diff options
Diffstat (limited to 'Doc/library/exceptions.rst')
| -rw-r--r-- | Doc/library/exceptions.rst | 286 |
1 files changed, 232 insertions, 54 deletions
diff --git a/Doc/library/exceptions.rst b/Doc/library/exceptions.rst index 7d622c2..9595221 100644 --- a/Doc/library/exceptions.rst +++ b/Doc/library/exceptions.rst @@ -34,6 +34,41 @@ programmers are encouraged to at least derive new exceptions from the defining exceptions is available in the Python Tutorial under :ref:`tut-userexceptions`. +When raising (or re-raising) an exception in an :keyword:`except` clause +:attr:`__context__` is automatically set to the last exception caught; if the +new exception is not handled the traceback that is eventually displayed will +include the originating exception(s) and the final exception. + +When raising a new exception (rather than using a bare ``raise`` to re-raise +the exception currently being handled), the implicit exception context can be +supplemented with an explicit cause by using :keyword:`from` with +:keyword:`raise`:: + + raise new_exc from original_exc + +The expression following :keyword:`from` must be an exception or ``None``. It +will be set as :attr:`__cause__` on the raised exception. Setting +:attr:`__cause__` also implicitly sets the :attr:`__suppress_context__` +attribute to ``True``, so that using ``raise new_exc from None`` +effectively replaces the old exception with the new one for display +purposes (e.g. converting :exc:`KeyError` to :exc:`AttributeError`, while +leaving the old exception available in :attr:`__context__` for introspection +when debugging. + +The default traceback display code shows these chained exceptions in +addition to the traceback for the exception itself. An explicitly chained +exception in :attr:`__cause__` is always shown when present. An implicitly +chained exception in :attr:`__context__` is shown only if :attr:`__cause__` +is :const:`None` and :attr:`__suppress_context__` is false. + +In either case, the exception itself is always shown after any chained +exceptions so that the final line of the traceback always shows the last +exception that was raised. + + +Base classes +------------ + The following exceptions are used mostly as base classes for other exceptions. .. exception:: BaseException @@ -90,27 +125,8 @@ The following exceptions are used mostly as base classes for other exceptions. can be raised directly by :func:`codecs.lookup`. -.. exception:: EnvironmentError - - The base class for exceptions that can occur outside the Python system: - :exc:`IOError`, :exc:`OSError`. When exceptions of this type are created with a - 2-tuple, the first item is available on the instance's :attr:`errno` attribute - (it is assumed to be an error number), and the second item is available on the - :attr:`strerror` attribute (it is usually the associated error message). The - tuple itself is also available on the :attr:`args` attribute. - - When an :exc:`EnvironmentError` exception is instantiated with a 3-tuple, the - first two items are available as above, while the third item is available on the - :attr:`filename` attribute. However, for backwards compatibility, the - :attr:`args` attribute contains only a 2-tuple of the first two constructor - arguments. - - The :attr:`filename` attribute is ``None`` when this exception is created with - other than 3 arguments. The :attr:`errno` and :attr:`strerror` attributes are - also ``None`` when the instance was created with other than 2 or 3 arguments. - In this last case, :attr:`args` contains the verbatim constructor arguments as a - tuple. - +Concrete exceptions +------------------- The following exceptions are the exceptions that are usually raised. @@ -151,21 +167,19 @@ The following exceptions are the exceptions that are usually raised. it is technically not an error. -.. exception:: IOError - - Raised when an I/O operation (such as the built-in :func:`print` or - :func:`open` functions or a method of a :term:`file object`) fails for an - I/O-related reason, e.g., "file not found" or "disk full". - - This class is derived from :exc:`EnvironmentError`. See the discussion above - for more information on exception instance attributes. - - .. exception:: ImportError Raised when an :keyword:`import` statement fails to find the module definition or when a ``from ... import`` fails to find a name that is to be imported. + The :attr:`name` and :attr:`path` attributes can be set using keyword-only + arguments to the constructor. When set they