diff options
| -rw-r--r-- | Modules/Setup.dist | 370 |
1 files changed, 368 insertions, 2 deletions
diff --git a/Modules/Setup.dist b/Modules/Setup.dist index d1fb695..ea76938 100644 --- a/Modules/Setup.dist +++ b/Modules/Setup.dist @@ -80,6 +80,7 @@ TESTPATH= MACHDEPPATH=:plat-$(MACHDEP) # Path component for the Tkinter-related modules +# The TKPATH variable is always enabled, to save you the effort. TKPATH=:lib-tk COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(TKPATH) @@ -99,5 +100,370 @@ _sre _sre.c # Fredrik Lundh's new regular expressions # The signal module can't be compiled as a dynamically linked module. signal signalmodule.c # signal(2) -# The rest of the modules previously listed in this file are built -# by the setup.py script in Python 2.1. +# The rest of the modules listed in this file are all commented out by +# default. Usually they can be detected and built as dynamically +# loaded modules by the new setup.py script added in Python 2.1. If +# you're on a platform that doesn't support dynamic loading, want to +# compile modules statically into the Python binary, or need to +# specify some odd set of compiler switches, you can uncomment the +# appropriate lines below. + +# ====================================================================== + +# The SGI specific GL module: + +GLHACK=-Dclear=__GLclear +#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11 + +# Pure module. Cannot be linked dynamically. +# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE +#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE +#PURE_INCLS=-I/usr/local/include +#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs +#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS) + +# Uncommenting the following line tells makesetup that all following +# modules are to be built as shared libraries (see above for more +# detail; also note that *static* reverses this effect): + +#*shared* + +# GNU readline. Unlike previous Python incarnations, GNU readline is +# now incorporated in an optional module, configured in the Setup file +# instead of by a configure script switch. You may have to insert a +# -L option pointing to the directory where libreadline.* lives, +# and you may have to change -ltermcap to -ltermlib or perhaps remove +# it, depending on your system -- see the GNU readline instructions. +# It's okay for this to be a shared library, too. + +#readline readline.c -lreadline -ltermcap + + +# Modules that should always be present (non UNIX dependent): + +#array arraymodule.c # array objects +#cmath cmathmodule.c # -lm # complex math library functions +#math mathmodule.c # -lm # math library functions, e.g. sin() +#struct structmodule.c # binary structure packing/unpacking +#time timemodule.c # -lm # time operations and variables +#operator operator.c # operator.add() and similar goodies +#_codecs _codecsmodule.c # access to the builtin codecs and codec registry + +#unicodedata unicodedata.c unicodedatabase.c + # static Unicode character database +#ucnhash ucnhash.c # Unicode Character Name expansion hash table + +#_locale _localemodule.c # access to ISO C locale support + + +# Modules with some UNIX dependencies -- on by default: +# (If you have a really backward UNIX, select and socket may not be +# supported...) + +#fcntl fcntlmodule.c # fcntl(2) and ioctl(2) +#pwd pwdmodule.c # pwd(3) +#grp grpmodule.c # grp(3) +#errno errnomodule.c # posix (UNIX) errno values +#select selectmodule.c # select(2); not on ancient System V + +# Memory-mapped files (also works on Win32). +#mmap mmapmodule.c + +# Dynamic readlines +#xreadlines xreadlinesmodule.c + +# for socket(2), without SSL support. +#_socket socketmodule.c + +# Socket module compiled with SSL support; you must comment out the other +# socket line above, and possibly edit the SSL variable: +#SSL=/usr/local/ssl +#_socket socketmodule.c \ +# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \ +# -L$(SSL)/lib -lssl -lcrypto + +# The crypt module is now disabled by default because it breaks builds +# on many systems (where -lcrypt is needed), e.g. Linux (I believe). +# +# First, look at Setup.config; configure may have set this for you. + +#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems + + +# Some more UNIX dependent modules -- off by default, since these +# are not supported by all UNIX systems: + +#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere +#termios termios.c # Steen Lumholt's termios module +#resource resource.c # Jeremy Hylton's rlimit interface + + +# Multimedia modules -- off by default. +# These don't work for 64-bit platforms!!! +# These represent audio samples or images as strings: + +#audioop audioop.c # Operations on audio samples +#imageop imageop.c # Operations on images +#rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably) + + +# The md5 module implements the RSA Data Security, Inc. MD5 +# Message-Digest Algorithm, described in RFC 1321. The necessary files +# md5c.c and md5.h are included here. + +#md5 md5module.c md5c.c + + +# The sha module implements the SHA checksum algorithm. +# (NIST's Secure Hash Algorithm.) +#sha shamodule.c + + +# The mpz module interfaces to the GNU Multiple Precision library. +# You need to ftp the GNU MP library. +# The GMP variable must point to the GMP source directory. +# This was originally written and tested against GMP 1.2 and 1.3.2. +# It has been modified by Rob Hooft to work with 2.0.2 as well, but I +# haven't tested it recently. + +# A compatible MP library unencombered by the GPL also exists. It was +# posted to comp.sources.misc in volume 40 and is widely available from +# FTP archive sites. One URL for it is: +# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z + +#GMP=/ufs/guido/src/gmp +#mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a + + +# SGI IRIX specific modules -- off by default. + +# These module work on any SGI machine: + +# *** gl must be enabled higher up in this file *** +#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager +#sgi sgimodule.c # sgi.nap() and a few more + +# This module requires the header file +# /usr/people/4Dgifts/iristools/include/izoom.h: +#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities + + +# These modules require the Multimedia Development Option (I think): + +#al almodule.c -laudio # Audio Library +#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library +#cl clmodule.c -lcl -lawareaudio # Compression Library +#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video + + +# The FORMS library, by Mark Overmars, implements user interface +# components such as dialogs and buttons using SGI's GL and FM +# libraries. You must ftp the FORMS library separately from +# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a. +# NOTE: if you want to be able to use FORMS and curses simultaneously +# (or both link them statically into the same binary), you must +# compile all of FORMS with the cc option "-Dclear=__GLclear". + +# The FORMS variable must point to the FORMS subdirectory of the forms +# toplevel directory: + +#FORMS=/ufs/guido/src/forms/FORMS +#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl + + +# SunOS specific modules -- off by default: + +#sunaudiodev sunaudiodev.c + + +# Linux specific modules -- off by default: + +#linuxaudiodev linuxaudiodev.c + + +# George Neville-Neil's timing module: + +#timing timingmodule.c + + +# The _tkinter module. +# +# The command for _tkinter is long and site specific. Please +# uncomment and/or edit those parts as indicated. If you don't have a +# specific extension (e.g. Tix or BLT), leave the corresponding line +# commented out. (Leave the trailing backslashes in! If you +# experience strange errors, you may want to join all uncommented +# lines and remove the backslashes -- the backslash interpretation is +# done by the shell's "read" command and it may not be implemented on +# every system. + +# *** Always uncomment this (leave the leading underscore in!): +# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \ +# *** Uncomment and edit to reflect where your Tcl/Tk headers are: +# -I/usr/local/include \ +# *** Uncomment and edit to reflect where your X11 header files are: +# -I/usr/X11R6/include \ +# *** Or uncomment this for Solaris: +# -I/usr/openwin/include \ +# *** Uncomment and edit for Tix extension only: +# -DWITH_TIX -ltix4.1.8.0 \ +# *** Uncomment and edit for BLT extension only: +# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \ +# *** Uncomment and edit for PIL (TkImaging) extension only: +# (See http://www.pythonware.com/products/pil/ for more info) +# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \ +# *** Uncomment and edit for TOGL extension only: +# -DWITH_TOGL togl.c \ +# *** Uncomment and edit to reflect where your Tcl/Tk libraries are: +# -L/usr/local/lib \ +# *** Uncomment and edit to reflect your Tcl/Tk versions: +# -ltk8.0 -ltcl8.0 \ +# *** Uncomment and edit to reflect where your X11 libraries are: +# -L/usr/X11R6/lib \ +# *** Or uncomment this for Solaris: +# -L/usr/openwin/lib \ +# *** Uncomment these for TOGL extension only: +# -lGL -lGLU -lXext -lXmu \ +# *** Uncomment for AIX: +# -lld \ +# *** Always uncomment this; X11 libraries to link with: +# -lX11 + +# Lance Ellinghaus's modules: + +#rotor rotormodule.c # enigma-inspired encryption +#syslog syslogmodule.c # syslog daemon interface + + +# Curses support, requring the System V version of curses, often +# provided by the ncurses library. e.g. on Linux, link with -lncurses +# instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include +# -L/usr/5lib before -lcurses). +# +# First, look at Setup.config; configure may have set this for you. + +#_curses _cursesmodule.c -lcurses -ltermcap +# Wrapper for the panel library that's part of ncurses and SYSV curses. +#_curses_panel _curses_panel.c -lpanel -lncurses + + +# Tommy Burnette's 'new' module (creates new empty objects of certain kinds): + +#new newmodule.c + + +# Generic (SunOS / SVR4) dynamic loading module. +# This is not needed for dynamic loading of Python modules -- +# it is a highly experimental and dangerous device for calling +# *arbitrary* C functions in *arbitrary* shared libraries: + +#dl dlmodule.c + + +# Modules that provide persistent dictionary-like semantics. You will +# probably want to arrange for at least one of them to be available on +# your machine, though none are defined by default because of library +# dependencies. The Python module anydbm.py provides an +# implementation independent wrapper for these; dumbdbm.py provides +# similar functionality (but slower of course) implemented in Python. + +# The standard Unix dbm module has been moved to Setup.config so that +# it will be compiled as a shared library by default. Compiling it as +# a built-in module causes conflicts with the pybsddb3 module since it +# creates a static dependency on an out-of-date version of db.so. +# +# First, look at Setup.config; configure may have set this for you. + +#dbm dbmmodule.c # dbm(3) may require -lndbm or similar + +# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm: +# +# First, look at Setup.config; configure may have set this for you. + +#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm + + +# Berkeley DB interface. +# +# This requires the Berkeley DB code, see +# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz +# +# Edit the variables DB and DBPORT to point to the db top directory +# and the subdirectory of PORT where you built it. +# +# (See http://electricrain.com/greg/python/bsddb3/ for an interface to +# BSD DB 3.x.) + +# Note: If a db.h file is found by configure, bsddb will be enabled +# automatically via Setup.config.in. It only needs to be enabled here +# if it is not automatically enabled there; check the generated +# Setup.config before enabling it here. + +#DB=/depot/sundry/src/berkeley-db/db.1.85 +#DBPORT=$(DB)/PORT/irix.5.3 +#bsddb bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a + + + +# David Wayne Williams' soundex module (obsolete -- this will disappear!) +#soundex soundex.c + +# Helper module for various ascii-encoders +#binascii binascii.c + +# Fred Drake's interface to the Python parser +#parser parsermodule.c + +# Digital Creations' cStringIO and cPickle +#cStringIO cStringIO.c +#cPickle cPickle.c + + +# Lee Busby's SIGFPE modules. +# The library to link fpectl with is platform specific. +# Choose *one* of the options below for fpectl: + +# For SGI IRIX (tested on 5.3): +#fpectl fpectlmodule.c -lfpe + +# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2): +# (Without the compiler you don't have -lsunmath.) +#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm + +# For other systems: see instructions in fpectlmodule.c. +#fpectl fpectlmodule.c ... + +# Test module for fpectl. No extra libraries needed. +#fpetest fpetestmodule.c + +# Andrew Kuchling's zlib module. +# This require zlib 1.1.3 (or later). +# See http://www.cdrom.com/pub/infozip/zlib/ +#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz + +# Interface to the Expat XML parser +# +# Expat is written by James Clark and must be downloaded separately +# (see below). The pyexpat module was written by Paul Prescod after a +# prototype by Jack Jansen. +# +# The Expat dist includes Windows .lib and .dll files. Home page is at +# http://www.jclark.com/xml/expat.html, the current production release is +# always ftp://ftp.jclark.com/pub/xml/expat.zip. +# +# EXPAT_DIR, below, should point to the expat/ directory created by +# unpacking the Expat source distribution. +# +# Note: the expat build process doesn't yet build a libexpat.a; you can +# do this manually while we try convince the author to add it. To do so, +# cd to EXPAT_DIR, run "make" if you have not done so, then run: +# +# ar cr libexpat.a xmltok/*.o xmlparse/*.o +# +#EXPAT_DIR=/usr/local/src/expat +#pyexpat pyexpat.c -I$(EXPAT_DIR)/xmlparse -L$(EXPAT_DIR) -lexpat + + +# Example -- included for reference only: +# xx xxmodule.c + |