diff options
Diffstat (limited to 'Misc/RPM')
| -rw-r--r-- | Misc/RPM/README | 33 | ||||
| -rw-r--r-- | Misc/RPM/python-3.2.spec | 390 |
2 files changed, 0 insertions, 423 deletions
diff --git a/Misc/RPM/README b/Misc/RPM/README deleted file mode 100644 index d883c95..0000000 --- a/Misc/RPM/README +++ /dev/null @@ -1,33 +0,0 @@ -This directory contains support file used to build RPM releases of -Python. Its contents are maintained by Sean Reifschneider -<jafo@tummy.com>. - -If you wish to build RPMs from the base Python release tar-file, note -that you will have to download the -"doc/<version>/html-<version>.tar.bz2" -file from python.org and place it into your "SOURCES" directory for -the build to complete. This is the same directory that you place the -Python-2.3.1 release tar-file in. You can then use the ".spec" file in -this directory to build RPMs. - -You may also wish to pursue RPMs provided by distribution makers to see if -they have one suitable for your uses. If, for example, you just want a -slightly newer version of Python than what the distro provides, you could -pick up the closest SRPM your distro provides, and then modify it to -the newer version, and build that. It may be as simple as just changing -the "version" information in the spec file (or it may require fixing -patches). - -NOTE: I am *NOT* recommending just using the binary RPM, and never do an -install with "--force" or "--nodeps". - -Also worth pursuing may be newer versions provided by similar distros. For -example, a Python 3 SRPM from Fedora may be a good baseline to try building -on CentOS. - -Many newer SRPMs won't install on older distros because of format changes. -You can manually extract these SRPMS with: - - mkdir foo - cd foo - rpm2cpio <../python3-*.src.rpm | cpio -ivd diff --git a/Misc/RPM/python-3.2.spec b/Misc/RPM/python-3.2.spec deleted file mode 100644 index e0f94c5..0000000 --- a/Misc/RPM/python-3.2.spec +++ /dev/null @@ -1,390 +0,0 @@ -########################## -# User-modifiable configs -########################## - -# Is the resulting package and the installed binary named "python" or -# "python2"? -#WARNING: Commenting out doesn't work. Last line is what's used. -%define config_binsuffix none -%define config_binsuffix 2.6 - -# Build tkinter? "auto" enables it if /usr/bin/wish exists. -#WARNING: Commenting out doesn't work. Last line is what's used. -%define config_tkinter no -%define config_tkinter yes -%define config_tkinter auto - -# Use pymalloc? The last line (commented or not) determines wether -# pymalloc is used. -#WARNING: Commenting out doesn't work. Last line is what's used. -%define config_pymalloc no -%define config_pymalloc yes - -# Enable IPV6? -#WARNING: Commenting out doesn't work. Last line is what's used. -%define config_ipv6 yes -%define config_ipv6 no - -# Build shared libraries or .a library? -#WARNING: Commenting out doesn't work. Last line is what's used. -%define config_sharedlib no -%define config_sharedlib yes - -# Location of the HTML directory. -%define config_htmldir /var/www/html/python - -################################# -# End of user-modifiable configs -################################# - -%define name python -#--start constants-- -%define version 3.2.6 -%define libvers 3.2 -#--end constants-- -%define release 1pydotorg -%define __prefix /usr - -# kludge to get around rpm <percent>define weirdness -%define ipv6 %(if [ "%{config_ipv6}" = yes ]; then echo --enable-ipv6; else echo --disable-ipv6; fi) -%define pymalloc %(if [ "%{config_pymalloc}" = yes ]; then echo --with-pymalloc; else echo --without-pymalloc; fi) -%define binsuffix %(if [ "%{config_binsuffix}" = none ]; then echo ; else echo "%{config_binsuffix}"; fi) -%define include_tkinter %(if [ \\( "%{config_tkinter}" = auto -a -f /usr/bin/wish \\) -o "%{config_tkinter}" = yes ]; then echo 1; else echo 0; fi) -%define libdirname %(( uname -m | egrep -q '_64$' && [ -d /usr/lib64 ] && echo