summaryrefslogtreecommitdiffstats
path: root/Tools/freeze
diff options
context:
space:
mode:
authorGuido van Rossum <guido@python.org>1996-08-26 05:14:20 (GMT)
committerGuido van Rossum <guido@python.org>1996-08-26 05:14:20 (GMT)
commit96c4dd95cfdd3ed761c7030de047839419689a68 (patch)
tree74df60533eb501de0f79e53776f29cbb3912b292 /Tools/freeze
parent6498cad34eaaa724e140b813c74c4593c247cb02 (diff)
downloadcpython-96c4dd95cfdd3ed761c7030de047839419689a68.zip
cpython-96c4dd95cfdd3ed761c7030de047839419689a68.tar.gz
cpython-96c4dd95cfdd3ed761c7030de047839419689a68.tar.bz2
OK, now it uses sys.[exec_]prefix and supports
a -o option to specify an output directory. *Much* more convenient. Removed a whole lot of hullabaloo from the README file, too.
Diffstat (limited to 'Tools/freeze')
-rw-r--r--Tools/freeze/README92
-rwxr-xr-xTools/freeze/freeze.py107
2 files changed, 68 insertions, 131 deletions
diff --git a/Tools/freeze/README b/Tools/freeze/README
index 5befaf0..32c7458 100644
--- a/Tools/freeze/README
+++ b/Tools/freeze/README
@@ -69,63 +69,16 @@ to run.)
How do I use Freeze?
--------------------
-Ideally, you should be able to use it as follows:
+Normally, you should be able to use it as follows:
python freeze.py hello.py
where hello.py is your program and freeze.py is the main file of
Freeze (in actuality, you'll probably specify an absolute pathname
-such as /ufs/guido/src/python/Tools/freeze/freeze.py).
+such as /usr/joe/python/Tools/freeze/freeze.py).
-Unfortunately, this doesn't work. Well, it might, but somehow it's
-extremely unlikely that it'll work on the first try. (If it does,
-skip to the next section.) Most likely you'll get this error message:
-
- needed directory /usr/local/lib/python/lib not found
-
-The reason is that Freeze require that some files that are normally
-kept inside the Python build tree are installed, and it searches for
-it in the default install location. (The default install prefix is
-/usr/local; these particular files are installed at lib/python/lib
-under the install prefix.)
-
-The particular set of files needed is installed only if you run "make
-libainstall" (note: "liba", not "lib") in the Python build tree (which
-is the tree where you build Python -- often, but not necessarily, this
-is also the Python source tree). If you have in fact done a "make
-libainstall" but used a different prefix, all you need to do is pass
-that same prefix to Freeze with the -p option:
-
- python freeze.py -p your-prefix hello.py
-
-If you haven't run "make libainstall" yet, you should do it now
-(perhaps figuring out first *where* you want everything to be
-installed).
-
-
-How do I configure Freeze?
---------------------------
-
-It's a good idea to change the first line marked with XXX in freeze.py
-(an assignment to variable PACK) to point to the absolute pathname of
-the directory where Freeze lives (Tools/freeze in the Python source
-tree.) This makes it possible to call Freeze from other directories.
-
-You can also edit the assignment to variable PREFIX (also marked with
-XXX) -- this saves a lot of -p options.
-
-
-How do I use Freeze with extensions modules?
---------------------------------------------
-
-XXX to be written. (In short: pass -e extensionbuilddir.)
-
-
-How do I use Freeze with dynamically loaded extension modules?
---------------------------------------------------------------
-
-XXX to be written. (In short: pass -e modulebuilddir -- this even
-works if you built the modules in Python's own Modules directory.)
+(With Python 1.4, freeze is much more likely to work "out of the box"
+than before, provided Python has been installed properly.)
What do I do next?
@@ -134,37 +87,22 @@ What do I do next?
Freeze creates three files: frozen.c, config.c and Makefile. To
produce the frozen version of your program, you can simply type
"make". This should produce a binary file. If the filename argument
-to Freeze was "hello.py", the binary will be called "hello". On the
-other hand, if the argument was "hello", the binary will be called
-"hello.bin". If you passed any other filename, all bets are off. :-)
-In any case, the name of the file will be printed as the last message
-from Freeze.
