1 files changed, 349 insertions, 0 deletions
diff --git a/Doc/library/lzma.rst b/Doc/library/lzma.rst
new file mode 100644
index 0000000..cae05b6
--- /dev/null
+++ b/Doc/library/lzma.rst
@@ -0,0 +1,349 @@
+:mod:`lzma` --- Compression using the LZMA algorithm
+====================================================
+
+.. module:: lzma
+   :synopsis: A Python wrapper for the liblzma compression library.
+.. moduleauthor:: Nadeem Vawda <nadeem.vawda@gmail.com>
+.. sectionauthor:: Nadeem Vawda <nadeem.vawda@gmail.com>
+
+.. versionadded:: 3.3
+
+
+This module provides classes and convenience functions for compressing and
+decompressing data using the LZMA compression algorithm. Also included is a file
+interface supporting the ``.xz`` and legacy ``.lzma`` file formats used by the
+:program:`xz` utility, as well as raw compressed streams.
+
+The interface provided by this module is very similar to that of the :mod:`bz2`
+module. However, note that :class:`LZMAFile` is *not* thread-safe, unlike
+:class:`bz2.BZ2File`, so if you need to use a single :class:`LZMAFile` instance
+from multiple threads, it is necessary to protect it with a lock.
+
+
+.. exception:: LZMAError
+
+   This exception is raised when an error occurs during compression or
+   decompression, or while initializing the compressor/decompressor state.
+
+
+Reading and writing compressed files
+------------------------------------
+
+.. class:: LZMAFile(filename=None, mode="r", \*, fileobj=None, format=None, check=-1, preset=None, filters=None)
+
+   Open an LZMA-compressed file.
+
+   An :class:`LZMAFile` can wrap an existing :term:`file object` (given by
+   *fileobj*), or operate directly on a named file (named by *filename*).
+   Exactly one of these two parameters should be provided. If *fileobj* is
+   provided, it is not closed when the :class:`LZMAFile` is closed.
+
+   The *mode* argument can be either ``"r"`` for reading (default), ``"w"`` for
+   overwriting, or ``"a"`` for appending. If *fileobj* is provided, a mode of
+   ``"w"`` does not truncate the file, and is instead equivalent to ``"a"``.
+
+   When opening a file for reading, the input file may be the concatenation of
+   multiple separate compressed streams. These are transparently decoded as a
+   single logical stream.
+
+   When opening a file for reading, the *format* and *filters* arguments have
+   the same meanings as for :class:`LZMADecompressor`. In this case, the *check*
+   and *preset* arguments should not be used.
+
+   When opening a file for writing, the *format*, *check*, *preset* and
+   *filters* arguments have the same meanings as for :class:`LZMACompressor`.
+
+   :class:`LZMAFile` supports all the members specified by
+   :class:`io.BufferedIOBase`, except for :meth:`detach` and :meth:`truncate`.
+   Iteration and the :keyword:`with` statement are supported.
+
+   The following method is also provided:
+
+   .. method:: peek(size=-1)
+
+      Return buffered data without advancing the file position. At least one
+      byte of data will be returned, unless EOF has been reached. The exact
+      number of bytes returned is unspecified (the *size* argument is ignored).
+
+
+Compressing and decompressing data in memory
+--------------------------------------------
+
+.. class:: LZMACompressor(format=FORMAT_XZ, check=-1, preset=None, filters=None)
+
+   Create a compressor object, which can be used to compress data incrementally.
+
+   For a more convenient way of compressing a single chunk of data, see
+   :func:`compress`.
+
+   The *format* argument specifies what container format should be used.
+   Possible values are:
+
+   * :const:`FORMAT_XZ`: The ``.xz`` container format.
+      This is the default format.
+
+   * :const:`FORMAT_ALONE`: The legacy ``.lzma`` container format.
+      This format is more limited than ``.xz`` -- it does not support integrity
+      checks or multiple filters.
+
+   * :const:`FORMAT_RAW`: A raw data stream, not using any container format.
+      This format specifier does not support integrity checks, and requires that
+      you always specify a custom filter chain (for both compression and
+      decompression). Additionally, data compressed in this manner cannot be
+      decompressed using :const:`FORMAT_AUTO` (see :class:`LZMADecompressor`).
+
+   The *check* argument specifies the type of integrity check to include in the
+   compressed data. This check is used when decompressing, to ensure that the
+   data has not been corrupted. Possible values are:
+
+   * :const:`CHECK_NONE`: No integrity check.
+     This is the default (and the only acceptable value) for
+     :const:`FORMAT_ALONE` and :const:`FORMAT_RAW`.
+
+   * :const:`CHECK_CRC32`: 32-bit Cyclic Redundancy Check.
+
+   * :const:`CHECK_CRC64`: 64-bit Cyclic Redundancy Check.
+     This is the default for :const:`FORMAT_XZ`.
