Removed unintentional trailing spaces in text files.

4 files changed, 25 insertions, 25 deletions

diff --git a/Tools/freeze/README b/Tools/freeze/README
index 81be2c8..5bc5b04 100644
--- a/Tools/freeze/README
+++ b/Tools/freeze/README
@@ -100,8 +100,8 @@ to place the Tcl and Tk library files in the distributed setup, and
 then declare these directories in your frozen Python program using
 the TCL_LIBRARY, TK_LIBRARY and TIX_LIBRARY environment variables.
 
-For example, assume you will ship your frozen program in the directory 
-<root>/bin/windows-x86 and will place your Tcl library files 
+For example, assume you will ship your frozen program in the directory
+<root>/bin/windows-x86 and will place your Tcl library files
 in <root>/lib/tcl8.2 and your Tk library files in <root>/lib/tk8.2. Then
 placing the following lines in your frozen Python script before importing
 Tkinter or Tix would set the environment correctly for Tcl/Tk/Tix:
@@ -138,8 +138,8 @@ variable PATH is consulted, and under Unix, it may be the
 environment variable LD_LIBRARY_PATH and/or the system
 shared library cache (ld.so). An additional preferred directory for
 finding the dynamic libraries is built into the .dll or .so files at
-compile time - see the LIB_RUNTIME_DIR variable in the Tcl makefile. 
-The OS must find the dynamic libraries or your frozen program won't start. 
+compile time - see the LIB_RUNTIME_DIR variable in the Tcl makefile.
+The OS must find the dynamic libraries or your frozen program won't start.
 Usually I make sure that the .so or .dll files are in the same directory
 as the executable, but this may not be foolproof.
 
@@ -149,8 +149,8 @@ incorporated in a frozen Python module as string literals and written
 to a temporary location when the program runs; this is currently left
 as an exercise for the reader.  An easier approach is to freeze the
 Tcl/Tk/Tix code into the dynamic libraries using the Tcl ET code,
-or the Tix Stand-Alone-Module code. Of course, you can also simply 
-require that Tcl/Tk is required on the target installation, but be 
+or the Tix Stand-Alone-Module code. Of course, you can also simply
+require that Tcl/Tk is required on the target installation, but be
 careful that the version corresponds.
 
 There are some caveats using frozen Tkinter applications:
@@ -164,7 +164,7 @@ program was frozen, not where it is run from.
 A warning about shared library modules
 --------------------------------------
 
-When your Python installation uses shared library modules such as 
+When your Python installation uses shared library modules such as
 _tkinter.pyd, these will not be incorporated in the frozen program.
  Again, the frozen program will work when you test it, but it won't
  work when you ship it to a site without a Python installation.
@@ -275,9 +275,9 @@ Options:
               are read and the -i option replaced with the parsed
               params (note - quoting args in this file is NOT supported)
 
--s subsystem: Specify the subsystem (For Windows only.); 
+-s subsystem: Specify the subsystem (For Windows only.);
               'console' (default), 'windows', 'service' or 'com_dll'
-              
+
 -w:           Toggle Windows (NT or 95) behavior.
               (For debugging only -- on a win32 platform, win32 behavior
               is automatic.)
diff --git a/Tools/pybench/README b/Tools/pybench/README
index e59e6c0..40f7eec 100644
--- a/Tools/pybench/README
+++ b/Tools/pybench/README
@@ -4,7 +4,7 @@ PYBENCH - A Python Benchmark Suite
 ________________________________________________________________________
 
      Extendable suite of low-level benchmarks for measuring
-          the performance of the Python implementation 
+          the performance of the Python implementation
                  (interpreter, compiler or VM).
 
 pybench is a collection of tests that provides a standardized way to
@@ -34,11 +34,11 @@ to have it store the results in a file too.
 
 It is usually a good idea to run pybench.py multiple times to see
 whether the environment, timers and benchmark run-times are suitable
-for doing benchmark tests. 
+for doing benchmark tests.
 
 You can use the comparison feature of pybench.py ('pybench.py -c
 <file>') to check how well the system behaves in comparison to a
-reference run. 
+reference run.
 
