diff options
29 files changed, 1040 insertions, 1037 deletions
@@ -40,6 +40,9 @@ Lib/venv/scripts/nt/* = BIN Lib/test/coding20731.py = BIN +# Windows batch files work best with CRLF, there can be subtle problems with LF +**.bat = CRLF + # All other files (which presumably are human-editable) are "native". # This must be the last rule! diff --git a/Doc/make.bat b/Doc/make.bat index 6aae34a..3ff91f2 100644 --- a/Doc/make.bat +++ b/Doc/make.bat @@ -1,133 +1,133 @@ -@echo off -setlocal - -pushd %~dp0 - -set this=%~n0 - -if "%SPHINXBUILD%" EQU "" set SPHINXBUILD=sphinx-build -if "%PYTHON%" EQU "" set PYTHON=py - -if "%1" NEQ "htmlhelp" goto :skiphhcsearch -if exist "%HTMLHELP%" goto :skiphhcsearch - -rem Search for HHC in likely places -set HTMLHELP= -where hhc /q && set HTMLHELP=hhc && goto :skiphhcsearch -where /R ..\externals hhc > "%TEMP%\hhc.loc" 2> nul && set /P HTMLHELP= < "%TEMP%\hhc.loc" & del "%TEMP%\hhc.loc" -if not exist "%HTMLHELP%" where /R "%ProgramFiles(x86)%" hhc > "%TEMP%\hhc.loc" 2> nul && set /P HTMLHELP= < "%TEMP%\hhc.loc" & del "%TEMP%\hhc.loc" -if not exist "%HTMLHELP%" where /R "%ProgramFiles%" hhc > "%TEMP%\hhc.loc" 2> nul && set /P HTMLHELP= < "%TEMP%\hhc.loc" & del "%TEMP%\hhc.loc" -if not exist "%HTMLHELP%" echo Cannot find HHC on PATH or in externals & exit /B 1 -:skiphhcsearch - -if "%DISTVERSION%" EQU "" for /f "usebackq" %%v in (`%PYTHON% tools/extensions/patchlevel.py`) do set DISTVERSION=%%v - -if "%BUILDDIR%" EQU "" set BUILDDIR=build - -rem Targets that don't require sphinx-build -if "%1" EQU "" goto help -if "%1" EQU "help" goto help -if "%1" EQU "check" goto check -if "%1" EQU "serve" goto serve -if "%1" == "clean" ( - rmdir /q /s %BUILDDIR% - goto end -) - -%SPHINXBUILD% 2> nul -if errorlevel 9009 ( - echo. - echo.The 'sphinx-build' command was not found. Make sure you have Sphinx - echo.installed, then set the SPHINXBUILD environment variable to point - echo.to the full path of the 'sphinx-build' executable. Alternatively you - echo.may add the Sphinx directory to PATH. - echo. - echo.If you don't have Sphinx installed, grab it from - echo.http://sphinx-doc.org/ - popd - exit /B 1 -) - -rem Targets that do require sphinx-build and have their own label -if "%1" EQU "htmlview" goto htmlview - -rem Everything else -goto build - -:help -echo.usage: %this% BUILDER [filename ...] -echo. -echo.Call %this% with the desired Sphinx builder as the first argument, e.g. -echo.``%this% html`` or ``%this% doctest``. Interesting targets that are -echo.always available include: -echo. -echo. Provided by Sphinx: -echo. html, htmlhelp, latex, text -echo. suspicious, linkcheck, changes, doctest -echo. Provided by this script: -echo. clean, check, serve, htmlview -echo. -echo.All arguments past the first one are passed through to sphinx-build as -echo.filenames to build or are ignored. See README.txt in this directory or -echo.the documentation for your version of Sphinx for more exhaustive lists -echo.of available targets and descriptions of each. -echo. -echo.This script assumes that the SPHINXBUILD environment variable contains -echo.a legitimate command for calling sphinx-build, or that sphinx-build is -echo.on your PATH if SPHINXBUILD is not set. Options for sphinx-build can -echo.be passed by setting the SPHINXOPTS environment variable. -goto end - -:build -if NOT "%PAPER%" == "" ( - set SPHINXOPTS=-D latex_paper_size=%PAPER% %SPHINXOPTS% -) -cmd /C %SPHINXBUILD% %SPHINXOPTS% -b%1 -dbuild\doctrees . %BUILDDIR%\%* - -if "%1" EQU "htmlhelp" ( - if not exist "%HTMLHELP%" ( - echo. - echo.The HTML Help Workshop was not found. Set the HTMLHELP variable - echo.to the path to hhc.exe or download and install it from - echo.http://msdn.microsoft.com/en-us/library/ms669985 - rem Set errorlevel to 1 and exit - cmd /C exit /b 1 - goto end - ) - cmd /C "%HTMLHELP%" build\htmlhelp\python%DISTVERSION:.=%.hhp - rem hhc.exe seems to always exit with code 1, reset to 0 for less than 2 - if not errorlevel 2 cmd /C exit /b 0 -) - -echo. -if errorlevel 1 ( - echo.Build failed (exit code %ERRORLEVEL%^), check for error messages - echo.above. Any output will be found in %BUILDDIR%\%1 -) else ( - echo.Build succeeded. All output should be in %BUILDDIR%\%1 -) -goto end - -:htmlview -if NOT "%2" EQU "" ( - echo.Can't specify filenames to build with htmlview target, ignoring. -) -cmd /C %this% html - -if EXIST %BUILDDIR%\html\index.html ( - echo.Opening %BUILDDIR%\html\index.html in the default web browser... - start %BUILDDIR%\html\index.html -) - -goto end - -:check -cmd /C %PYTHON% tools\rstlint.py -i tools -goto end - -:serve -cmd /C %PYTHON% ..\Tools\scripts\serve.py %BUILDDIR%\html -goto end - -:end -popd +@echo off
+setlocal
+
+pushd %~dp0
+
+set this=%~n0
+
+if "%SPHINXBUILD%" EQU "" set SPHINXBUILD=sphinx-build
+if "%PYTHON%" EQU "" set PYTHON=py
+
+if "%1" NEQ "htmlhelp" goto :skiphhcsearch
+if exist "%HTMLHELP%" goto :skiphhcsearch
+
+rem Search for HHC in likely places
+set HTMLHELP=
+where hhc /q && set HTMLHELP=hhc && goto :skiphhcsearch
+where /R ..\externals hhc > "%TEMP%\hhc.loc" 2> nul && set /P HTMLHELP= < "%TEMP%\hhc.loc" & del "%TEMP%\hhc.loc"
+if not exist "%HTMLHELP%" where /R "%ProgramFiles(x86)%" hhc > "%TEMP%\hhc.loc" 2> nul && set /P HTMLHELP= < "%TEMP%\hhc.loc" & del "%TEMP%\hhc.loc"
+if not exist "%HTMLHELP%" where /R "%ProgramFiles%" hhc > "%TEMP%\hhc.loc" 2> nul && set /P HTMLHELP= < "%TEMP%\hhc.loc" & del "%TEMP%\hhc.loc"
+if not exist "%HTMLHELP%" echo Cannot find HHC on PATH or in externals & exit /B 1
+:skiphhcsearch
+
+if "%DISTVERSION%" EQU "" for /f "usebackq" %%v in (`%PYTHON% tools/extensions/patchlevel.py`) do set DISTVERSION=%%v
+
+if "%BUILDDIR%" EQU "" set BUILDDIR=build
+
+rem Targets that don't require sphinx-build
+if "%1" EQU "" goto help
+if "%1" EQU "help" goto help
+if "%1" EQU "check" goto check
+if "%1" EQU "serve" goto serve
+if "%1" == "clean" (
+ rmdir /q /s %BUILDDIR%
+ goto end
+)
+
+%SPHINXBUILD% 2> nul
+if errorlevel 9009 (
+ echo.
+ echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+ echo.installed, then set the SPHINXBUILD environment variable to point
+ echo.to the full path of the 'sphinx-build' executable. Alternatively you
+ echo.may add the Sphinx directory to PATH.
+ echo.
+ echo.If you don't have Sphinx installed, grab it from
+ echo.http://sphinx-doc.org/
+ popd
+ exit /B 1
+)
+
+rem Targets that do require sphinx-build and have their own label
+if "%1" EQU "htmlview" goto htmlview
+
+rem Everything else
+goto build
+
+:help
+echo.usage: %this% BUILDER [filename ...]
+echo.
+echo.Call %this% with the desired Sphinx builder as the first argument, e.g.
+echo.``%this% html`` or ``%this% doctest``. Interesting targets that are
+echo.always available include:
+echo.
+echo. Provided by Sphinx:
+echo. html, htmlhelp, latex, text
+echo. suspicious, linkcheck, changes, doctest
+echo. Provided by this script:
+echo. clean, check, serve, htmlview
+echo.
+echo.All arguments past the first one are passed through to sphinx-build as
+echo.filenames to build or are ignored. See README.txt in this directory or
+echo.the documentation for your version of Sphinx for more exhaustive lists
+echo.of available targets and descriptions of each.
+echo.
+echo.This script assumes that the SPHINXBUILD environment variable contains
+echo.a legitimate command for calling sphinx-build, or that sphinx-build is
+echo.on your PATH if SPHINXBUILD is not set. Options for sphinx-build can
+echo.be passed by setting the SPHINXOPTS environment variable.
+goto end
+
+:build
+if NOT "%PAPER%" == "" (
+ set SPHINXOPTS=-D latex_paper_size=%PAPER% %SPHINXOPTS%
+)
+cmd /C %SPHINXBUILD% %SPHINXOPTS% -b%1 -dbuild\doctrees . %BUILDDIR%\%*
+
+if "%1" EQU "htmlhelp" (
+ if not exist "%HTMLHELP%" (
+ echo.
+ echo.The HTML Help Workshop was not found. Set the HTMLHELP variable
+ echo.to the path to hhc.exe or download and install it from
+ echo.http://msdn.microsoft.com/en-us/library/ms669985
+ rem Set errorlevel to 1 and exit
+ cmd /C exit /b 1
+ goto end
+ )
+ cmd /C "%HTMLHELP%" build\htmlhelp\python%DISTVERSION:.=%.hhp
+ rem hhc.exe seems to always exit with code 1, reset to 0 for less than 2
+ if not errorlevel 2 cmd /C exit /b 0
+)
+
+echo.
+if errorlevel 1 (
+ echo.Build failed (exit code %ERRORLEVEL%^), check for error messages
+ echo.above. Any output will be found in %BUILDDIR%\%1
+) else (
+ echo.Build succeeded. All output should be in %BUILDDIR%\%1
+)
+goto end
+
+:htmlview
+if NOT "%2" EQU "" (
+ echo.Can't specify filenames to build with htmlview target, ignoring.
+)
+cmd /C %this% html
+
+if EXIST %BUILDDIR%\html\index.html (
+ echo.Opening %BUILDDIR%\html\index.html in the default web browser...
