULL };
-    if (!PyArg_ParseTupleAndKeywords(args, kw, "O|ii:match", kwlist,
+    if (!PyArg_ParseTupleAndKeywords(args, kw, "O|nn:match", kwlist,
                                      &string, &start, &end))
         return NULL;
 
@@ -1891,10 +1894,10 @@ pattern_search(PatternObject* self, PyObject* args, PyObject* kw)
     int status;
 
     PyObject* string;
-    int start = 0;
-    int end = INT_MAX;
+    Py_ssize_t start = 0;
+    Py_ssize_t end = PY_SSIZE_T_MAX;
     static char* kwlist[] = { "pattern", "pos", "endpos", NULL };
-    if (!PyArg_ParseTupleAndKeywords(args, kw, "O|ii:search", kwlist,
+    if (!PyArg_ParseTupleAndKeywords(args, kw, "O|nn:search", kwlist,
                                      &string, &start, &end))
         return NULL;
 
@@ -2029,13 +2032,13 @@ pattern_findall(PatternObject* self, PyObject* args, PyObject* kw)
     SRE_STATE state;
     PyObject* list;
     int status;
-    int i, b, e;
+    Py_ssize_t i, b, e;
 
     PyObject* string;
-    int start = 0;
-    int end = INT_MAX;
+    Py_ssize_t start = 0;
+    Py_ssize_t end = PY_SSIZE_T_MAX;
     static char* kwlist[] = { "source", "pos", "endpos", NULL };
-    if (!PyArg_ParseTupleAndKeywords(args, kw, "O|ii:findall", kwlist,
+    if (!PyArg_ParseTupleAndKeywords(args, kw, "O|nn:findall", kwlist,
                                      &string, &start, &end))
         return NULL;
 
@@ -2154,18 +2157,18 @@ pattern_split(PatternObject* self, PyObject* args, PyObject* kw)
     PyObject* list;
     PyObject* item;
     int status;
-    int n;
-    int i;
+    Py_ssize_t n;
+    Py_ssize_t i;
     void* last;
 
     PyObject* string;
-    int maxsplit = 0;
+    Py_ssize_t maxsplit = 0;
     static char* kwlist[] = { "source", "maxsplit", NULL };
-    if (!PyArg_ParseTupleAndKeywords(args, kw, "O|i:split", kwlist,
+    if (!PyArg_ParseTupleAndKeywords(args, kw, "O|n:split", kwlist,
                                      &string, &maxsplit))
         return NULL;
 
-    string = state_init(&state, self, string, 0, INT_MAX);
+    string = state_init(&state, self, string, 0, PY_SSIZE_T_MAX);
     if (!string)
         return NULL;
 
@@ -2259,7 +2262,7 @@ error:
 
 static PyObject*
 pattern_subx(PatternObject* self, PyObject* ptemplate, PyObject* string,
-             int count, int subn)
+             Py_ssize_t count, Py_ssize_t subn)
 {
     SRE_STATE state;
     PyObject* list;
@@ -2269,8 +2272,9 @@ pattern_subx(PatternObject* self, PyObject* ptemplate, PyObject* string,
     PyObject* match;
     void* ptr;
     int status;
-    int n;
-    int i, b, e;
+    Py_ssize_t n;
+    Py_ssize_t i, b, e;
+    int bint;
     int filter_is_callable;
 
     if (PyCallable_Check(ptemplate)) {
@@ -2281,7 +2285,8 @@ pattern_subx(PatternObject* self, PyObject* ptemplate, PyObject* string,
     } else {
         /* if not callable, check if it's a literal string */
         int literal;
-        ptr = getstring(ptemplate, &n, &b);
+        ptr = getstring(ptemplate, &n, &bint);
+        b = bint;
         if (ptr) {
             if (b == 1) {
 		    literal = sre_literal_template((unsigned char *)ptr, n);
@@ -2310,7 +2315,7 @@ pattern_subx(PatternObject* self, PyObject* ptemplate, PyObject* string,
         }
     }
 
-    string = state_init(&state, self, string, 0, INT_MAX);
+    string = state_init(&state, self, string, 0, PY_SSIZE_T_MAX);
     if (!string) {
         Py_DECREF(filter);
         return NULL;
@@ -2443,9 +2448,9 @@ pattern_sub(PatternObject* self, PyObject* args, PyObject* kw)
 {
     PyObject* ptemplate;
     PyObject* string;
-    int count = 0;
+    Py_ssize_t count = 0;
     static char* kwlist[] = { "repl", "string", "count", NULL };
-    if (!PyArg_ParseTupleAndKeywords(args, kw, "OO|i:sub", kwlist,
+    if (!PyArg_ParseTupleAndKeywords(args, kw, "OO|n:sub", kwlist,
                                      &ptemplate, &string, &count))
         return NULL;
 
@@ -2457,9 +2462,9 @@ pattern_subn(PatternObject* self, PyObject* args, PyObject* kw)
 {
     PyObject* ptemplate;
     PyObject* string;
-    int count = 0;
+    Py_ssize_t count = 0;
     static char* kwlist[] = { "repl", "string", "count", NULL };
-    if (!PyArg_ParseTupleAndKeywords(args, kw, "OO|i:subn", kwlist,
+    if (!PyArg_ParseTupleAndKeywords(args, kw, "OO|n:subn", kwlist,
                                      &ptemplate, &string, &count))
         return NULL;
 
@@ -2642,15 +2647,15 @@ _compile(PyObject* self_, PyObject* args)
     /* "compile" pattern descriptor to pattern object */
 
     PatternObject* self;
-    int i, n;
+    Py_ssize_t i, n;
 
     PyObject* pattern;
     int flags = 0;
     PyObject* code;
-    int groups = 0;
+    Py_ssize_t groups = 0;
     PyObject* groupindex = NULL;
     PyObject* indexgroup = NULL;
-    if (!PyArg_ParseTuple(args, "OiO!|iOO", &pattern, &flags,
+    if (!PyArg_ParseTuple(args, "OiO!|nOO", &pattern, &flags,
                           &PyList_Type, &code, &groups,
                           &groupindex, &indexgroup))
         return NULL;
@@ -2711,7 +2716,7 @@ match_dealloc(MatchObject* self)
 }
 
 static PyObject*
-match_getslice_by_index(MatchObject* self, int index, PyObject* def)
+match_getslice_by_index(MatchObject* self, Py_ssize_t index, PyObject* def)
 {
     if (index < 0 || index >= self->groups) {
         /* raise IndexError if we were given a bad group number */
@@ -2735,21 +2740,21 @@ match_getslice_by_index(MatchObject* self, int index, PyObject* def)
         );
 }
 
-static int
+static Py_ssize_t
 match_getindex(MatchObject* self, PyObject* index)
 {
-    int i;
+    Py_ssize_t i;
 
     if (PyInt_Check(index))
-        return (int) PyInt_AS_LONG(index);
+        return PyInt_AsSsize_t(index);
 
     i = -1;
 
     if (self->pattern->groupindex) {
         index = PyObject_GetItem(self->pattern->groupindex, index);
         if (index) {
-            if (PyInt_Check(index))
-                i = (int) PyInt_AS_LONG(index);
+            if (PyInt_Check(index) || PyLong_Check(index))
+                i = PyInt_AsSsize_t(index);
             Py_DECREF(index);
         } else
             PyErr_Clear();
@@ -2778,7 +2783,7 @@ static PyObject*
 match_group(MatchObject* self, PyObject* args)
 {
     PyObject* result;
-    int i, size;
+    Py_ssize_t i, size;
 
     size = PyTuple_GET_SIZE(args);
 
@@ -2813,7 +2818,7 @@ static PyObject*
 match_groups(MatchObject* self, PyObject* args, PyObject* kw)
 {
     PyObject* result;
-    int index;
+    Py_ssize_t index;
 
     PyObject* def = Py_None;
     static char* kwlist[] = { "default", NULL };
@@ -2842,7 +2847,7 @@ match_groupdict(MatchObject* self, PyObject* args, PyObject* kw)
 {
     PyObject* result;
     PyObject* keys;
-    int index;
+    Py_ssize_t index;
 
     PyObject* def = Py_None;
     static char* kwlist[] = { "default", NULL };
@@ -2888,7 +2893,7 @@ failed:
 static PyObject*
 match_start(MatchObject* self, PyObject* args)
 {
-    int index;
+    Py_ssize_t index;
 
     PyObject* index_ = Py_False; /* zero */
     if (!PyArg_UnpackTuple(args, "start", 0, 1, &index_))
@@ -2911,7 +2916,7 @@ match_start(MatchObject* self, PyObject* args)
 static PyObject*
 match_end(MatchObject* self, PyObject* args)
 {
-    int index;
+    Py_ssize_t index;
 
     PyObject* index_ = Py_False; /* zero */
     if (!PyArg_UnpackTuple(args, "end", 0, 1, &index_))
@@ -2932,7 +2937,7 @@ match_end(MatchObject* self, PyObject* args)
 }
 
 LOCAL(PyObject*)
-_pair(int i1, int i2)
+_pair(Py_ssize_t i1, Py_ssize_t i2)
 {
     PyObject* pair;
     PyObject* item;
@@ -2941,12 +2946,12 @@ _pair(int i1, int i2)
     if (!pair)
         return NULL;
 
-    item = PyInt_FromLong(i1);
+    item = PyInt_FromSsize_t(i1);
     if (!item)
         goto error;
     PyTuple_SET_ITEM(pair, 0, item);
 
-    item = PyInt_FromLong(i2);
+    item = PyInt_FromSsize_t(i2);
     if (!item)
         goto error;
     PyTuple_SET_ITEM(pair, 1, item);
@@ -2961,7 +2966,7 @@ _pair(int i1, int i2)
 static PyObject*
 match_span(MatchObject* self, PyObject* args)
 {
-    int index;
+    Py_ssize_t index;
 
     PyObject* index_ = Py_False; /* zero */
     if (!PyArg_UnpackTuple(args, "span", 0, 1, &index_))
@@ -2986,7 +2991,7 @@ match_regs(MatchObject* self)
 {
     PyObject* regs;
     PyObject* item;
-    int index;
+    Py_ssize_t index;
 
     regs = PyTuple_New(self->groups);
     if (!regs)
@@ -3012,7 +3017,7 @@ match_copy(MatchObject* self, PyObject *unused)
 {
 #ifdef USE_BUILTIN_COPY
     MatchObject* copy;
-    int slots, offset;
+    Py_ssize_t slots, offset;
 
     slots = 2 * (self->pattern->groups+1);
 
@@ -3029,7 +3034,7 @@ match_copy(MatchObject* self, PyObject *unused)
     Py_XINCREF(self->regs);
 
     memcpy((char*) copy + offset, (char*) self + offset,
-           sizeof(MatchObject) + slots * sizeof(int) - offset);
+           sizeof(MatchObject) + slots * sizeof(Py_ssize_t) - offset);
 
     return (PyObject*) copy;
 #else
@@ -3144,7 +3149,7 @@ match_getattr(MatchObject* self, char* name)
 static PyTypeObject Match_Type = {
     PyObject_HEAD_INIT(NULL)
     0, "_" SRE_MODULE ".SRE_Match",
-    sizeof(MatchObject), sizeof(int),
+    sizeof(MatchObject), sizeof(Py_ssize_t),
     (destructor)match_dealloc, /*tp_dealloc*/
     0, /*tp_print*/
     (getattrfunc)match_getattr /*tp_getattr*/
@@ -3156,7 +3161,7 @@ pattern_new_match(PatternObject* pattern, SRE_STATE* state, int status)
     /* create match object (from state object) */
 
     MatchObject* match;
-    int i, j;
+    Py_ssize_t i, j;
     char* base;
     int n;
 
@@ -3329,9 +3334,9 @@ pattern_scanner(PatternObject* pattern, PyObject* args)
     ScannerObject* self;
 
     PyObject* string;
-    int start = 0;
-    int end = INT_MAX;
-    if (!PyArg_ParseTuple(args, "O|ii:scanner", &string, &start, &end))
+    Py_ssize_t start = 0;
+    Py_ssize_t end = PY_SSIZE_T_MAX;
+    if (!PyArg_ParseTuple(args, "O|nn:scanner", &string, &start, &end))
         return NULL;
 
     /* create scanner object */
diff --git a/Modules/_ssl.c b/Modules/_ssl.c
index f49391d..3b91b24 100644
--- a/Modules/_ssl.c
+++ b/Modules/_ssl.c
@@ -26,6 +26,12 @@ enum py_ssl_error {
 /* Include symbols from _socket module */
 #include "socketmodule.h"
 
+#if defined(HAVE_POLL_H) 
+#include <poll.h>
+#elif defined(HAVE_SYS_POLL_H)
+#include <sys/poll.h>
+#endif
+
 /* Include OpenSSL header files */
 #include "openssl/rsa.h"
 #include "openssl/crypto.h"
@@ -351,7 +357,7 @@ static void PySSL_dealloc(PySSLObject *self)
 	PyObject_Del(self);
 }
 
-/* If the socket has a timeout, do a select() on the socket.
+/* If the socket has a timeout, do a select()/poll() on the socket.
    The argument writing indicates the direction.
    Returns one of the possibilities in the timeout_state enum (above).
  */
@@ -373,6 +379,26 @@ check_socket_and_wait_for_timeout(PySocketSockObject *s, int writing)
 	if (s->sock_fd < 0)
 		return SOCKET_HAS_BEEN_CLOSED;
 
+	/* Prefer poll, if available, since you can poll() any fd
+	 * which can't be done with select(). */
+#ifdef HAVE_POLL
+	{
+		struct pollfd pollfd;
+		int timeout;
+
+		pollfd.fd = s->sock_fd;
+		pollfd.events = writing ? POLLOUT : POLLIN;
+
+		/* s->sock_timeout is in seconds, timeout in ms */
+		timeout = (int)(s->sock_timeout * 1000 + 0.5);
+		Py_BEGIN_ALLOW_THREADS
+		rc = poll(&pollfd, 1, timeout);
+		Py_END_ALLOW_THREADS
+
+		goto normal_return;
+	}
+#endif
+
 	/* Guard against socket too large for select*/
 #ifndef Py_SOCKET_FD_CAN_BE_GE_FD_SETSIZE
 	if (s->sock_fd >= FD_SETSIZE)
@@ -393,6 +419,7 @@ check_socket_and_wait_for_timeout(PySocketSockObject *s, int writing)
 		rc = select(s->sock_fd+1, &fds, NULL, NULL, &tv);
 	Py_END_ALLOW_THREADS
 
+normal_return:
 	/* Return SOCKET_TIMED_OUT on timeout, SOCKET_OPERATION_OK otherwise
 	   (when we are able to write or when there's something to read) */
 	return rc == 0 ? SOCKET_HAS_TIMED_OUT : SOCKET_OPERATION_OK;
diff --git a/Modules/_struct.c b/Modules/_struct.c
index df243ec..8d0a3bc 100644
--- a/Modules/_struct.c
+++ b/Modules/_struct.c
@@ -31,6 +31,17 @@ static PyObject *pylong_ulong_mask = NULL;
 static PyObject *pyint_zero = NULL;
 #endif
 
+/* If PY_STRUCT_FLOAT_COERCE is defined, the struct module will allow float
+   arguments for integer formats with a warning for backwards
+   compatibility. */
+
+#define PY_STRUCT_FLOAT_COERCE 1
+
+#ifdef PY_STRUCT_FLOAT_COERCE
+#define FLOAT_COERCE "integer argument expected, got float"
+#endif
+
+
 /* The translation function for each format character is table driven */
 typedef struct _formatdef {
 	char format;
@@ -135,6 +146,21 @@ get_long(PyObject *v, long *p)
 {
 	long x = PyInt_AsLong(v);
 	if (x == -1 && PyErr_Occurred()) {
+#ifdef PY_STRUCT_FLOAT_COERCE
+		if (PyFloat_Check(v)) {
+			PyObject *o;
+			int res;
+			PyErr_Clear();
+			if (PyErr_WarnEx(PyExc_DeprecationWarning, FLOAT_COERCE, 2) < 0)
+				return -1;
+			o = PyNumber_Int(v);
+			if (o == NULL)
+				return -1;
+			res = get_long(o, p);
+			Py_DECREF(o);
+			return res;
+		}
+#endif
 		if (PyErr_ExceptionMatches(PyExc_TypeError))
 			PyErr_SetString(StructError,
 					"required argument is not an integer");
@@ -214,15 +240,33 @@ get_ulonglong(PyObject *v, unsigned PY_LONG_LONG *p)
 /* Helper routine to get a Python integer and raise the appropriate error
    if it isn't one */
 
+#define INT_OVERFLOW "struct integer overflow masking is deprecated"
+
 static int
 get_wrapped_long(PyObject *v, long *p)
 {
 	if (get_long(v, p) < 0) {
-		if (PyLong_Check(v) && PyErr_ExceptionMatches(PyExc_OverflowError)) {
+		if (PyLong_Check(v) &&
+		    PyErr_ExceptionMatches(PyExc_OverflowError)) {
 			PyObject *wrapped;
 			long x;
 			PyErr_Clear();
-			if (PyErr_Warn(PyExc_DeprecationWarning, "struct integer overflow masking is deprecated") < 0)
+#ifdef PY_STRUCT_FLOAT_COERCE
+			if (PyFloat_Check(v)) {
+				PyObject *o;
+				int res;
+				PyErr_Clear();
+				if (PyErr_WarnEx(PyExc_DeprecationWarning, FLOAT_COERCE, 2) < 0)
+					return -1;
+				o = PyNumber_Int(v);
+				if (o == NULL)
+					return -1;
+				res = get_wrapped_long(o, p);
+				Py_DECREF(o);
+				return res;
+			}
+#endif
+			if (PyErr_WarnEx(PyExc_DeprecationWarning, INT_OVERFLOW, 2) < 0)
 				return -1;
 			wrapped = PyNumber_And(v, pylong_ulong_mask);
 			if (wrapped == NULL)
@@ -246,10 +290,25 @@ get_wrapped_ulong(PyObject *v, unsigned long *p)
 	if (x == -1 && PyErr_Occurred()) {
 		PyObject *wrapped;
 		PyErr_Clear();
+#ifdef PY_STRUCT_FLOAT_COERCE
+		if (PyFloat_Check(v)) {
+			PyObject *o;
+			int res;
+			PyErr_Clear();
+			if (PyErr_WarnEx(PyExc_DeprecationWarning, FLOAT_COERCE, 2) < 0)
+				return -1;
+			o = PyNumber_Int(v);
+			if (o == NULL)
+				return -1;
+			res = get_wrapped_ulong(o, p);
+			Py_DECREF(o);
+			return res;
+		}
+#endif
 		wrapped = PyNumber_And(v, pylong_ulong_mask);
 		if (wrapped == NULL)
 			return -1;
-		if (PyErr_Warn(PyExc_DeprecationWarning, "struct integer overflow masking is deprecated") < 0) {
+		if (PyErr_WarnEx(PyExc_DeprecationWarning, INT_OVERFLOW, 2) < 0) {
 			Py_DECREF(wrapped);
 			return -1;
 		}
@@ -344,8 +403,8 @@ _range_error(const formatdef *f, int is_unsigned)
 		Py_XDECREF(ptraceback);
 		if (msg == NULL)
 			return -1;
-		rval = PyErr_Warn(PyExc_DeprecationWarning,
-				  PyString_AS_STRING(msg));
+		rval = PyErr_WarnEx(PyExc_DeprecationWarning,
+				    PyString_AS_STRING(msg), 2);
 		Py_DECREF(msg);
 		if (rval == 0)
 			return 0;
@@ -1396,23 +1455,17 @@ s_unpack_internal(PyStructObject *soself, char *startfrom) {
 		const char *res = startfrom + code->offset;
 		if (e->format == 's') {
 			v = PyString_FromStringAndSize(res, code->size);
-			if (v == NULL)
-				goto fail;
-			PyTuple_SET_ITEM(result, i++, v);
 		} else if (e->format == 'p') {
 			Py_ssize_t n = *(unsigned char*)res;
 			if (n >= code->size)
 				n = code->size - 1;
 			v = PyString_FromStringAndSize(res + 1, n);
-			if (v == NULL)
-				goto fail;
-			PyTuple_SET_ITEM(result, i++, v);
 		} else {
 			v = e->unpack(res, e);
-			if (v == NULL)
-				goto fail;
-			PyTuple_SET_ITEM(result, i++, v);
 		}
+		if (v == NULL)
+			goto fail;
+		PyTuple_SET_ITEM(result, i++, v);
 	}
 
 	return result;
@@ -1438,7 +1491,8 @@ s_unpack(PyObject *self, PyObject *inputstr)
 	if (inputstr == NULL || !PyString_Check(inputstr) ||
 		PyString_GET_SIZE(inputstr) != soself->s_size) {
 		PyErr_Format(StructError,
-			"unpack requires a string argument of length %zd", soself->s_size);
+			"unpack requires a string argument of length %zd",
+			soself->s_size);
 		return NULL;
 	}
 	return s_unpack_internal(soself, PyString_AS_STRING(inputstr));
@@ -1504,17 +1558,18 @@ static int
 s_pack_internal(PyStructObject *soself, PyObject *args, int offset, char* buf)
 {
 	formatcode *code;
+	/* XXX(nnorwitz): why does i need to be a local?  can we use
+	   the offset parameter or do we need the wider width? */
 	Py_ssize_t i;
 
 	memset(buf, '\0', soself->s_size);
 	i = offset;
 	for (code = soself->s_codes; code->fmtdef != NULL; code++) {
 		Py_ssize_t n;
-		PyObject *v;
+		PyObject *v = PyTuple_GET_ITEM(args, i++);
 		const formatdef *e = code->fmtdef;
 		char *res = buf + code->offset;
 		if (e->format == 's') {
-			v = PyTuple_GET_ITEM(args, i++);
 			if (!PyString_Check(v)) {
 				PyErr_SetString(StructError,
 						"argument for 's' must be a string");
@@ -1526,7 +1581,6 @@ s_pack_internal(PyStructObject *soself, PyObject *args, int offset, char* buf)
 			if (n > 0)
 				memcpy(res, PyString_AS_STRING(v), n);
 		} else if (e->format == 'p') {
-			v = PyTuple_GET_ITEM(args, i++);
 			if (!PyString_Check(v)) {
 				PyErr_SetString(StructError,
 						"argument for 'p' must be a string");
@@ -1541,7 +1595,6 @@ s_pack_internal(PyStructObject *soself, PyObject *args, int offset, char* buf)
 				n = 255;
 			*res = Py_SAFE_DOWNCAST(n, Py_ssize_t, unsigned char);
 		} else {
-			v = PyTuple_GET_ITEM(args, i++);
 			if (e->pack(res, v, e) < 0) {
 				if (PyLong_Check(v) && PyErr_ExceptionMatches(PyExc_OverflowError))
 					PyErr_SetString(StructError,
@@ -1818,4 +1871,8 @@ init_struct(void)
 #ifdef PY_STRUCT_OVERFLOW_MASKING
 	PyModule_AddIntConstant(m, "_PY_STRUCT_OVERFLOW_MASKING", 1);
 #endif
+#ifdef PY_STRUCT_FLOAT_COERCE
+	PyModule_AddIntConstant(m, "_PY_STRUCT_FLOAT_COERCE", 1);
+#endif
+
 }
diff --git a/Modules/_testcapimodule.c b/Modules/_testcapimodule.c
index 6b9dffd..f5f3ab2 100644
--- a/Modules/_testcapimodule.c
+++ b/Modules/_testcapimodule.c
@@ -294,6 +294,16 @@ test_L_code(PyObject *self)
 