 If the differences are well below 10% for each test, then you have a
 system that is good for doing benchmark testings.  Of you get random
@@ -232,7 +232,7 @@ class IntegerCounting(Test):
     # for comparisons of benchmark runs - tests with unequal version
     # number will not get compared.
     version = 1.0
-    
+
     # The number of abstract operations done in each round of the
     # test. An operation is the basic unit of what you want to
     # measure. The benchmark will output the amount of run-time per
@@ -264,7 +264,7 @@ class IntegerCounting(Test):
 
             # Repeat the operations per round to raise the run-time
             # per operation significantly above the noise level of the
-            # for-loop overhead. 
+            # for-loop overhead.
 
 	    # Execute 20 operations (a += 1):
             a += 1
@@ -358,8 +358,8 @@ Version History
         - changed the output format a bit to make it look
           nicer
         - refactored the APIs somewhat
-  1.3+: Steve Holden added the NewInstances test and the filtering 
-       option during the NeedForSpeed sprint; this also triggered a long 
+  1.3+: Steve Holden added the NewInstances test and the filtering
+       option during the NeedForSpeed sprint; this also triggered a long
        discussion on how to improve benchmark timing and finally
        resulted in the release of 2.0
   1.3: initial checkin into the Python SVN repository
diff --git a/Tools/pynche/README b/Tools/pynche/README
index d20efc3..e026159 100644
--- a/Tools/pynche/README
+++ b/Tools/pynche/README
@@ -48,7 +48,7 @@ Running Standalone
 
     --initfile file
     -i file
-        Alternate location of the persistent initialization file.  See 
+        Alternate location of the persistent initialization file.  See
         the section on Persistency below.
 
     --ignore
@@ -80,7 +80,7 @@ Running as a Modal Dialog
 
         pyColorChooser.askcolor()
 
-    which will popup Pynche as a modal dialog, and return the selected 
+    which will popup Pynche as a modal dialog, and return the selected
     color.
 
     There are some UI differences when running as a modal
@@ -106,7 +106,7 @@ Running as a Modal Dialog
 
         master[*]
             the master window to use as the parent of the modal
-            dialog.  Without this argument, pyColorChooser will create 
+            dialog.  Without this argument, pyColorChooser will create
             its own Tkinter.Tk instance as the master.  This may not
             be what you want.
 
@@ -170,7 +170,7 @@ The Proof Window
     Selected chip color exactly matches the Nearest chip color, you
     will see the color name appear below the color specification for
     the Selected chip.
-    
+
     Clicking on the Nearest color chip selects that color.  Color
     distance is calculated in the 3D space of the RGB color solid and
     if more than one color name is the same distance from the selected
@@ -361,7 +361,7 @@ Color Name Database Files
     format for both values and names
 
     webcolors.txt -- The 140 color names that Tim Peters and his
-    sister say NS and MSIE both understand (with some controversy over 
+    sister say NS and MSIE both understand (with some controversy over
     AliceBlue).
 
     namedcolors.txt -- an alternative set of Netscape colors.
@@ -369,8 +369,8 @@ Color Name Database Files
     You can switch between files by choosing "Load palette..." from
     the "File" menu.  This brings up a standard Tk file dialog.
     Choose the file you want and then click "Ok".  If Pynche
-    understands the format in this file, it will load the database and 
-    update the appropriate windows.  If not, it will bring up an error 
+    understands the format in this file, it will load the database and
+    update the appropriate windows.  If not, it will bring up an error
     dialog.
 
 
diff --git a/Tools/unittestgui/README.txt b/Tools/unittestgui/README.txt
index 4d809df..0a477e1 100644
--- a/Tools/unittestgui/README.txt
+++ b/Tools/unittestgui/README.txt
@@ -1,5 +1,5 @@
-unittestgui.py is GUI framework and application for use with Python unit 
-testing framework. It executes tests written using the framework provided 
+unittestgui.py is GUI framework and application for use with Python unit
+testing framework. It executes tests written using the framework provided
 by the 'unittest' module.
 
 Based on the original by Steve Purcell, from: