From a021acacfbd0a3300b4f158d925ff1d90d4e1020 Mon Sep 17 00:00:00 2001
From: Greg Ward <gward@python.net>
Date: Wed, 19 Apr 2000 22:34:11 +0000
Subject: Changed '\option' to '\longprogramopt' wherever it referred to a
 command-line  option.

---
 Doc/dist/dist.tex | 10 +++++-----
 Doc/inst/inst.tex | 44 ++++++++++++++++++++++----------------------
 2 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/Doc/dist/dist.tex b/Doc/dist/dist.tex
index 1f22bd6..c741944 100644
--- a/Doc/dist/dist.tex
+++ b/Doc/dist/dist.tex
@@ -356,7 +356,7 @@ default format for the current platform.  The default formats are:
   \lineii{Unix}{gzipped tar file (\file{.tar.gz})}
   \lineii{Windows}{zip file}  
 \end{tableii}
-You can specify as many formats as you like using the \option{--formats} 
+You can specify as many formats as you like using the \longprogramopt{formats} 
 option, for example:
 \begin{verbatim}
 python setup.py sdist --formats=gztar,zip
@@ -486,10 +486,10 @@ source distribution:
 \begin{verbatim}
 python setup.py sdist --manifest-only
 \end{verbatim}
-(\option{--manifest-only} implies \option{--force-manifest}.)
+(\longprogramopt{manifest-only} implies \longprogramopt{force-manifest}.)
 
 If you don't want to use the default file set, you can supply the
-\option{--no-defaults} option.  If you use \option{--no-defaults} and
+\longprogramopt{no-defaults} option.  If you use \longprogramopt{no-defaults} and
 don't supply a manifest template (or it's empty, or nothing matches the
 patterns in it), then your source distribution will be empty.
 
@@ -547,7 +547,7 @@ between someone being able to use your extensions or not.
 
 \XXX{filenames are inaccurate here!}
 
-The \command{bdist} command has a \option{--format} option, similar to
+The \command{bdist} command has a \longprogramopt{format} option, similar to
 the \command{sdist} command, that you can use to select which formats to
 generate: for example,
 \begin{verbatim}
@@ -580,7 +580,7 @@ The available formats for built distributions are:
 \end{description}
 
 You don't have to use the \command{bdist} command with the
-\option{--formats} option; you can also use the command that directly
+\longprogramopt{formats} option; you can also use the command that directly
 implements the format you're interested in.  Many of these
 \command{bdist} ``sub-commands'' actually generate several similar
 formats; for instance, the \command{bdist\_dumb} command generates all
diff --git a/Doc/inst/inst.tex b/Doc/inst/inst.tex
index 1fe8f9d..a926a22 100644
--- a/Doc/inst/inst.tex
+++ b/Doc/inst/inst.tex
@@ -219,7 +219,7 @@ As implied above, the \command{build} command is responsible for putting
 the files to install into a \emph{build directory}.  By default, this is
 \file{build} under the distribution root; if you're excessively
 concerned with speed, or want to keep the source tree pristine, you can
-change the build directory with the \option{--build-base} option.  For
+change the build directory with the \longprogramopt{build-base} option.  For
 example:
 \begin{verbatim}
 python setup.py build --build-base=/tmp/pybuild/foo-1.0
@@ -342,16 +342,16 @@ installations in the next section.
           {Override option}
      \lineiii{pure module distribution}
              {\filevar{#1}\filenq{#2}}
-             {\option{--install-purelib}}
+             {\longprogramopt{install-purelib}}
      \lineiii{non-pure module distribution}
              {\filevar{#3}\filenq{#4}}
-             {\option{--install-platlib}}
+             {\longprogramopt{install-platlib}}
      \lineiii{scripts}
              {\filevar{#5}\filenq{#6}}
-             {\option{--install-scripts}}
+             {\longprogramopt{install-scripts}}
      \lineiii{data}
              {\filevar{#7}\filenq{#8}}
-             {\option{--install-data}}
+             {\longprogramopt{install-data}}
    \end{tableiii}}
 
 \section{Alternate Installation}
@@ -390,14 +390,14 @@ Installing a new module distribution is as simple as
 \begin{verbatim}
 python setup.py install --home=<dir>
 \end{verbatim}
-where you can supply any directory you like for the \option{home}
+where you can supply any directory you like for the \longprogramopt{home}
 option.  Lazy typists can just type a tilde (\code{\tilde}); the
 \command{install} command will expand this to your home directory:
 \begin{verbatim}
 python setup.py install --home=~
 \end{verbatim}
 
-The \option{home} option defines the installation base directory.  Files
+The \longprogramopt{home} option defines the installation base directory.  Files
 are installed to the following directories under the installation base
 as follows:
 \installscheme{home}{/lib/python}
@@ -438,12 +438,12 @@ could be done with
 /usr/local/bin/python setup.py install --prefix=/mnt/@server/export
 \end{verbatim}
 
