diff options
Diffstat (limited to 'Doc')
45 files changed, 752 insertions, 122 deletions
diff --git a/Doc/README.txt b/Doc/README.txt index 6df12ab..fed1f74 100644 --- a/Doc/README.txt +++ b/Doc/README.txt @@ -3,7 +3,7 @@ Python Documentation README This directory contains the reStructuredText (reST) sources to the Python documentation. You don't need to build them yourself, prebuilt versions are -available at <https://docs.python.org/3.4/download.html>. +available at <https://docs.python.org/dev/download.html>. Documentation on authoring Python documentation, including information about both style and markup, is available in the "Documenting Python" chapter of the diff --git a/Doc/c-api/memory.rst b/Doc/c-api/memory.rst index a82e1c2..ec5f691 100644 --- a/Doc/c-api/memory.rst +++ b/Doc/c-api/memory.rst @@ -92,8 +92,8 @@ functions are thread-safe, the :term:`GIL <global interpreter lock>` does not need to be held. The default raw memory block allocator uses the following functions: -:c:func:`malloc`, :c:func:`realloc` and :c:func:`free`; call ``malloc(1)`` when -requesting zero bytes. +:c:func:`malloc`, :c:func:`calloc`, :c:func:`realloc` and :c:func:`free`; call +``malloc(1)`` (or ``calloc(1, 1)``) when requesting zero bytes. .. versionadded:: 3.4 @@ -106,6 +106,17 @@ requesting zero bytes. been initialized in any way. +.. c:function:: void* PyMem_RawCalloc(size_t nelem, size_t elsize) + + Allocates *nelem* elements each whose size in bytes is *elsize* and returns + a pointer of type :c:type:`void\*` to the allocated memory, or *NULL* if the + request fails. The memory is initialized to zeros. Requesting zero elements + or elements of size zero bytes returns a distinct non-*NULL* pointer if + possible, as if ``PyMem_RawCalloc(1, 1)`` had been called instead. + + .. versionadded:: 3.5 + + .. c:function:: void* PyMem_RawRealloc(void *p, size_t n) Resizes the memory block pointed to by *p* to *n* bytes. The contents will @@ -136,8 +147,8 @@ behavior when requesting zero bytes, are available for allocating and releasing memory from the Python heap. The default memory block allocator uses the following functions: -:c:func:`malloc`, :c:func:`realloc` and :c:func:`free`; call ``malloc(1)`` when -requesting zero bytes. +:c:func:`malloc`, :c:func:`calloc`, :c:func:`realloc` and :c:func:`free`; call +``malloc(1)`` (or ``calloc(1, 1)``) when requesting zero bytes. .. warning:: @@ -152,6 +163,17 @@ requesting zero bytes. been called instead. The memory will not have been initialized in any way. +.. c:function:: void* PyMem_Calloc(size_t nelem, size_t elsize) + + Allocates *nelem* elements each whose size in bytes is *elsize* and returns + a pointer of type :c:type:`void\*` to the allocated memory, or *NULL* if the + request fails. The memory is initialized to zeros. Requesting zero elements + or elements of size zero bytes returns a distinct non-*NULL* pointer if + possible, as if ``PyMem_Calloc(1, 1)`` had been called instead. + + .. versionadded:: 3.5 + + .. c:function:: void* PyMem_Realloc(void *p, size_t n) Resizes the memory block pointed to by *p* to *n* bytes. The contents will be @@ -222,11 +244,17 @@ Customize Memory Allocators +----------------------------------------------------------+---------------------------------------+ | ``void* malloc(void *ctx, size_t size)`` | allocate a memory block | +----------------------------------------------------------+---------------------------------------+ + | ``void* calloc(void *ctx, size_t nelem, size_t elsize)`` | allocate a memory block initialized | + | | with zeros | + +----------------------------------------------------------+---------------------------------------+ | ``void* realloc(void *ctx, void *ptr, size_t new_size)`` | allocate or resize a memory block | +----------------------------------------------------------+---------------------------------------+ | ``void free(void *ctx, void *ptr)`` | free a memory block | +----------------------------------------------------------+---------------------------------------+ + .. versionchanged:: 3.5 + Add a new field ``calloc``. + .. c:type:: PyMemAllocatorDomain Enum used to identify an allocator domain. Domains: diff --git a/Doc/c-api/number.rst b/Doc/c-api/number.rst index 21951c3..9bcb649 100644 --- a/Doc/c-api/number.rst +++ b/Doc/c-api/number.rst @@ -30,6 +30,14 @@ Number Protocol the equivalent of the Python expression ``o1 * o2``. +.. c:function:: PyObject* PyNumber_MatrixMultiply(PyObject *o1, PyObject *o2) + + Returns the result of matrix multiplication on *o1* and *o2*, or *NULL* on + failure. This is the equivalent of the Python expression ``o1 @ o2``. + + .. versionadded:: 3.5 + + .. c:function:: PyObject* PyNumber_FloorDivide(PyObject *o1, PyObject *o2) Return the floor of *o1* divided by *o2*, or *NULL* on failure. This is @@ -146,6 +154,15 @@ Number Protocol the Python statement ``o1 *= o2``. +.. c:function:: PyObject* PyNumber_InPlaceMatrixMultiply(PyObject *o1, PyObject *o2) + + Returns the result of matrix multiplication on *o1* and *o2*, or *NULL* on + failure. The operation is done *in-place* when *o1* supports it. This is + the equivalent of the Python statement ``o1 @= o2``. + + .. versionadded:: 3.5 + + .. c:function:: PyObject* PyNumber_InPlaceFloorDivide(PyObject *o1, PyObject *o2) Returns the mathematical floor of dividing *o1* by *o2*, or *NULL* on failure. diff --git a/Doc/c-api/typeobj.rst b/Doc/c-api/typeobj.rst index 3a64724..f21d058 100644 --- a/Doc/c-api/typeobj.rst +++ b/Doc/c-api/typeobj.rst @@ -1139,6 +1139,9 @@ Number Object Structures binaryfunc nb_inplace_true_divide; unaryfunc nb_index; + + binaryfunc nb_matrix_multiply; + binaryfunc nb_inplace_matrix_multiply; } PyNumberMethods; .. note:: diff --git a/Doc/library/code.rst b/Doc/library/code.rst index 5b5d7cc..99bdedc 100644 --- a/Doc/library/code.rst +++ b/Doc/library/code.rst @@ -4,6 +4,7 @@ .. module:: code :synopsis: Facilities to implement read-eval-print loops. +**Source code:** :source:`Lib/code.py` The ``code`` module provides facilities to implement read-eval-print loops in Python. Two classes and convenience functions are included which can be used to @@ -165,4 +166,3 @@ interpreter objects as well as the following additions. newline. When the user enters the EOF key sequence, :exc:`EOFError` is raised. The base implementation reads from ``sys.stdin``; a subclass may replace this with a different implementation. - diff --git a/Doc/library/codecs.rst b/Doc/library/codecs.rst index 3729dac..36144e9 100644 --- a/Doc/library/codecs.rst +++ b/Doc/library/codecs.rst @@ -7,6 +7,7 @@ .. sectionauthor:: Marc-André Lemburg <mal@lemburg.com> .. sectionauthor:: Martin v. Löwis <martin@v.loewis.de> +**Source code:** :source:`Lib/codecs.py` .. index:: single: Unicode @@ -1418,4 +1419,3 @@ This module implements a variant of the UTF-8 codec: On encoding a UTF-8 encoded BOM will be prepended to the UTF-8 encoded bytes. For the stateful encoder this is only done once (on the first write to the byte stream). For decoding an optional UTF-8 encoded BOM at the start of the data will be skipped. - diff --git a/Doc/library/collections.rst b/Doc/library/collections.rst index f5fe12a..06ba042 100644 --- a/Doc/library/collections.rst +++ b/Doc/library/collections.rst @@ -978,6 +978,9 @@ The :class:`OrderedDict` constructor and :meth:`update` method both accept keyword arguments, but their order is lost because Python's function call semantics pass-in keyword arguments using a regular unordered dictionary. +.. versionchanged:: 3.5 + The items, keys, and values :term:`views <view>` of :class:`OrderedDict` now + support reverse iteration using :func:`reversed`. :class:`OrderedDict` Examples and Recipes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Doc/library/configparser.rst b/Doc/library/configparser.rst index 024d27c..bd6c364 100644 --- a/Doc/library/configparser.rst +++ b/Doc/library/configparser.rst @@ -11,6 +11,8 @@ .. sectionauthor:: Christopher G. Petrilli <petrilli@amber.org> .. sectionauthor:: Łukasz Langa <lukasz@langa.pl> +**Source code:** :source:`Lib/configparser.py` + .. index:: pair: .ini; file pair: configuration; file diff --git a/Doc/library/csv.rst b/Doc/library/csv.rst index ccc9dc6..616df55 100644 --- a/Doc/library/csv.rst +++ b/Doc/library/csv.rst @@ -5,6 +5,7 @@ :synopsis: Write and read tabular data to and from delimited files. .. sectionauthor:: Skip Montanaro <skip@pobox.com> +**Source code:** :source:`Lib/csv.py` .. index:: single: csv diff --git a/Doc/library/datetime.rst b/Doc/library/datetime.rst index e4f1eb2..553046f 100644 --- a/Doc/library/datetime.rst +++ b/Doc/library/datetime.rst @@ -7,6 +7,8 @@ .. sectionauthor:: Tim Peters <tim@zope.com> .. sectionauthor:: A.M. Kuchling <amk@amk.ca> +**Source code:** :source:`Lib/datetime.py` + .. XXX what order should the types be discussed in? The :mod:`datetime` module supplies classes for manipulating dates and times in @@ -1376,10 +1378,13 @@ Supported operations: * efficient pickling -* in Boolean contexts, a :class:`.time` object is considered to be true if and - only if, after converting it to minutes and subtracting :meth:`utcoffset` (or - ``0`` if that's ``None``), the result is non-zero. +In boolean contexts, a :class:`.time` object is always considered to be true. +.. versionchanged:: 3.5 + Before Python 3.5, a :class:`.time` object was considered to be false if it + represented midnight in UTC. This behavior was considered obscure and + error-prone and has been removed in Python 3.5. See :issue:`13936` for full + details. Instance methods: diff --git a/Doc/library/decimal.rst b/Doc/library/decimal.rst index 059ae7c..7052985 100644 --- a/Doc/library/decimal.rst +++ b/Doc/library/decimal.rst @@ -12,6 +12,8 @@ .. moduleauthor:: Stefan Krah <skrah at bytereef.org> .. sectionauthor:: Raymond D. Hettinger <python at rcn.com> +**Source code:** :source:`Lib/decimal.py` + .. import modules for testing inline doctests with the Sphinx doctest builder .. testsetup:: * @@ -742,7 +744,7 @@ Decimal objects * ``"NaN"``, indicating that the operand is a quiet NaN (Not a Number). * ``"sNaN"``, indicating that the operand is a signaling NaN. - .. method:: quantize(exp, rounding=None, context=None, watchexp=True) + .. method:: quantize(exp, rounding=None, context=None) Return a value equal to the first operand after rounding and having the exponent of the second operand. @@ -765,14 +767,8 @@ Decimal objects ``context`` argument; if neither argument is given the rounding mode of the current thread's context is used. - If *watchexp* is set (default), then an error is returned whenever the - resulting exponent is greater than :attr:`Emax` or less than - :attr:`Etiny`. - - .. deprecated:: 3.3 - *watchexp* is an implementation detail from the pure Python version - and is not present in the C version. It will be removed in version - 3.4, where it defaults to ``True``. + An error is returned whenever the resulting exponent is greater than + :attr:`Emax` or less than :attr:`Etiny`. .. method:: radix() @@ -2092,4 +2088,3 @@ Alternatively, inputs can be rounded upon creation using the >>> Context(prec=5, rounding=ROUND_DOWN).create_decimal('1.2345678') Decimal('1.2345') - diff --git a/Doc/library/difflib.rst b/Doc/library/difflib.rst index 2a75d2c..707f179 100644 --- a/Doc/library/difflib.rst +++ b/Doc/library/difflib.rst @@ -7,6 +7,8 @@ .. sectionauthor:: Tim Peters <tim_one@users.sourceforge.net> .. Markup by Fred L. Drake, Jr. <fdrake@acm.org> +**Source code:** :source:`Lib/difflib.py` + .. testsetup:: import sys @@ -25,7 +27,9 @@ diffs. For comparing directories and files, see also, the :mod:`filecmp` module. little fancier than, an algorithm published in the late 1980's by Ratcliff and Obershelp under the hyperbolic name "gestalt pattern matching." The idea is to find the longest contiguous matching subsequence that contains no "junk" - elements (the Ratcliff and Obershelp algorithm doesn't address junk). The same + elements; these "junk" elements are ones that are uninteresting in some + sense, such as blank lines or whitespace. (Handling junk is an + extension to the Ratcliff and Obershelp algorithm.) The same idea is then applied recursively to the pieces of the sequences to the left and to the right of the matching subsequence. This does not yield minimal edit sequences, but does tend to yield matches that "look right" to people. @@ -208,7 +212,7 @@ diffs. For comparing directories and files, see also, the :mod:`filecmp` module. Compare *a* and *b* (lists of strings); return a :class:`Differ`\ -style delta (a :term:`generator` generating the delta lines). - Optional keyword parameters *linejunk* and *charjunk* are for filter functions + Optional keyword parameters *linejunk* and *charjunk* are filtering functions (or ``None``): *linejunk*: A function that accepts a single string argument, and returns @@ -222,7 +226,7 @@ diffs. For comparing directories and files, see also, the :mod:`filecmp` module. *charjunk*: A function that accepts a character (a string of length 1), and returns if the character is junk, or false if not. The default is module-level function :func:`IS_CHARACTER_JUNK`, which filters out whitespace characters (a - blank or tab; note: bad idea to include newline in this!). + blank or tab; it's a bad idea to include newline in this!). :file:`Tools/scripts/ndiff.py` is a command-line front-end to this function. @@ -622,6 +626,12 @@ The :class:`Differ` class has this constructor: length 1), and returns true if the character is junk. The default is ``None``, meaning that no character is considered junk. + These junk-filtering functions speed up matching to find + differences and do not cause any differing lines or characters to + be ignored. Read the description of the + :meth:`~SequenceMatcher.find_longest_match` method's *isjunk* + parameter for an explanation. + :class:`Differ` objects are used (deltas generated) via a single method: diff --git a/Doc/library/dis.rst b/Doc/library/dis.rst index d86550f..fbabe35 100644 --- a/Doc/library/dis.rst +++ b/Doc/library/dis.rst @@ -364,6 +364,11 @@ result back on the stack. Implements ``TOS = TOS1 * TOS``. +.. opcode:: BINARY_MATRIX_MULTIPLY + + Implements ``TOS = TOS1 @ TOS``. + + .. opcode:: BINARY_FLOOR_DIVIDE Implements ``TOS = TOS1 // TOS``. @@ -436,6 +441,11 @@ the original TOS1. Implements in-place ``TOS = TOS1 * TOS``. +.. opcode:: INPLACE_MATRIX_MULTIPLY + + Implements in-place ``TOS = TOS1 @ TOS``. + + .. opcode:: INPLACE_FLOOR_DIVIDE Implements in-place ``TOS = TOS1 // TOS``. diff --git a/Doc/library/doctest.rst b/Doc/library/doctest.rst index 50626e9..fb63fde 100644 --- a/Doc/library/doctest.rst +++ b/Doc/library/doctest.rst @@ -1058,15 +1058,9 @@ from text files and modules with doctests: This function uses the same search technique as :func:`testmod`. - .. note:: - Unlike :func:`testmod` and :class:`DocTestFinder`, this function raises - a :exc:`ValueError` if *module* contains no docstrings. You can prevent - this error by passing a :class:`DocTestFinder` instance as the - *test_finder* argument with its *exclude_empty* keyword argument set - to ``False``:: - - >>> finder = doctest.DocTestFinder(exclude_empty=False) - >>> suite = doctest.DocTestSuite(test_finder=finder) + .. versionchanged:: 3.5 + :func:`DocTestSuite` returns an empty :class:`unittest.TestSuite` if *module* + contains no docstrings instead of raising :exc:`ValueError`. Under the covers, :func:`DocTestSuite` creates a :class:`unittest.TestSuite` out diff --git a/Doc/library/formatter.rst b/Doc/library/formatter.rst index 1847a80..a515f74 100644 --- a/Doc/library/formatter.rst +++ b/Doc/library/formatter.rst @@ -5,7 +5,7 @@ :synopsis: Generic output formatter and device interface. :deprecated: -.. deprecated:: 3.4 +.. deprecated-removed:: 3.4 3.6 Due to lack of usage, the formatter module has been deprecated and is slated for removal in Python 3.6. diff --git a/Doc/library/importlib.rst b/Doc/library/importlib.rst index 09a5d71..0adeefb 100644 --- a/Doc/library/importlib.rst +++ b/Doc/library/importlib.rst @@ -499,7 +499,7 @@ ABC hierarchy:: .. versionchanged:: 3.4 Raises :exc:`ImportError` instead of :exc:`NotImplementedError`. - .. method:: source_to_code(data, path='<string>') + .. staticmethod:: source_to_code(data, path='<string>') Create a code object from Python source. @@ -508,8 +508,14 @@ ABC hierarchy:: the "path" to where the source code originated from, which can be an abstract concept (e.g. location in a zip file). + With the subsequent code object one can execute it in a module by + running ``exec(code, module.