diff options
| -rw-r--r-- | PC/setup_nt/readme.txt | 49 | ||||
| -rw-r--r-- | PC/setup_nt/setup.bat | 1 | ||||
| -rw-r--r-- | PC/setup_nt/setup.py | 254 |
3 files changed, 304 insertions, 0 deletions
diff --git a/PC/setup_nt/readme.txt b/PC/setup_nt/readme.txt new file mode 100644 index 0000000..4b9bccc --- /dev/null +++ b/PC/setup_nt/readme.txt @@ -0,0 +1,49 @@ +Python 1.4beta3 for Windows NT 3.5 +================================== + +The zip file pyth14b3.zip contains a preliminary binary release of +Python 1.4beta3 for Windows NT 3.5, with Tcl/Tk support. The +installation has not been tested on Windows '95 or Windows 3.1 with +Win32s. For general information on Python, see http://www.python.org/. + +To install: + +Unzip the archive in the root of a file system with enough space. It +will create a directory \Python1.4b3 containing subdirectories Bin and +Lib and files setup.bat and setup.py. (If you don't have a zip +program that supports long filenames, get the file winzip95.exe and +install it -- this is WinZip 6.1 for 32-bit Windows systems.) + +Run the SETUP.BAT file found in directory just created. When it is +done, press Enter. + +To use: + +Python runs in a console (DOS) window. From the File Manager, run the +file python.exe found in the Bin subdirectory. You can also drag it +to a program group of your choice for easier access. Opening any file +ending in .py from the file manager should run it. + +To use with Tkinter: + +Get the file win41p1.exe from here or from ftp site ftp.sunlabs.com, +directory /pub/tcl/. This is a self-extracting archive containing the +Tcl/Tk distribution for Windows NT. Don't use an older version. + +Using the control panel, set the TCL_LIBRARY and TK_LIBRARY +environment variables. E.g. if you installed Tcl/Tk in C:\TCL (the +default suggested by the installer), set TCL_LIBRARY to +"C:\TCL\lib\tcl7.5" and set TK_LIBRARY to "C:\TCL\lib\tk4.1". + +Once Tcl/Tk is installed, you should be able to type the following +commands in Python: + + >>> import Tkinter + >>> Tkinter._test() + +This creates a simple test dialog box (you may have to move the Python +window a bit to see it). Click on OK to get the Python prompt back. + +August 30, 1996 + +--Guido van Rossum (home page: http://www.python.org/~guido/) diff --git a/PC/setup_nt/setup.bat b/PC/setup_nt/setup.bat new file mode 100644 index 0000000..2c6effc --- /dev/null +++ b/PC/setup_nt/setup.bat @@ -0,0 +1 @@ +bin\python.exe -i .\setup.py diff --git a/PC/setup_nt/setup.py b/PC/setup_nt/setup.py new file mode 100644 index 0000000..3f8b117 --- /dev/null +++ b/PC/setup_nt/setup.py @@ -0,0 +1,254 @@ +"""Setup script for Windows NT 3.5 until we have a proper installer. + +Run this with the current directory set to the Python ``root''. +""" + +import sys +import strop + +del sys.path[1:] + +try: + import nt +except ImportError: + print "This script should only be run on a Windows (NT or '95) system." + sys.exit(1) + +try: + sys.winver + print "This Python version appears to be", sys.winver +except NameError: + print "Huh? sys.winver is not defined!" + sys.exit(1) + +# Try to import a common module that *should* work. +print "Looking for Python root directory..." +while 1: + pwd = nt.getcwd() + ##print "Could it be", `pwd`, "?" + try: + open("Lib\\os.py").close() + ##print "It appears so." + break + except IOError: + ##print "Hm, it doesn't appear to be. Try the parent directory." + try: + opwd = pwd + nt.chdir("..") + pwd = nt.getcwd() + if opwd == pwd: + ##print "Seems like we're in the root already." + raise nt.error + except nt.error: + ##print "Can't chdir to the parent -- we're stuck." + pass + else: + ##print "Try again one level higher." + continue + print "Hey, would you like to help?" + print "Please enter the pathname of the Python root." + while 1: + try: + dirname = raw_input("Python root: ") + except EOFError: + print "OK, I give up." + sys.exit(1) + if not dirname: + continue + try: + nt.chdir(dirname) + except nt.error: + print "That directory doesn't seem to exist." + print "Please try again." + else: + break +pwd = nt.getcwd() +print "Python root directory is", pwd +sys.path[1:] = [".\\Lib", ".\\Lib\win", ".\\Bin", ".\\vc40"] + +# Now we should be in a position to import win32api and win32con + +try: + import win32api +except ImportError: + print "Blech. We *still* can't import win32api." + print "Giving up." + sys.exit(1) +try: + import win32con +except ImportError: + print "Beh. We have win32api but not win32con." + print "Making do with a dummy." + class win32con: + REG_NOTIFY_CHANGE_ATTRIBUTES = 0x00000002L + REG_NOTIFY_CHANGE_SECURITY = 0x00000008L + REG_RESOURCE_REQUIREMENTS_LIST = 10 + REG_NONE = 0 + REG_SZ = 1 + REG_EXPAND_SZ = 2 + REG_BINARY = 3 + REG_DWORD = 4 + REG_DWORD_LITTLE_ENDIAN = 4 + REG_DWORD_BIG_ENDIAN = 5 + REG_LINK = 6 + REG_MULTI_SZ = 7 + REG_RESOURCE_LIST = 8 + REG_FULL_RESOURCE_DESCRIPTOR = 9 + HKEY_CLASSES_ROOT = 0x80000000 + HKEY_CURRENT_USER = 0x80000001 + HKEY_LOCAL_MACHINE = 0x80000002 + HKEY_USERS = 0x80000003 + HKEY_PERFORMANCE_DATA = 0x80000004 + HKEY_PERFORMANCE_TEXT = 0x80000050 + HKEY_PERFORMANCE_NLSTEXT = 