+ start %BUILDDIR%\html\index.html
+)
+
+goto end
+
+:check
+cmd /C %PYTHON% tools\rstlint.py -i tools
+goto end
+
+:serve
+cmd /C %PYTHON% ..\Tools\scripts\serve.py %BUILDDIR%\html
+goto end
+
+:end
+popd
diff --git a/Lib/ctypes/macholib/fetch_macholib.bat b/Lib/ctypes/macholib/fetch_macholib.bat index f9e1c0d..f474d5c 100644 --- a/Lib/ctypes/macholib/fetch_macholib.bat +++ b/Lib/ctypes/macholib/fetch_macholib.bat @@ -1 +1 @@ -svn export --force http://svn.red-bean.com/bob/macholib/trunk/macholib/ . +svn export --force http://svn.red-bean.com/bob/macholib/trunk/macholib/ .
diff --git a/Lib/idlelib/idle.bat b/Lib/idlelib/idle.bat index e77b96e..3d619a3 100755 --- a/Lib/idlelib/idle.bat +++ b/Lib/idlelib/idle.bat @@ -1,4 +1,4 @@ -@echo off -rem Start IDLE using the appropriate Python interpreter -set CURRDIR=%~dp0 -start "IDLE" "%CURRDIR%..\..\pythonw.exe" "%CURRDIR%idle.pyw" %1 %2 %3 %4 %5 %6 %7 %8 %9 +@echo off
+rem Start IDLE using the appropriate Python interpreter
+set CURRDIR=%~dp0
+start "IDLE" "%CURRDIR%..\..\pythonw.exe" "%CURRDIR%idle.pyw" %1 %2 %3 %4 %5 %6 %7 %8 %9
diff --git a/Modules/_decimal/tests/runall.bat b/Modules/_decimal/tests/runall.bat index 5bc872a..568f92f 100755 --- a/Modules/_decimal/tests/runall.bat +++ b/Modules/_decimal/tests/runall.bat @@ -1,111 +1,111 @@ -@ECHO OFF - -rem Test all machine configurations, pydebug, refleaks, release build. - -cd ..\..\..\ - - -echo. -echo # ====================================================================== -echo # Building Python -echo # ====================================================================== -echo. - -call "%VS100COMNTOOLS%\..\..\VC\vcvarsall.bat" x64 -msbuild /noconsolelogger /target:clean PCbuild\pcbuild.sln /p:Configuration=Release /p:PlatformTarget=x64 -msbuild /noconsolelogger /target:clean PCbuild\pcbuild.sln /p:Configuration=Debug /p:PlatformTarget=x64 -msbuild /noconsolelogger PCbuild\pcbuild.sln /p:Configuration=Release /p:Platform=x64 -msbuild /noconsolelogger PCbuild\pcbuild.sln /p:Configuration=Debug /p:Platform=x64 - -call "%VS100COMNTOOLS%\..\..\VC\vcvarsall.bat" x86 -msbuild /noconsolelogger PCbuild\pcbuild.sln /p:Configuration=Release /p:Platform=Win32 -msbuild /noconsolelogger PCbuild\pcbuild.sln /p:Configuration=Debug /p:Platform=Win32 -echo. -echo. - -echo. -echo # ====================================================================== -echo # test_decimal: platform=x64 -echo # ====================================================================== -echo. - -cd PCbuild\amd64 - -echo # ==================== refleak tests ======================= -echo. -python_d.exe -m test -uall -R 2:2 test_decimal -echo. -echo. - -echo # ==================== regular tests ======================= -echo. -python.exe -m test -uall test_decimal -echo. -echo. - -cd .. - -echo. -echo # ====================================================================== -echo # test_decimal: platform=x86 -echo # ====================================================================== -echo. - -echo # ==================== refleak tests ======================= -echo. -python_d.exe -m test -uall -R 2:2 test_decimal -echo. -echo. - -echo # ==================== regular tests ======================= -echo. -python.exe -m test -uall test_decimal -echo. -echo. - -cd amd64 - -echo. -echo # ====================================================================== -echo # deccheck: platform=x64 -echo # ====================================================================== -echo. - -echo # ==================== debug build ======================= -echo. -python_d.exe ..\..\Modules\_decimal\tests\deccheck.py -echo. -echo. - -echo # =================== release build ====================== -echo. -python.exe ..\..\Modules\_decimal\tests\deccheck.py -echo. -echo. - -cd .. - -echo. -echo # ====================================================================== -echo # deccheck: platform=x86 -echo # ====================================================================== -echo. -echo. - -echo # ==================== debug build ======================= -echo. -python_d.exe ..\Modules\_decimal\tests\deccheck.py -echo. -echo. - -echo # =================== release build ====================== -echo. -python.exe ..\Modules\_decimal\tests\deccheck.py -echo. -echo. - - -cd ..\Modules\_decimal\tests - - - +@ECHO OFF
+
+rem Test all machine configurations, pydebug, refleaks, release build.
+
+cd ..\..\..\
+
+
+echo.
+echo # ======================================================================
+echo # Building Python
+echo # ======================================================================
+echo.
+
+call "%VS100COMNTOOLS%\..\..\VC\vcvarsall.bat" x64
+msbuild /noconsolelogger /target:clean PCbuild\pcbuild.sln /p:Configuration=Release /p:PlatformTarget=x64
+msbuild /noconsolelogger /target:clean PCbuild\pcbuild.sln /p:Configuration=Debug /p:PlatformTarget=x64
+msbuild /noconsolelogger PCbuild\pcbuild.sln /p:Configuration=Release /p:Platform=x64
+msbuild /noconsolelogger PCbuild\pcbuild.sln /p:Configuration=Debug /p:Platform=x64
+
+call "%VS100COMNTOOLS%\..\..\VC\vcvarsall.bat" x86
+msbuild /noconsolelogger PCbuild\pcbuild.sln /p:Configuration=Release /p:Platform=Win32
+msbuild /noconsolelogger PCbuild\pcbuild.sln /p:Configuration=Debug /p:Platform=Win32
+echo.
+echo.
+
+echo.
+echo # ======================================================================
+echo # test_decimal: platform=x64
+echo # ======================================================================
+echo.
+
+cd PCbuild\amd64
+
+echo # ==================== refleak tests =======================
+echo.
+python_d.exe -m test -uall -R 2:2 test_decimal
+echo.
+echo.
+
+echo # ==================== regular tests =======================
+echo.
+python.exe -m test -uall test_decimal
+echo.
+echo.
+
+cd ..
+
+echo.
+echo # ======================================================================
+echo # test_decimal: platform=x86
+echo # ======================================================================
+echo.
+
+echo # ==================== refleak tests =======================
+echo.
+python_d.exe -m test -uall -R 2:2 test_decimal
+echo.
+echo.
+
+echo # ==================== regular tests =======================
+echo.
+python.exe -m test -uall test_decimal
+echo.
+echo.
+
+cd amd64
+
+echo.
+echo # ======================================================================
+echo # deccheck: platform=x64
+echo # ======================================================================
+echo.
+
+echo # ==================== debug build =======================
+echo.
+python_d.exe ..\..\Modules\_decimal\tests\deccheck.py
+echo.
+echo.
+
+echo # =================== release build ======================
+echo.
+python.exe ..\..\Modules\_decimal\tests\deccheck.py
+echo.
+echo.
+
+cd ..
+
+echo.
+echo # ======================================================================
+echo # deccheck: platform=x86
+echo # ======================================================================
+echo.
+echo.
+
+echo # ==================== debug build =======================
+echo.
+python_d.exe ..\Modules\_decimal\tests\deccheck.py
+echo.
+echo.
+
+echo # =================== release build ======================
+echo.
+python.exe ..\Modules\_decimal\tests\deccheck.py
+echo.
+echo.
+
+
+cd ..\Modules\_decimal\tests
+
+
+
diff --git a/PC/bdist_wininst/build.bat b/PC/bdist_wininst/build.bat index ee68567..25f565c 100644 --- a/PC/bdist_wininst/build.bat +++ b/PC/bdist_wininst/build.bat @@ -1,22 +1,22 @@ -@echo off -setlocal - -set D=%~dp0 -set PCBUILD=%~dp0..\..\PCBuild\ - - -echo Building Lib\distutils\command\wininst-xx.0.exe - -call "%PCBUILD%env.bat" x86 -if errorlevel 1 goto :eof - -msbuild "%D%bdist_wininst.vcxproj" "/p:SolutionDir=%PCBUILD%\" /p:Configuration=Release /p:Platform=Win32 -if errorlevel 1 goto :eof - - -echo Building Lib\distutils\command\wininst-xx.0-amd64.exe - -call "%PCBUILD%env.bat" x86_amd64 -if errorlevel 1 goto :eof - -msbuild "%D%bdist_wininst.vcxproj" "/p:SolutionDir=%PCBUILD%\" /p:Configuration=Release /p:Platform=x64 +@echo off
+setlocal
+
+set D=%~dp0
+set PCBUILD=%~dp0..\..\PCBuild\
+
+
+echo Building Lib\distutils\command\wininst-xx.0.exe
+
+call "%PCBUILD%env.bat" x86
+if errorlevel 1 goto :eof
+
+msbuild "%D%bdist_wininst.vcxproj" "/p:SolutionDir=%PCBUILD%\" /p:Configuration=Release /p:Platform=Win32
+if errorlevel 1 goto :eof
+
+
+echo Building Lib\distutils\command\wininst-xx.0-amd64.exe
+
+call "%PCBUILD%env.bat" x86_amd64
+if errorlevel 1 goto :eof
+
+msbuild "%D%bdist_wininst.vcxproj" "/p:SolutionDir=%PCBUILD%\" /p:Configuration=Release /p:Platform=x64
diff --git a/PCbuild/build.bat b/PCbuild/build.bat index 2846144..fa9f403 100644 --- a/PCbuild/build.bat +++ b/PCbuild/build.bat @@ -1,43 +1,43 @@ -@echo off -rem A batch program to build or rebuild a particular configuration, -rem just for convenience. - -rem Arguments: -rem -c Set the configuration (default: Release) -rem -p Set the platform (x64 or Win32, default: Win32) -rem -r Target Rebuild instead of Build -rem -t Set the target manually (Build, Rebuild, Clean, or CleanAll) -rem -d Set the configuration to Debug -rem -e Pull in external libraries using get_externals.bat -rem -M Disable parallel build -rem -v Increased output messages - -setlocal -set platf=Win32 -set vs_platf=x86 -set conf=Release -set target=Build -set dir=%~dp0 -set parallel=/m -set verbose=/nologo /v:m - -:CheckOpts -if '%1'=='-c' (set conf=%2) & shift & shift & goto CheckOpts -if '%1'=='-p' (set platf=%2) & shift & shift & goto CheckOpts -if '%1'=='-r' (set target=Rebuild) & shift & goto CheckOpts -if '%1'=='-t' (set target=%2) & shift & shift & goto CheckOpts -if '%1'=='-d' (set conf=Debug) & shift & goto CheckOpts -if '%1'=='-e' call "%dir%get_externals.bat" & shift & goto CheckOpts -if '%1'=='-M' (set parallel=) & shift & goto CheckOpts -if '%1'=='-v' (set verbose=/v:n) & shift & goto CheckOpts - -if '%platf%'=='x64' (set vs_platf=x86_amd64) - -rem Setup the environment -call "%dir%env.bat" %vs_platf% >nul - -rem Call on MSBuild to do the work, echo the command. -rem Passing %1-9 is not the preferred option, but argument parsing in -rem batch is, shall we say, "lackluster" -echo on -msbuild "%dir%pcbuild.proj" /t:%target% %parallel% %verbose% /p:Configuration=%conf% /p:Platform=%platf% %1 %2 %3 %4 %5 %6 %7 %8 %9 +@echo off
+rem A batch program to build or rebuild a particular configuration,
+rem just for convenience.
