From cce1090d49ba91cdc06c60d8a2af04d057abe7dc Mon Sep 17 00:00:00 2001
From: Fred Drake <fdrake@acm.org>
Date: Tue, 17 Mar 1998 06:33:25 +0000
Subject: Change "\," to just "," in function signatures.  This is easier to
 maintain, works better with LaTeX2HTML, and allows some simplification of the
 python.sty macros.

---
 Doc/lib/libaifc.tex       |   8 +--
 Doc/lib/libal.tex         |   6 +--
 Doc/lib/libamoeba.tex     |   6 +--
 Doc/lib/libanydbm.tex     |   2 +-
 Doc/lib/libarray.tex      |   8 +--
 Doc/lib/libaudioop.tex    |  50 ++++++++---------
 Doc/lib/libbasehttp.tex   |   6 +--
 Doc/lib/libbastion.tex    |   2 +-
 Doc/lib/libbinhex.tex     |   4 +-
 Doc/lib/libcgi.tex        |   4 +-
 Doc/lib/libcrypt.tex      |   2 +-
 Doc/lib/libdbm.tex        |   2 +-
 Doc/lib/libdis.tex        |   4 +-
 Doc/lib/libformatter.tex  |   6 +--
 Doc/lib/libframework.tex  |  36 ++++++-------
 Doc/lib/libfuncs.tex      |  40 +++++++-------
 Doc/lib/libgdbm.tex       |   2 +-
 Doc/lib/libgl.tex         |   6 +--
 Doc/lib/libhtmllib.tex    |   4 +-
 Doc/lib/libimageop.tex    |  22 ++++----
 Doc/lib/libimgfile.tex    |   4 +-
 Doc/lib/libimp.tex        |   2 +-
 Doc/lib/libmailcap.tex    |   2 +-
 Doc/lib/libmimetools.tex  |   6 +--
 Doc/lib/libminiae.tex     |   4 +-
 Doc/lib/libmpz.tex        |   8 +--
 Doc/lib/libparser.tex     |   6 +--
 Doc/lib/libpdb.tex        |   6 +--
 Doc/lib/libpickle.tex     |   2 +-
 Doc/lib/libposix.tex      |  46 ++++++++--------
 Doc/lib/libppath.tex      |   6 +--
 Doc/lib/libprofile.tex    |  14 ++---
 Doc/lib/libquopri.tex     |   4 +-
 Doc/lib/libregex.tex      |  14 ++---
 Doc/lib/libregsub.tex     |  10 ++--
 Doc/lib/librexec.tex      |   4 +-
 Doc/lib/librgbimg.tex     |   2 +-
 Doc/lib/librotor.tex      |   2 +-
 Doc/lib/libselect.tex     |   2 +-
 Doc/lib/libsgmllib.tex    |   2 +-
 Doc/lib/libsignal.tex     |   2 +-
 Doc/lib/libsocket.tex     |   6 +--
 Doc/lib/libsocksvr.tex    |   6 +--
 Doc/lib/libstdwin.tex     |  66 +++++++++++------------
 Doc/lib/libstring.tex     | 135 +++++++++++++++++++++++-----------------------
 Doc/lib/libstruct.tex     |   4 +-
 Doc/lib/libsyslog.tex     |   2 +-
 Doc/lib/libtemplate.tex   |   2 +-
 Doc/lib/libthread.tex     |   2 +-
 Doc/lib/libtypes.tex      |   8 +--
 Doc/lib/liburllib.tex     |   4 +-
 Doc/lib/liburlparse.tex   |   2 +-
 Doc/lib/libuu.tex         |   4 +-
 Doc/lib/libwhrandom.tex   |   6 +--
 Doc/lib/libxdrlib.tex     |   6 +--
 Doc/lib/libxmllib.tex     |   4 +-
 Doc/lib/libzlib.tex       |   6 +--
 Doc/libaifc.tex           |   8 +--
 Doc/libal.tex             |   6 +--
 Doc/libamoeba.tex         |   6 +--
 Doc/libanydbm.tex         |   2 +-
 Doc/libarray.tex          |   8 +--
 Doc/libaudioop.tex        |  50 ++++++++---------
 Doc/libbasehttp.tex       |   6 +--
 Doc/libbastion.tex        |   2 +-
 Doc/libbinhex.tex         |   4 +-
 Doc/libcgi.tex            |   4 +-
 Doc/libcrypt.tex          |   2 +-
 Doc/libctb.tex            |   8 +--
 Doc/libdbm.tex            |   2 +-
 Doc/libdis.tex            |   4 +-
 Doc/libformatter.tex      |   6 +--
 Doc/libframework.tex      |  36 ++++++-------
 Doc/libfuncs.tex          |  40 +++++++-------
 Doc/libgdbm.tex           |   2 +-
 Doc/libgl.tex             |   6 +--
 Doc/libhtmllib.tex        |   4 +-
 Doc/libimageop.tex        |  22 ++++----
 Doc/libimgfile.tex        |   4 +-
 Doc/libimp.tex            |   2 +-
 Doc/libmacconsole.tex     |   2 +-
 Doc/libmacfs.tex          |  24 ++++-----
 Doc/libmacostools.tex     |   6 +--
 Doc/libmactcp.tex         |   6 +--
 Doc/libmacui.tex          |   6 +--
 Doc/libmailcap.tex        |   2 +-
 Doc/libmimetools.tex      |   6 +--
 Doc/libminiae.tex         |   4 +-
 Doc/libmpz.tex            |   8 +--
 Doc/libparser.tex         |   6 +--
 Doc/libpdb.tex            |   6 +--
 Doc/libpickle.tex         |   2 +-
 Doc/libposix.tex          |  46 ++++++++--------
 Doc/libppath.tex          |   6 +--
 Doc/libprofile.tex        |  14 ++---
 Doc/libquopri.tex         |   4 +-
 Doc/libregex.tex          |  14 ++---
 Doc/libregsub.tex         |  10 ++--
 Doc/librexec.tex          |   4 +-
 Doc/librgbimg.tex         |   2 +-
 Doc/librotor.tex          |   2 +-
 Doc/libselect.tex         |   2 +-
 Doc/libsgmllib.tex        |   2 +-
 Doc/libsignal.tex         |   2 +-
 Doc/libsocket.tex         |   6 +--
 Doc/libsocksvr.tex        |   6 +--
 Doc/libstdwin.tex         |  66 +++++++++++------------
 Doc/libstring.tex         | 135 +++++++++++++++++++++++-----------------------
 Doc/libstruct.tex         |   4 +-
 Doc/libsyslog.tex         |   2 +-
 Doc/libtemplate.tex       |   2 +-
 Doc/libthread.tex         |   2 +-
 Doc/libtypes.tex          |   8 +--
 Doc/liburllib.tex         |   4 +-
 Doc/liburlparse.tex       |   2 +-
 Doc/libuu.tex             |   4 +-
 Doc/libwhrandom.tex       |   6 +--
 Doc/libxdrlib.tex         |   6 +--
 Doc/libxmllib.tex         |   4 +-
 Doc/libzlib.tex           |   6 +--
 Doc/mac/libctb.tex        |   8 +--
 Doc/mac/libframework.tex  |  36 ++++++-------
 Doc/mac/libmacconsole.tex |   2 +-
 Doc/mac/libmacfs.tex      |  24 ++++-----
 Doc/mac/libmacostools.tex |   6 +--
 Doc/mac/libmactcp.tex     |   6 +--
 Doc/mac/libmacui.tex      |   6 +--
 Doc/mac/libminiae.tex     |   4 +-
 Doc/templates/module.tex  |   2 +-
 129 files changed, 705 insertions(+), 703 deletions(-)

diff --git a/Doc/lib/libaifc.tex b/Doc/lib/libaifc.tex
index 34df720..8bb88a1 100644
--- a/Doc/lib/libaifc.tex
+++ b/Doc/lib/libaifc.tex
@@ -24,7 +24,7 @@ second's worth occupies 2*2*44100 bytes, i.e.\ 176,400 bytes.
 Module \code{aifc} defines the following function:
 
 \setindexsubitem{(in module aifc)}
-\begin{funcdesc}{open}{file\, mode}
+\begin{funcdesc}{open}{file, mode}
 Open an AIFF or AIFF-C file and return an object instance with
 methods that are described below.  The argument file is either a
 string naming a file or a file object.  The mode is either the string
@@ -146,7 +146,7 @@ If this parameter is not set, or not set correctly, the file needs to
 support seeking.
 \end{funcdesc}
 
-\begin{funcdesc}{setcomptype}{type\, name}
+\begin{funcdesc}{setcomptype}{type, name}
 Specify the compression type.  If not specified, the audio data will
 not be compressed.  In AIFF files, compression is not possible.  The
 name parameter should be a human-readable description of the
@@ -155,14 +155,14 @@ string.  Currently the following compression types are supported:
 NONE, ULAW, ALAW, G722.
 \end{funcdesc}
 
-\begin{funcdesc}{setparams}{nchannels\, sampwidth\, framerate\, comptype\, compname}
+\begin{funcdesc}{setparams}{nchannels, sampwidth, framerate, comptype, compname}
 Set all the above parameters at once.  The argument is a tuple
 consisting of the various parameters.  This means that it is possible
 to use the result of a \code{getparams()} call as argument to
 \code{setparams()}.
 \end{funcdesc}
 
-\begin{funcdesc}{setmark}{id\, pos\, name}
+\begin{funcdesc}{setmark}{id, pos, name}
 Add a mark with the given id (larger than 0), and the given name at
 the given position.  This method can be called at any time before
 \code{close()}.
diff --git a/Doc/lib/libal.tex b/Doc/lib/libal.tex
index 63bdf1b..1126f83 100644
--- a/Doc/lib/libal.tex
+++ b/Doc/lib/libal.tex
@@ -27,7 +27,7 @@ The module defines the following functions:
 
 \setindexsubitem{(in module al)}
 
-\begin{funcdesc}{openport}{name\, direction\optional{\, config}}
+\begin{funcdesc}{openport}{name, direction\optional{, config}}
 The name and direction arguments are strings.  The optional config
 argument is a configuration object as returned by
 \code{al.newconfig()}.  The return value is an \dfn{port object};
@@ -44,12 +44,12 @@ The device argument is an integer.  The return value is a list of
 integers containing the data returned by ALqueryparams().
 \end{funcdesc}
 
-\begin{funcdesc}{getparams}{device\, list}
+\begin{funcdesc}{getparams}{device, list}
 The device argument is an integer.  The list argument is a list such
 as returned by \code{queryparams}; it is modified in place (!).
 \end{funcdesc}
 
-\begin{funcdesc}{setparams}{device\, list}
+\begin{funcdesc}{setparams}{device, list}
 The device argument is an integer.  The list argument is a list such
 as returned by \code{al.queryparams}.
 \end{funcdesc}
diff --git a/Doc/lib/libamoeba.tex b/Doc/lib/libamoeba.tex
index d471f35..3e64257 100644
--- a/Doc/lib/libamoeba.tex
+++ b/Doc/lib/libamoeba.tex
@@ -12,7 +12,7 @@ the exception \code{amoeba.error = 'amoeba.error'}.
 The module \code{amoeba} defines the following items:
 
 \setindexsubitem{(in module amoeba)}
-\begin{funcdesc}{name_append}{path\, cap}
+\begin{funcdesc}{name_append}{path, cap}
 Stores a capability in the Amoeba directory tree.
 Arguments are the pathname (a string) and the capability (a capability
 object as returned by
@@ -32,7 +32,7 @@ Returns a
 object, to which various interesting operations apply, described below.
 \end{funcdesc}
 
-\begin{funcdesc}{name_replace}{path\, cap}
+\begin{funcdesc}{name_replace}{path, cap}
 Replaces a capability in the Amoeba directory tree.
 Arguments are the pathname and the new capability.
 (This differs from
@@ -91,7 +91,7 @@ The following methods are defined for capability objects.
 Returns a list of the names of the entries in an Amoeba directory.
 \end{funcdesc}
 
-\begin{funcdesc}{b_read}{offset\, maxsize}
+\begin{funcdesc}{b_read}{offset, maxsize}
 Reads (at most)
 \var{maxsize}
 bytes from a bullet file at offset
diff --git a/Doc/lib/libanydbm.tex b/Doc/lib/libanydbm.tex
index c7e5ae3..1c46c61 100644
--- a/Doc/lib/libanydbm.tex
+++ b/Doc/lib/libanydbm.tex
@@ -13,7 +13,7 @@ will be used.   Both modules provide the same interface:
 % at the same time.
 \setindexsubitem{(in modules anydbm, dumbdbm)}
 
-\begin{funcdesc}{open}{filename\optional{\, flag\, mode}}
+\begin{funcdesc}{open}{filename\optional{, flag, mode}}
 Open the database file \var{filename} and return a corresponding object.
 The optional \var{flag} argument can be
 \code{'r'} to open an existing database for reading only,
diff --git a/Doc/lib/libarray.tex b/Doc/lib/libarray.tex
index 0380bd6..03b4933 100644
--- a/Doc/lib/libarray.tex
+++ b/Doc/lib/libarray.tex
@@ -35,7 +35,7 @@ See also built-in module \module{struct}\refbimodindex{struct}.
 
 The module defines the following function:
 
-\begin{funcdesc}{array}{typecode\optional{\, initializer}}
+\begin{funcdesc}{array}{typecode\optional{, initializer}}
 Return a new array whose items are restricted by \var{typecode}, and
 initialized from the optional \var{initializer} value, which must be a
 list or a string.  The list or string is passed to the new array's
@@ -77,7 +77,7 @@ integer values.  It is useful when reading data from a file written
 on a machine with a different byte order.
 \end{funcdesc}
 
-\begin{funcdesc}{fromfile}{f\, n}
+\begin{funcdesc}{fromfile}{f, n}
 Read \var{n} items (as machine values) from the file object \var{f}
 and append them to the end of the array.  If less than \var{n} items
 are available, \exception{EOFError} is raised, but the items that were
@@ -98,12 +98,12 @@ array of machine values (i.e. as if it had been read from a
 file using the \method{fromfile()} method).
 \end{funcdesc}
 
-\begin{funcdesc}{insert}{i\, x}
+\begin{funcdesc}{insert}{i, x}
 Insert a new item with value \var{x} in the array before position
 \var{i}.
 \end{funcdesc}
 
-\begin{funcdesc}{read}{f\, n}
+\begin{funcdesc}{read}{f, n}
 \deprecated {1.5.1}
   {Use the \method{fromfile()} method.}
 Read \var{n} items (as machine values) from the file object \var{f}
diff --git a/Doc/lib/libaudioop.tex b/Doc/lib/libaudioop.tex
index 69a3a83..887cac9 100644
--- a/Doc/lib/libaudioop.tex
+++ b/Doc/lib/libaudioop.tex
@@ -19,46 +19,46 @@ This exception is raised on all errors, such as unknown number of bytes
 per sample, etc.
 \end{excdesc}
 
-\begin{funcdesc}{add}{fragment1\, fragment2\, width}
+\begin{funcdesc}{add}{fragment1, fragment2, width}
 Return a fragment which is the addition of the two samples passed as
 parameters.  \var{width} is the sample width in bytes, either
 \code{1}, \code{2} or \code{4}.  Both fragments should have the same
 length.
 \end{funcdesc}
 
-\begin{funcdesc}{adpcm2lin}{adpcmfragment\, width\, state}
+\begin{funcdesc}{adpcm2lin}{adpcmfragment, width, state}
 Decode an Intel/DVI ADPCM coded fragment to a linear fragment.  See
 the description of \code{lin2adpcm} for details on ADPCM coding.
 Return a tuple \code{(\var{sample}, \var{newstate})} where the sample
 has the width specified in \var{width}.
 \end{funcdesc}
 
-\begin{funcdesc}{adpcm32lin}{adpcmfragment\, width\, state}
+\begin{funcdesc}{adpcm32lin}{adpcmfragment, width, state}
 Decode an alternative 3-bit ADPCM code.  See \code{lin2adpcm3} for
 details.
 \end{funcdesc}
 
-\begin{funcdesc}{avg}{fragment\, width}
+\begin{funcdesc}{avg}{fragment, width}
 Return the average over all samples in the fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{avgpp}{fragment\, width}
+\begin{funcdesc}{avgpp}{fragment, width}
 Return the average peak-peak value over all samples in the fragment.
 No filtering is done, so the usefulness of this routine is
 questionable.
 \end{funcdesc}
 
-\begin{funcdesc}{bias}{fragment\, width\, bias}
+\begin{funcdesc}{bias}{fragment, width, bias}
 Return a fragment that is the original fragment with a bias added to
 each sample.
 \end{funcdesc}
 
-\begin{funcdesc}{cross}{fragment\, width}
+\begin{funcdesc}{cross}{fragment, width}
 Return the number of zero crossings in the fragment passed as an
 argument.
 \end{funcdesc}
 
-\begin{funcdesc}{findfactor}{fragment\, reference}
+\begin{funcdesc}{findfactor}{fragment, reference}
 Return a factor \var{F} such that
 \code{rms(add(fragment, mul(reference, -F)))} is minimal, i.e.,
 return the factor with which you should multiply \var{reference} to
@@ -68,7 +68,7 @@ should both contain 2-byte samples.
 The time taken by this routine is proportional to \code{len(fragment)}. 
 \end{funcdesc}
 
