diff options
Diffstat (limited to 'Modules')
| -rw-r--r-- | Modules/Setup.dist | 31 | ||||
| -rw-r--r-- | Modules/_bsddb.c | 4246 | ||||
| -rw-r--r-- | Modules/bsddbmodule.c | 4 |
3 files changed, 4266 insertions, 15 deletions
diff --git a/Modules/Setup.dist b/Modules/Setup.dist index b8532ab..b4635cc 100644 --- a/Modules/Setup.dist +++ b/Modules/Setup.dist @@ -393,25 +393,30 @@ GLHACK=-Dclear=__GLclear #gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm -# Berkeley DB interface. +# Sleepycat Berkeley DB interface. # -# This requires the Berkeley DB code, see -# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz +# This requires the Sleepycat DB code, see http://www.sleepycat.com/ +# The minimum supported version of that library is 3.0. # -# Edit the variables DB and DBPORT to point to the db top directory +# Edit the variables DB and DBLIBVERto point to the db top directory # and the subdirectory of PORT where you built it. -# -# (See http://electricrain.com/greg/python/bsddb3/ for an interface to -# BSD DB 3.x.) - -# Note: If a db.h file is found by configure, bsddb will be enabled -# automatically via Setup.config.in. It only needs to be enabled here -# if it is not automatically enabled there; check the generated -# Setup.config before enabling it here. +#DB=/usr/local/BerkeleyDB.4.0 +#DBLIBVER=4.0 +#DBINC=$(DB)/include +#DBLIB=$(DB)/lib +#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER +# Historical Berkeley DB 1.85 +# +# This requires the Berkeley DB code, see +# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz +# +# This module is deprecated; the historical BSDDB library has bugs +# that can cause data corruption. If you can, use the Sleepycat library +# instead. #DB=/depot/sundry/src/berkeley-db/db.1.85 #DBPORT=$(DB)/PORT/irix.5.3 -#bsddb bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a +#bsddb185 bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a diff --git a/Modules/_bsddb.c b/Modules/_bsddb.c new file mode 100644 index 0000000..f3afdc9 --- /dev/null +++ b/Modules/_bsddb.c @@ -0,0 +1,4246 @@ +/*---------------------------------------------------------------------- + Copyright (c) 1999-2001, Digital Creations, Fredericksburg, VA, USA + and Andrew Kuchling. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + o Redistributions of source code must retain the above copyright + notice, this list of conditions, and the disclaimer that follows. + + o Redistributions in binary form must reproduce the above copyright + notice, this list of conditions, and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + o Neither the name of Digital Creations nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY DIGITAL CREATIONS AND CONTRIBUTORS *AS + IS* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DIGITAL + CREATIONS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + DAMAGE. +------------------------------------------------------------------------*/ + + +/* + * Handwritten code to wrap version 3.x of the Berkeley DB library, + * written to replace a SWIG-generated file. + * + * This module was started by Andrew Kuchling to remove the dependency + * on SWIG in a package by Gregory P. Smith <greg@electricrain.com> who + * based his work on a similar package by Robin Dunn <robin@alldunn.com> + * which wrapped Berkeley DB 2.7.x. + * + * Development of this module has now returned full circle back to + * Robin Dunn who is working in behalf of Digital Creations to complete + * the wrapping of the DB 3.x API and to build a solid unit test suite. + * + * This module contains 5 types: + * + * DB (Database) + * DBCursor (Database Cursor) + * DBEnv (database environment) + * DBTxn (An explicit database transaction) + * DBLock (A lock handle) + * + */ + +/* --------------------------------------------------------------------- */ + +/* + * Portions of this module, associated unit tests and build scripts are the + * result of a contract with The Written Word (http://thewrittenword.com/) + * Many thanks go out to them for causing me to raise the bar on quality and + * functionality, resulting in a better bsddb3 package for all of us to use. + * + * --Robin + */ + +/* --------------------------------------------------------------------- */ + +#include <Python.h> +#include <db.h> + +/* --------------------------------------------------------------------- */ +/* Various macro definitions */ + +#define PY_BSDDB_VERSION "3.4.0" + +/* 40 = 4.0, 33 = 3.3; this will break if the second number is > 9 */ +#define DBVER (DB_VERSION_MAJOR * 10 + DB_VERSION_MINOR) + +static char *orig_rcs_id = "/Id: _db.c,v 1.44 2002/06/07 18:24:00 greg Exp /"; +static char *rcs_id = "$Id$"; + + +#ifdef WITH_THREAD + +/* These are for when calling Python --> C */ +#define MYDB_BEGIN_ALLOW_THREADS Py_BEGIN_ALLOW_THREADS; +#define MYDB_END_ALLOW_THREADS Py_END_ALLOW_THREADS; + +/* and these are for calling C --> Python */ +static PyInterpreterState* _db_interpreterState = NULL; +#define MYDB_BEGIN_BLOCK_THREADS { \ + PyThreadState* prevState; \ + PyThreadState* newState; \ + PyEval_AcquireLock(); \ + newState = PyThreadState_New(_db_interpreterState); \ + prevState = PyThreadState_Swap(newState); + +#define MYDB_END_BLOCK_THREADS \ + newState = PyThreadState_Swap(prevState); \ + PyThreadState_Clear(newState); \ + PyEval_ReleaseLock(); \ + PyThreadState_Delete(newState); \ + } + +#else + +#define MYDB_BEGIN_ALLOW_THREADS +#define MYDB_END_ALLOW_THREADS +#define MYDB_BEGIN_BLOCK_THREADS +#define MYDB_END_BLOCK_THREADS + +#endif + + +/* What is the default behaviour when DB->get or DBCursor->get returns a + DB_NOTFOUND error? Return None or raise an exception? */ +#define GET_RETURNS_NONE_DEFAULT 1 + + +/* Should DB_INCOMPLETE be turned into a warning or an exception? */ +#define INCOMPLETE_IS_WARNING 1 + +/* --------------------------------------------------------------------- */ +/* Exceptions */ + +static PyObject* DBError; /* Base class, all others derive from this */ +static PyObject* DBKeyEmptyError; /* DB_KEYEMPTY */ +static PyObject* DBKeyExistError; /* DB_KEYEXIST */ +static PyObject* DBLockDeadlockError; /* DB_LOCK_DEADLOCK */ +static PyObject* DBLockNotGrantedError; /* DB_LOCK_NOTGRANTED */ +static PyObject* DBNotFoundError; /* DB_NOTFOUND: also derives from KeyError */ +static PyObject* DBOldVersionError; /* DB_OLD_VERSION */ +static PyObject* DBRunRecoveryError; /* DB_RUNRECOVERY */ +static PyObject* DBVerifyBadError; /* DB_VERIFY_BAD */ +static PyObject* DBNoServerError; /* DB_NOSERVER */ +static PyObject* DBNoServerHomeError; /* DB_NOSERVER_HOME */ +static PyObject* DBNoServerIDError; /* DB_NOSERVER_ID */ +#if (DBVER >= 33) +static PyObject* DBPageNotFoundError; /* DB_PAGE_NOTFOUND */ +static PyObject* DBSecondaryBadError; /* DB_SECONDARY_BAD */ +#endif + +#if !INCOMPLETE_IS_WARNING +static PyObject* DBIncompleteError; /* DB_INCOMPLETE */ +#endif + +static PyObject* DBInvalidArgError; /* EINVAL */ +static PyObject* DBAccessError; /* EACCES */ +static PyObject* DBNoSpaceError; /* ENOSPC */ +static PyObject* DBNoMemoryError; /* ENOMEM */ +static PyObject* DBAgainError; /* EAGAIN */ +static PyObject* DBBusyError; /* EBUSY */ +static PyObject* DBFileExistsError; /* EEXIST */ +static PyObject* DBNoSuchFileError; /* ENOENT */ +static PyObject* DBPermissionsError; /* EPERM */ + + + +/* --------------------------------------------------------------------- */ +/* Structure definitions */ + +typedef struct { + PyObject_HEAD + DB_ENV* db_env; + int flags; /* saved flags from open() */ + int closed; + int getReturnsNone; +} DBEnvObject; + + +typedef struct { + PyObject_HEAD + DB* db; + DBEnvObject* myenvobj; /* PyObject containing the DB_ENV */ + int flags; /* saved flags from open() */ + int setflags; /* saved flags from set_flags() */ + int haveStat; + int getReturnsNone; +#if (DBVER >= 33) + PyObject* associateCallback; + int primaryDBType; +#endif +} DBObject; + + +typedef struct { + PyObject_HEAD + DBC* dbc; + DBObject* mydb; +} DBCursorObject; + + +typedef struct { + PyObject_HEAD + DB_TXN* txn; +} DBTxnObject; + + +typedef struct { + PyObject_HEAD + DB_LOCK lock; +} DBLockObject; + + + +staticforward PyTypeObject DB_Type, DBCursor_Type, DBEnv_Type, DBTxn_Type, DBLock_Type; + +#define DBObject_Check(v) ((v)->ob_type == &DB_Type) +#define DBCursorObject_Check(v) ((v)->ob_type == &DBCursor_Type) +#define DBEnvObject_Check(v) ((v)->ob_type == &DBEnv_Type) +#define DBTxnObject_Check(v) ((v)->ob_type == &DBTxn_Type) +#define DBLockObject_Check(v) ((v)->ob_type == &DBLock_Type) + + +/* --------------------------------------------------------------------- */ +/* Utility macros and functions */ + +#define RETURN_IF_ERR() \ + if (makeDBError(err)) { \ + return NULL; \ + } + +#define RETURN_NONE() Py_INCREF(Py_None); return Py_None; + +#define CHECK_DB_NOT_CLOSED(dbobj) \ + if (dbobj->db == NULL) { \ + PyErr_SetObject(DBError, Py_BuildValue("(is)", 0, \ + "DB object has been closed")); \ + return NULL; \ + } + +#define CHECK_ENV_NOT_CLOSED(env) \ + if (env->db_env == NULL) { \ + PyErr_SetObject(DBError, Py_BuildValue("(is)", 0, \ + "DBEnv object has been closed"));\ + return NULL; \ + } + +#define CHECK_CURSOR_NOT_CLOSED(curs) \ + if (curs->dbc == NULL) { \ + PyErr_SetObject(DBError, Py_BuildValue("(is)", 0, \ + "DBCursor object has been closed"));\ + return NULL; \ + } + + + +#define CHECK_DBFLAG(mydb, flag) (((mydb)->flags & (flag)) || \ + (((mydb)->myenvobj != NULL) && ((mydb)->myenvobj->flags & (flag)))) + +#define CLEAR_DBT(dbt) (memset(&(dbt), 0, sizeof(dbt))) + +#define FREE_DBT(dbt) if ((dbt.flags & (DB_DBT_MALLOC|DB_DBT_REALLOC)) && \ + dbt.data != NULL) { free(dbt.data); } + + +static int makeDBError(int err); + + +/* Return the access method type of the DBObject */ +static int _DB_get_type(DBObject* self) +{ +#if (DBVER >= 33) + DBTYPE type; + int err; + err = self->db->get_type(self->db, &type); + if (makeDBError(err)) { + return -1; + } + return type; +#else + return self->db->get_type(self->db); +#endif +} + + +/* Create a DBT structure (containing key and data values) from Python + strings. Returns 1 on success, 0 on an error. */ +static int make_dbt(PyObject* obj, DBT* dbt) +{ + CLEAR_DBT(*dbt); + if (obj == Py_None) { + /* no need to do anything, the structure has already been zeroed */ + } + else if (!PyArg_Parse(obj, "s#", &dbt->data, &dbt->size)) { + PyErr_SetString(PyExc_TypeError, + "Key and Data values must be of type string or None."); + return 0; + } + return 1; +} + + +/* Recno and Queue DBs can have integer keys. This function figures out + what's been given, verifies that it's allowed, and then makes the DBT. + + Caller should call FREE_DBT(key) when done. */ +static int make_key_dbt(DBObject* self, PyObject* keyobj, DBT* key, int* pflags) +{ + db_recno_t recno; + int type; + + CLEAR_DBT(*key); + if (keyobj == Py_None) { /* TODO: is None really okay for keys? */ + /* no need to do anything, the structure has already been zeroed */ + } + + else if (PyString_Check(keyobj)) { + /* verify access method type */ + type = _DB_get_type(self); + if (type == -1) + return 0; + if (type == DB_RECNO || type == DB_QUEUE) { + PyErr_SetString(PyExc_TypeError, "String keys not allowed for Recno and Queue DB's"); + return 0; + } + + key->data = PyString_AS_STRING(keyobj); + key->size = PyString_GET_SIZE(keyobj); + } + + else if (PyInt_Check(keyobj)) { + /* verify access method type */ + type = _DB_get_type(self); + if (type == -1) + return 0; + if (type == DB_BTREE && pflags != NULL) { + /* if BTREE then an Integer key is allowed with the DB_SET_RECNO flag */ + *pflags |= DB_SET_RECNO; + } + else if (type != DB_RECNO && type != DB_QUEUE) { + PyErr_SetString(PyExc_TypeError, "Integer keys only allowed for Recno and Queue DB's"); + return 0; + } + + /* Make a key out of the requested recno, use allocated space so DB will + be able to realloc room for the real key if needed. */ + recno = PyInt_AS_LONG(keyobj); + key->data = malloc(sizeof(db_recno_t)); + if (key->data == NULL) { + PyErr_SetString(PyExc_MemoryError, "Key memory allocation failed"); + return 0; + } + key->ulen = key->size = sizeof(db_recno_t); + memcpy(key->data, &recno, sizeof(db_recno_t)); + key->flags = DB_DBT_REALLOC; + } + else { + PyErr_Format(PyExc_TypeError, + "String or Integer object expected for key, %s found", + keyobj->ob_type->tp_name); + return 0; + } + + return 1; +} + + +/* Add partial record access to an existing DBT data struct. + If dlen and doff are set, then the DB_DBT_PARTIAL flag will be set + and the data storage/retrieval will be done using dlen and doff. */ +static int add_partial_dbt(DBT* d, int dlen, int