From 082d28912f5ca45a179a7d51a8eee8b0d1ecbab6 Mon Sep 17 00:00:00 2001 From: Guido van Rossum Date: Fri, 16 May 1997 16:24:09 +0000 Subject: Added CRLF for Notepad. --- PC/readme.txt | 320 +++++++++++++++++++++++++++++----------------------------- 1 file changed, 160 insertions(+), 160 deletions(-) diff --git a/PC/readme.txt b/PC/readme.txt index 62a2ae9..b5df029 100644 --- a/PC/readme.txt +++ b/PC/readme.txt @@ -1,160 +1,160 @@ -Welcome to the "PC" subdirectory of the Python distribution! -************************************************************ - - -This "PC" subdirectory contains complete project files to make -several PC ports of Python, as well as all the PC-specific -Python source files. It should be located in the root of the -Python distribution, and there should be directories "Modules", -"Objects", "Python", etc. in the parent directory of this "PC" -subdirectory. - -Be sure to read the documentation in the Python distribution. You -must set the environment variable PYTHONPATH to point to your Python -library directory. This is "../Lib", but you must use an absolute path, -and perhaps copy it somewhere else. Be sure to include the Windows -specific directory "win" too. If you use a DOS FAT file system and -either a DOS or Windows 3.1x Python version, you should also put -../Lib/dos_8x3 on your PYTHONPATH too, since it has DOS 8x3 names -for the standard Python library names. So your autoexec.bat should have: - set PYTHONPATH=.;c:\python\lib;c:\python\lib\win -for Windows NT or - set PYTHONPATH=.;c:\python\lib;c:\python\lib\win;c:\python\lib\dos_8x3 -for DOS or Windows 3.1x (change the path to the correct path). - -There are several add-in modules to build Python programs which use -the native Windows operating environment. The ports here just make -"QuickWin" and DOS Python versions which support a character-mode -(console) environment. Look in www.python.org for Tkinter, PythonWin, -WPY and wxPython. - -To make a Python port, start the Integrated Development Environment -(IDE) of your compiler, and read in the native "project file" -(or makefile) provided. This will enable you to change any source -files or build settings so you can make custom builds. - -config.h An important configuration file specific to PC's. - -config.c The list of C modules to include in the Python PC - version. Manually edit this file to add or - remove Python modules. - -testpy.py A Python test program. Run this to test your - Python port. It should say "all tests OK". - -src A subdirectory used only for VC++ version 1.5 Python - source files. See below. The other compilers do not - use it. They reference the actual distribution - directories instead. - - -Microsoft Visual C++ Version 4.0 (32-bit Windows) -================================================= - -(While we have done all our testing with VC version 4.0, we are -confident that the same procedure will work for versions 4.1 and 4.2.) - -The distributed Makefile is vc40.mak. This file is distributed with -CRLF line separators, otherwise Developer Studio won't like it. It -will NOT work from this PC directory. To use it, first copy it to the -Python distribution directory, e.g. with this command: - copy vc40.mak .. -To convert the Makefile into a project file, start Developer Studio, -choose Open Workspace, change the file name pattern to *.mak, find and -select the file vc40.mak, and click OK. Developer Studio will create -additional project files vc40.ncb and vc40.mdp when you use the -project. The project contains six targets, which should be built in -this order: - -python14 The Python core as a DLL, named python14.dll. - -python The Python main program, named python.exe. This should - work as a console program under Windows 95 or NT, as well - as under Windows 3.1(1) when using win32s. It uses - python14.dll. - -_tkinter The optional _tkinter extension, _tkinter.dll; see below. - -ALl end products of the compilation are placed in the subdirectory -vc40 (which Developer Studio creates); object files are placed in -vc40/tmp. There are no separate Release and Debug project variants. -Note that the python and _tkinter projects require that the -python14.lib file exists in the vc40 subdirectory before they can be -built. - -*** How to build the _tkinter extension *** - -This assumes that you have installed the Tcl/Tk binary distribution for -Windows 95/NT with version numbers 7.5p1/4.1p1, in the default -installation location (C:\tcl). (Ftp to ftp.sunlabs.com in /pub/tcl, -file win41p1.exe.) You must also fetch and unpack