From 7f43da7d61aef59ffb8a0c5042ebdf85c08869c6 Mon Sep 17 00:00:00 2001 From: Guido van Rossum Date: Mon, 1 Aug 1994 12:15:30 +0000 Subject: Merge rev alpha100 bck into main trunk --- configure | 2018 ++++++++++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 1521 insertions(+), 497 deletions(-) diff --git a/configure b/configure index 43bc686..a09bfa0 100755 --- a/configure +++ b/configure @@ -1,149 +1,368 @@ - +#!/bin/sh +# From configure.in Revision: 1.3 #!/bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf. -# Copyright (C) 1991, 1992, 1993 Free Software Foundation, Inc. +# Generated automatically using autoconf version 1.8 +# Copyright (C) 1991, 1992, 1993, 1994 Free Software Foundation, Inc. -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) +# This configure script is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as published +# by the Free Software Foundation; either version 2, or (at your option) # any later version. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# This script is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +# Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -# Usage: configure [--srcdir=DIR] [--host=HOST] [--gas] [--nfp] -# [--prefix=PREFIX] [--exec-prefix=PREFIX] [--with-PACKAGE[=VALUE]] -# Ignores all args except --srcdir, --prefix, --exec-prefix, and -# --with-PACKAGE[=VALUE] unless this script has special code to handle it. +# Save the original args to write them into config.status later. +configure_args="$*" -for arg +# Only options that might do something get documented. +ac_usage="Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +--build=BUILD configure for building on BUILD [BUILD=HOST] +--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) +--enable-FEATURE[=ARG] include FEATURE [ARG=yes] +--exec-prefix=PREFIX install host dependent files in PREFIX [/usr/local] +--help print this message +--host=HOST configure for HOST [guessed] +--prefix=PREFIX install host independent files in PREFIX [/usr/local] +--quiet, --silent do not print \`checking for...' messages +--srcdir=DIR find the sources in DIR [configure dir or ..] +--target=TARGET configure for TARGET [TARGET=HOST] +--verbose print results of checks +--version print the version of autoconf that created configure +--with-PACKAGE[=ARG] use PACKAGE [ARG=yes] +--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) +--x-includes=DIR X include files are in DIR +--x-libraries=DIR X library files are in DIR" + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +exec_prefix= +host=NONE +no_create= +nonopt=NONE +norecursion= +prefix= +program_prefix= +program_suffix= +program_transform_name= +silent= +srcdir= +target=NONE +verbose= +x_includes= +x_libraries= + +ac_prev= +for ac_option do - # Handle --exec-prefix with a space before the argument. - if test x$next_exec_prefix = xyes; then exec_prefix=$arg; next_exec_prefix= - # Handle --host with a space before the argument. - elif test x$next_host = xyes; then next_host= - # Handle --prefix with a space before the argument. - elif test x$next_prefix = xyes; then prefix=$arg; next_prefix= - # Handle --srcdir with a space before the argument. - elif test x$next_srcdir = xyes; then srcdir=$arg; next_srcdir= - else - case $arg in - # For backward compatibility, recognize -exec-prefix and --exec_prefix. - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* | --exec=* | --exe=* | --ex=* | --e=*) - exec_prefix=`echo $arg | sed 's/[-a-z_]*=//'` ;; - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- | --exec | --exe | --ex | --e) - next_exec_prefix=yes ;; - - -gas | --gas | --ga | --g) ;; - - -host=* | --host=* | --hos=* | --ho=* | --h=*) ;; - -host | --host | --hos | --ho | --h) - next_host=yes ;; - - -nfp | --nfp | --nf) ;; - - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=`echo $arg | sed 's/[-a-z_]*=//'` ;; - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - next_prefix=yes ;; - - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=* | --s=*) - srcdir=`echo $arg | sed 's/[-a-z_]*=//'` ;; - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr | --s) - next_srcdir=yes ;; - - -with-* | --with-*) - package=`echo $arg|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that aren't valid shell variable names. - if test -n "`echo $package| sed 's/[-a-zA-Z0-9_]//g'`"; then - echo "configure: $package: invalid package name" >&2; exit 1 - fi - package=`echo $package| sed 's/-/_/g'` - case "$arg" in - *=*) val="`echo $arg|sed 's/[^=]*=//'`" ;; - *) val=1 ;; - esac - eval "with_$package='$val'" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb | --ver | --ve | --v) - verbose=yes ;; - - *) ;; - esac + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue fi + + # Accept (but ignore some of) the important Cygnus configure + # options, so we can diagnose typos. + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + case "$ac_option" in + + -build | --build | --buil | --bui | --bu | --b) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=* | --b=*) + build="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that aren't valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + echo "configure: $ac_feature: invalid feature name" >&2; exit 1 + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that aren't valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + echo "configure: $ac_feature: invalid feature name" >&2; exit 1 + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + # For backward compatibility, recognize -exec-prefix and --exec_prefix. + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + with_gas=1 ;; # Obsolete; use --with-gas. + + -help | --help | --hel | --he) + cat << EOF +$ac_usage +EOF + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -nfp | --nfp | --nf) + with_fp=no ;; # Obsolete; use --without-fp. + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -norecursion | --norecursion | --norecursio | --norecursi \ + | --norecurs | --norecur | --norecu | --norec | --nore | --nor) + norecursion=yes ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 1.8" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that aren't valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + echo "configure: $ac_package: invalid package name" >&2; exit 1 + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that aren't valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + echo "configure: $ac_package: invalid package name" >&2; exit 1 + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) with_x=1 ;; # Obsolete; use --with-x. + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) echo "configure: $ac_option: invalid option; use --help to show usage" >&2; exit 1 + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" >&2 + fi + if test "x$nonopt" -ne xNONE; then + echo "configure: can only configure for one host and one target at a time" >&2; exit 1 + fi + nonopt="$ac_option" + ;; + + esac done -trap 'rm -fr conftest* confdefs* core; exit 1' 1 3 15 -trap 'rm -f confdefs*' 0 +if test -n "$ac_prev"; then + echo "configure: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" >&2; exit 1 +fi + +trap 'rm -fr conftest* confdefs* core $ac_clean_files; exit 1' 1 2 15 +trap 'rm -fr confdefs* $ac_clean_files' 0 + +# Save the original args if we used an alternate arg parser. +ac_configure_temp="${configure_args-$*}" +# Strip out --no-create and --norecursion so they don't pile up. +configure_args= +for ac_arg in $ac_configure_temp; do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -norecursion | --norecursion | --norecursio | --norecursi \ + | --norecurs | --norecur | --norecu | --norec | --nore | --nor) ;; + *) configure_args="$configure_args $ac_arg" ;; + esac +done # NLS nuisances. # These must not be set unconditionally because not all systems understand # e.g. LANG=C (notably SCO). -if test "${LC_ALL+set}" = 'set' ; then LC_ALL=C; export LC_ALL; fi -if test "${LANG+set}" = 'set' ; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = 'set'; then LC_ALL=C; export LC_ALL; fi +if test "${LANG+set}" = 'set'; then LANG=C; export LANG; fi -rm -f conftest* confdefs.h +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo > confdefs.h -compile='${CC-cc} $CFLAGS conftest.c -o conftest $LIBS >/dev/null 2>&1' # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. -unique_file=Include/object.h +ac_unique_file=Include/object.h # Find the source files, if location was not specified. if test -z "$srcdir"; then - srcdirdefaulted=yes + ac_srcdir_defaulted=yes # Try the directory containing this script, then `..'