doff) { + /* if neither were set we do nothing (-1 is the default value) */ + if ((dlen == -1) && (doff == -1)) { + return 1; + } + + if ((dlen < 0) || (doff < 0)) { + PyErr_SetString(PyExc_TypeError, "dlen and doff must both be >= 0"); + return 0; + } + + d->flags = d->flags | DB_DBT_PARTIAL; + d->dlen = (unsigned int) dlen; + d->doff = (unsigned int) doff; + return 1; +} + + +/* Callback used to save away more information about errors from the DB library. */ +static char _db_errmsg[1024]; +static void _db_errorCallback(const char* prefix, char* msg) +{ + strcpy(_db_errmsg, msg); +} + + +/* make a nice exception object to raise for errors. */ +static int makeDBError(int err) +{ + char errTxt[2048]; /* really big, just in case... */ + PyObject* errObj = NULL; + int exceptionRaised = 0; + + switch (err) { + case 0: /* successful, no error */ break; + + case DB_INCOMPLETE: +#if INCOMPLETE_IS_WARNING + strcpy(errTxt, db_strerror(err)); + if (_db_errmsg[0]) { + strcat(errTxt, " -- "); + strcat(errTxt, _db_errmsg); + _db_errmsg[0] = 0; + } +#if PYTHON_API_VERSION >= 1010 /* if Python 2.1 or better use warning framework */ + exceptionRaised = PyErr_Warn(PyExc_RuntimeWarning, errTxt); +#else + fprintf(stderr, errTxt); + fprintf(stderr, "\n"); +#endif + +#else /* do an exception instead */ + errObj = DBIncompleteError; +#endif + break; + + case DB_KEYEMPTY: errObj = DBKeyEmptyError; break; + case DB_KEYEXIST: errObj = DBKeyExistError; break; + case DB_LOCK_DEADLOCK: errObj = DBLockDeadlockError; break; + case DB_LOCK_NOTGRANTED: errObj = DBLockNotGrantedError; break; + case DB_NOTFOUND: errObj = DBNotFoundError; break; + case DB_OLD_VERSION: errObj = DBOldVersionError; break; + case DB_RUNRECOVERY: errObj = DBRunRecoveryError; break; + case DB_VERIFY_BAD: errObj = DBVerifyBadError; break; + case DB_NOSERVER: errObj = DBNoServerError; break; + case DB_NOSERVER_HOME: errObj = DBNoServerHomeError; break; + case DB_NOSERVER_ID: errObj = DBNoServerIDError; break; +#if (DBVER >= 33) + case DB_PAGE_NOTFOUND: errObj = DBPageNotFoundError; break; + case DB_SECONDARY_BAD: errObj = DBSecondaryBadError; break; +#endif + + case EINVAL: errObj = DBInvalidArgError; break; + case EACCES: errObj = DBAccessError; break; + case ENOSPC: errObj = DBNoSpaceError; break; + case ENOMEM: errObj = DBNoMemoryError; break; + case EAGAIN: errObj = DBAgainError; break; + case EBUSY : errObj = DBBusyError; break; + case EEXIST: errObj = DBFileExistsError; break; + case ENOENT: errObj = DBNoSuchFileError; break; + case EPERM : errObj = DBPermissionsError; break; + + default: errObj = DBError; break; + } + + if (errObj != NULL) { + strcpy(errTxt, db_strerror(err)); + if (_db_errmsg[0]) { + strcat(errTxt, " -- "); + strcat(errTxt, _db_errmsg); + _db_errmsg[0] = 0; + } + PyErr_SetObject(errObj, Py_BuildValue("(is)", err, errTxt)); + } + + return ((errObj != NULL) || exceptionRaised); +} + + + +/* set a type exception */ +static void makeTypeError(char* expected, PyObject* found) +{ + PyErr_Format(PyExc_TypeError, "Expected %s argument, %s found.", + expected, found->ob_type->tp_name); +} + + +/* verify that an obj is either None or a DBTxn, and set the txn pointer */ +static int checkTxnObj(PyObject* txnobj, DB_TXN** txn) +{ + if (txnobj == Py_None || txnobj == NULL) { + *txn = NULL; + return 1; + } + if (DBTxnObject_Check(txnobj)) { + *txn = ((DBTxnObject*)txnobj)->txn; + return 1; + } + else + makeTypeError("DBTxn", txnobj); + return 0; +} + + +/* Delete a key from a database + Returns 0 on success, -1 on an error. */ +static int _DB_delete(DBObject* self, DB_TXN *txn, DBT *key, int flags) +{ + int err; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->del(self->db, txn, key, 0); + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + return -1; + } + self->haveStat = 0; + return 0; +} + + +/* Store a key into a database + Returns 0 on success, -1 on an error. */ +static int _DB_put(DBObject* self, DB_TXN *txn, DBT *key, DBT *data, int flags) +{ + int err; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->put(self->db, txn, key, data, flags); + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + return -1; + } + self->haveStat = 0; + return 0; +} + +/* Get a key/data pair from a cursor */ +static PyObject* _DBCursor_get(DBCursorObject* self, int extra_flags, + PyObject *args, PyObject *kwargs, char *format) +{ + int err; + PyObject* retval = NULL; + DBT key, data; + int dlen = -1; + int doff = -1; + int flags = 0; + char* kwnames[] = { "flags", "dlen", "doff", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, format, kwnames, + &flags, &dlen, &doff)) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + flags |= extra_flags; + CLEAR_DBT(key); + CLEAR_DBT(data); + if (CHECK_DBFLAG(self->mydb, DB_THREAD)) { + /* Tell BerkeleyDB to malloc the return value (thread safe) */ + data.flags = DB_DBT_MALLOC; + key.flags = DB_DBT_MALLOC; + } + if (!add_partial_dbt(&data, dlen, doff)) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_get(self->dbc, &key, &data, flags); + MYDB_END_ALLOW_THREADS; + + if ((err == DB_NOTFOUND) && self->mydb->getReturnsNone) { + Py_INCREF(Py_None); + retval = Py_None; + } + else if (makeDBError(err)) { + retval = NULL; + } + else { /* otherwise, success! */ + + /* if Recno or Queue, return the key as an Int */ + switch (_DB_get_type(self->mydb)) { + case -1: + retval = NULL; + break; + + case DB_RECNO: + case DB_QUEUE: + retval = Py_BuildValue("is#", *((db_recno_t*)key.data), + data.data, data.size); + break; + case DB_HASH: + case DB_BTREE: + default: + retval = Py_BuildValue("s#s#", key.data, key.size, + data.data, data.size); + break; + } + } + if (!err) { + FREE_DBT(key); + FREE_DBT(data); + } + return retval; +} + + +/* add an integer to a dictionary using the given name as a key */ +static void _addIntToDict(PyObject* dict, char *name, int value) +{ + PyObject* v = PyInt_FromLong((long) value); + if (!v || PyDict_SetItemString(dict, name, v)) + PyErr_Clear(); + + Py_XDECREF(v); +} + + + + +/* --------------------------------------------------------------------- */ +/* Allocators and deallocators */ + +static DBObject* +newDBObject(DBEnvObject* arg, int flags) +{ + DBObject* self; + DB_ENV* db_env = NULL; + int err; + +#if PYTHON_API_VERSION <= 1007 + /* 1.5 compatibility */ + self = PyObject_NEW(DBObject, &DB_Type); +#else + self = PyObject_New(DBObject, &DB_Type); +#endif + + if (self == NULL) + return NULL; + + self->haveStat = 0; + self->flags = 0; + self->setflags = 0; + self->myenvobj = NULL; +#if (DBVER >= 33) + self->associateCallback = NULL; + self->primaryDBType = 0; +#endif + + /* keep a reference to our python DBEnv object */ + if (arg) { + Py_INCREF(arg); + self->myenvobj = arg; + db_env = arg->db_env; + } + + if (self->myenvobj) + self->getReturnsNone = self->myenvobj->getReturnsNone; + else + self->getReturnsNone = GET_RETURNS_NONE_DEFAULT; + + MYDB_BEGIN_ALLOW_THREADS; + err = db_create(&self->db, db_env, flags); + self->db->set_errcall(self->db, _db_errorCallback); +#if (DBVER >= 33) + self->db->app_private = (void*)self; +#endif + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + if (self->myenvobj) { + Py_DECREF(self->myenvobj); + self->myenvobj = NULL; + } + self = NULL; + } + return self; +} + + +static void +DB_dealloc(DBObject* self) +{ + if (self->db != NULL) { + /* avoid closing a DB when its DBEnv has been closed out from under it */ + if (!self->myenvobj || + (self->myenvobj && self->myenvobj->db_env)) { + MYDB_BEGIN_ALLOW_THREADS; + self->db->close(self->db, 0); + MYDB_END_ALLOW_THREADS; +#if PYTHON_API_VERSION >= 1010 /* if Python 2.1 or better use warning framework */ + } else { + PyErr_Warn(PyExc_RuntimeWarning, + "DB could not be closed in destructor: DBEnv already closed"); +#endif + } + self->db = NULL; + } + if (self->myenvobj) { + Py_DECREF(self->myenvobj); + self->myenvobj = NULL; + } +#if (DBVER >= 33) + if (self->associateCallback != NULL) { + Py_DECREF(self->associateCallback); + self->associateCallback = NULL; + } +#endif +#if PYTHON_API_VERSION <= 1007 + PyMem_DEL(self); +#else + PyObject_Del(self); +#endif +} + + +static DBCursorObject* +newDBCursorObject(DBC* dbc, DBObject* db) +{ + DBCursorObject* self; +#if PYTHON_API_VERSION <= 1007 + self = PyObject_NEW(DBCursorObject, &DBCursor_Type); +#else + self = PyObject_New(DBCursorObject, &DBCursor_Type); +#endif + if (self == NULL) + return NULL; + + self->dbc = dbc; + self->mydb = db; + Py_INCREF(self->mydb); + return self; +} + + +static void +DBCursor_dealloc(DBCursorObject* self) +{ + int err; + if (self->dbc != NULL) { + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_close(self->dbc); + self->dbc = NULL; + MYDB_END_ALLOW_THREADS; + } + Py_XDECREF( self->mydb ); +#if PYTHON_API_VERSION <= 1007 + PyMem_DEL(self); +#else + PyObject_Del(self); +#endif +} + + +static DBEnvObject* +newDBEnvObject(int flags) +{ + int err; + DBEnvObject* self; +#if PYTHON_API_VERSION <= 1007 + self = PyObject_NEW(DBEnvObject, &DBEnv_Type); +#else + self = PyObject_New(DBEnvObject, &DBEnv_Type); +#endif + + if (self == NULL) + return NULL; + + self->closed = 1; + self->flags = flags; + self->getReturnsNone = GET_RETURNS_NONE_DEFAULT; + + MYDB_BEGIN_ALLOW_THREADS; + err = db_env_create(&self->db_env, flags); + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + self = NULL; + } + else { + self->db_env->set_errcall(self->db_env, _db_errorCallback); + } + return self; +} + + +static void +DBEnv_dealloc(DBEnvObject* self) +{ + if (!self->closed) { + MYDB_BEGIN_ALLOW_THREADS; + self->db_env->close(self->db_env, 0); + MYDB_END_ALLOW_THREADS; + } +#if PYTHON_API_VERSION <= 1007 + PyMem_DEL(self); +#else + PyObject_Del(self); +#endif +} + + +static DBTxnObject* +newDBTxnObject(DBEnvObject* myenv, DB_TXN *parent, int flags) +{ + int err; + DBTxnObject* self; + +#if PYTHON_API_VERSION <= 1007 + self = PyObject_NEW(DBTxnObject, &DBTxn_Type); +#else + self = PyObject_New(DBTxnObject, &DBTxn_Type); +#endif + if (self == NULL) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = myenv->db_env->txn_begin(myenv->db_env, parent, &(self->txn), flags); +#else + err = txn_begin(myenv->db_env, parent, &(self->txn), flags); +#endif + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + self = NULL; + } + return self; +} + + +static void +DBTxn_dealloc(DBTxnObject* self) +{ + /* XXX nothing to do for transaction objects?!? */ + + /* TODO: if it hasn't been commited, should we abort it? */ + +#if PYTHON_API_VERSION <= 1007 + PyMem_DEL(self); +#else + PyObject_Del(self); +#endif +} + + +static DBLockObject* +newDBLockObject(DBEnvObject* myenv, u_int32_t locker, DBT* obj, + db_lockmode_t lock_mode, int flags) +{ + int err; + DBLockObject* self; + +#if PYTHON_API_VERSION <= 1007 + self = PyObject_NEW(DBLockObject, &DBLock_Type); +#else + self = PyObject_New(DBLockObject, &DBLock_Type); +#endif + if (self == NULL) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = myenv->db_env->lock_get(myenv->db_env, locker, flags, obj, lock_mode, &self->lock); +#else + err = lock_get(myenv->db_env, locker, flags, obj, lock_mode, &self->lock); +#endif + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + self = NULL; + } + + return self; +} + + +static void +DBLock_dealloc(DBLockObject* self) +{ + /* TODO: if it hasn't been released, should we do it? */ + +#if PYTHON_API_VERSION <= 1007 + PyMem_DEL(self); +#else + PyObject_Del(self); +#endif +} + + +/* --------------------------------------------------------------------- */ +/* DB methods */ + +static PyObject* +DB_append(DBObject* self, PyObject* args) +{ + PyObject* txnobj = NULL; + PyObject* dataobj; + db_recno_t recno; + DBT key, data; + DB_TXN *txn = NULL; + + if (!PyArg_ParseTuple(args, "O|O:append", &dataobj, &txnobj)) + return NULL; + + CHECK_DB_NOT_CLOSED(self); + + /* make a dummy key out of a recno */ + recno = 0; + CLEAR_DBT(key); + key.data = &recno; + key.size = sizeof(recno); + key.ulen = key.size; + key.flags = DB_DBT_USERMEM; + + if (!make_dbt(dataobj, &data)) return NULL; + if (!checkTxnObj(txnobj, &txn)) return NULL; + + if (-1 == _DB_put(self, txn, &key, &data, DB_APPEND)) + return NULL; + + return PyInt_FromLong(recno); +} + + +#if (DBVER >= 33) + +static int +_db_associateCallback(DB* db, const DBT* priKey, const DBT* priData, DBT* secKey) +{ + int retval = DB_DONOTINDEX; + DBObject* secondaryDB = (DBObject*)db->app_private; + PyObject* callback = secondaryDB->associateCallback; + int type = secondaryDB->primaryDBType; + PyObject* key; + PyObject* data; + PyObject* args; + PyObject* result; + + + if (callback != NULL) { + MYDB_BEGIN_BLOCK_THREADS; + + if (type == DB_RECNO || type == DB_QUEUE) { + key = PyInt_FromLong( *((db_recno_t*)priKey->data)); + } + else { + key = PyString_FromStringAndSize(priKey->data, priKey->size); + } + data = PyString_FromStringAndSize(priData->data, priData->size); + args = PyTuple_New(2); + PyTuple_SET_ITEM(args, 0, key); /* steals reference */ + PyTuple_SET_ITEM(args, 1, data); /* steals reference */ + + result = PyEval_CallObject(callback, args); + + if (result == NULL) { + PyErr_Print(); + } + else if (result == Py_None) { + retval = DB_DONOTINDEX; + } + else if (PyInt_Check(result)) { + retval = PyInt_AsLong(result); + } + else if (PyString_Check(result)) { + char* data; + int size; + + CLEAR_DBT(*secKey); +#if PYTHON_API_VERSION <= 1007 + /* 1.5 compatibility */ + size = PyString_Size(result); + data = PyString_AsString(result); +#else + PyString_AsStringAndSize(result, &data, &size); +#endif + secKey->flags = DB_DBT_APPMALLOC; /* DB will free */ + secKey->data = malloc(size); /* TODO, check this */ + memcpy(secKey->data, data, size); + secKey->size = size; + retval = 0; + } + else { + PyErr_SetString(PyExc_TypeError, + "DB associate callback should return DB_DONOTINDEX or a string."); + PyErr_Print(); + } + + Py_DECREF(args); + if (result) { + Py_DECREF(result); + } + + MYDB_END_BLOCK_THREADS; + } + return retval; +} + + +static PyObject* +DB_associate(DBObject* self, PyObject* args, PyObject* kwargs) +{ + int err, flags=0; + DBObject* secondaryDB; + PyObject* callback; + char* kwnames[] = {"secondaryDB", "callback", "flags", NULL}; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "OO|i:associate", kwnames, + &secondaryDB, &callback, &flags)) + return NULL; + + CHECK_DB_NOT_CLOSED(self); + if (!DBObject_Check(secondaryDB)) { + makeTypeError("DB", (PyObject*)secondaryDB); + return NULL; + } + if (callback == Py_None) { + callback = NULL; + } + else if (!PyCallable_Check(callback)) { + makeTypeError("Callable", callback); + return NULL; + } + + /* Save a reference to the callback in the secondary DB. */ + if (self->associateCallback != NULL) { + Py_DECREF(self->associateCallback); + } + Py_INCREF(callback); + secondaryDB->associateCallback = callback; + secondaryDB->primaryDBType = _DB_get_type(self); + + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->associate(self->db, + secondaryDB->db, + _db_associateCallback, + flags); + MYDB_END_ALLOW_THREADS; + + if (err) { + Py_DECREF(self->associateCallback); + self->associateCallback = NULL; + secondaryDB->primaryDBType = 0; + } + + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +#endif + + +static PyObject* +DB_close(DBObject* self, PyObject* args) +{ + int err, flags=0; + if (!PyArg_ParseTuple(args,"|i:close", &flags)) + return NULL; + if (self->db != NULL) { + if (self->myenvobj) + CHECK_ENV_NOT_CLOSED(self->myenvobj); + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->close(self->db, flags); + MYDB_END_ALLOW_THREADS; + self->db = NULL; + RETURN_IF_ERR(); + } + RETURN_NONE(); +} + + +#if (DBVER >= 32) +static PyObject* +_DB_consume(DBObject* self, PyObject* args, PyObject* kwargs, int consume_flag) +{ + int err, flags=0, type; + PyObject* txnobj = NULL; + PyObject* retval = NULL; + DBT key, data; + DB_TXN *txn = NULL; + char* kwnames[] = { "txn", "flags", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|Oi:consume", kwnames, + &txnobj, &flags)) + return NULL; + + CHECK_DB_NOT_CLOSED(self); + type = _DB_get_type(self); + if (type == -1) + return NULL; + if (type != DB_QUEUE) { + PyErr_SetString(PyExc_TypeError, "Consume methods only allowed for Queue DB's"); + return NULL; + } + if (!checkTxnObj(txnobj, &txn)) + return NULL; + + CLEAR_DBT(key); + CLEAR_DBT(data); + if (CHECK_DBFLAG(self, DB_THREAD)) { + /* Tell BerkeleyDB to malloc the return value (thread safe) */ + data.flags = DB_DBT_MALLOC; + key.flags = DB_DBT_MALLOC; + } + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->get(self->db, txn, &key, &data, flags|consume_flag); + MYDB_END_ALLOW_THREADS; + + if ((err == DB_NOTFOUND) && self->getReturnsNone) { + err = 0; + Py_INCREF(Py_None); + retval = Py_None; + } + else if (!err) { + retval = Py_BuildValue("s#s#", key.data, key.size, data.data, data.size); + FREE_DBT(key); + FREE_DBT(data); + } + + RETURN_IF_ERR(); + return retval; +} + +static PyObject* +DB_consume(DBObject* self, PyObject* args, PyObject* kwargs, int consume_flag) +{ + return _DB_consume(self, args, kwargs, DB_CONSUME); +} + +static PyObject* +DB_consume_wait(DBObject* self, PyObject* args, PyObject* kwargs, int consume_flag) +{ + return _DB_consume(self, args, kwargs, DB_CONSUME_WAIT); +} +#endif + + + +static PyObject* +DB_cursor(DBObject* self, PyObject* args, PyObject* kwargs) +{ + int err, flags=0; + DBC* dbc; + PyObject* txnobj = NULL; + DB_TXN *txn = NULL; + char* kwnames[] = { "txn", "flags", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|Oi:cursor", kwnames, + &txnobj, &flags)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + if (!checkTxnObj(txnobj, &txn)) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->cursor(self->db, txn, &dbc, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + return (PyObject*) newDBCursorObject(dbc, self); +} + + +static PyObject* +DB_delete(DBObject* self, PyObject* args, PyObject* kwargs) +{ + PyObject* txnobj = NULL; + int flags = 0; + PyObject* keyobj; + DBT key; + DB_TXN *txn = NULL; + char* kwnames[] = { "key", "txn", "flags", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "O|Oi:delete", kwnames, + &keyobj, &txnobj, &flags)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + if (!make_key_dbt(self, keyobj, &key, NULL)) + return NULL; + if (!checkTxnObj(txnobj, &txn)) + return NULL; + + if (-1 == _DB_delete(self, txn, &key, 0)) + return NULL; + + FREE_DBT(key); + RETURN_NONE(); +} + + +static PyObject* +DB_fd(DBObject* self, PyObject* args) +{ + int err, the_fd; + + if (!PyArg_ParseTuple(args,":fd")) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->fd(self->db, &the_fd); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + return PyInt_FromLong(the_fd); +} + + +static PyObject* +DB_get(DBObject* self, PyObject* args, PyObject* kwargs) +{ + int err, flags=0; + PyObject* txnobj = NULL; + PyObject* keyobj; + PyObject* dfltobj = NULL; + PyObject* retval = NULL; + int dlen = -1; + int doff = -1; + DBT key, data; + DB_TXN *txn = NULL; + char* kwnames[] = { "key", "default", "txn", "flags", "dlen", "doff", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "O|OOiii:get", kwnames, + &keyobj, &dfltobj, &txnobj, &flags, &dlen, &doff)) + return NULL; + + CHECK_DB_NOT_CLOSED(self); + if (!make_key_dbt(self, keyobj, &key, &flags)) + return NULL; + if (!checkTxnObj(txnobj, &txn)) + return NULL; + + CLEAR_DBT(data); + if (CHECK_DBFLAG(self, DB_THREAD)) { + /* Tell BerkeleyDB to malloc the return value (thread safe) */ + data.flags = DB_DBT_MALLOC; + } + if (!add_partial_dbt(&data, dlen, doff)) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->get(self->db, txn, &key, &data, flags); + MYDB_END_ALLOW_THREADS; + + if ((err == DB_NOTFOUND) && (dfltobj != NULL)) { + err = 0; + Py_INCREF(dfltobj); + retval = dfltobj; + } + else if ((err == DB_NOTFOUND) && self->getReturnsNone) { + err = 0; + Py_INCREF(Py_None); + retval = Py_None; + } + else if (!err) { + if (flags & DB_SET_RECNO) /* return both key and data */ + retval = Py_BuildValue("s#s#", key.data, key.size, data.data, data.size); + else /* return just the data */ + retval = PyString_FromStringAndSize((char*)data.data, data.size); + FREE_DBT(key); + FREE_DBT(data); + } + + RETURN_IF_ERR(); + return retval; +} + + +/* Return size of entry */ +static PyObject* +DB_get_size(DBObject* self, PyObject* args, PyObject* kwargs) +{ + int err, flags=0; + PyObject* txnobj = NULL; + PyObject* keyobj; + PyObject* retval = NULL; + DBT key, data; + DB_TXN *txn = NULL; + char* kwnames[] = { "key", "txn", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "O|O:get_size", kwnames, + &keyobj, &txnobj)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + if (!make_key_dbt(self, keyobj, &key, &flags)) + return NULL; + if (!checkTxnObj(txnobj, &txn)) + return NULL; + CLEAR_DBT(data); + + /* We don't allocate any memory, forcing a ENOMEM error and thus + getting the record size. */ + data.flags = DB_DBT_USERMEM; + data.ulen = 0; + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->get(self->db, txn, &key, &data, flags); + MYDB_END_ALLOW_THREADS; + if (err == ENOMEM) { + retval = PyInt_FromLong((long)data.size); + err = 0; + } + + FREE_DBT(key); + FREE_DBT(data); + RETURN_IF_ERR(); + return retval; +} + + +static PyObject* +DB_get_both(DBObject* self, PyObject* args, PyObject* kwargs) +{ + int err, flags=0; + PyObject* txnobj = NULL; + PyObject* keyobj; + PyObject* dataobj; + PyObject* retval = NULL; + DBT key, data; + DB_TXN *txn = NULL; + char* kwnames[] = { "key", "data", "txn", "flags", NULL }; + + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "OO|Oi:get_both", kwnames, + &keyobj, &dataobj, &txnobj, &flags)) + return NULL; + + CHECK_DB_NOT_CLOSED(self); + if (!make_key_dbt(self, keyobj, &key, NULL)) + return NULL; + if (!make_dbt(dataobj, &data)) + return NULL; + if (!checkTxnObj(txnobj, &txn)) + return NULL; + + flags |= DB_GET_BOTH; + + if (CHECK_DBFLAG(self, DB_THREAD)) { + /* Tell BerkeleyDB to malloc the return value (thread safe) */ + data.flags = DB_DBT_MALLOC; + /* TODO: Is this flag needed? We're passing a data object that should + match what's in the DB, so there should be no need to malloc. + We run the risk of freeing something twice! Check this. */ + } + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->get(self->db, txn, &key, &data, flags); + MYDB_END_ALLOW_THREADS; + + if ((err == DB_NOTFOUND) && self->getReturnsNone) { + err = 0; + Py_INCREF(Py_None); + retval = Py_None; + } + else if (!err) { + retval = PyString_FromStringAndSize((char*)data.data, data.size); + FREE_DBT(data); /* Only if retrieval was successful */ + } + + FREE_DBT(key); + RETURN_IF_ERR(); + return retval; +} + + +static PyObject* +DB_get_byteswapped(DBObject* self, PyObject* args) +{ +#if (DBVER >= 33) + int err = 0; +#endif + int retval = -1; + + if (!PyArg_ParseTuple(args,":get_byteswapped")) + return NULL; + CHECK_DB_NOT_CLOSED(self); + +#if (DBVER >= 33) + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->get_byteswapped(self->db, &retval); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); +#else + MYDB_BEGIN_ALLOW_THREADS; + retval = self->db->get_byteswapped(self->db); + MYDB_END_ALLOW_THREADS; +#endif + return PyInt_FromLong(retval); +} + + +static PyObject* +DB_get_type(DBObject* self, PyObject* args) +{ + int type; + + if (!PyArg_ParseTuple(args,":get_type")) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + type = _DB_get_type(self); + MYDB_END_ALLOW_THREADS; + if (type == -1) + return NULL; + return PyInt_FromLong(type); +} + + +static PyObject* +DB_join(DBObject* self, PyObject* args) +{ + int err, flags=0; + int length, x; + PyObject* cursorsObj; + DBC** cursors; + DBC* dbc; + + + if (!PyArg_ParseTuple(args,"O|i:join", &cursorsObj, &flags)) + return NULL; + + CHECK_DB_NOT_CLOSED(self); + + if (!PySequence_Check(cursorsObj)) { + PyErr_SetString(PyExc_TypeError, "Sequence of DBCursor objects expected"); + return NULL; + } + + length = PyObject_Length(cursorsObj); + cursors = malloc((length+1) * sizeof(DBC*)); + cursors[length] = NULL; + for (x=0; x<length; x++) { + PyObject* item = PySequence_GetItem(cursorsObj, x); + if (!DBCursorObject_Check(item)) { + PyErr_SetString(PyExc_TypeError, "Sequence of DBCursor objects expected"); + free(cursors); + return NULL; + } + cursors[x] = ((DBCursorObject*)item)->dbc; + } + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->join(self->db, cursors, &dbc, flags); + MYDB_END_ALLOW_THREADS; + free(cursors); + RETURN_IF_ERR(); + + return (PyObject*) newDBCursorObject(dbc, self); +} + + +static PyObject* +DB_key_range(DBObject* self, PyObject* args, PyObject* kwargs) +{ + int err, flags=0; + PyObject* txnobj = NULL; + PyObject* keyobj; + DBT key; + DB_TXN *txn = NULL; + DB_KEY_RANGE range; + char* kwnames[] = { "key", "txn", "flags", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "O|Oi:key_range", kwnames, + &keyobj, &txnobj, &flags)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + if (!make_dbt(keyobj, &key)) /* BTree only, don't need to allow for an int key */ + return NULL; + if (!checkTxnObj(txnobj, &txn)) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->key_range(self->db, txn, &key, &range, flags); + MYDB_END_ALLOW_THREADS; + + RETURN_IF_ERR(); + return Py_BuildValue("ddd", range.less, range.equal, range.greater); +} + + +static