summaryrefslogtreecommitdiffstats
path: root/Python/thread_pthread.h
Commit message (Collapse)AuthorAgeFilesLines
* Patch #1454481: Make thread stack size runtime tunable.Andrew MacIntyre2006-06-131-3/+74
| | | | | | | | | | Heavily revised, comprising revisions: 46640 - original trunk revision (backed out in r46655) 46647 - markup fix (backed out in r46655) 46692:46918 merged from branch aimacintyre-sf1454481 branch tested on buildbots (Windows buildbots had problems not related to these changes).
* Revert revisions:Tim Peters2006-06-041-61/+2
| | | | | | | | | | | | | | | | 46640 Patch #1454481: Make thread stack size runtime tunable. 46647 Markup fix The first is causing many buildbots to fail test runs, and there are multiple causes with seemingly no immediate prospects for repairing them. See python-dev discussion. Note that a branch can (and should) be created for resolving these problems, like svn copy svn+ssh://svn.python.org/python/trunk -r46640 svn+ssh://svn.python.org/python/branches/NEW_BRANCH followed by merging rev 46647 to the new branch.
* Patch #1454481: Make thread stack size runtime tunable.Andrew MacIntyre2006-06-041-2/+61
|
* Patch #1396919: Reenable the system scope threads on FreeBSD 5.4Hye-Shik Chang2006-03-231-1/+11
| | | | | and later versions because they bumped the default setting to get our basic tests to run correctly..
* Don't call memset() before checking that the ptr is not NULL.Armin Rigo2005-09-201-1/+1
|
* Add 0 to _POSIX_SEMAPHORES. Will backport to 2.4.Martin v. Löwis2005-03-281-1/+3
|
* Patch #1163249 - Correctly handle _POSIX_SEMAPHORES == -1 to mean noAnthony Baxter2005-03-161-0/+4
| | | | support for posix semaphores.
* This closes patch:Michael W. Hudson2004-07-071-11/+0
| | | | | | | | | | | | | | | | | [ 960406 ] unblock signals in threads although the changes do not correspond exactly to any patch attached to that report. Non-main threads no longer have all signals masked. A different interface to readline is used. The handling of signals inside calls to PyOS_Readline is now rather different. These changes are all a bit scary! Review and cross-platform testing much appreciated.
* SF Patch #902444: Use process scope thread on FreeBSD. System scopeHye-Shik Chang2004-03-041-1/+1
| | | | | is too expensive on FreeBSD's KSE threading infrastructure and even test_threadedimport fails on default setting.
* typoSkip Montanaro2004-03-031-1/+1
|
* Remove support for systems defining Py_PTHREAD_D[467] inSkip Montanaro2004-02-071-72/+0
| | | | Python/thread_pthread.h.
* remove DGUX support.Skip Montanaro2004-01-171-10/+2
|
* Getting rid of code dependent on GUSI or the MetroWerks compiler.Jack Jansen2003-11-191-8/+0
|
* Patch 775605: Cygwin pthread_sigmask() workaround patchJason Tishler2003-07-221-1/+1
| | | | | | | | | | | | | | | | | | Cygwin's pthread_sigmask() implementation appears to be buggy. This patch works around this problem by using sigprocmask() instead. This patch is implemented in a general way so it could be used by other platforms too. If this approach is deemed too risky, then I can work up a patch that just hacks Python/thread_pthread.h for Cygwin. Note that I tested this patch against 2.3c1 under Red Hat Linux 8.0 too. [snip] And finally, I need someone to regenerate pyconfig.h.in and configure with the same versions of the autotools that are normally used by Python. Neal kindly regenerated pyconfig.h.in and configure for me.