lib64 ) || echo lib) -%define sharedlib %(if [ "%{config_sharedlib}" = yes ]; then echo --enable-shared; else echo ; fi) -%define include_sharedlib %(if [ "%{config_sharedlib}" = yes ]; then echo 1; else echo 0; fi) - -# detect if documentation is available -%define include_docs %(if [ -f "%{_sourcedir}/html-%{version}.tar.bz2" ]; then echo 1; else echo 0; fi) - -Summary: An interpreted, interactive, object-oriented programming language. -Name: %{name}%{binsuffix} -Version: %{version} -Release: %{release} -License: PSF -Group: Development/Languages -Source: Python-%{version}.tar.bz2 -%if %{include_docs} -Source1: html-%{version}.tar.bz2 -%endif -BuildRoot: %{_tmppath}/%{name}-%{version}-root -BuildPrereq: expat-devel -BuildPrereq: db4-devel -BuildPrereq: gdbm-devel -BuildPrereq: sqlite-devel -Prefix: %{__prefix} -Packager: Sean Reifschneider <jafo-rpms@tummy.com> - -%description -Python is an interpreted, interactive, object-oriented programming -language. It incorporates modules, exceptions, dynamic typing, very high -level dynamic data types, and classes. Python combines remarkable power -with very clear syntax. It has interfaces to many system calls and -libraries, as well as to various window systems, and is extensible in C or -C++. It is also usable as an extension language for applications that need -a programmable interface. Finally, Python is portable: it runs on many -brands of UNIX, on PCs under Windows, MS-DOS, and OS/2, and on the -Mac. - -%package devel -Summary: The libraries and header files needed for Python extension development. -Prereq: python%{binsuffix} = %{PACKAGE_VERSION} -Group: Development/Libraries - -%description devel -The Python programming language's interpreter can be extended with -dynamically loaded extensions and can be embedded in other programs. -This package contains the header files and libraries needed to do -these types of tasks. - -Install python-devel if you want to develop Python extensions. The -python package will also need to be installed. You'll probably also -want to install the python-docs package, which contains Python -documentation. - -%if %{include_tkinter} -%package tkinter -Summary: A graphical user interface for the Python scripting language. -Group: Development/Languages -Prereq: python%{binsuffix} = %{PACKAGE_VERSION}-%{release} - -%description tkinter -The Tkinter (Tk interface) program is an graphical user interface for -the Python scripting language. - -You should install the tkinter package if you'd like to use a graphical -user interface for Python programming. -%endif - -%package tools -Summary: A collection of development tools included with Python. -Group: Development/Tools -Prereq: python%{binsuffix} = %{PACKAGE_VERSION}-%{release} - -%description tools -The Python package includes several development tools that are used -to build python programs. This package contains a selection of those -tools, including the IDLE Python IDE. - -Install python-tools if you want to use these tools to develop -Python programs. You will also need to install the python and -tkinter packages. - -%if %{include_docs} -%package docs -Summary: Python-related documentation. -Group: Development/Documentation - -%description docs -Documentation relating to the Python programming language in HTML and info -formats. -%endif - -%changelog -* Mon Dec 20 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.4-2pydotorg] -- Changing the idle wrapper so that it passes arguments to idle. - -* Tue Oct 19 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.4b1-1pydotorg] -- Updating to 2.4. - -* Thu Jul 22 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.4-3pydotorg] -- Paul Tiemann fixes for %{prefix}. -- Adding permission changes for directory as suggested by reimeika.ca -- Adding code to detect when it should be using lib64. -- Adding a define for the location of /var/www/html for docs. - -* Thu May 27 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.4-2pydotorg] -- Including changes from Ian Holsman to build under Red Hat 7.3. -- Fixing some problems with the /usr/local path change. - -* Sat Mar 27 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.2-3pydotorg] -- Being more agressive about finding the paths to fix for - #!