summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Modules/Setup.guido160
-rw-r--r--Modules/Setup.irix51
-rw-r--r--Modules/Setup.minix160
-rw-r--r--Modules/cryptmodule.c36
4 files changed, 37 insertions, 320 deletions
diff --git a/Modules/Setup.guido b/Modules/Setup.guido
deleted file mode 100644
index 63fb6c0..0000000
--- a/Modules/Setup.guido
+++ /dev/null
@@ -1,160 +0,0 @@
-# Each line in this file describes one or more optional modules.
-# Comment out lines to suppress modules.
-# Lines have the following structure:
-#
-# <module> ... [<objectfile> ...] [<cpparg> ...] [<library> ...]
-#
-# <objectfile> is anything ending in .o
-# <cpparg> is anything starting with -I, -D, -U or -C
-# <library> is anything ending in .a or beginning with -l or -L
-# <module> is anything else but should be a valid Python
-# identifier (letters, digits, underscores, beginning with non-digit)
-#
-# Lines can also have the form
-#
-# <name> = <value>
-#
-# which defines a Make variable definition inserted into Makefile.in
-#
-# NOTE: As a standard policy, as many modules as can be supported by a
-# platform should be present. The distribution comes with all modules
-# enabled that are supported by most platforms and don't require you
-# to ftp sources from elsewhere. To make this easier for SGI
-# platforms, you can copy Setup.sgi to Setup (or edit Makefile.in.in
-# to use Setup.sgi instead of Setup).
-
-
-# Some special rules to define PYTHONPATH
-# Edit the definitions below to indicate which options you are using
-
-# Don't edit this (usually)
-DESTLIB=$(prefix)/lib/python
-
-# Standard enabled (tests are always available)
-TESTPATH=:$(DESTLIB)/test
-
-# Enable this for SGI systems
-ARCHPATH=:$(DESTLIB)/sgi
-
-# Enable this for Sun systems
-#ARCHPATH=:$(DESTLIB)/sun4
-
-# Enable this if stdwin installed
-STDWINPATH=:$(DESTLIB)/stdwin
-
-PYTHONPATH=.:$(DESTLIB)$(TESTPATH)$(ARCHPATH)$(STDWINPATH)
-
-
-# Modules that should always be present (non UNIX dependent)
-
-array arraymodule.o # array objects
-math mathmodule.o # math library functions, e.g. sin()
-parser parsermodule.o # raw interface to the Python parser
-posix posixmodule.o # posix (UNIX) system calls
-regex regexmodule.o regexpr.o # Regular expressions, GNU Emacs style
-strop stropmodule.o # fast string operations implemented in C
-struct structmodule.o # binary structure packing/unpacking
-time timemodule.o # time operations and variables
-
-
-# Modules with some UNIX dependencies -- on by default.
-# Note that some UNIX versions still don't support all of these
-# so you may have to comment them out before the build completes.
-
-dbm dbmmodule.o # dbm(3) may require -ldbm or similar
-fcntl fcntlmodule.o # fcntl(2) and ioctl(2)
-nis nismodule.o # Sun yellow pages -- not everywhere
-pwd grp pwdmodule.o # pwd(3) and grp(3)
-select selectmodule.o # select(2); not on ancient System V
-socket socketmodule.o # socket(2); not on ancient System V
-
-
-# Multimedia modules -- on by default
-# These represent audio samples or images as strings
-
-audioop audioopmodule.o # Operations on audio samples
-imageop imageopmodule.o # Operations on images
-rgbimg rgbimgmodule.o # Read SGI RGB image files (but coded portably)
-
-
-# The stdwin module provides a simple, portable (between X11 and Mac)
-# windowing interface. You need to ftp the STDWIN library, e.g. from
-# ftp://ftp.cwi.nl/pub/stdwin. The STDWIN variable must point to the
-# STDWIN toplevel directory. The ARCH variable must be set to the
-# architecture identifier used to build STDWIN. NB if you combine this
-# with the gl module on an SGI machine, you should replace "-lX11" with
-# "-lX11_s".
-
-STDWIN=/ufs/guido/src/stdwin
-ARCH=sgi
-stdwin stdwinmodule.o -I$(STDWIN)/H $(STDWIN)/Build/$(ARCH)/x11/lib/lib.a -lX11_s
-
-
-# The md5 module implements the RSA Data Security, Inc. MD5
-# Message-Digest Algorithm, described in RFC 1321. The necessary files
-# md5c.c and md5.h are included here.
-
-md5 md5module.o md5c.o
-
-
-# The mpz module interfaces to the GNU Multiple Precision library.
-# You need to ftp the GNU MP library. This was last tested with a
-# somewhat modified (to get around bugs) version of GMP 1.2; it will
-# likely need some work for more recent versions. The GMP variable
-# must point to the GMP source directory.
-
-GMP=/ufs/guido/src/gmp
-mpz mpzmodule.o -I$(GMP) $(GMP)/libgmp.a
-
-
-# The rotor module (contributed by Lance Ellinghouse) implements a
-# rotor-based encryption algorithm. It is self-contained.
-
-rotor rotormodule.o
-
-
-# SGI IRIX specific modules -- off by default.
-# Switch this on if you have an SGI machine.
-# Note that some required libraries and header files aren't always
-# installed; you may be better off switching on only 'fm' and 'gl'
-# (Font Manager and Graphics Library).
-
-al almodule.o -laudio # audio
-cd cdmodule.o -lcdaudio -lds #
-cl clmodule.o -lcl
-fm fmmodule.o -lfm_s -lgl_s
-gl glmodule.o -lgl_s -lX11_s
-imgfile imgfilemodule.o -limage -lgutil -lm
-sgi sgimodule.o
-sv svmodule.o yuvconvert.o -lsvideo -lXext -lX11_s
-
-# The FORMS library, by Mark Overmars, implements user interface
-# components such as dialogs and buttons using SGI's GL and FM
-# libraries. You must ftp the FORMS library separately from
-# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
-# The FORMS variable must point to the FORMS subdirectory of the forms
-# toplevel directory.
-
-FORMS=/ufs/guido/src/forms/FORMS
-fl flmodule.o -I$(FORMS) $(FORMS)/libforms.a
-
-
-# SunOS specific modules -- off by default
-
-# sunaudiodev sunaudiodevmodule.o
-
-
-# Thread module -- works on SGI IRIX and on SunOS 5.x (SOLARIS) only.
-# Note that you must have configured (and built!) Python with the
-# --with-thread option passed to the configure script for this to work.
-
-thread threadmodule.o
-
-
-# GNN's timing module
-timing timingmodule.o
-
-
-# Example -- included for reference only
-
-# xx xxmodule.o
diff --git a/Modules/Setup.irix5 b/Modules/Setup.irix5
index 88315c4..c994044 100644
--- a/Modules/Setup.irix5
+++ b/Modules/Setup.irix5
@@ -65,6 +65,7 @@ dbm dbmmodule.o # dbm(3) may require -ldbm or similar
fcntl fcntlmodule.o # fcntl(2) and ioctl(2)
nis nismodule.o # Sun yellow pages -- not everywhere
pwd grp pwdmodule.o # pwd(3) and grp(3)
+crypt cryptmodule.o # crypt(3)
select selectmodule.o # select(2); not on ancient System V
socket socketmodule.o # socket(2); not on ancient System V
diff --git a/Modules/Setup.minix b/Modules/Setup.minix
deleted file mode 100644
index 841510e..0000000
--- a/Modules/Setup.minix
+++ /dev/null
@@ -1,160 +0,0 @@
-# Each line in this file describes one or more optional modules.
-# Comment out lines to suppress modules.
-# Lines have the following structure:
-#
-# <module> ... [<objectfile> ...] [<cpparg> ...] [<library> ...]
-#
-# <objectfile> is anything ending in .o
-# <cpparg> is anything starting with -I, -D, -U or -C
-# <library> is anything ending in .a or beginning with -l or -L
-# <module> is anything else but should be a valid Python
-# identifier (letters, digits, underscores, beginning with non-digit)
-#
-# Lines can also have the form
-#
-# <name> = <value>
-#
-# which defines a Make variable definition inserted into Makefile.in
-#
-# NOTE: As a standard policy, as many modules as can be supported by a
-# platform should be present. The distribution comes with all modules
-# enabled that are supported by most platforms and don't require you
-# to ftp sources from elsewhere. To make this easier for SGI
-# platforms, you can copy Setup.sgi to Setup (or edit Makefile.in.in
-# to use Setup.sgi instead of Setup).
-
-
-# Some special rules to define PYTHONPATH
-# Edit the definitions below to indicate which options you are using
-
-# Don't edit this (usually)
-DESTLIB=$(prefix)/lib/python
-
-# Standard enabled (tests are always available)
-TESTPATH=:$(DESTLIB)/test
-
-# Enable this for SGI systems
-#ARCHPATH=:$(DESTLIB)/sgi
-
-# Enable this for Sun systems
-#ARCHPATH=:$(DESTLIB)/sun4
-
-# Enable this if stdwin installed
-#STDWINPATH=:$(DESTLIB)/stdwin
-
-PYTHONPATH=.:$(DESTLIB)$(TESTPATH)$(ARCHPATH)$(STDWINPATH)
-
-
-# Modules that should always be present (non UNIX dependent)
-
-array arraymodule.o # array objects
-math mathmodule.o # math library functions, e.g. sin()
-parser parsermodule.o # raw interface to the Python parser
-posix posixmodule.o # posix (UNIX) system calls
-regex regexmodule.o regexpr.o # Regular expressions, GNU Emacs style
-strop stropmodule.o # fast string operations implemented in C
-struct structmodule.o # binary structure packing/unpacking
-time timemodule.o # time operations and variables
-
-
-# Modules with some UNIX dependencies -- on by default.