. - prog=$0 - confdir=`echo $prog|sed 's%/[^/][^/]*$%%'` - test "X$confdir" = "X$prog" && confdir=. - srcdir=$confdir - if test ! -r $srcdir/$unique_file; then + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi fi -if test ! -r $srcdir/$unique_file; then - if test x$srcdirdefaulted = xyes; then - echo "configure: Can not find sources in \`${confdir}' or \`..'." 1>&2 +if test ! -r $srcdir/$ac_unique_file; then + if test x$ac_srcdir_defaulted = xyes; then + echo "configure: can not find sources in ${ac_confdir} or .." >&2; exit 1 else - echo "configure: Can not find sources in \`${srcdir}'." 1>&2 + echo "configure: can not find sources in ${srcdir}" >&2; exit 1 fi - exit 1 fi -# Preserve a srcdir of `.' to avoid automounter screwups with pwd. -# But we can't avoid them for `..', to make subdirectories work. -case $srcdir in - .|/*|~*) ;; - *) srcdir=`cd $srcdir; pwd` ;; # Make relative path absolute. -esac +ac_ext=c +ac_cpp='${CPP} $CFLAGS' +ac_compile='${CC-cc} $CFLAGS $LDFLAGS conftest.${ac_ext} -o conftest $LIBS >/dev/null 2>&1' -# Save the original args to write them into config.status later. -configure_args="$*" +if test -z "$prefix" +then + test -n "$silent" || echo "checking for python to derive installation directory prefix" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="$IFS:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test $ac_dir != . && test -f $ac_dir/python; then + # Not all systems have dirname. + prefix=`echo $ac_dir|sed 's%/[^/][^/]*$%%'` + break + fi + done + IFS="$ac_save_ifs" + test -n "$verbose" && echo " chose installation directory prefix ${prefix}" +fi +# Don't suppress compiler output when --verbose is specified +test -n "$verbose" && + ac_compile=`echo "$ac_compile" | sed "s|>/dev/null 2>&1||"` +test -n "$verbose" && echo " setting ac_compile to '$ac_compile'" # checks for alternative programs +test -n "$silent" || echo "checking for --with(out)-gcc" +# check whether --with-gcc or --without-gcc was given. +withval="$with_gcc" +if test -n "$withval"; then + + case $withval in + no) withval=cc;; + yes) withval=gcc;; + esac + CC=$withval +fi + if test -z "$CC"; then # Extract the first word of `gcc', so it can be a program name with args. - set dummy gcc; word=$2 - echo checking for $word - IFS="${IFS= }"; saveifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/$word; then + set ac_dummy gcc; ac_word=$2 + test -n "$silent" || echo "checking for $ac_word" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then CC="gcc" break fi done - IFS="$saveifs" + IFS="$ac_save_ifs" fi test -z "$CC" && CC="cc" test -n "$CC" && test -n "$verbose" && echo " setting CC to $CC" @@ -160,39 +379,136 @@ if egrep yes conftest.out >/dev/null 2>&1; then fi rm -f conftest* +# Make sure to not get the incompatible SysV /etc/install and +# /usr/sbin/install, which might be in PATH before a BSD-like install, +# or the SunOS /usr/etc/install directory, or the AIX /bin/install, +# or the AFS install, which mishandles nonexistent args, or +# /usr/ucb/install on SVR4, which tries to use the nonexistent group +# `staff', or /sbin/install on IRIX which has incompatible command-line +# syntax. Sigh. +# +# On most BSDish systems install is in /usr/bin, not /usr/ucb +# anyway. +# This turns out not to be true, so the mere pathname isn't an indication +# of whether the program works. What we really need is a set of tests for +# the install program to see if it actually works in all the required ways. +# +# Avoid using ./install, which might have been erroneously created +# by make from ./install.sh. +if test "z${INSTALL}" = "z" ; then + test -n "$silent" || echo "checking for a BSD compatible install" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + case "$ac_dir" in + ''|.|/etc|/sbin|/usr/sbin|/usr/etc|/usr/afsws/bin|/usr/ucb) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + for ac_prog in installbsd scoinst install; do + if test -f $ac_dir/$ac_prog; then + if grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + : # AIX + else + INSTALL="$ac_dir/$ac_prog -c" + INSTALL_PROGRAM='${INSTALL}' + INSTALL_DATA='${INSTALL} -m 644' + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_ifs" +fi +if test -z "$INSTALL"; then + if test -f ${srcdir}/install.sh; then + # As a last resort, use the slow shell script. + INSTALL='@top_srcdir@/install.sh -c' + else + echo "configure: warning: ${srcdir}/install.sh not found; using cp" >&2 + INSTALL=cp + fi +fi +test -n "$verbose" && echo " setting INSTALL to $INSTALL" +# Use test -z because SunOS4 sh mishandles ${INSTALL_PROGRAM-'${INSTALL}'}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -n "$verbose" && echo " setting INSTALL_PROGRAM to $INSTALL_PROGRAM" +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL}' +test -n "$verbose" && echo " setting INSTALL_DATA to $INSTALL_DATA" + if test -z "$RANLIB"; then # Extract the first word of `ranlib', so it can be a program name with args. - set dummy ranlib; word=$2 - echo checking for $word - IFS="${IFS= }"; saveifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/$word; then + set ac_dummy ranlib; ac_word=$2 + test -n "$silent" || echo "checking for $ac_word" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then RANLIB="ranlib" break fi done - IFS="$saveifs" + IFS="$ac_save_ifs" fi test -z "$RANLIB" && RANLIB=":" test -n "$RANLIB" && test -n "$verbose" && echo " setting RANLIB to $RANLIB" +for ac_prog in ar aal +do +if test -z "$AR"; then + # Extract the first word of `$ac_prog', so it can be a program name with args. + set ac_dummy $ac_prog; ac_word=$2 + test -n "$silent" || echo "checking for $ac_word" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + AR="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi + +test -n "$AR" && test -n "$verbose" && echo " setting AR to $AR" + +test -n "$AR" && break +done +test -n "$AR" || AR="ar" + + # checks for UNIX variants that set C preprocessor variables -echo checking for AIX -echo checking how to run the C preprocessor +test -n "$silent" || echo "checking for AIX" +test -n "$silent" || echo "checking how to run the C preprocessor" if test -z "$CPP"; then # This must be in double quotes, not single quotes, because CPP may get # substituted into the Makefile and ``${CC-cc}'' will simply confuse # make. It must be expanded now. CPP="${CC-cc} -E" - cat > conftest.c < conftest.${ac_ext} < Syntax Error EOF -err=`eval "($CPP conftest.c >/dev/null) 2>&1"` -if test -z "$err"; then +# Some shells (Coherent) do redirections in the wrong order, so need +# the parens. +ac_err=`eval "($ac_cpp conftest.