summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Doc/c-api/exceptions.rst16
-rw-r--r--Doc/c-api/unicode.rst18
-rw-r--r--Include/pyport.h16
-rw-r--r--Misc/NEWS3
-rw-r--r--Modules/_testcapimodule.c6
-rw-r--r--Objects/unicodeobject.c113
-rwxr-xr-xconfigure100
-rw-r--r--configure.in48
-rw-r--r--pyconfig.h.in3
9 files changed, 299 insertions, 24 deletions
diff --git a/Doc/c-api/exceptions.rst b/Doc/c-api/exceptions.rst
index 819e22e..25f7c11 100644
--- a/Doc/c-api/exceptions.rst
+++ b/Doc/c-api/exceptions.rst
@@ -155,6 +155,8 @@ in various ways. There is a separate error indicator for each thread.
.. % The descriptions for %zd and %zu are wrong, but the truth is complicated
.. % because not all compilers support the %z width modifier -- we fake it
.. % when necessary via interpolating PY_FORMAT_SIZE_T.
+ .. % Similar comments apply to the %ll width modifier and
+ .. % PY_FORMAT_LONG_LONG.
+-------------------+---------------+--------------------------------+
| Format Characters | Type | Comment |
@@ -176,6 +178,12 @@ in various ways. There is a separate error indicator for each thread.
| :attr:`%lu` | unsigned long | Exactly equivalent to |
| | | ``printf("%lu")``. |
+-------------------+---------------+--------------------------------+
+ | :attr:`%lld` | long long | Exactly equivalent to |
+ | | | ``printf("%lld")``. |
+ +-------------------+---------------+--------------------------------+
+ | :attr:`%llu` | unsigned | Exactly equivalent to |
+ | | long long | ``printf("%llu")``. |
+ +-------------------+---------------+--------------------------------+
| :attr:`%zd` | Py_ssize_t | Exactly equivalent to |
| | | ``printf("%zd")``. |
+-------------------+---------------+--------------------------------+
@@ -203,6 +211,14 @@ in various ways. There is a separate error indicator for each thread.
An unrecognized format character causes all the rest of the format string to be
copied as-is to the result string, and any extra arguments discarded.
+ .. note::
+
+ The `"%lld"` and `"%llu"` format specifiers are only available
+ when `HAVE_LONG_LONG` is defined.
+
+ .. versionchanged:: 3.2
+ Support for `"%lld"` and `"%llu"` added.
+
.. cfunction:: void PyErr_SetNone(PyObject *type)
diff --git a/Doc/c-api/unicode.rst b/Doc/c-api/unicode.rst
index 4c0d6a4..0455ae5 100644
--- a/Doc/c-api/unicode.rst
+++ b/Doc/c-api/unicode.rst
@@ -232,9 +232,12 @@ APIs:
types and must correspond exactly to the format characters in the *format*
string. The following format characters are allowed:
+ .. % This should be exactly the same as the table in PyErr_Format.
.. % The descriptions for %zd and %zu are wrong, but the truth is complicated
.. % because not all compilers support the %z width modifier -- we fake it
.. % when necessary via interpolating PY_FORMAT_SIZE_T.
+ .. % Similar comments apply to the %ll width modifier and
+ .. % PY_FORMAT_LONG_LONG.
+-------------------+---------------------+--------------------------------+
| Format Characters | Type | Comment |
@@ -256,6 +259,12 @@ APIs:
| :attr:`%lu` | unsigned long | Exactly equivalent to |
| | | ``printf("%lu")``. |
+-------------------+---------------------+--------------------------------+
+ | :attr:`%lld` | long long | Exactly equivalent to |
+ | | | ``printf("%lld")``. |
+ +-------------------+---------------------+--------------------------------+
+ | :attr:`%llu` | unsigned long long | Exactly equivalent to |
+ | | | ``printf("%llu")``. |
+ +-------------------+---------------------+--------------------------------+
| :attr:`%zd` | Py_ssize_t | Exactly equivalent to |
| | | ``printf("%zd")``. |
+-------------------+---------------------+--------------------------------+
@@ -301,6 +310,15 @@ APIs:
An unrecognized format character causes all the rest of the format string to be
copied as-is to the result string, and any extra arguments discarded.