__dict__)``. + .. versionadded:: 3.4 + .. versionchanged:: 3.5 + Made the method static. + .. method:: exec_module(module) Implementation of :meth:`Loader.exec_module`. @@ -1201,3 +1207,38 @@ an :term:`importer`. module will be file-based. .. versionadded:: 3.4 + +.. class:: LazyLoader(loader) + + A class which postpones the execution of the loader of a module until the + module has an attribute accessed. + + This class **only** works with loaders that define + :meth:`importlib.abc.Loader.exec_module` as control over what module type + is used for the module is required. For the same reasons, the loader + **cannot** define :meth:`importlib.abc.Loader.create_module`. Finally, + modules which substitute the object placed into :attr:`sys.modules` will + not work as there is no way to properly replace the module references + throughout the interpreter safely; :exc:`ValueError` is raised if such a + substitution is detected. + + .. note:: + For projects where startup time is critical, this class allows for + potentially minimizing the cost of loading a module if it is never used. + For projects where startup time is not essential then use of this class is + **heavily** discouraged due to error messages created during loading being + postponed and thus occurring out of context. + + .. versionadded:: 3.5 + + .. classmethod:: factory(loader) + + A static method which returns a callable that creates a lazy loader. This + is meant to be used in situations where the loader is passed by class + instead of by instance. + :: + + suffixes = importlib.machinery.SOURCE_SUFFIXES + loader = importlib.machinery.SourceFileLoader + lazy_loader = importlib.util.LazyLoader.factory(loader) + finder = importlib.machinery.FileFinder(path, [(lazy_loader, suffixes)]) diff --git a/Doc/library/inspect.rst b/Doc/library/inspect.rst index 0c08712..21408f4 100644 --- a/Doc/library/inspect.rst +++ b/Doc/library/inspect.rst @@ -462,6 +462,9 @@ function. Signature objects are *immutable*. Use :meth:`Signature.replace` to make a modified copy. + .. versionchanged:: 3.5 + Signature objects are picklable and hashable. + .. attribute:: Signature.empty A special class-level marker to specify absence of a return annotation. @@ -506,12 +509,29 @@ function. >>> str(new_sig) "(a, b) -> 'new return anno'" + .. classmethod:: Signature.from_callable(obj) + + Return a :class:`Signature` (or its subclass) object for a given callable + ``obj``. This method simplifies subclassing of :class:`Signature`: + + :: + + class MySignature(Signature): + pass + sig = MySignature.from_callable(min) + assert isinstance(sig, MySignature) + + .. versionadded:: 3.5 + .. class:: Parameter(name, kind, \*, default=Parameter.empty, annotation=Parameter.empty) Parameter objects are *immutable*. Instead of modifying a Parameter object, you can use :meth:`Parameter.replace` to create a modified copy. + .. versionchanged:: 3.5 + Parameter objects are picklable and hashable. + .. attribute:: Parameter.empty A special class-level marker to specify absence of default values and diff --git a/Doc/library/ipaddress.rst b/Doc/library/ipaddress.rst index 9625e71..6899cf6 100644 --- a/Doc/library/ipaddress.rst +++ b/Doc/library/ipaddress.rst @@ -146,6 +146,20 @@ write code that handles both IP versions correctly. the appropriate length (most significant octet first). This is 4 bytes for IPv4 and 16 bytes for IPv6. + .. attribute:: reverse_pointer + + The name of the reverse DNS PTR record for the IP address, e.g.:: + + >>> ipaddress.ip_address("127.0.0.1").reverse_pointer + '1.0.0.127.in-addr.arpa' + >>> ipaddress.ip_address("2001:db8::1").reverse_pointer + '1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.b.d.0.1.0.0.2.ip6.arpa' + + This is the name that could be used for performing a PTR lookup, not the + resolved hostname itself. + + .. versionadded:: 3.5 + .. attribute:: is_multicast ``True`` if the address is reserved for multicast use. See @@ -226,6 +240,7 @@ write code that handles both IP versions correctly. :class:`IPv4Address` class: .. attribute:: packed + .. attribute:: reverse_pointer .. attribute:: version .. attribute:: max_prefixlen .. attribute:: is_multicast @@ -377,6 +392,12 @@ so to avoid duplication they are only documented for :class:`IPv4Network`. 3. An integer packed into a :class:`bytes` object of length 4, big-endian. The interpretation is similar to an integer *address*. + 4. A two-tuple of an address description and a netmask, where the address + description is either a string, a 32-bits integer, a 4-bytes packed + integer, or an existing IPv4Address object; and the netmask is either + an integer representing the prefix length (e.g. ``24``) or a string + representing the prefix mask (e.g. ``255.255.255.0``). + An :exc:`AddressValueError` is raised if *address* is not a valid IPv4 address. A :exc:`NetmaskValueError` is raised if the mask is not valid for an IPv4 address. @@ -389,6 +410,10 @@ so to avoid duplication they are only documented for :class:`IPv4Network`. objects will raise :exc:`TypeError` if the argument's IP version is incompatible to ``self`` + .. versionchanged:: 3.5 + + Added the two-tuple form for the *address* constructor parameter. + .. attribute:: version .. attribute:: max_prefixlen @@ -553,6 +578,11 @@ so to avoid duplication they are only documented for :class:`IPv4Network`. 3. An integer packed into a :class:`bytes` object of length 16, bit-endian. The interpretation is similar to an integer *address*. + 4. A two-tuple of an address description and a netmask, where the address + description is either a string, a 128-bits integer, a 16-bytes packed + integer, or an existing IPv4Address object; and the netmask is an + integer representing the prefix length. + An :exc:`AddressValueError` is raised if *address* is not a valid IPv6 address. A :exc:`NetmaskValueError` is raised if the mask is not valid for an IPv6 address. @@ -561,6 +591,10 @@ so to avoid duplication they are only documented for :class:`IPv4Network`. then :exc:`ValueError` is raised. Otherwise, the host bits are masked out to determine the appropriate network address. + .. versionchanged:: 3.5 + + Added the two-tuple form for the *address* constructor parameter. + .. attribute:: version .. attribute:: max_prefixlen .. attribute:: is_multicast diff --git a/Doc/library/itertools.rst b/Doc/library/itertools.rst index f489535..1f0bced 100644 --- a/Doc/library/itertools.rst +++ b/Doc/library/itertools.rst @@ -87,10 +87,15 @@ loops that truncate the stream. .. function:: accumulate(iterable[, func]) - Make an iterator that returns accumulated sums. Elements may be any addable - type including :class:`~decimal.Decimal` or :class:`~fractions.Fraction`. - If the optional *func* argument is supplied, it should be a function of two - arguments and it will be used instead of addition. + Make an iterator that returns accumulated sums, or accumulated + results of other binary functions (specified via the optional + *func* argument). If *func* is supplied, it should be a function + of two arguments. Elements of the input *iterable* may be any type + that can be accepted as arguments to *func*. (For example, with + the default operation of addition, elements may be any addable + type including :class:`~decimal.Decimal` or + :class:`~fractions.Fraction`.) If the input iterable is empty, the + output iterable will also be