diff options
58 files changed, 10664 insertions, 0 deletions
diff --git a/Lib/irix6/AL.py b/Lib/irix6/AL.py new file mode 100644 index 0000000..ed17cde --- /dev/null +++ b/Lib/irix6/AL.py @@ -0,0 +1,61 @@ +RATE_48000 = 48000 +RATE_44100 = 44100 +RATE_32000 = 32000 +RATE_22050 = 22050 +RATE_16000 = 16000 +RATE_11025 = 11025 +RATE_8000 = 8000 + +SAMPFMT_TWOSCOMP= 1 +SAMPFMT_FLOAT = 32 +SAMPFMT_DOUBLE = 64 + +SAMPLE_8 = 1 +SAMPLE_16 = 2 + # SAMPLE_24 is the low 24 bits of a long, sign extended to 32 bits +SAMPLE_24 = 4 + +MONO = 1 +STEREO = 2 +QUADRO = 4 # 4CHANNEL is not a legal Python name + +INPUT_LINE = 0 +INPUT_MIC = 1 +INPUT_DIGITAL = 2 + +MONITOR_OFF = 0 +MONITOR_ON = 1 + +ERROR_NUMBER = 0 +ERROR_TYPE = 1 +ERROR_LOCATION_LSP = 2 +ERROR_LOCATION_MSP = 3 +ERROR_LENGTH = 4 + +ERROR_INPUT_UNDERFLOW = 0 +ERROR_OUTPUT_OVERFLOW = 1 + +# These seem to be not supported anymore: +##HOLD, RELEASE = 0, 1 +##ATTAIL, ATHEAD, ATMARK, ATTIME = 0, 1, 2, 3 + +DEFAULT_DEVICE = 1 + +INPUT_SOURCE = 0 +LEFT_INPUT_ATTEN = 1 +RIGHT_INPUT_ATTEN = 2 +INPUT_RATE = 3 +OUTPUT_RATE = 4 +LEFT_SPEAKER_GAIN = 5 +RIGHT_SPEAKER_GAIN = 6 +INPUT_COUNT = 7 +OUTPUT_COUNT = 8 +UNUSED_COUNT = 9 +SYNC_INPUT_TO_AES = 10 +SYNC_OUTPUT_TO_AES = 11 +MONITOR_CTL = 12 +LEFT_MONITOR_ATTEN = 13 +RIGHT_MONITOR_ATTEN = 14 + +ENUM_VALUE = 0 # only certain values are valid +RANGE_VALUE = 1 # any value in range is valid diff --git a/Lib/irix6/AWARE.py b/Lib/irix6/AWARE.py new file mode 100644 index 0000000..30be50b --- /dev/null +++ b/Lib/irix6/AWARE.py @@ -0,0 +1,54 @@ +# +# Copyright (c) 1992 Aware, Inc. All rights reserved. +# +# Copyright Unpublished, Aware Inc. All Rights Reserved. +# This software contains proprietary and confidential +# information of Aware, Inc. Use, disclosure or +# reproduction is prohibited without the prior express +# written consent of Aware, Inc. +# +# + +# +# awareAudio.h - Aware Compression Library Parameter Header +# +# 01/21/92 Original Version by Brian Knittel and Jonathon Devine +# + +import CL + +# Aware Audio Specific Parameters - For both MPEG Audio and Multirate +CL.CHANNEL_POLICY = CL.NUMBER_OF_PARAMS + 0 +CL.NOISE_MARGIN = CL.NUMBER_OF_PARAMS + 1 +CL.BITRATE_POLICY = CL.NUMBER_OF_PARAMS + 2 + +# Additional parameters for MPEG Audio +CL.BITRATE_TARGET = CL.NUMBER_OF_PARAMS + 3 +CL.LAYER = CL.NUMBER_OF_PARAMS + 4 + +# read/write for compression configuration +# read for state during compression/decompression + +# +# Channel Policy +# +AWCMP_STEREO = 1 +AWCMP_JOINT_STEREO = 2 +AWCMP_INDEPENDENT = 3 + +# +# read/write for compression configuration, +# read for state during compression +# +# +# Bit-rate Policy +# +AWCMP_FIXED_RATE = 1 +AWCMP_CONST_QUAL = 2 +AWCMP_LOSSLESS = 4 + +# +# Layer values +# +AWCMP_MPEG_LAYER_I = 1 +AWCMP_MPEG_LAYER_II = 2 diff --git a/Lib/irix6/CD.py b/Lib/irix6/CD.py new file mode 100644 index 0000000..ad56561 --- /dev/null +++ b/Lib/irix6/CD.py @@ -0,0 +1,34 @@ +ERROR = 0 +NODISC = 1 +READY = 2 +PLAYING = 3 +PAUSED = 4 +STILL = 5 + +AUDIO = 0 +PNUM = 1 +INDEX = 2 +PTIME = 3 +ATIME = 4 +CATALOG = 5 +IDENT = 6 +CONTROL = 7 + +CDDA_DATASIZE = 2352 + +##CDDA_SUBCODESIZE = (sizeof(struct subcodeQ)) +##CDDA_BLOCKSIZE = (sizeof(struct cdframe)) +##CDDA_NUMSAMPLES = (CDDA_DATASIZE/2) +## +##CDQ_PREEMP_MASK = 0xd +##CDQ_COPY_MASK = 0xb +##CDQ_DDATA_MASK = 0xd +##CDQ_BROADCAST_MASK = 0x8 +##CDQ_PREEMPHASIS = 0x1 +##CDQ_COPY_PERMITTED = 0x2 +##CDQ_DIGITAL_DATA = 0x4 +##CDQ_BROADCAST_USE = 0x8 +## +##CDQ_MODE1 = 0x1 +##CDQ_MODE2 = 0x2 +##CDQ_MODE3 = 0x3 diff --git a/Lib/irix6/CL.py b/Lib/irix6/CL.py new file mode 100644 index 0000000..468ecaa --- /dev/null +++ b/Lib/irix6/CL.py @@ -0,0 +1,24 @@ +# Backward compatible module CL. +# All relevant symbols are now defined in the module cl. +try: + from cl import * +except ImportError: + from CL_old import * +else: + del CompressImage + del DecompressImage + del GetAlgorithmName + del OpenCompressor + del OpenDecompressor + del QueryAlgorithms + del QueryMaxHeaderSize + del QueryScheme + del QuerySchemeFromName + del SetDefault + del SetMax + del SetMin + try: + del cvt_type + except NameError: + pass + del error diff --git a/Lib/irix6/DEVICE.py b/Lib/irix6/DEVICE.py new file mode 100644 index 0000000..7ace8cb --- /dev/null +++ b/Lib/irix6/DEVICE.py @@ -0,0 +1,400 @@ +NULLDEV = 0 +BUTOFFSET = 1 +VALOFFSET = 256 +PSEUDOFFSET = 512 +BUT2OFFSET = 3840 +TIMOFFSET = 515 +XKBDOFFSET = 143 +BUTCOUNT = 255 +VALCOUNT = 256 +TIMCOUNT = 4 +XKBDCOUNT = 28 +USERBUTOFFSET = 4096 +USERVALOFFSET = 12288 +USERPSEUDOFFSET = 16384 +BUT0 = 1 +BUT1 = 2 +BUT2 = 3 +BUT3 = 4 +BUT4 = 5 +BUT5 = 6 +BUT6 = 7 +BUT7 = 8 +BUT8 = 9 +BUT9 = 10 +BUT10 = 11 +BUT11 = 12 +BUT12 = 13 +BUT13 = 14 +BUT14 = 15 +BUT15 = 16 +BUT16 = 17 +BUT17 = 18 +BUT18 = 19 +BUT19 = 20 +BUT20 = 21 +BUT21 = 22 +BUT22 = 23 +BUT23 = 24 +BUT24 = 25 +BUT25 = 26 +BUT26 = 27 +BUT27 = 28 +BUT28 = 29 +BUT29 = 30 +BUT30 = 31 +BUT31 = 32 +BUT32 = 33 +BUT33 = 34 +BUT34 = 35 +BUT35 = 36 +BUT36 = 37 +BUT37 = 38 +BUT38 = 39 +BUT39 = 40 +BUT40 = 41 +BUT41 = 42 +BUT42 = 43 +BUT43 = 44 +BUT44 = 45 +BUT45 = 46 +BUT46 = 47 +BUT47 = 48 +BUT48 = 49 +BUT49 = 50 +BUT50 = 51 +BUT51 = 52 +BUT52 = 53 +BUT53 = 54 +BUT54 = 55 +BUT55 = 56 +BUT56 = 57 +BUT57 = 58 +BUT58 = 59 +BUT59 = 60 +BUT60 = 61 +BUT61 = 62 +BUT62 = 63 +BUT63 = 64 +BUT64 = 65 +BUT65 = 66 +BUT66 = 67 +BUT67 = 68 +BUT68 = 69 +BUT69 = 70 +BUT70 = 71 +BUT71 = 72 +BUT72 = 73 +BUT73 = 74 +BUT74 = 75 +BUT75 = 76 +BUT76 = 77 +BUT77 = 78 +BUT78 = 79 +BUT79 = 80 +BUT80 = 81 +BUT81 = 82 +BUT82 = 83 +MAXKBDBUT = 83 +BUT100 = 101 +BUT101 = 102 +BUT102 = 103 +BUT103 = 104 +BUT104 = 105 +BUT105 = 106 +BUT106 = 107 +BUT107 = 108 +BUT108 = 109 +BUT109 = 110 +BUT110 = 111 +BUT111 = 112 +BUT112 = 113 +BUT113 = 114 +BUT114 = 115 +BUT115 = 116 +BUT116 = 117 +BUT117 = 118 +BUT118 = 119 +BUT119 = 120 +BUT120 = 121 +BUT121 = 122 +BUT122 = 123 +BUT123 = 124 +BUT124 = 125 +BUT125 = 126 +BUT126 = 127 +BUT127 = 128 +BUT128 = 129 +BUT129 = 130 +BUT130 = 131 +BUT131 = 132 +BUT132 = 133 +BUT133 = 134 +BUT134 = 135 +BUT135 = 136 +BUT136 = 137 +BUT137 = 138 +BUT138 = 139 +BUT139 = 140 +BUT140 = 141 +BUT141 = 142 +BUT142 = 143 +BUT143 = 144 +BUT144 = 145 +BUT145 = 146 +BUT146 = 147 +BUT147 = 148 +BUT148 = 149 +BUT149 = 150 +BUT150 = 151 +BUT151 = 152 +BUT152 = 153 +BUT153 = 154 +BUT154 = 155 +BUT155 = 156 +BUT156 = 157 +BUT157 = 158 +BUT158 = 159 +BUT159 = 160 +BUT160 = 161 +BUT161 = 162 +BUT162 = 163 +BUT163 = 164 +BUT164 = 165 +BUT165 = 166 +BUT166 = 167 +BUT167 = 168 +BUT168 = 169 +BUT181 = 182 +BUT182 = 183 +BUT183 = 184 +BUT184 = 185 +BUT185 = 186 +BUT186 = 187 +BUT187 = 188 +BUT188 = 189 +BUT189 = 190 +MOUSE1 = 101 +MOUSE2 = 102 +MOUSE3 = 103 +LEFTMOUSE = 103 +MIDDLEMOUSE = 102 +RIGHTMOUSE = 101 +LPENBUT = 104 +BPAD0 = 105 +BPAD1 = 106 +BPAD2 = 107 +BPAD3 = 108 +LPENVALID = 109 +SWBASE = 111 +SW0 = 111 +SW1 = 112 +SW2 = 113 +SW3 = 114 +SW4 = 115 +SW5 = 116 +SW6 = 117 +SW7 = 118 +SW8 = 119 +SW9 = 120 +SW10 = 121 +SW11 = 122 +SW12 = 123 +SW13 = 124 +SW14 = 125 +SW15 = 126 +SW16 = 127 +SW17 = 128 +SW18 = 129 +SW19 = 130 +SW20 = 131 +SW21 = 132 +SW22 = 133 +SW23 = 134 +SW24 = 135 +SW25 = 136 +SW26 = 137 +SW27 = 138 +SW28 = 139 +SW29 = 140 +SW30 = 141 +SW31 = 142 +SBBASE = 182 +SBPICK = 182 +SBBUT1 = 183 +SBBUT2 = 184 +SBBUT3 = 185 +SBBUT4 = 186 +SBBUT5 = 187 +SBBUT6 = 188 +SBBUT7 = 189 +SBBUT8 = 190 +AKEY = 11 +BKEY = 36 +CKEY = 28 +DKEY = 18 +EKEY = 17 +FKEY = 19 +GKEY = 26 +HKEY = 27 +IKEY = 40 +JKEY = 34 +KKEY = 35 +LKEY = 42 +MKEY = 44 +NKEY = 37 +OKEY = 41 +PKEY = 48 +QKEY = 10 +RKEY = 24 +SKEY = 12 +TKEY = 25 +UKEY = 33 +VKEY = 29 +WKEY = 16 +XKEY = 21 +YKEY = 32 +ZKEY = 20 +ZEROKEY = 46 +ONEKEY = 8 +TWOKEY = 14 +THREEKEY = 15 +FOURKEY = 22 +FIVEKEY = 23 +SIXKEY = 30 +SEVENKEY = 31 +EIGHTKEY = 38 +NINEKEY = 39 +BREAKKEY = 1 +SETUPKEY = 2 +CTRLKEY = 3 +LEFTCTRLKEY = CTRLKEY +CAPSLOCKKEY = 4 +RIGHTSHIFTKEY = 5 +LEFTSHIFTKEY = 6 +NOSCRLKEY = 13 +ESCKEY = 7 +TABKEY = 9 +RETKEY = 51 +SPACEKEY = 83 +LINEFEEDKEY = 60 +BACKSPACEKEY = 61 +DELKEY = 62 +SEMICOLONKEY = 43 +PERIODKEY = 52 +COMMAKEY = 45 +QUOTEKEY = 50 +ACCENTGRAVEKEY = 55 +MINUSKEY = 47 +VIRGULEKEY = 53 +BACKSLASHKEY = 57 +EQUALKEY = 54 +LEFTBRACKETKEY = 49 +RIGHTBRACKETKEY = 56 +LEFTARROWKEY = 73 +DOWNARROWKEY = 74 +RIGHTARROWKEY = 80 +UPARROWKEY = 81 +PAD0 = 59 +PAD1 = 58 +PAD2 = 64 +PAD3 = 65 +PAD4 = 63 +PAD5 = 69 +PAD6 = 70 +PAD7 = 67 +PAD8 = 68 +PAD9 = 75 +PADPF1 = 72 +PADPF2 = 71 +PADPF3 = 79 +PADPF4 = 78 +PADPERIOD = 66 +PADMINUS = 76 +PADCOMMA = 77 +PADENTER = 82 +LEFTALTKEY = 143 +RIGHTALTKEY = 144 +RIGHTCTRLKEY = 145 +F1KEY = 146 +F2KEY = 147 +F3KEY = 148 +F4KEY = 149 +F5KEY = 150 +F6KEY = 151 +F7KEY = 152 +F8KEY = 153 +F9KEY = 154 +F10KEY = 155 +F11KEY = 156 +F12KEY = 157 +PRINTSCREENKEY = 158 +SCROLLLOCKKEY = 159 +PAUSEKEY = 160 +INSERTKEY = 161 +HOMEKEY = 162 +PAGEUPKEY = 163 +ENDKEY = 164 +PAGEDOWNKEY = 165 +NUMLOCKKEY = 166 +PADVIRGULEKEY = 167 +PADASTERKEY = 168 +PADPLUSKEY = 169 +SGIRESERVED = 256 +DIAL0 = 257 +DIAL1 = 258 +DIAL2 = 259 +DIAL3 = 260 +DIAL4 = 261 +DIAL5 = 262 +DIAL6 = 263 +DIAL7 = 264 +DIAL8 = 265 +MOUSEX = 266 +MOUSEY = 267 +LPENX = 268 +LPENY = 269 +BPADX = 270 +BPADY = 271 +CURSORX = 272 +CURSORY = 273 +GHOSTX = 274 +GHOSTY = 275 +SBTX = 276 +SBTY = 277 +SBTZ = 278 +SBRX = 279 +SBRY = 280 +SBRZ = 281 +SBPERIOD = 282 +TIMER0 = 515 +TIMER1 = 516 +TIMER2 = 517 +TIMER3 = 518 +KEYBD = 513 +RAWKEYBD = 514 +VALMARK = 523 +REDRAW = 528 +INPUTCHANGE = 534 +QFULL = 535 +QREADERROR = 538 +WINFREEZE = 539 +WINTHAW = 540 +REDRAWICONIC = 541 +WINQUIT = 542 +DEPTHCHANGE = 543 +WINSHUT = 546 +DRAWOVERLAY = 547 +VIDEO = 548 +MENUBUTTON = RIGHTMOUSE +WINCLOSE = 537 +KEYBDFNAMES = 544 +KEYBDFSTRINGS = 545 +MAXSGIDEVICE = 20000 +GERROR = 524 +WMSEND = 529 +WMREPLY = 530 +WMGFCLOSE = 531 +WMTXCLOSE = 532 +MODECHANGE = 533 +PIECECHANGE = 536 diff --git a/Lib/irix6/ERRNO.py b/Lib/irix6/ERRNO.py new file mode 100644 index 0000000..d975ce6 --- /dev/null +++ b/Lib/irix6/ERRNO.py @@ -0,0 +1,163 @@ +# Generated by h2py from /usr/include/sys/errno.h + +# Included from standards.h +__KBASE = 1000 +__IRIXBASE = 1000 +EPERM = 1 +ENOENT = 2 +ESRCH = 3 +EINTR = 4 +EIO = 5 +ENXIO = 6 +E2BIG = 7 +ENOEXEC = 8 +EBADF = 9 +ECHILD = 10 +EAGAIN = 11 +ENOMEM = 12 +EACCES = 13 +EFAULT = 14 +ENOTBLK = 15 +EBUSY = 16 +EEXIST = 17 +EXDEV = 18 +ENODEV = 19 +ENOTDIR = 20 +EISDIR = 21 +EINVAL = 22 +ENFILE = 23 +EMFILE = 24 +ENOTTY = 25 +ETXTBSY = 26 +EFBIG = 27 +ENOSPC = 28 +ESPIPE = 29 +EROFS = 30 +EMLINK = 31 +EPIPE = 32 +EDOM = 33 +ERANGE = 34 +ENOMSG = 35 +EIDRM = 36 +ECHRNG = 37 +EL2NSYNC = 38 +EL3HLT = 39 +EL3RST = 40 +ELNRNG = 41 +EUNATCH = 42 +ENOCSI = 43 +EL2HLT = 44 +EDEADLK = 45 +ENOLCK = 46 +EBADE = 50 +EBADR = 51 +EXFULL = 52 +ENOANO = 53 +EBADRQC = 54 +EBADSLT = 55 +EDEADLOCK = 56 +EBFONT = 57 +ENOSTR = 60 +ENODATA = 61 +ETIME = 62 +ENOSR = 63 +ENONET = 64 +ENOPKG = 65 +EREMOTE = 66 +ENOLINK = 67 +EADV = 68 +ESRMNT = 69 +ECOMM = 70 +EPROTO = 71 +EMULTIHOP = 74 +EBADMSG = 77 +ENAMETOOLONG = 78 +EOVERFLOW = 79 +ENOTUNIQ = 80 +EBADFD = 81 +EREMCHG = 82 +ELIBACC = 83 +ELIBBAD = 84 +ELIBSCN = 85 +ELIBMAX = 86 +ELIBEXEC = 87 +EILSEQ = 88 +ENOSYS = 89 +ELOOP = 90 +ERESTART = 91 +ESTRPIPE = 92 +ENOTEMPTY = 93 +EUSERS = 94 +ENOTSOCK = 95 +EDESTADDRREQ = 96 +EMSGSIZE = 97 +EPROTOTYPE = 98 +ENOPROTOOPT = 99 +EPROTONOSUPPORT = 120 +ESOCKTNOSUPPORT = 121 +EOPNOTSUPP = 122 +EPFNOSUPPORT = 123 +EAFNOSUPPORT = 124 +EADDRINUSE = 125 +EADDRNOTAVAIL = 126 +ENETDOWN = 127 +ENETUNREACH = 128 +ENETRESET = 129 +ECONNABORTED = 130 +ECONNRESET = 131 +ENOBUFS = 132 +EISCONN = 133 +ENOTCONN = 134 +ESHUTDOWN = 143 +ETOOMANYREFS = 144 +ETIMEDOUT = 145 +ECONNREFUSED = 146 +EHOSTDOWN = 147 +EHOSTUNREACH = 148 +LASTERRNO = ENOTCONN +EWOULDBLOCK = __KBASE+101 +EWOULDBLOCK = EAGAIN +EALREADY = 149 +EINPROGRESS = 150 +ESTALE = 151 +EIORESID = 500 +EUCLEAN = 135 +ENOTNAM = 137 +ENAVAIL = 138 +EISNAM = 139 +EREMOTEIO = 140 +EINIT = 141 +EREMDEV = 142 +ECANCELED = 158 +ENOLIMFILE = 1001 +EPROCLIM = 1002 +EDISJOINT = 1003 +ENOLOGIN = 1004 +ELOGINLIM = 1005 +EGROUPLOOP = 1006 +ENOATTACH = 1007 +ENOTSUP = 1008 +ENOATTR = 1009 +EDIRCORRUPTED = 1010 +EDQUOT = 1133 +ENFSREMOTE = 1135 +ECONTROLLER = 1300 +ENOTCONTROLLER = 1301 +EENQUEUED = 1302 +ENOTENQUEUED = 1303 +EJOINED = 1304 +ENOTJOINED = 1305 +ENOPROC = 1306 +EMUSTRUN = 1307 +ENOTSTOPPED = 1308 +ECLOCKCPU = 1309 +EINVALSTATE = 1310 +ENOEXIST = 1311 +EENDOFMINOR = 1312 +EBUFSIZE = 1313 +EEMPTY = 1314 +ENOINTRGROUP = 1315 +EINVALMODE = 1316 +ECANTEXTENT = 1317 +EINVALTIME = 1318 +EDESTROYED = 1319 diff --git a/Lib/irix6/FCNTL.py b/Lib/irix6/FCNTL.py new file mode 100644 index 0000000..ceb1071 --- /dev/null +++ b/Lib/irix6/FCNTL.py @@ -0,0 +1,114 @@ +# Generated by h2py from /usr/include/sys/fcntl.h + +# Included from standards.h + +# Included from sys/types.h + +# Included from sgidefs.h +_MIPS_ISA_MIPS1 = 1 +_MIPS_ISA_MIPS2 = 2 +_MIPS_ISA_MIPS3 = 3 +_MIPS_ISA_MIPS4 = 4 +_MIPS_SIM_ABI32 = 1 +_MIPS_SIM_NABI32 = 2 +_MIPS_SIM_ABI64 = 3 +P_MYID = (-1) +P_MYHOSTID = (-1) + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 +FNDELAY = 0x04 +FAPPEND = 0x08 +FSYNC = 0x10 +FDSYNC = 0x20 +FRSYNC = 0x40 +FNONBLOCK = 0x80 +FASYNC = 0x1000 +FLARGEFILE = 0x2000 +FNONBLK = FNONBLOCK +FDIRECT = 0x8000 +FDIRENT64 = 0x8000 +FCREAT = 0x0100 +FTRUNC = 0x0200 +FEXCL = 0x0400 +FNOCTTY = 0x0800 +O_RDONLY = 0 +O_WRONLY = 1 +O_RDWR = 2 +O_NDELAY = 0x04 +O_APPEND = 0x08 +O_SYNC = 0x10 +O_DSYNC = 0x20 +O_RSYNC = 0x40 +O_NONBLOCK = 0x80 +O_LARGEFILE = 0x2000 +O_DIRECT = 0x8000 +O_CREAT = 0x100 +O_TRUNC = 0x200 +O_EXCL = 0x400 +O_NOCTTY = 0x800 +F_DUPFD = 0 +F_GETFD = 1 +F_SETFD = 2 +F_GETFL = 3 +F_SETFL = 4 +F_GETLK = 14 +F_SETLK = 6 +F_SETLKW = 7 +F_CHKFL = 8 +F_ALLOCSP = 10 +F_FREESP = 11 +F_SETBSDLK = 12 +F_SETBSDLKW = 13 +F_DIOINFO = 30 +F_FSGETXATTR = 31 +F_FSSETXATTR = 32 +F_GETLK64 = 33 +F_SETLK64 = 34 +F_SETLKW64 = 35 +F_ALLOCSP64 = 36 +F_FREESP64 = 37 +F_GETBMAP = 38 +F_FSSETDM = 39 +F_RESVSP = 40 +F_UNRESVSP = 41 +F_RESVSP64 = 42 +F_UNRESVSP64 = 43 +F_GETBMAPA = 44 +F_FSGETXATTRA = 45 +F_GETALLLK = 46 +F_RSETLK = 20 +F_RGETLK = 21 +F_RSETLKW = 22 +F_GETOWN = 23 +F_SETOWN = 24 +F_RDLCK = 01 +F_WRLCK = 02 +F_UNLCK = 03 +O_ACCMODE = 3 +FD_CLOEXEC = 1 +FD_NODUP_FORK = 4 diff --git a/Lib/irix6/FILE.py b/Lib/irix6/FILE.py new file mode 100644 index 0000000..e3393b6 --- /dev/null +++ b/Lib/irix6/FILE.py @@ -0,0 +1,236 @@ +# Generated by h2py from /usr/include/sys/file.h + +# Included from standards.h + +# Included from sys/types.h + +# Included from sgidefs.h +_MIPS_ISA_MIPS1 = 1 +_MIPS_ISA_MIPS2 = 2 +_MIPS_ISA_MIPS3 = 3 +_MIPS_ISA_MIPS4 = 4 +_MIPS_SIM_ABI32 = 1 +_MIPS_SIM_NABI32 = 2 +_MIPS_SIM_ABI64 = 3 +P_MYID = (-1) +P_MYHOSTID = (-1) + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 + +# Included from sys/sema.h +MUTEX_DEFAULT = 0x0 +METER_NAMSZ = 8 +def mutex_spinlock(l): return splhi() + +def mutex_spintrylock(l): return splhi() + +def spinlock_islocked(l): return issplhi(getsr()) + +def spinlock_initialized(l): return 1 + +SV_FIFO = 0x0 +SV_LIFO = 0x2 +SV_PRIO = 0x4 +SV_DEFAULT = SV_FIFO +SEMA_NOHIST = 0x0001 +SEMA_LOCK = 0x0004 +SEMA_METER = 0x0008 +SEMA_NAMSZ = METER_NAMSZ +MR_ACCESS = 0x1 +MR_UPDATE = 0x2 +def mp_mutex_unlock(m): return mutex_unlock(m) + +def mp_mutex_trylock(m): return mutex_trylock(m) + +def mp_mutex_spinlock(m): return mutex_spinlock(m) + +def mp_mutex_trylock(m): return 1 + +def mp_mutex_spinlock(m): return 1 + +def nested_spintrylock(m): return 1 + +def mp_mrunlock(a): return mrunlock(a) + +def mp_cpsema(x): return cpsema(x) + +def mp_cvsema(x): return cvsema(x) + +def mp_cpsema(x): return 1 + +def mp_cvsema(x): return 0 + +MON_LOCKED = 0x01 +MON_WAITING = 0x02 +MON_TIMEOUT = 0x04 +def initlock(l): return spinlock_init(l,0) + +def ownlock(x): return 1 + +def splock(x): return 1 + +def io_splock(x): return 1 + +def mutex_enter(m): return mutex_lock(m, PZERO) + +def mutex_tryenter(m): return mutex_trylock(m) + +def mutex_exit(m): return mutex_unlock(m) + +def cv_signal(cv): return sv_signal(cv) + +def cv_broadcast(cv): return sv_broadcast(cv) + +def cv_destroy(cv): return sv_destroy(cv) + +RW_READER = MR_ACCESS +RW_WRITER = MR_UPDATE +def rw_exit(r): return mrunlock(r) + +def rw_tryupgrade(r): return cmrpromote(r) + +def rw_downgrade(r): return mrdemote(r) + +def rw_destroy(r): return mrfree(r) + +def RW_WRITE_HELD(r): return ismrlocked(r, MR_UPDATE) + +def RW_READ_HELD(r): return ismrlocked(r, MR_ACCESS) + + +# Included from sys/fcntl.h +FNDELAY = 0x04 +FAPPEND = 0x08 +FSYNC = 0x10 +FDSYNC = 0x20 +FRSYNC = 0x40 +FNONBLOCK = 0x80 +FASYNC = 0x1000 +FLARGEFILE = 0x2000 +FNONBLK = FNONBLOCK +FDIRECT = 0x8000 +FDIRENT64 = 0x8000 +FCREAT = 0x0100 +FTRUNC = 0x0200 +FEXCL = 0x0400 +FNOCTTY = 0x0800 +O_RDONLY = 0 +O_WRONLY = 1 +O_RDWR = 2 +O_NDELAY = 0x04 +O_APPEND = 0x08 +O_SYNC = 0x10 +O_DSYNC = 0x20 +O_RSYNC = 0x40 +O_NONBLOCK = 0x80 +O_LARGEFILE = 0x2000 +O_DIRECT = 0x8000 +O_CREAT = 0x100 +O_TRUNC = 0x200 +O_EXCL = 0x400 +O_NOCTTY = 0x800 +F_DUPFD = 0 +F_GETFD = 1 +F_SETFD = 2 +F_GETFL = 3 +F_SETFL = 4 +F_GETLK = 14 +F_SETLK = 6 +F_SETLKW = 7 +F_CHKFL = 8 +F_ALLOCSP = 10 +F_FREESP = 11 +F_SETBSDLK = 12 +F_SETBSDLKW = 13 +F_DIOINFO = 30 +F_FSGETXATTR = 31 +F_FSSETXATTR = 32 +F_GETLK64 = 33 +F_SETLK64 = 34 +F_SETLKW64 = 35 +F_ALLOCSP64 = 36 +F_FREESP64 = 37 +F_GETBMAP = 38 +F_FSSETDM = 39 +F_RESVSP = 40 +F_UNRESVSP = 41 +F_RESVSP64 = 42 +F_UNRESVSP64 = 43 +F_GETBMAPA = 44 +F_FSGETXATTRA = 45 +F_GETALLLK = 46 +F_RSETLK = 20 +F_RGETLK = 21 +F_RSETLKW = 22 +F_GETOWN = 23 +F_SETOWN = 24 +F_RDLCK = 01 +F_WRLCK = 02 +F_UNLCK = 03 +O_ACCMODE = 3 +FD_CLOEXEC = 1 +FD_NODUP_FORK = 4 +FMASK = 0x90FF +FOPEN = 0xFFFFFFFF +FREAD = 0x01 +FWRITE = 0x02 +FNDELAY = 0x04 +FAPPEND = 0x08 +FSYNC = 0x10 +FDSYNC = 0x20 +FRSYNC = 0x40 +FNONBLOCK = 0x80 +FASYNC = 0x1000 +FNONBLK = FNONBLOCK +FLARGEFILE = 0x2000 +FDIRECT = 0x8000 +FCREAT = 0x0100 +FTRUNC = 0x0200 +FEXCL = 0x0400 +FNOCTTY = 0x0800 +FMARK = 0x4000 +FDEFER = 0x2000 +FINPROGRESS = 0x0400 +FINVIS = 0x0100 +FNMFS = 0x2000 +FDIRENT64 = 0x8000 +FCLOSEXEC = 001 +FDSHD = 0x0001 +FDNOMARK = 0x0002 +FDIGNPROGRESS = 0x0004 +LOCK_SH = 1 +LOCK_EX = 2 +LOCK_NB = 4 +LOCK_UN = 8 +F_OK = 0 +X_OK = 1 +W_OK = 2 +R_OK = 4 +L_SET = 0 +L_INCR = 1 +L_XTND = 2 diff --git a/Lib/irix6/FL.py b/Lib/irix6/FL.py new file mode 100644 index 0000000..f85237b --- /dev/null +++ b/Lib/irix6/FL.py @@ -0,0 +1,289 @@ +# Constants used by the FORMS library (module fl). +# This corresponds to "forms.h". +# Recommended use: import FL; ... FL.NORMAL_BOX ... etc. +# Alternate use: from FL import *; ... NORMAL_BOX ... etc. + +_v20 = 1 +_v21 = 1 +##import fl +##try: +## _v20 = (fl.get_rgbmode <> None) +##except: +## _v20 = 0 +##del fl + +NULL = 0 +FALSE = 0 +TRUE = 1 + +EVENT = -1 + +LABEL_SIZE = 64 +if _v20: + SHORTCUT_SIZE = 32 +PLACE_FREE = 0 +PLACE_SIZE = 1 +PLACE_ASPECT = 2 +PLACE_MOUSE = 3 +PLACE_CENTER = 4 +PLACE_POSITION = 5 +FL_PLACE_FULLSCREEN = 6 +FIND_INPUT = 0 +FIND_AUTOMATIC = 1 +FIND_MOUSE = 2 +BEGIN_GROUP = 10000 +END_GROUP = 20000 +ALIGN_TOP = 0 +ALIGN_BOTTOM = 1 +ALIGN_LEFT = 2 +ALIGN_RIGHT = 3 +ALIGN_CENTER = 4 +NO_BOX = 0 +UP_BOX = 1 +DOWN_BOX = 2 +FLAT_BOX = 3 +BORDER_BOX = 4 +SHADOW_BOX = 5 +FRAME_BOX = 6 +ROUNDED_BOX = 7 +RFLAT_BOX = 8 +RSHADOW_BOX = 9 +TOP_BOUND_COL = 51 +LEFT_BOUND_COL = 55 +BOT_BOUND_COL = 40 +RIGHT_BOUND_COL = 35 +COL1 = 47 +MCOL = 49 +LCOL = 0 +BOUND_WIDTH = 3.0 +DRAW = 0 +PUSH = 1 +RELEASE = 2 +ENTER = 3 +LEAVE = 4 +MOUSE = 5 +FOCUS = 6 +UNFOCUS = 7 +KEYBOARD = 8 +STEP = 9 +MOVE = 10 +FONT_NAME = 'Helvetica' +FONT_BOLDNAME = 'Helvetica-Bold' +FONT_ITALICNAME = 'Helvetica-Oblique' +FONT_FIXEDNAME = 'Courier' +FONT_ICONNAME = 'Icon' +SMALL_FONT = 8.0 +NORMAL_FONT = 11.0 +LARGE_FONT = 20.0 +NORMAL_STYLE = 0 +BOLD_STYLE = 1 +ITALIC_STYLE = 2 +FIXED_STYLE = 3 +ENGRAVED_STYLE = 4 +ICON_STYLE = 5 +BITMAP = 3 +NORMAL_BITMAP = 0 +BITMAP_BOXTYPE = NO_BOX +BITMAP_COL1 = 0 +BITMAP_COL2 = COL1 +BITMAP_LCOL = LCOL +BITMAP_ALIGN = ALIGN_BOTTOM +BITMAP_MAXSIZE = 128*128 +BITMAP_BW = BOUND_WIDTH +BOX = 1 +BOX_BOXTYPE = UP_BOX +BOX_COL1 = COL1 +BOX_LCOL = LCOL +BOX_ALIGN = ALIGN_CENTER +BOX_BW = BOUND_WIDTH +BROWSER = 71 +NORMAL_BROWSER = 0 +SELECT_BROWSER = 1 +HOLD_BROWSER = 2 +MULTI_BROWSER = 3 +BROWSER_BOXTYPE = DOWN_BOX +BROWSER_COL1 = COL1 +BROWSER_COL2 = 3 +BROWSER_LCOL = LCOL +BROWSER_ALIGN = ALIGN_BOTTOM +BROWSER_SLCOL = COL1 +BROWSER_BW = BOUND_WIDTH +BROWSER_LINELENGTH = 128 +BROWSER_MAXLINE = 512 +BUTTON = 11 +NORMAL_BUTTON = 0 +PUSH_BUTTON = 1 +RADIO_BUTTON = 2 +HIDDEN_BUTTON = 3 +TOUCH_BUTTON = 4 +INOUT_BUTTON = 5 +RETURN_BUTTON = 6 +if _v20: + HIDDEN_RET_BUTTON = 7 +BUTTON_BOXTYPE = UP_BOX +BUTTON_COL1 = COL1 +BUTTON_COL2 = COL1 +BUTTON_LCOL = LCOL +BUTTON_ALIGN = ALIGN_CENTER +BUTTON_MCOL1 = MCOL +BUTTON_MCOL2 = MCOL +BUTTON_BW = BOUND_WIDTH +if _v20: + CHART = 4 + BAR_CHART = 0 + HORBAR_CHART = 1 + LINE_CHART = 2 + FILLED_CHART = 3 + SPIKE_CHART = 4 + PIE_CHART = 5 + SPECIALPIE_CHART = 6 + CHART_BOXTYPE = BORDER_BOX + CHART_COL1 = COL1 + CHART_LCOL = LCOL + CHART_ALIGN = ALIGN_BOTTOM + CHART_BW = BOUND_WIDTH + CHART_MAX = 128 +CHOICE = 42 +NORMAL_CHOICE = 0 +CHOICE_BOXTYPE = DOWN_BOX +CHOICE_COL1 = COL1 +CHOICE_COL2 = LCOL +CHOICE_LCOL = LCOL +CHOICE_ALIGN = ALIGN_LEFT +CHOICE_BW = BOUND_WIDTH +CHOICE_MCOL = MCOL +CHOICE_MAXITEMS = 128 +CHOICE_MAXSTR = 64 +CLOCK = 61 +SQUARE_CLOCK = 0 +ROUND_CLOCK = 1 +CLOCK_BOXTYPE = UP_BOX +CLOCK_COL1 = 37 +CLOCK_COL2 = 42 +CLOCK_LCOL = LCOL +CLOCK_ALIGN = ALIGN_BOTTOM +CLOCK_TOPCOL = COL1 +CLOCK_BW = BOUND_WIDTH +COUNTER = 25 +NORMAL_COUNTER = 0 +SIMPLE_COUNTER = 1 +COUNTER_BOXTYPE = UP_BOX +COUNTER_COL1 = COL1 +COUNTER_COL2 = 4 +COUNTER_LCOL = LCOL +COUNTER_ALIGN = ALIGN_BOTTOM +if _v20: + COUNTER_BW = BOUND_WIDTH +else: + DEFAULT = 51 + RETURN_DEFAULT = 0 + ALWAYS_DEFAULT = 1 +DIAL = 22 +NORMAL_DIAL = 0 +LINE_DIAL = 1 +DIAL_BOXTYPE = NO_BOX +DIAL_COL1 = COL1 +DIAL_COL2 = 37 +DIAL_LCOL = LCOL +DIAL_ALIGN = ALIGN_BOTTOM +DIAL_TOPCOL = COL1 +DIAL_BW = BOUND_WIDTH +FREE = 101 +NORMAL_FREE = 1 +SLEEPING_FREE = 2 +INPUT_FREE = 3 +CONTINUOUS_FREE = 4 +ALL_FREE = 5 +INPUT = 31 +NORMAL_INPUT = 0 +if _v20: + FLOAT_INPUT = 1 + INT_INPUT = 2 + HIDDEN_INPUT = 3 + if _v21: + MULTILINE_INPUT = 4 + SECRET_INPUT = 5 +else: + ALWAYS_INPUT = 1 +INPUT_BOXTYPE = DOWN_BOX +INPUT_COL1 = 13 +INPUT_COL2 = 5 +INPUT_LCOL = LCOL +INPUT_ALIGN = ALIGN_LEFT +INPUT_TCOL = LCOL +INPUT_CCOL = 4 +INPUT_BW = BOUND_WIDTH +INPUT_MAX = 128 +LIGHTBUTTON = 12 +LIGHTBUTTON_BOXTYPE = UP_BOX +LIGHTBUTTON_COL1 = 39 +LIGHTBUTTON_COL2 = 3 +LIGHTBUTTON_LCOL = LCOL +LIGHTBUTTON_ALIGN = ALIGN_CENTER +LIGHTBUTTON_TOPCOL = COL1 +LIGHTBUTTON_MCOL = MCOL +LIGHTBUTTON_BW1 = BOUND_WIDTH +LIGHTBUTTON_BW2 = BOUND_WIDTH/2.0 +LIGHTBUTTON_MINSIZE = 12.0 +MENU = 41 +TOUCH_MENU = 0 +PUSH_MENU = 1 +MENU_BOXTYPE = BORDER_BOX +MENU_COL1 = 55 +MENU_COL2 = 37 +MENU_LCOL = LCOL +MENU_ALIGN = ALIGN_CENTER +MENU_BW = BOUND_WIDTH +MENU_MAX = 300 +POSITIONER = 23 +NORMAL_POSITIONER = 0 +POSITIONER_BOXTYPE = DOWN_BOX +POSITIONER_COL1 = COL1 +POSITIONER_COL2 = 1 +POSITIONER_LCOL = LCOL +POSITIONER_ALIGN = ALIGN_BOTTOM +POSITIONER_BW = BOUND_WIDTH +ROUNDBUTTON = 13 +ROUNDBUTTON_BOXTYPE = NO_BOX +ROUNDBUTTON_COL1 = 7 +ROUNDBUTTON_COL2 = 3 +ROUNDBUTTON_LCOL = LCOL +ROUNDBUTTON_ALIGN = ALIGN_CENTER +ROUNDBUTTON_TOPCOL = COL1 +ROUNDBUTTON_MCOL = MCOL +ROUNDBUTTON_BW = BOUND_WIDTH +SLIDER = 21 +VALSLIDER = 24 +VERT_SLIDER = 0 +HOR_SLIDER = 1 +VERT_FILL_SLIDER = 2 +HOR_FILL_SLIDER = 3 +VERT_NICE_SLIDER = 4 +HOR_NICE_SLIDER = 5 +SLIDER_BOXTYPE = DOWN_BOX +SLIDER_COL1 = COL1 +SLIDER_COL2 = COL1 +SLIDER_LCOL = LCOL +SLIDER_ALIGN = ALIGN_BOTTOM +SLIDER_BW1 = BOUND_WIDTH +SLIDER_BW2 = BOUND_WIDTH*0.75 +SLIDER_FINE = 0.05 +SLIDER_WIDTH = 0.08 +TEXT = 2 +NORMAL_TEXT = 0 +TEXT_BOXTYPE = NO_BOX +TEXT_COL1 = COL1 +TEXT_LCOL = LCOL +TEXT_ALIGN = ALIGN_LEFT +TEXT_BW = BOUND_WIDTH +TIMER = 62 +NORMAL_TIMER = 0 +VALUE_TIMER = 1 +HIDDEN_TIMER = 2 +TIMER_BOXTYPE = DOWN_BOX +TIMER_COL1 = COL1 +TIMER_COL2 = 1 +TIMER_LCOL = LCOL +TIMER_ALIGN = ALIGN_CENTER +TIMER_BW = BOUND_WIDTH +TIMER_BLINKRATE = 0.2 diff --git a/Lib/irix6/GET.py b/Lib/irix6/GET.py new file mode 100644 index 0000000..9c3d7d6 --- /dev/null +++ b/Lib/irix6/GET.py @@ -0,0 +1,59 @@ +# Symbols from <gl/get.h> + +BCKBUFFER = 0x1 +FRNTBUFFER = 0x2 +DRAWZBUFFER = 0x4 +DMRGB = 0 +DMSINGLE = 1 +DMDOUBLE = 2 +DMRGBDOUBLE = 5 +HZ30 = 0 +HZ60 = 1 +NTSC = 2 +HDTV = 3 +VGA = 4 +IRIS3K = 5 +PR60 = 6 +PAL = 9 +HZ30_SG = 11 +A343 = 14 +STR_RECT = 15 +VOF0 = 16 +VOF1 = 17 +VOF2 = 18 +VOF3 = 19 +SGI0 = 20 +SGI1 = 21 +SGI2 = 22 +HZ72 = 23 +GL_VIDEO_REG = 0x00800000 +GLV_GENLOCK = 0x00000001 +GLV_UNBLANK = 0x00000002 +GLV_SRED = 0x00000004 +GLV_SGREEN = 0x00000008 +GLV_SBLUE = 0x00000010 +GLV_SALPHA = 0x00000020 +GLV_TTLGENLOCK = 0x00000080 +GLV_TTLSYNC = GLV_TTLGENLOCK +GLV_GREENGENLOCK = 0x0000100 +LEFTPLANE = 0x0001 +RIGHTPLANE = 0x0002 +BOTTOMPLANE = 0x0004 +TOPPLANE = 0x0008 +NEARPLANE = 0x0010 +FARPLANE = 0x0020 +## GETDEF = __GL_GET_H__ +NOBUFFER = 0x0 +BOTHBUFFERS = 0x3 +DMINTENSITYSINGLE = 3 +DMINTENSITYDOUBLE = 4 +MONSPECIAL = 0x20 +HZ50 = 3 +MONA = 5 +MONB = 6 +MONC = 7 +MOND = 8 +MON_ALL = 12 +MON_GEN_ALL = 13 +CMAPMULTI = 0 +CMAPONE = 1 diff --git a/Lib/irix6/GL.py b/Lib/irix6/GL.py new file mode 100644 index 0000000..9f02f65 --- /dev/null +++ b/Lib/irix6/GL.py @@ -0,0 +1,393 @@ +NULL = 0 +FALSE = 0 +TRUE = 1 +ATTRIBSTACKDEPTH = 10 +VPSTACKDEPTH = 8 +MATRIXSTACKDEPTH = 32 +NAMESTACKDEPTH = 1025 +STARTTAG = -2 +ENDTAG = -3 +BLACK = 0 +RED = 1 +GREEN = 2 +YELLOW = 3 +BLUE = 4 +MAGENTA = 5 +CYAN = 6 +WHITE = 7 +PUP_CLEAR = 0 +PUP_COLOR = 1 +PUP_BLACK = 2 +PUP_WHITE = 3 +NORMALDRAW = 0x010 +PUPDRAW = 0x020 +OVERDRAW = 0x040 +UNDERDRAW = 0x080 +CURSORDRAW = 0x100 +DUALDRAW = 0x200 +PATTERN_16 = 16 +PATTERN_32 = 32 +PATTERN_64 = 64 +PATTERN_16_SIZE = 16 +PATTERN_32_SIZE = 64 +PATTERN_64_SIZE = 256 +SRC_AUTO = 0 +SRC_FRONT = 1 +SRC_BACK = 2 +SRC_ZBUFFER = 3 +SRC_PUP = 4 +SRC_OVER = 5 +SRC_UNDER = 6 +SRC_FRAMEGRABBER = 7 +BF_ZERO = 0 +BF_ONE = 1 +BF_DC = 2 +BF_SC = 2 +BF_MDC = 3 +BF_MSC = 3 +BF_SA = 4 +BF_MSA = 5 +BF_DA = 6 +BF_MDA = 7 +BF_MIN_SA_MDA = 8 +AF_NEVER = 0 +AF_LESS = 1 +AF_EQUAL = 2 +AF_LEQUAL = 3 +AF_GREATER = 4 +AF_NOTEQUAL = 5 +AF_GEQUAL = 6 +AF_ALWAYS = 7 +ZF_NEVER = 0 +ZF_LESS = 1 +ZF_EQUAL = 2 +ZF_LEQUAL = 3 +ZF_GREATER = 4 +ZF_NOTEQUAL = 5 +ZF_GEQUAL = 6 +ZF_ALWAYS = 7 +ZSRC_DEPTH = 0 +ZSRC_COLOR = 1 +SMP_OFF = 0x0 +SMP_ON = 0x1 +SMP_SMOOTHER = 0x2 +SML_OFF = 0x0 +SML_ON = 0x1 +SML_SMOOTHER = 0x2 +SML_END_CORRECT = 0x4 +PYSM_OFF = 0 +PYSM_ON = 1 +PYSM_SHRINK = 2 +DT_OFF = 0 +DT_ON = 1 +PUP_NONE = 0 +PUP_GREY = 0x1 +PUP_BOX = 0x2 +PUP_CHECK = 0x4 +GLC_OLDPOLYGON = 0 +GLC_ZRANGEMAP = 1 +GLC_MQUEUERATE = 2 +GLC_SOFTATTACH = 3 +GLC_MANAGEBG = 4 +GLC_SLOWMAPCOLORS = 5 +GLC_INPUTCHANGEBUG = 6 +GLC_NOBORDERBUG = 7 +GLC_SET_VSYNC = 8 +GLC_GET_VSYNC = 9 +GLC_VSYNC_SLEEP = 10 +GLC_COMPATRATE = 15 +C16X1 = 0 +C16X2 = 1 +C32X1 = 2 +C32X2 = 3 +CCROSS = 4 +FLAT = 0 +GOURAUD = 1 +LO_ZERO = 0x0 +LO_AND = 0x1 +LO_ANDR = 0x2 +LO_SRC = 0x3 +LO_ANDI = 0x4 +LO_DST = 0x5 +LO_XOR = 0x6 +LO_OR = 0x7 +LO_NOR = 0x8 +LO_XNOR = 0x9 +LO_NDST = 0xa +LO_ORR = 0xb +LO_NSRC = 0xc +LO_ORI = 0xd +LO_NAND = 0xe +LO_ONE = 0xf +INFOCUSSCRN = -2 +ST_KEEP = 0 +ST_ZERO = 1 +ST_REPLACE = 2 +ST_INCR = 3 +ST_DECR = 4 +ST_INVERT = 5 +SF_NEVER = 0 +SF_LESS = 1 +SF_EQUAL = 2 +SF_LEQUAL = 3 +SF_GREATER = 4 +SF_NOTEQUAL = 5 +SF_GEQUAL = 6 +SF_ALWAYS = 7 +SS_OFF = 0 +SS_DEPTH = 1 +PYM_FILL = 1 +PYM_POINT = 2 +PYM_LINE = 3 +PYM_HOLLOW = 4 +PYM_LINE_FAST = 5 +FG_OFF = 0 +FG_ON = 1 +FG_DEFINE = 2 +FG_VTX_EXP = 2 +FG_VTX_LIN = 3 +FG_PIX_EXP = 4 +FG_PIX_LIN = 5 +FG_VTX_EXP2 = 6 +FG_PIX_EXP2 = 7 +PM_SHIFT = 0 +PM_EXPAND = 1 +PM_C0 = 2 +PM_C1 = 3 +PM_ADD24 = 4 +PM_SIZE = 5 +PM_OFFSET = 6 +PM_STRIDE = 7 +PM_TTOB = 8 +PM_RTOL = 9 +PM_ZDATA = 10 +PM_WARP = 11 +PM_RDX = 12 +PM_RDY = 13 +PM_CDX = 14 +PM_CDY = 15 +PM_XSTART = 16 +PM_YSTART = 17 +PM_VO1 = 1000 +NAUTO = 0 +NNORMALIZE = 1 +AC_CLEAR = 0 +AC_ACCUMULATE = 1 +AC_CLEAR_ACCUMULATE = 2 +AC_RETURN = 3 +AC_MULT = 4 +AC_ADD = 5 +CP_OFF = 0 +CP_ON = 1 +CP_DEFINE = 2 +SB_RESET = 0 +SB_TRACK = 1 +SB_HOLD = 2 +RD_FREEZE = 0x00000001 +RD_ALPHAONE = 0x00000002 +RD_IGNORE_UNDERLAY = 0x00000004 +RD_IGNORE_OVERLAY = 0x00000008 +RD_IGNORE_PUP = 0x00000010 +RD_OFFSCREEN = 0x00000020 +GD_XPMAX = 0 +GD_YPMAX = 1 +GD_XMMAX = 2 +GD_YMMAX = 3 +GD_ZMIN = 4 +GD_ZMAX = 5 +GD_BITS_NORM_SNG_RED = 6 +GD_BITS_NORM_SNG_GREEN = 7 +GD_BITS_NORM_SNG_BLUE = 8 +GD_BITS_NORM_DBL_RED = 9 +GD_BITS_NORM_DBL_GREEN = 10 +GD_BITS_NORM_DBL_BLUE = 11 +GD_BITS_NORM_SNG_CMODE = 12 +GD_BITS_NORM_DBL_CMODE = 13 +GD_BITS_NORM_SNG_MMAP = 14 +GD_BITS_NORM_DBL_MMAP = 15 +GD_BITS_NORM_ZBUFFER = 16 +GD_BITS_OVER_SNG_CMODE = 17 +GD_BITS_UNDR_SNG_CMODE = 18 +GD_BITS_PUP_SNG_CMODE = 19 +GD_BITS_NORM_SNG_ALPHA = 21 +GD_BITS_NORM_DBL_ALPHA = 22 +GD_BITS_CURSOR = 23 +GD_OVERUNDER_SHARED = 24 +GD_BLEND = 25 +GD_CIFRACT = 26 +GD_CROSSHAIR_CINDEX = 27 +GD_DITHER = 28 +GD_LINESMOOTH_CMODE = 30 +GD_LINESMOOTH_RGB = 31 +GD_LOGICOP = 33 +GD_NSCRNS = 35 +GD_NURBS_ORDER = 36 +GD_NBLINKS = 37 +GD_NVERTEX_POLY = 39 +GD_PATSIZE_64 = 40 +GD_PNTSMOOTH_CMODE = 41 +GD_PNTSMOOTH_RGB = 42 +GD_PUP_TO_OVERUNDER = 43 +GD_READSOURCE = 44 +GD_READSOURCE_ZBUFFER = 48 +GD_STEREO = 50 +GD_SUBPIXEL_LINE = 51 +GD_SUBPIXEL_PNT = 52 +GD_SUBPIXEL_POLY = 53 +GD_TRIMCURVE_ORDER = 54 +GD_WSYS = 55 +GD_ZDRAW_GEOM = 57 +GD_ZDRAW_PIXELS = 58 +GD_SCRNTYPE = 61 +GD_TEXTPORT = 62 +GD_NMMAPS = 63 +GD_FRAMEGRABBER = 64 +GD_TIMERHZ = 66 +GD_DBBOX = 67 +GD_AFUNCTION = 68 +GD_ALPHA_OVERUNDER = 69 +GD_BITS_ACBUF = 70 +GD_BITS_ACBUF_HW = 71 +GD_BITS_STENCIL = 72 +GD_CLIPPLANES = 73 +GD_FOGVERTEX = 74 +GD_LIGHTING_TWOSIDE = 76 +GD_POLYMODE = 77 +GD_POLYSMOOTH = 78 +GD_SCRBOX = 79 +GD_TEXTURE = 80 +GD_FOGPIXEL = 81 +GD_TEXTURE_PERSP = 82 +GD_MUXPIPES = 83 +GD_NOLIMIT = -2 +GD_WSYS_NONE = 0 +GD_WSYS_4S = 1 +GD_SCRNTYPE_WM = 0 +GD_SCRNTYPE_NOWM = 1 +N_PIXEL_TOLERANCE = 1 +N_CULLING = 2 +N_DISPLAY = 3 +N_ERRORCHECKING = 4 +N_SUBDIVISIONS = 5 +N_S_STEPS = 6 +N_T_STEPS = 7 +N_TILES = 8 +N_TMP1 = 9 +N_TMP2 = 10 +N_TMP3 = 11 +N_TMP4 = 12 +N_TMP5 = 13 +N_TMP6 = 14 +N_FILL = 1.0 +N_OUTLINE_POLY = 2.0 +N_OUTLINE_PATCH = 5.0 +N_ISOLINE_S = 12.0 +N_ST = 0x8 +N_STW = 0xd +N_XYZ = 0x4c +N_XYZW = 0x51 +N_TEX = 0x88 +N_TEXW = 0x8d +N_RGBA = 0xd0 +N_RGBAW = 0xd5 +N_P2D = 0x8 +N_P2DR = 0xd +N_V3D = 0x4c +N_V3DR = 0x51 +N_T2D = 0x88 +N_T2DR = 0x8d +N_C4D = 0xd0 +N_C4DR = 0xd5 +LMNULL = 0.0 +MSINGLE = 0 +MPROJECTION = 1 +MVIEWING = 2 +MTEXTURE = 3 +MAXLIGHTS = 8 +MAXRESTRICTIONS = 4 +DEFMATERIAL = 0 +EMISSION = 1 +AMBIENT = 2 +DIFFUSE = 3 +SPECULAR = 4 +SHININESS = 5 +COLORINDEXES = 6 +ALPHA = 7 +DEFLIGHT = 100 +LCOLOR = 101 +POSITION = 102 +SPOTDIRECTION = 103 +SPOTLIGHT = 104 +DEFLMODEL = 200 +LOCALVIEWER = 201 +ATTENUATION = 202 +ATTENUATION2 = 203 +TWOSIDE = 204 +MATERIAL = 1000 +BACKMATERIAL = 1001 +LIGHT0 = 1100 +LIGHT1 = 1101 +LIGHT2 = 1102 +LIGHT3 = 1103 +LIGHT4 = 1104 +LIGHT5 = 1105 +LIGHT6 = 1106 +LIGHT7 = 1107 +LMODEL = 1200 +LMC_COLOR = 0 +LMC_EMISSION = 1 +LMC_AMBIENT = 2 +LMC_DIFFUSE = 3 +LMC_SPECULAR = 4 +LMC_AD = 5 +LMC_NULL = 6 +TX_MINFILTER = 0x100 +TX_MAGFILTER = 0x200 +TX_WRAP = 0x300 +TX_WRAP_S = 0x310 +TX_WRAP_T = 0x320 +TX_TILE = 0x400 +TX_BORDER = 0x500 +TX_NULL = 0x000 +TX_POINT = 0x110 +TX_BILINEAR = 0x220 +TX_MIPMAP = 0x120 +TX_MIPMAP_POINT = 0x121 +TX_MIPMAP_LINEAR = 0x122 +TX_MIPMAP_BILINEAR = 0x123 +TX_MIPMAP_TRILINEAR = 0x124 +TX_REPEAT = 0x301 +TX_CLAMP = 0x302 +TX_SELECT = 0x303 +TX_TEXTURE_0 = 0 +TV_MODULATE = 0x101 +TV_BLEND = 0x102 +TV_DECAL = 0x103 +TV_COLOR = 0x200 +TV_NULL = 0x000 +TV_ENV0 = 0 +TX_S = 0 +TX_T = 1 +TG_OFF = 0 +TG_ON = 1 +TG_CONTOUR = 2 +TG_LINEAR = 3 +TG_SPHEREMAP = 4 +TG_REFRACTMAP = 5 +DGLSINK = 0 +DGLLOCAL = 1 +DGLTSOCKET = 2 +DGL4DDN = 3 +PUP_CURSOR = PUP_COLOR +FATAL = 1 +WARNING = 2 +ASK_CONT = 3 +ASK_RESTART = 4 +XMAXSCREEN = 1279 +YMAXSCREEN = 1023 +XMAXMEDIUM = 1023 +YMAXMEDIUM = 767 +XMAX170 = 645 +YMAX170 = 484 +XMAXPAL = 779 +YMAXPAL = 574 diff --git a/Lib/irix6/GLWS.py b/Lib/irix6/GLWS.py new file mode 100644 index 0000000..69dab71 --- /dev/null +++ b/Lib/irix6/GLWS.py @@ -0,0 +1,12 @@ +NOERROR = 0 +NOCONTEXT = -1 +NODISPLAY = -2 +NOWINDOW = -3 +NOGRAPHICS = -4 +NOTTOP = -5 +NOVISUAL = -6 +BUFSIZE = -7 +BADWINDOW = -8 +ALREADYBOUND = -100 +BINDFAILED = -101 +SETFAILED = -102 diff --git a/Lib/irix6/IN.py b/Lib/irix6/IN.py new file mode 100644 index 0000000..7340878 --- /dev/null +++ b/Lib/irix6/IN.py @@ -0,0 +1,133 @@ +# Generated by h2py from /usr/include/netinet/in.h + +# Included from sgidefs.h +_MIPS_ISA_MIPS1 = 1 +_MIPS_ISA_MIPS2 = 2 +_MIPS_ISA_MIPS3 = 3 +_MIPS_ISA_MIPS4 = 4 +_MIPS_SIM_ABI32 = 1 +_MIPS_SIM_NABI32 = 2 +_MIPS_SIM_ABI64 = 3 + +# Included from sys/endian.h +LITTLE_ENDIAN = 1234 +BIG_ENDIAN = 4321 +PDP_ENDIAN = 3412 +BYTE_ORDER = BIG_ENDIAN +BYTE_ORDER = LITTLE_ENDIAN +def ntohl(x): return (x) + +def ntohs(x): return (x) + +def htonl(x): return (x) + +def htons(x): return (x) + +def htonl(x): return ntohl(x) + +def htons(x): return ntohs(x) + + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h + +# Included from standards.