+ .. note::
+
+ The `"%lld"` and `"%llu"` format specifiers are only available
+ when `HAVE_LONG_LONG` is defined.
+
+ .. versionchanged:: 3.2
+ Support for `"%lld"` and `"%llu"` added.
+
+
.. cfunction:: PyObject* PyUnicode_FromFormatV(const char *format, va_list vargs)
diff --git a/Include/pyport.h b/Include/pyport.h
index be15fe1..1adb5f0 100644
--- a/Include/pyport.h
+++ b/Include/pyport.h
@@ -219,6 +219,22 @@ typedef Py_intptr_t Py_ssize_t;
# endif
#endif
+/* PY_FORMAT_LONG_LONG is analogous to PY_FORMAT_SIZE_T above, but for
+ * the long long type instead of the size_t type. It's only available
+ * when HAVE_LONG_LONG is defined. The "high level" Python format
+ * functions listed above will interpret "lld" or "llu" correctly on
+ * all platforms.
+ */
+#ifdef HAVE_LONG_LONG
+# ifndef PY_FORMAT_LONG_LONG
+# if defined(MS_WIN64) || defined(MS_WINDOWS)
+# define PY_FORMAT_LONG_LONG "I64"
+# else
+# error "This platform's pyconfig.h needs to define PY_FORMAT_LONG_LONG"
+# endif
+# endif
+#endif
+
/* Py_LOCAL can be used instead of static to get the fastest possible calling
* convention for functions that are local to a given module.
*
diff --git a/Misc/NEWS b/Misc/NEWS
index 289a64c..42d1d46 100644
--- a/Misc/NEWS
+++ b/Misc/NEWS
@@ -110,6 +110,9 @@ Core and Builtins
C-API
-----
+- Issue #Add '%lld' and '%llu' support to PyString_FromFormat(V)
+ and PyErr_Format, on machines with HAVE_LONG_LONG defined.
+
- Issue #6151: Made PyDescr_COMMON conform to standard C (like PyObject_HEAD
in PEP 3123). The PyDescr_TYPE and PyDescr_NAME macros should be
should used for accessing the d_type and d_name members of structures
diff --git a/Modules/_testcapimodule.c b/Modules/_testcapimodule.c
index 7e0e95c..0ed2111 100644
--- a/Modules/_testcapimodule.c
+++ b/Modules/_testcapimodule.c
@@ -1037,6 +1037,12 @@ test_string_from_format(PyObject *self, PyObject *args)
CHECK_1_FORMAT("%lu", unsigned long);
CHECK_1_FORMAT("%zu", size_t);
+ /* "%lld" and "%llu" support added in Python 2.7. */
+#ifdef HAVE_LONG_LONG
+ CHECK_1_FORMAT("%llu", unsigned PY_LONG_LONG);
+ CHECK_1_FORMAT("%lld", PY_LONG_LONG);
+#endif
+
Py_RETURN_NONE;
Fail:
diff --git a/Objects/unicodeobject.c b/Objects/unicodeobject.c
index cdb739a..9c0be9b 100644
--- a/Objects/unicodeobject.c
+++ b/Objects/unicodeobject.c
@@ -667,7 +667,8 @@ PyObject *PyUnicode_FromWideChar(register const wchar_t *w,
#undef CONVERT_WCHAR_TO_SURROGATES
static void
-makefmt(char *fmt, int longflag, int size_tflag, int zeropad, int width, int precision, char c)
+makefmt(char *fmt, int longflag, int longlongflag, int size_tflag,
+ int zeropad, int width, int precision, char c)
{
*fmt++ = '%';
if (width) {
@@ -679,6 +680,19 @@ makefmt(char *fmt, int longflag, int size_tflag, int zeropad, int width, int pre
fmt += sprintf(fmt, ".%d", precision);
if (longflag)
*fmt++ = 'l';
+ else if (longlongflag) {
+ /* longlongflag should only ever be nonzero on machines with
+ HAVE_LONG_LONG defined */
+#ifdef HAVE_LONG_LONG
+ char *f = PY_FORMAT_LONG_LONG;
+ while (*f)
+ *fmt++ = *f++;
+#else
+ /* we shouldn't ever get here */
+ assert(0);
+ *fmt++ = 'l';
+#endif
+ }
else if (size_tflag) {
char *f = PY_FORMAT_SIZE_T;
while (*f)
@@ -690,6 +704,16 @@ makefmt(char *fmt, int longflag, int size_tflag, int zeropad, int width, int pre
#define appendstring(string) {for (copy = string;*copy;) *s++ = *copy++;}
+/* size of fixed-size buffer for formatting single arguments */
+#define ITEM_BUFFER_LEN 21
+/* maximum number of characters required for output of %ld. 21 characters
+ allows for 64-bit integers (in decimal) and an optional sign. */
+#define MAX_LONG_CHARS 21
+/* maximum number of characters required for output of %lld.