+
+   * :const:`CHECK_SHA256`: 256-bit Secure Hash Algorithm.
+
+   If the specified check is not supported, an :class:`LZMAError` is raised.
+
+   The compression settings can be specified either as a preset compression
+   level (with the *preset* argument), or in detail as a custom filter chain
+   (with the *filters* argument).
+
+   The *preset* argument (if provided) should be an integer between ``0`` and
+   ``9`` (inclusive), optionally OR-ed with the constant
+   :const:`PRESET_EXTREME`. If neither *preset* nor *filters* are given, the
+   default behavior is to use :const:`PRESET_DEFAULT` (preset level ``6``).
+   Higher presets produce smaller output, but make the compression process
+   slower.
+
+   .. note::
+
+      In addition to being more CPU-intensive, compression with higher presets
+      also requires much more memory (and produces output that needs more memory
+      to decompress). With preset ``9`` for example, the overhead for an
+      :class:`LZMACompressor` object can be as high as 800MiB. For this reason,
+      it is generally best to stick with the default preset.
+
+   The *filters* argument (if provided) should be a filter chain specifier.
+   See :ref:`filter-chain-specs` for details.
+
+   .. method:: compress(data)
+
+      Compress *data* (a :class:`bytes` object), returning a :class:`bytes`
+      object containing compressed data for at least part of the input. Some of
+      *data* may be buffered internally, for use in later calls to
+      :meth:`compress` and :meth:`flush`. The returned data should be
+      concatenated with the output of any previous calls to :meth:`compress`.
+
+   .. method:: flush()
+
+      Finish the compression process, returning a :class:`bytes` object
+      containing any data stored in the compressor's internal buffers.
+
+      The compressor cannot be used after this method has been called.
+
+
+.. class:: LZMADecompressor(format=FORMAT_AUTO, memlimit=None, filters=None)
+
+   Create a decompressor object, which can be used to decompress data
+   incrementally.
+
+   For a more convenient way of decompressing an entire compressed stream at
+   once, see :func:`decompress`.
+
+   The *format* argument specifies the container format that should be used. The
+   default is :const:`FORMAT_AUTO`, which can decompress both ``.xz`` and
+   ``.lzma`` files. Other possible values are :const:`FORMAT_XZ`,
+   :const:`FORMAT_ALONE`, and :const:`FORMAT_RAW`.
+
+   The *memlimit* argument specifies a limit (in bytes) on the amount of memory
+   that the decompressor can use. When this argument is used, decompression will
+   fail with an :class:`LZMAError` if it is not possible to decompress the input
+   within the given memory limit.
+
+   The *filters* argument specifies the filter chain that was used to create
+   the stream being decompressed. This argument is required if *format* is
+   :const:`FORMAT_RAW`, but should not be used for other formats.
+   See :ref:`filter-chain-specs` for more information about filter chains.
+
+   .. note::
+      This class does not transparently handle inputs containing multiple
+      compressed streams, unlike :func:`decompress` and :class:`LZMAFile`. To
+      decompress a multi-stream input with :class:`LZMADecompressor`, you must
+      create a new decompressor for each stream.
+
+   .. method:: decompress(data)
+
+      Decompress *data* (a :class:`bytes` object), returning a :class:`bytes`
+      object containing the decompressed data for at least part of the input.
+      Some of *data* may be buffered internally, for use in later calls to
+      :meth:`decompress`. The returned data should be concatenated with the
+      output of any previous calls to :meth:`decompress`.
+
+   .. attribute:: check
+
+      The ID of the integrity check used by the input stream. This may be
+      :const:`CHECK_UNKNOWN` until enough of the input has been decoded to
+      determine what integrity check it uses.
+
+   .. attribute:: eof
+
+      True if the end-of-stream marker has been reached.
+
+   .. attribute:: unused_data
+
+      Data found after the end of the compressed stream.
+
+      Before the end of the stream is reached, this will be ``b""``.
+
+
+.. function:: compress(data, format=FORMAT_XZ, check=-1, preset=None, filters=None)
+
+   Compress *data* (a :class:`bytes` object), returning the compressed data as a
+   :class:`bytes` object.
+
+   See :class:`LZMACompressor` above for a description of the *format*, *check*,
+   *preset* and *filters* arguments.
+
+
+.. function:: decompress(data, format=FORMAT_AUTO, memlimit=None, filters=None)
+
+   Decompress *data* (a :class:`bytes` object), returning the uncompressed data
+   as a :class:`bytes` object.
+
+   If *data* is the concatenation of multiple distinct compressed streams,
+   decompress all of these streams, and return the concatenation of the results.
+
+   See :class:`LZMADecompressor` above for a description of the *format*,
+   *memlimit* and *filters* arguments.
+
+
+Miscellaneous
+-------------
+
+.. function:: check_is_supported(check)
+
+   Returns true if the given integrity check is supported on this system.