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 +IPPROTO_IP = 0 +IPPROTO_ICMP = 1 +IPPROTO_IGMP = 2 +IPPROTO_GGP = 3 +IPPROTO_IPIP = 4 +IPPROTO_ENCAP = IPPROTO_IPIP +IPPROTO_ST = 5 +IPPROTO_TCP = 6 +IPPROTO_EGP = 8 +IPPROTO_PUP = 12 +IPPROTO_UDP = 17 +IPPROTO_IDP = 22 +IPPROTO_TP = 29 +IPPROTO_XTP = 36 +IPPROTO_RSVP = 46 +IPPROTO_HELLO = 63 +IPPROTO_ND = 77 +IPPROTO_EON = 80 +IPPROTO_OSPF = 89 +IPPROTO_SWIPE = 94 +IPPROTO_RAW = 255 +IPPROTO_MAX = 256 +IPPORT_RESERVED = 1024 +IPPORT_MAXPORT = 65535 +def IN_CLASSA(i): return (((__int32_t)(i) & 0x80000000) == 0) + +IN_CLASSA_NET = 0xff000000 +IN_CLASSA_NSHIFT = 24 +IN_CLASSA_HOST = 0x00ffffff +IN_CLASSA_MAX = 128 +def IN_CLASSB(i): return (((__int32_t)(i) & 0xc0000000) == 0x80000000) + +IN_CLASSB_NET = 0xffff0000 +IN_CLASSB_NSHIFT = 16 +IN_CLASSB_HOST = 0x0000ffff +IN_CLASSB_MAX = 65536 +def IN_CLASSC(i): return (((__int32_t)(i) & 0xe0000000) == 0xc0000000) + +IN_CLASSC_NET = 0xffffff00 +IN_CLASSC_NSHIFT = 8 +IN_CLASSC_HOST = 0x000000ff +def IN_CLASSD(i): return (((__int32_t)(i) & 0xf0000000) == 0xe0000000) + +IN_CLASSD_NET = 0xf0000000 +IN_CLASSD_NSHIFT = 28 +IN_CLASSD_HOST = 0x0fffffff +def IN_MULTICAST(i): return IN_CLASSD(i) + +def IN_EXPERIMENTAL(i): return (((__int32_t)(i) & 0xf0000000) == 0xf0000000) + +def IN_BADCLASS(i): return (((__int32_t)(i) & 0xf0000000) == 0xf0000000) + +INADDR_NONE = 0xffffffff +IN_LOOPBACKNET = 127 +IP_OPTIONS = 1 +IP_HDRINCL = 2 +IP_TOS = 3 +IP_TTL = 4 +IP_RECVOPTS = 5 +IP_RECVRETOPTS = 6 +IP_RECVDSTADDR = 7 +IP_RETOPTS = 8 +IP_MULTICAST_IF = 20 +IP_MULTICAST_TTL = 21 +IP_MULTICAST_LOOP = 22 +IP_ADD_MEMBERSHIP = 23 +IP_DROP_MEMBERSHIP = 24 +IP_MULTICAST_VIF = 25 +IP_RSVP_VIF_ON = 26 +IP_RSVP_VIF_OFF = 27 +IP_RSVP_ON = 28 +IP_SENDSRCADDR = 36 +IP_DEFAULT_MULTICAST_TTL = 1 +IP_DEFAULT_MULTICAST_LOOP = 1 +IP_MAX_MEMBERSHIPS = 20 diff --git a/Lib/irix6/IOCTL.py b/Lib/irix6/IOCTL.py new file mode 100644 index 0000000..cec3c3f --- /dev/null +++ b/Lib/irix6/IOCTL.py @@ -0,0 +1,233 @@ +# These lines were mostly generated by h2py.py (see demo/scripts) +# from <sys/ioctl.h>, <sys/termio.h> and <termios.h> on Irix 4.0.2 +# with some manual changes to cope with imperfections in h2py.py. +# The applicability on other systems is not clear; especially non-SYSV +# systems may have a totally different set of ioctls. + +IOCTYPE = 0xff00 +LIOC = (ord('l')<<8) +LIOCGETP = (LIOC|1) +LIOCSETP = (LIOC|2) +LIOCGETS = (LIOC|5) +LIOCSETS = (LIOC|6) +DIOC = (ord('d')<<8) +DIOCGETC = (DIOC|1) +DIOCGETB = (DIOC|2) +DIOCSETE = (DIOC|3) +IOCPARM_MASK = 0x7f +IOC_VOID = 0x20000000 +IOC_OUT = 0x40000000 +IOC_IN = 0x80000000 +IOC_INOUT = (IOC_IN|IOC_OUT) +int = 'i' +short = 'h' +long = 'l' +def sizeof(t): import struct; return struct.calcsize(t) +def _IO(x,y): return (IOC_VOID|((x)<<8)|y) +def _IOR(x,y,t): return (IOC_OUT|((sizeof(t)&IOCPARM_MASK)<<16)|((x)<<8)|y) +def _IOW(x,y,t): return (IOC_IN|((sizeof(t)&IOCPARM_MASK)<<16)|((x)<<8)|y) +# this should be _IORW, but stdio got there first +def _IOWR(x,y,t): return (IOC_INOUT|((sizeof(t)&IOCPARM_MASK)<<16)|((x)<<8)|y) +FIONREAD = _IOR(ord('f'), 127, int) +FIONBIO = _IOW(ord('f'), 126, int) +FIOASYNC = _IOW(ord('f'), 125, int) +FIOSETOWN = _IOW(ord('f'), 124, int) +FIOGETOWN = _IOR(ord('f'), 123, int) +NCC = 8 +NCC_PAD = 7 +NCC_EXT = 16 +NCCS = (NCC+NCC_PAD+NCC_EXT) +VINTR = 0 +VQUIT = 1 +VERASE = 2 +VKILL = 3 +VEOF = 4 +VEOL = 5 +VEOL2 = 6 +VMIN = VEOF +VTIME = VEOL +VSWTCH = 7 +VLNEXT = (NCC+NCC_PAD+0) +VWERASE = (NCC+NCC_PAD+1) +VRPRNT = (NCC+NCC_PAD+2) +VFLUSHO = (NCC+NCC_PAD+3) +VSTOP = (NCC+NCC_PAD+4) +VSTART = (NCC+NCC_PAD+5) +CNUL = '\0' +CDEL = '\377' +CESC = '\\' +CINTR = '\177' +CQUIT = '\34' +CBRK = '\377' +def CTRL(c): return ord(c) & 0x0f +CERASE = CTRL('H') +CKILL = CTRL('U') +CEOF = CTRL('d') +CEOT = CEOF +CSTART = CTRL('q') +CSTOP = CTRL('s') +CSWTCH = CTRL('z') +CSUSP = CSWTCH +CNSWTCH = 0 +CLNEXT = CTRL('v') +CWERASE = CTRL('w') +CFLUSHO = CTRL('o') +CFLUSH = CFLUSHO +CRPRNT = CTRL('r') +CDSUSP = CTRL('y') +IGNBRK = 0000001 +BRKINT = 0000002 +IGNPAR = 0000004 +PARMRK = 0000010 +INPCK = 0000020 +ISTRIP = 0000040 +INLCR = 0000100 +IGNCR = 0000200 +ICRNL = 0000400 +IUCLC = 0001000 +IXON = 0002000 +IXANY = 0004000 +IXOFF = 0010000 +IBLKMD = 0020000 +OPOST = 0000001 +OLCUC = 0000002 +ONLCR = 0000004 +OCRNL = 0000010 +ONOCR = 0000020 +ONLRET = 0000040 +OFILL = 0000100 +OFDEL = 0000200 +NLDLY = 0000400 +NL0 = 0 +NL1 = 0000400 +CRDLY = 0003000 +CR0 = 0 +CR1 = 0001000 +CR2 = 0002000 +CR3 = 0003000 +TABDLY = 0014000 +TAB0 = 0 +TAB1 = 0004000 +TAB2 = 0010000 +TAB3 = 0014000 +BSDLY = 0020000 +BS0 = 0 +BS1 = 0020000 +VTDLY = 0040000 +VT0 = 0 +VT1 = 0040000 +FFDLY = 0100000 +FF0 = 0 +FF1 = 0100000 +CBAUD = 0000017 +B0 = 0 +B50 = 0000001 +B75 = 0000002 +B110 = 0000003 +B134 = 0000004 +B150 = 0000005 +B200 = 0000006 +B300 = 0000007 +B600 = 0000010 +B1200 = 0000011 +B1800 = 0000012 +B2400 = 0000013 +B4800 = 0000014 +B9600 = 0000015 +B19200 = 0000016 +EXTA = 0000016 +B38400 = 0000017 +EXTB = 0000017 +CSIZE = 0000060 +CS5 = 0 +CS6 = 0000020 +CS7 = 0000040 +CS8 = 0000060 +CSTOPB = 0000100 +CREAD = 0000200 +PARENB = 0000400 +PARODD = 0001000 +HUPCL = 0002000 +CLOCAL = 0004000 +LOBLK = 0040000 +ISIG = 0000001 +ICANON = 0000002 +XCASE = 0000004 +ECHO = 0000010 +ECHOE = 0000020 +ECHOK = 0000040 +ECHONL = 0000100 +NOFLSH = 0000200 +IIEXTEN = 0000400 +ITOSTOP = 0001000 +SSPEED = B9600 +IOCTYPE = 0xff00 +TIOC = (ord('T')<<8) +oTCGETA = (TIOC|1) +oTCSETA = (TIOC|2) +oTCSETAW = (TIOC|3) +oTCSETAF = (TIOC|4) +TCSBRK = (TIOC|5) +TCXONC = (TIOC|6) +TCFLSH = (TIOC|7) +TCGETA = (TIOC|8) +TCSETA = (TIOC|9) +TCSETAW = (TIOC|10) +TCSETAF = (TIOC|11) +TIOCFLUSH = (TIOC|12) +TCDSET = (TIOC|32) +TCBLKMD = (TIOC|33) +TIOCPKT = (TIOC|112) +TIOCPKT_DATA = 0x00 +TIOCPKT_FLUSHREAD = 0x01 +TIOCPKT_FLUSHWRITE = 0x02 +TIOCPKT_NOSTOP = 0x10 +TIOCPKT_DOSTOP = 0x20 +TIOCNOTTY = (TIOC|113) +TIOCSTI = (TIOC|114) +TIOCSPGRP = _IOW(ord('t'), 118, int) +TIOCGPGRP = _IOR(ord('t'), 119, int) +TIOCCONS = _IOW(ord('t'), 120, int) +struct_winsize = 'hhhh' +TIOCGWINSZ = _IOR(ord('t'), 104, struct_winsize) +TIOCSWINSZ = _IOW(ord('t'), 103, struct_winsize) +TFIOC = (ord('F')<<8) +oFIONREAD = (TFIOC|127) +LDIOC = (ord('D')<<8) +LDOPEN = (LDIOC|0) +LDCLOSE = (LDIOC|1) +LDCHG = (LDIOC|2) +LDGETT = (LDIOC|8) +LDSETT = (LDIOC|9) +TERM_NONE = 0 +TERM_TEC = 1 +TERM_V61 = 2 +TERM_V10 = 3 +TERM_TEX = 4 +TERM_D40 = 5 +TERM_H45 = 6 +TERM_D42 = 7 +TM_NONE = 0000 +TM_SNL = 0001 +TM_ANL = 0002 +TM_LCF = 0004 +TM_CECHO = 0010 +TM_CINVIS = 0020 +TM_SET = 0200 +LDISC0 = 0 +LDISC1 = 1 +NTTYDISC = LDISC1 +VSUSP = VSWTCH +TCSANOW = 0 +TCSADRAIN = 1 +TCSAFLUSH = 2 +TCIFLUSH = 0 +TCOFLUSH = 1 +TCIOFLUSH = 2 +TCOOFF = 0 +TCOON = 1 +TCIOFF = 2 +TCION = 3 +TO_STOP = LOBLK +IEXTEN = IIEXTEN +TOSTOP = ITOSTOP diff --git a/Lib/irix6/SOCKET.py b/Lib/irix6/SOCKET.py new file mode 100644 index 0000000..39a8b63 --- /dev/null +++ b/Lib/irix6/SOCKET.py @@ -0,0 +1,152 @@ +# Generated by h2py from /usr/include/sys/socket.h + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h + +# Included from standards.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 +NC_TPI_CLTS = 1 +NC_TPI_COTS = 2 +NC_TPI_COTS_ORD = 3 +NC_TPI_RAW = 4 +SOCK_DGRAM = NC_TPI_CLTS +SOCK_STREAM = NC_TPI_COTS +SOCK_RAW = NC_TPI_RAW +SOCK_RDM = 5 +SOCK_SEQPACKET = 6 +SO_DEBUG = 0x0001 +SO_ACCEPTCONN = 0x0002 +SO_REUSEADDR = 0x0004 +SO_KEEPALIVE = 0x0008 +SO_DONTROUTE = 0x0010 +SO_BROADCAST = 0x0020 +SO_USELOOPBACK = 0x0040 +SO_LINGER = 0x0080 +SO_OOBINLINE = 0x0100 +SO_REUSEPORT = 0x0200 +SO_ORDREL = 0x0200 +SO_IMASOCKET = 0x0400 +SO_CHAMELEON = 0x1000 +SO_PASSIFNAME = 0x2000 +SO_SNDBUF = 0x1001 +SO_RCVBUF = 0x1002 +SO_SNDLOWAT = 0x1003 +SO_RCVLOWAT = 0x1004 +SO_SNDTIMEO = 0x1005 +SO_RCVTIMEO = 0x1006 +SO_ERROR = 0x1007 +SO_TYPE = 0x1008 +SO_PROTOTYPE = 0x1009 +SOL_SOCKET = 0xffff +AF_UNSPEC = 0 +AF_LOCAL = 1 +AF_UNIX = AF_LOCAL +AF_INET = 2 +AF_IMPLINK = 3 +AF_PUP = 4 +AF_CHAOS = 5 +AF_NS = 6 +AF_ISO = 7 +AF_ECMA = 8 +AF_DATAKIT = 9 +AF_CCITT = 10 +AF_SNA = 11 +AF_DECnet = 12 +AF_DLI = 13 +AF_LAT = 14 +AF_HYLINK = 15 +AF_APPLETALK = 16 +AF_ROUTE = 17 +AF_RAW = 18 +AF_LINK = 18 +pseudo_AF_XTP = 19 +AF_NIT = 17 +AF_802 = 18 +AF_OSI = 19 +AF_X25 = 20 +AF_OSINET = 21 +AF_GOSIP = 22 +AF_SDL = 23 +AF_INET6 = 24 +AF_LINK = 25 +AF_MAX = (AF_LINK+1) +_SIN_ADDR_SIZE = 8 +_SIN_SA_DATA_SIZE = 14 +_MAX_SA_LEN = 20 +def OPTLEN(x): return ((((x) + sizeof(int) - 1) / sizeof(int)) * sizeof(int)) + +PF_UNSPEC = AF_UNSPEC +PF_LOCAL = AF_LOCAL +PF_UNIX = PF_LOCAL +PF_INET = AF_INET +PF_IMPLINK = AF_IMPLINK +PF_PUP = AF_PUP +PF_CHAOS = AF_CHAOS +PF_NS = AF_NS +PF_ISO = AF_ISO +PF_OSI = AF_ISO +PF_ECMA = AF_ECMA +PF_DATAKIT = AF_DATAKIT +PF_CCITT = AF_CCITT +PF_SNA = AF_SNA +PF_DECnet = AF_DECnet +PF_DLI = AF_DLI +PF_LAT = AF_LAT +PF_HYLINK = AF_HYLINK +PF_APPLETALK = AF_APPLETALK +PF_ROUTE = AF_ROUTE +PF_LINK = AF_LINK +PF_XTP = pseudo_AF_XTP +PF_RAW = AF_RAW +PF_NIT = AF_NIT +PF_802 = AF_802 +PF_X25 = AF_X25 +PF_OSINET = AF_OSINET +PF_GOSIP = AF_GOSIP +PF_INET6 = AF_INET6 +PF_MAX = AF_MAX +NET_RT_DUMP = 1 +NET_RT_FLAGS = 2 +NET_RT_IFLIST = 3 +IPCTL_FORWARDING = 1 +IPCTL_SENDREDIRECTS = 2 +UDPCTL_CHECKSUM = 1 +SOMAXCONN = 1000 +MSG_OOB = 0x1 +MSG_PEEK = 0x2 +MSG_DONTROUTE = 0x4 +MSG_EOR = 0x8 +MSG_TRUNC = 0x10 +MSG_CTRUNC = 0x20 +MSG_WAITALL = 0x40 +MSG_DONTWAIT = 0x80 +MSG_BTAG = 0x40 +MSG_ETAG = 0x80 +MSG_MAXIOVLEN = 16 +_ALIGNBYTES = 7 +def _ALIGN(p): return (((u_int)(p) + _ALIGNBYTES) & ~_ALIGNBYTES) + +SCM_RIGHTS = 0x01 diff --git a/Lib/irix6/SV.py b/Lib/irix6/SV.py new file mode 100644 index 0000000..08fb917 --- /dev/null +++ b/Lib/irix6/SV.py @@ -0,0 +1,120 @@ +NTSC_XMAX = 640 +NTSC_YMAX = 480 +PAL_XMAX = 768 +PAL_YMAX = 576 +BLANKING_BUFFER_SIZE = 2 + +MAX_SOURCES = 2 + +# mode parameter for Bind calls +IN_OFF = 0 # No Video +IN_OVER = 1 # Video over graphics +IN_UNDER = 2 # Video under graphics +IN_REPLACE = 3 # Video replaces entire win + +# mode parameters for LoadMap calls. Specifies buffer, always 256 entries +INPUT_COLORMAP = 0 # tuples of 8-bit RGB +CHROMA_KEY_MAP = 1 # tuples of 8-bit RGB +COLOR_SPACE_MAP = 2 # tuples of 8-bit RGB +GAMMA_MAP = 3 # tuples of 24-bit red values + +# mode parameters for UseExclusive calls +INPUT = 0 +OUTPUT = 1 +IN_OUT = 2 + +# Format constants for the capture routines +RGB8_FRAMES = 0 # noninterleaved 8 bit 3:2:3 RBG fields +RGB32_FRAMES = 1 # 32-bit 8:8:8 RGB frames +YUV411_FRAMES = 2 # interleaved, 8:2:2 YUV format +YUV411_FRAMES_AND_BLANKING_BUFFER = 3 + +# +# sv.SetParam is passed variable length argument lists, +# consisting of <name, value> pairs. The following +# constants identify argument names. +# +_NAME_BASE = 1000 +SOURCE = (_NAME_BASE + 0) +SOURCE1 = 0 +SOURCE2 = 1 +SOURCE3 = 2 +COLOR = (_NAME_BASE + 1) +DEFAULT_COLOR = 0 +USER_COLOR = 1 +MONO = 2 +OUTPUTMODE = (_NAME_BASE + 2) +LIVE_OUTPUT = 0 +STILL24_OUT = 1 +FREEZE = (_NAME_BASE + 3) +DITHER = (_NAME_BASE + 4) +OUTPUT_FILTER = (_NAME_BASE + 5) +HUE = (_NAME_BASE + 6) +GENLOCK = (_NAME_BASE + 7) +GENLOCK_OFF = 0 +GENLOCK_ON = 1 +GENLOCK_HOUSE = 2 +BROADCAST = (_NAME_BASE + 8) +NTSC = 0 +PAL = 1 +VIDEO_MODE = (_NAME_BASE + 9) +COMP = 0 +SVIDEO = 1 +INPUT_BYPASS = (_NAME_BASE + 10) +FIELDDROP = (_NAME_BASE + 11) +SLAVE = (_NAME_BASE + 12) +APERTURE_FACTOR = (_NAME_BASE + 13) +AFACTOR_0 = 0 +AFACTOR_QTR = 1 +AFACTOR_HLF = 2 +AFACTOR_ONE = 3 +CORING = (_NAME_BASE + 14) +COR_OFF = 0 +COR_1LSB = 1 +COR_2LSB = 2 +COR_3LSB = 3 +APERTURE_BANDPASS = (_NAME_BASE + 15) +ABAND_F0 = 0 +ABAND_F1 = 1 +ABAND_F2 = 2 +ABAND_F3 = 3 +PREFILTER = (_NAME_BASE + 16) +CHROMA_TRAP = (_NAME_BASE + 17) +CK_THRESHOLD = (_NAME_BASE + 18) +PAL_SENSITIVITY = (_NAME_BASE + 19) +GAIN_CONTROL = (_NAME_BASE + 20) +GAIN_SLOW = 0 +GAIN_MEDIUM = 1 +GAIN_FAST = 2 +GAIN_FROZEN = 3 +AUTO_CKILL = (_NAME_BASE + 21) +VTR_MODE = (_NAME_BASE + 22) +VTR_INPUT = 0 +CAMERA_INPUT = 1 +LUMA_DELAY = (_NAME_BASE + 23) +VNOISE = (_NAME_BASE + 24) +VNOISE_NORMAL = 0 +VNOISE_SEARCH = 1 +VNOISE_AUTO = 2 +VNOISE_BYPASS = 3 +CHCV_PAL = (_NAME_BASE + 25) +CHCV_NTSC = (_NAME_BASE + 26) +CCIR_LEVELS = (_NAME_BASE + 27) +STD_CHROMA = (_NAME_BASE + 28) +DENC_VTBYPASS = (_NAME_BASE + 29) +FAST_TIMECONSTANT = (_NAME_BASE + 30) +GENLOCK_DELAY = (_NAME_BASE + 31) +PHASE_SYNC = (_NAME_BASE + 32) +VIDEO_OUTPUT = (_NAME_BASE + 33) +CHROMA_PHASEOUT = (_NAME_BASE + 34) +CHROMA_CENTER = (_NAME_BASE + 35) +YUV_TO_RGB_INVERT = (_NAME_BASE + 36) +SOURCE1_BROADCAST = (_NAME_BASE + 37) +SOURCE1_MODE = (_NAME_BASE + 38) +SOURCE2_BROADCAST = (_NAME_BASE + 39) +SOURCE2_MODE = (_NAME_BASE + 40) +SOURCE3_BROADCAST = (_NAME_BASE + 41) +SOURCE3_MODE = (_NAME_BASE + 42) +SIGNAL_STD = (_NAME_BASE + 43) +NOSIGNAL = 2 +SIGNAL_COLOR = (_NAME_BASE + 44) diff --git a/Lib/irix6/TERMIOS.py b/Lib/irix6/TERMIOS.py new file mode 100644 index 0000000..fa4a475 --- /dev/null +++ b/Lib/irix6/TERMIOS.py @@ -0,0 +1,676 @@ +# Generated by h2py from /usr/include/sys/termios.h + +# Included from standards.h + +# Included from sys/ttydev.h +__NEW_INVALID_BAUD = 1800 +__OLD_B0 = 0 +__OLD_B50 = 0000001 +__OLD_B75 = 0000002 +__OLD_B110 = 0000003 +__OLD_B134 = 0000004 +__OLD_B150 = 0000005 +__OLD_B200 = 0000006 +__OLD_B300 = 0000007 +__OLD_B600 = 0000010 +__OLD_B1200 = 0000011 +__OLD_B1800 = 0000012 +__OLD_B2400 = 0000013 +__OLD_B4800 = 0000014 +__OLD_B9600 = 0000015 +__OLD_B19200 = 0000016 +__OLD_EXTA = 0000016 +__OLD_B38400 = 0000017 +__OLD_EXTB = 0000017 +__OLD_INVALID_BAUD = __OLD_B1800 +B0 = 0 +B50 = 50 +B75 = 75 +B110 = 110 +B134 = 134 +B150 = 150 +B200 = 200 +B300 = 300 +B600 = 600 +B1200 = 1200 +B1800 = 1800 +B2400 = 2400 +B4800 = 4800 +B9600 = 9600 +B19200 = 19200 +EXTA = 19200 +B38400 = 38400 +EXTB = 38400 +B57600 = 57600 +B76800 = 76800 +B115200 = 115200 +__INVALID_BAUD = 1800 +B0 = __OLD_B0 +B50 = __OLD_B50 +B75 = __OLD_B75 +B110 = __OLD_B110 +B134 = __OLD_B134 +B150 = __OLD_B150 +B200 = __OLD_B200 +B300 = __OLD_B300 +B600 = __OLD_B600 +B1200 = __OLD_B1200 +B1800 = __OLD_B1800 +B2400 = __OLD_B2400 +B4800 = __OLD_B4800 +B9600 = __OLD_B9600 +B19200 = __OLD_B19200 +EXTA = __OLD_B19200 +B38400 = __OLD_B38400 +EXTB = __OLD_B38400 +__INVALID_BAUD = __OLD_INVALID_BAUD + +# Included from sys/types.h + +# Included from sgidefs.h +_MIPS_ISA_MIPS1 = 1 +_MIPS_ISA_MIPS2 = 2 +_MIPS_ISA_MIPS3 = 3 +_MIPS_ISA_MIPS4 = 4 +_MIPS_SIM_ABI32 = 1 +_MIPS_SIM_NABI32 = 2 +_MIPS_SIM_ABI64 = 3 +P_MYID = (-1) +P_MYHOSTID = (-1) + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 +_POSIX_VDISABLE = 0 +def CTRL(c): return ((c)&037) + +IBSHIFT = 16 +NCC = 8 +NCCS = 23 +__NEW_MAX_BAUD = 500000 +VINTR = 0 +VQUIT = 1 +VERASE = 2 +VKILL = 3 +VEOF = 4 +VEOL = 5 +VEOL2 = 6 +VMIN = 4 +VTIME = 5 +VSWTCH = 7 +VSTART = 8 +VSTOP = 9 +VSUSP = 10 +VDSUSP = 11 +VREPRINT = 12 +VDISCARD = 13 +VWERASE = 14 +VLNEXT = 15 +VRPRNT = VREPRINT +VFLUSHO = VDISCARD +VCEOF = NCC +VCEOL = (NCC + 1) +CNUL = 0 +CDEL = 0377 +CESC = ord('\\') +CINTR = 0177 +CQUIT = 034 +CERASE = CTRL(ord('H')) +CKILL = CTRL(ord('U')) +CEOL = 0 +CEOL2 = 0 +CEOF = CTRL(ord('d')) +CEOT = CEOF +CSTART = CTRL(ord('q')) +CSTOP = CTRL(ord('s')) +CSWTCH = CTRL(ord('z')) +CNSWTCH = 0 +CSUSP = CSWTCH +CLNEXT = CTRL(ord('v')) +CWERASE = CTRL(ord('w')) +CFLUSHO = CTRL(ord('o')) +CFLUSH = CFLUSHO +CRPRNT = CTRL(ord('r')) +CDSUSP = CTRL(ord('y')) +CBRK = 0377 +IGNBRK = 0000001 +BRKINT = 0000002 +IGNPAR = 0000004 +PARMRK = 0000010 +INPCK = 0000020 +ISTRIP = 0000040 +INLCR = 0000100 +IGNCR = 0000200 +ICRNL = 0000400 +IUCLC = 0001000 +IXON = 0002000 +IXANY = 0004000 +IXOFF = 0010000 +IMAXBEL = 0020000 +IBLKMD = 0040000 +OPOST = 0000001 +OLCUC = 0000002 +ONLCR = 0000004 +OCRNL = 0000010 +ONOCR = 0000020 +ONLRET = 0000040 +OFILL = 0000100 +OFDEL = 0000200 +NLDLY = 0000400 +NL0 = 0 +NL1 = 0000400 +CRDLY = 0003000 +CR0 = 0 +CR1 = 0001000 +CR2 = 0002000 +CR3 = 0003000 +TABDLY = 0014000 +TAB0 = 0 +TAB1 = 0004000 +TAB2 = 0010000 +TAB3 = 0014000 +XTABS = 0014000 +BSDLY = 0020000 +BS0 = 0 +BS1 = 0020000 +VTDLY = 0040000 +VT0 = 0 +VT1 = 0040000 +FFDLY = 0100000 +FF0 = 0 +FF1 = 0100000 +PAGEOUT = 0200000 +WRAP = 0400000 +CBAUD = 000000017 +CSIZE = 000000060 +CS5 = 0 +CS6 = 000000020 +CS7 = 000000040 +CS8 = 000000060 +CSTOPB = 000000100 +CREAD = 000000200 +PARENB = 000000400 +PARODD = 000001000 +HUPCL = 000002000 +CLOCAL = 000004000 +RCV1EN = 000010000 +XMT1EN = 000020000 +LOBLK = 000040000 +XCLUDE = 000100000 +CIBAUD = 003600000 +PAREXT = 004000000 +CNEW_RTSCTS = 010000000 +ISIG = 0000001 +ICANON = 0000002 +XCASE = 0000004 +ECHO = 0000010 +ECHOE = 0000020 +ECHOK = 0000040 +ECHONL = 0000100 +NOFLSH = 0000200 +IEXTEN = 0000400 +ITOSTOP = 0100000 +TOSTOP = ITOSTOP +ECHOCTL = 0001000 +ECHOPRT = 0002000 +ECHOKE = 0004000 +DEFECHO = 0010000 +FLUSHO = 0020000 +PENDIN = 0040000 +TIOC = (ord('T')<<8) +__NEW_TCGETA = (TIOC|201) +__NEW_TCSETA = (TIOC|202) +__NEW_TCSETAW = (TIOC|203) +__NEW_TCSETAF = (TIOC|204) +__OLD_TCGETA = (TIOC|1) +__OLD_TCSETA = (TIOC|2) +__OLD_TCSETAW = (TIOC|3) +__OLD_TCSETAF = (TIOC|4) +TCGETA = __NEW_TCGETA +TCSETA = __NEW_TCSETA +TCSETAW = __NEW_TCSETAW +TCSETAF = __NEW_TCSETAF +TCGETA = __OLD_TCGETA +TCSETA = __OLD_TCSETA +TCSETAW = __OLD_TCSETAW +TCSETAF = __OLD_TCSETAF +TCSBRK = (TIOC|5) +TCXONC = (TIOC|6) +TCFLSH = (TIOC|7) + +# Included from sys/ioctl.h +IOCTYPE = 0xff00 +LIOC = (ord('l')<<8) +LIOCGETP = (LIOC|1) +LIOCSETP = (LIOC|2) +LIOCGETS = (LIOC|5) +LIOCSETS = (LIOC|6) +DIOC = (ord('d')<<8) +DIOCGETC = (DIOC|1) +DIOCGETB = (DIOC|2) +DIOCSETE = (DIOC|3) + +# Included from sys/ioccom.h +IOCPARM_MASK = 0xff +IOC_VOID = 0x20000000 +IOC_OUT = 0x40000000 +IOC_IN = 0x80000000 +IOC_INOUT = (IOC_IN|IOC_OUT) + +# Included from net/soioctl.h + +# Included from sys/termio.h + +# Included from sys/termios.h +_POSIX_VDISABLE = 0 +def CTRL(c): return ((c)&037) + +IBSHIFT = 16 +NCC = 8 +NCCS = 23 +__NEW_MAX_BAUD = 500000 +VINTR = 0 +VQUIT = 1 +VERASE = 2 +VKILL = 3 +VEOF = 4 +VEOL = 5 +VEOL2 = 6 +VMIN = 4 +VTIME = 5 +VSWTCH = 7 +VSTART = 8 +VSTOP = 9 +VSUSP = 10 +VDSUSP = 11 +VREPRINT = 12 +VDISCARD = 13 +VWERASE = 14 +VLNEXT = 15 +VRPRNT = VREPRINT +VFLUSHO = VDISCARD +VCEOF = NCC +VCEOL = (NCC + 1) +CNUL = 0 +CDEL = 0377 +CESC = ord('\\') +CINTR = 0177 +CQUIT = 034 +CERASE = CTRL(ord('H')) +CKILL = CTRL(ord('U')) +CEOL = 0 +CEOL2 = 0 +CEOF = CTRL(ord('d')) +CEOT = CEOF +CSTART = CTRL(ord('q')) +CSTOP = CTRL(ord('s')) +CSWTCH = CTRL(ord('z')) +CNSWTCH = 0 +CSUSP = CSWTCH +CLNEXT = CTRL(ord('v')) +CWERASE = CTRL(ord('w')) +CFLUSHO = CTRL(ord('o')) +CFLUSH = CFLUSHO +CRPRNT = CTRL(ord('r')) +CDSUSP = CTRL(ord('y')) +CBRK = 0377 +IGNBRK = 0000001 +BRKINT = 0000002 +IGNPAR = 0000004 +PARMRK = 0000010 +INPCK = 0000020 +ISTRIP = 0000040 +INLCR = 0000100 +IGNCR = 0000200 +ICRNL = 0000400 +IUCLC = 0001000 +IXON = 0002000 +IXANY = 0004000 +IXOFF = 0010000 +IMAXBEL = 0020000 +IBLKMD = 0040000 +OPOST = 0000001 +OLCUC = 0000002 +ONLCR = 0000004 +OCRNL = 0000010 +ONOCR = 0000020 +ONLRET = 0000040 +OFILL = 0000100 +OFDEL = 0000200 +NLDLY = 0000400 +NL0 = 0 +NL1 = 0000400 +CRDLY = 0003000 +CR0 = 0 +CR1 = 0001000 +CR2 = 0002000 +CR3 = 0003000 +TABDLY = 0014000 +TAB0 = 0 +TAB1 = 0004000 +TAB2 = 0010000 +TAB3 = 0014000 +XTABS = 0014000 +BSDLY = 0020000 +BS0 = 0 +BS1 = 0020000 +VTDLY = 0040000 +VT0 = 0 +VT1 = 0040000 +FFDLY = 0100000 +FF0 = 0 +FF1 = 0100000 +PAGEOUT = 0200000 +WRAP = 0400000 +CBAUD = 000000017 +CSIZE = 000000060 +CS5 = 0 +CS6 = 000000020 +CS7 = 000000040 +CS8 = 000000060 +CSTOPB = 000000100 +CREAD = 000000200 +PARENB = 000000400 +PARODD = 000001000 +HUPCL = 000002000 +CLOCAL = 000004000 +RCV1EN = 000010000 +XMT1EN = 000020000 +LOBLK = 000040000 +XCLUDE = 000100000 +CIBAUD = 003600000 +PAREXT = 004000000 +CNEW_RTSCTS = 010000000 +ISIG = 0000001 +ICANON = 0000002 +XCASE = 0000004 +ECHO = 0000010 +ECHOE = 0000020 +ECHOK = 0000040 +ECHONL = 0000100 +NOFLSH = 0000200 +IEXTEN = 0000400 +ITOSTOP = 0100000 +TOSTOP = ITOSTOP +ECHOCTL = 0001000 +ECHOPRT = 0002000 +ECHOKE = 0004000 +DEFECHO = 0010000 +FLUSHO = 0020000 +PENDIN = 0040000 +TIOC = (ord('T')<<8) +__NEW_TCGETA = (TIOC|201) +__NEW_TCSETA = (TIOC|202) +__NEW_TCSETAW = (TIOC|203) +__NEW_TCSETAF = (TIOC|204) +__OLD_TCGETA = (TIOC|1) +__OLD_TCSETA = (TIOC|2) +__OLD_TCSETAW = (TIOC|3) +__OLD_TCSETAF = (TIOC|4) +TCGETA = __NEW_TCGETA +TCSETA = __NEW_TCSETA +TCSETAW = __NEW_TCSETAW +TCSETAF = __NEW_TCSETAF +TCGETA = __OLD_TCGETA +TCSETA = __OLD_TCSETA +TCSETAW = __OLD_TCSETAW +TCSETAF = __OLD_TCSETAF +TCSBRK = (TIOC|5) +TCXONC = (TIOC|6) +TCFLSH = (TIOC|7) +LDISC0 = 0 +LDISC1 = 1 +NTTYDISC = LDISC1 +TIOCFLUSH = (TIOC|12) +TCSETLABEL = (TIOC|31) +TCDSET = (TIOC|32) +TCBLKMD = (TIOC|33) +TIOCPKT = (TIOC|112) +TIOCPKT_DATA = 0x00 +TIOCPKT_FLUSHREAD = 0x01 +TIOCPKT_FLUSHWRITE = 0x02 +TIOCPKT_NOSTOP = 0x10 +TIOCPKT_DOSTOP = 0x20 +TIOCPKT_IOCTL = 0x40 +TIOCNOTTY = (TIOC|113) +TIOCSTI = (TIOC|114) +TFIOC = (ord('F')<<8) +oFIONREAD = (TFIOC|127) +TO_STOP = LOBLK +IOCTYPE = 0xff00 +__NEW_TCGETS = (TIOC|213) +__NEW_TCSETS = (TIOC|214) +__NEW_TCSETSW = (TIOC|215) +__NEW_TCSETSF = (TIOC|216) +__OLD_TCGETS = (TIOC|13) +__OLD_TCSETS = (TIOC|14) +__OLD_TCSETSW = (TIOC|15) +__OLD_TCSETSF = (TIOC|16) +TCGETS = __NEW_TCGETS +TCSETS = __NEW_TCSETS +TCSETSW = __NEW_TCSETSW +TCSETSF = __NEW_TCSETSF +TCGETS = __OLD_TCGETS +TCSETS = __OLD_TCSETS +TCSETSW = __OLD_TCSETSW +TCSETSF = __OLD_TCSETSF +TCSANOW = ((ord('T')<<8)|14) +TCSADRAIN = ((ord('T')<<8)|15) +TCSAFLUSH = ((ord('T')<<8)|16) +TCIFLUSH = 0 +TCOFLUSH = 1 +TCIOFLUSH = 2 +TCOOFF = 0 +TCOON = 1 +TCIOFF = 2 +TCION = 3 +tIOC = (ord('t')<<8) +TIOCGETD = (tIOC|0) +TIOCSETD = (tIOC|1) +TIOCHPCL = (tIOC|2) +TIOCGETP = (tIOC|8) +TIOCSETP = (tIOC|9) +TIOCSETN = (tIOC|10) +TIOCEXCL = (tIOC|13) +TIOCNXCL = (tIOC|14) +TIOCSETC = (tIOC|17) +TIOCGETC = (tIOC|18) +TIOCLBIS = (tIOC|127) +TIOCLBIC = (tIOC|126) +TIOCLSET = (tIOC|125) +TIOCLGET = (tIOC|124) +TIOCSBRK = (tIOC|123) +TIOCCBRK = (tIOC|122) +TIOCSDTR = (tIOC|121) +TIOCCDTR = (tIOC|120) +TIOCSLTC = (tIOC|117) +TIOCGLTC = (tIOC|116) +TIOCOUTQ = (tIOC|115) +TIOCSTOP = (tIOC|111) +TIOCSTART = (tIOC|110) +TIOCGSID = (tIOC|22) +TIOCSSID = (tIOC|24) +TIOCMSET = (tIOC|26) +TIOCMBIS = (tIOC|27) +TIOCMBIC = (tIOC|28) +TIOCMGET = (tIOC|29) +TIOCM_LE = 0001 +TIOCM_DTR = 0002 +TIOCM_RTS = 0004 +TIOCM_ST = 0010 +TIOCM_SR = 0020 +TIOCM_CTS = 0040 +TIOCM_CAR = 0100 +TIOCM_CD = TIOCM_CAR +TIOCM_RNG = 0200 +TIOCM_RI = TIOCM_RNG +TIOCM_DSR = 0400 +TIOCREMOTE = (tIOC|30) +TIOCSIGNAL = (tIOC|31) +ISPTM = ((ord('P')<<8)|1) +UNLKPT = ((ord('P')<<8)|2) +SVR4SOPEN = ((ord('P')<<8)|100) +LDIOC = (ord('D')<<8) +LDOPEN = (LDIOC|0) +LDCLOSE = (LDIOC|1) +LDCHG = (LDIOC|2) +LDGETT = (LDIOC|8) +LDSETT = (LDIOC|9) +LDSMAP = (LDIOC|10) +LDGMAP = (LDIOC|11) +LDNMAP = (LDIOC|12) +DIOC = (ord('d')<<8) +DIOCGETP = (DIOC|8) +DIOCSETP = (DIOC|9) +FIORDCHK = ((ord('f')<<8)|3) +CLNEXT = CTRL(ord('v')) +CWERASE = CTRL(ord('w')) +CFLUSHO = CTRL(ord('o')) +CFLUSH = CFLUSHO +CRPRNT = CTRL(ord('r')) +CDSUSP = CTRL(ord('y')) +__OLD_SSPEED = __OLD_B9600 +SSPEED = B9600 +TERM_NONE = 0 +TERM_TEC = 1 +TERM_V61 = 2 +TERM_V10 = 3 +TERM_TEX = 4 +TERM_D40 = 5 +TERM_H45 = 6 +TERM_D42 = 7 +TM_NONE = 0000 +TM_SNL = 0001 +TM_ANL = 0002 +TM_LCF = 0004 +TM_CECHO = 0010 +TM_CINVIS = 0020 +TM_SET = 0200 +LDISC0 = 0 +LDISC1 = 1 +NTTYDISC = LDISC1 +TIOCFLUSH = (TIOC|12) +TCSETLABEL = (TIOC|31) +TCDSET = (TIOC|32) +TCBLKMD = (TIOC|33) +TIOCPKT = (TIOC|112) +TIOCPKT_DATA = 0x00 +TIOCPKT_FLUSHREAD = 0x01 +TIOCPKT_FLUSHWRITE = 0x02 +TIOCPKT_NOSTOP = 0x10 +TIOCPKT_DOSTOP = 0x20 +TIOCPKT_IOCTL = 0x40 +TIOCNOTTY = (TIOC|113) +TIOCSTI = (TIOC|114) +TFIOC = (ord('F')<<8) +oFIONREAD = (TFIOC|127) +TO_STOP = LOBLK +IOCTYPE = 0xff00 +__NEW_TCGETS = (TIOC|213) +__NEW_TCSETS = (TIOC|214) +__NEW_TCSETSW = (TIOC|215) +__NEW_TCSETSF = (TIOC|216) +__OLD_TCGETS = (TIOC|13) +__OLD_TCSETS = (TIOC|14) +__OLD_TCSETSW = (TIOC|15) +__OLD_TCSETSF = (TIOC|16) +TCGETS = __NEW_TCGETS +TCSETS = __NEW_TCSETS +TCSETSW = __NEW_TCSETSW +TCSETSF = __NEW_TCSETSF +TCGETS = __OLD_TCGETS +TCSETS = __OLD_TCSETS +TCSETSW = __OLD_TCSETSW +TCSETSF = __OLD_TCSETSF +TCSANOW = ((ord('T')<<8)|14) +TCSADRAIN = ((ord('T')<<8)|15) +TCSAFLUSH = ((ord('T')<<8)|16) +TCIFLUSH = 0 +TCOFLUSH = 1 +TCIOFLUSH = 2 +TCOOFF = 0 +TCOON = 1 +TCIOFF = 2 +TCION = 3 +tIOC = (ord('t')<<8) +TIOCGETD = (tIOC|0) +TIOCSETD = (tIOC|1) +TIOCHPCL = (tIOC|2) +TIOCGETP = (tIOC|8) +TIOCSETP = (tIOC|9) +TIOCSETN = (tIOC|10) +TIOCEXCL = (tIOC|13) +TIOCNXCL = (tIOC|14) +TIOCSETC = (tIOC|17) +TIOCGETC = (tIOC|18) +TIOCLBIS = (tIOC|127) +TIOCLBIC = (tIOC|126) +TIOCLSET = (tIOC|125) +TIOCLGET = (tIOC|124) +TIOCSBRK = (tIOC|123) +TIOCCBRK = (tIOC|122) +TIOCSDTR = (tIOC|121) +TIOCCDTR = (tIOC|120) +TIOCSLTC = (tIOC|117) +TIOCGLTC = (tIOC|116) +TIOCOUTQ = (tIOC|115) +TIOCSTOP = (tIOC|111) +TIOCSTART = (tIOC|110) +TIOCGSID = (tIOC|22) +TIOCSSID = (tIOC|24) +TIOCMSET = (tIOC|26) +TIOCMBIS = (tIOC|27) +TIOCMBIC = (tIOC|28) +TIOCMGET = (tIOC|29) +TIOCM_LE = 0001 +TIOCM_DTR = 0002 +TIOCM_RTS = 0004 +TIOCM_ST = 0010 +TIOCM_SR = 0020 +TIOCM_CTS = 0040 +TIOCM_CAR = 0100 +TIOCM_CD = TIOCM_CAR +TIOCM_RNG = 0200 +TIOCM_RI = TIOCM_RNG +TIOCM_DSR = 0400 +TIOCREMOTE = (tIOC|30) +TIOCSIGNAL = (tIOC|31) +ISPTM = ((ord('P')<<8)|1) +UNLKPT = ((ord('P')<<8)|2) +SVR4SOPEN = ((ord('P')<<8)|100) +LDIOC = (ord('D')<<8) +LDOPEN = (LDIOC|0) +LDCLOSE = (LDIOC|1) +LDCHG = (LDIOC|2) +LDGETT = (LDIOC|8) +LDSETT = (LDIOC|9) +LDSMAP = (LDIOC|10) +LDGMAP = (LDIOC|11) +LDNMAP = (LDIOC|12) +DIOC = (ord('d')<<8) +DIOCGETP = (DIOC|8) +DIOCSETP = (DIOC|9) +FIORDCHK = ((ord('f')<<8)|3) diff --git a/Lib/irix6/WAIT.py b/Lib/irix6/WAIT.py new file mode 100644 index 0000000..741af3b --- /dev/null +++ b/Lib/irix6/WAIT.py @@ -0,0 +1,335 @@ +# Generated by h2py from /usr/include/sys/wait.h + +# Included from standards.h +def _W_INT(i): return (i) + +WUNTRACED = 0004 +WNOHANG = 0100 +_WSTOPPED = 0177 +def WIFEXITED(stat): return ((_W_INT(stat)&0377)==0) + +def WEXITSTATUS(stat): return ((_W_INT(stat)>>8)&0377) + +def WTERMSIG(stat): return (_W_INT(stat)&0177) + +def WSTOPSIG(stat): return ((_W_INT(stat)>>8)&0377) + +WEXITED = 0001 +WTRAPPED = 0002 +WSTOPPED = 0004 +WCONTINUED = 0010 +WNOWAIT = 0200 +WOPTMASK = (WEXITED|WTRAPPED|WSTOPPED|WCONTINUED|WNOHANG|WNOWAIT) +WSTOPFLG = 0177 +WCONTFLG = 0177777 +WCOREFLAG = 0200 +WSIGMASK = 0177 +def WWORD(stat): return (_W_INT(stat)&0177777) + +def WIFCONTINUED(stat): return (WWORD(stat)==WCONTFLG) + +def WCOREDUMP(stat): return (_W_INT(stat) & WCOREFLAG) + + +# Included from sys/types.h + +# Included from sgidefs.h +_MIPS_ISA_MIPS1 = 1 +_MIPS_ISA_MIPS2 = 2 +_MIPS_ISA_MIPS3 = 3 +_MIPS_ISA_MIPS4 = 4 +_MIPS_SIM_ABI32 = 1 +_MIPS_SIM_NABI32 = 2 +_MIPS_SIM_ABI64 = 3 +P_MYID = (-1) +P_MYHOSTID = (-1) + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 + +# Included from sys/procset.h +P_INITPID = 1 +P_INITUID = 0 +P_INITPGID = 0 + +# Included from sys/signal.h +SIGHUP = 1 +SIGINT = 2 +SIGQUIT = 3 +SIGILL = 4 +SIGTRAP = 5 +SIGIOT = 6 +SIGABRT = 6 +SIGEMT = 7 +SIGFPE = 8 +SIGKILL = 9 +SIGBUS = 10 +SIGSEGV = 11 +SIGSYS = 12 +SIGPIPE = 13 +SIGALRM = 14 +SIGTERM = 15 +SIGUSR1 = 16 +SIGUSR2 = 17 +SIGCLD = 18 +SIGCHLD = 18 +SIGPWR = 19 +SIGWINCH = 20 +SIGURG = 21 +SIGPOLL = 22 +SIGIO = 22 +SIGSTOP = 23 +SIGTSTP = 24 +SIGCONT = 25 +SIGTTIN = 26 +SIGTTOU = 27 +SIGVTALRM = 28 +SIGPROF = 29 +SIGXCPU = 30 +SIGXFSZ = 31 +SIG32 = 32 +SIGCKPT = 33 +SIGRTMIN = 49 +SIGRTMAX = 64 +SIGPTINTR = 47 +SIGPTRESCHED = 48 +__sigargs = int +SIGEV_NONE = 128 +SIGEV_SIGNAL = 129 +SIGEV_CALLBACK = 130 + +# Included from sys/siginfo.h +ILL_ILLOPC = 1 +ILL_ILLOPN = 2 +ILL_ILLADR = 3 +ILL_ILLTRP = 4 +ILL_PRVOPC = 5 +ILL_PRVREG = 6 +ILL_COPROC = 7 +ILL_BADSTK = 8 +NSIGILL = 8 +FPE_INTDIV = 1 +FPE_INTOVF = 2 +FPE_FLTDIV = 3 +FPE_FLTOVF = 4 +FPE_FLTUND = 5 +FPE_FLTRES = 6 +FPE_FLTINV = 7 +FPE_FLTSUB = 8 +NSIGFPE = 8 +SEGV_MAPERR = 1 +SEGV_ACCERR = 2 +NSIGSEGV = 2 +BUS_ADRALN = 1 +BUS_ADRERR = 2 +BUS_OBJERR = 3 +NSIGBUS = 3 +TRAP_BRKPT = 1 +TRAP_TRACE = 2 +NSIGTRAP = 2 +CLD_EXITED = 1 +CLD_KILLED = 2 +CLD_DUMPED = 3 +CLD_TRAPPED = 4 +CLD_STOPPED = 5 +CLD_CONTINUED = 6 +NSIGCLD = 6 +POLL_IN = 1 +POLL_OUT = 2 +POLL_MSG = 3 +POLL_ERR = 4 +POLL_PRI = 5 +POLL_HUP = 6 +NSIGPOLL = 6 +SI_MAXSZ = 128 +SI_USER = 0 +SI_KILL = SI_USER +SI_QUEUE = -1 +SI_ASYNCIO = -2 +SI_TIMER = -3 +SI_MESGQ = -4 +SIG_NOP = 0 +SIG_BLOCK = 1 +SIG_UNBLOCK = 2 +SIG_SETMASK = 3 +SIG_SETMASK32 = 256 +SA_ONSTACK = 0x00000001 +SA_RESETHAND = 0x00000002 +SA_RESTART = 0x00000004 +SA_SIGINFO = 0x00000008 +SA_NODEFER = 0x00000010 +SA_NOCLDWAIT = 0x00010000 +SA_NOCLDSTOP = 0x00020000 +_SA_BSDCALL = 0x10000000 +MINSIGSTKSZ = 512 +SIGSTKSZ = 8192 +SS_ONSTACK = 0x00000001 +SS_DISABLE = 0x00000002 + +# Included from sys/ucontext.h +NGREG = 36 +NGREG = 37 +GETCONTEXT = 0 +SETCONTEXT = 1 +UC_SIGMASK = 001 +UC_STACK = 002 +UC_CPU = 004 +UC_MAU = 010 +UC_MCONTEXT = (UC_CPU|UC_MAU) +UC_ALL = (UC_SIGMASK|UC_STACK|UC_MCONTEXT) +CTX_R0 = 0 +CTX_AT = 1 +CTX_V0 = 2 +CTX_V1 = 3 +CTX_A0 = 4 +CTX_A1 = 5 +CTX_A2 = 6 +CTX_A3 = 7 +CTX_T0 = 8 +CTX_T1 = 9 +CTX_T2 = 10 +CTX_T3 = 11 +CTX_T4 = 12 +CTX_T5 = 13 +CTX_T6 = 14 +CTX_T7 = 15 +CTX_A4 = 8 +CTX_A5 = 9 +CTX_A6 = 10 +CTX_A7 = 11 +CTX_T0 = 12 +CTX_T1 = 13 +CTX_T2 = 14 +CTX_T3 = 15 +CTX_S0 = 16 +CTX_S1 = 17 +CTX_S2 = 18 +CTX_S3 = 19 +CTX_S4 = 20 +CTX_S5 = 21 +CTX_S6 = 22 +CTX_S7 = 23 +CTX_T8 = 24 +CTX_T9 = 25 +CTX_K0 = 26 +CTX_K1 = 27 +CTX_GP = 28 +CTX_SP = 29 +CTX_S8 = 30 +CTX_RA = 31 +CTX_MDLO = 32 +CTX_MDHI = 33 +CTX_CAUSE = 34 +CTX_EPC = 35 +CTX_SR = 36 +CXT_R0 = CTX_R0 +CXT_AT = CTX_AT +CXT_V0 = CTX_V0 +CXT_V1 = CTX_V1 +CXT_A0 = CTX_A0 +CXT_A1 = CTX_A1 +CXT_A2 = CTX_A2 +CXT_A3 = CTX_A3 +CXT_T0 = CTX_T0 +CXT_T1 = CTX_T1 +CXT_T2 = CTX_T2 +CXT_T3 = CTX_T3 +CXT_T4 = CTX_T4 +CXT_T5 = CTX_T5 +CXT_T6 = CTX_T6 +CXT_T7 = CTX_T7 +CXT_S0 = CTX_S0 +CXT_S1 = CTX_S1 +CXT_S2 = CTX_S2 +CXT_S3 = CTX_S3 +CXT_S4 = CTX_S4 +CXT_S5 = CTX_S5 +CXT_S6 = CTX_S6 +CXT_S7 = CTX_S7 +CXT_T8 = CTX_T8 +CXT_T9 = CTX_T9 +CXT_K0 = CTX_K0 +CXT_K1 = CTX_K1 +CXT_GP = CTX_GP +CXT_SP = CTX_SP +CXT_S8 = CTX_S8 +CXT_RA = CTX_RA +CXT_MDLO = CTX_MDLO +CXT_MDHI = CTX_MDHI +CXT_CAUSE = CTX_CAUSE +CXT_EPC = CTX_EPC +CXT_SR = CTX_SR +SV_ONSTACK = 0x0001 +SV_INTERRUPT = 0x0002 +NUMBSDSIGS = (32) +def sigmask(sig): return (1L << ((sig)-1)) + +def sigmask(sig): return (1L << ((sig)-1)) + +SIG_ERR = (-1) +SIG_IGN = (1) +SIG_HOLD = (2) +SIG_DFL = (0) +NSIG = 65 +MAXSIG = (NSIG-1) +NUMSIGS = (NSIG-1) +BRK_USERBP = 0 +BRK_KERNELBP = 1 +BRK_ABORT = 2 +BRK_BD_TAKEN = 3 +BRK_BD_NOTTAKEN = 4 +BRK_SSTEPBP = 5 +BRK_OVERFLOW = 6 +BRK_DIVZERO = 7 +BRK_RANGE = 8 +BRK_PSEUDO_OP_BIT = 0x80 +BRK_PSEUDO_OP_MAX = 0x3 +BRK_CACHE_SYNC = 0x80 +BRK_SWASH_FLUSH = 0x81 +BRK_SWASH_SWTCH = 0x82 +BRK_MULOVF = 1023 + +# Included from sys/resource.h +PRIO_MIN = -20 +PRIO_MAX = 20 +PRIO_PROCESS = 0 +PRIO_PGRP = 1 +PRIO_USER = 2 +RUSAGE_SELF = 0 +RUSAGE_CHILDREN = -1 +RLIMIT_CPU = 0 +RLIMIT_FSIZE = 1 +RLIMIT_DATA = 2 +RLIMIT_STACK = 3 +RLIMIT_CORE = 4 +RLIMIT_NOFILE = 5 +RLIMIT_VMEM = 6 +RLIMIT_RSS = 7 +RLIMIT_AS = RLIMIT_VMEM +RLIM_NLIMITS = 8 +RLIM32_INFINITY = 0x7fffffff +RLIM_INFINITY = 0x7fffffff diff --git a/Lib/irix6/cddb.py b/Lib/irix6/cddb.py new file mode 100644 index 0000000..57cf3c6 --- /dev/null +++ b/Lib/irix6/cddb.py @@ -0,0 +1,208 @@ +# This file implements a class which forms an interface to the .cddb +# directory that is maintained by SGI's cdman program. +# +# Usage is as follows: +# +# import readcd +# r = readcd.Readcd() +# c = Cddb(r.gettrackinfo()) +# +# Now you can use c.artist, c.title and c.track[trackno] (where trackno +# starts at 1). When the CD is not recognized, all values will be the empty +# string. +# It is also possible to set the above mentioned variables to new values. +# You can then use c.write() to write out the changed values to the +# .cdplayerrc file. + +import string, posix, os + +_cddbrc = '.cddb' +_DB_ID_NTRACKS = 5 +_dbid_map = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ@_=+abcdefghijklmnopqrstuvwxyz' +def _dbid(v): + if v >= len(_dbid_map): + return string.zfill(v, 2) + else: + return _dbid_map[v] + +def tochash(toc): + if type(toc) == type(''): + tracklist = [] + for i in range(2, len(toc), 4): + tracklist.append((None, + (string.atoi(toc[i:i+2]), + string.atoi(toc[i+2:i+4])))) + else: + tracklist = toc + ntracks = len(tracklist) + hash = _dbid((ntracks >> 4) & 0xF) + _dbid(ntracks & 0xF) + if ntracks <= _DB_ID_NTRACKS: + nidtracks = ntracks + else: + nidtracks = _DB_ID_NTRACKS - 1 + min = 0 + sec = 0 + for track in tracklist: + start, length = track + min = min + length[0] + sec = sec + length[1] + min = min + sec / 60 + sec = sec % 60 + hash = hash + _dbid(min) + _dbid(sec) + for i in range(nidtracks): + start, length = tracklist[i] + hash = hash + _dbid(length[0]) + _dbid(length[1]) + return hash + +class Cddb: + def __init__(self, tracklist): + if os.environ.has_key('CDDB_PATH'): + path = os.environ['CDDB_PATH'] + cddb_path = string.splitfields(path, ',') + else: + home = os.environ['HOME'] + cddb_path = [home + '/' + _cddbrc] + + self._get_id(tracklist) + + for dir in cddb_path: + file = dir + '/' + self.id + '.rdb' + try: + f = open(file, 'r') + self.file = file + break + except IOError: + pass + ntracks = string.atoi(self.id[:2], 16) + self.artist = '' + self.title = '' + self.track = [None] + [''] * ntracks + self.trackartist = [None] + [''] * ntracks + self.notes = [] + if not hasattr(self, 'file'): + return + import regex + reg = regex.compile('^\\([^.]*\\)\\.\\([^:]*\\):[\t ]+\\(.*\\)') + while 1: + line = f.readline() + if not line: + break + if reg.match(line) == -1: + print 'syntax error in ' + file + continue + name1 = line[reg.regs[1][0]:reg.regs[1][1]] + name2 = line[reg.regs[2][0]:reg.regs[2][1]] + value = line[reg.regs[3][0]:reg.regs[3][1]] + if name1 == 'album': + if name2 == 'artist': + self.artist = value + elif name2 == 'title': + self.title = value + elif name2 == 'toc': + if not self.toc: + self.toc = value + if self.toc != value: + print 'toc\'s don\'t match' + elif name2 == 'notes': + self.notes.append(value) + elif name1[:5] == 'track': + try: + trackno = string.atoi(name1[5:]) + except strings.atoi_error: + print 'syntax error in ' + file + continue + if trackno > ntracks: + print 'track number ' + `trackno` + \ + ' in file ' + file + \ + ' out of range' + continue + if name2 == 'title': + self.track[trackno] = value + elif name2 == 'artist': + self.trackartist[trackno] = value + f.close() + for i in range(2, len(self.track)): + track = self.track[i] + # if track title starts with `,', use initial part + # of previous track's title + if track and track[0] == ',': + try: + off = string.index(self.track[i - 1], + ',') + except string.index_error: + pass + else: + self.track[i] = self.track[i-1][:off] \ + + track + + def _get_id(self, tracklist): + # fill in self.id and self.toc. + # if the argument is a string ending in .rdb, the part + # upto the suffix is taken as the id. + if type(tracklist) == type(''): + if tracklist[-4:] == '.rdb': + self.id = tracklist[:-4] + self.toc = '' + return + t = [] + for i in range(2, len(tracklist), 4): + t.append((None, \ + (string.atoi(tracklist[i:i+2]), \ + string.atoi(tracklist[i+2:i+4])))) + tracklist = t + ntracks = len(tracklist) + self.id = _dbid((ntracks >> 4) & 0xF) + _dbid(ntracks & 0xF) + if ntracks <= _DB_ID_NTRACKS: + nidtracks = ntracks + else: + nidtracks = _DB_ID_NTRACKS - 1 + min = 0 + sec = 0 + for track in tracklist: + start, length = track + min = min + length[0] + sec = sec + length[1] + min = min + sec / 60 + sec = sec % 60 + self.id = self.id + _dbid(min) + _dbid(sec) + for i in range(nidtracks): + start, length = tracklist[i] + self.id = self.id + _dbid(length[0]) + _dbid(length[1]) + self.toc = string.zfill(ntracks, 2) + for track in tracklist: + start, length = track + self.toc = self.toc + string.zfill(length[0], 2) + \ + string.zfill(length[1], 2) + + def write(self): + import posixpath + if os.environ.has_key('CDDB_WRITE_DIR'): + dir = os.environ['CDDB_WRITE_DIR'] + else: + dir = os.environ['HOME'] + '/' + _cddbrc + file = dir + '/' + self.id + '.rdb' + if posixpath.exists(file): + # make backup copy + posix.rename(file, file + '~') + f = open(file, 'w') + f.write('album.title:\t' + self.title + '\n') + f.write('album.artist:\t' + self.artist + '\n') + f.write('album.toc:\t' + self.toc + '\n') + for note in self.notes: + f.write('album.notes:\t' + note + '\n') + prevpref = None + for i in range(1, len(self.track)): + if self.trackartist[i]: + f.write('track'+`i`+'.artist:\t'+self.trackartist[i]+'\n') + track = self.track[i] + try: + off = string.index(track, ',') + except string.index_error: + prevpref = None + else: + if prevpref and track[:off] == prevpref: + track = track[off:] + else: + prevpref = track[:off] + f.write('track' + `i` + '.title:\t' + track + '\n') + f.close() diff --git a/Lib/irix6/cdplayer.py b/Lib/irix6/cdplayer.py new file mode 100644 index 0000000..5c2c95a --- /dev/null +++ b/Lib/irix6/cdplayer.py @@ -0,0 +1,89 @@ +# This file implements a class which forms an interface to the .cdplayerrc +# file that is maintained by SGI's cdplayer program. +# +# Usage is as follows: +# +# import readcd +# r = readcd.Readcd() +# c = Cdplayer(r.gettrackinfo()) +# +# Now you can use c.artist, c.title and c.track[trackno] (where trackno +# starts at 1). When the CD is not recognized, all values will be the empty +# string. +# It is also possible to set the above mentioned variables to new values. +# You can then use c.write() to write out the changed values to the +# .cdplayerrc file. + +cdplayerrc = '.cdplayerrc' + +class Cdplayer: + def __init__(self, tracklist): + import string + self.artist = '' + self.title = '' + if type(tracklist) == type(''): + t = [] + for i in range(2, len(tracklist), 4): + t.append((None, \ + (string.atoi(tracklist[i:i+2]), \ + string.atoi(tracklist[i+2:i+4])))) + tracklist = t + self.track = [None] + [''] * len(tracklist) + self.id = 'd' + string.zfill(len(tracklist), 2) + for track in tracklist: + start, length = track + self.id = self.id + string.zfill(length[0], 2) + \ + string.zfill(length[1], 2) + try: + import posix + f = open(posix.environ['HOME'] + '/' + cdplayerrc, 'r') + except IOError: + return + import regex + reg = regex.compile('^\\([^:]*\\):\t\\(.*\\)') + s = self.id + '.' + l = len(s) + while 1: + line = f.readline() + if line == '': + break + if line[:l] == s: + line = line[l:] + if reg.match(line) == -1: + print 'syntax error in ~/' + cdplayerrc + continue + name = line[reg.regs[1][0]:reg.regs[1][1]] + value = line[reg.regs[2][0]:reg.regs[2][1]] + if name == 'title': + self.title = value + elif name == 'artist': + self.artist = value + elif name[:5] == 'track': + trackno = string.atoi(name[6:]) + self.track[trackno] = value + f.close() + + def write(self): + import posix + filename = posix.environ['HOME'] + '/' + cdplayerrc + try: + old = open(filename, 'r') + except IOError: + old = open('/dev/null', 'r') + new = open(filename + '.new', 'w') + s = self.id + '.' + l = len(s) + while 1: + line = old.readline() + if line == '': + break + if line[:l] <> s: + new.write(line) + new.write(self.id + '.title:\t' + self.title + '\n') + new.write(self.id + '.artist:\t' + self.artist + '\n') + for i in range(1, len(self.track)): + new.write(self.id + '.track.' + `i` + ':\t' + \ + self.track[i] + '\n') + old.close() + new.close() + posix.rename(filename + '.new', filename) diff --git a/Lib/irix6/flp.doc b/Lib/irix6/flp.doc new file mode 100644 index 0000000..1a2f374 --- /dev/null +++ b/Lib/irix6/flp.doc @@ -0,0 +1,117 @@ +.SH +Module flp +.LP +The flp module loads fl-forms from fd files, as generated +by fdesign. The module is designed to be flexible enough to allow +almost anything to be done with the loaded form. +.LP +Loadform defines +two types of functions: functions to parse fd files and functions to +create the forms from the templates returned by the parse functions. +There are fairly low-level create functions that create single objects, +and convenience routines that create complete forms, including callbacks, +etc. +.LP +The exception flp.error is raised whenever an error occurs while parsing a forms +definition file or creating a form. +.SH 2 +Parsing functions +.LP +There are two parsing functions, parse_form() and parse_forms(). They +take the following form: +.LP +.ft C +ftuple = parse_form(filename, formname) +.br +ftdict = parse_forms(filename) +.IP +Parse_form parses a single form, and returns a tuple (ftmp, otmplist). +Ftmp is a template for a form, otmplist is a list of templates for +objects. See below for a description of these templates. +.IP +Parse_forms parses all forms in an fd file. It returns a dictionary of +(ftmp, otmplist) tuples, indexed by formname. +.IP +Filename is the name of the forms definition file to inspect. The functions +appends '.fd' if needed, and use 'sys.path' to locate the file. +.IP +formname is the name of the form to load. This argument is mandatory, +even if the file only contains one form. +.LP +The form template and object template are structures that contain all +the information read from the fd file, in 'natural' form. A form +template record contains the following fields: +.IP +.nf +"Name", the name of the form; +"Width", the width of the form; +"Height", the height of the form; and +"Numberofobjects", the number of objects in the form. +.LP +An object template contains the following fields: +.IP +.nf +"Class", the class of object (eg. FL.BUTTON); +"Type", the sub-class (eg. FL.NORMALBUTTON); +"Box", a list with four members: [x, y, width, height]; +"Boxtype", the type of box (eg. FL.DOWNBOX); +"Colors", a list with the two object colors; +"Alignment", the label alignment (eg. FL.ALIGNLEFT); +"Style", the label style (eg. FL.BOLDSTYLE); +"Lcol", the label color; +"Label", a string containing the label; +"Name", a string containing the name of the object; +"Callback", a string containing the callback routine name; and +"Argument", a string containing the callback routine extra argument. +.SH +Low-level create routines. +.LP +The three low-level creation routines are called as follows: +.LP +.ft C +form = create_form(form_template) +.IP +Create an fl form from a form template. Returns the form created. +.LP +.ft C +obj = create_object(form, obj_template) +.IP +Create an object in an fl form. Return the new object. +An error is raised if the object has a callback routine. +.SH +High-level create routines. +.LP +The 'standard' way to handle forms in python is to define a class +that contains the form and all the objects (insofar as they are named), +and that defines all the callback functions, and use an instance of +this class to handle the form interaction. +Flp contains three routines that simplify handling this paradigm: +.LP +.ft C +create_full_form(instance, ftuple) +.IP +This routine takes an instance of your form-handling class and an +ftuple (as returned by the parsing routines) as parameters. It inserts +the form into the instance, defines all object names and arranges that +the callback methods are called. All the names inserted into the +instance are the same as the names used for the objects, etc. in the +fd file. +.LP +.ft C +merge_full_form(instance, form, ftuple) +.IP +This function does the same as create_full_form, only it does not create +the form itself nor the 'background box' that fdesign automatically +adds to each form. This is useful if your class inherits a superclass +that already defines a skeleton form (with 'OK' and 'Cancel' buttons, +for instance), and you want to merge the new form into that existing +form. The 'form' parameter is the form to which the new objects are +added. +.LP +If you use the paradigm sketched here but need slightly more control +over object creation there is a routine that creates a single object +and inserts its name (and arranges for the callback routine to be +called): +.LP +.ft C +create_object_instance(instance, form, obj_template) diff --git a/Lib/irix6/flp.py b/Lib/irix6/flp.py new file mode 100644 index 0000000..14e2278 --- /dev/null +++ b/Lib/irix6/flp.py @@ -0,0 +1,455 @@ +# +# flp - Module to load fl forms from fd files +# +# Jack Jansen, December 1991 +# +import string +import os +import sys +import FL + +SPLITLINE = '--------------------' +FORMLINE = '=============== FORM ===============' +ENDLINE = '==============================' + +error = 'flp.error' + +################################################################## +# Part 1 - The parsing routines # +################################################################## + +# +# Externally visible function. Load form. +# +def parse_form(filename, formname): + forms = checkcache(filename) + if forms is None: + forms = parse_forms(filename) + if forms.has_key(formname): + return forms[formname] + else: + raise error, 'No such form in fd file' + +# +# Externally visible function. Load all forms. +# +def parse_forms(filename): + forms = checkcache(filename) + if forms != None: return forms + fp = _open_formfile(filename) + nforms = _parse_fd_header(fp) + forms = {} + for i in range(nforms): + form = _parse_fd_form(fp, None) + forms[form[0].Name] = form + writecache(filename, forms) + return forms + +# +# Internal: see if a cached version of the file exists +# +MAGIC = '.fdc' +_internal_cache = {} # Used by frozen scripts only +def checkcache(filename): + if _internal_cache.has_key(filename): + altforms = _internal_cache[filename] + return _unpack_cache(altforms) + import marshal + fp, filename = _open_formfile2(filename) + fp.close() + cachename = filename + 'c' + try: + fp = open(cachename, 'r') + except IOError: + #print 'flp: no cache file', cachename + return None + try: + if fp.read(4) != MAGIC: + print 'flp: bad magic word in cache file', cachename + return None + cache_mtime = rdlong(fp) + file_mtime = getmtime(filename) + if cache_mtime != file_mtime: + #print 'flp: outdated cache file', cachename + return None + #print 'flp: valid cache file', cachename + altforms = marshal.load(fp) + return _unpack_cache(altforms) + finally: + fp.close() + +def _unpack_cache(altforms): + forms = {} + for name in altforms.keys(): + altobj, altlist = altforms[name] + obj = _newobj() + obj.make(altobj) + list = [] + for altobj in altlist: + nobj = _newobj() + nobj.make(altobj) + list.append(nobj) + forms[name] = obj, list + return forms + +def rdlong(fp): + s = fp.read(4) + if len(s) != 4: return None + a, b, c, d = s[0], s[1], s[2], s[3] + return ord(a)<<24 | ord(b)<<16 | ord(c)<<8 | ord(d) + +def wrlong(fp, x): + a, b, c, d = (x>>24)&0xff, (x>>16)&0xff, (x>>8)&0xff, x&0xff + fp.write(chr(a) + chr(b) + chr(c) + chr(d)) + +def getmtime(filename): + import os + from stat import ST_MTIME + try: + return os.stat(filename)[ST_MTIME] + except os.error: + return None + +# +# Internal: write cached version of the form (parsing is too slow!) +# +def writecache(filename, forms): + import marshal + fp, filename = _open_formfile2(filename) + fp.close() + cachename = filename + 'c' + try: + fp = open(cachename, 'w') + except IOError: + print 'flp: can\'t create cache file', cachename + return # Never mind + fp.write('\0\0\0\0') # Seek back and write MAGIC when done + wrlong(fp, getmtime(filename)) + altforms = _pack_cache(forms) + marshal.dump(altforms, fp) + fp.seek(0) + fp.write(MAGIC) + fp.close() + #print 'flp: wrote cache file', cachename + +# +# External: print some statements that set up the internal cache. +# This is for use with the "freeze" script. You should call +# flp.freeze(filename) for all forms used by the script, and collect +# the output on a file in a module file named "frozenforms.py". Then +# in the main program of the script import frozenforms. +# (Don't forget to take this out when using the unfrozen version of +# the script!) +# +def freeze(filename): + forms = parse_forms(filename) + altforms = _pack_cache(forms) + print 'import flp' + print 'flp._internal_cache[', `filename`, '] =', altforms + +# +# Internal: create the data structure to be placed in the cache +# +def _pack_cache(forms): + altforms = {} + for name in forms.keys(): + obj, list = forms[name] + altobj = obj.__dict__ + altlist = [] + for obj in list: altlist.append(obj.__dict__) + altforms[name] = altobj, altlist + return altforms + +# +# Internal: Locate form file (using PYTHONPATH) and open file +# +def _open_formfile(filename): + return _open_formfile2(filename)[0] + +def _open_formfile2(filename): + if filename[-3:] <> '.fd': + filename = filename + '.fd' + if filename[0] == '/': + try: + fp = open(filename,'r') + except IOError: + fp = None + else: + for pc in sys.path: + pn = os.path.join(pc, filename) + try: + fp = open(pn, 'r') + filename = pn + break + except IOError: + fp = None + if fp == None: + raise error, 'Cannot find forms file ' + filename + return fp, filename + +# +# Internal: parse the fd file header, return number of forms +# +def _parse_fd_header(file): + # First read the magic header line + datum = _parse_1_line(file) + if datum <> ('Magic', 12321): + raise error, 'Not a forms definition file' + # Now skip until we know number of forms + while 1: + datum = _parse_1_line(file) + if type(datum) == type(()) and datum[0] == 'Numberofforms': + break + return datum[1] +# +# Internal: parse fd form, or skip if name doesn't match. +# the special value None means 'allways parse it'. +# +def _parse_fd_form(file, name): + datum = _parse_1_line(file) + if datum <> FORMLINE: + raise error, 'Missing === FORM === line' + form = _parse_object(file) + if form.Name == name or name == None: + objs = [] + for j in range(form.Numberofobjects): + obj = _parse_object(file) + objs.append(obj) + return (form, objs) + else: + for j in range(form.Numberofobjects): + _skip_object(file) + return None + +# +# Internal class: a convient place to store object info fields +# +class _newobj: + def add(self, name, value): + self.__dict__[name] = value + def make(self, dict): + for name in dict.keys(): + self.add(name, dict[name]) + +# +# Internal parsing routines. +# +def _parse_string(str): + if '\\' in str: + s = '\'' + str + '\'' + try: + return eval(s) + except: + pass + return str + +def _parse_num(str): + return eval(str) + +def _parse_numlist(str): + slist = string.split(str) + nlist = [] + for i in slist: + nlist.append(_parse_num(i)) + return nlist + +# This dictionary maps item names to parsing routines. +# If no routine is given '_parse_num' is default. +_parse_func = { \ + 'Name': _parse_string, \ + 'Box': _parse_numlist, \ + 'Colors': _parse_numlist, \ + 'Label': _parse_string, \ + 'Name': _parse_string, \ + 'Callback': _parse_string, \ + 'Argument': _parse_string } + +# This function parses a line, and returns either +# a string or a tuple (name,value) + +import regex +prog = regex.compile('^\([^:]*\): *\(.*\)') + +def _parse_line(line): + if prog.match(line) < 0: + return line + a = prog.regs + name = line[:a[1][1]] + if name[0] == 'N': + name = string.joinfields(string.split(name),'') + name = string.lower(name) + name = string.upper(name[0]) + name[1:] + value = line[a[2][0]:] + try: + pf = _parse_func[name] + except KeyError: + pf = _parse_num + value = pf(value) + return (name, value) + +def _readline(file): + line = file.readline() + if not line: + raise EOFError + return line[:-1] + +def _parse_1_line(file): + line = _readline(file) + while line == '': + line = _readline(file) + return _parse_line(line) + +def _skip_object(file): + line = '' + while not line in (SPLITLINE, FORMLINE, ENDLINE): + pos = file.tell() + line = _readline(file) + if line == FORMLINE: + file.seek(pos) + +def _parse_object(file): + obj = _newobj() + while 1: + pos = file.tell() + datum = _parse_1_line(file) + if datum in (SPLITLINE, FORMLINE, ENDLINE): + if datum == FORMLINE: + file.seek(pos) + return obj + if type(datum) <> type(()) or len(datum) <> 2: + raise error, 'Parse error, illegal line in object: '+datum + obj.add(datum[0], datum[1]) + +################################################################# +# Part 2 - High-level object/form creation routines # +################################################################# + +# +# External - Create a form an link to an instance variable. +# +def create_full_form(inst, (fdata, odatalist)): + form = create_form(fdata) + exec 'inst.'+fdata.Name+' = form\n' + for odata in odatalist: + create_object_instance(inst, form, odata) + +# +# External - Merge a form into an existing form in an instance +# variable. +# +def merge_full_form(inst, form, (fdata, odatalist)): + exec 'inst.'+fdata.Name+' = form\n' + if odatalist[0].Class <> FL.BOX: + raise error, 'merge_full_form() expects FL.BOX as first obj' + for odata in odatalist[1:]: + create_object_instance(inst, form, odata) + + +################################################################# +# Part 3 - Low-level object/form creation routines # +################################################################# + +# +# External Create_form - Create form from parameters +# +def create_form(fdata): + import fl + return fl.make_form(FL.NO_BOX, fdata.Width, fdata.Height) + +# +# External create_object - Create an object. Make sure there are +# no callbacks. Returns the object created. +# +def create_object(form, odata): + obj = _create_object(form, odata) + if odata.Callback: + raise error, 'Creating free object with callback' + return obj +# +# External create_object_instance - Create object in an instance. +# +def create_object_instance(inst, form, odata): + obj = _create_object(form, odata) + if odata.Callback: + cbfunc = eval('inst.'