the zip file -vclibs41.zip which contains the files tcl75.lib and tk41.lib, and place -those files in the PC subdirectory. In order to use _tkinter, the -Tkinter.py module must be on PYTHONPATH. It is found in the -Lib\tkinter subdirectory. - - -Additional files and subdirectories for 32-bit Windows -====================================================== - -python_nt.def Exports definition file for python14.dll. - -python_nt.rc Resource compiler input for python14.dll. - -dl_nt.c, getpath_nt.c, import_nt.c - Additional sources used for 32-bit Windows features. - -main_nt.c Source for python.exe. - -dllbase_nt.txt A (manually maintained) list of base addresses for - various DLLs, to avoid run-time relocation. - -_tkinter.def The export definitions file for _tkinter.dll. - -make_nt.in Include file for nmake-based builds (unsupported). - -example_nt A subdirectory showing how to build an extension as a - DLL. - -setup_nt A subdirectory containing an experimental installer - using Python only. - - -Microsoft Visual C++ Version 1.5 (16-bit Windows) -================================================= - -Since VC++1.5 does not handle long file names, it is necessary -to run the "makesrc.exe" program in this directory to copy -Python files from the distribution to the directory "src" -with shortened names. Included file names are shortened too. -Do this before you attempt to build Python. - -The "makesrc.exe" program is a native NT program, and you must -have NT, Windows 95 or Win32s to run it. Otherwise you will need -to copy distribution files to src yourself. - -The makefiles are named *.mak and are located in directories -starting with "vc15_". NOTE: When dependencies are scanned -VC++ will create dependencies for directories which are not -used because it fails to evaluate "#define" properly. You -must manaully edit makefiles (*.mak) to remove references to -"sys/" and other bad directories. - -vc15_lib A static Python library. Create this first because is - is required for vc15_w31. - -vc15_w31 A Windows 3.1x Python QuickWin (console-mode) - Python including sockets. Requires vc15_lib. - - -Watcom C++ Version 10.6 -======================= - -The project file for the Watcom compiler is ./python.wpj. -It will build Watcom versions in the directories wat_*. - -wat_dos A 32-bit extended DOS Python (console-mode) using the - dos4gw DOS extender. Sockets are not included. - -wat_os2 A 32-bit OS/2 Python (console-mode). - Sockets are not included. +Welcome to the "PC" subdirectory of the Python distribution! +************************************************************ + + +This "PC" subdirectory contains complete project files to make +several PC ports of Python, as well as all the PC-specific +Python source files. It should be located in the root of the +Python distribution, and there should be directories "Modules", +"Objects", "Python", etc. in the parent directory of this "PC" +subdirectory. + +Be sure to read the documentation in the Python distribution. You +must set the environment variable PYTHONPATH to point to your Python +library directory. This is "../Lib", but you must use an absolute path, +and perhaps copy it somewhere else. Be sure to include the Windows +specific directory "win" too. If you use a DOS FAT file system and +either a DOS or Windows 3.1x Python version, you should also put +../Lib/dos_8x3 on your PYTHONPATH too, since it has DOS 8x3 names +for the standard Python library names. So your autoexec.bat should have: + set PYTHONPATH=.;c:\python\lib;c:\python\lib\win +for Windows NT or + set PYTHONPATH=.;c:\python\lib;c:\python\lib\win;c:\python\lib\dos_8x3 +for DOS or Windows 3.1x (change the path to the correct path). + +There are several add-in modules to build Python programs which use +the native Windows operating environment. The ports here just make +"QuickWin" and DOS Python versions which support a character-mode +(console) environment. Look in www.python.org for Tkinter, PythonWin, +WPY and wxPython. + +To make a Python port, start the Integrated Development Environment +(IDE) of your compiler, and read in the native "project file" +(or makefile) provided. This will enable you to change any source +files or build settings so you can make custom builds. + +config.h An important configuration file specific to PC's. + +config.c The list of C modules to include in the Python PC + version. Manually edit this file to add or + remove Python modules. + +testpy.py A Python test program. Run this to test your + Python port. It should say "all tests