-\begin{funcdesc}{findfit}{fragment\, reference}
+\begin{funcdesc}{findfit}{fragment, reference}
 This routine (which only accepts 2-byte sample fragments)
 
 Try to match \var{reference} as well as possible to a portion of
@@ -82,7 +82,7 @@ and \var{factor} is the (floating-point) factor as per
 \code{findfactor}.
 \end{funcdesc}
 
-\begin{funcdesc}{findmax}{fragment\, length}
+\begin{funcdesc}{findmax}{fragment, length}
 Search \var{fragment} for a slice of length \var{length} samples (not
 bytes!)\ with maximum energy, i.e., return \var{i} for which
 \code{rms(fragment[i*2:(i+length)*2])} is maximal.  The fragments
@@ -91,15 +91,15 @@ should both contain 2-byte samples.
 The routine takes time proportional to \code{len(fragment)}.
 \end{funcdesc}
 
-\begin{funcdesc}{getsample}{fragment\, width\, index}
+\begin{funcdesc}{getsample}{fragment, width, index}
 Return the value of sample \var{index} from the fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{lin2lin}{fragment\, width\, newwidth}
+\begin{funcdesc}{lin2lin}{fragment, width, newwidth}
 Convert samples between 1-, 2- and 4-byte formats.
 \end{funcdesc}
 
-\begin{funcdesc}{lin2adpcm}{fragment\, width\, state}
+\begin{funcdesc}{lin2adpcm}{fragment, width, state}
 Convert samples to 4 bit Intel/DVI ADPCM encoding.  ADPCM coding is an
 adaptive coding scheme, whereby each 4 bit number is the difference
 between one sample and the next, divided by a (varying) step.  The
@@ -113,41 +113,41 @@ initial call \code{None} can be passed as the state.  \var{adpcmfrag}
 is the ADPCM coded fragment packed 2 4-bit values per byte.
 \end{funcdesc}
 
-\begin{funcdesc}{lin2adpcm3}{fragment\, width\, state}
+\begin{funcdesc}{lin2adpcm3}{fragment, width, state}
 This is an alternative ADPCM coder that uses only 3 bits per sample.
 It is not compatible with the Intel/DVI ADPCM coder and its output is
 not packed (due to laziness on the side of the author).  Its use is
 discouraged.
 \end{funcdesc}
 
-\begin{funcdesc}{lin2ulaw}{fragment\, width}
+\begin{funcdesc}{lin2ulaw}{fragment, width}
 Convert samples in the audio fragment to U-LAW encoding and return
 this as a Python string.  U-LAW is an audio encoding format whereby
 you get a dynamic range of about 14 bits using only 8 bit samples.  It
 is used by the Sun audio hardware, among others.
 \end{funcdesc}
 
-\begin{funcdesc}{minmax}{fragment\, width}
+\begin{funcdesc}{minmax}{fragment, width}
 Return a tuple consisting of the minimum and maximum values of all
 samples in the sound fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{max}{fragment\, width}
+\begin{funcdesc}{max}{fragment, width}
 Return the maximum of the \emph{absolute value} of all samples in a
 fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{maxpp}{fragment\, width}
+\begin{funcdesc}{maxpp}{fragment, width}
 Return the maximum peak-peak value in the sound fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{mul}{fragment\, width\, factor}
+\begin{funcdesc}{mul}{fragment, width, factor}
 Return a fragment that has all samples in the original framgent
 multiplied by the floating-point value \var{factor}.  Overflow is
 silently ignored.
 \end{funcdesc}
 
-\begin{funcdesc}{ratecv}{fragment\, width\, nchannels\, inrate\, outrate\, state\optional{\, weightA\, weightB}}
+\begin{funcdesc}{ratecv}{fragment, width, nchannels, inrate, outrate, state\optional{, weightA, weightB}}
 Convert the frame rate of the input fragment.
 
 \code{State} is a tuple containing the state of the converter.  The
@@ -158,11 +158,11 @@ The \code{weightA} and \code{weightB} arguments are parameters for a
 simple digital filter and default to 1 and 0 respectively.
 \end{funcdesc}
 
-\begin{funcdesc}{reverse}{fragment\, width}
+\begin{funcdesc}{reverse}{fragment, width}
 Reverse the samples in a fragment and returns the modified fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{rms}{fragment\, width}
+\begin{funcdesc}{rms}{fragment, width}
 Return the root-mean-square of the fragment, i.e.
 \iftexi
 the square root of the quotient of the sum of all squared sample value,
@@ -177,20 +177,20 @@ divided by the sumber of samples.
 This is a measure of the power in an audio signal.
 \end{funcdesc}
 
-\begin{funcdesc}{tomono}{fragment\, width\, lfactor\, rfactor} 
+\begin{funcdesc}{tomono}{fragment, width, lfactor, rfactor} 
 Convert a stereo fragment to a mono fragment.  The left channel is
 multiplied by \var{lfactor} and the right channel by \var{rfactor}
 before adding the two channels to give a mono signal.
 \end{funcdesc}
 
-\begin{funcdesc}{tostereo}{fragment\, width\, lfactor\, rfactor}
+\begin{funcdesc}{tostereo}{fragment, width, lfactor, rfactor}
 Generate a stereo fragment from a mono fragment.  Each pair of samples
 in the stereo fragment are computed from the mono sample, whereby left
 channel samples are multiplied by \var{lfactor} and right channel
 samples by \var{rfactor}.
 \end{funcdesc}
 
-\begin{funcdesc}{ulaw2lin}{fragment\, width}
+\begin{funcdesc}{ulaw2lin}{fragment, width}
 Convert sound fragments in ULAW encoding to linearly encoded sound
 fragments.  ULAW encoding always uses 8 bits samples, so \var{width}
 refers only to the sample width of the output fragment here.
diff --git a/Doc/lib/libbasehttp.tex b/Doc/lib/libbasehttp.tex
index 12d9483..2a4a7d0 100644
--- a/Doc/lib/libbasehttp.tex
+++ b/Doc/lib/libbasehttp.tex
@@ -157,7 +157,7 @@ followed by text composed using the \member{error_message_format}
 class variable.
 \end{funcdesc}
 
-\begin{funcdesc}{send_response}{code\optional{\, message}}
+\begin{funcdesc}{send_response}{code\optional{, message}}
 Sends a response header and logs the accepted request. The HTTP
 response line is sent, followed by \emph{Server} and \emph{Date}
 headers. The values for these two headers are picked up from the
@@ -165,7 +165,7 @@ headers. The values for these two headers are picked up from the
 respectively.
 \end{funcdesc}
 
-\begin{funcdesc}{send_header}{keyword\, value}
+\begin{funcdesc}{send_header}{keyword, value}
 Writes a specific MIME header to the output stream. \var{keyword}
 should specify the header keyword, with \var{value} specifying
 its value.
@@ -176,7 +176,7 @@ Sends a blank line, indicating the end of the MIME headers in
 the response.
 \end{funcdesc}
 
-\begin{funcdesc}{log_request}{\optional{code\optional{\, size}}}
+\begin{funcdesc}{log_request}{\optional{code\optional{, size}}}
 Logs an accepted (successful) request. \var{code} should specify
 the numeric HTTP code associated with the response. If a size of
 the response is available, then it should be passed as the
diff --git a/Doc/lib/libbastion.tex b/Doc/lib/libbastion.tex
index 7b7cba6..c405c64 100644
--- a/Doc/lib/libbastion.tex
+++ b/Doc/lib/libbastion.tex
@@ -17,7 +17,7 @@ other, unsafe attributes.
 
 % I've punted on the issue of documenting keyword arguments for now.
 
-\begin{funcdesc}{Bastion}{object\optional{\, filter\, name\, class}}
+\begin{funcdesc}{Bastion}{object\optional{, filter, name, class}}
 Protect the object \var{object}, returning a bastion for the
 object.  Any attempt to access one of the object's attributes will
 have to be approved by the \var{filter} function; if the access is
diff --git a/Doc/lib/libbinhex.tex b/Doc/lib/libbinhex.tex
index aae5074..560b401 100644
--- a/Doc/lib/libbinhex.tex
+++ b/Doc/lib/libbinhex.tex
@@ -11,14 +11,14 @@ The \code{binhex} module defines the following functions:
 
 \setindexsubitem{(in module binhex)}
 
-\begin{funcdesc}{binhex}{input\, output}
+\begin{funcdesc}{binhex}{input, output}
 Convert a binary file with filename \var{input} to binhex file
 \var{output}. The \var{output} parameter can either be a filename or a
 file-like object (any object supporting a \var{write} and \var{close}
 method).
 \end{funcdesc}
 
-\begin{funcdesc}{hexbin}{input\optional{\, output}}
+\begin{funcdesc}{hexbin}{input\optional{, output}}
 Decode a binhex file \var{input}. \var{input} may be a filename or a
 file-like object supporting \var{read} and \var{close} methods.
 The resulting file is written to a file named \var{output}, unless the
diff --git a/Doc/lib/libcgi.tex b/Doc/lib/libcgi.tex
index fa2b6b7..55abd10 100644
--- a/Doc/lib/libcgi.tex
+++ b/Doc/lib/libcgi.tex
@@ -191,7 +191,7 @@ Parse a query string given as a string argument (data of type
 \mimetype{application/x-www-form-urlencoded}).
 \end{funcdesc}
 
-\begin{funcdesc}{parse_multipart}{fp\, pdict}
+\begin{funcdesc}{parse_multipart}{fp, pdict}
 Parse input of type \mimetype{multipart/form-data} (for 
 file uploads).  Arguments are \var{fp} for the input file and
 \var{pdict} for the dictionary containing other parameters of
@@ -236,7 +236,7 @@ Print a list of useful (used by CGI) environment variables in
 HTML.
 \end{funcdesc}
 
-\begin{funcdesc}{escape}{s\optional{\, quote}}
+\begin{funcdesc}{escape}{s\optional{, quote}}
 Convert the characters
 \character{\&}, \character{<} and \character{>} in string \var{s} to
 HTML-safe sequences.  Use this if you need to display text that might
diff --git a/Doc/lib/libcrypt.tex b/Doc/lib/libcrypt.tex
index 777f87e..a4c0bb7 100644
--- a/Doc/lib/libcrypt.tex
+++ b/Doc/lib/libcrypt.tex
@@ -10,7 +10,7 @@ attempting to crack \UNIX{} passwords with a dictionary.
 \index{crypt(3)}
 
 \setindexsubitem{(in module crypt)}
-\begin{funcdesc}{crypt}{word\, salt} 
+\begin{funcdesc}{crypt}{word, salt} 
 \var{word} will usually be a user's password.  \var{salt} is a
 2-character string which will be used to select one of 4096 variations
 of DES\indexii{cipher}{DES}.  The characters in \var{salt} must be
diff --git a/Doc/lib/libdbm.tex b/Doc/lib/libdbm.tex
index 416a6b0..35e0b4c 100644
--- a/Doc/lib/libdbm.tex
+++ b/Doc/lib/libdbm.tex
@@ -20,7 +20,7 @@ Raised on dbm-specific errors, such as I/O errors. \code{KeyError} is
 raised for general mapping errors like specifying an incorrect key.
 \end{excdesc}
 
-\begin{funcdesc}{open}{filename\, \optional{flag\, \optional{mode}}}
+\begin{funcdesc}{open}{filename, \optional{flag, \optional{mode}}}
 Open a dbm database and return a dbm object.  The \var{filename}
 argument is the name of the database file (without the \file{.dir} or
 \file{.pag} extensions).
diff --git a/Doc/lib/libdis.tex b/Doc/lib/libdis.tex
index b4c74fb..e11a1f6 100644
--- a/Doc/lib/libdis.tex
+++ b/Doc/lib/libdis.tex
@@ -49,7 +49,7 @@ traceback if none was passed.  The instruction causing the exception
 is indicated.
 \end{funcdesc}
 
-\begin{funcdesc}{disassemble}{code\optional{\, lasti}}
+\begin{funcdesc}{disassemble}{code\optional{, lasti}}
 Disassembles a code object, indicating the last instruction if \var{lasti}
 was provided.  The output is divided in the following columns:
 \begin{itemize}
@@ -65,7 +65,7 @@ variable names, constant values, branch targets, and compare
 operators.
 \end{funcdesc}
 
-\begin{funcdesc}{disco}{code\optional{\, lasti}}
+\begin{funcdesc}{disco}{code\optional{, lasti}}
 A synonym for disassemble.  It is more convenient to type, and kept
 for compatibility with earlier Python releases.
 \end{funcdesc}
diff --git a/Doc/lib/libformatter.tex b/Doc/lib/libformatter.tex
index 8c9ab3e..5d06995 100644
--- a/Doc/lib/libformatter.tex
+++ b/Doc/lib/libformatter.tex
@@ -66,7 +66,7 @@ Add a hard line break if one does not already exist.  This does not
 break the logical paragraph.
 \end{funcdesc}
 
-\begin{funcdesc}{add_hor_rule}{*args\, **kw}
+\begin{funcdesc}{add_hor_rule}{*args, **kw}
 Insert a horizontal rule in the output.  A hard break is inserted if
 there is data in the current paragraph, but the logical paragraph is
 not broken.  The arguments and keywords are passed on to the writer's
@@ -268,7 +268,7 @@ lines, or the equivelent.  The \var{blankline} value will be an
 integer.
 \end{funcdesc}
 
-\begin{funcdesc}{send_hor_rule}{*args\, **kw}
+\begin{funcdesc}{send_hor_rule}{*args, **kw}
 Display a horizontal rule on the output device.  The arguments to this
 method are entirely application- and writer-specific, and should be
 interpreted with care.  The method implementation may assume that a
@@ -317,7 +317,7 @@ else.  Each method simply announces itself by printing its name and
 arguments on standard output.
 \end{classdesc}
 
-\begin{classdesc}{DumbWriter}{\optional{file\optional{\, maxcol\code{ = 72}}}}
+\begin{classdesc}{DumbWriter}{\optional{file\optional{, maxcol\code{ = 72}}}}
 Simple writer class which writes output on the file object passed in
 as \var{file} or, if \var{file} is omitted, on standard output.  The
 output is simply word-wrapped to the number of columns specified by
diff --git a/Doc/lib/libframework.tex b/Doc/lib/libframework.tex
index 012b8c5..6b8c5fa 100644
--- a/Doc/lib/libframework.tex
+++ b/Doc/lib/libframework.tex
@@ -31,14 +31,14 @@ An object representing the menubar. This object is usually not created
 by the user.
 \end{funcdesc}
 
-\begin{funcdesc}{Menu}{bar\, title\optional{\, after}}
+\begin{funcdesc}{Menu}{bar, title\optional{, after}}
 An object representing a menu. Upon creation you pass the
 \code{MenuBar} the menu appears in, the \var{title} string and a
 position (1-based) \var{after} where the menu should appear (default:
 at the end).
 \end{funcdesc}
 
-\begin{funcdesc}{MenuItem}{menu\, title\optional{\, shortcut\, callback}}
+\begin{funcdesc}{MenuItem}{menu, title\optional{, shortcut, callback}}
 Create a menu item object. The arguments are the menu to crate the
 item it, the item title string and optionally the keyboard shortcut
 and a callback routine. The callback is called with the arguments
@@ -58,7 +58,7 @@ correct dimming for all menu items based on the current front window.
 Add a separator to the end of a menu.
 \end{funcdesc}
 
-\begin{funcdesc}{SubMenu}{menu\, label}
+\begin{funcdesc}{SubMenu}{menu, label}
 Create a submenu named \var{label} under menu \var{menu}. The menu
 object is returned.
 \end{funcdesc}
@@ -72,7 +72,7 @@ which the window belongs. The window is not displayed until later.
 Creates a modeless dialog window.
 \end{funcdesc}
 
-\begin{funcdesc}{windowbounds}{width\, height}
+\begin{funcdesc}{windowbounds}{width, height}
 Return a \code{(left, top, right, bottom)} tuple suitable for creation
 of a window of given width and height. The window will be staggered
 with respect to previous windows, and an attempt is made to keep the
@@ -104,7 +104,7 @@ application. Alternatively, override the \code{do_about} method for
 more elaborate about messages.
 \end{funcdesc}
 
-\begin{funcdesc}{mainloop}{\optional{mask\, wait}}
+\begin{funcdesc}{mainloop}{\optional{mask, wait}}
 This routine is the main event loop, call it to set your application
 rolling. \var{Mask} is the mask of events you want to handle,
 \var{wait} is the number of ticks you want to leave to other
@@ -145,7 +145,7 @@ The old on/off value is returned.
 Terminate the event \code{mainloop} at the next convenient moment.
 \end{funcdesc}
 
-\begin{funcdesc}{do_char}{c\, event}
+\begin{funcdesc}{do_char}{c, event}
 The user typed character \var{c}. The complete details of the event
 can be found in the \var{event} structure. This method can also be
 provided in a \code{Window} object, which overrides the
@@ -181,22 +181,22 @@ Override this method to do any special processing on window
 close. Call \code{self.do_postclose} to cleanup the parent state.
 \end{funcdesc}
 
