summaryrefslogtreecommitdiffstats
path: root/PC/example_nt/readme.txt
diff options
context:
space:
mode:
authorGuido van Rossum <guido@python.org>1997-05-16 16:17:20 (GMT)
committerGuido van Rossum <guido@python.org>1997-05-16 16:17:20 (GMT)
commit29168ce1ed5e5fbc11343fc6d8472679281c2396 (patch)
tree3e24505acdebe9abf0c78d8c3b0911986830d12e /PC/example_nt/readme.txt
parent3cca24570eeaa69e5cf4ce45e8fc92338ab56bc0 (diff)
downloadcpython-29168ce1ed5e5fbc11343fc6d8472679281c2396.zip
cpython-29168ce1ed5e5fbc11343fc6d8472679281c2396.tar.gz
cpython-29168ce1ed5e5fbc11343fc6d8472679281c2396.tar.bz2
Added CRLF for Notepad.
Diffstat (limited to 'PC/example_nt/readme.txt')
-rw-r--r--PC/example_nt/readme.txt232
1 files changed, 116 insertions, 116 deletions
diff --git a/PC/example_nt/readme.txt b/PC/example_nt/readme.txt
index 206ac2e..1424882 100644
--- a/PC/example_nt/readme.txt
+++ b/PC/example_nt/readme.txt
@@ -1,116 +1,116 @@
-Example Python extension for Windows NT
-=======================================
-
-This directory contains everything you need to build a Python
-extension module using Microsoft VC++ 4.x ("Developer Studio"), except
-for the Python distribution. It has been tested most recently with
-version 4.2.
-
-The "example_nt" subdirectory should be an immediate subdirectory of
-the Python source directory -- a direct sibling of Include and PC, in
-particular, which are referenced as "..\Include" and "..\PC". In
-other words, it should *not* be used "as is". Copy or move it up one
-level or you will regret it! (This is done to keep all the PC
-specific files inside the PC subdirectory of the distribution, where
-they belong.)
-
-It is also assumed that the build results of Python are in the
-directory ..\vc40. In particular, the python15.lib file is referred
-to as "..\vc40\python15.lib".
-
-In order to use the example project from Developer Studio, use the
-"File->Open Workspace..." dialog (*not* the "File->Open..." dialog!).
-Change the pattern to "*.mak" and select the file "example.mak". Now
-choose "File->Save All" and the othe project files will be created.
-
-In order to check that everything is set up right, try building:
-choose "Build->Build example.dll". This creates all intermediate and
-result files in a subdirectory which is called either Debug or Release
-depending on which configuration you have chosen (as distributed,
-Debug is selected as the default configuration).
-
-Once the build has succeeded, test the resulting DLL. In a DOS
-command window, chdir to that directory. You should now be able to
-repeat the following session "(C>" is the DOS prompt, ">>>" is the
-Python prompt):
-
- C> ..\..\vc40\python.exe
- >>> import example
- >>> example.foo()
- Hello, world
- >>>
-
-
-Creating the project
---------------------
-
-There are two ways to use this example to create a project for your
-own module. First, choose a name ("spam" is always a winner :-) and
-create a directory for it. Copy your C sources into it. Note that
-the module source file name does not necessarily have to match the
-module name, but the "init" function name should match the module name
--- i.e. you can only import a module "spam" if its init function is
-called "initspam()", and it should call Py_InitModule with the string
-"spam" as its first argument. By convention, it lives in a file
-called "spam.c" or "spammodule.c". The output file should be called
-"spam.dll" or "spam.pyd" (the latter is supported to avoid confusion
-with a system library "spam.dll" to which your module could be a
-Python interface).
-
-Now your options are:
-
-1) Clone example.mak. Start by copying example_nt\example.mak to
-spam\spam.mak. Do a global edit on spam.mak, replacing all
-occurrences of the string "example" by "spam", and all occurrences of
-"DEP_CPP_EXAMP" by something like "DEP_CPP_SPAM". You can now use
-this makefile to create a project file by opening it as a workspace
-(you have to change the pattern to *.mak first).
-
-2) Create a brand new project; instructions are below.
-
-In both cases, copy example_nt\example.def to spam\spam.def, and edit
-spam\spam.def so its second line contains the string "initspam". If
-you created a new project yourself, add the file spam.def to the
-project now.
-
-You are now all set to build your extension, unless it requires other
-external libraries, include files, etc. See Python's Extending and
-Embedding manual for instructions on how to write an extension.
-
-
-Creating a brand new project
-----------------------------
-
-If you don't feel comfortable with editing Makefiles, you can create a
-brand new project from scratch easily.
-
-Use the "File->New..." dialog to create a new Project Workspace.
-Select Dynamic-Link Library, enter the name ("spam"), and make sure
-the "Location" is set to the spam directory you have created (which
-should be a direct subdirectory of the Python build tree). Select
-Win32 as the platform (in my version, this is the only choice). Click
-"Create".
-
-Now open the "Build->Settings..." dialog. (Impressive, isn't it? :-)
-You only need to change a few settings. Make sure you have both the
-Debug and the Release configuration selected when you make the first
-change. Select the "C/C++" tab. Choose the "Preprocessor" category
-in the popup menu at the top. Type the following text in the entry
-box labeled "Addditional include directories:"
-
- ..\Include,..\PC
-
-You must also change the run-time library. This must be done
-separately for the Release and Debug configurations. Choose the "Code
-Generation" category in the C/C++ tab. In the box labeled "Use
-run-time library", choose "Multithreaded DLL" for the Release
-configuration, and "Debug Multithreaded DLL" for the Debug
-configuration. That's all.