 #endif	/* ifdef HAVE_LONG_LONG */
 
+/* Test tuple argument processing */
+static PyObject *
+getargs_tuple(PyObject *self, PyObject *args)
+{
+	int a, b, c;
+	if (!PyArg_ParseTuple(args, "i(ii)", &a, &b, &c))
+		return NULL;
+	return Py_BuildValue("iii", a, b, c);
+}
+
 /* Functions to call PyArg_ParseTuple with integer format codes,
    and return the result.
 */
@@ -696,6 +706,13 @@ test_string_from_format(PyObject *self, PyObject *args)
 #undef CHECK_1_FORMAT
 }
 
+/* This is here to provide a docstring for test_descr. */
+static PyObject *
+test_with_docstring(PyObject *self)
+{
+	Py_RETURN_NONE;
+}
+
 static PyMethodDef TestMethods[] = {
 	{"raise_exception",	raise_exception,		 METH_VARARGS},
 	{"test_config",		(PyCFunction)test_config,	 METH_NOARGS},
@@ -706,7 +723,10 @@ static PyMethodDef TestMethods[] = {
 	{"test_k_code",		(PyCFunction)test_k_code,	 METH_NOARGS},
 	{"test_null_strings",	(PyCFunction)test_null_strings,	 METH_NOARGS},
 	{"test_string_from_format", (PyCFunction)test_string_from_format, METH_NOARGS},
+	{"test_with_docstring", (PyCFunction)test_with_docstring, METH_NOARGS,
+	 PyDoc_STR("This is a pretty normal docstring.")},
 
+	{"getargs_tuple",	getargs_tuple,			 METH_VARARGS},
 	{"getargs_b",		getargs_b,			 METH_VARARGS},
 	{"getargs_B",		getargs_B,			 METH_VARARGS},
 	{"getargs_H",		getargs_H,			 METH_VARARGS},
diff --git a/Modules/_tkinter.c b/Modules/_tkinter.c
index cec83f5..088fbb9 100644
--- a/Modules/_tkinter.c
+++ b/Modules/_tkinter.c
@@ -932,12 +932,13 @@ AsObj(PyObject *value)
 #ifdef Py_USING_UNICODE
 	else if (PyUnicode_Check(value)) {
 		Py_UNICODE *inbuf = PyUnicode_AS_UNICODE(value);
-		int size = PyUnicode_GET_SIZE(value);
+		Py_ssize_t size = PyUnicode_GET_SIZE(value);
 		/* This #ifdef assumes that Tcl uses UCS-2.
 		   See TCL_UTF_MAX test above. */
 #if defined(Py_UNICODE_WIDE) && TCL_UTF_MAX == 3
 		Tcl_UniChar *outbuf;
-		int i;
+		Py_ssize_t i;
+		assert(size < size * sizeof(Tcl_UniChar));
 		outbuf = (Tcl_UniChar*)ckalloc(size * sizeof(Tcl_UniChar));
 		if (!outbuf) {
 			PyErr_NoMemory();
@@ -2103,8 +2104,8 @@ Tkapp_CreateCommand(PyObject *selfptr, PyObject *args)
 	data = PyMem_NEW(PythonCmd_ClientData, 1);
 	if (!data)
 		return PyErr_NoMemory();
-	Py_XINCREF(self);
-	Py_XINCREF(func);
+	Py_INCREF(self);
+	Py_INCREF(func);
 	data->self = selfptr;
 	data->func = func;
 	
diff --git a/Modules/_typesmodule.c b/Modules/_typesmodule.c
new file mode 100644
index 0000000..5a6f2b9
--- /dev/null
+++ b/Modules/_typesmodule.c
@@ -0,0 +1,94 @@
+/* This extension module exposes some types that are only available at the
+ * C level.  It should not be used directly, but instead through the Python
+ * level types modules, which imports this.
+ */
+
+#include "Python.h"
+#include "structmember.h"
+
+typedef struct
+{
+    PyObject_HEAD
+    int member;
+} Helper;
+
+static PyMemberDef helper_members[] = {
+    { "member", T_INT,  offsetof(Helper, member), READONLY,
+      PyDoc_STR("A member descriptor")
+    },
+    { NULL }
+};
+
+static PyObject *
+helper_getter(Helper *self, void *unused) 
+{
+    Py_RETURN_NONE;
+}
+
+static PyGetSetDef helper_getset[] = {
+    { "getter", (getter)helper_getter, NULL,
+      PyDoc_STR("A getset descriptor"),
+    },
+    { NULL }
+};
+
+static PyTypeObject HelperType = {
+    PyObject_HEAD_INIT(NULL)
+    0,						/* ob_size */
+    "_types.Helper",				/* tp_name */
+    sizeof(Helper),                             /* tp_basicsize */
+    0,						/* tp_itemsize */
+    0,						/* tp_dealloc */
+    0,						/* tp_print */
+    0,						/* tp_getattr */
+    0,						/* tp_setattr */
+    0,						/* tp_compare */
+    0,                                          /* tp_repr */
+    0,                                          /* tp_as_number */
+    0,						/* tp_as_sequence */
+    0,						/* tp_as_mapping */
+    0,                                          /* tp_hash */
+    0,              				/* tp_call */
+    0,          				/* tp_str */
+    0,                                          /* tp_getattro */
+    0,						/* tp_setattro */
+    0,						/* tp_as_buffer */
+    Py_TPFLAGS_DEFAULT,                         /* tp_flags */
+    0,      					/* tp_doc */
+    0,						/* tp_traverse */
+    0,						/* tp_clear */
+    0,                                          /* tp_richcompare */
+    0,						/* tp_weaklistoffset */
+    0,						/* tp_iter */
+    0,						/* tp_iternext */
+    0,      					/* tp_methods */
+    helper_members,                             /* tp_members */
+    helper_getset,                              /* tp_getset */
+    0,						/* tp_base */
+    0,						/* tp_dict */
+    0,						/* tp_descr_get */
+    0,						/* tp_descr_set */
+    0,						/* tp_dictoffset */
+    0,						/* tp_init */
+    0,						/* tp_alloc */
+    0,                                          /* tp_new */
+    0,						/* tp_free */
+};
+
+PyMODINIT_FUNC
+init_types(void)
+{
+    PyObject *m;
+
+    m = Py_InitModule3("_types", NULL, "A types module helper");
+    if (!m)
+        return;
+
+    if (PyType_Ready(&HelperType) < 0)
+        return;
+
+    Py_INCREF(&HelperType);
+    PyModule_AddObject(m, "Helper", (PyObject *)&HelperType);
+}
+
+    
diff --git a/Modules/_weakref.c b/Modules/_weakref.c
index 2dfdc14..1712f12 100644
--- a/Modules/_weakref.c
+++ b/Modules/_weakref.c
@@ -17,7 +17,7 @@ weakref_getweakrefcount(PyObject *self, PyObject *object)
     if (PyType_SUPPORTS_WEAKREFS(object->ob_type)) {
         PyWeakReference **list = GET_WEAKREFS_LISTPTR(object);
 
-        result = PyInt_FromLong(_PyWeakref_GetWeakrefCount(*list));
+        result = PyInt_FromSsize_t(_PyWeakref_GetWeakrefCount(*list));
     }
     else
         result = PyInt_FromLong(0);
@@ -37,12 +37,12 @@ weakref_getweakrefs(PyObject *self, PyObject *object)
 
     if (PyType_SUPPORTS_WEAKREFS(object->ob_type)) {
         PyWeakReference **list = GET_WEAKREFS_LISTPTR(object);
-        long count = _PyWeakref_GetWeakrefCount(*list);
+        Py_ssize_t count = _PyWeakref_GetWeakrefCount(*list);
 
         result = PyList_New(count);
         if (result != NULL) {
             PyWeakReference *current = *list;
-            long i;
+            Py_ssize_t i;
             for (i = 0; i < count; ++i) {
                 PyList_SET_ITEM(result, i, (PyObject *) current);
                 Py_INCREF(current);
diff --git a/Modules/arraymodule.c b/Modules/arraymodule.c
index 100b341..b739cc8 100644
--- a/Modules/arraymodule.c
+++ b/Modules/arraymodule.c
@@ -10,9 +10,9 @@
 #ifdef STDC_HEADERS
 #include <stddef.h>
 #else /* !STDC_HEADERS */
-#ifndef DONT_HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>		/* For size_t */
-#endif /* DONT_HAVE_SYS_TYPES_H */
+#endif /* HAVE_SYS_TYPES_H */
 #endif /* !STDC_HEADERS */
 
 struct arrayobject; /* Forward */
@@ -1785,6 +1785,7 @@ static PyBufferProcs array_as_buffer = {
 	(readbufferproc)array_buffer_getreadbuf,
 	(writebufferproc)array_buffer_getwritebuf,
 	(segcountproc)array_buffer_getsegcount,
+	NULL,
 };
 
 static PyObject *
diff --git a/Modules/binascii.c b/Modules/binascii.c
index 71a9624..3b2c8b2 100644
--- a/Modules/binascii.c
+++ b/Modules/binascii.c
@@ -909,7 +909,7 @@ binascii_hexlify(PyObject *self, PyObject *args)
 	char* retbuf;
 	Py_ssize_t i, j;
 
-	if (!PyArg_ParseTuple(args, "t#:b2a_hex", &argbuf, &arglen))
+	if (!PyArg_ParseTuple(args, "s#:b2a_hex", &argbuf, &arglen))
 		return NULL;
 
 	retval = PyString_FromStringAndSize(NULL, arglen*2);
diff --git a/Modules/bz2module.c b/Modules/bz2module.c
index 9576895..b0075a0 100644
--- a/Modules/bz2module.c
+++ b/Modules/bz2module.c
@@ -1303,7 +1303,11 @@ BZ2File_init(BZ2FileObject *self, PyObject *args, PyObject *kwargs)
 				break;
 
 			case 'U':
+#ifdef __VMS
+				self->f_univ_newline = 0;
+#else
 				self->f_univ_newline = 1;
+#endif
 				break;
 
 			default:
@@ -1336,8 +1340,10 @@ BZ2File_init(BZ2FileObject *self, PyObject *args, PyObject *kwargs)
 
 #ifdef WITH_THREAD
 	self->lock = PyThread_allocate_lock();
-	if (!self->lock)
+	if (!self->lock) {
+		PyErr_SetString(PyExc_MemoryError, "unable to allocate lock");
 		goto error;
+	}
 #endif
 
 	if (mode_char == 'r')
@@ -1359,10 +1365,12 @@ BZ2File_init(BZ2FileObject *self, PyObject *args, PyObject *kwargs)
 	return 0;
 
 error:
-	Py_DECREF(self->file);
+	Py_CLEAR(self->file);
 #ifdef WITH_THREAD
-	if (self->lock)
+	if (self->lock) {
 		PyThread_free_lock(self->lock);
+		self->lock = NULL;
+	}
 #endif
 	return -1;
 }
@@ -1562,7 +1570,7 @@ BZ2Comp_compress(BZ2CompObject *self, PyObject *args)
 		}
 	}
 
-	_PyString_Resize(&ret, (int)(BZS_TOTAL_OUT(bzs) - totalout));
+	_PyString_Resize(&ret, (Py_ssize_t)(BZS_TOTAL_OUT(bzs) - totalout));
 
 	RELEASE_LOCK(self);
 	return ret;
@@ -1628,7 +1636,7 @@ BZ2Comp_flush(BZ2CompObject *self)
 	}
 
 	if (bzs->avail_out != 0)
-		_PyString_Resize(&ret, (int)(BZS_TOTAL_OUT(bzs) - totalout));
+		_PyString_Resize(&ret, (Py_ssize_t)(BZS_TOTAL_OUT(bzs) - totalout));
 
 	RELEASE_LOCK(self);
 	return ret;
@@ -1670,8 +1678,10 @@ BZ2Comp_init(BZ2CompObject *self, PyObject *args, PyObject *kwargs)
 
 #ifdef WITH_THREAD
 	self->lock = PyThread_allocate_lock();
-	if (!self->lock)
+	if (!self->lock) {
+		PyErr_SetString(PyExc_MemoryError, "unable to allocate lock");
 		goto error;
+	}
 #endif
 
 	memset(&self->bzs, 0, sizeof(bz_stream));
@@ -1686,8 +1696,10 @@ BZ2Comp_init(BZ2CompObject *self, PyObject *args, PyObject *kwargs)
 	return 0;
 error:
 #ifdef WITH_THREAD
-	if (self->lock)
+	if (self->lock) {
 		PyThread_free_lock(self->lock);
+		self->lock = NULL;
+	}
 #endif
 	return -1;
 }
@@ -1852,7 +1864,7 @@ BZ2Decomp_decompress(BZ2DecompObject *self, PyObject *args)
 	}
 
 	if (bzs->avail_out != 0)
-		_PyString_Resize(&ret, (int)(BZS_TOTAL_OUT(bzs) - totalout));
+		_PyString_Resize(&ret, (Py_ssize_t)(BZS_TOTAL_OUT(bzs) - totalout));
 
 	RELEASE_LOCK(self);
 	return ret;
@@ -1882,8 +1894,10 @@ BZ2Decomp_init(BZ2DecompObject *self, PyObject *args, PyObject *kwargs)
 
 #ifdef WITH_THREAD
 	self->lock = PyThread_allocate_lock();
-	if (!self->lock)
+	if (!self->lock) {
+		PyErr_SetString(PyExc_MemoryError, "unable to allocate lock");
 		goto error;
+	}
 #endif
 
 	self->unused_data = PyString_FromString("");
@@ -1903,10 +1917,12 @@ BZ2Decomp_init(BZ2DecompObject *self, PyObject *args, PyObject *kwargs)
 
 error:
 #ifdef WITH_THREAD
-	if (self->lock)
+	if (self->lock) {
 		PyThread_free_lock(self->lock);
+		self->lock = NULL;
+	}
 #endif
-	Py_XDECREF(self->unused_data);
+	Py_CLEAR(self->unused_data);
 	return -1;
 }
 
@@ -2061,7 +2077,7 @@ bz2_compress(PyObject *self, PyObject *args, PyObject *kwargs)
 	}
 
 	if (bzs->avail_out != 0)
-		_PyString_Resize(&ret, (int)BZS_TOTAL_OUT(bzs));
+		_PyString_Resize(&ret, (Py_ssize_t)BZS_TOTAL_OUT(bzs));
 	BZ2_bzCompressEnd(bzs);
 
 	return ret;
@@ -2140,7 +2156,7 @@ bz2_decompress(PyObject *self, PyObject *args)
 	}
 
 	if (bzs->avail_out != 0)
-		_PyString_Resize(&ret, (int)BZS_TOTAL_OUT(bzs));
+		_PyString_Resize(&ret, (Py_ssize_t)BZS_TOTAL_OUT(bzs));
 	BZ2_bzDecompressEnd(bzs);
 
 	return ret;
diff --git a/Modules/cPickle.c b/Modules/cPickle.c
index 0d29362..24c98cc 100644
--- a/Modules/cPickle.c
+++ b/Modules/cPickle.c
@@ -196,7 +196,7 @@ Pdata_clear(Pdata *self, int clearto)
 	for (i = self->length, p = self->data + clearto;
 	     --i >= clearto;
 	     p++) {
-		Py_DECREF(*p);
+		Py_CLEAR(*p);
 	}
 	self->length = clearto;
 
@@ -208,6 +208,7 @@ Pdata_grow(Pdata *self)
 {
 	int bigger;
 	size_t nbytes;
+	PyObject **tmp;
 
 	bigger = self->size << 1;
 	if (bigger <= 0)	/* was 0, or new value overflows */
@@ -217,14 +218,14 @@ Pdata_grow(Pdata *self)
 	nbytes = (size_t)bigger * sizeof(PyObject *);
 	if (nbytes / sizeof(PyObject *) != (size_t)bigger)
 		goto nomemory;
-	self->data = realloc(self->data, nbytes);
-	if (self->data == NULL)
+	tmp = realloc(self->data, nbytes);
+	if (tmp == NULL)
 		goto nomemory;
+	self->data = tmp;
 	self->size = bigger;
 	return 0;
 
   nomemory:
-	self->size = 0;
 	PyErr_NoMemory();
 	return -1;
 }
@@ -2636,7 +2637,7 @@ Pickle_getvalue(Picklerobject *self, PyObject *args)
 			if (ik >= lm || ik == 0) {
 				PyErr_SetString(PicklingError,
 						"Invalid get data");
-				return NULL;
+				goto err;
 			}
 			if (have_get[ik]) /* with matching get */
 				rsize += ik < 256 ? 2 : 5;
@@ -2648,7 +2649,7 @@ Pickle_getvalue(Picklerobject *self, PyObject *args)
 			) {
 			PyErr_SetString(PicklingError,
 					"Unexpected data in internal list");
-			return NULL;
+			goto err;
 		}
 
 		else { /* put */
@@ -3400,11 +3401,11 @@ load_string(Unpicklerobject *self)
 	/********************************************/
 
 	str = PyString_DecodeEscape(p, len, NULL, 0, NULL);
+	free(s);
 	if (str) {
 		PDATA_PUSH(self->stack, str, -1);
 		res = 0;
 	}
-	free(s);
 	return res;
 
   insecure:
@@ -3628,10 +3629,14 @@ Instance_New(PyObject *cls, PyObject *args)
 
   err:
 	{
-		PyObject *tp, *v, *tb;
+		PyObject *tp, *v, *tb, *tmp_value;
 
 		PyErr_Fetch(&tp, &v, &tb);
-		if ((r=PyTuple_Pack(3,v,cls,args))) {
+		tmp_value = v;
+		/* NULL occurs when there was a KeyboardInterrupt */
+		if (tmp_value == NULL)
+			tmp_value = Py_None;
+		if ((r = PyTuple_Pack(3, tmp_value, cls, args))) {
 			Py_XDECREF(v);
 			v=r;
 		}
@@ -4159,6 +4164,7 @@ do_append(Unpicklerobject *self, int  x)
 		int list_len;
 
 		slice=Pdata_popList(self->stack, x);
+		if (! slice) return -1;
 		list_len = PyList_GET_SIZE(list);
 		i=PyList_SetSlice(list, list_len, list_len, slice);
 		Py_DECREF(slice);
@@ -5163,6 +5169,9 @@ newUnpicklerobject(PyObject *f)
 	if (!( self->memo = PyDict_New()))
 		goto err;
 
+	if (!self->stack)
+		goto err;
+
 	Py_INCREF(f);
 	self->file = f;
 
diff --git a/Modules/collectionsmodule.c b/Modules/collectionsmodule.c
index 0c7dca6..d761dce 100644
--- a/Modules/collectionsmodule.c
+++ b/Modules/collectionsmodule.c
@@ -10,7 +10,7 @@
 /* The block length may be set to any number over 1.  Larger numbers
  * reduce the number of calls to the memory allocator but take more
  * memory.  Ideally, BLOCKLEN should be set with an eye to the
- * length of a cache line.  
+ * length of a cache line.
  */
 