-\begin{funcdesc}{do_postresize}{width\, height\, macoswindowid}
+\begin{funcdesc}{do_postresize}{width, height, macoswindowid}
 Called after the window is resized. Override if more needs to be done
 than calling \code{InvalRect}.
 \end{funcdesc}
 
-\begin{funcdesc}{do_contentclick}{local\, modifiers\, event}
+\begin{funcdesc}{do_contentclick}{local, modifiers, event}
 The user clicked in the content part of a window. The arguments are
 the coordinates (window-relative), the key modifiers and the raw
 event.
 \end{funcdesc}
 
-\begin{funcdesc}{do_update}{macoswindowid\, event}
+\begin{funcdesc}{do_update}{macoswindowid, event}
 An update event for the window was received. Redraw the window.
 \end{funcdesc}
 
-\begin{funcdesc}{do_activate}{activate\, event}
+\begin{funcdesc}{do_activate}{activate, event}
 The window was activated (\code{activate==1}) or deactivated
 (\code{activate==0}). Handle things like focus highlighting, etc.
 \end{funcdesc}
@@ -208,7 +208,7 @@ ControlsWindow objects have the following methods besides those of
 
 \setindexsubitem{(ControlsWindow method)}
 
-\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event}
+\begin{funcdesc}{do_controlhit}{window, control, pcode, event}
 Part \code{pcode} of control \code{control} was hit by the
 user. Tracking and such has already been taken care of.
 \end{funcdesc}
@@ -220,7 +220,7 @@ extra methods:
 
 \setindexsubitem{(ScrolledWindow method)}
 
-\begin{funcdesc}{scrollbars}{\optional{wantx\, wanty}}
+\begin{funcdesc}{scrollbars}{\optional{wantx, wanty}}
 Create (or destroy) horizontal and vertical scrollbars. The arguments
 specify which you want (default: both). The scrollbars always have
 minimum \code{0} and maximum \code{32767}.
@@ -238,32 +238,32 @@ Call this method when the document has changed. It will call
 \code{getscrollbarvalues} and update the scrollbars.
 \end{funcdesc}
 
-\begin{funcdesc}{scrollbar_callback}{which\, what\, value}
+\begin{funcdesc}{scrollbar_callback}{which, what, value}
 Supplied by you and called after user interaction. \code{Which} will
 be \code{'x'} or \code{'y'}, \code{what} will be \code{'-'},
 \code{'--'}, \code{'set'}, \code{'++'} or \code{'+'}. For
 \code{'set'}, \code{value} will contain the new scrollbar position.
 \end{funcdesc}
 
-\begin{funcdesc}{scalebarvalues}{absmin\, absmax\, curmin\, curmax}
+\begin{funcdesc}{scalebarvalues}{absmin, absmax, curmin, curmax}
 Auxiliary method to help you calculate values to return from
 \code{getscrollbarvalues}. You pass document minimum and maximum value
 and topmost (leftmost) and bottommost (rightmost) visible values and
 it returns the correct number or \code{None}.
 \end{funcdesc}
 
-\begin{funcdesc}{do_activate}{onoff\, event}
+\begin{funcdesc}{do_activate}{onoff, event}
 Takes care of dimming/highlighting scrollbars when a window becomes
 frontmost vv. If you override this method call this one at the end of
 your method.
 \end{funcdesc}
 
-\begin{funcdesc}{do_postresize}{width\, height\, window}
+\begin{funcdesc}{do_postresize}{width, height, window}
 Moves scrollbars to the correct position. Call this method initially
 if you override it.
 \end{funcdesc}
 
-\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event}
+\begin{funcdesc}{do_controlhit}{window, control, pcode, event}
 Handles scrollbar interaction. If you override it call this method
 first, a nonzero return value indicates the hit was in the scrollbars
 and has been handled.
@@ -281,7 +281,7 @@ Create the dialog window, from the DLOG resource with id
 \var{resid}. The dialog object is stored in \code{self.wid}.
 \end{funcdesc}
 
-\begin{funcdesc}{do_itemhit}{item\, event}
+\begin{funcdesc}{do_itemhit}{item, event}
 Item number \var{item} was hit. You are responsible for redrawing
 toggle buttons, etc.
 \end{funcdesc}
diff --git a/Doc/lib/libfuncs.tex b/Doc/lib/libfuncs.tex
index d00ba10..e914e80 100644
--- a/Doc/lib/libfuncs.tex
+++ b/Doc/lib/libfuncs.tex
@@ -54,7 +54,7 @@ find the \code{eggs} variable.
   complex number, its magnitude is returned.
 \end{funcdesc}
 
-\begin{funcdesc}{apply}{function\, args\optional{, keywords}}
+\begin{funcdesc}{apply}{function, args\optional{, keywords}}
 The \var{function} argument must be a callable object (a user-defined or
 built-in function or method, or a class object) and the \var{args}
 argument must be a tuple.  The \var{function} is called with
@@ -82,20 +82,20 @@ class instances are callable if they have a \method{__call__()} method.
   inclusive.
 \end{funcdesc}
 
-\begin{funcdesc}{cmp}{x\, y}
+\begin{funcdesc}{cmp}{x, y}
   Compare the two objects \var{x} and \var{y} and return an integer
   according to the outcome.  The return value is negative if \code{\var{x}
   < \var{y}}, zero if \code{\var{x} == \var{y}} and strictly positive if
   \code{\var{x} > \var{y}}.
 \end{funcdesc}
 
-\begin{funcdesc}{coerce}{x\, y}
+\begin{funcdesc}{coerce}{x, y}
   Return a tuple consisting of the two numeric arguments converted to
   a common type, using the same rules as used by arithmetic
   operations.
 \end{funcdesc}
 
-\begin{funcdesc}{compile}{string\, filename\, kind}
+\begin{funcdesc}{compile}{string, filename, kind}
   Compile the \var{string} into a code object.  Code objects can be
   executed by an \keyword{exec} statement or evaluated by a call to
   \function{eval()}.  The \var{filename} argument should
@@ -117,7 +117,7 @@ class instances are callable if they have a \method{__call__()} method.
   \function{long()} and \function{float()}.
 \end{funcdesc}
 
-\begin{funcdesc}{delattr}{object\, name}
+\begin{funcdesc}{delattr}{object, name}
   This is a relative of \function{setattr()}.  The arguments are an
   object and a string.  The string must be the name
   of one of the object's attributes.  The function deletes
@@ -146,7 +146,7 @@ class instances are callable if they have a \method{__call__()} method.
 \end{verbatim}
 \end{funcdesc}
 
-\begin{funcdesc}{divmod}{a\, b}
+\begin{funcdesc}{divmod}{a, b}
   Take two numbers as arguments and return a pair of numbers consisting
   of their quotient and remainder when using long division.  With mixed
   operand types, the rules for binary arithmetic operators apply.  For
@@ -156,7 +156,7 @@ class instances are callable if they have a \method{__call__()} method.
   \code{(math.floor(\var{a} / \var{b}), \var{a} \%{} \var{b})}.
 \end{funcdesc}
 
-\begin{funcdesc}{eval}{expression\optional{\, globals\optional{\, locals}}}
+\begin{funcdesc}{eval}{expression\optional{, globals\optional{, locals}}}
   The arguments are a string and two optional dictionaries.  The
   \var{expression} argument is parsed and evaluated as a Python
   expression (technically speaking, a condition list) using the
@@ -188,7 +188,7 @@ class instances are callable if they have a \method{__call__()} method.
   \function{execfile()}.
 \end{funcdesc}
 
-\begin{funcdesc}{execfile}{file\optional{\, globals\optional{\, locals}}}
+\begin{funcdesc}{execfile}{file\optional{, globals\optional{, locals}}}
   This function is similar to the
   \keyword{exec} statement, but parses a file instead of a string.  It
   is different from the \keyword{import} statement in that it does not
@@ -206,7 +206,7 @@ class instances are callable if they have a \method{__call__()} method.
   \code{None}.
 \end{funcdesc}
 
-\begin{funcdesc}{filter}{function\, list}
+\begin{funcdesc}{filter}{function, list}
 Construct a list from those elements of \var{list} for which
 \var{function} returns true.  If \var{list} is a string or a tuple,
 the result also has that type; otherwise it is always a list.  If
@@ -226,7 +226,7 @@ removed.
   returned.
 \end{funcdesc}
 
-\begin{funcdesc}{getattr}{object\, name}
+\begin{funcdesc}{getattr}{object, name}
   The arguments are an object and a string.  The string must be the
   name of one of the object's attributes.  The result is the value of
   that attribute.  For example, \code{getattr(\var{x},
@@ -240,7 +240,7 @@ function or method, this is the module where it is defined, not the
 module from which it is called).
 \end{funcdesc}
 
-\begin{funcdesc}{hasattr}{object\, name}
+\begin{funcdesc}{hasattr}{object, name}
   The arguments are an object and a string.  The result is 1 if the
   string is the name of one of the object's attributes, 0 if not.
   (This is implemented by calling \code{getattr(\var{object},
@@ -355,7 +355,7 @@ desired effect.
   see the description of \function{int()}.
 \end{funcdesc}
 
-\begin{funcdesc}{map}{function\, list\, ...}
+\begin{funcdesc}{map}{function, list, ...}
 Apply \var{function} to every item of \var{list} and return a list
 of the results.  If additional \var{list} arguments are passed, 
 \var{function} must take that many arguments and is applied to
@@ -388,7 +388,7 @@ any kind of sequence; the result is always a list.
   \exception{OverflowError} exception.
 \end{funcdesc}
 
-\begin{funcdesc}{open}{filename\optional{\, mode\optional{\, bufsize}}}
+\begin{funcdesc}{open}{filename\optional{, mode\optional{, bufsize}}}
   Return a new file object (described earlier under Built-in Types).
   The first two arguments are the same as for \code{stdio}'s
   \cfunction{fopen()}: \var{filename} is the file name to be opened,
@@ -423,7 +423,7 @@ there's no reliable way to determine whether this is the case.}
   \function{chr()}.
 \end{funcdesc}
 
-\begin{funcdesc}{pow}{x\, y\optional{\, z}}
+\begin{funcdesc}{pow}{x, y\optional{, z}}
   Return \var{x} to the power \var{y}; if \var{z} is present, return
   \var{x} to the power \var{y}, modulo \var{z} (computed more
   efficiently than \code{pow(\var{x}, \var{y}) \% \var{z}}).
@@ -435,7 +435,7 @@ there's no reliable way to determine whether this is the case.}
   35000)} is not allowed.
 \end{funcdesc}
 
-\begin{funcdesc}{range}{\optional{start\,} stop\optional{\, step}}
+\begin{funcdesc}{range}{\optional{start,} stop\optional{, step}}
   This is a versatile function to create lists containing arithmetic
   progressions.  It is most often used in \keyword{for} loops.  The
   arguments must be plain integers.  If the \var{step} argument is
@@ -487,7 +487,7 @@ If the \module{readline} module was loaded, then
 line editing and history features.
 \end{funcdesc}
 
-\begin{funcdesc}{reduce}{function\, list\optional{\, initializer}}
+\begin{funcdesc}{reduce}{function, list\optional{, initializer}}
 Apply the binary \var{function} to the items of \var{list} so as to
 reduce the list to a single value.  E.g.,
 \code{reduce(lambda x, y: x*y, \var{list}, 1)} returns the product of
@@ -551,7 +551,7 @@ to return a string that would yield an object with the same value
 when passed to \function{eval()}.
 \end{funcdesc}
 
-\begin{funcdesc}{round}{x\, n}
+\begin{funcdesc}{round}{x, n}
   Return the floating point value \var{x} rounded to \var{n} digits
   after the decimal point.  If \var{n} is omitted, it defaults to zero.
   The result is a floating point number.  Values are rounded to the
@@ -560,7 +560,7 @@ when passed to \function{eval()}.
   \code{round(0.5)} is \code{1.0} and \code{round(-0.5)} is \code{-1.0}).
 \end{funcdesc}
 
-\begin{funcdesc}{setattr}{object\, name\, value}
+\begin{funcdesc}{setattr}{object, name, value}
   This is the counterpart of \function{getattr()}.  The arguments are an
   object, a string and an arbitrary value.  The string must be the name
   of one of the object's attributes.  The function assigns the value to
@@ -569,7 +569,7 @@ when passed to \function{eval()}.
   \code{\var{x}.\var{foobar} = 123}.
 \end{funcdesc}
 
-\begin{funcdesc}{slice}{\optional{start\,} stop\optional{\, step}}
+\begin{funcdesc}{slice}{\optional{start,} stop\optional{, step}}
 Return a slice object representing the set of indices specified by
 \code{range(\var{start}, \var{stop}, \var{step})}.  The \var{start}
 and \var{step} arguments default to None.  Slice objects have
@@ -623,7 +623,7 @@ cannot normally be affected this way, but variables retrieved from
 other scopes (e.g. modules) can be.  This may change.}
 \end{funcdesc}
 
-\begin{funcdesc}{xrange}{\optional{start\,} stop\optional{\, step}}
+\begin{funcdesc}{xrange}{\optional{start,} stop\optional{, step}}
 This function is very similar to \function{range()}, but returns an
 ``xrange object'' instead of a list.  This is an opaque sequence type
 which yields the same values as the corresponding list, without
diff --git a/Doc/lib/libgdbm.tex b/Doc/lib/libgdbm.tex
index 73fc9ab..08d447f 100644
--- a/Doc/lib/libgdbm.tex
+++ b/Doc/lib/libgdbm.tex
@@ -35,7 +35,7 @@ Raised on \code{gdbm}-specific errors, such as I/O errors. \code{KeyError} is
 raised for general mapping errors like specifying an incorrect key.
 \end{excdesc}
 
-\begin{funcdesc}{open}{filename\, \optional{flag\, \optional{mode}}}
+\begin{funcdesc}{open}{filename, \optional{flag, \optional{mode}}}
 Open a \code{gdbm} database and return a \code{gdbm} object.  The
 \var{filename} argument is the name of the database file.
 
diff --git a/Doc/lib/libgl.tex b/Doc/lib/libgl.tex
index b694d86..7208695 100644
--- a/Doc/lib/libgl.tex
+++ b/Doc/lib/libgl.tex
@@ -119,7 +119,7 @@ Similar to
 but the pairs have the point first and the normal second.
 \end{funcdesc}
 
-\begin{funcdesc}{nurbssurface}{s_k\, t_k\, ctl\, s_ord\, t_ord\, type}
+\begin{funcdesc}{nurbssurface}{s_k, t_k, ctl, s_ord, t_ord, type}
 % XXX s_k[], t_k[], ctl[][]
 Defines a nurbs surface.
 The dimensions of
@@ -129,13 +129,13 @@ are computed as follows:
 \code{[len(\var{t_k}) - \var{t_ord}]}.
 \end{funcdesc}
 
-\begin{funcdesc}{nurbscurve}{knots\, ctlpoints\, order\, type}
+\begin{funcdesc}{nurbscurve}{knots, ctlpoints, order, type}
 Defines a nurbs curve.
 The length of ctlpoints is
 \code{len(\var{knots}) - \var{order}}.
 \end{funcdesc}
 
-\begin{funcdesc}{pwlcurve}{points\, type}
+\begin{funcdesc}{pwlcurve}{points, type}
 Defines a piecewise-linear curve.
 \var{points}
 is a list of points.
diff --git a/Doc/lib/libhtmllib.tex b/Doc/lib/libhtmllib.tex
index c3c9c9f..dff837c 100644
--- a/Doc/lib/libhtmllib.tex
+++ b/Doc/lib/libhtmllib.tex
@@ -86,7 +86,7 @@ affects the operation of \method{handle_data()} and \method{save_end()}.
 