+ We need at most ceil(log10(256)*SIZEOF_LONG_LONG) digits,
+ plus 1 for the sign. 53/22 is an upper bound for log10(256). */
+#define MAX_LONG_LONG_CHARS (2 + (SIZEOF_LONG_LONG*53-1) / 22)
+
PyObject *
PyUnicode_FromFormatV(const char *format, va_list vargs)
{
@@ -705,13 +729,13 @@ PyUnicode_FromFormatV(const char *format, va_list vargs)
Py_UNICODE *s;
PyObject *string;
/* used by sprintf */
- char buffer[21];
+ char buffer[ITEM_BUFFER_LEN+1];
/* use abuffer instead of buffer, if we need more space
* (which can happen if there's a format specifier with width). */
char *abuffer = NULL;
char *realbuffer;
Py_ssize_t abuffersize = 0;
- char fmt[60]; /* should be enough for %0width.precisionld */
+ char fmt[61]; /* should be enough for %0width.precisionlld */
const char *copy;
#ifdef VA_LIST_IS_ARRAY
@@ -754,6 +778,9 @@ PyUnicode_FromFormatV(const char *format, va_list vargs)
/* step 3: figure out how large a buffer we need */
for (f = format; *f; f++) {
if (*f == '%') {
+#ifdef HAVE_LONG_LONG
+ int longlongflag = 0;
+#endif
const char* p = f;
width = 0;
while (ISDIGIT((unsigned)*f))
@@ -764,9 +791,21 @@ PyUnicode_FromFormatV(const char *format, va_list vargs)
/* skip the 'l' or 'z' in {%ld, %zd, %lu, %zu} since
* they don't affect the amount of space we reserve.
*/
- if ((*f == 'l' || *f == 'z') &&
- (f[1] == 'd' || f[1] == 'u'))
+ if (*f == 'l') {
+ if (f[1] == 'd' || f[1] == 'u') {
+ ++f;
+ }
+#ifdef HAVE_LONG_LONG
+ else if (f[1] == 'l' &&
+ (f[2] == 'd' || f[2] == 'u')) {
+ longlongflag = 1;
+ f += 2;
+ }
+#endif
+ }
+ else if (*f == 'z' && (f[1] == 'd' || f[1] == 'u')) {
++f;
+ }
switch (*f) {
case 'c':
@@ -777,14 +816,21 @@ PyUnicode_FromFormatV(const char *format, va_list vargs)
break;
case 'd': case 'u': case 'i': case 'x':
(void) va_arg(count, int);
- /* 20 bytes is enough to hold a 64-bit
- integer. Decimal takes the most space.
- This isn't enough for octal.
- If a width is specified we need more
- (which we allocate later). */
- if (width < 20)
- width = 20;
+#ifdef HAVE_LONG_LONG
+ if (longlongflag) {
+ if (width < MAX_LONG_LONG_CHARS)
+ width = MAX_LONG_LONG_CHARS;
+ }
+ else
+#endif
+ /* MAX_LONG_CHARS is enough to hold a 64-bit integer,
+ including sign. Decimal takes the most space. This
+ isn't enough for octal. If a width is specified we
+ need more (which we allocate later). */
+ if (width < MAX_LONG_CHARS)
+ width = MAX_LONG_CHARS;
n += width;
+ /* XXX should allow for large precision here too. */
if (abuffersize < width)
abuffersize = width;
break;
@@ -881,8 +927,9 @@ PyUnicode_FromFormatV(const char *format, va_list vargs)
n++;
}
expand:
- if (abuffersize > 20) {
- abuffer = PyObject_Malloc(abuffersize);
+ if (abuffersize > ITEM_BUFFER_LEN) {
+ /* add 1 for sprintf's trailing null byte */
+ abuffer = PyObject_Malloc(abuffersize + 1);
if (!abuffer) {
PyErr_NoMemory();
goto fail;
@@ -906,6 +953,7 @@ PyUnicode_FromFormatV(const char *format, va_list vargs)
if (*f == '%') {
const char* p = f++;
int longflag = 0;
+ int longlongflag = 0;
int size_tflag = 0;
zeropad = (*f == '0');
/* parse the width.precision part */
@@ -918,11 +966,19 @@ PyUnicode_FromFormatV(const char *format, va_list vargs)
while (ISDIGIT((unsigned)*f))
precision = (precision*10) + *f++ - '0';
}
- /* handle the long flag, but only for %ld and %lu.