-
-You should now first create the file spam.def as instructed in the
-previous section.
-
-Now chose the "Insert->Files into Project..." dialog. Set the pattern
-to *.* and select both spam.c and spam.def and click OK. (Inserting
-them one by one is fine too.) Using the same dialog, choose the file
-..\vc40\python15.lib and insert it into the project.
+Example Python extension for Windows NT
+=======================================
+
+This directory contains everything you need to build a Python
+extension module using Microsoft VC++ 4.x ("Developer Studio"), except
+for the Python distribution. It has been tested most recently with
+version 4.2.
+
+The "example_nt" subdirectory should be an immediate subdirectory of
+the Python source directory -- a direct sibling of Include and PC, in
+particular, which are referenced as "..\Include" and "..\PC". In
+other words, it should *not* be used "as is". Copy or move it up one
+level or you will regret it! (This is done to keep all the PC
+specific files inside the PC subdirectory of the distribution, where
+they belong.)
+
+It is also assumed that the build results of Python are in the
+directory ..\vc40. In particular, the python15.lib file is referred
+to as "..\vc40\python15.lib".
+
+In order to use the example project from Developer Studio, use the
+"File->Open Workspace..." dialog (*not* the "File->Open..." dialog!).
+Change the pattern to "*.mak" and select the file "example.mak". Now
+choose "File->Save All" and the othe project files will be created.
+
+In order to check that everything is set up right, try building:
+choose "Build->Build example.dll". This creates all intermediate and
+result files in a subdirectory which is called either Debug or Release
+depending on which configuration you have chosen (as distributed,
+Debug is selected as the default configuration).
+
+Once the build has succeeded, test the resulting DLL. In a DOS
+command window, chdir to that directory. You should now be able to
+repeat the following session "(C>" is the DOS prompt, ">>>" is the
+Python prompt):
+
+ C> ..\..\vc40\python.exe
+ >>> import example
+ >>> example.foo()
+ Hello, world
+ >>>
+
+
+Creating the project
+--------------------
+
+There are two ways to use this example to create a project for your
+own module. First, choose a name ("spam" is always a winner :-) and
+create a directory for it. Copy your C sources into it. Note that
+the module source file name does not necessarily have to match the
+module name, but the "init" function name should match the module name
+-- i.e. you can only import a module "spam" if its init function is
+called "initspam()", and it should call Py_InitModule with the string
+"spam" as its first argument. By convention, it lives in a file
+called "spam.c" or "spammodule.c". The output file should be called
+"spam.dll" or "spam.pyd" (the latter is supported to avoid confusion
+with a system library "spam.dll" to which your module could be a
+Python interface).
+
+Now your options are:
+
+1) Clone example.mak. Start by copying example_nt\example.mak to
+spam\spam.mak. Do a global edit on spam.mak, replacing all
+occurrences of the string "example" by "spam", and all occurrences of
+"DEP_CPP_EXAMP" by something like "DEP_CPP_SPAM". You can now use
+this makefile to create a project file by opening it as a workspace
+(you have to change the pattern to *.mak first).
+
+2) Create a brand new project; instructions are below.
+
+In both cases, copy example_nt\example.def to spam\spam.def, and edit
+spam\spam.def so its second line contains the string "initspam". If
+you created a new project yourself, add the file spam.def to the
+project now.
+
+You are now all set to build your extension, unless it requires other
+external libraries, include files, etc. See Python's Extending and
+Embedding manual for instructions on how to write an extension.
+
+
+Creating a brand new project
+----------------------------
+
+If you don't feel comfortable with editing Makefiles, you can create a
+brand new project from scratch easily.
+
+Use the "File->New..." dialog to create a new Project Workspace.
+Select Dynamic-Link Library, enter the name ("spam"), and make sure
+the "Location" is set to the spam directory you have created (which
+should be a direct subdirectory of the Python build tree). Select
+Win32 as the platform (in my version, this is the only choice). Click
+"Create".
+
+Now open the "Build->Settings..." dialog. (Impressive, isn't it? :-)
+You only need to change a few settings. Make sure you have both the
+Debug and the Release configuration selected when you make the first
+change. Select the "C/C++" tab. Choose the "Preprocessor" category
+in the popup menu at the top. Type the following text in the entry
+box labeled "Addditional include directories:"
+
+ ..\Include,..\PC
+
+You must also change the run-time library. This must be done
+separately for the Release and Debug configurations. Choose the "Code
+Generation" category in the C/C++ tab. In the box labeled "Use
+run-time library", choose "Multithreaded DLL" for the Release
+configuration, and "Debug Multithreaded DLL" for the Debug
+configuration. That's all.
+
+You should now first create the file spam.def as instructed in the
+previous section.
+
+Now chose the "Insert->Files into Project..." dialog. Set the pattern
+to *.* and select both spam.c and spam.def and click OK. (Inserting
+them one by one is fine too.) Using the same dialog, choose the file
+..\vc40\python15.lib and insert it into the project.