${ac_ext} >/dev/null) 2>&1"` +if test -z "$ac_err"; then + : +else + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.${ac_ext} < +Syntax Error +EOF +# Some shells (Coherent) do redirections in the wrong order, so need +# the parens. +ac_err=`eval "($ac_cpp conftest.${ac_ext} >/dev/null) 2>&1"` +if test -z "$ac_err"; then : else rm -rf conftest* @@ -200,24 +516,30 @@ else fi rm -f conftest* fi -test ".${verbose}" != "." && echo " setting CPP to $CPP" +rm -f conftest* +fi +test -n "$verbose" && echo " setting CPP to $CPP" -cat > conftest.c < conftest.${ac_ext} < conftest.out 2>&1" +eval "$ac_cpp conftest.${ac_ext} > conftest.out 2>&1" if egrep "yes" conftest.out >/dev/null 2>&1; then rm -rf conftest* { test -n "$verbose" && \ echo " defining _ALL_SOURCE" -echo "#define" _ALL_SOURCE 1 >> confdefs.h +echo "#define" _ALL_SOURCE "1" >> confdefs.h DEFS="$DEFS -D_ALL_SOURCE=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}_ALL_SOURCE\${ac_dB}_ALL_SOURCE\${ac_dC}1\${ac_dD} +\${ac_uA}_ALL_SOURCE\${ac_uB}_ALL_SOURCE\${ac_uC}1\${ac_uD} +\${ac_eA}_ALL_SOURCE\${ac_eB}_ALL_SOURCE\${ac_eC}1\${ac_eD} +" } @@ -225,7 +547,7 @@ fi rm -f conftest* -echo checking for POSIXized ISC +test -n "$silent" || echo "checking for POSIXized ISC" if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -234,8 +556,12 @@ then { test -n "$verbose" && \ echo " defining _POSIX_SOURCE" -echo "#define" _POSIX_SOURCE 1 >> confdefs.h +echo "#define" _POSIX_SOURCE "1" >> confdefs.h DEFS="$DEFS -D_POSIX_SOURCE=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}_POSIX_SOURCE\${ac_dB}_POSIX_SOURCE\${ac_dC}1\${ac_dD} +\${ac_uA}_POSIX_SOURCE\${ac_uB}_POSIX_SOURCE\${ac_uC}1\${ac_uD} +\${ac_eA}_POSIX_SOURCE\${ac_eB}_POSIX_SOURCE\${ac_eC}1\${ac_eD} +" } if test -n "$GCC"; then @@ -245,13 +571,15 @@ DEFS="$DEFS -D_POSIX_SOURCE=1" fi fi -echo checking for minix/config.h -cat > conftest.c < conftest.${ac_ext} < EOF -err=`eval "($CPP conftest.c >/dev/null) 2>&1"` -if test -z "$err"; then +# Some shells (Coherent) do redirections in the wrong order, so need +# the parens. +ac_err=`eval "($ac_cpp conftest.${ac_ext} >/dev/null) 2>&1"` +if test -z "$ac_err"; then rm -rf conftest* MINIX=1 @@ -264,73 +592,113 @@ if test -n "$MINIX"; then { test -n "$verbose" && \ echo " defining _POSIX_SOURCE" -echo "#define" _POSIX_SOURCE 1 >> confdefs.h +echo "#define" _POSIX_SOURCE "1" >> confdefs.h DEFS="$DEFS -D_POSIX_SOURCE=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}_POSIX_SOURCE\${ac_dB}_POSIX_SOURCE\${ac_dC}1\${ac_dD} +\${ac_uA}_POSIX_SOURCE\${ac_uB}_POSIX_SOURCE\${ac_uC}1\${ac_uD} +\${ac_eA}_POSIX_SOURCE\${ac_eB}_POSIX_SOURCE\${ac_eC}1\${ac_eD} +" } { test -n "$verbose" && \ -echo " defining" _POSIX_1_SOURCE to be 2 -echo "#define" _POSIX_1_SOURCE 2 >> confdefs.h +echo " defining" _POSIX_1_SOURCE to be "2" +echo "#define" _POSIX_1_SOURCE "2" >> confdefs.h DEFS="$DEFS -D_POSIX_1_SOURCE=2" +ac_sed_defs="${ac_sed_defs}\${ac_dA}_POSIX_1_SOURCE\${ac_dB}_POSIX_1_SOURCE\${ac_dC}2\${ac_dD} +\${ac_uA}_POSIX_1_SOURCE\${ac_uB}_POSIX_1_SOURCE\${ac_uC}2\${ac_uD} +\${ac_eA}_POSIX_1_SOURCE\${ac_eB}_POSIX_1_SOURCE\${ac_eC}2\${ac_eD} +" } { test -n "$verbose" && \ echo " defining _MINIX" -echo "#define" _MINIX 1 >> confdefs.h +echo "#define" _MINIX "1" >> confdefs.h DEFS="$DEFS -D_MINIX=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}_MINIX\${ac_dB}_MINIX\${ac_dC}1\${ac_dD} +\${ac_uA}_MINIX\${ac_uB}_MINIX\${ac_uC}1\${ac_uD} +\${ac_eA}_MINIX\${ac_eB}_MINIX\${ac_eC}1\${ac_eD} +" } fi -LIBS_save="${LIBS}" +ac_save_LIBS="${LIBS}" LIBS="${LIBS} -lseq" -have_lib="" -echo checking for -lseq -cat > conftest.c < conftest.${ac_ext} < conftest.${ac_ext} </dev/null; then + +{ +test -n "$verbose" && \ +echo " defining _POSIX_SOURCE" +echo "#define" _POSIX_SOURCE "1" >> confdefs.h +DEFS="$DEFS -D_POSIX_SOURCE=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}_POSIX_SOURCE\${ac_dB}_POSIX_SOURCE\${ac_dC}1\${ac_dD} +\${ac_uA}_POSIX_SOURCE\${ac_uB}_POSIX_SOURCE\${ac_uC}1\${ac_uD} +\${ac_eA}_POSIX_SOURCE\${ac_eB}_POSIX_SOURCE\${ac_eC}1\${ac_eD} +" +} + + +fi +rm -fr conftest* # checks for header files -echo checking for ANSI C header files -cat > conftest.c < conftest.${ac_ext} < #include #include #include EOF -err=`eval "($CPP conftest.c >/dev/null) 2>&1"` -if test -z "$err"; then +# Some shells (Coherent) do redirections in the wrong order, so need +# the parens. +ac_err=`eval "($ac_cpp conftest.${ac_ext} >/dev/null) 2>&1"` +if test -z "$ac_err"; then rm -rf conftest* # SunOS 4.x string.h does not declare mem*, contrary to ANSI. echo '#include "confdefs.h" -#include ' > conftest.c -eval "$CPP conftest.c > conftest.out 2>&1" +#include ' > conftest.${ac_ext} +eval "$ac_cpp conftest.${ac_ext} > conftest.out 2>&1" if egrep "memchr" conftest.out >/dev/null 2>&1; then rm -rf conftest* # SGI's /bin/cc from Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -cat > conftest.c < conftest.${ac_ext} < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -341,18 +709,32 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -eval $compile +eval $ac_compile if test -s conftest && (./conftest; exit) 2>/dev/null; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +echo '#include "confdefs.h" +#include ' > conftest.${ac_ext} +eval "$ac_cpp conftest.${ac_ext} > conftest.out 2>&1" +if egrep "free" conftest.out >/dev/null 2>&1; then + rm -rf conftest* { test -n "$verbose" && \ echo " defining STDC_HEADERS" -echo "#define" STDC_HEADERS 1 >> confdefs.h +echo "#define" STDC_HEADERS "1" >> confdefs.h DEFS="$DEFS -DSTDC_HEADERS=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}STDC_HEADERS\${ac_dB}STDC_HEADERS\${ac_dC}1\${ac_dD} +\${ac_uA}STDC_HEADERS\${ac_uB}STDC_HEADERS\${ac_uC}1\${ac_uD} +\${ac_eA}STDC_HEADERS\${ac_eB}STDC_HEADERS\${ac_eC}1\${ac_eD} +" } fi +rm -f conftest* + + +fi rm -fr conftest* fi @@ -362,23 +744,29 @@ rm -f conftest* fi rm -f conftest* -for hdr in dlfcn.h signal.h stdarg.h unistd.h utime.h sys/param.h sys/select.h sys/times.h sys/utsname.h +for ac_hdr in dlfcn.h fcntl.h limits.h signal.h stdarg.h stdlib.h thread.h unistd.h utime.h sys/audioio.h sys/param.h sys/select.h sys/time.h sys/times.h sys/un.h sys/utsname.h do -trhdr=HAVE_`echo $hdr | tr '[a-z]./' '[A-Z]__'` -echo checking for ${hdr} -cat > conftest.c < conftest.${ac_ext} < +#include <${ac_hdr}> EOF -err=`eval "($CPP conftest.c >/dev/null) 2>&1"` -if test -z "$err"; then +# Some shells (Coherent) do redirections in the wrong order, so need +# the parens. +ac_err=`eval "($ac_cpp conftest.${ac_ext} >/dev/null) 2>&1"` +if test -z "$ac_err"; then rm -rf conftest* { test -n "$verbose" && \ -echo " defining ${trhdr}" -echo "#define" ${trhdr} 1 >> confdefs.h -DEFS="$DEFS -D${trhdr}=1" +echo " defining ${ac_tr_hdr}" +echo "#define" ${ac_tr_hdr} "1" >> confdefs.h +DEFS="$DEFS -D${ac_tr_hdr}=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}${ac_tr_hdr}\${ac_dB}${ac_tr_hdr}\${ac_dC}1\${ac_dD} +\${ac_uA}${ac_tr_hdr}\${ac_uB}${ac_tr_hdr}\${ac_uC}1\${ac_uD} +\${ac_eA}${ac_tr_hdr}\${ac_eB}${ac_tr_hdr}\${ac_eC}1\${ac_eD} +" } @@ -386,109 +774,125 @@ fi rm -f conftest* done -echo checking for directory library header -dirheader= -if test -z "$dirheader"; then - echo checking for dirent.h -cat > conftest.c < conftest.