0x80000060 + + +def listtree(handle, level=0): + i = 0 + while 1: + try: + key = win32api.RegEnumKey(handle, i) + except win32api.error: + break + try: + value = win32api.RegQueryValue(handle, key) + except win32api.error, msg: + try: + msg = msg[2] + except: + pass + value = "*** Error: %s" % str(msg) + print " "*level + "%s: %s" % (key, value) + subhandle = win32api.RegOpenKey(handle, key) + listtree(subhandle, level+1) + win32api.RegCloseKey(subhandle) + i = i+1 + +roothandle = win32con.HKEY_LOCAL_MACHINE +pythonkey = "Software\\Python" +try: + pythonhandle = win32api.RegOpenKey(roothandle, pythonkey) +except win32api.error: + pythonhandle = win32api.RegCreateKey(roothandle, pythonkey) + +## listtree(pythonhandle) +## try: +## handle = win32api.RegOpenKey(pythonhandle, "JustTesting") +## except win32api.error, msg: +## try: msg = msg[2] +## except: pass +## ##print "Error opening, try creating instead:", msg +## handle = win32api.RegCreateKey(pythonhandle, "JustTesting") +## win32api.RegSetValue(handle, "test1", win32con.REG_SZ, "NO!") +## win32api.RegSetValue(handle, "test2", win32con.REG_SZ, "YES!") +## win32api.RegDeleteKey(handle, "test1") +## win32api.RegDeleteKey(handle, "test2") +## win32api.RegCloseKey(handle) +## win32api.RegDeleteKey(pythonhandle, "JustTesting") +## listtree(pythonhandle) + +print "Setting PythonPath..." +corekey = "PythonCore\\%s" % sys.winver +try: + corehandle = win32api.RegOpenKey(pythonhandle, corekey) +except win32api.error, msg: + corehandle = win32api.RegCreateKey(pythonhandle, corekey) +path = [] +pwd = nt.getcwd() +for i in ["Bin", + "Lib", + "Lib\\win", + "Lib\\tkinter", + "Lib\\test", + "Lib\\dos_8x3"]: + i = pwd + "\\" + i + path.append(i) +sys.path[1:] = path +pathvalue = strop.join(path, ";") +#print "Setting PythonPath to", pathvalue +win32api.RegSetValue(corehandle, "PythonPath", win32con.REG_SZ, pathvalue) +win32api.RegCloseKey(corehandle) +#listtree(pythonhandle) +win32api.RegCloseKey(pythonhandle) + +print "Registering Python Interpreter as shell for *.py files..." +pwd = nt.getcwd() +interpreter = '"' + pwd + '\\Bin\\python.exe" -i %1' +print "Interpreter command is", interpreter +root = win32con.HKEY_CLASSES_ROOT +sz = win32con.REG_SZ +win32api.RegSetValue(root, ".py", sz, "Python.Script") +win32api.RegSetValue(root , "Python.Script", sz, "Python Script") +win32api.RegSetValue(root , "Python.Script\\Shell\\Open\\Command", sz, + interpreter) + +import compileall +print "Compiling all library modules..." +compileall.main() + +print "Installation complete." + +envkeys = map(strop.upper, nt.environ.keys()) +if 'PYTHONPATH' in envkeys: + print """ +********************************************************************** +WARNING! +You have set the environment variable PYTHONPATH. +This will override the default Python module search path +and probably cause you to use an old or broken Python installation. +Go into your control panel *now* and delete PYTHONPATH! +********************************************************************** +""" + +raw_input("Press Enter to exit: ") +sys.exit(0) + + +registry_doc = """Summary of the Win32 API Registry interfaces. + +Concepts: + A _directory_ is a collection of key/value pairs. + You need a _handle_ for a directory to do anything with it. + There are some predefined keys, e.g. HKEY_LOCAL_MACHINE. + A _key_ is an ASCII string; NT file system conventions apply. + A _value_ has a type and some data; there are predefined types + (e.g. REG_SZ is a string, REG_DWORD is a 4-byte integer). + There's some fishiness in that in fact multiple, named values + can appear under each key, but this seems little used (in this + case, the value is best seen as a structured value). + A key can also refer to a _subdirectory_. In this case the + associated value is typically empty. To get a handle for a + subdirectory, use RegOpenKey(handle, key). The key can also + be a backslash-separated path, so you can go directly from one of + the predefined keys to the directory you are interested in. + +Most common functions: + RegOpenKey(handle, keypath) -> handle + Get a handle for an existing subdirectory + RegCreateKey(handle, keypath) -> handle + Get a handle for a new subdirectory + RegCloseKey(handle) + Close a handle + RegGetValue(handle, subkey) -> string + Get the (unnamed) value stored as key in handle + RegSetValue(handle, subkey, type, value) + Set the (unnamed) value stored as key in handle, with given + type; type should be REG_SZ + RegSetValueEx(handle, name, reserved, type, value) + Set the value with given name to the given type and value; + currently reserved is ignored and type should be REG_SZ + +Functions to list directory contents (start counting at 0, fail if done): + RegEnumKey(handle, i) + Return the i'th subkey + RegEnumValue(handle, i) + Return the i'th name and value + +Lesser used functions: + RegFlushKey(handle) + Flush the changes to the handle to disk (like Unix sync()) + RegSaveKey(handle, filename, reserved) + Save the contents to a disk file (broken?!) + RegLoadKey(handle, keypath, filename) + Load the contents from a disk file (lots of restrictions!) +""" |