diff options
Diffstat (limited to 'Doc/library')
| -rw-r--r-- | Doc/library/ipaddress.rst | 458 |
1 files changed, 384 insertions, 74 deletions
diff --git a/Doc/library/ipaddress.rst b/Doc/library/ipaddress.rst index e9af9c5..0fc9041 100644 --- a/Doc/library/ipaddress.rst +++ b/Doc/library/ipaddress.rst @@ -9,17 +9,26 @@ -------------- -The :mod:`ipaddress` module provides the capabilities to create, manipulate and -operate on IPv4 and IPv6 addresses and networks. +.. note:: -This is the full module API reference - for an overview and introduction, -see :ref:`ipaddress-howto`. + The ``ipaddress`` module has been included in the standard library on a + :term:`provisional basis <provisional package>`. Backwards incompatible + changes (up to and including removal of the package) may occur if deemed + necessary by the core developers. + +:mod:`ipaddress` provides the capabilities to create, manipulate and +operate on IPv4 and IPv6 addresses and networks. The functions and classes in this module make it straightforward to handle various tasks related to IP addresses, including checking whether or not two hosts are on the same subnet, iterating over all hosts in a particular -subnet, as well as checking whether or not a string represents a valid -IP address or network definition. +subnet, checking whether or not a string represents a valid IP address or +network definition, and so on. + +This is the full module API reference - for an overview and introduction, +see :ref:`ipaddress-howto`. + +.. versionadded:: 3.3 Convenience factory functions @@ -65,15 +74,24 @@ IP addresses, networks and interfaces: :exc:`ValueError` is raised if *address* does not represent a valid IPv4 or IPv6 address. +One downside of these convenience functions is that the need to handle both +IPv4 and IPv6 formats means that error messages provide minimal +information on the precise error, as the functions don't know whether the +IPv4 or IPv6 format was intended. More detailed error reporting can be +obtained by calling the appropriate version specific class constructors +directly. + + +IP Addresses +------------ Address objects ---------------- +^^^^^^^^^^^^^^^ The :class:`IPv4Address` and :class:`IPv6Address` objects share a lot of common attributes. Some attributes that are only meaningful for IPv6 addresses are also implemented by :class:`IPv4Address` objects, in order to make it easier to -write code that handles both IP versions correctly. To avoid duplication, all -common attributes will only be documented for :class:`IPv4Address`. +write code that handles both IP versions correctly. .. class:: IPv4Address(address) @@ -84,66 +102,79 @@ common attributes will only be documented for :class:`IPv4Address`. 1. A string in decimal-dot notation, consisting of four decimal integers in the inclusive range 0-255, separated by dots (e.g. ``192.168.0.1``). Each - integer represents an octet (byte) in the address, big-endian. + integer represents an octet (byte) in the address. Leading zeroes are + tolerated only for values less then 8 (as there is no ambiguity + between the decimal and octal interpretations of such strings). 2. An integer that fits into 32 bits. - 3. An integer packed into a :class:`bytes` object of length 4, big-endian. + 3. An integer packed into a :class:`bytes` object of length 4 (most + significant octet first). >>> ipaddress.IPv4Address('192.168.0.1') IPv4Address('192.168.0.1') - >>> ipaddress.IPv4Address('192.0.2.1') == ipaddress.IPv4Address(3221225985) - True + >>> ipaddress.IPv4Address(3221225985) + IPv4Address('192.168.0.1') + >>> ipaddress.IPv4Address(b'\xC0\xA8\x00\x01') + IPv4Address('192.168.0.1') - .. attribute:: exploded + .. attribute:: version - The longhand version of the address as a string. Note: the - exploded/compressed distinction is meaningful only for IPv6 addresses. - For IPv4 addresses it is the same. + The appropriate version number: ``4`` for IPv4, ``6`` for IPv6. - .. attribute:: compressed + .. attribute:: max_prefixlen - The shorthand version of the address as a string. + The total number of bits in the address representation for this + version: ``32`` for IPv4, ``128`` for IPv6. - .. attribute:: packed + The prefix defines the number of leading bits in an address that + are compared to determine whether or not an address is part of a + network. - The binary representation of this address - a :class:`bytes` object. + .. attribute:: compressed + .. attribute:: exploded - .. attribute:: version + The string representation in dotted decimal notation. Leading zeroes + are never included in the representation. - A numeric version number. + As IPv4 does not define a shorthand notation for addresses with octets + set to zero, these two attributes are always the same as ``str(addr)`` + for IPv4 addresses. Exposing these attributes makes it easier to + write display code that can handle both IPv4 and IPv6 addresses. - .. attribute:: max_prefixlen + .. attribute:: packed - Maximal length of the prefix (in bits). The prefix defines the number of - leading bits in an address that are compared to determine whether or not an - address is part of a network. + The binary representation of this address - a :class:`bytes` object of + the appropriate length (most significant octet first). This is 4 bytes + for IPv4 and 16 bytes for IPv6. .. attribute:: is_multicast - ``True`` if the address is reserved for multicast use. See :RFC:`3171` (for - IPv4) or :RFC:`2373` (for IPv6). + ``True`` if the address is reserved for multicast use. See + :RFC:`3171` (for IPv4) or :RFC:`2373` (for IPv6). .. attribute:: is_private - ``True`` if the address is allocated for private networks. See :RFC:`1918` - (for IPv4) or :RFC:`4193` (for IPv6). + ``True`` if the address is allocated for private networks. See + :RFC:`1918` (for IPv4) or :RFC:`4193` (for IPv6). .. attribute:: is_unspecified - ``True`` if the address is unspecified. See :RFC:`5375` (for IPv4) or - :RFC:`2373` (for IPv6). + ``True`` if the address is unspecified. See :RFC:`5375` (for IPv4) + or :RFC:`2373` (for IPv6). .. attribute:: is_reserved - ``True`` if the address is otherwise IETF reserved. + ``True`` if the address is otherwise IETF reserved. .. attribute:: is_loopback - ``True`` if this is a loopback address. See :RFC:`3330` (for IPv4) or - :RFC:`2373` (for IPv6). + ``True`` if this is a loopback address. See :RFC:`3330` (for IPv4) + or :RFC:`2373` (for IPv6). .. attribute:: is_link_local - ``True`` if the address is reserved for link-local. See :RFC:`3927`. + ``True`` if the address is reserved for link-local usage. See + :RFC:`3927`. + .. class:: IPv6Address(address) @@ -165,31 +196,79 @@ common attributes will only be documented for :class:`IPv4Address`. >>> ipaddress.IPv6Address('2001:db8::1000') IPv6Address('2001:db8::1000') - All the attributes exposed by :class:`IPv4Address` are supported. In - addition, the following attributs are exposed only by :class:`IPv6Address`. + All the attributes implemented by :class:`IPv4Address` are supported. In + addition, the following attributs are implemented only by + :class:`IPv6Address`. + + .. attribute:: compressed + + The short form of the address representation, with leading zeroes in + groups omitted and the longest sequence of groups consisting entirely of + zeroes collapsed to a single empty group. + + This is also the value returned by ``str(addr)`` for IPv6 addresses. + + .. attribute:: exploded + + The long form of the address representation, with all leading zeroes and + groups consisting entirely of zeroes included. + + .. attribute:: packed + .. attribute:: version + .. attribute:: max_prefixlen + .. attribute:: is_multicast + .. attribute:: is_private + .. attribute:: is_unspecified + .. attribute:: is_reserved + .. attribute:: is_loopback + .. attribute:: is_link_local + + Refer to the corresponding attribute documentation in + :class:`IPv4Address` .. attribute:: is_site_local - ``True`` if the address is reserved for site-local. Note that the site-local - address space has been deprecated by :RFC:`3879`. Use - :attr:`~IPv4Address.is_private` to test if this address is in the space of - unique local addresses as defined by :RFC:`4193`. + ``True`` if the address is reserved for site-local usage. Note that + the site-local address space has been deprecated by :RFC:`3879`. Use + :attr:`~IPv4Address.is_private` to test if this address is in the + space of unique local addresses as defined by :RFC:`4193`. .. attribute:: ipv4_mapped - If this address represents a IPv4 mapped address, return the IPv4 mapped - address. Otherwise return ``None``. + For addresses that appear to be IPv4 mapped addresses (starting with + ``::FFFF/96``), this property will report the embedded IPv4 address. + For any other address, this property will be ``None``. + + .. attribute:: sixtofour + + For addresses that appear to be 6to4 addresses (starting with + ``2002::/16``) as defined by :RFC:`3056`, this property will report + the embedded IPv4 address. For any other address, this property will + be ``None``. .. attribute:: teredo - If this address appears to be a teredo address (starts with ``2001::/32``), - return a tuple of embedded teredo IPs ``(server, client)`` pairs. Otherwise - return ``None``. + For addresses that appear to be Teredo addresses (starting with + ``2001::/32``) as defined by :RFC:`4380`, this property will report + the embedded ``(server, client)`` IP address pair. For any other + address, this property will be ``None``. - .. attribute:: sixtofour - If this address appears to contain a 6to4 embedded address, return the - embedded IPv4 address. Otherwise return ``None``. +Conversion to Strings and Integers +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +To interoperate with networking interfaces such as the socket module, +addresses must be converted to strings or integers. This is handled using +the :func:`str` and :func:`int` builtin functions:: + + >>> str(ipaddress.IPv4Address('192.168.0.1')) + '192.168.0.1' + >>> int(ipaddress.IPv4Address('192.168.0.1')) + 3232235521 + >>> str(ipaddress.IPv6Address('::1')) + '::1' + >>> int(ipaddress.IPv6Address('::1')) + 1 Operators @@ -199,6 +278,7 @@ Address objects support some operators. Unless stated otherwise, operators can only be applied between compatible objects (i.e. IPv4 with IPv4, IPv6 with IPv6). + Logical operators """"""""""""""""" @@ -212,6 +292,7 @@ examples:: >>> IPv4Address('127.0.0.2') != IPv4Address('127.0.0.1') True + Arithmetic operators """""""""""""""""""" @@ -227,45 +308,274 @@ Integers can be added to or subtracted from address objects. Some examples:: ipaddress.AddressValueError: 4294967296 (>= 2**32) is not permitted as an IPv4 address +IP Network definitions +---------------------- + +The :class:`IPv4Network` and :class:`IPv6Network` objects provide a mechanism +for defining and inspecting IP network definitions. A network definition +consists of a *mask* and a *network address*, and as such defines a range of +IP addresses that equal the network address when masked (binary AND) with the +mask. For example, a network definition with the mask ``255.255.255.0`` and +the network address ``192.168.1.0`` consists of IP addresses in the inclusive +range ``192.168.1.0`` to ``192.168.1.255``. + + +Prefix, net mask and host mask +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +There are several equivalent ways to specify IP network masks. A *prefix* +``/<nbits>`` is a notation that denotes how many high-order bits are set in +the network mask. A *net mask* is an IP address with some number of +high-order bits set. Thus the prefix ``/24`` is equivalent to the net mask +``255.255.255.0`` in IPv4, or ``ffff:ff00::`` in IPv6. In addition, a +*host mask* is the logical inverse of a *net mask*, and is sometimes used +(for example in Cisco access control lists) to denote a network mask. The +host mask equivalent to ``/24`` in IPv4 is ``0.0.0.255``. + + Network objects ---------------- +^^^^^^^^^^^^^^^ + +All attributes implemented by address objects are implemented by network +objects as well. In addition, network objects implement additional attributes. +All of these are common between :class:`IPv4Network` and :class:`IPv6Network`, +so to avoid duplication they are only documented for :class:`IPv4Network`. .. class:: IPv4Network(address, strict=True) - Construct an IPv4 network. *address* is a string or integer representing the - IP address (and optionally the network). An :exc:`AddressValueError` is - raised if *address* is not a valid IPv4 address. A :exc:`NetmaskValueError` - is raised if the netmask is not valid for an IPv4 address. + Construct an IPv4 network definition. *address* can be one of the following: + + 1. A string consisting of an IP address and an optional mask, separated by + a slash (``/``). The IP address is the network address, and the mask + can be either a single number, which means it's a *prefix*, or a string + representation of an IPv4 address. If it's the latter, the mask is + interpreted as a *net mask* if it starts with a non-zero field, or as + a *host mask* if it starts with a zero field. If no mask is provided, + it's considered to be ``/32``. + + For example, the following *address* specifications are equivalent: + ``192.168.1.0/24``, ``192.168.1.0/255.255.255.0`` and + ``192.168.1.0/0.0.0.255``. + + 2. An integer that fits into 32 bits. This