+
+rem Arguments:
+rem -c Set the configuration (default: Release)
+rem -p Set the platform (x64 or Win32, default: Win32)
+rem -r Target Rebuild instead of Build
+rem -t Set the target manually (Build, Rebuild, Clean, or CleanAll)
+rem -d Set the configuration to Debug
+rem -e Pull in external libraries using get_externals.bat
+rem -M Disable parallel build
+rem -v Increased output messages
+
+setlocal
+set platf=Win32
+set vs_platf=x86
+set conf=Release
+set target=Build
+set dir=%~dp0
+set parallel=/m
+set verbose=/nologo /v:m
+
+:CheckOpts
+if '%1'=='-c' (set conf=%2) & shift & shift & goto CheckOpts
+if '%1'=='-p' (set platf=%2) & shift & shift & goto CheckOpts
+if '%1'=='-r' (set target=Rebuild) & shift & goto CheckOpts
+if '%1'=='-t' (set target=%2) & shift & shift & goto CheckOpts
+if '%1'=='-d' (set conf=Debug) & shift & goto CheckOpts
+if '%1'=='-e' call "%dir%get_externals.bat" & shift & goto CheckOpts
+if '%1'=='-M' (set parallel=) & shift & goto CheckOpts
+if '%1'=='-v' (set verbose=/v:n) & shift & goto CheckOpts
+
+if '%platf%'=='x64' (set vs_platf=x86_amd64)
+
+rem Setup the environment
+call "%dir%env.bat" %vs_platf% >nul
+
+rem Call on MSBuild to do the work, echo the command.
+rem Passing %1-9 is not the preferred option, but argument parsing in
+rem batch is, shall we say, "lackluster"
+echo on
+msbuild "%dir%pcbuild.proj" /t:%target% %parallel% %verbose% /p:Configuration=%conf% /p:Platform=%platf% %1 %2 %3 %4 %5 %6 %7 %8 %9
diff --git a/PCbuild/build_env.bat b/PCbuild/build_env.bat index 4c67ae3..01024cf 100644 --- a/PCbuild/build_env.bat +++ b/PCbuild/build_env.bat @@ -1 +1 @@ -@%comspec% /k env.bat %* +@%comspec% /k env.bat %*
diff --git a/PCbuild/build_pgo.bat b/PCbuild/build_pgo.bat index 5988c0a..79ec267 100644 --- a/PCbuild/build_pgo.bat +++ b/PCbuild/build_pgo.bat @@ -1,48 +1,48 @@ -@echo off -rem A batch program to build PGO (Profile guided optimization) by first -rem building instrumented binaries, then running the testsuite, and -rem finally building the optimized code. -rem Note, after the first instrumented run, one can just keep on -rem building the PGUpdate configuration while developing. - -setlocal -set platf=Win32 -set parallel=/m -set dir=%~dp0 - -rem use the performance testsuite. This is quick and simple -set job1="%dir%..\tools\pybench\pybench.py" -n 1 -C 1 --with-gc -set path1="%dir%..\tools\pybench" - -rem or the whole testsuite for more thorough testing -set job2="%dir%..\lib\test\regrtest.py" -set path2="%dir%..\lib" - -set job=%job1% -set clrpath=%path1% - -:CheckOpts -if "%1"=="-p" (set platf=%2) & shift & shift & goto CheckOpts -if "%1"=="-2" (set job=%job2%) & (set clrpath=%path2%) & shift & goto CheckOpts -if "%1"=="-M" (set parallel=) & shift & goto CheckOpts - - -rem We cannot cross compile PGO builds, as the optimization needs to be run natively -set vs_platf=x86 -set PGO=%dir%win32-pgo - -if "%platf%"=="x64" (set vs_platf=amd64) & (set PGO=%dir%amd64-pgo) -rem Setup the environment -call "%dir%env.bat" %vs_platf% - - -rem build the instrumented version -msbuild "%dir%pcbuild.proj" %parallel% /t:Build /p:Configuration=PGInstrument /p:Platform=%platf% %1 %2 %3 %4 %5 %6 %7 %8 %9 - -rem remove .pyc files, .pgc files and execute the job -"%PGO%\python.exe" "%dir%rmpyc.py" %clrpath% -del "%PGO%\*.pgc" -"%PGO%\python.exe" %job% - -rem build optimized version -msbuild "%dir%pcbuild.proj" %parallel% /t:Build /p:Configuration=PGUpdate /p:Platform=%platf% %1 %2 %3 %4 %5 %6 %7 %8 %9 +@echo off
+rem A batch program to build PGO (Profile guided optimization) by first
+rem building instrumented binaries, then running the testsuite, and
+rem finally building the optimized code.
+rem Note, after the first instrumented run, one can just keep on
+rem building the PGUpdate configuration while developing.
+
+setlocal
+set platf=Win32
+set parallel=/m
+set dir=%~dp0
+
+rem use the performance testsuite. This is quick and simple
+set job1="%dir%..\tools\pybench\pybench.py" -n 1 -C 1 --with-gc
+set path1="%dir%..\tools\pybench"
+
+rem or the whole testsuite for more thorough testing
+set job2="%dir%..\lib\test\regrtest.py"
+set path2="%dir%..\lib"
+
+set job=%job1%
+set clrpath=%path1%
+
+:CheckOpts
+if "%1"=="-p" (set platf=%2) & shift & shift & goto CheckOpts
+if "%1"=="-2" (set job=%job2%) & (set clrpath=%path2%) & shift & goto CheckOpts
+if "%1"=="-M" (set parallel=) & shift & goto CheckOpts
+
+
+rem We cannot cross compile PGO builds, as the optimization needs to be run natively
+set vs_platf=x86
+set PGO=%dir%win32-pgo
+
+if "%platf%"=="x64" (set vs_platf=amd64) & (set PGO=%dir%amd64-pgo)
+rem Setup the environment
+call "%dir%env.bat" %vs_platf%
+
+
+rem build the instrumented version
+msbuild "%dir%pcbuild.proj" %parallel% /t:Build /p:Configuration=PGInstrument /p:Platform=%platf% %1 %2 %3 %4 %5 %6 %7 %8 %9
+
+rem remove .pyc files, .pgc files and execute the job
+"%PGO%\python.exe" "%dir%rmpyc.py" %clrpath%
+del "%PGO%\*.pgc"
+"%PGO%\python.exe" %job%
+
+rem build optimized version
+msbuild "%dir%pcbuild.proj" %parallel% /t:Build /p:Configuration=PGUpdate /p:Platform=%platf% %1 %2 %3 %4 %5 %6 %7 %8 %9
diff --git a/PCbuild/clean.bat b/PCbuild/clean.bat index 6144c71..78517d2 100644 --- a/PCbuild/clean.bat +++ b/PCbuild/clean.bat @@ -1,5 +1,5 @@ -@echo off -rem A batch program to clean a particular configuration, -rem just for convenience. - -call %~dp0build.bat -t Clean %* +@echo off
+rem A batch program to clean a particular configuration,
+rem just for convenience.
+
+call %~dp0build.bat -t Clean %*
diff --git a/PCbuild/env.bat b/PCbuild/env.bat index 9d4c9d1..2b2c005 100644 --- a/PCbuild/env.bat +++ b/PCbuild/env.bat @@ -1,16 +1,16 @@ -@echo off -rem This script adds the latest available tools to the path for the current -rem command window. However, most builds of Python will ignore the version -rem of the tools on PATH and use PlatformToolset instead. Ideally, both sets of -rem tools should be the same version to avoid potential conflicts. -rem -rem To build Python with an earlier toolset, pass "/p:PlatformToolset=v100" (or -rem 'v110', 'v120' or 'v140') to the build script. - -echo Build environments: x86, amd64, x86_amd64 -echo. -set VSTOOLS=%VS140COMNTOOLS% -if "%VSTOOLS%"=="" set VSTOOLS=%VS120COMNTOOLS% -if "%VSTOOLS%"=="" set VSTOOLS=%VS110COMNTOOLS% -if "%VSTOOLS%"=="" set VSTOOLS=%VS100COMNTOOLS% -call "%VSTOOLS%..\..\VC\vcvarsall.bat" %* +@echo off
+rem This script adds the latest available tools to the path for the current
+rem command window. However, most builds of Python will ignore the version
+rem of the tools on PATH and use PlatformToolset instead. Ideally, both sets of
+rem tools should be the same version to avoid potential conflicts.
+rem
+rem To build Python with an earlier toolset, pass "/p:PlatformToolset=v100" (or
+rem 'v110', 'v120' or 'v140') to the build script.
+
+echo Build environments: x86, amd64, x86_amd64
+echo.
+set VSTOOLS=%VS140COMNTOOLS%
+if "%VSTOOLS%"=="" set VSTOOLS=%VS120COMNTOOLS%
+if "%VSTOOLS%"=="" set VSTOOLS=%VS110COMNTOOLS%
+if "%VSTOOLS%"=="" set VSTOOLS=%VS100COMNTOOLS%
+call "%VSTOOLS%..\..\VC\vcvarsall.bat" %*
diff --git a/PCbuild/get_externals.bat b/PCbuild/get_externals.bat index a1d5225..f778eaa 100644 --- a/PCbuild/get_externals.bat +++ b/PCbuild/get_externals.bat @@ -1,103 +1,103 @@ -@echo off -setlocal -rem Simple script to fetch source for external libraries - -if not exist "%~dp0..\externals" mkdir "%~dp0..\externals" -pushd "%~dp0..\externals" - -if "%SVNROOT%"=="" set SVNROOT=http://svn.python.org/projects/external/ - -rem Optionally clean up first. Be warned that this can be very destructive! -if not "%1"=="" ( - for %%c in (-c --clean --clean-only) do ( - if "%1"=="%%c" goto clean - ) - goto usage -) -goto fetch - -:clean -echo.Cleaning up external libraries. -for /D %%d in ( - bzip2-* - db-* - nasm-* - openssl-* - tcl-* - tcltk* - tk-* - tix-* - sqlite-* - xz-* - ) do ( - echo.Removing %%d - rmdir /s /q %%d -) -if "%1"=="--clean-only" ( - goto end -) - -:fetch -rem Fetch current versions - -svn --version > nul 2>&1 -if ERRORLEVEL 9009 ( - echo.svn.exe must be on your PATH. - echo.Try TortoiseSVN (http://tortoisesvn.net/^) and be sure to check the - echo.command line tools option. - popd - exit /b 1 -) - -echo.Fetching external libraries... - -for %%e in ( - bzip2-1.0.6 - nasm-2.11.06 - openssl-1.0.2a - tcl-core-8.6.3.1 - tk-8.6.3.1 - tix-8.4.3.4 - sqlite-3.8.3.1 - xz-5.0.5 - ) do ( - if exist %%e ( - echo.%%e already exists, skipping. - ) else ( - echo.Fetching %%e... - svn export %SVNROOT%%%e - ) -) - -goto end - -:usage -echo.invalid argument: %1 -echo.usage: %~n0 [[ -c ^| --clean ] ^| --clean-only ] -echo. -echo.Pull all sources necessary for compiling optional extension modules -echo.that rely on external libraries. Requires svn.exe to be on your PATH -echo.and pulls sources from %SVNROOT%. -echo. -echo.Use the -c or --clean option to clean up all external library sources -echo.before pulling in the current versions. -echo. -echo.Use the --clean-only option to do the same cleaning, without pulling in -echo.anything new. -echo. -echo.Only the first argument is checked, all others are ignored. -echo. -echo.**WARNING**: the cleaning options unconditionally remove any directory -echo.that is a child of -echo. %CD% -echo.and matches wildcard patterns beginning with bzip2-, db-, nasm-, openssl-, -echo.tcl-, tcltk, tk-, tix-, sqlite-, or xz-, and as such has the potential -echo.to be very destructive if you are not aware of what it is doing. Use with -echo.caution! -popd -exit /b -1 - - -:end -echo Finished. -popd +@echo off
+setlocal
+rem Simple script to fetch source for external libraries
+
+if not exist "%~dp0..\externals" mkdir "%~dp0..\externals"
+pushd "%~dp0..\externals"
+
+if "%SVNROOT%"=="" set SVNROOT=http://svn.python.org/projects/external/
+
+rem Optionally clean up first. Be warned that this can be very destructive!
