From 16aac45fc269ad355f069d5f76a0f4cafd06063f Mon Sep 17 00:00:00 2001 From: Guido van Rossum Date: Tue, 17 Sep 2002 20:36:40 +0000 Subject: Remove the SGI demos. These were all ancient and nobody cared enough. --- Demo/README | 6 - Demo/sgi/al/.cvsignore | 1 - Demo/sgi/cd/CD.doc | 46 -- Demo/sgi/cd/README | 28 - Demo/sgi/cd/cdaiff.py | 33 -- Demo/sgi/cd/listcd.py | 24 - Demo/sgi/cd/playcd.py | 102 ---- Demo/sgi/cd/recvcd.py | 36 -- Demo/sgi/cd/sendcd.py | 154 ----- Demo/sgi/flp/.cvsignore | 1 - Demo/sgi/flp/tcache.fd | 51 -- Demo/sgi/flp/tcache.py | 32 - Demo/sgi/flp/test_cb.fd | 75 --- Demo/sgi/flp/test_cb.py | 61 -- Demo/sgi/flp/test_nocb.fd | 75 --- Demo/sgi/flp/test_nocb.py | 45 -- Demo/sgi/gl/README | 35 -- Demo/sgi/gl/backface.py | 140 ----- Demo/sgi/gl/glinfo.py | 20 - Demo/sgi/gl/kites.py | 194 ------- Demo/sgi/gl/kunst.py | 426 -------------- Demo/sgi/gl/mclock.doc | 60 -- Demo/sgi/gl/mclock.py | 736 ----------------------- Demo/sgi/gl/mixing.py | 116 ---- Demo/sgi/gl/nurbs.py | 171 ------ Demo/sgi/gl/zrgb.py | 168 ------ Demo/sgi/video/.cvsignore | 1 - Demo/sgi/video/DisplayVideoIn.py | 99 ---- Demo/sgi/video/Dsend.py | 188 ------ Demo/sgi/video/LiveVideoIn.py | 139 ----- Demo/sgi/video/LiveVideoOut.py | 130 ----- Demo/sgi/video/OldVcopy.py | 148 ----- Demo/sgi/video/README | 113 ---- Demo/sgi/video/VCR.py | 534 ----------------- Demo/sgi/video/VFile.py | 1193 -------------------------------------- Demo/sgi/video/VGrabber.py | 80 --- Demo/sgi/video/Vaddcache.py | 80 --- Demo/sgi/video/Vb.py | 962 ------------------------------ Demo/sgi/video/VbForm.fd | 615 -------------------- Demo/sgi/video/Vcopy.py | 291 ---------- Demo/sgi/video/VcrIndex.py | 327 ----------- Demo/sgi/video/Vedit.py | 301 ---------- Demo/sgi/video/VeditForm.fd | 435 -------------- Demo/sgi/video/Vfix.py | 90 --- Demo/sgi/video/Vgeneric.py | 2 - Demo/sgi/video/Viewer.py | 255 -------- Demo/sgi/video/Vinfo.py | 174 ------ Demo/sgi/video/Vmkjpeg.py | 92 --- Demo/sgi/video/Vplay.py | 355 ------------ Demo/sgi/video/Vrec.py | 413 ------------- Demo/sgi/video/Vrecb.py | 429 -------------- Demo/sgi/video/Vreceive.py | 135 ----- Demo/sgi/video/Vsend.py | 152 ----- Demo/sgi/video/Vstat.py | 23 - Demo/sgi/video/Vtime.py | 117 ---- Demo/sgi/video/Vunjpeg.py | 97 ---- Demo/sgi/video/aplay.py | 167 ------ Demo/sgi/video/cmif-film.ms | 200 ------- Demo/sgi/video/imgconv.py | 139 ----- Demo/sgi/video/rgb2video.py | 79 --- Demo/sgi/video/senddefs.py | 11 - Demo/sgi/video/svgrab24.c | 97 ---- Demo/sgi/video/vcopy.py | 134 ----- Demo/sgi/video/video.doc | 109 ---- Demo/sgi/video/video2rgb.py | 159 ----- Demo/sgi/video/vinfo.py | 90 --- Demo/sgi/video/vtime.py | 106 ---- Demo/sgi/video/watchcursor.py | 45 -- 68 files changed, 12142 deletions(-) delete mode 100644 Demo/sgi/al/.cvsignore delete mode 100755 Demo/sgi/cd/CD.doc delete mode 100644 Demo/sgi/cd/README delete mode 100755 Demo/sgi/cd/cdaiff.py delete mode 100755 Demo/sgi/cd/listcd.py delete mode 100755 Demo/sgi/cd/playcd.py delete mode 100755 Demo/sgi/cd/recvcd.py delete mode 100755 Demo/sgi/cd/sendcd.py delete mode 100644 Demo/sgi/flp/.cvsignore delete mode 100755 Demo/sgi/flp/tcache.fd delete mode 100755 Demo/sgi/flp/tcache.py delete mode 100755 Demo/sgi/flp/test_cb.fd delete mode 100755 Demo/sgi/flp/test_cb.py delete mode 100755 Demo/sgi/flp/test_nocb.fd delete mode 100755 Demo/sgi/flp/test_nocb.py delete mode 100644 Demo/sgi/gl/README delete mode 100755 Demo/sgi/gl/backface.py delete mode 100755 Demo/sgi/gl/glinfo.py delete mode 100755 Demo/sgi/gl/kites.py delete mode 100755 Demo/sgi/gl/kunst.py delete mode 100755 Demo/sgi/gl/mclock.doc delete mode 100755 Demo/sgi/gl/mclock.py delete mode 100755 Demo/sgi/gl/mixing.py delete mode 100755 Demo/sgi/gl/nurbs.py delete mode 100755 Demo/sgi/gl/zrgb.py delete mode 100755 Demo/sgi/video/.cvsignore delete mode 100755 Demo/sgi/video/DisplayVideoIn.py delete mode 100755 Demo/sgi/video/Dsend.py delete mode 100755 Demo/sgi/video/LiveVideoIn.py delete mode 100755 Demo/sgi/video/LiveVideoOut.py delete mode 100755 Demo/sgi/video/OldVcopy.py delete mode 100644 Demo/sgi/video/README delete mode 100755 Demo/sgi/video/VCR.py delete mode 100755 Demo/sgi/video/VFile.py delete mode 100755 Demo/sgi/video/VGrabber.py delete mode 100755 Demo/sgi/video/Vaddcache.py delete mode 100755 Demo/sgi/video/Vb.py delete mode 100644 Demo/sgi/video/VbForm.fd delete mode 100755 Demo/sgi/video/Vcopy.py delete mode 100755 Demo/sgi/video/VcrIndex.py delete mode 100755 Demo/sgi/video/Vedit.py delete mode 100644 Demo/sgi/video/VeditForm.fd delete mode 100755 Demo/sgi/video/Vfix.py delete mode 100755 Demo/sgi/video/Vgeneric.py delete mode 100755 Demo/sgi/video/Viewer.py delete mode 100755 Demo/sgi/video/Vinfo.py delete mode 100755 Demo/sgi/video/Vmkjpeg.py delete mode 100755 Demo/sgi/video/Vplay.py delete mode 100755 Demo/sgi/video/Vrec.py delete mode 100755 Demo/sgi/video/Vrecb.py delete mode 100755 Demo/sgi/video/Vreceive.py delete mode 100755 Demo/sgi/video/Vsend.py delete mode 100755 Demo/sgi/video/Vstat.py delete mode 100755 Demo/sgi/video/Vtime.py delete mode 100755 Demo/sgi/video/Vunjpeg.py delete mode 100755 Demo/sgi/video/aplay.py delete mode 100755 Demo/sgi/video/cmif-film.ms delete mode 100755 Demo/sgi/video/imgconv.py delete mode 100755 Demo/sgi/video/rgb2video.py delete mode 100755 Demo/sgi/video/senddefs.py delete mode 100755 Demo/sgi/video/svgrab24.c delete mode 100755 Demo/sgi/video/vcopy.py delete mode 100755 Demo/sgi/video/video.doc delete mode 100755 Demo/sgi/video/video2rgb.py delete mode 100755 Demo/sgi/video/vinfo.py delete mode 100755 Demo/sgi/video/vtime.py delete mode 100755 Demo/sgi/video/watchcursor.py diff --git a/Demo/README b/Demo/README index 5266e3b..a4ccc71 100644 --- a/Demo/README +++ b/Demo/README @@ -43,12 +43,6 @@ rpc A set of classes for building clients and servers for scripts Some useful Python scripts that I put in my bin directory. No optional built-in modules needed. -sgi Demos that only run on Silicon Graphics machines. - These require at least one of the optional built-in - modules that only make sense for the SGI, such as - 'gl', 'al', and 'sv'. Split in subdirectories - per subject. - sockets Examples for the new built-in module 'socket'. threads Demos that use the 'thread' module. (Currently these diff --git a/Demo/sgi/al/.cvsignore b/Demo/sgi/al/.cvsignore deleted file mode 100644 index 11df8b0..0000000 --- a/Demo/sgi/al/.cvsignore +++ /dev/null @@ -1 +0,0 @@ -cmpaf_form.fdc diff --git a/Demo/sgi/cd/CD.doc b/Demo/sgi/cd/CD.doc deleted file mode 100755 index 67f6a02..0000000 --- a/Demo/sgi/cd/CD.doc +++ /dev/null @@ -1,46 +0,0 @@ -Introduction. - -A number of programs have been written which access the Silicon -Graphics CD-ROM player. These programs all use the interface defined -in readcd.py (see readcd.doc for documentation). - -Specifying music stretches. - -The programs that are capable of reading music CD's all use the same -syntax to describe which part of the CD is to be read. The syntax -closely corresponds to the available methods in readcd.py. - -The music to be read is divided into stretches of music. Each stretch -must be specified as a separate argument on the command line. A -stretch can be a whole CD track, specified as a single number; or it -can be a start time and a end time. The start and end times must be -specified as a tuple, thus: ``(starttime, endtime)''. Don't forget to -quote the parenthesis to the shell. Both starttime and endtime can be -``None'', a simple number which refers to a CD track, or a tuple -consisting of either 3 or 4 elements. A starttime of ``None'' refers -to the start of the CD, an endtime of ``None'' refers to the end of -the CD. A tuple of 3 elements is an absolute time on the CD. The -three elements are (minutes, seconds, frames). A tuple of 4 elements -is a track-relative time. The four elements are (track, minutes, -seconds, frames). - -When one stretch ends at the end of a track and the following stretch -starts at the next track, there is the option of either playing or not -playing the pause between the two tracks. When either the end time of -the first stretch or the start time of the second stretch is specified -using absolute or track-relative times, the pause will not be played. -When both times are specified as simple track numbers, the pause will -be played. - -If no stretches are specified, the whole CD will be played. - -The programs. - -Currently, the following programs exist. -playcd [ stretch specification ] - Play (part of) a CD through the system loadspeaker or - headphone set. -cdaiff [ file [ stretch specification ] ] - Copy (part of) a CD to a file. The file will be written in - AIFF format. If no file is specified, cdaiff will write to - the file ``@'' in the current directory. diff --git a/Demo/sgi/cd/README b/Demo/sgi/cd/README deleted file mode 100644 index 016e4d1..0000000 --- a/Demo/sgi/cd/README +++ /dev/null @@ -1,28 +0,0 @@ -These are some programs to work with the SCSI CD-ROM player's audio -interface (see cdaudio(3) in IRIX 4.0 or higher; tested only on 4.0.2). - -See also the SGI-specific standard module 'readcd', documented as -"readcd.lib" in the library. - -cdwin.py A trivial window interface to play a CD over the CD - player's audio jack. More functionality is left as an - excersice to the reader. Needs module stdwin. - -listcd.py List the table-of-contents of a CD (data CDs will - appear as a single track). - -playcd.py Read audio data from the CD and play it over the - Indigo's built-in speker or audio jack. Needs module al. - -sendcd.py Read audio data from the CD and send it as UDP packets - over the network (to recvcd.py). - -recvcd.py Receive UDP packets containing CD audio data (from - sendcd.py) and play them over the Indigo's built-in - speaker or audio jack. Needs module al. (Doesn't - actually use module cd.) - -cdaiff.py Dump CD audio to disk in AIFF format. - -Note that to read *data* CD-ROMs you must open /dev/rdsk/dks0d4s7 or -some such special file... diff --git a/Demo/sgi/cd/cdaiff.py b/Demo/sgi/cd/cdaiff.py deleted file mode 100755 index a1b490f..0000000 --- a/Demo/sgi/cd/cdaiff.py +++ /dev/null @@ -1,33 +0,0 @@ -import sys -import readcd -import aifc -import AL -import cd - -Error = 'cdaiff.Error' - -def writeaudio(a, type, data): - a.writeframesraw(data) - -def main(): - if len(sys.argv) > 1: - a = aifc.open(sys.argv[1], 'w') - else: - a = aifc.open('@', 'w') - a.setsampwidth(AL.SAMPLE_16) - a.setnchannels(AL.STEREO) - a.setframerate(AL.RATE_44100) - r = readcd.Readcd() - for arg in sys.argv[2:]: - x = eval(arg) - try: - if len(x) <> 2: - raise Error, 'bad argument' - r.appendstretch(x[0], x[1]) - except TypeError: - r.appendtrack(x) - r.setcallback(cd.audio, writeaudio, a) - r.play() - a.close() - -main() diff --git a/Demo/sgi/cd/listcd.py b/Demo/sgi/cd/listcd.py deleted file mode 100755 index 2cfadb6..0000000 --- a/Demo/sgi/cd/listcd.py +++ /dev/null @@ -1,24 +0,0 @@ -# List track info from CD player. - -import cd - -def main(): - c = cd.open() - info = [] - while 1: - try: - info.append(c.gettrackinfo(len(info) + 1)) - except RuntimeError: - break - for i in range(len(info)): - start, total = info[i] - print 'Track', zfill(i+1), triple(start), triple(total) - -def triple((a, b, c)): - return zfill(a) + ':' + zfill(b) + ':' + zfill(c) - -def zfill(n): - s = `n` - return '0' * (2 - len(s)) + s - -main() diff --git a/Demo/sgi/cd/playcd.py b/Demo/sgi/cd/playcd.py deleted file mode 100755 index 44fa5a0..0000000 --- a/Demo/sgi/cd/playcd.py +++ /dev/null @@ -1,102 +0,0 @@ -# Play CD audio on speaker or headphones. - -callbacktypes = ['audio','pnum','index','ptime','atime','catalog','ident','control'] - -def playaudio(port, type, audio): - port.writesamps(audio) - -def prtrack(cdinfo, type, pnum): - if cdinfo.track[pnum] <> '': - print 'playing "' + cdinfo.track[pnum] + '"' - else: - print callbacktypes[type]+': '+`pnum` - -def callback(arg, type, data): - print callbacktypes[type]+': '+`data` - -def tcallback(arg, type, data): - print callbacktypes[type]+': '+triple(data) - -def triple((a, b, c)): - return zfill(a) + ':' + zfill(b) + ':' + zfill(c) - -def zfill(n): - s = `n` - return '0' * (2 - len(s)) + s - -def prtrackinfo(info): - for i in range(len(info)): - start, total = info[i] - print 'Track', zfill(i+1), triple(start), triple(total) - -statedict = ['ERROR', 'NODISK', 'READY', 'PLAYING', 'PAUSED', 'STILL'] - -def prstatus(status): - state, track, curtime, abstime, totaltime, first, last, \ - scsi_audio, cur_block, dummy = status - print 'Status:', - if 0 <= state < len(statedict): - print statedict[state] - else: - print state - print 'Track: ', track - print 'Time: ', triple(curtime) - print 'Abs: ', triple(abstime) - print 'Total: ', triple(totaltime) - print 'First: ', first - print 'Last: ', last - print 'SCSI: ', scsi_audio - print 'Block: ', cur_block - print 'Future:', dummy - -def main(): - import sys, readcd, al, AL, cd, cdplayer - verbose = 0 - r = readcd.Readcd() - prstatus(r.getstatus()) - prtrackinfo(r.gettrackinfo()) - cdinfo = cdplayer.Cdplayer(r.gettrackinfo()) - if cdinfo.title <> '': - print 'Title: "' + cdinfo.title + '"' - if cdinfo.artist <> '': - print 'Artist: ' + cdinfo.artist - for arg in sys.argv[1:]: - if arg == '-v': - verbose = 1 - continue - x = eval(arg) - try: - l = len(x) - r.appendstretch(x[0], x[1]) - except TypeError: - r.appendtrack(x) - try: - oldparams = [AL.OUTPUT_RATE, 0] - params = oldparams[:] - al.getparams(AL.DEFAULT_DEVICE, oldparams) - params[1] = AL.RATE_44100 - al.setparams(AL.DEFAULT_DEVICE, params) - config = al.newconfig() - config.setwidth(AL.SAMPLE_16) - config.setchannels(AL.STEREO) - port = al.openport('CD Player', 'w', config) - - for i in range(8): - r.setcallback(i, callback, None) - if verbose: - r.setcallback(cd.ptime, tcallback, None) - r.setcallback(cd.atime, tcallback, None) - else: - r.removecallback(cd.ptime) - r.removecallback(cd.atime) - r.setcallback(cd.pnum, prtrack, cdinfo) - r.setcallback(cd.audio, playaudio, port) - - data = r.play() - except KeyboardInterrupt: - status = r.getstatus() - print 'Interrupted at '+triple(status[2])+' into track '+ \ - `status[1]`+' (absolute time '+triple(status[3])+')' - al.setparams(AL.DEFAULT_DEVICE, oldparams) - -main() diff --git a/Demo/sgi/cd/recvcd.py b/Demo/sgi/cd/recvcd.py deleted file mode 100755 index e7496d1..0000000 --- a/Demo/sgi/cd/recvcd.py +++ /dev/null @@ -1,36 +0,0 @@ -# Receive UDP packets from sendcd.py and play them on the speaker or -# audio jack. - -import al, AL -from socket import * -from cd import DATASIZE - -PORT = 50505 # Must match the port in sendcd.py - -def main(): - s = socket(AF_INET, SOCK_DGRAM) - s.bind('', PORT) - - oldparams = [AL.OUTPUT_RATE, 0] - params = oldparams[:] - al.getparams(AL.DEFAULT_DEVICE, oldparams) - params[1] = AL.RATE_44100 - try: - al.setparams(AL.DEFAULT_DEVICE, params) - config = al.newconfig() - config.setwidth(AL.SAMPLE_16) - config.setchannels(AL.STEREO) - port = al.openport('CD Player', 'w', config) - - while 1: - data = s.recv(DATASIZE) - if not data: - print 'EOF' - break - port.writesamps(data) - except KeyboardInterrupt: - pass - - al.setparams(AL.DEFAULT_DEVICE, oldparams) - -main() diff --git a/Demo/sgi/cd/sendcd.py b/Demo/sgi/cd/sendcd.py deleted file mode 100755 index a6cf8e7..0000000 --- a/Demo/sgi/cd/sendcd.py +++ /dev/null @@ -1,154 +0,0 @@ -# Read CD audio data from the SCSI CD player and send it as UDP -# packets to "recvcd.py" on another host. -# -# Usage: python sendcd.py [options] host [track | minutes seconds [frames]] -# -# Options: -# "-l" list track info and quit. -# "-s" display status and quit. -# -# Arguments: -# host host to send the audio data to (required unless -l or -s). -# track track number where to start; alternatively, -# min sec [frames] absolute address where to start; -# default is continue at current point according to status. - -import cd -import sys -from socket import * -import getopt - -PORT = 50505 # Must match the port in readcd.py - -def main(): - try: - optlist, args = getopt.getopt(sys.argv[1:], 'ls') - except getopt.error, msg: - sys.stderr.write(msg + '\n') - sys.exit(2) - - player = cd.open() - prstatus(player) - size = player.bestreadsize() - - if optlist: - for opt, arg in optlist: - if opt == '-l': - prtrackinfo(player) - elif opt == '-s': - prstatus(player) - return - - if not args: - sys.stderr.write('usage: ' + sys.argv[0] + ' host [track]\n') - sys.exit(2) - host, args = args[0], args[1:] - - sys.stdout.write('waiting for socket... ') - sys.stdout.flush() - port = socket(AF_INET, SOCK_DGRAM) - port.connect(host, PORT) - print 'socket connected' - - parser = cd.createparser() - parser.setcallback(cd.audio, audiocallback, port) - parser.setcallback(cd.pnum, pnumcallback, player) - parser.setcallback(cd.index, indexcallback, None) - ## cd.ptime: too many calls - ## cd.atime: too many calls - parser.setcallback(cd.catalog, catalogcallback, None) - parser.setcallback(cd.ident, identcallback, None) - parser.setcallback(cd.control, controlcallback, None) - - if len(args) >= 2: - if len(args) >= 3: - [min, sec, frame] = args[:3] - else: - [min, sec] = args - frame = '0' - min, sec, frame = eval(min), eval(sec), eval(frame) - print 'Seek to', triple(min, sec, frame) - dummy = player.seek(min, sec, frame) - elif len(args) == 1: - track = eval(args[0]) - print 'Seek to track', track - dummy = player.seektrack(track) - else: - min, sec, frame = player.getstatus()[3] - print 'Try to seek back to', triple(min, sec, frame) - try: - player.seek(min, sec, frame) - except RuntimeError: - print 'Seek failed' - - try: - while 1: - frames = player.readda(size) - if frames == '': - print 'END OF CD' - break - parser.parseframe(frames) - except KeyboardInterrupt: - print '[Interrupted]' - pass - -def prtrackinfo(player): - info = [] - while 1: - try: - info.append(player.gettrackinfo(len(info) + 1)) - except RuntimeError: - break - for i in range(len(info)): - start, total = info[i] - print 'Track', zfill(i+1), triple(start), triple(total) - -def audiocallback(port, type, data): -## sys.stdout.write('#') -## sys.stdout.flush() - port.send(data) - -def pnumcallback(player, type, data): - print 'pnum =', `data` - prstatus(player) - -def indexcallback(arg, type, data): - print 'index =', `data` - -def catalogcallback(arg, type, data): - print 'catalog =', `data` - -def identcallback(arg, type, data): - print 'ident =', `data` - -def controlcallback(arg, type, data): - print 'control =', `data` - -statedict = ['ERROR', 'NODISK', 'READY', 'PLAYING', 'PAUSED', 'STILL'] - -def prstatus(player): - state, track, curtime, abstime, totaltime, first, last, \ - scsi_audio, cur_block, dummy = player.getstatus() - print 'Status:', - if 0 <= state < len(statedict): - print statedict[state] - else: - print state - print 'Track: ', track - print 'Time: ', triple(curtime) - print 'Abs: ', triple(abstime) - print 'Total: ', triple(totaltime) - print 'First: ', first - print 'Last: ', last - print 'SCSI: ', scsi_audio - print 'Block: ', cur_block - print 'Future:', dummy - -def triple((a, b, c)): - return zfill(a) + ':' + zfill(b) + ':' + zfill(c) - -def zfill(n): - s = `n` - return '0' * (2 - len(s)) + s - -main() diff --git a/Demo/sgi/flp/.cvsignore b/Demo/sgi/flp/.cvsignore deleted file mode 100644 index 4cee222..0000000 --- a/Demo/sgi/flp/.cvsignore +++ /dev/null @@ -1 +0,0 @@ -tcache.fdc test_cb.fdc test_nocb.fdc diff --git a/Demo/sgi/flp/tcache.fd b/Demo/sgi/flp/tcache.fd deleted file mode 100755 index 2ae91fa..0000000 --- a/Demo/sgi/flp/tcache.fd +++ /dev/null @@ -1,51 +0,0 @@ -Magic: 12321 - -Internal Form Definition File - (do not change) - -Number of forms: 2 - -=============== FORM =============== -Name: first -Width: 340.000000 -Height: 160.000000 -Number of Objects: 1 - --------------------- -class: 1 -type: 1 -box: 0.000000 0.000000 340.000000 160.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 10.000000 -lcol: 0 -label: -name: -callback: -argument: - -=============== FORM =============== -Name: second -Width: 150.000000 -Height: 400.000000 -Number of Objects: 1 - --------------------- -class: 1 -type: 1 -box: 0.000000 0.000000 150.000000 400.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 10.000000 -lcol: 0 -label: -name: -callback: -argument: - -============================== -create_the_forms diff --git a/Demo/sgi/flp/tcache.py b/Demo/sgi/flp/tcache.py deleted file mode 100755 index cf713fc..0000000 --- a/Demo/sgi/flp/tcache.py +++ /dev/null @@ -1,32 +0,0 @@ -# Test bug in caching of forms - -import sys -import os -import flp - -filename = 'tcache.fd' -cachename = filename + 's' - -def first(): - try: - os.unlink(cachename) - except os.error: - pass - first = flp.parse_form(filename, 'first') - -def second(): - forms = flp.parse_forms(filename) - k = forms.keys() - if 'first' in k and 'second' in k: - print 'OK' - else: - print 'BAD!', k - -def main(): - if sys.argv[1:]: - second() - else: - first() - print 'Now run the script again with an argument' - -main() diff --git a/Demo/sgi/flp/test_cb.fd b/Demo/sgi/flp/test_cb.fd deleted file mode 100755 index e83fd1f..0000000 --- a/Demo/sgi/flp/test_cb.fd +++ /dev/null @@ -1,75 +0,0 @@ -Magic: 12321 - -Internal Form Definition File - (do not change) - -Number of forms: 1 - -=============== FORM =============== -Name: main_form -Width: 170.000000 -Height: 190.000000 -Number of Objects: 4 - --------------------- -class: 1 -type: 1 -box: 0.000000 0.000000 170.000000 190.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 11 -type: 0 -box: 10.000000 140.000000 150.000000 40.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Button 1 -name: button1 -callback: button1CB -argument: 0 - --------------------- -class: 11 -type: 0 -box: 10.000000 100.000000 150.000000 40.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Button 2 -name: button2 -callback: button2CB -argument: 0 - --------------------- -class: 11 -type: 6 -box: 10.000000 10.000000 150.000000 40.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: EXIT -name: exitbutton -callback: exitbuttonCB -argument: 0 - -============================== -create_the_forms diff --git a/Demo/sgi/flp/test_cb.py b/Demo/sgi/flp/test_cb.py deleted file mode 100755 index 4163503..0000000 --- a/Demo/sgi/flp/test_cb.py +++ /dev/null @@ -1,61 +0,0 @@ -# -# Example 2 - Using fl in python with callbacks. -# -# The form is named 'main_form' and resides on file 'test_cb.fd'. -# It has three objects named button1, button2 and exitbutton. -# All buttons have callbacks with the same names as their corresponding -# buttons but with CB appended. -# -import fl # The forms library -import FL # Symbolic constants for the above -import flp # The module to parse .fd files -import sys - -# The following struct is created to hold the instance variables -# main_form, button1, button2 and exitbutton. - -class myform: - # - # The constructor parses and creates the form, but doesn't - # display it (yet). - def __init__(self, number): - # - # First we parse the form - parsetree = flp.parse_form('test_cb', 'main_form') - # - # Next we create it - - flp.create_full_form(self, parsetree) - - # And keep our number - self.number = number - - # - # The show function displays the form. It doesn't do any interaction, - # though. - def show(self): - self.main_form.show_form(FL.PLACE_SIZE, 1, '') - - # The callback functions - def button1CB(self, obj, arg): - print 'Button 1 pressed on form', self.number - - def button2CB(self, obj, arg): - print 'Button 2 pressed on form', self.number - - def exitbuttonCB(self, obj, arg): - print 'Ok, bye bye' - sys.exit(0) - -# -# The main program. Instantiate two variables of the forms class -# and interact with them. - -form1 = myform(1) -form2 = myform(2) - -form1.show() -form2.show() - -obj = fl.do_forms() -print 'do_forms() returned. This should not happen. obj=', obj diff --git a/Demo/sgi/flp/test_nocb.fd b/Demo/sgi/flp/test_nocb.fd deleted file mode 100755 index 4d3f7ef..0000000 --- a/Demo/sgi/flp/test_nocb.fd +++ /dev/null @@ -1,75 +0,0 @@ -Magic: 12321 - -Internal Form Definition File - (do not change) - -Number of forms: 1 - -=============== FORM =============== -Name: main_form -Width: 170.000000 -Height: 190.000000 -Number of Objects: 4 - --------------------- -class: 1 -type: 1 -box: 0.000000 0.000000 170.000000 190.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 11 -type: 0 -box: 10.000000 140.000000 150.000000 40.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Button 1 -name: button1 -callback: -argument: - --------------------- -class: 11 -type: 0 -box: 10.000000 100.000000 150.000000 40.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Button 2 -name: button2 -callback: -argument: - --------------------- -class: 11 -type: 6 -box: 10.000000 10.000000 150.000000 40.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: EXIT -name: exitbutton -callback: -argument: - -============================== -create_the_forms diff --git a/Demo/sgi/flp/test_nocb.py b/Demo/sgi/flp/test_nocb.py deleted file mode 100755 index 6346da3..0000000 --- a/Demo/sgi/flp/test_nocb.py +++ /dev/null @@ -1,45 +0,0 @@ -# -# Example 1 - Using fl in python without callbacks. -# -# The form is named 'main_form' and resides on file 'test_nocb.fd'. -# It has three objects named button1, button2 and exitbutton. -# -import fl # The forms library -import FL # Symbolic constants for the above -import flp # The module to parse .fd files -import sys - -# The following struct is created to hold the instance variables -# main_form, button1, button2 and exitbutton. - -class struct: pass -container = struct() - -# -# We now first parse the forms file - -parsetree = flp.parse_form('test_nocb', 'main_form') - -# -# Next we create it - -flp.create_full_form(container, parsetree) - -# -# And display it - -container.main_form.show_form(FL.PLACE_MOUSE, 1, '') - -# -# And interact until the exit button is pressed -while 1: - selected_obj = fl.do_forms() - if selected_obj == container.button1: - print 'Button 1 selected' - elif selected_obj == container.button2: - print 'Button 2 selected' - elif selected_obj == container.exitbutton: - print 'Ok, bye bye' - sys.exit(0) - else: - print 'do_forms() returned unknown object ', selected_obj diff --git a/Demo/sgi/gl/README b/Demo/sgi/gl/README deleted file mode 100644 index a89a502..0000000 --- a/Demo/sgi/gl/README +++ /dev/null @@ -1,35 +0,0 @@ -These demos run only on SGI machines and require the 'gl' built-in module. -The demonstrate the abilities of SGI's GL library as well as the ease of -GL programming in Python. Most demos require the Z-buffer (aka -24-bitplane) option. Press ESC to get out of any of them. - -backface.py Demonstrates the 'backface' GL function. - -kites.py Show 3 flying kites. Demonstrates the rendering speed - obtainable by Python programs. - -kunst.py Cute demo showing a ball suspended on four cables in - the central room of the CWI building. You can specify - three functions Fx(t), Fy(t), Fz(t) which define the - movement of the ball. Try something like sin(t), - cos(t), sin(2*t). - -mclock.py A colorful clock with more options than you can - remember. Works on 8-bit machines, but allows more - colors on 24-bit machines. See mclock.doc for more - info. - -mixing.py Demonstrates the effect of color mixing: through - frequent color switching it gives the effect of white - light. - -nurbs.py A simple demonstration of the 'nurbs' GL functions. - Press left mouse button to toggle surface trimming. - -zrgb.py Displays a 3-D Gouraud-shaded figure which can be moved - around with the mouse. - -glstdwin/ This is quite different: a partial STDWIN emulation - using GL! Requires only small changes to Python - programs that use STDWIN. Some features not yet - implemented, e.g., scroll bars. diff --git a/Demo/sgi/gl/backface.py b/Demo/sgi/gl/backface.py deleted file mode 100755 index 41c69d6..0000000 --- a/Demo/sgi/gl/backface.py +++ /dev/null @@ -1,140 +0,0 @@ -#! /usr/bin/env python - -# backface -# -# draw a cube that can run with backface() turned on or off. -# cube is moved when LEFTMOUSE is pressed and mouse itself is moved. - -from gl import * -from DEVICE import * -from GL import * - -CUBE_SIZE = 200.0 -CUBE_OBJ = 1 - -def main () : - # - x = 0 - y = 0 - moveit = 0 - # - initialize() - # - while (1) : - # - while (qtest()) : - dev, val = qread() - # - if dev == ESCKEY : - backface(0) - return - # - elif dev == REDRAW : - reshapeviewport() - drawcube(x,y) - # - elif dev == LEFTMOUSE : - # - # LEFTMOUSE down - moveit = val - # - elif dev == BKEY : - backface(1) - drawcube(x,y) - # - elif dev == FKEY : - backface(0) - drawcube(x,y) - # - if moveit : - x = getvaluator(MOUSEX) - y = getvaluator(MOUSEY) - drawcube(x,y) - - -def initialize () : - foreground () - keepaspect (1, 1) - gid = winopen('backface') - winset(gid) - winconstraints() - # - doublebuffer() - gconfig() - shademodel(FLAT) - # - ortho(-1024.0, 1024.0, -1024.0, 1024.0, -1024.0, 1024.0) - # - qdevice(ESCKEY) - qdevice(REDRAW) - qdevice(LEFTMOUSE) - qdevice(BKEY) - qdevice(FKEY) - qenter(REDRAW,gid) - # - backface(1) - -# -# define a cube -def cube () : - # - # front face - pushmatrix() - translate(0.0,0.0,CUBE_SIZE) - color(RED) - rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE) - popmatrix() - # - # right face - pushmatrix() - translate(CUBE_SIZE, 0.0, 0.0) - rotate(900, 'y') - color(GREEN) - rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE) - popmatrix() - # - # back face - pushmatrix() - translate(0.0, 0.0, -CUBE_SIZE) - rotate(1800, 'y') - color(BLUE) - rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE) - popmatrix() - # - # left face - pushmatrix() - translate(-CUBE_SIZE, 0.0, 0.0) - rotate(-900, 'y') - color(CYAN) - rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE) - popmatrix() - # - # top face - pushmatrix() - translate(0.0, CUBE_SIZE, 0.0) - rotate(-900, 'x') - color(MAGENTA) - rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE) - popmatrix() - # - # bottom face - pushmatrix() - translate(0.0, -CUBE_SIZE, 0.0) - rotate(900, 'x') - color(YELLOW) - rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE) - popmatrix() - -def drawcube(x,y) : - # - pushmatrix() - rotate(2*x, 'x') - rotate(2*y, 'y') - color(BLACK) - clear() - cube() - popmatrix() - swapbuffers() - - -main () diff --git a/Demo/sgi/gl/glinfo.py b/Demo/sgi/gl/glinfo.py deleted file mode 100755 index dae99f1..0000000 --- a/Demo/sgi/gl/glinfo.py +++ /dev/null @@ -1,20 +0,0 @@ -#! /usr/bin/env python - -# Print the values of all values that can be inquired with getgdesc(). -# See man getgdesc() for a description. - -import gl -import GL - -def main(): - names = [] - maxlen = 0 - for name in dir(GL): - if name[:3] == 'GD_': - names.append(name) - maxlen = max(maxlen, len(name)) - for name in names: - print name + (maxlen - len(name))*' ' + '=', - print gl.getgdesc(getattr(GL, name)) - -main() diff --git a/Demo/sgi/gl/kites.py b/Demo/sgi/gl/kites.py deleted file mode 100755 index cde69cb..0000000 --- a/Demo/sgi/gl/kites.py +++ /dev/null @@ -1,194 +0,0 @@ -#! /usr/bin/env python - -# *** This only works correctly on a 24 bit-plane machine. *** -# -# A simple Python program that tests the some parts of the -# GL library. It shows the speed that can be obtained when -# doing simple graphics. -# -# The bottleneck in this program is NOT Python but the graphics -# engine; i.e Python can feed the graphics pipeline fast enough -# on the 4D/25G. -# -# This program show 3 kites flying around the screen. It uses -# -# * bgnpolygon, endpolygon -# * v3, n3 -# * lmdef, lmbind -# -# Usage : -# -# ESC -> exit program -# MOUSE3 -> freeze toggle -# MOUSE2 -> one step (use this in freeze state) - -from GL import * -from gl import * -import DEVICE -from math import * - -# -# viewobj : sets the rotation, translation and scaling -# set appropiate material, call drawobject() -# -def viewobj (r, s, t, mat) : - pushmatrix() - rot (r * 10.0, 'X') - rot (r * 10.0, 'Y') - rot (r * 10.0, 'Z') - scale (s[0], s[1], s[2]) - translate (t[0], t[1], t[2]) - lmbind(MATERIAL, mat) - drawobject() - popmatrix() - -# -# makeobj : the constructor of the object -# -def mkobj () : - v0 = (-5.0 ,0.0, 0.0) - v1 = (0.0 ,5.0, 0.0) - v2 = (5.0 ,0.0, 0.0) - v3 = (0.0 ,2.0, 0.0) - n0 = (sqrt(2.0)/2.0, sqrt(2.0)/2.0, 0.0) - vn = ((v0, n0), (v1, n0), (v2, n0), (v3, n0)) - # - return vn - -# -# the object itself as an array of vertices and normals -# -kite = mkobj () - -# -# drawobject : draw a triangle. with bgnpolygon -# -def drawobject () : - # - bgnpolygon() - vnarray (kite) - endpolygon() - -# -# identity matrix -# -idmat=[1.0,0.0,0.0,0.0,0.0,1.0,0.0,0.0,0.0,0.0,1.0,0.0,0.0,0.0,0.0,1.0] - -# -# the rgb-value of light-blue -# -LightBlue = (43,169,255) - -# -# the different materials. -# -m1=[SPECULAR,0.0,0.0,0.6,DIFFUSE,0.0,0.0,0.8,SHININESS,20.0,LMNULL] -m2=[SPECULAR,0.8,0.0,0.1,DIFFUSE,0.8,0.0,0.3,SHININESS,120.0,LMNULL] -m3=[SPECULAR,0.0,1.0,0.0,DIFFUSE,0.0,0.6,0.0,SHININESS,120.0,LMNULL] - -# -# lightsources -# -light1 = [LCOLOR,1.0,1.0,1.0,POSITION,15.0,15.0,0.0,1.0,LMNULL] -light2 = [LCOLOR,1.0,1.0,1.0,POSITION,-15.0,15.0,0.0,1.0,LMNULL] - -# -# the lightmodel -# -model = [AMBIENT,0.2,0.2,0.2,LMNULL] - -# -# initgl : opens the window, configures the pipeline to 2buf and zbuf, -# sets the viewing, defines and binds the materials -# -def initgl () : - # - # open window - # - foreground () - keepaspect (1, 1) - prefposition (100, 500, 100, 500) - w = winopen ('PYTHON lights') - keepaspect (1, 1) - winconstraints() - # - # configure pipeline (zbuf, 2buf, GOURAUD and RGBmode) - # - zbuffer (1) - doublebuffer () - shademodel (GOURAUD) - RGBmode () - gconfig () - # - # define and bind materials (set perspective BEFORE loadmat !) - # - mmode(MVIEWING) - perspective (900, 1.0, 1.0, 20.0) - loadmatrix(idmat) - lmdef(DEFMATERIAL, 1, m1) - lmdef(DEFMATERIAL, 2, m2) - lmdef(DEFMATERIAL, 3, m3) - lmdef(DEFLIGHT, 1, light1) - lmdef(DEFLIGHT, 2, light2) - lmdef(DEFLMODEL, 1, model) - lmbind(LIGHT0,1) - lmbind(LIGHT1,2) - lmbind(LMODEL,1) - # - # set viewing - # - lookat (0.0, 0.0, 10.0, 0.0, 0.0, 0.0, 0) - # - # ask for the REDRAW and ESCKEY events - # - qdevice(DEVICE.MOUSE3) - qdevice(DEVICE.MOUSE2) - qdevice(DEVICE.REDRAW) - qdevice(DEVICE.ESCKEY) - -# -# GoForIT : use 2buf to redraw the object 2n times. index i is used as -# the (smoothly changing) rotation angle -# -def GoForIt(i) : - freeze = 1 - while 1 : - if freeze <> 0 : - i = i + 1 - # - # clear z-buffer and clear background to light-blue - # - zclear() - c3i (LightBlue) - clear() - # - # draw the 3 traiangles scaled above each other. - # - viewobj(float(i),[1.0,1.0,1.0],[1.0,1.0,1.0],1) - viewobj(float(i),[0.75,0.75,0.75],[0.0,2.0,2.0],2) - viewobj(float(i),[0.5,0.5,0.5],[0.0,4.0,4.0],3) - # - swapbuffers() - # - if qtest() <> 0 : - dev, val = qread() - if dev == DEVICE.ESCKEY : - break - elif dev == DEVICE.REDRAW : - reshapeviewport () - elif dev == DEVICE.MOUSE3 and val <> 0 : - freeze = 1 - freeze - elif dev == DEVICE.MOUSE2 and val <> 0 : - i = i + 1 - - -# the main program -# -def main () : - initgl () - GoForIt (0) - -# -# exec main -# -main () diff --git a/Demo/sgi/gl/kunst.py b/Demo/sgi/gl/kunst.py deleted file mode 100755 index f37f979..0000000 --- a/Demo/sgi/gl/kunst.py +++ /dev/null @@ -1,426 +0,0 @@ -#! /usr/bin/env python -# Simulate the artwork in the hall. -# Jack Jansen, Feb 91. - -from gl import * -from GL import * -from math import * -from DEVICE import * -import sys -import __main__ -main_dict = __main__.