${ac_ext} < #include -int main() { exit(0); } -int t() { DIR *dirp = 0; } +int main() { return 0; } +int t() { DIR *dirp = 0;; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then rm -rf conftest* { test -n "$verbose" && \ echo " defining DIRENT" -echo "#define" DIRENT 1 >> confdefs.h +echo "#define" DIRENT "1" >> confdefs.h DEFS="$DEFS -DDIRENT=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}DIRENT\${ac_dB}DIRENT\${ac_dC}1\${ac_dD} +\${ac_uA}DIRENT\${ac_uB}DIRENT\${ac_uC}1\${ac_uD} +\${ac_eA}DIRENT\${ac_eB}DIRENT\${ac_eC}1\${ac_eD} +" } - dirheader=dirent.h + ac_dir_header=dirent.h fi rm -f conftest* fi -if test -z "$dirheader"; then - echo checking for sys/ndir.h -cat > conftest.c < conftest.${ac_ext} < #include -int main() { exit(0); } -int t() { DIR *dirp = 0; } +int main() { return 0; } +int t() { DIR *dirp = 0;; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then rm -rf conftest* { test -n "$verbose" && \ echo " defining SYSNDIR" -echo "#define" SYSNDIR 1 >> confdefs.h +echo "#define" SYSNDIR "1" >> confdefs.h DEFS="$DEFS -DSYSNDIR=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}SYSNDIR\${ac_dB}SYSNDIR\${ac_dC}1\${ac_dD} +\${ac_uA}SYSNDIR\${ac_uB}SYSNDIR\${ac_uC}1\${ac_uD} +\${ac_eA}SYSNDIR\${ac_eB}SYSNDIR\${ac_eC}1\${ac_eD} +" } - dirheader=sys/ndir.h + ac_dir_header=sys/ndir.h fi rm -f conftest* fi -if test -z "$dirheader"; then - echo checking for sys/dir.h -cat > conftest.c < conftest.${ac_ext} < #include -int main() { exit(0); } -int t() { DIR *dirp = 0; } +int main() { return 0; } +int t() { DIR *dirp = 0;; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then rm -rf conftest* { test -n "$verbose" && \ echo " defining SYSDIR" -echo "#define" SYSDIR 1 >> confdefs.h +echo "#define" SYSDIR "1" >> confdefs.h DEFS="$DEFS -DSYSDIR=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}SYSDIR\${ac_dB}SYSDIR\${ac_dC}1\${ac_dD} +\${ac_uA}SYSDIR\${ac_uB}SYSDIR\${ac_uC}1\${ac_uD} +\${ac_eA}SYSDIR\${ac_eB}SYSDIR\${ac_eC}1\${ac_eD} +" } - dirheader=sys/dir.h + ac_dir_header=sys/dir.h fi rm -f conftest* fi -if test -z "$dirheader"; then - echo checking for ndir.h -cat > conftest.c < conftest.${ac_ext} < #include -int main() { exit(0); } -int t() { DIR *dirp = 0; } +int main() { return 0; } +int t() { DIR *dirp = 0;; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then rm -rf conftest* { test -n "$verbose" && \ echo " defining NDIR" -echo "#define" NDIR 1 >> confdefs.h +echo "#define" NDIR "1" >> confdefs.h DEFS="$DEFS -DNDIR=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}NDIR\${ac_dB}NDIR\${ac_dC}1\${ac_dD} +\${ac_uA}NDIR\${ac_uB}NDIR\${ac_uC}1\${ac_uD} +\${ac_eA}NDIR\${ac_eB}NDIR\${ac_eC}1\${ac_eD} +" } - dirheader=ndir.h + ac_dir_header=ndir.h fi rm -f conftest* fi -echo checking for closedir return value -cat > conftest.c < conftest.${ac_ext} < -#include <$dirheader> +#include <$ac_dir_header> int closedir(); main() { exit(closedir(opendir(".")) != 0); } EOF -eval $compile +eval $ac_compile if test -s conftest && (./conftest; exit) 2>/dev/null; then : else @@ -496,8 +900,12 @@ else { test -n "$verbose" && \ echo " defining VOID_CLOSEDIR" -echo "#define" VOID_CLOSEDIR 1 >> confdefs.h +echo "#define" VOID_CLOSEDIR "1" >> confdefs.h DEFS="$DEFS -DVOID_CLOSEDIR=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}VOID_CLOSEDIR\${ac_dB}VOID_CLOSEDIR\${ac_dC}1\${ac_dD} +\${ac_uA}VOID_CLOSEDIR\${ac_uB}VOID_CLOSEDIR\${ac_uC}1\${ac_uD} +\${ac_eA}VOID_CLOSEDIR\${ac_eB}VOID_CLOSEDIR\${ac_eC}1\${ac_eD} +" } fi @@ -505,84 +913,33 @@ rm -fr conftest* # checks for typedefs -echo checking for uid_t in sys/types.h +test -n "$silent" || echo "checking for clock_t in time.h" echo '#include "confdefs.h" -#include ' > conftest.c -eval "$CPP conftest.c > conftest.out 2>&1" -if egrep "uid_t" conftest.out >/dev/null 2>&1; then +#include ' > conftest.${ac_ext} +eval "$ac_cpp conftest.${ac_ext} > conftest.out 2>&1" +if egrep "clock_t" conftest.out >/dev/null 2>&1; then : else rm -rf conftest* { test -n "$verbose" && \ -echo " defining" uid_t to be int -echo "#define" uid_t int >> confdefs.h -DEFS="$DEFS -Duid_t=int" -} - -{ -test -n "$verbose" && \ -echo " defining" gid_t to be int -echo "#define" gid_t int >> confdefs.h -DEFS="$DEFS -Dgid_t=int" +echo " defining" clock_t to be "long" +echo "#define" clock_t "long" >> confdefs.h +DEFS="$DEFS -Dclock_t=long" +ac_sed_defs="${ac_sed_defs}\${ac_dA}clock_t\${ac_dB}clock_t\${ac_dC}long\${ac_dD} +\${ac_uA}clock_t\${ac_uB}clock_t\${ac_uC}long\${ac_uD} +\${ac_eA}clock_t\${ac_eB}clock_t\${ac_eC}long\${ac_eD} +" } fi rm -f conftest* -echo checking for type of array argument to getgroups -prog='/* Thanks to Mike Rendell for this test. */ -#include -#define NGID 256 -#undef MAX -#define MAX(x,y) ((x) > (y) ? (x) : (y)) -main() -{ - gid_t gidset[NGID]; - int i, n; - union { gid_t gval; long lval; } val; - - val.lval = -1; - for (i = 0; i < NGID; i++) - gidset[i] = val.gval; - n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1, - gidset); - /* Exit non-zero if getgroups seems to require an array of ints. This - happens when gid_t is short but getgroups modifies an array of ints. */ - exit ((n > 0 && gidset[n] != val.gval) ? 1 : 0); -}' -cat > conftest.c </dev/null; then - -{ -test -n "$verbose" && \ -echo " defining" GETGROUPS_T to be gid_t -echo "#define" GETGROUPS_T gid_t >> confdefs.h -DEFS="$DEFS -DGETGROUPS_T=gid_t" -} - - -else - -{ -test -n "$verbose" && \ -echo " defining" GETGROUPS_T to be int -echo "#define" GETGROUPS_T int >> confdefs.h -DEFS="$DEFS -DGETGROUPS_T=int" -} - -fi -rm -fr conftest* - -echo checking for mode_t in sys/types.h +test -n "$silent" || echo "checking for mode_t in sys/types.h" echo '#include "confdefs.h" -#include ' > conftest.c -eval "$CPP conftest.c > conftest.out 2>&1" +#include ' > conftest.${ac_ext} +eval "$ac_cpp conftest.${ac_ext} > conftest.out 2>&1" if egrep "mode_t" conftest.out >/dev/null 2>&1; then : else @@ -590,18 +947,22 @@ else { test -n "$verbose" && \ -echo " defining" mode_t to be int -echo "#define" mode_t int >> confdefs.h +echo " defining" mode_t to be "int" +echo "#define" mode_t "int" >> confdefs.h DEFS="$DEFS -Dmode_t=int" +ac_sed_defs="${ac_sed_defs}\${ac_dA}mode_t\${ac_dB}mode_t\${ac_dC}int\${ac_dD} +\${ac_uA}mode_t\${ac_uB}mode_t\${ac_uC}int\${ac_uD} +\${ac_eA}mode_t\${ac_eB}mode_t\${ac_eC}int\${ac_eD} +" } fi rm -f conftest* -echo checking for off_t in sys/types.h +test -n "$silent" || echo "checking for off_t in sys/types.h" echo '#include "confdefs.h" -#include ' > conftest.c -eval "$CPP conftest.c > conftest.out 2>&1" +#include ' > conftest.${ac_ext} +eval "$ac_cpp conftest.${ac_ext} > conftest.out 2>&1" if egrep "off_t" conftest.out >/dev/null 2>&1; then : else @@ -609,18 +970,22 @@ else { test -n "$verbose" && \ -echo " defining" off_t to be long -echo "#define" off_t long >> confdefs.h +echo " defining" off_t to be "long" +echo "#define" off_t "long" >> confdefs.h DEFS="$DEFS -Doff_t=long" +ac_sed_defs="${ac_sed_defs}\${ac_dA}off_t\${ac_dB}off_t\${ac_dC}long\${ac_dD} +\${ac_uA}off_t\${ac_uB}off_t\${ac_uC}long\${ac_uD} +\${ac_eA}off_t\${ac_eB}off_t\${ac_eC}long\${ac_eD} +" } fi rm -f conftest* -echo checking for pid_t in sys/types.h +test -n "$silent" || echo "checking for pid_t in sys/types.h" echo '#include "confdefs.h" -#include ' > conftest.c -eval "$CPP conftest.c > conftest.out 2>&1" +#include ' > conftest.${ac_ext} +eval "$ac_cpp conftest.${ac_ext} > conftest.out 2>&1" if egrep "pid_t" conftest.out >/dev/null 2>&1; then : else @@ -628,16 +993,20 @@ else { test -n "$verbose" && \ -echo " defining" pid_t to be int -echo "#define" pid_t int >> confdefs.h +echo " defining" pid_t to be "int" +echo "#define" pid_t "int" >> confdefs.h DEFS="$DEFS -Dpid_t=int" +ac_sed_defs="${ac_sed_defs}\${ac_dA}pid_t\${ac_dB}pid_t\${ac_dC}int\${ac_dD} +\${ac_uA}pid_t\${ac_uB}pid_t\${ac_uC}int\${ac_uD} +\${ac_eA}pid_t\${ac_eB}pid_t\${ac_eC}int\${ac_eD} +" } fi rm -f conftest* -echo checking for return type of signal handlers -cat > conftest.c < conftest.