+if not "%1"=="" (
+ for %%c in (-c --clean --clean-only) do (
+ if "%1"=="%%c" goto clean
+ )
+ goto usage
+)
+goto fetch
+
+:clean
+echo.Cleaning up external libraries.
+for /D %%d in (
+ bzip2-*
+ db-*
+ nasm-*
+ openssl-*
+ tcl-*
+ tcltk*
+ tk-*
+ tix-*
+ sqlite-*
+ xz-*
+ ) do (
+ echo.Removing %%d
+ rmdir /s /q %%d
+)
+if "%1"=="--clean-only" (
+ goto end
+)
+
+:fetch
+rem Fetch current versions
+
+svn --version > nul 2>&1
+if ERRORLEVEL 9009 (
+ echo.svn.exe must be on your PATH.
+ echo.Try TortoiseSVN (http://tortoisesvn.net/^) and be sure to check the
+ echo.command line tools option.
+ popd
+ exit /b 1
+)
+
+echo.Fetching external libraries...
+
+for %%e in (
+ bzip2-1.0.6
+ nasm-2.11.06
+ openssl-1.0.2a
+ tcl-core-8.6.3.1
+ tk-8.6.3.1
+ tix-8.4.3.4
+ sqlite-3.8.3.1
+ xz-5.0.5
+ ) do (
+ if exist %%e (
+ echo.%%e already exists, skipping.
+ ) else (
+ echo.Fetching %%e...
+ svn export %SVNROOT%%%e
+ )
+)
+
+goto end
+
+:usage
+echo.invalid argument: %1
+echo.usage: %~n0 [[ -c ^| --clean ] ^| --clean-only ]
+echo.
+echo.Pull all sources necessary for compiling optional extension modules
+echo.that rely on external libraries. Requires svn.exe to be on your PATH
+echo.and pulls sources from %SVNROOT%.
+echo.
+echo.Use the -c or --clean option to clean up all external library sources
+echo.before pulling in the current versions.
+echo.
+echo.Use the --clean-only option to do the same cleaning, without pulling in
+echo.anything new.
+echo.
+echo.Only the first argument is checked, all others are ignored.
+echo.
+echo.**WARNING**: the cleaning options unconditionally remove any directory
+echo.that is a child of
+echo. %CD%
+echo.and matches wildcard patterns beginning with bzip2-, db-, nasm-, openssl-,
+echo.tcl-, tcltk, tk-, tix-, sqlite-, or xz-, and as such has the potential
+echo.to be very destructive if you are not aware of what it is doing. Use with
+echo.caution!
+popd
+exit /b -1
+
+
+:end
+echo Finished.
+popd
diff --git a/PCbuild/idle.bat b/PCbuild/idle.bat index 1978b99..bacaaa8 100644 --- a/PCbuild/idle.bat +++ b/PCbuild/idle.bat @@ -1,15 +1,15 @@ -@echo off -rem start idle -rem Usage: idle [-d] -rem -d Run Debug build (python_d.exe). Else release build. - -setlocal -set exe=win32\python -PATH %PATH%;..\externals\tcltk\bin - -if "%1"=="-d" (set exe=%exe%_d) & shift - -set cmd=%exe% ../Lib/idlelib/idle.py %1 %2 %3 %4 %5 %6 %7 %8 %9 - -echo on -%cmd% +@echo off
+rem start idle
+rem Usage: idle [-d]
+rem -d Run Debug build (python_d.exe). Else release build.
+
+setlocal
+set exe=win32\python
+PATH %PATH%;..\externals\tcltk\bin
+
+if "%1"=="-d" (set exe=%exe%_d) & shift
+
+set cmd=%exe% ../Lib/idlelib/idle.py %1 %2 %3 %4 %5 %6 %7 %8 %9
+
+echo on
+%cmd%
diff --git a/PCbuild/prepare_ssl.bat b/PCbuild/prepare_ssl.bat index cb06500..c08a9f3 100644 --- a/PCbuild/prepare_ssl.bat +++ b/PCbuild/prepare_ssl.bat @@ -1,12 +1,12 @@ -@echo off -if not defined HOST_PYTHON ( - if %1 EQU Debug ( - shift - set HOST_PYTHON=python_d.exe - if not exist python35_d.dll exit 1 - ) ELSE ( - set HOST_PYTHON=python.exe - if not exist python35.dll exit 1 - ) -) -%HOST_PYTHON% prepare_ssl.py %1 +@echo off
+if not defined HOST_PYTHON (
+ if %1 EQU Debug (
+ shift
+ set HOST_PYTHON=python_d.exe
+ if not exist python35_d.dll exit 1
+ ) ELSE (
+ set HOST_PYTHON=python.exe
+ if not exist python35.dll exit 1
+ )
+)
+%HOST_PYTHON% prepare_ssl.py %1
diff --git a/PCbuild/rt.bat b/PCbuild/rt.bat index 5041cd3..039c810 100644 --- a/PCbuild/rt.bat +++ b/PCbuild/rt.bat @@ -1,58 +1,58 @@ -@echo off -rem Run Tests. Run the regression test suite. -rem Usage: rt [-d] [-O] [-q] [-x64] regrtest_args -rem -d Run Debug build (python_d.exe). Else release build. -rem -O Run python.exe or python_d.exe (see -d) with -O. -rem -q "quick" -- normally the tests are run twice, the first time -rem after deleting all the .py[co] files reachable from Lib/. -rem -q runs the tests just once, and without deleting .py[co] files. -rem -x64 Run the 64-bit build of python (or python_d if -d was specified) -rem from the 'amd64' dir instead of the 32-bit build in this dir. -rem All leading instances of these switches are shifted off, and -rem whatever remains (up to 9 arguments) is passed to regrtest.py. -rem For example, -rem rt -O -d -x test_thread -rem runs -rem python_d -O ../lib/test/regrtest.py -x test_thread -rem twice, and -rem rt -q -g test_binascii -rem runs -rem python_d ../lib/test/regrtest.py -g test_binascii -rem to generate the expected-output file for binascii quickly. -rem -rem Confusing: if you want to pass a comma-separated list, like -rem -u network,largefile -rem then you have to quote it on the rt line, like -rem rt -u "network,largefile" - -setlocal - -set pcbuild=%~dp0 -set prefix=%pcbuild%win32\ -set suffix= -set qmode= -set dashO= - -:CheckOpts -if "%1"=="-O" (set dashO=-O) & shift & goto CheckOpts -if "%1"=="-q" (set qmode=yes) & shift & goto CheckOpts -if "%1"=="-d" (set suffix=_d) & shift & goto CheckOpts -if "%1"=="-x64" (set prefix=%pcbuild%amd64\) & shift & goto CheckOpts - -set exe=%prefix%python%suffix%.exe -set cmd="%exe%" %dashO% -Wd -E -bb "%pcbuild%..\lib\test\regrtest.py" %1 %2 %3 %4 %5 %6 %7 %8 %9 -if defined qmode goto Qmode - -echo Deleting .pyc/.pyo files ... -"%exe%" "%pcbuild%rmpyc.py" - -echo on -%cmd% -@echo off - -echo About to run again without deleting .pyc/.pyo first: -pause - -:Qmode -echo on -%cmd% +@echo off
+rem Run Tests. Run the regression test suite.
+rem Usage: rt [-d] [-O] [-q] [-x64] regrtest_args
+rem -d Run Debug build (python_d.exe). Else release build.
+rem -O Run python.exe or python_d.exe (see -d) with -O.
+rem -q "quick" -- normally the tests are run twice, the first time
+rem after deleting all the .py[co] files reachable from Lib/.
+rem -q runs the tests just once, and without deleting .py[co] files.
+rem -x64 Run the 64-bit build of python (or python_d if -d was specified)
+rem from the 'amd64' dir instead of the 32-bit build in this dir.
+rem All leading instances of these switches are shifted off, and
+rem whatever remains (up to 9 arguments) is passed to regrtest.py.
+rem For example,
+rem rt -O -d -x test_thread
+rem runs
+rem python_d -O ../lib/test/regrtest.py -x test_thread
+rem twice, and
+rem rt -q -g test_binascii
+rem runs
+rem python_d ../lib/test/regrtest.py -g test_binascii
+rem to generate the expected-output file for binascii quickly.
+rem
+rem Confusing: if you want to pass a comma-separated list, like
+rem -u network,largefile
+rem then you have to quote it on the rt line, like
+rem rt -u "network,largefile"
+
+setlocal
+
+set pcbuild=%~dp0
+set prefix=%pcbuild%win32\
+set suffix=
+set qmode=
+set dashO=
+
+:CheckOpts
+if "%1"=="-O" (set dashO=-O) & shift & goto CheckOpts
+if "%1"=="-q" (set qmode=yes) & shift & goto CheckOpts
+if "%1"=="-d" (set suffix=_d) & shift & goto CheckOpts
+if "%1"=="-x64" (set prefix=%pcbuild%amd64\) & shift & goto CheckOpts
+
+set exe=%prefix%python%suffix%.exe
+set cmd="%exe%" %dashO% -Wd -E -bb "%pcbuild%..\lib\test\regrtest.py" %1 %2 %3 %4 %5 %6 %7 %8 %9
+if defined qmode goto Qmode
+
+echo Deleting .pyc/.pyo files ...
+"%exe%" "%pcbuild%rmpyc.py"
+
+echo on
+%cmd%
+@echo off
+
+echo About to run again without deleting .pyc/.pyo first:
+pause
+
+:Qmode
+echo on
+%cmd%
diff --git a/Tools/buildbot/build-amd64.bat b/Tools/buildbot/build-amd64.bat index 115e111..8b93bb0 100644 --- a/Tools/buildbot/build-amd64.bat +++ b/Tools/buildbot/build-amd64.bat @@ -1,2 +1,2 @@ -@rem Used by the buildbot "compile" step. -call "%~dp0build.bat" -p x64 %* +@rem Used by the buildbot "compile" step.
+call "%~dp0build.bat" -p x64 %*
diff --git a/Tools/buildbot/build.bat b/Tools/buildbot/build.bat index 83a5dfd..1debfc1 100644 --- a/Tools/buildbot/build.bat +++ b/Tools/buildbot/build.bat @@ -1,20 +1,20 @@ -@rem Used by the buildbot "compile" step. - -@rem Clean up -set PLAT= -if '%1' EQU '-p' if '%2' EQU 'x64' (set PLAT=-amd64) - -call "%~dp0clean%PLAT%.bat" - -@rem If you need the buildbots to start fresh (such as when upgrading to -@rem a new version of an external library, especially Tcl/Tk): -@rem 1) uncomment the following line: - -@rem call "%~dp0..\..\PCbuild\get_externals.bat" --clean-only - -@rem 2) commit and push -@rem 3) wait for all Windows bots to start a build with that changeset -@rem 4) re-comment, commit and push again - -@rem Do the build -call "%~dp0..\..\PCbuild\build.bat" -e -d -v %* +@rem Used by the buildbot "compile" step.