is equivalent to a + single-address network, with the network address being *address* and + the mask being ``/32``. + + 3. An integer packed into a :class:`bytes` object of length 4, big-endian. + The interpretation is similar to an integer *address*. + + An :exc:`AddressValueError` is raised if *address* is not a valid IPv4 + address. A :exc:`NetmaskValueError` is raised if the mask is not valid for + an IPv4 address. If *strict* is ``True`` and host bits are set in the supplied address, - then :exc:`ValueError` is raised. Otherwise, the host bits are masked out + then :exc:`ValueError` is raised. Otherwise, the host bits are masked out to determine the appropriate network address. - >>> ipaddress.IPv4Network('192.0.2.0/27') - IPv4Network('192.0.2.0/27') - >>> ipaddress.IPv4Network('192.0.2.0/27').netmask - IPv4Address('255.255.255.224') - >>> ipaddress.IPv4Network('192.0.2.5/27', strict=False) - IPv4Network('192.0.2.0/27') + This class implements all the attributes of :class:`IPv4Address`, and also + the following attributes and methods. Unless stated otherwise, all methods + accepting other network / address objects will raise :exc:`TypeError` if + the argument's IP version is incompatible to ``self``: + + .. attribute:: broadcast_address + + The broadcast address for the network. + + .. attribute:: host mask + + The host mask, as a string. + + .. attribute:: with_prefixlen + + A string representation of the network, with the mask in prefix notation. + + .. attribute:: with_netmask + + A string representation of the network, with the mask in net mask notation. + + .. attribute:: with_hostmask + + A string representation of the network, with the mask in host mask notation. + + .. attribute:: num_addresses + + The total number of addresses in the network. + + .. attribute:: prefixlen + + Length of the prefix, in bits. + + .. method:: hosts() + + Generates an iterator over the usable hosts in the network. The usable hosts + are all the IP addresses that belong to the network, except the network + address itself and the network broadcast address. + + >>> list(ip_network('192.0.2.0/29').hosts()) + [IPv4Address('192.0.2.1'), IPv4Address('192.0.2.2'), + IPv4Address('192.0.2.3'), IPv4Address('192.0.2.4'), + IPv4Address('192.0.2.5'), IPv4Address('192.0.2.6')] + + .. method:: overlaps(other) + + ``True`` if this network is partly contained in *other*. + + .. method:: address_exclude(network) + + Computes the network defintions resulting from removing the given *network* + from this one. Returns a generator. Raises :exc:`ValueError` if *network* + is not completely contained in this network. + + >>> n1 = ip_network('192.0.2.0/28') + >>> n2 = ip_network('192.0.2.1/32') + >>> list(n1.address_exclude(n2)) + [IPv4Network('192.0.2.8/29'), IPv4Network('192.0.2.4/30'), + IPv4Network('192.0.2.2/31'), IPv4Network('192.0.2.0/32')] + + .. method:: subnets(prefixlen_diff=1, new_prefix=None) + + The subnets that join to make the current network definition, depending on + the argument values. *prefixlen_diff* is the amount our prefix length + should be increased by. *new_prefix* is the desired new prefix of the + subnets; it must be larger than our prefix. One and only one of + *prefixlen_diff* and *new_prefix* must be set. Returns an iterator of + network objects. + + >>> list(ip_network('192.0.2.0/24').subnets()) + [IPv4Network('192.0.2.0/25'), IPv4Network('192.0.2.128/25')] + >>> list(ip_network('192.0.2.0/24').subnets(prefixlen_diff=2)) + [IPv4Network('192.0.2.0/26'), IPv4Network('192.0.2.64/26'), + IPv4Network('192.0.2.128/26'), IPv4Network('192.0.2.192/26')] + >>> list(ip_network('192.0.2.0/24').subnets(new_prefix=26)) + [IPv4Network('192.0.2.0/26'), IPv4Network('192.0.2.64/26'), + IPv4Network('192.0.2.128/26'), IPv4Network('192.0.2.192/26')] + >>> list(ip_network('192.0.2.0/24').subnets(new_prefix=23)) + Traceback (most recent call last): + File "<stdin>", line 1, in <module> + raise ValueError('new prefix must be longer') + ValueError: new prefix must be longer + >>> list(ip_network('192.0.2.0/24').subnets(new_prefix=25)) + [IPv4Network('192.0.2.0/25'), IPv4Network('192.0.2.128/25')] + >>> + + .. method:: supernet(prefixlen_diff=1, new_prefix=None) + + The supernet containing this network definition, depending on the argument + values. *prefixlen_diff* is the amount our prefix length should be + decreased by. *new_prefix* is the desired new prefix of the supernet; it + must be smaller than our