__dict__ - -SPOTDIRECTION = 103 -SPOTLIGHT = 104 - -# -# Make a cylinder paralel with the Z axis with center (X,Y,0) -# and radius 1 -def mkcyl(nslice, nparts, docircle): - cyl = [] - step = 2.0 / float(nslice) - z = -1.0 - for i in range(nslice): - cyl.append(mkslice(z, z+step, nparts, docircle)) - z = z + step - return drawcylinder(cyl) -# -# Make one part of a cylinder -# -def mkslice(z1, z2, nparts, docircle): - if docircle: - w1 = z1 - w2 = z2 - w1 = sqrt(1.0-w1*w1) - w2 = sqrt(1.0-w2*w2) - normalz = 1.0 - else: - w1 = 1.0 - w2 = 1.0 - normalz = 0.0 - slice = [] - step = (2.0*pi)/float(nparts) - angle = 0.0 - for i in range(nparts+1): - vx = cos(angle) - vy = sin(angle) - slice.append( ((vx*w1,vy*w1,z1), (vx*w1, vy*w1, z1*normalz)) ) - slice.append( ((vx*w2,vy*w2,z2), (vx*w2, vy*w2, z2*normalz)) ) - angle = angle + step - return slice -# -# Drawcylinder : draw the cylinder -# -class struct: pass -curobj = struct() -curobj.curobj = 1 -def drawcylinder(cyl): - obj = curobj.curobj - curobj.curobj = curobj.curobj+1 - makeobj(obj) - for slice in cyl: - bgntmesh() - vnarray(slice) - endtmesh() - closeobj() - return obj -# -def drawnormals(cyl): - for slice in cyl: - for triang in slice: - bgnline() - v3f(triang[0]) - v3f(triang[0][0] + triang[1][0], triang[0][1] + triang[1][1], triang[0][2] + triang[1][2]) - endline() -def drawfloors(): - obj = curobj.curobj - curobj.curobj = curobj.curobj+1 - makeobj(obj) - bgnpolygon() - v3i(4,6,-6) - v3i(-6,6,-6) - v3i(-6,-6,-6) - v3i(4,-6,-6) - endpolygon() - for floor in range(3): - pos = -1 + 5*floor - bgnpolygon() - v3i(4,4,pos) - v3i(-6,4,pos) - v3i(-6,6,pos) - v3i(4,6,pos) - endpolygon() - bgnpolygon() - v3i(-4,4,pos) - v3i(-4,-4,pos) - v3i(-6,-4,pos) - v3i(-6,4,pos) - endpolygon() - bgnpolygon() - v3i(-6,-4,pos) - v3i(-6,-6,pos) - v3i(4,-6,pos) - v3i(4,-4,pos) - endpolygon() - closeobj() - return obj -def drawdoors(): - obj = curobj.curobj - curobj.curobj = curobj.curobj+1 - makeobj(obj) - for floor in range(3): - pos = -1+5*floor - bgnpolygon() - v3i(-2,6,pos) - v3i(-2,6,pos+3) - v3i(0,6,pos+3) - v3i(0,6,pos) - endpolygon() - closeobj() - return obj -def drawrailing(): - obj = curobj.curobj - curobj.curobj = curobj.curobj+1 - makeobj(obj) - for floor in range(3): - pos = -1 + 5*floor - bgnpolygon() - v3i(4,4,pos) - v3i(4,4,pos-1) - v3i(-4,4,pos-1) - v3i(-4,4,pos) - endpolygon() - bgnpolygon() - v3i(-4,4,pos) - v3i(-4,4,pos-1) - v3i(-4,-4,pos-1) - v3i(-4,-4,pos) - endpolygon() - bgnpolygon() - v3i(-4,-4,pos) - v3i(-4,-4,pos-1) - v3i(4,-4,pos-1) - v3i(4,-4,pos) - endpolygon() - closeobj() - return obj -def drawwalls(): - obj = curobj.curobj - curobj.curobj = curobj.curobj+1 - makeobj(obj) - bgnpolygon() - v3i(4,6,-6) - v3i(4,6,18) - v3i(-6,6,18) - v3i(-6,6,-6) - endpolygon() - bgnpolygon() - v3i(-6,6,-6) - v3i(-6,6,18) - v3i(-6,-6,18) - v3i(-6,-6,-6) - endpolygon() - bgnpolygon() - v3i(-6,-6,-6) - v3i(-6,-6,18) - v3i(4,-6,18) - v3i(4,-6,-6) - endpolygon() - bgnpolygon() - v3i(4,-6,-6) - v3i(4,-6,18) - v3i(4,4,18) - v3i(4,4,-6) - endpolygon() - closeobj() - return obj -def axis(): - bgnline() - cpack(0xff0000) - v3i(-1,0,0) - v3i(1,0,0) - v3f(1.0, 0.1, 0.1) - endline() - bgnline() - cpack(0xff00) - v3i(0,-1,0) - v3i(0,1,0) - v3f(0.1, 1.0, 0.1) - endline() - bgnline() - cpack(0xff) - v3i(0,0,-1) - v3i(0,0,1) - v3f(0.1,0.1,1.0) - endline() -# -green_velvet = [ DIFFUSE, 0.05, 0.4, 0.05, LMNULL] -silver = [ DIFFUSE, 0.3, 0.3, 0.3, SPECULAR, 0.9, 0.9, 0.95, \ - SHININESS, 40.0, LMNULL] -floormat = [ AMBIENT, 0.5, 0.25, 0.15, DIFFUSE, 0.5, 0.25, 0.15, SPECULAR, 0.6, 0.3, 0.2, SHININESS, 20.0, LMNULL] -wallmat = [ DIFFUSE, 0.4, 0.2, 0.1, AMBIENT, 0.4, 0.20, 0.10, SPECULAR, 0.0, 0.0, 0.0, SHININESS, 20.0, LMNULL] -offwhite = [ DIFFUSE, 0.8, 0.8, 0.6, AMBIENT, 0.8, 0.8, 0.6, SPECULAR, 0.9, 0.9, 0.9, SHININESS, 30.0, LMNULL] -doormat = [ DIFFUSE, 0.1, 0.2, 0.5, AMBIENT, 0.2, 0.4, 1.0, SPECULAR, 0.2, 0.4, 1.0, SHININESS, 60.0, LMNULL] - -toplight = [ LCOLOR, 1.0, 1.0, 0.5, \ - POSITION, 0.0, 0.0, 11.0, 1.0, LMNULL] -floor1light = [ LCOLOR, 1.0, 1.0, 1.0, POSITION, 3.9, -3.9, 0.0, 1.0, \ - SPOTDIRECTION, 1.0, 1.0, 0.0, SPOTLIGHT, 10.0, 90.0, LMNULL] - -lmodel = [ AMBIENT, 0.92, 0.8, 0.5, LOCALVIEWER, 1.0, LMNULL] -# -def lighting(): - lmdef(DEFMATERIAL, 1, green_velvet) - lmdef(DEFMATERIAL, 2, silver) - lmdef(DEFMATERIAL, 3, floormat) - lmdef(DEFMATERIAL, 4, wallmat) - lmdef(DEFMATERIAL, 5, offwhite) - lmdef(DEFMATERIAL, 6, doormat) - lmdef(DEFLIGHT, 1, toplight) - lmdef(DEFLIGHT, 2, floor1light) - lmdef(DEFLMODEL, 1, lmodel) - lmbind(MATERIAL, 1) - lmbind(LIGHT0, 1) - lmbind(LIGHT1, 2) - lmbind(LMODEL, 1) -IdMat=[1.0,0.0,0.0,0.0, 0.0,1.0,0.0,0.0, 0.0,0.0,1.0,0.0, 0.0,0.0,0.0,1.0] -# -def defun(axis): - done = 0 - while not done: - print 'F'+axis+'(t) = ', - s = sys.stdin.readline(100) - print - try: - s = 'def f'+axis+'(t): return '+s - exec(s, main_dict) - done = 1 - except RuntimeError: - print 'Sorry, there is a syntax error in your expression' -def getfunctions(): - print 'Welcome to the CWI art simulator. You can now enter X, Y and Z' - print 'coordinates as a function of t.' - print 'Normal trig functions are available. Please use floating point' - print 'values only (so 0.0 for 0). Comments to jack@cwi.nl' - defun('x') - defun('y') - defun('z') - print 'Ok, here you go. Use mouse+right button to move up/down,' - print 'mouse+middle to speed up/slow down time. type ESC to quit simulation' -def main(): - getfunctions() - foreground() - prefposition(100,600,100,600) - void = winopen('cyl') - qdevice(ESCKEY) - qdevice(MOUSE1) - qdevice(MOUSE2) - qdevice(PKEY) - RGBmode() - doublebuffer() - gconfig() - zbuffer(1) - mmode(MVIEWING) - perspective(400, 1.0, 1.0, 20.0) - loadmatrix(IdMat) - vx = 0.0 - vy = -6.0 - vz = 0.0 - lookat(0.0, -6.0, 0.0, 0.0, 0.0, 0.0, 0) - lighting() - t = -1.0 - step = 1.0 - bol = mkcyl(12,24, 1) - cable = mkcyl(1, 6, 0) - floors = drawfloors() - walls = drawwalls() - pillar = mkcyl(1,4,0) - railing = drawrailing() - doors = drawdoors() - shademodel(GOURAUD) - mousing = -1 - pausing = 0 - while 1: - # - # Check for some user input - # - if qtest(): - dev, value = qread() - if dev == PKEY and value == 1: - pausing = 1 - if dev == ESCKEY: - break - elif (dev==MOUSE1 or dev==MOUSE2) and value == 1: - if mousing > 0: - vx = 0.0 - vy = -6.0 - vz = 0.0 - mousing = dev - oldx = getvaluator(MOUSEX) - oldy = getvaluator(MOUSEY) - elif (dev==MOUSE1 or dev==MOUSE2): - mousing = -1 - if mousing >= 0: - newx = getvaluator(MOUSEX) - newy = getvaluator(MOUSEY) - if newy <> oldy and mousing==MOUSE1: - vz = vz + float(newy - oldy)/100.0 - dist = sqrt(vx*vx + vy*vy + vz*vz) - perspective(400, 1.0, 1.0, dist+16.0) - loadmatrix(IdMat) - if vz < 0.0: - lookat(vx, vy, vz, 0.0, 0.0, 0.0, 1800) - else: - lookat(vx, vy, vz, 0.0, 0.0, 0.0, 0) - if newy <> oldy and mousing==MOUSE2: - step = step * exp(float(newy-oldy)/400.0) - if getbutton(CTRLKEY) == 0: - t = t + step - else: - t = t - step - if getbutton(LEFTSHIFTKEY) == 0: - shademodel(GOURAUD) - else: - shademodel(FLAT) - # - # Draw background and axis - cpack(0x105090) - clear() - zclear() - cpack(0x905010) - axis() - # - # Draw object - # - bolx = fx(t) - boly = fy(t) - bolz = fz(t) - err = '' - if bolx < -4.0 or bolx > 4.0: - err = 'X('+`bolx`+') out of range [-4,4]' - if boly < -4.0 or boly > 4.0: - err = 'Y('+`boly`+') out of range [-4,4]' - if bolz < -4.0 or bolz > 8.0: - err = 'Z('+`bolz`+') out of range [-4,8]' - if not err: - pushmatrix() - translate(bolx, boly, bolz) - scale(0.3, 0.3, 0.3) - lmbind(MATERIAL, 2) - callobj(bol) - popmatrix() - # - # Draw the cables - # - bolz = bolz + 0.3 - pushmatrix() - linesmooth(SML_ON) - bgnline() - v3i(-4,-4,9) - v3f(bolx, boly, bolz) - endline() - bgnline() - v3i(-4,4,9) - v3f(bolx, boly, bolz) - endline() - bgnline() - v3i(4,-4,9) - v3f(bolx, boly, bolz) - endline() - bgnline() - v3i(4,4,9) - v3f(bolx, boly, bolz) - endline() - popmatrix() - # - # draw the floors - # - lmbind(MATERIAL, 3) - callobj(floors) - lmbind(MATERIAL, 4) - callobj(walls) - lmbind(MATERIAL, 5) - pushmatrix() - translate(-4.5,4.5,3.0) - scale(0.2,0.2,9.0) - rotate(450,'z') - callobj(pillar) - popmatrix() - callobj(railing) - lmbind(MATERIAL, 6) - pushmatrix() - translate(0.0, -0.01, 0.0) - callobj(doors) - popmatrix() - if mousing == MOUSE2 or err: - cpack(0xff0000) - cmov(0.0, 0.0, 0.4) - charstr('t='+`t`) - if mousing == MOUSE2: - cpack(0xff0000) - cmov(0.0, 0.0, 0.2) - charstr('delta-t='+`step`) - if err: - cpack(0xff00) - cmov(0.0, 0.0, 0.2) - print err - charstr(err) - pausing = 1 - if pausing: - cpack(0xff00) - cmov(0.0, 0.0, 0.0) - charstr('Pausing, type P to continue') - swapbuffers() - if pausing: - while 1: - dv=qread() - if dv==(PKEY,1): - break - if dv==(ESCKEY,1): - sys.exit(0) - pausing = 0 -# -try: - main() -except KeyboardInterrupt: - sys.exit(1) diff --git a/Demo/sgi/gl/mclock.doc b/Demo/sgi/gl/mclock.doc deleted file mode 100755 index 2208f33..0000000 --- a/Demo/sgi/gl/mclock.doc +++ /dev/null @@ -1,60 +0,0 @@ -Newsgroups: cwi.sgi -Subject: Re: new clock -Distribution: cwi.sgi -References: <2246@charon.cwi.nl> - -Last week I wrote: - ->For your enjoyment I have implemented a colorful clock. - -The clock has now been extended with some new facilities: a menu, an -alarm and a gong. These may require some explanation beyond what's in -the usage message. - -Menu ----- -The right mouse button now pops up a menu that allows you to turn the -seconds hand on or off and to switch the alarm off. - -Alarm ------ - -The left and middle buttons set the alarm. When it is on, the alarm -time is displayed as a time on a 24 hour clock in the bottom left -corner. It is also indicated by two red triangles, corresponding to the -little (hours) and big (minutes) hand. These hands can be moved around: -the left mouse button moves the minutes hand, the middle button moves -the hourds hand. Watch out for differences of twelve hours (always -check the digital display); these can be corrected by dragging the hours -hand once around the dial. - -When the alarm goes off, two things happen: a shell command specified on -the command line with the -a option is executed (in the background), and -the clock's colors change every two seconds, for five minutes. You can -also turn the alarm off by using the menu accessible through the right -mouse button. - -There is no default command for the -a option; if it is not specified, -only the changing of the colors happens. If you have an 8 ohm speaker -connected to the audio output of your Personal Iris, a suitable command -would be: - - mclock -a '/ufs/guido/bin/sgi/play /ufs/guido/lib/sounds/alarm' - -Gong ----- - -Some people like a clock that makes noises every hour, or even more -often. This is supported by the -g and -G options. With -g you specify -a shell command to be executed to sound the gong; with -G you can -specify the interval between gong calls, in seconds (default is one hour). -The shell command is executed in the background. It is given two -arguments: the hours (on a 24 hour clock!) and the minutes. The -executable Python script /ufs/guido/bin/sgi/chime is a suitable example. -Again, this only works if you have installed a speaker (I bet 8 ohm -speakers are going to be in demand!) - --- -Guido van Rossum, Centre for Mathematics and Computer Science (CWI), Amsterdam -guido@cwi.nl or ..!hp4nl!cwi.nl!guido or guido%cwi.nl@uunet.uu.net -"A thing of beauty is a joy till sunrise" diff --git a/Demo/sgi/gl/mclock.py b/Demo/sgi/gl/mclock.py deleted file mode 100755 index 6af01ba..0000000 --- a/Demo/sgi/gl/mclock.py +++ /dev/null @@ -1,736 +0,0 @@ -#! /usr/bin/env python - -# "M Clock" -# -# An implementation in software of an original design by Rob Juda. -# Clock implementation: Guido van Rossum. -# Alarm and Gong features: Sape Mullender. -# -# XXX TO DO: -# add arguments to specify initial window position and size -# find out local time zone difference automatically -# add a date indicator -# allow multiple alarms -# allow the menu to change more parameters - -import sys - -from gl import * -from GL import * -from DEVICE import * -import time -import getopt -import string -import os -from math import pi -import math - -FULLC = 3600 # Full circle in 1/10-ths of a degree -MIDN = 900 # Angle of the 12 o'clock position -R, G, B = 0, 1, 2 # Indices of colors in RGB list - -HOUR = 3600 # Number of seconds per hour -MINUTE = 60 # Number of seconds per minute - -class struct: pass # Class to define featureless structures -Gl = struct() # Object to hold writable global variables - -# Default constants (used in multiple places) - -SCREENBG = 127, 156, 191 -NPARTS = 9 -TITLE = 'M Clock' - -# Set timezone, check for daylight saving time -TZDIFF = time.timezone -if time.localtime(time.time())[-1]: - TZDIFF = time.altzone - -# Default parameters - -Gl.foreground = 0 # If set, run in the foreground -Gl.fullscreen = 0 # If set, run on full screen -Gl.tzdiff = TZDIFF # Seconds west of Greenwich (winter time) -Gl.nparts = NPARTS # Number of parts each circle is divided in (>= 2) -Gl.debug = 0 # If set, print debug output -Gl.doublebuffer = 1 # If set, use double buffering -Gl.update = 0 # Update interval; seconds hand is suppressed if > 1 -Gl.colorsubset = 0 # If set, display only a subset of the colors -Gl.cyan = 0 # If set, display cyan overlay (big hand) -Gl.magenta = 0 # If set, display magenta overlay (little hand) -Gl.yellow = 0 # If set, display yellow overlay (fixed background) -Gl.black = 0 # If set, display black overlay (hands) -Gl.colormap = 0 # If set, use colormap mode instead of RGB mode -Gl.warnings = 0 # If set, print warnings -Gl.title = '' # Window title (default set later) -Gl.name = 'mclock' # Window title for resources -Gl.border = 1 # If set, use a window border (and title) -Gl.bg = 0, 0, 0 # Background color R, G, B value -Gl.iconic = 0 # Set in iconic state -Gl.fg = 255, 0, 0 # Alarm background RGB (either normal or alarm) -Gl.ox,Gl.oy = 0,0 # Window origin -Gl.cx,Gl.cy = 0,0 # Window size -Gl.alarm_set = 0 # Alarm on or off -Gl.alarm_on = 0 # Alarm is ringing -Gl.alarm_time = 0 # Alarm time in seconds after midnight -Gl.alarm_hours = 0 # Alarm hour setting, 24 hour clock -Gl.alarm_minutes = 0 # Alarm minutes setting -Gl.alarm_rgb = 0,0,0 # Alarm display RGB colors -Gl.alarm_cmd = '' # Command to execute when alarm goes off -Gl.mouse2down = 0 # Mouse button state -Gl.mouse3down = 0 # Mouse button state -Gl.gong_cmd = '' # Command to execute when chimes go off -Gl.gong_int = 3600 # Gong interval -Gl.indices = R, G, B # Colors (permuted when alarm is on) - -def main(): - # - sys.stdout = sys.stderr # All output is errors/warnings etc. - # - try: - args = getoptions() - except string.atoi_error, value: - usage(string.atoi_error, value) - except getopt.error, msg: - usage(getopt.error, msg) - # - if args: - realtime = 0 - hours = string.atoi(args[0]) - minutes = seconds = 0 - if args[1:]: minutes = string.atoi(args[1]) - if args[2:]: seconds = string.atoi(args[2]) - localtime = ((hours*60)+minutes)*60+seconds - else: - realtime = 1 - # - if Gl.title == '': - if realtime: - Gl.title = TITLE - else: - title = '' - for arg in args: title = title + ' ' + arg - Gl.title = title[1:] - del title - # - wid = makewindow() - Gl.ox,Gl.oy = getorigin() - Gl.cx,Gl.cy = getsize() - initmenu() - clearall() - # - if not Gl.update: - Gl.update = 60 - # - if Gl.update <= 1: - Gl.timernoise = 6 - else: - Gl.timernoise = 60 - noise(TIMER0, Gl.timernoise) - # - qdevice(WINSHUT) - qdevice(WINQUIT) - qdevice(ESCKEY) - if realtime: - qdevice(TIMER0) - qdevice(REDRAW) - qdevice(WINFREEZE) - qdevice(WINTHAW) - qdevice(MENUBUTTON) # MOUSE1 - qdevice(MOUSE3) # Left button - qdevice(MOUSE2) # Middle button - unqdevice(INPUTCHANGE) - # - lasttime = 0 - Gl.change = 1 - while 1: - if realtime: - localtime = int(time.time() - Gl.tzdiff) - if Gl.alarm_set: - if localtime%(24*HOUR) == Gl.alarm_time: - # Ring the alarm! - if Gl.debug: - print 'Rrrringg!' - Gl.alarm_on = 1 - if Gl.alarm_cmd <> '': - d = os.system(Gl.alarm_cmd+' '+`Gl.alarm_time/3600`+' '+`(Gl.alarm_time/60)%60` + ' &') - Gl.change = 1 - clearall() - if Gl.alarm_on: - if (localtime - Gl.alarm_time) % (24*HOUR) > 300: - # More than 5 minutes away from alarm - Gl.alarm_on = 0 - if Gl.debug: - print 'Alarm turned off' - Gl.change = 1 - clearall() - Gl.indices = R, G, B - else: - if localtime % 2 == 0: - # Permute color indices - Gl.indices = Gl.indices[2:] + Gl.indices[:2] - Gl.change = 1 - if Gl.gong_cmd <> '' and localtime%Gl.gong_int == 0: - d = os.system(Gl.gong_cmd+' '+`(localtime/3600)%24`+' '+`(localtime/60)%60` + ' &') - if localtime/Gl.update <> lasttime/Gl.update: - if Gl.debug: print 'new time' - Gl.change = 1 - if Gl.change: - if Gl.debug: print 'drawing' - doit(localtime) - lasttime = localtime - Gl.change = 0 - dev, data = qread() - if Gl.debug and dev <> TIMER0: - print dev, data - if dev == TIMER0: - if Gl.debug > 1: - print dev, data - elif dev == MOUSE3: - mousex = getvaluator(MOUSEX) - mousey = getvaluator(MOUSEY) - if mouseclick(3, data, mousex, mousey): - Gl.change = 1 - elif dev == MOUSE2: - mousex = getvaluator(MOUSEX) - mousey = getvaluator(MOUSEY) - if mouseclick(2, data, mousex, mousey): - Gl.change = 1 - elif dev == MOUSEX: - mousex = data - if Gl.mouse2down: - mouse2track(mousex, mousey) - if Gl.mouse3down: - mouse3track(mousex, mousey) - elif dev == MOUSEY: - mousey = data - if Gl.mouse2down: - mouse2track(mousex, mousey) - if Gl.mouse3down: - mouse3track(mousex, mousey) - elif dev == REDRAW or dev == REDRAWICONIC: - if Gl.debug: - if dev == REDRAW: print 'REDRAW' - else: print 'REDRAWICONIC' - reshapeviewport() - Gl.ox,Gl.oy = getorigin() - Gl.cx,Gl.cy = getsize() - Gl.change = 1 - clearall() - elif dev == MENUBUTTON: - if Gl.debug: print 'MENUBUTTON' - handlemenu() - elif dev == WINFREEZE: - if Gl.debug: print 'WINFREEZE' - Gl.iconic = 1 - noise(TIMER0, 60*60) # Redraw every 60 seconds only - elif dev == WINTHAW: - if Gl.debug: print 'WINTHAW' - Gl.iconic = 0 - noise(TIMER0, Gl.timernoise) - Gl.change = 1 - elif dev == ESCKEY or dev == WINSHUT or dev == WINQUIT: - if Gl.debug: print 'Exit' - sys.exit(0) - -def getoptions(): - optlist, args = getopt.getopt(sys.argv[1:], 'A:a:B:bc:dFfG:g:n:sT:t:u:wCMYK') - for optname, optarg in optlist: - if optname == '-A': - Gl.fg = eval(optarg) # Should be (r,g,b) - elif optname == '-a': - Gl.alarm_cmd = optarg - elif optname == '-B': - Gl.bg = eval(optarg) # Should be (r,g,b) - elif optname == '-b': - Gl.border = 0 - elif optname == '-c': - Gl.colormap = string.atoi(optarg) - elif optname == '-d': - Gl.debug = Gl.debug + 1 - Gl.warnings = 1 - elif optname == '-F': - Gl.foreground = 1 - elif optname == '-f': - Gl.fullscreen = 1 - elif optname == '-G': - Gl.gong_int = 60*string.atoi(optarg) - elif optname == '-g': - Gl.gong_cmd = optarg - elif optname == '-n': - Gl.nparts = string.atoi(optarg) - elif optname == '-s': - Gl.doublebuffer = 0 - elif optname == '-T': - Gl.title = Gl.name = optarg - elif optname == '-t': - Gl.tzdiff = string.atoi(optarg) - elif optname == '-u': - Gl.update = string.atoi(optarg) - elif optname == '-w': - Gl.warnings = 1 - elif optname == '-C': - Gl.cyan = Gl.colorsubset = 1 - elif optname == '-M': - Gl.magenta = Gl.colorsubset = 1 - elif optname == '-Y': - Gl.yellow = Gl.colorsubset = 1 - elif optname == '-K': - Gl.black = Gl.colorsubset = 1 - else: - print 'Unsupported option', optname - return args - -def usage(exc, msg): - if sys.argv: - progname = os.path.basename(sys.argv[0]) - else: - progname = 'mclock' - # - print progname + ':', - if exc == string.atoi_error: - print 'non-numeric argument:', - print msg - # - print 'usage:', progname, '[options] [hh [mm [ss]]]' - # - print '-A r,g,b : alarm background red,green,blue [255,0,0]' - print '-a cmd : shell command executed when alarm goes off' - print '-B r,g,b : background red,green,blue [0,0,0]' - print ' (-B SCREENBG uses the default screen background)' - print '-b : suppress window border and title' - print '-c cmapid : select explicit colormap' - print '-d : more debug output (implies -F, -w)' - print '-F : run in foreground' - print '-f : use full screen' - print '-G intrvl : interval between chimes in minutes [60]' - print '-g cmd : shell command executed when chimes go off' - print '-s : single buffer mode' - print '-w : print various warnings' - print '-n nparts : number of parts [' + `NPARTS` + ']' - print '-T title : alternate window title [\'' + TITLE + '\']' - print '-t tzdiff : time zone difference [' + `TZDIFF` + ']' - print '-u update : update interval [60]' - print '-CMYK : Cyan, Magenta, Yellow or blacK overlay only' - print 'if hh [mm [ss]] is specified, display that time statically' - print 'on machines with < 12 bitplanes, -s is forced on' - # - sys.exit(2) - -def doit(localtime): - hands = makehands(localtime) - list = makelist(hands) - render(list, hands) - -def makehands(localtime): - localtime = localtime % (12*HOUR) - seconds_hand = MIDN + FULLC - (localtime*60) % FULLC - big_hand = (MIDN + FULLC - (localtime%HOUR)) % FULLC - little_hand = (MIDN + FULLC - ((localtime/12) % HOUR)) % FULLC - return little_hand, big_hand, seconds_hand - -def makelist(hands): - little_hand, big_hand, seconds_hand = hands - total = [] - if Gl.cyan or not Gl.colorsubset: - total = total + makesublist(big_hand, Gl.indices[0]) - if Gl.magenta or not Gl.colorsubset: - total = total + makesublist(little_hand, Gl.indices[1]) - if Gl.yellow or not Gl.colorsubset: - total = total + makesublist(MIDN, Gl.indices[2]) - total.sort() - return total - -def makesublist(first, icolor): - list = [] - alpha = FULLC/Gl.nparts - a = first - alpha/2 - for i in range(Gl.nparts): - angle = (a + i*alpha + FULLC) % FULLC - value = 255*(Gl.nparts-1-i)/(Gl.nparts-1) - list.append((angle, icolor, value)) - list.sort() - a, icolor, value = list[0] - if a <> 0: - a, icolor, value = list[len(list)-1] - t = 0, icolor, value - list.insert(0, t) - return list - -def rgb_fg(): - return Gl.fg - # Obsolete code: - if Gl.alarm_on: - return Gl.bg - else: - return Gl.fg - -def rgb_bg(): - return Gl.bg - # Obsolete code: - if Gl.alarm_on: - return Gl.fg - else: - return Gl.bg - -def clearall(): - Gl.c3i(rgb_bg()) - clear() - if Gl.doublebuffer: - swapbuffers() - clear() - -def draw_alarm(color): - frontbuffer(TRUE) - Gl.c3i(color) - pushmatrix() - rotate(-((Gl.alarm_time/12)%3600), 'z') - bgnpolygon() - v2f( 0.00,1.00) - v2f( 0.04,1.05) - v2f(-0.04,1.05) - endpolygon() - popmatrix() - # - pushmatrix() - rotate(-((Gl.alarm_time)%3600), 'z') - bgnpolygon() - v2f( 0.00,1.05) - v2f( 0.07,1.10) - v2f(-0.07,1.10) - endpolygon() - popmatrix() - # - cmov2(-1.06, -1.06) - charstr(string.rjust(`Gl.alarm_time/3600`,2)) - charstr(':') - charstr(string.zfill((Gl.alarm_time/60)%60,2)) - frontbuffer(FALSE) - -def render(list, (little_hand, big_hand, seconds_hand)): - # - if Gl.colormap: - resetindex() - # - if not list: - Gl.c3i((255, 255, 255)) # White - circf(0.0, 0.0, 1.0) - else: - list.append((3600, 0, 255)) # Sentinel - # - rgb = [255, 255, 255] - a_prev = 0 - for a, icolor, value in list: - if a <> a_prev: - [r, g, b] = rgb - if Gl.debug > 1: - print rgb, a_prev, a - Gl.c3i((r, g, b)) - arcf(0.0, 0.0, 1.0, a_prev, a) - rgb[icolor] = value - a_prev = a - # - if Gl.black or not Gl.colorsubset: - # - # Draw the hands -- in black - # - Gl.c3i((0, 0, 0)) - # - if Gl.update == 1 and not Gl.iconic: - # Seconds hand is only drawn if we update every second - pushmatrix() - rotate(seconds_hand, 'z') - bgnline() - v2f(0.0, 0.0) - v2f(1.0, 0.0) - endline() - popmatrix() - # - pushmatrix() - rotate(big_hand, 'z') - rectf(0.0, -0.01, 0.97, 0.01) - circf(0.0, 0.0, 0.01) - circf(0.97, 0.0, 0.01) - popmatrix() - # - pushmatrix() - rotate(little_hand, 'z') - rectf(0.04, -0.02, 0.63, 0.02) - circf(0.04, 0.0, 0.02) - circf(0.63, 0.0, 0.02) - popmatrix() - # - # Draw the alarm time, if set or being set - # - if Gl.alarm_set: - draw_alarm(rgb_fg()) - # - if Gl.doublebuffer: swapbuffers() - -def makewindow(): - # - if Gl.debug or Gl.foreground: - foreground() - # - if Gl.fullscreen: - scrwidth, scrheight = getgdesc(GD_XPMAX), getgdesc(GD_YPMAX) - prefposition(0, scrwidth-1, 0, scrheight-1) - else: - keepaspect(1, 1) - prefsize(80, 80) - # - if not Gl.border: - noborder() - wid = winopen(Gl.name) - wintitle(Gl.title) - # - if not Gl.fullscreen: - keepaspect(1, 1) - minsize(10, 10) - maxsize(2000, 2000) - iconsize(66, 66) - winconstraints() - # - nplanes = getplanes() - nmaps = getgdesc(GD_NMMAPS) - if Gl.warnings: - print nplanes, 'color planes,', nmaps, 'color maps' - # - if Gl.doublebuffer and not Gl.colormap and nplanes < 12: - if Gl.warnings: print 'forcing single buffer mode' - Gl.doublebuffer = 0 - # - if Gl.colormap: - if not Gl.colormap: - Gl.colormap = nmaps - 1 - if Gl.warnings: - print 'not enough color planes available', - print 'for RGB mode; forcing colormap mode' - print 'using color map number', Gl.colormap - if not Gl.colorsubset: - needed = 3 - else: - needed = Gl.cyan + Gl.magenta + Gl.yellow - needed = needed*Gl.nparts - if Gl.bg <> (0, 0, 0): - needed = needed+1 - if Gl.fg <> (0, 0, 0): - needed = needed+1 - if Gl.doublebuffer: - if needed > available(nplanes/2): - Gl.doublebuffer = 0 - if Gl.warnings: - print 'not enough colors available', - print 'for double buffer mode;', - print 'forcing single buffer mode' - else: - nplanes = nplanes/2 - if needed > available(nplanes): - # Do this warning always - print 'still not enough colors available;', - print 'parts will be left white' - print '(needed', needed, 'but have only', - print available(nplanes), 'colors available)' - # - if Gl.doublebuffer: - doublebuffer() - gconfig() - # - if Gl.colormap: - Gl.c3i = pseudo_c3i - fixcolormap() - else: - Gl.c3i = c3i - RGBmode() - gconfig() - # - if Gl.fullscreen: - # XXX Should find out true screen size using getgdesc() - ortho2(-1.1*1.280, 1.1*1.280, -1.1*1.024, 1.1*1.024) - else: - ortho2(-1.1, 1.1, -1.1, 1.1) - # - return wid - -def available(nplanes): - return pow(2, nplanes) - 1 # Reserve one pixel for black - -def fixcolormap(): - multimap() - gconfig() - nplanes = getplanes() - if Gl.warnings: - print 'multimap mode has', nplanes, 'color planes' - imap = Gl.colormap - Gl.startindex = pow(2, nplanes) - 1 - Gl.stopindex = 1 - setmap(imap) - mapcolor(0, 0, 0, 0) # Fixed entry for black - if Gl.bg <> (0, 0, 0): - r, g, b = Gl.bg - mapcolor(1, r, g, b) # Fixed entry for Gl.bg - Gl.stopindex = 2 - if Gl.fg <> (0, 0, 0): - r, g, b = Gl.fg - mapcolor(2, r, g, b) # Fixed entry for Gl.fg - Gl.stopindex = 3 - Gl.overflow_seen = 0 - resetindex() - -def resetindex(): - Gl.index = Gl.startindex - -r0g0b0 = (0, 0, 0) - -def pseudo_c3i(rgb): - if rgb == r0g0b0: - index = 0 - elif rgb == Gl.bg: - index = 1 - elif rgb == Gl.fg: - index = 2 - else: - index = definecolor(rgb) - color(index) - -def definecolor(rgb): - index = Gl.index - if index < Gl.stopindex: - if Gl.debug: print 'definecolor hard case', rgb - # First see if we already have this one... - for index in range(Gl.stopindex, Gl.startindex+1): - if rgb == getmcolor(index): - if Gl.debug: print 'return', index - return index - # Don't clobber reserverd colormap entries - if not Gl.overflow_seen: - # Shouldn't happen any more, hence no Gl.warnings test - print 'mclock: out of colormap entries' - Gl.overflow_seen = 1 - return Gl.stopindex - r, g, b = rgb - if Gl.debug > 1: print 'mapcolor', (index, r, g, b) - mapcolor(index, r, g, b) - Gl.index = index - 1 - return index - -# Compute n**i -def pow(n, i): - x = 1 - for j in range(i): x = x*n - return x - -def mouseclick(mouse, updown, x, y): - if updown == 1: - # mouse button came down, start tracking - if Gl.debug: - print 'mouse', mouse, 'down at', x, y - if mouse == 2: - Gl.mouse2down = 1 - mouse2track(x, y) - elif mouse == 3: - Gl.mouse3down = 1 - mouse3track(x, y) - else: - print 'fatal error' - qdevice(MOUSEX) - qdevice(MOUSEY) - return 0 - else: - # mouse button came up, stop tracking - if Gl.debug: - print 'mouse', mouse, 'up at', x, y - unqdevice(MOUSEX) - unqdevice(MOUSEY) - if mouse == 2: - mouse2track(x, y) - Gl.mouse2down = 0 - elif mouse == 3: - mouse3track(x, y) - Gl.mouse3down = 0 - else: - print 'fatal error' - Gl.alarm_set = 1 - return 1 - -def mouse3track(x, y): - # first compute polar coordinates from x and y - cx, cy = Gl.ox + Gl.cx/2, Gl.oy + Gl.cy/2 - x, y = x - cx, y - cy - if (x, y) == (0, 0): return # would cause an exception - minutes = int(30.5 + 30.0*math.atan2(float(-x), float(-y))/pi) - if minutes == 60: minutes = 0 - a,b = Gl.alarm_minutes/15, minutes/15 - if (a,b) == (0,3): - # Moved backward through 12 o'clock: - Gl.alarm_hours = Gl.alarm_hours - 1 - if Gl.alarm_hours < 0: Gl.alarm_hours = Gl.alarm_hours + 24 - if (a,b) == (3,0): - # Moved forward through 12 o'clock: - Gl.alarm_hours = Gl.alarm_hours + 1 - if Gl.alarm_hours >= 24: Gl.alarm_hours = Gl.alarm_hours - 24 - Gl.alarm_minutes = minutes - seconds = Gl.alarm_hours * HOUR + Gl.alarm_minutes * MINUTE - if seconds <> Gl.alarm_time: - draw_alarm(rgb_bg()) - Gl.alarm_time = seconds - draw_alarm(rgb_fg()) - -def mouse2track(x, y): - # first compute polar coordinates from x and y - cx, cy = Gl.ox + Gl.cx/2, Gl.oy + Gl.cy/2 - x, y = x - cx, y - cy - if (x, y) == (0, 0): return # would cause an exception - hours = int(6.5 - float(Gl.alarm_minutes)/60.0 + 6.0*math.atan2(float(-x), float(-y))/pi) - if hours == 12: hours = 0 - if (Gl.alarm_hours,hours) == (0,11): - # Moved backward through midnight: - Gl.alarm_hours = 23 - elif (Gl.alarm_hours,hours) == (12,11): - # Moved backward through noon: - Gl.alarm_hours = 11 - elif (Gl.alarm_hours,hours) == (11,0): - # Moved forward through noon: - Gl.alarm_hours = 12 - elif (Gl.alarm_hours,hours) == (23,0): - # Moved forward through midnight: - Gl.alarm_hours = 0 - elif Gl.alarm_hours < 12: - Gl.alarm_hours = hours - else: - Gl.alarm_hours = hours + 12 - seconds = Gl.alarm_hours * HOUR + Gl.alarm_minutes * MINUTE - if seconds <> Gl.alarm_time: - draw_alarm(rgb_bg()) - Gl.alarm_time = seconds - draw_alarm(rgb_fg()) - -def initmenu(): - Gl.pup = pup = newpup() - addtopup(pup, 'M Clock%t|Alarm On/Off|Seconds Hand On/Off|Quit', 0) - -def handlemenu(): - item = dopup(Gl.pup) - if item == 1: - # Toggle alarm - if Gl.alarm_set: - Gl.alarm_set = 0 - Gl.alarm_on = 0 - else: - Gl.alarm_set = 1 - Gl.change = 1 - clearall() - elif item == 2: - # Toggle Seconds Hand - if Gl.update == 1: - Gl.update = 60 - Gl.timernoise = 60 - else: - Gl.update = 1 - Gl.timernoise = 6 - Gl.change = 1 - elif item == 3: - if Gl.debug: print 'Exit' - sys.exit(0) - -main() diff --git a/Demo/sgi/gl/mixing.py b/Demo/sgi/gl/mixing.py deleted file mode 100755 index 9a4c9c1..0000000 --- a/Demo/sgi/gl/mixing.py +++ /dev/null @@ -1,116 +0,0 @@ -#! /usr/bin/env python - -# Use Gouraud shading to mix colors. Requires Z-buffer. -# It changes the color assignments so fast that you see white. -# Left button pauses, middle rotates the square. ESC to quit. -# Experiment with a larger window (too slow) or smaller window (really white). - -from GL import * -from gl import * -import DEVICE -from math import * - -# -# tekenvlak : draw a square. with bgnpolygon -# -def tekenvlak (vc) : - bgnpolygon() - #vcarray (vc) - for i in vc : - c3f (i[1]) - v3f (i[0]) - endpolygon() - -# -# tekendoos : draw a box -# -def tekendoos (col) : - v = [(-5.0,0.0,0.0),(0.0,5.0,0.0),(5.0,0.0,0.0),(0.0,-5.0,0.0)] - vc = [(v[0],col[0]),(v[1],col[1]),(v[2],col[2]),(v[3],col[1])] - tekenvlak (vc) - -# -# initialize gl -# -def initgl () : - # - # open window - # - foreground () - keepaspect (1, 1) - prefposition (100, 500, 100, 500) - w = winopen ('PYTHON RGB') - keepaspect (1, 1) - winconstraints() - # - # configure pipeline (2buf, GOURAUD and RGBmode) - # - doublebuffer () - zbuffer (1) - shademodel (GOURAUD) - RGBmode () - gconfig () - # - # set viewing - # - perspective (900, 1, 1.0, 10.0) - polarview (10.0, 0, 0, 0) - # - # ask for the REDRAW and ESCKEY events - # - qdevice(DEVICE.MOUSE2) - qdevice(DEVICE.MOUSE3) - qdevice(DEVICE.REDRAW) - qdevice(DEVICE.ESCKEY) - - -# -# the color black -# -black = 0 -# -# GoForIT : use 2buf to redraw the object 2n times. index i is used as -# the (smoothly changing) rotation angle -# -def GoForIt(i) : - col = [(255.0,0.0,0.0), (0.0,255.0,0.0), (0.0,0.0,255.0)] - twist = 0 - freeze = 1 - while 1 : - if freeze <> 0 : - col[0],col[1],col[2] = col[1],col[2],col[0] - # - # clear z-buffer and clear background to light-blue - # - zclear() - cpack (black) - clear() - # - tekendoos (col) - # - swapbuffers() - # - if qtest() <> 0 : - dev, val = qread() - if dev == DEVICE.ESCKEY : - break - elif dev == DEVICE.REDRAW : - reshapeviewport () - elif dev == DEVICE.MOUSE2 and val <> 0 : - twist = twist + 30 - perspective (900, 1, 1.0, 10.0) - polarview (10.0, 0, 0, twist) - elif dev == DEVICE.MOUSE3 and val <> 0 : - freeze = 1 - freeze - - -# the main program -# -def main () : - initgl () - GoForIt (0) - -# -# exec main -# -main () diff --git a/Demo/sgi/gl/nurbs.py b/Demo/sgi/gl/nurbs.py deleted file mode 100755 index 6efef48..0000000 --- a/Demo/sgi/gl/nurbs.py +++ /dev/null @@ -1,171 +0,0 @@ -#! /usr/bin/env python - -# Rotate a 3D surface created using NURBS. -# -# Press left mouse button to toggle surface trimming. -# Press ESC to quit. -# -# See the GL manual for an explanation of NURBS. - -from gl import * -from GL import * -from DEVICE import * - -TRUE = 1 -FALSE = 0 -ORDER = 4 - -idmat = [1,0,0,0, 0,1,0,0, 0,0,1,0, 0,0,0,1] - -surfknots = [-1, -1, -1, -1, 1, 1, 1, 1] - -def make_ctlpoints(): - c = [] - # - ci = [] - ci.append((-2.5, -3.7, 1.0)) - ci.append((-1.5, -3.7, 3.0)) - ci.append((1.5, -3.7, -2.5)) - ci.append((2.5, -3.7, -0.75)) - c.append(ci) - # - ci = [] - ci.append((-2.5, -2.0, 3.0)) - ci.append((-1.5, -2.0, 4.0)) - ci.append((1.5, -2.0, -3.0)) - ci.append((2.5, -2.0, 0.0)) - c.append(ci) - # - ci = [] - ci.append((-2.5, 2.0, 1.0)) - ci.append((-1.5, 2.0, 0.0)) - ci.append((1.5, 2.0, -1.0)) - ci.append((2.5, 2.0, 2.0)) - c.append(ci) - # - ci = [] - ci.append((-2.5, 2.7, 1.25)) - ci.append((-1.5, 2.7, 0.1)) - ci.append((1.5, 2.7, -0.6)) - ci.append((2.5, 2.7, 0.2)) - c.append(ci) - # - return c - -ctlpoints = make_ctlpoints() - -trimknots = [0., 0., 0., 1., 1., 2., 2., 3., 3., 4., 4., 4.] - -def make_trimpoints(): - c = [] - c.append((1.0, 0.0, 1.0)) - c.append((1.0, 1.0, 1.0)) - c.append((0.0, 2.0, 2.0)) - c.append((-1.0, 1.0, 1.0)) - c.append((-1.0, 0.0, 1.0)) - c.append((-1.0, -1.0, 1.0)) - c.append((0.0, -2.0, 2.0)) - c.append((1.0, -1.0, 1.0) ) - c.append((1.0, 0.0, 1.0)) - return c - -trimpoints = make_trimpoints() - -def main(): - init_windows() - setup_queue() - make_lights() - init_view() - # - set_scene() - setnurbsproperty( N_ERRORCHECKING, 1.0 ) - setnurbsproperty( N_PIXEL_TOLERANCE, 50.0 ) - trim_flag = 0 - draw_trim_surface(trim_flag) - # - while 1: - while qtest(): - dev, val = qread() - if dev == ESCKEY: - return - elif dev == WINQUIT: - dglclose(-1) # this for DGL only - return - elif dev == REDRAW: - reshapeviewport() - set_scene() - draw_trim_surface(trim_flag) - elif dev == LEFTMOUSE: - if val: - trim_flag = (not trim_flag) - set_scene() - draw_trim_surface(trim_flag) - -def init_windows(): - foreground() - #prefposition(0, 500, 0, 500) - wid = winopen('nurbs') - wintitle('NURBS Surface') - doublebuffer() - RGBmode() - gconfig() - lsetdepth(0x000, 0x7fffff) - zbuffer( TRUE ) - -def setup_queue(): - qdevice(ESCKEY) - qdevice(REDRAW) - qdevice(RIGHTMOUSE) - qdevice(WINQUIT) - qdevice(LEFTMOUSE) #trimming - -def init_view(): - mmode(MPROJECTION) - ortho( -4., 4., -4., 4., -4., 4. ) - # - mmode(MVIEWING) - loadmatrix(idmat) - # - lmbind(MATERIAL, 1) - -def set_scene(): - lmbind(MATERIAL, 0) - RGBcolor(150,150,150) - lmbind(MATERIAL, 1) - clear() - zclear() - # - rotate( 100, 'y' ) - rotate( 100, 'z' ) - -def draw_trim_surface(trim_flag): - bgnsurface() - nurbssurface(surfknots, surfknots, ctlpoints, ORDER, ORDER, N_XYZ) - if trim_flag: - bgntrim() - nurbscurve(trimknots, trimpoints, ORDER-1, N_STW) - endtrim() - endsurface() - swapbuffers() - -def make_lights(): - lmdef(DEFLMODEL,1,[]) - lmdef(DEFLIGHT,1,[]) - # - # define material #1 - # - a = [] - a = a + [EMISSION, 0.0, 0.0, 0.0] - a = a + [AMBIENT, 0.1, 0.1, 0.1] - a = a + [DIFFUSE, 0.6, 0.3, 0.3] - a = a + [SPECULAR, 0.0, 0.6, 0.0] - a = a + [SHININESS, 2.0] - a = a + [LMNULL] - lmdef(DEFMATERIAL, 1, a) - # - # turn on lighting - # - lmbind(LIGHT0, 1) - lmbind(LMODEL, 1) - -main() diff --git a/Demo/sgi/gl/zrgb.py b/Demo/sgi/gl/zrgb.py deleted file mode 100755 index 2ad68c9..0000000 --- a/Demo/sgi/gl/zrgb.py +++ /dev/null @@ -1,168 +0,0 @@ -#! /usr/bin/env python - -# zrgb (Requires Z buffer.) -# -# This program demostrates zbuffering 3 intersecting RGB polygons while -# in doublebuffer mode where, movement of the mouse with the LEFTMOUSE -# button depressed will, rotate the 3 polygons. This is done by compound -# rotations allowing continuous screen-oriented rotations. -# -# Press the "Esc" key to exit. - -from gl import * -from GL import * -from DEVICE import * - - -idmat=[1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1] - -def main() : - # - # old and new mouse position - # - # - mode = 0 - omx = 0 - mx = 0 - omy = 0 - my = 0 - # - objmat=[1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1] - # - initialize () - # - draw_scene (objmat) - # - while (1) : - # - dev, val = qread() - # - if dev == ESCKEY : - if val : - break - # exit when key is going up, not down - # this avoids the scenario where a window - # underneath this program's window - # would otherwise "eat up" the up- - # event of the Esc key being released - return - # - elif dev == REDRAW : - reshapeviewport() - draw_scene(objmat) - # - elif dev == LEFTMOUSE: - omx = mx - omy = my - if val : - mode = 1 - else : - mode = 0 - elif dev == MOUSEX : - omx = mx - mx = val - #print omx, mx - objmat = update_scene(objmat,mx,my,omx,omy,mode) - # - elif dev == MOUSEY : - omy = my - my = val - #print omy, my - objmat = update_scene(objmat,mx,my,omx,omy,mode) - # - - -def initialize () : - # - foreground () - keepaspect(5, 4) - w = winopen('Zbuffered RGB') - # - doublebuffer() - RGBmode() - gconfig() - zbuffer(1) - lsetdepth(0x0, 0x7FFFFF) - # - qdevice(ESCKEY) - qdevice(LEFTMOUSE) - qdevice(MOUSEX) - qdevice(MOUSEY) - -def update_scene (mat, mx, my, omx, omy, mode) : - # - if mode == 1 : - mat = orient(mat, mx, my, omx, omy) - draw_scene(mat) - return mat - -def orient (mat, mx, my, omx, omy) : - # - # - pushmatrix() - loadmatrix(idmat) - # - if mx - omx : rot (float (mx - omx), 'y') - if omy - my : rot (float (omy - my), 'x') - # - multmatrix(mat) - mat = getmatrix() - # - popmatrix() - # - return mat - -def draw_scene (mat) : - RGBcolor(40, 100, 200) - clear() - zclear() - # - perspective(400, 1.25, 30.0, 60.0) - translate(0.0, 0.0, -40.0) - multmatrix(mat) - # - # skews original view to show all polygons - # - rotate(-580, 'y') - draw_polys() - # - swapbuffers() - -polygon1 = [(-10.0,-10.0,0.0),(10.0,-10.0,0.0),(-10.0,10.0,0.0)] - -polygon2 = [(0.0,-10.0,-10.0),(0.0,-10.0,10.0),(0.0,5.0,-10.0)] - -polygon3 = [(-10.0,6.0,4.0),(-10.0,3.0,4.0),(4.0,-9.0,-10.0),(4.0,-6.0,-10.0)] - -def draw_polys(): - bgnpolygon() - cpack(0x0) - v3f(polygon1[0]) - cpack(0x007F7F7F) - v3f(polygon1[1]) - cpack(0x00FFFFFF) - v3f(polygon1[2]) - endpolygon() - # - bgnpolygon() - cpack(0x0000FFFF) - v3f(polygon2[0]) - cpack(0x007FFF00) - v3f(polygon2[1]) - cpack(0x00FF0000) - v3f(polygon2[2]) - endpolygon() - # - bgnpolygon() - cpack(0x0000FFFF) - v3f(polygon3[0]) - cpack(0x00FF00FF) - v3f(polygon3[1]) - cpack(0x00FF0000) - v3f(polygon3[2]) - cpack(0x00FF00FF) - v3f(polygon3[3]) - endpolygon() - - -main () diff --git a/Demo/sgi/video/.cvsignore b/Demo/sgi/video/.cvsignore deleted file mode 100755 index 6d28ed6..0000000 --- a/Demo/sgi/video/.cvsignore +++ /dev/null @@ -1 +0,0 @@ -VeditForm.fdc diff --git a/Demo/sgi/video/DisplayVideoIn.py b/Demo/sgi/video/DisplayVideoIn.py deleted file mode 100755 index 6dbc7bc..0000000 --- a/Demo/sgi/video/DisplayVideoIn.py +++ /dev/null @@ -1,99 +0,0 @@ -# Live video input from display class. - -import gl -import GL - -# The live video input class. -# Only instantiate this if have_video is true! - -class DisplayVideoIn: - - # Initialize an instance. Arguments: - # vw, vh: size of the video window data to be captured. - # position defaults to 0, 0 but can be set later - def __init__(self, pktmax, vw, vh, type): - self.pktmax = pktmax - self.realwidth, self.realheight = vw, vh - if type <> 'rgb': - raise 'Incorrent video data type', type - self.type = type - self.width = vw - self.height = vh - # - # Open dummy window - # - gl.foreground() - gl.noport() - self.wid = gl.winopen('DisplayVideoIn') - - self.x0 = 0 - self.x1 = self.x0 + self.width - 1 - self.y0 = 0 - self.y1 = self.y0 + self.height - 1 - # Compute # full lines per packet - self.lpp = pktmax / self.linewidth() - if self.lpp <= 0: - raise 'No lines in packet', self.linewidth() - self.pktsize = self.lpp*self.linewidth() - self.data = None - self.old_data = None - self.dataoffset = 0 - self.lpos = 0 - self.hints = 0 - - # Change the size of the video being displayed. - - def resizevideo(self, vw, vh): - self.width = vw - self.height = vh - self.x1 = self.x0 + self.width - 1 - self.y1 = self.y0 + self.height - 1 - - def positionvideo(self, x, y): - self.x0 = x - self.y0 = y - self.x1 = self.x0 + self.width - 1 - self.y1 = self.y0 + self.height - 1 - - # Remove an instance. - # This turns off continuous capture. - - def close(self): - gl.winclose(self.wid) - - # Get the length in bytes of a video line - def linewidth(self): - return self.width*4 - - # Get the next video packet. - # This returns (lpos, data) where: - # - lpos is the line position - # - data is a piece of data - # The dimensions of data are: - # - pixel depth = 1 byte - # - scan line width = self.width (the vw argument to __init__()) - # - number of scan lines = self.lpp (PKTMAX / vw) - - def getnextpacket(self): - if not self.data or self.dataoffset >= len(self.data): - self.old_data = self.data - self.data = gl.readdisplay(self.x0, self.y0, \ - self.x1, self.y1, self.hints) - self.dataoffset = 0 - self.lpos = 0 - data = self.data[self.dataoffset:self.dataoffset+self.pktsize] - while self.old_data and \ - self.dataoffset+self.pktsize < len(self.data): - odata = self.old_data[self.dataoffset: \ - self.dataoffset+self.pktsize] - if odata <> data: - break - print 'skip', self.lpos - self.lpos = self.lpos + self.lpp - self.dataoffset = self.dataoffset + self.pktsize - data = self.data[self.dataoffset:\ - self.dataoffset+self.pktsize] - lpos = self.lpos - self.dataoffset = self.dataoffset + self.pktsize - self.lpos = self.lpos + self.lpp - return lpos, data diff --git a/Demo/sgi/video/Dsend.py b/Demo/sgi/video/Dsend.py deleted file mode 100755 index 7e197f7..0000000 --- a/Demo/sgi/video/Dsend.py +++ /dev/null @@ -1,188 +0,0 @@ -#! /usr/bin/env python - -# Send live video UDP packets. -# Usage: Vsend [-b] [-h height] [-p port] [-s size] [-t ttl] [-w width] -# [host] .. - -import sys -import time -import struct -import string -import math -from socket import * -from SOCKET import * -import gl, GL, DEVICE -sys.path.append('/ufs/guido/src/video') -import DisplayVideoIn -import LiveVideoOut -import SV -import getopt -from IN import * - -from senddefs import * - -def usage(msg): - print msg - print 'usage: Vsend [-b] [-h height] [-p port] [-s size] [-t ttl] [-c type] [-m]', - print '[-w width] [host] ...' - print '-b : broadcast on local net' - print '-h height : window height (default ' + `DEFHEIGHT` + ')' - print '-p port : port to use (default ' + `DEFPORT` + ')' - print '-t ttl : time-to-live (multicast only; default 1)' - print '-s size : max packet size (default ' + `DEFPKTMAX` + ')' - print '-S size : use this packet size/window size' - print '-w width : window width (default ' + `DEFWIDTH` + ')' - print '-v : print packet rate' - print '-x xpos : set x position' - print '-y ypos : set y position' - print '[host] ...: host(s) to send to (default multicast to ' + \ - DEFMCAST + ')' - sys.exit(2) - - -def main(): - sys.stdout = sys.stderr - - hosts = [] - port = DEFPORT - ttl = -1 - pktmax = DEFPKTMAX - width = DEFWIDTH - height = DEFHEIGHT - vtype = 'rgb' - verbose = 0 - xpos = ypos = 0 - - try: - opts, args = getopt.getopt(sys.argv[1:], 'bh:p:s:S:t:w:vx:y:') - except getopt.error, msg: - usage(msg) - - try: - for opt, optarg in opts: - if opt == '-p': - port = string.atoi(optarg) - if opt == '-b': - host = '' - if opt == '-t': - ttl = string.atoi(optarg) - if opt == '-S': - pktmax = string.atoi(optarg) - vidmax = SV.PAL_XMAX*SV.PAL_YMAX - if vidmax <= pktmax: - width = SV.PAL_XMAX - height = SV.PAL_YMAX - pktmax = vidmax - else: - factor = float(vidmax)/float(pktmax) - factor = math.sqrt(factor) - width = int(SV.PAL_XMAX/factor)-7 - height = int(SV.PAL_YMAX/factor)-5 - print 'video:',width,'x',height, - print 'pktsize',width*height,'..', - print pktmax - if opt == '-s': - pktmax = string.atoi(optarg) - if opt == '-w': - width = string.atoi(optarg) - if opt == '-h': - height = string.atoi(optarg) - if opt == '-c': - vtype = optarg - if opt == '-v': - verbose = 1 - if opt == '-x': - xpos = string.atoi(optarg) - if opt == '-y': - ypos = string.atoi(optarg) - except string.atoi_error, msg: - usage('bad integer: ' + msg) - - for host in args: - hosts.append(gethostbyname(host)) - - if not hosts: - hosts.append(gethostbyname(DEFMCAST)) - - gl.foreground() - gl.prefsize(width, height) - gl.stepunit(8, 6) - wid = gl.winopen('Vsend') - gl.keepaspect(width, height) - gl.stepunit(8, 6) - gl.maxsize(SV.PAL_XMAX, SV.PAL_YMAX) - gl.winconstraints() - gl.qdevice(DEVICE.ESCKEY) - gl.qdevice(DEVICE.WINSHUT) - gl.qdevice(DEVICE.WINQUIT) - gl.qdevice(DEVICE.WINFREEZE) - gl.qdevice(DEVICE.WINTHAW) - width, height = gl.getsize() - - lvo = LiveVideoOut.LiveVideoOut(wid, width, height, vtype) - - lvi = DisplayVideoIn.DisplayVideoIn(pktmax, width, height, vtype) - - if xpos or ypos: - lvi.positionvideo(xpos, ypos) - - s = socket(AF_INET, SOCK_DGRAM) - s.setsockopt(SOL_SOCKET, SO_BROADCAST, 1) - if ttl >= 0: - s.setsockopt(IPPROTO_IP, IP_MULTICAST_TTL, chr(ttl)) - - frozen = 0 - - lasttime = int(time.time()) - nframe = 0 - while 1: - - if gl.qtest(): - dev, val = gl.qread() - if dev in (DEVICE.ESCKEY, \ - DEVICE.WINSHUT, DEVICE.WINQUIT): - break - if dev == DEVICE.WINFREEZE: - frozen = 1 - if dev == DEVICE.WINTHAW: - frozen = 0 - if dev == DEVICE.REDRAW: - w, h = gl.getsize() - x, y = gl.getorigin() - if (w, h) <> (width, height): - width, height = w, h - lvi.resizevideo(width, height) - lvo.resizevideo(width, height) - - rv = lvi.getnextpacket() - if not rv: - time.sleep(0.010) - continue - - pos, data = rv - print pos, len(data) # DBG - - if not frozen: - lvo.putnextpacket(pos, data) - - hdr = struct.pack('hhh', pos, width, height) - for host in hosts: - try: - # print len(hdr+data) # DBG - s.sendto(hdr + data, (host, port)) - except error, msg: # really socket.error - if msg[0] <> 121: # no buffer space available - raise error, msg # re-raise it - print 'Warning:', msg[1] - if pos == 0 and verbose: - nframe = nframe+1 - if int(time.time()) <> lasttime: - print nframe / (time.time()-lasttime), 'fps' - nframe = 0 - lasttime = int(time.time()) - - lvi.close() - lvo.close() - - -main() diff --git a/Demo/sgi/video/LiveVideoIn.py b/Demo/sgi/video/LiveVideoIn.py deleted file mode 100755 index 661ea73..0000000 --- a/Demo/sgi/video/LiveVideoIn.py +++ /dev/null @@ -1,139 +0,0 @@ -# Live video input class. -# Note that importing this module attempts to initialize video. - - -# Check if video is available. -# There are three reasons for failure here: -# (1) this version of Python may not have the sv or imageop modules; -# (2) this machine may not have a video board; -# (3) initializing the video board may fail for another reason. -# The global variable have_video is set to true iff we reall do have video. - -try: - import sv - import SV - import imageop - try: - v = sv.OpenVideo() - have_video = 1 - except sv.error: - have_video = 0 -except ImportError: - have_video = 0 - - -# The live video input class. -# Only instantiate this if have_video is true! - -class LiveVideoIn: - - # Initialize an instance. Arguments: - # vw, vh: size of the video window data to be captured. - # For some reason, vw MUST be a multiple of 4. - # Note that the data has to be cropped unless vw and vh are - # just right for the video board (vw:vh == 4:3 and vh even). - - def __init__(self, pktmax, vw, vh, type): - if not have_video: - raise RuntimeError, 'no video available' - if vw % 4 != 0: - raise ValueError, 'vw must be a multiple of 4' - self.pktmax = pktmax - realvw = vh*SV.PAL_XMAX/SV.PAL_YMAX - if realvw < vw: - realvw = vw - self.realwidth, self.realheight = v.QuerySize(realvw, vh) - if not type in ('rgb8', 'grey', 'mono', 'grey2', 'grey4'): - raise 'Incorrent video data type', type - self.type = type - if type in ('grey', 'grey4', 'grey2', 'mono'): - v.SetParam([SV.COLOR, SV.MONO, SV.INPUT_BYPASS, 1]) - else: - v.SetParam([SV.COLOR, SV.DEFAULT_COLOR, \ - SV.INPUT_BYPASS, 0]) - # Initialize capture - (mode, self.realwidth, self.realheight, qsize, rate) = \ - v.InitContinuousCapture(SV.RGB8_FRAMES, \ - self.realwidth, self.realheight, 1, 2) - self.width = vw - self.height = vh - self.x0 = (self.realwidth-self.width)/2 - self.x1 = self.x0 + self.width - 1 - self.y0 = (self.realheight-self.height)/2 - self.y1 = self.y0 + self.height - 1 - # Compute # full lines per packet - self.lpp = pktmax / self.linewidth() - self.pktsize = self.lpp*self.linewidth() - self.data = None - self.dataoffset = 0 - self.lpos = 0 - self.justright = (self.realwidth == self.width and \ - self.realheight == self.height) -## if not self.justright: -## print 'Want:', self.width, 'x', self.height, -## print '; grab:', self.realwidth, 'x', self.realheight - - # Change the size of the video being displayed. - - def resizevideo(self, vw, vh): - self.close() - self.__init__(self.pktmax, vw, vh, self.type) - - # Remove an instance. - # This turns off continuous capture. - - def close(self): - v.EndContinuousCapture() - - # Get the length in bytes of a video line - def linewidth(self): - if self.type == 'mono': - return (self.width+7)/8 - elif self.type == 'grey2': - return (self.width+3)/4 - elif self.type == 'grey4': - return (self.width+1)/2 - else: - return self.width - - # Get the next video packet. - # This returns (lpos, data) where: - # - lpos is the line position - # - data is a piece of data - # The dimensions of data are: - # - pixel depth = 1 byte - # - scan line width = self.width (the vw argument to __init__()) - # - number of scan lines = self.lpp (PKTMAX / vw) - - def getnextpacket(self): - if not self.data or self.dataoffset >= len(self.data): - try: - cd, id = v.GetCaptureData() - except sv.error: - return None - data = cd.InterleaveFields(1) - cd.UnlockCaptureData() - if self.justright: - self.data = data - else: - self.data = imageop.crop(data, 1, \ - self.realwidth, \ - self.realheight, \ - self.x0, self.y0, \ - self.x1, self.y1) - self.lpos = 0 - self.dataoffset = 0 - if self.type == 'mono': - self.data = imageop.dither2mono(self.data, \ - self.width, self.height) - elif self.type == 'grey2': - self.data = imageop.dither2grey2(self.data, \ - self.width, self.height) - elif self.type == 'grey4': - self.data = imageop.grey2grey4(self.data, \ - self.width, self.height) - data = self.data[self.dataoffset:self.dataoffset+self.pktsize] - lpos = self.lpos - self.dataoffset = self.dataoffset + self.pktsize - self.lpos = self.lpos + self.lpp - return lpos, data diff --git a/Demo/sgi/video/LiveVideoOut.py b/Demo/sgi/video/LiveVideoOut.py deleted file mode 100755 index 6ee1846..0000000 --- a/Demo/sgi/video/LiveVideoOut.py +++ /dev/null @@ -1,130 +0,0 @@ -# Live video output (display video on the screen, presumably from the net) - -import gl -from VFile import Displayer - - -# Video output (displayer) class. - -class LiveVideoOut: - - # Call this to initialize things. Arguments: - # wid: the window id where the video is to be displayed (centered) - # vw, vh: size of the video image to be displayed - - def __init__(self, wid, vw, vh, type): - ##print 'Init', wid, xywh - ##print 'video', vw, vw - self.vw = vw - self.vh = vh - self.disp = Displayer() - if not type in ('rgb', 'rgb8', 'grey', 'mono', 'grey2', \ - 'grey4'): - raise 'Incorrent live video output type', type - if type == 'rgb': - info = (type, vw, vh, 0, 32, 0, 0, 0, 0) - else: - info = (type, vw, vh, 1, 8, 0, 0, 0, 0) - self.disp.setinfo(info) - self.wid = wid - oldwid = gl.winget() - gl.winset(wid) - self.disp.initcolormap() - self.reshapewindow() - gl.winset(oldwid) - - # Call this in response to every REDRAW event for the window - # or if the window size has changed for other reasons. - - def reshapewindow(self): - oldwid = gl.winget() - gl.winset(self.wid) - gl.reshapeviewport() - w, h = gl.getsize() - self.disp.xorigin = (w-self.vw)/2 - self.disp.yorigin = (h-self.vh)/2 - self.disp.clear() - gl.winset(oldwid) - - # Call this to change the size of the video images being displayed. - # Implies reshapewindow(). - - def resizevideo(self, vw, vh): - self.vw, self.vh = vw, vh - self.disp.setsize(vw, vh) - self.reshapewindow() - - # Return the number of bytes in one video line - def linewidth(self): - if self.disp.format == 'rgb': - return self.vw*4 - if self.disp.format == 'mono': - return (self.vw+7)/8 - elif self.disp.format == 'grey2': - return (self.vw+3)/4 - elif self.disp.format == 'grey4': - return (self.vw+1)/2 - else: - return self.vw - - # Call this to display the next video packet. Arguments: - # pos: line number where the packet begins - # data: image data of the packet - # (these correspond directly to the return values from - # LiveVideoIn.getnextpacket()). - - def putnextpacket(self, pos, data): - nline = len(data)/self.linewidth() - if nline*self.linewidth() <> len(data): - print 'Incorrect-sized video fragment ignored' - return - oldwid = gl.winget() - gl.winset(self.wid) - self.disp.showpartframe(data, None, (0, pos, self.vw, nline)) - gl.winset(oldwid) - - # Call this to close the window. - - def close(self): - pass - - # Call this to set optional mirroring of video - def setmirror(self, mirrored): - f, w, h, pf, c0, c1, c2, o, cp = self.disp.getinfo() - if type(pf) == type(()): - xpf, ypf = pf - else: - xpf = ypf = pf - xpf = abs(xpf) - if mirrored: - xpf = -xpf - info = (f, w, h, (xpf, ypf), c0, c1, c2, o, cp) - self.disp.setinfo(info) - self.disp.initcolormap() - self.disp.clear() - -# -# This derived class has one difference with the base class: the video is -# not displayed until an entire image has been gotten -# -class LiveVideoOutSlow(LiveVideoOut): - - # Reshapewindow - Realloc buffer. - # (is also called by __init__() indirectly) - - def reshapewindow(self): - LiveVideoOut.reshapewindow(self) - self.buffer = '\0'*self.linewidth()*self.vh - self.isbuffered = [] - - # putnextpacket - buffer incoming data until a complete - # image has been received - - def putnextpacket(self, pos, data): - if pos in self.isbuffered or pos == 0: - LiveVideoOut.putnextpacket(self, 0, self.buffer) - self.isbuffered = [] - self.isbuffered.append(pos) - bpos = pos * self.linewidth() - epos = bpos + len(data) - self.buffer = self.buffer[:bpos] + data + self.buffer[epos:] diff --git a/Demo/sgi/video/OldVcopy.py b/Demo/sgi/video/OldVcopy.py deleted file mode 100755 index 0eb1c7f..0000000 --- a/Demo/sgi/video/OldVcopy.py +++ /dev/null @@ -1,148 +0,0 @@ -#! /usr/bin/env python - -# Copy a video file, interactively, frame-by-frame. - -import sys -import getopt -from gl import * -from DEVICE import * -import VFile -import VGrabber -import string -import imageop - -def report(time, iframe): - print 'Frame', iframe, ': t =', time - -def usage(): - sys.stderr.write('usage: Vcopy [-t type] [-m threshold] [-a] infile outfile\n') - sys.stderr.write('-t Convert to other type\n') - sys.stderr.write('-a Automatic\n') - sys.stderr.write('-m Convert grey to mono with threshold\n') - sys.stderr.write('-d Convert grey to mono with dithering\n') - sys.exit(2) - -def help(): - print 'Command summary:' - print 'n get next image from input' - print 'w write current image to output' - -class GrabbingVoutFile(VFile.VoutFile, VGrabber.VGrabber): - pass - -def main(): - foreground() - try: - opts, args = getopt.getopt(sys.argv[1:], 't:am:d') - except getopt.error, msg: - print msg - usage() - if len(args) <> 2: - usage() - [ifile, ofile] = args - print 'open film ', ifile - ifilm = VFile.VinFile(ifile) - print 'open output ', ofile - ofilm = GrabbingVoutFile(ofile) - - ofilm.setinfo(ifilm.getinfo()) - - use_grabber = 0 - continuous = 0 - tomono = 0 - tomonodither = 0 - for o, a in opts: - if o == '-t': - ofilm.format = a - use_grabber = 1 - if o == '-a': - continuous = 1 - if o == '-m': - if ifilm.format <> 'grey': - print '-m only supported for greyscale' - sys.exit(1) - tomono = 1 - treshold = string.atoi(a) - ofilm.format = 'mono' - if o == '-d': - if ifilm.format <> 'grey': - print '-m only supported for greyscale' - sys.exit(1) - tomonodither = 1 - ofilm.format = 'mono' - - ofilm.writeheader() - # - prefsize(ifilm.width, ifilm.height) - w = winopen(ifile) - qdevice(KEYBD) - qdevice(ESCKEY) - qdevice(WINQUIT) - qdevice(WINSHUT) - print 'qdevice calls done' - # - help() - # - time, data, cdata = ifilm.getnextframe() - ifilm.showframe(data, cdata) - iframe = 1 - report(time, iframe) - # - while 1: - if continuous: - dev = KEYBD - else: - dev, val = qread() - if dev in (ESCKEY, WINQUIT, WINSHUT): - break - if dev == REDRAW: - reshapeviewport() - elif dev == KEYBD: - if continuous: - c = '0' - else: - c = chr(val) - #XXX Debug - if c == 'R': - c3i(255,0,0) - clear() - if c == 'G': - c3i(0,255,0) - clear() - if c == 'B': - c3i(0,0,255) - clear() - if c == 'w' or continuous: - if use_grabber: - try: - data, cdata = ofilm.grabframe() - except VFile.Error, msg: - print msg - break - if tomono: - data = imageop.grey2mono(data, \ - ifilm.width, ifilm.height, \ - treshold) - if tomonodither: - data = imageop.dither2mono(data, \ - ifilm.width, ifilm.height) - ofilm.writeframe(time, data, cdata) - print 'Frame', iframe, 'written.' - if c == 'n' or continuous: - try: - time,data,cdata = ifilm.getnextframe() - ifilm.showframe(data, cdata) - iframe = iframe+1 - report(time, iframe) - except EOFError: - print 'EOF' - if continuous: - break - ringbell() - elif dev == INPUTCHANGE: - pass - else: - print '(dev, val) =', (dev, val) - ofilm.close() - -main() diff --git a/Demo/sgi/video/README b/Demo/sgi/video/README deleted file mode 100644 index 6abe698..0000000 --- a/Demo/sgi/video/README +++ /dev/null @@ -1,113 +0,0 @@ -CMIF video tools -================ - -This directory contains Python and C programs to manipulate files -containing digitized video in the "CMIF video format". - -An introduction to using the basic tools is in the file "video.doc". - -A description of the video file format is in the file "cmif-film.ms" -(troff/nroff -ms input). - - -History -------- - -We started this in October 1991, when we had a large framegrabber -board on loan from SGI for a few weeks: we developed a movie recording -program and added numerous features, including still frame capture and -synchronous sound recording using a second machine (the machine -holding the framegrabber board didn't have audio). - -During the following months, when we started using and processing the -recorded film fragments, the "CMIF video format" was revised several -times, and we eventually created an object-oriented interface for -reading and writing various incarnations of these files, called VFile. -(This module is also used by our flagship application, the CMIF -editor, not in this directory but in /ufs/guido/mm/.) - -When we got our own Indigo entry-level video board (in June 1992) and -a version of the Irix video library that supported capturing PAL -format (in August 1992), Sjoerd added an interface to the video -library to Python (sv) and Guido wrote Vrec.py (based upon a still -frame grabber by Sjoerd, in turn based upon SGI demo code in C) to -record a movie using it. Vrec was soon followed by modernized -versions of the other programs (Vinfo, Vplay, Vtime) and an -interactive editor (Vedit). Finally, VFile was rewritten for more -modularity, functionality and robustness, and various other tools were -added as needed. Also, new options were added to existing tools, and -several new video file formats were added. - - Guido van Rossum - Jack Jansen - Sjoerd Mullender - - -Overview of files ------------------ - -cmif-film.ms description of the CMIF video file format (more than a - little out of date -- read the source for VFile for - more info about new file formats) - - -These are programs with a command line interface: - -Vrec.py record video movies using the Indigo video library and - board - -Vplay.py play video movies - -Vinfo.py show statistics on movies - -Vtime.py Copy a video file, manipulating the time codes (e.g. - faster/slower, or regenerate time codes, or drop - frames too close apart) - -Vcopy.py Universal video file copying tool. Can manipulate the - time codes, change the type, size, and packfactor. - Subsumes Vtime.py. - -Vmkjpeg.py compress an rgb or grey video file to jpeg[grey] format - -Vunjpeg.py expand a jpeg[grey] video file to rgb or grey format - -Vfix.py truncate the scan line width of a video file to - a multiple of 4 ('grey' images only) - -Vedit.py interactive video editing program (uses the FORMS library) - -Vsend.py unicast or multicast live video as UDP packets - -Vreceive.py receive transmissions from Vsend - -Vaddcache.py add a "cached index" to a video file, for faster playing - -Vrecb.py like Vrec.py but uses "burst capture" -- somewhat specialized - -Dsend.py like Vsend.py but sends screen snapshots (to Vreceive.py) - -DisplayVideoIn.py Like LiveVideoIn.py but reads screen snapshots - -rgb2video.py combine a sequence of rgb image files into a CMIF video file - -video2rgb.py split a CMIF video file into a sequence of rgb image files - - -These modules and files are used by the above programs: - -VFile.py classes that read and write CMIF video files - -Viewer.py two viewer classes used by Vedit - -LiveVideoIn.py live video input class, used by Vsend - -LiveVideoOut.py live video output class, used by Vsend and Vreceive - -imgconv.py Image conversion subroutines for rgb2video.py - -senddefs.py Defaults shared by Vsend and Vreceice - -watchcursor.py Generally useful module to define a watch cursor in GL - -VeditForm.fd FORMS' fdesign definition for Vedit's form diff --git a/Demo/sgi/video/VCR.py b/Demo/sgi/video/VCR.py deleted file mode 100755 index 535a7da..0000000 --- a/Demo/sgi/video/VCR.py +++ /dev/null @@ -1,534 +0,0 @@ -import fcntl -import IOCTL -from IOCTL import * -import sys -import struct -import select -import posix -import time - -DEVICE='/dev/ttyd2' - -class UnixFile: - def open(self, name, mode): - self.fd = posix.open(name, mode) - return self - - def read(self, len): - return posix.read(self.fd, len) - - def write(self, data): - dummy = posix.write(self.fd, data) - - def flush(self): - pass - - def fileno(self): - return self.fd - - def close(self): - dummy = posix.close(self.fd) - -def packttyargs(*args): - if type(args) <> type(()): - raise 'Incorrect argtype for packttyargs' - if type(args[0]) == type(1): - iflag, oflag, cflag, lflag, line, chars = args - elif type(args[0]) == type(()): - if len(args) <> 1: - raise 'Only 1 argument expected' - iflag, oflag, cflag, lflag, line, chars = args[0] - elif type(args[0]) == type([]): - if len(args) <> 1: - raise 'Only 1 argument expected' - [iflag, oflag, cflag, lflag, line, chars] = args[0] - str = struct.pack('hhhhb', iflag, oflag, cflag, lflag, line) - for c in chars: - str = str + c - return str - -def nullttyargs(): - chars = ['\0']*IOCTL.NCCS - return packttyargs(0, 0, 0, 0, 0, chars) - -def unpackttyargs(str): - args = str[:-IOCTL.NCCS] - rawchars = str[-IOCTL.NCCS:] - chars = [] - for c in rawchars: - chars.append(c) - iflag, oflag, cflag, lflag, line = struct.unpack('hhhhb', args) - return (iflag, oflag, cflag, lflag, line, chars) - -def initline(name): - fp = UnixFile().open(name, 2) - ofp = fp - fd = fp.fileno() - rv = fcntl.ioctl(fd, IOCTL.TCGETA, nullttyargs()) - iflag, oflag, cflag, lflag, line, chars = unpackttyargs(rv) - iflag = iflag & ~(INPCK|ISTRIP|INLCR|IUCLC|IXON|IXOFF) - oflag = oflag & ~OPOST - cflag = B9600|CS8|CREAD|CLOCAL - lflag = lflag & ~(ISIG|ICANON|ECHO|TOSTOP) - chars[VMIN] = chr(1) - chars[VTIME] = chr(0) - arg = packttyargs(iflag, oflag, cflag, lflag, line, chars) - dummy = fcntl.ioctl(fd, IOCTL.TCSETA, arg) - return fp, ofp - -# -# -error = 'VCR.error' - -# Commands/replies: -COMPLETION = '\x01' -ACK ='\x0a' -NAK ='\x0b' - -NUMBER_N = 0x30 -ENTER = '\x40' - -EXP_7= '\xde' -EXP_8= '\xdf' - -CL ='\x56' -CTRL_ENABLE = EXP_8 + '\xc6' -SEARCH_DATA = EXP_8 + '\x93' -ADDR_SENSE = '\x60' - -PLAY ='\x3a' -STOP ='\x3f' -EJECT='\x2a' -FF ='\xab' -REW ='\xac' -STILL='\x4f' -STEP_FWD ='\x2b' # Was: '\xad' -FM_SELECT=EXP_8 + '\xc8' -FM_STILL=EXP_8 + '\xcd' -PREVIEW=EXP_7 + '\x9d' -REVIEW=EXP_7 + '\x9e' -DM_OFF=EXP_8 + '\xc9' -DM_SET=EXP_8 + '\xc4' -FWD_SHUTTLE='\xb5' -REV_SHUTTLE='\xb6' -EM_SELECT=EXP_8 + '\xc0' -N_FRAME_REC=EXP_8 + '\x92' -SEARCH_PREROLL=EXP_8 + '\x90' -EDIT_PB_STANDBY=EXP_8 + '\x96' -EDIT_PLAY=EXP_8 + '\x98' -AUTO_EDIT=EXP_7 + '\x9c' - -IN_ENTRY=EXP_7 + '\x90' -IN_ENTRY_RESET=EXP_7 + '\x91' -IN_ENTRY_SET=EXP_7 + '\x98' -IN_ENTRY_INC=EXP_7 + '\x94' -IN_ENTRY_DEC=EXP_7 + '\x95' -IN_ENTRY_SENSE=EXP_7 + '\x9a' - -OUT_ENTRY=EXP_7 + '\x92' -OUT_ENTRY_RESET=EXP_7 + '\x93' -OUT_ENTRY_SET=EXP_7 + '\x99' -OUT_ENTRY_INC=EXP_7 + '\x96' -OUT_ENTRY_DEC=EXP_7 + '\x98' -OUT_ENTRY_SENSE=EXP_7 + '\x9b' - -MUTE_AUDIO = '\x24' -MUTE_AUDIO_OFF = '\x25' -MUTE_VIDEO = '\x26' -MUTE_VIDEO_OFF = '\x27' -MUTE_AV = EXP_7 + '\xc6' -MUTE_AV_OFF = EXP_7 + '\xc7' - -DEBUG=0 - -class VCR: - def __init__(self): - self.ifp, self.ofp = initline(DEVICE) - self.busy_cmd = None - self.async = 0 - self.cb = None - self.cb_arg = None - - def _check(self): - if self.busy_cmd: - raise error, 'Another command active: '+self.busy_cmd - - def _endlongcmd(self, name): - if not self.async: - self.waitready() - return 1 - self.busy_cmd = name - return 'VCR BUSY' - - def fileno(self): - return self.ifp.fileno() - - def setasync(self, async): - self.async = async - - def setcallback(self, cb, arg): - self.setasync(1) - self.cb = cb - self.cb_arg = arg - - def poll(self): - if not self.async: - raise error, 'Can only call poll() in async mode' - if not self.busy_cmd: - return - if self.testready(): - if self.cb: - apply(self.cb, (self.cb_arg,)) - - def _cmd(self, cmd): - if DEBUG: - print '>>>',`cmd` - self.ofp.write(cmd) - self.ofp.flush() - - def _waitdata(self, len, tout): - rep = '' - while len > 0: - if tout == None: - ready, d1, d2 = select.select( \ - [self.ifp], [], []) - else: - ready, d1, d2 = select.select( \ - [self.ifp], [], [], tout) - if ready == []: -## if rep: -## print 'FLUSHED:', `rep` - return None - data = self.ifp.read(1) - if DEBUG: - print '<<<',`data` - if data == NAK: - return NAK - rep = rep + data - len = len - 1 - return rep - - def _reply(self, len): - data = self._waitdata(len, 10) - if data == None: - raise error, 'Lost contact with VCR' - return data - - def _getnumber(self, len): - data = self._reply(len) - number = 0 - for c in data: - digit = ord(c) - NUMBER_N - if digit < 0 or digit > 9: - raise error, 'Non-digit in number'+`c` - number = number*10 + digit - return number - - def _iflush(self): - dummy = self._waitdata(10000, 0) -## if dummy: -## print 'IFLUSH:', dummy - - def simplecmd(self,cmd): - self._iflush() - for ch in cmd: - self._cmd(ch) - rep = self._reply(1) - if rep == NAK: - return 0 - elif rep <> ACK: - raise error, 'Unexpected reply:' + `rep` - return 1 - - def replycmd(self, cmd): - if not self.simplecmd(cmd[:-1]): - return 0 - self._cmd(cmd[-1]) - - def _number(self, number, digits): - if number < 0: - raise error, 'Unexpected negative number:'+ `number` - maxnum = pow(10, digits) - if number > maxnum: - raise error, 'Number too big' - while maxnum > 1: - number = number % maxnum - maxnum = maxnum / 10 - digit = number / maxnum - ok = self.simplecmd(chr(NUMBER_N + digit)) - if not ok: - raise error, 'Error while transmitting number' - - def initvcr(self, *optarg): - timeout = None - if optarg <> (): - timeout = optarg[0] - starttime = time.time() - self.busy_cmd = None - self._iflush() - while 1: -## print 'SENDCL' - self._cmd(CL) - rep = self._waitdata(1, 2) -## print `rep` - if rep in ( None, CL, NAK ): - if timeout: - if time.time() - starttime > timeout: - raise error, \ - 'No reply from VCR' - continue - break - if rep <> ACK: - raise error, 'Unexpected reply:' + `rep` - dummy = self.simplecmd(CTRL_ENABLE) - - def waitready(self): - rep = self._waitdata(1, None) - if rep == None: - raise error, 'Unexpected None reply from waitdata' - if rep not in (COMPLETION, ACK): - self._iflush() - raise error, 'Unexpected waitready reply:' + `rep` - self.busy_cmd = None - - def testready(self): - rep = self._waitdata(1, 0) - if rep == None: - return 0 - if rep not in (COMPLETION, ACK): - self._iflush() - raise error, 'Unexpected waitready reply:' + `rep` - self.busy_cmd = None - return 1 - - def play(self): return self.simplecmd(PLAY) - def stop(self): return self.simplecmd(STOP) - def ff(self): return self.simplecmd(FF) - def rew(self): return self.simplecmd(REW) - def eject(self):return self.simplecmd(EJECT) - def still(self):return self.simplecmd(STILL) - def step(self): return self.simplecmd(STEP_FWD) - - def goto(self, (h, m, s, f)): - if not self.simplecmd(SEARCH_DATA): - return 0 - self._number(h, 2) - self._number(m, 2) - self._number(s, 2) - self._number(f, 2) - if not self.simplecmd(ENTER): - return 0 - return self._endlongcmd('goto') - - # XXXX TC_SENSE doesn't seem to work - def faulty_where(self): - self._check() - self._cmd(TC_SENSE) - h = self._getnumber(2) - m = self._getnumber(2) - s = self._getnumber(2) - f = self._getnumber(2) - return (h, m, s, f) - - def where(self): - return self.addr2tc(self.sense()) - - def sense(self): - self._check() - self._cmd(ADDR_SENSE) - num = self._getnumber(5) - return num - - def addr2tc(self, num): - f = num % 25 - num = num / 25 - s = num % 60 - num = num / 60 - m = num % 60 - h = num / 60 - return (h, m, s, f) - - def tc2addr(self, (h, m, s, f)): - return ((h*60 + m)*60 + s)*25 + f - - def fmmode(self, mode): - self._check() - if mode == 'off': - arg = 0 - elif mode == 'buffer': - arg = 1 - elif mode == 'dnr': - arg = 2 - else: - raise error, 'fmmode arg should be off, buffer or dnr' - if not self.simplecmd(FM_SELECT): - return 0 - self._number(arg, 1) - if not self.simplecmd(ENTER): - return 0 - return 1 - - def mute(self, mode, value): - self._check() - if mode == 'audio': - cmds = (MUTE_AUDIO_OFF, MUTE_AUDIO) - elif mode == 'video': - cmds = (MUTE_VIDEO_OFF, MUTE_VIDEO) - elif mode == 'av': - cmds = (MUTE_AV_OFF, MUTE_AV) - else: - raise error, 'mute type should be audio, video or av' - cmd = cmds[value] - return self.simplecmd(cmd) - - def editmode(self, mode): - self._check() - if mode == 'off': - a0 = a1 = a2 = 0 - elif mode == 'format': - a0 = 4 - a1 = 7 - a2 = 4 - elif mode == 'asmbl': - a0 = 1 - a1 = 7 - a2 = 4 - elif mode == 'insert-video': - a0 = 2 - a1 = 4 - a2 = 0 - else: - raise 'editmode should be off,format,asmbl or insert-video' - if not self.simplecmd(EM_SELECT): - return 0 - self._number(a0, 1) - self._number(a1, 1) - self._number(a2, 1) - if not self.simplecmd(ENTER): - return 0 - return 1 - - def autoedit(self): - self._check() - return self._endlongcmd(AUTO_EDIT) - - def nframerec(self, num): - if not self.simplecmd(N_FRAME_REC): - return 0 - self._number(num, 4) - if not self.simplecmd(ENTER): - return 0 - return self._endlongcmd('nframerec') - - def fmstill(self): - if not self.simplecmd(FM_STILL): - return 0 - return self._endlongcmd('fmstill') - - def preview(self): - if not self.simplecmd(PREVIEW): - return 0 - return self._endlongcmd('preview') - - def review(self): - if not self.simplecmd(REVIEW): - return 0 - return self._endlongcmd('review') - - def search_preroll(self): - if not self.simplecmd(SEARCH_PREROLL): - return 0 - return self._endlongcmd('search_preroll') - - def edit_pb_standby(self): - if not self.simplecmd(EDIT_PB_STANDBY): - return 0 - return self._endlongcmd('edit_pb_standby') - - def edit_play(self): - if not self.simplecmd(EDIT_PLAY): - return 0 - return self._endlongcmd('edit_play') - - def dmcontrol(self, mode): - self._check() - if mode == 'off': - return self.simplecmd(DM_OFF) - if mode == 'multi freeze': - num = 1000 - elif mode == 'zoom freeze': - num = 2000 - elif mode == 'digital slow': - num = 3000 - elif mode == 'freeze': - num = 4011 - else: - raise error, 'unknown dmcontrol argument: ' + `mode` - if not self.simplecmd(DM_SET): - return 0 - self._number(num, 4) - if not self.simplecmd(ENTER): - return 0 - return 1 - - def fwdshuttle(self, num): - if not self.simplecmd(FWD_SHUTTLE): - return 0 - self._number(num, 1) - return 1 - - def revshuttle(self, num): - if not self.simplecmd(REV_SHUTTLE): - return 0 - self._number(num, 1) - return 1 - - def getentry(self, which): - self._check() - if which == 'in': - cmd = IN_ENTRY_SENSE - elif which == 'out': - cmd = OUT_ENTRY_SENSE - self.replycmd(cmd) - h = self._getnumber(2) - m = self._getnumber(2) - s = self._getnumber(2) - f = self._getnumber(2) - return (h, m, s, f) - - def inentry(self, arg): - return self.ioentry(arg, (IN_ENTRY, IN_ENTRY_RESET, \ - IN_ENTRY_SET, IN_ENTRY_INC, IN_ENTRY_DEC)) - - def outentry(self, arg): - return self.ioentry(arg, (OUT_ENTRY, OUT_ENTRY_RESET, \ - OUT_ENTRY_SET, OUT_ENTRY_INC, OUT_ENTRY_DEC)) - - def