diff options
Diffstat (limited to 'Modules/zlib/make_vms.com')
| -rw-r--r-- | Modules/zlib/make_vms.com | 403 |
1 files changed, 233 insertions, 170 deletions
diff --git a/Modules/zlib/make_vms.com b/Modules/zlib/make_vms.com index 6576490..65e9d0c 100644 --- a/Modules/zlib/make_vms.com +++ b/Modules/zlib/make_vms.com @@ -3,7 +3,7 @@ $! Martin P.J. Zinser $! $! In case of problems with the install you might contact me at $! zinser@zinser.no-ip.info(preferred) or -$! zinser@sysdev.deutsche-boerse.com (work) +$! martin.zinser@eurexchange.com (work) $! $! Make procedure history for Zlib $! @@ -14,9 +14,16 @@ $! 0.02 20061008 Adapt to new Makefile.in $! 0.03 20091224 Add support for large file check $! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite $! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in +$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples +$! subdir path, update module search in makefile.in +$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned +$! shared image creation +$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared +$! image +$! 0.09 20120305 SMS. P1 sets builder ("MMK", "MMS", " " (built-in)). +$! "" -> automatic, preference: MMK, MMS, built-in. $! $ on error then goto err_exit -$ set proc/parse=ext $! $ true = 1 $ false = 0 @@ -32,31 +39,43 @@ $ s_case = False $! $! Setup variables holding "config" information $! -$ Make = "" +$ Make = "''p1'" $ name = "Zlib" $ version = "?.?.?" $ v_string = "ZLIB_VERSION" $ v_file = "zlib.h" -$ ccopt = "" +$ ccopt = "/include = []" $ lopts = "" $ dnsrl = "" -$ aconf_in_file = "zconf.h.in#zconf.h_in" +$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in" $ conf_check_string = "" $ linkonly = false $ optfile = name + ".opt" +$ mapfile = name + ".map" $ libdefs = "" +$ vax = f$getsyi("HW_MODEL").lt.1024 $ axp = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096 +$ ia64 = f$getsyi("HW_MODEL").ge.4096 $! -$ whoami = f$parse(f$enviornment("Procedure"),,,,"NO_CONCEAL") +$! 2012-03-05 SMS. +$! Why is this needed? And if it is needed, why not simply ".not. vax"? +$! +$!!! if axp .or. ia64 then set proc/parse=extended +$! +$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL") $ mydef = F$parse(whoami,,,"DEVICE") $ mydir = f$parse(whoami,,,"DIRECTORY") - "][" $ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type") $! $! Check for MMK/MMS $! -$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS" -$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK" -$! +$ if (Make .eqs. "") +$ then +$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS" +$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK" +$ else +$ Make = f$edit( Make, "trim") +$ endif $! $ gosub find_version $! @@ -69,6 +88,7 @@ $! Look for the compiler used $! $ gosub check_compiler $ close topt +$ close optf $! $ if its_decc $ then @@ -83,6 +103,15 @@ $ ccopt = "/decc" + ccopt $ define sys decc$library_include: $ endif $ endif +$! +$! 2012-03-05 SMS. +$! Why /NAMES = AS_IS? Why not simply ".not. vax"? And why not on VAX? +$! +$ if axp .or. ia64 +$ then +$ ccopt = ccopt + "/name=as_is/opt=(inline=speed)" +$ s_case = true +$ endif $ endif $ if its_vaxc .or. its_gnuc $ then @@ -122,15 +151,20 @@ $ gosub check_config $ endif $ goto aconf_loop $ACONF_EXIT: +$ write aconf "" +$ write aconf "/* VMS specifics added by make_vms.com: */" $ write aconf "#define VMS 1" $ write aconf "#include <unistd.h>" $ write aconf "#include <unixio.h>" $ write aconf "#ifdef _LARGEFILE" -$ write aconf "#define off64_t __off64_t" -$ write aconf "#define fopen64 fopen" -$ write aconf "#define fseeko64 fseeko" -$ write aconf "#define lseek64 lseek" -$ write aconf "#define ftello64 ftell" +$ write aconf "# define off64_t __off64_t" +$ write aconf "# define fopen64 fopen" +$ write aconf "# define fseeko64 fseeko" +$ write aconf "# define lseek64 lseek" +$ write aconf "# define ftello64 ftell" +$ write aconf "#endif" +$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)" +$ write aconf "# define HAVE_VSNPRINTF" $ write aconf "#endif" $ close aconf_in $ close aconf @@ -139,8 +173,9 @@ $! Build the thing plain or with mms $! $ write sys$output "Compiling Zlib sources ..." $ if make.eqs."" -$ then -$ dele example.obj;*,minigzip.obj;* +$ then +$ if (f$search( "example.obj;*") .nes. "") then delete example.obj;* +$ if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;* $ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" - adler32.c zlib.h zconf.h $ CALL MAKE compress.OBJ "CC ''CCOPT' compress" - @@ -174,41 +209,34 @@ $ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" - $ write sys$output "Building Zlib ..." $ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ $ write sys$output "Building example..." -$ CALL MAKE example.OBJ "CC ''CCOPT' example" - - example.c zlib.h zconf.h +$ CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" - + [.test]example.c zlib.h zconf.h $ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb -$ if f$search("x11vms:xvmsutils.olb") .nes. "" -$ then -$ write sys$output "Building minigzip..." -$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" - - minigzip.c zlib.h zconf.h -$ call make minigzip.exe - - "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" - - minigzip.obj libz.olb -$ endif -$ else +$ write sys$output "Building minigzip..." +$ CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" - + [.test]minigzip.c zlib.h zconf.h +$ call make minigzip.exe - + "LINK minigzip,libz.olb/lib" - + minigzip.obj libz.olb +$ else $ gosub crea_mms $ write sys$output "Make ''name' ''version' with ''Make' " $ 'make' -$ endif +$ endif $! -$! Alpha gets a shareable image +$! Create shareable image $! -$ If axp -$ Then -$ gosub crea_olist -$ write sys$output "Creating libzshr.exe" -$ call anal_obj_axp modules.opt _link.opt -$ if s_case -$ then -$ open/append optf modules.opt -$ write optf "case_sensitive=YES" -$ close optf -$ endif -$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,_link.opt/opt -$ endif +$ gosub crea_olist +$ write sys$output "Creating libzshr.exe" +$ call map_2_shopt 'mapfile' 'optfile' +$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt $ write sys$output "Zlib build completed" +$ delete/nolog tmp.opt;* $ exit +$AMISS_ERR: +$ write sys$output "No source for config.hin found." +$ write sys$output "Tried any of ''aconf_in_file'" +$ goto err_exit $CC_ERR: $ write sys$output "C compiler required to build ''name'" $ goto err_exit @@ -216,7 +244,6 @@ $ERR_EXIT: $ set message/facil/ident/sever/text $ close/nolog optf $ close/nolog topt -$ close/nolog conf_hin $ close/nolog aconf_in $ close/nolog aconf $ close/nolog out @@ -397,7 +424,7 @@ $ copy sys$input: out $ deck # descrip.mms: MMS description file for building zlib on VMS # written by Martin P.J. Zinser -# <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com> +# <zinser@zinser.no-ip.info or martin.zinser@eurexchange.com> OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\ gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\ @@ -407,10 +434,9 @@ OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\ $ eod $ write out "CFLAGS=", ccopt $ write out "LOPTS=", lopts +$ write out "all : example.exe minigzip.exe libz.olb" $ copy sys$input: out $ deck - -all : example.exe minigzip.exe libz.olb @ write sys$output " Example applications available" libz.olb : libz.olb($(OBJS)) @@ -420,7 +446,7 @@ example.exe : example.obj libz.olb link $(LOPTS) example,libz.olb/lib minigzip.exe : minigzip.obj libz.olb - link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib + link $(LOPTS) minigzip,libz.olb/lib clean : delete *.obj;*,libz.olb;*,*.opt;*,*.exe;* @@ -431,7 +457,7 @@ adler32.obj : adler32.c zutil.h zlib.h zconf.h compress.obj : compress.c zlib.h zconf.h crc32.obj : crc32.c zutil.h zlib.h zconf.h deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h -example.obj : example.c zlib.h zconf.h +example.obj : [.test]example.c zlib.h zconf.h gzclose.obj : gzclose.c zutil.h zlib.h zconf.h gzlib.obj : gzlib.c zutil.h zlib.h zconf.h gzread.obj : gzread.c zutil.h zlib.h zconf.h @@ -439,7 +465,7 @@ gzwrite.obj : gzwrite.c zutil.h zlib.h zconf.h inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h inflate.obj : inflate.c zutil.h zlib.h zconf.h inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h -minigzip.obj : minigzip.c zlib.h zconf.h +minigzip.obj : [.test]minigzip.c zlib.h zconf.h trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h uncompr.obj : uncompr.c zlib.h zconf.h zutil.obj : zutil.c zutil.h zlib.h zconf.h @@ -455,13 +481,18 @@ $! $CREA_OLIST: $ open/read min makefile.in $ open/write mod modules.opt -$ src_check = "OBJC =" +$ src_check_list = "OBJZ =#OBJG =" $MRLOOP: $ read/end=mrdone min rec -$ if (f$extract(0,6,rec) .nes. src_check) then goto mrloop +$ i = 0 +$SRC_CHECK_LOOP: +$ src_check = f$element(i, "#", src_check_list) +$ i = i+1 +$ if src_check .eqs. "#" then goto mrloop +$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop $ rec = rec - src_check $ gosub extra_filnam -$ if (f$element(1,"\",rec) .eqs. "\") then goto mrdone +$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop $MRSLOOP: $ read/end=mrdone min rec $ gosub extra_filnam @@ -672,133 +703,165 @@ $ endif $ return $!------------------------------------------------------------------------------ $! -$! Analyze Object files for OpenVMS AXP to extract Procedure and Data -$! information to build a symbol vector for a shareable image -$! All the "brains" of this logic was suggested by Hartmut Becker -$! (Hartmut.Becker@compaq.com). All the bugs were introduced by me -$! (zinser@zinser.no-ip.info), so if you do have problem reports please do not -$! bother Hartmut/HP, but get in touch with me +$! Write configuration to both permanent and temporary config file $! $! Version history -$! 0.01 20040406 Skip over shareable images in option file -$! 0.02 20041109 Fix option file for shareable images with case_sensitive=YES -$! 0.03 20050107 Skip over Identification labels in option file -$! 0.04 20060117 Add uppercase alias to code compiled with /name=as_is +$! 0.01 20031029 First version to receive a number +$! +$WRITE_CONFIG: SUBROUTINE +$ write aconf 'p1' +$ open/append confh 'th' +$ write confh 'p1' +$ close confh +$ENDSUBROUTINE +$!------------------------------------------------------------------------------ +$! +$! Analyze the project map file and create the symbol vector for a shareable +$! image from it +$! +$! Version history +$! 