- others can be added when necessary. */
- if (*f == 'l' && (f[1] == 'd' || f[1] == 'u')) {
- longflag = 1;
- ++f;
+ /* Handle %ld, %lu, %lld and %llu. */
+ if (*f == 'l') {
+ if (f[1] == 'd' || f[1] == 'u') {
+ longflag = 1;
+ ++f;
+ }
+#ifdef HAVE_LONG_LONG
+ else if (f[1] == 'l' &&
+ (f[2] == 'd' || f[2] == 'u')) {
+ longlongflag = 1;
+ f += 2;
+ }
+#endif
}
/* handle the size_t flag. */
if (*f == 'z' && (f[1] == 'd' || f[1] == 'u')) {
@@ -935,9 +991,14 @@ PyUnicode_FromFormatV(const char *format, va_list vargs)
*s++ = va_arg(vargs, int);
break;
case 'd':
- makefmt(fmt, longflag, size_tflag, zeropad, width, precision, 'd');
+ makefmt(fmt, longflag, longlongflag, size_tflag, zeropad,
+ width, precision, 'd');
if (longflag)
sprintf(realbuffer, fmt, va_arg(vargs, long));
+#ifdef HAVE_LONG_LONG
+ else if (longlongflag)
+ sprintf(realbuffer, fmt, va_arg(vargs, PY_LONG_LONG));
+#endif
else if (size_tflag)
sprintf(realbuffer, fmt, va_arg(vargs, Py_ssize_t));
else
@@ -945,9 +1006,15 @@ PyUnicode_FromFormatV(const char *format, va_list vargs)
appendstring(realbuffer);
break;
case 'u':
- makefmt(fmt, longflag, size_tflag, zeropad, width, precision, 'u');
+ makefmt(fmt, longflag, longlongflag, size_tflag, zeropad,
+ width, precision, 'u');
if (longflag)
sprintf(realbuffer, fmt, va_arg(vargs, unsigned long));
+#ifdef HAVE_LONG_LONG
+ else if (longlongflag)
+ sprintf(realbuffer, fmt, va_arg(vargs,
+ unsigned PY_LONG_LONG));
+#endif
else if (size_tflag)
sprintf(realbuffer, fmt, va_arg(vargs, size_t));
else
@@ -955,12 +1022,12 @@ PyUnicode_FromFormatV(const char *format, va_list vargs)
appendstring(realbuffer);
break;
case 'i':
- makefmt(fmt, 0, 0, zeropad, width, precision, 'i');
+ makefmt(fmt, 0, 0, 0, zeropad, width, precision, 'i');
sprintf(realbuffer, fmt, va_arg(vargs, int));
appendstring(realbuffer);
break;
case 'x':
- makefmt(fmt, 0, 0, zeropad, width, precision, 'x');
+ makefmt(fmt, 0, 0, 0, zeropad, width, precision, 'x');
sprintf(realbuffer, fmt, va_arg(vargs, int));
appendstring(realbuffer);
break;
diff --git a/configure b/configure
index 188435b..d0b0869 100755
--- a/configure
+++ b/configure
@@ -1,5 +1,5 @@
#! /bin/sh
-# From configure.in Revision: 76030 .
+# From configure.in Revision: 76301 .
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.61 for python 3.2.