 \setindexsubitem{(HTMLParser method)}
 
-\begin{funcdesc}{anchor_bgn}{href\, name\, type}
+\begin{funcdesc}{anchor_bgn}{href, name, type}
 This method is called at the start of an anchor region.  The arguments
 correspond to the attributes of the \code{<A>} tag with the same
 names.  The default implementation maintains a list of hyperlinks
@@ -100,7 +100,7 @@ implementation adds a textual footnote marker using an index into the
 list of hyperlinks created by \method{anchor_bgn()}.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_image}{source\, alt\optional{\, ismap\optional{\, align\optional{\, width\optional{\, height}}}}}
+\begin{funcdesc}{handle_image}{source, alt\optional{, ismap\optional{, align\optional{, width\optional{, height}}}}}
 This method is called to handle images.  The default implementation
 simply passes the \var{alt} value to the \method{handle_data()}
 method.
diff --git a/Doc/lib/libimageop.tex b/Doc/lib/libimageop.tex
index e5d494d..4a93487 100644
--- a/Doc/lib/libimageop.tex
+++ b/Doc/lib/libimageop.tex
@@ -17,7 +17,7 @@ per pixel, etc.
 \end{excdesc}
 
 
-\begin{funcdesc}{crop}{image\, psize\, width\, height\, x0\, y0\, x1\, y1}
+\begin{funcdesc}{crop}{image, psize, width, height, x0, y0, x1, y1}
 Return the selected part of \var{image}, which should by
 \var{width} by \var{height} in size and consist of pixels of
 \var{psize} bytes. \var{x0}, \var{y0}, \var{x1} and \var{y1} are like
@@ -28,14 +28,14 @@ that fall outside the old image will have their value set to zero.  If
 holds for the y coordinates.
 \end{funcdesc}
 
-\begin{funcdesc}{scale}{image\, psize\, width\, height\, newwidth\, newheight}
+\begin{funcdesc}{scale}{image, psize, width, height, newwidth, newheight}
 Return \var{image} scaled to size \var{newwidth} by \var{newheight}.
 No interpolation is done, scaling is done by simple-minded pixel
 duplication or removal.  Therefore, computer-generated images or
 dithered images will not look nice after scaling.
 \end{funcdesc}
 
-\begin{funcdesc}{tovideo}{image\, psize\, width\, height}
+\begin{funcdesc}{tovideo}{image, psize, width, height}
 Run a vertical low-pass filter over an image.  It does so by computing
 each destination pixel as the average of two vertically-aligned source
 pixels.  The main use of this routine is to forestall excessive
@@ -43,18 +43,18 @@ flicker if the image is displayed on a video device that uses
 interlacing, hence the name.
 \end{funcdesc}
 
-\begin{funcdesc}{grey2mono}{image\, width\, height\, threshold}
+\begin{funcdesc}{grey2mono}{image, width, height, threshold}
 Convert a 8-bit deep greyscale image to a 1-bit deep image by
 tresholding all the pixels.  The resulting image is tightly packed and
 is probably only useful as an argument to \code{mono2grey}.
 \end{funcdesc}
 
-\begin{funcdesc}{dither2mono}{image\, width\, height}
+\begin{funcdesc}{dither2mono}{image, width, height}
 Convert an 8-bit greyscale image to a 1-bit monochrome image using a
 (simple-minded) dithering algorithm.
 \end{funcdesc}
 
-\begin{funcdesc}{mono2grey}{image\, width\, height\, p0\, p1}
+\begin{funcdesc}{mono2grey}{image, width, height, p0, p1}
 Convert a 1-bit monochrome image to an 8 bit greyscale or color image.
 All pixels that are zero-valued on input get value \var{p0} on output
 and all one-value input pixels get value \var{p1} on output.  To
@@ -62,26 +62,26 @@ convert a monochrome black-and-white image to greyscale pass the
 values \code{0} and \code{255} respectively.
 \end{funcdesc}
 
-\begin{funcdesc}{grey2grey4}{image\, width\, height}
+\begin{funcdesc}{grey2grey4}{image, width, height}
 Convert an 8-bit greyscale image to a 4-bit greyscale image without
 dithering.
 \end{funcdesc}
 
-\begin{funcdesc}{grey2grey2}{image\, width\, height}
+\begin{funcdesc}{grey2grey2}{image, width, height}
 Convert an 8-bit greyscale image to a 2-bit greyscale image without
 dithering.
 \end{funcdesc}
 
-\begin{funcdesc}{dither2grey2}{image\, width\, height}
+\begin{funcdesc}{dither2grey2}{image, width, height}
 Convert an 8-bit greyscale image to a 2-bit greyscale image with
 dithering.  As for \code{dither2mono}, the dithering algorithm is
 currently very simple.
 \end{funcdesc}
 
-\begin{funcdesc}{grey42grey}{image\, width\, height}
+\begin{funcdesc}{grey42grey}{image, width, height}
 Convert a 4-bit greyscale image to an 8-bit greyscale image.
 \end{funcdesc}
 
-\begin{funcdesc}{grey22grey}{image\, width\, height}
+\begin{funcdesc}{grey22grey}{image, width, height}
 Convert a 2-bit greyscale image to an 8-bit greyscale image.
 \end{funcdesc}
diff --git a/Doc/lib/libimgfile.tex b/Doc/lib/libimgfile.tex
index 098d59b..8ec31e3 100644
--- a/Doc/lib/libimgfile.tex
+++ b/Doc/lib/libimgfile.tex
@@ -30,7 +30,7 @@ the string. This format is suitable to pass to \code{gl.lrectwrite},
 for instance.
 \end{funcdesc}
 
-\begin{funcdesc}{readscaled}{file\, x\, y\, filter\optional{\, blur}}
+\begin{funcdesc}{readscaled}{file, x, y, filter\optional{, blur}}
 This function is identical to read but it returns an image that is
 scaled to the given \var{x} and \var{y} sizes. If the \var{filter} and
 \var{blur} parameters are omitted scaling is done by
@@ -55,7 +55,7 @@ compatible with SGI GL) or from top to bottom(flag is one,
 compatible with X).  The default is zero.
 \end{funcdesc}
 
-\begin{funcdesc}{write}{file\, data\, x\, y\, z}
+\begin{funcdesc}{write}{file, data, x, y, z}
 This function writes the RGB or greyscale data in \var{data} to image
 file \var{file}. \var{x} and \var{y} give the size of the image,
 \var{z} is 1 for 1 byte greyscale images or 3 for RGB images (which are
diff --git a/Doc/lib/libimp.tex b/Doc/lib/libimp.tex
index 0d0bccc..5664c81 100644
--- a/Doc/lib/libimp.tex
+++ b/Doc/lib/libimp.tex
@@ -188,7 +188,7 @@ shared libraries is highly system dependent, and not all systems
 support it.)
 \end{funcdesc}
 
-\begin{funcdesc}{load_source}{name\, pathname\, file}
+\begin{funcdesc}{load_source}{name, pathname, file}
 Load and initialize a module implemented as a Python source file and
 return its module object.  If the module was already initialized, it
 will be initialized \emph{again}.  The \var{name} argument is used to
diff --git a/Doc/lib/libmailcap.tex b/Doc/lib/libmailcap.tex
index ecc8369..da337bb 100644
--- a/Doc/lib/libmailcap.tex
+++ b/Doc/lib/libmailcap.tex
@@ -17,7 +17,7 @@ Configuration Mechanism For Multimedia Mail Format Information,'' but
 is not an Internet standard.  However, mailcap files are supported on
 most \UNIX{} systems.
 
-\begin{funcdesc}{findmatch}{caps\, MIMEtype\, key\, filename\, plist}
+\begin{funcdesc}{findmatch}{caps, MIMEtype, key, filename, plist}
 Return a 2-tuple; the first element is a string containing the command
 line to be executed
 (which can be passed to \code{os.system()}), and the second element is
diff --git a/Doc/lib/libmimetools.tex b/Doc/lib/libmimetools.tex
index 0ae3af5..0d4e40f 100644
--- a/Doc/lib/libmimetools.tex
+++ b/Doc/lib/libmimetools.tex
@@ -30,18 +30,18 @@ object \var{input} and write the decoded data to open file object
 \code{'base64'}, \code{'quoted-printable'} and \code{'uuencode'}.
 \end{funcdesc}
 
-\begin{funcdesc}{encode}{input\, output\, encoding}
+\begin{funcdesc}{encode}{input, output, encoding}
 Read data from open file object \var{input} and write it encoded using
 the allowed MIME \var{encoding} to open file object \var{output}.
 Valid values for \var{encoding} are the same as for \method{decode()}.
 \end{funcdesc}
 
-\begin{funcdesc}{copyliteral}{input\, output}
+\begin{funcdesc}{copyliteral}{input, output}
 Read lines until \EOF{} from open file \var{input} and write them to
 open file \var{output}.
 \end{funcdesc}
 
-\begin{funcdesc}{copybinary}{input\, output}
+\begin{funcdesc}{copybinary}{input, output}
 Read blocks until \EOF{} from open file \var{input} and write them to
 open file \var{output}.  The block size is currently fixed at 8192.
 \end{funcdesc}
diff --git a/Doc/lib/libminiae.tex b/Doc/lib/libminiae.tex
index 00666fa..d898551 100644
--- a/Doc/lib/libminiae.tex
+++ b/Doc/lib/libminiae.tex
@@ -36,14 +36,14 @@ provide its own windows, etc.
 
 \setindexsubitem{(AEServer method)}
 
-\begin{funcdesc}{installaehandler}{classe\, type\, callback}
+\begin{funcdesc}{installaehandler}{classe, type, callback}
 Installs an AppleEvent handler. \code{Classe} and \code{type} are the
 four-char OSA Class and Type designators, \code{'****'} wildcards are
 allowed. When a matching AppleEvent is received the parameters are
 decoded and your callback is invoked.
 \end{funcdesc}
 
-\begin{funcdesc}{callback}{_object\, **kwargs}
+\begin{funcdesc}{callback}{_object, **kwargs}
 Your callback is called with the OSA Direct Object as first positional
 parameter. The other parameters are passed as keyword arguments, with
 the 4-char designator as name. Three extra keyword parameters are
diff --git a/Doc/lib/libmpz.tex b/Doc/lib/libmpz.tex
index 07b2170..1c4b19f 100644
--- a/Doc/lib/libmpz.tex
+++ b/Doc/lib/libmpz.tex
@@ -37,17 +37,17 @@ A number of \emph{extra} functions are defined in this module. Non
 mpz-arguments are converted to mpz-values first, and the functions
 return mpz-numbers.
 
-\begin{funcdesc}{powm}{base\, exponent\, modulus}
+\begin{funcdesc}{powm}{base, exponent, modulus}
   Return \code{pow(\var{base}, \var{exponent}) \%{} \var{modulus}}. If
   \code{\var{exponent} == 0}, return \code{mpz(1)}. In contrast to the
   \C-library function, this version can handle negative exponents.
 \end{funcdesc}
 
-\begin{funcdesc}{gcd}{op1\, op2}
+\begin{funcdesc}{gcd}{op1, op2}
   Return the greatest common divisor of \var{op1} and \var{op2}.
 \end{funcdesc}
 
-\begin{funcdesc}{gcdext}{a\, b}
+\begin{funcdesc}{gcdext}{a, b}
   Return a tuple \code{(\var{g}, \var{s}, \var{t})}, such that
   \code{\var{a}*\var{s} + \var{b}*\var{t} == \var{g} == gcd(\var{a}, \var{b})}.
 \end{funcdesc}
@@ -61,7 +61,7 @@ return mpz-numbers.
   \code{\var{root}*\var{root} + \var{remainder} == \var{op}}.
 \end{funcdesc}
 
-\begin{funcdesc}{divm}{numerator\, denominator\, modulus}
+\begin{funcdesc}{divm}{numerator, denominator, modulus}
   Returns a number \var{q}. such that
   \code{\var{q} * \var{denominator} \%{} \var{modulus} == \var{numerator}}.
   One could also implement this function in Python, using \code{gcdext}.
diff --git a/Doc/lib/libparser.tex b/Doc/lib/libparser.tex
index cf45b45..ec1bae5 100644
--- a/Doc/lib/libparser.tex
+++ b/Doc/lib/libparser.tex
@@ -153,7 +153,7 @@ converted to parse trees represented as list- or tuple- trees, or may
 be compiled into executable code objects.  Parse trees may be
 extracted with or without line numbering information.
 
-\begin{funcdesc}{ast2list}{ast\optional{\, line_info\code{ = 0}}}
+\begin{funcdesc}{ast2list}{ast\optional{, line_info\code{ = 0}}}
 This function accepts an AST object from the caller in
 \code{\var{ast}} and returns a Python list representing the
 equivelent parse tree.  The resulting list representation can be used
@@ -172,7 +172,7 @@ the line on which the token \emph{ends}.  This information is
 omitted if the flag is false or omitted.
 \end{funcdesc}
 
-\begin{funcdesc}{ast2tuple}{ast\optional{\, line_info\code{ = 0}}}
+\begin{funcdesc}{ast2tuple}{ast\optional{, line_info\code{ = 0}}}
 This function accepts an AST object from the caller in
 \code{\var{ast}} and returns a Python tuple representing the
 equivelent parse tree.  Other than returning a tuple instead of a
@@ -184,7 +184,7 @@ representing the token.  This information is omitted if the flag is
 false or omitted.
 \end{funcdesc}
 
-\begin{funcdesc}{compileast}{ast\optional{\, filename\code{ = '<ast>'}}}
+\begin{funcdesc}{compileast}{ast\optional{, filename\code{ = '<ast>'}}}
 The Python byte compiler can be invoked on an AST object to produce
 code objects which can be used as part of an \code{exec} statement or
 a call to the built-in \function{eval()}\bifuncindex{eval} function.
diff --git a/Doc/lib/libpdb.tex b/Doc/lib/libpdb.tex
index 5cfada5..4fe8ad1 100644
--- a/Doc/lib/libpdb.tex
+++ b/Doc/lib/libpdb.tex
@@ -69,7 +69,7 @@ NameError: spam
 The module defines the following functions; each enters the debugger
 in a slightly different way:
 
-\begin{funcdesc}{run}{statement\optional{\, globals\optional{\, locals}}}
+\begin{funcdesc}{run}{statement\optional{, globals\optional{, locals}}}
 Execute the \var{statement} (given as a string) under debugger
 control.  The debugger prompt appears before any code is executed; you
 can set breakpoints and type \code{continue}, or you can step through
@@ -81,14 +81,14 @@ the explanation of the \code{exec} statement or the \code{eval()}
 built-in function.)
 \end{funcdesc}
 
-\begin{funcdesc}{runeval}{expression\optional{\, globals\optional{\, locals}}}
+\begin{funcdesc}{runeval}{expression\optional{, globals\optional{, locals}}}
 Evaluate the \var{expression} (given as a a string) under debugger
 control.  When \code{runeval()} returns, it returns the value of the
 expression.  Otherwise this function is similar to
 \code{run()}.
 \end{funcdesc}
 
-\begin{funcdesc}{runcall}{function\optional{\, argument\, ...}}
+\begin{funcdesc}{runcall}{function\optional{, argument, ...}}
 Call the \var{function} (a function or method object, not a string)
 with the given arguments.  When \code{runcall()} returns, it returns
 whatever the function call returned.  The debugger prompt appears as
diff --git a/Doc/lib/libpickle.tex b/Doc/lib/libpickle.tex
index e2dab0a..d508e5b 100644
--- a/Doc/lib/libpickle.tex
+++ b/Doc/lib/libpickle.tex
@@ -229,7 +229,7 @@ Collection may also become a problem here.)
 Apart from the \code{Pickler} and \code{Unpickler} classes, the
 module defines the following functions, and an exception:
 
-\begin{funcdesc}{dump}{object\, file\optional{, bin}}
+\begin{funcdesc}{dump}{object, file\optional{, bin}}
 Write a pickled representation of \var{obect} to the open file object
 \var{file}.  This is equivalent to
 \code{Pickler(\var{file}, \var{bin}).dump(\var{object})}.
diff --git a/Doc/lib/libposix.tex b/Doc/lib/libposix.tex
index 454c652..101938d 100644
--- a/Doc/lib/libposix.tex
+++ b/Doc/lib/libposix.tex
@@ -79,11 +79,11 @@ It defines the following functions and constants:
 Change the current working directory to \var{path}.
 \end{funcdesc}
 
-\begin{funcdesc}{chmod}{path\, mode}
+\begin{funcdesc}{chmod}{path, mode}
 Change the mode of \var{path} to the numeric \var{mode}.
 \end{funcdesc}
 
-\begin{funcdesc}{chown}{path\, uid, gid}
+\begin{funcdesc}{chown}{path, uid, gid}
 Change the owner and group id of \var{path} to the numeric \var{uid}
 and \var{gid}.
 (Not on MS-DOS.)
@@ -103,19 +103,19 @@ built-in function \function{open()} or by \function{popen()} or
 Return a duplicate of file descriptor \var{fd}.
 \end{funcdesc}
 
-\begin{funcdesc}{dup2}{fd\, fd2}
+\begin{funcdesc}{dup2}{fd, fd2}
 Duplicate file descriptor \var{fd} to \var{fd2}, closing the latter
 first if necessary.
 \end{funcdesc}
 
-\begin{funcdesc}{execv}{path\, args}
+\begin{funcdesc}{execv}{path, args}
 Execute the executable \var{path} with argument list \var{args},
 replacing the current process (i.e., the Python interpreter).
 The argument list may be a tuple or list of strings.
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{execve}{path\, args\, env}
+\begin{funcdesc}{execve}{path, args, env}
 Execute the executable \var{path} with argument list \var{args},
 and environment \var{env},
 replacing the current process (i.e., the Python interpreter).
@@ -134,7 +134,7 @@ Note: the standard way to exit is \code{sys.exit(\var{n})}.
 after a \function{fork()}.
 \end{funcdesc}
 
-\begin{funcdesc}{fdopen}{fd\optional{\, mode\optional{\, bufsize}}}
+\begin{funcdesc}{fdopen}{fd\optional{, mode\optional{, bufsize}}}
 Return an open file object connected to the file descriptor \var{fd}.
 The \var{mode} and \var{bufsize} arguments have the same meaning as
 the corresponding arguments to the built-in \function{open()} function.
@@ -150,7 +150,7 @@ process id in the parent.
 Return status for file descriptor \var{fd}, like \function{stat()}.
 \end{funcdesc}
 