ioentry(self, arg, (Load, Clear, Set, Inc, Dec)): - self._check() - if type(arg) == type(()): - h, m, s, f = arg - if not self.simplecmd(Set): - return 0 - self._number(h,2) - self._number(m,2) - self._number(s,2) - self._number(f,2) - if not self.simplecmd(ENTER): - return 0 - return 1 - elif arg == 'reset': - cmd = Clear - elif arg == 'load': - cmd = Load - elif arg == '+': - cmd = Inc - elif arg == '-': - cmd = Dec - else: - raise error, 'Arg should be +,-,reset,load or (h,m,s,f)' - return self.simplecmd(cmd) - - def cancel(self): - d = self.simplecmd(CL) - self.busy_cmd = None diff --git a/Demo/sgi/video/VFile.py b/Demo/sgi/video/VFile.py deleted file mode 100755 index 2f435d4..0000000 --- a/Demo/sgi/video/VFile.py +++ /dev/null @@ -1,1193 +0,0 @@ -# Classes to read and write CMIF video files. -# (For a description of the CMIF video format, see cmif-file.ms.) - - -# Layers of functionality: -# -# VideoParams: maintain essential parameters of a video file -# Displayer: display a frame in a window (with some extra parameters) -# BasicVinFile: read a CMIF video file -# BasicVoutFile: write a CMIF video file -# VinFile: BasicVinFile + Displayer -# VoutFile: BasicVoutFile + Displayer -# -# XXX Future extension: -# BasicVinoutFile: supports overwriting of individual frames - - -# Imported modules - -import sys -try: - import gl - import GL - import GET - no_gl = 0 -except ImportError: - no_gl = 1 -import colorsys -import imageop - - -# Exception raised for various occasions - -Error = 'VFile.Error' # file format errors -CallError = 'VFile.CallError' # bad call -AssertError = 'VFile.AssertError' # internal malfunction - - -# Max nr. of colormap entries to use - -MAXMAP = 4096 - 256 - - -# Parametrizations of colormap handling based on color system. -# (These functions are used via eval with a constructed argument!) - -def conv_grey(l, x, y): - return colorsys.yiq_to_rgb(l, 0, 0) - -def conv_grey4(l, x, y): - return colorsys.yiq_to_rgb(l*17, 0, 0) - -def conv_mono(l, x, y): - return colorsys.yiq_to_rgb(l*255, 0, 0) - -def conv_yiq(y, i, q): - return colorsys.yiq_to_rgb(y, (i-0.5)*1.2, q-0.5) - -def conv_hls(l, h, s): - return colorsys.hls_to_rgb(h, l, s) - -def conv_hsv(v, h, s): - return colorsys.hsv_to_rgb(h, s, v) - -def conv_rgb(r, g, b): - raise Error, 'Attempt to make RGB colormap' - -def conv_rgb8(rgb, d1, d2): - rgb = int(rgb*255.0) - r = (rgb >> 5) & 0x07 - g = (rgb ) & 0x07 - b = (rgb >> 3) & 0x03 - return (r/7.0, g/7.0, b/3.0) - -def conv_jpeg(r, g, b): - raise Error, 'Attempt to make RGB colormap (jpeg)' - -conv_jpeggrey = conv_grey -conv_grey2 = conv_grey - - -# Choose one of the above based upon a color system name - -def choose_conversion(format): - try: - return eval('conv_' + format) - except: - raise Error, 'Unknown color system: ' + `format` - - -# Inverses of the above - -def inv_grey(r, g, b): - y, i, q = colorsys.rgb_to_yiq(r, g, b) - return y, 0, 0 - -def inv_yiq(r, g, b): - y, i, q = colorsys.rgb_to_yiq(r, g, b) - return y, i/1.2 + 0.5, q + 0.5 - -def inv_hls(r, g, b): - h, l, s = colorsys.rgb_to_hls(r, g, b) - return l, h, s - -def inv_hsv(r, g, b): - h, s, v = colorsys.rgb_to_hsv(r, g, b) - return v, h, s - -def inv_rgb(r, g, b): - raise Error, 'Attempt to invert RGB colormap' - -def inv_rgb8(r, g, b): - r = int(r*7.0) - g = int(g*7.0) - b = int(b*7.0) - rgb = ((r&7) << 5) | ((b&3) << 3) | (g&7) - return rgb / 255.0, 0, 0 - -def inv_jpeg(r, g, b): - raise Error, 'Attempt to invert RGB colormap (jpeg)' - -inv_jpeggrey = inv_grey - - -# Choose one of the above based upon a color system name - -def choose_inverse(format): - try: - return eval('inv_' + format) - except: - raise Error, 'Unknown color system: ' + `format` - - -# Predicate to see whether this is an entry level (non-XS) Indigo. -# If so we can lrectwrite 8-bit wide pixels into a window in RGB mode - -def is_entry_indigo(): - # XXX hack, hack. We should call gl.gversion() but that doesn't - # exist in earlier Python versions. Therefore we check the number - # of bitplanes *and* the size of the monitor. - xmax = gl.getgdesc(GL.GD_XPMAX) - if xmax <> 1024: return 0 - ymax = gl.getgdesc(GL.GD_YPMAX) - if ymax != 768: return 0 - r = gl.getgdesc(GL.GD_BITS_NORM_SNG_RED) - g = gl.getgdesc(GL.GD_BITS_NORM_SNG_GREEN) - b = gl.getgdesc(GL.GD_BITS_NORM_SNG_BLUE) - return (r, g, b) == (3, 3, 2) - - -# Predicate to see whether this machine supports pixmode(PM_SIZE) with -# values 1 or 4. -# -# XXX Temporarily disabled, since it is unclear which machines support -# XXX which pixelsizes. -# -# XXX The XS appears to support 4 bit pixels, but (looking at osview) it -# XXX seems as if the conversion is done by the kernel (unpacking ourselves -# XXX is faster than using PM_SIZE=4) - -def support_packed_pixels(): - return 0 # To be architecture-dependent - - - -# Tables listing bits per pixel for some formats - -bitsperpixel = { \ - 'rgb': 32, \ - 'rgb8': 8, \ - 'grey': 8, \ - 'grey4': 4, \ - 'grey2': 2, \ - 'mono': 1, \ - 'compress': 32, \ -} - -bppafterdecomp = {'jpeg': 32, 'jpeggrey': 8} - - -# Base class to manage video format parameters - -class VideoParams: - - # Initialize an instance. - # Set all parameters to something decent - # (except width and height are set to zero) - - def __init__(self): - # Essential parameters - self.frozen = 0 # if set, can't change parameters - self.format = 'grey' # color system used - # Choose from: grey, rgb, rgb8, hsv, yiq, hls, jpeg, jpeggrey, - # mono, grey2, grey4 - self.width = 0 # width of frame - self.height = 0 # height of frame - self.packfactor = 1, 1 # expansion using rectzoom - # Colormap info - self.c0bits = 8 # bits in first color dimension - self.c1bits = 0 # bits in second color dimension - self.c2bits = 0 # bits in third color dimension - self.offset = 0 # colormap index offset (XXX ???) - self.chrompack = 0 # set if separate chrominance data - self.setderived() - self.decompressor = None - - # Freeze the parameters (disallow changes) - - def freeze(self): - self.frozen = 1 - - # Unfreeze the parameters (allow changes) - - def unfreeze(self): - self.frozen = 0 - - # Set some values derived from the standard info values - - def setderived(self): - if self.frozen: raise AssertError - if bitsperpixel.has_key(self.format): - self.bpp = bitsperpixel[self.format] - else: - self.bpp = 0 - xpf, ypf = self.packfactor - self.xpf = abs(xpf) - self.ypf = abs(ypf) - self.mirror_image = (xpf < 0) - self.upside_down = (ypf < 0) - self.realwidth = self.width / self.xpf - self.realheight = self.height / self.ypf - - # Set colormap info - - def setcmapinfo(self): - stuff = 0, 0, 0, 0, 0 - if self.format in ('rgb8', 'grey'): - stuff = 8, 0, 0, 0, 0 - if self.format == 'grey4': - stuff = 4, 0, 0, 0, 0 - if self.format == 'grey2': - stuff = 2, 0, 0, 0, 0 - if self.format == 'mono': - stuff = 1, 0, 0, 0, 0 - self.c0bits, self.c1bits, self.c2bits, \ - self.offset, self.chrompack = stuff - - # Set the frame width and height (e.g. from gl.getsize()) - - def setsize(self, width, height): - if self.frozen: raise CallError - width = (width/self.xpf)*self.xpf - height = (height/self.ypf)*self.ypf - self.width, self.height = width, height - self.setderived() - - # Retrieve the frame width and height (e.g. for gl.prefsize()) - - def getsize(self): - return (self.width, self.height) - - # Set the format - - def setformat(self, format): - if self.frozen: raise CallError - self.format = format - self.setderived() - self.setcmapinfo() - - # Get the format - - def getformat(self): - return self.format - - # Set the packfactor - - def setpf(self, pf): - if self.frozen: raise CallError - if type(pf) == type(1): - pf = (pf, pf) - if type(pf) is not type(()) or len(pf) <> 2: raise CallError - self.packfactor = pf - self.setderived() - - # Get the packfactor - - def getpf(self): - return self.packfactor - - # Set all parameters - - def setinfo(self, values): - if self.frozen: raise CallError - self.setformat(values[0]) - self.setpf(values[3]) - self.setsize(values[1], values[2]) - (self.c0bits, self.c1bits, self.c2bits, \ - self.offset, self.chrompack) = values[4:9] - if self.format == 'compress' and len(values) > 9: - self.compressheader = values[9] - self.setderived() - - # Retrieve all parameters in a format suitable for a subsequent - # call to setinfo() - - def getinfo(self): - return (self.format, self.width, self.height, self.packfactor,\ - self.c0bits, self.c1bits, self.c2bits, self.offset, \ - self.chrompack) - - def getcompressheader(self): - return self.compressheader - - def setcompressheader(self, ch): - self.compressheader = ch - - # Write the relevant bits to stdout - - def printinfo(self): - print 'Format: ', self.format - print 'Size: ', self.width, 'x', self.height - print 'Pack: ', self.packfactor, '; chrom:', self.chrompack - print 'Bpp: ', self.bpp - print 'Bits: ', self.c0bits, self.c1bits, self.c2bits - print 'Offset: ', self.offset - - # Calculate data size, if possible - # (Not counting frame header or cdata size) - - def calcframesize(self): - if not self.bpp: raise CallError - size = self.width/self.xpf * self.height/self.ypf - size = (size * self.bpp + 7) / 8 - return size - - # Decompress a possibly compressed frame. This method is here - # since you sometimes want to use it on a VFile instance and sometimes - # on a Displayer instance. - # - # XXXX This should also handle jpeg. Actually, the whole mechanism - # should be much more of 'ihave/iwant' style, also allowing you to - # read, say, greyscale images from a color movie. - - def decompress(self, data): - if self.format <> 'compress': - return data - if not self.decompressor: - import cl - scheme = cl.QueryScheme(self.compressheader) - self.decompressor = cl.OpenDecompressor(scheme) - headersize = self.decompressor.ReadHeader(self.compressheader) - width = self.decompressor.GetParam(cl.IMAGE_WIDTH) - height = self.decompressor.GetParam(cl.IMAGE_HEIGHT) - params = [cl.ORIGINAL_FORMAT, cl.RGBX, \ - cl.ORIENTATION, cl.BOTTOM_UP, \ - cl.FRAME_BUFFER_SIZE, width*height*cl.BytesPerPixel(cl.RGBX)] - self.decompressor.SetParams(params) - data = self.decompressor.Decompress(1, data) - return data - - -# Class to display video frames in a window. -# It is the caller's responsibility to ensure that the correct window -# is current when using showframe(), initcolormap(), clear() and clearto() - -class Displayer(VideoParams): - - # Initialize an instance. - # This does not need a current window - - def __init__(self): - if no_gl: - raise RuntimeError, \ - 'no gl module available, so cannot display' - VideoParams.__init__(self) - # User-settable parameters - self.magnify = 1.0 # frame magnification factor - self.xorigin = 0 # x frame offset - self.yorigin = 0 # y frame offset (from bottom) - self.quiet = 0 # if set, don't print messages - self.fallback = 1 # allow fallback to grey - # Internal flags - self.colormapinited = 0 # must initialize window - self.skipchrom = 0 # don't skip chrominance data - self.color0 = None # magic, used by clearto() - self.fixcolor0 = 0 # don't need to fix color0 - self.mustunpack = (not support_packed_pixels()) - - # setinfo() must reset some internal flags - - def setinfo(self, values): - VideoParams.setinfo(self, values) - self.colormapinited = 0 - self.skipchrom = 0 - self.color0 = None - self.fixcolor0 = 0 - - # Show one frame, initializing the window if necessary - - def showframe(self, data, chromdata): - self.showpartframe(data, chromdata, \ - (0,0,self.width,self.height)) - - def showpartframe(self, data, chromdata, (x,y,w,h)): - pmsize = self.bpp - xpf, ypf = self.xpf, self.ypf - if self.upside_down: - gl.pixmode(GL.PM_TTOB, 1) - if self.mirror_image: - gl.pixmode(GL.PM_RTOL, 1) - if self.format in ('jpeg', 'jpeggrey'): - import jpeg - data, width, height, bytes = jpeg.decompress(data) - pmsize = bytes*8 - elif self.format == 'compress': - data = self.decompress(data) - pmsize = 32 - elif self.format in ('mono', 'grey4'): - if self.mustunpack: - if self.format == 'mono': - data = imageop.mono2grey(data, \ - w/xpf, h/ypf, 0x20, 0xdf) - elif self.format == 'grey4': - data = imageop.grey42grey(data, \ - w/xpf, h/ypf) - pmsize = 8 - elif self.format == 'grey2': - data = imageop.grey22grey(data, w/xpf, h/ypf) - pmsize = 8 - if not self.colormapinited: - self.initcolormap() - if self.fixcolor0: - gl.mapcolor(self.color0) - self.fixcolor0 = 0 - xfactor = yfactor = self.magnify - xfactor = xfactor * xpf - yfactor = yfactor * ypf - if chromdata and not self.skipchrom: - cp = self.chrompack - cx = int(x*xfactor*cp) + self.xorigin - cy = int(y*yfactor*cp) + self.yorigin - cw = (w+cp-1)/cp - ch = (h+cp-1)/cp - gl.rectzoom(xfactor*cp, yfactor*cp) - gl.pixmode(GL.PM_SIZE, 16) - gl.writemask(self.mask - ((1 << self.c0bits) - 1)) - gl.lrectwrite(cx, cy, cx + cw - 1, cy + ch - 1, \ - chromdata) - # - if pmsize < 32: - gl.writemask((1 << self.c0bits) - 1) - gl.pixmode(GL.PM_SIZE, pmsize) - w = w/xpf - h = h/ypf - x = x/xpf - y = y/ypf - gl.rectzoom(xfactor, yfactor) - x = int(x*xfactor)+self.xorigin - y = int(y*yfactor)+self.yorigin - gl.lrectwrite(x, y, x + w - 1, y + h - 1, data) - gl.gflush() - - # Initialize the window: set RGB or colormap mode as required, - # fill in the colormap, and clear the window - - def initcolormap(self): - self.colormapinited = 1 - self.color0 = None - self.fixcolor0 = 0 - if self.format in ('rgb', 'jpeg', 'compress'): - self.set_rgbmode() - gl.RGBcolor(200, 200, 200) # XXX rather light grey - gl.clear() - return - # This only works on an Entry-level Indigo from IRIX 4.0.5 - if self.format == 'rgb8' and is_entry_indigo() and \ - gl.gversion() == 'GL4DLG-4.0.': # Note trailing '.'! - self.set_rgbmode() - gl.RGBcolor(200, 200, 200) # XXX rather light grey - gl.clear() - gl.pixmode(GL.PM_SIZE, 8) - return - self.set_cmode() - self.skipchrom = 0 - if self.offset == 0: - self.mask = 0x7ff - else: - self.mask = 0xfff - if not self.quiet: - sys.stderr.write('Initializing color map...') - self._initcmap() - gl.clear() - if not self.quiet: - sys.stderr.write(' Done.\n') - - # Set the window in RGB mode (may be overridden for Glx window) - - def set_rgbmode(self): - gl.RGBmode() - gl.gconfig() - - # Set the window in colormap mode (may be overridden for Glx window) - - def set_cmode(self): - gl.cmode() - gl.gconfig() - - # Clear the window to a default color - - def clear(self): - if not self.colormapinited: raise CallError - if gl.getdisplaymode() in (GET.DMRGB, GET.DMRGBDOUBLE): - gl.RGBcolor(200, 200, 200) # XXX rather light grey - gl.clear() - return - gl.writemask(0xffffffff) - gl.clear() - - # Clear the window to a given RGB color. - # This may steal the first color index used; the next call to - # showframe() will restore the intended mapping for that index - - def clearto(self, r, g, b): - if not self.colormapinited: raise CallError - if gl.getdisplaymode() in (GET.DMRGB, GET.DMRGBDOUBLE): - gl.RGBcolor(r, g, b) - gl.clear() - return - index = self.color0[0] - self.fixcolor0 = 1 - gl.mapcolor(index, r, g, b) - gl.writemask(0xffffffff) - gl.clear() - gl.gflush() - - # Do the hard work for initializing the colormap (internal). - # This also sets the current color to the first color index - # used -- the caller should never change this since it is used - # by clear() and clearto() - - def _initcmap(self): - map = [] - if self.format in ('mono', 'grey4') and self.mustunpack: - convcolor = conv_grey - else: - convcolor = choose_conversion(self.format) - maxbits = gl.getgdesc(GL.GD_BITS_NORM_SNG_CMODE) - if maxbits > 11: - maxbits = 11 - c0bits = self.c0bits - c1bits = self.c1bits - c2bits = self.c2bits - if c0bits+c1bits+c2bits > maxbits: - if self.fallback and c0bits < maxbits: - # Cannot display frames in this mode, use grey - self.skipchrom = 1 - c1bits = c2bits = 0 - convcolor = choose_conversion('grey') - else: - raise Error, 'Sorry, '+`maxbits`+ \ - ' bits max on this machine' - maxc0 = 1 << c0bits - maxc1 = 1 << c1bits - maxc2 = 1 << c2bits - if self.offset == 0 and maxbits == 11: - offset = 2048 - else: - offset = self.offset - if maxbits <> 11: - offset = offset & ((1< type(()): - raise Error, filename + ': Bad (w,h,pf) info' - if len(x) == 3: - width, height, packfactor = x - if packfactor == 0 and version < 3.0: - format = 'rgb' - c0bits = 0 - elif len(x) == 2 and version <= 1.0: - width, height = x - packfactor = 2 - else: - raise Error, filename + ': Bad (w,h,pf) info' - if type(packfactor) is type(0): - if packfactor == 0: packfactor = 1 - xpf = ypf = packfactor - else: - xpf, ypf = packfactor - if upside_down: - ypf = -ypf - packfactor = (xpf, ypf) - xpf = abs(xpf) - ypf = abs(ypf) - width = (width/xpf) * xpf - height = (height/ypf) * ypf - # - # Return (version, values) - # - values = (format, width, height, packfactor, \ - c0bits, c1bits, c2bits, offset, chrompack, compressheader) - return (version, values) - - -# Read a *frame* header -- separate functions per version. -# Return (timecode, datasize, chromdatasize). -# Raise EOFError if end of data is reached. -# Raise Error if data is bad. - -def readv0frameheader(fp): - line = fp.readline() - if not line or line == '\n': raise EOFError - try: - t = eval(line[:-1]) - except: - raise Error, 'Bad 0.0 frame header' - return (t, 0, 0) - -def readv1frameheader(fp): - line = fp.readline() - if not line or line == '\n': raise EOFError - try: - t, datasize = eval(line[:-1]) - except: - raise Error, 'Bad 1.0 frame header' - return (t, datasize, 0) - -def readv2frameheader(fp): - line = fp.readline() - if not line or line == '\n': raise EOFError - try: - t, datasize = eval(line[:-1]) - except: - raise Error, 'Bad 2.0 frame header' - return (t, datasize, 0) - -def readv3frameheader(fp): - line = fp.readline() - if not line or line == '\n': raise EOFError - try: - t, datasize, chromdatasize = x = eval(line[:-1]) - except: - raise Error, 'Bad 3.[01] frame header' - return x - - -# Write a CMIF video file header (always version 3.1) - -def writefileheader(fp, values): - (format, width, height, packfactor, \ - c0bits, c1bits, c2bits, offset, chrompack) = values - # - # Write identifying header - # - fp.write('CMIF video 3.1\n') - # - # Write color encoding info - # - if format in ('rgb', 'jpeg'): - data = (format, 0) - elif format in ('grey', 'jpeggrey', 'mono', 'grey2', 'grey4'): - data = (format, c0bits) - else: - data = (format, (c0bits, c1bits, c2bits, chrompack, offset)) - fp.write(`data`+'\n') - # - # Write frame geometry info - # - data = (width, height, packfactor) - fp.write(`data`+'\n') - -def writecompressfileheader(fp, cheader, values): - (format, width, height, packfactor, \ - c0bits, c1bits, c2bits, offset, chrompack) = values - # - # Write identifying header - # - fp.write('CMIF video 3.1\n') - # - # Write color encoding info - # - data = (format, cheader) - fp.write(`data`+'\n') - # - # Write frame geometry info - # - data = (width, height, packfactor) - fp.write(`data`+'\n') - - -# Basic class for reading CMIF video files - -class BasicVinFile(VideoParams): - - def __init__(self, filename): - if type(filename) != type(''): - fp = filename - filename = '???' - elif filename == '-': - fp = sys.stdin - else: - fp = open(filename, 'r') - self.initfp(fp, filename) - - def initfp(self, fp, filename): - VideoParams.__init__(self) - self.fp = fp - self.filename = filename - self.version, values = readfileheader(fp, filename) - self.setinfo(values) - self.freeze() - if self.version == 0.0: - w, h, pf = self.width, self.height, self.packfactor - if pf == 0: - self._datasize = w*h*4 - else: - self._datasize = (w/pf) * (h/pf) - self._readframeheader = self._readv0frameheader - elif self.version == 1.0: - self._readframeheader = readv1frameheader - elif self.version == 2.0: - self._readframeheader = readv2frameheader - elif self.version in (3.0, 3.1): - self._readframeheader = readv3frameheader - else: - raise Error, \ - filename + ': Bad version: ' + `self.version` - self.framecount = 0 - self.atframeheader = 1 - self.eofseen = 0 - self.errorseen = 0 - try: - self.startpos = self.fp.tell() - self.canseek = 1 - except IOError: - self.startpos = -1 - self.canseek = 0 - - def _readv0frameheader(self, fp): - t, ds, cs = readv0frameheader(fp) - ds = self._datasize - return (t, ds, cs) - - def close(self): - self.fp.close() - del self.fp - del self._readframeheader - - def rewind(self): - if not self.canseek: - raise Error, self.filename + ': can\'t seek' - self.fp.seek(self.startpos) - self.framecount = 0 - self.atframeheader = 1 - self.eofseen = 0 - self.errorseen = 0 - - def warmcache(self): - print '[BasicVinFile.warmcache() not implemented]' - - def printinfo(self): - print 'File: ', self.filename - print 'Size: ', getfilesize(self.filename) - print 'Version: ', self.version - VideoParams.printinfo(self) - - def getnextframe(self): - t, ds, cs = self.getnextframeheader() - data, cdata = self.getnextframedata(ds, cs) - return (t, data, cdata) - - def skipnextframe(self): - t, ds, cs = self.getnextframeheader() - self.skipnextframedata(ds, cs) - return t - - def getnextframeheader(self): - if self.eofseen: raise EOFError - if self.errorseen: raise CallError - if not self.atframeheader: raise CallError - self.atframeheader = 0 - try: - return self._readframeheader(self.fp) - except Error, msg: - self.errorseen = 1 - # Patch up the error message - raise Error, self.filename + ': ' + msg - except EOFError: - self.eofseen = 1 - raise EOFError - - def getnextframedata(self, ds, cs): - if self.eofseen: raise EOFError - if self.errorseen: raise CallError - if self.atframeheader: raise CallError - if ds: - data = self.fp.read(ds) - if len(data) < ds: - self.eofseen = 1 - raise EOFError - else: - data = '' - if cs: - cdata = self.fp.read(cs) - if len(cdata) < cs: - self.eofseen = 1 - raise EOFError - else: - cdata = '' - self.atframeheader = 1 - self.framecount = self.framecount + 1 - return (data, cdata) - - def skipnextframedata(self, ds, cs): - if self.eofseen: raise EOFError - if self.errorseen: raise CallError - if self.atframeheader: raise CallError - # Note that this won't raise EOFError for a partial frame - # since there is no easy way to tell whether a seek - # ended up beyond the end of the file - if self.canseek: - self.fp.seek(ds + cs, 1) # Relative seek - else: - dummy = self.fp.read(ds + cs) - del dummy - self.atframeheader = 1 - self.framecount = self.framecount + 1 - - -# Subroutine to return a file's size in bytes - -def getfilesize(filename): - import os, stat - try: - st = os.stat(filename) - return st[stat.ST_SIZE] - except os.error: - return 0 - - -# Derived class implementing random access and index cached in the file - -class RandomVinFile(BasicVinFile): - - def initfp(self, fp, filename): - BasicVinFile.initfp(self, fp, filename) - self.index = [] - - def warmcache(self): - if len(self.index) == 0: - try: - self.readcache() - except Error: - self.buildcache() - else: - print '[RandomVinFile.warmcache(): too late]' - self.rewind() - - def buildcache(self): - self.index = [] - self.rewind() - while 1: - try: dummy = self.skipnextframe() - except EOFError: break - self.rewind() - - def writecache(self): - # Raises IOerror if the file is not seekable & writable! - import marshal - if len(self.index) == 0: - self.buildcache() - if len(self.index) == 0: - raise Error, self.filename + ': No frames' - self.fp.seek(0, 2) - self.fp.write('\n/////CMIF/////\n') - pos = self.fp.tell() - data = `pos` - data = '\n-*-*-CMIF-*-*-\n' + data + ' '*(15-len(data)) + '\n' - try: - marshal.dump(self.index, self.fp) - self.fp.write(data) - self.fp.flush() - finally: - self.rewind() - - def readcache(self): - # Raises Error if there is no cache in the file - import marshal - if len(self.index) <> 0: - raise CallError - self.fp.seek(-32, 2) - data = self.fp.read() - if data[:16] <> '\n-*-*-CMIF-*-*-\n' or data[-1:] <> '\n': - self.rewind() - raise Error, self.filename + ': No cache' - pos = eval(data[16:-1]) - self.fp.seek(pos) - try: - self.index = marshal.load(self.fp) - except TypeError: - self.rewind() - raise Error, self.filename + ': Bad cache' - self.rewind() - - def getnextframeheader(self): - if self.framecount < len(self.index): - return self._getindexframeheader(self.framecount) - if self.framecount > len(self.index): - raise AssertError, \ - 'managed to bypass index?!?' - rv = BasicVinFile.getnextframeheader(self) - if self.canseek: - pos = self.fp.tell() - self.index.append((rv, pos)) - return rv - - def getrandomframe(self, i): - t, ds, cs = self.getrandomframeheader(i) - data, cdata = self.getnextframedata(ds, cs) - return t, data, cdata - - def getrandomframeheader(self, i): - if i < 0: raise ValueError, 'negative frame index' - if not self.canseek: - raise Error, self.filename + ': can\'t seek' - if i < len(self.index): - return self._getindexframeheader(i) - if len(self.index) > 0: - rv = self.getrandomframeheader(len(self.index)-1) - else: - self.rewind() - rv = self.getnextframeheader() - while i > self.framecount: - self.skipnextframedata() - rv = self.getnextframeheader() - return rv - - def _getindexframeheader(self, i): - (rv, pos) = self.index[i] - self.fp.seek(pos) - self.framecount = i - self.atframeheader = 0 - self.eofseen = 0 - self.errorseen = 0 - return rv - - -# Basic class for writing CMIF video files - -class BasicVoutFile(VideoParams): - - def __init__(self, filename): - if type(filename) != type(''): - fp = filename - filename = '???' - elif filename == '-': - fp = sys.stdout - else: - fp = open(filename, 'w') - self.initfp(fp, filename) - - def initfp(self, fp, filename): - VideoParams.__init__(self) - self.fp = fp - self.filename = filename - self.version = 3.1 # In case anyone inquries - - def flush(self): - self.fp.flush() - - def close(self): - self.fp.close() - del self.fp - - def prealloc(self, nframes): - if not self.frozen: raise CallError - data = '\xff' * (self.calcframesize() + 64) - pos = self.fp.tell() - for i in range(nframes): - self.fp.write(data) - self.fp.seek(pos) - - def writeheader(self): - if self.frozen: raise CallError - if self.format == 'compress': - writecompressfileheader(self.fp, self.compressheader, \ - self.getinfo()) - else: - writefileheader(self.fp, self.getinfo()) - self.freeze() - self.atheader = 1 - self.framecount = 0 - - def rewind(self): - self.fp.seek(0) - self.unfreeze() - self.atheader = 1 - self.framecount = 0 - - def printinfo(self): - print 'File: ', self.filename - VideoParams.printinfo(self) - - def writeframe(self, t, data, cdata): - if data: ds = len(data) - else: ds = 0 - if cdata: cs = len(cdata) - else: cs = 0 - self.writeframeheader(t, ds, cs) - self.writeframedata(data, cdata) - - def writeframeheader(self, t, ds, cs): - if not self.frozen: self.writeheader() - if not self.atheader: raise CallError - data = `(t, ds, cs)` - n = len(data) - if n < 63: data = data + ' '*(63-n) - self.fp.write(data + '\n') - self.atheader = 0 - - def writeframedata(self, data, cdata): - if not self.frozen or self.atheader: raise CallError - if data: self.fp.write(data) - if cdata: self.fp.write(cdata) - self.atheader = 1 - self.framecount = self.framecount + 1 - - -# Classes that combine files with displayers: - -class VinFile(RandomVinFile, Displayer): - - def initfp(self, fp, filename): - Displayer.__init__(self) - RandomVinFile.initfp(self, fp, filename) - - def shownextframe(self): - t, data, cdata = self.getnextframe() - self.showframe(data, cdata) - return t - - -class VoutFile(BasicVoutFile, Displayer): - - def initfp(self, fp, filename): - Displayer.__init__(self) -## Grabber.__init__(self) # XXX not needed - BasicVoutFile.initfp(self, fp, filename) - - -# Simple test program (VinFile only) - -def test(): - import time - if sys.argv[1:]: filename = sys.argv[1] - else: filename = 'film.video' - vin = VinFile(filename) - vin.printinfo() - gl.foreground() - gl.prefsize(vin.getsize()) - wid = gl.winopen(filename) - vin.initcolormap() - t0 = time.time() - while 1: - try: t, data, cdata = vin.getnextframe() - except EOFError: break - dt = t0 + t - time.time() - if dt > 0: time.time(dt) - vin.showframe(data, cdata) - time.sleep(2) diff --git a/Demo/sgi/video/VGrabber.py b/Demo/sgi/video/VGrabber.py deleted file mode 100755 index 242ebf2..0000000 --- a/Demo/sgi/video/VGrabber.py +++ /dev/null @@ -1,80 +0,0 @@ -# Class to grab frames from a window. -# (This has fewer user-settable parameters than Displayer.) -# It is the caller's responsibility to initialize the window and to -# ensure that it is current when using grabframe() - -import gl, GL -import VFile -import GET -from VFile import Error - -class VGrabber(VFile.VideoParams): - - # XXX The constructor of VideoParams is just fine, for now - - # Grab a frame. - # Return (data, chromdata) just like getnextframe(). - - def grabframe(self): - grabber = choose_grabber(self.format) - return grabber(self.width, self.height, self.packfactor) - - -# Choose one of the grabber functions below based upon a color system name - -def choose_grabber(format): - try: - return eval('grab_' + format) - except: - raise Error, 'Unknown color system: ' + `format` - - -# Routines to grab data, per color system (only a few really supported). -# (These functions are used via eval with a constructed argument!) - -def grab_rgb(w, h, pf): - if gl.getdisplaymode() <> GET.DMRGB: - raise Error, 'Sorry, can only grab rgb in single-buf rgbmode' - if pf <> (1, 1): - raise Error, 'Sorry, only grab rgb with packfactor (1,1)' - return gl.lrectread(0, 0, w-1, h-1), None - -def grab_rgb8(w, h, pf): - if gl.getdisplaymode() <> GET.DMRGB: - raise Error, 'Sorry, can only grab rgb8 in single-buf rgbmode' - if pf <> (1, 1): - raise Error, 'Sorry, can only grab rgb8 with packfactor (1,1)' - if not VFile.is_entry_indigo(): - raise Error, 'Sorry, can only grab rgb8 on entry level Indigo' - # XXX Dirty Dirty here. - # XXX Set buffer to cmap mode, grab image and set it back. - gl.cmode() - gl.gconfig() - gl.pixmode(GL.PM_SIZE, 8) - data = gl.lrectread(0, 0, w-1, h-1) - data = data[:w*h] # BUG FIX for python lrectread - gl.RGBmode() - gl.gconfig() - gl.pixmode(GL.PM_SIZE, 32) - return data, None - -def grab_grey(w, h, pf): - raise Error, 'Sorry, grabbing grey not implemented' - -def grab_yiq(w, h, pf): - raise Error, 'Sorry, grabbing yiq not implemented' - -def grab_hls(w, h, pf): - raise Error, 'Sorry, grabbing hls not implemented' - -def grab_hsv(w, h, pf): - raise Error, 'Sorry, grabbing hsv not implemented' - -def grab_jpeg(w, h, pf): - data, dummy = grab_rgb(w, h, pf) - import jpeg - data = jpeg.compress(data, w, h, 4) - return data, None - -def grab_jpeggrey(w, h, pf): - raise Error, 'sorry, grabbing jpeggrey not implemented' diff --git a/Demo/sgi/video/Vaddcache.py b/Demo/sgi/video/Vaddcache.py deleted file mode 100755 index 4c8fdac..0000000 --- a/Demo/sgi/video/Vaddcache.py +++ /dev/null @@ -1,80 +0,0 @@ -#! /usr/bin/env python - -# Add a cache to each of the files given as command line arguments - - -# Usage: -# -# Vaddcache [file] ... - - -# Options: -# -# file ... : file(s) to modify; default film.video - - -import sys -sys.path.append('/ufs/guido/src/video') -import VFile -import getopt - - -# Global options - -# None - - -# Main program -- mostly command line parsing - -def main(): - opts, args = getopt.getopt(sys.argv[1:], '') - if not args: - args = ['film.video'] - sts = 0 - for filename in args: - if process(filename): - sts = 1 - sys.exit(sts) - - -# Process one file - -def process(filename): - try: - fp = open(filename, 'r+') - vin = VFile.RandomVinFile(fp) - vin.filename = filename - except IOError, msg: - sys.stderr.write(filename + ': I/O error: ' + `msg` + '\n') - return 1 - except VFile.Error, msg: - sys.stderr.write(msg + '\n') - return 1 - except EOFError: - sys.stderr.write(filename + ': EOF in video file\n') - return 1 - - try: - vin.readcache() - hascache = 1 - except VFile.Error: - hascache = 0 - - if hascache: - sys.stderr.write(filename + ': already has a cache\n') - vin.close() - return 1 - - vin.printinfo() - vin.warmcache() - vin.writecache() - vin.close() - return 0 - - -# Don't forget to call the main program - -try: - main() -except KeyboardInterrupt: - print '[Interrupt]' diff --git a/Demo/sgi/video/Vb.py b/Demo/sgi/video/Vb.py deleted file mode 100755 index e1b06d6..0000000 --- a/Demo/sgi/video/Vb.py +++ /dev/null @@ -1,962 +0,0 @@ -#! /usr/bin/env python - -# Video bag of tricks: record video(+audio) in various formats and modes - -# XXX To do: -# - audio -# - improve user interface -# - help button? -# - command line options to set initial settings -# - save settings in a file -# - ...? - -import sys -import time -import getopt -import string -import os -sts = os.system('makemap') # Must be before "import fl" to work -import sgi -import gl -import GL -import DEVICE -import fl -import FL -import flp -import watchcursor -import sv -import SV -import VFile -import VGrabber -import imageop -sys.path.append('/ufs/jack/src/av/vcr') -import VCR -try: - import cl -except ImportError: - cl = None - -ARROW = 0 -WATCH = 1 -watchcursor.defwatch(WATCH) - -def main(): -## fl.set_graphics_mode(0, 1) - vb = VideoBagOfTricks() - while 1: - dummy = fl.do_forms() - [dummy] - -StopCapture = 'StopCapture' - -VideoFormatLabels = ['Video off', 'rgb8', 'grey8', 'grey4', 'grey2', \ - 'grey2 dith', 'mono dith', 'mono thresh', 'rgb24', 'rgb24-jpeg', \ - 'compress'] -VideoFormats = ['', 'rgb8', 'grey', 'grey4', 'grey2', \ - 'grey2', 'mono', 'mono', 'rgb', 'jpeg', 'compress'] - -VideoModeLabels = ['Continuous', 'Burst', 'Single frame', 'VCR sync'] -[VM_CONT, VM_BURST, VM_SINGLE, VM_VCR] = range(1, 5) - -AudioFormatLabels = ['Audio off', \ - '16 bit mono', '16 bit stereo', '8 bit mono', '8 bit stereo'] -[A_OFF, A_16_MONO, A_16_STEREO, A_8_MONO, A_8_STEREO] = range(1, 6) - -VcrSpeedLabels = ['normal', '1/3', '1/5', '1/10', '1/30', 'single-step'] -VcrSpeeds = [None, 5, 4, 3, 2, 1, 0] - -RgbSizeLabels = ['full', 'quarter', 'sixteenth'] - -# init file stuff: -if os.environ.has_key('HOME'): - HOME=os.environ['HOME'] -else: - HOME='.' -VB_INIT_FILE=HOME + '/.Vb_init' - -VB_INIT_KEYS=['vfile', 'vmode', 'mono_thresh', 'vformat', 'comp_scheme', \ - 'rgb24_size', 'afile', 'aformat'] - -class VideoBagOfTricks: - - # Init/close stuff - - def __init__(self): - self.window = None - formdef = flp.parse_form('VbForm', 'form') - flp.create_full_form(self, formdef) - self.setdefaults() - if self.vmode <> VM_CONT: - self.g_cont.hide_object() - if self.vmode <> VM_BURST: - self.g_burst.hide_object() - if self.vmode <> VM_SINGLE: - self.g_single.hide_object() - if self.vmode <> VM_VCR: - self.g_vcr.hide_object() - if self.vformat <> 'compress': - self.g_compress.hide_object() - - self.openvideo() - self.makewindow() - self.bindvideo() - if self.use_24: - self.optfullsizewindow() - self.showform() - fl.set_event_call_back(self.do_event) - - def close(self): - self.close_video() - self.close_audio() - self.savedefaults() - raise SystemExit, 0 - - def showform(self): - # Get position of video window - gl.winset(self.window) - x, y = gl.getorigin() - width, height = gl.getsize() - # Calculate position of form window - x1 = x + width + 10 - x2 = x1 + int(self.form.w) - 1 - y2 = y + height - 1 - y1 = y2 - int(self.form.h) + 1 - # Position and show form window - gl.prefposition(x1, x2, y1, y2) - self.form.show_form(FL.PLACE_FREE, FL.TRUE, 'Vb Control') - - def getdefaultdefaults(self): - # Video defaults - self.vfile = 'film.video' - self.vmode = VM_CONT - self.mono_thresh = 128 - self.vformat = 'rgb8' - self.comp_scheme = 'Uncompressed' - self.rgb24_size = 1 - # Missing: drop, rate, maxmem, nframes, rate, vcrspeed - # Audio defaults: - self.afile = 'film.aiff' - self.aformat = A_OFF - - def getdefaults(self): - self.getdefaultdefaults() - # XXXX Read defaults file and override. - try: - fp = open(VB_INIT_FILE, 'r') - except IOError: - print 'Vb: no init file' - self.initcont = {} - return - data = fp.read(1000000) - try: - self.initcont = eval(data) - except: - print 'Vb: Ill-formatted init file' - self.initcont = {} - for k in self.initcont.keys(): - if hasattr(self, k): - setattr(self, k, self.initcont[k]) - - def savedefaults(self): - newdb = {} - for k in VB_INIT_KEYS: - newdb[k] = getattr(self, k) - if newdb <> self.initcont: - try: - fp = open(VB_INIT_FILE, 'w') - except IOError: - print 'Vb: Cannot create', VB_INIT_FILE - return - fp.write(`newdb`) - fp.close() - - def setdefaults(self): - self.getdefaults() - self.vcr = None - self.vout = None - self.capturing = 0 - self.c_vformat.clear_choice() - for