 #define BLOCKLEN 62
@@ -22,9 +22,9 @@
  * element is at d.leftblock[leftindex] and its last element is at
  * d.rightblock[rightindex]; note that, unlike as for Python slice
  * indices, these indices are inclusive on both ends.  By being inclusive
- * on both ends, algorithms for left and right operations become 
+ * on both ends, algorithms for left and right operations become
  * symmetrical which simplifies the design.
- * 
+ *
  * The list of blocks is never empty, so d.leftblock and d.rightblock
  * are never equal to NULL.
  *
@@ -37,11 +37,11 @@
  * d.leftindex == CENTER+1; and d.rightindex == CENTER.
  * Checking for d.len == 0 is the intended way to see whether d is empty.
  *
- * Whenever d.leftblock == d.rightblock, 
+ * Whenever d.leftblock == d.rightblock,
  *     d.leftindex + d.len - 1 == d.rightindex.
- * 
+ *
  * However, when d.leftblock != d.rightblock, d.leftindex and d.rightindex
- * become indices into distinct blocks and either may be larger than the 
+ * become indices into distinct blocks and either may be larger than the
  * other.
  */
 
@@ -381,7 +381,7 @@ deque_remove(dequeobject *deque, PyObject *value)
 		int cmp = PyObject_RichCompareBool(item, value, Py_EQ);
 
 		if (deque->len != n) {
-			PyErr_SetString(PyExc_IndexError, 
+			PyErr_SetString(PyExc_IndexError,
 				"deque mutated during remove().");
 			return NULL;
 		}
@@ -920,7 +920,7 @@ dequeiter_next(dequeiterobject *it)
 				"deque mutated during iteration");
 		return NULL;
 	}
-	assert (!(it->b == it->deque->rightblock && 
+	assert (!(it->b == it->deque->rightblock &&
 		  it->index > it->deque->rightindex));
 
 	item = it->b->data[it->index];
@@ -1016,7 +1016,7 @@ dequereviter_next(dequeiterobject *it)
 				"deque mutated during iteration");
 		return NULL;
 	}
-	assert (!(it->b == it->deque->leftblock && 
+	assert (!(it->b == it->deque->leftblock &&
 		  it->index < it->deque->leftindex));
 
 	item = it->b->data[it->index];
@@ -1117,7 +1117,7 @@ defdict_copy(defdictobject *dd)
 static PyObject *
 defdict_reduce(defdictobject *dd)
 {
-	/* __reduce__ must returns a 5-tuple as follows:
+	/* __reduce__ must return a 5-tuple as follows:
 
 	   - factory function
 	   - tuple of args for the factory function
@@ -1155,6 +1155,7 @@ defdict_reduce(defdictobject *dd)
 	}
 	result = PyTuple_Pack(5, dd->dict.ob_type, args,
 			      Py_None, Py_None, items);
+	Py_DECREF(items);
 	Py_DECREF(args);
 	return result;
 }
diff --git a/Modules/config.c.in b/Modules/config.c.in
index f811991..8c25eea 100644
--- a/Modules/config.c.in
+++ b/Modules/config.c.in
@@ -28,6 +28,7 @@ extern void PyMarshal_Init(void);
 extern void initimp(void);
 extern void initgc(void);
 extern void init_ast(void);
+extern void init_types(void);
 
 struct _inittab _PyImport_Inittab[] = {
 
@@ -42,6 +43,9 @@ struct _inittab _PyImport_Inittab[] = {
 	/* This lives in Python/Python-ast.c */
 	{"_ast", init_ast},
 
+	/* This lives in Python/_types.c */
+	{"_types", init_types},
+
 	/* These entries are here for sys.builtin_module_names */
 	{"__main__", NULL},
 	{"__builtin__", NULL},
diff --git a/Modules/cryptmodule.c b/Modules/cryptmodule.c
index 050a356..6377f84 100644
--- a/Modules/cryptmodule.c
+++ b/Modules/cryptmodule.c
@@ -5,6 +5,9 @@
 
 #include <sys/types.h>
 
+#ifdef __VMS
+#include <openssl/des.h>
+#endif
 
 /* Module crypt */
 
@@ -12,7 +15,9 @@
 static PyObject *crypt_crypt(PyObject *self, PyObject *args)
 {
 	char *word, *salt; 
+#ifndef __VMS
 	extern char * crypt(const char *, const char *);
+#endif
 
 	if (!PyArg_ParseTuple(args, "ss:crypt", &word, &salt)) {
 		return NULL;
diff --git a/Modules/dlmodule.c b/Modules/dlmodule.c
index 0955681..5622ed9 100644
--- a/Modules/dlmodule.c
+++ b/Modules/dlmodule.c
@@ -5,6 +5,10 @@
 
 #include <dlfcn.h>
 
+#ifdef __VMS
+#include <unistd.h>
+#endif
+
 #ifndef RTLD_LAZY
 #define RTLD_LAZY 1
 #endif
@@ -77,8 +81,8 @@ dl_call(dlobject *xp, PyObject *args)
                      long, long, long, long, long);
 	long alist[10];
 	long res;
-	int i;
-	int n = PyTuple_Size(args);
+	Py_ssize_t i;
+	Py_ssize_t n = PyTuple_Size(args);
 	if (n < 1) {
 		PyErr_SetString(PyExc_TypeError, "at least a name is needed");
 		return NULL;
@@ -186,6 +190,24 @@ dl_open(PyObject *self, PyObject *args)
 		PyErr_SetString(Dlerror, dlerror());
 		return NULL;
 	}
+#ifdef __VMS
+	/*   Under OpenVMS dlopen doesn't do any check, just save the name
+	 * for later use, so we have to check if the file is readable,
+	 * the name can be a logical or a file from SYS$SHARE.
+	 */
+	if (access(name, R_OK)) {
+		char fname[strlen(name) + 20];
+		strcpy(fname, "SYS$SHARE:");
+		strcat(fname, name);
+		strcat(fname, ".EXE");
+		if (access(fname, R_OK)) {
+			dlclose(handle);
+			PyErr_SetString(Dlerror,
+				"File not found or protection violation");
+			return NULL;
+		}
+	}
+#endif
 	return newdlobject(handle);
 }
 
diff --git a/Modules/expat/Makefile.in b/Modules/expat/Makefile.in
deleted file mode 100644
index 9790739..0000000
--- a/Modules/expat/Makefile.in
+++ /dev/null
@@ -1,158 +0,0 @@
-################################################################
-# Process this file with top-level configure script to produce Makefile
-#
-# Copyright 2000 Clark Cooper
-#
-#  This file is part of EXPAT.
-#
-#  EXPAT is free software; you can redistribute it and/or modify it
-#  under the terms of the License (based on the MIT/X license) contained
-#  in the file COPYING that comes with this distribution.
-#
-# EXPAT IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-# IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
-# CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-# SOFTWARE OR THE USE OR OTHER DEALINGS IN EXPAT.
-#
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-subdir = lib
-
-top_builddir = ..
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_DATA = @INSTALL_DATA@
-
-host_alias = @host_alias@
-host_triplet = @host@
-AS = @AS@
-CC = @CC@
-DLLTOOL = @DLLTOOL@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-OBJDUMP = @OBJDUMP@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-
-LIBRARY = libexpat.la
-SOURCES = xmlparse.c xmltok.c xmlrole.c
-OBJECTS = $(SOURCES:.c=.o)
-LTOBJECTS = $(SOURCES:.c=.lo)
-
-TEMPLATES = xmltok_impl.c xmltok_ns.c
-APIHEADER = expat.h
-HEADERS = ascii.h iasciitab.h utf8tab.h xmltok.h asciitab.h latin1tab.h \
-          nametab.h xmldef.h xmlrole.h xmltok_impl.h
-
-mkinstalldirs = $(SHELL) $(top_srcdir)/conftools/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES = 
-
-INCLUDES = -I$(srcdir) -I. -I..
-DEFS = @DEFS@ -DPACKAGE='"$(PACKAGE)"' -DVERSION='"$(PACKAGE)_$(VERSION)"'
-
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-CFLAGS = @CFLAGS@
-
-LIBREVISION = @LIBREVISION@
-LIBCURRENT  = @LIBCURRENT@
-LIBAGE      = @LIBAGE@
-
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link  $(CCLD) -version-info $(LIBCURRENT):$(LIBREVISION):$(LIBAGE) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(TEMPLATES) $(APIHEADER) $(HEADERS) 
-
-TAR = gtar
-GZIP_ENV = --best
-
-all: $(LIBRARY)
-
-.SUFFIXES: .c .lo .o
-.PHONY: all clean distclean maintainer-clean
-
-.c.o:
-	$(COMPILE) -c $<
-
-.c.lo:
-	$(LTCOMPILE) -c $<
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(top_builddir)/config.status: $(top_builddir)/configure
-	cd $(top_builddir) && $(MAKE) config.status
-
-$(top_builddir)/config.h: $(top_builddir)/config.h.in
-	cd $(top_builddir) && $(MAKE) config.h
-
-clean:
-	rm -f $(LIBRARY) *.o *.lo *~
-	rm -rf .libs _libs
-
-distclean: clean
-	rm -f Makefile
-
-maintainer-clean: distclean
-
-check:	$(SUBDIRS)
-	@echo
-	@echo This package does not yet have a regression test.
-	@echo
-
-install: $(LIBRARY) $(APIHEADER)
-	$(mkinstalldirs) $(libdir) $(includedir)
-	$(LIBTOOL) --mode=install $(INSTALL) $(LIBRARY) $(libdir)/$(LIBRARY)
-	$(INSTALL_DATA) $(APIHEADER) $(includedir)
-
-uninstall:
-	$(LIBTOOL) --mode=uninstall rm -f $(libdir)/$(LIBRARY);
-	rm -f $(libdir)/$(APIHEADER)
-
-$(LIBRARY): $(LTOBJECTS)
-	$(LINK) -rpath $(libdir) $(LDFLAGS) $(LTOBJECTS)
-
-xmlparse.o \
-xmlparse.lo: xmlparse.c expat.h xmlrole.h xmltok.h $(top_builddir)/config.h
-
-xmlrole.o \
-xmlrole.lo: xmlrole.c ascii.h xmlrole.h $(top_builddir)/config.h
-
-xmltok.o \
-xmltok.lo: xmltok.c xmltok_impl.c xmltok_ns.c \
-          ascii.h asciitab.h iasciitab.h latin1tab.h nametab.h utf8tab.h \
-          xmltok.h xmltok_impl.h $(top_builddir)/config.h
diff --git a/Modules/expat/amigaconfig.h b/Modules/expat/amigaconfig.h
new file mode 100644
index 0000000..6781a71
--- /dev/null
+++ b/Modules/expat/amigaconfig.h
@@ -0,0 +1,96 @@
+#ifndef AMIGACONFIG_H
+#define AMIGACONFIG_H
+
+/* 1234 = LIL_ENDIAN, 4321 = BIGENDIAN */
+#define BYTEORDER 4321
+
+/* Define to 1 if you have the `bcopy' function. */
+#define HAVE_BCOPY 1
+
+/* Define to 1 if you have the <check.h> header file. */
+#undef HAVE_CHECK_H
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#define HAVE_FCNTL_H 1
+
+/* Define to 1 if you have the `getpagesize' function. */
+#undef HAVE_GETPAGESIZE
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define to 1 if you have the `memmove' function. */
+#define HAVE_MEMMOVE 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have a working `mmap' system call. */
+#undef HAVE_MMAP
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "expat-bugs@mail.libexpat.org"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "expat"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "expat 1.95.8"
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "1.95.8"
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* whether byteorder is bigendian */
+#define WORDS_BIGENDIAN
+
+/* Define to specify how much context to retain around the current parse
+   point. */
+#define XML_CONTEXT_BYTES 1024
+
+/* Define to make parameter entity parsing functionality available. */
+#define XML_DTD
+
+/* Define to make XML Namespaces functionality available. */
+#define XML_NS
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `long' if <sys/types.h> does not define. */
+#undef off_t
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+#undef size_t
+
+
+#endif  /* AMIGACONFIG_H */
diff --git a/Modules/expat/expat.h b/Modules/expat/expat.h
index ecba92e..cf113ee 100644
--- a/Modules/expat/expat.h
+++ b/Modules/expat/expat.h
@@ -2,8 +2,8 @@
    See the file COPYING for copying permission.
 */
 
-#ifndef XmlParse_INCLUDED
-#define XmlParse_INCLUDED 1
+#ifndef Expat_INCLUDED
+#define Expat_INCLUDED 1
 
 #ifdef __VMS
 /*      0        1         2         3      0        1         2         3
@@ -17,6 +17,10 @@
 #include <stdlib.h>
 #include "expat_external.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 struct XML_ParserStruct;
 typedef struct XML_ParserStruct *XML_Parser;
 
@@ -87,7 +91,11 @@ enum XML_Error {
   XML_ERROR_NOT_SUSPENDED,
   XML_ERROR_ABORTED,
   XML_ERROR_FINISHED,
-  XML_ERROR_SUSPEND_PE
+  XML_ERROR_SUSPEND_PE,
+  /* Added in 2.0. */
+  XML_ERROR_RESERVED_PREFIX_XML,
+  XML_ERROR_RESERVED_PREFIX_XMLNS,
+  XML_ERROR_RESERVED_NAMESPACE_URI
 };
 
 enum XML_Content_Type {
@@ -205,8 +213,8 @@ XML_ParserCreate(const XML_Char *encoding);
    URI, the namespace separator character, and the local part of the
    name.  If the namespace separator is '\0' then the namespace URI
    and the local part will be concatenated without any separator.
-   When a namespace is not declared, the name and prefix will be
-   passed through without expansion.
+   It is a programming error to use the separator '\0' with namespace
+   triplets (see XML_SetReturnNSTriplet).
 */
 XMLPARSEAPI(XML_Parser)
 XML_ParserCreateNS(const XML_Char *encoding, XML_Char namespaceSeparator);
@@ -897,9 +905,9 @@ XML_GetErrorCode(XML_Parser parser);
    was detected; otherwise the location is the location of the last
    parse event, as described above.
 */
-XMLPARSEAPI(int) XML_GetCurrentLineNumber(XML_Parser parser);
-XMLPARSEAPI(int) XML_GetCurrentColumnNumber(XML_Parser parser);
-XMLPARSEAPI(long) XML_GetCurrentByteIndex(XML_Parser parser);
+XMLPARSEAPI(XML_Size) XML_GetCurrentLineNumber(XML_Parser parser);
+XMLPARSEAPI(XML_Size) XML_GetCurrentColumnNumber(XML_Parser parser);
+XMLPARSEAPI(XML_Index) XML_GetCurrentByteIndex(XML_Parser parser);
 
 /* Return the number of bytes in the current event.
    Returns 0 if the event is in an internal entity.
@@ -974,7 +982,8 @@ enum XML_FeatureEnum {
   XML_FEATURE_CONTEXT_BYTES,
   XML_FEATURE_MIN_SIZE,
   XML_FEATURE_SIZEOF_XML_CHAR,
-  XML_FEATURE_SIZEOF_XML_LCHAR
+  XML_FEATURE_SIZEOF_XML_LCHAR,
+  XML_FEATURE_NS
   /* Additional features must be added to the end of this enum. */
 };
 
@@ -993,12 +1002,12 @@ XML_GetFeatureList(void);
    releases. Micro is bumped with each release, and set to 0 with each
    change to major or minor version.
 */
-#define XML_MAJOR_VERSION 1
-#define XML_MINOR_VERSION 95
-#define XML_MICRO_VERSION 8
+#define XML_MAJOR_VERSION 2
+#define XML_MINOR_VERSION 0
+#define XML_MICRO_VERSION 0
 
 #ifdef __cplusplus
 }
 #endif
 
-#endif /* not XmlParse_INCLUDED */
+#endif /* not Expat_INCLUDED */
diff --git a/Modules/expat/expat_external.h b/Modules/expat/expat_external.h
index 4145cac..f054014 100644
--- a/Modules/expat/expat_external.h
+++ b/Modules/expat/expat_external.h
@@ -2,8 +2,15 @@
    See the file COPYING for copying permission.
 */
 
+#ifndef Expat_External_INCLUDED
+#define Expat_External_INCLUDED 1
+
 /* External API definitions */
 
+/* Namespace external symbols to allow multiple libexpat version to
+   co-exist. */
+#include "pyexpatns.h"
+
 #if defined(_MSC_EXTENSIONS) && !defined(__BEOS__) && !defined(__CYGWIN__)
 #define XML_USE_MSC_EXTENSIONS 1
 #endif
@@ -62,6 +69,7 @@
 #endif
 #endif  /* not defined XML_STATIC */
 