-\begin{funcdesc}{ftruncate}{fd\, length}
+\begin{funcdesc}{ftruncate}{fd, length}
 Truncate the file corresponding to file descriptor \var{fd}, 
 so that it is at most \var{length} bytes in size.
 \end{funcdesc}
@@ -194,12 +194,12 @@ Return the current process' user id.
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{kill}{pid\, sig}
+\begin{funcdesc}{kill}{pid, sig}
 Kill the process \var{pid} with signal \var{sig}.
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{link}{src\, dst}
+\begin{funcdesc}{link}{src, dst}
 Create a hard link pointing to \var{src} named \var{dst}.
 (Not on MS-DOS.)
 \end{funcdesc}
@@ -211,7 +211,7 @@ entries \code{'.'} and \code{'..'} even if they are present in the
 directory.
 \end{funcdesc}
 
-\begin{funcdesc}{lseek}{fd\, pos\, how}
+\begin{funcdesc}{lseek}{fd, pos, how}
 Set the current position of file descriptor \var{fd} to position
 \var{pos}, modified by \var{how}: \code{0} to set the position
 relative to the beginning of the file; \code{1} to set it relative to
@@ -224,7 +224,7 @@ Like \function{stat()}, but do not follow symbolic links.  (On systems
 without symbolic links, this is identical to \function{stat()}.)
 \end{funcdesc}
 
-\begin{funcdesc}{mkfifo}{path\optional{\, mode}}
+\begin{funcdesc}{mkfifo}{path\optional{, mode}}
 Create a FIFO (a \POSIX{} named pipe) named \var{path} with numeric mode
 \var{mode}.  The default \var{mode} is \code{0666} (octal).  The current
 umask value is first masked out from the mode.
@@ -238,7 +238,7 @@ the client opens it for writing.  Note that \function{mkfifo()}
 doesn't open the FIFO --- it just creates the rendezvous point.
 \end{funcdesc}
 
-\begin{funcdesc}{mkdir}{path\optional{\, mode}}
+\begin{funcdesc}{mkdir}{path\optional{, mode}}
 Create a directory named \var{path} with numeric mode \var{mode}.
 The default \var{mode} is \code{0777} (octal).  On some systems,
 \var{mode} is ignored.  Where it is used, the current umask value is
@@ -250,7 +250,7 @@ Add \var{increment} to the process' ``niceness''.  Return the new
 niceness.  (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{open}{file\, flags\optional{\, mode}}
+\begin{funcdesc}{open}{file, flags\optional{, mode}}
 Open the file \var{file} and set various flags according to
 \var{flags} and possibly its mode according to \var{mode}.
 The default \var{mode} is \code{0777} (octal), and the current umask
@@ -279,7 +279,7 @@ Lock program segments into memory.  The value of \var{op}
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{popen}{command\optional{\, mode\optional{\, bufsize}}}
+\begin{funcdesc}{popen}{command\optional{, mode\optional{, bufsize}}}
 Open a pipe to or from \var{command}.  The return value is an open
 file object connected to the pipe, which can be read or written
 depending on whether \var{mode} is \code{'r'} (default) or \code{'w'}.
@@ -291,7 +291,7 @@ object.
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{putenv}{varname\, value}
+\begin{funcdesc}{putenv}{varname, value}
 \index{environment variables!setting}
 Set the environment variable named \var{varname} to the string
 \var{value}.  Such changes to the environment affect subprocesses
@@ -309,7 +309,7 @@ actually preferable to assign to items of \code{os.environ}.
 Return the error message corresponding to the error code in \var{code}.
 \end{funcdesc}
 
-\begin{funcdesc}{read}{fd\, n}
+\begin{funcdesc}{read}{fd, n}
 Read at most \var{n} bytes from file descriptor \var{fd}.
 Return a string containing the bytes read.
 
@@ -333,7 +333,7 @@ directory.  This is identical to the \function{unlink()} function
 documented below.
 \end{funcdesc}
 
-\begin{funcdesc}{rename}{src\, dst}
+\begin{funcdesc}{rename}{src, dst}
 Rename the file or directory \var{src} to \var{dst}.
 \end{funcdesc}
 
@@ -353,7 +353,7 @@ Calls the system call \cfunction{setpgrp()} or \cfunction{setpgrp(0,
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{setpgid}{pid\, pgrp}
+\begin{funcdesc}{setpgid}{pid, pgrp}
 Calls the system call \cfunction{setpgid()}.  See the \UNIX{} manual
 for the semantics.
 (Not on MS-DOS.)
@@ -393,7 +393,7 @@ functions and constants that are useful for extracting information
 from a stat structure.
 \end{funcdesc}
 
-\begin{funcdesc}{symlink}{src\, dst}
+\begin{funcdesc}{symlink}{src, dst}
 Create a symbolic link pointing to \var{src} named \var{dst}.  (On
 systems without symbolic links, this always raises \exception{error}.)
 \end{funcdesc}
@@ -413,7 +413,7 @@ Return the process group associated with the terminal given by
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{tcsetpgrp}{fd\, pg}
+\begin{funcdesc}{tcsetpgrp}{fd, pg}
 Set the process group associated with the terminal given by
 \var{fd} (an open file descriptor as returned by \function{open()})
 to \var{pg}.
@@ -453,7 +453,7 @@ Remove the file \var{path}.  This is the same function as \code{remove};
 the \code{unlink} name is its traditional \UNIX{} name.
 \end{funcdesc}
 
-\begin{funcdesc}{utime}{path\, {\rm (}atime, mtime{\rm )}}
+\begin{funcdesc}{utime}{path, {\rm (}atime, mtime{\rm )}}
 Set the access and modified time of the file to the given values.
 (The second argument is a tuple of two items.)
 \end{funcdesc}
@@ -466,7 +466,7 @@ exit status (if the signal number is zero); the high bit of the low
 byte is set if a core file was produced.  (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{waitpid}{pid\, options}
+\begin{funcdesc}{waitpid}{pid, options}
 Wait for completion of a child process given by proces id, and return
 a tuple containing its pid and exit status indication (encoded as for
 \function{wait()}).  The semantics of the call are affected by the
@@ -476,7 +476,7 @@ normal operation.  (If the system does not support
 MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{write}{fd\, str}
+\begin{funcdesc}{write}{fd, str}
 Write the string \var{str} to file descriptor \var{fd}.
 Return the number of bytes actually written.
 
diff --git a/Doc/lib/libppath.tex b/Doc/lib/libppath.tex
index f1d17d6..6639c7c 100644
--- a/Doc/lib/libppath.tex
+++ b/Doc/lib/libppath.tex
@@ -80,7 +80,7 @@ different device than \var{p}, or whether \file{\var{p}/..} and
 detect mount points for all \UNIX{} and \POSIX{} variants.
 \end{funcdesc}
 
-\begin{funcdesc}{join}{p\optional{\, q\optional{\, ...}}}
+\begin{funcdesc}{join}{p\optional{, q\optional{, ...}}}
 Joins one or more path components intelligently.  If any component is
 an absolute path, all previous components are thrown away, and joining
 continues.  The return value is the concatenation of \var{p}, and
@@ -103,7 +103,7 @@ case (use \function{normcase()} for that).  On Windows, it does
 converts forward slashes to backward slashes.
 \end{funcdesc}
 
-\begin{funcdesc}{samefile}{p\, q}
+\begin{funcdesc}{samefile}{p, q}
 Return true if both pathname arguments refer to the same file or
 directory (as indicated by device number and i-node number).
 Raise an exception if a \function{os.stat()} call on either pathname
@@ -130,7 +130,7 @@ and \var{ext} is empty or begins with a period and contains
 at most one period.
 \end{funcdesc}
 
-\begin{funcdesc}{walk}{p\, visit\, arg}
+\begin{funcdesc}{walk}{p, visit, arg}
 Calls the function \var{visit} with arguments
 \code{(\var{arg}, \var{dirname}, \var{names})} for each directory in the
 directory tree rooted at \var{p} (including \var{p} itself, if it is a
diff --git a/Doc/lib/libprofile.tex b/Doc/lib/libprofile.tex
index a8b2099..3fa79df 100644
--- a/Doc/lib/libprofile.tex
+++ b/Doc/lib/libprofile.tex
@@ -269,7 +269,7 @@ Profiler Extensions, which includes discussion of how to derive
 ``better'' profilers from the classes presented, or reading the source
 code for these modules.
 
-\begin{funcdesc}{profile.run}{string\optional{\, filename\optional{\, ...}}}
+\begin{funcdesc}{profile.run}{string\optional{, filename\optional{, ...}}}
 
 This function takes a single argument that has can be passed to the
 \keyword{exec} statement, and an optional file name.  In all cases this
@@ -338,7 +338,7 @@ Analysis of the profiler data is done using this class from the
 
 \setindexsubitem{(in module pstats)}
 
-\begin{classdesc}{Stats}{filename\optional{\, ...}}
+\begin{classdesc}{Stats}{filename\optional{, ...}}
 This class constructor creates an instance of a ``statistics object''
 from a \var{filename} (or set of filenames).  \class{Stats} objects are
 manipulated by methods, in order to print useful reports.
@@ -375,7 +375,7 @@ statistics for these two entries are accumulated into a single entry.
 \end{funcdesc}
 
 
-\begin{funcdesc}{add}{filename\optional{\, ...}}
+\begin{funcdesc}{add}{filename\optional{, ...}}
 This method of the \class{Stats} class accumulates additional
 profiling information into the current profiling object.  Its
 arguments should refer to filenames created by the corresponding
@@ -384,7 +384,7 @@ version of \function{profile.run()}.  Statistics for identically named
 single function statistics.
 \end{funcdesc}
 
-\begin{funcdesc}{sort_stats}{key\optional{\, ...}}
+\begin{funcdesc}{sort_stats}{key\optional{, ...}}
 This method modifies the \class{Stats} object by sorting it according
 to the supplied criteria.  The argument is typically a string
 identifying the basis of a sort (example: \code{"time"} or
@@ -441,7 +441,7 @@ now that ascending vs descending order is properly selected based on
 the sort key of choice.
 \end{funcdesc}
 
-\begin{funcdesc}{print_stats}{restriction\optional{\, ...}}
+\begin{funcdesc}{print_stats}{restriction\optional{, ...}}
 This method for the \class{Stats} class prints out a report as described
 in the \function{profile.run()} definition.
 
@@ -476,7 +476,7 @@ and then proceed to only print the first 10\% of them.
 \end{funcdesc}
 
 
-\begin{funcdesc}{print_callers}{restrictions\optional{\, ...}}
+\begin{funcdesc}{print_callers}{restrictions\optional{, ...}}
 This method for the \class{Stats} class prints a list of all functions
 that called each function in the profiled database.  The ordering is
 identical to that provided by \method{print_stats()}, and the definition
@@ -486,7 +486,7 @@ times this specific call was made.  A second non-parenthesized number
 is the cumulative time spent in the function at the right.
 \end{funcdesc}
 
-\begin{funcdesc}{print_callees}{restrictions\optional{\, ...}}
+\begin{funcdesc}{print_callees}{restrictions\optional{, ...}}
 This method for the \class{Stats} class prints a list of all function
 that were called by the indicated function.  Aside from this reversal
 of direction of calls (re: called vs was called by), the arguments and
diff --git a/Doc/lib/libquopri.tex b/Doc/lib/libquopri.tex
index 4ad0c0f..e379e4a 100644
--- a/Doc/lib/libquopri.tex
+++ b/Doc/lib/libquopri.tex
@@ -13,7 +13,7 @@ are many such characters, as when sending a graphics file.
 
 \setindexsubitem{(in module quopri)}
 
-\begin{funcdesc}{decode}{input\, output}
+\begin{funcdesc}{decode}{input, output}
 Decode the contents of the \var{input} file and write the resulting
 decoded binary data to the \var{output} file.
 \var{input} and \var{output} must either be file objects or objects that
@@ -21,7 +21,7 @@ mimic the file object interface. \var{input} will be read until
 \code{\var{input}.read()} returns an empty string.
 \end{funcdesc}
 
-\begin{funcdesc}{encode}{input\, output\, quotetabs}
+\begin{funcdesc}{encode}{input, output, quotetabs}
 Encode the contents of the \var{input} file and write the resulting
 quoted-printable data to the \var{output} file.
 \var{input} and \var{output} must either be file objects or objects that
diff --git a/Doc/lib/libregex.tex b/Doc/lib/libregex.tex
index f427a88..e3de911 100644
--- a/Doc/lib/libregex.tex
+++ b/Doc/lib/libregex.tex
@@ -192,21 +192,21 @@ The module defines these functions, and an exception:
 
 \setindexsubitem{(in module regex)}
 
-\begin{funcdesc}{match}{pattern\, string}
+\begin{funcdesc}{match}{pattern, string}
   Return how many characters at the beginning of \var{string} match
   the regular expression \var{pattern}.  Return \code{-1} if the
   string does not match the pattern (this is different from a
   zero-length match!).
 \end{funcdesc}
 
-\begin{funcdesc}{search}{pattern\, string}
+\begin{funcdesc}{search}{pattern, string}
   Return the first position in \var{string} that matches the regular
   expression \var{pattern}.  Return \code{-1} if no position in the string
   matches the pattern (this is different from a zero-length match
   anywhere!).
 \end{funcdesc}
 
-\begin{funcdesc}{compile}{pattern\optional{\, translate}}
+\begin{funcdesc}{compile}{pattern\optional{, translate}}
   Compile a regular expression pattern into a regular expression
   object, which can be used for matching using its \code{match()} and
   \code{search()} methods, described below.  The optional argument
@@ -252,7 +252,7 @@ expressions.)
   Returns the current value of the syntax flags as an integer.
 \end{funcdesc}
 
-\begin{funcdesc}{symcomp}{pattern\optional{\, translate}}
+\begin{funcdesc}{symcomp}{pattern\optional{, translate}}
 This is like \code{compile()}, but supports symbolic group names: if a
 parenthesis-enclosed group begins with a group name in angular
 brackets, e.g. \code{'\e(<id>[a-z][a-z0-9]*\e)'}, the group can
@@ -279,7 +279,7 @@ equivalents.
 Compiled regular expression objects support these methods:
 
 \setindexsubitem{(regex method)}
-\begin{funcdesc}{match}{string\optional{\, pos}}
+\begin{funcdesc}{match}{string\optional{, pos}}
   Return how many characters at the beginning of \var{string} match
   the compiled regular expression.  Return \code{-1} if the string
   does not match the pattern (this is different from a zero-length
@@ -293,7 +293,7 @@ Compiled regular expression objects support these methods:
   is to start.
 \end{funcdesc}
 
-\begin{funcdesc}{search}{string\optional{\, pos}}
+\begin{funcdesc}{search}{string\optional{, pos}}
   Return the first position in \var{string} that matches the regular
   expression \code{pattern}.  Return \code{-1} if no position in the
   string matches the pattern (this is different from a zero-length
@@ -303,7 +303,7 @@ Compiled regular expression objects support these methods:
   \code{match()} method.
 \end{funcdesc}
 
-\begin{funcdesc}{group}{index\, index\, ...}
+\begin{funcdesc}{group}{index, index, ...}
 This method is only valid when the last call to the \code{match()}
 or \code{search()} method found a match.  It returns one or more
 groups of the match.  If there is a single \var{index} argument,
diff --git a/Doc/lib/libregsub.tex b/Doc/lib/libregsub.tex
index 08b990e..b4d3862 100644
--- a/Doc/lib/libregsub.tex
+++ b/Doc/lib/libregsub.tex
@@ -20,7 +20,7 @@ conversion help, see the URL
 
 \setindexsubitem{(in module regsub)}
 
-\begin{funcdesc}{sub}{pat\, repl\, str}
+\begin{funcdesc}{sub}{pat, repl, str}
 Replace the first occurrence of pattern \var{pat} in string
 \var{str} by replacement \var{repl}.  If the pattern isn't found,
 the string is returned unchanged.  The pattern may be a string or an
@@ -28,7 +28,7 @@ already compiled pattern.  The replacement may contain references
 \samp{\e \var{digit}} to subpatterns and escaped backslashes.
 \end{funcdesc}
 
-\begin{funcdesc}{gsub}{pat\, repl\, str}
+\begin{funcdesc}{gsub}{pat, repl, str}
 Replace all (non-overlapping) occurrences of pattern \var{pat} in
 string \var{str} by replacement \var{repl}.  The same rules as for
 \code{sub()} apply.  Empty matches for the pattern are replaced only
@@ -36,7 +36,7 @@ when not adjacent to a previous match, so e.g.
 \code{gsub('', '-', 'abc')} returns \code{'-a-b-c-'}.
 \end{funcdesc}
 
-\begin{funcdesc}{split}{str\, pat\optional{\, maxsplit}}
+\begin{funcdesc}{split}{str, pat\optional{, maxsplit}}
 Split the string \var{str} in fields separated by delimiters matching
 the pattern \var{pat}, and return a list containing the fields.  Only
 non-empty matches for the pattern are considered, so e.g.
@@ -47,7 +47,7 @@ occur, and the remainder of the string is returned as the final
 element of the list.
 \end{funcdesc}
 
-\begin{funcdesc}{splitx}{str\, pat\optional{\, maxsplit}}
+\begin{funcdesc}{splitx}{str, pat\optional{, maxsplit}}
 Split the string \var{str} in fields separated by delimiters matching
 the pattern \var{pat}, and return a list containing the fields as well
 as the separators.  For example, \code{splitx('a:::b', ':*')} returns
@@ -55,7 +55,7 @@ as the separators.  For example, \code{splitx('a:::b', ':*')} returns
 as \code{split}.
 \end{funcdesc}
 
-\begin{funcdesc}{capwords}{s\optional{\, pat}}
+\begin{funcdesc}{capwords}{s\optional{, pat}}
 Capitalize words separated by optional pattern \var{pat}.  The default
 pattern uses any characters except letters, digits and underscores as
 word delimiters.  Capitalization is done by changing the first
diff --git a/Doc/lib/librexec.tex b/Doc/lib/librexec.tex
index 626edd3..e301f81 100644
--- a/Doc/lib/librexec.tex
+++ b/Doc/lib/librexec.tex
@@ -151,7 +151,7 @@ Import the module \var{modulename}, raising an \exception{ImportError}
 exception if the module is considered unsafe.
 \end{funcdesc}
 
-\begin{funcdesc}{r_open}{filename\optional{\, mode\optional{\, bufsize}}}
+\begin{funcdesc}{r_open}{filename\optional{, mode\optional{, bufsize}}}
 Method called when \function{open()} is called in the restricted
 environment.  The arguments are identical to those of \function{open()},
 and a file object (or a class instance compatible with file objects)
@@ -172,7 +172,7 @@ restricted environment's \code{sys.modules} dictionary).
 