represent the name of the module + that was attempted to be imported and the path to any file which triggered + the exception, respectively. + + .. versionchanged:: 3.3 + Added the :attr:`name` and :attr:`path` attributes. + .. exception:: IndexError @@ -221,17 +235,30 @@ The following exceptions are the exceptions that are usually raised. .. index:: module: errno - This exception is derived from :exc:`EnvironmentError`. It is raised when a - function returns a system-related error (not for illegal argument types or - other incidental errors). The :attr:`errno` attribute is a numeric error - code from :c:data:`errno`, and the :attr:`strerror` attribute is the - corresponding string, as would be printed by the C function :c:func:`perror`. - See the module :mod:`errno`, which contains names for the error codes defined - by the underlying operating system. + This exception is raised when a system function returns a system-related + error, including I/O failures such as "file not found" or "disk full" + (not for illegal argument types or other incidental errors). Often a + subclass of :exc:`OSError` will actually be raised as described in + `OS exceptions`_ below. The :attr:`errno` attribute is a numeric error + code from the C variable :c:data:`errno`. + + Under Windows, the :attr:`winerror` attribute gives you the native + Windows error code. The :attr:`errno` attribute is then an approximate + translation, in POSIX terms, of that native error code. + + Under all platforms, the :attr:`strerror` attribute is the corresponding + error message as provided by the operating system (as formatted by the C + functions :c:func:`perror` under POSIX, and :c:func:`FormatMessage` + Windows). + + For exceptions that involve a file system path (such as :func:`open` or + :func:`os.unlink`), the exception instance will contain an additional + attribute, :attr:`filename`, which is the file name passed to the function. - For exceptions that involve a file system path (such as :func:`chdir` or - :func:`unlink`), the exception instance will contain a third attribute, - :attr:`filename`, which is the file name passed to the function. + .. versionchanged:: 3.3 + :exc:`EnvironmentError`, :exc:`IOError`, :exc:`WindowsError`, + :exc:`VMSError`, :exc:`socket.error`, :exc:`select.error` and + :exc:`mmap.error` have been merged into :exc:`OSError`. .. exception:: OverflowError @@ -262,8 +289,20 @@ The following exceptions are the exceptions that are usually raised. .. exception:: StopIteration Raised by built-in function :func:`next` and an :term:`iterator`\'s - :meth:`~iterator.__next__` method to signal that there are no further values. + :meth:`~iterator.__next__` method to signal that there are no further + items produced by the iterator. + The exception object has a single attribute :attr:`value`, which is + given as an argument when constructing the exception, and defaults + to :const:`None`. + + When a generator function returns, a new :exc:`StopIteration` instance is + raised, and the value returned by the function is used as the + :attr:`value` parameter to the constructor of the exception. + + .. versionchanged:: 3.3 + Added ``value`` attribute and the ability for generator functions to + use it to return a value. .. exception:: SyntaxError @@ -346,6 +385,30 @@ The following exceptions are the exceptions that are usually raised. Raised when a Unicode-related encoding or decoding error occurs. It is a subclass of :exc:`ValueError`. + :exc:`UnicodeError` has attributes that describe the encoding or decoding + error. For example, ``err.object[err.start:err.end]`` gives the particular + invalid input that the codec failed on. + + .. attribute:: encoding + + The name of the encoding that raised the error. + + .. attribute:: reason + + A string describing the specific codec error. + + .. attribute:: object + + The object the codec was attempting to encode or decode. + + .. attribute:: start + + The first index of invalid data in :attr:`object`. + + .. attribute:: end + + The index after the last invalid data in :attr:`object`. + .. exception:: UnicodeEncodeError @@ -372,27 +435,142 @@ The following exceptions are the exceptions that are usually raised. more precise exception such as :exc:`IndexError`. -.. exception:: VMSError +.. exception:: ZeroDivisionError - Only available on VMS. Raised when a VMS-specific error occurs. + Raised when the second argument of a division or modulo operation is zero. The + associated value is a string indicating the type