+to Freeze was "hello.py", the binary will be called "hello".
+
+Note: you can use the -o option to freeze to specify an alternative
+directory where these files are created. This makes it easier to
+clean up after you've shipped the frozen binary.
Troubleshooting
---------------
If you have trouble using Freeze for a large program, it's probably
-best to start playing with a really simple program first (like the
-file hello.py). If you can't get that to work there's something
-fundamentally wrong -- read the text above to find out how to install
-relevant parts of Python properly and how to configure Freeze to find
-them.
-
-A common problem is having installed an old version -- rerunning "make
-libainstall" often clears up problems with missing modules or
-libraries at link time.
-
-
-What is nfreeze.py?
--------------------
-
-The script nfreeze.py is an unsupported variant on freeze.py which
-creates all files in a temporary directory and runs "make" there. It
-has the advantage that it doesn't overwrite files in the current
-directory, but the disadvantage is that it removes all files when it
-is finished.
+best to start playing with a really simple program first (like the file
+hello.py). If you can't get that to work there's something
+fundamentally wrong -- perhaps you haven't installed Python. To do a
+proper install, you should do "make install" in the Python root
+directory.
---Guido van Rossum, CWI, Amsterdam <mailto:Guido.van.Rossum@cwi.nl>
-<http://www.cwi.nl/cwi/people/Guido.van.Rossum.html>
+--Guido van Rossum (home page: http://www.python.org/~guido/)
diff --git a/Tools/freeze/freeze.py b/Tools/freeze/freeze.py
index 051748b..eb91ecb 100755
--- a/Tools/freeze/freeze.py
+++ b/Tools/freeze/freeze.py
@@ -1,36 +1,29 @@
#! /usr/local/bin/python
-# "Freeze" a Python script into a binary.
-# Usage: see variable usage_msg below (before the imports!)
+"""Freeze a Python script into a binary.
-# HINTS:
-# - Edit the lines marked XXX below to localize.
-# - Make sure the #! line above matches the localizations.
-# - You must have done "make inclinstall libainstall" in the Python
-# build directory.
-# - The script name should end in ".py".
-# - The script should not use dynamically loaded modules
-# (*.so on most systems).
+usage: freeze [options...] script.py [module]...
+Options:
-# Usage message
-
-usage_msg = """
-usage: freeze [-p prefix] [-P exec_prefix] [-e extension] script.py [module]...
-
--p prefix: This is the prefix used when you ran
- 'Make inclinstall libainstall' in the Python build directory.
+-p prefix: This is the prefix used when you ran ``name install''
+ in the Python build directory.
(If you never ran this, freeze won't work.)
- The default is /usr/local.
+ The default is whatever sys.prefix evaluates to.
-P exec_prefix: Like -p but this is the 'exec_prefix', used to
- install objects etc. The default is the value for -p.
+ install objects etc. The default is whatever sys.exec_prefix
+ evaluates to, or the -p argument if given.
-e extension: A directory containing additional .o files that
may be used to resolve modules. This directory
should also have a Setup file describing the .o files.
More than one -e option may be given.
+-o dir: Directory where the output files are created; default '.'.
+
+Arguments:
+
script.py: The Python script to be executed by the resulting binary.
It *must* end with a .py suffix!
@@ -43,22 +36,11 @@ NOTES:
In order to use freeze successfully, you must have built Python and
installed it ("make install").
-The -p and -P options passed into the freeze script must correspond to
-the --prefix and --exec-prefix options passed into Python's configure
-script.
+The script should not use modules provided only as shared libraries;
+if it does, the resulting binary is not self-contained.