/usr/local/bin/python. - -* Sat Feb 07 2004 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.3-2pydotorg] -- Adding code to remove "#!/usr/local/bin/python" from particular files and - causing the RPM build to terminate if there are any unexpected files - which have that line in them. - -* Mon Oct 13 2003 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.2-1pydotorg] -- Adding code to detect wether documentation is available to build. - -* Fri Sep 19 2003 Sean Reifschneider <jafo-rpms@tummy.com> [2.3.1-1pydotorg] -- Updating to the 2.3.1 release. - -* Mon Feb 24 2003 Sean Reifschneider <jafo-rpms@tummy.com> [2.3b1-1pydotorg] -- Updating to 2.3b1 release. - -* Mon Feb 17 2003 Sean Reifschneider <jafo-rpms@tummy.com> [2.3a1-1] -- Updating to 2.3 release. - -* Sun Dec 23 2001 Sean Reifschneider <jafo-rpms@tummy.com> -[Release 2.2-2] -- Added -docs package. -- Added "auto" config_tkinter setting which only enables tk if - /usr/bin/wish exists. - -* Sat Dec 22 2001 Sean Reifschneider <jafo-rpms@tummy.com> -[Release 2.2-1] -- Updated to 2.2. -- Changed the extension to "2" from "2.2". - -* Tue Nov 18 2001 Sean Reifschneider <jafo-rpms@tummy.com> -[Release 2.2c1-1] -- Updated to 2.2c1. - -* Thu Nov 1 2001 Sean Reifschneider <jafo-rpms@tummy.com> -[Release 2.2b1-3] -- Changed the way the sed for fixing the #! in pydoc works. - -* Wed Oct 24 2001 Sean Reifschneider <jafo-rpms@tummy.com> -[Release 2.2b1-2] -- Fixed missing "email" package, thanks to anonymous report on sourceforge. -- Fixed missing "compiler" package. - -* Mon Oct 22 2001 Sean Reifschneider <jafo-rpms@tummy.com> -[Release 2.2b1-1] -- Updated to 2.2b1. - -* Mon Oct 9 2001 Sean Reifschneider <jafo-rpms@tummy.com> -[Release 2.2a4-4] -- otto@balinor.mat.unimi.it mentioned that the license file is missing. - -* Sun Sep 30 2001 Sean Reifschneider <jafo-rpms@tummy.com> -[Release 2.2a4-3] -- Ignacio Vazquez-Abrams pointed out that I had a spruious double-quote in - the spec files. Thanks. - -* Wed Jul 25 2001 Sean Reifschneider <jafo-rpms@tummy.com> -[Release 2.2a1-1] -- Updated to 2.2a1 release. -- Changed idle and pydoc to use binsuffix macro - -####### -# PREP -####### -%prep -%setup -n Python-%{version} - -######## -# BUILD -######## -%build -echo "Setting for ipv6: %{ipv6}" -echo "Setting for pymalloc: %{pymalloc}" -echo "Setting for binsuffix: %{binsuffix}" -echo "Setting for include_tkinter: %{include_tkinter}" -echo "Setting for libdirname: %{libdirname}" -echo "Setting for sharedlib: %{sharedlib}" -echo "Setting for include_sharedlib: %{include_sharedlib}" -./configure --enable-unicode=ucs4 %{sharedlib} %{ipv6} %{pymalloc} --prefix=%{__prefix} -make - -########## -# INSTALL -########## -%install -# set the install path -echo '[install_scripts]' >setup.cfg -echo 'install_dir='"${RPM_BUILD_ROOT}%{__prefix}/bin" >>setup.cfg - -[ -d "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT -mkdir -p $RPM_BUILD_ROOT%{__prefix}/%{libdirname}/python%{libvers}/lib-dynload -make prefix=$RPM_BUILD_ROOT%{__prefix} install - -# REPLACE PATH IN PYDOC -if [ ! -z "%{binsuffix}" ] -then - ( - cd $RPM_BUILD_ROOT%{__prefix}/bin - mv pydoc pydoc.old - sed 's|#!.*|#!%{__prefix}/bin/env python'%{binsuffix}'|' \ - pydoc.old >pydoc - chmod 755 pydoc - rm -f pydoc.old - ) -fi - -# add the binsuffix -if [ ! -z "%{binsuffix}" ] -then - rm -f $RPM_BUILD_ROOT%{__prefix}/bin/python[0-9a-zA-Z]* - ( cd $RPM_BUILD_ROOT%{__prefix}/bin; - for file in *; do mv "$file" "$file"%{binsuffix}; done ) - ( cd $RPM_BUILD_ROOT%{_mandir}/man1; mv python.1 python%{binsuffix}.1 ) -fi - -######## -# Tools -echo '#!