+
 /* If we didn't define it above, define it away: */
 #ifndef XMLIMPORT
 #define XMLIMPORT
@@ -90,3 +98,22 @@ typedef char XML_LChar;
 typedef char XML_Char;
 typedef char XML_LChar;
 #endif /* XML_UNICODE */
+
+#ifdef XML_LARGE_SIZE  /* Use large integers for file/stream positions. */
+#if defined(XML_USE_MSC_EXTENSIONS) && _MSC_VER < 1400
+typedef __int64 XML_Index; 
+typedef unsigned __int64 XML_Size;
+#else
+typedef long long XML_Index;
+typedef unsigned long long XML_Size;
+#endif
+#else
+typedef long XML_Index;
+typedef unsigned long XML_Size;
+#endif /* XML_LARGE_SIZE */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* not Expat_External_INCLUDED */
diff --git a/Modules/expat/pyexpatns.h b/Modules/expat/pyexpatns.h
new file mode 100644
index 0000000..7fbd341
--- /dev/null
+++ b/Modules/expat/pyexpatns.h
@@ -0,0 +1,124 @@
+/* Copyright (c) 2005-2006 ActiveState Software Inc.
+ *
+ * Namespace all expat exported symbols to avoid dynamic loading symbol
+ * collisions when embedding Python.
+ *
+ * The Problem:
+ * - you embed Python in some app
+ * - the app dynamically loads libexpat of version X
+ * - the embedded Python imports pyexpat (which was built against
+ *   libexpat version X+n)
+ * --> pyexpat gets the expat symbols from the already loaded and *older*
+ *     libexpat: crash (Specifically the crash we observed was in
+ *     getting an old XML_ErrorString (from xmlparse.c) and then calling
+ *     it with newer values in the XML_Error enum:
+ *
+ *       // pyexpat.c, line 1970
+ *       ...
+ *       // Added in Expat 1.95.7.
+ *       MYCONST(XML_ERROR_UNBOUND_PREFIX);
+ *       ...
+ *
+ *
+ * The Solution:
+ * Prefix all a exported symbols with "PyExpat_". This is similar to
+ * what Mozilla does for some common libs:
+ * http://lxr.mozilla.org/seamonkey/source/modules/libimg/png/mozpngconf.h#115
+ *
+ * The list of relevant exported symbols can be had with this command:
+ * 
+       nm pyexpat.so \
+           | grep -v " [a-zBUA] " \
+           | grep -v "_fini\|_init\|initpyexpat"
+ *
+ * If any of those symbols are NOT prefixed with "PyExpat_" then
+ * a #define should be added for it here.
+ */
+
+#ifndef PYEXPATNS_H
+#define PYEXPATNS_H
+
+#define XML_DefaultCurrent              PyExpat_XML_DefaultCurrent
+#define XML_ErrorString                 PyExpat_XML_ErrorString
+#define XML_ExpatVersion                PyExpat_XML_ExpatVersion
+#define XML_ExpatVersionInfo            PyExpat_XML_ExpatVersionInfo
+#define XML_ExternalEntityParserCreate  PyExpat_XML_ExternalEntityParserCreate
+#define XML_FreeContentModel            PyExpat_XML_FreeContentModel
+#define XML_GetBase                     PyExpat_XML_GetBase
+#define XML_GetBuffer                   PyExpat_XML_GetBuffer
+#define XML_GetCurrentByteCount         PyExpat_XML_GetCurrentByteCount
+#define XML_GetCurrentByteIndex         PyExpat_XML_GetCurrentByteIndex
+#define XML_GetCurrentColumnNumber      PyExpat_XML_GetCurrentColumnNumber
+#define XML_GetCurrentLineNumber        PyExpat_XML_GetCurrentLineNumber
+#define XML_GetErrorCode                PyExpat_XML_GetErrorCode
+#define XML_GetFeatureList              PyExpat_XML_GetFeatureList
+#define XML_GetIdAttributeIndex         PyExpat_XML_GetIdAttributeIndex
+#define XML_GetInputContext             PyExpat_XML_GetInputContext
+#define XML_GetParsingStatus            PyExpat_XML_GetParsingStatus
+#define XML_GetSpecifiedAttributeCount  PyExpat_XML_GetSpecifiedAttributeCount
+#define XmlGetUtf16InternalEncoding     PyExpat_XmlGetUtf16InternalEncoding
+#define XmlGetUtf16InternalEncodingNS   PyExpat_XmlGetUtf16InternalEncodingNS
+#define XmlGetUtf8InternalEncoding      PyExpat_XmlGetUtf8InternalEncoding
+#define XmlGetUtf8InternalEncodingNS    PyExpat_XmlGetUtf8InternalEncodingNS
+#define XmlInitEncoding                 PyExpat_XmlInitEncoding
+#define XmlInitEncodingNS               PyExpat_XmlInitEncodingNS
+#define XmlInitUnknownEncoding          PyExpat_XmlInitUnknownEncoding
+#define XmlInitUnknownEncodingNS        PyExpat_XmlInitUnknownEncodingNS
+#define XML_MemFree                     PyExpat_XML_MemFree
+#define XML_MemMalloc                   PyExpat_XML_MemMalloc
+#define XML_MemRealloc                  PyExpat_XML_MemRealloc
+#define XML_Parse                       PyExpat_XML_Parse
+#define XML_ParseBuffer                 PyExpat_XML_ParseBuffer
+#define XML_ParserCreate                PyExpat_XML_ParserCreate
+#define XML_ParserCreate_MM             PyExpat_XML_ParserCreate_MM
+#define XML_ParserCreateNS              PyExpat_XML_ParserCreateNS
+#define XML_ParserFree                  PyExpat_XML_ParserFree
+#define XML_ParserReset                 PyExpat_XML_ParserReset
+#define XmlParseXmlDecl                 PyExpat_XmlParseXmlDecl
+#define XmlParseXmlDeclNS               PyExpat_XmlParseXmlDeclNS
+#define XmlPrologStateInit              PyExpat_XmlPrologStateInit
+#define XmlPrologStateInitExternalEntity    PyExpat_XmlPrologStateInitExternalEntity
+#define XML_ResumeParser                PyExpat_XML_ResumeParser
+#define XML_SetAttlistDeclHandler       PyExpat_XML_SetAttlistDeclHandler
+#define XML_SetBase                     PyExpat_XML_SetBase
+#define XML_SetCdataSectionHandler      PyExpat_XML_SetCdataSectionHandler
+#define XML_SetCharacterDataHandler     PyExpat_XML_SetCharacterDataHandler
+#define XML_SetCommentHandler           PyExpat_XML_SetCommentHandler
+#define XML_SetDefaultHandler           PyExpat_XML_SetDefaultHandler
+#define XML_SetDefaultHandlerExpand     PyExpat_XML_SetDefaultHandlerExpand
+#define XML_SetDoctypeDeclHandler       PyExpat_XML_SetDoctypeDeclHandler
+#define XML_SetElementDeclHandler       PyExpat_XML_SetElementDeclHandler
+#define XML_SetElementHandler           PyExpat_XML_SetElementHandler
+#define XML_SetEncoding                 PyExpat_XML_SetEncoding
+#define XML_SetEndCdataSectionHandler   PyExpat_XML_SetEndCdataSectionHandler
+#define XML_SetEndDoctypeDeclHandler    PyExpat_XML_SetEndDoctypeDeclHandler
+#define XML_SetEndElementHandler        PyExpat_XML_SetEndElementHandler
+#define XML_SetEndNamespaceDeclHandler  PyExpat_XML_SetEndNamespaceDeclHandler
+#define XML_SetEntityDeclHandler        PyExpat_XML_SetEntityDeclHandler
+#define XML_SetExternalEntityRefHandler PyExpat_XML_SetExternalEntityRefHandler
+#define XML_SetExternalEntityRefHandlerArg  PyExpat_XML_SetExternalEntityRefHandlerArg
+#define XML_SetNamespaceDeclHandler     PyExpat_XML_SetNamespaceDeclHandler
+#define XML_SetNotationDeclHandler      PyExpat_XML_SetNotationDeclHandler
+#define XML_SetNotStandaloneHandler     PyExpat_XML_SetNotStandaloneHandler
+#define XML_SetParamEntityParsing       PyExpat_XML_SetParamEntityParsing
+#define XML_SetProcessingInstructionHandler PyExpat_XML_SetProcessingInstructionHandler
+#define XML_SetReturnNSTriplet          PyExpat_XML_SetReturnNSTriplet
+#define XML_SetSkippedEntityHandler     PyExpat_XML_SetSkippedEntityHandler
+#define XML_SetStartCdataSectionHandler PyExpat_XML_SetStartCdataSectionHandler
+#define XML_SetStartDoctypeDeclHandler  PyExpat_XML_SetStartDoctypeDeclHandler
+#define XML_SetStartElementHandler      PyExpat_XML_SetStartElementHandler
+#define XML_SetStartNamespaceDeclHandler    PyExpat_XML_SetStartNamespaceDeclHandler
+#define XML_SetUnknownEncodingHandler   PyExpat_XML_SetUnknownEncodingHandler
+#define XML_SetUnparsedEntityDeclHandler    PyExpat_XML_SetUnparsedEntityDeclHandler
+#define XML_SetUserData                 PyExpat_XML_SetUserData
+#define XML_SetXmlDeclHandler           PyExpat_XML_SetXmlDeclHandler
+#define XmlSizeOfUnknownEncoding        PyExpat_XmlSizeOfUnknownEncoding
+#define XML_StopParser                  PyExpat_XML_StopParser
+#define XML_UseForeignDTD               PyExpat_XML_UseForeignDTD
+#define XML_UseParserAsHandlerArg       PyExpat_XML_UseParserAsHandlerArg
+#define XmlUtf16Encode                  PyExpat_XmlUtf16Encode
+#define XmlUtf8Encode                   PyExpat_XmlUtf8Encode
+
+
+#endif /* !PYEXPATNS_H */
+
diff --git a/Modules/expat/xmlparse.c b/Modules/expat/xmlparse.c
index 42d95b7..882470d 100644
--- a/Modules/expat/xmlparse.c
+++ b/Modules/expat/xmlparse.c
@@ -8,6 +8,8 @@
 #include "winconfig.h"
 #elif defined(MACOS_CLASSIC)
 #include "macconfig.h"
+#elif defined(__amigaos4__)
+#include "amigaconfig.h"
 #elif defined(HAVE_EXPAT_CONFIG_H)
 #include <expat_config.h>
 #endif /* ndef COMPILED_FROM_DSP */
@@ -456,7 +458,7 @@ struct XML_ParserStruct {
   char *m_bufferEnd;
   /* allocated end of buffer */
   const char *m_bufferLim;
-  long m_parseEndByteIndex;
+  XML_Index m_parseEndByteIndex;
   const char *m_parseEndPtr;
   XML_Char *m_dataBuf;
   XML_Char *m_dataBufEnd;
@@ -640,8 +642,8 @@ struct XML_ParserStruct {
 #define groupSize (parser->m_groupSize)
 #define namespaceSeparator (parser->m_namespaceSeparator)
 #define parentParser (parser->m_parentParser)
-#define parsing (parser->m_parsingStatus.parsing)
-#define finalBuffer (parser->m_parsingStatus.finalBuffer)
+#define ps_parsing (parser->m_parsingStatus.parsing)
+#define ps_finalBuffer (parser->m_parsingStatus.finalBuffer)
 #ifdef XML_DTD
 #define isParamEntity (parser->m_isParamEntity)
 #define useForeignDTD (parser->m_useForeignDTD)
@@ -852,7 +854,7 @@ parserInit(XML_Parser parser, const XML_Char *encodingName)
   unknownEncodingRelease = NULL;
   unknownEncodingData = NULL;
   parentParser = NULL;
-  parsing = XML_INITIALIZED;
+  ps_parsing = XML_INITIALIZED;
 #ifdef XML_DTD
   isParamEntity = XML_FALSE;
   useForeignDTD = XML_FALSE;
@@ -915,7 +917,7 @@ XML_SetEncoding(XML_Parser parser, const XML_Char *encodingName)
      XXX There's no way for the caller to determine which of the
      XXX possible error cases caused the XML_STATUS_ERROR return.
   */
-  if (parsing == XML_PARSING || parsing == XML_SUSPENDED)
+  if (ps_parsing == XML_PARSING || ps_parsing == XML_SUSPENDED)
     return XML_STATUS_ERROR;
   if (encodingName == NULL)
     protocolEncodingName = NULL;
@@ -1143,7 +1145,7 @@ XML_UseForeignDTD(XML_Parser parser, XML_Bool useDTD)
 {
 #ifdef XML_DTD
   /* block after XML_Parse()/XML_ParseBuffer() has been called */
-  if (parsing == XML_PARSING || parsing == XML_SUSPENDED)
+  if (ps_parsing == XML_PARSING || ps_parsing == XML_SUSPENDED)
     return XML_ERROR_CANT_CHANGE_FEATURE_ONCE_PARSING;
   useForeignDTD = useDTD;
   return XML_ERROR_NONE;
@@ -1156,7 +1158,7 @@ void XMLCALL
 XML_SetReturnNSTriplet(XML_Parser parser, int do_nst)
 {
   /* block after XML_Parse()/XML_ParseBuffer() has been called */
-  if (parsing == XML_PARSING || parsing == XML_SUSPENDED)
+  if (ps_parsing == XML_PARSING || ps_parsing == XML_SUSPENDED)
     return;
   ns_triplets = do_nst ? XML_TRUE : XML_FALSE;
 }
@@ -1408,7 +1410,7 @@ XML_SetParamEntityParsing(XML_Parser parser,
                           enum XML_ParamEntityParsing peParsing)
 {
   /* block after XML_Parse()/XML_ParseBuffer() has been called */
-  if (parsing == XML_PARSING || parsing == XML_SUSPENDED)
+  if (ps_parsing == XML_PARSING || ps_parsing == XML_SUSPENDED)
     return 0;
 #ifdef XML_DTD
   paramEntityParsing = peParsing;
@@ -1421,7 +1423,7 @@ XML_SetParamEntityParsing(XML_Parser parser,
 enum XML_Status XMLCALL
 XML_Parse(XML_Parser parser, const char *s, int len, int isFinal)
 {
-  switch (parsing) {
+  switch (ps_parsing) {
   case XML_SUSPENDED:
     errorCode = XML_ERROR_SUSPENDED;
     return XML_STATUS_ERROR;
@@ -1429,11 +1431,11 @@ XML_Parse(XML_Parser parser, const char *s, int len, int isFinal)
     errorCode = XML_ERROR_FINISHED;
     return XML_STATUS_ERROR;
   default:
-    parsing = XML_PARSING;
+    ps_parsing = XML_PARSING;
   }
 
   if (len == 0) {
-    finalBuffer = (XML_Bool)isFinal;
+    ps_finalBuffer = (XML_Bool)isFinal;
     if (!isFinal)
       return XML_STATUS_OK;
     positionPtr = bufferPtr;
@@ -1441,19 +1443,19 @@ XML_Parse(XML_Parser parser, const char *s, int len, int isFinal)
 
     /* If data are left over from last buffer, and we now know that these
        data are the final chunk of input, then we have to check them again
-       to detect errors based on this information.
+       to detect errors based on that fact.
     */
     errorCode = processor(parser, bufferPtr, parseEndPtr, &bufferPtr);
 
     if (errorCode == XML_ERROR_NONE) {
-      switch (parsing) {
+      switch (ps_parsing) {
       case XML_SUSPENDED:
         XmlUpdatePosition(encoding, positionPtr, bufferPtr, &position);
         positionPtr = bufferPtr;
         return XML_STATUS_SUSPENDED;
       case XML_INITIALIZED: 
       case XML_PARSING:
-        parsing = XML_FINISHED;
+        ps_parsing = XML_FINISHED;
         /* fall through */
       default:
         return XML_STATUS_OK;
@@ -1470,7 +1472,7 @@ XML_Parse(XML_Parser parser, const char *s, int len, int isFinal)
     enum XML_Error result;
     parseEndByteIndex += len;
     positionPtr = s;
-    finalBuffer = (XML_Bool)isFinal;
+    ps_finalBuffer = (XML_Bool)isFinal;
 
     errorCode = processor(parser, s, parseEndPtr = s + len, &end);
 
@@ -1480,7 +1482,7 @@ XML_Parse(XML_Parser parser, const char *s, int len, int isFinal)
       return XML_STATUS_ERROR;
     }
     else {
-      switch (parsing) {
+      switch (ps_parsing) {
       case XML_SUSPENDED:
         result = XML_STATUS_SUSPENDED;
         break;
@@ -1488,14 +1490,13 @@ XML_Parse(XML_Parser parser, const char *s, int len, int isFinal)
       case XML_PARSING:
         result = XML_STATUS_OK;
         if (isFinal) {
-          parsing = XML_FINISHED;
+          ps_parsing = XML_FINISHED;
           return result;
         }
       }
     }
 
     XmlUpdatePosition(encoding, positionPtr, end, &position);
-    positionPtr = end;
     nLeftOver = s + len - end;
     if (nLeftOver) {
       if (buffer == NULL || nLeftOver > bufferLim - buffer) {
@@ -1518,9 +1519,13 @@ XML_Parse(XML_Parser parser, const char *s, int len, int isFinal)
         bufferLim = buffer + len * 2;
       }
       memcpy(buffer, end, nLeftOver);
-      bufferPtr = buffer;
-      bufferEnd = buffer + nLeftOver;
     }
+    bufferPtr = buffer;
+    bufferEnd = buffer + nLeftOver;
+    positionPtr = bufferPtr;
+    parseEndPtr = bufferEnd;
+    eventPtr = bufferPtr;
+    eventEndPtr = bufferPtr;
     return result;
   }
 #endif  /* not defined XML_CONTEXT_BYTES */
@@ -1541,7 +1546,7 @@ XML_ParseBuffer(XML_Parser parser, int len, int isFinal)
   const char *start;
   enum XML_Status result = XML_STATUS_OK;
 
-  switch (parsing) {
+  switch (ps_parsing) {
   case XML_SUSPENDED:
     errorCode = XML_ERROR_SUSPENDED;
     return XML_STATUS_ERROR;
@@ -1549,7 +1554,7 @@ XML_ParseBuffer(XML_Parser parser, int len, int isFinal)
     errorCode = XML_ERROR_FINISHED;
     return XML_STATUS_ERROR;
   default:
-    parsing = XML_PARSING;
+    ps_parsing = XML_PARSING;
   }
 
   start = bufferPtr;
@@ -1557,7 +1562,7 @@ XML_ParseBuffer(XML_Parser parser, int len, int isFinal)
   bufferEnd += len;
   parseEndPtr = bufferEnd;
   parseEndByteIndex += len;
-  finalBuffer = (XML_Bool)isFinal;
+  ps_finalBuffer = (XML_Bool)isFinal;
 
   errorCode = processor(parser, start, parseEndPtr, &bufferPtr);
 
@@ -1567,14 +1572,14 @@ XML_ParseBuffer(XML_Parser parser, int len, int isFinal)
     return XML_STATUS_ERROR;
   }
   else {
-    switch (parsing) {
+    switch (ps_parsing) {
     case XML_SUSPENDED:
       result = XML_STATUS_SUSPENDED;
       break;
     case XML_INITIALIZED: 
     case XML_PARSING:
       if (isFinal) {
-        parsing = XML_FINISHED;
+        ps_parsing = XML_FINISHED;
         return result;
       }
     default: ;  /* should not happen */
@@ -1589,7 +1594,7 @@ XML_ParseBuffer(XML_Parser parser, int len, int isFinal)
 void * XMLCALL
 XML_GetBuffer(XML_Parser parser, int len)
 {
-  switch (parsing) {
+  switch (ps_parsing) {
   case XML_SUSPENDED:
     errorCode = XML_ERROR_SUSPENDED;
     return NULL;
@@ -1601,9 +1606,9 @@ XML_GetBuffer(XML_Parser parser, int len)
 
   if (len > bufferLim - bufferEnd) {
     /* FIXME avoid integer overflow */
-    int neededSize = len + (bufferEnd - bufferPtr);
+    int neededSize = len + (int)(bufferEnd - bufferPtr);
 #ifdef XML_CONTEXT_BYTES
-    int keep = bufferPtr - buffer;
+    int keep = (int)(bufferPtr - buffer);
 
     if (keep > XML_CONTEXT_BYTES)
       keep = XML_CONTEXT_BYTES;
@@ -1612,7 +1617,7 @@ XML_GetBuffer(XML_Parser parser, int len)
     if (neededSize  <= bufferLim - buffer) {
 #ifdef XML_CONTEXT_BYTES
       if (keep < bufferPtr - buffer) {
-        int offset = (bufferPtr - buffer) - keep;
+        int offset = (int)(bufferPtr - buffer) - keep;
         memmove(buffer, &buffer[offset], bufferEnd - bufferPtr + keep);
         bufferEnd -= offset;
         bufferPtr -= offset;
@@ -1625,7 +1630,7 @@ XML_GetBuffer(XML_Parser parser, int len)
     }
     else {
       char *newBuf;
-      int bufferSize = bufferLim - bufferPtr;
+      int bufferSize = (int)(bufferLim - bufferPtr);
       if (bufferSize == 0)
         bufferSize = INIT_BUFFER_SIZE;
       do {
@@ -1639,7 +1644,7 @@ XML_GetBuffer(XML_Parser parser, int len)
       bufferLim = newBuf + bufferSize;
 #ifdef XML_CONTEXT_BYTES
       if (bufferPtr) {
-        int keep = bufferPtr - buffer;
+        int keep = (int)(bufferPtr - buffer);
         if (keep > XML_CONTEXT_BYTES)
           keep = XML_CONTEXT_BYTES;
         memcpy(newBuf, &bufferPtr[-keep], bufferEnd - bufferPtr + keep);
@@ -1668,13 +1673,13 @@ XML_GetBuffer(XML_Parser parser, int len)
 enum XML_Status XMLCALL
 XML_StopParser(XML_Parser parser, XML_Bool resumable)
 {
-  switch (parsing) {
+  switch (ps_parsing) {
   case XML_SUSPENDED:
     if (resumable) {
       errorCode = XML_ERROR_SUSPENDED;
       return XML_STATUS_ERROR;
     }
-    parsing = XML_FINISHED;
+    ps_parsing = XML_FINISHED;
     break;
   case XML_FINISHED:
     errorCode = XML_ERROR_FINISHED;
@@ -1687,10 +1692,10 @@ XML_StopParser(XML_Parser parser, XML_Bool resumable)
         return XML_STATUS_ERROR;
       }
 #endif
-      parsing = XML_SUSPENDED;
+      ps_parsing = XML_SUSPENDED;
     }
     else
-      parsing = XML_FINISHED;
+      ps_parsing = XML_FINISHED;
   }
   return XML_STATUS_OK;
 }
@@ -1700,11 +1705,11 @@ XML_ResumeParser(XML_Parser parser)
 {
   enum XML_Status result = XML_STATUS_OK;
 
-  if (parsing != XML_SUSPENDED) {
+  if (ps_parsing != XML_SUSPENDED) {
     errorCode = XML_ERROR_NOT_SUSPENDED;
     return XML_STATUS_ERROR;
   }
-  parsing = XML_PARSING;
+  ps_parsing = XML_PARSING;
 
   errorCode = processor(parser, bufferPtr, parseEndPtr, &bufferPtr);
 
@@ -1714,14 +1719,14 @@ XML_ResumeParser(XML_Parser parser)
     return XML_STATUS_ERROR;
   }
   else {
-    switch (parsing) {
+    switch (ps_parsing) {
     case XML_SUSPENDED:
       result = XML_STATUS_SUSPENDED;
       break;
     case XML_INITIALIZED: 
     case XML_PARSING:
-      if (finalBuffer) {
-        parsing = XML_FINISHED;
+      if (ps_finalBuffer) {
+        ps_parsing = XML_FINISHED;
         return result;
       }
     default: ;
@@ -1746,7 +1751,7 @@ XML_GetErrorCode(XML_Parser parser)
   return errorCode;
 }
 
-long XMLCALL
+XML_Index XMLCALL
 XML_GetCurrentByteIndex(XML_Parser parser)
 {
   if (eventPtr)
@@ -1758,7 +1763,7 @@ int XMLCALL
 XML_GetCurrentByteCount(XML_Parser parser)
 {
   if (eventEndPtr && eventPtr)
-    return eventEndPtr - eventPtr;
+    return (int)(eventEndPtr - eventPtr);
   return 0;
 }
 
@@ -1767,15 +1772,15 @@ XML_GetInputContext(XML_Parser parser, int *offset, int *size)
 {
 #ifdef XML_CONTEXT_BYTES
   if (eventPtr && buffer) {
-    *offset = eventPtr - buffer;
-    *size   = bufferEnd - buffer;
+    *offset = (int)(eventPtr - buffer);
+    *size   = (int)(bufferEnd - buffer);
     return buffer;
   }
 #endif /* defined XML_CONTEXT_BYTES */
   return (char *) 0;
 }
 
-int XMLCALL
+XML_Size XMLCALL
 XML_GetCurrentLineNumber(XML_Parser parser)
 {
   if (eventPtr && eventPtr >= positionPtr) {
@@ -1785,7 +1790,7 @@ XML_GetCurrentLineNumber(XML_Parser parser)
   return position.lineNumber + 1;
 }
 