empty. Equivalent to:: diff --git a/Doc/library/json.rst b/Doc/library/json.rst index 5d97ee8..d6bdd8a 100644 --- a/Doc/library/json.rst +++ b/Doc/library/json.rst @@ -104,6 +104,8 @@ Using json.tool from the shell to validate and pretty-print:: $ echo '{1.2:3.4}' | python -mjson.tool Expecting property name enclosed in double quotes: line 1 column 2 (char 1) +See :ref:`json-commandline` for detailed documentation. + .. highlight:: python3 .. note:: @@ -563,3 +565,54 @@ the last name-value pair for a given name:: {'x': 3} The *object_pairs_hook* parameter can be used to alter this behavior. + +.. highlight:: bash + +.. _json-commandline: + +Command Line Interface +---------------------- + +The :mod:`json.tool` module provides a simple command line interface to validate +and pretty-print JSON objects. + +If the optional :option:`infile` and :option:`outfile` arguments are not +specified, :attr:`sys.stdin` and :attr:`sys.stdout` will be used respectively:: + + $ echo '{"json": "obj"}' | python -m json.tool + { + "json": "obj" + } + $ echo '{1.2:3.4}' | python -m json.tool + Expecting property name enclosed in double quotes: line 1 column 2 (char 1) + + +Command line options +^^^^^^^^^^^^^^^^^^^^ + +.. cmdoption:: infile + + The JSON file to be validated or pretty-printed:: + + $ python -m json.tool mp_films.json + [ + { + "title": "And Now for Something Completely Different", + "year": 1971 + }, + { + "title": "Monty Python and the Holy Grail", + "year": 1975 + } + ] + + If *infile* is not specified, read from :attr:`sys.stdin`. + +.. cmdoption:: outfile + + Write the output of the *infile* to the given *outfile*. Otherwise, write it + to :attr:`sys.stdout`. + +.. cmdoption:: -h, --help + + Show the help message. diff --git a/Doc/library/operator.rst b/Doc/library/operator.rst index 3bcbaa4..3654d13 100644 --- a/Doc/library/operator.rst +++ b/Doc/library/operator.rst @@ -138,6 +138,14 @@ The mathematical and bitwise operations are the most numerous: Return ``a * b``, for *a* and *b* numbers. +.. function:: matmul(a, b) + __matmul__(a, b) + + Return ``a @ b``. + + .. versionadded:: 3.5 + + .. function:: neg(obj) __neg__(obj) @@ -400,6 +408,8 @@ Python syntax and the functions in the :mod:`operator` module. +-----------------------+-------------------------+---------------------------------------+ | Multiplication | ``a * b`` | ``mul(a, b)`` | +-----------------------+-------------------------+---------------------------------------+ +| Matrix Multiplication | ``a @ b`` | ``matmul(a, b)`` | ++-----------------------+-------------------------+---------------------------------------+ | Negation (Arithmetic) | ``- a`` | ``neg(a)`` | +-----------------------+-------------------------+---------------------------------------+ | Negation (Logical) | ``not a`` | ``not_(a)`` | @@ -508,6 +518,14 @@ will perform the update, so no subsequent assignment is necessary: ``a = imul(a, b)`` is equivalent to ``a *= b``. +.. function:: imatmul(a, b) + __imatmul__(a, b) + + ``a = imatmul(a, b)`` is equivalent to ``a @= b``. + + .. versionadded:: 3.5 + + .. function:: ior(a, b) __ior__(a, b) diff --git a/Doc/library/os.rst b/Doc/library/os.rst index 3d492ba..54b2542 100644 --- a/Doc/library/os.rst +++ b/Doc/library/os.rst @@ -1087,6 +1087,9 @@ or `the MSDN <http://msdn.microsoft.com/en-us/library/z0kc8e3z.aspx>`_ on Window All platforms support sockets as *out* file descriptor, and some platforms allow other types (e.g. regular file, pipe) as well. + Cross-platform applications should not use *headers*, *trailers* and *flags* + arguments. + Availability: Unix. .. versionadded:: 3.3 @@ -2730,10 +2733,27 @@ written in Python, such as a mail server's external command delivery program. Availability: Unix. -.. function:: popen(...) +.. function:: popen(command, mode='r', buffering=-1) + + Open a pipe to or from *command*. The return value is an open file object + connected to the pipe, which can be read or written depending on whether *mode* + is ``'r'`` (default) or ``'w'``. The *buffering* argument has the same meaning as + the corresponding argument to the built-in :func:`open` function. The + returned file object reads or writes text strings rather than bytes. + + The ``close`` method returns :const:`None` if the subprocess exited + successfully, or the subprocess's return code if there was an + error. On POSIX systems, if the return code is positive it + represents the return value of the process left-shifted by one + byte. If the return code is negative, the process was terminated + by the signal given by the negated value of the return code. (For + example, the return value might be ``- signal.SIGKILL`` if the + subprocess was killed.) On Windows systems, the return value + contains the signed integer return code from the child process. - Run child processes, returning opened pipes for communications. These functions - are described in section :ref:`os-newstreams`. + This is implemented using :class:`subprocess.Popen`; see that class's + documentation for more powerful ways to manage and communicate with + subprocesses. .. function:: spawnl(mode, path, ...) diff --git a/Doc/library/pkgutil.rst b/Doc/library/pkgutil.rst index 13ea7b9..5d3295d 100644 --- a/Doc/library/pkgutil.rst +++ b/Doc/library/pkgutil.rst @@ -58,7 +58,7 @@ support. .. deprecated:: 3.3 This emulation is no longer needed, as the standard import mechanism - is now fully PEP 302 compliant and available in :mod:`importlib` + is now fully PEP 302 compliant and available in :mod:`importlib`. .. class:: ImpLoader(fullname, file, filename, etc) @@ -67,7 +67,7 @@ support. .. deprecated:: 3.3 This emulation is no longer needed, as the standard import mechanism - is now fully PEP 302 compliant and available in :mod:`importlib` + is now fully PEP 302 compliant and available in :mod:`importlib`. .. function:: find_loader(fullname) diff --git a/Doc/library/random.rst b/Doc/library/random.rst index 11dd367..f8b7727 100644 --- a/Doc/library/random.rst +++ b/Doc/library/random.rst @@ -46,8 +46,7 @@ from sources provided by the operating system. .. warning:: The pseudo-random generators of this module should not be used for - security purposes. Use :func:`os.urandom` or :class:`SystemRandom` if - you require a cryptographically secure pseudo-random number generator. + security purposes. Bookkeeping functions: diff --git a/Doc/library/selectors.rst b/Doc/library/selectors.rst index 98377c8..8bd9e1c 100644 --- a/Doc/library/selectors.rst +++ b/Doc/library/selectors.rst @@ -45,6 +45,7 @@ Classes hierarchy:: +-- SelectSelector +-- PollSelector +-- EpollSelector + +-- DevpollSelector +-- KqueueSelector @@ -207,6 +208,16 @@ below: This returns the file descriptor used by the underlying :func:`select.epoll` object. +.. class:: DevpollSelector() + + :func:`select.devpoll`-based selector. + + .. method:: fileno() + + This returns the file descriptor used by the underlying + :func:`select.devpoll` object. + + .. versionadded:: 3.5 .. class:: KqueueSelector() diff --git a/Doc/library/shutil.rst b/Doc/library/shutil.rst index e4f348c..3ed1d05 100644 --- a/Doc/library/shutil.rst +++ b/Doc/library/shutil.rst @@ -421,6 +421,26 @@ Another example that uses the *ignore* argument to add a logging call:: copytree(source, destination, ignore=_logpath) +.. _shutil-rmtree-example: + +rmtree example +~~~~~~~~~~~~~~ + +This example shows how to remove a directory tree on Windows where some +of the files have their read-only bit set. It uses the onerror callback +to clear the readonly bit and reattempt the remove. Any subsequent failure +will propagate. :: + + import os, stat + import shutil + + def remove_readonly(func, path, _): + "Clear the readonly bit and reattempt the removal" + os.chmod(path, stat.S_IWRITE) + func(path) + + shutil.rmtree(directory, onerror=remove_readonly) + .. _archiving-operations: Archiving operations diff --git a/Doc/library/signal.rst b/Doc/library/signal.rst index 84e2836..a97ce66 100644 --- a/Doc/library/signal.rst +++ b/Doc/library/signal.rst @@ -65,6 +65,16 @@ Besides, only the main thread is allowed to set a new signal handler. Module contents --------------- +.. versionchanged:: 3.5 + signal (SIG*), handler (:const:`SIG_DFL`, :const:`SIG_IGN`) and sigmask + (:const:`SIG_BLOCK`, :const:`SIG_UNBLOCK`, :const:`SIG_SETMASK`) + related constants listed below were turned into + :class:`enums <enum.IntEnum>`. + :func:`getsignal`, :func:`pthread_sigmask`, :func:`sigpending` and + :func:`sigwait` functions return human-readable + :class:`enums <enum.IntEnum>`. + + The variables defined in the :mod:`signal` module are: diff --git a/Doc/library/site.rst b/Doc/library/site.rst index e57b8cc..6beda84 100644 --- a/Doc/library/site.rst +++ b/Doc/library/site.rst @@ -38,7 +38,7 @@ Unix and Macintosh). For each of the distinct head-tail combinations, it sees if it refers to an existing directory, and if so, adds it to ``sys.path`` and also inspects the newly added path for configuration files. -.. deprecated:: 3.4 +.. deprecated-removed:: 3.4 3.5 Support for the "site-python" directory will be removed in 3.5. If a file named "pyvenv.cfg" exists one directory above sys.executable, diff --git a/Doc/library/socketserver.rst b/Doc/library/socketserver.rst index 1ec4438..9db36d5 100644 --- a/Doc/library/socketserver.rst +++ b/Doc/library/socketserver.rst @@ -113,7 +113,7 @@ the request handler class :meth:`handle` method. Another approach to handling multiple simultaneous requests in an environment that supports neither threads nor :func:`~os.fork` (or where these are too expensive or inappropriate for the service) is to maintain an explicit table of -partially finished requests and to use :func:`~select.select` to decide which +partially finished requests and to use :mod:`selectors` to decide which request to work on next (or whether to handle a new incoming request). This is particularly important for stream services where each client can potentially be connected for a long time (if threads or subprocesses cannot be used). See @@ -136,7 +136,7 @@ Server Objects .. method:: BaseServer.fileno() Return an integer file descriptor for the socket on which the server is - listening. This function is most commonly passed to :func:`select.select`, to + listening. This function is most commonly passed to :mod:`selectors`, to allow monitoring multiple servers in the same process. diff --git a/Doc/library/ssl.rst b/Doc/library/ssl.rst index 94a0c81..8c1484b 100644 --- a/Doc/library/ssl.rst +++ b/Doc/library/ssl.rst @@ -372,22 +372,34 @@ Certificate handling IDN A-labels such as ``www*.xn--pthon-kva.org`` are still supported, but ``x*.python.org`` no longer matches ``xn--tda.python.org``. -.. function:: cert_time_to_seconds(timestring) +.. function:: cert_time_to_seconds(cert_time) - Returns a floating-point value containing a normal seconds-after-the-epoch - time value, given the time-string representing the "notBefore" or "notAfter" - date from a certificate. + Return the time in seconds since the Epoch, given the ``cert_time`` + string representing the "notBefore" or "notAfter" date from a + certificate in ``"%b %d %H:%M:%S %Y %Z"`` strptime format (C + locale). - Here's an example:: + Here's an example: - >>> import ssl - >>> ssl.cert_time_to_seconds("May 9 00:00:00 2007 GMT") - 1178694000.0 - >>> import time - >>> time.ctime(ssl.cert_time_to_seconds("May 9 00:00:00 2007 GMT")) - 'Wed May 9 00:00:00 2007' + .. doctest:: newcontext -.. function:: get_server_certificate(addr, ssl_version=PROTOCOL_SSLv3, ca_certs=None) + >>> import ssl + >>> timestamp = ssl.cert_time_to_seconds("Jan 5 09:34:43 2018 GMT") + >>> timestamp + 1515144883 + >>> from datetime import datetime + >>> print(datetime.utcfromtimestamp(timestamp)) + 2018-01-05 09:34:43 + + "notBefore" or "notAfter" dates must use GMT (:rfc:`5280`). + + .. versionchanged:: 3.5 + Interpret the input time as a time in UTC as specified by 'GMT' + timezone in the input string. Local timezone was used + previously. Return an integer (no fractions of a second in the + input format) + +.. function:: get_server_certificate(addr, ssl_version=PROTOCOL_SSLv23, ca_certs=None) Given the address ``addr`` of an SSL-protected server, as a (*hostname*, *port-number*) pair, fetches the server's certificate, and returns it as a @@ -401,6 +413,10 @@ Certificate handling .. versionchanged:: 3.3 This function is now IPv6-compatible. + .. versionchanged:: 3.5 + The default *ssl_version* is changed from :data:`PROTOCOL_SSLv3` to + :data:`PROTOCOL_SSLv23` for maximum compatibility with modern servers. + .. function:: DER_cert_to_PEM_cert(DER_cert_bytes) Given a certificate as a DER-encoded blob of bytes, returns a PEM-encoded @@ -1588,8 +1604,25 @@ the sockets in non-blocking mode and use an event loop). Notes on non-blocking sockets ----------------------------- -When working with non-blocking sockets, there are several things you need -to be aware of: +SSL sockets behave slightly different than regular sockets in +non-blocking mode. When working with non-blocking sockets, there are +thus several things you need to be aware of: + +- Most :class:`SSLSocket` methods will raise either + :exc:`SSLWantWriteError` or :exc:`SSLWantReadError` instead of + :exc:`BlockingIOError` if an I/O operation would + block. :exc:`SSLWantReadError` will be raised if a read operation on + the underlying socket is necessary, and :exc:`SSLWantWriteError` for + a write operation on the underlying socket. Note that attempts to + *write* to an SSL socket may require *reading* from the underlying + socket first, and attempts to *read* from the SSL socket may require + a prior *write* to the underlying socket. + + .. versionchanged:: 3.5 + + In earlier Python versions, the :meth:`!SSLSocket.send` method + returned zero instead of raising :exc:`SSLWantWriteError` or + :exc:`SSLWantReadError`. - Calling :func:`~select.select` tells you that the OS-level socket can be read from (or written to), but it does not imply that there is sufficient diff --git a/Doc/library/subprocess.rst b/Doc/library/subprocess.rst index ce3097b..e542780 100644 --- a/Doc/library/subprocess.rst +++ b/Doc/library/subprocess.rst @@ -629,6 +629,7 @@ Instances of the :class:`Popen` class have the following methods: must be bytes or, if *universal_newlines* was ``True``, a string. :meth:`communicate` returns a tuple ``(stdoutdata, stderrdata)``. + The data will be bytes or, if *universal_newlines* was ``True``, strings. Note that if you want to send data to the process's stdin, you need to create the Popen object with ``stdin=PIPE``. Similarly, to get anything other than diff --git a/Doc/library/token.rst b/Doc/library/token.rst index 4cd7098..88fb38b 100644 --- a/Doc/library/token.rst +++ b/Doc/library/token.rst @@ -93,6 +93,7 @@ The token constants are: DOUBLESLASH DOUBLESLASHEQUAL AT + ATEQUAL RARROW ELLIPSIS OP diff --git a/Doc/library/turtle.rst b/Doc/library/turtle.rst index b015530..0e3a979 100644 --- a/Doc/library/turtle.rst +++ b/Doc/library/turtle.rst @@ -1879,7 +1879,7 @@ Settings and special methods >>> cv = screen.getcanvas() >>> cv - <turtle.ScrolledCanvas object at ...> + <turtle.ScrolledCanvas object ...