+odata.Callback) + obj.set_call_back(cbfunc, odata.Argument) + if odata.Name: + exec 'inst.' + odata.Name + ' = obj\n' +# +# Internal _create_object: Create the object and fill options +# +def _create_object(form, odata): + crfunc = _select_crfunc(form, odata.Class) + obj = crfunc(odata.Type, odata.Box[0], odata.Box[1], odata.Box[2], \ + odata.Box[3], odata.Label) + if not odata.Class in (FL.BEGIN_GROUP, FL.END_GROUP): + obj.boxtype = odata.Boxtype + obj.col1 = odata.Colors[0] + obj.col2 = odata.Colors[1] + obj.align = odata.Alignment + obj.lstyle = odata.Style + obj.lsize = odata.Size + obj.lcol = odata.Lcol + return obj +# +# Internal crfunc: helper function that returns correct create function +# +def _select_crfunc(fm, cl): + if cl == FL.BEGIN_GROUP: return fm.bgn_group + elif cl == FL.END_GROUP: return fm.end_group + elif cl == FL.BITMAP: return fm.add_bitmap + elif cl == FL.BOX: return fm.add_box + elif cl == FL.BROWSER: return fm.add_browser + elif cl == FL.BUTTON: return fm.add_button + elif cl == FL.CHART: return fm.add_chart + elif cl == FL.CHOICE: return fm.add_choice + elif cl == FL.CLOCK: return fm.add_clock + elif cl == FL.COUNTER: return fm.add_counter + elif cl == FL.DIAL: return fm.add_dial + elif cl == FL.FREE: return fm.add_free + elif cl == FL.INPUT: return fm.add_input + elif cl == FL.LIGHTBUTTON: return fm.add_lightbutton + elif cl == FL.MENU: return fm.add_menu + elif cl == FL.POSITIONER: return fm.add_positioner + elif cl == FL.ROUNDBUTTON: return fm.add_roundbutton + elif cl == FL.SLIDER: return fm.add_slider + elif cl == FL.VALSLIDER: return fm.add_valslider + elif cl == FL.TEXT: return fm.add_text + elif cl == FL.TIMER: return fm.add_timer + else: + raise error, 'Unknown object type: ' + `cl` + + +def test(): + import time + t0 = time.time() + if len(sys.argv) == 2: + forms = parse_forms(sys.argv[1]) + t1 = time.time() + print 'parse time:', 0.001*(t1-t0), 'sec.' + keys = forms.keys() + keys.sort() + for i in keys: + _printform(forms[i]) + elif len(sys.argv) == 3: + form = parse_form(sys.argv[1], sys.argv[2]) + t1 = time.time() + print 'parse time:', round(t1-t0, 3), 'sec.' + _printform(form) + else: + print 'Usage: test fdfile [form]' + +def _printform(form): + f = form[0] + objs = form[1] + print 'Form ', f.Name, ', size: ', f.Width, f.Height, ' Nobj ', f.Numberofobjects + for i in objs: + print ' Obj ', i.Name, ' type ', i.Class, i.Type + print ' Box ', i.Box, ' btype ', i.Boxtype + print ' Label ', i.Label, ' size/style/col/align ', i.Size,i.Style, i.Lcol, i.Alignment + print ' cols ', i.Colors + print ' cback ', i.Callback, i.Argument + +# Local variables: +# py-indent-offset: 4 +# end: diff --git a/Lib/irix6/jpeg.py b/Lib/irix6/jpeg.py new file mode 100644 index 0000000..85d6d83 --- /dev/null +++ b/Lib/irix6/jpeg.py @@ -0,0 +1,110 @@ +# Implement 'jpeg' interface using SGI's compression library + +# XXX Options 'smooth' and 'optimize' are ignored. + +# XXX It appears that compressing grayscale images doesn't work right; +# XXX the resulting file causes weirdness. + +error = 'jpeg.error' # Exception + +options = {'quality': 75, 'optimize': 0, 'smooth': 0, 'forcegray': 0} + +comp = None +decomp = None + +def compress(imgdata, width, height, bytesperpixel): + global comp + import cl, CL + if comp is None: comp = cl.OpenCompressor(CL.JPEG) + if bytesperpixel == 1: + format = CL.GRAYSCALE + elif bytesperpixel == 4: + format = CL.RGBX + if options['forcegray']: + iformat = CL.GRAYSCALE + else: + iformat = CL.YUV + # XXX How to support 'optimize'? + params = [CL.IMAGE_WIDTH, width, CL.IMAGE_HEIGHT, height, \ + CL.ORIGINAL_FORMAT, format, \ + CL.ORIENTATION, CL.BOTTOM_UP, \ + CL.QUALITY_FACTOR, options['quality'], \ + CL.INTERNAL_FORMAT, iformat, \ + ] + comp.SetParams(params) + jpegdata = comp.Compress(1, imgdata) + return jpegdata + +def decompress(jpegdata): + global decomp + import cl, CL + if decomp is None: decomp = cl.OpenDecompressor(CL.JPEG) + headersize = decomp.ReadHeader(jpegdata) + params = [CL.IMAGE_WIDTH, 0, CL.IMAGE_HEIGHT, 0, CL.INTERNAL_FORMAT, 0] + decomp.GetParams(params) + width, height, format = params[1], params[3], params[5] + if format == CL.GRAYSCALE or options['forcegray']: + format = CL.GRAYSCALE + bytesperpixel = 1 + else: + format = CL.RGBX + bytesperpixel = 4 + # XXX How to support 'smooth'? + params = [CL.ORIGINAL_FORMAT, format, \ + CL.ORIENTATION, CL.BOTTOM_UP, \ + CL.FRAME_BUFFER_SIZE, width*height*bytesperpixel] + decomp.SetParams(params) + imgdata = decomp.Decompress(1, jpegdata) + return imgdata, width, height, bytesperpixel + +def setoption(name, value): + if type(value) <> type(0): + raise TypeError, 'jpeg.setoption: numeric options only' + if name == 'forcegrey': + name = 'forcegray' + if not options.has_key(name): + raise KeyError, 'jpeg.setoption: unknown option name' + options[name] = int(value) + +def test(): + import sys + if sys.argv[1:2] == ['-g']: + del sys.argv[1] + setoption('forcegray', 1) + if not sys.argv[1:]: + sys.argv.append('/usr/local/images/data/jpg/asterix.jpg') + for file in sys.argv[1:]: + show(file) + +def show(file): + import gl, GL, DEVICE + jpegdata = open(file, 'r').read() + imgdata, width, height, bytesperpixel = decompress(jpegdata) + gl.foreground() + gl.prefsize(width, height) + win = gl.winopen(file) + if bytesperpixel == 1: + gl.cmode() + gl.pixmode(GL.PM_SIZE, 8) + gl.gconfig() + for i in range(256): + gl.mapcolor(i, i, i, i) + else: + gl.RGBmode() + gl.pixmode(GL.PM_SIZE, 32) + gl.gconfig() + gl.qdevice(DEVICE.REDRAW) + gl.qdevice(DEVICE.ESCKEY) + gl.qdevice(DEVICE.WINQUIT) + gl.qdevice(DEVICE.WINSHUT) + gl.lrectwrite(0, 0, width-1, height-1, imgdata) + while 1: + dev, val = gl.qread() + if dev in (DEVICE.ESCKEY, DEVICE.WINSHUT, DEVICE.WINQUIT): + break + if dev == DEVICE.REDRAW: + gl.lrectwrite(0, 0, width-1, height-1, imgdata) + gl.winclose(win) + # Now test the compression and write the result to a fixed filename + newjpegdata = compress(imgdata, width, height, bytesperpixel) + open('/tmp/j.jpg', 'w').write(newjpegdata) diff --git a/Lib/irix6/panel.py b/Lib/irix6/panel.py new file mode 100644 index 0000000..2c0365c --- /dev/null +++ b/Lib/irix6/panel.py @@ -0,0 +1,281 @@ +# Module 'panel' +# +# Support for the Panel library. +# Uses built-in module 'pnl'. +# Applciations should use 'panel.function' instead of 'pnl.function'; +# most 'pnl' functions are transparently exported by 'panel', +# but dopanel() is overridden and you have to use this version +# if you want to use callbacks. + + +import pnl + + +debug = 0 + + +# Test if an object is a list. +# +def is_list(x): + return type(x) == type([]) + + +# Reverse a list. +# +def reverse(list): + res = [] + for item in list: + res.insert(0, item) + return res + + +# Get an attribute of a list, which may itself be another list. +# Don't use 'prop' for name. +# +def getattrlist(list, name): + for item in list: + if item and is_list(item) and item[0] == name: + return item[1:] + return [] + + +# Get a property of a list, which may itself be another list. +# +def getproplist(list, name): + for item in list: + if item and is_list(item) and item[0] == 'prop': + if len(item) > 1 and item[1] == name: + return item[2:] + return [] + + +# Test if an actuator description contains the property 'end-of-group' +# +def is_endgroup(list): + x = getproplist(list, 'end-of-group') + return (x and x[0] == '#t') + + +# Neatly display an actuator definition given as S-expression +# the prefix string is printed before each line. +# +def show_actuator(prefix, a): + for item in a: + if not is_list(item): + print prefix, item + elif item and item[0] == 'al': + print prefix, 'Subactuator list:' + for a in item[1:]: + show_actuator(prefix + ' ', a) + elif len(item) == 2: + print prefix, item[0], '=>', item[1] + elif len(item) == 3 and item[0] == 'prop': + print prefix, 'Prop', item[1], '=>', + print item[2] + else: + print prefix, '?', item + + +# Neatly display a panel. +# +def show_panel(prefix, p): + for item in p: + if not is_list(item): + print prefix, item + elif item and item[0] == 'al': + print prefix, 'Actuator list:' + for a in item[1:]: + show_actuator(prefix + ' ', a) + elif len(item) == 2: + print prefix, item[0], '=>', item[1] + elif len(item) == 3 and item[0] == 'prop': + print prefix, 'Prop', item[1], '=>', + print item[2] + else: + print prefix, '?', item + + +# Exception raised by build_actuator or build_panel. +# +panel_error = 'panel error' + + +# Dummy callback used to initialize the callbacks. +# +def dummy_callback(arg): + pass + + +# Assign attributes to members of the target. +# Attribute names in exclist are ignored. +# The member name is the attribute name prefixed with the prefix. +# +def assign_members(target, attrlist, exclist, prefix): + for item in attrlist: + if is_list(item) and len(item) == 2 and item[0] not in exclist: + name, value = item[0], item[1] + ok = 1 + if value[0] in '-0123456789': + value = eval(value) + elif value[0] == '"': + value = value[1:-1] + elif value == 'move-then-resize': + # Strange default set by Panel Editor... + ok = 0 + else: + print 'unknown value', value, 'for', name + ok = 0 + if ok: + lhs = 'target.' + prefix + name + stmt = lhs + '=' + `value` + if debug: print 'exec', stmt + try: + exec stmt + '\n' + except KeyboardInterrupt: # Don't catch this! + raise KeyboardInterrupt + except: + print 'assign failed:', stmt + + +# Build a real actuator from an actuator descriptior. +# Return a pair (actuator, name). +# +def build_actuator(descr): + namelist = getattrlist(descr, 'name') + if namelist: + # Assume it is a string + actuatorname = namelist[0][1:-1] + else: + actuatorname = '' + type = descr[0] + if type[:4] == 'pnl_': type = type[4:] + act = pnl.mkact(type) + act.downfunc = act.activefunc = act.upfunc = dummy_callback + # + assign_members(act, descr[1:], ['al', 'data', 'name'], '') + # + # Treat actuator-specific data + # + datalist = getattrlist(descr, 'data') + prefix = '' + if type[-4:] == 'puck': + prefix = 'puck_' + elif type == 'mouse': + prefix = 'mouse_' + assign_members(act, datalist, [], prefix) + # + return act, actuatorname + + +# Build all sub-actuators and add them to the super-actuator. +# The super-actuator must already have been added to the panel. +# Sub-actuators with defined names are added as members to the panel +# so they can be referenced as p.name. +# +# Note: I have no idea how panel.endgroup() works when applied +# to a sub-actuator. +# +def build_subactuators(panel, super_act, al): + # + # This is nearly the same loop as below in build_panel(), + # except a call is made to addsubact() instead of addact(). + # + for a in al: + act, name = build_actuator(a) + act.addsubact(super_act) + if name: + stmt = 'panel.' + name + ' = act' + if debug: print 'exec', stmt + exec stmt + '\n' + if is_endgroup(a): + panel.endgroup() + sub_al = getattrlist(a, 'al') + if sub_al: + build_subactuators(panel, act, sub_al) + # + # Fix the actuator to which whe just added subactuators. + # This can't hurt (I hope) and is needed for the scroll actuator. + # + super_act.fixact() + + +# Build a real panel from a panel definition. +# Return a panel object p, where for each named actuator a, p.name is a +# reference to a. +# +def build_panel(descr): + # + # Sanity check + # + if (not descr) or descr[0] <> 'panel': + raise panel_error, 'panel description must start with "panel"' + # + if debug: show_panel('', descr) + # + # Create an empty panel + # + panel = pnl.mkpanel() + # + # Assign panel attributes + # + assign_members(panel, descr[1:], ['al'], '') + # + # Look for actuator list + # + al = getattrlist(descr, 'al') + # + # The order in which actuators are created is important + # because of the endgroup() operator. + # Unfortunately the Panel Editor outputs the actuator list + # in reverse order, so we reverse it here. + # + al = reverse(al) + # + for a in al: + act, name = build_actuator(a) + act.addact(panel) + if name: + stmt = 'panel.' + name + ' = act' + exec stmt + '\n' + if is_endgroup(a): + panel.endgroup() + sub_al = getattrlist(a, 'al') + if sub_al: + build_subactuators(panel, act, sub_al) + # + return panel + + +# Wrapper around pnl.dopanel() which calls call-back functions. +# +def my_dopanel(): + # Extract only the first 4 elements to allow for future expansion + a, down, active, up = pnl.dopanel()[:4] + if down: + down.downfunc(down) + if active: + active.activefunc(active) + if up: + up.upfunc(up) + return a + + +# Create one or more panels from a description file (S-expressions) +# generated by the Panel Editor. +# +def defpanellist(file): + import panelparser + descrlist = panelparser.parse_file(open(file, 'r')) + panellist = [] + for descr in descrlist: + panellist.append(build_panel(descr)) + return panellist + + +# Import everything from built-in method pnl, so the user can always +# use panel.foo() instead of pnl.foo(). +# This gives *no* performance penalty once this module is imported. +# +from pnl import * # for export + +dopanel = my_dopanel # override pnl.dopanel diff --git a/Lib/irix6/panelparser.py b/Lib/irix6/panelparser.py new file mode 100644 index 0000000..1b069fa --- /dev/null +++ b/Lib/irix6/panelparser.py @@ -0,0 +1,128 @@ +# Module 'parser' +# +# Parse S-expressions output by the Panel Editor +# (which is written in Scheme so it can't help writing S-expressions). +# +# See notes at end of file. + + +whitespace = ' \t\n' +operators = '()\'' +separators = operators + whitespace + ';' + '"' + + +# Tokenize a string. +# Return a list of tokens (strings). +# +def tokenize_string(s): + tokens = [] + while s: + c = s[:1] + if c in whitespace: + s = s[1:] + elif c == ';': + s = '' + elif c == '"': + n = len(s) + i = 1 + while i < n: + c = s[i] + i = i+1 + if c == '"': break + if c == '\\': i = i+1 + tokens.append(s[:i]) + s = s[i:] + elif c in operators: + tokens.append(c) + s = s[1:] + else: + n = len(s) + i = 1 + while i < n: + if s[i] in separators: break + i = i+1 + tokens.append(s[:i]) + s = s[i:] + return tokens + + +# Tokenize a whole file (given as file object, not as file name). +# Return a list of tokens (strings). +# +def tokenize_file(fp): + tokens = [] + while 1: + line = fp.readline() + if not line: break + tokens = tokens + tokenize_string(line) + return tokens + + +# Exception raised by parse_exr. +# +syntax_error = 'syntax error' + + +# Parse an S-expression. +# Input is a list of tokens as returned by tokenize_*(). +# Return a pair (expr, tokens) +# where expr is a list representing the s-expression, +# and tokens contains the remaining tokens. +# May raise syntax_error. +# +def parse_expr(tokens): + if (not tokens) or tokens[0] <> '(': + raise syntax_error, 'expected "("' + tokens = tokens[1:] + expr = [] + while 1: + if not tokens: + raise syntax_error, 'missing ")"' + if tokens[0] == ')': + return expr, tokens[1:] + elif tokens[0] == '(': + subexpr, tokens = parse_expr(tokens) + expr.append(subexpr) + else: + expr.append(tokens[0]) + tokens = tokens[1:] + + +# Parse a file (given as file object, not as file name). +# Return a list of parsed S-expressions found at the top level. +# +def parse_file(fp): + tokens = tokenize_file(fp) + exprlist = [] + while tokens: + expr, tokens = parse_expr(tokens) + exprlist.append(expr) + return exprlist + + +# EXAMPLE: +# +# The input +# '(hip (hop hur-ray))' +# +# passed to tokenize_string() returns the token list +# ['(', 'hip', '(', 'hop', 'hur-ray', ')', ')'] +# +# When this is passed to parse_expr() it returns the expression +# ['hip', ['hop', 'hur-ray']] +# plus an empty token list (because there are no tokens left. +# +# When a file containing the example is passed to parse_file() it returns +# a list whose only element is the output of parse_expr() above: +# [['hip', ['hop', 'hur-ray']]] + + +# TOKENIZING: +# +# Comments start with semicolon (;) and continue till the end of the line. +# +# Tokens are separated by whitespace, except the following characters +# always form a separate token (outside strings): +# ( ) ' +# Strings are enclosed in double quotes (") and backslash (\) is used +# as escape character in strings. diff --git a/Lib/irix6/readcd.doc b/Lib/irix6/readcd.doc new file mode 100644 index 0000000..1be549c --- /dev/null +++ b/Lib/irix6/readcd.doc @@ -0,0 +1,104 @@ +Interface to CD-ROM player. + +This module implements an interface to the built-in cd module. The +intention is to provide a more user-friendly interface than the +built-in module. + +The module defines a class Readcd with several methods. The +initialization of the class will try to open the CD player. This +means that initialization will fail if the CD player is already in +use. A RuntimeError will be raised by the cd module in that case. + +The way to work with this module is as follows. The user specifies +the parts of the CD that are to be read and he specifies callback +functions which are to be called by the system. At some point he can +tell the system to play. The specified parts of the CD will then be +read and the callbacks will be called. + +Initialization. +=============== + +r = readcd.Readcd([cd-player [, mode]]) + +The optional arguments are the name of the CD device and the mode. +When "mode" is not specified, it defaults to 'r' (which is the only +possible value); when "cd-player" also isn't specified, it defaults +to "None" which indicates the default CD player. + +Methods. +======== + +eject() -- Eject the CD from the player. + +reset() -- Reset the list of data stretches to be played. + +appendtrack(track) -- Append the specified track to the list of music +stretches. + +appendstretch(first, last) -- Append the stretch from "first" to "last" +to the list of music stretches. Both "first" and "last" can be in one +of four forms. "None": for "first", the beginning of the CD, for +"last" the end of the CD; a single integer: a track number--playing +starts at the beginning of the track or ends at the end of the +specified track; a three-tuple: the absolute time from the start of +the CD in minutes, seconds, frames; a four-tuple: track number and +relative time within the track in minutes, seconds, frames. + +settracks(tracklist) -- The argument is a list of integers. The list +of stretches is set to argument list. The old list is discarded. + +setcallback(type, func, arg) -- Set a callback function for "type". +The function will be called as func(arg, type, data) where "arg" is +the third argument of setcallback, "type" is the type of callback, +"data" is type-dependent data. See the CDsetcallback(3) manual page +for more information. The possible "type" arguments are defined in +the CD module. + +removecallback(type) -- Remove the callback for "type". + +gettrackinfo([tracklist]) -- Return a list of tuples. Each tuple +consists of start and length information of a track. The start and +length information consist of three-tuples with minutes, seconds and +frames. The optional tracklist argument gives a list of interesting +track numbers. If no tracklist is specified, information about all +tracks is returned. + +getstatus() -- Return the status information of the CD. + +play() -- Play the preprogrammed stretches of music from the CD. When +nothing was programmed, the whole CD is played. + +Specifying stretches. +===================== + +There are three methods available to specify a stretch of music to be +played. The easiest way is to use "settracklist(tracklist)" with which +a list of tracks can be specified. "settracklist(tracklist)" is +equivalent to the sequence + reset() + for track in tracklist: + appendtrack(track) + +The next method is "appendtrack(track)" with which a whole track can be +added to the list of music to be played. "appendtrack(track)" is +equivalent to "appendstretch(track, track)". + +The most complete method is "appendstretch(first, last)". Using this +method, it is possible to specify any stretch of music. + +When two consecutive tracks are played, it is possible to choose +whether the pause that may be between the tracks is played as well or +whether the pause should be skipped. When the end of a stretch is +specified using a track number and the next stretch starts at the +beginning of the following track and that was also specified using the +track number (that is, both were specified as integers, not as tuples), +the pause is played. When either value was specified using absolute +time or track-relative time (that is, as three-tuple or as +four-tuple), the pause will not be played. + +Errors. +======= + +When an error occurs, an exception will be raised. Depending on where +the error occurs, the exception may either be "readcd.Error" or +"RuntimeError". diff --git a/Lib/irix6/readcd.py b/Lib/irix6/readcd.py new file mode 100644 index 0000000..5c4b824 --- /dev/null +++ b/Lib/irix6/readcd.py @@ -0,0 +1,242 @@ +# Class interface to the CD module. + +import cd, CD + +Error = 'Readcd.Error' +_Stop = 'Readcd.Stop' + +def _doatime(self, cb_type, data): + if ((data[0] * 60) + data[1]) * 75 + data[2] > self.end: +## print 'done with list entry',`self.listindex` + raise _Stop + func, arg = self.callbacks[cb_type] + if func: + func(arg, cb_type, data) + +def _dopnum(self, cb_type, data): + if data > self.end: +## print 'done with list entry',`self.listindex` + raise _Stop + func, arg = self.callbacks[cb_type] + if func: + func(arg, cb_type, data) + +class Readcd: + def __init__(self, *arg): + if len(arg) == 0: + self.player = cd.open() + elif len(arg) == 1: + self.player = cd.open(arg[0]) + elif len(arg) == 2: + self.player = cd.open(arg[0], arg[1]) + else: + raise Error, 'bad __init__ call' + self.list = [] + self.callbacks = [(None, None)] * 8 + self.parser = cd.createparser() + self.playing = 0 + self.end = 0 + self.status = None + self.trackinfo = None + + def eject(self): + self.player.eject() + self.list = [] + self.end = 0 + self.listindex = 0 + self.status = None + self.trackinfo = None + if self.playing: +## print 'stop playing from eject' + raise _Stop + + def pmsf2msf(self, track, min, sec, frame): + if not self.status: + self.cachestatus() + if track < self.status[5] or track > self.status[6]: + raise Error, 'track number out of range' + if not self.trackinfo: + self.cacheinfo() + start, total = self.trackinfo[track] + start = ((start[0] * 60) + start[1]) * 75 + start[2] + total = ((total[0] * 60) + total[1]) * 75 + total[2] + block = ((min * 60) + sec) * 75 + frame + if block > total: + raise Error, 'out of range' + block = start + block + min, block = divmod(block, 75*60) + sec, frame = divmod(block, 75) + return min, sec, frame + + def reset(self): + self.list = [] + + def appendtrack(self, track): + self.appendstretch(track, track) + + def appendstretch(self, start, end): + if not self.status: + self.cachestatus() + if not start: + start = 1 + if not end: + end = self.status[6] + if type(end) == type(0): + if end < self.status[5] or end > self.status[6]: + raise Error, 'range error' + else: + l = len(end) + if l == 4: + prog, min, sec, frame = end + if prog < self.status[5] or prog > self.status[6]: + raise Error, 'range error' + end = self.pmsf2msf(prog, min, sec, frame) + elif l <> 3: + raise Error, 'syntax error' + if type(start) == type(0): + if start < self.status[5] or start > self.status[6]: + raise Error, 'range error' + if len(self.list) > 0: + s, e = self.list[-1] + if type(e) == type(0): + if start == e+1: + start = s + del self.list[-1] + else: + l = len(start) + if l == 4: + prog, min, sec, frame = start + if prog < self.status[5] or prog > self.status[6]: + raise Error, 'range error' + start = self.pmsf2msf(prog, min, sec, frame) + elif l <> 3: + raise Error, 'syntax error' + self.list.append((start, end)) + + def settracks(self, list): + self.list = [] + for track in list: + self.appendtrack(track) + + def setcallback(self, cb_type, func, arg): + if cb_type < 0 or cb_type >= 8: + raise Error, 'type out of range' + self.callbacks[cb_type] = (func, arg) + if self.playing: + start, end = self.list[self.listindex] + if type(end) == type(0): + if cb_type <> CD.PNUM: + self.parser.setcallback(cb_type, func, arg) + else: + if cb_type <> CD.ATIME: + self.parser.setcallback(cb_type, func, arg) + + def removecallback(self, cb_type): + if cb_type < 0 or cb_type >= 8: + raise Error, 'type out of range' + self.callbacks[cb_type] = (None, None) + if self.playing: + start, end = self.list[self.listindex] + if type(end) == type(0): + if cb_type <> CD.PNUM: + self.parser.removecallback(cb_type) + else: + if cb_type <> CD.ATIME: + self.parser.removecallback(cb_type) + + def gettrackinfo(self, *arg): + if not self.status: + self.cachestatus() + if not self.trackinfo: + self.cacheinfo() + if len(arg) == 0: + return self.trackinfo[self.status[5]:self.status[6]+1] + result = [] + for i in arg: + if i < self.status[5] or i > self.status[6]: + raise Error, 'range error' + result.append(self.trackinfo[i]) + return result + + def cacheinfo(self): + if not self.status: + self.cachestatus() + self.trackinfo = [] + for i in range(self.status[5]): + self.trackinfo.append(None) + for i in range(self.status[5], self.status[6]+1): + self.trackinfo.append(self.player.gettrackinfo(i)) + + def cachestatus(self): + self.status = self.player.getstatus() + if self.status[0] == CD.NODISC: + self.status = None + raise Error, 'no disc in player' + + def getstatus(self): + return self.player.getstatus() + + def play(self): + if not self.status: + self.cachestatus() + size = self.player.bestreadsize() + self.listindex = 0 + self.playing = 0 + for i in range(8): + func, arg = self.callbacks[i] + if func: + self.parser.setcallback(i, func, arg) + else: + self.parser.removecallback(i) + if len(self.list) == 0: + for i in range(self.status[5], self.status[6]+1): + self.appendtrack(i) + try: + while 1: + if not self.playing: + if self.listindex >= len(self.list): + return + start, end = self.list[self.listindex] + if type(start) == type(0): + dummy = self.player.seektrack( + start) + else: + min, sec, frame = start + dummy = self.player.seek( + min, sec, frame) + if type(end) == type(0): + self.parser.setcallback( + CD.PNUM, _dopnum, self) + self.end = end + func, arg = \ + self.callbacks[CD.ATIME] + if func: + self.parser.setcallback(CD.ATIME, func, arg) + else: + self.parser.removecallback(CD.ATIME) + else: + min, sec, frame = end + self.parser.setcallback( + CD.ATIME, _doatime, + self) + self.end = (min * 60 + sec) * \ + 75 + frame + func, arg = \ + self.callbacks[CD.PNUM] + if func: + self.parser.setcallback(CD.PNUM, func, arg) + else: + self.parser.removecallback(CD.PNUM) + self.playing = 1 + data = self.player.readda(size) + if data == '': + self.playing = 0 + self.listindex = self.listindex + 1 + continue + try: + self.parser.parseframe(data) + except _Stop: + self.playing = 0 + self.listindex = self.listindex + 1 + finally: + self.playing = 0 diff --git a/Lib/irix6/regen b/Lib/irix6/regen new file mode 100755 index 0000000..4c4ea5c --- /dev/null +++ b/Lib/irix6/regen @@ -0,0 +1,13 @@ +#! /bin/sh +case `uname -sr` in +'IRIX '[45].