-int XMLCALL
+XML_Size XMLCALL
 XML_GetCurrentColumnNumber(XML_Parser parser)
 {
   if (eventPtr && eventPtr >= positionPtr) {
@@ -1836,7 +1841,7 @@ XML_DefaultCurrent(XML_Parser parser)
 const XML_LChar * XMLCALL
 XML_ErrorString(enum XML_Error code)
 {
-  static const XML_LChar *message[] = {
+  static const XML_LChar* const message[] = {
     0,
     XML_L("out of memory"),
     XML_L("syntax error"),
@@ -1854,7 +1859,7 @@ XML_ErrorString(enum XML_Error code)
     XML_L("reference to invalid character number"),
     XML_L("reference to binary entity"),
     XML_L("reference to external entity in attribute"),
-    XML_L("xml declaration not at start of external entity"),
+    XML_L("XML or text declaration not at start of entity"),
     XML_L("unknown encoding"),
     XML_L("encoding specified in XML declaration is incorrect"),
     XML_L("unclosed CDATA section"),
@@ -1874,7 +1879,10 @@ XML_ErrorString(enum XML_Error code)
     XML_L("parser not suspended"),
     XML_L("parsing aborted"),
     XML_L("parsing finished"),
-    XML_L("cannot suspend in external parameter entity")
+    XML_L("cannot suspend in external parameter entity"),
+    XML_L("reserved prefix (xml) must not be undeclared or bound to another namespace name"),
+    XML_L("reserved prefix (xmlns) must not be declared or undeclared"),
+    XML_L("prefix must not be bound to one of the reserved namespace names")
   };
   if (code > 0 && code < sizeof(message)/sizeof(message[0]))
     return message[code];
@@ -1916,9 +1924,11 @@ XML_ExpatVersionInfo(void)
 const XML_Feature * XMLCALL
 XML_GetFeatureList(void)
 {
-  static XML_Feature features[] = {
-    {XML_FEATURE_SIZEOF_XML_CHAR,  XML_L("sizeof(XML_Char)"), 0},
-    {XML_FEATURE_SIZEOF_XML_LCHAR, XML_L("sizeof(XML_LChar)"), 0},
+  static const XML_Feature features[] = {
+    {XML_FEATURE_SIZEOF_XML_CHAR,  XML_L("sizeof(XML_Char)"),
+     sizeof(XML_Char)},
+    {XML_FEATURE_SIZEOF_XML_LCHAR, XML_L("sizeof(XML_LChar)"),
+     sizeof(XML_LChar)},
 #ifdef XML_UNICODE
     {XML_FEATURE_UNICODE,          XML_L("XML_UNICODE"), 0},
 #endif
@@ -1935,11 +1945,12 @@ XML_GetFeatureList(void)
 #ifdef XML_MIN_SIZE
     {XML_FEATURE_MIN_SIZE,         XML_L("XML_MIN_SIZE"), 0},
 #endif
+#ifdef XML_NS
+    {XML_FEATURE_NS,               XML_L("XML_NS"), 0},
+#endif
     {XML_FEATURE_END,              NULL, 0}
   };
 
-  features[0].value = sizeof(XML_Char);
-  features[1].value = sizeof(XML_LChar);
   return features;
 }
 
@@ -2000,7 +2011,7 @@ contentProcessor(XML_Parser parser,
                  const char **endPtr)
 {
   enum XML_Error result = doContent(parser, 0, encoding, start, end, 
-                                    endPtr, (XML_Bool)!finalBuffer);
+                                    endPtr, (XML_Bool)!ps_finalBuffer);
   if (result == XML_ERROR_NONE) {
     if (!storeRawNames(parser))
       return XML_ERROR_NO_MEMORY;
@@ -2036,21 +2047,21 @@ externalEntityInitProcessor2(XML_Parser parser,
        doContent (by detecting XML_TOK_NONE) without processing any xml text
        declaration - causing the error XML_ERROR_MISPLACED_XML_PI in doContent.
     */
-    if (next == end && !finalBuffer) {
+    if (next == end && !ps_finalBuffer) {
       *endPtr = next;
       return XML_ERROR_NONE;
     }
     start = next;
     break;
   case XML_TOK_PARTIAL:
-    if (!finalBuffer) {
+    if (!ps_finalBuffer) {
       *endPtr = start;
       return XML_ERROR_NONE;
     }
     eventPtr = start;
     return XML_ERROR_UNCLOSED_TOKEN;
   case XML_TOK_PARTIAL_CHAR:
-    if (!finalBuffer) {
+    if (!ps_finalBuffer) {
       *endPtr = start;
       return XML_ERROR_NONE;
     }
@@ -2080,7 +2091,7 @@ externalEntityInitProcessor3(XML_Parser parser,
       result = processXmlDecl(parser, 1, start, next);
       if (result != XML_ERROR_NONE)
         return result;
-      switch (parsing) {
+      switch (ps_parsing) {
       case XML_SUSPENDED: 
         *endPtr = next;
         return XML_ERROR_NONE;
@@ -2092,13 +2103,13 @@ externalEntityInitProcessor3(XML_Parser parser,
     }
     break;
   case XML_TOK_PARTIAL:
-    if (!finalBuffer) {
+    if (!ps_finalBuffer) {
       *endPtr = start;
       return XML_ERROR_NONE;
     }
     return XML_ERROR_UNCLOSED_TOKEN;
   case XML_TOK_PARTIAL_CHAR:
-    if (!finalBuffer) {
+    if (!ps_finalBuffer) {
       *endPtr = start;
       return XML_ERROR_NONE;
     }
@@ -2116,7 +2127,7 @@ externalEntityContentProcessor(XML_Parser parser,
                                const char **endPtr)
 {
   enum XML_Error result = doContent(parser, 1, encoding, start, end, 
-                                    endPtr, (XML_Bool)!finalBuffer);
+                                    endPtr, (XML_Bool)!ps_finalBuffer);
   if (result == XML_ERROR_NONE) {
     if (!storeRawNames(parser))
       return XML_ERROR_NO_MEMORY;
@@ -2315,12 +2326,12 @@ doContent(XML_Parser parser,
             XmlConvert(enc,
                        &fromPtr, rawNameEnd,
                        (ICHAR **)&toPtr, (ICHAR *)tag->bufEnd - 1);
-            convLen = toPtr - (XML_Char *)tag->buf;
+            convLen = (int)(toPtr - (XML_Char *)tag->buf);
             if (fromPtr == rawNameEnd) {
               tag->name.strLen = convLen;
               break;
             }
-            bufSize = (tag->bufEnd - tag->buf) << 1;
+            bufSize = (int)(tag->bufEnd - tag->buf) << 1;
             {
               char *temp = (char *)REALLOC(tag->buf, bufSize);
               if (temp == NULL)
@@ -2508,12 +2519,12 @@ doContent(XML_Parser parser,
           ICHAR *dataPtr = (ICHAR *)dataBuf;
           XmlConvert(enc, &s, end, &dataPtr, (ICHAR *)dataBufEnd);
           characterDataHandler(handlerArg, dataBuf,
-                               dataPtr - (ICHAR *)dataBuf);
+                               (int)(dataPtr - (ICHAR *)dataBuf));
         }
         else
           characterDataHandler(handlerArg,
                                (XML_Char *)s,
-                               (XML_Char *)end - (XML_Char *)s);
+                               (int)((XML_Char *)end - (XML_Char *)s));
       }
       else if (defaultHandler)
         reportDefault(parser, enc, s, end);
@@ -2538,7 +2549,7 @@ doContent(XML_Parser parser,
             XmlConvert(enc, &s, next, &dataPtr, (ICHAR *)dataBufEnd);
             *eventEndPP = s;
             characterDataHandler(handlerArg, dataBuf,
-                                 dataPtr - (ICHAR *)dataBuf);
+                                 (int)(dataPtr - (ICHAR *)dataBuf));
             if (s == next)
               break;
             *eventPP = s;
@@ -2547,7 +2558,7 @@ doContent(XML_Parser parser,
         else
           characterDataHandler(handlerArg,
                                (XML_Char *)s,
-                               (XML_Char *)next - (XML_Char *)s);
+                               (int)((XML_Char *)next - (XML_Char *)s));
       }
       else if (defaultHandler)
         reportDefault(parser, enc, s, next);
@@ -2566,7 +2577,7 @@ doContent(XML_Parser parser,
       break;
     }
     *eventPP = s = next;
-    switch (parsing) {
+    switch (ps_parsing) {
     case XML_SUSPENDED: 
       *nextPtr = next;
       return XML_ERROR_NONE;
@@ -2822,7 +2833,7 @@ storeAtts(XML_Parser parser, const ENCODING *enc,
             }
             if (!step)
               step = PROBE_STEP(uriHash, mask, nsAttsPower);
-            j < step ? ( j += nsAttsSize - step) : (j -= step);
+            j < step ? (j += nsAttsSize - step) : (j -= step);
           }
         }
 
@@ -2845,8 +2856,10 @@ storeAtts(XML_Parser parser, const ENCODING *enc,
         nsAtts[j].hash = uriHash;
         nsAtts[j].uriName = s;
 
-        if (!--nPrefixes)
+        if (!--nPrefixes) {
+          i += 2;
           break;
+        }
       }
       else  /* not prefixed */
         ((XML_Char *)s)[-1] = 0;  /* clear flag */
@@ -2879,14 +2892,14 @@ storeAtts(XML_Parser parser, const ENCODING *enc,
   prefixLen = 0;
   if (ns_triplets && binding->prefix->name) {
     for (; binding->prefix->name[prefixLen++];)
-      ;
+      ;  /* prefixLen includes null terminator */
   }
   tagNamePtr->localPart = localPart;
   tagNamePtr->uriLen = binding->uriLen;
   tagNamePtr->prefix = binding->prefix->name;
   tagNamePtr->prefixLen = prefixLen;
   for (i = 0; localPart[i++];)
-    ;
+    ;  /* i includes null terminator */
   n = i + binding->uriLen + prefixLen;
   if (n > binding->uriAlloc) {
     TAG *p;
@@ -2901,12 +2914,13 @@ storeAtts(XML_Parser parser, const ENCODING *enc,
     FREE(binding->uri);
     binding->uri = uri;
   }
+  /* if namespaceSeparator != '\0' then uri includes it already */
   uri = binding->uri + binding->uriLen;
   memcpy(uri, localPart, i * sizeof(XML_Char));
+  /* we always have a namespace separator between localPart and prefix */
   if (prefixLen) {
-    uri = uri + (i - 1);
-    if (namespaceSeparator)
-      *uri = namespaceSeparator;
+    uri += i - 1;
+    *uri = namespaceSeparator;  /* replace null terminator */
     memcpy(uri + 1, binding->prefix->name, prefixLen * sizeof(XML_Char));
   }
   tagNamePtr->str = binding->uri;
@@ -2920,6 +2934,26 @@ static enum XML_Error
 addBinding(XML_Parser parser, PREFIX *prefix, const ATTRIBUTE_ID *attId,
            const XML_Char *uri, BINDING **bindingsPtr)
 {
+  static const XML_Char xmlNamespace[] = {
+    'h', 't', 't', 'p', ':', '/', '/',
+    'w', 'w', 'w', '.', 'w', '3', '.', 'o', 'r', 'g', '/',
+    'X', 'M', 'L', '/', '1', '9', '9', '8', '/',
+    'n', 'a', 'm', 'e', 's', 'p', 'a', 'c', 'e', '\0'
+  };
+  static const int xmlLen = 
+    (int)sizeof(xmlNamespace)/sizeof(XML_Char) - 1;
+  static const XML_Char xmlnsNamespace[] = {
+    'h', 't', 't', 'p', ':', '/', '/',
+    'w', 'w', 'w', '.', 'w', '3', '.', 'o', 'r', 'g', '/',
+    '2', '0', '0', '0', '/', 'x', 'm', 'l', 'n', 's', '/', '\0'
+  };
+  static const int xmlnsLen = 
+    (int)sizeof(xmlnsNamespace)/sizeof(XML_Char) - 1;
+
+  XML_Bool mustBeXML = XML_FALSE;
+  XML_Bool isXML = XML_TRUE;
+  XML_Bool isXMLNS = XML_TRUE;
+  
   BINDING *b;
   int len;
 
@@ -2927,8 +2961,39 @@ addBinding(XML_Parser parser, PREFIX *prefix, const ATTRIBUTE_ID *attId,
   if (*uri == XML_T('\0') && prefix->name)
     return XML_ERROR_UNDECLARING_PREFIX;
 
-  for (len = 0; uri[len]; len++)
-    ;
+  if (prefix->name
+      && prefix->name[0] == XML_T('x')
+      && prefix->name[1] == XML_T('m')
+      && prefix->name[2] == XML_T('l')) {
+
+    /* Not allowed to bind xmlns */
+    if (prefix->name[3] == XML_T('n')
+        && prefix->name[4] == XML_T('s')
+        && prefix->name[5] == XML_T('\0'))
+      return XML_ERROR_RESERVED_PREFIX_XMLNS;
+
+    if (prefix->name[3] == XML_T('\0'))
+      mustBeXML = XML_TRUE;
+  }
+
+  for (len = 0; uri[len]; len++) {
+    if (isXML && (len > xmlLen || uri[len] != xmlNamespace[len]))
+      isXML = XML_FALSE;
+
+    if (!mustBeXML && isXMLNS 
+        && (len > xmlnsLen || uri[len] != xmlnsNamespace[len]))
+      isXMLNS = XML_FALSE;
+  }
+  isXML = isXML && len == xmlLen;
+  isXMLNS = isXMLNS && len == xmlnsLen;
+
+  if (mustBeXML != isXML)
+    return mustBeXML ? XML_ERROR_RESERVED_PREFIX_XML
+                     : XML_ERROR_RESERVED_NAMESPACE_URI;
+
+  if (isXMLNS)
+    return XML_ERROR_RESERVED_NAMESPACE_URI;
+
   if (namespaceSeparator)
     len++;
   if (freeBindingList) {
@@ -2985,7 +3050,7 @@ cdataSectionProcessor(XML_Parser parser,
                       const char **endPtr)
 {
   enum XML_Error result = doCdataSection(parser, encoding, &start, end,
-                                         endPtr, (XML_Bool)!finalBuffer);
+                                         endPtr, (XML_Bool)!ps_finalBuffer);
   if (result != XML_ERROR_NONE)
     return result;
   if (start) {
@@ -3044,7 +3109,7 @@ doCdataSection(XML_Parser parser,
         reportDefault(parser, enc, s, next);
       *startPtr = next;
       *nextPtr = next;
-      if (parsing == XML_FINISHED)
+      if (ps_parsing == XML_FINISHED)
         return XML_ERROR_ABORTED;
       else
         return XML_ERROR_NONE;
@@ -3064,7 +3129,7 @@ doCdataSection(XML_Parser parser,
             XmlConvert(enc, &s, next, &dataPtr, (ICHAR *)dataBufEnd);
             *eventEndPP = next;
             characterDataHandler(handlerArg, dataBuf,
-                                 dataPtr - (ICHAR *)dataBuf);
+                                 (int)(dataPtr - (ICHAR *)dataBuf));
             if (s == next)
               break;
             *eventPP = s;
@@ -3073,7 +3138,7 @@ doCdataSection(XML_Parser parser,
         else
           characterDataHandler(handlerArg,
                                (XML_Char *)s,
-                               (XML_Char *)next - (XML_Char *)s);
+                               (int)((XML_Char *)next - (XML_Char *)s));
       }
       else if (defaultHandler)
         reportDefault(parser, enc, s, next);
@@ -3100,7 +3165,7 @@ doCdataSection(XML_Parser parser,
     }
 
     *eventPP = s = next;
-    switch (parsing) {
+    switch (ps_parsing) {
     case XML_SUSPENDED:
       *nextPtr = next;
       return XML_ERROR_NONE;
@@ -3124,7 +3189,7 @@ ignoreSectionProcessor(XML_Parser parser,
                        const char **endPtr)
 {
   enum XML_Error result = doIgnoreSection(parser, encoding, &start, end, 
-                                          endPtr, (XML_Bool)!finalBuffer);
+                                          endPtr, (XML_Bool)!ps_finalBuffer);
   if (result != XML_ERROR_NONE)
     return result;
   if (start) {
@@ -3169,7 +3234,7 @@ doIgnoreSection(XML_Parser parser,
       reportDefault(parser, enc, s, next);
     *startPtr = next;
     *nextPtr = next;
-    if (parsing == XML_FINISHED)
+    if (ps_parsing == XML_FINISHED)
       return XML_ERROR_ABORTED;
     else
       return XML_ERROR_NONE;
@@ -3409,7 +3474,7 @@ entityValueInitProcessor(XML_Parser parser,
     tok = XmlPrologTok(encoding, start, end, &next);
     eventEndPtr = next;
     if (tok <= 0) {
-      if (!finalBuffer && tok != XML_TOK_INVALID) {
+      if (!ps_finalBuffer && tok != XML_TOK_INVALID) {
         *nextPtr = s;
         return XML_ERROR_NONE;
       }
@@ -3432,7 +3497,7 @@ entityValueInitProcessor(XML_Parser parser,
       result = processXmlDecl(parser, 0, start, next);
       if (result != XML_ERROR_NONE)
         return result;
-      switch (parsing) {
+      switch (ps_parsing) {
       case XML_SUSPENDED: 
         *nextPtr = next;
         return XML_ERROR_NONE;
@@ -3452,7 +3517,7 @@ entityValueInitProcessor(XML_Parser parser,
        then, when this routine is entered the next time, XmlPrologTok will
        return XML_TOK_INVALID, since the BOM is still in the buffer
     */
-    else if (tok == XML_TOK_BOM && next == end && !finalBuffer) {
+    else if (tok == XML_TOK_BOM && next == end && !ps_finalBuffer) {
       *nextPtr = next;
       return XML_ERROR_NONE;
     }
@@ -3472,7 +3537,7 @@ externalParEntProcessor(XML_Parser parser,
 
   tok = XmlPrologTok(encoding, s, end, &next);
   if (tok <= 0) {
-    if (!finalBuffer && tok != XML_TOK_INVALID) {
+    if (!ps_finalBuffer && tok != XML_TOK_INVALID) {
       *nextPtr = s;
       return XML_ERROR_NONE;
     }
@@ -3499,7 +3564,7 @@ externalParEntProcessor(XML_Parser parser,
 
   processor = prologProcessor;
   return doProlog(parser, encoding, s, end, tok, next, 
-                  nextPtr, (XML_Bool)!finalBuffer);
+                  nextPtr, (XML_Bool)!ps_finalBuffer);
 }
 
 static enum XML_Error PTRCALL
@@ -3516,7 +3581,7 @@ entityValueProcessor(XML_Parser parser,
   for (;;) {
     tok = XmlPrologTok(enc, start, end, &next);
     if (tok <= 0) {
-      if (!finalBuffer && tok != XML_TOK_INVALID) {
+      if (!ps_finalBuffer && tok != XML_TOK_INVALID) {
         *nextPtr = s;
         return XML_ERROR_NONE;
       }
@@ -3549,7 +3614,7 @@ prologProcessor(XML_Parser parser,
   const char *next = s;
   int tok = XmlPrologTok(encoding, s, end, &next);
   return doProlog(parser, encoding, s, end, tok, next, 
-                  nextPtr, (XML_Bool)!finalBuffer);
+                  nextPtr, (XML_Bool)!ps_finalBuffer);
 }
 
 static enum XML_Error
@@ -3738,7 +3803,8 @@ doProlog(XML_Parser parser,
       */
 #ifdef XML_DTD
       if (doctypeSysid || useForeignDTD) {
-        dtd->hasParamEntityRefs = XML_TRUE; /* when docTypeSysid == NULL */
+        XML_Bool hadParamEntityRefs = dtd->hasParamEntityRefs;
+        dtd->hasParamEntityRefs = XML_TRUE;
         if (paramEntityParsing && externalEntityRefHandler) {
           ENTITY *entity = (ENTITY *)lookup(&dtd->paramEntities,
                                             externalSubsetName,
@@ -3754,11 +3820,17 @@ doProlog(XML_Parser parser,
                                         entity->systemId,
                                         entity->publicId))
             return XML_ERROR_EXTERNAL_ENTITY_HANDLING;
-          if (dtd->paramEntityRead &&
-              !dtd->standalone &&
-              notStandaloneHandler &&
-              !notStandaloneHandler(handlerArg))
-            return XML_ERROR_NOT_STANDALONE;
+          if (dtd->paramEntityRead) {
+            if (!dtd->standalone && 
+                notStandaloneHandler && 
+                !notStandaloneHandler(handlerArg))
+              return XML_ERROR_NOT_STANDALONE;
+          }
+          /* if we didn't read the foreign DTD then this means that there
+             is no external subset and we must reset dtd->hasParamEntityRefs
+          */
+          else if (!doctypeSysid)
+            dtd->hasParamEntityRefs = hadParamEntityRefs;
           /* end of DTD - no need to update dtd->keepProcessing */
         }
         useForeignDTD = XML_FALSE;
@@ -3775,6 +3847,7 @@ doProlog(XML_Parser parser,
          last chance to read the foreign DTD
       */
       if (useForeignDTD) {
+        XML_Bool hadParamEntityRefs = dtd->hasParamEntityRefs;
         dtd->hasParamEntityRefs = XML_TRUE;
         if (paramEntityParsing && externalEntityRefHandler) {
           ENTITY *entity = (ENTITY *)lookup(&dtd->paramEntities,
@@ -3790,11 +3863,17 @@ doProlog(XML_Parser parser,
                                         entity->systemId,
                                         entity->publicId))
             return XML_ERROR_EXTERNAL_ENTITY_HANDLING;
-          if (dtd->paramEntityRead &&
-              !dtd->standalone &&
-              notStandaloneHandler &&
-              !notStandaloneHandler(handlerArg))
-            return XML_ERROR_NOT_STANDALONE;
+          if (dtd->paramEntityRead) {
+            if (!dtd->standalone &&
+                notStandaloneHandler &&
+                !notStandaloneHandler(handlerArg))
+              return XML_ERROR_NOT_STANDALONE;
+          }
+          /* if we didn't read the foreign DTD then this means that there
+             is no external subset and we must reset dtd->hasParamEntityRefs
+          */
+          else
+            dtd->hasParamEntityRefs = hadParamEntityRefs;
           /* end of DTD - no need to update dtd->keepProcessing */
         }
       }
@@ -3935,7 +4014,7 @@ doProlog(XML_Parser parser,
                                             next - enc->minBytesPerChar);
         if (declEntity) {
           declEntity->textPtr = poolStart(&dtd->entityValuePool);
-          declEntity->textLen = poolLength(&dtd->entityValuePool);
+          declEntity->textLen = (int)(poolLength(&dtd->entityValuePool));
           poolFinish(&dtd->entityValuePool);
           if (entityDeclHandler) {
             *eventEndPP = s;
@@ -4496,7 +4575,7 @@ doProlog(XML_Parser parser,
     if (handleDefault && defaultHandler)
       reportDefault(parser, enc, s, next);
 
-    switch (parsing) {
+    switch (ps_parsing) {
     case XML_SUSPENDED: 
       *nextPtr = next;
       return XML_ERROR_NONE;
@@ -4527,7 +4606,7 @@ epilogProcessor(XML_Parser parser,
     case -XML_TOK_PROLOG_S:
       if (defaultHandler) {
         reportDefault(parser, encoding, s, next);
-        if (parsing == XML_FINISHED)
+        if (ps_parsing == XML_FINISHED)
           return XML_ERROR_ABORTED;
       }
       *nextPtr = next;
@@ -4551,13 +4630,13 @@ epilogProcessor(XML_Parser parser,
       eventPtr = next;
       return XML_ERROR_INVALID_TOKEN;
     case XML_TOK_PARTIAL:
-      if (!finalBuffer) {
+      if (!ps_finalBuffer) {
         *nextPtr = s;
         return XML_ERROR_NONE;
       }
       return XML_ERROR_UNCLOSED_TOKEN;
     case XML_TOK_PARTIAL_CHAR:
-      if (!finalBuffer) {
+      if (!ps_finalBuffer) {
         *nextPtr = s;
         return XML_ERROR_NONE;
       }
@@ -4566,7 +4645,7 @@ epilogProcessor(XML_Parser parser,
       return XML_ERROR_JUNK_AFTER_DOC_ELEMENT;
     }
     eventPtr = s = next;
-    switch (parsing) {
+    switch (ps_parsing) {
     case XML_SUSPENDED: 
       *nextPtr = next;
       return XML_ERROR_NONE;
@@ -4619,8 +4698,8 @@ processInternalEntity(XML_Parser parser, ENTITY *entity,
                        textEnd, &next, XML_FALSE);
 
   if (result == XML_ERROR_NONE) {
-    if (textEnd != next && parsing == XML_SUSPENDED) {
-      entity->processed = next - textStart;
+    if (textEnd != next && ps_parsing == XML_SUSPENDED) {
+      entity->processed = (int)(next - textStart);
       processor = internalEntityProcessor;
     }
     else {
@@ -4665,8 +4744,8 @@ internalEntityProcessor(XML_Parser parser,
 
   if (result != XML_ERROR_NONE)
     return result;
-  else if (textEnd != next && parsing == XML_SUSPENDED) {
-    entity->processed = next - (char *)entity->textPtr;
+  else if (textEnd != next && ps_parsing == XML_SUSPENDED) {
+    entity->processed = (int)(next - (char *)entity->textPtr);
     return result;
   }
   else {
@@ -4683,7 +4762,7 @@ internalEntityProcessor(XML_Parser parser,
     processor = prologProcessor;
     tok = XmlPrologTok(encoding, s, end, &next);
     return doProlog(parser, encoding, s, end, tok, next, nextPtr, 
-                    (XML_Bool)!finalBuffer);
+                    (XML_Bool)!ps_finalBuffer);
   }
   else
 #endif /* XML_DTD */
@@ -4691,7 +4770,7 @@ internalEntityProcessor(XML_Parser parser,
     processor = contentProcessor;
     /* see externalEntityContentProcessor vs contentProcessor */
     return doContent(parser, parentParser ? 1 : 0, encoding, s, end,
-                     nextPtr, (XML_Bool)!finalBuffer); 
+                     nextPtr, (XML_Bool)!ps_finalBuffer); 
   }  
 }
 
@@ -4800,9 +4879,8 @@ appendAttributeValue(XML_Parser parser, const ENCODING *enc, XML_Bool isCdata,
           return XML_ERROR_NO_MEMORY;
         entity = (ENTITY *)lookup(&dtd->generalEntities, name, 0);
         poolDiscard(&temp2Pool);
-        /* first, determine if a check for an existing declaration is needed;
-           if yes, check that the entity exists, and that it is internal,
-           otherwise call the default handler (if called from content)
+        /* First, determine if a check for an existing declaration is needed;
+           if yes, check that the entity exists, and that it is internal.
         */
         if (pool == &dtd->pool)  /* are we called from prolog? */
           checkEntityDecl =
@@ -4821,13 +4899,16 @@ appendAttributeValue(XML_Parser parser, const ENCODING *enc, XML_Bool isCdata,
             return XML_ERROR_ENTITY_DECLARED_IN_PE;
         }
         else if (!entity) {
-          /* cannot report skipped entity here - see comments on
-             skippedEntityHandler
+          /* Cannot report skipped entity here - see comments on
+             skippedEntityHandler.
           if (skippedEntityHandler)
             skippedEntityHandler(handlerArg, name, 0);
           */
+          /* Cannot call the default handler because this would be
+             out of sync with the call to the startElementHandler.
           if ((pool == &tempPool) && defaultHandler)
             reportDefault(parser, enc, ptr, next);
+          */
           break;
         }
         if (entity->open) {
@@ -5127,12 +5208,12 @@ reportDefault(XML_Parser parser, const ENCODING *enc,
       ICHAR *dataPtr = (ICHAR *)dataBuf;
       XmlConvert(enc, &s, end, &dataPtr, (ICHAR *)dataBufEnd);
       *eventEndPP = s;
-      defaultHandler(handlerArg, dataBuf, dataPtr - (ICHAR *)dataBuf);
+      defaultHandler(handlerArg, dataBuf, (int)(dataPtr - (ICHAR *)dataBuf));
       *eventPP = s;
     } while (s != end);
   }
   else
-    defaultHandler(handlerArg, (XML_Char *)s, (XML_Char *)end - (XML_Char *)s);
+    defaultHandler(handlerArg, (XML_Char *)s, (int)((XML_Char *)end - (XML_Char *)s));
 }
 
 
@@ -5286,7 +5367,7 @@ getContext(XML_Parser parser)
     if (!poolAppendChar(&tempPool, XML_T('=')))
       return NULL;
     len = dtd->defaultPrefix.binding->uriLen;
-    if (namespaceSeparator != XML_T('\0'))
+    if (namespaceSeparator)
       len--;
     for (i = 0; i < len; i++)
       if (!poolAppendChar(&tempPool, dtd->defaultPrefix.binding->uri[i]))
@@ -5312,7 +5393,7 @@ getContext(XML_Parser parser)
     if (!poolAppendChar(&tempPool, XML_T('=')))
       return NULL;
     len = prefix->binding->uriLen;
-    if (namespaceSeparator != XML_T('\0'))
+    if (namespaceSeparator)
       len--;
     for (i = 0; i < len; i++)
       if (!poolAppendChar(&tempPool, prefix->binding->uri[i]))
@@ -6014,7 +6095,7 @@ poolGrow(STRING_POOL *pool)
     }
   }
   if (pool->blocks && pool->start == pool->blocks->s) {
-    int blockSize = (pool->end - pool->start)*2;
+    int blockSize = (int)(pool->end - pool->start)*2;
     pool->blocks = (BLOCK *)
       pool->mem->realloc_fcn(pool->blocks,
                              (offsetof(BLOCK, s)
@@ -6028,7 +6109,7 @@ poolGrow(STRING_POOL *pool)
   }
   else {
     BLOCK *tem;
-    int blockSize = pool->end - pool->start;
+    int blockSize = (int)(pool->end - pool->start);
     if (blockSize < INIT_BLOCK_SIZE)
       blockSize = INIT_BLOCK_SIZE;
     else
diff --git a/Modules/expat/xmlrole.c b/Modules/expat/xmlrole.c
index 2587fdf..15d4d8f 100644
--- a/Modules/expat/xmlrole.c
+++ b/Modules/expat/xmlrole.c
@@ -6,6 +6,8 @@
 #include "winconfig.h"
 #elif defined(MACOS_CLASSIC)
 #include "macconfig.h"
+#elif defined(__amigaos4__)
+#include "amigaconfig.h"
 #else
 #ifdef HAVE_EXPAT_CONFIG_H
 #include <expat_config.h>
@@ -793,7 +795,7 @@ attlist2(PROLOG_STATE *state,
     return XML_ROLE_ATTLIST_NONE;
   case XML_TOK_NAME:
     {
-      static const char *types[] = {
+      static const char * const types[] = {
         KW_CDATA,
         KW_ID,
         KW_IDREF,
diff --git a/Modules/expat/xmltok.c b/Modules/expat/xmltok.c
index 8b9d997..db92247 100644
--- a/Modules/expat/xmltok.c
+++ b/Modules/expat/xmltok.c
@@ -6,6 +6,8 @@
 #include "winconfig.h"
 #elif defined(MACOS_CLASSIC)
 #include "macconfig.h"
+#elif defined(__amigaos4__)
+#include "amigaconfig.h"
 #else
 #ifdef HAVE_EXPAT_CONFIG_H
 #include <expat_config.h>
@@ -1451,7 +1453,7 @@ static const char KW_UTF_16LE[] = {
 static int FASTCALL
 getEncodingIndex(const char *name)
 {
-  static const char *encodingNames[] = {
+  static const char * const encodingNames[] = {
     KW_ISO_8859_1,
     KW_US_ASCII,
     KW_UTF_8,
@@ -1484,7 +1486,7 @@ getEncodingIndex(const char *name)
 
 
 static int
-initScan(const ENCODING **encodingTable,
+initScan(const ENCODING * const *encodingTable,
          const INIT_ENCODING *enc,
          int state,
          const char *ptr,
diff --git a/Modules/expat/xmltok.h b/Modules/expat/xmltok.h
index 1ecd05f..ca867aa 100644
--- a/Modules/expat/xmltok.h
+++ b/Modules/expat/xmltok.h
@@ -111,8 +111,8 @@ extern "C" {
 
 typedef struct position {
   /* first line and first column are 0 not 1 */
-  unsigned long lineNumber;
-  unsigned long columnNumber;
+  XML_Size lineNumber;
+  XML_Size columnNumber;
 } POSITION;
 
 typedef struct {
diff --git a/Modules/expat/xmltok_impl.c b/Modules/expat/xmltok_impl.c
index 46569fe..0ee57ab 100644
--- a/Modules/expat/xmltok_impl.c
+++ b/Modules/expat/xmltok_impl.c
@@ -1714,7 +1714,7 @@ PREFIX(nameLength)(const ENCODING *enc, const char *ptr)
       ptr += MINBPC(enc);
       break;
     default:
-      return ptr - start;
+      return (int)(ptr - start);
     }
   }
 }
@@ -1750,7 +1750,7 @@ PREFIX(updatePosition)(const ENCODING *enc,
     LEAD_CASE(2) LEAD_CASE(3) LEAD_CASE(4)
 #undef LEAD_CASE
     case BT_LF:
-      pos->columnNumber = (unsigned)-1;
+      pos->columnNumber = (XML_Size)-1;
       pos->lineNumber++;
       ptr += MINBPC(enc);
       break;
@@ -1759,7 +1759,7 @@ PREFIX(updatePosition)(const ENCODING *enc,
       ptr += MINBPC(enc);
       if (ptr != end && BYTE_TYPE(enc, ptr) == BT_LF)
         ptr += MINBPC(enc);
-      pos->columnNumber = (unsigned)-1;
+      pos->columnNumber = (XML_Size)-1;
       break;
     default:
       ptr += MINBPC(enc);
diff --git a/Modules/expat/xmltok_ns.c b/Modules/expat/xmltok_ns.c
index 5610eb9..d2f8938 100644
--- a/Modules/expat/xmltok_ns.c
+++ b/Modules/expat/xmltok_ns.c
@@ -19,7 +19,7 @@ NS(XmlGetUtf16InternalEncoding)(void)
 #endif
 }
 
-static const ENCODING *NS(encodings)[] = {
+static const ENCODING * const NS(encodings)[] = {
   &ns(latin1_encoding).enc,
   &ns(ascii_encoding).enc,
   &ns(utf8_encoding).enc,
diff --git a/Modules/fcntlmodule.c b/Modules/fcntlmodule.c
index 477af06..4e49a7d 100644
--- a/Modules/fcntlmodule.c
+++ b/Modules/fcntlmodule.c
@@ -290,7 +290,7 @@ PyDoc_STRVAR(flock_doc,
 "flock(fd, operation)\n\
 \n\
 Perform the lock operation op on file descriptor fd.  See the Unix \n\
-manual flock(3) for details.  (On some systems, this function is\n\
+manual page for flock(3) for details.  (On some systems, this function is\n\
 emulated using fcntl().)");
 
 
@@ -327,7 +327,7 @@ fcntl_lockf(PyObject *self, PyObject *args)
 			l.l_type = F_WRLCK;
 		else {
 			PyErr_SetString(PyExc_ValueError,
-					"unrecognized flock argument");
+					"unrecognized lockf argument");
 			return NULL;
 		}
 		l.l_start = l.l_len = 0;
diff --git a/Modules/fpectlmodule.c b/Modules/fpectlmodule.c
index c6d4f77..74354ba 100644
--- a/Modules/fpectlmodule.c
+++ b/Modules/fpectlmodule.c
@@ -70,6 +70,10 @@ extern "C" {
 
 #if defined(__FreeBSD__)
 #  include <ieeefp.h>
+#elif defined(__VMS)
+#define __NEW_STARLET
+#include <starlet.h>
+#include <ieeedef.h>
 #endif
 
 #ifndef WANT_SIGFPE_HANDLER
@@ -190,6 +194,19 @@ static void fpe_reset(Sigfunc *handler)
 
 /*-- DEC ALPHA VMS --------------------------------------------------------*/
 #elif defined(__ALPHA) && defined(__VMS)
+	IEEE clrmsk;
+	IEEE setmsk;
+	clrmsk.ieee$q_flags =
+		IEEE$M_TRAP_ENABLE_UNF |  IEEE$M_TRAP_ENABLE_INE |
+		 IEEE$M_MAP_UMZ;
+	setmsk.ieee$q_flags =
+		IEEE$M_TRAP_ENABLE_INV | IEEE$M_TRAP_ENABLE_DZE |
+		IEEE$M_TRAP_ENABLE_OVF;
+	sys$ieee_set_fp_control(&clrmsk, &setmsk, 0);
+	PyOS_setsig(SIGFPE, handler);
+
+/*-- HP IA64 VMS --------------------------------------------------------*/
+#elif defined(__ia64) && defined(__VMS)
     PyOS_setsig(SIGFPE, handler);
 
 /*-- Cray Unicos ----------------------------------------------------------*/
@@ -244,6 +261,14 @@ static PyObject *turnoff_sigfpe(PyObject *self,PyObject *args)
 #ifdef __FreeBSD__
     fpresetsticky(fpgetsticky());
     fpsetmask(0);
+#elif defined(__VMS)
+	IEEE clrmsk;
+	 clrmsk.ieee$q_flags =
+		IEEE$M_TRAP_ENABLE_UNF |  IEEE$M_TRAP_ENABLE_INE |
+		IEEE$M_MAP_UMZ | IEEE$M_TRAP_ENABLE_INV |
+		IEEE$M_TRAP_ENABLE_DZE | IEEE$M_TRAP_ENABLE_OVF |
+		IEEE$M_INHERIT;
+	sys$ieee_set_fp_control(&clrmsk, 0, 0);
 #else
     fputs("Operation not implemented\n", stderr);
 #endif
diff --git a/Modules/getpath.c b/Modules/getpath.c
index 8eba730..78bfaf9 100644
--- a/Modules/getpath.c
+++ b/Modules/getpath.c
@@ -97,19 +97,19 @@
 
 
 #ifndef VERSION
-#if defined(__VMS)
-#define VERSION "2_1"
-#else
 #define VERSION "2.1"
 #endif
-#endif
 
 #ifndef VPATH
 #define VPATH "."
 #endif
 
 #ifndef PREFIX
-#define PREFIX "/usr/local"
+#  ifdef __VMS
+#    define PREFIX ""
+#  else
+#    define PREFIX "/usr/local"
+#  endif
 #endif
 
 #ifndef EXEC_PREFIX
diff --git a/Modules/itertoolsmodule.c b/Modules/itertoolsmodule.c
index 86b1bbf..d913890 100644
--- a/Modules/itertoolsmodule.c
+++ b/Modules/itertoolsmodule.c
@@ -357,7 +357,7 @@ teedataobject_jumplink(teedataobject *tdo)
 {
 	if (tdo->nextlink == NULL)
 		tdo->nextlink = teedataobject_new(tdo->it);
-	Py_INCREF(tdo->nextlink);
+	Py_XINCREF(tdo->nextlink);
 	return tdo->nextlink;
 }
 
@@ -468,7 +468,7 @@ tee_next(teeobject *to)
 
 	if (to->index >= LINKCELLS) {
 		link = teedataobject_jumplink(to->dataobj);
-		Py_XDECREF(to->dataobj);
+		Py_DECREF(to->dataobj);
 		to->dataobj = (teedataobject *)link;
 		to->index = 0;
 	}
@@ -522,6 +522,12 @@ tee_fromiterable(PyObject *iterable)
 	if (to == NULL) 
 		goto done;
 	to->dataobj = (teedataobject *)teedataobject_new(it);
+	if (!to->dataobj) {
+		PyObject_GC_Del(to);
+		to = NULL;
+		goto done;
+	}
+
 	to->index = 0;
 	to->weakreflist = NULL;
 	PyObject_GC_Track(to);
diff --git a/Modules/main.c b/Modules/main.c
index 23a760f..3f39c9b 100644
--- a/Modules/main.c
+++ b/Modules/main.c
@@ -39,7 +39,7 @@ static char **orig_argv;
 static int  orig_argc;
 
 /* command line options */
-#define BASE_OPTS "c:dEhim:OStuvVW:xX"
+#define BASE_OPTS "c:dEhim:OStuvVW:xX?"
 
 #ifndef RISCOS
 #define PROGRAM_OPTS BASE_OPTS
@@ -61,7 +61,7 @@ Options and arguments (and corresponding environment variables):\n\
 -c cmd : program passed in as string (terminates option list)\n\
 -d     : debug output from parser (also PYTHONDEBUG=x)\n\
 -E     : ignore environment variables (such as PYTHONPATH)\n\
--h     : print this help message and exit\n\
+-h     : print this help message and exit (also --help)\n\
 -i     : inspect interactively after running script, (also PYTHONINSPECT=x)\n\
          and force prompts, even if stdin does not appear to be a terminal\n\
 ";
@@ -76,7 +76,7 @@ static char *usage_2 = "\
 static char *usage_3 = "\
          see man page for details on internal buffering relating to '-u'\n\
 -v     : verbose (trace import statements) (also PYTHONVERBOSE=x)\n\
--V     : print the Python version number and exit\n\
+-V     : print the Python version number and exit (also --version)\n\
 -W arg : warning control (arg is action:message:category:module:lineno)\n\
 -x     : skip first line of source, allowing use of non-Unix forms of #!cmd\n\
 file   : program read from script file\n\
@@ -281,6 +281,7 @@ Py_Main(int argc, char **argv)
 			break;
 
 		case 'h':
+		case '?':
 			help++;
 			break;
 
@@ -431,9 +432,10 @@ Py_Main(int argc, char **argv)
 	}
 
 	if (module != NULL) {
-		/* Backup _PyOS_optind and force sys.arv[0] = module */
+		/* Backup _PyOS_optind and force sys.argv[0] = '-c'
+		   so that PySys_SetArgv correctly sets sys.path[0] to ''*/
 		_PyOS_optind--;
-        argv[_PyOS_optind] = module;
+		argv[_PyOS_optind] = "-c";
 	}
 
 	PySys_SetArgv(argc-_PyOS_optind, argv+_PyOS_optind);
diff --git a/Modules/mmapmodule.c b/Modules/mmapmodule.c
index d7a8944..afe9916 100644
--- a/Modules/mmapmodule.c
+++ b/Modules/mmapmodule.c
@@ -50,7 +50,10 @@ my_getpagesize(void)
 #endif /* UNIX */
 
 #include <string.h>
+
+#ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>
+#endif /* HAVE_SYS_TYPES_H */
 
 /* Prefer MAP_ANONYMOUS since MAP_ANON is deprecated according to man page. */
 #if !defined(MAP_ANONYMOUS) && defined(MAP_ANON)
diff --git a/Modules/posixmodule.c b/Modules/posixmodule.c
index c0280de..d968b6c 100644
--- a/Modules/posixmodule.c
+++ b/Modules/posixmodule.c
@@ -64,14 +64,21 @@ corresponding Unix manual entries for more information on calls.");
 #include "osdefs.h"
 #endif
 
+#ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>
+#endif /* HAVE_SYS_TYPES_H */
+
+#ifdef HAVE_SYS_STAT_H
 #include <sys/stat.h>
+#endif /* HAVE_SYS_STAT_H */
 
 #ifdef HAVE_SYS_WAIT_H
 #include <sys/wait.h>		/* For WNOHANG */
 #endif
 
+#ifdef HAVE_SIGNAL_H
 #include <signal.h>
+#endif
 
 #ifdef HAVE_FCNTL_H
 #include <fcntl.h>
@@ -246,9 +253,15 @@ extern int lstat(const char *, struct stat *);
 #endif
 