of the operands and the + operation. +The following exceptions are kept for compatibility with previous versions; +starting from Python 3.3, they are aliases of :exc:`OSError`. + +.. exception:: EnvironmentError + +.. exception:: IOError + +.. exception:: VMSError + + Only available on VMS. + .. exception:: WindowsError - Raised when a Windows-specific error occurs or when the error number does not - correspond to an :c:data:`errno` value. The :attr:`winerror` and - :attr:`strerror` values are created from the return values of the - :c:func:`GetLastError` and :c:func:`FormatMessage` functions from the Windows - Platform API. The :attr:`errno` value maps the :attr:`winerror` value to - corresponding ``errno.h`` values. This is a subclass of :exc:`OSError`. + Only available on Windows. -.. exception:: ZeroDivisionError +OS exceptions +^^^^^^^^^^^^^ + +The following exceptions are subclasses of :exc:`OSError`, they get raised +depending on the system error code. + +.. exception:: BlockingIOError + + Raised when an operation would block on an object (e.g. socket) set + for non-blocking operation. + Corresponds to :c:data:`errno` ``EAGAIN``, ``EALREADY``, + ``EWOULDBLOCK`` and ``EINPROGRESS``. + + In addition to those of :exc:`OSError`, :exc:`BlockingIOError` can have + one more attribute: + + .. attribute:: characters_written + + An integer containing the number of characters written to the stream + before it blocked. This attribute is available when using the + buffered I/O classes from the :mod:`io` module. + +.. exception:: ChildProcessError + + Raised when an operation on a child process failed. + Corresponds to :c:data:`errno` ``ECHILD``. + +.. exception:: ConnectionError + + A base class for connection-related issues. + + Subclasses are :exc:`BrokenPipeError`, :exc:`ConnectionAbortedError`, + :exc:`ConnectionRefusedError` and :exc:`ConnectionResetError`. + +.. exception:: BrokenPipeError + + A subclass of :exc:`ConnectionError`, raised when trying to write on a + pipe while the other end has been closed, or trying to write on a socket + which has been shutdown for writing. + Corresponds to :c:data:`errno` ``EPIPE`` and ``ESHUTDOWN``. + +.. exception:: ConnectionAbortedError + + A subclass of :exc:`ConnectionError`, raised when a connection attempt + is aborted by the peer. + Corresponds to :c:data:`errno` ``ECONNABORTED``. + +.. exception:: ConnectionRefusedError + + A subclass of :exc:`ConnectionError`, raised when a connection attempt + is refused by the peer. + Corresponds to :c:data:`errno` ``ECONNREFUSED``. + +.. exception:: ConnectionResetError + + A subclass of :exc:`ConnectionError`, raised when a connection is + reset by the peer. + Corresponds to :c:data:`errno` ``ECONNRESET``. + +.. exception:: FileExistsError + + Raised when trying to create a file or directory which already exists. + Corresponds to :c:data:`errno` ``EEXIST``. + +.. exception:: FileNotFoundError + + Raised when a file or directory is requested but doesn't exist. + Corresponds to :c:data:`errno` ``ENOENT``. + +.. exception:: InterruptedError + + Raised when a system call is interrupted by an incoming signal. + Corresponds to :c:data:`errno` ``EINTR``. + +.. exception:: IsADirectoryError + + Raised when a file operation (such as :func:`os.remove`) is requested + on a directory. + Corresponds to :c:data:`errno` ``EISDIR``. + +.. exception:: NotADirectoryError + + Raised when a directory operation (such as :func:`os.listdir`) is requested + on something which is not a directory. + Corresponds to :c:data:`errno` ``ENOTDIR``. + +.. exception:: PermissionError + + Raised when trying to run an operation without the adequate access + rights - for example filesystem permissions. + Corresponds to :c:data:`errno` ``EACCES`` and ``EPERM``. + +.. exception:: ProcessLookupError + + Raised when a given process doesn't exist. + Corresponds to :c:data:`errno` ``ESRCH``. + +.. exception:: TimeoutError + + Raised when a system function timed out at the system level. + Corresponds to :c:data:`errno` ``ETIMEDOUT``. + +.. versionadded:: 3.3 + All the above :exc:`OSError` subclasses were added. + + +.. seealso:: + + :pep:`3151` - Reworking the OS and IO exception hierarchy - Raised when the second argument of a division or modulo operation is zero. The - associated value is a string indicating the type of the operands and the - operation. +Warnings +-------- The following exceptions are used as warning categories; see the :mod:`warnings` module for more information. |