PyObject* +DB_open(DBObject* self, PyObject* args, PyObject* kwargs) +{ + int err, type = DB_UNKNOWN, flags=0, mode=0660; + char* filename = NULL; + char* dbname = NULL; + char* kwnames[] = { "filename", "dbname", "dbtype", "flags", "mode", NULL }; + char* kwnames2[] = { "filename", "dbtype", "flags", "mode", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "z|ziii:open", kwnames, + &filename, &dbname, &type, &flags, &mode)) { + PyErr_Clear(); + type = DB_UNKNOWN; flags = 0; mode = 0660; + filename = NULL; dbname = NULL; + if (!PyArg_ParseTupleAndKeywords(args, kwargs,"z|iii:open", kwnames2, + &filename, &type, &flags, &mode)) + return NULL; + } + + if (NULL == self->db) { + PyErr_SetObject(DBError, Py_BuildValue("(is)", 0, + "Cannot call open() twice for DB object")); + return NULL; + } + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->open(self->db, filename, dbname, type, flags, mode); + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + self->db = NULL; + return NULL; + } + + self->flags = flags; + RETURN_NONE(); +} + + +static PyObject* +DB_put(DBObject* self, PyObject* args, PyObject* kwargs) +{ + int flags=0; + PyObject* txnobj = NULL; + int dlen = -1; + int doff = -1; + PyObject* keyobj, *dataobj, *retval; + DBT key, data; + DB_TXN *txn = NULL; + char* kwnames[] = { "key", "data", "txn", "flags", "dlen", "doff", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "OO|Oiii:put", kwnames, + &keyobj, &dataobj, &txnobj, &flags, &dlen, &doff)) + return NULL; + + CHECK_DB_NOT_CLOSED(self); + if (!make_key_dbt(self, keyobj, &key, NULL)) return NULL; + if (!make_dbt(dataobj, &data)) return NULL; + if (!add_partial_dbt(&data, dlen, doff)) return NULL; + if (!checkTxnObj(txnobj, &txn)) return NULL; + + if (-1 == _DB_put(self, txn, &key, &data, flags)) { + FREE_DBT(key); + return NULL; + } + + if (flags & DB_APPEND) + retval = PyInt_FromLong(*((db_recno_t*)key.data)); + else { + retval = Py_None; + Py_INCREF(retval); + } + FREE_DBT(key); + return retval; +} + + + +static PyObject* +DB_remove(DBObject* self, PyObject* args, PyObject* kwargs) +{ + char* filename; + char* database = NULL; + int err, flags=0; + char* kwnames[] = { "filename", "dbname", "flags", NULL}; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "s|zi:remove", kwnames, + &filename, &database, &flags)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->remove(self->db, filename, database, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + + +static PyObject* +DB_rename(DBObject* self, PyObject* args) +{ + char* filename; + char* database; + char* newname; + int err, flags=0; + + if (!PyArg_ParseTuple(args, "sss|i:rename", &filename, &database, &newname, &flags)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->rename(self->db, filename, database, newname, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_set_bt_minkey(DBObject* self, PyObject* args) +{ + int err, minkey; + + if (!PyArg_ParseTuple(args,"i:set_bt_minkey", &minkey )) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_bt_minkey(self->db, minkey); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_set_cachesize(DBObject* self, PyObject* args) +{ + int err; + int gbytes = 0, bytes = 0, ncache = 0; + + if (!PyArg_ParseTuple(args,"ii|i:set_cachesize", + &gbytes,&bytes,&ncache)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_cachesize(self->db, gbytes, bytes, ncache); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_set_flags(DBObject* self, PyObject* args) +{ + int err, flags; + + if (!PyArg_ParseTuple(args,"i:set_flags", &flags)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_flags(self->db, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + self->setflags |= flags; + RETURN_NONE(); +} + + +static PyObject* +DB_set_h_ffactor(DBObject* self, PyObject* args) +{ + int err, ffactor; + + if (!PyArg_ParseTuple(args,"i:set_h_ffactor", &ffactor)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_h_ffactor(self->db, ffactor); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_set_h_nelem(DBObject* self, PyObject* args) +{ + int err, nelem; + + if (!PyArg_ParseTuple(args,"i:set_h_nelem", &nelem)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_h_nelem(self->db, nelem); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_set_lorder(DBObject* self, PyObject* args) +{ + int err, lorder; + + if (!PyArg_ParseTuple(args,"i:set_lorder", &lorder)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_lorder(self->db, lorder); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_set_pagesize(DBObject* self, PyObject* args) +{ + int err, pagesize; + + if (!PyArg_ParseTuple(args,"i:set_pagesize", &pagesize)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_pagesize(self->db, pagesize); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_set_re_delim(DBObject* self, PyObject* args) +{ + int err; + char delim; + + if (!PyArg_ParseTuple(args,"b:set_re_delim", &delim)) { + PyErr_Clear(); + if (!PyArg_ParseTuple(args,"c:set_re_delim", &delim)) + return NULL; + } + + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_re_delim(self->db, delim); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + +static PyObject* +DB_set_re_len(DBObject* self, PyObject* args) +{ + int err, len; + + if (!PyArg_ParseTuple(args,"i:set_re_len", &len)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_re_len(self->db, len); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_set_re_pad(DBObject* self, PyObject* args) +{ + int err; + char pad; + + if (!PyArg_ParseTuple(args,"b:set_re_pad", &pad)) { + PyErr_Clear(); + if (!PyArg_ParseTuple(args,"c:set_re_pad", &pad)) + return NULL; + } + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_re_pad(self->db, pad); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_set_re_source(DBObject* self, PyObject* args) +{ + int err; + char *re_source; + + if (!PyArg_ParseTuple(args,"s:set_re_source", &re_source)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_re_source(self->db, re_source); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +#if (DBVER >= 32) +static PyObject* +DB_set_q_extentsize(DBObject* self, PyObject* args) +{ + int err; + int extentsize; + + if (!PyArg_ParseTuple(args,"i:set_q_extentsize", &extentsize)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->set_q_extentsize(self->db, extentsize); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} +#endif + +static PyObject* +DB_stat(DBObject* self, PyObject* args) +{ + int err, flags = 0, type; + void* sp; + PyObject* d; + + + if (!PyArg_ParseTuple(args, "|i:stat", &flags)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 33) + err = self->db->stat(self->db, &sp, flags); +#else + err = self->db->stat(self->db, &sp, NULL, flags); +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + self->haveStat = 1; + + /* Turn the stat structure into a dictionary */ + type = _DB_get_type(self); + if ((type == -1) || ((d = PyDict_New()) == NULL)) { + free(sp); + return NULL; + } + +#define MAKE_HASH_ENTRY(name) _addIntToDict(d, #name, ((DB_HASH_STAT*)sp)->hash_##name) +#define MAKE_BT_ENTRY(name) _addIntToDict(d, #name, ((DB_BTREE_STAT*)sp)->bt_##name) +#define MAKE_QUEUE_ENTRY(name) _addIntToDict(d, #name, ((DB_QUEUE_STAT*)sp)->qs_##name) + + switch (type) { + case DB_HASH: + MAKE_HASH_ENTRY(magic); + MAKE_HASH_ENTRY(version); + MAKE_HASH_ENTRY(nkeys); + MAKE_HASH_ENTRY(ndata); + MAKE_HASH_ENTRY(pagesize); + MAKE_HASH_ENTRY(nelem); + MAKE_HASH_ENTRY(ffactor); + MAKE_HASH_ENTRY(buckets); + MAKE_HASH_ENTRY(free); + MAKE_HASH_ENTRY(bfree); + MAKE_HASH_ENTRY(bigpages); + MAKE_HASH_ENTRY(big_bfree); + MAKE_HASH_ENTRY(overflows); + MAKE_HASH_ENTRY(ovfl_free); + MAKE_HASH_ENTRY(dup); + MAKE_HASH_ENTRY(dup_free); + break; + + case DB_BTREE: + case DB_RECNO: + MAKE_BT_ENTRY(magic); + MAKE_BT_ENTRY(version); + MAKE_BT_ENTRY(nkeys); + MAKE_BT_ENTRY(ndata); + MAKE_BT_ENTRY(pagesize); + MAKE_BT_ENTRY(minkey); + MAKE_BT_ENTRY(re_len); + MAKE_BT_ENTRY(re_pad); + MAKE_BT_ENTRY(levels); + MAKE_BT_ENTRY(int_pg); + MAKE_BT_ENTRY(leaf_pg); + MAKE_BT_ENTRY(dup_pg); + MAKE_BT_ENTRY(over_pg); + MAKE_BT_ENTRY(free); + MAKE_BT_ENTRY(int_pgfree); + MAKE_BT_ENTRY(leaf_pgfree); + MAKE_BT_ENTRY(dup_pgfree); + MAKE_BT_ENTRY(over_pgfree); + break; + + case DB_QUEUE: + MAKE_QUEUE_ENTRY(magic); + MAKE_QUEUE_ENTRY(version); + MAKE_QUEUE_ENTRY(nkeys); + MAKE_QUEUE_ENTRY(ndata); + MAKE_QUEUE_ENTRY(pagesize); + MAKE_QUEUE_ENTRY(pages); + MAKE_QUEUE_ENTRY(re_len); + MAKE_QUEUE_ENTRY(re_pad); + MAKE_QUEUE_ENTRY(pgfree); +#if (DBVER == 31) + MAKE_QUEUE_ENTRY(start); +#endif + MAKE_QUEUE_ENTRY(first_recno); + MAKE_QUEUE_ENTRY(cur_recno); + break; + + default: + PyErr_SetString(PyExc_TypeError, "Unknown DB type, unable to stat"); + Py_DECREF(d); + d = NULL; + } + +#undef MAKE_HASH_ENTRY +#undef MAKE_BT_ENTRY +#undef MAKE_QUEUE_ENTRY + + free(sp); + return d; +} + +static PyObject* +DB_sync(DBObject* self, PyObject* args) +{ + int err; + int flags = 0; + + if (!PyArg_ParseTuple(args,"|i:sync", &flags )) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->sync(self->db, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +#if (DBVER >= 33) +static PyObject* +DB_truncate(DBObject* self, PyObject* args, PyObject* kwargs) +{ + int err, flags=0; + u_int32_t count=0; + PyObject* txnobj = NULL; + DB_TXN *txn = NULL; + char* kwnames[] = { "txn", "flags", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|Oi:cursor", kwnames, + &txnobj, &flags)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + if (!checkTxnObj(txnobj, &txn)) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->truncate(self->db, txn, &count, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + return PyInt_FromLong(count); +} +#endif + + +static PyObject* +DB_upgrade(DBObject* self, PyObject* args) +{ + int err, flags=0; + char *filename; + + if (!PyArg_ParseTuple(args,"s|i:upgrade", &filename, &flags)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->upgrade(self->db, filename, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_verify(DBObject* self, PyObject* args, PyObject* kwargs) +{ + int err, flags=0; + char* fileName; + char* dbName=NULL; + char* outFileName=NULL; + FILE* outFile=NULL; + char* kwnames[] = { "filename", "dbname", "outfile", "flags", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "s|zzi:verify", kwnames, + &fileName, &dbName, &outFileName, &flags)) + return NULL; + + CHECK_DB_NOT_CLOSED(self); + if (outFileName) + outFile = fopen(outFileName, "w"); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->verify(self->db, fileName, dbName, outFile, flags); + MYDB_END_ALLOW_THREADS; + if (outFileName) + fclose(outFile); + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DB_set_get_returns_none(DBObject* self, PyObject* args) +{ + int flags=0; + int oldValue; + + if (!PyArg_ParseTuple(args,"i:set_get_returns_none", &flags)) + return NULL; + CHECK_DB_NOT_CLOSED(self); + + oldValue = self->getReturnsNone; + self->getReturnsNone = flags; + return PyInt_FromLong(oldValue); +} + + +/*-------------------------------------------------------------- */ +/* Mapping and Dictionary-like access routines */ + +int DB_length(DBObject* self) +{ + int err; + long size = 0; + int flags = 0; + void* sp; + + if (self->db == NULL) { + PyErr_SetObject(DBError, Py_BuildValue("(is)", 0, "DB object has been closed")); + return -1; + } + + if (self->haveStat) { /* Has the stat function been called recently? If + so, we can use the cached value. */ + flags = DB_CACHED_COUNTS; + } + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 33) + err = self->db->stat(self->db, &sp, flags); +#else + err = self->db->stat(self->db, &sp, NULL, flags); +#endif + MYDB_END_ALLOW_THREADS; + + if (err) + return -1; + + self->haveStat = 1; + + /* All the stat structures have matching fields upto the ndata field, + so we can use any of them for the type cast */ + size = ((DB_BTREE_STAT*)sp)->bt_ndata; + free(sp); + return size; +} + + +PyObject* DB_subscript(DBObject* self, PyObject* keyobj) +{ + int err; + PyObject* retval; + DBT key; + DBT data; + + CHECK_DB_NOT_CLOSED(self); + if (!make_key_dbt(self, keyobj, &key, NULL)) + return NULL; + + CLEAR_DBT(data); + if (CHECK_DBFLAG(self, DB_THREAD)) { + /* Tell BerkeleyDB to malloc the return value (thread safe) */ + data.flags = DB_DBT_MALLOC; + } + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->get(self->db, NULL, &key, &data, 0); + MYDB_END_ALLOW_THREADS; + if (err == DB_NOTFOUND || err == DB_KEYEMPTY) { + PyErr_SetObject(PyExc_KeyError, keyobj); + retval = NULL; + } + else if (makeDBError(err)) { + retval = NULL; + } + else { + retval = PyString_FromStringAndSize((char*)data.data, data.size); + FREE_DBT(data); + } + + FREE_DBT(key); + return retval; +} + + +static int +DB_ass_sub(DBObject* self, PyObject* keyobj, PyObject* dataobj) +{ + DBT key, data; + int retval; + int flags = 0; + + if (self->db == NULL) { + PyErr_SetObject(DBError, Py_BuildValue("(is)", 0, "DB object has been closed")); + return -1; + } + + if (!make_key_dbt(self, keyobj, &key, NULL)) + return -1; + + if (dataobj != NULL) { + if (!make_dbt(dataobj, &data)) + retval = -1; + else { + if (self->setflags & (DB_DUP|DB_DUPSORT)) + flags = DB_NOOVERWRITE; /* dictionaries shouldn't have duplicate keys */ + retval = _DB_put(self, NULL, &key, &data, flags); + + if ((retval == -1) && (self->setflags & (DB_DUP|DB_DUPSORT))) { + /* try deleting any old record that matches and then PUT it again... */ + _DB_delete(self, NULL, &key, 0); + PyErr_Clear(); + retval = _DB_put(self, NULL, &key, &data, flags); + } + } + } + else { + /* dataobj == NULL, so delete the key */ + retval = _DB_delete(self, NULL, &key, 0); + } + FREE_DBT(key); + return retval; +} + + +static PyObject* +DB_has_key(DBObject* self, PyObject* args) +{ + int err; + PyObject* keyobj; + DBT key, data; + PyObject* txnobj = NULL; + DB_TXN *txn = NULL; + + if (!PyArg_ParseTuple(args,"O|O:has_key", &keyobj, &txnobj )) + return NULL; + CHECK_DB_NOT_CLOSED(self); + if (!make_key_dbt(self, keyobj, &key, NULL)) + return NULL; + if (!checkTxnObj(txnobj, &txn)) + return NULL; + + /* This causes ENOMEM to be returned when the db has the key because + it has a record but can't allocate a buffer for the data. This saves + having to deal with data we won't be using. + */ + CLEAR_DBT(data); + data.flags = DB_DBT_USERMEM; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->get(self->db, NULL, &key, &data, 0); + MYDB_END_ALLOW_THREADS; + FREE_DBT(key); + return PyInt_FromLong((err == ENOMEM) || (err == 0)); +} + + +#define _KEYS_LIST 1 +#define _VALUES_LIST 2 +#define _ITEMS_LIST 3 + +static PyObject* +_DB_make_list(DBObject* self, DB_TXN* txn, int type) +{ + int err, dbtype; + DBT key; + DBT data; + DBC *cursor; + PyObject* list; + PyObject* item = NULL; + + CHECK_DB_NOT_CLOSED(self); + CLEAR_DBT(key); + CLEAR_DBT(data); + + dbtype = _DB_get_type(self); + if (dbtype == -1) + return NULL; + + list = PyList_New(0); + if (list == NULL) { + PyErr_SetString(PyExc_MemoryError, "PyList_New failed"); + return NULL; + } + + /* get a cursor */ + MYDB_BEGIN_ALLOW_THREADS; + err = self->db->cursor(self->db, NULL, &cursor, 0); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + if (CHECK_DBFLAG(self, DB_THREAD)) { + key.flags = DB_DBT_REALLOC; + data.flags = DB_DBT_REALLOC; + } + + while (1) { /* use the cursor to traverse the DB, collecting items */ + MYDB_BEGIN_ALLOW_THREADS; + err = cursor->c_get(cursor, &key, &data, DB_NEXT); + MYDB_END_ALLOW_THREADS; + + if (err) { + /* for any error, break out of the loop */ + break; + } + + switch (type) { + case _KEYS_LIST: + switch(dbtype) { + case DB_BTREE: + case DB_HASH: + default: + item = PyString_FromStringAndSize((char*)key.data, key.size); + break; + case DB_RECNO: + case DB_QUEUE: + item = PyInt_FromLong(*((db_recno_t*)key.data)); + break; + } + break; + + case _VALUES_LIST: + item = PyString_FromStringAndSize((char*)data.data, data.size); + break; + + case _ITEMS_LIST: + switch(dbtype) { + case DB_BTREE: + case DB_HASH: + default: + item = Py_BuildValue("s#s#", key.data, key.size, data.data, data.size); + break; + case DB_RECNO: + case DB_QUEUE: + item = Py_BuildValue("is#", *((db_recno_t*)key.data), data.data, data.size); + break; + } + break; + } + if (item == NULL) { + Py_DECREF(list); + PyErr_SetString(PyExc_MemoryError, "List item creation failed"); + list = NULL; + goto done; + } + PyList_Append(list, item); + Py_DECREF(item); + } + + /* DB_NOTFOUND is okay, it just means we got to the end */ + if (err != DB_NOTFOUND && makeDBError(err)) { + Py_DECREF(list); + list = NULL; + } + + done: + FREE_DBT(key); + FREE_DBT(data); + MYDB_BEGIN_ALLOW_THREADS; + cursor->c_close(cursor); + MYDB_END_ALLOW_THREADS; + return list; +} + + +static PyObject* +DB_keys(DBObject* self, PyObject* args) +{ + PyObject* txnobj = NULL; + DB_TXN *txn = NULL; + + if (!PyArg_ParseTuple(args,"|O:keys", &txnobj)) + return NULL; + if (!checkTxnObj(txnobj, &txn)) + return NULL; + return _DB_make_list(self, txn, _KEYS_LIST); +} + + +static PyObject* +DB_items(DBObject* self, PyObject* args) +{ + PyObject* txnobj = NULL; + DB_TXN *txn = NULL; + + if (!PyArg_ParseTuple(args,"|O:items", &txnobj)) + return NULL; + if (!checkTxnObj(txnobj, &txn)) + return NULL; + return _DB_make_list(self, txn, _ITEMS_LIST); +} + + +static PyObject* +DB_values(DBObject* self, PyObject* args) +{ + PyObject* txnobj = NULL; + DB_TXN *txn = NULL; + + if (!PyArg_ParseTuple(args,"|O:values", &txnobj)) + return NULL; + if (!checkTxnObj(txnobj, &txn)) + return NULL; + return _DB_make_list(self, txn, _VALUES_LIST); +} + + +/* --------------------------------------------------------------------- */ +/* DBCursor methods */ + + +static PyObject* +DBC_close(DBCursorObject* self, PyObject* args) +{ + int err = 0; + + if (!PyArg_ParseTuple(args, ":close")) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + if (self->dbc != NULL) { + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_close(self->dbc); + self->dbc = NULL; + MYDB_END_ALLOW_THREADS; + } + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBC_count(DBCursorObject* self, PyObject* args) +{ + int err = 0; + db_recno_t count; + int flags = 0; + + if (!PyArg_ParseTuple(args, "|i:count", &flags)) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_count(self->dbc, &count, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + return PyInt_FromLong(count); +} + + +static PyObject* +DBC_current(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + return _DBCursor_get(self,DB_CURRENT,args,kwargs,"|iii:current"); +} + + +static PyObject* +DBC_delete(DBCursorObject* self, PyObject* args) +{ + int err, flags=0; + + if (!PyArg_ParseTuple(args, "|i:delete", &flags)) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_del(self->dbc, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + self->mydb->haveStat = 0; + RETURN_NONE(); +} + + +static PyObject* +DBC_dup(DBCursorObject* self, PyObject* args) +{ + int err, flags =0; + DBC* dbc = NULL; + + if (!PyArg_ParseTuple(args, "|i:dup", &flags)) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_dup(self->dbc, &dbc, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + return (PyObject*) newDBCursorObject(dbc, self->mydb); +} + +static PyObject* +DBC_first(DBCursorObject* self, PyObject* args, PyObject* kwargs) +{ + return _DBCursor_get(self,DB_FIRST,args,kwargs,"|iii:first"); +} + + +static PyObject* +DBC_get(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + int err, flags; + PyObject* keyobj = NULL; + PyObject* dataobj = NULL; + PyObject* retval = NULL; + int dlen = -1; + int doff = -1; + DBT key, data; + char* kwnames[] = { "key","data", "flags", "dlen", "doff", NULL }; + + CLEAR_DBT(key); + CLEAR_DBT(data); + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "i|ii:get", &kwnames[2], + &flags, &dlen, &doff)) { + PyErr_Clear(); + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "Oi|ii:get", &kwnames[1], + &keyobj, &flags, &dlen, &doff)) { + PyErr_Clear(); + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "OOi|ii:get", kwnames, + &keyobj, &dataobj, &flags, &dlen, &doff)) { + return NULL; + } + } + } + + CHECK_CURSOR_NOT_CLOSED(self); + + if (keyobj && !make_key_dbt(self->mydb, keyobj, &key, NULL)) + return NULL; + if (dataobj && !make_dbt(dataobj, &data)) + return NULL; + if (!add_partial_dbt(&data, dlen, doff)) + return NULL; + + if (CHECK_DBFLAG(self->mydb, DB_THREAD)) { + data.flags = DB_DBT_MALLOC; + key.flags = DB_DBT_MALLOC; + } + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_get(self->dbc, &key, &data, flags); + MYDB_END_ALLOW_THREADS; + + + if ((err == DB_NOTFOUND) && self->mydb->getReturnsNone) { + Py_INCREF(Py_None); + retval = Py_None; + } + else if (makeDBError(err)) { + retval = NULL; + } + else { + switch (_DB_get_type(self->mydb)) { + case -1: + retval = NULL; + break; + case DB_BTREE: + case DB_HASH: + default: + retval = Py_BuildValue("s#s#", key.data, key.size, + data.data, data.size); + break; + case DB_RECNO: + case DB_QUEUE: + retval = Py_BuildValue("is#", *((db_recno_t*)key.data), + data.data, data.size); + break; + } + FREE_DBT(key); + FREE_DBT(data); + } + return retval; +} + + +static PyObject* +DBC_get_recno(DBCursorObject* self, PyObject* args) +{ + int err; + db_recno_t recno; + DBT key; + DBT data; + + if (!PyArg_ParseTuple(args, ":get_recno")) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + CLEAR_DBT(key); + CLEAR_DBT(data); + if (CHECK_DBFLAG(self->mydb, DB_THREAD)) { + /* Tell BerkeleyDB to malloc the return value (thread safe) */ + data.flags = DB_DBT_MALLOC; + key.flags = DB_DBT_MALLOC; + } + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_get(self->dbc, &key, &data, DB_GET_RECNO); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + recno = *((db_recno_t*)data.data); + FREE_DBT(key); + FREE_DBT(data); + return PyInt_FromLong(recno); +} + + +static PyObject* +DBC_last(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + return _DBCursor_get(self,DB_LAST,args,kwargs,"|iii:last"); +} + + +static PyObject* +DBC_next(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + return _DBCursor_get(self,DB_NEXT,args,kwargs,"|iii:next"); +} + + +static PyObject* +DBC_prev(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + return _DBCursor_get(self,DB_PREV,args,kwargs,"|iii:prev"); +} + + +static PyObject* +DBC_put(DBCursorObject* self, PyObject* args, PyObject* kwargs) +{ + int err, flags = 0; + PyObject* keyobj, *dataobj; + DBT key, data; + char* kwnames[] = { "key", "data", "flags", "dlen", "doff", NULL }; + int dlen = -1; + int doff = -1; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "OO|iii:put", kwnames, + &keyobj, &dataobj, &flags, &dlen, &doff)) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + if (!make_key_dbt(self->mydb, keyobj, &key, NULL)) + return NULL; + if (!make_dbt(dataobj, &data)) + return NULL; + if (!add_partial_dbt(&data, dlen, doff)) return NULL; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_put(self->dbc, &key, &data, flags); + MYDB_END_ALLOW_THREADS; + FREE_DBT(key); + RETURN_IF_ERR(); + self->mydb->haveStat = 0; + RETURN_NONE(); +} + + +static PyObject* +DBC_set(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + int err, flags = 0; + DBT key, data; + PyObject* retval, *keyobj; + char* kwnames[] = { "key", "flags", "dlen", "doff", NULL }; + int dlen = -1; + int doff = -1; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "O|iii:set", kwnames, + &keyobj, &flags, &dlen, &doff)) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + if (!make_key_dbt(self->mydb, keyobj, &key, NULL)) + return NULL; + + CLEAR_DBT(data); + if (CHECK_DBFLAG(self->mydb, DB_THREAD)) { + /* Tell BerkeleyDB to malloc the return value (thread safe) */ + data.flags = DB_DBT_MALLOC; + } + if (!add_partial_dbt(&data, dlen, doff)) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_get(self->dbc, &key, &data, flags|DB_SET); + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + retval = NULL; + } + else { + switch (_DB_get_type(self->mydb)) { + case -1: + retval = NULL; + break; + case DB_BTREE: + case DB_HASH: + default: + retval = Py_BuildValue("s#s#", key.data, key.size, + data.data, data.size); + break; + case DB_RECNO: + case DB_QUEUE: + retval = Py_BuildValue("is#", *((db_recno_t*)key.data), + data.data, data.size); + break; + } + FREE_DBT(key); + FREE_DBT(data); + } + + return retval; +} + + +static PyObject* +DBC_set_range(DBCursorObject* self, PyObject* args, PyObject* kwargs) +{ + int err, flags = 0; + DBT key, data; + PyObject* retval, *keyobj; + char* kwnames[] = { "key", "flags", "dlen", "doff", NULL }; + int dlen = -1; + int doff = -1; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "O|iii:set_range", kwnames, + &keyobj, &flags, &dlen, &doff)) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + if (!make_key_dbt(self->mydb, keyobj, &key, NULL)) + return NULL; + + CLEAR_DBT(data); + if (CHECK_DBFLAG(self->mydb, DB_THREAD)) { + /* Tell BerkeleyDB to malloc the return value (thread safe) */ + data.flags = DB_DBT_MALLOC; + key.flags = DB_DBT_MALLOC; + } + if (!add_partial_dbt(&data, dlen, doff)) + return NULL; + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_get(self->dbc, &key, &data, flags|DB_SET_RANGE); + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + retval = NULL; + } + else { + switch (_DB_get_type(self->mydb)) { + case -1: + retval = NULL; + break; + case DB_BTREE: + case DB_HASH: + default: + retval = Py_BuildValue("s#s#", key.data, key.size, + data.data, data.size); + break; + case DB_RECNO: + case DB_QUEUE: + retval = Py_BuildValue("is#", *((db_recno_t*)key.data), + data.data, data.size); + break; + } + FREE_DBT(key); + FREE_DBT(data); + } + + return retval; +} + + +static PyObject* +DBC_get_both(DBCursorObject* self, PyObject* args) +{ + int err, flags=0; + DBT key, data; + PyObject* retval, *keyobj, *dataobj; + + if (!PyArg_ParseTuple(args, "OO|i:get_both", &keyobj, &dataobj, &flags)) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + if (!make_key_dbt(self->mydb, keyobj, &key, NULL)) + return NULL; + if (!make_dbt(dataobj, &data)) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_get(self->dbc, &key, &data, flags|DB_GET_BOTH); + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + retval = NULL; + } + else { + switch (_DB_get_type(self->mydb)) { + case -1: + retval = NULL; + break; + case DB_BTREE: + case DB_HASH: + default: + retval = Py_BuildValue("s#s#", key.data, key.size, + data.data, data.size); + break; + case DB_RECNO: + case DB_QUEUE: + retval = Py_BuildValue("is#", *((db_recno_t*)key.data), + data.data, data.size); + break; + } + } + + FREE_DBT(key); + return retval; +} + + +static PyObject* +DBC_set_recno(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + int err, irecno, flags=0; + db_recno_t recno; + DBT key, data; + PyObject* retval; + int dlen = -1; + int doff = -1; + char* kwnames[] = { "recno","flags", "dlen", "doff", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "i|iii:set_recno", kwnames, + &irecno, &flags, &dlen, &doff)) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + CLEAR_DBT(key); + recno = (db_recno_t) irecno; + /* use allocated space so DB will be able to realloc room for the real key */ + key.data = malloc(sizeof(db_recno_t)); + if (key.data == NULL) { + PyErr_SetString(PyExc_MemoryError, "Key memory allocation failed"); + return NULL; + } + key.size = sizeof(db_recno_t); + key.ulen = key.size; + memcpy(key.data, &recno, sizeof(db_recno_t)); + key.flags = DB_DBT_REALLOC; + + CLEAR_DBT(data); + if (CHECK_DBFLAG(self->mydb, DB_THREAD)) { + /* Tell BerkeleyDB to malloc the return value (thread safe) */ + data.flags = DB_DBT_MALLOC; + } + if (!add_partial_dbt(&data, dlen, doff)) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_get(self->dbc, &key, &data, flags|DB_SET_RECNO); + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + retval = NULL; + } + else { /* Can only be used for BTrees, so no need to return int key */ + retval = Py_BuildValue("s#s#", key.data, key.size, + data.data, data.size); + FREE_DBT(key); + FREE_DBT(data); + } + + return retval; +} + + +static PyObject* +DBC_consume(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + return _DBCursor_get(self,DB_CONSUME,args,kwargs,"|iii:consume"); +} + + +static PyObject* +DBC_next_dup(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + return _DBCursor_get(self,DB_NEXT_DUP,args,kwargs,"|iii:next_dup"); +} + + +static PyObject* +DBC_next_nodup(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + return _DBCursor_get(self,DB_NEXT_NODUP,args,kwargs,"|iii:next_nodup"); +} + + +static PyObject* +DBC_prev_nodup(DBCursorObject* self, PyObject* args, PyObject *kwargs) +{ + return _DBCursor_get(self,DB_PREV_NODUP,args,kwargs,"|iii:prev_nodup"); +} + + +static PyObject* +DBC_join_item(DBCursorObject* self, PyObject* args) +{ + int err; + DBT key, data; + PyObject* retval; + + if (!PyArg_ParseTuple(args, ":join_item")) + return NULL; + + CHECK_CURSOR_NOT_CLOSED(self); + + CLEAR_DBT(key); + CLEAR_DBT(data); + if (CHECK_DBFLAG(self->mydb, DB_THREAD)) { + /* Tell BerkeleyDB to malloc the return value (thread safe) */ + key.flags = DB_DBT_MALLOC; + } + + MYDB_BEGIN_ALLOW_THREADS; + err = self->dbc->c_get(self->dbc, &key, &data, DB_JOIN_ITEM); + MYDB_END_ALLOW_THREADS; + if (makeDBError(err)) { + retval = NULL; + } + else { + retval = Py_BuildValue("s#s#", key.data, key.size); + FREE_DBT(key); + } + + return retval; +} + + + +/* --------------------------------------------------------------------- */ +/* DBEnv methods */ + + +static PyObject* +DBEnv_close(DBEnvObject* self, PyObject* args) +{ + int err, flags = 0; + + if (!PyArg_ParseTuple(args, "|i:close", &flags)) + return NULL; + if (!self->closed) { /* Don't close more than once */ + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->close(self->db_env, flags); + MYDB_END_ALLOW_THREADS; + /* after calling DBEnv->close, regardless of error, this DBEnv + * may not be accessed again (BerkeleyDB docs). */ + self->closed = 1; + self->db_env = NULL; + RETURN_IF_ERR(); + } + RETURN_NONE(); +} + + +static PyObject* +DBEnv_open(DBEnvObject* self, PyObject* args) +{ + int err, flags=0, mode=0660; + char *db_home; + + if (!PyArg_ParseTuple(args, "z|ii:open", &db_home, &flags, &mode)) + return NULL; + + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->open(self->db_env, db_home, flags, mode); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + self->closed = 0; + self->flags = flags; + RETURN_NONE(); +} + + +static PyObject* +DBEnv_remove(DBEnvObject* self, PyObject* args) +{ + int err, flags=0; + char *db_home; + + if (!PyArg_ParseTuple(args, "s|i:remove", &db_home, &flags)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->remove(self->db_env, db_home, flags); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_set_cachesize(DBEnvObject* self, PyObject* args) +{ + int err, gbytes=0, bytes=0, ncache=0; + + if (!PyArg_ParseTuple(args, "ii|i:set_cachesize", + &gbytes, &bytes, &ncache)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_cachesize(self->db_env, gbytes, bytes, ncache); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +#if (DBVER >= 32) +static PyObject* +DBEnv_set_flags(DBEnvObject* self, PyObject* args) +{ + int err, flags=0, onoff=0; + + if (!PyArg_ParseTuple(args, "ii:set_flags", + &flags, &onoff)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_flags(self->db_env, flags, onoff); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} +#endif + + +static PyObject* +DBEnv_set_data_dir(DBEnvObject* self, PyObject* args) +{ + int err; + char *dir; + + if (!PyArg_ParseTuple(args, "s:set_data_dir", &dir)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_data_dir(self->db_env, dir); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_set_lg_bsize(DBEnvObject* self, PyObject* args) +{ + int err, lg_bsize; + + if (!PyArg_ParseTuple(args, "i:set_lg_bsize", &lg_bsize)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_lg_bsize(self->db_env, lg_bsize); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_set_lg_dir(DBEnvObject* self, PyObject* args) +{ + int err; + char *dir; + + if (!PyArg_ParseTuple(args, "s:set_lg_dir", &dir)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_lg_dir(self->db_env, dir); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + +static PyObject* +DBEnv_set_lg_max(DBEnvObject* self, PyObject* args) +{ + int err, lg_max; + + if (!PyArg_ParseTuple(args, "i:set_lg_max", &lg_max)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_lg_max(self->db_env, lg_max); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_set_lk_detect(DBEnvObject* self, PyObject* args) +{ + int err, lk_detect; + + if (!PyArg_ParseTuple(args, "i:set_lk_detect", &lk_detect)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_lk_detect(self->db_env, lk_detect); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_set_lk_max(DBEnvObject* self, PyObject* args) +{ + int err, max; + + if (!PyArg_ParseTuple(args, "i:set_lk_max", &max)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_lk_max(self->db_env, max); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +#if (DBVER >= 32) + +static PyObject* +DBEnv_set_lk_max_locks(DBEnvObject* self, PyObject* args) +{ + int err, max; + + if (!PyArg_ParseTuple(args, "i:set_lk_max_locks", &max)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_lk_max_locks(self->db_env, max); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_set_lk_max_lockers(DBEnvObject* self, PyObject* args) +{ + int err, max; + + if (!PyArg_ParseTuple(args, "i:set_lk_max_lockers", &max)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_lk_max_lockers(self->db_env, max); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_set_lk_max_objects(DBEnvObject* self, PyObject* args) +{ + int err, max; + + if (!PyArg_ParseTuple(args, "i:set_lk_max_objects", &max)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_lk_max_objects(self->db_env, max); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + +#endif + + +static PyObject* +DBEnv_set_mp_mmapsize(DBEnvObject* self, PyObject* args) +{ + int err, mp_mmapsize; + + if (!PyArg_ParseTuple(args, "i:set_mp_mmapsize", &mp_mmapsize)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_mp_mmapsize(self->db_env, mp_mmapsize); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_set_tmp_dir(DBEnvObject* self, PyObject* args) +{ + int err; + char *dir; + + if (!PyArg_ParseTuple(args, "s:set_tmp_dir", &dir)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_tmp_dir(self->db_env, dir); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_txn_begin(DBEnvObject* self, PyObject* args, PyObject* kwargs) +{ + int flags = 0; + PyObject* txnobj = NULL; + DB_TXN *txn = NULL; + char* kwnames[] = { "parent", "flags", NULL }; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|Oi:txn_begin", kwnames, + &txnobj, &flags)) + return NULL; + + if (!checkTxnObj(txnobj, &txn)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + return (PyObject*)newDBTxnObject(self, txn, flags); +} + + +static PyObject* +DBEnv_txn_checkpoint(DBEnvObject* self, PyObject* args) +{ + int err, kbyte=0, min=0, flags=0; + + if (!PyArg_ParseTuple(args, "|iii:txn_checkpoint", &kbyte, &min, &flags)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = self->db_env->txn_checkpoint(self->db_env, kbyte, min, flags); +#else + err = txn_checkpoint(self->db_env, kbyte, min, flags); +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_set_tx_max(DBEnvObject* self, PyObject* args) +{ + int err, max; + + if (!PyArg_ParseTuple(args, "i:set_tx_max", &max)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; + err = self->db_env->set_tx_max(self->db_env, max); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_lock_detect(DBEnvObject* self, PyObject* args) +{ + int err, atype, flags=0; + int aborted = 0; + + if (!PyArg_ParseTuple(args, "i|i:lock_detect", &atype, &flags)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = self->db_env->lock_detect(self->db_env, flags, atype, &aborted); +#else + err = lock_detect(self->db_env, flags, atype, &aborted); +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + return PyInt_FromLong(aborted); +} + + +static PyObject* +DBEnv_lock_get(DBEnvObject* self, PyObject* args) +{ + int flags=0; + int locker, lock_mode; + DBT obj; + PyObject* objobj; + + if (!PyArg_ParseTuple(args, "iOi|i:lock_get", &locker, &objobj, &lock_mode, &flags)) + return NULL; + + + if (!make_dbt(objobj, &obj)) + return NULL; + + return (PyObject*)newDBLockObject(self, locker, &obj, lock_mode, flags); +} + + +static PyObject* +DBEnv_lock_id(DBEnvObject* self, PyObject* args) +{ + int err; + u_int32_t theID; + + if (!PyArg_ParseTuple(args, ":lock_id")) + return NULL; + + CHECK_ENV_NOT_CLOSED(self); + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = self->db_env->lock_id(self->db_env, &theID); +#else + err = lock_id(self->db_env, &theID); +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + return PyInt_FromLong((long)theID); +} + + +static PyObject* +DBEnv_lock_put(DBEnvObject* self, PyObject* args) +{ + int err; + DBLockObject* dblockobj; + + if (!PyArg_ParseTuple(args, "O!:lock_put", &DBLock_Type, &dblockobj)) + return NULL; + + CHECK_ENV_NOT_CLOSED(self); + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = self->db_env->lock_put(self->db_env, &dblockobj->lock); +#else + err = lock_put(self->db_env, &dblockobj->lock); +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBEnv_lock_stat(DBEnvObject* self, PyObject* args) +{ + int err; + DB_LOCK_STAT* sp; + PyObject* d = NULL; + u_int32_t flags; + + if (!PyArg_ParseTuple(args, "|i:lock_stat", &flags)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = self->db_env->lock_stat(self->db_env, &sp, flags); +#else +#if (DBVER >= 33) + err = lock_stat(self->db_env, &sp); +#else + err = lock_stat(self->db_env, &sp, NULL); +#endif +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + /* Turn the stat