${ac_ext} < #include @@ -645,17 +1014,21 @@ cat > conftest.c <> confdefs.h +echo " defining" RETSIGTYPE to be "void" +echo "#define" RETSIGTYPE "void" >> confdefs.h DEFS="$DEFS -DRETSIGTYPE=void" +ac_sed_defs="${ac_sed_defs}\${ac_dA}RETSIGTYPE\${ac_dB}RETSIGTYPE\${ac_dC}void\${ac_dD} +\${ac_uA}RETSIGTYPE\${ac_uB}RETSIGTYPE\${ac_uC}void\${ac_uD} +\${ac_eA}RETSIGTYPE\${ac_eB}RETSIGTYPE\${ac_eC}void\${ac_eD} +" } @@ -664,19 +1037,23 @@ else { test -n "$verbose" && \ -echo " defining" RETSIGTYPE to be int -echo "#define" RETSIGTYPE int >> confdefs.h +echo " defining" RETSIGTYPE to be "int" +echo "#define" RETSIGTYPE "int" >> confdefs.h DEFS="$DEFS -DRETSIGTYPE=int" +ac_sed_defs="${ac_sed_defs}\${ac_dA}RETSIGTYPE\${ac_dB}RETSIGTYPE\${ac_dC}int\${ac_dD} +\${ac_uA}RETSIGTYPE\${ac_uB}RETSIGTYPE\${ac_uC}int\${ac_uD} +\${ac_eA}RETSIGTYPE\${ac_eB}RETSIGTYPE\${ac_eC}int\${ac_eD} +" } fi rm -f conftest* -echo checking for size_t in sys/types.h +test -n "$silent" || echo "checking for size_t in sys/types.h" echo '#include "confdefs.h" -#include ' > conftest.c -eval "$CPP conftest.c > conftest.out 2>&1" +#include ' > conftest.${ac_ext} +eval "$ac_cpp conftest.${ac_ext} > conftest.out 2>&1" if egrep "size_t" conftest.out >/dev/null 2>&1; then : else @@ -684,18 +1061,22 @@ else { test -n "$verbose" && \ -echo " defining" size_t to be unsigned -echo "#define" size_t unsigned >> confdefs.h +echo " defining" size_t to be "unsigned" +echo "#define" size_t "unsigned" >> confdefs.h DEFS="$DEFS -Dsize_t=unsigned" +ac_sed_defs="${ac_sed_defs}\${ac_dA}size_t\${ac_dB}size_t\${ac_dC}unsigned\${ac_dD} +\${ac_uA}size_t\${ac_uB}size_t\${ac_uC}unsigned\${ac_uD} +\${ac_eA}size_t\${ac_eB}size_t\${ac_eC}unsigned\${ac_eD} +" } fi rm -f conftest* -echo checking for uid_t in sys/types.h +test -n "$silent" || echo "checking for uid_t in sys/types.h" echo '#include "confdefs.h" -#include ' > conftest.c -eval "$CPP conftest.c > conftest.out 2>&1" +#include ' > conftest.${ac_ext} +eval "$ac_cpp conftest.${ac_ext} > conftest.out 2>&1" if egrep "uid_t" conftest.out >/dev/null 2>&1; then : else @@ -703,16 +1084,24 @@ else { test -n "$verbose" && \ -echo " defining" uid_t to be int -echo "#define" uid_t int >> confdefs.h +echo " defining" uid_t to be "int" +echo "#define" uid_t "int" >> confdefs.h DEFS="$DEFS -Duid_t=int" +ac_sed_defs="${ac_sed_defs}\${ac_dA}uid_t\${ac_dB}uid_t\${ac_dC}int\${ac_dD} +\${ac_uA}uid_t\${ac_uB}uid_t\${ac_uC}int\${ac_uD} +\${ac_eA}uid_t\${ac_eB}uid_t\${ac_eC}int\${ac_eD} +" } { test -n "$verbose" && \ -echo " defining" gid_t to be int -echo "#define" gid_t int >> confdefs.h +echo " defining" gid_t to be "int" +echo "#define" gid_t "int" >> confdefs.h DEFS="$DEFS -Dgid_t=int" +ac_sed_defs="${ac_sed_defs}\${ac_dA}gid_t\${ac_dB}gid_t\${ac_dC}int\${ac_dD} +\${ac_uA}gid_t\${ac_uB}gid_t\${ac_uC}int\${ac_uD} +\${ac_eA}gid_t\${ac_eB}gid_t\${ac_eC}int\${ac_eD} +" } fi @@ -720,194 +1109,448 @@ rm -f conftest* # checks for libraries -LIBS_save="${LIBS}" +ac_save_LIBS="${LIBS}" LIBS="${LIBS} -ldl" -have_lib="" -echo checking for -ldl -cat > conftest.c < conftest.${ac_ext} <> confdefs.h +echo "#define" HAVE_LIBDL "1" >> confdefs.h DEFS="$DEFS -DHAVE_LIBDL=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}HAVE_LIBDL\${ac_dB}HAVE_LIBDL\${ac_dC}1\${ac_dD} +\${ac_uA}HAVE_LIBDL\${ac_uB}HAVE_LIBDL\${ac_uC}1\${ac_uD} +\${ac_eA}HAVE_LIBDL\${ac_eB}HAVE_LIBDL\${ac_eC}1\${ac_eD} +" } LIBS="${LIBS} -ldl" fi -LIBS="${LIBS} -L${READLINESRC-${PWD-${CWD-`pwd`}}/readline}" -LIBS_save="${LIBS}" -LIBS="${LIBS} -lreadline" -have_lib="" -echo checking for -lreadline -cat > conftest.c < conftest.${ac_ext} <> confdefs.h -DEFS="$DEFS -DHAVE_LIBREADLINE=1" +echo " defining HAVE_LIBSOCKET" +echo "#define" HAVE_LIBSOCKET "1" >> confdefs.h +DEFS="$DEFS -DHAVE_LIBSOCKET=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}HAVE_LIBSOCKET\${ac_dB}HAVE_LIBSOCKET\${ac_dC}1\${ac_dD} +\${ac_uA}HAVE_LIBSOCKET\${ac_uB}HAVE_LIBSOCKET\${ac_uC}1\${ac_uD} +\${ac_eA}HAVE_LIBSOCKET\${ac_eB}HAVE_LIBSOCKET\${ac_eC}1\${ac_eD} +" } - LIBS="${LIBS} -lreadline" + LIBS="${LIBS} -lsocket" fi -if test -n "${have_lib}"; then -LIBS_save="${LIBS}" -LIBS="${LIBS} -ltermcap" -have_lib="" -echo checking for -ltermcap -cat > conftest.c < conftest.${ac_ext} <> confdefs.h -DEFS="$DEFS -DHAVE_LIBTERMCAP=1" +echo " defining HAVE_LIBINET" +echo "#define" HAVE_LIBINET "1" >> confdefs.h +DEFS="$DEFS -DHAVE_LIBINET=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}HAVE_LIBINET\${ac_dB}HAVE_LIBINET\${ac_dC}1\${ac_dD} +\${ac_uA}HAVE_LIBINET\${ac_uB}HAVE_LIBINET\${ac_uC}1\${ac_uD} +\${ac_eA}HAVE_LIBINET\${ac_eB}HAVE_LIBINET\${ac_eC}1\${ac_eD} +" } - LIBS="${LIBS} -ltermcap" + LIBS="${LIBS} -linet" fi +ac_save_LIBS="${LIBS}" +LIBS="${LIBS} -lnsl" +ac_have_lib="" +test -n "$silent" || echo "checking for -lnsl" +cat > conftest.${ac_ext} <> confdefs.h +DEFS="$DEFS -DHAVE_LIBNSL=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}HAVE_LIBNSL\${ac_dB}HAVE_LIBNSL\${ac_dC}1\${ac_dD} +\${ac_uA}HAVE_LIBNSL\${ac_uB}HAVE_LIBNSL\${ac_uC}1\${ac_uD} +\${ac_eA}HAVE_LIBNSL\${ac_eB}HAVE_LIBNSL\${ac_eC}1\${ac_eD} +" +} -# Check for IRIX or SOLARIS thread interface -LIBS_save="${LIBS}" -LIBS="${LIBS} -lmpc" -have_lib="" -echo checking for -lmpc -cat > conftest.c <> confdefs.h +DEFS="$DEFS -DWITH_READLINE=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}WITH_READLINE\${ac_dB}WITH_READLINE\${ac_dC}1\${ac_dD} +\${ac_uA}WITH_READLINE\${ac_uB}WITH_READLINE\${ac_uC}1\${ac_uD} +\${ac_eA}WITH_READLINE\${ac_eB}WITH_READLINE\${ac_eC}1\${ac_eD} +" +} + +if test -d "$withval" +then LIBS="$LIBS -L$withval" +else echo "configure: proper usage is --with-readline=DIRECTORY" >&2; exit 1 +fi +termcap= +ac_save_LIBS="${LIBS}" +LIBS="${LIBS} -ltermcap" +ac_have_lib="" +test -n "$silent" || echo "checking for -ltermcap" +cat > conftest.${ac_ext} < conftest.${ac_ext} <&2; exit 1 +fi +fi + + +test -n "$silent" || echo "checking for --with-thread" +# check whether --with-thread or --without-thread was given. +withval="$with_thread" +if test -n "$withval"; then + +if test -d "$withval" +then LIBS="$LIBS -L$withval" +fi +ac_save_LIBS="${LIBS}" +LIBS="${LIBS} -lpthreads" +ac_have_lib="" +test -n "$silent" || echo "checking for -lpthreads" +cat > conftest.${ac_ext} <> confdefs.h -DEFS="$DEFS -DHAVE_LIBMPC=1" +echo " defining WITH_THREAD" +echo "#define" WITH_THREAD "1" >> confdefs.h +DEFS="$DEFS -DWITH_THREAD=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}WITH_THREAD\${ac_dB}WITH_THREAD\${ac_dC}1\${ac_dD} +\${ac_uA}WITH_THREAD\${ac_uB}WITH_THREAD\${ac_uC}1\${ac_uD} +\${ac_eA}WITH_THREAD\${ac_eB}WITH_THREAD\${ac_eC}1\${ac_eD} +" } - LIBS="${LIBS} -lmpc" + +{ +test -n "$verbose" && \ +echo " defining _POSIX_THREADS" +echo "#define" _POSIX_THREADS "1" >> confdefs.h +DEFS="$DEFS -D_POSIX_THREADS=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}_POSIX_THREADS\${ac_dB}_POSIX_THREADS\${ac_dC}1\${ac_dD} +\${ac_uA}_POSIX_THREADS\${ac_uB}_POSIX_THREADS\${ac_uC}1\${ac_uD} +\${ac_eA}_POSIX_THREADS\${ac_eB}_POSIX_THREADS\${ac_eC}1\${ac_eD} +" +} + +LIBS="$LIBS -lpthreads" +LIBOBJS="$LIBOBJS thread.o" +else + :; +fi + +ac_save_LIBS="${LIBS}" +LIBS="${LIBS} -lmpc" +ac_have_lib="" +test -n "$silent" || echo "checking for -lmpc" +cat > conftest.