*) ;; +*) echo Probably not on an IRIX system 1>&2 + exit 1;; +esac +set -v +h2py /usr/include/sys/fcntl.h +h2py /usr/include/sys/file.h +h2py /usr/include/sys/socket.h +h2py -i '(u_long)' /usr/include/netinet/in.h +h2py /usr/include/sys/termios.h +h2py /usr/include/errno.h diff --git a/Lib/irix6/torgb.py b/Lib/irix6/torgb.py new file mode 100644 index 0000000..f283063 --- /dev/null +++ b/Lib/irix6/torgb.py @@ -0,0 +1,97 @@ +# Convert "arbitrary" image files to rgb files (SGI's image format). +# Input may be compressed. +# The uncompressed file type may be PBM, PGM, PPM, GIF, TIFF, or Sun raster. +# An exception is raised if the file is not of a recognized type. +# Returned filename is either the input filename or a temporary filename; +# in the latter case the caller must ensure that it is removed. +# Other temporary files used are removed by the function. + +import os +import tempfile +import pipes +import imghdr + +table = {} + +t = pipes.Template() +t.append('fromppm $IN $OUT', 'ff') +table['ppm'] = t + +t = pipes.Template() +t.append('(PATH=$PATH:/ufs/guido/bin/sgi; exec pnmtoppm)', '--') +t.append('fromppm $IN $OUT', 'ff') +table['pnm'] = t +table['pgm'] = t +table['pbm'] = t + +t = pipes.Template() +t.append('fromgif $IN $OUT', 'ff') +table['gif'] = t + +t = pipes.Template() +t.append('tifftopnm', '--') +t.append('(PATH=$PATH:/ufs/guido/bin/sgi; exec pnmtoppm)', '--') +t.append('fromppm $IN $OUT', 'ff') +table['tiff'] = t + +t = pipes.Template() +t.append('rasttopnm', '--') +t.append('(PATH=$PATH:/ufs/guido/bin/sgi; exec pnmtoppm)', '--') +t.append('fromppm $IN $OUT', 'ff') +table['rast'] = t + +t = pipes.Template() +t.append('djpeg', '--') +t.append('(PATH=$PATH:/ufs/guido/bin/sgi; exec pnmtoppm)', '--') +t.append('fromppm $IN $OUT', 'ff') +table['jpeg'] = t + +uncompress = pipes.Template() +uncompress.append('uncompress', '--') + + +error = 'torgb.error' # Exception + +def torgb(filename): + temps = [] + ret = None + try: + ret = _torgb(filename, temps) + finally: + for temp in temps[:]: + if temp <> ret: + try: + os.unlink(temp) + except os.error: + pass + temps.remove(temp) + return ret + +def _torgb(filename, temps): + if filename[-2:] == '.Z': + fname = tempfile.mktemp() + temps.append(fname) + sts = uncompress.copy(filename, fname) + if sts: + raise error, filename + ': uncompress failed' + else: + fname = filename + try: + ftype = imghdr.what(fname) + except IOError, msg: + if type(msg) == type(()) and len(msg) == 2 and \ + type(msg[0]) == type(0) and type(msg[1]) == type(''): + msg = msg[1] + if type(msg) <> type(''): + msg = `msg` + raise error, filename + ': ' + msg + if ftype == 'rgb': + return fname + if ftype == None or not table.has_key(ftype): + raise error, \ + filename + ': unsupported image file type ' + `ftype` + temp = tempfile.mktemp() + sts = table[ftype].copy(fname, temp) + if sts: + raise error, filename + ': conversion to rgb failed' + return temp diff --git a/Lib/plat-irix6/AL.py b/Lib/plat-irix6/AL.py new file mode 100644 index 0000000..ed17cde --- /dev/null +++ b/Lib/plat-irix6/AL.py @@ -0,0 +1,61 @@ +RATE_48000 = 48000 +RATE_44100 = 44100 +RATE_32000 = 32000 +RATE_22050 = 22050 +RATE_16000 = 16000 +RATE_11025 = 11025 +RATE_8000 = 8000 + +SAMPFMT_TWOSCOMP= 1 +SAMPFMT_FLOAT = 32 +SAMPFMT_DOUBLE = 64 + +SAMPLE_8 = 1 +SAMPLE_16 = 2 + # SAMPLE_24 is the low 24 bits of a long, sign extended to 32 bits +SAMPLE_24 = 4 + +MONO = 1 +STEREO = 2 +QUADRO = 4 # 4CHANNEL is not a legal Python name + +INPUT_LINE = 0 +INPUT_MIC = 1 +INPUT_DIGITAL = 2 + +MONITOR_OFF = 0 +MONITOR_ON = 1 + +ERROR_NUMBER = 0 +ERROR_TYPE = 1 +ERROR_LOCATION_LSP = 2 +ERROR_LOCATION_MSP = 3 +ERROR_LENGTH = 4 + +ERROR_INPUT_UNDERFLOW = 0 +ERROR_OUTPUT_OVERFLOW = 1 + +# These seem to be not supported anymore: +##HOLD, RELEASE = 0, 1 +##ATTAIL, ATHEAD, ATMARK, ATTIME = 0, 1, 2, 3 + +DEFAULT_DEVICE = 1 + +INPUT_SOURCE = 0 +LEFT_INPUT_ATTEN = 1 +RIGHT_INPUT_ATTEN = 2 +INPUT_RATE = 3 +OUTPUT_RATE = 4 +LEFT_SPEAKER_GAIN = 5 +RIGHT_SPEAKER_GAIN = 6 +INPUT_COUNT = 7 +OUTPUT_COUNT = 8 +UNUSED_COUNT = 9 +SYNC_INPUT_TO_AES = 10 +SYNC_OUTPUT_TO_AES = 11 +MONITOR_CTL = 12 +LEFT_MONITOR_ATTEN = 13 +RIGHT_MONITOR_ATTEN = 14 + +ENUM_VALUE = 0 # only certain values are valid +RANGE_VALUE = 1 # any value in range is valid diff --git a/Lib/plat-irix6/AWARE.py b/Lib/plat-irix6/AWARE.py new file mode 100644 index 0000000..30be50b --- /dev/null +++ b/Lib/plat-irix6/AWARE.py @@ -0,0 +1,54 @@ +# +# Copyright (c) 1992 Aware, Inc. All rights reserved. +# +# Copyright Unpublished, Aware Inc. All Rights Reserved. +# This software contains proprietary and confidential +# information of Aware, Inc. Use, disclosure or +# reproduction is prohibited without the prior express +# written consent of Aware, Inc. +# +# + +# +# awareAudio.h - Aware Compression Library Parameter Header +# +# 01/21/92 Original Version by Brian Knittel and Jonathon Devine +# + +import CL + +# Aware Audio Specific Parameters - For both MPEG Audio and Multirate +CL.CHANNEL_POLICY = CL.NUMBER_OF_PARAMS + 0 +CL.NOISE_MARGIN = CL.NUMBER_OF_PARAMS + 1 +CL.BITRATE_POLICY = CL.NUMBER_OF_PARAMS + 2 + +# Additional parameters for MPEG Audio +CL.BITRATE_TARGET = CL.NUMBER_OF_PARAMS + 3 +CL.LAYER = CL.NUMBER_OF_PARAMS + 4 + +# read/write for compression configuration +# read for state during compression/decompression + +# +# Channel Policy +# +AWCMP_STEREO = 1 +AWCMP_JOINT_STEREO = 2 +AWCMP_INDEPENDENT = 3 + +# +# read/write for compression configuration, +# read for state during compression +# +# +# Bit-rate Policy +# +AWCMP_FIXED_RATE = 1 +AWCMP_CONST_QUAL = 2 +AWCMP_LOSSLESS = 4 + +# +# Layer values +# +AWCMP_MPEG_LAYER_I = 1 +AWCMP_MPEG_LAYER_II = 2 diff --git a/Lib/plat-irix6/CD.py b/Lib/plat-irix6/CD.py new file mode 100644 index 0000000..ad56561 --- /dev/null +++ b/Lib/plat-irix6/CD.py @@ -0,0 +1,34 @@ +ERROR = 0 +NODISC = 1 +READY = 2 +PLAYING = 3 +PAUSED = 4 +STILL = 5 + +AUDIO = 0 +PNUM = 1 +INDEX = 2 +PTIME = 3 +ATIME = 4 +CATALOG = 5 +IDENT = 6 +CONTROL = 7 + +CDDA_DATASIZE = 2352 + +##CDDA_SUBCODESIZE = (sizeof(struct subcodeQ)) +##CDDA_BLOCKSIZE = (sizeof(struct cdframe)) +##CDDA_NUMSAMPLES = (CDDA_DATASIZE/2) +## +##CDQ_PREEMP_MASK = 0xd +##CDQ_COPY_MASK = 0xb +##CDQ_DDATA_MASK = 0xd +##CDQ_BROADCAST_MASK = 0x8 +##CDQ_PREEMPHASIS = 0x1 +##CDQ_COPY_PERMITTED = 0x2 +##CDQ_DIGITAL_DATA = 0x4 +##CDQ_BROADCAST_USE = 0x8 +## +##CDQ_MODE1 = 0x1 +##CDQ_MODE2 = 0x2 +##CDQ_MODE3 = 0x3 diff --git a/Lib/plat-irix6/CL.py b/Lib/plat-irix6/CL.py new file mode 100644 index 0000000..468ecaa --- /dev/null +++ b/Lib/plat-irix6/CL.py @@ -0,0 +1,24 @@ +# Backward compatible module CL. +# All relevant symbols are now defined in the module cl. +try: + from cl import * +except ImportError: + from CL_old import * +else: + del CompressImage + del DecompressImage + del GetAlgorithmName + del OpenCompressor + del OpenDecompressor + del QueryAlgorithms + del QueryMaxHeaderSize + del QueryScheme + del QuerySchemeFromName + del SetDefault + del SetMax + del SetMin + try: + del cvt_type + except NameError: + pass + del error diff --git a/Lib/plat-irix6/DEVICE.py b/Lib/plat-irix6/DEVICE.py new file mode 100644 index 0000000..7ace8cb --- /dev/null +++ b/Lib/plat-irix6/DEVICE.py @@ -0,0 +1,400 @@ +NULLDEV = 0 +BUTOFFSET = 1 +VALOFFSET = 256 +PSEUDOFFSET = 512 +BUT2OFFSET = 3840 +TIMOFFSET = 515 +XKBDOFFSET = 143 +BUTCOUNT = 255 +VALCOUNT = 256 +TIMCOUNT = 4 +XKBDCOUNT = 28 +USERBUTOFFSET = 4096 +USERVALOFFSET = 12288 +USERPSEUDOFFSET = 16384 +BUT0 = 1 +BUT1 = 2 +BUT2 = 3 +BUT3 = 4 +BUT4 = 5 +BUT5 = 6 +BUT6 = 7 +BUT7 = 8 +BUT8 = 9 +BUT9 = 10 +BUT10 = 11 +BUT11 = 12 +BUT12 = 13 +BUT13 = 14 +BUT14 = 15 +BUT15 = 16 +BUT16 = 17 +BUT17 = 18 +BUT18 = 19 +BUT19 = 20 +BUT20 = 21 +BUT21 = 22 +BUT22 = 23 +BUT23 = 24 +BUT24 = 25 +BUT25 = 26 +BUT26 = 27 +BUT27 = 28 +BUT28 = 29 +BUT29 = 30 +BUT30 = 31 +BUT31 = 32 +BUT32 = 33 +BUT33 = 34 +BUT34 = 35 +BUT35 = 36 +BUT36 = 37 +BUT37 = 38 +BUT38 = 39 +BUT39 = 40 +BUT40 = 41 +BUT41 = 42 +BUT42 = 43 +BUT43 = 44 +BUT44 = 45 +BUT45 = 46 +BUT46 = 47 +BUT47 = 48 +BUT48 = 49 +BUT49 = 50 +BUT50 = 51 +BUT51 = 52 +BUT52 = 53 +BUT53 = 54 +BUT54 = 55 +BUT55 = 56 +BUT56 = 57 +BUT57 = 58 +BUT58 = 59 +BUT59 = 60 +BUT60 = 61 +BUT61 = 62 +BUT62 = 63 +BUT63 = 64 +BUT64 = 65 +BUT65 = 66 +BUT66 = 67 +BUT67 = 68 +BUT68 = 69 +BUT69 = 70 +BUT70 = 71 +BUT71 = 72 +BUT72 = 73 +BUT73 = 74 +BUT74 = 75 +BUT75 = 76 +BUT76 = 77 +BUT77 = 78 +BUT78 = 79 +BUT79 = 80 +BUT80 = 81 +BUT81 = 82 +BUT82 = 83 +MAXKBDBUT = 83 +BUT100 = 101 +BUT101 = 102 +BUT102 = 103 +BUT103 = 104 +BUT104 = 105 +BUT105 = 106 +BUT106 = 107 +BUT107 = 108 +BUT108 = 109 +BUT109 = 110 +BUT110 = 111 +BUT111 = 112 +BUT112 = 113 +BUT113 = 114 +BUT114 = 115 +BUT115 = 116 +BUT116 = 117 +BUT117 = 118 +BUT118 = 119 +BUT119 = 120 +BUT120 = 121 +BUT121 = 122 +BUT122 = 123 +BUT123 = 124 +BUT124 = 125 +BUT125 = 126 +BUT126 = 127 +BUT127 = 128 +BUT128 = 129 +BUT129 = 130 +BUT130 = 131 +BUT131 = 132 +BUT132 = 133 +BUT133 = 134 +BUT134 = 135 +BUT135 = 136 +BUT136 = 137 +BUT137 = 138 +BUT138 = 139 +BUT139 = 140 +BUT140 = 141 +BUT141 = 142 +BUT142 = 143 +BUT143 = 144 +BUT144 = 145 +BUT145 = 146 +BUT146 = 147 +BUT147 = 148 +BUT148 = 149 +BUT149 = 150 +BUT150 = 151 +BUT151 = 152 +BUT152 = 153 +BUT153 = 154 +BUT154 = 155 +BUT155 = 156 +BUT156 = 157 +BUT157 = 158 +BUT158 = 159 +BUT159 = 160 +BUT160 = 161 +BUT161 = 162 +BUT162 = 163 +BUT163 = 164 +BUT164 = 165 +BUT165 = 166 +BUT166 = 167 +BUT167 = 168 +BUT168 = 169 +BUT181 = 182 +BUT182 = 183 +BUT183 = 184 +BUT184 = 185 +BUT185 = 186 +BUT186 = 187 +BUT187 = 188 +BUT188 = 189 +BUT189 = 190 +MOUSE1 = 101 +MOUSE2 = 102 +MOUSE3 = 103 +LEFTMOUSE = 103 +MIDDLEMOUSE = 102 +RIGHTMOUSE = 101 +LPENBUT = 104 +BPAD0 = 105 +BPAD1 = 106 +BPAD2 = 107 +BPAD3 = 108 +LPENVALID = 109 +SWBASE = 111 +SW0 = 111 +SW1 = 112 +SW2 = 113 +SW3 = 114 +SW4 = 115 +SW5 = 116 +SW6 = 117 +SW7 = 118 +SW8 = 119 +SW9 = 120 +SW10 = 121 +SW11 = 122 +SW12 = 123 +SW13 = 124 +SW14 = 125 +SW15 = 126 +SW16 = 127 +SW17 = 128 +SW18 = 129 +SW19 = 130 +SW20 = 131 +SW21 = 132 +SW22 = 133 +SW23 = 134 +SW24 = 135 +SW25 = 136 +SW26 = 137 +SW27 = 138 +SW28 = 139 +SW29 = 140 +SW30 = 141 +SW31 = 142 +SBBASE = 182 +SBPICK = 182 +SBBUT1 = 183 +SBBUT2 = 184 +SBBUT3 = 185 +SBBUT4 = 186 +SBBUT5 = 187 +SBBUT6 = 188 +SBBUT7 = 189 +SBBUT8 = 190 +AKEY = 11 +BKEY = 36 +CKEY = 28 +DKEY = 18 +EKEY = 17 +FKEY = 19 +GKEY = 26 +HKEY = 27 +IKEY = 40 +JKEY = 34 +KKEY = 35 +LKEY = 42 +MKEY = 44 +NKEY = 37 +OKEY = 41 +PKEY = 48 +QKEY = 10 +RKEY = 24 +SKEY = 12 +TKEY = 25 +UKEY = 33 +VKEY = 29 +WKEY = 16 +XKEY = 21 +YKEY = 32 +ZKEY = 20 +ZEROKEY = 46 +ONEKEY = 8 +TWOKEY = 14 +THREEKEY = 15 +FOURKEY = 22 +FIVEKEY = 23 +SIXKEY = 30 +SEVENKEY = 31 +EIGHTKEY = 38 +NINEKEY = 39 +BREAKKEY = 1 +SETUPKEY = 2 +CTRLKEY = 3 +LEFTCTRLKEY = CTRLKEY +CAPSLOCKKEY = 4 +RIGHTSHIFTKEY = 5 +LEFTSHIFTKEY = 6 +NOSCRLKEY = 13 +ESCKEY = 7 +TABKEY = 9 +RETKEY = 51 +SPACEKEY = 83 +LINEFEEDKEY = 60 +BACKSPACEKEY = 61 +DELKEY = 62 +SEMICOLONKEY = 43 +PERIODKEY = 52 +COMMAKEY = 45 +QUOTEKEY = 50 +ACCENTGRAVEKEY = 55 +MINUSKEY = 47 +VIRGULEKEY = 53 +BACKSLASHKEY = 57 +EQUALKEY = 54 +LEFTBRACKETKEY = 49 +RIGHTBRACKETKEY = 56 +LEFTARROWKEY = 73 +DOWNARROWKEY = 74 +RIGHTARROWKEY = 80 +UPARROWKEY = 81 +PAD0 = 59 +PAD1 = 58 +PAD2 = 64 +PAD3 = 65 +PAD4 = 63 +PAD5 = 69 +PAD6 = 70 +PAD7 = 67 +PAD8 = 68 +PAD9 = 75 +PADPF1 = 72 +PADPF2 = 71 +PADPF3 = 79 +PADPF4 = 78 +PADPERIOD = 66 +PADMINUS = 76 +PADCOMMA = 77 +PADENTER = 82 +LEFTALTKEY = 143 +RIGHTALTKEY = 144 +RIGHTCTRLKEY = 145 +F1KEY = 146 +F2KEY = 147 +F3KEY = 148 +F4KEY = 149 +F5KEY = 150 +F6KEY = 151 +F7KEY = 152 +F8KEY = 153 +F9KEY = 154 +F10KEY = 155 +F11KEY = 156 +F12KEY = 157 +PRINTSCREENKEY = 158 +SCROLLLOCKKEY = 159 +PAUSEKEY = 160 +INSERTKEY = 161 +HOMEKEY = 162 +PAGEUPKEY = 163 +ENDKEY = 164 +PAGEDOWNKEY = 165 +NUMLOCKKEY = 166 +PADVIRGULEKEY = 167 +PADASTERKEY = 168 +PADPLUSKEY = 169 +SGIRESERVED = 256 +DIAL0 = 257 +DIAL1 = 258 +DIAL2 = 259 +DIAL3 = 260 +DIAL4 = 261 +DIAL5 = 262 +DIAL6 = 263 +DIAL7 = 264 +DIAL8 = 265 +MOUSEX = 266 +MOUSEY = 267 +LPENX = 268 +LPENY = 269 +BPADX = 270 +BPADY = 271 +CURSORX = 272 +CURSORY = 273 +GHOSTX = 274 +GHOSTY = 275 +SBTX = 276 +SBTY = 277 +SBTZ = 278 +SBRX = 279 +SBRY = 280 +SBRZ = 281 +SBPERIOD = 282 +TIMER0 = 515 +TIMER1 = 516 +TIMER2 = 517 +TIMER3 = 518 +KEYBD = 513 +RAWKEYBD = 514 +VALMARK = 523 +REDRAW = 528 +INPUTCHANGE = 534 +QFULL = 535 +QREADERROR = 538 +WINFREEZE = 539 +WINTHAW = 540 +REDRAWICONIC = 541 +WINQUIT = 542 +DEPTHCHANGE = 543 +WINSHUT = 546 +DRAWOVERLAY = 547 +VIDEO = 548 +MENUBUTTON = RIGHTMOUSE +WINCLOSE = 537 +KEYBDFNAMES = 544 +KEYBDFSTRINGS = 545 +MAXSGIDEVICE = 20000 +GERROR = 524 +WMSEND = 529 +WMREPLY = 530 +WMGFCLOSE = 531 +WMTXCLOSE = 532 +MODECHANGE = 533 +PIECECHANGE = 536 diff --git a/Lib/plat-irix6/ERRNO.py b/Lib/plat-irix6/ERRNO.py new file mode 100644 index 0000000..d975ce6 --- /dev/null +++ b/Lib/plat-irix6/ERRNO.py @@ -0,0 +1,163 @@ +# Generated by h2py from /usr/include/sys/errno.h + +# Included from standards.h +__KBASE = 1000 +__IRIXBASE = 1000 +EPERM = 1 +ENOENT = 2 +ESRCH = 3 +EINTR = 4 +EIO = 5 +ENXIO = 6 +E2BIG = 7 +ENOEXEC = 8 +EBADF = 9 +ECHILD = 10 +EAGAIN = 11 +ENOMEM = 12 +EACCES = 13 +EFAULT = 14 +ENOTBLK = 15 +EBUSY = 16 +EEXIST = 17 +EXDEV = 18 +ENODEV = 19 +ENOTDIR = 20 +EISDIR = 21 +EINVAL = 22 +ENFILE = 23 +EMFILE = 24 +ENOTTY = 25 +ETXTBSY = 26 +EFBIG = 27 +ENOSPC = 28 +ESPIPE = 29 +EROFS = 30 +EMLINK = 31 +EPIPE = 32 +EDOM = 33 +ERANGE = 34 +ENOMSG = 35 +EIDRM = 36 +ECHRNG = 37 +EL2NSYNC = 38 +EL3HLT = 39 +EL3RST = 40 +ELNRNG = 41 +EUNATCH = 42 +ENOCSI = 43 +EL2HLT = 44 +EDEADLK = 45 +ENOLCK = 46 +EBADE = 50 +EBADR = 51 +EXFULL = 52 +ENOANO = 53 +EBADRQC = 54 +EBADSLT = 55 +EDEADLOCK = 56 +EBFONT = 57 +ENOSTR = 60 +ENODATA = 61 +ETIME = 62 +ENOSR = 63 +ENONET = 64 +ENOPKG = 65 +EREMOTE = 66 +ENOLINK = 67 +EADV = 68 +ESRMNT = 69 +ECOMM = 70 +EPROTO = 71 +EMULTIHOP = 74 +EBADMSG = 77 +ENAMETOOLONG = 78 +EOVERFLOW = 79 +ENOTUNIQ = 80 +EBADFD = 81 +EREMCHG = 82 +ELIBACC = 83 +ELIBBAD = 84 +ELIBSCN = 85 +ELIBMAX = 86 +ELIBEXEC = 87 +EILSEQ = 88 +ENOSYS = 89 +ELOOP = 90 +ERESTART = 91 +ESTRPIPE = 92 +ENOTEMPTY = 93 +EUSERS = 94 +ENOTSOCK = 95 +EDESTADDRREQ = 96 +EMSGSIZE = 97 +EPROTOTYPE = 98 +ENOPROTOOPT = 99 +EPROTONOSUPPORT = 120 +ESOCKTNOSUPPORT = 121 +EOPNOTSUPP = 122 +EPFNOSUPPORT = 123 +EAFNOSUPPORT = 124 +EADDRINUSE = 125 +EADDRNOTAVAIL = 126 +ENETDOWN = 127 +ENETUNREACH = 128 +ENETRESET = 129 +ECONNABORTED = 130 +ECONNRESET = 131 +ENOBUFS = 132 +EISCONN = 133 +ENOTCONN = 134 +ESHUTDOWN = 143 +ETOOMANYREFS = 144 +ETIMEDOUT = 145 +ECONNREFUSED = 146 +EHOSTDOWN = 147 +EHOSTUNREACH = 148 +LASTERRNO = ENOTCONN +EWOULDBLOCK = __KBASE+101 +EWOULDBLOCK = EAGAIN +EALREADY = 149 +EINPROGRESS = 150 +ESTALE = 151 +EIORESID = 500 +EUCLEAN = 135 +ENOTNAM = 137 +ENAVAIL = 138 +EISNAM = 139 +EREMOTEIO = 140 +EINIT = 141 +EREMDEV = 142 +ECANCELED = 158 +ENOLIMFILE = 1001 +EPROCLIM = 1002 +EDISJOINT = 1003 +ENOLOGIN = 1004 +ELOGINLIM = 1005 +EGROUPLOOP = 1006 +ENOATTACH = 1007 +ENOTSUP = 1008 +ENOATTR = 1009 +EDIRCORRUPTED = 1010 +EDQUOT = 1133 +ENFSREMOTE = 1135 +ECONTROLLER = 1300 +ENOTCONTROLLER = 1301 +EENQUEUED = 1302 +ENOTENQUEUED = 1303 +EJOINED = 1304 +ENOTJOINED = 1305 +ENOPROC = 1306 +EMUSTRUN = 1307 +ENOTSTOPPED = 1308 +ECLOCKCPU = 1309 +EINVALSTATE = 1310 +ENOEXIST = 1311 +EENDOFMINOR = 1312 +EBUFSIZE = 1313 +EEMPTY = 1314 +ENOINTRGROUP = 1315 +EINVALMODE = 1316 +ECANTEXTENT = 1317 +EINVALTIME = 1318 +EDESTROYED = 1319 diff --git a/Lib/plat-irix6/FCNTL.py b/Lib/plat-irix6/FCNTL.py new file mode 100644 index 0000000..ceb1071 --- /dev/null +++ b/Lib/plat-irix6/FCNTL.py @@ -0,0 +1,114 @@ +# Generated by h2py from /usr/include/sys/fcntl.h + +# Included from standards.h + +# Included from sys/types.h + +# Included from sgidefs.h +_MIPS_ISA_MIPS1 = 1 +_MIPS_ISA_MIPS2 = 2 +_MIPS_ISA_MIPS3 = 3 +_MIPS_ISA_MIPS4 = 4 +_MIPS_SIM_ABI32 = 1 +_MIPS_SIM_NABI32 = 2 +_MIPS_SIM_ABI64 = 3 +P_MYID = (-1) +P_MYHOSTID = (-1) + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 +FNDELAY = 0x04 +FAPPEND = 0x08 +FSYNC = 0x10 +FDSYNC = 0x20 +FRSYNC = 0x40 +FNONBLOCK = 0x80 +FASYNC = 0x1000 +FLARGEFILE = 0x2000 +FNONBLK = FNONBLOCK +FDIRECT = 0x8000 +FDIRENT64 = 0x8000 +FCREAT = 0x0100 +FTRUNC = 0x0200 +FEXCL = 0x0400 +FNOCTTY = 0x0800 +O_RDONLY = 0 +O_WRONLY = 1 +O_RDWR = 2 +O_NDELAY = 0x04 +O_APPEND = 0x08 +O_SYNC = 0x10 +O_DSYNC = 0x20 +O_RSYNC = 0x40 +O_NONBLOCK = 0x80 +O_LARGEFILE = 0x2000 +O_DIRECT = 0x8000 +O_CREAT = 0x100 +O_TRUNC = 0x200 +O_EXCL = 0x400 +O_NOCTTY = 0x800 +F_DUPFD = 0 +F_GETFD = 1 +F_SETFD = 2 +F_GETFL = 3 +F_SETFL = 4 +F_GETLK = 14 +F_SETLK = 6 +F_SETLKW = 7 +F_CHKFL = 8 +F_ALLOCSP = 10 +F_FREESP = 11 +F_SETBSDLK = 12 +F_SETBSDLKW = 13 +F_DIOINFO = 30 +F_FSGETXATTR = 31 +F_FSSETXATTR = 32 +F_GETLK64 = 33 +F_SETLK64 = 34 +F_SETLKW64 = 35 +F_ALLOCSP64 = 36 +F_FREESP64 = 37 +F_GETBMAP = 38 +F_FSSETDM = 39 +F_RESVSP = 40 +F_UNRESVSP = 41 +F_RESVSP64 = 42 +F_UNRESVSP64 = 43 +F_GETBMAPA = 44 +F_FSGETXATTRA = 45 +F_GETALLLK = 46 +F_RSETLK = 20 +F_RGETLK = 21 +F_RSETLKW = 22 +F_GETOWN = 23 +F_SETOWN = 24 +F_RDLCK = 01 +F_WRLCK = 02 +F_UNLCK = 03 +O_ACCMODE = 3 +FD_CLOEXEC = 1 +FD_NODUP_FORK = 4 diff --git a/Lib/plat-irix6/FILE.py b/Lib/plat-irix6/FILE.py new file mode 100644 index 0000000..e3393b6 --- /dev/null +++ b/Lib/plat-irix6/FILE.py @@ -0,0 +1,236 @@ +# Generated by h2py from /usr/include/sys/file.h + +# Included from standards.h + +# Included from sys/types.h + +# Included from sgidefs.h +_MIPS_ISA_MIPS1 = 1 +_MIPS_ISA_MIPS2 = 2 +_MIPS_ISA_MIPS3 = 3 +_MIPS_ISA_MIPS4 = 4 +_MIPS_SIM_ABI32 = 1 +_MIPS_SIM_NABI32 = 2 +_MIPS_SIM_ABI64 = 3 +P_MYID = (-1) +P_MYHOSTID = (-1) + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 + +# Included from sys/sema.h +MUTEX_DEFAULT = 0x0 +METER_NAMSZ = 8 +def mutex_spinlock(l): return splhi() + +def mutex_spintrylock(l): return splhi() + +def spinlock_islocked(l): return issplhi(getsr()) + +def spinlock_initialized(l): return 1 + +SV_FIFO = 0x0 +SV_LIFO = 0x2 +SV_PRIO = 0x4 +SV_DEFAULT = SV_FIFO +SEMA_NOHIST = 0x0001 +SEMA_LOCK = 0x0004 +SEMA_METER = 0x0008 +SEMA_NAMSZ = METER_NAMSZ +MR_ACCESS = 0x1 +MR_UPDATE = 0x2 +def mp_mutex_unlock(m): return mutex_unlock(m) + +def mp_mutex_trylock(m): return mutex_trylock(m) + +def mp_mutex_spinlock(m): return mutex_spinlock(m) + +def mp_mutex_trylock(m): return 1 + +def mp_mutex_spinlock(m): return 1 + +def nested_spintrylock(m): return 1 + +def mp_mrunlock(a): return mrunlock(a) + +def mp_cpsema(x): return cpsema(x) + +def mp_cvsema(x): return cvsema(x) + +def mp_cpsema(x): return 1 + +def mp_cvsema(x): return 0 + +MON_LOCKED = 0x01 +MON_WAITING = 0x02 +MON_TIMEOUT = 0x04 +def initlock(l): return spinlock_init(l,0) + +def ownlock(x): return 1 + +def splock(x): return 1 + +def io_splock(x): return 1 + +def mutex_enter(m): return mutex_lock(m, PZERO) + +def mutex_tryenter(m): return mutex_trylock(m) + +def mutex_exit(m): return mutex_unlock(m) + +def cv_signal(cv): return sv_signal(cv) + +def cv_broadcast(cv): return sv_broadcast(cv) + +def cv_destroy(cv): return sv_destroy(cv) + +RW_READER = MR_ACCESS +RW_WRITER = MR_UPDATE +def rw_exit(r): return mrunlock(r) + +def rw_tryupgrade(r): return cmrpromote(r) + +def rw_downgrade(r): return mrdemote(r) + +def rw_destroy(r): return mrfree(r) + +def RW_WRITE_HELD(r): return ismrlocked(r, MR_UPDATE) + +def RW_READ_HELD(r): return ismrlocked(r, MR_ACCESS) + + +# Included from sys/fcntl.h +FNDELAY = 0x04 +FAPPEND = 0x08 +FSYNC = 0x10 +FDSYNC = 0x20 +FRSYNC = 0x40 +FNONBLOCK = 0x80 +FASYNC = 0x1000 +FLARGEFILE = 0x2000 +FNONBLK = FNONBLOCK +FDIRECT = 0x8000 +FDIRENT64 = 0x8000 +FCREAT = 0x0100 +FTRUNC = 0x0200 +FEXCL = 0x0400 +FNOCTTY = 0x0800 +O_RDONLY = 0 +O_WRONLY = 1 +O_RDWR = 2 +O_NDELAY = 0x04 +O_APPEND = 0x08 +O_SYNC = 0x10 +O_DSYNC = 0x20 +O_RSYNC = 0x40 +O_NONBLOCK = 0x80 +O_LARGEFILE = 0x2000 +O_DIRECT = 0x8000 +O_CREAT = 0x100 +O_TRUNC = 0x200 +O_EXCL = 0x400 +O_NOCTTY = 0x800 +F_DUPFD = 0 +F_GETFD = 1 +F_SETFD = 2 +F_GETFL = 3 +F_SETFL = 4 +F_GETLK = 14 +F_SETLK = 6 +F_SETLKW = 7 +F_CHKFL = 8 +F_ALLOCSP = 10 +F_FREESP = 11 +F_SETBSDLK = 12 +F_SETBSDLKW = 13 +F_DIOINFO = 30 +F_FSGETXATTR = 31 +F_FSSETXATTR = 32 +F_GETLK64 = 33 +F_SETLK64 = 34 +F_SETLKW64 = 35 +F_ALLOCSP64 = 36 +F_FREESP64 = 37 +F_GETBMAP = 38 +F_FSSETDM = 39 +F_RESVSP = 40 +F_UNRESVSP = 41 +F_RESVSP64 = 42 +F_UNRESVSP64 = 43 +F_GETBMAPA = 44 +F_FSGETXATTRA = 45 +F_GETALLLK = 46 +F_RSETLK = 20 +F_RGETLK = 21 +F_RSETLKW = 22 +F_GETOWN = 23 +F_SETOWN = 24 +F_RDLCK = 01 +F_WRLCK = 02 +F_UNLCK = 03 +O_ACCMODE = 3 +FD_CLOEXEC = 1 +FD_NODUP_FORK = 4 +FMASK = 0x90FF +FOPEN = 0xFFFFFFFF +FREAD = 0x01 +FWRITE = 0x02 +FNDELAY = 0x04 +FAPPEND = 0x08 +FSYNC = 0x10 +FDSYNC = 0x20 +FRSYNC = 0x40 +FNONBLOCK = 0x80 +FASYNC = 0x1000 +FNONBLK = FNONBLOCK +FLARGEFILE = 0x2000 +FDIRECT = 0x8000 +FCREAT = 0x0100 +FTRUNC = 0x0200 +FEXCL = 0x0400 +FNOCTTY = 0x0800 +FMARK = 0x4000 +FDEFER = 0x2000 +FINPROGRESS = 0x0400 +FINVIS = 0x0100 +FNMFS = 0x2000 +FDIRENT64 = 0x8000 +FCLOSEXEC = 001 +FDSHD = 0x0001 +FDNOMARK = 0x0002 +FDIGNPROGRESS = 0x0004 +LOCK_SH = 1 +LOCK_EX = 2 +LOCK_NB = 4 +LOCK_UN = 8 +F_OK = 0 +X_OK = 1 +W_OK = 2 +R_OK = 4 +L_SET = 0 +L_INCR = 1 +L_XTND = 2 diff --git a/Lib/plat-irix6/FL.py b/Lib/plat-irix6/FL.py new file mode 100644 index 0000000..f85237b --- /dev/null +++ b/Lib/plat-irix6/FL.py @@ -0,0 +1,289 @@ +# Constants used by the FORMS library (module fl). +# This corresponds to "forms.h". +# Recommended use: import FL; ... FL.NORMAL_BOX ... etc. +# Alternate use: from FL import *; ... NORMAL_BOX ... etc. + +_v20 = 1 +_v21 = 1 +##import fl +##try: +## _v20 = (fl.get_rgbmode <> None) +##except: +## _v20 = 0 +##del fl + +NULL = 0 +FALSE = 0 +TRUE = 1 + +EVENT = -1 + +LABEL_SIZE = 64 +if _v20: + SHORTCUT_SIZE = 32 +PLACE_FREE = 0 +PLACE_SIZE = 1 +PLACE_ASPECT = 2 +PLACE_MOUSE = 3 +PLACE_CENTER = 4 +PLACE_POSITION = 5 +FL_PLACE_FULLSCREEN = 6 +FIND_INPUT = 0 +FIND_AUTOMATIC = 1 +FIND_MOUSE = 2 +BEGIN_GROUP = 10000 +END_GROUP = 20000 +ALIGN_TOP = 0 +ALIGN_BOTTOM = 1 +ALIGN_LEFT = 2 +ALIGN_RIGHT = 3 +ALIGN_CENTER = 4 +NO_BOX = 0 +UP_BOX = 1 +DOWN_BOX = 2 +FLAT_BOX = 3 +BORDER_BOX = 4 +SHADOW_BOX = 5 +FRAME_BOX = 6 +ROUNDED_BOX = 7 +RFLAT_BOX = 8 +RSHADOW_BOX = 9 +TOP_BOUND_COL = 51 +LEFT_BOUND_COL = 55 +BOT_BOUND_COL = 40 +RIGHT_BOUND_COL = 35 +COL1 = 47 +MCOL = 49 +LCOL = 0 +BOUND_WIDTH = 3.0 +DRAW = 0 +PUSH = 1 +RELEASE = 2 +ENTER = 3 +LEAVE = 4 +MOUSE = 5 +FOCUS = 6 +UNFOCUS = 7 +KEYBOARD = 8 +STEP = 9 +MOVE = 10 +FONT_NAME = 'Helvetica' +FONT_BOLDNAME = 'Helvetica-Bold' +FONT_ITALICNAME = 'Helvetica-Oblique' +FONT_FIXEDNAME = 'Courier' +FONT_ICONNAME = 'Icon' +SMALL_FONT = 8.0 +NORMAL_FONT = 11.0 +LARGE_FONT = 20.0 +NORMAL_STYLE = 0 +BOLD_STYLE = 1 +ITALIC_STYLE = 2 +FIXED_STYLE = 3 +ENGRAVED_STYLE = 4 +ICON_STYLE = 5 +BITMAP = 3 +NORMAL_BITMAP = 0 +BITMAP_BOXTYPE = NO_BOX +BITMAP_COL1 = 0 +BITMAP_COL2 = COL1 +BITMAP_LCOL = LCOL +BITMAP_ALIGN = ALIGN_BOTTOM +BITMAP_MAXSIZE = 128*128 +BITMAP_BW = BOUND_WIDTH +BOX = 1 +BOX_BOXTYPE = UP_BOX +BOX_COL1 = COL1 +BOX_LCOL = LCOL +BOX_ALIGN = ALIGN_CENTER +BOX_BW = BOUND_WIDTH +BROWSER = 71 +NORMAL_BROWSER = 0 +SELECT_BROWSER = 1 +HOLD_BROWSER = 2 +MULTI_BROWSER = 3 +BROWSER_BOXTYPE = DOWN_BOX +BROWSER_COL1 = COL1 +BROWSER_COL2 = 3 +BROWSER_LCOL = LCOL +BROWSER_ALIGN = ALIGN_BOTTOM +BROWSER_SLCOL = COL1 +BROWSER_BW = BOUND_WIDTH +BROWSER_LINELENGTH = 128 +BROWSER_MAXLINE = 512 +BUTTON = 11 +NORMAL_BUTTON = 0 +PUSH_BUTTON = 1 +RADIO_BUTTON = 2 +HIDDEN_BUTTON = 3 +TOUCH_BUTTON = 4 +INOUT_BUTTON = 5 +RETURN_BUTTON = 6 +if _v20: + HIDDEN_RET_BUTTON = 7 +BUTTON_BOXTYPE = UP_BOX +BUTTON_COL1 = COL1 +BUTTON_COL2 = COL1 +BUTTON_LCOL = LCOL +BUTTON_ALIGN = ALIGN_CENTER +BUTTON_MCOL1 = MCOL +BUTTON_MCOL2 = MCOL +BUTTON_BW = BOUND_WIDTH +if _v20: + CHART = 4 + BAR_CHART = 0 + HORBAR_CHART = 1 + LINE_CHART = 2 + FILLED_CHART = 3 + SPIKE_CHART = 4 + PIE_CHART = 5 + SPECIALPIE_CHART = 6 + CHART_BOXTYPE = BORDER_BOX + CHART_COL1 = COL1 + CHART_LCOL = LCOL + CHART_ALIGN = ALIGN_BOTTOM + CHART_BW = BOUND_WIDTH + CHART_MAX = 128 +CHOICE = 42 +NORMAL_CHOICE = 0 +CHOICE_BOXTYPE = DOWN_BOX +CHOICE_COL1 = COL1 +CHOICE_COL2 = LCOL +CHOICE_LCOL = LCOL +CHOICE_ALIGN = ALIGN_LEFT +CHOICE_BW = BOUND_WIDTH +CHOICE_MCOL = MCOL +CHOICE_MAXITEMS = 128 +CHOICE_MAXSTR = 64 +CLOCK = 61 +SQUARE_CLOCK = 0 +ROUND_CLOCK = 1 +CLOCK_BOXTYPE = UP_BOX +CLOCK_COL1 = 37 +CLOCK_COL2 = 42 +CLOCK_LCOL = LCOL +CLOCK_ALIGN = ALIGN_BOTTOM +CLOCK_TOPCOL = COL1 +CLOCK_BW = BOUND_WIDTH +COUNTER = 25 +NORMAL_COUNTER = 0 +SIMPLE_COUNTER = 1 +COUNTER_BOXTYPE = UP_BOX +COUNTER_COL1 = COL1 +COUNTER_COL2 = 4 +COUNTER_LCOL = LCOL +COUNTER_ALIGN = ALIGN_BOTTOM +if _v20: + COUNTER_BW = BOUND_WIDTH +else: + DEFAULT = 51 + RETURN_DEFAULT = 0 + ALWAYS_DEFAULT = 1 +DIAL = 22 +NORMAL_DIAL = 0 +LINE_DIAL = 1 +DIAL_BOXTYPE = NO_BOX +DIAL_COL1 = COL1 +DIAL_COL2 = 37 +DIAL_LCOL = LCOL +DIAL_ALIGN = ALIGN_BOTTOM +DIAL_TOPCOL = COL1 +DIAL_BW = BOUND_WIDTH +FREE = 101 +NORMAL_FREE = 1 +SLEEPING_FREE = 2 +INPUT_FREE = 3 +CONTINUOUS_FREE = 4 +ALL_FREE = 5 +INPUT = 31 +NORMAL_INPUT = 0 +if _v20: + FLOAT_INPUT = 1 + INT_INPUT = 2 + HIDDEN_INPUT = 3 + if _v21: + MULTILINE_INPUT = 4 + SECRET_INPUT = 5 +else: + ALWAYS_INPUT = 1 +INPUT_BOXTYPE = DOWN_BOX +INPUT_COL1 = 13 +INPUT_COL2 = 5 +INPUT_LCOL = LCOL +INPUT_ALIGN = ALIGN_LEFT +INPUT_TCOL = LCOL +INPUT_CCOL = 4 +INPUT_BW = BOUND_WIDTH +INPUT_MAX = 128 +LIGHTBUTTON = 12 +LIGHTBUTTON_BOXTYPE = UP_BOX +LIGHTBUTTON_COL1 = 39 +LIGHTBUTTON_COL2 = 3 +LIGHTBUTTON_LCOL = LCOL +LIGHTBUTTON_ALIGN = ALIGN_CENTER +LIGHTBUTTON_TOPCOL = COL1 +LIGHTBUTTON_MCOL = MCOL +LIGHTBUTTON_BW1 = BOUND_WIDTH +LIGHTBUTTON_BW2 = BOUND_WIDTH/2.0 +LIGHTBUTTON_MINSIZE = 12.0 +MENU = 41 +TOUCH_MENU = 0 +PUSH_MENU = 1 +MENU_BOXTYPE = BORDER_BOX +MENU_COL1 = 55 +MENU_COL2 = 37 +MENU_LCOL = LCOL +MENU_ALIGN = ALIGN_CENTER +MENU_BW = BOUND_WIDTH +MENU_MAX = 300 +POSITIONER = 23 +NORMAL_POSITIONER = 0 +POSITIONER_BOXTYPE = DOWN_BOX +POSITIONER_COL1 = COL1 +POSITIONER_COL2 = 1 +POSITIONER_LCOL = LCOL +POSITIONER_ALIGN = ALIGN_BOTTOM +POSITIONER_BW = BOUND_WIDTH +ROUNDBUTTON = 13 +ROUNDBUTTON_BOXTYPE = NO_BOX +ROUNDBUTTON_COL1 = 7 +ROUNDBUTTON_COL2 = 3 +ROUNDBUTTON_LCOL = LCOL +ROUNDBUTTON_ALIGN = ALIGN_CENTER +ROUNDBUTTON_TOPCOL = COL1 +ROUNDBUTTON_MCOL = MCOL +ROUNDBUTTON_BW = BOUND_WIDTH +SLIDER = 21 +VALSLIDER = 24 +VERT_SLIDER = 0 +HOR_SLIDER = 1 +VERT_FILL_SLIDER = 2 +HOR_FILL_SLIDER = 3 +VERT_NICE_SLIDER = 4 +HOR_NICE_SLIDER = 5 +SLIDER_BOXTYPE = DOWN_BOX +SLIDER_COL1 = COL1 +SLIDER_COL2 = COL1 +SLIDER_LCOL = LCOL +SLIDER_ALIGN = ALIGN_BOTTOM +SLIDER_BW1 = BOUND_WIDTH +SLIDER_BW2 = BOUND_WIDTH*0.75 +SLIDER_FINE = 0.05 +SLIDER_WIDTH = 0.08 +TEXT = 2 +NORMAL_TEXT = 0 +TEXT_BOXTYPE = NO_BOX +TEXT_COL1 = COL1 +TEXT_LCOL = LCOL +TEXT_ALIGN = ALIGN_LEFT +TEXT_BW = BOUND_WIDTH +TIMER = 62 +NORMAL_TIMER = 0 +VALUE_TIMER = 1 +HIDDEN_TIMER = 2 +TIMER_BOXTYPE = DOWN_BOX +TIMER_COL1 = COL1 +TIMER_COL2 = 1 +TIMER_LCOL = LCOL +TIMER_ALIGN = ALIGN_CENTER +TIMER_BW = BOUND_WIDTH +TIMER_BLINKRATE = 0.2 diff --git a/Lib/plat-irix6/GET.py b/Lib/plat-irix6/GET.py new file mode 100644 index 0000000..9c3d7d6 --- /dev/null +++ b/Lib/plat-irix6/GET.py @@ -0,0 +1,59 @@ +# Symbols from <gl/get.h> + +BCKBUFFER = 0x1 +FRNTBUFFER = 0x2 +DRAWZBUFFER = 0x4 +DMRGB = 0 +DMSINGLE = 1 +DMDOUBLE = 2 +DMRGBDOUBLE = 5 +HZ30 = 0 +HZ60 = 1 +NTSC = 2 +HDTV = 3 +VGA = 4 +IRIS3K = 5 +PR60 = 6 +PAL = 9 +HZ30_SG = 11 +A343 = 14 +STR_RECT = 15 +VOF0 = 16 +VOF1 = 17 +VOF2 = 18 +VOF3 = 19 +SGI0 = 20 +SGI1 = 21 +SGI2 = 22 +HZ72 = 23 +GL_VIDEO_REG = 0x00800000 +GLV_GENLOCK = 0x00000001 +GLV_UNBLANK = 0x00000002 +GLV_SRED = 0x00000004 +GLV_SGREEN = 0x00000008 +GLV_SBLUE = 0x00000010 +GLV_SALPHA = 0x00000020 +GLV_TTLGENLOCK = 0x00000080 +GLV_TTLSYNC = GLV_TTLGENLOCK +GLV_GREENGENLOCK = 0x0000100 +LEFTPLANE = 0x0001 +RIGHTPLANE = 0x0002 +BOTTOMPLANE = 0x0004 +TOPPLANE = 0x0008 +NEARPLANE = 0x0010 +FARPLANE = 0x0020 +## GETDEF = __GL_GET_H__ +NOBUFFER = 0x0 +BOTHBUFFERS = 0x3 +DMINTENSITYSINGLE = 3 +DMINTENSITYDOUBLE = 4 +MONSPECIAL = 0x20 +HZ50 = 3 +MONA = 5 +MONB = 6 +MONC = 7 +MOND = 8 +MON_ALL = 12 +MON_GEN_ALL = 13 +CMAPMULTI = 0 +CMAPONE = 1 diff --git a/Lib/plat-irix6/GL.py b/Lib/plat-irix6/GL.py new file mode 100644 index 0000000..9f02f65 --- /dev/null +++ b/Lib/plat-irix6/GL.py @@ -0,0 +1,393 @@ +NULL = 0 +FALSE = 0 +TRUE = 1 +ATTRIBSTACKDEPTH = 10 +VPSTACKDEPTH = 8 +MATRIXSTACKDEPTH = 32 +NAMESTACKDEPTH = 1025 +STARTTAG = -2 +ENDTAG = -3 +BLACK = 0 +RED = 1 +GREEN = 2 +YELLOW = 3 +BLUE = 4 +MAGENTA = 5 +CYAN = 6 +WHITE = 7 +PUP_CLEAR = 0 +PUP_COLOR = 1 +PUP_BLACK = 2 +PUP_WHITE = 3 +NORMALDRAW = 0x010 +PUPDRAW = 0x020 +OVERDRAW = 0x040 +UNDERDRAW = 0x080 +CURSORDRAW = 0x100 +DUALDRAW = 0x200 +PATTERN_16 = 16 +PATTERN_32 = 32 +PATTERN_64 = 64 +PATTERN_16_SIZE = 16 +PATTERN_32_SIZE = 64 +PATTERN_64_SIZE = 256 +SRC_AUTO = 0 +SRC_FRONT = 1 +SRC_BACK = 2 +SRC_ZBUFFER = 3 +SRC_PUP = 4 +SRC_OVER = 5 +SRC_UNDER = 6 +SRC_FRAMEGRABBER = 7 +BF_ZERO = 0 +BF_ONE = 1 +BF_DC = 2 +BF_SC = 2 +BF_MDC = 3 +BF_MSC = 3 +BF_SA = 4 +BF_MSA = 5 +BF_DA = 6 +BF_MDA = 7 +BF_MIN_SA_MDA = 8 +AF_NEVER = 0 +AF_LESS = 1 +AF_EQUAL = 2 +AF_LEQUAL = 3 +AF_GREATER = 4 +AF_NOTEQUAL = 5 +AF_GEQUAL = 6 +AF_ALWAYS = 7 +ZF_NEVER = 0 +ZF_LESS = 1 +ZF_EQUAL = 2 +ZF_LEQUAL = 3 +ZF_GREATER = 4 +ZF_NOTEQUAL = 5 +ZF_GEQUAL = 6 +ZF_ALWAYS = 7 +ZSRC_DEPTH = 0 +ZSRC_COLOR = 1 +SMP_OFF = 0x0 +SMP_ON = 0x1 +SMP_SMOOTHER = 0x2 +SML_OFF = 0x0 +SML_ON = 0x1 +SML_SMOOTHER = 0x2 +SML_END_CORRECT = 0x4 +PYSM_OFF = 0 +PYSM_ON = 1 +PYSM_SHRINK = 2 +DT_OFF = 0 +DT_ON = 1 +PUP_NONE = 0 +PUP_GREY = 0x1 +PUP_BOX = 0x2 +PUP_CHECK = 0x4 +GLC_OLDPOLYGON = 0 +GLC_ZRANGEMAP = 1 +GLC_MQUEUERATE = 2 +GLC_SOFTATTACH = 3 +GLC_MANAGEBG = 4 +GLC_SLOWMAPCOLORS = 5 +GLC_INPUTCHANGEBUG = 6 +GLC_NOBORDERBUG = 7 +GLC_SET_VSYNC = 8 +GLC_GET_VSYNC = 9 +GLC_VSYNC_SLEEP = 10 +GLC_COMPATRATE = 15 +C16X1 = 0 +C16X2 = 1 +C32X1 = 2 +C32X2 = 3 +CCROSS = 4 +FLAT = 0 +GOURAUD = 1 +LO_ZERO = 0x0 +LO_AND = 0x1 +LO_ANDR = 0x2 +LO_SRC = 0x3 +LO_ANDI = 0x4 +LO_DST = 0x5 +LO_XOR = 0x6 +LO_OR = 0x7 +LO_NOR = 0x8 +LO_XNOR = 0x9 +LO_NDST = 0xa +LO_ORR = 0xb +LO_NSRC = 0xc +LO_ORI = 0xd +LO_NAND = 0xe +LO_ONE = 0xf +INFOCUSSCRN = -2 +ST_KEEP = 0 +ST_ZERO = 1 +ST_REPLACE = 2 +ST_INCR = 3 +ST_DECR = 4 +ST_INVERT = 5 +SF_NEVER = 0 +SF_LESS = 1 +SF_EQUAL = 2 +SF_LEQUAL = 3 +SF_GREATER = 4 +SF_NOTEQUAL = 5 +SF_GEQUAL = 6 +SF_ALWAYS = 7 +SS_OFF = 0 +SS_DEPTH = 1 +PYM_FILL = 1 +PYM_POINT = 2 +PYM_LINE = 3 +PYM_HOLLOW = 4 +PYM_LINE_FAST = 5 +FG_OFF = 0 +FG_ON = 1 +FG_DEFINE = 2 +FG_VTX_EXP = 2 +FG_VTX_LIN = 3 +FG_PIX_EXP = 4 +FG_PIX_LIN = 5 +FG_VTX_EXP2 = 6 +FG_PIX_EXP2 = 7 +PM_SHIFT = 0 +PM_EXPAND = 1 +PM_C0 = 2 +PM_C1 = 3 +PM_ADD24 = 4 +PM_SIZE = 5 +PM_OFFSET = 6 +PM_STRIDE = 7 +PM_TTOB = 8 +PM_RTOL = 9 +PM_ZDATA = 10 +PM_WARP = 11 +PM_RDX = 12 +PM_RDY = 13 +PM_CDX = 14 +PM_CDY = 15 +PM_XSTART = 16 +PM_YSTART = 17 +PM_VO1 = 1000 +NAUTO = 0 +NNORMALIZE = 1 +AC_CLEAR = 0 +AC_ACCUMULATE = 1 +AC_CLEAR_ACCUMULATE = 2 +AC_RETURN = 3 +AC_MULT = 4 +AC_ADD = 5 +CP_OFF = 0 +CP_ON = 1 +CP_DEFINE = 2 +SB_RESET = 0 +SB_TRACK = 1 +SB_HOLD = 2 +RD_FREEZE = 0x00000001 +RD_ALPHAONE = 0x00000002 +RD_IGNORE_UNDERLAY = 0x00000004 +RD_IGNORE_OVERLAY = 0x00000008 +RD_IGNORE_PUP = 0x00000010 +RD_OFFSCREEN = 0x00000020 +GD_XPMAX = 0 +GD_YPMAX = 1 +GD_XMMAX = 2 +GD_YMMAX = 3 +GD_ZMIN = 4 +GD_ZMAX = 5 +GD_BITS_NORM_SNG_RED = 6 +GD_BITS_NORM_SNG_GREEN = 7 +GD_BITS_NORM_SNG_BLUE = 8 +GD_BITS_NORM_DBL_RED = 9 +GD_BITS_NORM_DBL_GREEN = 10 +GD_BITS_NORM_DBL_BLUE = 11 +GD_BITS_NORM_SNG_CMODE = 12 +GD_BITS_NORM_DBL_CMODE = 13 +GD_BITS_NORM_SNG_MMAP = 14 +GD_BITS_NORM_DBL_MMAP = 15 +GD_BITS_NORM_ZBUFFER = 16 +GD_BITS_OVER_SNG_CMODE = 17 +GD_BITS_UNDR_SNG_CMODE = 18 +GD_BITS_PUP_SNG_CMODE = 19 +GD_BITS_NORM_SNG_ALPHA = 21 +GD_BITS_NORM_DBL_ALPHA = 22 +GD_BITS_CURSOR = 23 +GD_OVERUNDER_SHARED = 24 +GD_BLEND = 25 +GD_CIFRACT = 26 +GD_CROSSHAIR_CINDEX = 27 +GD_DITHER = 28 +GD_LINESMOOTH_CMODE = 30 +GD_LINESMOOTH_RGB = 31 +GD_LOGICOP = 33 +GD_NSCRNS = 35 +GD_NURBS_ORDER = 36 +GD_NBLINKS = 37 +GD_NVERTEX_POLY = 39 +GD_PATSIZE_64 = 40 +GD_PNTSMOOTH_CMODE = 41 +GD_PNTSMOOTH_RGB = 42 +GD_PUP_TO_OVERUNDER = 43 +GD_READSOURCE = 44 +GD_READSOURCE_ZBUFFER = 48 +GD_STEREO = 50 +GD_SUBPIXEL_LINE = 51 +GD_SUBPIXEL_PNT = 52 +GD_SUBPIXEL_POLY = 53 +GD_TRIMCURVE_ORDER = 54 +GD_WSYS = 55 +GD_ZDRAW_GEOM = 57 +GD_ZDRAW_PIXELS = 58 +GD_SCRNTYPE = 61 +GD_TEXTPORT = 62 +GD_NMMAPS = 63 +GD_FRAMEGRABBER = 64 +GD_TIMERHZ = 66 +GD_DBBOX = 67 +GD_AFUNCTION = 68 +GD_ALPHA_OVERUNDER = 69 +GD_BITS_ACBUF = 70 +GD_BITS_ACBUF_HW = 71 +GD_BITS_STENCIL = 72 +GD_CLIPPLANES = 73 +GD_FOGVERTEX = 74 +GD_LIGHTING_TWOSIDE = 76 +GD_POLYMODE = 77 +GD_POLYSMOOTH = 78 +GD_SCRBOX = 79 +GD_TEXTURE = 80 +GD_FOGPIXEL = 81 +GD_TEXTURE_PERSP = 82 +GD_MUXPIPES = 83 +GD_NOLIMIT = -2 +GD_WSYS_NONE = 0 +GD_WSYS_4S = 1 +GD_SCRNTYPE_WM = 0 +GD_SCRNTYPE_NOWM = 1 +N_PIXEL_TOLERANCE = 1 +N_CULLING = 2 +N_DISPLAY = 3 +N_ERRORCHECKING = 4 +N_SUBDIVISIONS = 5 +N_S_STEPS = 6 +N_T_STEPS = 7 +N_TILES = 8 +N_TMP1 = 9 +N_TMP2 = 10 +N_TMP3 = 11 +N_TMP4 = 12 +N_TMP5 = 13 +N_TMP6 = 14 +N_FILL = 1.0 +N_OUTLINE_POLY = 2.0 +N_OUTLINE_PATCH = 5.0 +N_ISOLINE_S = 12.0 +N_ST = 0x8 +N_STW = 0xd +N_XYZ = 0x4c +N_XYZW = 0x51 +N_TEX = 0x88 +N_TEXW = 0x8d +N_RGBA = 0xd0 +N_RGBAW = 0xd5 +N_P2D = 0x8 +N_P2DR = 0xd +N_V3D = 0x4c +N_V3DR = 0x51 +N_T2D = 0x88 +N_T2DR = 0x8d +N_C4D = 0xd0 +N_C4DR = 0xd5 +LMNULL = 0.0 +MSINGLE = 0 +MPROJECTION = 1 +MVIEWING = 2 +MTEXTURE = 3 +MAXLIGHTS = 8 +MAXRESTRICTIONS = 4 +DEFMATERIAL = 0 +EMISSION = 1 +AMBIENT = 2 +DIFFUSE = 3 +SPECULAR = 4 +SHININESS = 5 +COLORINDEXES = 6 +ALPHA = 7 +DEFLIGHT = 100 +LCOLOR = 101 +POSITION = 102 +SPOTDIRECTION = 103 +SPOTLIGHT = 104 +DEFLMODEL = 200 +LOCALVIEWER = 201 +ATTENUATION = 202 +ATTENUATION2 = 203 +TWOSIDE = 204 +MATERIAL = 1000 +BACKMATERIAL = 1001 +LIGHT0 = 1100 +LIGHT1 = 1101 +LIGHT2 = 1102 +LIGHT3 = 1103 +LIGHT4 = 1104 +LIGHT5 = 1105 +LIGHT6 = 1106 +LIGHT7 = 1107 +LMODEL = 1200 +LMC_COLOR = 0 +LMC_EMISSION = 1 +LMC_AMBIENT = 2 +LMC_DIFFUSE = 3 +LMC_SPECULAR = 4 +LMC_AD = 5 +LMC_NULL = 6 +TX_MINFILTER = 0x100 +TX_MAGFILTER = 0x200 +TX_WRAP = 0x300 +TX_WRAP_S = 0x310 +TX_WRAP_T = 0x320 +TX_TILE = 0x400 +TX_BORDER = 0x500 +TX_NULL = 0x000 +TX_POINT = 0x110 +TX_BILINEAR = 0x220 +TX_MIPMAP = 0x120 +TX_MIPMAP_POINT = 0x121 +TX_MIPMAP_LINEAR = 0x122 +TX_MIPMAP_BILINEAR = 0x123 +TX_MIPMAP_TRILINEAR = 0x124 +TX_REPEAT = 0x301 +TX_CLAMP = 0x302 +TX_SELECT = 0x303 +TX_TEXTURE_0 = 0 +TV_MODULATE = 0x101 +TV_BLEND = 0x102 +TV_DECAL = 0x103 +TV_COLOR = 0x200 +TV_NULL = 0x000 +TV_ENV0 = 0 +TX_S = 0 +TX_T = 1 +TG_OFF = 0 +TG_ON = 1 +TG_CONTOUR = 2 +TG_LINEAR = 3 +TG_SPHEREMAP = 4 +TG_REFRACTMAP = 5 +DGLSINK = 0 +DGLLOCAL = 1 +DGLTSOCKET = 2 +DGL4DDN = 3 +PUP_CURSOR = PUP_COLOR +FATAL = 1 +WARNING = 2 +ASK_CONT = 3 +ASK_RESTART = 4 +XMAXSCREEN = 1279 +YMAXSCREEN = 1023 +XMAXMEDIUM = 1023 +YMAXMEDIUM = 767 +XMAX170 = 645 +YMAX170 = 484 +XMAXPAL = 779 +YMAXPAL = 574 diff --git a/Lib/plat-irix6/GLWS.py b/Lib/plat-irix6/GLWS.py new file mode 100644 index 0000000..69dab71 --- /dev/null +++ b/Lib/plat-irix6/GLWS.py @@ -0,0 +1,12 @@ +NOERROR = 0 +NOCONTEXT = -1 +NODISPLAY = -2 +NOWINDOW = -3 +NOGRAPHICS = -4 +NOTTOP = -5 +NOVISUAL = -6 +BUFSIZE = -7 +BADWINDOW = -8 +ALREADYBOUND = -100 +BINDFAILED = -101 +SETFAILED = -102 diff --git a/Lib/plat-irix6/IN.py b/Lib/plat-irix6/IN.py new file mode 100644 index 0000000..7340878 --- /dev/null +++ b/Lib/plat-irix6/IN.py @@ -0,0 +1,133 @@ +# Generated by h2py from /usr/include/netinet/in.h + +# Included from sgidefs.h +_MIPS_ISA_MIPS1 = 1 +_MIPS_ISA_MIPS2 = 2 +_MIPS_ISA_MIPS3 = 3 +_MIPS_ISA_MIPS4 = 4 +_MIPS_SIM_ABI32 = 1 +_MIPS_SIM_NABI32 = 2 +_MIPS_SIM_ABI64 = 3 + +# Included from sys/endian.h +LITTLE_ENDIAN = 1234 +BIG_ENDIAN = 4321 +PDP_ENDIAN = 3412 +BYTE_ORDER = BIG_ENDIAN +BYTE_ORDER = LITTLE_ENDIAN +def ntohl(x): return (x) + +def ntohs(x): return (x) + +def htonl(x): return (x) + +def htons(x): return (x) + +def htonl(x): return ntohl(x) + +def htons(x): return ntohs(x) + + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h + +# Included from standards.