> .. function:: getshapes() diff --git a/Doc/library/unittest.mock.rst b/Doc/library/unittest.mock.rst index cb72a68..4f58892 100644 --- a/Doc/library/unittest.mock.rst +++ b/Doc/library/unittest.mock.rst @@ -198,7 +198,7 @@ a `MagicMock` for you. You can specify an alternative class of `Mock` using the `new_callable` argument to `patch`. -.. class:: Mock(spec=None, side_effect=None, return_value=DEFAULT, wraps=None, name=None, spec_set=None, **kwargs) +.. class:: Mock(spec=None, side_effect=None, return_value=DEFAULT, wraps=None, name=None, spec_set=None, unsafe=False, **kwargs) Create a new `Mock` object. `Mock` takes several optional arguments that specify the behaviour of the Mock object: @@ -235,6 +235,12 @@ the `new_callable` argument to `patch`. this is a new Mock (created on first access). See the :attr:`return_value` attribute. + * `unsafe`: By default if any attribute starts with *assert* or + *assret* will raise an `AttributeError`. Passing `unsafe=True` will allow + access to these attributes. + + .. versionadded:: 3.5 + * `wraps`: Item for the mock object to wrap. If `wraps` is not None then calling the Mock will pass the call through to the wrapped object (returning the real result). Attribute access on the mock will return a @@ -315,6 +321,20 @@ the `new_callable` argument to `patch`. >>> calls = [call(4), call(2), call(3)] >>> mock.assert_has_calls(calls, any_order=True) + .. method:: assert_not_called(*args, **kwargs) + + Assert the mock was never called. + + >>> m = Mock() + >>> m.hello.assert_not_called() + >>> obj = m.hello() + >>> m.hello.assert_not_called() + Traceback (most recent call last): + ... + AssertionError: Expected 'hello' to not have been called. Called 1 times. + + .. versionadded:: 3.5 + .. method:: reset_mock() @@ -1031,6 +1051,12 @@ patch default because it can be dangerous. With it switched on you can write passing tests against APIs that don't actually exist! + .. note:: + + .. versionchanged:: 3.5 + If you are patching builtins in a module then you don't + need to pass `create=True`, it will be added by default. + Patch can be used as a `TestCase` class decorator. It works by decorating each test method in the class. This reduces the boilerplate code when your test methods share a common patchings set. `patch` finds @@ -1401,6 +1427,21 @@ It is also possible to stop all patches which have been started by using Stop all active patches. Only stops patches started with `start`. +.. patch-builtins: + +patch builtins +~~~~~~~~~~~~~~~ +You can patch any builtins within a module. The following example patches +builtin `ord`: + + >>> @patch('__main__.ord') + ... def test(mock_ord): + ... mock_ord.return_value = 101 + ... print(ord('c')) + ... + >>> test() + 101 + TEST_PREFIX ~~~~~~~~~~~ @@ -2011,7 +2052,7 @@ Mocking context managers with a :class:`MagicMock` is common enough and fiddly enough that a helper function is useful. >>> m = mock_open() - >>> with patch('__main__.open', m, create=True): + >>> with patch('__main__.open', m): ... with open('foo', 'w') as h: ... h.write('some stuff') ... @@ -2026,7 +2067,7 @@ enough that a helper function is useful. And for reading files: - >>> with patch('__main__.open', mock_open(read_data='bibble'), create=True) as m: + >>> with patch('__main__.open', mock_open(read_data='bibble')) as m: ... with open('foo') as h: ... result = h.read() ... diff --git a/Doc/library/xmlrpc.client.rst b/Doc/library/xmlrpc.client.rst index 3cb19d1..6f14227 100644 --- a/Doc/library/xmlrpc.client.rst +++ b/Doc/library/xmlrpc.client.rst @@ -191,6 +191,11 @@ grouped under the reserved :attr:`system` attribute: no such string is available, an empty string is returned. The documentation string may contain HTML markup. +.. versionchanged:: 3.5 + + Instances of :class:`ServerProxy` support the :term:`context manager` protocol + for closing the underlying transport. + A working example follows. The server code:: @@ -208,9 +213,9 @@ The client code for the preceding server:: import xmlrpc.client - proxy = xmlrpc.client.ServerProxy("http://localhost:8000/") - print("3 is even: %s" % str(proxy.is_even(3))) - print("100 is even: %s" % str(proxy.is_even(100))) + with xmlrpc.client.ServerProxy("http://localhost:8000/") as proxy: + print("3 is even: %s" % str(proxy.is_even(3))) + print("100 is even: %s" % str(proxy.is_even(100))) .. _datetime-objects: @@ -518,14 +523,14 @@ Example of Client Usage from xmlrpc.client import ServerProxy, Error # server = ServerProxy("http://localhost:8000") # local server - server = ServerProxy("http://betty.userland.com") + with ServerProxy("http://betty.userland.com") as proxy: - print(server) + print(proxy) - try: - print(server.examples.getStateName(41)) - except Error as v: - print("ERROR", v) + try: + print(proxy.examples.getStateName(41)) + except Error as v: + print("ERROR", v) To access an XML-RPC server through a proxy, you need to define a custom transport. The following example shows how: diff --git a/Doc/reference/datamodel.rst b/Doc/reference/datamodel.rst index 78dfd79..e46688e 100644 --- a/Doc/reference/datamodel.rst +++ b/Doc/reference/datamodel.rst @@ -1968,6 +1968,7 @@ left undefined. .. method:: object.__add__(self, other) object.__sub__(self, other) object.__mul__(self, other) + object.__matmul__(self, other) object.__truediv__(self, other) object.__floordiv__(self, other) object.__mod__(self, other) @@ -1984,15 +1985,16 @@ left undefined. builtin: pow builtin: pow - These methods are called to implement the binary arithmetic operations (``+``, - ``-``, ``*``, ``/``, ``//``, ``%``, :func:`divmod`, :func:`pow`, ``**``, ``<<``, - ``>>``, ``&``, ``^``, ``|``). For instance, to evaluate the expression - ``x + y``, where *x* is an instance of a class that has an :meth:`__add__` - method, ``x.__add__(y)`` is called. The :meth:`__divmod__` method should be the - equivalent to using :meth:`__floordiv__` and :meth:`__mod__`; it should not be - related to :meth:`__truediv__`. Note that :meth:`__pow__` should be defined - to accept an optional third argument if the ternary version of the built-in - :func:`pow` function is to be supported. + These methods are called to implement the binary arithmetic operations + (``+``, ``-``, ``*``, ``@``, ``/``, ``//``, ``%``, :func:`divmod`, + :func:`pow`, ``**``, ``<<``, ``>>``, ``&``, ``^``, ``|``). For instance, to + evaluate the expression ``x + y``, where *x* is an instance of a class that + has an :meth:`__add__` method, ``x.__add__(y)`` is called. The + :meth:`__divmod__` method should be the equivalent to using + :meth:`__floordiv__` and :meth:`__mod__`; it should not be related to + :meth:`__truediv__`. Note that :meth:`__pow__` should be defined to accept + an optional third argument if the ternary version of the built-in :func:`pow` + function is to be supported. If one of those methods does not support the operation with the supplied arguments, it should return ``NotImplemented``. @@ -2001,6 +2003,7 @@ left undefined. .. method:: object.__radd__(self, other) object.__rsub__(self, other) object.__rmul__(self, other) + object.__rmatmul__(self, other) object.__rtruediv__(self, other) object.__rfloordiv__(self, other) object.__rmod__(self, other) @@ -2016,14 +2019,14 @@ left undefined. builtin: divmod builtin: pow - These methods are called to implement the binary arithmetic operations (``+``, - ``-``, ``*``, ``/``, ``//``, ``%``, :func:`divmod`, :func:`pow`, ``**``, - ``<<``, ``>>``, ``&``, ``^``, ``|``) with reflected (swapped) operands. - These functions are only called if the left operand does not support the - corresponding operation and the operands are of different types. [#]_ For - instance, to evaluate the expression ``x - y``, where *y* is an instance of - a class that has an :meth:`__rsub__` method, ``y.__rsub__(x)`` is called if - ``x.__sub__(y)`` returns *NotImplemented*. + These methods are called to implement the binary arithmetic operations + (``+``, ``-``, ``*``, ``@``, ``/``, ``//``, ``%``, :func:`divmod`, + :func:`pow`, ``**``, ``<<``, ``>>``, ``&``, ``^``, ``|``) with reflected + (swapped) operands. These functions are only called if the left operand does + not support the corresponding operation and the operands are of different + types. [#]_ For instance, to evaluate the expression ``x - y``, where *y* is + an instance of a class that has an :meth:`__rsub__` method, ``y.__rsub__(x)`` + is called if ``x.__sub__(y)`` returns *NotImplemented*. .. index:: builtin: pow @@ -2041,6 +2044,7 @@ left undefined. .. method:: object.__iadd__(self, other) object.__isub__(self, other) object.__imul__(self, other) + object.__imatmul__(self, other) object.__itruediv__(self, other) object.__ifloordiv__(self, other) object.__imod__(self, other) @@ -2052,17 +2056,17 @@ left undefined. object.