 And their equivalents with access to restricted standard I/O streams:
 
-\begin{funcdesc}{s_import}{modulename\optional{\, globals, locals, fromlist}}
+\begin{funcdesc}{s_import}{modulename\optional{, globals, locals, fromlist}}
 Import the module \var{modulename}, raising an \exception{ImportError}
 exception if the module is considered unsafe.
 \end{funcdesc}
diff --git a/Doc/lib/librgbimg.tex b/Doc/lib/librgbimg.tex
index 9432d2e..cb11554 100644
--- a/Doc/lib/librgbimg.tex
+++ b/Doc/lib/librgbimg.tex
@@ -29,7 +29,7 @@ the string. This format is suitable to pass to \code{gl.lrectwrite},
 for instance.
 \end{funcdesc}
 
-\begin{funcdesc}{longstoimage}{data\, x\, y\, z\, file}
+\begin{funcdesc}{longstoimage}{data, x, y, z, file}
 This function writes the RGBA data in \var{data} to image
 file \var{file}. \var{x} and \var{y} give the size of the image.
 \var{z} is 1 if the saved image should be 1 byte greyscale, 3 if the
diff --git a/Doc/lib/librotor.tex b/Doc/lib/librotor.tex
index 488a49f..e467d4e 100644
--- a/Doc/lib/librotor.tex
+++ b/Doc/lib/librotor.tex
@@ -25,7 +25,7 @@ order.
 The available functions in this module are:
 
 \setindexsubitem{(in module rotor)}
-\begin{funcdesc}{newrotor}{key\optional{\, numrotors}}
+\begin{funcdesc}{newrotor}{key\optional{, numrotors}}
 Return a rotor object. \var{key} is a string containing the encryption key
 for the object; it can contain arbitrary binary data. The key will be used
 to randomly generate the rotor permutations and their initial positions.
diff --git a/Doc/lib/libselect.tex b/Doc/lib/libselect.tex
index 956bf7f..5a800f5 100644
--- a/Doc/lib/libselect.tex
+++ b/Doc/lib/libselect.tex
@@ -13,7 +13,7 @@ corresponding string, as would be printed by the C function
 \code{perror()}.
 \end{excdesc}
 
-\begin{funcdesc}{select}{iwtd\, owtd\, ewtd\optional{\, timeout}}
+\begin{funcdesc}{select}{iwtd, owtd, ewtd\optional{, timeout}}
 This is a straightforward interface to the \UNIX{} \code{select()}
 system call.  The first three arguments are lists of `waitable
 objects': either integers representing \UNIX{} file descriptors or
diff --git a/Doc/lib/libsgmllib.tex b/Doc/lib/libsgmllib.tex
index 78060ec..f93095b 100644
--- a/Doc/lib/libsgmllib.tex
+++ b/Doc/lib/libsgmllib.tex
@@ -140,7 +140,7 @@ This method is called when an end tag is found which does not
 correspond to any open element.
 \end{funcdesc}
 
-\begin{funcdesc}{unknown_starttag}{tag\, attributes}
+\begin{funcdesc}{unknown_starttag}{tag, attributes}
 This method is called to process an unknown start tag.  It is intended
 to be overridden by a derived class; the base class implementation
 does nothing.
diff --git a/Doc/lib/libsignal.tex b/Doc/lib/libsignal.tex
index 39286a7..fd74cf8 100644
--- a/Doc/lib/libsignal.tex
+++ b/Doc/lib/libsignal.tex
@@ -124,7 +124,7 @@ The \module{signal} module defines the following functions:
   \UNIX{} man page \manpage{signal}{2}.)
 \end{funcdesc}
 
-\begin{funcdesc}{signal}{signalnum\, handler}
+\begin{funcdesc}{signal}{signalnum, handler}
   Set the handler for signal \var{signalnum} to the function
   \var{handler}.  \var{handler} can be any callable Python object, or
   one of the special values \constant{signal.SIG_IGN} or
diff --git a/Doc/lib/libsocket.tex b/Doc/lib/libsocket.tex
index 913bb8f..aff99d4 100644
--- a/Doc/lib/libsocket.tex
+++ b/Doc/lib/libsocket.tex
@@ -260,7 +260,7 @@ specifies the maximum number of queued connections and should be at
 least 1; the maximum value is system-dependent (usually 5).
 \end{funcdesc}
 
-\begin{funcdesc}{makefile}{\optional{mode\optional{\, bufsize}}}
+\begin{funcdesc}{makefile}{\optional{mode\optional{, bufsize}}}
 Return a \dfn{file object} associated with the socket.  (File objects
 were described earlier in \ref{bltin-file-objects}, ``File Objects.'')
 The file object references a \cfunction{dup()}ped version of the
@@ -293,7 +293,7 @@ socket.  The optional \var{flags} argument has the same meaning as for
 \method{recv()} above.  Returns the number of bytes sent.
 \end{funcdesc}
 
-\begin{funcdesc}{sendto}{string\optional{\, flags}\, address}
+\begin{funcdesc}{sendto}{string\optional{, flags}, address}
 Send data to the socket.  The socket should not be connected to a
 remote socket, since the destination socket is specified by
 \var{address}.  The optional \var{flags} argument has the same
@@ -310,7 +310,7 @@ immediately dispose of the data, a \exception{error} exception is
 raised; in blocking mode, the calls block until they can proceed.
 \end{funcdesc}
 
-\begin{funcdesc}{setsockopt}{level\, optname\, value}
+\begin{funcdesc}{setsockopt}{level, optname, value}
 Set the value of the given socket option (see the \UNIX{} man page
 \manpage{setsockopt}{2}).  The needed symbolic constants are defined in
 the \module{socket} module (\code{SO_*} etc.).  The value can be an
diff --git a/Doc/lib/libsocksvr.tex b/Doc/lib/libsocksvr.tex
index ea1b703..2ee36a4 100644
--- a/Doc/lib/libsocksvr.tex
+++ b/Doc/lib/libsocksvr.tex
@@ -123,14 +123,14 @@ the \emph{new} socket object to be used to communicate with the
 client, and the client's address.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_error}{request\, client_address}
+\begin{funcdesc}{handle_error}{request, client_address}
 This function is called if the \member{RequestHandlerClass}'s
 \method{handle()} method raises an exception.  The default action is
 to print the traceback to standard output and continue handling
 further requests.
 \end{funcdesc}
 
-\begin{funcdesc}{process_request}{request\, client_address}
+\begin{funcdesc}{process_request}{request, client_address}
 Calls \method{finish_request()} to create an instance of the
 \member{RequestHandlerClass}.  If desired, this function can create a
 new process or thread to handle the request; the \class{ForkingMixIn}
@@ -151,7 +151,7 @@ Called by the server's constructor to bind the socket to the desired
 address.  May be overridden.
 \end{funcdesc}
 
-\begin{funcdesc}{verify_request}{request\, client_address}
+\begin{funcdesc}{verify_request}{request, client_address}
 Must return a Boolean value; if the value is true, the request will be
 processed, and if it's false, the request will be denied.
 This function can be overridden to implement access controls for a server.
diff --git a/Doc/lib/libstdwin.tex b/Doc/lib/libstdwin.tex
index b16fde6..35ff6a7 100644
--- a/Doc/lib/libstdwin.tex
+++ b/Doc/lib/libstdwin.tex
@@ -80,16 +80,16 @@ matches any single character.
 On the Macintosh this function currently returns an empty list.
 \end{funcdesc}
 
-\begin{funcdesc}{setdefscrollbars}{hflag\, vflag}
+\begin{funcdesc}{setdefscrollbars}{hflag, vflag}
 Set the flags controlling whether subsequently opened windows will
 have horizontal and/or vertical scroll bars.
 \end{funcdesc}
 
-\begin{funcdesc}{setdefwinpos}{h\, v}
+\begin{funcdesc}{setdefwinpos}{h, v}
 Set the default window position for windows opened subsequently.
 \end{funcdesc}
 
-\begin{funcdesc}{setdefwinsize}{width\, height}
+\begin{funcdesc}{setdefwinsize}{width, height}
 Set the default window size for windows opened subsequently.
 \end{funcdesc}
 
@@ -176,7 +176,7 @@ Note: normally, menus are created locally; see the window method
 returned by this call exists.
 \end{funcdesc}
 
-\begin{funcdesc}{newbitmap}{width\, height}
+\begin{funcdesc}{newbitmap}{width, height}
 Create a new bitmap object of the given dimensions.
 Methods of bitmap objects are described below.
 Not available on the Macintosh.
@@ -192,7 +192,7 @@ Display a dialog box containing the string.
 The user must click OK before the function returns.
 \end{funcdesc}
 
-\begin{funcdesc}{askync}{prompt\, default}
+\begin{funcdesc}{askync}{prompt, default}
 Display a dialog that prompts the user to answer a question with yes or
 no.
 Return 0 for no, 1 for yes.
@@ -203,7 +203,7 @@ If the user cancels the dialog, the
 exception is raised.
 \end{funcdesc}
 
-\begin{funcdesc}{askstr}{prompt\, default}
+\begin{funcdesc}{askstr}{prompt, default}
 Display a dialog that prompts the user for a string.
 If the user hits the Return key, the default string is returned.
 If the user cancels the dialog, the
@@ -211,7 +211,7 @@ If the user cancels the dialog, the
 exception is raised.
 \end{funcdesc}
 
-\begin{funcdesc}{askfile}{prompt\, default\, new}
+\begin{funcdesc}{askfile}{prompt, default, new}
 Ask the user to specify a filename.
 If
 \var{new}
@@ -221,7 +221,7 @@ If the user cancels the dialog, the
 exception is raised.
 \end{funcdesc}
 
-\begin{funcdesc}{setcutbuffer}{i\, string}
+\begin{funcdesc}{setcutbuffer}{i, string}
 Store the string in the system's cut buffer number
 \var{i},
 where it can be found (for pasting) by other applications.
@@ -278,7 +278,7 @@ characters).
 Return the total line height of the current font.
 \end{funcdesc}
 
-\begin{funcdesc}{textbreak}{str\, width}
+\begin{funcdesc}{textbreak}{str, width}
 Return the number of characters of the string that fit into a space of
 \var{width}
 bits wide when drawn in the curent font.
@@ -365,7 +365,7 @@ Methods of menu objects are described below.
 returned by this call exists.
 \end{funcdesc}
 
-\begin{funcdesc}{scroll}{rect\, point}
+\begin{funcdesc}{scroll}{rect, point}
 Scroll the given rectangle by the vector given by the point.
 \end{funcdesc}
 
@@ -378,7 +378,7 @@ Move the origin of the window (its upper left corner)
 to the given point in the document.
 \end{funcdesc}
 
-\begin{funcdesc}{setselection}{i\, str}
+\begin{funcdesc}{setselection}{i, str}
 Attempt to set X11 selection number
 \var{i}
 to the string
@@ -428,12 +428,12 @@ On X11, there are many more (see
 \end{sloppypar}
 \end{funcdesc}
 
-\begin{funcdesc}{setwinpos}{h\, v}
+\begin{funcdesc}{setwinpos}{h, v}
 Set the the position of the window's upper left corner (relative to
 the upper left corner of the screen).
 \end{funcdesc}
 
-\begin{funcdesc}{setwinsize}{width\, height}
+\begin{funcdesc}{setwinsize}{width, height}
 Set the window's size.
 \end{funcdesc}
 
@@ -474,11 +474,11 @@ Drawing objects have the following methods:
 Draw a box just inside a rectangle.
 \end{funcdesc}
 
-\begin{funcdesc}{circle}{center\, radius}
+\begin{funcdesc}{circle}{center, radius}
 Draw a circle with given center point and radius.
 \end{funcdesc}
 
-\begin{funcdesc}{elarc}{center\, \(rh\, rv\)\, \(a1\, a2\)}
+\begin{funcdesc}{elarc}{center, \(rh, rv\), \(a1, a2\)}
 Draw an elliptical arc with given center point.
 \code{(\var{rh}, \var{rv})}
 gives the half sizes of the horizontal and vertical radii.
@@ -491,11 +491,11 @@ gives the angles (in degrees) of the begin and end points.
 Erase a rectangle.
 \end{funcdesc}
 
-\begin{funcdesc}{fillcircle}{center\, radius}
+\begin{funcdesc}{fillcircle}{center, radius}
 Draw a filled circle with given center point and radius.
 \end{funcdesc}
 
-\begin{funcdesc}{fillelarc}{center\, \(rh\, rv\)\, \(a1\, a2\)}
+\begin{funcdesc}{fillelarc}{center, \(rh, rv\), \(a1, a2\)}
 Draw a filled elliptical arc; arguments as for \code{elarc}.
 \end{funcdesc}
 
@@ -507,7 +507,7 @@ Draw a filled polygon given by a list (or tuple) of points.
 Invert a rectangle.
 \end{funcdesc}
 
-\begin{funcdesc}{line}{p1\, p2}
+\begin{funcdesc}{line}{p1, p2}
 Draw a line from point
 \var{p1}
 to
@@ -522,20 +522,20 @@ Fill a rectangle.
 Draw the lines connecting the given list (or tuple) of points.
 \end{funcdesc}
 
-\begin{funcdesc}{shade}{rect\, percent}
+\begin{funcdesc}{shade}{rect, percent}
 Fill a rectangle with a shading pattern that is about
 \var{percent}
 percent filled.
 \end{funcdesc}
 
-\begin{funcdesc}{text}{p\, str}
+\begin{funcdesc}{text}{p, str}
 Draw a string starting at point p (the point specifies the
 top left coordinate of the string).
 \end{funcdesc}
 
-\begin{funcdesc}{xorcircle}{center\, radius}
-\funcline{xorelarc}{center\, \(rh\, rv\)\, \(a1\, a2\)}
-\funcline{xorline}{p1\, p2}
+\begin{funcdesc}{xorcircle}{center, radius}
+\funcline{xorelarc}{center, \(rh, rv\), \(a1, a2\)}
+\funcline{xorline}{p1, p2}
 \funcline{xorpoly}{points}
 Draw a circle, an elliptical arc, a line or a polygon, respectively,
 in XOR mode.
@@ -570,7 +570,7 @@ default font, which is in turn initialized from the global default
 font when the window is created.
 \end{funcdesc}
 
-\begin{funcdesc}{bitmap}{point\, bitmap\, mask}
+\begin{funcdesc}{bitmap}{point, bitmap, mask}
 Draw the \var{bitmap} with its top left corner at \var{point}.
 If the optional \var{mask} argument is present, it should be either
 the same object as \var{bitmap}, to draw only those bits that are set
@@ -608,23 +608,23 @@ The following methods are defined:
 
 \setindexsubitem{(menu method)}
 
-\begin{funcdesc}{additem}{text\, shortcut}
+\begin{funcdesc}{additem}{text, shortcut}
 Add a menu item with given text.
 The shortcut must be a string of length 1, or omitted (to specify no
 shortcut).
 \end{funcdesc}
 
-\begin{funcdesc}{setitem}{i\, text}
+\begin{funcdesc}{setitem}{i, text}
 Set the text of item number
 \var{i}.
 \end{funcdesc}
 
-\begin{funcdesc}{enable}{i\, flag}
+\begin{funcdesc}{enable}{i, flag}
 Enable or disables item
 \var{i}.
 \end{funcdesc}
 
-\begin{funcdesc}{check}{i\, flag}
+\begin{funcdesc}{check}{i, flag}
 Set or clear the
 \dfn{check mark}
 for item
@@ -652,7 +652,7 @@ Return a tuple representing the width and height of the bitmap.
 function.)
 \end{funcdesc}
 
-\begin{funcdesc}{setbit}{point\, bit}
+\begin{funcdesc}{setbit}{point, bit}
 Set the value of the bit indicated by \var{point} to \var{bit}.
 \end{funcdesc}
 
@@ -691,7 +691,7 @@ Pass a draw event to the text-edit block.
 The rectangle specifies the redraw area.
 \end{funcdesc}
 
-\begin{funcdesc}{event}{type\, window\, detail}
+\begin{funcdesc}{event}{type, window, detail}
 Pass an event gotten from
 \code{stdwin.getevent()}
 to the text-edit block.
@@ -727,7 +727,7 @@ Replace the text in the focus by the given string.
 The new focus is an insert point at the end of the string.
 \end{funcdesc}
 
-\begin{funcdesc}{setfocus}{i\, j}
+\begin{funcdesc}{setfocus}{i, j}
 Specify the new focus.
 Out-of-bounds values are silently clipped.
 \end{funcdesc}
@@ -869,7 +869,7 @@ Returns
 if the list is empty or all its rectangles are empty.
 \end{funcdesc}
 
-\begin{funcdesc}{pointinrect}{point\, rect}
+\begin{funcdesc}{pointinrect}{point, rect}
 Returns true if the point is inside the rectangle.
 By definition, a point
 \code{(\var{h}, \var{v})}
@@ -884,7 +884,7 @@ $\var{top} \leq \var{v} < \var{bottom}$.
 \fi
 \end{funcdesc}
 
-\begin{funcdesc}{inset}{rect\, \(dh\, dv\)}
+\begin{funcdesc}{inset}{rect, \(dh, dv\)}
 Returns a rectangle that lies inside the
 \code{rect}
 argument by
diff --git a/Doc/lib/libstring.tex b/Doc/lib/libstring.tex
index 7242c53..98e5a80 100644
--- a/Doc/lib/libstring.tex
+++ b/Doc/lib/libstring.tex
@@ -1,12 +1,11 @@
 \section{Standard Module \sectcode{string}}
 \label{module-string}
-
 \stmodindex{string}
 
 This module defines some constants useful for checking character
 classes and some useful string functions.  See the module
-\code{re} for string functions based on regular expressions.
-\refstmodindex{re}
+\module{re}\refstmodindex{re} for string functions based on regular
+expressions.
 