prefix. One and only one of *prefixlen_diff* and + *new_prefix* must be set. Returns a single network object. + + >>> ip_network('192.0.2.0/24').supernet() + IPv4Network('192.0.2.0/23') + >>> ip_network('192.0.2.0/24').supernet(prefixlen_diff=2) + IPv4Network('192.0.0.0/22') + >>> ip_network('192.0.2.0/24').supernet(new_prefix=20) + IPv4Network('192.0.0.0/20') + + .. method:: compare_networks(other) + + Compare this network to *other*. In this comparison only the network + addresses are considered; host bits aren't. Returns either ``-1``, ``0`` + or ``1``. + + >>> ip_network('192.0.2.1/32').compare_networks(ip_network('192.0.2.2/32')) + -1 + >>> ip_network('192.0.2.1/32').compare_networks(ip_network('192.0.2.0/32')) + 1 + >>> ip_network('192.0.2.1/32').compare_networks(ip_network('192.0.2.1/32')) + 0 .. class:: IPv6Network(address, strict=True) - Construct an IPv6 network. *address* is a string or integer representing the - IP address (and optionally the network). An :exc:`AddressValueError` is - raised if *address* is not a valid IPv6 address. A :exc:`NetmaskValueError` - is raised if the netmask is not valid for an IPv6 address. + Construct an IPv6 network definition. *address* can be one of the following: + + 1. A string consisting of an IP address and an optional mask, separated by + a slash (``/``). The IP addrses is the network address, and the mask + can be either a single number, which means it's a *prefix*, or a string + representation of an IPv6 address. If it's the latter, the mask is + interpreted as a *net mask*. If no mask is provided, it's considered to + be ``/128``. + + For example, the following *address* specifications are equivalent: + ``2001:db00::0/24`` and ``2001:db00::0/ffff:ff00::``. + + 2. An integer that fits into 128 bits. This is equivalent to a + single-address network, with the network address being *address* and + the mask being ``/128``. + + 3. An integer packed into a :class:`bytes` object of length 16, bit-endian. + The interpretation is similar to an integer *address*. + + An :exc:`AddressValueError` is raised if *address* is not a valid IPv6 + address. A :exc:`NetmaskValueError` is raised if the mask is not valid for + an IPv6 address. If *strict* is ``True`` and host bits are set in the supplied address, - then :exc:`ValueError` is raised. Otherwise, the host bits are masked out + then :exc:`ValueError` is raised. Otherwise, the host bits are masked out to determine the appropriate network address. - >>> ipaddress.IPv6Network('2001:db8::/96') - IPv6Network('2001:db8::/96') - >>> ipaddress.IPv6Network('2001:db8::/96').netmask - IPv6Address('ffff:ffff:ffff:ffff:ffff:ffff::') - >>> ipaddress.IPv6Network('2001:db8::1000/96', strict=False) - IPv6Network('2001:db8::/96') + .. describe:: Attributes and methods + + All attributes and methods implemented by :class:`IPv4Network` and by + :class:`IPv6Address` are also implemented by :class:`IPv6Network`. + + +Operators +^^^^^^^^^ + +Network objects support some operators. Unless stated otherwise, operators can +only be applied between compatible objects (i.e. IPv4 with IPv4, IPv6 with +IPv6). + +Logical operators +""""""""""""""""" + +Network objects can be compared with the usual set of logical operators, +similarly to address objects. + +Iteration +""""""""" + +Network objects can be iterated to list all the addresses belonging to the +network. For iteration, *all* hosts are returned, including unusable hosts +(for usable hosts, use the :meth:`~IPv4Network.hosts` method). An +example:: + + >>> for addr in IPv4Network('192.0.2.0/28'): + ... addr + ... + IPv4Address('192.0.2.0') + IPv4Address('192.0.2.1') + IPv4Address('192.0.2.2') + IPv4Address('192.0.2.3') + IPv4Address('192.0.2.4') + IPv4Address('192.0.2.5') + IPv4Address('192.0.2.6') + IPv4Address('192.0.2.7') + IPv4Address('192.0.2.8') + IPv4Address('192.0.2.9') + IPv4Address('192.0.2.10') + IPv4Address('192.0.2.11') + IPv4Address('192.0.2.12') + IPv4Address('192.0.2.13') + IPv4Address('192.0.2.14') + IPv4Address('192.0.2.15') + +Networks as containers of addresses +""""""""""""""""""""""""""""""""""" + +Network objects can act as containers of addresses. Some examples:: + + >>> IPv4Network('192.0.2.0/28')[0] + IPv4Address('192.0.2.0') + >>> IPv4Network('192.0.2.0/28')[15] + IPv4Address('192.0.2.15') + >>> IPv4Address('192.0.2.6') in IPv4Network('192.0.2.0/28') + True + >>> IPv4Address('192.0.3.6') in IPv4Network('192.0.2.0/28') + False Interface objects |