* Patch #716969: Detect thread creation failure. Will backport to 2.2.Martin v. Löwis2003-04-191-6/+8
|
* Patch #711835: Remove unnecessary lock operations. Will backport to 2.2.Martin v. Löwis2003-04-181-8/+4
|
* Don't use Posix semaphores on Solaris 8. Fixes #662787.Martin v. Löwis2003-01-211-1/+1
|
* Patch #650415: Avoid redefinition of macros.Martin v. Löwis2002-12-111-0/+12
|
* Add compile-time errors for unsupported systems.Martin v. Löwis2002-12-021-0/+5
|
* Patch #618347: Work around Solaris 2.6 pthread.h bug. Will backport to 2.2.Martin v. Löwis2002-10-041-2/+2
|
* Document that _POSIX_SEMAPHORES is predefined.Martin v. Löwis2002-03-171-0/+4
|
* Patch #525532: Add support for POSIX semaphores.Martin v. Löwis2002-03-171-0/+119
|
* Remove the unused & broken PyThread_*_sema() functions and related constants.Fred Drake2002-01-191-98/+0
| | | | This closes SF patch #504215.
* Workaround for what is probably a problem in Apple's gcc: <pthread.h> failsJack Jansen2002-01-151-0/+6
| | | | | on a function pointer formal argument called "destructor", which is typedeffed as a different function pointer type in object.h.
* Fix memory leak. This is part of SF patch #478006.Fred Drake2001-11-091-1/+1
|
* Partial patch from SF #452266, by Jason Petrone.Guido van Rossum2001-10-161-2/+6
| | | | | | This changes Pythread_start_thread() to return the thread ID, or -1 for an error. (It's technically an incompatible API change, but I doubt anyone calls it.)
* Do not define _POSIX_THREADS if unistd.h defines it.Martin v. Löwis2001-10-151-1/+1
| | | | Check for pthread_sigmask before using it. Fixes remaining problem in #470781.
* Add SF patch #468347 -- mask signals for non-main pthreads, by Jason Lowe:Guido van Rossum2001-10-121-0/+26
| | | | | | | | | | | | | | | | | | | This patch updates Python/thread_pthread.h to mask all signals for any thread created. This will keep all signals masked for any thread that isn't the initial thread. For Solaris and Linux, the two platforms I was able to test it on, it solves bug #465673 (pthreads need signal protection) and probably will solve bug #219772 (Interactive InterPreter+ Thread -> core dump at exit). I'd be great if this could get some testing on other platforms, especially HP-UX pre 11.00 and post 11.00, as I had to make some guesses for the DCE thread case. AIX is also a concern as I saw some mention of using sigthreadmask() as a pthread_sigmask() equivalent, but this patch doesn't use sigthreadmask(). I don't have access to AIX.
* Improve threading on Solaris, according to SF patch #460269, submittedGuido van Rossum2001-09-101-3/+8
| | | | | | | | | | by bbrox@bbrox.org / lionel.ulmer@free.fr. This adds a configure check and if all goes well turns on the PTHREAD_SCOPE_SYSTEM thread attribute for new threads. This should remove the need to add tiny sleeps at the start of threads to allow other threads to be scheduled.
* GUSI on the Mac creates threads with a default stack size of 20KB, which isJack Jansen2001-08-291-1/+21
| | | | | not enough for Python. Increased the stacksize to a (somewhat arbitrary) 64KB.
* REMOVED all CWI, CNRI and BeOpen copyright markings.Guido van Rossum2000-09-011-9/+0
| | | | This should match the situation in the 1.6b1 tree.
* This patch partly (some stuff went in already) ports Python to Monterey.Trent Mick2000-08-231-0/+11
| | | | | | | | | | - Fix bug in thread_pthread.h::PyThread_get_thread_ident() where sizeof(pthread) < sizeof(long). - Add 'configure' for: - SIZEOF_PTHREAD is pthread_t can be included via <pthread.h> - setting Monterey system name - appropriate CC,LINKCC,LDSHARED,OPT, and CCSHARED for Monterey - Add section in README for Monterey build
* Mass ANSIfication of function definitions. Doesn't cover all 'extern'Thomas Wouters2000-07-221-21/+40
| | | | declarations yet, those come later.