 The constants defined in this module are are:
 
@@ -20,16 +19,16 @@ The constants defined in this module are are:
 \end{datadesc}
 
 \begin{datadesc}{letters}
-  The concatenation of the strings \code{lowercase} and
-  \code{uppercase} described below.
+  The concatenation of the strings \function{lowercase()} and
+  \function{uppercase()} described below.
 \end{datadesc}
 
 \begin{datadesc}{lowercase}
   A string containing all the characters that are considered lowercase
   letters.  On most systems this is the string
   \code{'abcdefghijklmnopqrstuvwxyz'}.  Do not change its definition ---
-  the effect on the routines \code{upper} and \code{swapcase} is
-  undefined.
+  the effect on the routines \function{upper()} and
+  \function{swapcase()} is undefined.
 \end{datadesc}
 
 \begin{datadesc}{octdigits}
@@ -40,16 +39,16 @@ The constants defined in this module are are:
   A string containing all the characters that are considered uppercase
   letters.  On most systems this is the string
   \code{'ABCDEFGHIJKLMNOPQRSTUVWXYZ'}.  Do not change its definition ---
-  the effect on the routines \code{lower} and \code{swapcase} is
-  undefined.
+  the effect on the routines \function{lower()} and
+  \function{swapcase()} is undefined.
 \end{datadesc}
 
 \begin{datadesc}{whitespace}
   A string containing all characters that are considered whitespace.
   On most systems this includes the characters space, tab, linefeed,
   return, formfeed, and vertical tab.  Do not change its definition ---
-  the effect on the routines \code{strip} and \code{split} is
-  undefined.
+  the effect on the routines \function{strip()} and \function{split()}
+  is undefined.
 \end{datadesc}
 
 The functions defined in this module are:
@@ -60,10 +59,11 @@ The functions defined in this module are:
 Convert a string to a floating point number.  The string must have
 the standard syntax for a floating point literal in Python, optionally
 preceded by a sign (\samp{+} or \samp{-}).  Note that this behaves
-identical to the built-in function \code{float()} when passed a string.
+identical to the built-in function
+\function{float()}\bifuncindex{float} when passed a string.
 \end{funcdesc}
 
-\begin{funcdesc}{atoi}{s\optional{\, base}}
+\begin{funcdesc}{atoi}{s\optional{, base}}
 Convert string \var{s} to an integer in the given \var{base}.  The
 string must consist of one or more digits, optionally preceded by a
 sign (\samp{+} or \samp{-}).  The \var{base} defaults to 10.  If it is
@@ -72,20 +72,20 @@ string (after stripping the sign): \samp{0x} or \samp{0X} means 16,
 \samp{0} means 8, anything else means 10.  If \var{base} is 16, a
 leading \samp{0x} or \samp{0X} is always accepted.  Note that when
 invoked without \var{base} or with \var{base} set to 10, this behaves
-identical to the built-in function \code{int()} when passed a string.
+identical to the built-in function \function{int()} when passed a string.
 (Also note: for a more flexible interpretation of numeric literals,
-use the built-in function \code{eval()}.)
-\bifuncindex{eval}
+use the built-in function \function{eval()}\bifuncindex{eval}.)
 \end{funcdesc}
 
-\begin{funcdesc}{atol}{s\optional{\, base}}
-Convert string \var{s} to a long integer in the given \var{base}.  The
+\begin{funcdesc}{atol}{s\optional{, base}}
+Convert string \var{s} to a long integer in the given \var{base}.  The 
 string must consist of one or more digits, optionally preceded by a
 sign (\samp{+} or \samp{-}).  The \var{base} argument has the same
-meaning as for \code{atoi()}.  A trailing \samp{l} or \samp{L} is not
-allowed, except if the base is 0.  Note that when invoked without
+meaning as for \function{atoi()}.  A trailing \samp{l} or \samp{L} is
+not allowed, except if the base is 0.  Note that when invoked without
 \var{base} or with \var{base} set to 10, this behaves identical to the
-built-in function \code{long()} when passed a string.
+built-in function \function{long()}\bifuncindex{long} when passed a
+string.
 \end{funcdesc}
 
 \begin{funcdesc}{capitalize}{word}
@@ -93,13 +93,14 @@ Capitalize the first character of the argument.
 \end{funcdesc}
 
 \begin{funcdesc}{capwords}{s}
-Split the argument into words using \code{split}, capitalize each word
-using \code{capitalize}, and join the capitalized words using
-\code{join}.  Note that this replaces runs of whitespace characters by
-a single space, and removes leading and trailing whitespace.
+Split the argument into words using \function{split()}, capitalize
+each word using \function{capitalize()}, and join the capitalized
+words using \function{join()}.  Note that this replaces runs of
+whitespace characters by a single space, and removes leading and
+trailing whitespace.
 \end{funcdesc}
 
-\begin{funcdesc}{expandtabs}{s\, tabsize}
+\begin{funcdesc}{expandtabs}{s, tabsize}
 Expand tabs in a string, i.e.\ replace them by one or more spaces,
 depending on the current column and the given tab size.  The column
 number is reset to zero after each newline occurring in the string.
@@ -107,29 +108,29 @@ This doesn't understand other non-printing characters or escape
 sequences.
 \end{funcdesc}
 
-\begin{funcdesc}{find}{s\, sub\optional{\, start\optional{\,end}}}
+\begin{funcdesc}{find}{s, sub\optional{, start\optional{,end}}}
 Return the lowest index in \var{s} where the substring \var{sub} is
 found such that \var{sub} is wholly contained in
-\code{\var{s}[\var{start}:\var{end}]}.  Return -1 on failure.
+\code{\var{s}[\var{start}:\var{end}]}.  Return \code{-1} on failure.
 Defaults for \var{start} and \var{end} and interpretation of negative
 values is the same as for slices.
 \end{funcdesc}
 
-\begin{funcdesc}{rfind}{s\, sub\optional{\, start\optional{\,end}}}
-Like \code{find} but find the highest index.
+\begin{funcdesc}{rfind}{s, sub\optional{, start\optional{, end}}}
+Like \function{find()} but find the highest index.
 \end{funcdesc}
 
-\begin{funcdesc}{index}{s\, sub\optional{\, start\optional{\,end}}}
-Like \code{find} but raise \code{ValueError} when the substring is
-not found.
+\begin{funcdesc}{index}{s, sub\optional{, start\optional{, end}}}
+Like \function{find()} but raise \exception{ValueError} when the
+substring is not found.
 \end{funcdesc}
 
-\begin{funcdesc}{rindex}{s\, sub\optional{\, start\optional{\,end}}}
-Like \code{rfind} but raise \code{ValueError} when the substring is
-not found.
+\begin{funcdesc}{rindex}{s, sub\optional{, start\optional{, end}}}
+Like \function{rfind()} but raise \exception{ValueError} when the
+substring is not found.
 \end{funcdesc}
 
-\begin{funcdesc}{count}{s\, sub\optional{\, start\optional{\,end}}}
+\begin{funcdesc}{count}{s, sub\optional{, start\optional{, end}}}
 Return the number of (non-overlapping) occurrences of substring
 \var{sub} in string \code{\var{s}[\var{start}:\var{end}]}.
 Defaults for \var{start} and \var{end} and interpretation of negative
@@ -141,13 +142,13 @@ Convert letters to lower case.
 \end{funcdesc}
 
 \begin{funcdesc}{maketrans}{from, to}
-Return a translation table suitable for passing to \code{string.translate}
-or \code{regex.compile}, that will map each character in \var{from} 
-into the character at the same position in \var{to}; \var{from} and
-\var{to} must have the same length. 
+Return a translation table suitable for passing to
+\function{translate()} or \function{regex.compile()}, that will map
+each character in \var{from} into the character at the same position
+in \var{to}; \var{from} and \var{to} must have the same length. 
 \end{funcdesc}
 
-\begin{funcdesc}{split}{s\optional{\, sep\optional{\, maxsplit}}}
+\begin{funcdesc}{split}{s\optional{, sep\optional{, maxsplit}}}
 Return a list of the words of the string \var{s}.  If the optional
 second argument \var{sep} is absent or \code{None}, the words are
 separated by arbitrary strings of whitespace characters (space, tab,
@@ -161,24 +162,24 @@ remainder of the string is returned as the final element of the list
 (thus, the list will have at most \code{\var{maxsplit}+1} elements).
 \end{funcdesc}
 
-\begin{funcdesc}{splitfields}{s\optional{\, sep\optional{\, maxsplit}}}
-This function behaves identically to \code{split}.  (In the past,
-\code{split} was only used with one argument, while \code{splitfields}
-was only used with two arguments.)
+\begin{funcdesc}{splitfields}{s\optional{, sep\optional{, maxsplit}}}
+This function behaves identically to \function{split()}.  (In the
+past, \function{split()} was only used with one argument, while
+\function{splitfields()} was only used with two arguments.)
 \end{funcdesc}
 
-\begin{funcdesc}{join}{words\optional{\, sep}}
+\begin{funcdesc}{join}{words\optional{, sep}}
 Concatenate a list or tuple of words with intervening occurrences of
-\var{sep}.  The default value for \var{sep} is a single space character.
-It is always true that
-\code{string.join(string.split(\var{s}, \var{sep}), \var{sep})}
+\var{sep}.  The default value for \var{sep} is a single space
+character.  It is always true that
+\samp{string.join(string.split(\var{s}, \var{sep}), \var{sep})}
 equals \var{s}.
 \end{funcdesc}
 
-\begin{funcdesc}{joinfields}{words\optional{\, sep}}
-This function behaves identical to \code{join}.  (In the past,
-\code{join} was only used with one argument, while \code{joinfields}
-was only used with two arguments.)
+\begin{funcdesc}{joinfields}{words\optional{, sep}}
+This function behaves identical to \function{join()}.  (In the past,
+\function{join()} was only used with one argument, while
+\function{joinfields()} was only used with two arguments.)
 \end{funcdesc}
 
 \begin{funcdesc}{lstrip}{s}
@@ -198,19 +199,19 @@ Convert lower case letters to upper case and vice versa.
 \end{funcdesc}
 
 \begin{funcdesc}{translate}{s, table\optional{, deletechars}}
-Delete all characters from \var{s} that are in \var{deletechars} (if present), and 
-then translate the characters using \var{table}, which must be
-a 256-character string giving the translation for each character
-value, indexed by its ordinal.  
+Delete all characters from \var{s} that are in \var{deletechars} (if
+present), and then translate the characters using \var{table}, which
+must be a 256-character string giving the translation for each
+character value, indexed by its ordinal.  
 \end{funcdesc}
 
 \begin{funcdesc}{upper}{s}
 Convert letters to upper case.
 \end{funcdesc}
 
-\begin{funcdesc}{ljust}{s\, width}
-\funcline{rjust}{s\, width}
-\funcline{center}{s\, width}
+\begin{funcdesc}{ljust}{s, width}
+\funcline{rjust}{s, width}
+\funcline{center}{s, width}
 These functions respectively left-justify, right-justify and center a
 string in a field of given width.
 They return a string that is at least
@@ -221,7 +222,7 @@ with spaces until the given width on the right, left or both sides.
 The string is never truncated.
 \end{funcdesc}
 
-\begin{funcdesc}{zfill}{s\, width}
+\begin{funcdesc}{zfill}{s, width}
 Pad a numeric string on the left with zero digits until the given
 width is reached.  Strings starting with a sign are handled correctly.
 \end{funcdesc}
@@ -234,10 +235,10 @@ replaced.
 \end{funcdesc}
 
 This module is implemented in Python.  Much of its functionality has
-been reimplemented in the built-in module \code{strop}.  However, you
+been reimplemented in the built-in module
+\module{strop}\refbimodindex{strop}.  However, you
 should \emph{never} import the latter module directly.  When
-\code{string} discovers that \code{strop} exists, it transparently
-replaces parts of itself with the implementation from \code{strop}.
+\module{string} discovers that \module{strop} exists, it transparently
+replaces parts of itself with the implementation from \module{strop}.
 After initialization, there is \emph{no} overhead in using
-\code{string} instead of \code{strop}.
-\refbimodindex{strop}
+\module{string} instead of \module{strop}.
diff --git a/Doc/lib/libstruct.tex b/Doc/lib/libstruct.tex
index d0fde4f..b92076c 100644
--- a/Doc/lib/libstruct.tex
+++ b/Doc/lib/libstruct.tex
@@ -16,14 +16,14 @@ The module defines the following exception and functions:
   describing what is wrong.
 \end{excdesc}
 
-\begin{funcdesc}{pack}{fmt\, v1\, v2\, {\rm \ldots}}
+\begin{funcdesc}{pack}{fmt, v1, v2, {\rm \ldots}}
   Return a string containing the values
   \code{\var{v1}, \var{v2}, {\rm \ldots}} packed according to the given
   format.  The arguments must match the values required by the format
   exactly.
 \end{funcdesc}
 
-\begin{funcdesc}{unpack}{fmt\, string}
+\begin{funcdesc}{unpack}{fmt, string}
   Unpack the string (presumably packed by \code{pack(\var{fmt}, {\rm \ldots})})
   according to the given format.  The result is a tuple even if it
   contains exactly one item.  The string must contain exactly the
diff --git a/Doc/lib/libsyslog.tex b/Doc/lib/libsyslog.tex
index 8348e9c..5d2b6a9 100644
--- a/Doc/lib/libsyslog.tex
+++ b/Doc/lib/libsyslog.tex
@@ -10,7 +10,7 @@ The module defines the following functions:
 
 \setindexsubitem{(in module syslog)}
 
-\begin{funcdesc}{syslog}{\optional{priority\,} message}
+\begin{funcdesc}{syslog}{\optional{priority,} message}
 Send the string \var{message} to the system logger.
 A trailing newline is added if necessary.
 Each message is tagged with a priority composed of a \var{facility} and
diff --git a/Doc/lib/libtemplate.tex b/Doc/lib/libtemplate.tex
index db07934..3fb4f51 100644
--- a/Doc/lib/libtemplate.tex
+++ b/Doc/lib/libtemplate.tex
@@ -61,7 +61,7 @@ The \module{spam} module defines the following functions:
 % least once in the description; each usage (even inside \code{...})
 % should be enclosed in \var{...}.
 
-\begin{funcdesc}{open}{filename\optional{\, mode\, buffersize}}
+\begin{funcdesc}{open}{filename\optional{, mode, buffersize}}
 Open the file \var{filename} as a can of Spam.  The optional
 \var{mode} and \var{buffersize} arguments specify the read-write mode
 (\code{'r'} (default) or \code{'w'}) and the buffer size (default:
diff --git a/Doc/lib/libthread.tex b/Doc/lib/libthread.tex
index 24ebac5..dabfe70 100644
--- a/Doc/lib/libthread.tex
+++ b/Doc/lib/libthread.tex
@@ -25,7 +25,7 @@ It defines the following constant and functions:
 Raised on thread-specific errors.
 \end{excdesc}
 
-\begin{funcdesc}{start_new_thread}{func\, arg}
+\begin{funcdesc}{start_new_thread}{func, arg}
 Start a new thread.  The thread executes the function \var{func}
 with the argument list \var{arg} (which must be a tuple).  When the
 function returns, the thread silently exits.  When the function
diff --git a/Doc/lib/libtypes.tex b/Doc/lib/libtypes.tex
index 5c87653..70f970e 100644
--- a/Doc/lib/libtypes.tex
+++ b/Doc/lib/libtypes.tex
@@ -534,9 +534,9 @@ dictionary entry.
 \indexii{dictionary}{type}
 
 Dictionaries are created by placing a comma-separated list of
-\code{\var{key}:\,\var{value}} pairs within braces, for example:
-\code{\{'jack':\,4098, 'sjoerd':\,4127\}} or
-\code{\{4098:\,'jack', 4127:\,'sjoerd'\}}.
+\code{\var{key}: \var{value}} pairs within braces, for example:
+\code{\{'jack': 4098, 'sjoerd': 4127\}} or
+\code{\{4098: 'jack', 4127: 'sjoerd'\}}.
 