%{__prefix}/bin/env python%{binsuffix}' >${RPM_BUILD_ROOT}%{__prefix}/bin/idle%{binsuffix} -echo 'import os, sys' >>${RPM_BUILD_ROOT}%{__prefix}/bin/idle%{binsuffix} -echo 'os.execvp("%{__prefix}/bin/python%{binsuffix}", ["%{__prefix}/bin/python%{binsuffix}", "%{__prefix}/lib/python%{libvers}/idlelib/idle.py"] + sys.argv[1:])' >>${RPM_BUILD_ROOT}%{__prefix}/bin/idle%{binsuffix} -echo 'print "Failed to exec Idle"' >>${RPM_BUILD_ROOT}%{__prefix}/bin/idle%{binsuffix} -echo 'sys.exit(1)' >>${RPM_BUILD_ROOT}%{__prefix}/bin/idle%{binsuffix} -chmod 755 $RPM_BUILD_ROOT%{__prefix}/bin/idle%{binsuffix} -cp -a Tools $RPM_BUILD_ROOT%{__prefix}/%{libdirname}/python%{libvers} - -# MAKE FILE LISTS -rm -f mainpkg.files -find "$RPM_BUILD_ROOT""%{__prefix}"/%{libdirname}/python%{libvers} -type f | - sed "s|^${RPM_BUILD_ROOT}|/|" | - grep -v -e '/python%{libvers}/config$' -e '_tkinter.so$' >mainpkg.files -find "$RPM_BUILD_ROOT""%{__prefix}"/bin -type f -o -type l | - sed "s|^${RPM_BUILD_ROOT}|/|" | - grep -v -e '/bin/2to3%{binsuffix}$' | - grep -v -e '/bin/pydoc%{binsuffix}$' | - grep -v -e '/bin/smtpd.py%{binsuffix}$' | - grep -v -e '/bin/idle%{binsuffix}$' >>mainpkg.files - -rm -f tools.files -find "$RPM_BUILD_ROOT""%{__prefix}"/%{libdirname}/python%{libvers}/idlelib \ - "$RPM_BUILD_ROOT""%{__prefix}"/%{libdirname}/python%{libvers}/Tools -type f | - sed "s|^${RPM_BUILD_ROOT}|/|" >tools.files -echo "%{__prefix}"/bin/2to3%{binsuffix} >>tools.files -echo "%{__prefix}"/bin/pydoc%{binsuffix} >>tools.files -echo "%{__prefix}"/bin/smtpd.py%{binsuffix} >>tools.files -echo "%{__prefix}"/bin/idle%{binsuffix} >>tools.files - -###### -# Docs -%if %{include_docs} -mkdir -p "$RPM_BUILD_ROOT"%{config_htmldir} -( - cd "$RPM_BUILD_ROOT"%{config_htmldir} - bunzip2 < %{SOURCE1} | tar x -) -%endif - -# fix the #! line in installed files -find "$RPM_BUILD_ROOT" -type f -print0 | - xargs -0 grep -l /usr/local/bin/python | while read file -do - FIXFILE="$file" - sed 's|^#!.*python|#!%{__prefix}/bin/env python'"%{binsuffix}"'|' \ - "$FIXFILE" >/tmp/fix-python-path.$$ - cat /tmp/fix-python-path.$$ >"$FIXFILE" - rm -f /tmp/fix-python-path.$$ -done - -# check to see if there are any straggling #! lines -find "$RPM_BUILD_ROOT" -type f | xargs egrep -n '^#! */usr/local/bin/python' \ - | grep ':1:#!' >/tmp/python-rpm-files.$$ || true -if [ -s /tmp/python-rpm-files.$$ ] -then - echo '*****************************************************' - cat /tmp/python-rpm-files.$$ - cat <<@EOF - ***************************************************** - There are still files referencing /usr/local/bin/python in the - install directory. They are listed above. Please fix the .spec - file and try again. If you are an end-user, you probably want - to report this to jafo-rpms@tummy.com as well. - ***************************************************** -@EOF - rm -f /tmp/python-rpm-files.$$ - exit 1 -fi -rm -f /tmp/python-rpm-files.$$ - -######## -# CLEAN -######## -%clean -[ -n "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != / ] && rm -rf $RPM_BUILD_ROOT -rm -f mainpkg.files tools.files - -######## -# FILES -######## -%files -f mainpkg.files -%defattr(-,root,root) -%doc Misc/README Misc/cheatsheet Misc/Porting -%doc LICENSE Misc/ACKS Misc/HISTORY Misc/NEWS -%{_mandir}/man1/python%{binsuffix}.1* - -%attr(755,root,root) %dir %{__prefix}/include/python%{libvers} -%attr(755,root,root) %dir %{__prefix}/%{libdirname}/python%{libvers}/ -%if %{include_sharedlib} -%{__prefix}/%{libdirname}/libpython* -%endif - -%files devel -%defattr(-,root,root) -%{__prefix}/include/python%{libvers}/*.h -%{__prefix}/%{libdirname}/python%{libvers}/config - -%files -f tools.files tools -%defattr(-,root,root) - -%if %{include_tkinter} -%files tkinter -%defattr(-,root,root) -%{__prefix}/%{libdirname}/python%{libvers}/tkinter -%{__prefix}/%{libdirname}/python%{libvers}/lib-dynload/_tkinter.so* -%endif - -%if %{include_docs} -%files docs -%defattr(-,root,root) -%{config_htmldir}/* -%endif |