+
+@rem Clean up
+set PLAT=
+if '%1' EQU '-p' if '%2' EQU 'x64' (set PLAT=-amd64)
+
+call "%~dp0clean%PLAT%.bat"
+
+@rem If you need the buildbots to start fresh (such as when upgrading to
+@rem a new version of an external library, especially Tcl/Tk):
+@rem 1) uncomment the following line:
+
+@rem call "%~dp0..\..\PCbuild\get_externals.bat" --clean-only
+
+@rem 2) commit and push
+@rem 3) wait for all Windows bots to start a build with that changeset
+@rem 4) re-comment, commit and push again
+
+@rem Do the build
+call "%~dp0..\..\PCbuild\build.bat" -e -d -v %*
diff --git a/Tools/buildbot/buildmsi.bat b/Tools/buildbot/buildmsi.bat index 6804d79..e3c2dbd 100644 --- a/Tools/buildbot/buildmsi.bat +++ b/Tools/buildbot/buildmsi.bat @@ -1,9 +1,9 @@ -@rem Used by the buildbot "buildmsi" step. -setlocal - -pushd - -@rem build both snapshot MSIs -call "%~dp0..\msi\build.bat" -x86 -x64 - +@rem Used by the buildbot "buildmsi" step.
+setlocal
+
+pushd
+
+@rem build both snapshot MSIs
+call "%~dp0..\msi\build.bat" -x86 -x64
+
popd
\ No newline at end of file diff --git a/Tools/buildbot/clean-amd64.bat b/Tools/buildbot/clean-amd64.bat index b4882c2..5e68e30 100644 --- a/Tools/buildbot/clean-amd64.bat +++ b/Tools/buildbot/clean-amd64.bat @@ -1,2 +1,2 @@ -@rem Used by the buildbot "clean" step. -@call "%~dp0clean.bat" x64 +@rem Used by the buildbot "clean" step.
+@call "%~dp0clean.bat" x64
diff --git a/Tools/buildbot/clean.bat b/Tools/buildbot/clean.bat index 09328bc..6890453 100644 --- a/Tools/buildbot/clean.bat +++ b/Tools/buildbot/clean.bat @@ -1,29 +1,29 @@ -@echo off -rem Used by the buildbot "clean" step. - -setlocal -set root=%~dp0..\.. -set pcbuild=%root%\PCbuild - -if "%1" == "x64" ( - set vcvars_target=x86_amd64 - set platform=x64 -) else ( - set vcvars_target=x86 - set platform=Win32 -) - -call "%pcbuild%\env.bat" %vcvars_target% - -echo.Attempting to kill Pythons... -msbuild /v:m /nologo /target:KillPython "%pcbuild%\pythoncore.vcxproj" /p:Configuration=Release /p:Platform=%platform% /p:KillPython=true - -echo Deleting .pyc/.pyo files ... -del /s "%root%\Lib\*.pyc" "%root%\Lib\*.pyo" - -echo Deleting test leftovers ... -rmdir /s /q "%root%\build" - -echo Deleting build -msbuild /v:m /nologo /target:clean "%pcbuild%\pcbuild.proj" /p:Configuration=Release /p:Platform=%platform% -msbuild /v:m /nologo /target:clean "%pcbuild%\pcbuild.proj" /p:Configuration=Debug /p:Platform=%platform% +@echo off
+rem Used by the buildbot "clean" step.
+
+setlocal
+set root=%~dp0..\..
+set pcbuild=%root%\PCbuild
+
+if "%1" == "x64" (
+ set vcvars_target=x86_amd64
+ set platform=x64
+) else (
+ set vcvars_target=x86
+ set platform=Win32
+)
+
+call "%pcbuild%\env.bat" %vcvars_target%
+
+echo.Attempting to kill Pythons...
+msbuild /v:m /nologo /target:KillPython "%pcbuild%\pythoncore.vcxproj" /p:Configuration=Release /p:Platform=%platform% /p:KillPython=true
+
+echo Deleting .pyc/.pyo files ...
+del /s "%root%\Lib\*.pyc" "%root%\Lib\*.pyo"
+
+echo Deleting test leftovers ...
+rmdir /s /q "%root%\build"
+
+echo Deleting build
+msbuild /v:m /nologo /target:clean "%pcbuild%\pcbuild.proj" /p:Configuration=Release /p:Platform=%platform%
+msbuild /v:m /nologo /target:clean "%pcbuild%\pcbuild.proj" /p:Configuration=Debug /p:Platform=%platform%
diff --git a/Tools/buildbot/external-amd64.bat b/Tools/buildbot/external-amd64.bat index 7a570d9..13056c7 100644 --- a/Tools/buildbot/external-amd64.bat +++ b/Tools/buildbot/external-amd64.bat @@ -1,2 +1,2 @@ -@echo Please use PCbuild\get_externals.bat instead. -@"%~dp0..\..\PCbuild\get_externals.bat" %* +@echo Please use PCbuild\get_externals.bat instead.
+@"%~dp0..\..\PCbuild\get_externals.bat" %*
diff --git a/Tools/buildbot/external.bat b/Tools/buildbot/external.bat index 7a570d9..13056c7 100644 --- a/Tools/buildbot/external.bat +++ b/Tools/buildbot/external.bat @@ -1,2 +1,2 @@ -@echo Please use PCbuild\get_externals.bat instead. -@"%~dp0..\..\PCbuild\get_externals.bat" %* +@echo Please use PCbuild\get_externals.bat instead.
+@"%~dp0..\..\PCbuild\get_externals.bat" %*
diff --git a/Tools/buildbot/test-amd64.bat b/Tools/buildbot/test-amd64.bat index 7a241f5..044026f 100644 --- a/Tools/buildbot/test-amd64.bat +++ b/Tools/buildbot/test-amd64.bat @@ -1,7 +1,7 @@ -@rem Used by the buildbot "test" step. - -setlocal -rem The following line should be removed before #20035 is closed -set TCL_LIBRARY=%~dp0..\..\externals\tcltk64\lib\tcl8.6 - -call "%~dp0..\..\PCbuild\rt.bat" -d -q -x64 -uall -rwW -n --timeout=3600 %* +@rem Used by the buildbot "test" step.
+
+setlocal
+rem The following line should be removed before #20035 is closed
+set TCL_LIBRARY=%~dp0..\..\externals\tcltk64\lib\tcl8.6
+
+call "%~dp0..\..\PCbuild\rt.bat" -d -q -x64 -uall -rwW -n --timeout=3600 %*
diff --git a/Tools/buildbot/test.bat b/Tools/buildbot/test.bat index 6a6448c..427957b 100644 --- a/Tools/buildbot/test.bat +++ b/Tools/buildbot/test.bat @@ -1,7 +1,7 @@ -@rem Used by the buildbot "test" step. - -setlocal -rem The following line should be removed before #20035 is closed -set TCL_LIBRARY=%~dp0..\..\externals\tcltk\lib\tcl8.6 - -call "%~dp0..\..\PCbuild\rt.bat" -d -q -uall -rwW -n --timeout=3600 %* +@rem Used by the buildbot "test" step.
+
+setlocal
+rem The following line should be removed before #20035 is closed
+set TCL_LIBRARY=%~dp0..\..\externals\tcltk\lib\tcl8.6
+
+call "%~dp0..\..\PCbuild\rt.bat" -d -q -uall -rwW -n --timeout=3600 %*
diff --git a/Tools/msi/build.bat b/Tools/msi/build.bat index efee66b..4dfa5fb 100644 --- a/Tools/msi/build.bat +++ b/Tools/msi/build.bat @@ -1,46 +1,46 @@ -@echo off -setlocal -set D=%~dp0 -set PCBUILD=%D%..\..\PCBuild\ - -set BUILDX86= -set BUILDX64= -set BUILDDOC= - -:CheckOpts -if '%1'=='-x86' (set BUILDX86=1) && shift && goto CheckOpts -if '%1'=='-x64' (set BUILDX64=1) && shift && goto CheckOpts -if '%1'=='--doc' (set BUILDDOC=1) && shift && goto CheckOpts - -if not defined BUILDX86 if not defined BUILDX64 (set BUILDX86=1) && (set BUILDX64=1) - -call "%PCBUILD%env.bat" x86 - -if defined BUILDX86 ( - call "%PCBUILD%build.bat" -d - if errorlevel 1 goto :eof - call "%PCBUILD%build.bat" - if errorlevel 1 goto :eof -) -if defined BUILDX64 ( - call "%PCBUILD%build.bat" -p x64 -d - if errorlevel 1 goto :eof - call "%PCBUILD%build.bat" -p x64 - if errorlevel 1 goto :eof -) - -if defined BUILDDOC ( - call "%PCBUILD%..\Doc\make.bat" htmlhelp - if errorlevel 1 goto :eof -) - -if defined BUILDX86 ( - "%PCBUILD%win32\python.exe" "%D%get_wix.py" - msbuild "%D%bundle\snapshot.wixproj" - if errorlevel 1 goto :eof -) -if defined BUILDX64 ( - "%PCBUILD%amd64\python.exe" "%D%get_wix.py" - msbuild "%D%bundle\snapshot.wixproj" /p:Platform=x64 - if errorlevel 1 goto :eof -) +@echo off
+setlocal
+set D=%~dp0
+set PCBUILD=%D%..\..\PCBuild\
+
+set BUILDX86=
+set BUILDX64=
+set BUILDDOC=
+
+:CheckOpts
+if '%1'=='-x86' (set BUILDX86=1) && shift && goto CheckOpts
+if '%1'=='-x64' (set BUILDX64=1) && shift && goto CheckOpts
+if '%1'=='--doc' (set BUILDDOC=1) && shift && goto CheckOpts
+
+if not defined BUILDX86 if not defined BUILDX64 (set BUILDX86=1) && (set BUILDX64=1)
+
+call "%PCBUILD%env.bat" x86
+
+if defined BUILDX86 (
+ call "%PCBUILD%build.bat" -d
+ if errorlevel 1 goto :eof
+ call "%PCBUILD%build.bat"
+ if errorlevel 1 goto :eof
+)
+if defined BUILDX64 (
+ call "%PCBUILD%build.bat" -p x64 -d
+ if errorlevel 1 goto :eof
+ call "%PCBUILD%build.bat" -p x64
+ if errorlevel 1 goto :eof
+)
+
+if defined BUILDDOC (
+ call "%PCBUILD%..\Doc\make.bat" htmlhelp
+ if errorlevel 1 goto :eof
+)
+
+if defined BUILDX86 (
+ "%PCBUILD%win32\python.exe" "%D%get_wix.py"
+ msbuild "%D%bundle\snapshot.wixproj"
+ if errorlevel 1 goto :eof
+)
+if defined BUILDX64 (
+ "%PCBUILD%amd64\python.exe" "%D%get_wix.py"
+ msbuild "%D%bundle\snapshot.wixproj" /p:Platform=x64
+ if errorlevel 1 goto :eof
+)
diff --git a/Tools/msi/buildrelease.bat b/Tools/msi/buildrelease.bat index 09c63a6..25f4508 100644 --- a/Tools/msi/buildrelease.bat +++ b/Tools/msi/buildrelease.bat @@ -1,164 +1,164 @@ -@setlocal -@echo off - -rem This script is intended for building official releases of Python. -rem To use it to build alternative releases, you should clone this file -rem and modify the following three URIs. -rem -rem The first two will ensure that your release can be installed -rem alongside an official Python release, while the second specifies -rem the URL that will be used to download installation files. The -rem files available from this URL *will* conflict with your installer. -rem Trust me, you don't want them, even if it seems like a good idea. - -set RELEASE_URI_X86=http://www.python.org/win32 -set RELEASE_URI_X64=http://www.python.org/amd64 -set DOWNLOAD_URL_BASE=https://www.python.org/ftp/python -set DOWNLOAD_URL= - -set D=%~dp0 -set PCBUILD=%D%..\..