 #ifdef _MSC_VER
+#ifdef HAVE_DIRECT_H
 #include <direct.h>
+#endif
+#ifdef HAVE_IO_H
 #include <io.h>
+#endif
+#ifdef HAVE_PROCESS_H
 #include <process.h>
+#endif
 #include "osdefs.h"
 #define _WIN32_WINNT 0x0400	  /* Needed for CryptoAPI on some systems */
 #include <windows.h>
@@ -1227,7 +1240,9 @@ _pystat_fromstructstat(STRUCT_STAT *st)
 
 #define ISSLASHA(c) ((c) == '\\' || (c) == '/')
 #define ISSLASHW(c) ((c) == L'\\' || (c) == L'/')
+#ifndef ARRAYSIZE
 #define ARRAYSIZE(a) (sizeof(a) / sizeof(a[0]))
+#endif
 
 static BOOL
 IsUNCRootA(char *path, int pathlen)
@@ -1387,7 +1402,7 @@ finish:
 		return PyBool_FromLong(0);
 	/* Access is possible if either write access wasn't requested, or
 	   the file isn't read-only. */
-	return PyBool_FromLong(!(mode & 2) || !(attr && FILE_ATTRIBUTE_READONLY));
+	return PyBool_FromLong(!(mode & 2) || !(attr & FILE_ATTRIBUTE_READONLY));
 #else
 	int res;
 	if (!PyArg_ParseTuple(args, "eti:access", 
@@ -1847,6 +1862,15 @@ posix_listdir(PyObject *self, PyObject *args)
 				Py_BEGIN_ALLOW_THREADS
 				result = FindNextFileW(hFindFile, &wFileData);
 				Py_END_ALLOW_THREADS
+				/* FindNextFile sets error to ERROR_NO_MORE_FILES if
+				   it got to the end of the directory. */
+				if (!result && GetLastError() != ERROR_NO_MORE_FILES) {
+				    Py_DECREF(d);
+				    win32_error_unicode("FindNextFileW", wnamebuf);
+				    FindClose(hFindFile);
+				    free(wnamebuf);
+				    return NULL;
+				}
 			} while (result == TRUE);
 
 			if (FindClose(hFindFile) == FALSE) {
@@ -1906,6 +1930,14 @@ posix_listdir(PyObject *self, PyObject *args)
 		Py_BEGIN_ALLOW_THREADS
 		result = FindNextFile(hFindFile, &FileData);
 		Py_END_ALLOW_THREADS
+		/* FindNextFile sets error to ERROR_NO_MORE_FILES if
+		   it got to the end of the directory. */
+		if (!result && GetLastError() != ERROR_NO_MORE_FILES) {
+		    Py_DECREF(d);
+		    win32_error("FindNextFile", namebuf);
+		    FindClose(hFindFile);
+		    return NULL;
+		}
 	} while (result == TRUE);
 
 	if (FindClose(hFindFile) == FALSE) {
@@ -7867,6 +7899,42 @@ win32_urandom(PyObject *self, PyObject *args)
 }
 #endif
 
+#ifdef __VMS
+/* Use openssl random routine */
+#include <openssl/rand.h>
+PyDoc_STRVAR(vms_urandom__doc__,
+"urandom(n) -> str\n\n\
+Return a string of n random bytes suitable for cryptographic use.");
+
+static PyObject*
+vms_urandom(PyObject *self, PyObject *args)
+{
+	int howMany;
+	PyObject* result;
+
+	/* Read arguments */
+	if (! PyArg_ParseTuple(args, "i:urandom", &howMany))
+		return NULL;
+	if (howMany < 0)
+		return PyErr_Format(PyExc_ValueError,
+				    "negative argument not allowed");
+
+	/* Allocate bytes */
+	result = PyString_FromStringAndSize(NULL, howMany);
+	if (result != NULL) {
+		/* Get random data */
+		if (RAND_pseudo_bytes((unsigned char*)
+				      PyString_AS_STRING(result),
+				      howMany) < 0) {
+			Py_DECREF(result);
+			return PyErr_Format(PyExc_ValueError,
+					    "RAND_pseudo_bytes");
+		}
+	}
+	return result;
+}
+#endif
+
 static PyMethodDef posix_methods[] = {
 	{"access",	posix_access, METH_VARARGS, posix_access__doc__},
 #ifdef HAVE_TTYNAME
@@ -8160,6 +8228,9 @@ static PyMethodDef posix_methods[] = {
  #ifdef MS_WINDOWS
  	{"urandom", win32_urandom, METH_VARARGS, win32_urandom__doc__},
  #endif
+ #ifdef __VMS
+ 	{"urandom", vms_urandom, METH_VARARGS, vms_urandom__doc__},
+ #endif
 	{NULL,		NULL}		 /* Sentinel */
 };
 
diff --git a/Modules/pyexpat.c b/Modules/pyexpat.c
index 8a10bab..67f7007 100644
--- a/Modules/pyexpat.c
+++ b/Modules/pyexpat.c
@@ -238,6 +238,18 @@ error_external_entity_ref_handler(XML_Parser parser,
     return 0;
 }
 
+/* Dummy character data handler used when an error (exception) has
+   been detected, and the actual parsing can be terminated early.
+   This is needed since character data handler can't be safely removed
+   from within the character data handler, but can be replaced.  It is
+   used only from the character data handler trampoline, and must be
+   used right after `flag_error()` is called. */
+static void
+noop_character_data_handler(void *userData, const XML_Char *data, int len) 
+{
+    /* Do nothing. */
+}
+
 static void
 flag_error(xmlparseobject *self)
 {
@@ -457,6 +469,8 @@ call_character_handler(xmlparseobject *self, const XML_Char *buffer, int len)
     if (temp == NULL) {
         Py_DECREF(args);
         flag_error(self);
+        XML_SetCharacterDataHandler(self->itself,
+                                    noop_character_data_handler);
         return -1;
     }
     PyTuple_SET_ITEM(args, 0, temp);
@@ -469,6 +483,8 @@ call_character_handler(xmlparseobject *self, const XML_Char *buffer, int len)
     Py_DECREF(args);
     if (temp == NULL) {
         flag_error(self);
+        XML_SetCharacterDataHandler(self->itself,
+                                    noop_character_data_handler);
         return -1;
     }
     Py_DECREF(temp);
@@ -1542,8 +1558,22 @@ sethandler(xmlparseobject *self, const char *name, PyObject* v)
         xmlhandler c_handler = NULL;
         PyObject *temp = self->handlers[handlernum];
 
-        if (v == Py_None)
+        if (v == Py_None) {
+            /* If this is the character data handler, and a character
+               data handler is already active, we need to be more
+               careful.  What we can safely do is replace the existing
+               character data handler callback function with a no-op
+               function that will refuse to call Python.  The downside
+               is that this doesn't completely remove the character
+               data handler from the C layer if there's any callback
+               active, so Expat does a little more work than it
+               otherwise would, but that's really an odd case.  A more
+               elaborate system of handlers and state could remove the
+               C handler more effectively. */
+            if (handlernum == CharacterData && self->in_callback)
+                c_handler = noop_character_data_handler;
             v = NULL;
+        }
         else if (v != NULL) {
             Py_INCREF(v);
             c_handler = handler_info[handlernum].handler;
diff --git a/Modules/readline.c b/Modules/readline.c
index 8fda228..92f2d1f 100644
--- a/Modules/readline.c
+++ b/Modules/readline.c
@@ -20,6 +20,12 @@
 #include <locale.h>
 #endif
 
+#ifdef SAVE_LOCALE
+#  define RESTORE_LOCALE(sl) { setlocale(LC_CTYPE, sl); free(sl); }
+#else
+#  define RESTORE_LOCALE(sl) 
+#endif
+
 /* GNU readline definitions */
 #undef HAVE_CONFIG_H /* Else readline/chardefs.h includes strings.h */
 #include <readline/readline.h>
@@ -723,10 +729,7 @@ setup_readline(void)
 	 */
 	rl_initialize();
 
-#ifdef SAVE_LOCALE
-	setlocale(LC_CTYPE, saved_locale); /* Restore locale */
-	free(saved_locale);
-#endif
+	RESTORE_LOCALE(saved_locale)
 }
 
 /* Wrapper around GNU readline that handles signals differently. */
@@ -864,7 +867,8 @@ call_readline(FILE *sys_stdin, FILE *sys_stdout, char *prompt)
 	p = readline_until_enter_or_signal(prompt, &signal);
 	
 	/* we got an interrupt signal */
-	if(signal) {
+	if (signal) {
+		RESTORE_LOCALE(saved_locale)
 		return NULL;
 	}
 
@@ -873,6 +877,7 @@ call_readline(FILE *sys_stdin, FILE *sys_stdout, char *prompt)
 		p = PyMem_Malloc(1);
 		if (p != NULL)
 			*p = '\0';
+		RESTORE_LOCALE(saved_locale)
 		return p;
 	}
 
@@ -905,10 +910,7 @@ call_readline(FILE *sys_stdin, FILE *sys_stdout, char *prompt)
 		p[n+1] = '\0';
 	}
 	free(q);
-#ifdef SAVE_LOCALE
-	setlocale(LC_CTYPE, saved_locale); /* Restore locale */
-	free(saved_locale);
-#endif
+	RESTORE_LOCALE(saved_locale)
 	return p;
 }
 
diff --git a/Modules/selectmodule.c b/Modules/selectmodule.c
index dfa4e85..9eaae84 100644
--- a/Modules/selectmodule.c
+++ b/Modules/selectmodule.c
@@ -36,7 +36,7 @@
 extern void bzero(void *, int);
 #endif
 
-#ifndef DONT_HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>
 #endif
 
@@ -46,14 +46,14 @@ extern void bzero(void *, int);
 #endif
 
 #ifdef MS_WINDOWS
-#include <winsock.h>
+#  include <winsock.h>
 #else
-#ifdef __BEOS__
-#include <net/socket.h>
-#define SOCKET int
-#else
-#define SOCKET int
-#endif
+#  define SOCKET int
+#  ifdef __BEOS__
+#    include <net/socket.h>
+#  elif defined(__VMS)
+#    include <socket.h>
+#  endif
 #endif
 
 
@@ -668,7 +668,7 @@ arguments; each contains the subset of the corresponding file descriptors\n\
 that are ready.\n\
 \n\
 *** IMPORTANT NOTICE ***\n\
-On Windows, only sockets are supported; on Unix, all file descriptors.");
+On Windows and OpenVMS, only sockets are supported; on Unix, all file descriptors.");
 
 static PyMethodDef select_methods[] = {
     {"select",	select_select, METH_VARARGS, select_doc},
@@ -682,7 +682,7 @@ PyDoc_STRVAR(module_doc,
 "This module supports asynchronous I/O on multiple file descriptors.\n\
 \n\
 *** IMPORTANT NOTICE ***\n\
-On Windows, only sockets are supported; on Unix, all file descriptors.");
+On Windows and OpenVMS, only sockets are supported; on Unix, all file descriptors.");
 
 PyMODINIT_FUNC
 initselect(void)
diff --git a/Modules/socketmodule.c b/Modules/socketmodule.c
index 262abe8..bb99bde 100644
--- a/Modules/socketmodule.c
+++ b/Modules/socketmodule.c
@@ -161,7 +161,8 @@ shutdown(how) -- shut down traffic in one or both directions\n\
    (this includes the getaddrinfo emulation) protect access with a lock. */
 #if defined(WITH_THREAD) && (defined(__APPLE__) || \
     (defined(__FreeBSD__) && __FreeBSD_version+0 < 503000) || \
-    defined(__OpenBSD__) || defined(__NetBSD__) || !defined(HAVE_GETADDRINFO))
+    defined(__OpenBSD__) || defined(__NetBSD__) || \
+    defined(__VMS) || !defined(HAVE_GETADDRINFO))
 #define USE_GETADDRINFO_LOCK
 #endif
 
@@ -186,15 +187,8 @@ shutdown(how) -- shut down traffic in one or both directions\n\
 #endif
 
 #if defined(__VMS)
-#if ! defined(_SOCKADDR_LEN)
-#   ifdef getaddrinfo
-#      undef getaddrinfo
-#   endif
-#  include "TCPIP_IOCTL_ROUTINE"
-#else
 #  include <ioctl.h>
 #endif
-#endif
 
 #if defined(PYOS_OS2)
 # define  INCL_DOS
@@ -234,7 +228,9 @@ shutdown(how) -- shut down traffic in one or both directions\n\
 #endif
 
 /* Generic includes */
+#ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>
+#endif
 
 /* Generic socket object definitions and includes */
 #define PySocket_BUILDING_SOCKET
@@ -270,7 +266,9 @@ int h_errno; /* not used */
 #else
 
 /* MS_WINDOWS includes */
-# include <fcntl.h>
+# ifdef HAVE_FCNTL_H
+#  include <fcntl.h>
+# endif
 
 #endif
 
@@ -290,7 +288,7 @@ int h_errno; /* not used */
    * _SS_ALIGNSIZE is defined in sys/socket.h by 6.5.21,
    * for example, but not by 6.5.10.
    */
-#elif defined(_MSC_VER) && _MSC_VER>1200
+#elif defined(_MSC_VER) && _MSC_VER>1201
   /* Do not include addrinfo.h for MSVC7 or greater. 'addrinfo' and
    * EAI_* constants are defined in (the already included) ws2tcpip.h.
    */
@@ -359,11 +357,6 @@ const char *inet_ntop(int af, const void *src, char *dst, socklen_t size);
 #define SOCKETCLOSE close
 #endif
 
-#ifdef __VMS
-/* TCP/IP Services for VMS uses a maximum send/revc buffer length of 65535 */
-#define SEGMENT_SIZE 65535
-#endif
-
 #if defined(HAVE_BLUETOOTH_H) || defined(HAVE_BLUETOOTH_BLUETOOTH_H)
 #define USE_BLUETOOTH 1
 #if defined(__FreeBSD__)
@@ -374,6 +367,14 @@ const char *inet_ntop(int af, const void *src, char *dst, socklen_t size);
 #define _BT_SOCKADDR_MEMB(s, proto) &((s)->sock_addr)
 #define _BT_L2_MEMB(sa, memb) ((sa)->l2cap_##memb)
 #define _BT_RC_MEMB(sa, memb) ((sa)->rfcomm_##memb)
+#elif defined(__NetBSD__)
+#define sockaddr_l2 sockaddr_bt
+#define sockaddr_rc sockaddr_bt
+#define sockaddr_sco sockaddr_bt
+#define _BT_SOCKADDR_MEMB(s, proto) &((s)->sock_addr)
+#define _BT_L2_MEMB(sa, memb) ((sa)->bt_##memb)
+#define _BT_RC_MEMB(sa, memb) ((sa)->bt_##memb)
+#define _BT_SCO_MEMB(sa, memb) ((sa)->bt_##memb)
 #else
 #define _BT_SOCKADDR_MEMB(s, proto) (&((s)->sock_addr).bt_##proto)
 #define _BT_L2_MEMB(sa, memb) ((sa)->l2_##memb)
@@ -382,6 +383,11 @@ const char *inet_ntop(int af, const void *src, char *dst, socklen_t size);
 #endif
 #endif
 
+#ifdef __VMS
+/* TCP/IP Services for VMS uses a maximum send/recv buffer length */
+#define SEGMENT_SIZE (32 * 1024 -1)
+#endif
+
 /*
  * Constants for getnameinfo()
  */
@@ -413,14 +419,24 @@ static int taskwindow;
    there has to be a circular reference. */
 static PyTypeObject sock_type;
 
-/* Can we call select() with this socket without a buffer overrun? */
+#if defined(HAVE_POLL_H)
+#include <poll.h>
+#elif defined(HAVE_SYS_POLL_H)
+#include <sys/poll.h>
+#endif
+
 #ifdef Py_SOCKET_FD_CAN_BE_GE_FD_SETSIZE
 /* Platform can select file descriptors beyond FD_SETSIZE */
 #define IS_SELECTABLE(s) 1
+#elif defined(HAVE_POLL)
+/* Instead of select(), we'll use poll() since poll() works on any fd. */
+#define IS_SELECTABLE(s) 1
+/* Can we call select() with this socket without a buffer overrun? */
 #else
 /* POSIX says selecting file descriptors beyond FD_SETSIZE
-   has undefined behaviour. */
-#define IS_SELECTABLE(s) ((s)->sock_fd < FD_SETSIZE)
+   has undefined behaviour.  If there's no timeout left, we don't have to
+   call select, so it's a safe, little white lie. */
+#define IS_SELECTABLE(s) ((s)->sock_fd < FD_SETSIZE || s->sock_timeout <= 0.0)
 #endif
 
 static PyObject*
@@ -616,6 +632,30 @@ set_gaierror(int error)
 	return NULL;
 }
 
+#ifdef __VMS
+/* Function to send in segments */
+static int
+sendsegmented(int sock_fd, char *buf, int len, int flags)
+{
+	int n = 0;
+	int remaining = len;
+
+	while (remaining > 0) {
+		unsigned int segment;
+
+		segment = (remaining >= SEGMENT_SIZE ? SEGMENT_SIZE : remaining);
+		n = send(sock_fd, buf, segment, flags);
+		if (n < 0) {
+			return n;
+		}
+		remaining -= segment;
+		buf += segment;
+	} /* end while */
+
+	return len;
+}
+#endif
+
 /* Function to perform the setting of socket blocking mode
    internally. block = (1 | 0). */
 static int
@@ -640,8 +680,8 @@ internal_setblocking(PySocketSockObject *s, int block)
 	ioctl(s->sock_fd, FIONBIO, (caddr_t)&block, sizeof(block));
 #elif defined(__VMS)
 	block = !block;
-	ioctl(s->sock_fd, FIONBIO, (char *)&block);
-#else  /* !PYOS_OS2 && !_VMS */
+	ioctl(s->sock_fd, FIONBIO, (unsigned int *)&block);
+#else  /* !PYOS_OS2 && !__VMS */
 	delay_flag = fcntl(s->sock_fd, F_GETFL, 0);
 	if (block)
 		delay_flag &= (~O_NONBLOCK);
@@ -664,16 +704,14 @@ internal_setblocking(PySocketSockObject *s, int block)
 	return 1;
 }
 
-/* Do a select() on the socket, if necessary (sock_timeout > 0).
+/* Do a select()/poll() on the socket, if necessary (sock_timeout > 0).
    The argument writing indicates the direction.
    This does not raise an exception; we'll let our caller do that
    after they've reacquired the interpreter lock.
-   Returns 1 on timeout, 0 otherwise. */
+   Returns 1 on timeout, -1 on error, 0 otherwise. */
 static int
 internal_select(PySocketSockObject *s, int writing)
 {
-	fd_set fds;
-	struct timeval tv;
 	int n;
 
 	/* Nothing to do unless we're in timeout mode (not non-blocking) */
@@ -684,17 +722,40 @@ internal_select(PySocketSockObject *s, int writing)
 	if (s->sock_fd < 0)
 		return 0;
 
-	/* Construct the arguments to select */
-	tv.tv_sec = (int)s->sock_timeout;
-	tv.tv_usec = (int)((s->sock_timeout - tv.tv_sec) * 1e6);
-	FD_ZERO(&fds);
-	FD_SET(s->sock_fd, &fds);
+	/* Prefer poll, if available, since you can poll() any fd
+	 * which can't be done with select(). */
+#ifdef HAVE_POLL
+	{
+		struct pollfd pollfd;
+		int timeout;
 
-	/* See if the socket is ready */
-	if (writing)
-		n = select(s->sock_fd+1, NULL, &fds, NULL, &tv);
-	else
-		n = select(s->sock_fd+1, &fds, NULL, NULL, &tv);
+		pollfd.fd = s->sock_fd;
+		pollfd.events = writing ? POLLOUT : POLLIN;
+
+		/* s->sock_timeout is in seconds, timeout in ms */
+		timeout = (int)(s->sock_timeout * 1000 + 0.5); 
+		n = poll(&pollfd, 1, timeout);
+	}
+#else
+	{
+		/* Construct the arguments to select */
+		fd_set fds;
+		struct timeval tv;
+		tv.tv_sec = (int)s->sock_timeout;
+		tv.tv_usec = (int)((s->sock_timeout - tv.tv_sec) * 1e6);
+		FD_ZERO(&fds);
+		FD_SET(s->sock_fd, &fds);
+
+		/* See if the socket is ready */
+		if (writing)
+			n = select(s->sock_fd+1, NULL, &fds, NULL, &tv);
+		else
+			n = select(s->sock_fd+1, &fds, NULL, NULL, &tv);
+	}
+#endif
+	
+	if (n < 0)
+		return -1;
 	if (n == 0)
 		return 1;
 	return 0;
@@ -1494,7 +1555,7 @@ sock_accept(PySocketSockObject *s)
 			       &addrlen);
 	Py_END_ALLOW_THREADS
 