${ac_ext} <> confdefs.h +DEFS="$DEFS -DWITH_THREAD=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}WITH_THREAD\${ac_dB}WITH_THREAD\${ac_dC}1\${ac_dD} +\${ac_uA}WITH_THREAD\${ac_uB}WITH_THREAD\${ac_uC}1\${ac_uD} +\${ac_eA}WITH_THREAD\${ac_eB}WITH_THREAD\${ac_eC}1\${ac_eD} +" +} -if test -n "${have_lib}"; then -DEFS="${DEFS} -DUSE_THREAD" -LIBOBJS="${LIBOBJS} thread.o" +LIBS="$LIBS -lmpc" +LIBOBJS="$LIBOBJS thread.o" +else + :; fi -LIBS_save="${LIBS}" +ac_save_LIBS="${LIBS}" LIBS="${LIBS} -lthread" -have_lib="" -echo checking for -lthread -cat > conftest.c < conftest.${ac_ext} <> confdefs.h +DEFS="$DEFS -DWITH_THREAD=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}WITH_THREAD\${ac_dB}WITH_THREAD\${ac_dC}1\${ac_dD} +\${ac_uA}WITH_THREAD\${ac_uB}WITH_THREAD\${ac_uC}1\${ac_uD} +\${ac_eA}WITH_THREAD\${ac_eB}WITH_THREAD\${ac_eC}1\${ac_eD} +" +} + +LIBS="$LIBS -lthread" +LIBOBJS="$LIBOBJS thread.o" +else + :; +fi + + +fi + + +# -I${DLINCLDIR} is added to the compile rule for import.o + +DLINCLDIR=/ + +test -n "$silent" || echo "checking for --with-sgi-dl" +# check whether --with-sgi-dl or --without-sgi-dl was given. +withval="$with_sgi_dl" +if test -n "$withval"; then + { test -n "$verbose" && \ -echo " defining HAVE_LIBTHREAD" -echo "#define" HAVE_LIBTHREAD 1 >> confdefs.h -DEFS="$DEFS -DHAVE_LIBTHREAD=1" +echo " defining WITH_SGI_DL" +echo "#define" WITH_SGI_DL "1" >> confdefs.h +DEFS="$DEFS -DWITH_SGI_DL=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}WITH_SGI_DL\${ac_dB}WITH_SGI_DL\${ac_dC}1\${ac_dD} +\${ac_uA}WITH_SGI_DL\${ac_uB}WITH_SGI_DL\${ac_uC}1\${ac_uD} +\${ac_eA}WITH_SGI_DL\${ac_eB}WITH_SGI_DL\${ac_eC}1\${ac_eD} +" } - LIBS="${LIBS} -lthread" +dldir=$withval +if test -d "$dldir" +then LIBS="$LIBS -L$dldir" +else echo "configure: proper usage is --with-sgi-dl=DIRECTORY" >&2; exit 1 +fi +DLINCLDIR=${dldir} +LIBS="$LIBS -ldl -lmld" fi -if test -n "${have_lib}"; then -DEFS="${DEFS} -DUSE_THREAD" -LIBOBJS="${LIBOBJS} thread.o" + +test -n "$silent" || echo "checking for --with-dl-dld" +# check whether --with-dl-dld or --without-dl-dld was given. +withval="$with_dl_dld" +if test -n "$withval"; then + +{ +test -n "$verbose" && \ +echo " defining WITH_DL_DLD" +echo "#define" WITH_DL_DLD "1" >> confdefs.h +DEFS="$DEFS -DWITH_DL_DLD=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}WITH_DL_DLD\${ac_dB}WITH_DL_DLD\${ac_dC}1\${ac_dD} +\${ac_uA}WITH_DL_DLD\${ac_uB}WITH_DL_DLD\${ac_uC}1\${ac_uD} +\${ac_eA}WITH_DL_DLD\${ac_eB}WITH_DL_DLD\${ac_eC}1\${ac_eD} +" +} + +dldir=`echo "$withval" | sed 's/,.*//'` +dlddir=`echo "$withval" | sed 's/.*,//'` +if test -d "$dldir" -a -d "$dlddir" +then LIBS="$LIBS -L$dldir -L$dlddir" +else echo "configure: proper usage is --with-dl-dld=DL_DIRECTORY" >&2; exit 1 +fi +DLINCLDIR=${dldir} +LIBS="$LIBS -ldl -ldld" fi + # checks for library functions -for func in clock ftime gettimeofday getpgrp getwd lstat readlink readline select setsid setpgid setpgrp siginterrupt symlink tcgetpgrp tcsetpgrp times uname waitpid +for ac_func in chown clock dlopen ftime gettimeofday getpeername getpgrp getpid getwd link lstat nice readlink select setgid setuid setsid setpgid setpgrp setvbuf siginterrupt symlink tcgetpgrp tcsetpgrp times uname waitpid do -trfunc=HAVE_`echo $func | tr '[a-z]' '[A-Z]'` -echo checking for ${func} -cat > conftest.c < conftest.${ac_ext} < -int main() { exit(0); } +int main() { return 0; } int t() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_${func}) || defined (__stub___${func}) +#if defined (__stub_${ac_func}) || defined (__stub___${ac_func}) choke me #else /* Override any gcc2 internal prototype to avoid an error. */ -extern char ${func}(); ${func}(); +extern char ${ac_func}(); ${ac_func}(); #endif - } +; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then rm -rf conftest* { test -n "$verbose" && \ -echo " defining ${trfunc}" -echo "#define" ${trfunc} 1 >> confdefs.h -DEFS="$DEFS -D${trfunc}=1" +echo " defining ${ac_tr_func}" +echo "#define" ${ac_tr_func} "1" >> confdefs.h +DEFS="$DEFS -D${ac_tr_func}=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}${ac_tr_func}\${ac_dB}${ac_tr_func}\${ac_dC}1\${ac_dD} +\${ac_uA}${ac_tr_func}\${ac_uB}${ac_tr_func}\${ac_uC}1\${ac_uD} +\${ac_eA}${ac_tr_func}\${ac_eB}${ac_tr_func}\${ac_eC}1\${ac_eD} +" } @@ -915,41 +1558,41 @@ fi rm -f conftest* done -for func in dup2 getcwd strerror strtoul strtod memmove +for ac_func in dup2 getcwd strerror memmove do -echo checking for ${func} -cat > conftest.c < conftest.${ac_ext} < -int main() { exit(0); } +int main() { return 0; } int t() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_${func}) || defined (__stub___${func}) +#if defined (__stub_${ac_func}) || defined (__stub___${ac_func}) choke me #else /* Override any gcc2 internal prototype to avoid an error. */ -extern char ${func}(); ${func}(); +extern char ${ac_func}(); ${ac_func}(); #endif - } +; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then : else rm -rf conftest* - LIBOBJS="$LIBOBJS ${func}.o" -test -n "$verbose" && echo " using ${func}.o instead" + LIBOBJS="$LIBOBJS ${ac_func}.o" +test -n "$verbose" && echo " using ${ac_func}.o instead" fi rm -f conftest* done -echo checking for getpgrp -cat > conftest.c < conftest.${ac_ext} < -int main() { exit(0); } +int main() { return 0; } int t() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named @@ -960,25 +1603,29 @@ choke me /* Override any gcc2 internal prototype to avoid an error. */ extern char getpgrp(); getpgrp(); #endif - } +; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then rm -rf conftest* - echo checking for argument to getpgrp -cat > conftest.c < conftest.${ac_ext} < -int main() { exit(0); } -int t() { getpgrp(0); } +int main() { return 0; } +int t() { getpgrp(0);; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then rm -rf conftest* { test -n "$verbose" && \ echo " defining GETPGRP_HAVE_ARG" -echo "#define" GETPGRP_HAVE_ARG 1 >> confdefs.h +echo "#define" GETPGRP_HAVE_ARG "1" >> confdefs.h DEFS="$DEFS -DGETPGRP_HAVE_ARG=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}GETPGRP_HAVE_ARG\${ac_dB}GETPGRP_HAVE_ARG\${ac_dC}1\${ac_dD} +\${ac_uA}GETPGRP_HAVE_ARG\${ac_uB}GETPGRP_HAVE_ARG\${ac_uC}1\${ac_uD} +\${ac_eA}GETPGRP_HAVE_ARG\${ac_eB}GETPGRP_HAVE_ARG\${ac_eC}1\${ac_eD} +" } @@ -991,38 +1638,42 @@ rm -f conftest* # checks for structures -echo checking for whether time.h and sys/time.h may both be included -cat > conftest.c < conftest.${ac_ext} < #include #include -int main() { exit(0); } -int t() { struct tm *tp; } +int main() { return 0; } +int t() { struct tm *tp;; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then rm -rf conftest* { test -n "$verbose" && \ echo " defining TIME_WITH_SYS_TIME" -echo "#define" TIME_WITH_SYS_TIME 1 >> confdefs.h +echo "#define" TIME_WITH_SYS_TIME "1" >> confdefs.h DEFS="$DEFS -DTIME_WITH_SYS_TIME=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}TIME_WITH_SYS_TIME\${ac_dB}TIME_WITH_SYS_TIME\${ac_dC}1\${ac_dD} +\${ac_uA}TIME_WITH_SYS_TIME\${ac_uB}TIME_WITH_SYS_TIME\${ac_uC}1\${ac_uD} +\${ac_eA}TIME_WITH_SYS_TIME\${ac_eB}TIME_WITH_SYS_TIME\${ac_eC}1\${ac_eD} +" } fi rm -f conftest* -echo checking for struct tm in time.h -cat > conftest.c < conftest.${ac_ext} < #include -int main() { exit(0); } -int t() { struct tm *tp; tp->tm_sec; } +int main() { return 0; } +int t() { struct tm *tp; tp->tm_sec;; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then : else rm -rf conftest* @@ -1030,66 +1681,78 @@ else { test -n "$verbose" && \ echo " defining TM_IN_SYS_TIME" -echo "#define" TM_IN_SYS_TIME 1 >> confdefs.h +echo "#define" TM_IN_SYS_TIME "1" >> confdefs.h DEFS="$DEFS -DTM_IN_SYS_TIME=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}TM_IN_SYS_TIME\${ac_dB}TM_IN_SYS_TIME\${ac_dC}1\${ac_dD} +\${ac_uA}TM_IN_SYS_TIME\${ac_uB}TM_IN_SYS_TIME\${ac_uC}1\${ac_uD} +\${ac_eA}TM_IN_SYS_TIME\${ac_eB}TM_IN_SYS_TIME\${ac_eC}1\${ac_eD} +" } fi rm -f conftest* -decl='#include +ac_decl='#include ' case "$DEFS" in - *TM_IN_SYS_TIME*) decl="$decl + *TM_IN_SYS_TIME*) ac_decl="$ac_decl #include " ;; - *) decl="$decl + *) ac_decl="$ac_decl #include " ;; esac -echo checking for tm_zone in struct tm -cat > conftest.c < conftest.${ac_ext} <> confdefs.h +echo "#define" HAVE_TM_ZONE "1" >> confdefs.h DEFS="$DEFS -DHAVE_TM_ZONE=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}HAVE_TM_ZONE\${ac_dB}HAVE_TM_ZONE\${ac_dC}1\${ac_dD} +\${ac_uA}HAVE_TM_ZONE\${ac_uB}HAVE_TM_ZONE\${ac_uC}1\${ac_uD} +\${ac_eA}HAVE_TM_ZONE\${ac_eB}HAVE_TM_ZONE\${ac_eC}1\${ac_eD} +" } else rm -rf conftest* - no_tm_zone=1 + ac_no_tm_zone=1 fi rm -f conftest* -if test -n "$no_tm_zone"; then -echo checking for tzname -cat > conftest.c < conftest.${ac_ext} < #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others want it this way. */ #endif -int main() { exit(0); } -int t() { atoi(*tzname); } +int main() { return 0; } +int t() { atoi(*tzname);; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then rm -rf conftest* { test -n "$verbose" && \ echo " defining HAVE_TZNAME" -echo "#define" HAVE_TZNAME 1 >> confdefs.h +echo "#define" HAVE_TZNAME "1" >> confdefs.h DEFS="$DEFS -DHAVE_TZNAME=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}HAVE_TZNAME\${ac_dB}HAVE_TZNAME\${ac_dC}1\${ac_dD} +\${ac_uA}HAVE_TZNAME\${ac_uB}HAVE_TZNAME\${ac_uC}1\${ac_uD} +\${ac_eA}HAVE_TZNAME\${ac_eB}HAVE_TZNAME\${ac_eC}1\${ac_eD} +" } @@ -1098,9 +1761,98 @@ rm -f conftest* fi +test -n "$silent" || echo "checking for whether we have altzone" +cat > conftest.${ac_ext} < +int main() { return 0; } +int t() { return altzone;; return 0; } +EOF +if eval $ac_compile; then + rm -rf conftest* + +{ +test -n "$verbose" && \ +echo " defining HAVE_ALTZONE" +echo "#define" HAVE_ALTZONE "1" >> confdefs.h +DEFS="$DEFS -DHAVE_ALTZONE=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}HAVE_ALTZONE\${ac_dB}HAVE_ALTZONE\${ac_dC}1\${ac_dD} +\${ac_uA}HAVE_ALTZONE\${ac_uB}HAVE_ALTZONE\${ac_uC}1\${ac_uD} +\${ac_eA}HAVE_ALTZONE\${ac_eB}HAVE_ALTZONE\${ac_eC}1\${ac_eD} +" +} + + +fi +rm -f conftest* + +test -n "$silent" || echo "checking for whether sys/select.h and sys/time.h may both be included" +cat > conftest.${ac_ext} < +#include +#include + +int main() { return 0; } +int t() { ;; return 0; } +EOF +if eval $ac_compile; then + rm -rf conftest* + +{ +test -n "$verbose" && \ +echo " defining SYS_SELECT_WITH_SYS_TIME" +echo "#define" SYS_SELECT_WITH_SYS_TIME "1" >> confdefs.h +DEFS="$DEFS -DSYS_SELECT_WITH_SYS_TIME=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}SYS_SELECT_WITH_SYS_TIME\${ac_dB}SYS_SELECT_WITH_SYS_TIME\${ac_dC}1\${ac_dD} +\${ac_uA}SYS_SELECT_WITH_SYS_TIME\${ac_uB}SYS_SELECT_WITH_SYS_TIME\${ac_uC}1\${ac_uD} +\${ac_eA}SYS_SELECT_WITH_SYS_TIME\${ac_eB}SYS_SELECT_WITH_SYS_TIME\${ac_eC}1\${ac_eD} +" +} + + +fi +rm -f conftest* + # checks for compiler characteristics -prog='/* Ultrix mips cc rejects this. */ + +test -n "$silent" || echo "checking for unsigned characters" +cat > conftest.${ac_ext} </dev/null; then + +{ +test -n "$verbose" && \ +echo " defining __CHAR_UNSIGNED__" +echo "#define" __CHAR_UNSIGNED__ "1" >> confdefs.h +DEFS="$DEFS -D__CHAR_UNSIGNED__=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}__CHAR_UNSIGNED__\${ac_dB}__CHAR_UNSIGNED__\${ac_dC}1\${ac_dD} +\${ac_uA}__CHAR_UNSIGNED__\${ac_uB}__CHAR_UNSIGNED__\${ac_uC}1\${ac_uD} +\${ac_eA}__CHAR_UNSIGNED__\${ac_eB}__CHAR_UNSIGNED__\${ac_eC}1\${ac_eD} +" +} + + +fi +rm -fr conftest* + + +ac_prog='/* Ultrix mips cc rejects this. */ typedef int charset[2]; const charset x; /* SunOS 4.1.1 cc rejects this. */ char const *const *ccp; @@ -1138,14 +1890,14 @@ ccp = (char const *const *) p; { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; }' -echo checking for lack of working const -cat > conftest.c < conftest.${ac_ext} <> confdefs.h +echo "#define" const "" >> confdefs.h DEFS="$DEFS -Dconst=" +ac_sed_defs="${ac_sed_defs}\${ac_dA}const\${ac_dB}const\${ac_dC}\${ac_dD} +\${ac_uA}const\${ac_uB}const\${ac_uC}\${ac_uD} +\${ac_eA}const\${ac_eB}const\${ac_eC}\${ac_eD} +" } fi rm -f conftest* -echo checking for prototypes -cat > conftest.c < conftest.${ac_ext} <> confdefs.h +DEFS="$DEFS -Dsigned=" +ac_sed_defs="${ac_sed_defs}\${ac_dA}signed\${ac_dB}signed\${ac_dC}\${ac_dD} +\${ac_uA}signed\${ac_uB}signed\${ac_uC}\${ac_uD} +\${ac_eA}signed\${ac_eB}signed\${ac_eC}\${ac_eD} +" +} + +fi +rm -f conftest* + + +test -n "$silent" || echo "checking for prototypes" +cat > conftest.${ac_ext} </dev/null; then { test -n "$verbose" && \ echo " defining HAVE_PROTOTYPES" -echo "#define" HAVE_PROTOTYPES 1 >> confdefs.h +echo "#define" HAVE_PROTOTYPES "1" >> confdefs.h DEFS="$DEFS -DHAVE_PROTOTYPES=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}HAVE_PROTOTYPES\${ac_dB}HAVE_PROTOTYPES\${ac_dC}1\${ac_dD} +\${ac_uA}HAVE_PROTOTYPES\${ac_uB}HAVE_PROTOTYPES\${ac_uC}1\${ac_uD} +\${ac_eA}HAVE_PROTOTYPES\${ac_eB}HAVE_PROTOTYPES\${ac_eC}1\${ac_eD} +" +} + have_prototypes=1 + +fi +rm -fr conftest* + +test -n "$silent" || echo "checking for variable length prototypes and stdarg.h" +cat > conftest.${ac_ext} < +int foo(int x, ...) { return 0; } +int main() { return foo(10, 11, 12); } + +EOF +eval $ac_compile +if test -s conftest && (./conftest; exit) 2>/dev/null; then + +{ +test -n "$verbose" && \ +echo " defining HAVE_STDARG_PROTOTYPES" +echo "#define" HAVE_STDARG_PROTOTYPES "1" >> confdefs.h +DEFS="$DEFS -DHAVE_STDARG_PROTOTYPES=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}HAVE_STDARG_PROTOTYPES\${ac_dB}HAVE_STDARG_PROTOTYPES\${ac_dC}1\${ac_dD} +\${ac_uA}HAVE_STDARG_PROTOTYPES\${ac_uB}HAVE_STDARG_PROTOTYPES\${ac_uC}1\${ac_uD} +\${ac_eA}HAVE_STDARG_PROTOTYPES\${ac_eB}HAVE_STDARG_PROTOTYPES\${ac_eC}1\${ac_eD} +" } have_prototypes=1 fi rm -fr conftest* if test "$have_prototypes"; then -echo checking for "bad exec* prototypes" -cat > conftest.c < conftest.${ac_ext} < -int main() { exit(0); } -int t() { char *const*t;execve("@",t,t); } +int main() { return 0; } +int t() { char **t;execve("@",t,t);; return 0; } EOF -if eval $compile; then +if eval $ac_compile; then : else rm -rf conftest* @@ -1194,8 +2012,12 @@ else { test -n "$verbose" && \ echo " defining BAD_EXEC_PROTOTYPES" -echo "#define" BAD_EXEC_PROTOTYPES 1 >> confdefs.h +echo "#define" BAD_EXEC_PROTOTYPES "1" >> confdefs.h DEFS="$DEFS -DBAD_EXEC_PROTOTYPES=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}BAD_EXEC_PROTOTYPES\${ac_dB}BAD_EXEC_PROTOTYPES\${ac_dC}1\${ac_dD} +\${ac_uA}BAD_EXEC_PROTOTYPES\${ac_uB}BAD_EXEC_PROTOTYPES\${ac_uC}1\${ac_uD} +\${ac_eA}BAD_EXEC_PROTOTYPES\${ac_eB}BAD_EXEC_PROTOTYPES\${ac_eC}1\${ac_eD} +" } fi @@ -1203,43 +2025,73 @@ rm -f conftest* fi +test -n "$silent" || echo "checking for bad static forward" +cat > conftest.${ac_ext} </dev/null; then + : +else + +{ +test -n "$verbose" && \ +echo " defining BAD_STATIC_FORWARD" +echo "#define" BAD_STATIC_FORWARD "1" >> confdefs.h +DEFS="$DEFS -DBAD_STATIC_FORWARD=1" +ac_sed_defs="${ac_sed_defs}\${ac_dA}BAD_STATIC_FORWARD\${ac_dB}BAD_STATIC_FORWARD\${ac_dC}1\${ac_dD} +\${ac_uA}BAD_STATIC_FORWARD\${ac_uB}BAD_STATIC_FORWARD\${ac_uC}1\${ac_uD} +\${ac_eA}BAD_STATIC_FORWARD\${ac_eB}BAD_STATIC_FORWARD\${ac_eC}1\${ac_eD} +" +} + +fi +rm -fr conftest* + # checks for system services # (none yet) # other checks for UNIX variants -LIBS_save="${LIBS}" +ac_save_LIBS="${LIBS}" LIBS="${LIBS} -lsun" -have_lib="" -echo checking for -lsun -cat > conftest.c < conftest.