\PCBuild\ - -set BUILDX86= -set BUILDX64= -set TARGET=Rebuild -set TESTTARGETDIR= - - -:CheckOpts -if "%1" EQU "-h" goto Help -if "%1" EQU "-c" (set CERTNAME=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "--certificate" (set CERTNAME=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "-o" (set OUTDIR=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "--out" (set OUTDIR=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "-D" (set SKIPDOC=1) && shift && goto CheckOpts -if "%1" EQU "--skip-doc" (set SKIPDOC=1) && shift && goto CheckOpts -if "%1" EQU "-B" (set SKIPBUILD=1) && shift && goto CheckOpts -if "%1" EQU "--skip-build" (set SKIPBUILD=1) && shift && goto CheckOpts -if "%1" EQU "--download" (set DOWNLOAD_URL=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "--test" (set TESTTARGETDIR=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "-b" (set TARGET=Build) && shift && goto CheckOpts -if "%1" EQU "--build" (set TARGET=Build) && shift && goto CheckOpts -if "%1" EQU "-x86" (set BUILDX86=1) && shift && goto CheckOpts -if "%1" EQU "-x64" (set BUILDX64=1) && shift && goto CheckOpts - -if not defined BUILDX86 if not defined BUILDX64 (set BUILDX86=1) && (set BUILDX64=1) - -:builddoc -if "%SKIPBUILD%" EQU "1" goto skipdoc -if "%SKIPDOC%" EQU "1" goto skipdoc - -if not defined PYTHON where py -q || echo Cannot find py on path and PYTHON is not set. && exit /B 1 -if not defined SPHINXBUILD where sphinx-build -q || echo Cannot find sphinx-build on path and SPHINXBUILD is not set. && exit /B 1 -call "%D%..\..\doc\make.bat" htmlhelp -if errorlevel 1 goto :eof -:skipdoc - -where hg /q || echo Cannot find Mercurial on PATH && exit /B 1 - -where dlltool /q && goto skipdlltoolsearch -set _DLLTOOL_PATH= -where /R "%D%..\..\externals" dlltool > "%TEMP%\dlltool.loc" 2> nul && set /P _DLLTOOL_PATH= < "%TEMP%\dlltool.loc" & del "%TEMP%\dlltool.loc" -if not exist "%_DLLTOOL_PATH%" echo Cannot find binutils on PATH or in external && exit /B 1 -for %%f in (%_DLLTOOL_PATH%) do set PATH=%PATH%;%%~dpf -set _DLLTOOL_PATH= -:skipdlltoolsearch - -if defined BUILDX86 ( - call :build x86 - if errorlevel 1 exit /B -) - -if defined BUILDX64 ( - call :build x64 - if errorlevel 1 exit /B -) - -if defined TESTTARGETDIR ( - call "%D%testrelease.bat" -t "%TESTTARGETDIR%" -) - -exit /B 0 - -:build -@setlocal -@echo off - -if "%1" EQU "x86" ( - call "%PCBUILD%env.bat" x86 - set BUILD=%PCBUILD%win32\ - set BUILD_PLAT=Win32 - set OUTDIR_PLAT=win32 - set OBJDIR_PLAT=x86 - set RELEASE_URI=%RELEASE_URI_X86% -) ELSE ( - call "%PCBUILD%env.bat" x86_amd64 - set BUILD=%PCBUILD%amd64\ - set BUILD_PLAT=x64 - set OUTDIR_PLAT=amd64 - set OBJDIR_PLAT=x64 - set RELEASE_URI=%RELEASE_URI_X64% -) - -if exist "%BUILD%en-us" ( - echo Deleting %BUILD%en-us - rmdir /q/s "%BUILD%en-us" - if errorlevel 1 exit /B -) - -if exist "%D%obj\Release_%OBJDIR_PLAT%" ( - echo Deleting "%D%obj\Release_%OBJDIR_PLAT%" - rmdir /q/s "%D%obj\Release_%OBJDIR_PLAT%" - if errorlevel 1 exit /B -) - -if not "%CERTNAME%" EQU "" ( - set CERTOPTS="/p:SigningCertificate=%CERTNAME%" -) else ( - set CERTOPTS= -) - -if not "%SKIPBUILD%" EQU "1" ( - call "%PCBUILD%build.bat" -e -p %BUILD_PLAT% -d -t %TARGET% %CERTOPTS% - if errorlevel 1 exit /B - call "%PCBUILD%build.bat" -p %BUILD_PLAT% -t %TARGET% %CERTOPTS% - if errorlevel 1 exit /B - @rem build.bat turns echo back on, so we disable it again - @echo off -) - -"%BUILD%python.exe" "%D%get_wix.py" - -set BUILDOPTS=/p:Platform=%1 /p:BuildForRelease=true /p:DownloadUrl=%DOWNLOAD_URL% /p:DownloadUrlBase=%DOWNLOAD_URL_BASE% /p:ReleaseUri=%RELEASE_URI% -msbuild "%D%bundle\releaselocal.wixproj" /t:Rebuild %BUILDOPTS% %CERTOPTS% /p:RebuildAll=true -if errorlevel 1 exit /B -msbuild "%D%bundle\releaseweb.wixproj" /t:Rebuild %BUILDOPTS% %CERTOPTS% /p:RebuildAll=false -if errorlevel 1 exit /B - -if not "%OUTDIR%" EQU "" ( - mkdir "%OUTDIR%\%OUTDIR_PLAT%" - copy /Y "%BUILD%en-us\*.cab" "%OUTDIR%\%OUTDIR_PLAT%" - copy /Y "%BUILD%en-us\*.exe" "%OUTDIR%\%OUTDIR_PLAT%" - copy /Y "%BUILD%en-us\*.msi" "%OUTDIR%\%OUTDIR_PLAT%" - copy /Y "%BUILD%en-us\*.msu" "%OUTDIR%\%OUTDIR_PLAT%" -) - -exit /B 0 - -:Help -echo buildrelease.bat [--out DIR] [-x86] [-x64] [--certificate CERTNAME] [--build] [--skip-build] -echo [--skip-doc] [--download DOWNLOAD URL] [--test TARGETDIR] [-h] -echo. -echo --out (-o) Specify an additional output directory for installers -echo -x86 Build x86 installers -echo -x64 Build x64 installers -echo --build (-b) Incrementally build Python rather than rebuilding -echo --skip-build (-B) Do not build Python (just do the installers) -echo --skip-doc (-D) Do not build documentation -echo --download Specify the full download URL for MSIs (should include {2}) -echo --test Specify the test directory to run the installer tests -echo -h Display this help information -echo. -echo If no architecture is specified, all architectures will be built. -echo If --test is not specified, the installer tests are not run. +@setlocal
+@echo off
+
+rem This script is intended for building official releases of Python.
+rem To use it to build alternative releases, you should clone this file
+rem and modify the following three URIs.
+rem
+rem The first two will ensure that your release can be installed
+rem alongside an official Python release, while the second specifies
+rem the URL that will be used to download installation files. The
+rem files available from this URL *will* conflict with your installer.
+rem Trust me, you don't want them, even if it seems like a good idea.
+
+set RELEASE_URI_X86=http://www.python.org/win32
+set RELEASE_URI_X64=http://www.python.org/amd64
+set DOWNLOAD_URL_BASE=https://www.python.org/ftp/python
+set DOWNLOAD_URL=
+
+set D=%~dp0
+set PCBUILD=%D%..\..\PCBuild\
+
+set BUILDX86=
+set BUILDX64=
+set TARGET=Rebuild
+set TESTTARGETDIR=
+
+
+:CheckOpts
+if "%1" EQU "-h" goto Help
+if "%1" EQU "-c" (set CERTNAME=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "--certificate" (set CERTNAME=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "-o" (set OUTDIR=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "--out" (set OUTDIR=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "-D" (set SKIPDOC=1) && shift && goto CheckOpts
+if "%1" EQU "--skip-doc" (set SKIPDOC=1) && shift && goto CheckOpts
+if "%1" EQU "-B" (set SKIPBUILD=1) && shift && goto CheckOpts
+if "%1" EQU "--skip-build" (set SKIPBUILD=1) && shift && goto CheckOpts
+if "%1" EQU "--download" (set DOWNLOAD_URL=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "--test" (set TESTTARGETDIR=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "-b" (set TARGET=Build) && shift && goto CheckOpts
+if "%1" EQU "--build" (set TARGET=Build) && shift && goto CheckOpts
+if "%1" EQU "-x86" (set BUILDX86=1) && shift && goto CheckOpts
+if "%1" EQU "-x64" (set BUILDX64=1) && shift && goto CheckOpts
+
+if not defined BUILDX86 if not defined BUILDX64 (set BUILDX86=1) && (set BUILDX64=1)
+
+:builddoc
+if "%SKIPBUILD%" EQU "1" goto skipdoc
+if "%SKIPDOC%" EQU "1" goto skipdoc
+
+if not defined PYTHON where py -q || echo Cannot find py on path and PYTHON is not set. && exit /B 1
+if not defined SPHINXBUILD where sphinx-build -q || echo Cannot find sphinx-build on path and SPHINXBUILD is not set. && exit /B 1
+call "%D%..\..\doc\make.bat" htmlhelp
+if errorlevel 1 goto :eof
+:skipdoc
+
+where hg /q || echo Cannot find Mercurial on PATH && exit /B 1
+
+where dlltool /q && goto skipdlltoolsearch
+set _DLLTOOL_PATH=
+where /R "%D%..\..\externals" dlltool > "%TEMP%\dlltool.loc" 2> nul && set /P _DLLTOOL_PATH= < "%TEMP%\dlltool.loc" & del "%TEMP%\dlltool.loc"
+if not exist "%_DLLTOOL_PATH%" echo Cannot find binutils on PATH or in external && exit /B 1
+for %%f in (%_DLLTOOL_PATH%) do set PATH=%PATH%;%%~dpf
+set _DLLTOOL_PATH=
+:skipdlltoolsearch
+
+if defined BUILDX86 (
+ call :build x86
+ if errorlevel 1 exit /B
+)
+
+if defined BUILDX64 (
+ call :build x64
+ if errorlevel 1 exit /B
+)
+
+if defined TESTTARGETDIR (
+ call "%D%testrelease.bat" -t "%TESTTARGETDIR%"
+)
+
+exit /B 0
+
+:build
+@setlocal
+@echo off
+
+if "%1" EQU "x86" (
+ call "%PCBUILD%env.bat" x86
+ set BUILD=%PCBUILD%win32\
+ set BUILD_PLAT=Win32
+ set OUTDIR_PLAT=win32
+ set OBJDIR_PLAT=x86
+ set RELEASE_URI=%RELEASE_URI_X86%
+) ELSE (
+ call "%PCBUILD%env.bat" x86_amd64
+ set BUILD=%PCBUILD%amd64\
+ set BUILD_PLAT=x64
+ set OUTDIR_PLAT=amd64
+ set OBJDIR_PLAT=x64
+ set RELEASE_URI=%RELEASE_URI_X64%
+)
+
+if exist "%BUILD%en-us" (
+ echo Deleting %BUILD%en-us
+ rmdir /q/s "%BUILD%en-us"
+ if errorlevel 1 exit /B
+)
+
+if exist "%D%obj\Release_%OBJDIR_PLAT%" (
+ echo Deleting "%D%obj\Release_%OBJDIR_PLAT%"
+ rmdir /q/s "%D%obj\Release_%OBJDIR_PLAT%"
+ if errorlevel 1 exit /B
+)
+
+if not "%CERTNAME%" EQU "" (
+ set CERTOPTS="/p:SigningCertificate=%CERTNAME%"
+) else (
+ set CERTOPTS=
+)
+
+if not "%SKIPBUILD%" EQU "1" (
+ call "%PCBUILD%build.bat" -e -p %BUILD_PLAT% -d -t %TARGET% %CERTOPTS%
+ if errorlevel 1 exit /B
+ call "%PCBUILD%build.bat" -p %BUILD_PLAT% -t %TARGET% %CERTOPTS%
+ if errorlevel 1 exit /B
+ @rem build.bat turns echo back on, so we disable it again
+ @echo off
+)
+
+"%BUILD%python.exe" "%D%get_wix.py"
+
+set BUILDOPTS=/p:Platform=%1 /p:BuildForRelease=true /p:DownloadUrl=%DOWNLOAD_URL% /p:DownloadUrlBase=%DOWNLOAD_URL_BASE% /p:ReleaseUri=%RELEASE_URI%
+msbuild "%D%bundle\releaselocal.wixproj" /t:Rebuild %BUILDOPTS% %CERTOPTS% /p:RebuildAll=true
+if errorlevel 1 exit /B
+msbuild "%D%bundle\releaseweb.wixproj" /t:Rebuild %BUILDOPTS% %CERTOPTS% /p:RebuildAll=false
+if errorlevel 1 exit /B
+
+if not "%OUTDIR%" EQU "" (
+ mkdir "%OUTDIR%\%OUTDIR_PLAT%"
+ copy /Y "%BUILD%en-us\*.cab" "%OUTDIR%\%OUTDIR_PLAT%"
+ copy /Y "%BUILD%en-us\*.exe" "%OUTDIR%\%OUTDIR_PLAT%"
+ copy /Y "%BUILD%en-us\*.msi" "%OUTDIR%\%OUTDIR_PLAT%"
+ copy /Y "%BUILD%en-us\*.msu" "%OUTDIR%\%OUTDIR_PLAT%"
+)
+
+exit /B 0
+
+:Help
+echo buildrelease.bat [--out DIR] [-x86] [-x64] [--certificate CERTNAME] [--build] [--skip-build]
+echo [--skip-doc] [--download DOWNLOAD URL] [--test TARGETDIR] [-h]
+echo.