structure into a dictionary */ + d = PyDict_New(); + if (d == NULL) { + free(sp); + return NULL; + } + +#define MAKE_ENTRY(name) _addIntToDict(d, #name, sp->st_##name) + + MAKE_ENTRY(lastid); + MAKE_ENTRY(nmodes); +#if (DBVER >= 32) + MAKE_ENTRY(maxlocks); + MAKE_ENTRY(maxlockers); + MAKE_ENTRY(maxobjects); + MAKE_ENTRY(nlocks); + MAKE_ENTRY(maxnlocks); +#endif + MAKE_ENTRY(nlockers); + MAKE_ENTRY(maxnlockers); +#if (DBVER >= 32) + MAKE_ENTRY(nobjects); + MAKE_ENTRY(maxnobjects); +#endif + MAKE_ENTRY(nrequests); + MAKE_ENTRY(nreleases); + MAKE_ENTRY(nnowaits); + MAKE_ENTRY(nconflicts); + MAKE_ENTRY(ndeadlocks); + MAKE_ENTRY(regsize); + MAKE_ENTRY(region_wait); + MAKE_ENTRY(region_nowait); + +#undef MAKE_ENTRY + free(sp); + return d; +} + + +static PyObject* +DBEnv_log_archive(DBEnvObject* self, PyObject* args) +{ + int flags=0; + int err; + char **log_list_start, **log_list; + PyObject* list; + PyObject* item = NULL; + + if (!PyArg_ParseTuple(args, "|i:log_archive", &flags)) + return NULL; + + CHECK_ENV_NOT_CLOSED(self); + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = self->db_env->log_archive(self->db_env, &log_list, flags); +#elif (DBVER == 33) + err = log_archive(self->db_env, &log_list, flags); +#else + err = log_archive(self->db_env, &log_list, flags, NULL); +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + list = PyList_New(0); + if (list == NULL) { + PyErr_SetString(PyExc_MemoryError, "PyList_New failed"); + return NULL; + } + + if (log_list) { + for (log_list_start = log_list; *log_list != NULL; ++log_list) { + item = PyString_FromString (*log_list); + if (item == NULL) { + Py_DECREF(list); + PyErr_SetString(PyExc_MemoryError, "List item creation failed"); + list = NULL; + break; + } + PyList_Append(list, item); + Py_DECREF(item); + } + free(log_list_start); + } + return list; +} + + +static PyObject* +DBEnv_txn_stat(DBEnvObject* self, PyObject* args) +{ + int err; + DB_TXN_STAT* sp; + PyObject* d = NULL; + u_int32_t flags; + + if (!PyArg_ParseTuple(args, "|i:txn_stat", &flags)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = self->db_env->txn_stat(self->db_env, &sp, flags); +#elif (DBVER == 33) + err = txn_stat(self->db_env, &sp); +#else + err = txn_stat(self->db_env, &sp, NULL); +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + + /* Turn the stat structure into a dictionary */ + d = PyDict_New(); + if (d == NULL) { + free(sp); + return NULL; + } + +#define MAKE_ENTRY(name) _addIntToDict(d, #name, sp->st_##name) + + MAKE_ENTRY(time_ckp); + MAKE_ENTRY(last_txnid); + MAKE_ENTRY(maxtxns); + MAKE_ENTRY(nactive); + MAKE_ENTRY(maxnactive); + MAKE_ENTRY(nbegins); + MAKE_ENTRY(naborts); + MAKE_ENTRY(ncommits); + MAKE_ENTRY(regsize); + MAKE_ENTRY(region_wait); + MAKE_ENTRY(region_nowait); + +#undef MAKE_ENTRY + free(sp); + return d; +} + + +static PyObject* +DBEnv_set_get_returns_none(DBEnvObject* self, PyObject* args) +{ + int flags=0; + int oldValue; + + if (!PyArg_ParseTuple(args,"i:set_get_returns_none", &flags)) + return NULL; + CHECK_ENV_NOT_CLOSED(self); + + oldValue = self->getReturnsNone; + self->getReturnsNone = flags; + return PyInt_FromLong(oldValue); +} + + +/* --------------------------------------------------------------------- */ +/* DBTxn methods */ + + +static PyObject* +DBTxn_commit(DBTxnObject* self, PyObject* args) +{ + int flags=0, err; + + if (!PyArg_ParseTuple(args, "|i:commit", &flags)) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = self->txn->commit(self->txn, flags); +#else + err = txn_commit(self->txn, flags); +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + +static PyObject* +DBTxn_prepare(DBTxnObject* self, PyObject* args) +{ +#if (DBVER >= 33) + int err; + char* gid=NULL; + int gid_size=0; + + if (!PyArg_ParseTuple(args, "s#:prepare", &gid, &gid_size)) + return NULL; + + if (gid_size != DB_XIDDATASIZE) { + PyErr_SetString(PyExc_TypeError, + "gid must be DB_XIDDATASIZE bytes long"); + return NULL; + } + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = self->txn->prepare(self->txn, (u_int8_t*)gid); +#else + err = txn_prepare(self->txn, (u_int8_t*)gid); +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +#else + int err; + + if (!PyArg_ParseTuple(args, ":prepare")) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; + err = txn_prepare(self->txn); + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +#endif +} + + +static PyObject* +DBTxn_abort(DBTxnObject* self, PyObject* args) +{ + int err; + + if (!PyArg_ParseTuple(args, ":abort")) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + err = self->txn->abort(self->txn); +#else + err = txn_abort(self->txn); +#endif + MYDB_END_ALLOW_THREADS; + RETURN_IF_ERR(); + RETURN_NONE(); +} + + +static PyObject* +DBTxn_id(DBTxnObject* self, PyObject* args) +{ + int id; + + if (!PyArg_ParseTuple(args, ":id")) + return NULL; + + MYDB_BEGIN_ALLOW_THREADS; +#if (DBVER >= 40) + id = self->txn->id(self->txn); +#else + id = txn_id(self->txn); +#endif + MYDB_END_ALLOW_THREADS; + return PyInt_FromLong(id); +} + +/* --------------------------------------------------------------------- */ +/* Method definition tables and type objects */ + +static PyMethodDef DB_methods[] = { + {"append", (PyCFunction)DB_append, METH_VARARGS}, +#if (DBVER >= 33) + {"associate", (PyCFunction)DB_associate, METH_VARARGS|METH_KEYWORDS}, +#endif + {"close", (PyCFunction)DB_close, METH_VARARGS}, +#if (DBVER >= 32) + {"consume", (PyCFunction)DB_consume, METH_VARARGS|METH_KEYWORDS}, + {"consume_wait", (PyCFunction)DB_consume_wait, METH_VARARGS|METH_KEYWORDS}, +#endif + {"cursor", (PyCFunction)DB_cursor, METH_VARARGS|METH_KEYWORDS}, + {"delete", (PyCFunction)DB_delete, METH_VARARGS|METH_KEYWORDS}, + {"fd", (PyCFunction)DB_fd, METH_VARARGS}, + {"get", (PyCFunction)DB_get, METH_VARARGS|METH_KEYWORDS}, + {"get_both", (PyCFunction)DB_get_both, METH_VARARGS|METH_KEYWORDS}, + {"get_byteswapped", (PyCFunction)DB_get_byteswapped,METH_VARARGS}, + {"get_size", (PyCFunction)DB_get_size, METH_VARARGS|METH_KEYWORDS}, + {"get_type", (PyCFunction)DB_get_type, METH_VARARGS}, + {"join", (PyCFunction)DB_join, METH_VARARGS}, + {"key_range", (PyCFunction)DB_key_range, METH_VARARGS|METH_KEYWORDS}, + {"has_key", (PyCFunction)DB_has_key, METH_VARARGS}, + {"items", (PyCFunction)DB_items, METH_VARARGS}, + {"keys", (PyCFunction)DB_keys, METH_VARARGS}, + {"open", (PyCFunction)DB_open, METH_VARARGS|METH_KEYWORDS}, + {"put", (PyCFunction)DB_put, METH_VARARGS|METH_KEYWORDS}, + {"remove", (PyCFunction)DB_remove, METH_VARARGS|METH_KEYWORDS}, + {"rename", (PyCFunction)DB_rename, METH_VARARGS}, + {"set_bt_minkey", (PyCFunction)DB_set_bt_minkey, METH_VARARGS}, + {"set_cachesize", (PyCFunction)DB_set_cachesize, METH_VARARGS}, + {"set_flags", (PyCFunction)DB_set_flags, METH_VARARGS}, + {"set_h_ffactor", (PyCFunction)DB_set_h_ffactor, METH_VARARGS}, + {"set_h_nelem", (PyCFunction)DB_set_h_nelem, METH_VARARGS}, + {"set_lorder", (PyCFunction)DB_set_lorder, METH_VARARGS}, + {"set_pagesize", (PyCFunction)DB_set_pagesize, METH_VARARGS}, + {"set_re_delim", (PyCFunction)DB_set_re_delim, METH_VARARGS}, + {"set_re_len", (PyCFunction)DB_set_re_len, METH_VARARGS}, + {"set_re_pad", (PyCFunction)DB_set_re_pad, METH_VARARGS}, + {"set_re_source", (PyCFunction)DB_set_re_source, METH_VARARGS}, +#if (DBVER >= 32) + {"set_q_extentsize",(PyCFunction)DB_set_q_extentsize,METH_VARARGS}, +#endif + {"stat", (PyCFunction)DB_stat, METH_VARARGS}, + {"sync", (PyCFunction)DB_sync, METH_VARARGS}, +#if (DBVER >= 33) + {"truncate", (PyCFunction)DB_truncate, METH_VARARGS|METH_KEYWORDS}, +#endif + {"type", (PyCFunction)DB_get_type, METH_VARARGS}, + {"upgrade", (PyCFunction)DB_upgrade, METH_VARARGS}, + {"values", (PyCFunction)DB_values, METH_VARARGS}, + {"verify", (PyCFunction)DB_verify, METH_VARARGS|METH_KEYWORDS}, + {"set_get_returns_none",(PyCFunction)DB_set_get_returns_none, METH_VARARGS}, + {NULL, NULL} /* sentinel */ +}; + + +static PyMappingMethods DB_mapping = { + (inquiry)DB_length, /*mp_length*/ + (binaryfunc)DB_subscript, /*mp_subscript*/ + (objobjargproc)DB_ass_sub, /*mp_ass_subscript*/ +}; + + +static PyMethodDef DBCursor_methods[] = { + {"close", (PyCFunction)DBC_close, METH_VARARGS}, + {"count", (PyCFunction)DBC_count, METH_VARARGS}, + {"current", (PyCFunction)DBC_current, METH_VARARGS|METH_KEYWORDS}, + {"delete", (PyCFunction)DBC_delete, METH_VARARGS}, + {"dup", (PyCFunction)DBC_dup, METH_VARARGS}, + {"first", (PyCFunction)DBC_first, METH_VARARGS|METH_KEYWORDS}, + {"get", (PyCFunction)DBC_get, METH_VARARGS|METH_KEYWORDS}, + {"get_recno", (PyCFunction)DBC_get_recno, METH_VARARGS}, + {"last", (PyCFunction)DBC_last, METH_VARARGS|METH_KEYWORDS}, + {"next", (PyCFunction)DBC_next, METH_VARARGS|METH_KEYWORDS}, + {"prev", (PyCFunction)DBC_prev, METH_VARARGS|METH_KEYWORDS}, + {"put", (PyCFunction)DBC_put, METH_VARARGS|METH_KEYWORDS}, + {"set", (PyCFunction)DBC_set, METH_VARARGS|METH_KEYWORDS}, + {"set_range", (PyCFunction)DBC_set_range, METH_VARARGS|METH_KEYWORDS}, + {"get_both", (PyCFunction)DBC_get_both, METH_VARARGS}, + {"set_both", (PyCFunction)DBC_get_both, METH_VARARGS}, + {"set_recno", (PyCFunction)DBC_set_recno, METH_VARARGS|METH_KEYWORDS}, + {"consume", (PyCFunction)DBC_consume, METH_VARARGS|METH_KEYWORDS}, + {"next_dup", (PyCFunction)DBC_next_dup, METH_VARARGS|METH_KEYWORDS}, + {"next_nodup", (PyCFunction)DBC_next_nodup, METH_VARARGS|METH_KEYWORDS}, + {"prev_nodup", (PyCFunction)DBC_prev_nodup, METH_VARARGS|METH_KEYWORDS}, + {"join_item", (PyCFunction)DBC_join_item, METH_VARARGS}, + {NULL, NULL} /* sentinel */ +}; + + +static PyMethodDef DBEnv_methods[] = { + {"close", (PyCFunction)DBEnv_close, METH_VARARGS}, + {"open", (PyCFunction)DBEnv_open, METH_VARARGS}, + {"remove", (PyCFunction)DBEnv_remove, METH_VARARGS}, + {"set_cachesize", (PyCFunction)DBEnv_set_cachesize, METH_VARARGS}, + {"set_data_dir", (PyCFunction)DBEnv_set_data_dir, METH_VARARGS}, +#if (DBVER >= 32) + {"set_flags", (PyCFunction)DBEnv_set_flags, METH_VARARGS}, +#endif + {"set_lg_bsize", (PyCFunction)DBEnv_set_lg_bsize, METH_VARARGS}, + {"set_lg_dir", (PyCFunction)DBEnv_set_lg_dir, METH_VARARGS}, + {"set_lg_max", (PyCFunction)DBEnv_set_lg_max, METH_VARARGS}, + {"set_lk_detect", (PyCFunction)DBEnv_set_lk_detect, METH_VARARGS}, + {"set_lk_max", (PyCFunction)DBEnv_set_lk_max, METH_VARARGS}, +#if (DBVER >= 32) + {"set_lk_max_locks", (PyCFunction)DBEnv_set_lk_max_locks, METH_VARARGS}, + {"set_lk_max_lockers", (PyCFunction)DBEnv_set_lk_max_lockers, METH_VARARGS}, + {"set_lk_max_objects", (PyCFunction)DBEnv_set_lk_max_objects, METH_VARARGS}, +#endif + {"set_mp_mmapsize", (PyCFunction)DBEnv_set_mp_mmapsize, METH_VARARGS}, + {"set_tmp_dir", (PyCFunction)DBEnv_set_tmp_dir, METH_VARARGS}, + {"txn_begin", (PyCFunction)DBEnv_txn_begin, METH_VARARGS|METH_KEYWORDS}, + {"txn_checkpoint", (PyCFunction)DBEnv_txn_checkpoint, METH_VARARGS}, + {"txn_stat", (PyCFunction)DBEnv_txn_stat, METH_VARARGS}, + {"set_tx_max", (PyCFunction)DBEnv_set_tx_max, METH_VARARGS}, + {"lock_detect", (PyCFunction)DBEnv_lock_detect, METH_VARARGS}, + {"lock_get", (PyCFunction)DBEnv_lock_get, METH_VARARGS}, + {"lock_id", (PyCFunction)DBEnv_lock_id, METH_VARARGS}, + {"lock_put", (PyCFunction)DBEnv_lock_put, METH_VARARGS}, + {"lock_stat", (PyCFunction)DBEnv_lock_stat, METH_VARARGS}, + {"log_archive", (PyCFunction)DBEnv_log_archive, METH_VARARGS}, + {"set_get_returns_none",(PyCFunction)DBEnv_set_get_returns_none, METH_VARARGS}, + {NULL, NULL} /* sentinel */ +}; + + +static PyMethodDef DBTxn_methods[] = { + {"commit", (PyCFunction)DBTxn_commit, METH_VARARGS}, + {"prepare", (PyCFunction)DBTxn_prepare, METH_VARARGS}, + {"abort", (PyCFunction)DBTxn_abort, METH_VARARGS}, + {"id", (PyCFunction)DBTxn_id, METH_VARARGS}, + {NULL, NULL} /* sentinel */ +}; + + +static PyObject* +DB_getattr(DBObject* self, char *name) +{ + return Py_FindMethod(DB_methods, (PyObject* )self, name); +} + + +static PyObject* +DBEnv_getattr(DBEnvObject* self, char *name) +{ + if (!strcmp(name, "db_home")) { + CHECK_ENV_NOT_CLOSED(self); + if (self->db_env->db_home == NULL) { + RETURN_NONE(); + } + return PyString_FromString(self->db_env->db_home); + } + + return Py_FindMethod(DBEnv_methods, (PyObject* )self, name); +} + + +static PyObject* +DBCursor_getattr(DBCursorObject* self, char *name) +{ + return Py_FindMethod(DBCursor_methods, (PyObject* )self, name); +} + +static PyObject* +DBTxn_getattr(DBTxnObject* self, char *name) +{ + return Py_FindMethod(DBTxn_methods, (PyObject* )self, name); +} + +static PyObject* +DBLock_getattr(DBLockObject* self, char *name) +{ + return NULL; +} + +statichere PyTypeObject DB_Type = { + PyObject_HEAD_INIT(NULL) + 0, /*ob_size*/ + "DB", /*tp_name*/ + sizeof(DBObject), /*tp_basicsize*/ + 0, /*tp_itemsize*/ + /* methods */ + (destructor)DB_dealloc, /*tp_dealloc*/ + 0, /*tp_print*/ + (getattrfunc)DB_getattr, /*tp_getattr*/ + 0, /*tp_setattr*/ + 0, /*tp_compare*/ + 0, /*tp_repr*/ + 0, /*tp_as_number*/ + 0, /*tp_as_sequence*/ + &DB_mapping,/*tp_as_mapping*/ + 0, /*tp_hash*/ +}; + + +statichere PyTypeObject DBCursor_Type = { + PyObject_HEAD_INIT(NULL) + 0, /*ob_size*/ + "DBCursor", /*tp_name*/ + sizeof(DBCursorObject), /*tp_basicsize*/ + 0, /*tp_itemsize*/ + /* methods */ + (destructor)DBCursor_dealloc,/*tp_dealloc*/ + 0, /*tp_print*/ + (getattrfunc)DBCursor_getattr, /*tp_getattr*/ + 0, /*tp_setattr*/ + 0, /*tp_compare*/ + 0, /*tp_repr*/ + 0, /*tp_as_number*/ + 0, /*tp_as_sequence*/ + 0, /*tp_as_mapping*/ + 0, /*tp_hash*/ +}; + + +statichere PyTypeObject DBEnv_Type = { + PyObject_HEAD_INIT(NULL) + 0, /*ob_size*/ + "DBEnv", /*tp_name*/ + sizeof(DBEnvObject), /*tp_basicsize*/ + 0, /*tp_itemsize*/ + /* methods */ + (destructor)DBEnv_dealloc, /*tp_dealloc*/ + 0, /*tp_print*/ + (getattrfunc)DBEnv_getattr, /*tp_getattr*/ + 0, /*tp_setattr*/ + 0, /*tp_compare*/ + 0, /*tp_repr*/ + 0, /*tp_as_number*/ + 0, /*tp_as_sequence*/ + 0, /*tp_as_mapping*/ + 0, /*tp_hash*/ +}; + +statichere PyTypeObject DBTxn_Type = { + PyObject_HEAD_INIT(NULL) + 0, /*ob_size*/ + "DBTxn", /*tp_name*/ + sizeof(DBTxnObject), /*tp_basicsize*/ + 0, /*tp_itemsize*/ + /* methods */ + (destructor)DBTxn_dealloc, /*tp_dealloc*/ + 0, /*tp_print*/ + (getattrfunc)DBTxn_getattr, /*tp_getattr*/ + 0, /*tp_setattr*/ + 0, /*tp_compare*/ + 0, /*tp_repr*/ + 0, /*tp_as_number*/ + 0, /*tp_as_sequence*/ + 0, /*tp_as_mapping*/ + 0, /*tp_hash*/ +}; + + +statichere PyTypeObject DBLock_Type = { + PyObject_HEAD_INIT(NULL) + 0, /*ob_size*/ + "DBLock", /*tp_name*/ + sizeof(DBLockObject), /*tp_basicsize*/ + 0, /*tp_itemsize*/ + /* methods */ + (destructor)DBLock_dealloc, /*tp_dealloc*/ + 0, /*tp_print*/ + (getattrfunc)DBLock_getattr, /*tp_getattr*/ + 0, /*tp_setattr*/ + 0, /*tp_compare*/ + 0, /*tp_repr*/ + 0, /*tp_as_number*/ + 0, /*tp_as_sequence*/ + 0, /*tp_as_mapping*/ + 0, /*tp_hash*/ +}; + + +/* --------------------------------------------------------------------- */ +/* Module-level functions */ + +static PyObject* +DB_construct(PyObject* self, PyObject* args, PyObject* kwargs) +{ + PyObject* dbenvobj = NULL; + int flags = 0; + char* kwnames[] = { "dbEnv", "flags", NULL}; + + if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|Oi:DB", kwnames, &dbenvobj, &flags)) + return NULL; + if (dbenvobj == Py_None) + dbenvobj = NULL; + else if (dbenvobj && !DBEnvObject_Check(dbenvobj)) { + makeTypeError("DBEnv", dbenvobj); + return NULL; + } + + return (PyObject* )newDBObject((DBEnvObject*)dbenvobj, flags); +} + + +static PyObject* +DBEnv_construct(PyObject* self, PyObject* args) +{ + int flags = 0; + if (!PyArg_ParseTuple(args, "|i:DbEnv", &flags)) return NULL; + return (PyObject* )newDBEnvObject(flags); +} + + +static char bsddb_version_doc[] = +"Returns a tuple of major, minor, and patch release numbers of the\n\ +underlying DB library."; + +static PyObject* +bsddb_version(PyObject* self, PyObject* args) +{ + int major, minor, patch; + + if (!PyArg_ParseTuple(args, ":version")) + return NULL; + db_version(&major, &minor, &patch); + return Py_BuildValue("(iii)", major, minor, patch); +} + + +/* List of functions defined in the module */ + +static PyMethodDef bsddb_methods[] = { + {"DB", (PyCFunction)DB_construct, METH_VARARGS | METH_KEYWORDS }, + {"DBEnv", (PyCFunction)DBEnv_construct, METH_VARARGS}, + {"version", (PyCFunction)bsddb_version, METH_VARARGS, bsddb_version_doc}, + {NULL, NULL} /* sentinel */ +}; + + +/* --------------------------------------------------------------------- */ +/* Module initialization */ + + +/* Convenience routine to export an integer value. + * Errors are silently ignored, for better or for worse... + */ +#define ADD_INT(dict, NAME) _addIntToDict(dict, #NAME, NAME) + + + +DL_EXPORT(void) init_bsddb(void) +{ + PyObject* m; + PyObject* d; + PyObject* pybsddb_version_s = PyString_FromString( PY_BSDDB_VERSION ); + PyObject* db_version_s = PyString_FromString( DB_VERSION_STRING ); + PyObject* cvsid_s = PyString_FromString( rcs_id ); + + /* Initialize the type of the new type objects here; doing it here + is required for portability to Windows without requiring C++. */ + DB_Type.ob_type = &PyType_Type; + DBCursor_Type.ob_type = &PyType_Type; + DBEnv_Type.ob_type = &PyType_Type; + DBTxn_Type.ob_type = &PyType_Type; + DBLock_Type.ob_type = &PyType_Type; + + +#ifdef WITH_THREAD + /* Save the current interpreter, so callbacks can do the right thing. */ + _db_interpreterState = PyThreadState_Get()->interp; +#endif + + /* Create the module and add the functions */ + m = Py_InitModule("_bsddb", bsddb_methods); + + /* Add some symbolic constants to the module */ + d = PyModule_GetDict(m); + PyDict_SetItemString(d, "__version__", pybsddb_version_s); + PyDict_SetItemString(d, "cvsid", cvsid_s); + PyDict_SetItemString(d, "DB_VERSION_STRING", db_version_s); + Py_DECREF(pybsddb_version_s); + pybsddb_version_s = NULL; + Py_DECREF(cvsid_s); + cvsid_s = NULL; + Py_DECREF(db_version_s); + db_version_s = NULL; + + ADD_INT(d, DB_VERSION_MAJOR); + ADD_INT(d, DB_VERSION_MINOR); + ADD_INT(d, DB_VERSION_PATCH); + + ADD_INT(d, DB_MAX_PAGES); + ADD_INT(d, DB_MAX_RECORDS); + + ADD_INT(d, DB_CLIENT); + ADD_INT(d, DB_XA_CREATE); + + ADD_INT(d, DB_CREATE); + ADD_INT(d, DB_NOMMAP); + ADD_INT(d, DB_THREAD); + + ADD_INT(d, DB_FORCE); + ADD_INT(d, DB_INIT_CDB); + ADD_INT(d, DB_INIT_LOCK); + ADD_INT(d, DB_INIT_LOG); + ADD_INT(d, DB_INIT_MPOOL); + ADD_INT(d, DB_INIT_TXN); +#if (DBVER >= 32) + ADD_INT(d, DB_JOINENV); +#endif + + ADD_INT(d, DB_RECOVER); + ADD_INT(d, DB_RECOVER_FATAL); + ADD_INT(d, DB_TXN_NOSYNC); + ADD_INT(d, DB_USE_ENVIRON); + ADD_INT(d, DB_USE_ENVIRON_ROOT); + + ADD_INT(d, DB_LOCKDOWN); + ADD_INT(d, DB_PRIVATE); + ADD_INT(d, DB_SYSTEM_MEM); + + ADD_INT(d, DB_TXN_SYNC); + ADD_INT(d, DB_TXN_NOWAIT); + + ADD_INT(d, DB_EXCL); + ADD_INT(d, DB_FCNTL_LOCKING); + ADD_INT(d, DB_ODDFILESIZE); + ADD_INT(d, DB_RDWRMASTER); + ADD_INT(d, DB_RDONLY); + ADD_INT(d, DB_TRUNCATE); +#if (DBVER >= 32) + ADD_INT(d, DB_EXTENT); + ADD_INT(d, DB_CDB_ALLDB); + ADD_INT(d, DB_VERIFY); +#endif + ADD_INT(d, DB_UPGRADE); + + ADD_INT(d, DB_AGGRESSIVE); + ADD_INT(d, DB_NOORDERCHK); + ADD_INT(d, DB_ORDERCHKONLY); + ADD_INT(d, DB_PR_PAGE); +#if ! (DBVER >= 33) + ADD_INT(d, DB_VRFY_FLAGMASK); + ADD_INT(d, DB_PR_HEADERS); +#endif + ADD_INT(d, DB_PR_RECOVERYTEST); + ADD_INT(d, DB_SALVAGE); + + ADD_INT(d, DB_LOCK_NORUN); + ADD_INT(d, DB_LOCK_DEFAULT); + ADD_INT(d, DB_LOCK_OLDEST); + ADD_INT(d, DB_LOCK_RANDOM); + ADD_INT(d, DB_LOCK_YOUNGEST); +#if (DBVER >= 33) + ADD_INT(d, DB_LOCK_MAXLOCKS); + ADD_INT(d, DB_LOCK_MINLOCKS); + ADD_INT(d, DB_LOCK_MINWRITE); +#endif + + +#if (DBVER >= 33) + _addIntToDict(d, "DB_LOCK_CONFLICT", 0); /* docs say to use zero instead */ +#else + ADD_INT(d, DB_LOCK_CONFLICT); +#endif + + ADD_INT(d, DB_LOCK_DUMP); + ADD_INT(d, DB_LOCK_GET); + ADD_INT(d, DB_LOCK_INHERIT); + ADD_INT(d, DB_LOCK_PUT); + ADD_INT(d, DB_LOCK_PUT_ALL); + ADD_INT(d, DB_LOCK_PUT_OBJ); + + ADD_INT(d, DB_LOCK_NG); + ADD_INT(d, DB_LOCK_READ); + ADD_INT(d, DB_LOCK_WRITE); + ADD_INT(d, DB_LOCK_NOWAIT); +#if (DBVER >= 32) + ADD_INT(d, DB_LOCK_WAIT); +#endif + ADD_INT(d, DB_LOCK_IWRITE); + ADD_INT(d, DB_LOCK_IREAD); + ADD_INT(d, DB_LOCK_IWR); +#if (DBVER >= 33) + ADD_INT(d, DB_LOCK_DIRTY); + ADD_INT(d, DB_LOCK_WWRITE); +#endif + + ADD_INT(d, DB_LOCK_RECORD); + ADD_INT(d, DB_LOCK_UPGRADE); +#if (DBVER >= 32) + ADD_INT(d, DB_LOCK_SWITCH); +#endif +#if (DBVER >= 33) + ADD_INT(d, DB_LOCK_UPGRADE_WRITE); +#endif + + ADD_INT(d, DB_LOCK_NOWAIT); + ADD_INT(d, DB_LOCK_RECORD); + ADD_INT(d, DB_LOCK_UPGRADE); + +#if (DBVER >= 33) + ADD_INT(d, DB_LSTAT_ABORTED); + ADD_INT(d, DB_LSTAT_ERR); + ADD_INT(d, DB_LSTAT_FREE); + ADD_INT(d, DB_LSTAT_HELD); +#if (DBVER == 33) + ADD_INT(d, DB_LSTAT_NOGRANT); +#endif + ADD_INT(d, DB_LSTAT_PENDING); + ADD_INT(d, DB_LSTAT_WAITING); +#endif + + ADD_INT(d, DB_ARCH_ABS); + ADD_INT(d, DB_ARCH_DATA); + ADD_INT(d, DB_ARCH_LOG); + + ADD_INT(d, DB_BTREE); + ADD_INT(d, DB_HASH); + ADD_INT(d, DB_RECNO); + ADD_INT(d, DB_QUEUE); + ADD_INT(d, DB_UNKNOWN); + + ADD_INT(d, DB_DUP); + ADD_INT(d, DB_DUPSORT); + ADD_INT(d, DB_RECNUM); + ADD_INT(d, DB_RENUMBER); + ADD_INT(d, DB_REVSPLITOFF); + ADD_INT(d, DB_SNAPSHOT); + + ADD_INT(d, DB_JOIN_NOSORT); + + ADD_INT(d, DB_AFTER); + ADD_INT(d, DB_APPEND); + ADD_INT(d, DB_BEFORE); + ADD_INT(d, DB_CACHED_COUNTS); + ADD_INT(d, DB_CHECKPOINT); +#if (DBVER >= 33) + ADD_INT(d, DB_COMMIT); +#endif + ADD_INT(d, DB_CONSUME); +#if (DBVER >= 32) + ADD_INT(d, DB_CONSUME_WAIT); +#endif + ADD_INT(d, DB_CURLSN); + ADD_INT(d, DB_CURRENT); +#if (DBVER >= 33) + ADD_INT(d, DB_FAST_STAT); +#endif + ADD_INT(d, DB_FIRST); + ADD_INT(d, DB_FLUSH); + ADD_INT(d, DB_GET_BOTH); + ADD_INT(d, DB_GET_RECNO); + ADD_INT(d, DB_JOIN_ITEM); + ADD_INT(d, DB_KEYFIRST); + ADD_INT(d, DB_KEYLAST); + ADD_INT(d, DB_LAST); + ADD_INT(d, DB_NEXT); + ADD_INT(d, DB_NEXT_DUP); + ADD_INT(d, DB_NEXT_NODUP); + ADD_INT(d, DB_NODUPDATA); + ADD_INT(d, DB_NOOVERWRITE); + ADD_INT(d, DB_NOSYNC); + ADD_INT(d, DB_POSITION); + ADD_INT(d, DB_PREV); + ADD_INT(d, DB_PREV_NODUP); + ADD_INT(d, DB_RECORDCOUNT); + ADD_INT(d, DB_SET); + ADD_INT(d, DB_SET_RANGE); + ADD_INT(d, DB_SET_RECNO); + ADD_INT(d, DB_WRITECURSOR); + + ADD_INT(d, DB_OPFLAGS_MASK); + ADD_INT(d, DB_RMW); +#if (DBVER >= 33) + ADD_INT(d, DB_DIRTY_READ); + ADD_INT(d, DB_MULTIPLE); + ADD_INT(d, DB_MULTIPLE_KEY); +#endif + +#if (DBVER >= 33) + ADD_INT(d, DB_DONOTINDEX); +#endif + + ADD_INT(d, DB_INCOMPLETE); + ADD_INT(d, DB_KEYEMPTY); + ADD_INT(d, DB_KEYEXIST); + ADD_INT(d, DB_LOCK_DEADLOCK); + ADD_INT(d, DB_LOCK_NOTGRANTED); + ADD_INT(d, DB_NOSERVER); + ADD_INT(d, DB_NOSERVER_HOME); + ADD_INT(d, DB_NOSERVER_ID); + ADD_INT(d, DB_NOTFOUND); + ADD_INT(d, DB_OLD_VERSION); + ADD_INT(d, DB_RUNRECOVERY); + ADD_INT(d, DB_VERIFY_BAD); +#if (DBVER >= 33) + ADD_INT(d, DB_PAGE_NOTFOUND); + ADD_INT(d, DB_SECONDARY_BAD); +#endif +#if (DBVER >= 40) + ADD_INT(d, DB_STAT_CLEAR); + ADD_INT(d, DB_REGION_INIT); + ADD_INT(d, DB_NOLOCKING); + ADD_INT(d, DB_YIELDCPU); + ADD_INT(d, DB_PANIC_ENVIRONMENT); + ADD_INT(d, DB_NOPANIC); +#endif + + ADD_INT(d, EINVAL); + ADD_INT(d, EACCES); + ADD_INT(d, ENOSPC); + ADD_INT(d, ENOMEM); + ADD_INT(d, EAGAIN); + ADD_INT(d, EBUSY); + ADD_INT(d, EEXIST); + ADD_INT(d, ENOENT); + ADD_INT(d, EPERM); + + + + /* The base exception class is DBError */ + DBError = PyErr_NewException("bsddb3._db.DBError", NULL, NULL); + PyDict_SetItemString(d, "DBError", DBError); + + /* Some magic to make DBNotFoundError derive from both DBError and + KeyError, since the API only supports using one base class. */ + PyDict_SetItemString(d, "KeyError", PyExc_KeyError); + PyRun_String("class DBNotFoundError(DBError, KeyError): pass", + Py_file_input, d, d); + DBNotFoundError = PyDict_GetItemString(d, "DBNotFoundError"); + PyDict_DelItemString(d, "KeyError"); + + + /* All the rest of the exceptions derive only from DBError */ +#define MAKE_EX(name) name = PyErr_NewException("bsddb3._db." #name, DBError, NULL); \ + PyDict_SetItemString(d, #name, name) + +#if !INCOMPLETE_IS_WARNING + MAKE_EX(DBIncompleteError); +#endif + MAKE_EX(DBKeyEmptyError); + MAKE_EX(DBKeyExistError); + MAKE_EX(DBLockDeadlockError); + MAKE_EX(DBLockNotGrantedError); + MAKE_EX(DBOldVersionError); + MAKE_EX(DBRunRecoveryError); + MAKE_EX(DBVerifyBadError); + MAKE_EX(DBNoServerError); + MAKE_EX(DBNoServerHomeError); + MAKE_EX(DBNoServerIDError); +#if (DBVER >= 33) + MAKE_EX(DBPageNotFoundError); + MAKE_EX(DBSecondaryBadError); +#endif + + MAKE_EX(DBInvalidArgError); + MAKE_EX(DBAccessError); + MAKE_EX(DBNoSpaceError); + MAKE_EX(DBNoMemoryError); + MAKE_EX(DBAgainError); + MAKE_EX(DBBusyError); + MAKE_EX(DBFileExistsError); + MAKE_EX(DBNoSuchFileError); + MAKE_EX(DBPermissionsError); + +#undef MAKE_EX + + /* Check for errors */ + if (PyErr_Occurred()) { + PyErr_Print(); + Py_FatalError("can't initialize module _db"); + } +} + + + diff --git a/Modules/bsddbmodule.c b/Modules/bsddbmodule.c index 918a0fc..1319bf9 100644 --- a/Modules/bsddbmodule.c +++ b/Modules/bsddbmodule.c @@ -842,11 +842,11 @@ static PyMethodDef bsddbmodule_methods[] = { }; PyMODINIT_FUNC -initbsddb(void) { +initbsddb185(void) { PyObject *m, *d; Bsddbtype.ob_type = &PyType_Type; - m = Py_InitModule("bsddb", bsddbmodule_methods); + m = Py_InitModule("bsddb185", bsddbmodule_methods); d = PyModule_GetDict(m); BsddbError = PyErr_NewException("bsddb.error", NULL, NULL); if (BsddbError != NULL) |