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 +IPPROTO_IP = 0 +IPPROTO_ICMP = 1 +IPPROTO_IGMP = 2 +IPPROTO_GGP = 3 +IPPROTO_IPIP = 4 +IPPROTO_ENCAP = IPPROTO_IPIP +IPPROTO_ST = 5 +IPPROTO_TCP = 6 +IPPROTO_EGP = 8 +IPPROTO_PUP = 12 +IPPROTO_UDP = 17 +IPPROTO_IDP = 22 +IPPROTO_TP = 29 +IPPROTO_XTP = 36 +IPPROTO_RSVP = 46 +IPPROTO_HELLO = 63 +IPPROTO_ND = 77 +IPPROTO_EON = 80 +IPPROTO_OSPF = 89 +IPPROTO_SWIPE = 94 +IPPROTO_RAW = 255 +IPPROTO_MAX = 256 +IPPORT_RESERVED = 1024 +IPPORT_MAXPORT = 65535 +def IN_CLASSA(i): return (((__int32_t)(i) & 0x80000000) == 0) + +IN_CLASSA_NET = 0xff000000 +IN_CLASSA_NSHIFT = 24 +IN_CLASSA_HOST = 0x00ffffff +IN_CLASSA_MAX = 128 +def IN_CLASSB(i): return (((__int32_t)(i) & 0xc0000000) == 0x80000000) + +IN_CLASSB_NET = 0xffff0000 +IN_CLASSB_NSHIFT = 16 +IN_CLASSB_HOST = 0x0000ffff +IN_CLASSB_MAX = 65536 +def IN_CLASSC(i): return (((__int32_t)(i) & 0xe0000000) == 0xc0000000) + +IN_CLASSC_NET = 0xffffff00 +IN_CLASSC_NSHIFT = 8 +IN_CLASSC_HOST = 0x000000ff +def IN_CLASSD(i): return (((__int32_t)(i) & 0xf0000000) == 0xe0000000) + +IN_CLASSD_NET = 0xf0000000 +IN_CLASSD_NSHIFT = 28 +IN_CLASSD_HOST = 0x0fffffff +def IN_MULTICAST(i): return IN_CLASSD(i) + +def IN_EXPERIMENTAL(i): return (((__int32_t)(i) & 0xf0000000) == 0xf0000000) + +def IN_BADCLASS(i): return (((__int32_t)(i) & 0xf0000000) == 0xf0000000) + +INADDR_NONE = 0xffffffff +IN_LOOPBACKNET = 127 +IP_OPTIONS = 1 +IP_HDRINCL = 2 +IP_TOS = 3 +IP_TTL = 4 +IP_RECVOPTS = 5 +IP_RECVRETOPTS = 6 +IP_RECVDSTADDR = 7 +IP_RETOPTS = 8 +IP_MULTICAST_IF = 20 +IP_MULTICAST_TTL = 21 +IP_MULTICAST_LOOP = 22 +IP_ADD_MEMBERSHIP = 23 +IP_DROP_MEMBERSHIP = 24 +IP_MULTICAST_VIF = 25 +IP_RSVP_VIF_ON = 26 +IP_RSVP_VIF_OFF = 27 +IP_RSVP_ON = 28 +IP_SENDSRCADDR = 36 +IP_DEFAULT_MULTICAST_TTL = 1 +IP_DEFAULT_MULTICAST_LOOP = 1 +IP_MAX_MEMBERSHIPS = 20 diff --git a/Lib/plat-irix6/IOCTL.py b/Lib/plat-irix6/IOCTL.py new file mode 100644 index 0000000..cec3c3f --- /dev/null +++ b/Lib/plat-irix6/IOCTL.py @@ -0,0 +1,233 @@ +# These lines were mostly generated by h2py.py (see demo/scripts) +# from <sys/ioctl.h>, <sys/termio.h> and <termios.h> on Irix 4.0.2 +# with some manual changes to cope with imperfections in h2py.py. +# The applicability on other systems is not clear; especially non-SYSV +# systems may have a totally different set of ioctls. + +IOCTYPE = 0xff00 +LIOC = (ord('l')<<8) +LIOCGETP = (LIOC|1) +LIOCSETP = (LIOC|2) +LIOCGETS = (LIOC|5) +LIOCSETS = (LIOC|6) +DIOC = (ord('d')<<8) +DIOCGETC = (DIOC|1) +DIOCGETB = (DIOC|2) +DIOCSETE = (DIOC|3) +IOCPARM_MASK = 0x7f +IOC_VOID = 0x20000000 +IOC_OUT = 0x40000000 +IOC_IN = 0x80000000 +IOC_INOUT = (IOC_IN|IOC_OUT) +int = 'i' +short = 'h' +long = 'l' +def sizeof(t): import struct; return struct.calcsize(t) +def _IO(x,y): return (IOC_VOID|((x)<<8)|y) +def _IOR(x,y,t): return (IOC_OUT|((sizeof(t)&IOCPARM_MASK)<<16)|((x)<<8)|y) +def _IOW(x,y,t): return (IOC_IN|((sizeof(t)&IOCPARM_MASK)<<16)|((x)<<8)|y) +# this should be _IORW, but stdio got there first +def _IOWR(x,y,t): return (IOC_INOUT|((sizeof(t)&IOCPARM_MASK)<<16)|((x)<<8)|y) +FIONREAD = _IOR(ord('f'), 127, int) +FIONBIO = _IOW(ord('f'), 126, int) +FIOASYNC = _IOW(ord('f'), 125, int) +FIOSETOWN = _IOW(ord('f'), 124, int) +FIOGETOWN = _IOR(ord('f'), 123, int) +NCC = 8 +NCC_PAD = 7 +NCC_EXT = 16 +NCCS = (NCC+NCC_PAD+NCC_EXT) +VINTR = 0 +VQUIT = 1 +VERASE = 2 +VKILL = 3 +VEOF = 4 +VEOL = 5 +VEOL2 = 6 +VMIN = VEOF +VTIME = VEOL +VSWTCH = 7 +VLNEXT = (NCC+NCC_PAD+0) +VWERASE = (NCC+NCC_PAD+1) +VRPRNT = (NCC+NCC_PAD+2) +VFLUSHO = (NCC+NCC_PAD+3) +VSTOP = (NCC+NCC_PAD+4) +VSTART = (NCC+NCC_PAD+5) +CNUL = '\0' +CDEL = '\377' +CESC = '\\' +CINTR = '\177' +CQUIT = '\34' +CBRK = '\377' +def CTRL(c): return ord(c) & 0x0f +CERASE = CTRL('H') +CKILL = CTRL('U') +CEOF = CTRL('d') +CEOT = CEOF +CSTART = CTRL('q') +CSTOP = CTRL('s') +CSWTCH = CTRL('z') +CSUSP = CSWTCH +CNSWTCH = 0 +CLNEXT = CTRL('v') +CWERASE = CTRL('w') +CFLUSHO = CTRL('o') +CFLUSH = CFLUSHO +CRPRNT = CTRL('r') +CDSUSP = CTRL('y') +IGNBRK = 0000001 +BRKINT = 0000002 +IGNPAR = 0000004 +PARMRK = 0000010 +INPCK = 0000020 +ISTRIP = 0000040 +INLCR = 0000100 +IGNCR = 0000200 +ICRNL = 0000400 +IUCLC = 0001000 +IXON = 0002000 +IXANY = 0004000 +IXOFF = 0010000 +IBLKMD = 0020000 +OPOST = 0000001 +OLCUC = 0000002 +ONLCR = 0000004 +OCRNL = 0000010 +ONOCR = 0000020 +ONLRET = 0000040 +OFILL = 0000100 +OFDEL = 0000200 +NLDLY = 0000400 +NL0 = 0 +NL1 = 0000400 +CRDLY = 0003000 +CR0 = 0 +CR1 = 0001000 +CR2 = 0002000 +CR3 = 0003000 +TABDLY = 0014000 +TAB0 = 0 +TAB1 = 0004000 +TAB2 = 0010000 +TAB3 = 0014000 +BSDLY = 0020000 +BS0 = 0 +BS1 = 0020000 +VTDLY = 0040000 +VT0 = 0 +VT1 = 0040000 +FFDLY = 0100000 +FF0 = 0 +FF1 = 0100000 +CBAUD = 0000017 +B0 = 0 +B50 = 0000001 +B75 = 0000002 +B110 = 0000003 +B134 = 0000004 +B150 = 0000005 +B200 = 0000006 +B300 = 0000007 +B600 = 0000010 +B1200 = 0000011 +B1800 = 0000012 +B2400 = 0000013 +B4800 = 0000014 +B9600 = 0000015 +B19200 = 0000016 +EXTA = 0000016 +B38400 = 0000017 +EXTB = 0000017 +CSIZE = 0000060 +CS5 = 0 +CS6 = 0000020 +CS7 = 0000040 +CS8 = 0000060 +CSTOPB = 0000100 +CREAD = 0000200 +PARENB = 0000400 +PARODD = 0001000 +HUPCL = 0002000 +CLOCAL = 0004000 +LOBLK = 0040000 +ISIG = 0000001 +ICANON = 0000002 +XCASE = 0000004 +ECHO = 0000010 +ECHOE = 0000020 +ECHOK = 0000040 +ECHONL = 0000100 +NOFLSH = 0000200 +IIEXTEN = 0000400 +ITOSTOP = 0001000 +SSPEED = B9600 +IOCTYPE = 0xff00 +TIOC = (ord('T')<<8) +oTCGETA = (TIOC|1) +oTCSETA = (TIOC|2) +oTCSETAW = (TIOC|3) +oTCSETAF = (TIOC|4) +TCSBRK = (TIOC|5) +TCXONC = (TIOC|6) +TCFLSH = (TIOC|7) +TCGETA = (TIOC|8) +TCSETA = (TIOC|9) +TCSETAW = (TIOC|10) +TCSETAF = (TIOC|11) +TIOCFLUSH = (TIOC|12) +TCDSET = (TIOC|32) +TCBLKMD = (TIOC|33) +TIOCPKT = (TIOC|112) +TIOCPKT_DATA = 0x00 +TIOCPKT_FLUSHREAD = 0x01 +TIOCPKT_FLUSHWRITE = 0x02 +TIOCPKT_NOSTOP = 0x10 +TIOCPKT_DOSTOP = 0x20 +TIOCNOTTY = (TIOC|113) +TIOCSTI = (TIOC|114) +TIOCSPGRP = _IOW(ord('t'), 118, int) +TIOCGPGRP = _IOR(ord('t'), 119, int) +TIOCCONS = _IOW(ord('t'), 120, int) +struct_winsize = 'hhhh' +TIOCGWINSZ = _IOR(ord('t'), 104, struct_winsize) +TIOCSWINSZ = _IOW(ord('t'), 103, struct_winsize) +TFIOC = (ord('F')<<8) +oFIONREAD = (TFIOC|127) +LDIOC = (ord('D')<<8) +LDOPEN = (LDIOC|0) +LDCLOSE = (LDIOC|1) +LDCHG = (LDIOC|2) +LDGETT = (LDIOC|8) +LDSETT = (LDIOC|9) +TERM_NONE = 0 +TERM_TEC = 1 +TERM_V61 = 2 +TERM_V10 = 3 +TERM_TEX = 4 +TERM_D40 = 5 +TERM_H45 = 6 +TERM_D42 = 7 +TM_NONE = 0000 +TM_SNL = 0001 +TM_ANL = 0002 +TM_LCF = 0004 +TM_CECHO = 0010 +TM_CINVIS = 0020 +TM_SET = 0200 +LDISC0 = 0 +LDISC1 = 1 +NTTYDISC = LDISC1 +VSUSP = VSWTCH +TCSANOW = 0 +TCSADRAIN = 1 +TCSAFLUSH = 2 +TCIFLUSH = 0 +TCOFLUSH = 1 +TCIOFLUSH = 2 +TCOOFF = 0 +TCOON = 1 +TCIOFF = 2 +TCION = 3 +TO_STOP = LOBLK +IEXTEN = IIEXTEN +TOSTOP = ITOSTOP diff --git a/Lib/plat-irix6/SOCKET.py b/Lib/plat-irix6/SOCKET.py new file mode 100644 index 0000000..39a8b63 --- /dev/null +++ b/Lib/plat-irix6/SOCKET.py @@ -0,0 +1,152 @@ +# Generated by h2py from /usr/include/sys/socket.h + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h + +# Included from standards.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 +NC_TPI_CLTS = 1 +NC_TPI_COTS = 2 +NC_TPI_COTS_ORD = 3 +NC_TPI_RAW = 4 +SOCK_DGRAM = NC_TPI_CLTS +SOCK_STREAM = NC_TPI_COTS +SOCK_RAW = NC_TPI_RAW +SOCK_RDM = 5 +SOCK_SEQPACKET = 6 +SO_DEBUG = 0x0001 +SO_ACCEPTCONN = 0x0002 +SO_REUSEADDR = 0x0004 +SO_KEEPALIVE = 0x0008 +SO_DONTROUTE = 0x0010 +SO_BROADCAST = 0x0020 +SO_USELOOPBACK = 0x0040 +SO_LINGER = 0x0080 +SO_OOBINLINE = 0x0100 +SO_REUSEPORT = 0x0200 +SO_ORDREL = 0x0200 +SO_IMASOCKET = 0x0400 +SO_CHAMELEON = 0x1000 +SO_PASSIFNAME = 0x2000 +SO_SNDBUF = 0x1001 +SO_RCVBUF = 0x1002 +SO_SNDLOWAT = 0x1003 +SO_RCVLOWAT = 0x1004 +SO_SNDTIMEO = 0x1005 +SO_RCVTIMEO = 0x1006 +SO_ERROR = 0x1007 +SO_TYPE = 0x1008 +SO_PROTOTYPE = 0x1009 +SOL_SOCKET = 0xffff +AF_UNSPEC = 0 +AF_LOCAL = 1 +AF_UNIX = AF_LOCAL +AF_INET = 2 +AF_IMPLINK = 3 +AF_PUP = 4 +AF_CHAOS = 5 +AF_NS = 6 +AF_ISO = 7 +AF_ECMA = 8 +AF_DATAKIT = 9 +AF_CCITT = 10 +AF_SNA = 11 +AF_DECnet = 12 +AF_DLI = 13 +AF_LAT = 14 +AF_HYLINK = 15 +AF_APPLETALK = 16 +AF_ROUTE = 17 +AF_RAW = 18 +AF_LINK = 18 +pseudo_AF_XTP = 19 +AF_NIT = 17 +AF_802 = 18 +AF_OSI = 19 +AF_X25 = 20 +AF_OSINET = 21 +AF_GOSIP = 22 +AF_SDL = 23 +AF_INET6 = 24 +AF_LINK = 25 +AF_MAX = (AF_LINK+1) +_SIN_ADDR_SIZE = 8 +_SIN_SA_DATA_SIZE = 14 +_MAX_SA_LEN = 20 +def OPTLEN(x): return ((((x) + sizeof(int) - 1) / sizeof(int)) * sizeof(int)) + +PF_UNSPEC = AF_UNSPEC +PF_LOCAL = AF_LOCAL +PF_UNIX = PF_LOCAL +PF_INET = AF_INET +PF_IMPLINK = AF_IMPLINK +PF_PUP = AF_PUP +PF_CHAOS = AF_CHAOS +PF_NS = AF_NS +PF_ISO = AF_ISO +PF_OSI = AF_ISO +PF_ECMA = AF_ECMA +PF_DATAKIT = AF_DATAKIT +PF_CCITT = AF_CCITT +PF_SNA = AF_SNA +PF_DECnet = AF_DECnet +PF_DLI = AF_DLI +PF_LAT = AF_LAT +PF_HYLINK = AF_HYLINK +PF_APPLETALK = AF_APPLETALK +PF_ROUTE = AF_ROUTE +PF_LINK = AF_LINK +PF_XTP = pseudo_AF_XTP +PF_RAW = AF_RAW +PF_NIT = AF_NIT +PF_802 = AF_802 +PF_X25 = AF_X25 +PF_OSINET = AF_OSINET +PF_GOSIP = AF_GOSIP +PF_INET6 = AF_INET6 +PF_MAX = AF_MAX +NET_RT_DUMP = 1 +NET_RT_FLAGS = 2 +NET_RT_IFLIST = 3 +IPCTL_FORWARDING = 1 +IPCTL_SENDREDIRECTS = 2 +UDPCTL_CHECKSUM = 1 +SOMAXCONN = 1000 +MSG_OOB = 0x1 +MSG_PEEK = 0x2 +MSG_DONTROUTE = 0x4 +MSG_EOR = 0x8 +MSG_TRUNC = 0x10 +MSG_CTRUNC = 0x20 +MSG_WAITALL = 0x40 +MSG_DONTWAIT = 0x80 +MSG_BTAG = 0x40 +MSG_ETAG = 0x80 +MSG_MAXIOVLEN = 16 +_ALIGNBYTES = 7 +def _ALIGN(p): return (((u_int)(p) + _ALIGNBYTES) & ~_ALIGNBYTES) + +SCM_RIGHTS = 0x01 diff --git a/Lib/plat-irix6/SV.py b/Lib/plat-irix6/SV.py new file mode 100644 index 0000000..08fb917 --- /dev/null +++ b/Lib/plat-irix6/SV.py @@ -0,0 +1,120 @@ +NTSC_XMAX = 640 +NTSC_YMAX = 480 +PAL_XMAX = 768 +PAL_YMAX = 576 +BLANKING_BUFFER_SIZE = 2 + +MAX_SOURCES = 2 + +# mode parameter for Bind calls +IN_OFF = 0 # No Video +IN_OVER = 1 # Video over graphics +IN_UNDER = 2 # Video under graphics +IN_REPLACE = 3 # Video replaces entire win + +# mode parameters for LoadMap calls. Specifies buffer, always 256 entries +INPUT_COLORMAP = 0 # tuples of 8-bit RGB +CHROMA_KEY_MAP = 1 # tuples of 8-bit RGB +COLOR_SPACE_MAP = 2 # tuples of 8-bit RGB +GAMMA_MAP = 3 # tuples of 24-bit red values + +# mode parameters for UseExclusive calls +INPUT = 0 +OUTPUT = 1 +IN_OUT = 2 + +# Format constants for the capture routines +RGB8_FRAMES = 0 # noninterleaved 8 bit 3:2:3 RBG fields +RGB32_FRAMES = 1 # 32-bit 8:8:8 RGB frames +YUV411_FRAMES = 2 # interleaved, 8:2:2 YUV format +YUV411_FRAMES_AND_BLANKING_BUFFER = 3 + +# +# sv.SetParam is passed variable length argument lists, +# consisting of <name, value> pairs. The following +# constants identify argument names. +# +_NAME_BASE = 1000 +SOURCE = (_NAME_BASE + 0) +SOURCE1 = 0 +SOURCE2 = 1 +SOURCE3 = 2 +COLOR = (_NAME_BASE + 1) +DEFAULT_COLOR = 0 +USER_COLOR = 1 +MONO = 2 +OUTPUTMODE = (_NAME_BASE + 2) +LIVE_OUTPUT = 0 +STILL24_OUT = 1 +FREEZE = (_NAME_BASE + 3) +DITHER = (_NAME_BASE + 4) +OUTPUT_FILTER = (_NAME_BASE + 5) +HUE = (_NAME_BASE + 6) +GENLOCK = (_NAME_BASE + 7) +GENLOCK_OFF = 0 +GENLOCK_ON = 1 +GENLOCK_HOUSE = 2 +BROADCAST = (_NAME_BASE + 8) +NTSC = 0 +PAL = 1 +VIDEO_MODE = (_NAME_BASE + 9) +COMP = 0 +SVIDEO = 1 +INPUT_BYPASS = (_NAME_BASE + 10) +FIELDDROP = (_NAME_BASE + 11) +SLAVE = (_NAME_BASE + 12) +APERTURE_FACTOR = (_NAME_BASE + 13) +AFACTOR_0 = 0 +AFACTOR_QTR = 1 +AFACTOR_HLF = 2 +AFACTOR_ONE = 3 +CORING = (_NAME_BASE + 14) +COR_OFF = 0 +COR_1LSB = 1 +COR_2LSB = 2 +COR_3LSB = 3 +APERTURE_BANDPASS = (_NAME_BASE + 15) +ABAND_F0 = 0 +ABAND_F1 = 1 +ABAND_F2 = 2 +ABAND_F3 = 3 +PREFILTER = (_NAME_BASE + 16) +CHROMA_TRAP = (_NAME_BASE + 17) +CK_THRESHOLD = (_NAME_BASE + 18) +PAL_SENSITIVITY = (_NAME_BASE + 19) +GAIN_CONTROL = (_NAME_BASE + 20) +GAIN_SLOW = 0 +GAIN_MEDIUM = 1 +GAIN_FAST = 2 +GAIN_FROZEN = 3 +AUTO_CKILL = (_NAME_BASE + 21) +VTR_MODE = (_NAME_BASE + 22) +VTR_INPUT = 0 +CAMERA_INPUT = 1 +LUMA_DELAY = (_NAME_BASE + 23) +VNOISE = (_NAME_BASE + 24) +VNOISE_NORMAL = 0 +VNOISE_SEARCH = 1 +VNOISE_AUTO = 2 +VNOISE_BYPASS = 3 +CHCV_PAL = (_NAME_BASE + 25) +CHCV_NTSC = (_NAME_BASE + 26) +CCIR_LEVELS = (_NAME_BASE + 27) +STD_CHROMA = (_NAME_BASE + 28) +DENC_VTBYPASS = (_NAME_BASE + 29) +FAST_TIMECONSTANT = (_NAME_BASE + 30) +GENLOCK_DELAY = (_NAME_BASE + 31) +PHASE_SYNC = (_NAME_BASE + 32) +VIDEO_OUTPUT = (_NAME_BASE + 33) +CHROMA_PHASEOUT = (_NAME_BASE + 34) +CHROMA_CENTER = (_NAME_BASE + 35) +YUV_TO_RGB_INVERT = (_NAME_BASE + 36) +SOURCE1_BROADCAST = (_NAME_BASE + 37) +SOURCE1_MODE = (_NAME_BASE + 38) +SOURCE2_BROADCAST = (_NAME_BASE + 39) +SOURCE2_MODE = (_NAME_BASE + 40) +SOURCE3_BROADCAST = (_NAME_BASE + 41) +SOURCE3_MODE = (_NAME_BASE + 42) +SIGNAL_STD = (_NAME_BASE + 43) +NOSIGNAL = 2 +SIGNAL_COLOR = (_NAME_BASE + 44) diff --git a/Lib/plat-irix6/TERMIOS.py b/Lib/plat-irix6/TERMIOS.py new file mode 100644 index 0000000..fa4a475 --- /dev/null +++ b/Lib/plat-irix6/TERMIOS.py @@ -0,0 +1,676 @@ +# Generated by h2py from /usr/include/sys/termios.h + +# Included from standards.h + +# Included from sys/ttydev.h +__NEW_INVALID_BAUD = 1800 +__OLD_B0 = 0 +__OLD_B50 = 0000001 +__OLD_B75 = 0000002 +__OLD_B110 = 0000003 +__OLD_B134 = 0000004 +__OLD_B150 = 0000005 +__OLD_B200 = 0000006 +__OLD_B300 = 0000007 +__OLD_B600 = 0000010 +__OLD_B1200 = 0000011 +__OLD_B1800 = 0000012 +__OLD_B2400 = 0000013 +__OLD_B4800 = 0000014 +__OLD_B9600 = 0000015 +__OLD_B19200 = 0000016 +__OLD_EXTA = 0000016 +__OLD_B38400 = 0000017 +__OLD_EXTB = 0000017 +__OLD_INVALID_BAUD = __OLD_B1800 +B0 = 0 +B50 = 50 +B75 = 75 +B110 = 110 +B134 = 134 +B150 = 150 +B200 = 200 +B300 = 300 +B600 = 600 +B1200 = 1200 +B1800 = 1800 +B2400 = 2400 +B4800 = 4800 +B9600 = 9600 +B19200 = 19200 +EXTA = 19200 +B38400 = 38400 +EXTB = 38400 +B57600 = 57600 +B76800 = 76800 +B115200 = 115200 +__INVALID_BAUD = 1800 +B0 = __OLD_B0 +B50 = __OLD_B50 +B75 = __OLD_B75 +B110 = __OLD_B110 +B134 = __OLD_B134 +B150 = __OLD_B150 +B200 = __OLD_B200 +B300 = __OLD_B300 +B600 = __OLD_B600 +B1200 = __OLD_B1200 +B1800 = __OLD_B1800 +B2400 = __OLD_B2400 +B4800 = __OLD_B4800 +B9600 = __OLD_B9600 +B19200 = __OLD_B19200 +EXTA = __OLD_B19200 +B38400 = __OLD_B38400 +EXTB = __OLD_B38400 +__INVALID_BAUD = __OLD_INVALID_BAUD + +# Included from sys/types.h + +# Included from sgidefs.h +_MIPS_ISA_MIPS1 = 1 +_MIPS_ISA_MIPS2 = 2 +_MIPS_ISA_MIPS3 = 3 +_MIPS_ISA_MIPS4 = 4 +_MIPS_SIM_ABI32 = 1 +_MIPS_SIM_NABI32 = 2 +_MIPS_SIM_ABI64 = 3 +P_MYID = (-1) +P_MYHOSTID = (-1) + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 +_POSIX_VDISABLE = 0 +def CTRL(c): return ((c)&037) + +IBSHIFT = 16 +NCC = 8 +NCCS = 23 +__NEW_MAX_BAUD = 500000 +VINTR = 0 +VQUIT = 1 +VERASE = 2 +VKILL = 3 +VEOF = 4 +VEOL = 5 +VEOL2 = 6 +VMIN = 4 +VTIME = 5 +VSWTCH = 7 +VSTART = 8 +VSTOP = 9 +VSUSP = 10 +VDSUSP = 11 +VREPRINT = 12 +VDISCARD = 13 +VWERASE = 14 +VLNEXT = 15 +VRPRNT = VREPRINT +VFLUSHO = VDISCARD +VCEOF = NCC +VCEOL = (NCC + 1) +CNUL = 0 +CDEL = 0377 +CESC = ord('\\') +CINTR = 0177 +CQUIT = 034 +CERASE = CTRL(ord('H')) +CKILL = CTRL(ord('U')) +CEOL = 0 +CEOL2 = 0 +CEOF = CTRL(ord('d')) +CEOT = CEOF +CSTART = CTRL(ord('q')) +CSTOP = CTRL(ord('s')) +CSWTCH = CTRL(ord('z')) +CNSWTCH = 0 +CSUSP = CSWTCH +CLNEXT = CTRL(ord('v')) +CWERASE = CTRL(ord('w')) +CFLUSHO = CTRL(ord('o')) +CFLUSH = CFLUSHO +CRPRNT = CTRL(ord('r')) +CDSUSP = CTRL(ord('y')) +CBRK = 0377 +IGNBRK = 0000001 +BRKINT = 0000002 +IGNPAR = 0000004 +PARMRK = 0000010 +INPCK = 0000020 +ISTRIP = 0000040 +INLCR = 0000100 +IGNCR = 0000200 +ICRNL = 0000400 +IUCLC = 0001000 +IXON = 0002000 +IXANY = 0004000 +IXOFF = 0010000 +IMAXBEL = 0020000 +IBLKMD = 0040000 +OPOST = 0000001 +OLCUC = 0000002 +ONLCR = 0000004 +OCRNL = 0000010 +ONOCR = 0000020 +ONLRET = 0000040 +OFILL = 0000100 +OFDEL = 0000200 +NLDLY = 0000400 +NL0 = 0 +NL1 = 0000400 +CRDLY = 0003000 +CR0 = 0 +CR1 = 0001000 +CR2 = 0002000 +CR3 = 0003000 +TABDLY = 0014000 +TAB0 = 0 +TAB1 = 0004000 +TAB2 = 0010000 +TAB3 = 0014000 +XTABS = 0014000 +BSDLY = 0020000 +BS0 = 0 +BS1 = 0020000 +VTDLY = 0040000 +VT0 = 0 +VT1 = 0040000 +FFDLY = 0100000 +FF0 = 0 +FF1 = 0100000 +PAGEOUT = 0200000 +WRAP = 0400000 +CBAUD = 000000017 +CSIZE = 000000060 +CS5 = 0 +CS6 = 000000020 +CS7 = 000000040 +CS8 = 000000060 +CSTOPB = 000000100 +CREAD = 000000200 +PARENB = 000000400 +PARODD = 000001000 +HUPCL = 000002000 +CLOCAL = 000004000 +RCV1EN = 000010000 +XMT1EN = 000020000 +LOBLK = 000040000 +XCLUDE = 000100000 +CIBAUD = 003600000 +PAREXT = 004000000 +CNEW_RTSCTS = 010000000 +ISIG = 0000001 +ICANON = 0000002 +XCASE = 0000004 +ECHO = 0000010 +ECHOE = 0000020 +ECHOK = 0000040 +ECHONL = 0000100 +NOFLSH = 0000200 +IEXTEN = 0000400 +ITOSTOP = 0100000 +TOSTOP = ITOSTOP +ECHOCTL = 0001000 +ECHOPRT = 0002000 +ECHOKE = 0004000 +DEFECHO = 0010000 +FLUSHO = 0020000 +PENDIN = 0040000 +TIOC = (ord('T')<<8) +__NEW_TCGETA = (TIOC|201) +__NEW_TCSETA = (TIOC|202) +__NEW_TCSETAW = (TIOC|203) +__NEW_TCSETAF = (TIOC|204) +__OLD_TCGETA = (TIOC|1) +__OLD_TCSETA = (TIOC|2) +__OLD_TCSETAW = (TIOC|3) +__OLD_TCSETAF = (TIOC|4) +TCGETA = __NEW_TCGETA +TCSETA = __NEW_TCSETA +TCSETAW = __NEW_TCSETAW +TCSETAF = __NEW_TCSETAF +TCGETA = __OLD_TCGETA +TCSETA = __OLD_TCSETA +TCSETAW = __OLD_TCSETAW +TCSETAF = __OLD_TCSETAF +TCSBRK = (TIOC|5) +TCXONC = (TIOC|6) +TCFLSH = (TIOC|7) + +# Included from sys/ioctl.h +IOCTYPE = 0xff00 +LIOC = (ord('l')<<8) +LIOCGETP = (LIOC|1) +LIOCSETP = (LIOC|2) +LIOCGETS = (LIOC|5) +LIOCSETS = (LIOC|6) +DIOC = (ord('d')<<8) +DIOCGETC = (DIOC|1) +DIOCGETB = (DIOC|2) +DIOCSETE = (DIOC|3) + +# Included from sys/ioccom.h +IOCPARM_MASK = 0xff +IOC_VOID = 0x20000000 +IOC_OUT = 0x40000000 +IOC_IN = 0x80000000 +IOC_INOUT = (IOC_IN|IOC_OUT) + +# Included from net/soioctl.h + +# Included from sys/termio.h + +# Included from sys/termios.h +_POSIX_VDISABLE = 0 +def CTRL(c): return ((c)&037) + +IBSHIFT = 16 +NCC = 8 +NCCS = 23 +__NEW_MAX_BAUD = 500000 +VINTR = 0 +VQUIT = 1 +VERASE = 2 +VKILL = 3 +VEOF = 4 +VEOL = 5 +VEOL2 = 6 +VMIN = 4 +VTIME = 5 +VSWTCH = 7 +VSTART = 8 +VSTOP = 9 +VSUSP = 10 +VDSUSP = 11 +VREPRINT = 12 +VDISCARD = 13 +VWERASE = 14 +VLNEXT = 15 +VRPRNT = VREPRINT +VFLUSHO = VDISCARD +VCEOF = NCC +VCEOL = (NCC + 1) +CNUL = 0 +CDEL = 0377 +CESC = ord('\\') +CINTR = 0177 +CQUIT = 034 +CERASE = CTRL(ord('H')) +CKILL = CTRL(ord('U')) +CEOL = 0 +CEOL2 = 0 +CEOF = CTRL(ord('d')) +CEOT = CEOF +CSTART = CTRL(ord('q')) +CSTOP = CTRL(ord('s')) +CSWTCH = CTRL(ord('z')) +CNSWTCH = 0 +CSUSP = CSWTCH +CLNEXT = CTRL(ord('v')) +CWERASE = CTRL(ord('w')) +CFLUSHO = CTRL(ord('o')) +CFLUSH = CFLUSHO +CRPRNT = CTRL(ord('r')) +CDSUSP = CTRL(ord('y')) +CBRK = 0377 +IGNBRK = 0000001 +BRKINT = 0000002 +IGNPAR = 0000004 +PARMRK = 0000010 +INPCK = 0000020 +ISTRIP = 0000040 +INLCR = 0000100 +IGNCR = 0000200 +ICRNL = 0000400 +IUCLC = 0001000 +IXON = 0002000 +IXANY = 0004000 +IXOFF = 0010000 +IMAXBEL = 0020000 +IBLKMD = 0040000 +OPOST = 0000001 +OLCUC = 0000002 +ONLCR = 0000004 +OCRNL = 0000010 +ONOCR = 0000020 +ONLRET = 0000040 +OFILL = 0000100 +OFDEL = 0000200 +NLDLY = 0000400 +NL0 = 0 +NL1 = 0000400 +CRDLY = 0003000 +CR0 = 0 +CR1 = 0001000 +CR2 = 0002000 +CR3 = 0003000 +TABDLY = 0014000 +TAB0 = 0 +TAB1 = 0004000 +TAB2 = 0010000 +TAB3 = 0014000 +XTABS = 0014000 +BSDLY = 0020000 +BS0 = 0 +BS1 = 0020000 +VTDLY = 0040000 +VT0 = 0 +VT1 = 0040000 +FFDLY = 0100000 +FF0 = 0 +FF1 = 0100000 +PAGEOUT = 0200000 +WRAP = 0400000 +CBAUD = 000000017 +CSIZE = 000000060 +CS5 = 0 +CS6 = 000000020 +CS7 = 000000040 +CS8 = 000000060 +CSTOPB = 000000100 +CREAD = 000000200 +PARENB = 000000400 +PARODD = 000001000 +HUPCL = 000002000 +CLOCAL = 000004000 +RCV1EN = 000010000 +XMT1EN = 000020000 +LOBLK = 000040000 +XCLUDE = 000100000 +CIBAUD = 003600000 +PAREXT = 004000000 +CNEW_RTSCTS = 010000000 +ISIG = 0000001 +ICANON = 0000002 +XCASE = 0000004 +ECHO = 0000010 +ECHOE = 0000020 +ECHOK = 0000040 +ECHONL = 0000100 +NOFLSH = 0000200 +IEXTEN = 0000400 +ITOSTOP = 0100000 +TOSTOP = ITOSTOP +ECHOCTL = 0001000 +ECHOPRT = 0002000 +ECHOKE = 0004000 +DEFECHO = 0010000 +FLUSHO = 0020000 +PENDIN = 0040000 +TIOC = (ord('T')<<8) +__NEW_TCGETA = (TIOC|201) +__NEW_TCSETA = (TIOC|202) +__NEW_TCSETAW = (TIOC|203) +__NEW_TCSETAF = (TIOC|204) +__OLD_TCGETA = (TIOC|1) +__OLD_TCSETA = (TIOC|2) +__OLD_TCSETAW = (TIOC|3) +__OLD_TCSETAF = (TIOC|4) +TCGETA = __NEW_TCGETA +TCSETA = __NEW_TCSETA +TCSETAW = __NEW_TCSETAW +TCSETAF = __NEW_TCSETAF +TCGETA = __OLD_TCGETA +TCSETA = __OLD_TCSETA +TCSETAW = __OLD_TCSETAW +TCSETAF = __OLD_TCSETAF +TCSBRK = (TIOC|5) +TCXONC = (TIOC|6) +TCFLSH = (TIOC|7) +LDISC0 = 0 +LDISC1 = 1 +NTTYDISC = LDISC1 +TIOCFLUSH = (TIOC|12) +TCSETLABEL = (TIOC|31) +TCDSET = (TIOC|32) +TCBLKMD = (TIOC|33) +TIOCPKT = (TIOC|112) +TIOCPKT_DATA = 0x00 +TIOCPKT_FLUSHREAD = 0x01 +TIOCPKT_FLUSHWRITE = 0x02 +TIOCPKT_NOSTOP = 0x10 +TIOCPKT_DOSTOP = 0x20 +TIOCPKT_IOCTL = 0x40 +TIOCNOTTY = (TIOC|113) +TIOCSTI = (TIOC|114) +TFIOC = (ord('F')<<8) +oFIONREAD = (TFIOC|127) +TO_STOP = LOBLK +IOCTYPE = 0xff00 +__NEW_TCGETS = (TIOC|213) +__NEW_TCSETS = (TIOC|214) +__NEW_TCSETSW = (TIOC|215) +__NEW_TCSETSF = (TIOC|216) +__OLD_TCGETS = (TIOC|13) +__OLD_TCSETS = (TIOC|14) +__OLD_TCSETSW = (TIOC|15) +__OLD_TCSETSF = (TIOC|16) +TCGETS = __NEW_TCGETS +TCSETS = __NEW_TCSETS +TCSETSW = __NEW_TCSETSW +TCSETSF = __NEW_TCSETSF +TCGETS = __OLD_TCGETS +TCSETS = __OLD_TCSETS +TCSETSW = __OLD_TCSETSW +TCSETSF = __OLD_TCSETSF +TCSANOW = ((ord('T')<<8)|14) +TCSADRAIN = ((ord('T')<<8)|15) +TCSAFLUSH = ((ord('T')<<8)|16) +TCIFLUSH = 0 +TCOFLUSH = 1 +TCIOFLUSH = 2 +TCOOFF = 0 +TCOON = 1 +TCIOFF = 2 +TCION = 3 +tIOC = (ord('t')<<8) +TIOCGETD = (tIOC|0) +TIOCSETD = (tIOC|1) +TIOCHPCL = (tIOC|2) +TIOCGETP = (tIOC|8) +TIOCSETP = (tIOC|9) +TIOCSETN = (tIOC|10) +TIOCEXCL = (tIOC|13) +TIOCNXCL = (tIOC|14) +TIOCSETC = (tIOC|17) +TIOCGETC = (tIOC|18) +TIOCLBIS = (tIOC|127) +TIOCLBIC = (tIOC|126) +TIOCLSET = (tIOC|125) +TIOCLGET = (tIOC|124) +TIOCSBRK = (tIOC|123) +TIOCCBRK = (tIOC|122) +TIOCSDTR = (tIOC|121) +TIOCCDTR = (tIOC|120) +TIOCSLTC = (tIOC|117) +TIOCGLTC = (tIOC|116) +TIOCOUTQ = (tIOC|115) +TIOCSTOP = (tIOC|111) +TIOCSTART = (tIOC|110) +TIOCGSID = (tIOC|22) +TIOCSSID = (tIOC|24) +TIOCMSET = (tIOC|26) +TIOCMBIS = (tIOC|27) +TIOCMBIC = (tIOC|28) +TIOCMGET = (tIOC|29) +TIOCM_LE = 0001 +TIOCM_DTR = 0002 +TIOCM_RTS = 0004 +TIOCM_ST = 0010 +TIOCM_SR = 0020 +TIOCM_CTS = 0040 +TIOCM_CAR = 0100 +TIOCM_CD = TIOCM_CAR +TIOCM_RNG = 0200 +TIOCM_RI = TIOCM_RNG +TIOCM_DSR = 0400 +TIOCREMOTE = (tIOC|30) +TIOCSIGNAL = (tIOC|31) +ISPTM = ((ord('P')<<8)|1) +UNLKPT = ((ord('P')<<8)|2) +SVR4SOPEN = ((ord('P')<<8)|100) +LDIOC = (ord('D')<<8) +LDOPEN = (LDIOC|0) +LDCLOSE = (LDIOC|1) +LDCHG = (LDIOC|2) +LDGETT = (LDIOC|8) +LDSETT = (LDIOC|9) +LDSMAP = (LDIOC|10) +LDGMAP = (LDIOC|11) +LDNMAP = (LDIOC|12) +DIOC = (ord('d')<<8) +DIOCGETP = (DIOC|8) +DIOCSETP = (DIOC|9) +FIORDCHK = ((ord('f')<<8)|3) +CLNEXT = CTRL(ord('v')) +CWERASE = CTRL(ord('w')) +CFLUSHO = CTRL(ord('o')) +CFLUSH = CFLUSHO +CRPRNT = CTRL(ord('r')) +CDSUSP = CTRL(ord('y')) +__OLD_SSPEED = __OLD_B9600 +SSPEED = B9600 +TERM_NONE = 0 +TERM_TEC = 1 +TERM_V61 = 2 +TERM_V10 = 3 +TERM_TEX = 4 +TERM_D40 = 5 +TERM_H45 = 6 +TERM_D42 = 7 +TM_NONE = 0000 +TM_SNL = 0001 +TM_ANL = 0002 +TM_LCF = 0004 +TM_CECHO = 0010 +TM_CINVIS = 0020 +TM_SET = 0200 +LDISC0 = 0 +LDISC1 = 1 +NTTYDISC = LDISC1 +TIOCFLUSH = (TIOC|12) +TCSETLABEL = (TIOC|31) +TCDSET = (TIOC|32) +TCBLKMD = (TIOC|33) +TIOCPKT = (TIOC|112) +TIOCPKT_DATA = 0x00 +TIOCPKT_FLUSHREAD = 0x01 +TIOCPKT_FLUSHWRITE = 0x02 +TIOCPKT_NOSTOP = 0x10 +TIOCPKT_DOSTOP = 0x20 +TIOCPKT_IOCTL = 0x40 +TIOCNOTTY = (TIOC|113) +TIOCSTI = (TIOC|114) +TFIOC = (ord('F')<<8) +oFIONREAD = (TFIOC|127) +TO_STOP = LOBLK +IOCTYPE = 0xff00 +__NEW_TCGETS = (TIOC|213) +__NEW_TCSETS = (TIOC|214) +__NEW_TCSETSW = (TIOC|215) +__NEW_TCSETSF = (TIOC|216) +__OLD_TCGETS = (TIOC|13) +__OLD_TCSETS = (TIOC|14) +__OLD_TCSETSW = (TIOC|15) +__OLD_TCSETSF = (TIOC|16) +TCGETS = __NEW_TCGETS +TCSETS = __NEW_TCSETS +TCSETSW = __NEW_TCSETSW +TCSETSF = __NEW_TCSETSF +TCGETS = __OLD_TCGETS +TCSETS = __OLD_TCSETS +TCSETSW = __OLD_TCSETSW +TCSETSF = __OLD_TCSETSF +TCSANOW = ((ord('T')<<8)|14) +TCSADRAIN = ((ord('T')<<8)|15) +TCSAFLUSH = ((ord('T')<<8)|16) +TCIFLUSH = 0 +TCOFLUSH = 1 +TCIOFLUSH = 2 +TCOOFF = 0 +TCOON = 1 +TCIOFF = 2 +TCION = 3 +tIOC = (ord('t')<<8) +TIOCGETD = (tIOC|0) +TIOCSETD = (tIOC|1) +TIOCHPCL = (tIOC|2) +TIOCGETP = (tIOC|8) +TIOCSETP = (tIOC|9) +TIOCSETN = (tIOC|10) +TIOCEXCL = (tIOC|13) +TIOCNXCL = (tIOC|14) +TIOCSETC = (tIOC|17) +TIOCGETC = (tIOC|18) +TIOCLBIS = (tIOC|127) +TIOCLBIC = (tIOC|126) +TIOCLSET = (tIOC|125) +TIOCLGET = (tIOC|124) +TIOCSBRK = (tIOC|123) +TIOCCBRK = (tIOC|122) +TIOCSDTR = (tIOC|121) +TIOCCDTR = (tIOC|120) +TIOCSLTC = (tIOC|117) +TIOCGLTC = (tIOC|116) +TIOCOUTQ = (tIOC|115) +TIOCSTOP = (tIOC|111) +TIOCSTART = (tIOC|110) +TIOCGSID = (tIOC|22) +TIOCSSID = (tIOC|24) +TIOCMSET = (tIOC|26) +TIOCMBIS = (tIOC|27) +TIOCMBIC = (tIOC|28) +TIOCMGET = (tIOC|29) +TIOCM_LE = 0001 +TIOCM_DTR = 0002 +TIOCM_RTS = 0004 +TIOCM_ST = 0010 +TIOCM_SR = 0020 +TIOCM_CTS = 0040 +TIOCM_CAR = 0100 +TIOCM_CD = TIOCM_CAR +TIOCM_RNG = 0200 +TIOCM_RI = TIOCM_RNG +TIOCM_DSR = 0400 +TIOCREMOTE = (tIOC|30) +TIOCSIGNAL = (tIOC|31) +ISPTM = ((ord('P')<<8)|1) +UNLKPT = ((ord('P')<<8)|2) +SVR4SOPEN = ((ord('P')<<8)|100) +LDIOC = (ord('D')<<8) +LDOPEN = (LDIOC|0) +LDCLOSE = (LDIOC|1) +LDCHG = (LDIOC|2) +LDGETT = (LDIOC|8) +LDSETT = (LDIOC|9) +LDSMAP = (LDIOC|10) +LDGMAP = (LDIOC|11) +LDNMAP = (LDIOC|12) +DIOC = (ord('d')<<8) +DIOCGETP = (DIOC|8) +DIOCSETP = (DIOC|9) +FIORDCHK = ((ord('f')<<8)|3) diff --git a/Lib/plat-irix6/WAIT.py b/Lib/plat-irix6/WAIT.py new file mode 100644 index 0000000..741af3b --- /dev/null +++ b/Lib/plat-irix6/WAIT.py @@ -0,0 +1,335 @@ +# Generated by h2py from /usr/include/sys/wait.h + +# Included from standards.h +def _W_INT(i): return (i) + +WUNTRACED = 0004 +WNOHANG = 0100 +_WSTOPPED = 0177 +def WIFEXITED(stat): return ((_W_INT(stat)&0377)==0) + +def WEXITSTATUS(stat): return ((_W_INT(stat)>>8)&0377) + +def WTERMSIG(stat): return (_W_INT(stat)&0177) + +def WSTOPSIG(stat): return ((_W_INT(stat)>>8)&0377) + +WEXITED = 0001 +WTRAPPED = 0002 +WSTOPPED = 0004 +WCONTINUED = 0010 +WNOWAIT = 0200 +WOPTMASK = (WEXITED|WTRAPPED|WSTOPPED|WCONTINUED|WNOHANG|WNOWAIT) +WSTOPFLG = 0177 +WCONTFLG = 0177777 +WCOREFLAG = 0200 +WSIGMASK = 0177 +def WWORD(stat): return (_W_INT(stat)&0177777) + +def WIFCONTINUED(stat): return (WWORD(stat)==WCONTFLG) + +def WCOREDUMP(stat): return (_W_INT(stat) & WCOREFLAG) + + +# Included from sys/types.h + +# Included from sgidefs.h +_MIPS_ISA_MIPS1 = 1 +_MIPS_ISA_MIPS2 = 2 +_MIPS_ISA_MIPS3 = 3 +_MIPS_ISA_MIPS4 = 4 +_MIPS_SIM_ABI32 = 1 +_MIPS_SIM_NABI32 = 2 +_MIPS_SIM_ABI64 = 3 +P_MYID = (-1) +P_MYHOSTID = (-1) + +# Included from sys/bsd_types.h + +# Included from sys/mkdev.h +ONBITSMAJOR = 7 +ONBITSMINOR = 8 +OMAXMAJ = 0x7f +OMAXMIN = 0xff +NBITSMAJOR = 14 +NBITSMINOR = 18 +MAXMAJ = 0x1ff +MAXMIN = 0x3ffff +OLDDEV = 0 +NEWDEV = 1 +MKDEV_VER = NEWDEV +def major(dev): return __major(MKDEV_VER, dev) + +def minor(dev): return __minor(MKDEV_VER, dev) + + +# Included from sys/select.h +FD_SETSIZE = 1024 +__NBBY = 8 + +# Included from string.h +NULL = 0L +NBBY = 8 + +# Included from sys/procset.h +P_INITPID = 1 +P_INITUID = 0 +P_INITPGID = 0 + +# Included from sys/signal.h +SIGHUP = 1 +SIGINT = 2 +SIGQUIT = 3 +SIGILL = 4 +SIGTRAP = 5 +SIGIOT = 6 +SIGABRT = 6 +SIGEMT = 7 +SIGFPE = 8 +SIGKILL = 9 +SIGBUS = 10 +SIGSEGV = 11 +SIGSYS = 12 +SIGPIPE = 13 +SIGALRM = 14 +SIGTERM = 15 +SIGUSR1 = 16 +SIGUSR2 = 17 +SIGCLD = 18 +SIGCHLD = 18 +SIGPWR = 19 +SIGWINCH = 20 +SIGURG = 21 +SIGPOLL = 22 +SIGIO = 22 +SIGSTOP = 23 +SIGTSTP = 24 +SIGCONT = 25 +SIGTTIN = 26 +SIGTTOU = 27 +SIGVTALRM = 28 +SIGPROF = 29 +SIGXCPU = 30 +SIGXFSZ = 31 +SIG32 = 32 +SIGCKPT = 33 +SIGRTMIN = 49 +SIGRTMAX = 64 +SIGPTINTR = 47 +SIGPTRESCHED = 48 +__sigargs = int +SIGEV_NONE = 128 +SIGEV_SIGNAL = 129 +SIGEV_CALLBACK = 130 + +# Included from sys/siginfo.h +ILL_ILLOPC = 1 +ILL_ILLOPN = 2 +ILL_ILLADR = 3 +ILL_ILLTRP = 4 +ILL_PRVOPC = 5 +ILL_PRVREG = 6 +ILL_COPROC = 7 +ILL_BADSTK = 8 +NSIGILL = 8 +FPE_INTDIV = 1 +FPE_INTOVF = 2 +FPE_FLTDIV = 3 +FPE_FLTOVF = 4 +FPE_FLTUND = 5 +FPE_FLTRES = 6 +FPE_FLTINV = 7 +FPE_FLTSUB = 8 +NSIGFPE = 8 +SEGV_MAPERR = 1 +SEGV_ACCERR = 2 +NSIGSEGV = 2 +BUS_ADRALN = 1 +BUS_ADRERR = 2 +BUS_OBJERR = 3 +NSIGBUS = 3 +TRAP_BRKPT = 1 +TRAP_TRACE = 2 +NSIGTRAP = 2 +CLD_EXITED = 1 +CLD_KILLED = 2 +CLD_DUMPED = 3 +CLD_TRAPPED = 4 +CLD_STOPPED = 5 +CLD_CONTINUED = 6 +NSIGCLD = 6 +POLL_IN = 1 +POLL_OUT = 2 +POLL_MSG = 3 +POLL_ERR = 4 +POLL_PRI = 5 +POLL_HUP = 6 +NSIGPOLL = 6 +SI_MAXSZ = 128 +SI_USER = 0 +SI_KILL = SI_USER +SI_QUEUE = -1 +SI_ASYNCIO = -2 +SI_TIMER = -3 +SI_MESGQ = -4 +SIG_NOP = 0 +SIG_BLOCK = 1 +SIG_UNBLOCK = 2 +SIG_SETMASK = 3 +SIG_SETMASK32 = 256 +SA_ONSTACK = 0x00000001 +SA_RESETHAND = 0x00000002 +SA_RESTART = 0x00000004 +SA_SIGINFO = 0x00000008 +SA_NODEFER = 0x00000010 +SA_NOCLDWAIT = 0x00010000 +SA_NOCLDSTOP = 0x00020000 +_SA_BSDCALL = 0x10000000 +MINSIGSTKSZ = 512 +SIGSTKSZ = 8192 +SS_ONSTACK = 0x00000001 +SS_DISABLE = 0x00000002 + +# Included from sys/ucontext.h +NGREG = 36 +NGREG = 37 +GETCONTEXT = 0 +SETCONTEXT = 1 +UC_SIGMASK = 001 +UC_STACK = 002 +UC_CPU = 004 +UC_MAU = 010 +UC_MCONTEXT = (UC_CPU|UC_MAU) +UC_ALL = (UC_SIGMASK|UC_STACK|UC_MCONTEXT) +CTX_R0 = 0 +CTX_AT = 1 +CTX_V0 = 2 +CTX_V1 = 3 +CTX_A0 = 4 +CTX_A1 = 5 +CTX_A2 = 6 +CTX_A3 = 7 +CTX_T0 = 8 +CTX_T1 = 9 +CTX_T2 = 10 +CTX_T3 = 11 +CTX_T4 = 12 +CTX_T5 = 13 +CTX_T6 = 14 +CTX_T7 = 15 +CTX_A4 = 8 +CTX_A5 = 9 +CTX_A6 = 10 +CTX_A7 = 11 +CTX_T0 = 12 +CTX_T1 = 13 +CTX_T2 = 14 +CTX_T3 = 15 +CTX_S0 = 16 +CTX_S1 = 17 +CTX_S2 = 18 +CTX_S3 = 19 +CTX_S4 = 20 +CTX_S5 = 21 +CTX_S6 = 22 +CTX_S7 = 23 +CTX_T8 = 24 +CTX_T9 = 25 +CTX_K0 = 26 +CTX_K1 = 27 +CTX_GP = 28 +CTX_SP = 29 +CTX_S8 = 30 +CTX_RA = 31 +CTX_MDLO = 32 +CTX_MDHI = 33 +CTX_CAUSE = 34 +CTX_EPC = 35 +CTX_SR = 36 +CXT_R0 = CTX_R0 +CXT_AT = CTX_AT +CXT_V0 = CTX_V0 +CXT_V1 = CTX_V1 +CXT_A0 = CTX_A0 +CXT_A1 = CTX_A1 +CXT_A2 = CTX_A2 +CXT_A3 = CTX_A3 +CXT_T0 = CTX_T0 +CXT_T1 = CTX_T1 +CXT_T2 = CTX_T2 +CXT_T3 = CTX_T3 +CXT_T4 = CTX_T4 +CXT_T5 = CTX_T5 +CXT_T6 = CTX_T6 +CXT_T7 = CTX_T7 +CXT_S0 = CTX_S0 +CXT_S1 = CTX_S1 +CXT_S2 = CTX_S2 +CXT_S3 = CTX_S3 +CXT_S4 = CTX_S4 +CXT_S5 = CTX_S5 +CXT_S6 = CTX_S6 +CXT_S7 = CTX_S7 +CXT_T8 = CTX_T8 +CXT_T9 = CTX_T9 +CXT_K0 = CTX_K0 +CXT_K1 = CTX_K1 +CXT_GP = CTX_GP +CXT_SP = CTX_SP +CXT_S8 = CTX_S8 +CXT_RA = CTX_RA +CXT_MDLO = CTX_MDLO +CXT_MDHI = CTX_MDHI +CXT_CAUSE = CTX_CAUSE +CXT_EPC = CTX_EPC +CXT_SR = CTX_SR +SV_ONSTACK = 0x0001 +SV_INTERRUPT = 0x0002 +NUMBSDSIGS = (32) +def sigmask(sig): return (1L << ((sig)-1)) + +def sigmask(sig): return (1L << ((sig)-1)) + +SIG_ERR = (-1) +SIG_IGN = (1) +SIG_HOLD = (2) +SIG_DFL = (0) +NSIG = 65 +MAXSIG = (NSIG-1) +NUMSIGS = (NSIG-1) +BRK_USERBP = 0 +BRK_KERNELBP = 1 +BRK_ABORT = 2 +BRK_BD_TAKEN = 3 +BRK_BD_NOTTAKEN = 4 +BRK_SSTEPBP = 5 +BRK_OVERFLOW = 6 +BRK_DIVZERO = 7 +BRK_RANGE = 8 +BRK_PSEUDO_OP_BIT = 0x80 +BRK_PSEUDO_OP_MAX = 0x3 +BRK_CACHE_SYNC = 0x80 +BRK_SWASH_FLUSH = 0x81 +BRK_SWASH_SWTCH = 0x82 +BRK_MULOVF = 1023 + +# Included from sys/resource.h +PRIO_MIN = -20 +PRIO_MAX = 20 +PRIO_PROCESS = 0 +PRIO_PGRP = 1 +PRIO_USER = 2 +RUSAGE_SELF = 0 +RUSAGE_CHILDREN = -1 +RLIMIT_CPU = 0 +RLIMIT_FSIZE = 1 +RLIMIT_DATA = 2 +RLIMIT_STACK = 3 +RLIMIT_CORE = 4 +RLIMIT_NOFILE = 5 +RLIMIT_VMEM = 6 +RLIMIT_RSS = 7 +RLIMIT_AS = RLIMIT_VMEM +RLIM_NLIMITS = 8 +RLIM32_INFINITY = 0x7fffffff +RLIM_INFINITY = 0x7fffffff diff --git a/Lib/plat-irix6/cddb.py b/Lib/plat-irix6/cddb.py new file mode 100644 index 0000000..57cf3c6 --- /dev/null +++ b/Lib/plat-irix6/cddb.py @@ -0,0 +1,208 @@ +# This file implements a class which forms an interface to the .cddb +# directory that is maintained by SGI's cdman program. +# +# Usage is as follows: +# +# import readcd +# r = readcd.Readcd() +# c = Cddb(r.gettrackinfo()) +# +# Now you can use c.artist, c.title and c.track[trackno] (where trackno +# starts at 1). When the CD is not recognized, all values will be the empty +# string. +# It is also possible to set the above mentioned variables to new values. +# You can then use c.write() to write out the changed values to the +# .cdplayerrc file. + +import string, posix, os + +_cddbrc = '.cddb' +_DB_ID_NTRACKS = 5 +_dbid_map = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ@_=+abcdefghijklmnopqrstuvwxyz' +def _dbid(v): + if v >= len(_dbid_map): + return string.zfill(v, 2) + else: + return _dbid_map[v] + +def tochash(toc): + if type(toc) == type(''): + tracklist = [] + for i in range(2, len(toc), 4): + tracklist.append((None, + (string.atoi(toc[i:i+2]), + string.atoi(toc[i+2:i+4])))) + else: + tracklist = toc + ntracks = len(tracklist) + hash = _dbid((ntracks >> 4) & 0xF) + _dbid(ntracks & 0xF) + if ntracks <= _DB_ID_NTRACKS: + nidtracks = ntracks + else: + nidtracks = _DB_ID_NTRACKS - 1 + min = 0 + sec = 0 + for track in tracklist: + start, length = track + min = min + length[0] + sec = sec + length[1] + min = min + sec / 60 + sec = sec % 60 + hash = hash + _dbid(min) + _dbid(sec) + for i in range(nidtracks): + start, length = tracklist[i] + hash = hash + _dbid(length[0]) + _dbid(length[1]) + return hash + +class Cddb: + def __init__(self, tracklist): + if os.environ.has_key('CDDB_PATH'): + path = os.environ['CDDB_PATH'] + cddb_path = string.splitfields(path, ',') + else: + home = os.environ['HOME'] + cddb_path = [home + '/' + _cddbrc] + + self._get_id(tracklist) + + for dir in cddb_path: + file = dir + '/' + self.id + '.rdb' + try: + f = open(file, 'r') + self.file = file + break + except IOError: + pass + ntracks = string.atoi(self.id[:2], 16) + self.artist = '' + self.title = '' + self.track = [None] + [''] * ntracks + self.trackartist = [None] + [''] * ntracks + self.notes = [] + if not hasattr(self, 'file'): + return + import regex + reg = regex.compile('^\\([^.]*\\)\\.\\([^:]*\\):[\t ]+\\(.*\\)') + while 1: + line = f.readline() + if not line: + break + if reg.match(line) == -1: + print 'syntax error in ' + file + continue + name1 = line[reg.regs[1][0]:reg.regs[1][1]] + name2 = line[reg.regs[2][0]:reg.regs[2][1]] + value = line[reg.regs[3][0]:reg.regs[3][1]] + if name1 == 'album': + if name2 == 'artist': + self.artist = value + elif name2 == 'title': + self.title = value + elif name2 == 'toc': + if not self.toc: + self.toc = value + if self.toc != value: + print 'toc\'s don\'t match' + elif name2 == 'notes': + self.notes.append(value) + elif name1[:5] == 'track': + try: + trackno = string.atoi(name1[5:]) + except strings.atoi_error: + print 'syntax error in ' + file + continue + if trackno > ntracks: + print 'track number ' + `trackno` + \ + ' in file ' + file + \ + ' out of range' + continue + if name2 == 'title': + self.track[trackno] = value + elif name2 == 'artist': + self.trackartist[trackno] = value + f.close() + for i in range(2, len(self.track)): + track = self.track[i] + # if track title starts with `,', use initial part + # of previous track's title + if track and track[0] == ',': + try: + off = string.index(self.track[i - 1], + ',') + except string.index_error: + pass + else: + self.track[i] = self.track[i-1][:off] \ + + track + + def _get_id(self, tracklist): + # fill in self.id and self.toc. + # if the argument is a string ending in .rdb, the part + # upto the suffix is taken as the id. + if type(tracklist) == type(''): + if tracklist[-4:] == '.rdb': + self.id = tracklist[:-4] + self.toc = '' + return + t = [] + for i in range(2, len(tracklist), 4): + t.append((None, \ + (string.atoi(tracklist[i:i+2]), \ + string.atoi(tracklist[i+2:i+4])))) + tracklist = t + ntracks = len(tracklist) + self.id = _dbid((ntracks >> 4) & 0xF) + _dbid(ntracks & 0xF) + if ntracks <= _DB_ID_NTRACKS: + nidtracks = ntracks + else: + nidtracks = _DB_ID_NTRACKS - 1 + min = 0 + sec = 0 + for track in tracklist: + start, length = track + min = min + length[0] + sec = sec + length[1] + min = min + sec / 60 + sec = sec % 60 + self.id = self.id + _dbid(min) + _dbid(sec) + for i in range(nidtracks): + start, length = tracklist[i] + self.id = self.id + _dbid(length[0]) + _dbid(length[1]) + self.toc = string.zfill(ntracks, 2) + for track in tracklist: + start, length = track + self.toc = self.toc + string.zfill(length[0], 2) + \ + string.zfill(length[1], 2) + + def write(self): + import posixpath + if os.environ.has_key('CDDB_WRITE_DIR'): + dir = os.environ['CDDB_WRITE_DIR'] + else: + dir = os.environ['HOME'] + '/' + _cddbrc + file = dir + '/' + self.id + '.rdb' + if posixpath.exists(file): + # make backup copy + posix.rename(file, file + '~') + f = open(file, 'w') + f.write('album.title:\t' + self.title + '\n') + f.write('album.artist:\t' + self.artist + '\n') + f.write('album.toc:\t' + self.toc + '\n') + for note in self.notes: + f.write('album.notes:\t' + note + '\n') + prevpref = None + for i in range(1, len(self.track)): + if self.trackartist[i]: + f.write('track'+`i`+'.artist:\t'+self.trackartist[i]+'\n') + track = self.track[i] + try: + off = string.index(track, ',') + except string.index_error: + prevpref = None + else: + if prevpref and track[:off] == prevpref: + track = track[off:] + else: + prevpref = track[:off] + f.write('track' + `i` + '.title:\t' + track + '\n') + f.close() diff --git a/Lib/plat-irix6/cdplayer.py b/Lib/plat-irix6/cdplayer.py new file mode 100644 index 0000000..5c2c95a --- /dev/null +++ b/Lib/plat-irix6/cdplayer.py @@ -0,0 +1,89 @@ +# This file implements a class which forms an interface to the .cdplayerrc +# file that is maintained by SGI's cdplayer program. +# +# Usage is as follows: +# +# import readcd +# r = readcd.Readcd() +# c = Cdplayer(r.gettrackinfo()) +# +# Now you can use c.artist, c.title and c.track[trackno] (where trackno +# starts at 1). When the CD is not recognized, all values will be the empty +# string. +# It is also possible to set the above mentioned variables to new values. +# You can then use c.write() to write out the changed values to the +# .cdplayerrc file. + +cdplayerrc = '.cdplayerrc' + +class Cdplayer: + def __init__(self, tracklist): + import string + self.artist = '' + self.title = '' + if type(tracklist) == type(''): + t = [] + for i in range(2, len(tracklist), 4): + t.append((None, \ + (string.atoi(tracklist[i:i+2]), \ + string.atoi(tracklist[i+2:i+4])))) + tracklist = t + self.track = [None] + [''] * len(tracklist) + self.id = 'd' + string.zfill(len(tracklist), 2) + for track in tracklist: + start, length = track + self.id = self.id + string.zfill(length[0], 2) + \ + string.zfill(length[1], 2) + try: + import posix + f = open(posix.environ['HOME'] + '/' + cdplayerrc, 'r') + except IOError: + return + import regex + reg = regex.compile('^\\([^:]*\\):\t\\(.*\\)') + s = self.id + '.' + l = len(s) + while 1: + line = f.readline() + if line == '': + break + if line[:l] == s: + line = line[l:] + if reg.match(line) == -1: + print 'syntax error in ~/' + cdplayerrc + continue + name = line[reg.regs[1][0]:reg.regs[1][1]] + value = line[reg.regs[2][0]:reg.regs[2][1]] + if name == 'title': + self.title = value + elif name == 'artist': + self.artist = value + elif name[:5] == 'track': + trackno = string.atoi(name[6:]) + self.track[trackno] = value + f.close() + + def write(self): + import posix + filename = posix.environ['HOME'] + '/' + cdplayerrc + try: + old = open(filename, 'r') + except IOError: + old = open('/dev/null', 'r') + new = open(filename + '.new', 'w') + s = self.id + '.' + l = len(s) + while 1: + line = old.readline() + if line == '': + break + if line[:l] <> s: + new.write(line) + new.write(self.id + '.title:\t' + self.title + '\n') + new.write(self.id + '.artist:\t' + self.artist + '\n') + for i in range(1, len(self.track)): + new.write(self.id + '.track.' + `i` + ':\t' + \ + self.track[i] + '\n') + old.close() + new.close() + posix.rename(filename + '.new', filename) diff --git a/Lib/plat-irix6/flp.doc b/Lib/plat-irix6/flp.doc new file mode 100644 index 0000000..1a2f374 --- /dev/null +++ b/Lib/plat-irix6/flp.doc @@ -0,0 +1,117 @@ +.SH +Module flp +.LP +The flp module loads fl-forms from fd files, as generated +by fdesign. The module is designed to be flexible enough to allow +almost anything to be done with the loaded form. +.LP +Loadform defines +two types of functions: functions to parse fd files and functions to +create the forms from the templates returned by the parse functions. +There are fairly low-level create functions that create single objects, +and convenience routines that create complete forms, including callbacks, +etc. +.LP +The exception flp.error is raised whenever an error occurs while parsing a forms +definition file or creating a form. +.SH 2 +Parsing functions +.LP +There are two parsing functions, parse_form() and parse_forms(). They +take the following form: +.LP +.ft C +ftuple = parse_form(filename, formname) +.br +ftdict = parse_forms(filename) +.IP +Parse_form parses a single form, and returns a tuple (ftmp, otmplist). +Ftmp is a template for a form, otmplist is a list of templates for +objects. See below for a description of these templates. +.IP +Parse_forms parses all forms in an fd file. It returns a dictionary of +(ftmp, otmplist) tuples, indexed by formname. +.IP +Filename is the name of the forms definition file to inspect. The functions +appends '.fd' if needed, and use 'sys.path' to locate the file. +.IP +formname is the name of the form to load. This argument is mandatory, +even if the file only contains one form. +.LP +The form template and object template are structures that contain all +the information read from the fd file, in 'natural' form. A form +template record contains the following fields: +.IP +.nf +"Name", the name of the form; +"Width", the width of the form; +"Height", the height of the form; and +"Numberofobjects", the number of objects in the form. +.LP +An object template contains the following fields: +.IP +.nf +"Class", the class of object (eg. FL.BUTTON); +"Type", the sub-class (eg. FL.NORMALBUTTON); +"Box", a list with four members: [x, y, width, height]; +"Boxtype", the type of box (eg. FL.DOWNBOX); +"Colors", a list with the two object colors; +"Alignment", the label alignment (eg. FL.ALIGNLEFT); +"Style", the label style (eg. FL.BOLDSTYLE); +"Lcol", the label color; +"Label", a string containing the label; +"Name", a string containing the name of the object; +"Callback", a string containing the callback routine name; and +"Argument", a string containing the callback routine extra argument. +.SH +Low-level create routines. +.LP +The three low-level creation routines are called as follows: +.LP +.ft C +form = create_form(form_template) +.IP +Create an fl form from a form template. Returns the form created. +.LP +.ft C +obj = create_object(form, obj_template) +.IP +Create an object in an fl form. Return the new object. +An error is raised if the object has a callback routine. +.SH +High-level create routines. +.LP +The 'standard' way to handle forms in python is to define a class +that contains the form and all the objects (insofar as they are named), +and that defines all the callback functions, and use an instance of +this class to handle the form interaction. +Flp contains three routines that simplify handling this paradigm: +.LP +.ft C +create_full_form(instance, ftuple) +.IP +This routine takes an instance of your form-handling class and an +ftuple (as returned by the parsing routines) as parameters. It inserts +the form into the instance, defines all object names and arranges that +the callback methods are called. All the names inserted into the +instance are the same as the names used for the objects, etc. in the +fd file. +.LP +.ft C +merge_full_form(instance, form, ftuple) +.IP +This function does the same as create_full_form, only it does not create +the form itself nor the 'background box' that fdesign automatically +adds to each form. This is useful if your class inherits a superclass +that already defines a skeleton form (with 'OK' and 'Cancel' buttons, +for instance), and you want to merge the new form into that existing +form. The 'form' parameter is the form to which the new objects are +added. +.LP +If you use the paradigm sketched here but need slightly more control +over object creation there is a routine that creates a single object +and inserts its name (and arranges for the callback routine to be +called): +.LP +.ft C +create_object_instance(instance, form, obj_template) diff --git a/Lib/plat-irix6/flp.py b/Lib/plat-irix6/flp.py new file mode 100644 index 0000000..14e2278 --- /dev/null +++ b/Lib/plat-irix6/flp.py @@ -0,0 +1,455 @@ +# +# flp - Module to load fl forms from fd files +# +# Jack Jansen, December 1991 +# +import string +import os +import sys +import FL + +SPLITLINE = '--------------------' +FORMLINE = '=============== FORM ===============' +ENDLINE = '==============================' + +error = 'flp.error' + +################################################################## +# Part 1 - The parsing routines # +################################################################## + +# +# Externally visible function. Load form. +# +def parse_form(filename, formname): + forms = checkcache(filename) + if forms is None: + forms = parse_forms(filename) + if forms.has_key(formname): + return forms[formname] + else: + raise error, 'No such form in fd file' + +# +# Externally visible function. Load all forms. +# +def parse_forms(filename): + forms = checkcache(filename) + if forms != None: return forms + fp = _open_formfile(filename) + nforms = _parse_fd_header(fp) + forms = {} + for i in range(nforms): + form = _parse_fd_form(fp, None) + forms[form[0].Name] = form + writecache(filename, forms) + return forms + +# +# Internal: see if a cached version of the file exists +# +MAGIC = '.fdc' +_internal_cache = {} # Used by frozen scripts only +def checkcache(filename): + if _internal_cache.has_key(filename): + altforms = _internal_cache[filename] + return _unpack_cache(altforms) + import marshal + fp, filename = _open_formfile2(filename) + fp.close() + cachename = filename + 'c' + try: + fp = open(cachename, 'r') + except IOError: + #print 'flp: no cache file', cachename + return None + try: + if fp.read(4) != MAGIC: + print 'flp: bad magic word in cache file', cachename + return None + cache_mtime = rdlong(fp) + file_mtime = getmtime(filename) + if cache_mtime != file_mtime: + #print 'flp: outdated cache file', cachename + return None + #print 'flp: valid cache file', cachename + altforms = marshal.load(fp) + return _unpack_cache(altforms) + finally: + fp.close() + +def _unpack_cache(altforms): + forms = {} + for name in altforms.keys(): + altobj, altlist = altforms[name] + obj = _newobj() + obj.make(altobj) + list = [] + for altobj in altlist: + nobj = _newobj() + nobj.make(altobj) + list.append(nobj) + forms[name] = obj, list + return forms + +def rdlong(fp): + s = fp.read(4) + if len(s) != 4: return None + a, b, c, d = s[0], s[1], s[2], s[3] + return ord(a)<<24 | ord(b)<<16 | ord(c)<<8 | ord(d) + +def wrlong(fp, x): + a, b, c, d = (x>>24)&0xff, (x>>16)&0xff, (x>>8)&0xff, x&0xff + fp.write(chr(a) + chr(b) + chr(c) + chr(d)) + +def getmtime(filename): + import os + from stat import ST_MTIME + try: + return os.stat(filename)[ST_MTIME] + except os.error: + return None + +# +# Internal: write cached version of the form (parsing is too slow!) +# +def writecache(filename, forms): + import marshal + fp, filename = _open_formfile2(filename) + fp.close() + cachename = filename + 'c' + try: + fp = open(cachename, 'w') + except IOError: + print 'flp: can\'t create cache file', cachename + return # Never mind + fp.write('\0\0\0\0') # Seek back and write MAGIC when done + wrlong(fp, getmtime(filename)) + altforms = _pack_cache(forms) + marshal.dump(altforms, fp) + fp.seek(0) + fp.write(MAGIC) + fp.close() + #print 'flp: wrote cache file', cachename + +# +# External: print some statements that set up the internal cache. +# This is for use with the "freeze" script. You should call +# flp.freeze(filename) for all forms used by the script, and collect +# the output on a file in a module file named "frozenforms.py". Then +# in the main program of the script import frozenforms. +# (Don't forget to take this out when using the unfrozen version of +# the script!) +# +def freeze(filename): + forms = parse_forms(filename) + altforms = _pack_cache(forms) + print 'import flp' + print 'flp._internal_cache[', `filename`, '] =', altforms + +# +# Internal: create the data structure to be placed in the cache +# +def _pack_cache(forms): + altforms = {} + for name in forms.keys(): + obj, list = forms[name] + altobj = obj.__dict__ + altlist = [] + for obj in list: altlist.append(obj.__dict__) + altforms[name] = altobj, altlist + return altforms + +# +# Internal: Locate form file (using PYTHONPATH) and open file +# +def _open_formfile(filename): + return _open_formfile2(filename)[0] + +def _open_formfile2(filename): + if filename[-3:] <> '.fd': + filename = filename + '.fd' + if filename[0] == '/': + try: + fp = open(filename,'r') + except IOError: + fp = None + else: + for pc in sys.path: + pn = os.path.join(pc, filename) + try: + fp = open(pn, 'r') + filename = pn + break + except IOError: + fp = None + if fp == None: + raise error, 'Cannot find forms file ' + filename + return fp, filename + +# +# Internal: parse the fd file header, return number of forms +# +def _parse_fd_header(file): + # First read the magic header line + datum = _parse_1_line(file) + if datum <> ('Magic', 12321): + raise error, 'Not a forms definition file' + # Now skip until we know number of forms + while 1: + datum = _parse_1_line(file) + if type(datum) == type(()) and datum[0] == 'Numberofforms': + break + return datum[1] +# +# Internal: parse fd form, or skip if name doesn't match. +# the special value None means 'allways parse it'. +# +def _parse_fd_form(file, name): + datum = _parse_1_line(file) + if datum <> FORMLINE: + raise error, 'Missing === FORM === line' + form = _parse_object(file) + if form.Name == name or name == None: + objs = [] + for j in range(form.Numberofobjects): + obj = _parse_object(file) + objs.append(obj) + return (form, objs) + else: + for j in range(form.Numberofobjects): + _skip_object(file) + return None + +# +# Internal class: a convient place to store object info fields +# +class _newobj: + def add(self, name, value): + self.__dict__[name] = value + def make(self, dict): + for name in dict.keys(): + self.add(name, dict[name]) + +# +# Internal parsing routines. +# +def _parse_string(str): + if '\\' in str: + s = '\'' + str + '\'' + try: + return eval(s) + except: + pass + return str + +def _parse_num(str): + return eval(str) + +def _parse_numlist(str): + slist = string.split(str) + nlist = [] + for i in slist: + nlist.append(_parse_num(i)) + return nlist + +# This dictionary maps item names to parsing routines. +# If no routine is given '_parse_num' is default. +_parse_func = { \ + 'Name': _parse_string, \ + 'Box': _parse_numlist, \ + 'Colors': _parse_numlist, \ + 'Label': _parse_string, \ + 'Name': _parse_string, \ + 'Callback': _parse_string, \ + 'Argument': _parse_string } + +# This function parses a line, and returns either +# a string or a tuple (name,value) + +import regex +prog = regex.compile('^\([^:]*\): *\(.*\)') + +def _parse_line(line): + if prog.match(line) < 0: + return line + a = prog.regs + name = line[:a[1][1]] + if name[0] == 'N': + name = string.joinfields(string.split(name),'') + name = string.lower(name) + name = string.upper(name[0]) + name[1:] + value = line[a[2][0]:] + try: + pf = _parse_func[name] + except KeyError: + pf = _parse_num + value = pf(value) + return (name, value) + +def _readline(file): + line = file.readline() + if not line: + raise EOFError + return line[:-1] + +def _parse_1_line(file): + line = _readline(file) + while line == '': + line = _readline(file) + return _parse_line(line) + +def _skip_object(file): + line = '' + while not line in (SPLITLINE, FORMLINE, ENDLINE): + pos = file.tell() + line = _readline(file) + if line == FORMLINE: + file.seek(pos) + +def _parse_object(file): + obj = _newobj() + while 1: + pos = file.tell() + datum = _parse_1_line(file) + if datum in (SPLITLINE, FORMLINE, ENDLINE): + if datum == FORMLINE: + file.seek(pos) + return obj + if type(datum) <> type(()) or len(datum) <> 2: + raise error, 'Parse error, illegal line in object: '+datum + obj.add(datum[0], datum[1]) + +################################################################# +# Part 2 - High-level object/form creation routines # +################################################################# + +# +# External - Create a form an link to an instance variable. +# +def create_full_form(inst, (fdata, odatalist)): + form = create_form(fdata) + exec 'inst.'+fdata.Name+' = form\n' + for odata in odatalist: + create_object_instance(inst, form, odata) + +# +# External - Merge a form into an existing form in an instance +# variable. +# +def merge_full_form(inst, form, (fdata, odatalist)): + exec 'inst.'+fdata.Name+' = form\n' + if odatalist[0].Class <> FL.BOX: + raise error, 'merge_full_form() expects FL.BOX as first obj' + for odata in odatalist[1:]: + create_object_instance(inst, form, odata) + + +################################################################# +# Part 3 - Low-level object/form creation routines # +################################################################# + +# +# External Create_form - Create form from parameters +# +def create_form(fdata): + import fl + return fl.make_form(FL.NO_BOX, fdata.Width, fdata.Height) + +# +# External create_object - Create an object. Make sure there are +# no callbacks. Returns the object created. +# +def create_object(form, odata): + obj = _create_object(form, odata) + if odata.Callback: + raise error, 'Creating free object with callback' + return obj +# +# External create_object_instance - Create object in an instance. +# +def create_object_instance(inst, form, odata): + obj = _create_object(form, odata) + if odata.Callback: + cbfunc = eval('inst.'