+echo --out (-o) Specify an additional output directory for installers
+echo -x86 Build x86 installers
+echo -x64 Build x64 installers
+echo --build (-b) Incrementally build Python rather than rebuilding
+echo --skip-build (-B) Do not build Python (just do the installers)
+echo --skip-doc (-D) Do not build documentation
+echo --download Specify the full download URL for MSIs (should include {2})
+echo --test Specify the test directory to run the installer tests
+echo -h Display this help information
+echo.
+echo If no architecture is specified, all architectures will be built.
+echo If --test is not specified, the installer tests are not run.
echo.
\ No newline at end of file diff --git a/Tools/msi/testrelease.bat b/Tools/msi/testrelease.bat index aee5e2f..b93306a 100644 --- a/Tools/msi/testrelease.bat +++ b/Tools/msi/testrelease.bat @@ -1,114 +1,114 @@ -@setlocal -@echo off - -set D=%~dp0 -set PCBUILD=%D%..\..\PCBuild\ - -set TARGETDIR=%TEMP% -set TESTX86= -set TESTX64= -set TESTALLUSER= -set TESTPERUSER= - -:CheckOpts -if "%1" EQU "-h" goto Help -if "%1" EQU "-x86" (set TESTX86=1) && shift && goto CheckOpts -if "%1" EQU "-x64" (set TESTX64=1) && shift && goto CheckOpts -if "%1" EQU "-t" (set TARGETDIR=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "--target" (set TARGETDIR=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "-a" (set TESTALLUSER=1) && shift && goto CheckOpts -if "%1" EQU "--alluser" (set TESTALLUSER=1) && shift && goto CheckOpts -if "%1" EQU "-p" (set TESTPERUSER=1) && shift && goto CheckOpts -if "%1" EQU "--peruser" (set TESTPERUSER=1) && shift && goto CheckOpts - -if not defined TESTX86 if not defined TESTX64 (set TESTX86=1) && (set TESTX64=1) -if not defined TESTALLUSER if not defined TESTPERUSER (set TESTALLUSER=1) && (set TESTPERUSER=1) - - -if defined TESTX86 ( - for %%f in ("%PCBUILD%win32\en-us\*.exe") do ( - if defined TESTALLUSER call :test "%%~ff" "%TARGETDIR%\%%~nf-alluser" "InstallAllUsers=1 CompileAll=1" - if errorlevel 1 exit /B - if defined TESTPERUSER call :test "%%~ff" "%TARGETDIR%\%%~nf-peruser" "InstallAllUsers=0 CompileAll=0" - if errorlevel 1 exit /B - ) -) - -if defined TESTX64 ( - for %%f in ("%PCBUILD%amd64\en-us\*.exe") do ( - if defined TESTALLUSER call :test "%%~ff" "%TARGETDIR%\%%~nf-alluser" "InstallAllUsers=1 CompileAll=1" - if errorlevel 1 exit /B - if defined TESTPERUSER call :test "%%~ff" "%TARGETDIR%\%%~nf-peruser" "InstallAllUsers=0 CompileAll=0" - if errorlevel 1 exit /B - ) -) - -exit /B 0 - -:test -@setlocal -@echo on - -@if not exist "%~1" exit /B 1 - -@set EXITCODE=0 -@echo Installing %1 into %2 -"%~1" /passive /log "%~2\install\log.txt" TargetDir="%~2\Python" Include_debug=1 Include_symbols=1 %~3 - -@if not errorlevel 1 ( - @echo Printing version - "%~2\Python\python.exe" -c "import sys; print(sys.version)" > "%~2\version.txt" 2>&1 -) - -@if not errorlevel 1 ( - @echo Capturing Start Menu - @dir /s/b "%PROGRAMDATA%\Microsoft\Windows\Start Menu\Programs" | findstr /ic:"python" > "%~2\startmenu.txt" 2>&1 - @dir /s/b "%APPDATA%\Microsoft\Windows\Start Menu\Programs" | findstr /ic:"python" >> "%~2\startmenu.txt" 2>&1 - - @echo Capturing registry - @for /F "usebackq" %%f in (`reg query HKCR /s /f python /k`) do @( - echo %%f >> "%~2\hkcr.txt" - reg query "%%f" /s >> "%~2\hkcr.txt" 2>&1 - ) - @reg query HKCU\Software\Python /s > "%~2\hkcu.txt" 2>&1 - @reg query HKLM\Software\Python /reg:32 /s > "%~2\hklm.txt" 2>&1 - @reg query HKLM\Software\Python /reg:64 /s >> "%~2\hklm.txt" 2>&1 - cmd /k exit 0 -) - -@if not errorlevel 1 ( - @echo Installing package - "%~2\Python\python.exe" -m pip install "azure<0.10" > "%~2\pip.txt" 2>&1 - @if not errorlevel 1 ( - "%~2\Python\python.exe" -m pip uninstall -y azure python-dateutil six >> "%~2\pip.txt" 2>&1 - ) -) -@if not errorlevel 1 ( - @echo Testing Tcl/tk - @set TCL_LIBRARY=%~2\Python\tcl\tcl8.6 - "%~2\Python\python.exe" -m test -uall -v test_ttk_guionly test_tk test_idle > "%~2\tcltk.txt" 2>&1 - @set TCL_LIBRARY= -) - -@set EXITCODE=%ERRORLEVEL% - -@echo Result was %EXITCODE% -@echo Removing %1 -"%~1" /passive /uninstall /log "%~2\uninstall\log.txt" - -@echo off -exit /B %EXITCODE% - -:Help -echo testrelease.bat [--target TARGET] [-x86] [-x64] [--alluser] [--peruser] [-h] -echo. -echo --target (-t) Specify the target directory for installs and logs -echo -x86 Run tests for x86 installers -echo -x64 Run tests for x64 installers -echo --alluser (-a) Run tests for all-user installs (requires Administrator) -echo --peruser (-p) Run tests for per-user installs -echo -h Display this help information -echo. -echo If no test architecture is specified, all architectures will be tested. -echo If no install type is selected, all install types will be tested. -echo. +@setlocal
+@echo off
+
+set D=%~dp0
+set PCBUILD=%D%..\..\PCBuild\
+
+set TARGETDIR=%TEMP%
+set TESTX86=
+set TESTX64=
+set TESTALLUSER=
+set TESTPERUSER=
+
+:CheckOpts
+if "%1" EQU "-h" goto Help
+if "%1" EQU "-x86" (set TESTX86=1) && shift && goto CheckOpts
+if "%1" EQU "-x64" (set TESTX64=1) && shift && goto CheckOpts
+if "%1" EQU "-t" (set TARGETDIR=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "--target" (set TARGETDIR=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "-a" (set TESTALLUSER=1) && shift && goto CheckOpts
+if "%1" EQU "--alluser" (set TESTALLUSER=1) && shift && goto CheckOpts
+if "%1" EQU "-p" (set TESTPERUSER=1) && shift && goto CheckOpts
+if "%1" EQU "--peruser" (set TESTPERUSER=1) && shift && goto CheckOpts
+
+if not defined TESTX86 if not defined TESTX64 (set TESTX86=1) && (set TESTX64=1)
+if not defined TESTALLUSER if not defined TESTPERUSER (set TESTALLUSER=1) && (set TESTPERUSER=1)
+
+
+if defined TESTX86 (
+ for %%f in ("%PCBUILD%win32\en-us\*.exe") do (
+ if defined TESTALLUSER call :test "%%~ff" "%TARGETDIR%\%%~nf-alluser" "InstallAllUsers=1 CompileAll=1"
+ if errorlevel 1 exit /B
+ if defined TESTPERUSER call :test "%%~ff" "%TARGETDIR%\%%~nf-peruser" "InstallAllUsers=0 CompileAll=0"
+ if errorlevel 1 exit /B
+ )
+)
+
+if defined TESTX64 (
+ for %%f in ("%PCBUILD%amd64\en-us\*.exe") do (
+ if defined TESTALLUSER call :test "%%~ff" "%TARGETDIR%\%%~nf-alluser" "InstallAllUsers=1 CompileAll=1"
+ if errorlevel 1 exit /B
+ if defined TESTPERUSER call :test "%%~ff" "%TARGETDIR%\%%~nf-peruser" "InstallAllUsers=0 CompileAll=0"
+ if errorlevel 1 exit /B
+ )
+)
+
+exit /B 0
+
+:test
+@setlocal
+@echo on
+
+@if not exist "%~1" exit /B 1
+
+@set EXITCODE=0
+@echo Installing %1 into %2
+"%~1" /passive /log "%~2\install\log.txt" TargetDir="%~2\Python" Include_debug=1 Include_symbols=1 %~3
+
+@if not errorlevel 1 (
+ @echo Printing version
+ "%~2\Python\python.exe" -c "import sys; print(sys.version)" > "%~2\version.txt" 2>&1
+)
+
+@if not errorlevel 1 (
+ @echo Capturing Start Menu
+ @dir /s/b "%PROGRAMDATA%\Microsoft\Windows\Start Menu\Programs" | findstr /ic:"python" > "%~2\startmenu.txt" 2>&1
+ @dir /s/b "%APPDATA%\Microsoft\Windows\Start Menu\Programs" | findstr /ic:"python" >> "%~2\startmenu.txt" 2>&1
+
+ @echo Capturing registry
+ @for /F "usebackq" %%f in (`reg query HKCR /s /f python /k`) do @(
+ echo %%f >> "%~2\hkcr.txt"
+ reg query "%%f" /s >> "%~2\hkcr.txt" 2>&1
+ )
+ @reg query HKCU\Software\Python /s > "%~2\hkcu.txt" 2>&1
+ @reg query HKLM\Software\Python /reg:32 /s > "%~2\hklm.txt" 2>&1
+ @reg query HKLM\Software\Python /reg:64 /s >> "%~2\hklm.txt" 2>&1
+ cmd /k exit 0
+)
+
+@if not errorlevel 1 (
+ @echo Installing package
+ "%~2\Python\python.exe" -m pip install "azure<0.10" > "%~2\pip.txt" 2>&1
+ @if not errorlevel 1 (
+ "%~2\Python\python.exe" -m pip uninstall -y azure python-dateutil six >> "%~2\pip.txt" 2>&1
+ )
+)
+@if not errorlevel 1 (
+ @echo Testing Tcl/tk
+ @set TCL_LIBRARY=%~2\Python\tcl\tcl8.6
+ "%~2\Python\python.exe" -m test -uall -v test_ttk_guionly test_tk test_idle > "%~2\tcltk.txt" 2>&1
+ @set TCL_LIBRARY=
+)
+
+@set EXITCODE=%ERRORLEVEL%
+
+@echo Result was %EXITCODE%
+@echo Removing %1
+"%~1" /passive /uninstall /log "%~2\uninstall\log.txt"
+
+@echo off
+exit /B %EXITCODE%
+
+:Help
+echo testrelease.bat [--target TARGET] [-x86] [-x64] [--alluser] [--peruser] [-h]
+echo.