__ior__(self, other) These methods are called to implement the augmented arithmetic assignments - (``+=``, ``-=``, ``*=``, ``/=``, ``//=``, ``%=``, ``**=``, ``<<=``, ``>>=``, - ``&=``, ``^=``, ``|=``). These methods should attempt to do the operation - in-place (modifying *self*) and return the result (which could be, but does - not have to be, *self*). If a specific method is not defined, the augmented - assignment falls back to the normal methods. For instance, if *x* is an - instance of a class with an :meth:`__iadd__` method, ``x += y`` is equivalent - to ``x = x.__iadd__(y)`` . Otherwise, ``x.__add__(y)`` and ``y.__radd__(x)`` - are considered, as with the evaluation of ``x + y``. In certain situations, - augmented assignment can result in unexpected errors (see - :ref:`faq-augmented-assignment-tuple-error`), but this behavior is in - fact part of the data model. + (``+=``, ``-=``, ``*=``, ``@=``, ``/=``, ``//=``, ``%=``, ``**=``, ``<<=``, + ``>>=``, ``&=``, ``^=``, ``|=``). These methods should attempt to do the + operation in-place (modifying *self*) and return the result (which could be, + but does not have to be, *self*). If a specific method is not defined, the + augmented assignment falls back to the normal methods. For instance, if *x* + is an instance of a class with an :meth:`__iadd__` method, ``x += y`` is + equivalent to ``x = x.__iadd__(y)`` . Otherwise, ``x.__add__(y)`` and + ``y.__radd__(x)`` are considered, as with the evaluation of ``x + y``. In + certain situations, augmented assignment can result in unexpected errors (see + :ref:`faq-augmented-assignment-tuple-error`), but this behavior is in fact + part of the data model. .. method:: object.__neg__(self) diff --git a/Doc/reference/expressions.rst b/Doc/reference/expressions.rst index 06baba0..5b92a48 100644 --- a/Doc/reference/expressions.rst +++ b/Doc/reference/expressions.rst @@ -892,8 +892,9 @@ from the power operator, there are only two levels, one for multiplicative operators and one for additive operators: .. productionlist:: - m_expr: `u_expr` | `m_expr` "*" `u_expr` | `m_expr` "//" `u_expr` | `m_expr` "/" `u_expr` - : | `m_expr` "%" `u_expr` + m_expr: `u_expr` | `m_expr` "*" `u_expr` | `m_expr` "@" `m_expr` | + : `m_expr` "//" `u_expr`| `m_expr` "/" `u_expr` | + : `m_expr` "%" `u_expr` a_expr: `m_expr` | `a_expr` "+" `m_expr` | `a_expr` "-" `m_expr` .. index:: single: multiplication @@ -904,6 +905,13 @@ the other must be a sequence. In the former case, the numbers are converted to a common type and then multiplied together. In the latter case, sequence repetition is performed; a negative repetition factor yields an empty sequence. +.. index:: single: matrix multiplication + +The ``@`` (at) operator is intended to be used for matrix multiplication. No +builtin Python types implement this operator. + +.. versionadded:: 3.5 + .. index:: exception: ZeroDivisionError single: division @@ -1346,8 +1354,9 @@ groups from right to left). +-----------------------------------------------+-------------------------------------+ | ``+``, ``-`` | Addition and subtraction | +-----------------------------------------------+-------------------------------------+ -| ``*``, ``/``, ``//``, ``%`` | Multiplication, division, remainder | -| | [#]_ | +| ``*``, ``@``, ``/``, ``//``, ``%`` | Multiplication, matrix | +| | multiplication division, | +| | remainder [#]_ | +-----------------------------------------------+-------------------------------------+ | ``+x``, ``-x``, ``~x`` | Positive, negative, bitwise NOT | +-----------------------------------------------+-------------------------------------+ diff --git a/Doc/reference/simple_stmts.rst b/Doc/reference/simple_stmts.rst index 66c234c..a42d1f6 100644 --- a/Doc/reference/simple_stmts.rst +++ b/Doc/reference/simple_stmts.rst @@ -280,7 +280,7 @@ operation and an assignment statement: .. productionlist:: augmented_assignment_stmt: `augtarget` `augop` (`expression_list` | `yield_expression`) augtarget: `identifier` | `attributeref` | `subscription` | `slicing` - augop: "+=" | "-=" | "*=" | "/=" | "//=" | "%=" | "**=" + augop: "+=" | "-=" | "*=" | "@=" | "/=" | "//=" | "%=" | "**=" : | ">>=" | "<<=" | "&=" | "^=" | "|=" (See section :ref:`primaries` for the syntax definitions for the last three diff --git a/Doc/tools/sphinxext/pyspecific.py b/Doc/tools/sphinxext/pyspecific.py index 31d8c06..e37ef89 100644 --- a/Doc/tools/sphinxext/pyspecific.py +++ b/Doc/tools/sphinxext/pyspecific.py @@ -10,7 +10,7 @@ """ ISSUE_URI = 'http://bugs.python.org/issue%s' -SOURCE_URI = 'http://hg.python.org/cpython/file/3.4/%s' +SOURCE_URI = 'http://hg.python.org/cpython/file/default/%s' from docutils import nodes, utils diff --git a/Doc/tools/sphinxext/susp-ignored.csv b/Doc/tools/sphinxext/susp-ignored.csv index 1769023..7acc79b 100644 --- a/Doc/tools/sphinxext/susp-ignored.csv +++ b/Doc/tools/sphinxext/susp-ignored.csv @@ -276,9 +276,5 @@ whatsnew/3.2,,:feed,>>> urllib.parse.urlparse('http://[dead:beef:cafe:5417:affe: whatsnew/3.2,,:gz,">>> with tarfile.open(name='myarchive.tar.gz', mode='w:gz') as tf:" whatsnew/3.2,,:location,zope9-location = ${zope9:location} whatsnew/3.2,,:prefix,zope-conf = ${custom:prefix}/etc/zope.conf -whatsnew/changelog,,:platform,:platform: whatsnew/changelog,,:gz,": TarFile opened with external fileobj and ""w:gz"" mode didn't" -whatsnew/changelog,,:PythonCmd,"With Tk < 8.5 _tkinter.c:PythonCmd() raised UnicodeDecodeError, caused" -whatsnew/changelog,,::,": Fix FTP tests for IPv6, bind to ""::1"" instead of ""localhost""." whatsnew/changelog,,::,": Use ""127.0.0.1"" or ""::1"" instead of ""localhost"" as much as" -whatsnew/changelog,,:password,user:password diff --git a/Doc/tutorial/interpreter.rst b/Doc/tutorial/interpreter.rst index 44dc6d1..5c23ad7 100644 --- a/Doc/tutorial/interpreter.rst +++ b/Doc/tutorial/interpreter.rst @@ -10,13 +10,13 @@ Using the Python Interpreter Invoking the Interpreter ======================== -The Python interpreter is usually installed as :file:`/usr/local/bin/python3.4` +The Python interpreter is usually installed as :file:`/usr/local/bin/python3.5` on those machines where it is available; putting :file:`/usr/local/bin` in your Unix shell's search path makes it possible to start it by typing the command: .. code-block:: text - python3.4 + python3.5 to the shell. [#]_ Since the choice of the directory where the interpreter lives is an installation option, other places are possible; check with your local @@ -24,11 +24,11 @@ Python guru or system administrator. (E.g., :file:`/usr/local/python` is a popular alternative location.) On Windows machines, the Python installation is usually placed in -:file:`C:\\Python34`, though you can change this when you're running the +:file:`C:\\Python35`, though you can change this when you're running the installer. To add this directory to your path, you can type the following command into the command prompt in a DOS box:: - set path=%path%;C:\python34 + set path=%path%;C:\python35 Typing an end-of-file character (:kbd:`Control-D` on Unix, :kbd:`Control-Z` on Windows) at the primary prompt causes the interpreter to exit with a zero exit @@ -94,8 +94,8 @@ with the *secondary prompt*, by default three dots (``...``). The interpreter prints a welcome message stating its version number and a copyright notice before printing the first prompt:: - $ python3.4 - Python 3.4 (default, Mar 16 2014, 09:25:04) + $ python3.5 + Python 3.5 (default, Sep 16 2015, 09:25:04) [GCC 4.8.2] on linux Type "help", "copyright", "credits" or "license" for more information. >>> @@ -148,7 +148,7 @@ Executable Python Scripts On BSD'ish Unix systems, Python scripts can be made directly executable, like shell scripts, by putting the line :: - #! /usr/bin/env python3.4 + #! /usr/bin/env python3.5 (assuming that the interpreter is on the user's :envvar:`PATH`) at the beginning of the script and giving the file an executable mode. The ``#!