-In either case, the \option{prefix} option defines the installation
-base, and the \option{exec-prefix} option defines the platform-specific
+In either case, the \longprogramopt{prefix} option defines the installation
+base, and the \longprogramopt{exec-prefix} option defines the platform-specific
 installation base, which is used for platform-specific files.
 (Currently, this just means non-pure module distributions, but could be
 expanded to C libraries, binary executables, etc.)  If
-\option{exec-prefix} is not supplied, it defaults to \option{prefix}.
+\longprogramopt{exec-prefix} is not supplied, it defaults to \longprogramopt{prefix}.
 Files are installed as follows:
 
 \installscheme{prefix}{/lib/python1.\filevar{X}/site-packages}
@@ -451,14 +451,14 @@ Files are installed as follows:
               {prefix}{/bin}
               {prefix}{/share}
 
-There is no requirement that \option{prefix} or \option{exec-prefix}
+There is no requirement that \longprogramopt{prefix} or \longprogramopt{exec-prefix}
 actually point to an alternate Python installation; if the directories
 listed above do not already exist, they are created at installation
 time.
 
 Incidentally, the real reason the prefix scheme is important is simply
 that a standard Unix installation uses the prefix scheme, but with
-\option{prefix} and \option{exec-prefix} supplied by Python itself (as
+\longprogramopt{prefix} and \longprogramopt{exec-prefix} supplied by Python itself (as
 \code{sys.prefix} and \code{sys.exec\_prefix}).  Thus, you might think
 you'll never use the prefix scheme, but every time you run \code{python
   setup.py install} without any other options, you're using it.
@@ -472,7 +472,7 @@ used to run extensions installed in this way is compatibile with the
 interpreter used to build them.  The best way to do this is to ensure
 that the two interpreters are the same version of Python (possibly
 different builds, or possibly copies of the same build).  (Of course, if
-your \option{prefix} and \option{exec-prefix} don't even point to an
+your \longprogramopt{prefix} and \longprogramopt{exec-prefix} don't even point to an
 alternate Python installation, this is immaterial.)
 
 
@@ -481,8 +481,8 @@ alternate Python installation, this is immaterial.)
 
 Since Windows has no conception of a user's home directory, and since
 the standard Python installation under Windows is simpler than that
-under Unix, there's no point in having separate \option{prefix} and
-\option{home} options.  Just use the \option{prefix} option to specify
+under Unix, there's no point in having separate \longprogramopt{prefix} and
+\longprogramopt{home} options.  Just use the \longprogramopt{prefix} option to specify
 a base directory, e.g.
 \begin{verbatim}
 python setup.py install --prefix="\Temp\Python"
@@ -490,8 +490,8 @@ python setup.py install --prefix="\Temp\Python"
 to install modules to the \file{\bslash{}Temp} directory on the current
 drive.
 
-The installation base is defined by the \option{prefix} option; the
-\option{exec-prefix} option is not supported under Windows.  Files are
+The installation base is defined by the \longprogramopt{prefix} option; the
+\longprogramopt{exec-prefix} option is not supported under Windows.  Files are
 installed as follows:
 \installscheme{prefix}{}
               {prefix}{}
@@ -504,7 +504,7 @@ installed as follows:
 
 Like Windows, Mac~OS has no notion of home directories (or even of
 users), and a fairly simple standard Python installation.  Thus, only a
-\option{prefix} option is needed.  It defines the installation base, and 
+\longprogramopt{prefix} option is needed.  It defines the installation base, and 
 files are installed under it as follows:
 
 \XXX{how do MacPython users run the interpreter with command-line args?}
@@ -541,14 +541,14 @@ how you define a custom installation scheme.  These override options can
 be relative, absolute, or explicitly defined in terms of one of the
 installation base directories.  (There are two installation base
 directories, and they are normally the same---they only differ when you
-use the Unix ``prefix scheme'' and supply different \option{prefix} and
-\option{exec-prefix} options.)
+use the Unix ``prefix scheme'' and supply different \longprogramopt{prefix} and
+\longprogramopt{exec-prefix} options.)
 
 For example, say you're installing a module distribution to your home
 directory under Unix---but you want scripts to go in
 \file{\tilde/scripts} rather than \file{\tilde/bin}.  As you might
 expect, you can override this directory with the
-\option{install-scripts} option; in this case, it makes most sense to
+\longprogramopt{install-scripts} option; in this case, it makes most sense to
 supply a relative path, which will be interpreted relative to the
 installation base directory (your home directory, in this case):
 \begin{verbatim}
@@ -559,7 +559,7 @@ Another Unix example: suppose your Python installation was built and
 installed with a prefix of \file{/usr/local/python}, so under a standard 
 installation scripts will wind up in \file{/usr/local/python/bin}.  If
 you want them in \file{/usr/local/bin} instead, you would supply this
-absolute directory for the \option{install-scripts} option:
+absolute directory for the \longprogramopt{install-scripts} option:
 \begin{verbatim}
 python setup.py install --install-scripts=/usr/local/bin
 \end{verbatim}
-- 
cgit v0.12