label in VideoFormatLabels: - self.c_vformat.addto_choice(label) - self.c_vformat.set_choice(1 + VideoFormats.index(self.vformat)) - self.c_vmode.clear_choice() - for label in VideoModeLabels: - self.c_vmode.addto_choice(label) - self.c_vmode.set_choice(self.vmode) - self.get_vformat() - self.b_drop.set_button(1) - self.in_rate.set_input('2') - self.in_maxmem.set_input('1.0') - self.in_nframes.set_input('0') - self.in_nframes_vcr.set_input('1') - self.in_rate_vcr.set_input('1') - self.c_vcrspeed.clear_choice() - for label in VcrSpeedLabels: - self.c_vcrspeed.addto_choice(label) - self.c_vcrspeed.set_choice(4) - self.c_rgb24_size.clear_choice() - for label in RgbSizeLabels: - self.c_rgb24_size.addto_choice(label) - self.c_rgb24_size.set_choice(self.rgb24_size) - if cl: - algs = cl.QueryAlgorithms(cl.VIDEO) - self.all_comp_schemes = [] - for i in range(0, len(algs), 2): - if algs[i+1] in (cl.COMPRESSOR, cl.CODEC): - self.all_comp_schemes.append(algs[i]) - self.c_cformat.clear_choice() - for label in self.all_comp_schemes: - self.c_cformat.addto_choice(label) - i = self.all_comp_schemes.index(self.comp_scheme) - self.c_cformat.set_choice(i+1) - # Audio defaults - self.aout = None - self.aport = None - self.c_aformat.clear_choice() - for label in AudioFormatLabels: - self.c_aformat.addto_choice(label) - self.c_aformat.set_choice(self.aformat) - self.get_aformat() - - def openvideo(self): - try: - self.video = sv.OpenVideo() - except sv.error, msg: - print 'Error opening video:', msg - self.video = None - param = [SV.BROADCAST, SV.PAL] - if self.video: self.video.GetParam(param) - if param[1] == SV.PAL: - x = SV.PAL_XMAX - y = SV.PAL_YMAX - elif param[1] == SV.NTSC: - x = SV.NTSC_XMAX - y = SV.NTSC_YMAX - else: - print 'Unknown video standard:', param[1] - sys.exit(1) - self.maxx, self.maxy = x, y - self.curx = 256 - self.cury = 256*3/4 - - def makewindow(self): - x, y = self.maxx, self.maxy - gl.foreground() - gl.maxsize(x, y) - gl.keepaspect(x, y) - gl.stepunit(8, 6) - width = self.curx - height = self.cury - if width and height: - # Place the window at (150, 150) from top left - # (the video board likes this location...) - x1 = 150 - x2 = x1+width-1 - SCRHEIGHT = 768 - y2 = SCRHEIGHT-1-150 - y1 = y2-height+1 - gl.prefposition(x1, x2, y1, y2) - self.window = gl.winopen('Vb video') - self.settitle() - if width: - gl.maxsize(x, y) - gl.keepaspect(x, y) - gl.stepunit(8, 6) - gl.winconstraints() - gl.qdevice(DEVICE.LEFTMOUSE) - gl.qdevice(DEVICE.WINQUIT) - gl.qdevice(DEVICE.WINSHUT) - - def optfullsizewindow(self): - if not self.window: - return - gl.winset(self.window) - if self.use_24: - x, y = self.maxx, self.maxy - else: - x, y = self.curx, self.cury - left, bottom = gl.getorigin() - width, height = gl.getsize() - bottom = bottom+height-y - gl.prefposition(left, left+x-1, bottom, bottom+y-1) - gl.winconstraints() - if not self.use_24: - gl.keepaspect(x, y) - gl.stepunit(8, 6) - gl.maxsize(self.maxx, self.maxy) - gl.winconstraints() - self.bindvideo() - - def bindvideo(self): - if not self.video: return - x, y = gl.getsize() - if not self.use_24: - self.curx, self.cury = x, y - self.video.SetSize(x, y) - drop = self.b_drop.get_button() - if drop: - param = [SV.FIELDDROP, 1, SV.GENLOCK, SV.GENLOCK_OFF] - else: - param = [SV.FIELDDROP, 0, SV.GENLOCK, SV.GENLOCK_ON] - if self.rgb: - param = param+[SV.COLOR, SV.DEFAULT_COLOR, \ - SV.DITHER, 1, \ - SV.INPUT_BYPASS, 0] - else: - param = param+[SV.COLOR, SV.MONO, SV.DITHER, 0, \ - SV.INPUT_BYPASS, 1] - self.video.BindGLWindow(self.window, SV.IN_REPLACE) - self.video.SetParam(param) - - def rebindvideo(self): - gl.winset(self.window) - self.bindvideo() - - def reset(self): - self.close_video() - self.close_audio() - if self.vcr: - try: - ok = self.vcr.still() - except VCR.error: - pass - self.vcr = None - self.b_capture.set_button(0) - - # Event handler (catches resize of video window) - - def do_event(self, dev, val): - #print 'Event:', dev, val - if dev in (DEVICE.WINSHUT, DEVICE.WINQUIT): - self.close() - if dev == DEVICE.REDRAW and val == self.window: - self.rebindvideo() - self.settitle() - - # Video controls: format, mode, file - - def cb_vformat(self, *args): - self.reset() - self.get_vformat() - if self.mono_use_thresh: - s = `self.mono_thresh` - s = fl.show_input('Please enter mono threshold', s) - if s: - try: - self.mono_thresh = string.atoi(s) - except string.atoi_error: - fl.show_message('Bad input, using', \ - `self.mono_thresh`, '') - self.rebindvideo() - - def cb_cformat(self, *args): - i = self.c_cformat.get_choice() - self.comp_scheme = self.all_comp_schemes[i-1] - - - def cb_vmode(self, *args): - if self.vcr: - self.vcr = None - self.vmode = self.c_vmode.get_choice() - self.form.freeze_form() - self.g_cont.hide_object() - self.g_burst.hide_object() - self.g_single.hide_object() - self.g_vcr.hide_object() - if self.vmode == VM_CONT: - self.g_cont.show_object() - elif self.vmode == VM_BURST: - self.g_burst.show_object() - elif self.vmode == VM_SINGLE: - self.g_single.show_object() - elif self.vmode == VM_VCR: - self.g_vcr.show_object() - self.form.unfreeze_form() - - def cb_vfile(self, *args): - filename = self.vfile - hd, tl = os.path.split(filename) - filename = fl.file_selector('Video save file:', hd, '', tl) - if filename: - self.reset() - hd, tl = os.path.split(filename) - if hd == os.getcwd(): - filename = tl - self.vfile = filename - - # Video mode specific video controls - - def cb_rate(self, *args): - pass - - def cb_drop(self, *args): - self.rebindvideo() - - def cb_maxmem(self, *args): - pass - - def cb_nframes(self, *args): - pass - - def cb_fps(self, *args): - pass - - def cb_nframes_vcr(self, *args): - pass - - def cb_rate_vcr(self, *args): - pass - - def cb_vcrspeed(self, *args): - pass - - def cb_rgb24_size(self, *args): - i = self.c_rgb24_size.get_choice() - if i: - self.rgb24_size = i - - # Audio controls: format, file - - def cb_aformat(self, *args): - self.get_aformat() - - def cb_afile(self, *args): - filename = self.afile - hd, tl = os.path.split(filename) - filename = fl.file_selector('Audio save file:', hd, '', tl) - if filename: - self.reset() - hd, tl = os.path.split(filename) - if hd == os.getcwd(): - filename = tl - self.afile = filename - - # General controls: capture, reset, play, quit - - def cb_capture(self, *args): - if self.capturing: - raise StopCapture - if not self.b_capture.get_button(): - return - if not self.video or not self.vformat: - gl.ringbell() - return - if self.vmode == VM_CONT: - self.cont_capture() - elif self.vmode == VM_BURST: - self.burst_capture() - elif self.vmode == VM_SINGLE: - self.single_capture(None, None) - elif self.vmode == VM_VCR: - self.vcr_capture() - - def cb_reset(self, *args): - self.reset() - - def cb_play(self, *args): - self.reset() - sts = os.system('Vplay -q ' + self.vfile + ' &') - - def cb_quit(self, *args): - self.close() - - # Capture routines - - def burst_capture(self): - self.setwatch() - gl.winset(self.window) - x, y = gl.getsize() - if self.use_24: - fl.show_message('Sorry, no 24 bit continuous capture yet', '', '') - return - vformat = SV.RGB8_FRAMES - nframes = self.getint(self.in_nframes, 0) - if nframes == 0: - maxmem = self.getint(self.in_maxmem, 1.0) - memsize = int(maxmem * 1024 * 1024) - nframes = self.calcnframes(memsize) - info = (vformat, x, y, nframes, 1) - try: - info2, data, bitvec = self.video.CaptureBurst(info) - except sv.error, msg: - self.b_capture.set_button(0) - self.setarrow() - fl.show_message('Capture error:', str(msg), '') - return - if info <> info2: print info, '<>', info2 - self.save_burst(info2, data, bitvec) - self.setarrow() - - def calcnframes(self, memsize): - gl.winset(self.window) - x, y = gl.getsize() - pixels = x*y - pixels = pixels/2 # XXX always assume fields - if self.mono or self.grey: - n = memsize/pixels - else: - n = memsize/(4*pixels) - return max(1, n) - - def save_burst(self, info, data, bitvec): - (vformat, x, y, nframes, rate) = info - self.open_if_closed() - fieldsize = x*y/2 - nskipped = 0 - realframeno = 0 - tpf = 1000 / 50.0 # XXX - for frameno in range(0, nframes*2): - if frameno <> 0 and \ - bitvec[frameno] == bitvec[frameno-1]: - nskipped = nskipped + 1 - continue - # - # Save field. - # XXX Works only for fields and top-to-bottom - # - start = frameno*fieldsize - field = data[start:start+fieldsize] - realframeno = realframeno + 1 - fn = int(realframeno*tpf) - if not self.write_frame(fn, field): - break - - def cont_capture(self): - saved_label = self.b_capture.label - self.b_capture.label = 'Stop\n' + saved_label - self.open_if_closed() - self.init_cont() - fps = 59.64 # Fields per second - # XXX (fps of Indigo monitor, not of PAL or NTSC!) - tpf = 1000.0 / fps # Time per field in msec - self.capturing = 1 - self.start_audio() - while 1: - try: - void = fl.check_forms() - except StopCapture: - break - try: - cd, id = self.video.GetCaptureData() - except sv.error: - sgi.nap(1) - continue - id = id + 2*self.rate - data = cd.InterleaveFields(1) - cd.UnlockCaptureData() - t = id*tpf - if not self.write_frame(t, data): - break - self.stop_audio() - self.capturing = 0 - self.end_cont() - if self.aout: - # If recording audio, can't capture multiple sequences - self.reset() - self.b_capture.label = saved_label - - def single_capture(self, stepfunc, timecode): - self.open_if_closed() - self.init_cont() - while 1: - try: - cd, id = self.video.GetCaptureData() - break - except sv.error: - pass - sgi.nap(1) - if stepfunc: # This might step the video - d=stepfunc() # to the next frame - if not self.use_24: - data = cd.InterleaveFields(1) - else: - x, y = self.vout.getsize() - if self.use_compress: - if self.rgb24_size == 1: - data = cd.YUVtoYUV422DC(0) - elif self.rgb24_size == 2: - data = cd.YUVtoYUV422DC_quarter(1) - x = x/2 - y = y/2 - elif self.rgb24_size == 3: - data = cd.YUVtoYUV422DC_sixteenth(1) - x = x/4 - y = y/4 - else: - data = cd.YUVtoRGB(1) - if self.maxx*self.maxy*4 <> len(data): - print 'maxx,maxy,exp,got=', self.maxx, - print self.maxy,self.maxx*self.maxy*4, - print len(data) - fl.showmessage('Wrong sized data') - return 0 - if self.rgb24_size <> 1: - data = imageop.scale(data, 4, \ - self.maxx, self.maxy, x, y) - if self.use_jpeg: - import jpeg - data = jpeg.compress(data, x, y, 4) - if self.use_compress: - data = self.compressor.Compress(1, data) - cd.UnlockCaptureData() - self.end_cont() - if timecode == None: - timecode = (self.nframes+1) * (1000/25) - return self.write_frame(timecode, data) - - def vcr_capture(self): - if not self.vcr: - try: - print 'Connecting to VCR ...' - self.vcr = VCR.VCR() - print 'Waiting for VCR to come online ...' - self.vcr.initvcr() - print 'Preparing VCR ...' - if not (self.vcr.fmmode('dnr') and \ - self.vcr.dmcontrol('digital slow')): - self.vcr_error('digital slow failed') - return - print 'VCR OK.' - except VCR.error, msg: - self.vcr = None - self.vcr_error(msg) - return - if not self.vcr.still(): - self.vcr_error('still failed') - return - self.open_if_closed() - rate = self.getint(self.in_rate_vcr, 1) - rate = max(rate, 1) - vcrspeed = self.c_vcrspeed.get_choice() - vcrspeed = VcrSpeeds[vcrspeed] - if vcrspeed == 0: - stepfunc = self.vcr.step - else: - stepfunc = None - self.speed_factor = rate - addr = start_addr = self.vcr.sense() - if not self.single_capture(None, 0): - return - print 'captured %02d:%02d:%02d:%02d' % self.vcr.addr2tc(addr) - count = self.getint(self.in_nframes_vcr, 1) - 1 - if count <= 0: - while rate > 0: - if not self.vcr.step(): - self.vcr_error('step failed') - here = self.vcr.sense() - if here > addr: - rate = rate - (here - addr) - addr = here - return - if not self.vcr.fwdshuttle(vcrspeed): - self.vcr_error('fwd shuttle failed') - return - cycle = 0 - while count > 0: - try: - here = self.vcr.sense() - except VCR.error, msg: - self.vcr_error(msg) - break - if here <> addr: - if here <> addr+1: - print 'Missed', here-addr-1, - print 'frame' + 's'*(here-addr-1 <> 1) - cycle = (cycle+1) % rate - if cycle == 0: - tc = (here-start_addr)*40 - if not self.single_capture(stepfunc, \ - tc): - break - print 'captured %02d:%02d:%02d:%02d' \ - % self.vcr.addr2tc(here) - count = count -1 - addr = here - if self.vcr and not self.vcr.still(): - self.vcr_error('still failed') - - def vcr_error(self, msg): - self.reset() - fl.show_message('VCR error:', str(msg), '') - - # Init/end continuous capture mode - - def init_cont(self): - qsize = 1 - if self.vmode == VM_CONT: - self.rate = self.getint(self.in_rate, 2) - else: - self.rate = 2 - x, y = self.vout.getsize() - if self.use_24: - info = (SV.YUV411_FRAMES, x, y, qsize, self.rate) - else: - info = (SV.RGB8_FRAMES, x, y, qsize, self.rate) - info2 = self.video.InitContinuousCapture(info) - if info2 <> info: - # XXX This is really only debug info - print 'Info mismatch: requested', info, 'got', info2 - - def end_cont(self): - self.video.EndContinuousCapture() - - # Misc stuff - - def settitle(self): - gl.winset(self.window) - x, y = gl.getsize() - title = 'Vb ' + self.vfile + ' (%dx%d)' % (x, y) - gl.wintitle(title) - - def get_vformat(self): - i = self.c_vformat.get_choice() - label = VideoFormatLabels[i-1] - format = VideoFormats[i-1] - if format == 'compress' and cl == None: - fl.show_message('Sorry, no compression library support') - format = '' - label = 'Video off' - self.vformat = format - if self.vformat == '': - self.form.freeze_form() - self.g_video.hide_object() - self.g_cont.hide_object() - self.g_burst.hide_object() - self.g_single.hide_object() - self.form.unfreeze_form() - else: - self.g_video.show_object() - if self.vmode == VM_CONT: - self.g_cont.show_object() - elif self.vmode == VM_BURST: - self.g_burst.show_object() - elif self.vmode == VM_SINGLE: - self.g_single.show_object() - # - self.rgb = (format[:3] == 'rgb' or format == 'compress') - self.mono = (format == 'mono') - self.grey = (format[:4] == 'grey') - self.use_24 = (format in ('rgb', 'jpeg', 'compress')) - if self.use_24: - self.g_rgb24.show_object() - else: - self.g_rgb24.hide_object() - self.use_jpeg = (format == 'jpeg') - self.mono_use_thresh = (label == 'mono thresh') - self.use_compress = (format == 'compress') - if self.use_compress: - self.g_compress.show_object() - else: - self.g_compress.hide_object() - s = format[4:] - if self.grey and s: - self.greybits = string.atoi(s) - else: - self.greybits = 8 - if label == 'grey2 dith': - self.greybits = -2 - # - convertor = None - if self.grey: - if self.greybits == 2: - convertor = imageop.grey2grey2 - elif self.greybits == 4: - convertor = imageop.grey2grey4 - elif self.greybits == -2: - convertor = imageop.dither2grey2 - self.convertor = convertor - self.optfullsizewindow() - - def get_aformat(self): - self.reset() - self.aformat = self.c_aformat.get_choice() - if self.aformat == A_OFF: - self.g_audio.hide_object() - else: - self.g_audio.show_object() - - def init_compressor(self, w, h): - self.compressor = None - scheme = cl.QuerySchemeFromName(cl.VIDEO, self.comp_scheme) - self.compressor = cl.OpenCompressor(scheme) - parambuf = [cl.IMAGE_WIDTH, w, \ - cl.IMAGE_HEIGHT, h, \ - cl.ORIGINAL_FORMAT, cl.YUV422DC] - self.compressor.SetParams(parambuf) - return self.compressor.Compress(0, '') - - def open_if_closed(self): - if not self.vout: - self.open_video() - if not self.aout: - self.open_audio() - - # File I/O handling - - def open_video(self): - self.close_video() - gl.winset(self.window) - x, y = gl.getsize() - if self.use_24: - if self.rgb24_size == 2: - x, y = x/2, y/2 - elif self.rgb24_size == 3: - x, y = x/4, y/4 - vout = VFile.VoutFile(self.vfile) - vout.setformat(self.vformat) - if self.vformat == 'compress': - cheader = self.init_compressor(x, y) - vout.setcompressheader(cheader) - vout.setsize(x, y) - if self.vmode == VM_BURST: - vout.setpf((1, -2)) - vout.writeheader() - self.vout = vout - self.nframes = 0 - self.speed_factor = 1 - self.t_nframes.label = `self.nframes` - - def write_frame(self, t, data): - t = t * self.speed_factor - if not self.vout: - gl.ringbell() - return 0 - if self.convertor: - data = self.convertor(data, len(data), 1) - elif self.mono: - if self.mono_use_thresh: - data = imageop.grey2mono(data, \ - len(data), 1,\ - self.mono_thresh) - else: - data = imageop.dither2mono(data, \ - len(data), 1) - try: - self.vout.writeframe(int(t), data, None) - except IOError, msg: - self.reset() - if msg == (0, 'Error 0'): - msg = 'disk full??' - fl.show_message('IOError', str(msg), '') - return 0 - self.nframes = self.nframes + 1 - self.t_nframes.label = `self.nframes` - return 1 - - def close_video(self): - if not self.vout: - return - self.nframes = 0 - self.t_nframes.label = '' - try: - self.vout.close() - except IOError, msg: - if msg == (0, 'Error 0'): - msg = 'disk full??' - fl.show_message('IOError', str(msg), '') - self.vout = None - self.compressor = None - - # Watch cursor handling - - def setwatch(self): - gl.winset(self.form.window) - gl.setcursor(WATCH, 0, 0) - gl.winset(self.window) - gl.setcursor(WATCH, 0, 0) - - def setarrow(self): - gl.winset(self.form.window) - gl.setcursor(ARROW, 0, 0) - gl.winset(self.window) - gl.setcursor(ARROW, 0, 0) - - # Numeric field handling - - def getint(self, field, default): - try: - value = string.atoi(field.get_input()) - except string.atoi_error: - value = default - field.set_input(`value`) - return value - - def getfloat(self, field, default): - try: - value = float(eval(field.get_input())) - except: - value = float(default) - field.set_input(`value`) - return value - - # Audio stuff - - def open_audio(self): - if self.aformat == A_OFF: - return - import aifc - import al - import AL - import thread - self.close_audio() - params = [AL.INPUT_RATE, 0] - al.getparams(AL.DEFAULT_DEVICE, params) - rate = params[1] - self.aout = aifc.open(self.afile, 'w') - if self.aformat in (A_16_STEREO, A_8_STEREO): - nch = AL.STEREO - else: - nch = AL.MONO - if self.aformat in (A_16_STEREO, A_16_MONO): - width = AL.SAMPLE_16 - else: - width = AL.SAMPLE_8 - self.aout.setnchannels(nch) - self.aout.setsampwidth(width) - self.aout.setframerate(rate) - c = al.newconfig() - c.setqueuesize(8000) - c.setchannels(nch) - c.setwidth(width) - self.aport = al.openport('Vb audio record', 'r', c) - self.audio_stop = 0 - self.audio_ok = 0 - self.audio_busy = 1 - thread.start_new_thread(self.record_audio, ()) - - def start_audio(self): - if self.aformat == A_OFF: - return - self.audio_ok = 1 - - def record_audio(self, *args): - # This function runs in a separate thread - # Currently no semaphores are used - while not self.audio_stop: - data = self.aport.readsamps(4000) - if self.audio_ok: - self.aout.writeframes(data) - data = None - self.audio_busy = 0 - - def stop_audio(self): - self.audio_ok = 0 - - def close_audio(self): - if self.aout: - self.audio_ok = 0 - self.audio_stop = 1 - while self.audio_busy: - time.sleep(0.1) - self.aout.close() - self.aout = None - if self.aport: - self.aport.closeport() - self.aport = None - - -try: - main() -except KeyboardInterrupt: - print '[Interrupt]' - sys.exit(1) diff --git a/Demo/sgi/video/VbForm.fd b/Demo/sgi/video/VbForm.fd deleted file mode 100644 index fd9759f..0000000 --- a/Demo/sgi/video/VbForm.fd +++ /dev/null @@ -1,615 +0,0 @@ -Magic: 12321 - -Internal Form Definition File - (do not change) - -Number of forms: 1 - -=============== FORM =============== -Name: form -Width: 450.000000 -Height: 260.000000 -Number of Objects: 40 - --------------------- -class: 1 -type: 1 -box: 0.000000 0.000000 450.000000 260.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 11 -type: 5 -box: 330.000000 150.000000 110.000015 60.000004 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 1 -size: 11.000000 -lcol: 0 -label: Capture -name: b_capture -callback: cb_capture -argument: 0 - --------------------- -class: 11 -type: 0 -box: 330.000000 10.000000 110.000008 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Quit -name: b_quit -callback: cb_quit -argument: 0 - --------------------- -class: 11 -type: 0 -box: 330.000000 50.000000 110.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Playback -name: b_play -callback: cb_play -argument: 0 - --------------------- -class: 42 -type: 0 -box: 80.000000 220.000000 120.000000 30.000000 -boxtype: 5 -colors: 7 0 -alignment: 2 -style: 0 -size: 11.000000 -lcol: 0 -label: Format: -name: c_vformat -callback: cb_vformat -argument: 0 - --------------------- -class: 11 -type: 0 -box: 330.000000 220.000000 110.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Reset -name: b_reset -callback: cb_reset -argument: 0 - --------------------- -class: 42 -type: 0 -box: 80.000000 50.000000 120.000000 30.000000 -boxtype: 5 -colors: 7 0 -alignment: 2 -style: 0 -size: 11.000000 -lcol: 0 -label: Format: -name: c_aformat -callback: cb_aformat -argument: 0 - --------------------- -class: 10000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 1668246586 540019308 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: g_audio -callback: -argument: - --------------------- -class: 11 -type: 0 -box: 10.000000 10.000000 190.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Set audio file... -name: b_afile -callback: cb_afile -argument: 0 - --------------------- -class: 20000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 876099360 892416522 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 10000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 1147496041 1852404841 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: g_video -callback: -argument: - --------------------- -class: 42 -type: 0 -box: 80.000000 180.000000 120.000000 30.000000 -boxtype: 5 -colors: 7 0 -alignment: 2 -style: 0 -size: 11.000000 -lcol: 0 -label: Mode: -name: c_vmode -callback: cb_vmode -argument: 0 - --------------------- -class: 11 -type: 0 -box: 10.000000 90.000000 190.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Set video file... -name: b_vfile -callback: cb_vfile -argument: 0 - --------------------- -class: 20000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 544171552 1331849829 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 10000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 0 0 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: g_single -callback: -argument: - --------------------- -class: 31 -type: 2 -box: 220.000000 150.000000 100.000000 30.000000 -boxtype: 2 -colors: 13 5 -alignment: 0 -style: 0 -size: 11.000000 -lcol: 0 -label: Frames/sec -name: in_fps -callback: cb_fps -argument: 0 - --------------------- -class: 20000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 0 0 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 10000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 0 0 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: g_burst -callback: -argument: - --------------------- -class: 31 -type: 1 -box: 220.000000 150.000000 100.000000 30.000000 -boxtype: 2 -colors: 13 5 -alignment: 0 -style: 0 -size: 11.000000 -lcol: 0 -label: Max Mbytes: -name: in_maxmem -callback: cb_maxmem -argument: 0 - --------------------- -class: 31 -type: 2 -box: 220.000000 90.000000 100.000000 30.000000 -boxtype: 2 -colors: 13 5 -alignment: 0 -style: 0 -size: 11.000000 -lcol: 0 -label: Nr. of frames: -name: in_nframes -callback: cb_nframes -argument: 0 - --------------------- -class: 20000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 0 0 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 10000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 0 0 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: g_cont -callback: -argument: - --------------------- -class: 31 -type: 2 -box: 250.000000 150.000000 40.000000 30.000000 -boxtype: 2 -colors: 13 5 -alignment: 0 -style: 0 -size: 11.000000 -lcol: 0 -label: Capture rate: -name: in_rate -callback: cb_rate -argument: 0 - --------------------- -class: 2 -type: 0 -box: 220.000000 150.000000 30.000000 30.000000 -boxtype: 0 -colors: 47 47 -alignment: 2 -style: 0 -size: 11.000000 -lcol: 0 -label: 1/ -name: -callback: -argument: - --------------------- -class: 2 -type: 0 -box: 290.000000 150.000000 30.000000 30.000000 -boxtype: 0 -colors: 47 47 -alignment: 2 -style: 0 -size: 11.000000 -lcol: 0 -label: fr -name: -callback: -argument: - --------------------- -class: 13 -type: 0 -box: 220.000000 90.000000 100.000000 30.000000 -boxtype: 0 -colors: 7 3 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Fielddrop -name: b_drop -callback: cb_drop -argument: 0 - --------------------- -class: 20000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 0 0 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 2 -type: 0 -box: 330.000000 90.000000 110.000000 30.000002 -boxtype: 2 -colors: 47 47 -alignment: 2 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: t_nframes -callback: -argument: - --------------------- -class: 2 -type: 0 -box: 330.000000 120.000000 110.000000 30.000000 -boxtype: 0 -colors: 47 47 -alignment: 2 -style: 0 -size: 11.000000 -lcol: 0 -label: Frames done: -name: -callback: -argument: - --------------------- -class: 10000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 640 235 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: g_vcr -callback: -argument: - --------------------- -class: 31 -type: 2 -box: 220.000000 90.000000 100.000000 30.000000 -boxtype: 2 -colors: 13 5 -alignment: 0 -style: 0 -size: 11.000000 -lcol: 0 -label: # frames wtd: -name: in_nframes_vcr -callback: cb_nframes_vcr -argument: 0 - --------------------- -class: 31 -type: 2 -box: 220.000000 150.000000 100.000000 30.000000 -boxtype: 2 -colors: 13 5 -alignment: 0 -style: 0 -size: 11.000000 -lcol: 0 -label: Sample rate: -name: in_rate_vcr -callback: cb_rate_vcr -argument: 0 - --------------------- -class: 42 -type: 0 -box: 220.000000 10.000000 100.000000 30.000000 -boxtype: 5 -colors: 7 0 -alignment: 0 -style: 0 -size: 11.000000 -lcol: 0 -label: VCR speed: -name: c_vcrspeed -callback: cb_vcrspeed -argument: 0 - --------------------- -class: 20000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 640 235 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 10000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 58720287 33751040 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: g_rgb24 -callback: -argument: - --------------------- -class: 42 -type: 0 -box: 260.000000 220.000000 60.000000 30.000000 -boxtype: 5 -colors: 7 0 -alignment: 2 -style: 0 -size: 11.000000 -lcol: 0 -label: Size: -name: c_rgb24_size -callback: cb_rgb24_size -argument: 0 - --------------------- -class: 20000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 0 0 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 10000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 0 0 -alignment: 4 -style: 0 -size: 10.000000 -lcol: 0 -label: -name: g_compress -callback: -argument: - --------------------- -class: 42 -type: 0 -box: 80.000000 140.000000 120.000000 30.000000 -boxtype: 5 -colors: 7 0 -alignment: 2 -style: 0 -size: 11.000000 -lcol: 0 -label: Scheme: -name: c_cformat -callback: cb_cformat -argument: 0 - --------------------- -class: 20000 -type: 0 -box: 0.000000 0.000000 0.000000 0.000000 -boxtype: 0 -colors: 0 0 -alignment: 4 -style: 0 -size: 10.000000 -lcol: 0 -label: -name: -callback: -argument: - -============================== -create_the_forms diff --git a/Demo/sgi/video/Vcopy.py b/Demo/sgi/video/Vcopy.py deleted file mode 100755 index ef4647a..0000000 --- a/Demo/sgi/video/Vcopy.py +++ /dev/null @@ -1,291 +0,0 @@ -#! /usr/bin/env python - -# Universal (non-interactive) CMIF video file copier. - - -# Possibilities: -# -# - Manipulate the time base: -# = resample at a fixed rate -# = divide the time codes by a speed factor (to make it go faster/slower) -# = drop frames that are less than n msec apart (to accommodate slow players) -# - Convert to a different format -# - Magnify (scale) the image - - -# Usage function (keep this up-to-date if you change the program!) - -def usage(): - print 'Usage: Vcopy [options] [infile [outfile]]' - print - print 'Options:' - print - print '-t type : new image type (default unchanged)' - print - print '-M magnify : image magnification factor (default unchanged)' - print '-w width : output image width (default height*4/3 if -h used)' - print '-h height : output image height (default width*3/4 if -w used)' - print - print '-p pf : new x and y packfactor (default unchanged)' - print '-x xpf : new x packfactor (default unchanged)' - print '-y ypf : new y packfactor (default unchanged)' - print - print '-m delta : drop frames closer than delta msec (default 0)' - print '-r delta : regenerate input time base delta msec apart' - print '-s speed : speed change factor (default unchanged)' - print - print 'infile : input file (default film.video)' - print 'outfile : output file (default out.video)' - - -import sys -sys.path.append('/ufs/guido/src/video') - -import VFile -import imgconv -import imageop -import getopt -import string - - -# Global options - -speed = 1.0 -mindelta = 0 -regen = None -newpf = None -newtype = None -magnify = None -newwidth = None -newheight = None - - -# Function to turn a string into a float - -atof_error = 'atof_error' # Exception if it fails - -def atof(s): - try: - return float(eval(s)) - except: - raise atof_error - - -# Main program -- mostly command line parsing - -def main(): - global speed, mindelta, regen, newpf, newtype, \ - magnify, newwidth, newheight - - # Parse command line - try: - opts, args = getopt.getopt(sys.argv[1:], \ - 'M:h:m:p:r:s:t:w:x:y:') - except getopt.error, msg: - sys.stdout = sys.stderr - print 'Error:', msg, '\n' - usage() - sys.exit(2) - - xpf = ypf = None - - # Interpret options - try: - for opt, arg in opts: - if opt == '-M': magnify = atof(arg) - if opt == '-h': height = string.atoi(arg) - if opt == '-m': mindelta = string.atoi(arg) - if opt == '-p': xpf = ypf = string.atoi(arg) - if opt == '-r': regen = string.atoi(arg) - if opt == '-s': speed = atof(arg) - if opt == '-t': newtype = arg - if opt == '-w': newwidth = string.atoi(arg) - if opt == '-x': xpf = string.atoi(arg) - if opt == '-y': ypf = string.atoi(arg) - except string.atoi_error: - sys.stdout = sys.stderr - print 'Option', opt, 'requires integer argument' - sys.exit(2) - except atof_error: - sys.stdout = sys.stderr - print 'Option', opt, 'requires float argument' - sys.exit(2) - - if xpf or ypf: - newpf = (xpf, ypf) - - if newwidth or newheight: - if magnify: - sys.stdout = sys.stderr - print 'Options -w or -h are incompatible with -M' - sys.exit(2) - if not newheight: - newheight = newwidth * 3 / 4 - elif not newwidth: - newwidth = newheight * 4 / 3 - - # Check filename arguments - if len(args) < 1: - args.append('film.video') - if len(args) < 2: - args.append('out.video') - if len(args) > 2: - usage() - sys.exit(2) - if args[0] == args[1]: - sys.stderr.write('Input file can\'t be output file\n') - sys.exit(2) - - # Do the right thing - sts = process(args[0], args[1]) - - # Exit - sys.exit(sts) - - -# Copy one file to another - -def process(infilename, outfilename): - global newwidth, newheight, newpf - - try: - vin = VFile.BasicVinFile(infilename) - except IOError, msg: - sys.stderr.write(infilename + ': I/O error: ' + `msg` + '\n') - return 1 - except VFile.Error, msg: - sys.stderr.write(msg + '\n') - return 1 - except EOFError: - sys.stderr.write(infilename + ': EOF in video file\n') - return 1 - - try: - vout = VFile.BasicVoutFile(outfilename) - except IOError, msg: - sys.stderr.write(outfilename + ': I/O error: ' + `msg` + '\n') - return 1 - - print '=== input file ===' - vin.printinfo() - - vout.setinfo(vin.getinfo()) - - scale = 0 - flip = 0 - decompress = 0 - - vinfmt = vin.format - if vinfmt == 'compress': - if not newtype or newtype == 'compress': - # compressed->compressed: copy compression header - vout.setcompressheader(vin.getcompressheader()) - else: - # compressed->something else: go via rgb-24 - decompress = 1 - vinfmt = 'rgb' - elif newtype == 'compress': - # something else->compressed: not implemented - sys.stderr.write('Sorry, conversion to compressed not yet implemented\n') - return 1 - if newtype: - vout.setformat(newtype) - try: - convert = imgconv.getconverter(vinfmt, vout.format) - except imgconv.error, msg: - sys.stderr.write(str(msg) + '\n') - return 1 - - if newpf: - xpf, ypf = newpf - if not xpf: xpf = vin.xpf - if not ypf: ypf = vout.ypf - newpf = (xpf, ypf) - vout.setpf(newpf) - - if newwidth and newheight: - scale = 1 - - if vin.upside_down <> vout.upside_down or \ - vin.mirror_image <> vout.mirror_image: - flip = 1 - - inwidth, inheight = vin.getsize() - inwidth = inwidth / vin.xpf - inheight = inheight / vin.ypf - - if magnify: - newwidth = int(vout.width * magnify) - newheight = int(vout.height * magnify) - scale = 1 - - if scale: - vout.setsize(newwidth, newheight) - else: - newwidth, newheight = vout.getsize() - - if vin.packfactor <> vout.packfactor: - scale = 1 - - if scale or flip: - if vout.bpp not in (8, 32): - sys.stderr.write('Can\'t scale or flip this type\n') - return 1 - - newwidth = newwidth / vout.xpf - newheight = newheight / vout.ypf - - print '=== output file ===' - vout.printinfo() - vout.writeheader() - - told = 0 - nin = 0 - nout = 0 - tin = 0 - tout = 0 - - while 1: - try: - tin, data, cdata = vin.getnextframe() - except EOFError: - break - if decompress: - data = vin.decompress(data) - nin = nin + 1 - if regen: - tout = nin * regen - else: - tout = tin - tout = int(tout / speed) - if tout - told < mindelta: - continue - told = tout - if newtype: - data = convert(data, inwidth, inheight) - if scale: - data = imageop.scale(data, vout.bpp/8, \ - inwidth, inheight, newwidth, newheight) - if flip: - x0, y0 = 0, 0 - x1, y1 = newwidth-1, newheight-1 - if vin.upside_down <> vout.upside_down: - y1, y0 = y0, y1 - if vin.mirror_image <> vout.mirror_image: - x1, x0 = x0, x1 - data = imageop.crop(data, vout.bpp/8, \ - newwidth, newheight, x0, y0, x1, y1) - print 'Writing frame', nout - vout.writeframe(tout, data, cdata) - nout = nout + 1 - - vout.close() - vin.close() - - -# Don't forget to call the main program - -try: - main() -except KeyboardInterrupt: - print '[Interrupt]' diff --git a/Demo/sgi/video/VcrIndex.py b/Demo/sgi/video/VcrIndex.py deleted file mode 100755 index 80212ee..0000000 --- a/Demo/sgi/video/VcrIndex.py +++ /dev/null @@ -1,327 +0,0 @@ -# -# A VCR index. -# -import os -import string - -error='VcrIndex.error' -VERSION_STRING='#!VcrIndex 1.1\n' -PREV_VERSION_STRING='#!VcrIndex 1.0\n' - -class VcrIndex: - def __init__(self, name): - self.curmovie = None - self.curscene = None - self.modified = 0 - self.filename = name - self.basename = os.path.basename(name) - self.editable = [] - if not name: - self.movies = {} - return - try: - fp = open(name, 'r') - except IOError: - self.movies = {} - return - header = fp.readline() - if header == PREV_VERSION_STRING: - print 'Converting old-format database...' - data = fp.read(100000) - self.movies = eval(data) - for m in self.movies.keys(): - d = self.movies[m] - newd = {} - for s in d.keys(): - newsd = {} - newsd['START'] = d[s] - if s == 'START': - s = '-ALL-' - newd[s] = newsd - - self.movies[m] = newd - print 'Done.' - return - if header <> VERSION_STRING: - print 'VcrIndex: incorrect version string:', header - self.movies = {} - return - data = fp.read(100000) - self.movies = eval(data) - # - # Save database to given file (or same file as read from if no - # filename given). - # - def save(self, name): - if not name: - name = self.filename - if not name: - raise error, 'No filename given' - self.filename = name - bupname = name + '~' - try: - os.unlink(bupname) - except os.error: - pass - try: - os.rename(name, bupname) - except os.error: - pass - fp = open(name, 'w') - data = str(self.movies) - fp.write(VERSION_STRING) - fp.write(data) - fp.write('\n') - fp.close() - self.modified = 0 - # - # Get a list of movie names in tape order - # - def get_movienames(self): - names = self.movies.keys() - sorted = [] - for name in names: - sorted.append(self.movies[name]['-ALL-']['START'], name) - sorted.sort() - rv = [] - for pos, name in sorted: - rv.append(name) - return rv - # - # Get a list of scene names in tape order - # - def get_scenenames(self): - if not self.curmovie: - return [] - scenedict = self.movies[self.curmovie] - names = scenedict.keys() - sorted = [] - for name in names: - sorted.append(scenedict[name], name) - sorted.sort() - rv = [] - for pos, name in sorted: - rv.append(name) - return rv - # - # Get a list of scene ids (format '00:02:32:12 name') in tape order - # - def get_sceneids(self): - if not self.curmovie: - return [] - scenedict = self.movies[self.curmovie] - names = scenedict.keys() - sorted = [] - for name in names: - sorted.append(scenedict[name]['START'], name) - sorted.sort() - rv = [] - for pos, name in sorted: - str = '%02d:%02d:%02d:%02d ' % pos - rv.append(str + name) - return rv - # - # Does a movie exist? - # - def movie_exists(self, name): - return self.movies.has_key(name) - # - # Select a movie. - # - def movie_select(self, name): - if not self.movies.has_key(name): - raise error, 'No such movie: '+name - self.curmovie = name - self.curscene = None - # - # Get movie dictionary, or raise an error if no current movie. - # - def _getmoviedict(self): - if not self.curmovie: - raise error, 'No current movie' - return self.movies[self.curmovie] - # - # Rename a movie. - # - def movie_rename(self, newname): - scenedict = self._getmoviedict() - if self.movie_exists(newname): - raise error, 'Movie already exists: '+newname - del self.movies[self.curmovie] - self.movies[newname] = scenedict - self.curmovie = newname - self.modified = 1 - # - # Copy a movie. - # - def movie_copy(self, newname): - scenedict = self._getmoviedict() - if self.movie_exists(newname): - raise error, 'Movie already exists: '+newname - newdict = {} - for k in scenedict.keys(): - olddata = scenedict[k] - newdata = {} - for i in olddata.keys(): - newdata[i] = olddata[i] - newdict[k] = newdata - self.movies[newname] = newdict - self.curmovie = newname - self.modified = 1 - # - # Delete a movie. - # - def movie_delete(self): - if not self.curmovie: - raise error, 'No current movie' - del self.movies[self.curmovie] - self.curmovie = None - self.curscene = None - self.modified = 1 - # - # Create a new movie. - # - def movie_new(self, name, pos): - if self.movie_exists(name): - raise error, 'Movie already exists: '+name - newdict = {} - newsdict = {} - newsdict['START'] = pos - newdict['-ALL-'] = newsdict - self.movies[name] = newdict - self.curmovie = name - self.curscene = None - self.modified = 1 - # - # Does a scene exist? - # - def scene_exists(self, name): - scenedict = self._getmoviedict() - return scenedict.has_key(name) - # - # Select a current scene. - # - def scene_select(self, name): - scenedict = self._getmoviedict() - if not scenedict.has_key(name): - raise error, 'No such scene: '+name - self.curscene = name - # - # Rename a scene. - # - def scene_rename(self, newname): - scenedict = self._getmoviedict() - if not self.curscene: - raise error, 'No current scene' - if scenedict.has_key(newname): - raise error, 'Scene already exists: '+newname - if self.curscene == '-ALL-': - raise error, 'Cannot rename -ALL-' - scenedict[newname] = scenedict[self.curscene] - del scenedict[self.curscene] - self.curscene = newname - self.modified = 1 - # - # Copy a scene. - # - def scene_copy(self, newname): - scenedict = self._getmoviedict() - if not self.curscene: - raise error, 'No current scene' - if scenedict.has_key(newname): - raise error, 'Scene already exists: '+newname - scenedict[newname] = scenedict[self.curscene] - self.curscene = newname - self.modified = 1 - # - # Delete a scene. - # - def scene_delete(self): - scenedict = self._getmoviedict() - if not self.curscene: - raise error, 'No current scene' - if self.curscene == '-ALL-': - raise error, 'Cannot delete -ALL-' - del scenedict[self.curscene] - self.curscene = None - self.modified = 1 - # - # Add a new scene. - # - def scene_new(self, newname, pos): - scenedict = self._getmoviedict() - if scenedict.has_key(newname): - raise error, 'Scene already exists: '+newname - newdict = {} - newdict['START'] = pos - scenedict[newname] = newdict - self.curscene = newname - self.modified = 1 - # - # Get scene data. - # - def _getscenedata(self): - scenedict = self._getmoviedict() - if not self.curscene: - raise error, 'No current scene' - return scenedict[self.curscene] - # - # Data manipulation routines. - # - def pos_get(self): - return self._getscenedata()['START'] - # - def pos_set(self, pos): - data = self._getscenedata() - data['START'] = pos - self.modified = 1 - # - def comment_get(self): - data = self._getscenedata() - if data.has_key('COMMENT'): - return data['COMMENT'] - else: - return '' - # - def comment_set(self, comment): - data = self._getscenedata() - data['COMMENT'] = comment - self.modified = 1 - # - # Get the scene id of the current scene. - # - def get_cursceneid(self): - pos = self._getscenedata()['START'] - str = '%02d:%02d:%02d:%02d ' % pos - return str + self.curscene - # - # Convert a scene id to a scene name. - # - def scene_id2name(self, id): - pos = string.find(id, ' ') - if pos <= 0: - raise error, 'Not a scene id: '+id - return id[pos+1:] - # - # Select a scene given a position. - # - def pos_select(self, pos): - prevmovie = None - movies = self.get_movienames() - for movie in movies: - mpos = self.movies[movie]['-ALL-']['START'] - if mpos > pos: - break - prevmovie = movie - if not prevmovie: - raise error, 'Scene before BOT' - - self.movie_select(prevmovie) - scenes = self.get_scenenames() - scenedict = self._getmoviedict() - prevscene = 'START' - for scene in scenes: - if scenedict[scene]['START'] > pos: - break - prevscene = scene - self.scene_select(prevscene) diff --git a/Demo/sgi/video/Vedit.py b/Demo/sgi/video/Vedit.py deleted file mode 100755 index 60ef49f..0000000 --- a/Demo/sgi/video/Vedit.py +++ /dev/null @@ -1,301 +0,0 @@ -#! /usr/bin/env python - -# Edit CMIF movies interactively -- copy one or more files to an output file - - -# XXX To do: -# -# - convert between formats (grey, rgb, rgb8, ...) -# - change size -# - cut out a given area of the image -# - change time base (a la Vtime) - - -import sys -import os -import gl, GL, DEVICE -import fl, FL -import flp -import Viewer -import getopt -import string -import watchcursor - -ARROW = 0 -WATCH = 1 -watchcursor.defwatch(WATCH) - - -def main(): - qsize = 40 - opts, args = getopt.getopt(sys.argv[1:], 'q:') - for o, a in opts: - if o == '-q': - qsize = string.atoi(a) - ed = Editor(qsize) - if args[0:]: - ed.open_input(args[0]) - if args[1:]: - ed.open_output(args[1]) - while 1: - dummy = fl.do_forms() - - -class Editor: - - def __init__(self, qsize): - self.qsize = qsize - self.vin = None - self.vout = None - self.ifile = '' - self.ofile = '' - formdef = flp.parse_form('VeditForm', 'form') - flp.create_full_form(self, formdef) - self.form.show_form(FL.PLACE_SIZE, FL.TRUE, 'Vedit') - fl.set_event_call_back(self.do_event) - - def do_event(self, dev, val): - if dev == DEVICE.REDRAW: - if self.vin: - self.vin.redraw(val) - if self.vout: - self.vout.redraw(val) - - def busy(self): - gl.winset(self.form.window) - gl.setcursor(WATCH, 0, 0) - - def ready(self): - gl.winset(self.form.window) - gl.setcursor(ARROW, 0, 0) - - - def iocheck(self): - self.msg('') - if self.vin == None and self.vout == None: - self.err('Please open input and output files first') - return 0 - return self.icheck() and self.ocheck() - - def icheck(self): - self.msg('') - if self.vin == None: - self.err('Please open an input file first') - return 0 - return 1 - - def ocheck(self): - self.msg('') - if self.vout == None: - self.err('Please open an output file first') - return 0 - return 1 - - - def cb_in_new(self, *args): - self.msg('') - hd, tl = os.path.split(self.ifile) - filename = fl.file_selector('Input video file', hd, '', tl) - if not filename: return - self.open_input(filename) - - def cb_in_close(self, *args): - self.msg('') - self.close_input() - - def cb_in_skip(self, *args): - if not self.icheck(): return - if not self.vin.get(): self.err('End of input file') - self.ishow() - - def cb_in_back(self, *args): - if not self.icheck(): return - if not self.vin.backup(): self.err('Begin of input file') - self.ishow() - - def cb_in_slider(self, *args): - if not self.icheck(): return - left, pos, right = self.vin.qinfo() - i = int(self.in_slider.get_slider_value()) - i = max(i, left) - i = min(i, right) - if i == pos: return - if not self.vin.seek(i): - self.err('Input seek failed') - self.ishow() - - def cb_in_rewind(self, *args): - if not self.icheck(): return - self.vin.rewind() - self.ishow() - - - def cb_copy(self, *args): - if not self.iocheck(): return - data = self.vin.get() - if not data: - self.err('End of input file') - self.ishow() - return - if self.vout.getinfo() <> self.vin.getinfo(): - print 'Copying info...' - self.vout.setinfo(self.vin.getinfo()) - if self.vin.format == 'compress': - self.vout.setcompressheader(\ - self.vin.getcompressheader()) - self.vout.put(data) - self.oshow() - self.ishow() - - def cb_uncopy(self, *args): - if not self.iocheck(): return - if not self.vout.backup(): - self.err('Output buffer exhausted') - return - self.oshow() - if not self.vin.backup(): - self.err('Begin of input file') - return - self.ishow() - - - def cb_out_new(self, *args): - self.msg('') - hd, tl = os.path.split(self.ofile) - filename = fl.file_selector('Output video file', hd, '', tl) - if not filename: return - self.open_output(filename) - - def cb_out_close(self, *args): - self.msg('') - self.close_output() - - def cb_out_skip(self, *args): - if not self.ocheck(): return - if not self.vout.forward(): self.err('Output buffer exhausted') - self.oshow() - - def cb_out_back(self, *args): - if not self.ocheck(): return - if not self.vout.backup(): self.err('Output buffer exhausted') - self.oshow() - - def cb_out_slider(self, *args): - if not self.ocheck(): return - i = int(self.out_slider.get_slider_value()) - left, pos, right = self.vout.qinfo() - i = int(self.out_slider.get_slider_value()) - i = max(i, left) - i = min(i, right) - if i == pos: return - if not self.vout.seek(i): - self.err('Output seek failed') - self.oshow() - - def cb_out_trunc(self, *arcs): - if not self.ocheck(): return - self.vout.trunc() - self.oshow() - - def cb_out_rewind(self, *args): - if not self.ocheck(): return - self.vout.rewind() - self.oshow() - - - def cb_quit(self, *args): - self.close_input() - self.close_output() - sys.exit(0) - - - def open_input(self, filename): - self.ifile = filename - basename = os.path.split(filename)[1] - title = 'in: ' + basename - try: - vin = Viewer.InputViewer(filename, title) - except: - self.err('Can\'t open input file', filename) - return - self.close_input() - self.vin = vin - self.in_file.label = basename - self.ishow() - - def close_input(self): - if self.vin: - self.busy() - self.msg('Closing input file...') - self.vin.close() - self.ready() - self.msg('') - self.vin = None - self.in_file.label = '(none)' - self.format('in') - - def ishow(self): - self.vin.show() - self.format('in') - - def open_output(self, filename): - self.ofile = filename - basename = os.path.split(filename)[1] - title = 'out: ' + basename - try: - vout = Viewer.OutputViewer(filename, \ - title, self.qsize) - except: - self.err('Can\'t open output file', filename) - return - self.close_output() - self.vout = vout - self.out_file.label = basename - if self.vin: - self.vout.setinfo(self.vin.getinfo()) - self.oshow() - - def close_output(self): - if self.vout: - self.busy() - self.msg('Closing output file...') - self.vout.close() - self.ready() - self.msg('') - self.vout = None - self.out_file.label = '(none)' - self.format('out') - - def oshow(self): - self.vout.show() - self.format('out') - - - def msg(self, *args): - str = string.strip(string.join(args)) - self.msg_area.label = str - - def err(self, *args): - gl.ringbell() - apply(self.msg, args) - - def format(self, io): - v = getattr(self, 'v' + io) - if v == None: - left = right = pos = 0 - else: - left, pos, right = v.qinfo() - getattr(self, io + '_info1').label = `left` - getattr(self, io + '_info2').label = `pos` - getattr(self, io + '_info3').label = `right` - sl = getattr(self, io + '_slider') - self.form.freeze_form() - sl.set_slider_bounds(left, right) - sl.set_slider_value(pos) - self.form.unfreeze_form() - - -try: - main() -except KeyboardInterrupt: - print '[Interrupt]' diff --git a/Demo/sgi/video/VeditForm.fd b/Demo/sgi/video/VeditForm.fd deleted file mode 100644 index ba59de4..0000000 --- a/Demo/sgi/video/VeditForm.fd +++ /dev/null @@ -1,435 +0,0 @@ -Magic: 12321 - -Internal Form Definition File - (do not change) - -Number of forms: 1 - -=============== FORM =============== -Name: form -Width: 510.000000 -Height: 350.000000 -Number of Objects: 28 - --------------------- -class: 1 -type: 1 -box: 0.000000 0.000000 510.000000 350.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 1 -type: 6 -box: 10.000000 130.000000 240.000000 209.999985 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 1 -type: 6 -box: 260.000000 130.000000 240.000000 209.999985 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: -callback: -argument: - --------------------- -class: 2 -type: 0 -box: 10.000000 10.000000 430.000000 30.000000 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: CMIF Video Editor, by Guido van Rossum -name: msg_area -callback: -argument: - --------------------- -class: 11 -type: 4 -box: 200.000000 90.000000 120.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -> Copy -> -name: -callback: cb_copy -argument: 0 - --------------------- -class: 11 -type: 4 -box: 210.000000 220.000000 30.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: @> -name: -callback: cb_in_skip -argument: 0 - --------------------- -class: 11 -type: 0 -box: 20.000000 140.000000 220.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Rewind -name: -callback: cb_in_rewind -argument: 0 - --------------------- -class: 11 -type: 0 -box: 270.000000 140.000000 100.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Reset -name: -callback: cb_out_rewind -argument: 0 - --------------------- -class: 11 -type: 0 -box: 20.000000 260.000000 160.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: New input file... -name: -callback: cb_in_new -argument: 0 - --------------------- -class: 11 -type: 0 -box: 330.000000 260.000000 160.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: New output file... -name: -callback: cb_out_new -argument: 0 - --------------------- -class: 2 -type: 0 -box: 20.000000 300.000000 220.000000 30.000000 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: (none) -name: in_file -callback: -argument: - --------------------- -class: 2 -type: 0 -box: 270.000000 300.000000 220.000000 30.000000 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: (none) -name: out_file -callback: -argument: - --------------------- -class: 11 -type: 0 -box: 450.000000 10.000000 50.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Quit -name: -callback: cb_quit -argument: 0 - --------------------- -class: 11 -type: 4 -box: 270.000000 220.000000 30.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: @< -name: -callback: cb_out_back -argument: 0 - --------------------- -class: 11 -type: 4 -box: 20.000000 220.000000 30.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: @< -name: -callback: cb_in_back -argument: 0 - --------------------- -class: 11 -type: 4 -box: 460.000000 220.000000 30.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: @> -name: -callback: cb_out_skip -argument: 0 - --------------------- -class: 11 -type: 4 -box: 200.000000 50.000000 120.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Uncopy -name: -callback: cb_uncopy -argument: 0 - --------------------- -class: 11 -type: 0 -box: 190.000000 260.000000 50.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Close -name: -callback: cb_in_close -argument: 0 - --------------------- -class: 11 -type: 0 -box: 270.000000 260.000000 50.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Close -name: -callback: cb_out_close -argument: 0 - --------------------- -class: 21 -type: 1 -box: 60.000000 220.000000 140.000000 30.000000 -boxtype: 2 -colors: 47 47 -alignment: 1 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: in_slider -callback: cb_in_slider -argument: 0 - --------------------- -class: 21 -type: 1 -box: 310.000000 220.000000 140.000000 30.000000 -boxtype: 2 -colors: 47 47 -alignment: 1 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: out_slider -callback: cb_out_slider -argument: 0 - --------------------- -class: 2 -type: 0 -box: 20.000000 180.000000 30.000000 30.000000 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 8.000000 -lcol: 0 -label: -name: in_info1 -callback: -argument: - --------------------- -class: 2 -type: 0 -box: 100.000000 180.000000 60.000004 30.000000 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: in_info2 -callback: -argument: - --------------------- -class: 2 -type: 0 -box: 210.000000 180.000000 30.000000 30.000000 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 8.000000 -lcol: 0 -label: -name: in_info3 -callback: -argument: - --------------------- -class: 2 -type: 0 -box: 270.000000 180.000000 30.000000 30.000000 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 8.000000 -lcol: 0 -label: -name: out_info1 -callback: -argument: - --------------------- -class: 2 -type: 0 -box: 350.000000 180.000000 60.000004 30.000000 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: -name: out_info2 -callback: -argument: - --------------------- -class: 2 -type: 0 -box: 460.000000 180.000000 30.000000 30.000000 -boxtype: 6 -colors: 47 47 -alignment: 4 -style: 0 -size: 8.000000 -lcol: 0 -label: -name: out_info3 -callback: -argument: - --------------------- -class: 11 -type: 0 -box: 390.000000 140.000000 100.000000 30.000000 -boxtype: 1 -colors: 47 47 -alignment: 4 -style: 0 -size: 11.000000 -lcol: 0 -label: Truncate -name: -callback: cb_out_trunc -argument: 0 - -============================== -create_the_forms diff --git a/Demo/sgi/video/Vfix.py b/Demo/sgi/video/Vfix.py deleted file mode 100755 index 4870c1b..0000000 --- a/Demo/sgi/video/Vfix.py +++ /dev/null @@ -1,90 +0,0 @@ -#! /usr/bin/env python - -# Copy a video file, fixing the line width to be a multiple of 4 - - -# Usage: -# -# Vfix [infile [outfile]] - - -# Options: -# -# infile : input file (default film.video) -# outfile : output file (default out.video) - - -import sys -import imageop -sys.path.append('/ufs/guido/src/video') -import VFile - - -# Main program -- mostly command line parsing - -def main(): - args = sys.argv[1:] - if len(args) < 1: - args.append('film.video') - if len(args) < 2: - args.append('out.video') - if len(args) > 2: - sys.stderr.write('usage: Vfix [infile [outfile]]\n') - sys.exit(2) - sts = process(args[0], args[1]) - sys.exit(sts) - - -# Copy one file to another - -def process(infilename, outfilename): - try: - vin = VFile.BasicVinFile(infilename) - except IOError, msg: - sys.stderr.write(infilename + ': I/O error: ' + `msg` + '\n') - return 1 - except VFile.Error, msg: - sys.stderr.write(msg + '\n') - return 1 - except EOFError: - sys.stderr.write(infilename + ': EOF in video file\n') - return 1 - - try: - vout = VFile.BasicVoutFile(outfilename) - except IOError, msg: - sys.stderr.write(outfilename + ': I/O error: ' + `msg` + '\n') - return 1 - - info = vin.getinfo() - if info[0] <> 'grey': - sys.stderr.write('Vfix: input not in grey format\n') - return 1 - vout.setinfo(info) - inwidth, height = vin.getsize() - pf = vin.packfactor - if (inwidth/pf)%4 == 0: - sys.stderr.write('Vfix: fix not necessary\n') - return 1 - outwidth = (inwidth/pf/4)*4*pf - print 'inwidth =', inwidth, 'outwidth =', outwidth - vout.setsize(outwidth, height) - vout.writeheader() - n = 0 - try: - while 1: - t, data, cdata = vin.getnextframe() - n = n + 1 - sys.stderr.write('Frame ' + `n` + '...') - data = imageop.crop(data, 1, inwidth/pf, height/pf, \ - 0, 0, outwidth/pf-1, height/pf-1) - vout.writeframe(t, data, None) - sys.stderr.write('\n') - except EOFError: - pass - return 0 - - -# Don't forget to call the main program - -main() diff --git a/Demo/sgi/video/Vgeneric.py b/Demo/sgi/video/Vgeneric.py deleted file mode 100755 index 182adbe..0000000 --- a/Demo/sgi/video/Vgeneric.py +++ /dev/null @@ -1,2 +0,0 @@ -import sys, posixpath -exec('import ' + posixpath.basename(sys.argv[0]) + '\n') diff --git a/Demo/sgi/video/Viewer.py b/Demo/sgi/video/Viewer.py deleted file mode 100755 index 07cba54..0000000 --- a/Demo/sgi/video/Viewer.py +++ /dev/null @@ -1,255 +0,0 @@ -import gl, GL -import VFile -import os - - -class InputViewer: - - def __init__(self, filename, title, *args): - try: - self.vin = VFile.VinFile(filename) - except (EOFError, VFile.Error): - raise IOError, 'bad video input file' - self.vin.warmcache() - if not title: - title = os.path.split(filename)[1] - self.filename = filename - self.title = title - self.qsize = len(self.vin.index) - gl.foreground() - gl.prefsize(self.vin.width, self.vin.height) - self.wid = -1 - self.reset() - - def close(self): - self.vin.close() - if self.wid > 0: - gl.winclose(self.wid) - - def rewind(self): - self.vin.rewind() - self.reset() - - def getinfo(self): - return self.vin.getinfo() - - # Internal - def reset(self): - if self.wid > 0: - gl.winset(self.wid) - gl.clear() - self.vin.initcolormap() - self.qindex = 0 - - def show(self): - if self.wid < 0: - gl.foreground() - gl.prefsize(self.vin.width, self.vin.height) - self.wid = gl.winopen(self.title) - gl.clear() - self.vin.initcolormap() - gl.winset(self.wid) - if self.qindex >= self.qsize: - self.vin.clear() - return - dt, d, cd = self.vin.getrandomframe(self.qindex) - self.vin.showframe(d, cd) - - def redraw(self, wid): - if wid == self.wid >= 0: - gl.winset(self.wid) - gl.reshapeviewport() - self.vin.clear() - self.show() - - def get(self): - if self.qindex >= self.qsize: - return None - if self.qindex > 0: - prevt, ds, cs = \ - self.vin.getrandomframeheader(self.qindex-1) - else: - prevt = 0 - t, data, cdata = self.vin.getrandomframe(self.qindex) - self.qindex = self.qindex + 1 - return t-prevt, data, cdata - - def backup(self): - if self.qindex == 0: - return 0 - self.qindex = self.qindex - 1 - return 1 - - def seek(self, i): - if not 0 <= i <= self.qsize: - return 0 - self.qindex = i - return 1 - - def tell(self): - return self.qindex - - def qsizes(self): - return self.qindex, self.qsize - self.qindex - - def qinfo(self): - return 0, self.qindex, self.qsize - - -class OutputViewer: - - def __init__(self, filename, title, qsize): - try: - self.vout = VFile.VoutFile(filename) - except (EOFError, VFile.Error): - raise IOError, 'bad video output file' - if not title: - title = os.path.split(filename)[1] - self.filename = filename - self.title = title - self.qsize = qsize - gl.foreground() - self.wid = -1 - self.reset() - - def close(self): - while self.queue: - self.flushq() - self.vout.close() - if self.wid > 0: - gl.winclose(self.wid) - - def rewind(self): - info = self.vout.getinfo() - self.vout.close() - self.vout = VFile.VoutFile(self.filename) - self.vout.setinfo(info) - self.reset() - - def getinfo(self): - return self.vout.getinfo() - - def setinfo(self, info): - if info == self.getinfo(): return # No change - self.vout.setinfo(info) - if self.wid > 0: - gl.winclose(self.wid) - self.wid = -1 - - # Internal - def reset(self): - if self.wid > 0: - gl.winset(self.wid) - gl.clear() - self.vout.initcolormap() - self.queue = [] - self.spares = [] - self.written = 0 - self.lastt = 0 - - # Internal - def flushq(self): - if self.written == 0: - self.vout.writeheader() - dt, d, cd = self.queue[0] - self.lastt = self.lastt + dt - self.vout.writeframe(self.lastt, d, cd) - del self.queue[0] - self.written = self.written + 1 - - def show(self): - if self.wid < 0: - gl.foreground() - gl.prefsize(self.vout.width, self.vout.height) - self.wid = gl.winopen(self.title) - gl.clear() - self.vout.initcolormap() - gl.winset(self.wid) - if not self.queue: - self.vout.clear() - return - dt, d, cd = self.queue[-1] - self.vout.showframe(d, cd) - - def redraw(self, wid): - if wid == self.wid >= 0: - gl.winset(self.wid) - gl.reshapeviewport() - self.vout.clear() - self.show() - - def backup(self): - if len(self.queue) < 1: return 0 - self.spares.insert(0, self.queue[-1]) - del self.queue[-1] - return 1 - - def forward(self): - if not self.spares: return 0 - self.queue.append(self.spares[0]) - del self.spares[0] - return 1 - - def put(self, item): - self.queue.append(item) - self.spares = [] - while len(self.queue) > self.qsize: - self.flushq() - - def seek(self, i): - i = i - self.written - if not 0 <= i <= len(self.queue) + len(self.spares): - return 0 - while i < len(self.queue): - if not self.backup(): - return 0 - while i > len(self.queue): - if not self.forward(): - return 0 - return 1 - - def trunc(self): - del self.spares[:] - - def tell(self): - return self.written + len(self.queue) - - def qsizes(self): - return len(self.queue), len(self.spares) - - def qinfo(self): - first = self.written - pos = first + len(self.queue) - last = pos + len(self.spares) - return first, pos, last - - -def test(): - import sys - a = InputViewer(sys.argv[1], '') - b = OutputViewer(sys.argv[2], '') - b.setinfo(a.getinfo()) - - while 1: - a.show() - data = a.get() - if data is None: - break - b.put(data) - b.show() - - while a.backup(): - data = a.get() - b.put(data) - b.show() - if a.backup(): a.show() - - while 1: - data = a.get() - if data is None: - break - b.put(data) - b.show() - a.show() - - b.close() diff --git a/Demo/sgi/video/Vinfo.py b/Demo/sgi/video/Vinfo.py deleted file mode 100755 index 0d9d294..0000000 --- a/Demo/sgi/video/Vinfo.py +++ /dev/null @@ -1,174 +0,0 @@ -#! /usr/bin/env python - -# Print some info about a CMIF movie file - - -# Usage: -# -# Vinfo [-d] [-q] [-s] [-t] [file] ... - - -# Options: -# -# -d : print deltas between frames instead of frame times -# -q : quick: don't read the frames -# -s : don't print times (but do count frames and print the total) -# -t : terse (one line/file, implies -s) -# file ... : file(s) to inspect; default film.video - - -import sys -sys.path.append('/ufs/guido/src/video') -import VFile -import getopt -import string - - -# Global options - -short = 0 -quick = 0 -delta = 0 -terse = 0 -maxwidth = 10 - - -# Main program -- mostly command line parsing - -def main(): - global short, quick, delta, terse, maxwidth - try: - opts, args = getopt.getopt(sys.argv[1:], 'dqst') - except getopt.error, msg: - sys.stdout = sys.stderr - print msg - print 'usage: Vinfo [-d] [-q] [-s] [-t] [file] ...' - sys.exit(2) - for opt, arg in opts: - if opt == '-q': - quick = 1 - if opt == '-d': - delta = 1 - if opt == '-s': - short = 1 - if opt == '-t': - terse = short = 1 - if not args: - args = ['film.video'] - for filename in args: - maxwidth = max(maxwidth, len(filename)) - sts = 0 - for filename in args: - if process(filename): - sts = 1 - sys.exit(sts) - - -# Process one file - -def process(filename): - try: - vin = VFile.RandomVinFile(filename) - except IOError, msg: - sys.stderr.write(filename + ': I/O error: ' + `msg` + '\n') - return 1 - except VFile.Error, msg: - sys.stderr.write(msg + '\n') - return 1 - except EOFError: - sys.stderr.write(filename + ': EOF in video file\n') - return 1 - - if terse: - print string.ljust(filename, maxwidth), - kbytes = (VFile.getfilesize(filename) + 1023) / 1024 - print string.rjust(`kbytes`, 5) + 'K', - print ' ', string.ljust(`vin.version`, 5), - print string.ljust(vin.format, 8), - print string.rjust(`vin.width`, 4), - print string.rjust(`vin.height`, 4), - if type(vin.packfactor) == type(()): - xpf, ypf = vin.packfactor - s = string.rjust(`xpf`, 2) + ',' + \ - string.rjust(`ypf`, 2) - else: - s = string.rjust(`vin.packfactor`, 2) - if type(vin.packfactor) == type(0) and \ - vin.format not in ('rgb', 'jpeg') and \ - (vin.width/vin.packfactor) % 4 <> 0: - s = s + '! ' - else: - s = s + ' ' - print s, - sys.stdout.flush() - else: - vin.printinfo() - - if quick: - if terse: - print - vin.close() - return 0 - - try: - vin.readcache() - if not terse: - print '[Using cached index]' - except VFile.Error: - if not terse: - print '[Constructing index on the fly]' - - if not short: - if delta: - print 'Frame time deltas:', - else: - print 'Frame times:', - - n = 0 - t = 0 - told = 0 - datasize = 0 - while 1: - try: - t, ds, cs = vin.getnextframeheader() - vin.skipnextframedata(ds, cs) - except EOFError: - break - datasize = datasize + ds - if cs: datasize = datasize + cs - if not short: - if n%8 == 0: - sys.stdout.write('\n') - if delta: - sys.stdout.write('\t' + `t - told`) - told = t - else: - sys.stdout.write('\t' + `t`) - n = n+1 - - if not short: print - - if terse: - print string.rjust(`n`, 6), - if t: print string.rjust(`int(n*10000.0/t)*0.1`, 5), - print - else: - print 'Total', n, 'frames in', t*0.001, 'sec.', - if t: print '-- average', int(n*10000.0/t)*0.1, 'frames/sec', - print - print 'Total data', 0.1 * int(datasize / 102.4), 'Kbytes', - if t: - print '-- average', - print 0.1 * int(datasize / 0.1024 / t), 'Kbytes/sec', - print - - vin.close() - return 0 - - -# Don't forget to call the main program - -try: - main() -except KeyboardInterrupt: - print '[Interrupt]' diff --git a/Demo/sgi/video/Vmkjpeg.py b/Demo/sgi/video/Vmkjpeg.py deleted file mode 100755 index 0c9687a..0000000 --- a/Demo/sgi/video/Vmkjpeg.py +++ /dev/null @@ -1,92 +0,0 @@ -#! /usr/bin/env python - -# Compress an rgb or grey video file to jpeg format - - -# Usage: -# -# Vmkjpeg [infile [outfile]] - - -# Options: -# -# infile : input file (default film.video) -# outfile : output file (default out.video) - - -import sys -import jpeg -sys.path.append('/ufs/guido/src/video') -import VFile - - -# Main program -- mostly command line parsing - -def main(): - args = sys.argv[1:] - if len(args) < 1: - args.append('film.video') - if len(args) < 2: - args.append('out.video') - if len(args) > 2: - sys.stderr.write('usage: Vmkjpeg [infile [outfile]]\n') - sys.exit(2) - sts = process(args[0], args[1]) - sys.exit(sts) - - -# Copy one file to another - -def process(infilename, outfilename): - try: - vin = VFile.BasicVinFile(infilename) - except IOError, msg: - sys.stderr.write(infilename + ': I/O error: ' + `msg` + '\n') - return 1 - except VFile.Error, msg: - sys.stderr.write(msg + '\n') - return 1 - except EOFError: - sys.stderr.write(infilename + ': EOF in video file\n') - return 1 - - try: - vout = VFile.BasicVoutFile(outfilename) - except IOError, msg: - sys.stderr.write(outfilename + ': I/O error: ' + `msg` + '\n') - return 1 - - info = vin.getinfo() - if info[0] == 'rgb': - width, height = vin.getsize() - bytes = 4 - format = 'jpeg' - elif info[0] == 'grey': - width, height = vin.getsize() - pf = vin.packfactor - width, height = width / pf, height / pf - bytes = 1 - format = 'jpeggrey' - else: - sys.stderr.write('Vmkjpeg: input not in rgb or grey format\n') - return 1 - info = (format,) + info[1:] - vout.setinfo(info) - vout.writeheader() - n = 0 - try: - while 1: - t, data, cdata = vin.getnextframe() - n = n + 1 - sys.stderr.write('Frame ' + `n` + '...') - data = jpeg.compress(data, width, height, bytes) - vout.writeframe(t, data, None) - sys.stderr.write('\n') - except EOFError: - pass - return 0 - - -# Don't forget to call the main program - -main() diff --git a/Demo/sgi/video/Vplay.py b/Demo/sgi/video/Vplay.py deleted file mode 100755 index 176c0e5..0000000 --- a/Demo/sgi/video/Vplay.py +++ /dev/null @@ -1,355 +0,0 @@ -#! /usr/bin/env python - -# Play CMIF movie files - - -# Help function - -def help(): - print 'Usage: Vplay [options] [file] ...' - print - print 'Options:' - print '-M magnify : magnify the image by the given factor' - print '-d : write some debug stuff on stderr' - print '-l : loop, playing the movie over and over again' - print '-m delta : drop frames closer than delta seconds (default 0.)' - print '-n : don\'t wait after each file' - print '-q : quiet, no informative messages' - print '-r delta : regenerate input time base delta seconds apart' - print '-s speed : speed change factor (default 1.0)' - print '-t : use a 2nd thread for read-ahead' - print '-x left : window offset from left of screen' - print '-y top : window offset from top of screen' - print '-w width : window width' - print '-h height : window height' - print '-b color : background color (white,black or (r,g,b))' - print 'file ... : file(s) to play; default film.video' - print - print 'User interface:' - print 'Press the left mouse button to stop or restart the movie.' - print 'Press ESC or use the window manager Close or Quit command' - print 'to close the window and play the next file (if any).' - - -# Imported modules - -import sys -sys.path.append('/ufs/guido/src/video') # Increase chance of finding VFile -import VFile -import time -import gl, GL -from DEVICE import REDRAW, ESCKEY, LEFTMOUSE, WINSHUT, WINQUIT -import getopt -import string - - -# Global options - -debug = 0 -looping = 0 -magnify = 1 -mindelta = 0 -nowait = 0 -quiet = 0 -regen = None -speed = 1.0 -threading = 0 -xoff = yoff = None -xwsiz = ywsiz = None -bgcolor = None - - -# Main program -- mostly command line parsing - -def main(): - global debug, looping, magnify, mindelta, nowait, quiet, regen, speed - global threading, xoff, yoff, xwsiz, ywsiz, bgcolor - - # Parse command line - try: - opts, args = getopt.getopt(sys.argv[1:], \ - 'M:dlm:nqr:s:tx:y:w:h:b:') - except getopt.error, msg: - sys.stdout = sys.stderr - print 'Error:', msg, '\n' - help() - sys.exit(2) - - # Interpret options - try: - for opt, arg in opts: - if opt == '-M': magnify = float(eval(arg)) - if opt == '-d': debug = debug + 1 - if opt == '-l': looping = 1 - if opt == '-m': mindelta = float(eval(arg)) - if opt == '-n': nowait = 1 - if opt == '-q': quiet = 1 - if opt == '-r': regen = float(eval(arg)) - if opt == '-s': - try: - speed = float(eval(arg)) - except: - sys.stdout = sys.stderr - print 'Option -s needs float argument' - sys.exit(2) - if opt == '-t': - try: - import thread - threading = 1 - except ImportError: - print 'Sorry, this version of Python', - print 'does not support threads:', - print '-t ignored' - if opt == '-x': xoff = string.atoi(arg) - if opt == '-y': yoff = string.atoi(arg) - if opt == '-w': xwsiz = string.atoi(arg) - if opt == '-h': ywsiz = string.atoi(arg) - if opt == '-b': - if arg == 'black': - bgcolor = (0,0,0) - elif arg == 'white': - bgcolor = (255,255,255) - else: - try: - bgcolor = eval(arg) - xxr, xxg, xxb = bgcolor - except: - print '-b needs (r,g,b) tuple' - sys.exit(2) - except string.atoi_error: - sys.stdout = sys.stderr - print 'Option', opt, 'requires integer argument' - sys.exit(2) - - # Check validity of certain options combinations - if nowait and looping: - print 'Warning: -n and -l are mutually exclusive; -n ignored' - nowait = 0 - if xoff <> None and yoff == None: - print 'Warning: -x without -y ignored' - if xoff == None and yoff <> None: - print 'Warning: -y without -x ignored' - - # Process all files - if not args: args = ['film.video'] - sts = 0 - for filename in args: - sts = (process(filename) or sts) - - # Exit with proper exit status - sys.exit(sts) - - -# Process one movie file - -def process(filename): - try: - vin = VFile.VinFile(filename) - except IOError, msg: - sys.stderr.write(filename + ': I/O error: ' + `msg` + '\n') - return 1 - except VFile.Error, msg: - sys.stderr.write(msg + '\n') - return 1 - except EOFError: - sys.stderr.write(filename + ': EOF in video header\n') - return 1 - - if not quiet: - vin.printinfo() - - gl.foreground() - - width, height = int(vin.width * magnify), int(vin.height * magnify) - xborder = yborder = 0 - if xwsiz: - vin.xorigin = (xwsiz - width)/2 - width = xwsiz - if ywsiz: - vin.yorigin = (ywsiz - height)/2 - height = ywsiz - if xoff <> None and yoff <> None: - scrheight = gl.getgdesc(GL.GD_YPMAX) - gl.prefposition(xoff, xoff+width-1, \ - scrheight-yoff-height, scrheight-yoff-1) - else: - gl.prefsize(width, height) - - win = gl.winopen(filename) - gl.clear() - - if quiet: vin.quiet = 1 - vin.initcolormap() - - if bgcolor: - r, g, b = bgcolor - vin.clearto(r,g,b) - - gl.qdevice(ESCKEY) - gl.qdevice(WINSHUT) - gl.qdevice(WINQUIT) - gl.qdevice(LEFTMOUSE) - - stop = 0 - - while not stop: - gl.wintitle(filename) - stop = (playonce(vin) or nowait) - gl.wintitle('(done) ' + filename) - if not looping: - while not stop: - dev, val = gl.qread() - if dev == REDRAW: - if bgcolor: - r,g,b = bgcolor - vin.clearto(r,g,b) - else: - vin.clear() - if dev == LEFTMOUSE and val == 1: - break # Continue outer loop - if dev == ESCKEY and val == 1 or \ - dev in (WINSHUT, WINQUIT): - stop = 1 - - # Set xoff, yoff for the next window from the current window - global xoff, yoff - xoff, yoff = gl.getorigin() - width, height = gl.getsize() - scrheight = gl.getgdesc(GL.GD_YPMAX) - yoff = scrheight - yoff - height - gl.winclose(win) - - return 0 - - -# Play a movie once; return 1 if user wants to stop, 0 if not - -def playonce(vin): - vin.rewind() - vin.colormapinited = 1 - vin.magnify = magnify - - if threading: - MAXSIZE = 20 # Don't read ahead too much - import thread - import Queue - queue = Queue.Queue(MAXSIZE) - stop = [] - thread.start_new_thread(read_ahead, (vin, queue, stop)) - # Get the read-ahead thread going - while queue.qsize() < MAXSIZE/2 and not stop: - time.sleep(0.100) - - tin = 0 - toffset = 0 - oldtin = 0 - told = 0 - nin = 0 - nout = 0 - nlate = 0 - nskipped = 0 - data = None - - tlast = t0 = time.time() - - while 1: - if gl.qtest(): - dev, val = gl.qread() - if dev == ESCKEY and val == 1 or \ - dev in (WINSHUT, WINQUIT) or \ - dev == LEFTMOUSE and val == 1: - if debug: sys.stderr.write('\n') - if threading: - stop.append(None) - while 1: - item = queue.get() - if item == None: break - return (dev != LEFTMOUSE) - if dev == REDRAW: - gl.reshapeviewport() - if data: vin.showframe(data, cdata) - if threading: - if debug and queue.empty(): sys.stderr.write('.') - item = queue.get() - if item == None: break - tin, data, cdata = item - else: - try: - tin, size, csize = vin.getnextframeheader() - except EOFError: - break - tin = tin*0.001 - nin = nin+1 - if tin+toffset < oldtin: - print 'Fix reversed time:', oldtin, 'to', tin - toffset = oldtin - tin - tin = tin + toffset - oldtin = tin - if regen: tout = nin * regen - else: tout = tin - tout = tout / speed - if tout - told < mindelta: - nskipped = nskipped + 1 - if not threading: - vin.skipnextframedata(size, csize) - else: - if not threading: - try: - data, cdata = \ - vin.getnextframedata(size, csize) - except EOFError: - if not quiet: - print '[incomplete last frame]' - break - now = time.time() - dt = (tout-told) - (now-tlast) - told = tout - if debug: sys.stderr.write(`round(dt, 3)` + ' ') - if dt < 0: nlate = nlate + 1 - if dt > 0: - time.sleep(dt) - now = time.time() - tlast = now - vin.showframe(data, cdata) - nout = nout + 1 - - t1 = time.time() - - if debug: sys.stderr.write('\n') - - if quiet: return 0 - - print 'Recorded:', nin, 'frames in', round(tin, 3), 'sec.', - if tin: print '-- average', round(nin/tin, 1), 'frames/sec', - print - - if nskipped: print 'Skipped', nskipped, 'frames' - - tout = t1-t0 - print 'Played:', nout, - print 'frames in', round(tout, 3), 'sec.', - if tout: print '-- average', round(nout/tout, 1), 'frames/sec', - print - - if nlate: print 'There were', nlate, 'late frames' - - return 0 - - -# Read-ahead thread - -def read_ahead(vin, queue, stop): - try: - while not stop: queue.put(vin.getnextframe()) - except EOFError: - pass - queue.put(None) - stop.append(None) - - -# Don't forget to call the main program - -try: - main() -except KeyboardInterrupt: - print '[Interrupt]' diff --git a/Demo/sgi/video/Vrec.py b/Demo/sgi/video/Vrec.py deleted file mode 100755 index 11039bb..0000000 --- a/Demo/sgi/video/Vrec.py +++ /dev/null @@ -1,413 +0,0 @@ -#! /usr/bin/env python -#! /ufs/guido/bin/sgi/python-405 - -# Capture a CMIF movie using the Indigo video library and board - -# The CMIF video file format is documented in cmif-film.ms. -# Audio data is recorded in AIFF format, using the input sampling -# rate, source and volume set by the audio panel, in mono, 8 -# bits/sample. - - -# Usage and help functions (keep this up-to-date if you change the program!) - -def usage(): - print 'Usage: Vrec [options] [moviefile [audiofile]]' - print - print 'Options:' - print '-a : record audio as well' - print '-q queuesize : set the capture queue size (default 2)' - print '-r rate : capture 1 out of every "rate" frames', \ - '(default and min 2)' - print '-w width : initial window width', \ - '(default 256, use 0 for interactive placement)' - print '-n : Don\'t write to file, only timing info' - print '-d : drop fields if needed' - print '-g bits : greyscale (2, 4 or 8 bits)' - print '-G : 2-bit greyscale dithered' - print '-m : monochrome dithered' - print '-M value : monochrome thresholded with value' - print '-f : Capture fields (in stead of frames)' - print '-P frames : preallocate space for "frames" frames' - print 'moviefile : here goes the movie data (default film.video)' - print 'audiofile : with -a, here goes the audio data', \ - '(default film.aiff)' - -def help(): - print 'Press the left mouse button to start recording, release it to' - print 'end recording. You can record as many times as you wish, but' - print 'each recording overwrites the output file(s) -- only the last' - print 'recording is kept.' - print - print 'Press ESC or use the window manager Quit or Close window option' - print 'to quit. If you quit before recording anything, the output' - print 'file(s) are not touched.' - - -# Imported modules - -import sys -sys.path.append('/ufs/guido/src/video') -import sv, SV -import VFile -import gl, GL, DEVICE -import al, AL -import time -import posix -import getopt -import string -import imageop -import sgi - - -# Main program - -def main(): - format = SV.RGB8_FRAMES - qsize = 2 - audio = 0 - rate = 2 - width = 0 - norecord = 0 - drop = 0 - mono = 0 - grey = 0 - greybits = 0 - monotreshold = -1 - fields = 0 - preallocspace = 0 - - # Parse command line - try: - opts, args = getopt.getopt(sys.argv[1:], 'aq:r:w:ndg:mM:GfP:') - except getopt.error, msg: - sys.stdout = sys.stderr - print 'Error:', msg, '\n' - usage() - sys.exit(2) - - # Interpret options - try: - for opt, arg in opts: - if opt == '-a': - audio = 1 - elif opt == '-q': - qsize = string.atoi(arg) - elif opt == '-r': - rate = string.atoi(arg) - if rate < 2: - sys.stderr.write( \ - '-r rate must be >= 2\n') - sys.exit(2) - elif opt == '-w': - width = string.atoi(arg) - elif opt == '-n': - norecord = 1 - elif opt == '-d': - drop = 1 - elif opt == '-g': - grey = 1 - greybits = string.atoi(arg) - if not greybits in (2, 4, 8): - sys.stderr.write( \ - 'Only 2, 4 or 8 bit greyscale supported\n') - sys.exit(2) - elif opt == '-G': - grey = 1 - greybits = -2 - elif opt == '-m': - mono = 1 - elif opt == '-M': - mono = 1 - monotreshold = string.atoi(arg) - elif opt == '-f': - fields = 1 - elif opt == '-P': - preallocspace = string.atoi(arg) - except string.atoi_error: - sys.stdout = sys.stderr - print 'Option', opt, 'requires integer argument' - sys.exit(2) - - # Check excess arguments - # If norecord is on, refuse filename arguments - if norecord: - if args: - sys.stdout = sys.stderr - print 'With -n, no filename arguments are used\n' - usage() - sys.exit(2) - elif args[2:]: - sys.stdout = sys.stderr - print 'Too many filename arguments\n' - usage() - sys.exit(2) - - # Process file arguments - if args: - filename = args[0] - else: - filename = 'film.video' - - if args[1:] and not audio: - sys.stderr.write('-a turned on by appearance of 2nd file\n') - audio = 1 - - if audio: - if args[1:]: - audiofilename = args[1] - else: - audiofilename = 'film.aiff' - else: - audiofilename = None - - if norecord: - filename = audiofilename = '' - - # Open video - v = sv.OpenVideo() - # Determine maximum window size based on signal standard - param = [SV.BROADCAST, 0] - v.GetParam(param) - if param[1] == SV.PAL: - x = SV.PAL_XMAX - y = SV.PAL_YMAX - elif param[1] == SV.NTSC: - x = SV.NTSC_XMAX - y = SV.NTSC_YMAX - else: - print 'Unknown video standard', param[1] - sys.exit(1) - - gl.foreground() - gl.maxsize(x, y) - gl.keepaspect(x, y) - gl.stepunit(8, 6) - if width: - height = width*3/4 - x1 = 150 - x2 = x1 + width-1 - y2 = 768-150 - y1 = y2-height+1 - gl.prefposition(x1, x2, y1, y2) - win = gl.winopen(filename) - if width: - gl.maxsize(x, y) - gl.keepaspect(x, y) - gl.stepunit(8, 6) - gl.winconstraints() - x, y = gl.getsize() - print x, 'x', y - - v.SetSize(x, y) - - if drop: - param = [SV.FIELDDROP, 1, SV.GENLOCK, SV.GENLOCK_OFF] - else: - param = [SV.FIELDDROP, 0, SV.GENLOCK, SV.GENLOCK_ON] - if mono or grey: - param = param+[SV.COLOR, SV.MONO, SV.DITHER, 0, \ - SV.INPUT_BYPASS, 1] - else: - param = param+[SV.COLOR, SV.DEFAULT_COLOR, SV.INPUT_BYPASS, 0] - - v.BindGLWindow(win, SV.IN_REPLACE) - v.SetParam(param) - - gl.qdevice(DEVICE.LEFTMOUSE) - gl.qdevice(DEVICE.WINQUIT) - gl.qdevice(DEVICE.WINSHUT) - gl.qdevice(DEVICE.ESCKEY) - - help() - - while 1: - dev, val = gl.qread() - if dev == DEVICE.LEFTMOUSE: - if val == 1: - info = format, x, y, qsize, rate - record(v, info, filename, audiofilename,\ - mono, grey, greybits, monotreshold, \ - fields, preallocspace) - elif dev == DEVICE.REDRAW: - # Window resize (or move) - x, y = gl.getsize() - print x, 'x', y - v.SetSize(x, y) - v.BindGLWindow(win, SV.IN_REPLACE) - elif dev in (DEVICE.ESCKEY, DEVICE.WINQUIT, DEVICE.WINSHUT): - # Quit - v.CloseVideo() - gl.winclose(win) - break - - -# Record until the mouse is released (or any other GL event) -# XXX audio not yet supported - -def record(v, info, filename, audiofilename, mono, grey, greybits, \ - monotreshold, fields, preallocspace): - import thread - format, x, y, qsize, rate = info - fps = 59.64 # Fields per second - # XXX (Strange: need fps of Indigo monitor, not of PAL or NTSC!) - tpf = 1000.0 / fps # Time per field in msec - if filename: - vout = VFile.VoutFile(filename) - if mono: - format = 'mono' - elif grey and greybits == 8: - format = 'grey' - elif grey: - format = 'grey'+`abs(greybits)` - else: - format = 'rgb8' - vout.setformat(format) - vout.setsize(x, y) - if fields: - vout.setpf((1, -2)) - vout.writeheader() - if preallocspace: - print 'Preallocating space...' - vout.prealloc(preallocspace) - print 'done.' - MAXSIZE = 20 # XXX should be a user option - import Queue - queue = Queue.Queue(MAXSIZE) - done = thread.allocate_lock() - done.acquire_lock() - convertor = None - if grey: - if greybits == 2: - convertor = imageop.grey2grey2 - elif greybits == 4: - convertor = imageop.grey2grey4 - elif greybits == -2: - convertor = imageop.dither2grey2 - thread.start_new_thread(saveframes, \ - (vout, queue, done, mono, monotreshold, convertor)) - if audiofilename: - audiodone = thread.allocate_lock() - audiodone.acquire_lock() - audiostop = [] - initaudio(audiofilename, audiostop, audiodone) - gl.wintitle('(rec) ' + filename) - lastid = 0 - t0 = time.time() - count = 0 - ids = [] - v.InitContinuousCapture(info) - while not gl.qtest(): - try: - cd, id = v.GetCaptureData() - except sv.error: - #time.sleep(0.010) # XXX is this necessary? - sgi.nap(1) # XXX Try by Jack - continue - ids.append(id) - - id = id + 2*rate -## if id <> lastid + 2*rate: -## print lastid, id - lastid = id - count = count+1 - if fields: - data1, data2 = cd.GetFields() - cd.UnlockCaptureData() - if filename: - queue.put((data1, int(id*tpf))) - queue.put((data2, int((id+1)*tpf))) - else: - data = cd.InterleaveFields(1) - cd.UnlockCaptureData() - if filename: - queue.put((data, int(id*tpf))) - t1 = time.time() - gl.wintitle('(busy) ' + filename) - print lastid, 'fields in', round(t1-t0, 3), 'sec', - print '--', round(lastid/(t1-t0), 1), 'fields/sec' - print 'Captured',count*2, 'fields,', - print round(count*2/(t1-t0), 1), 'f/s', - if lastid: - print '(', - print round(count*200.0/lastid), '%, or', - print round(count*rate*200.0/lastid), '% of wanted rate )', - print - if ids: - print 'Ids:', - t0 = ids[0] - del ids[0] - for t1 in ids: - print t1-t0, - t0 = t1 - print - if filename and audiofilename: - audiostop.append(None) - audiodone.acquire_lock() - v.EndContinuousCapture() - if filename: - queue.put(None) # Sentinel - done.acquire_lock() - gl.wintitle('(done) ' + filename) - - -# Thread to save the frames to the file - -def saveframes(vout, queue, done, mono, monotreshold, convertor): - while 1: - x = queue.get() - if not x: - break - data, t = x - if convertor: - data = convertor(data, len(data), 1) - elif mono and monotreshold >= 0: - data = imageop.grey2mono(data, len(data), 1,\ - monotreshold) - elif mono: - data = imageop.dither2mono(data, len(data), 1) - vout.writeframe(t, data, None) - sys.stderr.write('Done writing video\n') - vout.close() - done.release_lock() - - -# Initialize audio recording - -AQSIZE = 8000 # XXX should be a user option - -def initaudio(filename, stop, done): - import thread, aifc - afile = aifc.open(filename, 'w') - afile.setnchannels(AL.MONO) - afile.setsampwidth(AL.SAMPLE_8) - params = [AL.INPUT_RATE, 0] - al.getparams(AL.DEFAULT_DEVICE, params) - print 'audio sampling rate =', params[1] - afile.setframerate(params[1]) - c = al.newconfig() - c.setchannels(AL.MONO) - c.setqueuesize(AQSIZE) - c.setwidth(AL.SAMPLE_8) - aport = al.openport(filename, 'r', c) - thread.start_new_thread(audiorecord, (afile, aport, stop, done)) - - -# Thread to record audio samples - -def audiorecord(afile, aport, stop, done): - while not stop: - data = aport.readsamps(AQSIZE/2) - afile.writesampsraw(data) - del data - afile.close() - print 'Done writing audio' - done.release_lock() - - -# Don't forget to call the main program - -try: - main() -except KeyboardInterrupt: - print '[Interrupt]' diff --git a/Demo/sgi/video/Vrecb.py b/Demo/sgi/video/Vrecb.py deleted file mode 100755 index 5cdde9e..0000000 --- a/Demo/sgi/video/Vrecb.py +++ /dev/null @@ -1,429 +0,0 @@ -#! /usr/bin/env python - -# Capture a CMIF movie using the Indigo video library and board in burst mode - - -# User interface: -# -# Start the application. Resize the window to the desired movie size. -# Press the left mouse button to start recording, release it to end -# recording. You can record as many times as you wish, but each time -# you overwrite the output file(s), so only the last recording is -# kept. -# -# Press ESC or select the window manager Quit or Close window option -# to quit. If you quit before recording anything, the output file(s) -# are not touched. - - -import sys -sys.path.append('/ufs/guido/src/video') -import sv, SV -import VFile -import gl, GL, DEVICE -import al, AL -import time -import posix -import getopt -import string -import imageop -import sgi - - -# Usage and help functions (keep this up-to-date if you change the program!) - -def usage(): - print 'Usage: Vrecb [options] [moviefile [audiofile]]' - print - print 'Options:' - print '-a : record audio as well' - print '-r rate : capture 1 out of every "rate" frames', \ - '(default and min 1)' - print '-w width : initial window width', \ - '(default 256, use 0 for interactive placement)' - print '-d : drop fields if needed' - print '-g bits : greyscale (2, 4 or 8 bits)' - print '-G : 2-bit greyscale dithered' - print '-m : monochrome dithered' - print '-M value : monochrome thresholded with value' - print '-f : Capture fields (instead of frames)' - print '-n number : Capture this many frames (default 60)' - print '-N memsize : Capture frames fitting in this many kbytes' - print 'moviefile : here goes the movie data (default film.video)' - -def help(): - print 'Press the left mouse button to start recording.' - print 'Recording time is determined by the -n option.' - print 'You can record as many times as you wish, but each' - print 'recording overwrites the output file(s) -- only the' - print 'last recording is kept.' - print - print 'Press ESC or use the window manager Quit or Close window option' - print 'to quit. If you quit before recording anything, the output' - print 'file(s) are not touched.' - - -# Main program - -def main(): - format = SV.RGB8_FRAMES - audio = 0 - rate = 1 - width = 256 - drop = 0 - mono = 0 - grey = 0 - greybits = 0 - monotreshold = -1 - fields = 0 - number = 0 - memsize = 0 - - try: - opts, args = getopt.getopt(sys.argv[1:], 'ar:w:dg:mM:Gfn:N:') - except getopt.error, msg: - sys.stdout = sys.stderr - print 'Error:', msg, '\n' - usage() - sys.exit(2) - - try: - for opt, arg in opts: - if opt == '-a': - audio = 1 - if opt == '-r': - rate = string.atoi(arg) - if rate < 1: - sys.stderr.write('-r rate must be >= 1\n') - sys.exit(2) - elif opt == '-w': - width = string.atoi(arg) - elif opt == '-d': - drop = 1 - elif opt == '-g': - grey = 1 - greybits = string.atoi(arg) - if not greybits in (2,4,8): - sys.stderr.write( \ - 'Only 2, 4 or 8 bit greyscale supported\n') - sys.exit(2) - elif opt == '-G': - grey = 1 - greybits = -2 - elif opt == '-m': - mono = 1 - elif opt == '-M': - mono = 1 - monotreshold = string.atoi(arg) - elif opt == '-f': - fields = 1 - elif opt == '-n': - number = string.atoi(arg) - elif opt == '-N': - memsize = string.atoi(arg) - if 0 < memsize < 1024: - memsize = memsize * 1024 - if 0 < memsize < 1024*1024: - memsize = memsize * 1024 - print 'memsize', memsize - except string.atoi_error: - sys.stdout = sys.stderr - print 'Option', opt, 'requires integer argument' - sys.exit(2) - - if number <> 0 and memsize <> 0: - sys.stderr.write('-n and -N are mutually exclusive\n') - sys.exit(2) - if number == 0 and memsize == 0: - number = 60 - - if not fields: - print '-f option assumed until somebody fixes it' - fields = 1 - - if args[2:]: - sys.stderr.write('usage: Vrecb [options] [file [audiofile]]\n') - sys.exit(2) - - if args: - filename = args[0] - else: - filename = 'film.video' - - if args[1:] and not audio: - sys.stderr.write('-a turned on by appearance of 2nd file\n') - audio = 1 - - if audio: - if args[1:]: - audiofilename = args[1] - else: - audiofilename = 'film.aiff' - else: - audiofilename = None - - v = sv.OpenVideo() - # Determine maximum window size based on signal standard - param = [SV.BROADCAST, 0] - v.GetParam(param) - if param[1] == SV.PAL: - x = SV.PAL_XMAX - y = SV.PAL_YMAX - elif param[1] == SV.NTSC: - x = SV.NTSC_XMAX - y = SV.NTSC_YMAX - else: - print 'Unknown video standard', param[1] - sys.exit(1) - - gl.foreground() - gl.maxsize(x, y) - gl.keepaspect(x, y) - gl.stepunit(8, 6) - if width: - height = width*3/4 - x1 = 150 - x2 = x1 + width-1 - y2 = 768-150 - y1 = y2-height+1 - gl.prefposition(x1, x2, y1, y2) - win = gl.winopen(filename) - if width: - gl.maxsize(x, y) - gl.keepaspect(x, y) - gl.stepunit(8, 6) - gl.winconstraints() - x, y = gl.getsize() - print x, 'x', y - if memsize: - number = calcnumber(x, y, grey or mono, memsize) - print number, 'frames' - v.SetSize(x, y) - - if drop: - param = [SV.FIELDDROP, 1, SV.GENLOCK, SV.GENLOCK_OFF] - else: - param = [SV.FIELDDROP, 0, SV.GENLOCK, SV.GENLOCK_ON] - if mono or grey: - param = param+[SV.COLOR, SV.MONO, SV.DITHER, 0, \ - SV.INPUT_BYPASS, 1] - else: - param = param+[SV.COLOR, SV.DEFAULT_COLOR, SV.INPUT_BYPASS, 0] - - v.BindGLWindow(win, SV.IN_REPLACE) - v.SetParam(param) - - gl.qdevice(DEVICE.LEFTMOUSE) - gl.qdevice(DEVICE.WINQUIT) - gl.qdevice(DEVICE.WINSHUT) - gl.qdevice(DEVICE.ESCKEY) - - help() - - while 1: - dev, val = gl.qread() - if dev == DEVICE.LEFTMOUSE: - if val == 1: - info = format, x, y, number, rate - record(v, info, filename, audiofilename, \ - mono, grey, \ - greybits, monotreshold, fields) - elif dev == DEVICE.REDRAW: - # Window resize (or move) - x, y = gl.getsize() - print x, 'x', y - if memsize: - number = calcnumber(x, y, grey or mono, memsize) - print number, 'frames' - v.SetSize(x, y) - v.BindGLWindow(win, SV.IN_REPLACE) - elif dev in (DEVICE.ESCKEY, DEVICE.WINQUIT, DEVICE.WINSHUT): - # Quit - v.CloseVideo() - gl.winclose(win) - break - - -def calcnumber(x, y, grey, memsize): - pixels = x*y - pixels = pixels/2 # XXX always assume fields - if grey: n = memsize/pixels - else: n = memsize/(4*pixels) - return max(1, n) - - -# Record until the mouse is released (or any other GL event) -# XXX audio not yet supported - -def record(v, info, filename, audiofilename, \ - mono, grey, greybits, monotreshold, fields): - import thread - format, x, y, number, rate = info - fps = 59.64 # Fields per second - # XXX (Strange: need fps of Indigo monitor, not of PAL or NTSC!) - tpf = 1000.0 / fps # Time per field in msec - # - # Go grab - # - if audiofilename: - gl.wintitle('(start audio) ' + filename) - audiodone = thread.allocate_lock() - audiodone.acquire_lock() - audiostart = thread.allocate_lock() - audiostart.acquire_lock() - audiostop = [] - initaudio(audiofilename, audiostop, audiostart, audiodone) - audiostart.acquire_lock() - gl.wintitle('(rec) ' + filename) - try: - ninfo, data, bitvec = v.CaptureBurst(info) - except sv.error, arg: - print 'CaptureBurst failed:', arg - print 'info:', info - gl.wintitle(filename) - return - gl.wintitle('(save) '+ filename) - # - # Check results - # - if info <> ninfo: - print 'Sorry, format changed.' - print 'Wanted:',info - print 'Got :',ninfo - gl.wintitle(filename) - return - # print bitvec - if x*y*number <> len(data): - print 'Funny data length: wanted',x,'*',y,'*', number,'=',\ - x*y*number,'got',len(data) - gl.wintitle(filename) - return - # - # Save - # - if filename and audiofilename: - audiostop.append(None) - audiodone.acquire_lock() - if filename: - # - # Construct header and write it - # - try: - vout = VFile.VoutFile(filename) - except IOError, msg: - print filename, ':', msg - sys.exit(1) - if mono: - vout.format = 'mono' - elif grey and greybits == 8: - vout.format = 'grey' - elif grey: - vout.format = 'grey'+`abs(greybits)` - else: - vout.format = 'rgb8' - vout.width = x - vout.height = y - if fields: - vout.packfactor = (1,-2) - else: - print 'Sorry, can only save fields at the moment' - print '(i.e. you *must* use the -f option)' - gl.wintitle(filename) - return - vout.writeheader() - # - # Compute convertor, if needed - # - convertor = None - if grey: - if greybits == 2: - convertor = imageop.grey2grey2 - elif greybits == 4: - convertor = imageop.grey2grey4 - elif greybits == -2: - convertor = imageop.dither2grey2 - fieldsize = x*y/2 - nskipped = 0 - realframeno = 0 - tpf = 1000 / 50.0 #XXXX - # Trying to find the pattern in frame skipping - okstretch = 0 - skipstretch = 0 - for frameno in range(0, number*2): - if frameno <> 0 and \ - bitvec[frameno] == bitvec[frameno-1]: - nskipped = nskipped + 1 - if okstretch: - print okstretch, 'ok', - okstretch = 0 - skipstretch = skipstretch + 1 - continue - if skipstretch: - print skipstretch, 'skipped' - skipstretch = 0 - okstretch = okstretch + 1 - # - # Save field. - # XXXX Works only for fields and top-to-bottom - # - start = frameno*fieldsize - field = data[start:start+fieldsize] - if convertor: - field = convertor(field, len(field), 1) - elif mono and monotreshold >= 0: - field = imageop.grey2mono( \ - field, len(field), 1, monotreshold) - elif mono: - field = imageop.dither2mono( \ - field, len(field), 1) - realframeno = realframeno + 1 - vout.writeframe(int(realframeno*tpf), field, None) - print okstretch, 'ok', - print skipstretch, 'skipped' - print 'Skipped', nskipped, 'duplicate frames' - vout.close() - - gl.wintitle('(done) ' + filename) -# Initialize audio recording - -AQSIZE = 8*8000 # XXX should be a user option - -def initaudio(filename, stop, start, done): - import thread, aifc - afile = aifc.open(filename, 'w') - afile.setnchannels(AL.MONO) - afile.setsampwidth(AL.SAMPLE_8) - params = [AL.INPUT_RATE, 0] - al.getparams(AL.DEFAULT_DEVICE, params) - print 'audio sampling rate =', params[1] - afile.setframerate(params[1]) - c = al.newconfig() - c.setchannels(AL.MONO) - c.setqueuesize(AQSIZE) - c.setwidth(AL.SAMPLE_8) - aport = al.openport(filename, 'r', c) - thread.start_new_thread(audiorecord, (afile, aport, stop, start, done)) - - -# Thread to record audio samples - -def audiorecord(afile, aport, stop, start, done): - start.release_lock() - leeway = 4 - while leeway > 0: - if stop: - leeway = leeway - 1 - data = aport.readsamps(AQSIZE/8) - afile.writesampsraw(data) - del data - afile.close() - print 'Done writing audio' - done.release_lock() - - -# Don't forget to call the main program - -try: - main() -except KeyboardInterrupt: - print '[Interrupt]' diff --git a/Demo/sgi/video/Vreceive.py b/Demo/sgi/video/Vreceive.py deleted file mode 100755 index 84aa5a5..0000000 --- a/Demo/sgi/video/Vreceive.py +++ /dev/null @@ -1,135 +0,0 @@ -#! /usr/bin/env python - -# Receive live video UDP packets. -# Usage: Vreceive [port] - -import sys -import struct -from socket import * # syscalls and support functions -from SOCKET import * # -from IN import * # -import select -import struct -import gl, GL, DEVICE -sys.path.append('/ufs/guido/src/video') -import LiveVideoOut -import regsub -import getopt - -from senddefs import * - - -# Print usage message and exit(2). - -def usage(msg): - print msg - print 'usage: Vreceive [-m mcastgrp] [-p port] [-c type]' - print '-m mcastgrp: multicast group (default ' + `DEFMCAST` + ')' - print '-p port : port (default ' + `DEFPORT` + ')' - print '-c type : signal type: rgb8, grey or mono (default rgb8)' - sys.exit(2) - - -# Main program: parse options and main loop. - -def main(): - - sys.stdout = sys.stderr - - group = DEFMCAST - port = DEFPORT - width = DEFWIDTH - height = DEFHEIGHT - vtype = 'rgb8' - - try: - opts, args = getopt.getopt(sys.argv[1:], 'm:p:c:') - except getopt.error, msg: - usage(msg) - - try: - for opt, optarg in opts: - if opt == '-p': - port = string.atoi(optarg) - if opt == '-m': - group = gethostbyname(optarg) - if opt == '-c': - vtype = optarg - except string.atoi_error, msg: - usage('bad integer: ' + msg) - - s = opensocket(group, port) - - gl.foreground() - gl.prefsize(width, height) - wid = gl.winopen('Vreceive') - gl.winconstraints() - gl.qdevice(DEVICE.ESCKEY) - gl.qdevice(DEVICE.WINSHUT) - gl.qdevice(DEVICE.WINQUIT) - - lvo = LiveVideoOut.LiveVideoOut(wid, width, height, vtype) - - ifdlist = [gl.qgetfd(), s.fileno()] - ofdlist = [] - xfdlist = [] - timeout = 1.0 - selectargs = (ifdlist, ofdlist, xfdlist, timeout) - - while 1: - - if gl.qtest(): - dev, val = gl.qread() - if dev in (DEVICE.ESCKEY, \ - DEVICE.WINSHUT, DEVICE.WINQUIT): - break - if dev == DEVICE.REDRAW: - lvo.reshapewindow() - elif s.avail(): - data = s.recv(16*1024) - pos, w, h = struct.unpack('hhh', data[:6]) - if (w, h) <> (width, height): - x, y = gl.getorigin() - y = y + height - h - gl.winposition(x, x+w-1, y, y+h-1) - width, height = w, h - lvo.resizevideo(width, height) - lvo.putnextpacket(pos, data[6:]) - else: - x = select.select(selectargs) - - lvo.close() - - -# Subroutine to create and properly initialize the receiving socket - -def opensocket(group, port): - - # Create the socket - s = socket(AF_INET, SOCK_DGRAM) - - # Allow multiple copies of this program on one machine - s.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1) # (Not strictly needed) - - # Bind the port to it - s.bind('', port) - - # Look up the group once - group = gethostbyname(group) - - # Construct binary group address - group_bytes = eval(regsub.gsub('\.', ',', group)) - grpaddr = 0 - for byte in group_bytes: grpaddr = (grpaddr << 8) | byte - - # Construct struct mreq from grpaddr and ifaddr - ifaddr = INADDR_ANY - mreq = struct.pack('ll', grpaddr, ifaddr) - - # Add group membership - s.setsockopt(IPPROTO_IP, IP_ADD_MEMBERSHIP, mreq) - - return s - - -main() diff --git a/Demo/sgi/video/Vsend.py b/Demo/sgi/video/Vsend.py deleted file mode 100755 index 4c47861..0000000 --- a/Demo/sgi/video/Vsend.py +++ /dev/null @@ -1,152 +0,0 @@ -#! /usr/bin/env python - -# Send live video UDP packets. -# Usage: Vsend [-b] [-h height] [-p port] [-s size] [-t ttl] [-w width] -# [host] .. - -import sys -import time -import struct -import string -from socket import * -from SOCKET import * -import gl, GL, DEVICE -sys.path.append('/ufs/guido/src/video') -import LiveVideoIn -import LiveVideoOut -import SV -import getopt -from IN import * - -from senddefs import * - -def usage(msg): - print msg - print 'usage: Vsend [-b] [-h height] [-p port] [-s size] [-t ttl] [-c type] [-m]', - print '[-w width] [host] ...' - print '-b : broadcast on local net' - print '-h height : window height (default ' + `DEFHEIGHT` + ')' - print '-p port : port to use (default ' + `DEFPORT` + ')' - print '-t ttl : time-to-live (multicast only; default 1)' - print '-s size : max packet size (default ' + `DEFPKTMAX` + ')' - print '-w width : window width (default ' + `DEFWIDTH` + ')' - print '-c type : Type: rgb8, mono or grey (default rgb8)' - print '[host] ...: host(s) to send to (default multicast to ' + \ - DEFMCAST + ')' - sys.exit(2) - - -def main(): - sys.stdout = sys.stderr - - hosts = [] - port = DEFPORT - ttl = -1 - pktmax = DEFPKTMAX - width = DEFWIDTH - height = DEFHEIGHT - vtype = 'rgb8' - - try: - opts, args = getopt.getopt(sys.argv[1:], 'bh:p:s:t:w:c:') - except getopt.error, msg: - usage(msg) - - try: - for opt, optarg in opts: - if opt == '-p': - port = string.atoi(optarg) - if opt == '-b': - host = '' - if opt == '-t': - ttl = string.atoi(optarg) - if opt == '-s': - pktmax = string.atoi(optarg) - if opt == '-w': - width = string.atoi(optarg) - if opt == '-h': - height = string.atoi(optarg) - if opt == '-c': - vtype = optarg - except string.atoi_error, msg: - usage('bad integer: ' + msg) - - for host in args: - hosts.append(gethostbyname(host)) - - if not hosts: - hosts.append(gethostbyname(DEFMCAST)) - - if not LiveVideoIn.have_video: - print 'Sorry, no video available (use python-405)' - sys.exit(1) - - gl.foreground() - gl.prefsize(width, height) - gl.stepunit(8, 6) - wid = gl.winopen('Vsend') - gl.keepaspect(width, height) - gl.stepunit(8, 6) - gl.maxsize(SV.PAL_XMAX, SV.PAL_YMAX) - gl.winconstraints() - gl.qdevice(DEVICE.ESCKEY) - gl.qdevice(DEVICE.WINSHUT) - gl.qdevice(DEVICE.WINQUIT) - gl.qdevice(DEVICE.WINFREEZE) - gl.qdevice(DEVICE.WINTHAW) - width, height = gl.getsize() - - lvo = LiveVideoOut.LiveVideoOut(wid, width, height, vtype) - - lvi = LiveVideoIn.LiveVideoIn(pktmax, width, height, vtype) - - s = socket(AF_INET, SOCK_DGRAM) - s.setsockopt(SOL_SOCKET, SO_BROADCAST, 1) - if ttl >= 0: - s.setsockopt(IPPROTO_IP, IP_MULTICAST_TTL, chr(ttl)) - - frozen = 0 - - while 1: - - if gl.qtest(): - dev, val = gl.qread() - if dev in (DEVICE.ESCKEY, \ - DEVICE.WINSHUT, DEVICE.WINQUIT): - break - if dev == DEVICE.WINFREEZE: - frozen = 1 - if dev == DEVICE.WINTHAW: - frozen = 0 - if dev == DEVICE.REDRAW: - w, h = gl.getsize() - x, y = gl.getorigin() - if (w, h) <> (width, height): - width, height = w, h - lvi.resizevideo(width, height) - lvo.resizevideo(width, height) - - rv = lvi.getnextpacket() - if not rv: - time.sleep(0.010) - continue - - pos, data = rv - - if not frozen: - lvo.putnextpacket(pos, data) - - hdr = struct.pack('hhh', pos, width, height) - for host in hosts: - try: - s.sendto(hdr + data, (host, port)) - except error, msg: # really socket.error - if msg[0] <> 121: # no buffer space available - raise error, msg # re-raise it - print 'Warning:', msg[1] - - lvi.close() - lvo.close() - - -main() diff --git a/Demo/sgi/video/Vstat.py b/Demo/sgi/video/Vstat.py deleted file mode 100755 index a29b1ff..0000000 --- a/Demo/sgi/video/Vstat.py +++ /dev/null @@ -1,23 +0,0 @@ -#! /usr/bin/env python - -# Print the value of all video parameters - -import sys -import sv, SV - -def main(): - v = sv.OpenVideo() - for name in dir(SV): - const = getattr(SV, name) - if type(const) is type(0): - sys.stdout.flush() - params = [const, 0] - try: - v.GetParam(params) - except sv.error, msg: -## print name, msg - continue - print name, params - -main() - diff --git a/Demo/sgi/video/Vtime.py b/Demo/sgi/video/Vtime.py deleted file mode 100755 index 651deee..0000000 --- a/Demo/sgi/video/Vtime.py +++ /dev/null @@ -1,117 +0,0 @@ -#! /usr/bin/env python - -# Manipulate the time base of CMIF movies - - -# Possibilities: -# -# - resample at a fixed rate -# - divide the time codes by a speed factor (to make it go faster/slower) -# - drop frames that are less than n msec apart (to accommodate slow players) - - -# Usage: -# -# Vtime [-m msec] [-r msec] [-s speed] [infile [outfile]] - - -# Options: -# -# -m n : drop frames closer than n msec (default 0) -# -r n : regenerate input time base n msec apart -# -s speed : speed change factor after other processing (default 1.0) -# infile : input file (default film.video) -# outfile : output file (default out.video) - - -import sys -sys.path.append('/ufs/guido/src/video') -import VFile -import getopt -import string - - -# Global options - -speed = 1.0 -mindelta = 0 -regen = None - - -# Main program -- mostly command line parsing - -def main(): - global speed, mindelta - opts, args = getopt.getopt(sys.argv[1:], 'm:r:s:') - for opt, arg in opts: - if opt == '-m': - mindelta = string.atoi(arg) - elif opt == '-r': - regen = string.atoi(arg) - elif opt == '-s': - speed = float(eval(arg)) - if len(args) < 1: - args.append('film.video') - if len(args) < 2: - args.append('out.video') - if len(args) > 2: - sys.stderr.write('usage: Vtime [options] [infile [outfile]]\n') - sys.exit(2) - sts = process(args[0], args[1]) - sys.exit(sts) - - -# Copy one file to another - -def process(infilename, outfilename): - try: - vin = VFile.BasicVinFile(infilename) - except IOError, msg: - sys.stderr.write(infilename + ': I/O error: ' + `msg` + '\n') - return 1 - except VFile.Error, msg: - sys.stderr.write(msg + '\n') - return 1 - except EOFError: - sys.stderr.write(infilename + ': EOF in video file\n') - return 1 - - try: - vout = VFile.BasicVoutFile(outfilename) - except IOError, msg: - sys.stderr.write(outfilename + ': I/O error: ' + `msg` + '\n') - return 1 - - vout.setinfo(vin.getinfo()) - vout.writeheader() - - told = 0 - nin = 0 - nout = 0 - tin = 0 - tout = 0 - - while 1: - try: - tin, data, cdata = vin.getnextframe() - except EOFError: - break - nin = nin + 1 - if regen: - tout = nin * regen - else: - tout = tin - tout = int(tout / speed) - if tout - told < mindelta: - continue - told = tout - vout.writeframe(tout, data, cdata) - nout = nout + 1 - - vout.close() - vin.close() - - -# Don't forget to call the main program - -main() diff --git a/Demo/sgi/video/Vunjpeg.py b/Demo/sgi/video/Vunjpeg.py deleted file mode 100755 index 3321d23..0000000 --- a/Demo/sgi/video/Vunjpeg.py +++ /dev/null @@ -1,97 +0,0 @@ -#! /usr/bin/env python - -# Decompress a jpeg or jpeggrey video file to rgb format - - -# Usage: -# -# Vunjpeg [infile [outfile]] - - -# Options: -# -# infile : input file (default film.video) -# outfile : output file (default out.video) - - -import sys -import jpeg -sys.path.append('/ufs/guido/src/video') -import VFile - - -# Main program -- mostly command line parsing - -def main(): - args = sys.argv[1:] - if len(args) < 1: - args.append('film.video') - if len(args) < 2: - args.append('out.video') - if len(args) > 2: - sys.stderr.write('usage: Vunjpeg [infile [outfile]]\n') - sys.exit(2) - sts = process(args[0], args[1]) - sys.exit(sts) - - -# Copy one file to another - -def process(infilename, outfilename): - try: - vin = VFile.BasicVinFile(infilename) - except IOError, msg: - sys.stderr.write(infilename + ': I/O error: ' + `msg` + '\n') - return 1 - except VFile.Error, msg: - sys.stderr.write(msg + '\n') - return 1 - except EOFError: - sys.stderr.write(infilename + ': EOF in video file\n') - return 1 - - try: - vout = VFile.BasicVoutFile(outfilename) - except IOError, msg: - sys.stderr.write(outfilename + ': I/O error: ' + `msg` + '\n') - return 1 - - info = vin.getinfo() - if info[0] == 'jpeg': - format = 'rgb' - width, height = vin.getsize() - bytes = 4 - elif info[0] == 'jpeggrey': - format = 'grey' - width, height = vin.getsize() - pf = vin.packfactor - width, height = width/pf, height/pf - bytes = 1 - else: - sys.stderr.write('Vunjpeg: input not in jpeg[grey] format\n') - return 1 - info = (format,) + info[1:] - vout.setinfo(info) - vout.writeheader() - sts = 0 - n = 0 - try: - while 1: - t, data, cdata = vin.getnextframe() - n = n + 1 - sys.stderr.write('Frame ' + `n` + '...') - data, w, h, b = jpeg.decompress(data) - if (w, h, b) <> (width, height, bytes): - sys.stderr.write('jpeg data has wrong size\n') - sts = 1 - else: - vout.writeframe(t, data, None) - sys.stderr.write('\n') - except EOFError: - pass - return sts - - -# Don't forget to call the main program - -main() diff --git a/Demo/sgi/video/aplay.py b/Demo/sgi/video/aplay.py deleted file mode 100755 index a11f95a..0000000 --- a/Demo/sgi/video/aplay.py +++ /dev/null @@ -1,167 +0,0 @@ -#! /usr/bin/env python - -# Play synchronous video and audio. -# Highly experimental! - -import sys -import getopt -import string -import os - -import VFile -import aifc - -import gl, GL, DEVICE -import al, AL - - -def usage(): - sys.stderr.write( \ - 'usage: aplay [-o offset] [-q qsize] videofile audiofile\n') - sys.exit(2) - -def main(): - offset = 0 - qsize = 0 # This defaults to 1/10 second of sound - videofile = 'film.video' - audiofile = 'film.aiff' - - try: - opts, args = getopt.getopt(sys.argv[1:], 'o:q:') - except getopt.error, msg: - sys.stderr.write(msg + '\n') - usage() - - try: - for o, a in opts: - if o == '-o': - offset = string.atoi(a) - if o == '-q': - qsize = string.atoi(a) - except string.atoi_error: - sys.stderr.write(o + ' arg must be integer\n') - usage() - - if len(args) > 2: - usage() - - if args: videofile = args[0] - if args[1:]: audiofile = args[1] - - if not os.path.exists(videofile) and \ - os.path.exists(videofile + '.video'): - if not args[1:] and os.path.exists(videofile + '.aiff'): - audiofile = videofile + '.aiff' - videofile = videofile + '.video' - - print 'Opening video input file..' - vin = VFile.VinFile(videofile) - - print 'Opening audio input file..' - ain = aifc.open(audiofile, 'r') - print 'rate :', ain.getframerate() - print 'channels:', ain.getnchannels() - print 'frames :', ain.getnframes() - print 'width :', ain.getsampwidth() - print 'kbytes :', \ - ain.getnframes() * ain.getnchannels() * ain.getsampwidth() - - print 'Opening audio output port..' - c = al.newconfig() - c.setchannels(ain.getnchannels()) - c.setwidth(ain.getsampwidth()) - nullsample = '\0' * ain.getsampwidth() - samples_per_second = ain.getnchannels() * ain.getframerate() - if qsize <= 0: qsize = samples_per_second / 10 - qsize = max(qsize, 512) - c.setqueuesize(qsize) - saveparams = [AL.OUTPUT_RATE, 0] - al.getparams(AL.DEFAULT_DEVICE, saveparams) - newparams = [AL.OUTPUT_RATE, ain.getframerate()] - al.setparams(AL.DEFAULT_DEVICE, newparams) - aport = al.openport(audiofile, 'w', c) - - print 'Opening video output window..' - gl.foreground() - gl.prefsize(vin.width, vin.height) - wid = gl.winopen(videofile + ' + ' + audiofile) - gl.clear() - vin.initcolormap() - - print 'Playing..' - gl.qdevice(DEVICE.ESCKEY) - gl.qdevice(DEVICE.LEFTARROWKEY) - gl.qdevice(DEVICE.RIGHTARROWKEY) -## gl.qdevice(DEVICE.UPARROWKEY) -## gl.qdevice(DEVICE.DOWNARROWKEY) - gl.qdevice(DEVICE.SPACEKEY) - - while 1: - samples_written = 0 - samples_read = 0 - lastt = 0 - pause = 0 - while 1: - if gl.qtest(): - dev, val = gl.qread() - if val == 1: - if dev == DEVICE.ESCKEY: - sys.exit(0) - elif dev == DEVICE.LEFTARROWKEY: - offset = offset - 100 - print 'offset =', offset - elif dev == DEVICE.RIGHTARROWKEY: - offset = offset + 100 - print 'offset =', offset - elif dev == DEVICE.SPACEKEY: - pause = (not pause) - - if pause: - continue - - try: - t, data, cdata = vin.getnextframe() - except EOFError: - break - t = int(t) - dt = t - lastt - lastt = t - target = samples_per_second * t / 1000 - n = target - samples_written + qsize - offset - if n > 0: - # This call will block until the time is right: - try: - samples = ain.readframes(n) - except EOFError: - samples = '' - k = len(samples) / len(nullsample) - samples_read = samples_read + k - if k < n: - samples = samples + (n-k) * nullsample - aport.writesamps(samples) - samples_written = samples_written + n - vin.showframe(data, cdata) - - while 1: - try: - samples = ain.readframes(qsize) - except EOFError: - break - if not samples: - break - aport.writesamps(samples) - k = len(samples) / len(nullsample) - samples_read = samples_read + k - samples_written = samples_written + k - - print samples_read, 'samples ==', - print samples_read * 1.0 / samples_per_second, 'sec.' - print lastt, 'milliseconds' - - print 'Restarting..' - ain.close() - ain = aifc.open(audiofile, 'r') - vin.rewind() - - -main() diff --git a/Demo/sgi/video/cmif-film.ms b/Demo/sgi/video/cmif-film.ms deleted file mode 100755 index aa114d9..0000000 --- a/Demo/sgi/video/cmif-film.ms +++ /dev/null @@ -1,200 +0,0 @@ -.de PP -.LP -.. -.de pT -.IP \fB\\$1\fP -.. -.TL -CMIF video file format -.AU -Jack Jansen -(Version of 27-Feb-92) -.SH -Introduction -.PP -The CMIF video format was invented to allow various applications -to exchange video data. The format consists of -a header containing global information (like data format) -followed by a sequence of frames, each consisting of a header -followed by the actual frame data. -All information except pixel data is -encoded in ASCII. Pixel data is \fIalways\fP encoded in Silicon Graphics -order, which means that the first pixel in the frame is the lower left -pixel on the screen. -.PP -All ASCII data except the first line of the file -is in python format. This means that -outer parentheses can be ommitted, and parentheses around a tuple with -one element can also be omitted. So, the lines -.IP -.ft C -.nf -('grey',(4)) -('grey',4) -'grey',4 -.LP -have the same meaning. -To ease parsing in C programs, however, it is advised that there are -no parenteses around single items, and that there are parentheses around -lists. So, the second format above is preferred. -.PP -The current version is version 3, but this document will also explain -shortly what the previous formats looked like. -.SH -Header. -.PP -The header consists of three lines. The first line identifies the file -as a CMIF video file, and gives the version number. -It looks as follows: -.IP -.ft C -CMIF video 3.0 -.LP -All programs expect the layout to be exactly like this, so no -extra spaces, etc. should be added. -.PP -The second line specifies the data format. Its format is a python -tuple with two members. The first member is a string giving the format -type and the second is a tuple containing type-specific information. -The following formats are currently understood: -.pT rgb -The video data is 24 bit RGB packed into 32 bit words. -R is the least significant byte, then G and then B. The top byte is -unused. -.IP -There is no type-specific information, so the complete data format -line is -.IP -.ft C -('rgb',()) -.pT grey -The video data is greyscale, at most 8 bits. Data is packed into -8 bit bytes (in the low-order bits). The extra information is the -number of significant bits, so an example data format line is -.IP -.ft C -('grey',(6)) -.pT yiq -The video data is in YIQ format. This is a format that has one luminance -component, Y, and two chrominance components, I and Q. The luminance and -chrominance components are encoded in \fItwo\fP pixel arrays: first an -array of 8-bit luminance values followed by a array of 16 bit chrominance -values. See the section on chrominance coding for details. -.IP -The type specific part contains the number of bits for Y, I and Q, -the chrominance packfactor and the colormap offset. So, a sample format -information line of -.IP -.ft C -('yiq',(5,3,3,2,1024)) -.IP -means that the pictures have 5 bit Y values (in the luminance array), -3 bits of I and Q each (in the chrominance array), chrominance data -is packed for 2x2 pixels, and the first colormap index used is 1024. -.pT hls -The video data is in HLS format. L is the luminance component, H and S -are the chrominance components. The data format and type specific information -are the same as for the yiq format. -.pT hsv -The video data is in HSV format. V is the luminance component, H and S -are the chrominance components. Again, data format and type specific -information are the same as for the yiq format. -.pT rgb8 -The video data is in 8 bit dithered rgb format. This is the format -used internally by the Indigo. bit 0-2 are green, bit 3-4 are blue and -bit 5-7 are red. Because rgb8 is treated more-or-less like yiq format -internally the type-specific information is the same, with zeroes for -the (unused) chrominance sizes: -.IP -.ft C -('rgb8',(8,0,0,0,0)) -.PP -The third header line contains width and height of the video image, -in pixels, and the pack factor of the picture. For compatability, RGB -images must have a pack factor of 0 (zero), and non-RGB images must -have a pack factor of at least 1. -The packfactor is the amount of compression done on the original video -signal to obtain pictures. In other words, if only one out of three pixels -and lines is stored (so every 9 original pixels have one pixel in the -data) the packfactor is three. Width and height are the size of the -\fIoriginal\fP picture. -Viewers are expected to enlarge the picture so it is shown in the -original size. RGB videos cannot be packed. -So, a size line like -.IP -.ft C -200,200,2 -.LP -means that this was a 200x200 picture that is stored as 100x100 pixels. -.SH -Frame header -.PP -Each frame is preceded by a single header line. This line contains timing information -and optional size information. The time information is mandatory, and -contains the time this frame should be displayed, in milliseconds since -the start of the film. Frames should be stored in chronological order. -.PP -An optional second number is interpreted as the size of the luminance -data in bytes. Currently this number, if present, should always be the -same as \fCwidth*height/(packfactor*packfactor)\fP (times 4 for RGB -data), but this might change if we come up with variable-length encoding -for frame data. -.PP -An optional third number is the size of the chrominance data -in bytes. If present, the number should be equal to -.ft C -luminance_size2*/(chrompack*chrompack). -.SH -Frame data -.PP -For RGB films, the frame data is an array of 32 bit pixels containing -RGB data in the lower 24 bits. For greyscale films, the frame data -is an array of 8 bit pixels. For split luminance/chrominance films the -data consists of two parts: first an array of 8 bit luminance values -followed by an array of 16 bit chrominance values. -.PP -For all data formats, the data is stored left-to-right, bottom-to-top. -.SH -Chrominance coding -.PP -Since the human eye is apparently more sensitive to luminance changes -than to chrominance changes we support a coding where we split the luminance -and chrominance components of the video image. The main point of this -is that it allows us to transmit chrominance data in a coarser granularity -than luminance data, for instance one chrominance pixel for every -2x2 luminance pixels. According to the theory this should result in an -acceptable picture while reducing the data by a fair amount. -.PP -The coding of split chrominance/luminance data is a bit tricky, to -make maximum use of the graphics hardware on the Personal Iris. Therefore, -there are the following constraints on the number of bits used: -.IP - -No more than 8 luminance bits, -.IP - -No more than 11 bits total, -.IP - -The luminance bits are in the low-end of the data word, and are stored -as 8 bit bytes, -.IP - -The two sets of chrominance bits are stored in 16 bit words, correctly -aligned, -.IP - -The color map offset is added to the chrominance data. The offset should -be at most 4096-256-2**(total number of bits). To reduce interference with -other applications the offset should be at least 1024. -.LP -So, as an example, an HLS video with 5 bits L, 4 bits H, 2 bits S and an -offset of 1024 will look as follows in-core and in-file: -.IP -.nf -.ft C - 31 15 11 10 9 8 5 4 0 - +-----------------------------------+ -incore + 0+ 1+ S + H + L + - +-----------------------------------+ - +----------+ -L-array + 0 + L + - +----------+ - +-----------------------+ -C-array + 0+ 1+ S + H + 0 + - +-----------------------+ diff --git a/Demo/sgi/video/imgconv.py b/Demo/sgi/video/imgconv.py deleted file mode 100755 index 8fc98b4..0000000 --- a/Demo/sgi/video/imgconv.py +++ /dev/null @@ -1,139 +0,0 @@ -import imageop - -error = 'imgconv.error' - -LOSSY = 1 -NOT_LOSSY = 0 - -def null(img, x, y): - return img - -def mono2grey(img, x, y): - return imageop.mono2grey(img, x, y, 0, 255) - -def grey2jpeggrey(img, x, y): - import jpeg - return jpeg.compress(img, x, y, 1) - -def rgb2jpeg(img, x, y): - import jpeg - return jpeg.compress(img, x, y, 4) - -def jpeggrey2grey(img, width, height): - import jpeg - data, width, height, bytesperpixel = jpeg.decompress(img) - if bytesperpixel <> 1: raise RuntimeError, 'not greyscale jpeg' - return data - -def jpeg2rgb(img, width, height): - import jpeg - data, width, height, bytesperpixel = jpeg.decompress(img) - if bytesperpixel <> 4: raise RuntimeError, 'not rgb jpeg' - return data - -converters = [ \ - ('grey', 'grey4', imageop.grey2grey4, LOSSY), \ - ('grey', 'grey2', imageop.dither2grey2, LOSSY), \ - ('grey', 'mono', imageop.dither2mono, LOSSY), \ - ('mono', 'grey', mono2grey, NOT_LOSSY), \ - ('grey2', 'grey', imageop.grey22grey, NOT_LOSSY), \ - ('grey4', 'grey', imageop.grey42grey, NOT_LOSSY), \ - ('rgb', 'rgb8', imageop.rgb2rgb8, LOSSY), \ - ('rgb8', 'rgb', imageop.rgb82rgb, NOT_LOSSY), \ - ('rgb', 'grey', imageop.rgb2grey, LOSSY), \ - ('grey', 'rgb', imageop.grey2rgb, NOT_LOSSY), \ - ('jpeggrey','grey',jpeggrey2grey, NOT_LOSSY), \ - ('grey', 'jpeggrey',grey2jpeggrey, LOSSY), \ - ('jpeg', 'rgb', jpeg2rgb, NOT_LOSSY), \ - ('rgb', 'jpeg', rgb2jpeg, LOSSY), \ -] - -built = {} - -def addconverter(fcs, tcs, lossy, func): - for i in range(len(converters)): - ifcs, itcs, irtn, ilossy = converters[i] - if (fcs, tcs) == (ifcs, itcs): - converters[i] = (fcs, tcs, func, lossy) - return - converters.append((fcs,tcs,lossy,func)) - -def getconverter(fcs, tcs): - # - # If formats are the same return the dummy converter - # - if fcs == tcs: return null - # - # Otherwise, if we have a converter return that one - # - for ifcs, itcs, irtn, ilossy in converters: - if (fcs, tcs) == (ifcs, itcs): - return irtn - # - # Finally, we try to create a converter - # - if not built.has_key(fcs): - built[fcs] = enumerate_converters(fcs) - if not built[fcs].has_key(tcs): - raise error, 'Sorry, conversion from '+fcs+' to '+tcs+ \ - ' is not implemented' - if len(built[fcs][tcs]) == 3: - # - # Converter not instantiated yet - # - built[fcs][tcs].append(instantiate_converter(built[fcs][tcs])) - cf = built[fcs][tcs][3] - return cf - -def enumerate_converters(fcs): - cvs = {} - formats = [fcs] - steps = 0 - while 1: - workdone = 0 - for ifcs, itcs, irtn, ilossy in converters: - if ifcs == fcs: - template = [ilossy, 1, [irtn]] - elif cvs.has_key(ifcs): - template = cvs[ifcs][:] - template[2] = template[2][:] - if ilossy: - template[0] = ilossy - template[1] = template[1] + 1 - template[2].append(irtn) - else: - continue - if not cvs.has_key(itcs): - cvs[itcs] = template - workdone = 1 - else: - previous = cvs[itcs] - if template < previous: - cvs[itcs] = template - workdone = 1 - if not workdone: - break - steps = steps + 1 - if steps > len(converters): - print '------------------loop in emunerate_converters--------' - print 'CONVERTERS:' - print converters - print 'RESULTS:' - print cvs - raise error, 'Internal error - loop' - return cvs - -def instantiate_converter(args): - list = args[2] - cl = RtConverters(list) - args.append(cl.convert) - return args - -class RtConverters: - def __init__(self, list): - self.list = list - - def convert(self, img, w, h): - for cv in self.list: - img = cv(img, w, h) - return img diff --git a/Demo/sgi/video/rgb2video.py b/Demo/sgi/video/rgb2video.py deleted file mode 100755 index b6c34eb..0000000 --- a/Demo/sgi/video/rgb2video.py +++ /dev/null @@ -1,79 +0,0 @@ -import sys -import VFile -import getopt -import imgfile -import string -import imgconv - -def main(): - format = None - interval = 40 - outfile = 'film.video' - - try: - opts, args = getopt.getopt(sys.argv[1:], 'f:i:o:') - except getopt.error: - usage() - sys.exit(1) - for opt, arg in opts: - if opt == '-f': - format = arg - elif opt == '-i': - interval = string.atoi(arg) - elif opt == '-o': - outfile = arg - else: - usage() - sys.exit(1) - if not args: - usage() - sys.exit(1) - - xsize, ysize, zsize = imgfile.getsizes(args[0]) - nxsize = xsize - - if zsize == 3: - oformat = 'rgb' - elif zsize == 1: - oformat = 'grey' - if xsize % 4: - addbytes = 4-(xsize%4) - nxsize = xsize + addbytes - print 'rgb2video: add',addbytes,'pixels per line' - else: - print 'rgb2video: incorrect number of planes:',zsize - sys.exit(1) - - if format == None: - format = oformat - cfunc = imgconv.getconverter(oformat, format) - - vout = VFile.VoutFile(outfile) - vout.format = format - vout.width = nxsize - vout.height = ysize - vout.writeheader() - t = 0 - sys.stderr.write('Processing ') - for img in args: - sys.stderr.write(img + ' ') - if imgfile.getsizes(img) <> (xsize, ysize, zsize): - print 'rgb2video: Image is different size:', img - sys.exit(1) - data = imgfile.read(img) - if xsize <> nxsize: - ndata = '' - for i in range(0,len(data), xsize): - curline = data[i:i+xsize] - ndata = ndata + curline + ('\0'*(nxsize-xsize)) - data = ndata - vout.writeframe(t, cfunc(data, nxsize, ysize), None) - t = t + interval - sys.stderr.write('\n') - vout.close() - -def usage(): - print 'Usage: rgb2video [-o output] [-i frameinterval] [-f format] rgbfile ...' - -main() - diff --git a/Demo/sgi/video/senddefs.py b/Demo/sgi/video/senddefs.py deleted file mode 100755 index c3ce2cd..0000000 --- a/Demo/sgi/video/senddefs.py +++ /dev/null @@ -1,11 +0,0 @@ -# Defaults shared by Vsend and Vreceice - -DEFMCAST = '225.0.0.250' -DEFPORT = 5555 - -PKTMAX_UCAST = 16*1024 - 6 -PKTMAX_BCAST = 1450 -DEFPKTMAX = PKTMAX_BCAST - -DEFWIDTH = 400 -DEFHEIGHT = 300 diff --git a/Demo/sgi/video/svgrab24.c b/Demo/sgi/video/svgrab24.c deleted file mode 100755 index 3418b14..0000000 --- a/Demo/sgi/video/svgrab24.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * svgrab24 - Grab the current video input image into an rgb file. - * - * Jack Jansen, CWI, May 93. - * - * Adapted from grabone.c - */ - -#ident "$Revision$" - -#include -#include -#include -#include -#include -#include -#include - -main(int argc, char *argv[]) -{ - SVhandle V; - svCaptureInfo ci; - boolean debug; - int ch, errflg; - int bufferSize; - long *buffer; - IMAGE *imgfile; - short *r, *g, *b; - int x, y; - char *ProgName = argv[0]; - - debug = FALSE; - ci.format = SV_RGB32_FRAMES; - ci.width = 0; - ci.height = 0; - ci.size = 1; - - argv++; argc--; - if ( argc > 2 && strcmp(argv[0], "-w") == 0) { - ci.width = atoi(argv[1]); - argc -= 2; - argv += 2; - } - if ( argc != 1 ) { - fprintf(stderr, "Usage: %s [-w width] rgbfilename\n", ProgName); - exit(1); - } - - /* Open video device */ - if ((V = svOpenVideo()) == NULL) { - svPerror("open"); - exit(1); - } - - if (svQueryCaptureBufferSize(V, &ci, &bufferSize) < 0) { - svPerror("svQueryCaptureBufferSize"); - exit(1); - } - buffer = malloc(bufferSize); - - if (svCaptureOneFrame(V, ci.format, &ci.width, &ci.height, buffer) < 0) { - svPerror("svCaptureOneFrame"); - exit(1); - } - if (debug) { - printf("captured size: %d by %d\n", ci.width, ci.height); - } - - if ( (imgfile=iopen(argv[0], "w", RLE(1), 3, ci.width, ci.height, 3)) == 0) { - perror(argv[1]); - exit(1); - } - r = (short *)malloc(ci.width*sizeof(short)); - g = (short *)malloc(ci.width*sizeof(short)); - b = (short *)malloc(ci.width*sizeof(short)); - if ( !r || !g || !b ) { - fprintf(stderr, "%s: malloc failed\n", ProgName); - exit(1); - } - for(y=0; y>8) & 0xff; - b[x] = (data>>16) & 0xff; - } - if ( putrow(imgfile, r, y, 0) == 0 || - putrow(imgfile, g, y, 1) == 0 || - putrow(imgfile, b, y, 2) == 0) { - fprintf(stderr, "%s: putrow failed\n", ProgName); - exit(1); - } - } - iclose(imgfile); - exit(0); -} diff --git a/Demo/sgi/video/vcopy.py b/Demo/sgi/video/vcopy.py deleted file mode 100755 index d32bc1f..0000000 --- a/Demo/sgi/video/vcopy.py +++ /dev/null @@ -1,134 +0,0 @@ -# Copy a video file, interactively, frame-by-frame. - -import sys -import getopt -from gl import * -from DEVICE import * -import VFile -import string -import imageop - -def report(time, iframe): - print 'Frame', iframe, ': t =', time - -def usage(): - sys.stderr.write('usage: vcopy [-t type] [-m treshold] [-a] infile outfile\n') - sys.stderr.write('-t Convert to other type\n') - sys.stderr.write('-a Automatic\n') - sys.stderr.write('-m Convert grey to mono with treshold\n') - sys.stderr.write('-d Convert grey to mono with dithering\n') - sys.exit(2) - -def help(): - print 'Command summary:' - print 'n get next image from input' - print 'w write current image to output' - -def main(): - foreground() - opts, args = getopt.getopt(sys.argv[1:], 't:am:d') - if len(args) <> 2: - usage() - [ifile, ofile] = args - print 'open film ', ifile - ifilm = VFile.VinFile().init(ifile) - print 'open output ', ofile - ofilm = VFile.VoutFile().init(ofile) - - ofilm.setinfo(ifilm.getinfo()) - - use_grabber = 0 - continuous = 0 - tomono = 0 - tomonodither = 0 - for o, a in opts: - if o == '-t': - ofilm.format = a - use_grabber = 1 - if o == '-a': - continuous = 1 - if o == '-m': - if ifilm.format <> 'grey': - print '-m only supported for greyscale' - sys.exit(1) - tomono = 1 - treshold = string.atoi(a) - ofilm.format = 'mono' - if o == '-d': - if ifilm.format <> 'grey': - print '-m only supported for greyscale' - sys.exit(1) - tomonodither = 1 - ofilm.format = 'mono' - - ofilm.writeheader() - # - prefsize(ifilm.width, ifilm.height) - w = winopen(ifile) - qdevice(KEYBD) - qdevice(ESCKEY) - qdevice(WINQUIT) - qdevice(WINSHUT) - print 'qdevice calls done' - # - help() - # - time, data, cdata = ifilm.getnextframe() - ifilm.showframe(data, cdata) - iframe = 1 - report(time, iframe) - # - while 1: - if continuous: - dev = KEYBD - else: - dev, val = qread() - if dev in (ESCKEY, WINQUIT, WINSHUT): - break - if dev == REDRAW: - reshapeviewport() - elif dev == KEYBD: - if continuous: - c = '0' - else: - c = chr(val) - #XXX Debug - if c == 'R': - c3i(255,0,0) - clear() - if c == 'G': - c3i(0,255,0) - clear() - if c == 'B': - c3i(0,0,255) - clear() - if c == 'w' or continuous: - if use_grabber: - data, cdata = ofilm.grabframe() - if tomono: - data = imageop.grey2mono(data, \ - ifilm.width, ifilm.height, \ - treshold) - if tomonodither: - data = imageop.dither2mono(data, \ - ifilm.width, ifilm.height) - ofilm.writeframe(time, data, cdata) - print 'Frame', iframe, 'written.' - if c == 'n' or continuous: - try: - time,data,cdata = ifilm.getnextframe() - ifilm.showframe(data, cdata) - iframe = iframe+1 - report(time, iframe) - except EOFError: - print 'EOF' - if continuous: - break - ringbell() - elif dev == INPUTCHANGE: - pass - else: - print '(dev, val) =', (dev, val) - ofilm.close() - -main() diff --git a/Demo/sgi/video/video.doc b/Demo/sgi/video/video.doc deleted file mode 100755 index 982c008..0000000 --- a/Demo/sgi/video/video.doc +++ /dev/null @@ -1,109 +0,0 @@ - CMIF video tools - -This document gives a quick introduction to some of the tools useful -for recording, editing and playing back video data in CMIF video -format. All the tools mentioned currently live in /ufs/guido/bin/sgi. -A description of the CMIF video file format can be found in -/ufs/jack/cmif-film.ms. - - Recording video - -There are two tools to record video, Vrec and and Vrecb. Vrec does -continuous capture, but can capture at most 15 frames per second. -Vrecb uses burst capture, enabling it to capture all frames. It -captures to main memory, however, so it cannot handle long video -fragments. The following options are common to both programs: - - -r rate Capture one out of 'rate' frames. Default (and - minimum) is 1 for Vrecb, 2 for Vrec. There are some - caveats for recording PAL, see below. - -w width Set initial window width (and height, implicitly). - -g bits Create greyscale film in stead of 8-bit dithered color - film. Allowable values for 'bits' are 2, 4 or 8. - -m Create monochrome dithered film. These look horrible. - -M threshold Create monochrome thresholded film with specified - threshold (in range 0..255). - -G Create 2-bit dithered greyscale film. - -f Capture fields in stead of frames. The film is created - in such a way that the picture will be suitably - enlarged on playback, so aspect ratio, etc. are - maintained. - -d Drop fields if they would cause data from two video - fields to be combined. See the section on PAL for more - details. - -Options for Vrec: - -a Record audio as well. You will have to twiddle audio - and video later if you want lipsync playback. - -q queuesize Set size of the video board circular buffer. A little - experimentation with this may lead to more video being - captured, but not always. - -P frames Preallocate diskspace for 'frames' images. This may - enable you to capture more frames. - -Options for Vrecb: - -n number Capture 'number' frames. Default is 60 (2 seconds). - -Both programs accept a filename to store the video on (default -film.video) and Vrec also accepts an audio file name (default -film.aiff). When you want to record you press the left mouse button. -Vrec stops recording when you release the mouse button and Vrecb stops -after the predetermined number of frames have been recorded. During -recording the picture may look funny, but do not let this worry you, -the film will be ok. - -After recording and saving, Vrec will print the deltas of the field -numbers recorded. A list of '4 4 4 4'... means that all possible -frames (one out of two) have been recorded. Vrecb will tell you how -many duplicate fields have been skipped. See below on PAL useage -again. - - PAL caveats - -The IndigoVideo board converts the incoming video signal to the 60Hz -(59.something, actually) display rate. All further operations, -including capture, are done with respect to display rate. This is -especially bothersome in the case of PAL video, since it means one out -of 5 frames will be duplicated. Together with the fact that, in -continuous capture, you can only capture every second frame this leads -to strange and wondrous effects. The frame numbers returned by the -video board (and displayed by Vrec) are display frame numbers, and so -bear only a very complicated (and probably non-deterministic) relation -to PAL frame numbers. For recording simple videos this is probably no -problem. You can use Vrec and try using -d to see which gives the best -result. On the other hand, if you need every frame and no duplicates -either you have to use Vrecb and supply the -d and -f option. This -will give you exactly the fields as they appeared on the PAL tape. - - Video playback - -The easiest way to play back a video is to use Vplay. Calling it with -an argument of -? will make it list all its options. A few options may -need a bit of explanation: - -M magnify Magnify the images by the given factor. This still - takes any magnification specified in the film (if it - is a field film, for instance) in account. - -w width and - -h height Normally the window will be the correct size for the - film. You can set height and width, though, if you - want the window to be bigger. This is especially - useful if you want to record the film back to - videotape, since you can playback in a window that is - bigger than PAL size with a black background and you - will have no distracting window-manager thingies on - your videotape. - - Video Editing - -Vedit is a (very simple) video editor that allows you to select images -from the input movie and copy them to an output movie. Both input and -output films have a modest buffer that you can move around in. - -Vaddcache takes a movie and adds a frame location cache to it. This -will make some other programs run faster. - -rgb2video converts a set of SGI .rgb files to a movie. - -There are a few programs that can do image format conversion on movies -(i.e. convert an 8-bit dithered RGB movie to a greyscale movie), but -nothing very complete yet. Look at Vcopy.py for more information. diff --git a/Demo/sgi/video/video2rgb.py b/Demo/sgi/video/video2rgb.py deleted file mode 100755 index bbfa6b8..0000000 --- a/Demo/sgi/video/video2rgb.py +++ /dev/null @@ -1,159 +0,0 @@ -#! /usr/bin/env python - -# Convert CMIF movie file(s) to a sequence of rgb images - - -# Help function - -def help(): - print 'Usage: video2rgb [options] [file] ...' - print - print 'Options:' - print '-q : quiet, no informative messages' - print '-m : create monochrome (greyscale) image files' - print '-f prefix : create image files with names "prefix0000.rgb"' - print 'file ... : file(s) to convert; default film.video' - - -# Imported modules - -import sys -sys.path.append('/ufs/jack/src/av/video') # Increase chance of finding VFile -import VFile -import time -import getopt -import string -import imgfile -import imgconv - - -# Global options - -quiet = 0 -prefix = 'film' -seqno = 0 -mono = 0 - - -# Main program -- mostly command line parsing - -def main(): - global quiet, prefix, mono - - # Parse command line - try: - opts, args = getopt.getopt(sys.argv[1:], 'qmf:') - except getopt.error, msg: - sys.stdout = sys.stderr - print 'Error:', msg, '\n' - help() - sys.exit(2) - - # Interpret options - try: - for opt, arg in opts: - if opt == '-q': quiet = 1 - if opt == '-f': prefix = arg - if opt == '-m': mono = 1 - except string.atoi_error: - sys.stdout = sys.stderr - print 'Option', opt, 'requires integer argument' - sys.exit(2) - - # Process all files - if not args: args = ['film.video'] - sts = 0 - for filename in args: - sts = (process(filename) or sts) - - # Exit with proper exit status - sys.exit(sts) - - -# Process one movie file - -def process(filename): - try: - vin = VFile.VinFile(filename) - except IOError, msg: - sys.stderr.write(filename + ': I/O error: ' + `msg` + '\n') - return 1 - except VFile.Error, msg: - sys.stderr.write(msg + '\n') - return 1 - except EOFError: - sys.stderr.write(filename + ': EOF in video header\n') - return 1 - - if not quiet: - vin.printinfo() - - width, height = int(vin.width), int(vin.height) - - try: - if mono: - cf = imgconv.getconverter(vin.format, 'grey') - else: - cf = imgconv.getconverter(vin.format, 'rgb') - except imgconv.error: - print 'Sorry, no converter available for type',vin.format - return - - if mono: - depth = 1 - bpp = 1 - else: - depth = 3 - bpp = 4 - - convert(vin, cf, width, height, depth, bpp, vin.packfactor) - -def convert(vin, cf, width, height, depth, bpp, pf): - global seqno - - if type(pf) == type(()): - xpf, ypf = pf - elif pf == 0: - xpf = ypf = 1 - else: - xpf = ypf = pf - while 1: - try: - time, data, cdata = vin.getnextframe() - except EOFError: - return - if cdata: - print 'Film contains chromdata!' - return - data = cf(data, width/xpf, height/abs(ypf)) - if pf: - data = applypackfactor(data, width, height, pf, bpp) - s = `seqno` - s = '0'*(4-len(s)) + s - fname = prefix + s + '.rgb' - seqno = seqno + 1 - if not quiet: - print 'Writing',fname,'...' - imgfile.write(fname, data, width, height, depth) - -def applypackfactor(image, w, h, pf, bpp): - import imageop - if type(pf) == type(()): - xpf, ypf = pf - elif pf == 0: - xpf = ypf = 1 - else: - xpf = ypf = pf - w1 = w/xpf - h1 = h/abs(ypf) - if ypf < 0: - ypf = -ypf - image = imageop.crop(image, bpp, w1, h1, 0, h1-1, w1-1, 0) - return imageop.scale(image, bpp, w1, h1, w, h) - -# Don't forget to call the main program - -try: - main() -except KeyboardInterrupt: - print '[Interrupt]' diff --git a/Demo/sgi/video/vinfo.py b/Demo/sgi/video/vinfo.py deleted file mode 100755 index 7f98237..0000000 --- a/Demo/sgi/video/vinfo.py +++ /dev/null @@ -1,90 +0,0 @@ -from gl import * -from GL import * -from DEVICE import * -import time -import sys -import getopt - -class Struct(): pass -epoch = Struct() -EndOfFile = 'End of file' -bye = 'bye' - -def openvideo(filename): - f = open(filename, 'r') - line = f.readline() - if not line: raise EndOfFile - if line[:4] == 'CMIF': line = f.readline() - x = eval(line[:-1]) - if len(x) == 3: w, h, pf = x - else: w, h = x; pf = 2 - return f, w, h, pf - -def loadframe(f, w, h, pf): - line = f.readline() - if line == '': - raise EndOfFile - x = eval(line[:-1]) - if type(x) == type(0) or type(x) == type(0.0): - tijd = x - if pf == 0: - size = w*h*4 - else: - size = (w/pf) * (h/pf) - else: - tijd, size = x - f.seek(size, 1) - return tijd - -def main(): - delta = 0 - short = 0 - try: - opts, names = getopt.getopt(sys.argv[1:], 'ds') - except getopt.error, msg: - sys.stderr.write(msg + '\n') - sys.stderr.write('usage: vinfo [-d] [-s] [file] ...\n') - sys.exit(2) - for opt, arg in opts: - if opt == '-d': delta = 1 # print delta between frames - elif opt == '-s': short = 1 # short: don't print times - if names == []: - names = ['film.video'] - for name in names: - try: - f, w, h, pf = openvideo(name) - except: - sys.stderr.write(name + ': cannot open\n') - continue - if pf == 0: - size = w*h*4 - else: - size = (w/pf) * (h/pf) - print name, ':', w, 'x', h, '; pf =', pf, ', size =', size, - if pf == 0: - print '(color)', - else: - print '(' + `(w/pf)` + 'x' + `(h/pf)` + ')', - if (w/pf)%4 <> 0: print '!!!', - print - num = 0 - try: - otijd = 0 - while not short: - try: - tijd = loadframe(f, w, h, pf) - if delta: print '\t' + `tijd-otijd`, - else: print '\t' + `tijd`, - otijd = tijd - num = num + 1 - if num % 8 == 0: - print - except EndOfFile: - raise bye - except bye: - pass - if num % 8 <> 0: - print - f.close() - -main() diff --git a/Demo/sgi/video/vtime.py b/Demo/sgi/video/vtime.py deleted file mode 100755 index c333e57..0000000 --- a/Demo/sgi/video/vtime.py +++ /dev/null @@ -1,106 +0,0 @@ -# -# Module vtime - Keep virtual time between two nodes. -# -# We try for synchronised clocks by sending a packet of the for -# (1,mytime,0) to the other side, and waiting (at most) a second for -# a reply. This reply has the form (2,mytime,histime), and we can -# estimate the time difference by defining histime to be exactly half-way -# between the time we sent our message and got our reply. We send a -# final (3,mynewtime,histime) message to allow the other side to do the -# same computations. -# -# Note that the protocol suffers heavily from the 2-army problem. -# It'll have to do until I can read up on time-sync protocols, though. -# -from socket import * -import time - -MSGSIZE = 100 -MSGTIMEOUT = 1000 - -recv_timeout = 'receive timeout' -bad_connect = 'Bad connection' - -def timeavg(a,b): - return int((long(a)+b)/2L) -def tryrecv(s): - cnt = 0 - while 1: - if s.avail(): - return s.recvfrom(MSGSIZE) - time.millisleep(100) - cnt = cnt + 100 - if cnt > MSGTIMEOUT: - raise recv_timeout - -class VTime(): - def init(self,(client,host,port)): - s = socket(AF_INET, SOCK_DGRAM) - host = gethostbyname(host) - localhost = gethostbyname(gethostname()) - raddr = (host,port) - s.bind((localhost,port)) - if client: - # - # We loop here because we want the *second* measurement - # for accuracy - for loopct in (0,2): - curtijd = time.millitimer() - check = `(loopct,curtijd,0)` - s.sendto(check,raddr) - while 1: - try: - if loopct: - data, other = s.recvfrom(MSGSIZE) - else: - data, other = tryrecv(s) - newtijd = time.millitimer() - if other <> raddr: - print 'Someone else syncing to us: ', other - raise bad_connect - data = eval(data) - if data[:2] == (loopct+1,curtijd): - break - if data[0] <> 2: - print 'Illegal sync reply: ', data - raise bad_connect - except recv_timeout: - curtijd = time.millitimer() - check = `(loopct,curtijd,0)` - s.sendto(check,raddr) - histime = data[2] - s.sendto(`(4,newtijd,histime)`,raddr) - mytime = timeavg(curtijd,newtijd) - #mytime = curtijd - self.timediff = histime - mytime - else: - while 1: - data,other = s.recvfrom(MSGSIZE) - if other <> raddr: - print 'Someone else syncing to us: ', other, ' Wanted ', raddr - raise bad_connect - data = eval(data) - if data[0] in (0,2): - curtijd = time.millitimer() - s.sendto(`(data[0]+1,data[1],curtijd)`,raddr) - elif data[0] == 4: - newtijd = time.millitimer() - histime = data[1] - mytime = timeavg(curtijd,newtijd) - #mytime = curtijd - self.timediff = histime-mytime - break - else: - print 'Funny data: ', data - raise bad_connect - return self - # - def his2mine(self,tijd): - return tijd - self.timediff - # - def mine2his(self, tijd): - return tijd + self.timediff - -def test(clt, host, port): - xx = VTime().init(clt,host,port) - print 'Time diff: ', xx.his2mine(0) diff --git a/Demo/sgi/video/watchcursor.py b/Demo/sgi/video/watchcursor.py deleted file mode 100755 index aae3f85..0000000 --- a/Demo/sgi/video/watchcursor.py +++ /dev/null @@ -1,45 +0,0 @@ -# Define a 16x16 cursor looking like a watch - -# X11 bitmap file: -##define x_width 16 -##define x_height 16 -#static char x_bits[] = { -# 0xf0, 0x0f, 0xf8, 0x1f, 0x1c, 0x38, 0x8e, 0x71, 0x87, 0xe1, 0x83, 0xc1, -# 0x83, 0xc1, 0xf3, 0xc1, 0xf3, 0xc1, 0x03, 0xc0, 0x03, 0xc0, 0x07, 0xe0, -# 0x0e, 0x70, 0x1c, 0x38, 0xf8, 0x1f, 0xf0, 0x0f}; - - -watch = [ \ - 0x0ff0,\ - 0x1ff8,\ - 0x381c,\ - 0x718e,\ - 0xe187,\ - 0xc183,\ - 0xc183,\ - 0xc1f3,\ - 0xc1f3,\ - 0xc003,\ - 0xc003,\ - 0xe007,\ - 0x700e,\ - 0x381c,\ - 0x1ff8,\ - 0x0ff0,\ - ] - -watch.reverse() # Turn it upside-down - -def defwatch(index): - import gl - gl.defcursor(index, watch*8) - gl.curorigin(index, 8, 8) - -def test(): - import gl - gl.foreground() - gl.winopen('test watchcursor') - defwatch(1) - gl.setcursor(1, 0, 0) - import time - time.sleep(10) -- cgit v0.12