* Change copyright notice - 2nd try.Guido van Rossum2000-06-301-6/+0
|
* Change copyright notice.Guido van Rossum2000-06-301-22/+7
|
* Trent Mick <trentm@activestate.com>:Fred Drake2000-06-301-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | The common technique for printing out a pointer has been to cast to a long and use the "%lx" printf modifier. This is incorrect on Win64 where casting to a long truncates the pointer. The "%p" formatter should be used instead. The problem as stated by Tim: > Unfortunately, the C committee refused to define what %p conversion "looks > like" -- they explicitly allowed it to be implementation-defined. Older > versions of Microsoft C even stuck a colon in the middle of the address (in > the days of segment+offset addressing)! The result is that the hex value of a pointer will maybe/maybe not have a 0x prepended to it. Notes on the patch: There are two main classes of changes: - in the various repr() functions that print out pointers - debugging printf's in the various thread_*.h files (these are why the patch is large) Closes SourceForge patch #100505.
* Rob Riggs wrote:Guido van Rossum1999-03-151-2/+2
| | | | | | | | | | | | | | | """ Spec says that on success pthread_create returns 0. It does not say that an error code will be < 0. Linux glibc2 pthread_create() returns ENOMEM (12) when one exceed process limits. (It looks like it should return EAGAIN, but that's another story.) For reference, see: http://www.opengroup.org/onlinepubs/7908799/xsh/pthread_create.html """ [I have a feeling that similar bugs were fixed before; perhaps someone could check that all error checks no check for != 0?]
* Thanks to Chris Herborth, the thread primitives now have proper Py*Guido van Rossum1998-12-211-43/+43
| | | | | names in the source code (they already had those for the linker, through some smart macros; but the source still had the old, un-Py names).
* BSDI specific patches, inspired by Nigel Head and otto@mail.olympus.net.Guido van Rossum1998-10-071-1/+22
| | | | | | | | | | | Also (non-BSDI specific): - Change the CHECK_STATUS() macro so it tests for nonzero error codes instead of negative error codes only (this was needed for BSDI, but appears to be correct according to the PTHREADS spec). - use memset() to zero out the allocated lock structure. Again, this was needed for BSDI, but can't hurt elsewhere either.
* Apparently on AIX when using gcc you need to call pthread_init()Guido van Rossum1998-09-101-0/+3
| | | | | (which is not a POSIX threads call!). Reported and confirmed by Brad Howes.
* Correct typo in #ifdef: PY_THREAD_D4, should be PY_PTHREAD_D4.Guido van Rossum1998-09-041-1/+1
| | | | Reported by Jonathan Giddy.
* Add a 'volatile' to the declaration of threadid in get_thread_ident().Guido van Rossum1998-08-271-1/+1
| | | | | According to Vladimir Marangozov, this is necessary for AIX, where high optimization levels inline this function and then get it wrong :-(
* Improved version of patch for HPUX from David Arnold.Guido van Rossum1998-05-141-4/+1
|
* Support HPUX 10.20 DCE threads.Guido van Rossum1998-05-071-0/+6
|
* Make new gcc -Wall happyGuido van Rossum1998-04-101-1/+2
|
* Add default case (standard conformance) to avoid piling upGuido van Rossum1997-06-021-4/+4
| | | | system specific #ifdefs.
* DG/UX thread patches (Ross Andrus)Guido van Rossum1997-05-221-3/+8
|
* Add pthred-std define for Linux.Guido van Rossum1997-05-151-0/+2
|
* Support for various versions of the pthread draft.Guido van Rossum1997-05-131-12/+64
|
* Add detach call so threads are GC'ed.Guido van Rossum1997-04-301-0/+2
|
generated by cgit v0.12 at 2024-11-22 00:10:27 (GMT)