`` must be the diff --git a/Doc/tutorial/stdlib.rst b/Doc/tutorial/stdlib.rst index 2e3ed18..8db2c01 100644 --- a/Doc/tutorial/stdlib.rst +++ b/Doc/tutorial/stdlib.rst @@ -15,7 +15,7 @@ operating system:: >>> import os >>> os.getcwd() # Return the current working directory - 'C:\\Python34' + 'C:\\Python35' >>> os.chdir('/server/accesslogs') # Change current working directory >>> os.system('mkdir today') # Run the command mkdir in the system shell 0 diff --git a/Doc/tutorial/stdlib2.rst b/Doc/tutorial/stdlib2.rst index c0197ea..497c584 100644 --- a/Doc/tutorial/stdlib2.rst +++ b/Doc/tutorial/stdlib2.rst @@ -277,7 +277,7 @@ applications include caching objects that are expensive to create:: Traceback (most recent call last): File "<stdin>", line 1, in <module> d['primary'] # entry was automatically removed - File "C:/python34/lib/weakref.py", line 46, in __getitem__ + File "C:/python35/lib/weakref.py", line 46, in __getitem__ o = self.data[key]() KeyError: 'primary' diff --git a/Doc/whatsnew/3.5.rst b/Doc/whatsnew/3.5.rst new file mode 100644 index 0000000..4410de6 --- /dev/null +++ b/Doc/whatsnew/3.5.rst @@ -0,0 +1,240 @@ +**************************** + What's New In Python 3.5 +**************************** + +:Release: |release| +:Date: |today| + +.. Rules for maintenance: + + * Anyone can add text to this document. Do not spend very much time + on the wording of your changes, because your text will probably + get rewritten to some degree. + + * The maintainer will go through Misc/NEWS periodically and add + changes; it's therefore more important to add your changes to + Misc/NEWS than to this file. + + * This is not a complete list of every single change; completeness + is the purpose of Misc/NEWS. Some changes I consider too small + or esoteric to include. If such a change is added to the text, + I'll just remove it. (This is another reason you shouldn't spend + too much time on writing your addition.) + + * If you want to draw your new text to the attention of the + maintainer, add 'XXX' to the beginning of the paragraph or + section. + + * It's OK to just add a fragmentary note about a change. For + example: "XXX Describe the transmogrify() function added to the + socket module." The maintainer will research the change and + write the necessary text. + + * You can comment out your additions if you like, but it's not + necessary (especially when a final release is some months away). + + * Credit the author of a patch or bugfix. Just the name is + sufficient; the e-mail address isn't necessary. + + * It's helpful to add the bug/patch number as a comment: + + XXX Describe the transmogrify() function added to the socket + module. + (Contributed by P.Y. Developer in :issue:`12345`.) + + This saves the maintainer the effort of going through the Mercurial log + when researching a change. + +This article explains the new features in Python 3.5, compared to 3.4. + +For full details, see the :source:`Misc/NEWS` file. + +.. note:: Prerelease users should be aware that this document is currently in + draft form. It will be updated substantially as Python 3.5 moves towards + release, so it's worth checking back even after reading earlier versions. + + +.. seealso:: + + .. :pep:`4XX` - Python 3.5 Release Schedule + + +Summary -- Release highlights +============================= + +.. This section singles out the most important changes in Python 3.3. + Brevity is key. + +New syntax features: + +* None yet. + +New library modules: + +* None yet. + +New built-in features: + +* None yet. + +Implementation improvements: + +* When the ``LC_TYPE`` locale is the POSIX locale (``C`` locale), + :py:data:`sys.stdin` and :py:data:`sys.stdout` are now using the + ``surrogateescape`` error handler, instead of the ``strict`` error handler + (:issue:`19977`). + +Significantly Improved Library Modules: + +* None yet. + +Security improvements: + +* None yet. + +Please read on for a comprehensive list of user-facing changes. + + +.. PEP-sized items next. + +.. _pep-4XX: + +.. PEP 4XX: Virtual Environments +.. ============================= + + +.. (Implemented by Foo Bar.) + +.. .. seealso:: + + :pep:`4XX` - Python Virtual Environments + PEP written by Carl Meyer + + + + +Other Language Changes +====================== + +Some smaller changes made to the core Python language are: + +* None yet. + + + +New Modules +=========== + +.. module name +.. ----------- + +* None yet. + + +Improved Modules +================ + +* Different constants of :mod:`signal` module are now enumeration values using + the :mod:`enum` module. This allows meaningful names to be printed during + debugging, instead of integer “magic numbers”. (contribute by Giampaolo + Rodola' in :issue:`21076`) + +* :class:`xmlrpc.client.ServerProxy` is now a :term:`context manager` + (contributed by Claudiu Popa in :issue:`20627`). + +* :class:`inspect.Signature` and :class:`inspect.Parameter` are now + picklable and hashable (contributed by Yury Selivanov in :issue:`20726` + and :issue:`20334`). + +* New class method :meth:`inspect.Signature.from_callable`, which makes + subclassing of :class:`~inspect.Signature` easier (contributed + by Yury Selivanov and Eric Snow in :issue:`17373`). + +* :class:`importlib.util.LazyLoader` allows for the lazy loading of modules in + applications where startup time is paramount (contributed by Brett Cannon in + :issue:`17621`). + +* :func:`doctest.DocTestSuite` returns an empty :class:`unittest.TestSuite` if + *module* contains no docstrings instead of raising :exc:`ValueError` + (contributed by Glenn Jones in :issue:`15916`). + +* :func:`importlib.abc.InspectLoader.source_to_code` is now a + static method to make it easier to work with source code in a string. + With a module object that you want to initialize you can then use + ``exec(code, module.__dict__)`` to execute the code in the module. + + +Optimizations +============= + +Major performance enhancements have been added: + +* Construction of ``bytes(int)`` and ``bytearray(int)`` (filled by zero bytes) + is faster and use less memory (until the bytearray buffer is filled with + data) for large objects. ``calloc()`` is used instead of ``malloc()`` to + allocate memory for these objects. + + +Build and C API Changes +======================= + +Changes to Python's build process and to the C API include: + +* New ``calloc`` functions: + + * :c:func:`PyMem_RawCalloc` + * :c:func:`PyMem_Calloc` + * :c:func:`PyObject_Calloc` + * :c:func:`_PyObject_GC_Calloc` + + +Deprecated +========== + +Unsupported Operating Systems +----------------------------- + +* None yet. + + +Deprecated Python modules, functions and methods +------------------------------------------------ + +* The :mod:`formatter` module has now graduated to full deprecation and is still + slated for removal in Python 3.6. + + +Deprecated functions and types of the C API +------------------------------------------- + +* None yet. + + +Deprecated features +------------------- + +* None yet. + + +Porting to Python 3.5 +===================== + +This section lists previously described changes and other bugfixes +that may require changes to your code. + +Changes in the Python API +------------------------- + +* Before Python 3.5, a :class:`datetime.time` object was considered to be false + if it represented midnight in UTC. This behavior was considered obscure and + error-prone and has been removed in Python 3.5. See :issue:`13936` for full + details. + +* :meth:`ssl.SSLSocket.send()` now raises either :exc:`ssl.SSLWantReadError` + or :exc:`ssl.SSLWantWriteError` on a non-blocking socket if the operation + would block. Previously, it would return 0. See :issue:`20951`. + +Changes in the C API +-------------------- + +* The :c:type:`PyMemAllocator` structure has a new ``calloc`` field. diff --git a/Doc/whatsnew/index.rst b/Doc/whatsnew/index.rst index 29902e4..edb5502 100644 --- a/Doc/whatsnew/index.rst +++ b/Doc/whatsnew/index.rst @@ -11,6 +11,7 @@ anyone wishing to stay up-to-date after a new release. .. toctree:: :maxdepth: 2 + 3.5.rst 3.4.rst 3.3.rst 3.2.rst |