OK". + +src A subdirectory used only for VC++ version 1.5 Python + source files. See below. The other compilers do not + use it. They reference the actual distribution + directories instead. + + +Microsoft Visual C++ Version 4.0 (32-bit Windows) +================================================= + +(While we have done all our testing with VC version 4.0, we are +confident that the same procedure will work for versions 4.1 and 4.2.) + +The distributed Makefile is vc40.mak. This file is distributed with +CRLF line separators, otherwise Developer Studio won't like it. It +will NOT work from this PC directory. To use it, first copy it to the +Python distribution directory, e.g. with this command: + copy vc40.mak .. +To convert the Makefile into a project file, start Developer Studio, +choose Open Workspace, change the file name pattern to *.mak, find and +select the file vc40.mak, and click OK. Developer Studio will create +additional project files vc40.ncb and vc40.mdp when you use the +project. The project contains six targets, which should be built in +this order: + +python14 The Python core as a DLL, named python14.dll. + +python The Python main program, named python.exe. This should + work as a console program under Windows 95 or NT, as well + as under Windows 3.1(1) when using win32s. It uses + python14.dll. + +_tkinter The optional _tkinter extension, _tkinter.dll; see below. + +ALl end products of the compilation are placed in the subdirectory +vc40 (which Developer Studio creates); object files are placed in +vc40/tmp. There are no separate Release and Debug project variants. +Note that the python and _tkinter projects require that the +python14.lib file exists in the vc40 subdirectory before they can be +built. + +*** How to build the _tkinter extension *** + +This assumes that you have installed the Tcl/Tk binary distribution for +Windows 95/NT with version numbers 7.5p1/4.1p1, in the default +installation location (C:\tcl). (Ftp to ftp.sunlabs.com in /pub/tcl, +file win41p1.exe.) You must also fetch and unpack the zip file +vclibs41.zip which contains the files tcl75.lib and tk41.lib, and place +those files in the PC subdirectory. In order to use _tkinter, the +Tkinter.py module must be on PYTHONPATH. It is found in the +Lib\tkinter subdirectory. + + +Additional files and subdirectories for 32-bit Windows +====================================================== + +python_nt.def Exports definition file for python14.dll. + +python_nt.rc Resource compiler input for python14.dll. + +dl_nt.c, getpath_nt.c, import_nt.c + Additional sources used for 32-bit Windows features. + +main_nt.c Source for python.exe. + +dllbase_nt.txt A (manually maintained) list of base addresses for + various DLLs, to avoid run-time relocation. + +_tkinter.def The export definitions file for _tkinter.dll. + +make_nt.in Include file for nmake-based builds (unsupported). + +example_nt A subdirectory showing how to build an extension as a + DLL. + +setup_nt A subdirectory containing an experimental installer + using Python only. + + +Microsoft Visual C++ Version 1.5 (16-bit Windows) +================================================= + +Since VC++1.5 does not handle long file names, it is necessary +to run the "makesrc.exe" program in this directory to copy +Python files from the distribution to the directory "src" +with shortened names. Included file names are shortened too. +Do this before you attempt to build Python. + +The "makesrc.exe" program is a native NT program, and you must +have NT, Windows 95 or Win32s to run it. Otherwise you will need +to copy distribution files to src yourself. + +The makefiles are named *.mak and are located in directories +starting with "vc15_". NOTE: When dependencies are scanned +VC++ will create dependencies for directories which are not +used because it fails to evaluate "#define" properly. You +must manaully edit makefiles (*.mak) to remove references to +"sys/" and other bad directories. + +vc15_lib A static Python library. Create this first because is + is required for vc15_w31. + +vc15_w31 A Windows 3.1x Python QuickWin (console-mode) + Python including sockets. Requires vc15_lib. + + +Watcom C++ Version 10.6 +======================= + +The project file for the Watcom compiler is ./python.wpj. +It will build Watcom versions in the directories wat_*. + +wat_dos A 32-bit extended DOS Python (console-mode) using the + dos4gw DOS extender. Sockets are not included. + +wat_os2 A 32-bit OS/2 Python (console-mode). + Sockets are not included. -- cgit v0.12