diff options
Diffstat (limited to 'Makefile.in')
| -rw-r--r-- | Makefile.in | 595 |
1 files changed, 0 insertions, 595 deletions
diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index 7a48f73..0000000 --- a/Makefile.in +++ /dev/null @@ -1,595 +0,0 @@ -# Top-level Makefile for Python -# -# As distributed, this file is called Makefile.in; it is processed -# into the real Makefile by running the script ./configure, which -# replaces things like @spam@ with values appropriate for your system. -# This means that if you edit Makefile, your changes get lost the next -# time you run the configure script. Ideally, you can do: -# -# ./configure -# make -# make test -# make install -# -# The top-level Makefile invokes make recursively in a number of -# subdirectories (see the SUBDIRS variable below). If you want to, -# you can invoke make in individual subdirectories. However, the -# sub-Makefiles are also generated by configure, and the quickest way -# to make sure they are up to date is by running make (or "make -# Makefiles") at the top level. This is particularly important for -# Modules/Makefile, which has to be regenerated every time you edit -# Modules/Setup. The python executable is built in the Modules -# directory and then moved to the top-level directory. The recursive -# makes pass three options to subordinate makes: OPT (a quick way to -# change some compiler options; it usually defaults to -O), prefix and -# exec_prefix (the installation paths). -# -# If you have a previous version of Python installed that you don't -# want to overwrite, you can use "make altinstall" instead of "make -# install". This changes the install procedure so it installs the -# Python binary as "python<version>". The libraries and include files -# are always installed in a subdirectory called "python<version>". -# "make altinstall" does not install the manual page. If you want to -# make this installation the "official" installation but want to keep -# the old binary around "just in case", rename the installed python -# binary to "python<oldversion>" before running "make install". -# (This only works between different versions, e.g. 1.3 and 1.4 -- -# different betas of the same version will overwrite each other in -# installation unless you override the VERSION Make variable.) -# -# In fact, "make install" or "make bininstall" installs the binary -# as python<version> and makes a hard link to python, so when -# installing a new version in the future, nothing of the current -# version will be lost (except for the man page). -# -# If recursive makes fail, try invoking make as "make MAKE=make". -# -# See also the section "Build instructions" in the README file. - -# Substitutions by configure -VERSION= @VERSION@ -srcdir= @srcdir@ -VPATH= @srcdir@ -CC= @CC@ -AR= @AR@ -RANLIB= @RANLIB@ -DEFS= @DEFS@ - -# Machine-dependent subdirectories -MACHDEP= @MACHDEP@ - -# Install prefix for architecture-independent files -prefix= @prefix@ - -# Install prefix for architecture-dependent files -exec_prefix= @exec_prefix@ - -# Expanded directories -BINDIR= $(exec_prefix)/bin -LIBDIR= $(exec_prefix)/lib -MANDIR= $(prefix)/man -INCLUDEDIR= $(prefix)/include -CONFINCLUDEDIR= $(exec_prefix)/include -SCRIPTDIR= $(prefix)/lib - -# Detailed destination directories -BINLIBDEST= $(LIBDIR)/python$(VERSION) -LIBDEST= $(SCRIPTDIR)/python$(VERSION) -INCLUDEPY= $(INCLUDEDIR)/python$(VERSION) -CONFINCLUDEPY= $(CONFINCLUDEDIR)/python$(VERSION) -LIBP= $(LIBDIR)/python$(VERSION) - -# Symbols used for using shared libraries -SO= @SO@ -LDSHARED= @LDSHARED@ -CCSHARED= @CCSHARED@ -LINKFORSHARED= @LINKFORSHARED@ -DESTSHARED= $(BINLIBDEST)/lib-dynload - -# Shell used by make (some versions default to the login shell, which is bad) -SHELL= /bin/sh - -# Executable suffix (.exe on Windows and Mac OS X) -EXE= @EXE@ - -# Modes for directories, executables and data files created by the -# install process. Default to user-only-writable for all file types. -DIRMODE= 755 -EXEMODE= 755 -FILEMODE= 644 - -# Portable install script (configure doesn't always guess right) -INSTALL= @srcdir@/install-sh -c -INSTALL_PROGRAM=${INSTALL} -m $(EXEMODE) -INSTALL_DATA= ${INSTALL} -m $(FILEMODE) - -# Use this to make a link between python$(VERSION) and python in $(BINDIR) -LN=@LN@ - -# --with-PACKAGE options for configure script -# e.g. --with-readline --with-svr5 --with-solaris --with-thread -# (see README for an explanation) -WITH= - -# Compiler options passed to subordinate makes -OPT= @OPT@ - -# Subdirectories where to run make recursively -SUBDIRS= Parser Grammar Objects Python Modules - -# Other subdirectories -SUBDIRSTOO= Include Lib Misc Demo - -# Files and directories to be distributed -CONFIGFILES= configure configure.in acconfig.h config.h.in Makefile.in -DISTFILES= README ChangeLog $(CONFIGFILES) -DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy -DIST= $(DISTFILES) $(DISTDIRS) - -# Compilation flags for getbuildinfo.c only -CFLAGS= $(OPT) -I. $(DEFS) - -LIBRARY= libpython$(VERSION).a -LDLIBRARY= @LDLIBRARY@ -DLLLIBRARY= @DLLLIBRARY@ - -# Default target -all: $(LIBRARY) python$(EXE) sharedmods - -# Build the interpreter -python$(EXE): $(LIBRARY) buildno Modules/python.o - expr `cat buildno` + 1 >buildno1 - mv -f buildno1 buildno - $(CC) -c $(CFLAGS) -DBUILD=`cat buildno` \ - $(srcdir)/Modules/getbuildinfo.c - $(AR) cr $(LIBRARY) getbuildinfo.o - $(RANLIB) $(LIBRARY) - @MAKE_LDLIBRARY@ - cd Modules; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \ - prefix="$(prefix)" exec_prefix="$(exec_prefix)" \ - LIBRARY=../$(LDLIBRARY) link - -Modules/python.o: $(srcdir)/Modules/python.c - cd Modules; $(MAKE) OPT="$(OPT)" python.o - -buildno: - echo 0 >buildno - -platform: python$(EXE) - ./python$(EXE) -c 'import sys ; from distutils.util import get_platform ; print get_platform()+"-"+sys.version[0:3]' >platform - -# Build the shared modules -sharedmods: python$(EXE) - ./python$(EXE) $(srcdir)/setup.py build -# Old rules for building shared modules using makesetup -oldsharedmods: - cd Modules; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \ - prefix="$(prefix)" exec_prefix="$(exec_prefix)" \ - sharedmods - -# Build the library -$(LIBRARY): $(SUBDIRS) - if test ! -f $(LIBRARY); \ - then for i in $(SUBDIRS); do rm -f $$i/add2lib; done; true; \ - else true; fi - for i in $(SUBDIRS); do \ - (cd $$i; $(MAKE) VERSION="$(VERSION)" add2lib); done - -# This rule is only here for DG/UX and BeOS!!! -libpython$(VERSION).so: $(LIBRARY) - case `uname -s | tr -d '/ ' | tr '[A-Z]' '[a-z]'` in \ - *dgux*) \ - test -d dgux || mkdir dgux; \ - (cd dgux;ar x ../$^;ld -G -o ../$@ * ); \ - /bin/rm -rf ./dgux \ - ;; \ - beos) \ - $(srcdir)/BeOS/ar-fake so $(LIBRARY) $@ \ - ;; \ - esac - -# This rule is here for OPENSTEP/Rhapsody/MacOSX -libpython$(VERSION).dylib: $(LIBRARY) - libtool -o $(LDLIBRARY) -dynamic $(OTHER_LIBTOOL_OPT) $(LIBRARY) -framework System @LIBTOOL_CRUFT@ - -$(SUBDIRS): Makefiles - -Grammar: - cd Grammar ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \ - prefix="$(prefix)" exec_prefix="$(exec_prefix)" all - -Parser: - cd Parser ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \ - prefix="$(prefix)" exec_prefix="$(exec_prefix)" all - -Python: - cd Python ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \ - prefix="$(prefix)" exec_prefix="$(exec_prefix)" all - -Objects: - cd Objects ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \ - prefix="$(prefix)" exec_prefix="$(exec_prefix)" all - -Modules: Parser Python Objects - cd Modules ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \ - prefix="$(prefix)" exec_prefix="$(exec_prefix)" all - -# Test the interpreter (twice, once without .pyc files, once with) -TESTOPTS= -l -TESTPROG= $(srcdir)/Lib/test/regrtest.py -TESTPYTHON= ./python$(EXE) -tt -test: all platform - -rm -f $(srcdir)/Lib/test/*.py[co] - -PYTHONPATH=./build/lib.`cat platform` $(TESTPYTHON) $(TESTPROG) $(TESTOPTS) - PYTHONPATH=./build/lib.`cat platform` $(TESTPYTHON) $(TESTPROG) $(TESTOPTS) - -# Install everything -install: altinstall bininstall maninstall - -# Install almost everything without disturbing previous versions -altinstall: altbininstall libinstall inclinstall libainstall sharedinstall - -# Install the interpreter (by creating a hard link to python$(VERSION)) -bininstall: altbininstall - -if test -f $(BINDIR)/python$(EXE); \ - then rm -f $(BINDIR)/python$(EXE); \ - else true; \ - fi - (cd $(BINDIR); $(LN) python$(VERSION)$(EXE) python$(EXE)) - -# Install the interpreter with $(VERSION) affixed -# This goes into $(exec_prefix) -altbininstall: python$(EXE) - @for i in $(BINDIR); \ - do \ - if test ! -d $$i; then \ - echo "Creating directory $$i"; \ - mkdir $$i; \ - chmod $(DIRMODE) $$i; \ - else true; \ - fi; \ - done - $(INSTALL_PROGRAM) python$(EXE) $(BINDIR)/python$(VERSION)$(EXE) - if test -f libpython$(VERSION).so; then \ - $(INSTALL_DATA) libpython$(VERSION).so $(LIBDIR); \ - else true; \ - fi - if test -f "$(DLLLIBRARY)"; then \ - $(INSTALL_DATA) $(DLLLIBRARY) $(BINDIR); \ - else true; \ - fi - -# Install the manual page -maninstall: - @for i in $(MANDIR) $(MANDIR)/man1; \ - do \ - if test ! -d $$i; then \ - echo "Creating directory $$i"; \ - mkdir $$i; \ - chmod $(DIRMODE) $$i; \ - else true; \ - fi; \ - done - $(INSTALL_DATA) $(srcdir)/Misc/python.man \ - $(MANDIR)/man1/python.1 - -# Install the library -PLATDIR= plat-$(MACHDEP) -MACHDEPS= $(PLATDIR) -XMLLIBSUBDIRS= xml xml/dom xml/parsers xml/sax -LIBSUBDIRS= lib-old lib-tk site-packages test test/output encodings \ - distutils distutils/command $(XMLLIBSUBDIRS) curses $(MACHDEPS) -libinstall: python $(srcdir)/Lib/$(PLATDIR) - @for i in $(SCRIPTDIR) $(LIBDEST); \ - do \ - if test ! -d $$i; then \ - echo "Creating directory $$i"; \ - mkdir $$i; \ - chmod $(DIRMODE) $$i; \ - else true; \ - fi; \ - done - @for d in $(LIBSUBDIRS); \ - do \ - a=$(srcdir)/Lib/$$d; \ - if test ! -d $$a; then continue; else true; fi; \ - b=$(LIBDEST)/$$d; \ - if test ! -d $$b; then \ - echo "Creating directory $$b"; \ - mkdir $$b; \ - chmod $(DIRMODE) $$b; \ - else true; \ - fi; \ - done - @for i in $(srcdir)/Lib/*.py $(srcdir)/Lib/*.doc; \ - do \ - if test -x $$i; then \ - $(INSTALL_PROGRAM) $$i $(LIBDEST); \ - echo $(INSTALL_PROGRAM) $$i $(LIBDEST); \ - else \ - $(INSTALL_DATA) $$i $(LIBDEST); \ - echo $(INSTALL_DATA) $$i $(LIBDEST); \ - fi; \ - done - @for d in $(LIBSUBDIRS); \ - do \ - a=$(srcdir)/Lib/$$d; \ - if test ! -d $$a; then continue; else true; fi; \ - b=$(LIBDEST)/$$d; \ - for i in $$a/*; \ - do \ - case $$i in \ - *CVS) ;; \ - *.py[co]) ;; \ - *.orig) ;; \ - *~) ;; \ - *) \ - if test -d $$i; then continue; fi; \ - if test -x $$i; then \ - echo $(INSTALL_PROGRAM) $$i $$b; \ - $(INSTALL_PROGRAM) $$i $$b; \ - else \ - echo $(INSTALL_DATA) $$i $$b; \ - $(INSTALL_DATA) $$i $$b; \ - fi;; \ - esac; \ - done; \ - done - $(INSTALL_DATA) $(srcdir)/LICENSE $(LIBDEST)/LICENSE.txt - PYTHONPATH=$(LIBDEST) \ - ./python$(EXE) -tt $(LIBDEST)/compileall.py $(LIBDEST) - PYTHONPATH=$(LIBDEST) \ - ./python$(EXE) -O $(LIBDEST)/compileall.py $(LIBDEST) - -# Create the PLATDIR source directory, if one wasn't distributed.. -$(srcdir)/Lib/$(PLATDIR): - mkdir $(srcdir)/Lib/$(PLATDIR) - cp $(srcdir)/Lib/plat-generic/regen $(srcdir)/Lib/$(PLATDIR)/regen - export PATH; PATH="`pwd`:$$PATH"; \ - export PYTHONPATH; PYTHONPATH="`pwd`/Lib"; \ - export EXE; EXE="$(EXE)"; \ - cd $(srcdir)/Lib/$(PLATDIR); ./regen - -# Install the include files -INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY) -inclinstall: - @for i in $(INCLDIRSTOMAKE); \ - do \ - if test ! -d $$i; then \ - echo "Creating directory $$i"; \ - mkdir $$i; \ - chmod $(DIRMODE) $$i; \ - else true; \ - fi; \ - done - @for i in $(srcdir)/Include/*.h; \ - do \ - echo $(INSTALL_DATA) $$i $(INCLUDEPY); \ - $(INSTALL_DATA) $$i $(INCLUDEPY); \ - done - $(INSTALL_DATA) config.h $(CONFINCLUDEPY)/config.h - -# Install the library and miscellaneous stuff needed for extending/embedding -# This goes into $(exec_prefix) -LIBPL= $(LIBP)/config -libainstall: all - @for i in $(LIBDIR) $(LIBP) $(LIBPL); \ - do \ - if test ! -d $$i; then \ - echo "Creating directory $$i"; \ - mkdir $$i; \ - chmod $(DIRMODE) $$i; \ - else true; \ - fi; \ - done - @if test -d $(LDLIBRARY); then :; else \ - $(INSTALL_DATA) $(LDLIBRARY) $(LIBPL)/$(LDLIBRARY) ; \ - $(RANLIB) $(LIBPL)/$(LDLIBRARY) ; \ - fi - $(INSTALL_DATA) Modules/config.c $(LIBPL)/config.c - $(INSTALL_DATA) Modules/python.o $(LIBPL)/python.o - $(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(LIBPL)/config.c.in - $(INSTALL_DATA) Modules/Makefile $(LIBPL)/Makefile - $(INSTALL_DATA) Modules/Setup $(LIBPL)/Setup - $(INSTALL_DATA) Modules/Setup.local $(LIBPL)/Setup.local - $(INSTALL_DATA) Modules/Setup.config $(LIBPL)/Setup.config - $(INSTALL_PROGRAM) $(srcdir)/Modules/makesetup $(LIBPL)/makesetup - $(INSTALL_PROGRAM) $(srcdir)/install-sh $(LIBPL)/install-sh - $(INSTALL_DATA) $(srcdir)/Misc/Makefile.pre.in $(LIBPL)/Makefile.pre.in - @if [ -s Modules/python.exp -a \ - "`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \ - echo; echo "Installing support files for building shared extension modules on AIX:"; \ - $(INSTALL_DATA) Modules/python.exp \ - $(LIBPL)/python.exp; \ - echo; echo "$(LIBPL)/python.exp"; \ - $(INSTALL_PROGRAM) $(srcdir)/Modules/makexp_aix \ - $(LIBPL)/makexp_aix; \ - echo "$(LIBPL)/makexp_aix"; \ - $(INSTALL_PROGRAM) $(srcdir)/Modules/ld_so_aix \ - $(LIBPL)/ld_so_aix; \ - echo "$(LIBPL)/ld_so_aix"; \ - echo; echo "See Misc/AIX-NOTES for details."; \ - else true; \ - fi - @case "$(MACHDEP)" in beos*) \ - echo; echo "Installing support files for building shared extension modules on BeOS:"; \ - $(INSTALL_DATA) BeOS/README $(LIBPL)/README; \ - echo; echo "$(LIBPL)/README"; \ - $(INSTALL_DATA) BeOS/README.readline-2.2 $(LIBPL)/README.readline-2.2; \ - echo "$(LIBPL)/README.readline-2.2"; \ - $(INSTALL_PROGRAM) BeOS/ar-fake $(LIBPL)/ar-fake; \ - echo "$(LIBPL)/ar-fake"; \ - $(INSTALL_PROGRAM) BeOS/linkmodule $(LIBPL)/linkmodule; \ - echo "$(LIBPL)/linkmodule"; \ - echo; echo "See BeOS/README for details."; \ - ;; \ - esac - -# Install the dynamically loadable modules -# This goes into $(exec_prefix) -sharedinstall: - ./python$(EXE) $(srcdir)/setup.py install -# Old rules for installing shared modules built using makesetup -oldsharedinstall: - cd Modules; $(MAKE) \ - OPT="$(OPT)" \ - VERSION="$(VERSION)" \ - SO="$(SO)" \ - LDSHARED="$(LDSHARED)" \ - CCSHARED="$(CCSHARED)" \ - LINKFORSHARED="$(LINKFORSHARED)" \ - DESTSHARED="$(DESTSHARED)" \ - prefix="$(prefix)" \ - exec_prefix="$(exec_prefix)" \ - sharedinstall - -# Build the sub-Makefiles -Makefiles: config.status Modules/Makefile.pre - (cd Modules; $(MAKE) -f Makefile.pre Makefile) - @for i in . $(SUBDIRS); do \ - (echo making Makefile in subdirectory $$i; cd $$i; \ - $(MAKE) Makefile); \ - done - -(rm -f Modules/hassignal; cd Modules; $(MAKE) hassignal) - -# Build the intermediate Makefile in Modules -Modules/Makefile.pre: config.status - $(SHELL) config.status - -# Build the toplevel Makefile -Makefile: Makefile.in config.status - CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) config.status - -# Run the configure script. If config.status already exists, -# call it with the --recheck argument, which reruns configure with the -# same options as it was run last time; otherwise run the configure -# script with options taken from the $(WITH) variable -config.status: $(srcdir)/configure - if test -f config.status; \ - then $(SHELL) config.status --recheck; \ - $(SHELL) config.status; \ - else $(SHELL) $(srcdir)/configure $(WITH); \ - fi - -.PRECIOUS: config.status python$(EXE) - -# Rerun configure with the same options as it was run last time, -# provided the config.status script exists -recheck: - $(SHELL) config.status --recheck - $(SHELL) config.status - -# Rebuild the configure script from configure.in; also rebuild config.h.in -autoconf: - (cd $(srcdir); autoconf) - (cd $(srcdir); autoheader) - -# Create a tags file for vi -tags:: - cd $(srcdir); \ - ctags -w -t Include/*.h; \ - for i in $(SUBDIRS); do ctags -w -t -a $$i/*.[ch]; \ - done; \ - sort tags -o tags - -# Create a tags file for GNU Emacs -TAGS:: - cd $(srcdir); \ - etags Include/*.h; \ - for i in $(SUBDIRS); do etags -a $$i/*.[ch]; done - -# Add dependencies to sub-Makefiles -depend: - @for i in $(SUBDIRS); do \ - (echo making depend in subdirectory $$i; cd $$i; \ - $(MAKE) depend); \ - done - -# Sanitation targets -- clean leaves libraries, executables and tags -# files, which clobber removes those as well - -localclean: - -rm -f core *~ [@,#]* *.old *.orig *.rej - -rm -rf build - -clean: localclean - -for i in $(SUBDIRS); do \ - if test -d $$i; then \ - (echo making clean in subdirectory $$i; cd $$i; \ - if test -f Makefile; \ - then $(MAKE) clean; \ - else $(MAKE) -f Makefile.*in clean; \ - fi); \ - else true; fi; \ - done - -localclobber: localclean - -rm -f tags TAGS python$(EXE) $(LIBRARY) $(LDLIBRARY) *.o - -rm -f config.log config.cache config.h - -clobber: localclobber - -for i in $(SUBDIRS); do \ - if test -d $$i; then \ - (echo clobbering subdirectory $$i; cd $$i; \ - if test -f Makefile; \ - then $(MAKE) clobber; \ - else $(MAKE) -f $(srcdir)/Makefile*.in clobber; \ - fi); \ - else true; fi; \ - done - -# Make things extra clean, before making a distribution: -# remove all generated files, even Makefile[.pre] -distclean: clobber - -$(MAKE) -f $(srcdir)/Makefile.in \ - SUBDIRS="$(SUBDIRSTOO)" clobber - -rm -f config.status config.log config.cache config.h Makefile - -rm -f buildno platform - -rm -f Modules/Makefile - -for i in $(SUBDIRS) $(SUBDIRSTOO); do \ - for f in $$i/*.in; do \ - f=`basename "$$f" .in`; \ - if test "$$f" != "*"; then \ - echo rm -f "$$i/$$f"; \ - rm -f "$$i/$$f"; \ - fi; \ - done; \ - done - -# Check for smelly exported symbols (not starting with Py/_Py) -smelly: all - for i in $(SUBDIRS); do \ - echo --- $$i ---; \ - nm -p $$i/lib$$i.a | \ - sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \ - done - -# Find files with funny names -funny: - find $(DISTDIRS) -type d \ - -o -name '*.[chs]' \ - -o -name '*.py' \ - -o -name '*.doc' \ - -o -name '*.sty' \ - -o -name '*.bib' \ - -o -name '*.dat' \ - -o -name '*.el' \ - -o -name '*.fd' \ - -o -name '*.in' \ - -o -name '*.tex' \ - -o -name '*,[vpt]' \ - -o -name 'Setup' \ - -o -name 'Setup.*' \ - -o -name README \ - -o -name Makefile \ - -o -name ChangeLog \ - -o -name Repository \ - -o -name Root \ - -o -name Entries \ - -o -name Tag \ - -o -name tags \ - -o -name TAGS \ - -o -name .cvsignore \ - -o -name MANIFEST \ - -o -print -# IF YOU PUT ANYTHING HERE IT WILL GO AWAY |