0.01 20120128 First version +$! 0.02 20120226 Add pre-load logic +$! +$ MAP_2_SHOPT: Subroutine $! -$ ANAL_OBJ_AXP: Subroutine -$ V = 'F$Verify(0) $ SAY := "WRITE_ SYS$OUTPUT" -$ +$! $ IF F$SEARCH("''P1'") .EQS. "" $ THEN -$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available" -$ goto exit_aa +$ SAY "MAP_2_SHOPT-E-NOSUCHFILE: Error, inputfile ''p1' not available" +$ goto exit_m2s $ ENDIF $ IF "''P2'" .EQS. "" $ THEN -$ SAY "ANAL_OBJ_AXP: Error, no output file provided" -$ goto exit_aa +$ SAY "MAP_2_SHOPT: Error, no output file provided" +$ goto exit_m2s $ ENDIF -$ -$ open/read in 'p1 -$ create a.tmp -$ open/append atmp a.tmp -$ loop: -$ read/end=end_loop in line -$ if f$locate("/SHARE",f$edit(line,"upcase")) .lt. f$length(line) -$ then -$ write sys$output "ANAL_SKP_SHR-i-skipshare, ''line'" -$ goto loop -$ endif -$ if f$locate("IDENTIFICATION=",f$edit(line,"upcase")) .lt. f$length(line) -$ then -$ write sys$output "ANAL_OBJ_AXP-i-ident: Identification ", - - f$element(1,"=",line) -$ goto loop -$ endif -$ f= f$search(line) -$ if f .eqs. "" -$ then -$ write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'" -$ goto loop -$ endif -$ define/user sys$output nl: -$ define/user sys$error nl: -$ anal/obj/gsd 'f /out=x.tmp -$ open/read xtmp x.tmp -$ XLOOP: -$ read/end=end_xloop xtmp xline -$ xline = f$edit(xline,"compress") -$ write atmp xline -$ goto xloop -$ END_XLOOP: -$ close xtmp -$ goto loop -$ end_loop: -$ close in -$ close atmp -$ if f$search("a.tmp") .eqs. "" - - then $ exit -$ ! all global definitions -$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp -$ ! all procedures -$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp -$ search c.tmp "symbol:"/out=d.tmp -$ define/user sys$output nl: -$ edito/edt/command=sys$input d.tmp -sub/symbol: "/symbol_vector=(/whole -sub/"/=PROCEDURE)/whole -exit -$ ! all data -$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp -$ search e.tmp "symbol:"/out=f.tmp -$ define/user sys$output nl: -$ edito/edt/command=sys$input f.tmp -sub/symbol: "/symbol_vector=(/whole -sub/"/=DATA)/whole -exit -$ sort/nodupl d.tmp,f.tmp g.tmp -$ open/read raw_vector g.tmp -$ open/write case_vector 'p2' -$ RAWLOOP: -$ read/end=end_rawloop raw_vector raw_element -$ write case_vector raw_element -$ if f$locate("=PROCEDURE)",raw_element) .lt. f$length(raw_element) -$ then -$ name = f$element(1,"=",raw_element) - "(" -$ if f$edit(name,"UPCASE") .nes. name then - - write case_vector f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)", - - f$edit(name,"UPCASE"), name) -$ endif -$ if f$locate("=DATA)",raw_element) .lt. f$length(raw_element) +$! +$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary" +$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread" +$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary" +$ module4 = "inflateSync#uncompress#zlibVersion#compress" +$ open/read map 'p1 +$ if axp .or. ia64 $ then -$ name = f$element(1,"=",raw_element) - "(" -$ if f$edit(name,"UPCASE") .nes. name then - - write case_vector f$fao(" symbol_vector=(!AS/!AS=DATA)", - - f$edit(name,"UPCASE"), name) +$ open/write aopt a.opt +$ open/write bopt b.opt +$ write aopt " CASE_SENSITIVE=YES" +$ write bopt "SYMBOL_VECTOR= (-" +$ mod_sym_num = 1 +$ MOD_SYM_LOOP: +$ if f$type(module'mod_sym_num') .nes. "" +$ then +$ mod_in = 0 +$ MOD_SYM_IN: +$ shared_proc = f$element(mod_in, "#", module'mod_sym_num') +$ if shared_proc .nes. "#" +$ then +$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",- + f$edit(shared_proc,"upcase"),shared_proc) +$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc) +$ mod_in = mod_in + 1 +$ goto mod_sym_in +$ endif +$ mod_sym_num = mod_sym_num + 1 +$ goto mod_sym_loop +$ endif +$MAP_LOOP: +$ read/end=map_end map line +$ if (f$locate("{",line).lt. f$length(line)) .or. - + (f$locate("global:", line) .lt. f$length(line)) +$ then +$ proc = true +$ goto map_loop +$ endif +$ if f$locate("}",line).lt. f$length(line) then proc = false +$ if f$locate("local:", line) .lt. f$length(line) then proc = false +$ if proc +$ then +$ shared_proc = f$edit(line,"collapse") +$ chop_semi = f$locate(";", shared_proc) +$ if chop_semi .lt. f$length(shared_proc) then - + shared_proc = f$extract(0, chop_semi, shared_proc) +$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",- + f$edit(shared_proc,"upcase"),shared_proc) +$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc) +$ endif +$ goto map_loop +$MAP_END: +$ close/nolog aopt +$ close/nolog bopt +$ open/append libopt 'p2' +$ open/read aopt a.opt +$ open/read bopt b.opt +$ALOOP: +$ read/end=aloop_end aopt line +$ write libopt line +$ goto aloop +$ALOOP_END: +$ close/nolog aopt +$ sv = "" +$BLOOP: +$ read/end=bloop_end bopt svn +$ if (svn.nes."") +$ then +$ if (sv.nes."") then write libopt sv +$ sv = svn +$ endif +$ goto bloop +$BLOOP_END: +$ write libopt f$extract(0,f$length(sv)-2,sv), "-" +$ write libopt ")" +$ close/nolog bopt +$ delete/nolog/noconf a.opt;*,b.opt;* +$ else +$ if vax +$ then +$ open/append libopt 'p2' +$ mod_sym_num = 1 +$ VMOD_SYM_LOOP: +$ if f$type(module'mod_sym_num') .nes. "" +$ then +$ mod_in = 0 +$ VMOD_SYM_IN: +$ shared_proc = f$element(mod_in, "#", module'mod_sym_num') +$ if shared_proc .nes. "#" +$ then +$ write libopt f$fao("UNIVERSAL=!AS",- + f$edit(shared_proc,"upcase")) +$ mod_in = mod_in + 1 +$ goto vmod_sym_in +$ endif +$ mod_sym_num = mod_sym_num + 1 +$ goto vmod_sym_loop +$ endif +$VMAP_LOOP: +$ read/end=vmap_end map line +$ if (f$locate("{",line).lt. f$length(line)) .or. - + (f$locate("global:", line) .lt. f$length(line)) +$ then +$ proc = true +$ goto vmap_loop +$ endif +$ if f$locate("}",line).lt. f$length(line) then proc = false +$ if f$locate("local:", line) .lt. f$length(line) then proc = false +$ if proc +$ then +$ shared_proc = f$edit(line,"collapse") +$ chop_semi = f$locate(";", shared_proc) +$ if chop_semi .lt. f$length(shared_proc) then - + shared_proc = f$extract(0, chop_semi, shared_proc) +$ write libopt f$fao("UNIVERSAL=!AS",- + f$edit(shared_proc,"upcase")) +$ endif +$ goto vmap_loop +$VMAP_END: +$ else +$ write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)" +$ write sys$output "No options file created" +$ endif $ endif -$ goto rawloop -$ END_RAWLOOP: -$ close raw_vector -$ close case_vector -$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*,g.tmp;* -$ if f$search("x.tmp") .nes. "" - - then $ delete x.tmp;* -$! -$ EXIT_AA: -$ if V then set verify +$ EXIT_M2S: +$ close/nolog map +$ close/nolog libopt $ endsubroutine -$!------------------------------------------------------------------------------ -$! -$! Write configuration to both permanent and temporary config file -$! -$! Version history -$! 0.01 20031029 First version to receive a number -$! -$WRITE_CONFIG: SUBROUTINE -$ write aconf 'p1' -$ open/append confh 'th' -$ write confh 'p1' -$ close confh -$ENDSUBROUTINE -$!------------------------------------------------------------------------------ |