"""
-# XXX Change the following line to point to your Tools/freeze directory
-PACK = '/home/guido/python/src/Tools/freeze'
-
-# XXX Change the following line to point to your install prefix
-PREFIX = '/usr/local'
-
-# XXX Change the following line to point to your install exec_prefix
-EXEC_PREFIX = None # If None, use -p option for default
-
-
# Import standard modules
import cmp
@@ -69,16 +51,6 @@ import sys
import addpack
-# Set the directory to look for the freeze-private modules
-
-dir = os.path.dirname(sys.argv[0])
-if dir:
- pack = dir
-else:
- pack = PACK
-addpack.addpack(pack)
-
-
# Import the freeze-private modules
import checkextensions
@@ -93,10 +65,11 @@ import parsesetup
def main():
# overridable context
- prefix = PREFIX # settable with -p option
+ prefix = None # settable with -p option
exec_prefix = None # settable with -P option
extensions = []
path = sys.path
+ odir = ''
# output files
frozen_c = 'frozen.c'
@@ -106,7 +79,7 @@ def main():
# parse command line
try:
- opts, args = getopt.getopt(sys.argv[1:], 'e:p:P:')
+ opts, args = getopt.getopt(sys.argv[1:], 'e:o:p:P:')
except getopt.error, msg:
usage('getopt error: ' + str(msg))
@@ -114,20 +87,26 @@ def main():
for o, a in opts:
if o == '-e':
extensions.append(a)
+ if o == '-o':
+ odir = a
if o == '-p':
prefix = a
if o == '-P':
exec_prefix = a
- # default exec_prefix
- if exec_prefix is None:
- exec_prefix = EXEC_PREFIX
- if exec_prefix is None:
+ # default prefix and exec_prefix
+ if not exec_prefix:
+ if prefix:
exec_prefix = prefix
+ else:
+ exec_prefix = sys.exec_prefix
+ if not prefix:
+ prefix = sys.prefix
# locations derived from options
- binlib = os.path.join(exec_prefix, 'lib/python1.4/config')
- incldir = os.path.join(prefix, 'include/python1.4')
+ version = sys.version[:3]
+ binlib = os.path.join(exec_prefix, 'lib/python%s/config' % version)
+ incldir = os.path.join(prefix, 'include/python%s' % version)
config_c_in = os.path.join(binlib, 'config.c.in')
frozenmain_c = os.path.join(binlib, 'frozenmain.c')
getpath_c = os.path.join(binlib, 'getpath.c')
@@ -181,6 +160,22 @@ def main():
target = base
else:
target = base + '.bin'
+
+ # handle -o option
+ base_frozen_c = frozen_c
+ base_config_c = config_c
+ base_target = target
+ if odir and not os.path.isdir(odir):
+ try:
+ os.mkdir(odir)
+ print "Created output directory", odir
+ except os.error, msg:
+ usage('%s: mkdir failed (%s)' % (odir, str(msg)))
+ if odir:
+ frozen_c = os.path.join(odir, frozen_c)
+ config_c = os.path.join(odir, config_c)
+ target = os.path.join(odir, target)
+ makefile = os.path.join(odir,makefile)
# Actual work starts here...
@@ -260,7 +255,7 @@ def main():
somevars[key] = makevars[key]
somevars['CFLAGS'] = string.join(cflags) # override
- files = ['$(OPT)', '$(LDFLAGS)', config_c, frozen_c] + \
+ files = ['$(OPT)', '$(LDFLAGS)', base_config_c, base_frozen_c] + \
supp_sources + addfiles + libs + \
['$(MODLIBS)', '$(LIBS)', '$(SYSLIBS)']
@@ -271,7 +266,7 @@ def main():
backup = None
outfp = open(makefile, 'w')
try:
- makemakefile.makemakefile(outfp, somevars, files, target)
+ makemakefile.makemakefile(outfp, somevars, files, base_target)
finally:
outfp.close()
if backup:
@@ -284,13 +279,17 @@ def main():
# Done!
- print 'Now run make to build the target:', target
+ if odir:
+ print 'Now run make in', odir,
+ print 'to build the target:', base_target
+ else:
+ print 'Now run make to build the target:', base_target
# Print usage message and exit
def usage(msg = None):
- sys.stderr.write(usage_msg)
+ sys.stderr.write(__doc__)
# Put the error last since the usage message scrolls off the screen
if msg:
sys.stderr.write('\nError: ' + str(msg) + '\n')