#
@@ -26314,6 +26314,104 @@ else
echo "${ECHO_T}no" >&6; }
fi
+if test "$have_long_long" = yes
+then
+ { echo "$as_me:$LINENO: checking for %lld and %llu printf() format support" >&5
+echo $ECHO_N "checking for %lld and %llu printf() format support... $ECHO_C" >&6; }
+ if test "${ac_cv_have_long_long_format+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_have_long_long_format=no
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ #include <stdio.h>
+ #include <stddef.h>
+ #include <string.h>
+
+ #ifdef HAVE_SYS_TYPES_H
+ #include <sys/types.h>
+ #endif
+
+ int main()
+ {
+ char buffer[256];
+
+ if (sprintf(buffer, "%lld", (long long)123) < 0)
+ return 1;
+ if (strcmp(buffer, "123"))
+ return 1;
+
+ if (sprintf(buffer, "%lld", (long long)-123) < 0)
+ return 1;
+ if (strcmp(buffer, "-123"))
+ return 1;
+
+ if (sprintf(buffer, "%llu", (unsigned long long)123) < 0)
+ return 1;
+ if (strcmp(buffer, "123"))
+ return 1;
+
+ return 0;
+ }
+
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_have_long_long_format=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_have_long_long_format=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+
+fi
+
+ { echo "$as_me:$LINENO: result: $ac_cv_have_long_long_format" >&5
+echo "${ECHO_T}$ac_cv_have_long_long_format" >&6; }
+fi
+
+if test $ac_cv_have_long_long_format = yes
+then
+
+cat >>confdefs.h <<\_ACEOF
+#define PY_FORMAT_LONG_LONG "ll"
+_ACEOF
+
+fi
+
+
{ echo "$as_me:$LINENO: checking for %zd printf() format support" >&5
echo $ECHO_N "checking for %zd printf() format support... $ECHO_C" >&6; }
if test "${ac_cv_have_size_t_format+set}" = set; then
diff --git a/configure.in b/configure.in
index 4a0bf68..2a0745f 100644
--- a/configure.in
+++ b/configure.in
@@ -3806,6 +3806,54 @@ else
AC_MSG_RESULT(no)
fi
+if test "$have_long_long" = yes
+then
+ AC_MSG_CHECKING(for %lld and %llu printf() format support)
+ AC_CACHE_VAL(ac_cv_have_long_long_format,
+ AC_TRY_RUN([[
+ #include <stdio.h>
+ #include <stddef.h>
+ #include <string.h>
+
+ #ifdef HAVE_SYS_TYPES_H
+ #include <sys/types.h>
+ #endif
+
+ int main()
+ {
+ char buffer[256];
+
+ if (sprintf(buffer, "%lld", (long long)123) < 0)
+ return 1;
+ if (strcmp(buffer, "123"))
+ return 1;
+
+ if (sprintf(buffer, "%lld", (long long)-123) < 0)
+ return 1;
+ if (strcmp(buffer, "-123"))
+ return 1;
+
+ if (sprintf(buffer, "%llu", (unsigned long long)123) < 0)
+ return 1;
+ if (strcmp(buffer, "123"))
+ return 1;
+
+ return 0;
+ }
+ ]], ac_cv_have_long_long_format=yes,
+ ac_cv_have_long_long_format=no,
+ ac_cv_have_long_long_format=no)
+ )
+ AC_MSG_RESULT($ac_cv_have_long_long_format)
+fi
+
+if test $ac_cv_have_long_long_format = yes
+then
+ AC_DEFINE(PY_FORMAT_LONG_LONG, "ll",
+ [Define to printf format modifier for long long type])
+fi
+
+
AC_MSG_CHECKING(for %zd printf() format support)
AC_CACHE_VAL(ac_cv_have_size_t_format,
AC_TRY_RUN([[
diff --git a/pyconfig.h.in b/pyconfig.h.in
index 9df729a..223c996 100644
--- a/pyconfig.h.in
+++ b/pyconfig.h.in
@@ -910,6 +910,9 @@
/* Define as the preferred size in bits of long digits */
#undef PYLONG_BITS_IN_DIGIT
+/* Define to printf format modifier for long long type */
+#undef PY_FORMAT_LONG_LONG
+
/* Define to printf format modifier for Py_ssize_t */
#undef PY_FORMAT_SIZE_T