-	if (timeout) {
+	if (timeout == 1) {
 		PyErr_SetString(socket_timeout, "timed out");
 		return NULL;
 	}
@@ -1721,6 +1782,8 @@ sock_getsockopt(PySocketSockObject *s, PyObject *args)
 		return PyInt_FromLong(flag);
 	}
 #ifdef __VMS
+	/* socklen_t is unsigned so no negative test is needed,
+	   test buflen == 0 is previously done */
 	if (buflen > 1024) {
 #else
 	if (buflen <= 0 || buflen > 1024) {
@@ -1863,9 +1926,15 @@ internal_connect(PySocketSockObject *s, struct sockaddr *addr, int addrlen,
 	if (s->sock_timeout > 0.0) {
 		if (res < 0 && errno == EINPROGRESS && IS_SELECTABLE(s)) {
 			timeout = internal_select(s, 1);
-			res = connect(s->sock_fd, addr, addrlen);
-			if (res < 0 && errno == EISCONN)
-				res = 0;
+			if (timeout == 0) {
+				res = connect(s->sock_fd, addr, addrlen);
+				if (res < 0 && errno == EISCONN)
+					res = 0;
+			}
+			else if (timeout == -1)
+				res = errno;		/* had error */
+			else
+				res = EWOULDBLOCK;	/* timed out */
 		}
 	}
 
@@ -1895,7 +1964,7 @@ sock_connect(PySocketSockObject *s, PyObject *addro)
 	res = internal_connect(s, addr, addrlen, &timeout);
 	Py_END_ALLOW_THREADS
 
-	if (timeout) {
+	if (timeout == 1) {
 		PyErr_SetString(socket_timeout, "timed out");
 		return NULL;
 	}
@@ -1929,6 +1998,13 @@ sock_connect_ex(PySocketSockObject *s, PyObject *addro)
 	res = internal_connect(s, addr, addrlen, &timeout);
 	Py_END_ALLOW_THREADS
 
+	/* Signals are not errors (though they may raise exceptions).  Adapted
+	   from PyErr_SetFromErrnoWithFilenameObject(). */
+#ifdef EINTR
+	if (res == EINTR && PyErr_CheckSignals())
+		return NULL;
+#endif
+
 	return PyInt_FromLong((long) res);
 }
 
@@ -2149,10 +2225,10 @@ The mode and buffersize arguments are as for the built-in open() function.");
 static ssize_t
 sock_recv_guts(PySocketSockObject *s, char* cbuf, int len, int flags)
 {
-        ssize_t outlen = 0;
+        ssize_t outlen = -1;
         int timeout;
 #ifdef __VMS
-	int remaining, nread;
+	int remaining;
 	char *read_buf;
 #endif
 
@@ -2168,7 +2244,7 @@ sock_recv_guts(PySocketSockObject *s, char* cbuf, int len, int flags)
 		outlen = recv(s->sock_fd, cbuf, len, flags);
 	Py_END_ALLOW_THREADS
 
-	if (timeout) {
+	if (timeout == 1) {
 		PyErr_SetString(socket_timeout, "timed out");
 		return -1;
 	}
@@ -2183,6 +2259,7 @@ sock_recv_guts(PySocketSockObject *s, char* cbuf, int len, int flags)
 	remaining = len;
 	while (remaining != 0) {
 		unsigned int segment;
+		int nread = -1;
 
 		segment = remaining /SEGMENT_SIZE;
 		if (segment != 0) {
@@ -2198,7 +2275,7 @@ sock_recv_guts(PySocketSockObject *s, char* cbuf, int len, int flags)
 			nread = recv(s->sock_fd, read_buf, segment, flags);
 		Py_END_ALLOW_THREADS
 
-		if (timeout) {
+		if (timeout == 1) {
 			PyErr_SetString(socket_timeout, "timed out");
 			return -1;
 		}
@@ -2247,7 +2324,7 @@ sock_recv(PySocketSockObject *s, PyObject *args)
 	/* Call the guts */
 	outlen = sock_recv_guts(s, PyString_AS_STRING(buf), recvlen, flags);
 	if (outlen < 0) {
-		/* An error occured, release the string and return an
+		/* An error occurred, release the string and return an
 		   error. */
 		Py_DECREF(buf);
 		return NULL;
@@ -2346,7 +2423,7 @@ sock_recvfrom_guts(PySocketSockObject *s, char* cbuf, int len, int flags,
 {
 	sock_addr_t addrbuf;
 	int timeout;
-	ssize_t n = 0;
+	ssize_t n = -1;
 	socklen_t addrlen;
 
 	*addr = NULL;
@@ -2378,7 +2455,7 @@ sock_recvfrom_guts(PySocketSockObject *s, char* cbuf, int len, int flags,
 	}
 	Py_END_ALLOW_THREADS
 
-	if (timeout) {
+	if (timeout == 1) {
 		PyErr_SetString(socket_timeout, "timed out");
 		return -1;
 	}
@@ -2493,10 +2570,7 @@ static PyObject *
 sock_send(PySocketSockObject *s, PyObject *args)
 {
 	char *buf;
-	int len, n = 0, flags = 0, timeout;
-#ifdef __VMS
-	int send_length;
-#endif
+	int len, n = -1, flags = 0, timeout;
 
 	if (!PyArg_ParseTuple(args, "s#|i:send", &buf, &len, &flags))
 		return NULL;
@@ -2504,49 +2578,22 @@ sock_send(PySocketSockObject *s, PyObject *args)
 	if (!IS_SELECTABLE(s))
 		return select_error();
 
-#ifndef __VMS
 	Py_BEGIN_ALLOW_THREADS
 	timeout = internal_select(s, 1);
 	if (!timeout)
+#ifdef __VMS
+		n = sendsegmented(s->sock_fd, buf, len, flags);
+#else
 		n = send(s->sock_fd, buf, len, flags);
+#endif
 	Py_END_ALLOW_THREADS
 
-	if (timeout) {
+	if (timeout == 1) {
 		PyErr_SetString(socket_timeout, "timed out");
 		return NULL;
 	}
 	if (n < 0)
 		return s->errorhandler();
-#else
-	/* Divide packet into smaller segments for	*/
-	/*  TCP/IP Services for OpenVMS			*/
-	send_length = len;
-	while (send_length != 0) {
-		unsigned int segment;
-
-		segment = send_length / SEGMENT_SIZE;
-		if (segment != 0) {
-			segment = SEGMENT_SIZE;
-		}
-		else {
-			segment = send_length;
-		}
-		Py_BEGIN_ALLOW_THREADS
-		timeout = internal_select(s, 1);
-		if (!timeout)
-			n = send(s->sock_fd, buf, segment, flags);
-		Py_END_ALLOW_THREADS
-		if (timeout) {
-			PyErr_SetString(socket_timeout, "timed out");
-			return NULL;
-		}
-		if (n < 0) {
-			return s->errorhandler();
-		}
-		send_length -= segment;
-		buf += segment;
-	} /* end while */
-#endif /* !__VMS */
 	return PyInt_FromLong((long)n);
 }
 
@@ -2564,7 +2611,7 @@ static PyObject *
 sock_sendall(PySocketSockObject *s, PyObject *args)
 {
 	char *buf;
-	int len, n = 0, flags = 0, timeout;
+	int len, n = -1, flags = 0, timeout;
 
 	if (!PyArg_ParseTuple(args, "s#|i:sendall", &buf, &len, &flags))
 		return NULL;
@@ -2575,9 +2622,14 @@ sock_sendall(PySocketSockObject *s, PyObject *args)
 	Py_BEGIN_ALLOW_THREADS
 	do {
 		timeout = internal_select(s, 1);
+		n = -1;
 		if (timeout)
 			break;
+#ifdef __VMS
+		n = sendsegmented(s->sock_fd, buf, len, flags);
+#else
 		n = send(s->sock_fd, buf, len, flags);
+#endif
 		if (n < 0)
 			break;
 		buf += n;
@@ -2585,7 +2637,7 @@ sock_sendall(PySocketSockObject *s, PyObject *args)
 	} while (len > 0);
 	Py_END_ALLOW_THREADS
 
-	if (timeout) {
+	if (timeout == 1) {
 		PyErr_SetString(socket_timeout, "timed out");
 		return NULL;
 	}
@@ -2613,7 +2665,7 @@ sock_sendto(PySocketSockObject *s, PyObject *args)
 	PyObject *addro;
 	char *buf;
 	struct sockaddr *addr;
-	int addrlen, len, n = 0, flags, timeout;
+	int addrlen, len, n = -1, flags, timeout;
 
 	flags = 0;
 	if (!PyArg_ParseTuple(args, "s#O:sendto", &buf, &len, &addro)) {
@@ -2635,7 +2687,7 @@ sock_sendto(PySocketSockObject *s, PyObject *args)
 		n = sendto(s->sock_fd, buf, len, flags, addr, addrlen);
 	Py_END_ALLOW_THREADS
 
-	if (timeout) {
+	if (timeout == 1) {
 		PyErr_SetString(socket_timeout, "timed out");
 		return NULL;
 	}
diff --git a/Modules/spwdmodule.c b/Modules/spwdmodule.c
index b7bf20e..d3f309a 100644
--- a/Modules/spwdmodule.c
+++ b/Modules/spwdmodule.c
@@ -91,7 +91,7 @@ static PyObject *mkspent(struct spwd *p)
 #undef SETI
 
 	if (PyErr_Occurred()) {
-		Py_XDECREF(v);
+		Py_DECREF(v);
 		return NULL;
 	}
 
diff --git a/Modules/sre.h b/Modules/sre.h
index b07d210..d4af05c 100644
--- a/Modules/sre.h
+++ b/Modules/sre.h
@@ -23,7 +23,7 @@
 
 typedef struct {
     PyObject_VAR_HEAD
-    int groups; /* must be first! */
+    Py_ssize_t groups; /* must be first! */
     PyObject* groupindex;
     PyObject* indexgroup;
     /* compatibility */
@@ -31,7 +31,7 @@ typedef struct {
     int flags; /* flags used when compiling pattern source */
     PyObject *weakreflist; /* List of weak references */
     /* pattern code */
-    int codesize;
+    Py_ssize_t codesize;
     SRE_CODE code[1];
 } PatternObject;
 
@@ -42,10 +42,10 @@ typedef struct {
     PyObject* string; /* link to the target string (must be first) */
     PyObject* regs; /* cached list of matching spans */
     PatternObject* pattern; /* link to the regex (pattern) object */
-    int pos, endpos; /* current target slice */
-    int lastindex; /* last index marker seen by the engine (-1 if none) */
-    int groups; /* number of groups (start/end marks) */
-    int mark[1];
+    Py_ssize_t pos, endpos; /* current target slice */
+    Py_ssize_t lastindex; /* last index marker seen by the engine (-1 if none) */
+    Py_ssize_t groups; /* number of groups (start/end marks) */
+    Py_ssize_t mark[1];
 } MatchObject;
 
 typedef unsigned int (*SRE_TOLOWER_HOOK)(unsigned int ch);
@@ -54,7 +54,7 @@ typedef unsigned int (*SRE_TOLOWER_HOOK)(unsigned int ch);
 #define SRE_MARK_SIZE 200
 
 typedef struct SRE_REPEAT_T {
-    int count;
+    Py_ssize_t count;
     SRE_CODE* pattern; /* points to REPEAT operator arguments */
     void* last_ptr; /* helper to check for infinite loops */
     struct SRE_REPEAT_T *prev; /* points to previous repeat context */
@@ -68,17 +68,17 @@ typedef struct {
     void* end; /* end of original string */
     /* attributes for the match object */
     PyObject* string;
-    int pos, endpos;
+    Py_ssize_t pos, endpos;
     /* character size */
     int charsize;
     /* registers */
-    int lastindex;
-    int lastmark;
+    Py_ssize_t lastindex;
+    Py_ssize_t lastmark;
     void* mark[SRE_MARK_SIZE];
     /* dynamically allocated stuff */
     char* data_stack;
-    unsigned int data_stack_size;
-    unsigned int data_stack_base;
+    size_t data_stack_size;
+    size_t data_stack_base;
     /* current repeat context */
     SRE_REPEAT *repeat;
     /* hooks */
diff --git a/Modules/threadmodule.c b/Modules/threadmodule.c
index 6169658..448b11c 100644
--- a/Modules/threadmodule.c
+++ b/Modules/threadmodule.c
@@ -586,6 +586,60 @@ allocated consecutive numbers starting at 1, this behavior should not\n\
 be relied upon, and the number should be seen purely as a magic cookie.\n\
 A thread's identity may be reused for another thread after it exits.");
 
+static PyObject *
+thread_stack_size(PyObject *self, PyObject *args)
+{
+	size_t old_size;
+	Py_ssize_t new_size = 0;
+	int rc;
+
+	if (!PyArg_ParseTuple(args, "|n:stack_size", &new_size))
+		return NULL;
+
+	if (new_size < 0) {
+		PyErr_SetString(PyExc_ValueError,
+				"size must be 0 or a positive value");
+		return NULL;
+	}
+
+	old_size = PyThread_get_stacksize();
+
+	rc = PyThread_set_stacksize((size_t) new_size);
+	if (rc == -1) {
+		PyErr_Format(PyExc_ValueError,
+			     "size not valid: %zd bytes",
+			     new_size);
+		return NULL;
+	}
+	if (rc == -2) {
+		PyErr_SetString(ThreadError,
+				"setting stack size not supported");
+		return NULL;
+	}
+
+	return PyInt_FromSsize_t((Py_ssize_t) old_size);
+}
+
+PyDoc_STRVAR(stack_size_doc,
+"stack_size([size]) -> size\n\
+\n\
+Return the thread stack size used when creating new threads.  The\n\
+optional size argument specifies the stack size (in bytes) to be used\n\
+for subsequently created threads, and must be 0 (use platform or\n\
+configured default) or a positive integer value of at least 32,768 (32k).\n\
+If changing the thread stack size is unsupported, a ThreadError\n\
+exception is raised.  If the specified size is invalid, a ValueError\n\
+exception is raised, and the stack size is unmodified.  32k bytes\n\
+ currently the minimum supported stack size value to guarantee\n\
+sufficient stack space for the interpreter itself.\n\
+\n\
+Note that some platforms may have particular restrictions on values for\n\
+the stack size, such as requiring a minimum stack size larger than 32kB or\n\
+requiring allocation in multiples of the system memory page size\n\
+- platform documentation should be referred to for more information\n\
+(4kB pages are common; using multiples of 4096 for the stack size is\n\
+the suggested approach in the absence of more specific information).");
+
 static PyMethodDef thread_methods[] = {
 	{"start_new_thread",	(PyCFunction)thread_PyThread_start_new_thread,
 	                        METH_VARARGS,
@@ -605,6 +659,9 @@ static PyMethodDef thread_methods[] = {
 	 METH_NOARGS, interrupt_doc},
 	{"get_ident",		(PyCFunction)thread_get_ident, 
 	 METH_NOARGS, get_ident_doc},
+	{"stack_size",		(PyCFunction)thread_stack_size,
+				METH_VARARGS,
+				stack_size_doc},
 #ifndef NO_EXIT_PROG
 	{"exit_prog",		(PyCFunction)thread_PyThread_exit_prog,
 	 METH_VARARGS},
diff --git a/Modules/timemodule.c b/Modules/timemodule.c
index 87e543f..444b739 100644
--- a/Modules/timemodule.c
+++ b/Modules/timemodule.c
@@ -19,7 +19,9 @@
 
 #include <ctype.h>
 
+#ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>
+#endif /* HAVE_SYS_TYPES_H */
 
 #ifdef QUICKWIN
 #include <io.h>
@@ -404,13 +406,35 @@ time_strftime(PyObject *self, PyObject *args)
             indexing blindly into some array for a textual representation
             by some bad index (fixes bug #897625).
 
-            No check for year since handled in gettmarg().
+	    Also support values of zero from Python code for arguments in which
+	    that is out of range by forcing that value to the lowest value that
+	    is valid (fixed bug #1520914).
+
+	    Valid ranges based on what is allowed in struct tm:
+
+	    - tm_year: [0, max(int)] (1)
+	    - tm_mon: [0, 11] (2)
+	    - tm_mday: [1, 31]
+	    - tm_hour: [0, 23]
+	    - tm_min: [0, 59]
+	    - tm_sec: [0, 60]
+	    - tm_wday: [0, 6] (1)
+	    - tm_yday: [0, 365] (2)
+	    - tm_isdst: [-max(int), max(int)]
+
+	    (1) gettmarg() handles bounds-checking.
+	    (2) Python's acceptable range is one greater than the range in C,
+	        thus need to check against automatic decrement by gettmarg().
         */
-        if (buf.tm_mon < 0 || buf.tm_mon > 11) {
+	if (buf.tm_mon == -1)
+	    buf.tm_mon = 0;
+	else if (buf.tm_mon < 0 || buf.tm_mon > 11) {
             PyErr_SetString(PyExc_ValueError, "month out of range");
                         return NULL;
         }
-        if (buf.tm_mday < 1 || buf.tm_mday > 31) {
+	if (buf.tm_mday == 0)
+	    buf.tm_mday = 1;
+	else if (buf.tm_mday < 0 || buf.tm_mday > 31) {
             PyErr_SetString(PyExc_ValueError, "day of month out of range");
                         return NULL;
         }
@@ -432,7 +456,9 @@ time_strftime(PyObject *self, PyObject *args)
             PyErr_SetString(PyExc_ValueError, "day of week out of range");
             return NULL;
         }
-        if (buf.tm_yday < 0 || buf.tm_yday > 365) {
+	if (buf.tm_yday == -1)
+	    buf.tm_yday = 0;
+	else if (buf.tm_yday < 0 || buf.tm_yday > 365) {
             PyErr_SetString(PyExc_ValueError, "day of year out of range");
             return NULL;
         }
@@ -465,6 +491,14 @@ time_strftime(PyObject *self, PyObject *args)
 			return ret;
 		}
 		free(outbuf);
+#if defined _MSC_VER && _MSC_VER >= 1400 && defined(__STDC_SECURE_LIB__)
+		/* VisualStudio .NET 2005 does this properly */
+		if (buflen == 0 && errno == EINVAL) {
+			PyErr_SetString(PyExc_ValueError, "Invalid format string");
+			return 0;
+		}
+#endif
+		
 	}
 }
 
diff --git a/Modules/unicodedata.c b/Modules/unicodedata.c
index 0660353..1b0be28 100644
--- a/Modules/unicodedata.c
+++ b/Modules/unicodedata.c
@@ -395,6 +395,7 @@ unicodedata_decomposition(PyObject *self, PyObject *args)
     PyUnicodeObject *v;
     char decomp[256];
     int code, index, count, i;
+    unsigned int prefix_index;
 
     if (!PyArg_ParseTuple(args, "O!:decomposition",
 			  &PyUnicode_Type, &v))
@@ -428,9 +429,15 @@ unicodedata_decomposition(PyObject *self, PyObject *args)
     /* XXX: could allocate the PyString up front instead
        (strlen(prefix) + 5 * count + 1 bytes) */
 
+    /* Based on how index is calculated above and decomp_data is generated
+       from Tools/unicode/makeunicodedata.py, it should not be possible
+       to overflow decomp_prefix. */
+    prefix_index = decomp_data[index] & 255;
+    assert(prefix_index < (sizeof(decomp_prefix)/sizeof(*decomp_prefix)));
+
     /* copy prefix */
-    i = strlen(decomp_prefix[decomp_data[index] & 255]);
-    memcpy(decomp, decomp_prefix[decomp_data[index] & 255], i);
+    i = strlen(decomp_prefix[prefix_index]);
+    memcpy(decomp, decomp_prefix[prefix_index], i);
 
     while (count-- > 0) {
         if (i)
diff --git a/Modules/zlibmodule.c b/Modules/zlibmodule.c
index 06b0690..da31e8b 100644
--- a/Modules/zlibmodule.c
+++ b/Modules/zlibmodule.c
@@ -653,6 +653,7 @@ PyZlib_flush(compobject *self, PyObject *args)
     return RetVal;
 }
 
+#ifdef HAVE_ZLIB_COPY
 PyDoc_STRVAR(comp_copy__doc__,
 "copy() -- Return a copy of the compression object.");
 
@@ -754,6 +755,7 @@ error:
     Py_XDECREF(retval);
     return NULL;
 }
+#endif
 
 PyDoc_STRVAR(decomp_flush__doc__,
 "flush( [length] ) -- Return a string containing any remaining\n"
@@ -827,8 +829,10 @@ static PyMethodDef comp_methods[] =
                  comp_compress__doc__},
     {"flush", (binaryfunc)PyZlib_flush, METH_VARARGS,
               comp_flush__doc__},
+#ifdef HAVE_ZLIB_COPY
     {"copy",  (PyCFunction)PyZlib_copy, METH_NOARGS,
               comp_copy__doc__},
+#endif
     {NULL, NULL}
 };
 
@@ -838,8 +842,10 @@ static PyMethodDef Decomp_methods[] =
                    decomp_decompress__doc__},
     {"flush", (binaryfunc)PyZlib_unflush, METH_VARARGS,
               decomp_flush__doc__},
+#ifdef HAVE_ZLIB_COPY
     {"copy",  (PyCFunction)PyZlib_uncopy, METH_NOARGS,
               decomp_copy__doc__},
+#endif
     {NULL, NULL}
 };
author	Thomas Wouters <thomas@python.org>	2006-08-11 14:57:12 (GMT)
committer	Thomas Wouters <thomas@python.org>	2006-08-11 14:57:12 (GMT)
commit	0e3f591aeeef9ed715f8770320f4c4c7332a8794 (patch)
tree	c78451f502f6cd6b575a61105165ae9194e29a42 /Modules
parent	3cf5b1eef99fbd85bbd2bcd2e6223dfec92daf8b (diff)
download	cpython-0e3f591aeeef9ed715f8770320f4c4c7332a8794.zip cpython-0e3f591aeeef9ed715f8770320f4c4c7332a8794.tar.gz cpython-0e3f591aeeef9ed715f8770320f4c4c7332a8794.tar.bz2