+echo --target (-t) Specify the target directory for installs and logs
+echo -x86 Run tests for x86 installers
+echo -x64 Run tests for x64 installers
+echo --alluser (-a) Run tests for all-user installs (requires Administrator)
+echo --peruser (-p) Run tests for per-user installs
+echo -h Display this help information
+echo.
+echo If no test architecture is specified, all architectures will be tested.
+echo If no install type is selected, all install types will be tested.
+echo.
diff --git a/Tools/msi/uploadrelease.bat b/Tools/msi/uploadrelease.bat index 3709196..7967637 100644 --- a/Tools/msi/uploadrelease.bat +++ b/Tools/msi/uploadrelease.bat @@ -1,56 +1,56 @@ -@setlocal -@echo off - -set D=%~dp0 -set PCBUILD=%D%..\..\PCBuild\ - -set HOST= -set USER= -set TARGET= -set DRYRUN=false - -:CheckOpts -if "%1" EQU "-h" goto Help -if "%1" EQU "-o" (set HOST=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "--host" (set HOST=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "-u" (set USER=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "--user" (set USER=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "-t" (set TARGET=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "--target" (set TARGET=%~2) && shift && shift && goto CheckOpts -if "%1" EQU "--dry-run" (set DRYRUN=true) && shift && goto CheckOpts - -if not defined PLINK where plink > "%TEMP%\plink.loc" 2> nul && set /P PLINK= < "%TEMP%\plink.loc" & del "%TEMP%\plink.loc" -if not defined PLINK where /R "%ProgramFiles(x86)%\PuTTY" plink > "%TEMP%\plink.loc" 2> nul && set /P PLINK= < "%TEMP%\plink.loc" & del "%TEMP%\plink.loc" -if not defined PLINK where /R "%ProgramFiles(x86)%" plink > "%TEMP%\plink.loc" 2> nul && set /P PLINK= < "%TEMP%\plink.loc" & del "%TEMP%\plink.loc" -if not defined PLINK echo Cannot locate plink.exe & exit /B 1 -echo Found plink.exe at %PLINK% - -if not defined PSCP where pscp > "%TEMP%\pscp.loc" 2> nul && set /P pscp= < "%TEMP%\pscp.loc" & del "%TEMP%\pscp.loc" -if not defined PSCP where /R "%ProgramFiles(x86)%\PuTTY" pscp > "%TEMP%\pscp.loc" 2> nul && set /P pscp= < "%TEMP%\pscp.loc" & del "%TEMP%\pscp.loc" -if not defined PSCP where /R "%ProgramFiles(x86)%" pscp > "%TEMP%\pscp.loc" 2> nul && set /P pscp= < "%TEMP%\pscp.loc" & del "%TEMP%\pscp.loc" -if not defined PSCP echo Cannot locate pscp.exe & exit /B 1 -echo Found pscp.exe at %PSCP% - -if not defined GPG where gpg2 > "%TEMP%\gpg.loc" 2> nul && set /P GPG= < "%TEMP%\gpg.loc" & del "%TEMP%\gpg.loc" -if not defined GPG where /R "%PCBUILD%..\externals" gpg2 > "%TEMP%\gpg.loc" 2> nul && set /P GPG= < "%TEMP%\gpg.loc" & del "%TEMP%\gpg.loc" -if not defined GPG echo Cannot locate gpg2.exe. Signatures will not be uploaded & pause -echo Found gpg2.exe at %GPG% - -call "%PCBUILD%env.bat" > nul 2> nul -pushd "%D%" -msbuild /v:m /nologo uploadrelease.proj /t:Upload /p:Platform=x86 -msbuild /v:m /nologo uploadrelease.proj /t:Upload /p:Platform=x64 /p:IncludeDoc=false -msbuild /v:m /nologo uploadrelease.proj /t:ShowHashes /p:Platform=x86 -msbuild /v:m /nologo uploadrelease.proj /t:ShowHashes /p:Platform=x64 /p:IncludeDoc=false -popd -exit /B 0 - -:Help -echo uploadrelease.bat --host HOST --user USERNAME [--target TARGET] [--dry-run] [-h] -echo. -echo --host (-o) Specify the upload host (required) -echo --user (-u) Specify the user on the host (required) -echo --target (-t) Specify the target directory on the host -echo --dry-run Display commands and filenames without executing them -echo -h Display this help information -echo. +@setlocal
+@echo off
+
+set D=%~dp0
+set PCBUILD=%D%..\..\PCBuild\
+
+set HOST=
+set USER=
+set TARGET=
+set DRYRUN=false
+
+:CheckOpts
+if "%1" EQU "-h" goto Help
+if "%1" EQU "-o" (set HOST=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "--host" (set HOST=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "-u" (set USER=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "--user" (set USER=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "-t" (set TARGET=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "--target" (set TARGET=%~2) && shift && shift && goto CheckOpts
+if "%1" EQU "--dry-run" (set DRYRUN=true) && shift && goto CheckOpts
+
+if not defined PLINK where plink > "%TEMP%\plink.loc" 2> nul && set /P PLINK= < "%TEMP%\plink.loc" & del "%TEMP%\plink.loc"
+if not defined PLINK where /R "%ProgramFiles(x86)%\PuTTY" plink > "%TEMP%\plink.loc" 2> nul && set /P PLINK= < "%TEMP%\plink.loc" & del "%TEMP%\plink.loc"
+if not defined PLINK where /R "%ProgramFiles(x86)%" plink > "%TEMP%\plink.loc" 2> nul && set /P PLINK= < "%TEMP%\plink.loc" & del "%TEMP%\plink.loc"
+if not defined PLINK echo Cannot locate plink.exe & exit /B 1
+echo Found plink.exe at %PLINK%
+
+if not defined PSCP where pscp > "%TEMP%\pscp.loc" 2> nul && set /P pscp= < "%TEMP%\pscp.loc" & del "%TEMP%\pscp.loc"
+if not defined PSCP where /R "%ProgramFiles(x86)%\PuTTY" pscp > "%TEMP%\pscp.loc" 2> nul && set /P pscp= < "%TEMP%\pscp.loc" & del "%TEMP%\pscp.loc"
+if not defined PSCP where /R "%ProgramFiles(x86)%" pscp > "%TEMP%\pscp.loc" 2> nul && set /P pscp= < "%TEMP%\pscp.loc" & del "%TEMP%\pscp.loc"
+if not defined PSCP echo Cannot locate pscp.exe & exit /B 1
+echo Found pscp.exe at %PSCP%
+
+if not defined GPG where gpg2 > "%TEMP%\gpg.loc" 2> nul && set /P GPG= < "%TEMP%\gpg.loc" & del "%TEMP%\gpg.loc"
+if not defined GPG where /R "%PCBUILD%..\externals" gpg2 > "%TEMP%\gpg.loc" 2> nul && set /P GPG= < "%TEMP%\gpg.loc" & del "%TEMP%\gpg.loc"
+if not defined GPG echo Cannot locate gpg2.exe. Signatures will not be uploaded & pause
+echo Found gpg2.exe at %GPG%
+
+call "%PCBUILD%env.bat" > nul 2> nul
+pushd "%D%"
+msbuild /v:m /nologo uploadrelease.proj /t:Upload /p:Platform=x86
+msbuild /v:m /nologo uploadrelease.proj /t:Upload /p:Platform=x64 /p:IncludeDoc=false
+msbuild /v:m /nologo uploadrelease.proj /t:ShowHashes /p:Platform=x86
+msbuild /v:m /nologo uploadrelease.proj /t:ShowHashes /p:Platform=x64 /p:IncludeDoc=false
+popd
+exit /B 0
+
+:Help
+echo uploadrelease.bat --host HOST --user USERNAME [--target TARGET] [--dry-run] [-h]
+echo.
+echo --host (-o) Specify the upload host (required)
+echo --user (-u) Specify the user on the host (required)
+echo --target (-t) Specify the target directory on the host
+echo --dry-run Display commands and filenames without executing them
+echo -h Display this help information
+echo.
diff --git a/Tools/unicode/genwincodecs.bat b/Tools/unicode/genwincodecs.bat index 43cab0d..ad45c6c 100644 --- a/Tools/unicode/genwincodecs.bat +++ b/Tools/unicode/genwincodecs.bat @@ -1,7 +1,7 @@ -@rem Recreate some python charmap codecs from the Windows function -@rem MultiByteToWideChar. - -@cd /d %~dp0 -@mkdir build -@rem Arabic DOS code page -c:\python30\python genwincodec.py 720 > build/cp720.py +@rem Recreate some python charmap codecs from the Windows function
+@rem MultiByteToWideChar.
+
+@cd /d %~dp0
+@mkdir build
+@rem Arabic DOS code page
+c:\python30\python genwincodec.py 720 > build/cp720.py
|