+odata.Callback) + obj.set_call_back(cbfunc, odata.Argument) + if odata.Name: + exec 'inst.' + odata.Name + ' = obj\n' +# +# Internal _create_object: Create the object and fill options +# +def _create_object(form, odata): + crfunc = _select_crfunc(form, odata.Class) + obj = crfunc(odata.Type, odata.Box[0], odata.Box[1], odata.Box[2], \ + odata.Box[3], odata.Label) + if not odata.Class in (FL.BEGIN_GROUP, FL.END_GROUP): + obj.boxtype = odata.Boxtype + obj.col1 = odata.Colors[0] + obj.col2 = odata.Colors[1] + obj.align = odata.Alignment + obj.lstyle = odata.Style + obj.lsize = odata.Size + obj.lcol = odata.Lcol + return obj +# +# Internal crfunc: helper function that returns correct create function +# +def _select_crfunc(fm, cl): + if cl == FL.BEGIN_GROUP: return fm.bgn_group + elif cl == FL.END_GROUP: return fm.end_group + elif cl == FL.BITMAP: return fm.add_bitmap + elif cl == FL.BOX: return fm.add_box + elif cl == FL.BROWSER: return fm.add_browser + elif cl == FL.BUTTON: return fm.add_button + elif cl == FL.CHART: return fm.add_chart + elif cl == FL.CHOICE: return fm.add_choice + elif cl == FL.CLOCK: return fm.add_clock + elif cl == FL.COUNTER: return fm.add_counter + elif cl == FL.DIAL: return fm.add_dial + elif cl == FL.FREE: return fm.add_free + elif cl == FL.INPUT: return fm.add_input + elif cl == FL.LIGHTBUTTON: return fm.add_lightbutton + elif cl == FL.MENU: return fm.add_menu + elif cl == FL.POSITIONER: return fm.add_positioner + elif cl == FL.ROUNDBUTTON: return fm.add_roundbutton + elif cl == FL.SLIDER: return fm.add_slider + elif cl == FL.VALSLIDER: return fm.add_valslider + elif cl == FL.TEXT: return fm.add_text + elif cl == FL.TIMER: return fm.add_timer + else: + raise error, 'Unknown object type: ' + `cl` + + +def test(): + import time + t0 = time.time() + if len(sys.argv) == 2: + forms = parse_forms(sys.argv[1]) + t1 = time.time() + print 'parse time:', 0.001*(t1-t0), 'sec.' + keys = forms.keys() + keys.sort() + for i in keys: + _printform(forms[i]) + elif len(sys.argv) == 3: + form = parse_form(sys.argv[1], sys.argv[2]) + t1 = time.time() + print 'parse time:', round(t1-t0, 3), 'sec.' + _printform(form) + else: + print 'Usage: test fdfile [form]' + +def _printform(form): + f = form[0] + objs = form[1] + print 'Form ', f.Name, ', size: ', f.Width, f.Height, ' Nobj ', f.Numberofobjects + for i in objs: + print ' Obj ', i.Name, ' type ', i.Class, i.Type + print ' Box ', i.Box, ' btype ', i.Boxtype + print ' Label ', i.Label, ' size/style/col/align ', i.Size,i.Style, i.Lcol, i.Alignment + print ' cols ', i.Colors + print ' cback ', i.Callback, i.Argument + +# Local variables: +# py-indent-offset: 4 +# end: diff --git a/Lib/plat-irix6/jpeg.py b/Lib/plat-irix6/jpeg.py new file mode 100644 index 0000000..85d6d83 --- /dev/null +++ b/Lib/plat-irix6/jpeg.py @@ -0,0 +1,110 @@ +# Implement 'jpeg' interface using SGI's compression library + +# XXX Options 'smooth' and 'optimize' are ignored. + +# XXX It appears that compressing grayscale images doesn't work right; +# XXX the resulting file causes weirdness. + +error = 'jpeg.error' # Exception + +options = {'quality': 75, 'optimize': 0, 'smooth': 0, 'forcegray': 0} + +comp = None +decomp = None + +def compress(imgdata, width, height, bytesperpixel): + global comp + import cl, CL + if comp is None: comp = cl.OpenCompressor(CL.JPEG) + if bytesperpixel == 1: + format = CL.GRAYSCALE + elif bytesperpixel == 4: + format = CL.RGBX + if options['forcegray']: + iformat = CL.GRAYSCALE + else: + iformat = CL.YUV + # XXX How to support 'optimize'? + params = [CL.IMAGE_WIDTH, width, CL.IMAGE_HEIGHT, height, \ + CL.ORIGINAL_FORMAT, format, \ + CL.ORIENTATION, CL.BOTTOM_UP, \ + CL.QUALITY_FACTOR, options['quality'], \ + CL.INTERNAL_FORMAT, iformat, \ + ] + comp.SetParams(params) + jpegdata = comp.Compress(1, imgdata) + return jpegdata + +def decompress(jpegdata): + global decomp + import cl, CL + if decomp is None: decomp = cl.OpenDecompressor(CL.JPEG) + headersize = decomp.ReadHeader(jpegdata) + params = [CL.IMAGE_WIDTH, 0, CL.IMAGE_HEIGHT, 0, CL.INTERNAL_FORMAT, 0] + decomp.GetParams(params) + width, height, format = params[1], params[3], params[5] + if format == CL.GRAYSCALE or options['forcegray']: + format = CL.GRAYSCALE + bytesperpixel = 1 + else: + format = CL.RGBX + bytesperpixel = 4 + # XXX How to support 'smooth'? + params = [CL.ORIGINAL_FORMAT, format, \ + CL.ORIENTATION, CL.BOTTOM_UP, \ + CL.FRAME_BUFFER_SIZE, width*height*bytesperpixel] + decomp.SetParams(params) + imgdata = decomp.Decompress(1, jpegdata) + return imgdata, width, height, bytesperpixel + +def setoption(name, value): + if type(value) <> type(0): + raise TypeError, 'jpeg.setoption: numeric options only' + if name == 'forcegrey': + name = 'forcegray' + if not options.has_key(name): + raise KeyError, 'jpeg.setoption: unknown option name' + options[name] = int(value) + +def test(): + import sys + if sys.argv[1:2] == ['-g']: + del sys.argv[1] + setoption('forcegray', 1) + if not sys.argv[1:]: + sys.argv.append('/usr/local/images/data/jpg/asterix.jpg') + for file in sys.argv[1:]: + show(file) + +def show(file): + import gl, GL, DEVICE + jpegdata = open(file, 'r').read() + imgdata, width, height, bytesperpixel = decompress(jpegdata) + gl.foreground() + gl.prefsize(width, height) + win = gl.winopen(file) + if bytesperpixel == 1: + gl.cmode() + gl.pixmode(GL.PM_SIZE, 8) + gl.gconfig() + for i in range(256): + gl.mapcolor(i, i, i, i) + else: + gl.RGBmode() + gl.pixmode(GL.PM_SIZE, 32) + gl.gconfig() + gl.qdevice(DEVICE.REDRAW) + gl.qdevice(DEVICE.ESCKEY) + gl.qdevice(DEVICE.WINQUIT) + gl.qdevice(DEVICE.WINSHUT) + gl.lrectwrite(0, 0, width-1, height-1, imgdata) + while 1: + dev, val = gl.qread() + if dev in (DEVICE.ESCKEY, DEVICE.WINSHUT, DEVICE.WINQUIT): + break + if dev == DEVICE.REDRAW: + gl.lrectwrite(0, 0, width-1, height-1, imgdata) + gl.winclose(win) + # Now test the compression and write the result to a fixed filename + newjpegdata = compress(imgdata, width, height, bytesperpixel) + open('/tmp/j.jpg', 'w').write(newjpegdata) diff --git a/Lib/plat-irix6/panel.py b/Lib/plat-irix6/panel.py new file mode 100644 index 0000000..2c0365c --- /dev/null +++ b/Lib/plat-irix6/panel.py @@ -0,0 +1,281 @@ +# Module 'panel' +# +# Support for the Panel library. +# Uses built-in module 'pnl'. +# Applciations should use 'panel.function' instead of 'pnl.function'; +# most 'pnl' functions are transparently exported by 'panel', +# but dopanel() is overridden and you have to use this version +# if you want to use callbacks. + + +import pnl + + +debug = 0 + + +# Test if an object is a list. +# +def is_list(x): + return type(x) == type([]) + + +# Reverse a list. +# +def reverse(list): + res = [] + for item in list: + res.insert(0, item) + return res + + +# Get an attribute of a list, which may itself be another list. +# Don't use 'prop' for name. +# +def getattrlist(list, name): + for item in list: + if item and is_list(item) and item[0] == name: + return item[1:] + return [] + + +# Get a property of a list, which may itself be another list. +# +def getproplist(list, name): + for item in list: + if item and is_list(item) and item[0] == 'prop': + if len(item) > 1 and item[1] == name: + return item[2:] + return [] + + +# Test if an actuator description contains the property 'end-of-group' +# +def is_endgroup(list): + x = getproplist(list, 'end-of-group') + return (x and x[0] == '#t') + + +# Neatly display an actuator definition given as S-expression +# the prefix string is printed before each line. +# +def show_actuator(prefix, a): + for item in a: + if not is_list(item): + print prefix, item + elif item and item[0] == 'al': + print prefix, 'Subactuator list:' + for a in item[1:]: + show_actuator(prefix + ' ', a) + elif len(item) == 2: + print prefix, item[0], '=>', item[1] + elif len(item) == 3 and item[0] == 'prop': + print prefix, 'Prop', item[1], '=>', + print item[2] + else: + print prefix, '?', item + + +# Neatly display a panel. +# +def show_panel(prefix, p): + for item in p: + if not is_list(item): + print prefix, item + elif item and item[0] == 'al': + print prefix, 'Actuator list:' + for a in item[1:]: + show_actuator(prefix + ' ', a) + elif len(item) == 2: + print prefix, item[0], '=>', item[1] + elif len(item) == 3 and item[0] == 'prop': + print prefix, 'Prop', item[1], '=>', + print item[2] + else: + print prefix, '?', item + + +# Exception raised by build_actuator or build_panel. +# +panel_error = 'panel error' + + +# Dummy callback used to initialize the callbacks. +# +def dummy_callback(arg): + pass + + +# Assign attributes to members of the target. +# Attribute names in exclist are ignored. +# The member name is the attribute name prefixed with the prefix. +# +def assign_members(target, attrlist, exclist, prefix): + for item in attrlist: + if is_list(item) and len(item) == 2 and item[0] not in exclist: + name, value = item[0], item[1] + ok = 1 + if value[0] in '-0123456789': + value = eval(value) + elif value[0] == '"': + value = value[1:-1] + elif value == 'move-then-resize': + # Strange default set by Panel Editor... + ok = 0 + else: + print 'unknown value', value, 'for', name + ok = 0 + if ok: + lhs = 'target.' + prefix + name + stmt = lhs + '=' + `value` + if debug: print 'exec', stmt + try: + exec stmt + '\n' + except KeyboardInterrupt: # Don't catch this! + raise KeyboardInterrupt + except: + print 'assign failed:', stmt + + +# Build a real actuator from an actuator descriptior. +# Return a pair (actuator, name). +# +def build_actuator(descr): + namelist = getattrlist(descr, 'name') + if namelist: + # Assume it is a string + actuatorname = namelist[0][1:-1] + else: + actuatorname = '' + type = descr[0] + if type[:4] == 'pnl_': type = type[4:] + act = pnl.mkact(type) + act.downfunc = act.activefunc = act.upfunc = dummy_callback + # + assign_members(act, descr[1:], ['al', 'data', 'name'], '') + # + # Treat actuator-specific data + # + datalist = getattrlist(descr, 'data') + prefix = '' + if type[-4:] == 'puck': + prefix = 'puck_' + elif type == 'mouse': + prefix = 'mouse_' + assign_members(act, datalist, [], prefix) + # + return act, actuatorname + + +# Build all sub-actuators and add them to the super-actuator. +# The super-actuator must already have been added to the panel. +# Sub-actuators with defined names are added as members to the panel +# so they can be referenced as p.name. +# +# Note: I have no idea how panel.endgroup() works when applied +# to a sub-actuator. +# +def build_subactuators(panel, super_act, al): + # + # This is nearly the same loop as below in build_panel(), + # except a call is made to addsubact() instead of addact(). + # + for a in al: + act, name = build_actuator(a) + act.addsubact(super_act) + if name: + stmt = 'panel.' + name + ' = act' + if debug: print 'exec', stmt + exec stmt + '\n' + if is_endgroup(a): + panel.endgroup() + sub_al = getattrlist(a, 'al') + if sub_al: + build_subactuators(panel, act, sub_al) + # + # Fix the actuator to which whe just added subactuators. + # This can't hurt (I hope) and is needed for the scroll actuator. + # + super_act.fixact() + + +# Build a real panel from a panel definition. +# Return a panel object p, where for each named actuator a, p.name is a +# reference to a. +# +def build_panel(descr): + # + # Sanity check + # + if (not descr) or descr[0] <> 'panel': + raise panel_error, 'panel description must start with "panel"' + # + if debug: show_panel('', descr) + # + # Create an empty panel + # + panel = pnl.mkpanel() + # + # Assign panel attributes + # + assign_members(panel, descr[1:], ['al'], '') + # + # Look for actuator list + # + al = getattrlist(descr, 'al') + # + # The order in which actuators are created is important + # because of the endgroup() operator. + # Unfortunately the Panel Editor outputs the actuator list + # in reverse order, so we reverse it here. + # + al = reverse(al) + # + for a in al: + act, name = build_actuator(a) + act.addact(panel) + if name: + stmt = 'panel.' + name + ' = act' + exec stmt + '\n' + if is_endgroup(a): + panel.endgroup() + sub_al = getattrlist(a, 'al') + if sub_al: + build_subactuators(panel, act, sub_al) + # + return panel + + +# Wrapper around pnl.dopanel() which calls call-back functions. +# +def my_dopanel(): + # Extract only the first 4 elements to allow for future expansion + a, down, active, up = pnl.dopanel()[:4] + if down: + down.downfunc(down) + if active: + active.activefunc(active) + if up: + up.upfunc(up) + return a + + +# Create one or more panels from a description file (S-expressions) +# generated by the Panel Editor. +# +def defpanellist(file): + import panelparser + descrlist = panelparser.parse_file(open(file, 'r')) + panellist = [] + for descr in descrlist: + panellist.append(build_panel(descr)) + return panellist + + +# Import everything from built-in method pnl, so the user can always +# use panel.foo() instead of pnl.foo(). +# This gives *no* performance penalty once this module is imported. +# +from pnl import * # for export + +dopanel = my_dopanel # override pnl.dopanel diff --git a/Lib/plat-irix6/panelparser.py b/Lib/plat-irix6/panelparser.py new file mode 100644 index 0000000..1b069fa --- /dev/null +++ b/Lib/plat-irix6/panelparser.py @@ -0,0 +1,128 @@ +# Module 'parser' +# +# Parse S-expressions output by the Panel Editor +# (which is written in Scheme so it can't help writing S-expressions). +# +# See notes at end of file. + + +whitespace = ' \t\n' +operators = '()\'' +separators = operators + whitespace + ';' + '"' + + +# Tokenize a string. +# Return a list of tokens (strings). +# +def tokenize_string(s): + tokens = [] + while s: + c = s[:1] + if c in whitespace: + s = s[1:] + elif c == ';': + s = '' + elif c == '"': + n = len(s) + i = 1 + while i < n: + c = s[i] + i = i+1 + if c == '"': break + if c == '\\': i = i+1 + tokens.append(s[:i]) + s = s[i:] + elif c in operators: + tokens.append(c) + s = s[1:] + else: + n = len(s) + i = 1 + while i < n: + if s[i] in separators: break + i = i+1 + tokens.append(s[:i]) + s = s[i:] + return tokens + + +# Tokenize a whole file (given as file object, not as file name). +# Return a list of tokens (strings). +# +def tokenize_file(fp): + tokens = [] + while 1: + line = fp.readline() + if not line: break + tokens = tokens + tokenize_string(line) + return tokens + + +# Exception raised by parse_exr. +# +syntax_error = 'syntax error' + + +# Parse an S-expression. +# Input is a list of tokens as returned by tokenize_*(). +# Return a pair (expr, tokens) +# where expr is a list representing the s-expression, +# and tokens contains the remaining tokens. +# May raise syntax_error. +# +def parse_expr(tokens): + if (not tokens) or tokens[0] <> '(': + raise syntax_error, 'expected "("' + tokens = tokens[1:] + expr = [] + while 1: + if not tokens: + raise syntax_error, 'missing ")"' + if tokens[0] == ')': + return expr, tokens[1:] + elif tokens[0] == '(': + subexpr, tokens = parse_expr(tokens) + expr.append(subexpr) + else: + expr.append(tokens[0]) + tokens = tokens[1:] + + +# Parse a file (given as file object, not as file name). +# Return a list of parsed S-expressions found at the top level. +# +def parse_file(fp): + tokens = tokenize_file(fp) + exprlist = [] + while tokens: + expr, tokens = parse_expr(tokens) + exprlist.append(expr) + return exprlist + + +# EXAMPLE: +# +# The input +# '(hip (hop hur-ray))' +# +# passed to tokenize_string() returns the token list +# ['(', 'hip', '(', 'hop', 'hur-ray', ')', ')'] +# +# When this is passed to parse_expr() it returns the expression +# ['hip', ['hop', 'hur-ray']] +# plus an empty token list (because there are no tokens left. +# +# When a file containing the example is passed to parse_file() it returns +# a list whose only element is the output of parse_expr() above: +# [['hip', ['hop', 'hur-ray']]] + + +# TOKENIZING: +# +# Comments start with semicolon (;) and continue till the end of the line. +# +# Tokens are separated by whitespace, except the following characters +# always form a separate token (outside strings): +# ( ) ' +# Strings are enclosed in double quotes (") and backslash (\) is used +# as escape character in strings. diff --git a/Lib/plat-irix6/readcd.doc b/Lib/plat-irix6/readcd.doc new file mode 100644 index 0000000..1be549c --- /dev/null +++ b/Lib/plat-irix6/readcd.doc @@ -0,0 +1,104 @@ +Interface to CD-ROM player. + +This module implements an interface to the built-in cd module. The +intention is to provide a more user-friendly interface than the +built-in module. + +The module defines a class Readcd with several methods. The +initialization of the class will try to open the CD player. This +means that initialization will fail if the CD player is already in +use. A RuntimeError will be raised by the cd module in that case. + +The way to work with this module is as follows. The user specifies +the parts of the CD that are to be read and he specifies callback +functions which are to be called by the system. At some point he can +tell the system to play. The specified parts of the CD will then be +read and the callbacks will be called. + +Initialization. +=============== + +r = readcd.Readcd([cd-player [, mode]]) + +The optional arguments are the name of the CD device and the mode. +When "mode" is not specified, it defaults to 'r' (which is the only +possible value); when "cd-player" also isn't specified, it defaults +to "None" which indicates the default CD player. + +Methods. +======== + +eject() -- Eject the CD from the player. + +reset() -- Reset the list of data stretches to be played. + +appendtrack(track) -- Append the specified track to the list of music +stretches. + +appendstretch(first, last) -- Append the stretch from "first" to "last" +to the list of music stretches. Both "first" and "last" can be in one +of four forms. "None": for "first", the beginning of the CD, for +"last" the end of the CD; a single integer: a track number--playing +starts at the beginning of the track or ends at the end of the +specified track; a three-tuple: the absolute time from the start of +the CD in minutes, seconds, frames; a four-tuple: track number and +relative time within the track in minutes, seconds, frames. + +settracks(tracklist) -- The argument is a list of integers. The list +of stretches is set to argument list. The old list is discarded. + +setcallback(type, func, arg) -- Set a callback function for "type". +The function will be called as func(arg, type, data) where "arg" is +the third argument of setcallback, "type" is the type of callback, +"data" is type-dependent data. See the CDsetcallback(3) manual page +for more information. The possible "type" arguments are defined in +the CD module. + +removecallback(type) -- Remove the callback for "type". + +gettrackinfo([tracklist]) -- Return a list of tuples. Each tuple +consists of start and length information of a track. The start and +length information consist of three-tuples with minutes, seconds and +frames. The optional tracklist argument gives a list of interesting +track numbers. If no tracklist is specified, information about all +tracks is returned. + +getstatus() -- Return the status information of the CD. + +play() -- Play the preprogrammed stretches of music from the CD. When +nothing was programmed, the whole CD is played. + +Specifying stretches. +===================== + +There are three methods available to specify a stretch of music to be +played. The easiest way is to use "settracklist(tracklist)" with which +a list of tracks can be specified. "settracklist(tracklist)" is +equivalent to the sequence + reset() + for track in tracklist: + appendtrack(track) + +The next method is "appendtrack(track)" with which a whole track can be +added to the list of music to be played. "appendtrack(track)" is +equivalent to "appendstretch(track, track)". + +The most complete method is "appendstretch(first, last)". Using this +method, it is possible to specify any stretch of music. + +When two consecutive tracks are played, it is possible to choose +whether the pause that may be between the tracks is played as well or +whether the pause should be skipped. When the end of a stretch is +specified using a track number and the next stretch starts at the +beginning of the following track and that was also specified using the +track number (that is, both were specified as integers, not as tuples), +the pause is played. When either value was specified using absolute +time or track-relative time (that is, as three-tuple or as +four-tuple), the pause will not be played. + +Errors. +======= + +When an error occurs, an exception will be raised. Depending on where +the error occurs, the exception may either be "readcd.Error" or +"RuntimeError". diff --git a/Lib/plat-irix6/readcd.py b/Lib/plat-irix6/readcd.py new file mode 100644 index 0000000..5c4b824 --- /dev/null +++ b/Lib/plat-irix6/readcd.py @@ -0,0 +1,242 @@ +# Class interface to the CD module. + +import cd, CD + +Error = 'Readcd.Error' +_Stop = 'Readcd.Stop' + +def _doatime(self, cb_type, data): + if ((data[0] * 60) + data[1]) * 75 + data[2] > self.end: +## print 'done with list entry',`self.listindex` + raise _Stop + func, arg = self.callbacks[cb_type] + if func: + func(arg, cb_type, data) + +def _dopnum(self, cb_type, data): + if data > self.end: +## print 'done with list entry',`self.listindex` + raise _Stop + func, arg = self.callbacks[cb_type] + if func: + func(arg, cb_type, data) + +class Readcd: + def __init__(self, *arg): + if len(arg) == 0: + self.player = cd.open() + elif len(arg) == 1: + self.player = cd.open(arg[0]) + elif len(arg) == 2: + self.player = cd.open(arg[0], arg[1]) + else: + raise Error, 'bad __init__ call' + self.list = [] + self.callbacks = [(None, None)] * 8 + self.parser = cd.createparser() + self.playing = 0 + self.end = 0 + self.status = None + self.trackinfo = None + + def eject(self): + self.player.eject() + self.list = [] + self.end = 0 + self.listindex = 0 + self.status = None + self.trackinfo = None + if self.playing: +## print 'stop playing from eject' + raise _Stop + + def pmsf2msf(self, track, min, sec, frame): + if not self.status: + self.cachestatus() + if track < self.status[5] or track > self.status[6]: + raise Error, 'track number out of range' + if not self.trackinfo: + self.cacheinfo() + start, total = self.trackinfo[track] + start = ((start[0] * 60) + start[1]) * 75 + start[2] + total = ((total[0] * 60) + total[1]) * 75 + total[2] + block = ((min * 60) + sec) * 75 + frame + if block > total: + raise Error, 'out of range' + block = start + block + min, block = divmod(block, 75*60) + sec, frame = divmod(block, 75) + return min, sec, frame + + def reset(self): + self.list = [] + + def appendtrack(self, track): + self.appendstretch(track, track) + + def appendstretch(self, start, end): + if not self.status: + self.cachestatus() + if not start: + start = 1 + if not end: + end = self.status[6] + if type(end) == type(0): + if end < self.status[5] or end > self.status[6]: + raise Error, 'range error' + else: + l = len(end) + if l == 4: + prog, min, sec, frame = end + if prog < self.status[5] or prog > self.status[6]: + raise Error, 'range error' + end = self.pmsf2msf(prog, min, sec, frame) + elif l <> 3: + raise Error, 'syntax error' + if type(start) == type(0): + if start < self.status[5] or start > self.status[6]: + raise Error, 'range error' + if len(self.list) > 0: + s, e = self.list[-1] + if type(e) == type(0): + if start == e+1: + start = s + del self.list[-1] + else: + l = len(start) + if l == 4: + prog, min, sec, frame = start + if prog < self.status[5] or prog > self.status[6]: + raise Error, 'range error' + start = self.pmsf2msf(prog, min, sec, frame) + elif l <> 3: + raise Error, 'syntax error' + self.list.append((start, end)) + + def settracks(self, list): + self.list = [] + for track in list: + self.appendtrack(track) + + def setcallback(self, cb_type, func, arg): + if cb_type < 0 or cb_type >= 8: + raise Error, 'type out of range' + self.callbacks[cb_type] = (func, arg) + if self.playing: + start, end = self.list[self.listindex] + if type(end) == type(0): + if cb_type <> CD.PNUM: + self.parser.setcallback(cb_type, func, arg) + else: + if cb_type <> CD.ATIME: + self.parser.setcallback(cb_type, func, arg) + + def removecallback(self, cb_type): + if cb_type < 0 or cb_type >= 8: + raise Error, 'type out of range' + self.callbacks[cb_type] = (None, None) + if self.playing: + start, end = self.list[self.listindex] + if type(end) == type(0): + if cb_type <> CD.PNUM: + self.parser.removecallback(cb_type) + else: + if cb_type <> CD.ATIME: + self.parser.removecallback(cb_type) + + def gettrackinfo(self, *arg): + if not self.status: + self.cachestatus() + if not self.trackinfo: + self.cacheinfo() + if len(arg) == 0: + return self.trackinfo[self.status[5]:self.status[6]+1] + result = [] + for i in arg: + if i < self.status[5] or i > self.status[6]: + raise Error, 'range error' + result.append(self.trackinfo[i]) + return result + + def cacheinfo(self): + if not self.status: + self.cachestatus() + self.trackinfo = [] + for i in range(self.status[5]): + self.trackinfo.append(None) + for i in range(self.status[5], self.status[6]+1): + self.trackinfo.append(self.player.gettrackinfo(i)) + + def cachestatus(self): + self.status = self.player.getstatus() + if self.status[0] == CD.NODISC: + self.status = None + raise Error, 'no disc in player' + + def getstatus(self): + return self.player.getstatus() + + def play(self): + if not self.status: + self.cachestatus() + size = self.player.bestreadsize() + self.listindex = 0 + self.playing = 0 + for i in range(8): + func, arg = self.callbacks[i] + if func: + self.parser.setcallback(i, func, arg) + else: + self.parser.removecallback(i) + if len(self.list) == 0: + for i in range(self.status[5], self.status[6]+1): + self.appendtrack(i) + try: + while 1: + if not self.playing: + if self.listindex >= len(self.list): + return + start, end = self.list[self.listindex] + if type(start) == type(0): + dummy = self.player.seektrack( + start) + else: + min, sec, frame = start + dummy = self.player.seek( + min, sec, frame) + if type(end) == type(0): + self.parser.setcallback( + CD.PNUM, _dopnum, self) + self.end = end + func, arg = \ + self.callbacks[CD.ATIME] + if func: + self.parser.setcallback(CD.ATIME, func, arg) + else: + self.parser.removecallback(CD.ATIME) + else: + min, sec, frame = end + self.parser.setcallback( + CD.ATIME, _doatime, + self) + self.end = (min * 60 + sec) * \ + 75 + frame + func, arg = \ + self.callbacks[CD.PNUM] + if func: + self.parser.setcallback(CD.PNUM, func, arg) + else: + self.parser.removecallback(CD.PNUM) + self.playing = 1 + data = self.player.readda(size) + if data == '': + self.playing = 0 + self.listindex = self.listindex + 1 + continue + try: + self.parser.parseframe(data) + except _Stop: + self.playing = 0 + self.listindex = self.listindex + 1 + finally: + self.playing = 0 diff --git a/Lib/plat-irix6/regen b/Lib/plat-irix6/regen new file mode 100755 index 0000000..4c4ea5c --- /dev/null +++ b/Lib/plat-irix6/regen @@ -0,0 +1,13 @@ +#! /bin/sh +case `uname -sr` in +'IRIX '[45].*) ;; +*) echo Probably not on an IRIX system 1>&2 + exit 1;; +esac +set -v +h2py /usr/include/sys/fcntl.h +h2py /usr/include/sys/file.h +h2py /usr/include/sys/socket.h +h2py -i '(u_long)' /usr/include/netinet/in.h +h2py /usr/include/sys/termios.h +h2py /usr/include/errno.h diff --git a/Lib/plat-irix6/torgb.py b/Lib/plat-irix6/torgb.py new file mode 100644 index 0000000..f283063 --- /dev/null +++ b/Lib/plat-irix6/torgb.py @@ -0,0 +1,97 @@ +# Convert "arbitrary" image files to rgb files (SGI's image format). +# Input may be compressed. +# The uncompressed file type may be PBM, PGM, PPM, GIF, TIFF, or Sun raster. +# An exception is raised if the file is not of a recognized type. +# Returned filename is either the input filename or a temporary filename; +# in the latter case the caller must ensure that it is removed. +# Other temporary files used are removed by the function. + +import os +import tempfile +import pipes +import imghdr + +table = {} + +t = pipes.Template() +t.append('fromppm $IN $OUT', 'ff') +table['ppm'] = t + +t = pipes.Template() +t.append('(PATH=$PATH:/ufs/guido/bin/sgi; exec pnmtoppm)', '--') +t.append('fromppm $IN $OUT', 'ff') +table['pnm'] = t +table['pgm'] = t +table['pbm'] = t + +t = pipes.Template() +t.append('fromgif $IN $OUT', 'ff') +table['gif'] = t + +t = pipes.Template() +t.append('tifftopnm', '--') +t.append('(PATH=$PATH:/ufs/guido/bin/sgi; exec pnmtoppm)', '--') +t.append('fromppm $IN $OUT', 'ff') +table['tiff'] = t + +t = pipes.Template() +t.append('rasttopnm', '--') +t.append('(PATH=$PATH:/ufs/guido/bin/sgi; exec pnmtoppm)', '--') +t.append('fromppm $IN $OUT', 'ff') +table['rast'] = t + +t = pipes.Template() +t.append('djpeg', '--') +t.append('(PATH=$PATH:/ufs/guido/bin/sgi; exec pnmtoppm)', '--') +t.append('fromppm $IN $OUT', 'ff') +table['jpeg'] = t + +uncompress = pipes.Template() +uncompress.append('uncompress', '--') + + +error = 'torgb.error' # Exception + +def torgb(filename): + temps = [] + ret = None + try: + ret = _torgb(filename, temps) + finally: + for temp in temps[:]: + if temp <> ret: + try: + os.unlink(temp) + except os.error: + pass + temps.remove(temp) + return ret + +def _torgb(filename, temps): + if filename[-2:] == '.Z': + fname = tempfile.mktemp() + temps.append(fname) + sts = uncompress.copy(filename, fname) + if sts: + raise error, filename + ': uncompress failed' + else: + fname = filename + try: + ftype = imghdr.what(fname) + except IOError, msg: + if type(msg) == type(()) and len(msg) == 2 and \ + type(msg[0]) == type(0) and type(msg[1]) == type(''): + msg = msg[1] + if type(msg) <> type(''): + msg = `msg` + raise error, filename + ': ' + msg + if ftype == 'rgb': + return fname + if ftype == None or not table.has_key(ftype): + raise error, \ + filename + ': unsupported image file type ' + `ftype` + temp = tempfile.mktemp() + sts = table[ftype].copy(fname, temp) + if sts: + raise error, filename + ': conversion to rgb failed' + return temp |