+
+   :const:`CHECK_NONE` and :const:`CHECK_CRC32` are always supported.
+   :const:`CHECK_CRC64` and :const:`CHECK_SHA256` may be unavailable if you are
+   using a version of :program:`liblzma` that was compiled with a limited
+   feature set.
+
+
+.. _filter-chain-specs:
+
+Specifying custom filter chains
+-------------------------------
+
+A filter chain specifier is a sequence of dictionaries, where each dictionary
+contains the ID and options for a single filter. Each dictionary must contain
+the key ``"id"``, and may contain additional keys to specify filter-dependent
+options. Valid filter IDs are as follows:
+
+* Compression filters:
+   * :const:`FILTER_LZMA1` (for use with :const:`FORMAT_ALONE`)
+   * :const:`FILTER_LZMA2` (for use with :const:`FORMAT_XZ` and :const:`FORMAT_RAW`)
+
+* Delta filter:
+   * :const:`FILTER_DELTA`
+
+* Branch-Call-Jump (BCJ) filters:
+   * :const:`FILTER_X86`
+   * :const:`FILTER_IA64`
+   * :const:`FILTER_ARM`
+   * :const:`FILTER_ARMTHUMB`
+   * :const:`FILTER_POWERPC`
+   * :const:`FILTER_SPARC`
+
+A filter chain can consist of up to 4 filters, and cannot be empty. The last
+filter in the chain must be a compression filter, and any other filters must be
+delta or BCJ filters.
+
+Compression filters support the following options (specified as additional
+entries in the dictionary representing the filter):
+
+   * ``preset``: A compression preset to use as a source of default values for
+     options that are not specified explicitly.
+   * ``dict_size``: Dictionary size in bytes. This should be between 4KiB and
+     1.5GiB (inclusive).
+   * ``lc``: Number of literal context bits.
+   * ``lp``: Number of literal position bits. The sum ``lc + lp`` must be at
+     most 4.
+   * ``pb``: Number of position bits; must be at most 4.
+   * ``mode``: :const:`MODE_FAST` or :const:`MODE_NORMAL`.
+   * ``nice_len``: What should be considered a "nice length" for a match.
+     This should be 273 or less.
+   * ``mf``: What match finder to use -- :const:`MF_HC3`, :const:`MF_HC4`,
+     :const:`MF_BT2`, :const:`MF_BT3`, or :const:`MF_BT4`.
+   * ``depth``: Maximum search depth used by match finder. 0 (default) means to
+     select automatically based on other filter options.
+
+The delta filter stores the differences between bytes, producing more repetitive
+input for the compressor in certain circumstances. It only supports a single
+The delta filter supports only one option, ``dist``. This indicates the distance
+between bytes to be subtracted. The default is 1, i.e. take the differences
+between adjacent bytes.
+
+The BCJ filters are intended to be applied to machine code. They convert
+relative branches, calls and jumps in the code to use absolute addressing, with
+the aim of increasing the redundancy that can be exploited by the compressor.
+These filters support one option, ``start_offset``. This specifies the address
+that should be mapped to the beginning of the input data. The default is 0.
+
+
+Examples
+--------
+
+Reading in a compressed file::
+
+   import lzma
+   with lzma.LZMAFile("file.xz") as f:
+      file_content = f.read()
+
+Creating a compressed file::
+
+   import lzma
+   data = b"Insert Data Here"
+   with lzma.LZMAFile("file.xz", "w") as f:
+      f.write(data)
+
+Compressing data in memory::
+
+   import lzma
+   data_in = b"Insert Data Here"
+   data_out = lzma.compress(data_in)
+
+Incremental compression::
+
+   import lzma
+   lzc = lzma.LZMACompressor()
+   out1 = lzc.compress(b"Some data\n")
+   out2 = lzc.compress(b"Another piece of data\n")
+   out3 = lzc.compress(b"Even more data\n")
+   out4 = lzc.flush()
+   # Concatenate all the partial results:
+   result = b"".join([out1, out2, out3, out4])
+
+Writing compressed data to an already-open file::
+
+   import lzma
+   with open("file.xz", "wb") as f:
+       f.write(b"This data will not be compressed\n")
+       with lzma.LZMAFile(fileobj=f, mode="w") as lzf:
+           lzf.write(b"This *will* be compressed\n")
+       f.write(b"Not compressed\n")
+
+Creating a compressed file using a custom filter chain::
+
+   import lzma
+   my_filters = [
+       {"id": lzma.FILTER_DELTA, "dist": 5},
+       {"id": lzma.FILTER_LZMA2, "preset": 7 | lzma.PRESET_EXTREME},
+   ]
+   with lzma.LZMAFile("file.xz", "w", filters=my_filters) as f:
+       f.write(b"blah blah blah")