-# Note that some UNIX versions still don't support all of these
-# so you may have to comment them out before the build completes.
-
-#dbm dbmmodule.o # dbm(3) may require -ldbm or similar
-fcntl fcntlmodule.o # fcntl(2) and ioctl(2)
-#nis nismodule.o # Sun yellow pages -- not everywhere
-pwd grp pwdmodule.o # pwd(3) and grp(3)
-#select selectmodule.o # select(2); not on ancient System V
-#socket socketmodule.o # socket(2); not on ancient System V
-
-
-# Multimedia modules -- on by default
-# These represent audio samples or images as strings
-
-#audioop audioopmodule.o # Operations on audio samples
-#imageop imageopmodule.o # Operations on images
-#rgbimg rgbimgmodule.o # Read SGI RGB image files (but coded portably)
-
-
-# The stdwin module provides a simple, portable (between X11 and Mac)
-# windowing interface. You need to ftp the STDWIN library, e.g. from
-# ftp://ftp.cwi.nl/pub/stdwin. The STDWIN variable must point to the
-# STDWIN toplevel directory. The ARCH variable must be set to the
-# architecture identifier used to build STDWIN. NB if you combine this
-# with the gl module on an SGI machine, you should replace "-lX11" with
-# "-lX11_s".
-
-#STDWIN=/ufs/guido/src/stdwin
-#ARCH=???
-#stdwin stdwinmodule.o -I$(STDWIN)/H $(STDWIN)/Build/$(ARCH)/x11/lib/lib.a -lX11
-
-
-# The md5 module implements the RSA Data Security, Inc. MD5
-# Message-Digest Algorithm, described in RFC 1321. The necessary files
-# md5c.c and md5.h are included here.
-
-md5 md5module.o md5c.o
-
-
-# The mpz module interfaces to the GNU Multiple Precision library.
-# You need to ftp the GNU MP library. This was last tested with a
-# somewhat modified (to get around bugs) version of GMP 1.2; it will
-# likely need some work for more recent versions. The GMP variable
-# must point to the GMP source directory.
-
-#GMP=/ufs/guido/src/gmp
-#mpz mpzmodule.o -I$(GMP) $(GMP)/libgmp.a
-
-
-# The rotor module (contributed by Lance Ellinghouse) implements a
-# rotor-based encryption algorithm. It is self-contained.
-
-rotor rotormodule.o
-
-
-# SGI IRIX specific modules -- off by default.
-# Switch this on if you have an SGI machine.
-# Note that some required libraries and header files aren't always
-# installed; you may be better off switching on only 'fm' and 'gl'
-# (Font Manager and Graphics Library).
-
-#al almodule.o -laudio # audio
-#cd cdmodule.o -lcdaudio -lds #
-#cl clmodule.o -lcl
-#fm fmmodule.o -lfm_s -lgl_s
-#gl glmodule.o -lgl_s -lX11_s
-#imgfile imgfilemodule.o -limage -lgutil -lm
-#sgi sgimodule.o
-#sv svmodule.o yuvconvert.o -lsvideo -lXext -lX11_s
-
-# The FORMS library, by Mark Overmars, implements user interface
-# components such as dialogs and buttons using SGI's GL and FM
-# libraries. You must ftp the FORMS library separately from
-# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
-# The FORMS variable must point to the FORMS subdirectory of the forms
-# toplevel directory.
-
-#FORMS=/ufs/guido/src/forms/FORMS
-#fl flmodule.o -I$(FORMS) $(FORMS)/libforms.a
-
-
-# SunOS specific modules -- off by default
-
-#sunaudiodev sunaudiodevmodule.o
-
-
-# Thread module -- works on SGI IRIX and on SunOS 5.x (SOLARIS) only.
-# Note that you must have configured (and built!) Python with the
-# --with-thread option passed to the configure script for this to work.
-
-# thread threadmodule.o
-
-
-# GNN's timing module
-timing timingmodule.o
-
-
-# Example -- included for reference only
-
-# xx xxmodule.o
diff --git a/Modules/cryptmodule.c b/Modules/cryptmodule.c
new file mode 100644
index 0000000..9cdcac8
--- /dev/null
+++ b/Modules/cryptmodule.c
@@ -0,0 +1,36 @@
+/* cryptmodule.c - by Steve Majewski
+ */
+
+#include "allobjects.h"
+#include "modsupport.h"
+
+#include <sys/types.h>
+
+
+/* Module crypt */
+
+
+static object *crypt_crypt(self, args)
+ object *self, *args;
+{
+ char *word, *salt;
+ extern char * crypt();
+
+ struct passwd *p;
+ if (!getargs(args, "(ss)", &word, &salt)) {
+ return NULL;
+ }
+ return newstringobject( crypt( word, salt ) );
+
+}
+
+static struct methodlist crypt_methods[] = {
+ {"crypt", crypt_crypt},
+ {NULL, NULL} /* sentinel */
+};
+
+void
+initcrypt()
+{
+ initmodule("crypt", crypt_methods);
+}