${ac_ext} < conftest.c < conftest.${ac_ext} < conftest.out 2>&1" +eval "$ac_cpp conftest.${ac_ext} > conftest.out 2>&1" if egrep "yes" conftest.out >/dev/null 2>&1; then rm -rf conftest* XENIX=1 @@ -1256,26 +2108,58 @@ if test -n "$XENIX"; then fi +# check for --with-libm=... + +LIBM=-lm +# check whether --with-libm or --without-libm was given. +withval="$with_libm" +if test -n "$withval"; then + if test "$withval" != yes +then LIBM=$withval +else echo "configure: proper usage is --with-libm=STRING" >&2; exit 1 +fi +fi + + +# check for --with-libc=... + +# check whether --with-libc or --without-libc was given. +withval="$with_libc" +if test -n "$withval"; then + if test "$withval" != yes +then LIBC=$withval +else echo "configure: proper usage is --with-libc=STRING" >&2; exit 1 +fi +fi + + # generate output files # Set default prefixes. if test -n "$prefix"; then - test -z "$exec_prefix" && exec_prefix='${prefix}' - prsub="s%^prefix\\([ ]*\\)=\\([ ]*\\).*$%prefix\\1=\\2$prefix%" + test -z "$exec_prefix" && exec_prefix='${prefix}' # Let make expand it. + ac_prsub="s%^prefix\\([ ]*\\)=\\([ ]*\\).*$%prefix\\1=\\2$prefix%" fi if test -n "$exec_prefix"; then - prsub="$prsub + ac_prsub="$ac_prsub s%^exec_prefix\\([ ]*\\)=\\([ ]*\\).*$%exec_prefix\\1=\\2$exec_prefix%" fi +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + # Quote sed substitution magic chars in DEFS. cat >conftest.def < config.status < config.status <&1; exit 1 ;; + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo running \${CONFIG_SHELL-/bin/sh} $0 $configure_args --no-create + exec \${CONFIG_SHELL-/bin/sh} $0 $configure_args --no-create ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "config.status generated by autoconf version 1.8" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; esac done -trap 'rm -f Objects/Makefile Parser/Makefile Python/Makefile; exit 1' 1 3 15 +trap 'rm -fr Makefile Objects/Makefile Parser/Makefile Python/Makefile Modules/Makefile.pre config.h conftest*; exit 1' 1 2 15 CC='$CC' +INSTALL='$INSTALL' +INSTALL_PROGRAM='$INSTALL_PROGRAM' +INSTALL_DATA='$INSTALL_DATA' RANLIB='$RANLIB' +AR='$AR' CPP='$CPP' +DLINCLDIR='$DLINCLDIR' LIBOBJS='$LIBOBJS' +LIBM='$LIBM' +LIBC='$LIBC' LIBS='$LIBS' srcdir='$srcdir' -DEFS='$DEFS' +top_srcdir='$top_srcdir' prefix='$prefix' exec_prefix='$exec_prefix' -prsub='$prsub' +ac_prsub='$ac_prsub' +ac_vpsub='$ac_vpsub' extrasub='$extrasub' EOF cat >> config.status <<\EOF -top_srcdir=$srcdir +ac_given_srcdir=$srcdir -CONFIG_FILES=${CONFIG_FILES-"Objects/Makefile Parser/Makefile Python/Makefile"} -for file in .. ${CONFIG_FILES}; do if test "x$file" != x..; then - srcdir=$top_srcdir +CONFIG_FILES=${CONFIG_FILES-"Makefile Objects/Makefile Parser/Makefile Python/Makefile Modules/Makefile.pre"} +for ac_file in .. ${CONFIG_FILES}; do if test "x$ac_file" != x..; then # Remove last slash and all that follows it. Not all systems have dirname. - dir=`echo $file|sed 's%/[^/][^/]*$%%'` - if test "$dir" != "$file"; then - test "$top_srcdir" != . && srcdir=$top_srcdir/$dir - test ! -d $dir && mkdir $dir + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file"; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/$ac_dir" + else + ac_dir_suffix= fi - echo creating $file - rm -f $file - echo "# Generated automatically from `echo $file|sed 's|.*/||'`.in by configure." > $file + + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + case "$ac_given_srcdir" in + .) srcdir=.; top_srcdir="$ac_dots." ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + comment_str="Generated automatically from `echo $ac_file|sed 's|.*/||'`.in by configure." + case "$ac_file" in + *.c | *.h | *.C | *.cc | *.m ) echo "/* $comment_str */" > "$ac_file" ;; + * ) echo "# $comment_str" > "$ac_file" ;; + esac sed -e " -$prsub +$ac_prsub +$ac_vpsub $extrasub s%@CC@%$CC%g +s%@INSTALL@%$INSTALL%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_DATA@%$INSTALL_DATA%g s%@RANLIB@%$RANLIB%g +s%@AR@%$AR%g s%@CPP@%$CPP%g +s%@DLINCLDIR@%$DLINCLDIR%g s%@LIBOBJS@%$LIBOBJS%g +s%@LIBM@%$LIBM%g +s%@LIBC@%$LIBC%g s%@LIBS@%$LIBS%g s%@srcdir@%$srcdir%g -s%@DEFS@%$DEFS% -" $top_srcdir/${file}.in >> $file +s%@top_srcdir@%$top_srcdir%g +s%@prefix@%$prefix%g +s%@exec_prefix@%$exec_prefix%g +s%@DEFS@%-DHAVE_CONFIG_H%" $ac_given_srcdir/${ac_file}.in >> $ac_file fi; done +# These sed commands are put into ac_sed_defs when defining a macro. +# They are broken into pieces to make the sed script easier to manage. +# They are passed to sed as "A NAME B NAME C VALUE D", where NAME +# is the cpp macro being defined and VALUE is the value it is being given. +# Each defining turns into a single global substitution command. +# Hopefully no one uses "!" as a variable value. +# Other candidates for the sed separators, like , and @, do get used. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s!^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='\([ ][ ]*\)[^ ]*!\1#\2' +ac_dC='\3' +ac_dD='!g' +# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". +ac_uA='s!^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='\([ ]\)!\1#\2define\3' +ac_uC=' ' +ac_uD='\4!g' +# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_eA='s!^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_eB='$!\1#\2define\3' +ac_eC=' ' +ac_eD='!g' +rm -f conftest.sed +EOF +# Turn off quoting long enough to insert the sed commands. +rm -f conftest.sh +cat > conftest.sh < conftest.s1 # Like head -20. + sed 1,${ac_max_sh_lines}d conftest.sh > conftest.s2 # Like tail +21. + # Write a limited-size here document to append to conftest.sed. + echo 'cat >> conftest.sed <> config.status + cat conftest.s1 >> config.status + echo 'CONFEOF' >> config.status + rm -f conftest.s1 conftest.sh + mv conftest.s2 conftest.sh +done +rm -f conftest.sh + +# Now back to your regularly scheduled config.status. +cat >> config.status <<\EOF +# This sed command replaces #undef's with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it in +# config.h. +cat >> conftest.sed <<\CONFEOF +s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +CONFEOF +rm -f conftest.h +# Break up the sed commands because old seds have small limits. +ac_max_sed_lines=20 + +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h"} +for ac_file in .. ${CONFIG_HEADERS}; do if test "x$ac_file" != x..; then + echo creating $ac_file + + cp $ac_given_srcdir/$ac_file.in conftest.h1 + while : + do + ac_lines=`grep -c . conftest.sed` + if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi + rm -f conftest.s1 conftest.s2 conftest.h2 + sed ${ac_max_sed_lines}q conftest.sed > conftest.s1 # Like head -20. + sed 1,${ac_max_sed_lines}d conftest.sed > conftest.s2 # Like tail +21. + sed -f conftest.s1 < conftest.h1 > conftest.h2 + rm -f conftest.s1 conftest.h1 conftest.sed + mv conftest.h2 conftest.h1 + mv conftest.s2 conftest.sed + done + rm -f conftest.sed conftest.h + echo "/* $ac_file. Generated automatically by configure. */" > conftest.h + cat conftest.h1 >> conftest.h + rm -f conftest.h1 + if cmp -s $ac_file conftest.h 2>/dev/null; then + # The file exists and we would not be changing it. + echo "$ac_file is unchanged" + rm -f conftest.h + else + rm -f $ac_file + mv conftest.h $ac_file + fi +fi; done + + exit 0 EOF chmod +x config.status -${CONFIG_SHELL-/bin/sh} config.status +test -n "$no_create" || ${CONFIG_SHELL-/bin/sh} config.status -- cgit v0.12