 The following operations are defined on mappings (where \var{a} is a
 mapping, \var{k} is a key and \var{x} is an arbitrary object):
@@ -767,7 +767,7 @@ descriptors, e.g. module \code{fcntl} or \code{os.read()} and friends.
   internal buffer size) are read.
 \end{funcdesc}
 
-\begin{funcdesc}{seek}{offset\, whence}
+\begin{funcdesc}{seek}{offset, whence}
   Set the file's current position, like \code{stdio}'s \code{fseek()}.
   The \var{whence} argument is optional and defaults to \code{0}
   (absolute file positioning); other values are \code{1} (seek
diff --git a/Doc/lib/liburllib.tex b/Doc/lib/liburllib.tex
index 01fc875..1732d85 100644
--- a/Doc/lib/liburllib.tex
+++ b/Doc/lib/liburllib.tex
@@ -55,7 +55,7 @@ Clear the cache that may have been built up by previous calls to
 \function{urlretrieve()}.
 \end{funcdesc}
 
-\begin{funcdesc}{quote}{string\optional{\, addsafe}}
+\begin{funcdesc}{quote}{string\optional{, addsafe}}
 Replace special characters in \var{string} using the \samp{\%xx} escape.
 Letters, digits, and the characters \character{_,.-} are never quoted.
 The optional \var{addsafe} parameter specifies additional characters
@@ -64,7 +64,7 @@ that should not be quoted --- its default value is \code{'/'}.
 Example: \code{quote('/\~connolly/')} yields \code{'/\%7econnolly/'}.
 \end{funcdesc}
 
-\begin{funcdesc}{quote_plus}{string\optional{\, addsafe}}
+\begin{funcdesc}{quote_plus}{string\optional{, addsafe}}
 Like \function{quote()}, but also replaces spaces by plus signs, as
 required for quoting HTML form values.
 \end{funcdesc}
diff --git a/Doc/lib/liburlparse.tex b/Doc/lib/liburlparse.tex
index 32d88ee..3017a16 100644
--- a/Doc/lib/liburlparse.tex
+++ b/Doc/lib/liburlparse.tex
@@ -61,7 +61,7 @@ URL that was parsed originally had redundant delimiters, e.g. a ? with
 an empty query (the draft states that these are equivalent).
 \end{funcdesc}
 
-\begin{funcdesc}{urljoin}{base\, url\optional{\, allow_fragments}}
+\begin{funcdesc}{urljoin}{base, url\optional{, allow_fragments}}
 Construct a full (``absolute'') URL by combining a ``base URL''
 (\var{base}) with a ``relative URL'' (\var{url}).  Informally, this
 uses components of the base URL, in particular the addressing scheme,
diff --git a/Doc/lib/libuu.tex b/Doc/lib/libuu.tex
index 87182dc..e953628 100644
--- a/Doc/lib/libuu.tex
+++ b/Doc/lib/libuu.tex
@@ -19,7 +19,7 @@ The \module{uu} module defines the following functions:
 
 \setindexsubitem{(in module uu)}
 
-\begin{funcdesc}{encode}{in_file\, out_file\optional{\, name\, mode}}
+\begin{funcdesc}{encode}{in_file, out_file\optional{, name, mode}}
 Uuencode file \var{in_file} into file \var{out_file}.  The uuencoded
 file will have the header specifying \var{name} and \var{mode} as the
 defaults for the results of decoding the file. The default defaults
@@ -27,7 +27,7 @@ are taken from \var{in_file}, or \code{'-'} and \code{0666}
 respectively. 
 \end{funcdesc}
 
-\begin{funcdesc}{decode}{in_file\optional{\, out_file\, mode}}
+\begin{funcdesc}{decode}{in_file\optional{, out_file, mode}}
 This call decodes uuencoded file \var{in_file} placing the result on
 file \var{out_file}. If \var{out_file} is a pathname the \var{mode} is
 also set. Defaults for \var{out_file} and \var{mode} are taken from
diff --git a/Doc/lib/libwhrandom.tex b/Doc/lib/libwhrandom.tex
index cac7de7..7803184 100644
--- a/Doc/lib/libwhrandom.tex
+++ b/Doc/lib/libwhrandom.tex
@@ -11,7 +11,7 @@ class that is also named \code{whrandom}.  Instances of the
 Chooses a random element from the non-empty sequence \var{seq} and returns it.
 \end{funcdesc}
 
-\begin{funcdesc}{randint}{a\, b}
+\begin{funcdesc}{randint}{a, b}
 Returns a random integer \var{N} such that \code{\var{a}<=\var{N}<=\var{b}}.
 \end{funcdesc}
 
@@ -19,7 +19,7 @@ Returns a random integer \var{N} such that \code{\var{a}<=\var{N}<=\var{b}}.
 Returns the next random floating point number in the range [0.0 ... 1.0).
 \end{funcdesc}
 
-\begin{funcdesc}{seed}{x\, y\, z}
+\begin{funcdesc}{seed}{x, y, z}
 Initializes the random number generator from the integers
 \var{x},
 \var{y}
@@ -29,7 +29,7 @@ When the module is first imported, the random number is initialized
 using values derived from the current time.
 \end{funcdesc}
 
-\begin{funcdesc}{uniform}{a\, b}
+\begin{funcdesc}{uniform}{a, b}
 Returns a random real number \var{N} such that \code{\var{a}<=\var{N}<\var{b}}.
 \end{funcdesc}
 
diff --git a/Doc/lib/libxdrlib.tex b/Doc/lib/libxdrlib.tex
index 221a578..62e9df7 100644
--- a/Doc/lib/libxdrlib.tex
+++ b/Doc/lib/libxdrlib.tex
@@ -96,7 +96,7 @@ the individual item.  At the end of the list, an unsigned integer
 \code{0} is packed.
 \end{funcdesc}
 
-\begin{funcdesc}{pack_farray}{n\, array\, pack_item}
+\begin{funcdesc}{pack_farray}{n, array, pack_item}
 Packs a fixed length list (\var{array}) of homogeneous items.  \var{n}
 is the length of the list; it is \emph{not} packed into the buffer,
 but a \exception{ValueError} exception is raised if
@@ -104,7 +104,7 @@ but a \exception{ValueError} exception is raised if
 \var{pack_item} is the function used to pack each element.
 \end{funcdesc}
 
-\begin{funcdesc}{pack_array}{list\, pack_item}
+\begin{funcdesc}{pack_array}{list, pack_item}
 Packs a variable length \var{list} of homogeneous items.  First, the
 length of the list is packed as an unsigned integer, then each element
 is packed as in \method{pack_farray()} above.
@@ -192,7 +192,7 @@ then the item is unpacked and appended to the list.  A flag of
 function that is called to unpack the items.
 \end{funcdesc}
 
-\begin{funcdesc}{unpack_farray}{n\, unpack_item}
+\begin{funcdesc}{unpack_farray}{n, unpack_item}
 Unpacks and returns (as a list) a fixed length array of homogeneous
 items.  \var{n} is number of list elements to expect in the buffer.
 As above, \var{unpack_item} is the function used to unpack each element.
diff --git a/Doc/lib/libxmllib.tex b/Doc/lib/libxmllib.tex
index ba9e006..efc7f00 100644
--- a/Doc/lib/libxmllib.tex
+++ b/Doc/lib/libxmllib.tex
@@ -78,7 +78,7 @@ The base implementation simply calls \var{method} with \var{attributes}
 as the only argument.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_endtag}{tag\, method}
+\begin{funcdesc}{handle_endtag}{tag, method}
 This method is called to handle endtags for which an
 \code{end_\var{tag}()} method has been defined.  The \var{tag}
 argument is the name of the tag, and the
@@ -170,7 +170,7 @@ raise a \exception{RuntimeError} without first calling
 \method{syntax_error()}.
 \end{funcdesc}
 
-\begin{funcdesc}{unknown_starttag}{tag\, attributes}
+\begin{funcdesc}{unknown_starttag}{tag, attributes}
 This method is called to process an unknown start tag.  It is intended
 to be overridden by a derived class; the base class implementation
 does nothing.
diff --git a/Doc/lib/libzlib.tex b/Doc/lib/libzlib.tex
index 9234c5f..c4ad987 100644
--- a/Doc/lib/libzlib.tex
+++ b/Doc/lib/libzlib.tex
@@ -14,7 +14,7 @@ later version if one is available.
 The available functions in this module are:
 
 \setindexsubitem{(in module zlib)}
-\begin{funcdesc}{adler32}{string\optional{\, value}}
+\begin{funcdesc}{adler32}{string\optional{, value}}
    Computes a Adler-32 checksum of \var{string}.  (An Adler-32
    checksum is almost as reliable as a CRC32 but can be computed much
    more quickly.)  If \var{value} is present, it is used as the
@@ -25,7 +25,7 @@ The available functions in this module are:
    authentication or digital signatures.
 \end{funcdesc}
 
-\begin{funcdesc}{compress}{string\optional{\, level}}
+\begin{funcdesc}{compress}{string\optional{, level}}
 Compresses the data in \var{string}, returning a string contained
 compressed data.  \var{level} is an integer from \code{1} to \code{9}
 controlling the level of compression; \code{1} is fastest and produces
@@ -42,7 +42,7 @@ exception if any error occurs.
   produces the most.  The default value is \code{6}.
 \end{funcdesc}
 
-\begin{funcdesc}{crc32}{string\optional{\, value}}
+\begin{funcdesc}{crc32}{string\optional{, value}}
    Computes a CRC (Cyclic Redundancy Check) sum of \var{string}. If
    \var{value} is present, it is used as the starting value of the
    checksum; otherwise, a fixed default value is used.  This allows
diff --git a/Doc/libaifc.tex b/Doc/libaifc.tex
index 34df720..8bb88a1 100644
--- a/Doc/libaifc.tex
+++ b/Doc/libaifc.tex
@@ -24,7 +24,7 @@ second's worth occupies 2*2*44100 bytes, i.e.\ 176,400 bytes.
 Module \code{aifc} defines the following function:
 
 \setindexsubitem{(in module aifc)}
-\begin{funcdesc}{open}{file\, mode}
+\begin{funcdesc}{open}{file, mode}
 Open an AIFF or AIFF-C file and return an object instance with
 methods that are described below.  The argument file is either a
 string naming a file or a file object.  The mode is either the string
@@ -146,7 +146,7 @@ If this parameter is not set, or not set correctly, the file needs to
 support seeking.
 \end{funcdesc}
 
-\begin{funcdesc}{setcomptype}{type\, name}
+\begin{funcdesc}{setcomptype}{type, name}
 Specify the compression type.  If not specified, the audio data will
 not be compressed.  In AIFF files, compression is not possible.  The
 name parameter should be a human-readable description of the
@@ -155,14 +155,14 @@ string.  Currently the following compression types are supported:
 NONE, ULAW, ALAW, G722.
 \end{funcdesc}
 
-\begin{funcdesc}{setparams}{nchannels\, sampwidth\, framerate\, comptype\, compname}
+\begin{funcdesc}{setparams}{nchannels, sampwidth, framerate, comptype, compname}
 Set all the above parameters at once.  The argument is a tuple
 consisting of the various parameters.  This means that it is possible
 to use the result of a \code{getparams()} call as argument to
 \code{setparams()}.
 \end{funcdesc}
 
-\begin{funcdesc}{setmark}{id\, pos\, name}
+\begin{funcdesc}{setmark}{id, pos, name}
 Add a mark with the given id (larger than 0), and the given name at
 the given position.  This method can be called at any time before
 \code{close()}.
diff --git a/Doc/libal.tex b/Doc/libal.tex
index 63bdf1b..1126f83 100644
--- a/Doc/libal.tex
+++ b/Doc/libal.tex
@@ -27,7 +27,7 @@ The module defines the following functions:
 
 \setindexsubitem{(in module al)}
 
-\begin{funcdesc}{openport}{name\, direction\optional{\, config}}
+\begin{funcdesc}{openport}{name, direction\optional{, config}}
 The name and direction arguments are strings.  The optional config
 argument is a configuration object as returned by
 \code{al.newconfig()}.  The return value is an \dfn{port object};
@@ -44,12 +44,12 @@ The device argument is an integer.  The return value is a list of
 integers containing the data returned by ALqueryparams().
 \end{funcdesc}
 
-\begin{funcdesc}{getparams}{device\, list}
+\begin{funcdesc}{getparams}{device, list}
 The device argument is an integer.  The list argument is a list such
 as returned by \code{queryparams}; it is modified in place (!).
 \end{funcdesc}
 
-\begin{funcdesc}{setparams}{device\, list}
+\begin{funcdesc}{setparams}{device, list}
 The device argument is an integer.  The list argument is a list such
 as returned by \code{al.queryparams}.
 \end{funcdesc}
diff --git a/Doc/libamoeba.tex b/Doc/libamoeba.tex
index d471f35..3e64257 100644
--- a/Doc/libamoeba.tex
+++ b/Doc/libamoeba.tex
@@ -12,7 +12,7 @@ the exception \code{amoeba.error = 'amoeba.error'}.
 The module \code{amoeba} defines the following items:
 
 \setindexsubitem{(in module amoeba)}
-\begin{funcdesc}{name_append}{path\, cap}
+\begin{funcdesc}{name_append}{path, cap}
 Stores a capability in the Amoeba directory tree.
 Arguments are the pathname (a string) and the capability (a capability
 object as returned by
@@ -32,7 +32,7 @@ Returns a
 object, to which various interesting operations apply, described below.
 \end{funcdesc}
 
-\begin{funcdesc}{name_replace}{path\, cap}
+\begin{funcdesc}{name_replace}{path, cap}
 Replaces a capability in the Amoeba directory tree.
 Arguments are the pathname and the new capability.
 (This differs from
@@ -91,7 +91,7 @@ The following methods are defined for capability objects.
 Returns a list of the names of the entries in an Amoeba directory.
 \end{funcdesc}
 
-\begin{funcdesc}{b_read}{offset\, maxsize}
+\begin{funcdesc}{b_read}{offset, maxsize}
 Reads (at most)
 \var{maxsize}
 bytes from a bullet file at offset
diff --git a/Doc/libanydbm.tex b/Doc/libanydbm.tex
index c7e5ae3..1c46c61 100644
--- a/Doc/libanydbm.tex
+++ b/Doc/libanydbm.tex
@@ -13,7 +13,7 @@ will be used.   Both modules provide the same interface:
 % at the same time.
 \setindexsubitem{(in modules anydbm, dumbdbm)}
 
-\begin{funcdesc}{open}{filename\optional{\, flag\, mode}}
+\begin{funcdesc}{open}{filename\optional{, flag, mode}}
 Open the database file \var{filename} and return a corresponding object.
 The optional \var{flag} argument can be
 \code{'r'} to open an existing database for reading only,
diff --git a/Doc/libarray.tex b/Doc/libarray.tex
index 0380bd6..03b4933 100644
--- a/Doc/libarray.tex
+++ b/Doc/libarray.tex
@@ -35,7 +35,7 @@ See also built-in module \module{struct}\refbimodindex{struct}.
 
 The module defines the following function:
 
-\begin{funcdesc}{array}{typecode\optional{\, initializer}}
+\begin{funcdesc}{array}{typecode\optional{, initializer}}
 Return a new array whose items are restricted by \var{typecode}, and
 initialized from the optional \var{initializer} value, which must be a
 list or a string.  The list or string is passed to the new array's
@@ -77,7 +77,7 @@ integer values.  It is useful when reading data from a file written
 on a machine with a different byte order.
 \end{funcdesc}
 
-\begin{funcdesc}{fromfile}{f\, n}
+\begin{funcdesc}{fromfile}{f, n}
 Read \var{n} items (as machine values) from the file object \var{f}
 and append them to the end of the array.  If less than \var{n} items
 are available, \exception{EOFError} is raised, but the items that were
@@ -98,12 +98,12 @@ array of machine values (i.e. as if it had been read from a
 file using the \method{fromfile()} method).
 \end{funcdesc}
 
-\begin{funcdesc}{insert}{i\, x}
+\begin{funcdesc}{insert}{i, x}
 Insert a new item with value \var{x} in the array before position
 \var{i}.
 \end{funcdesc}
 
-\begin{funcdesc}{read}{f\, n}
+\begin{funcdesc}{read}{f, n}
 \deprecated {1.5.1}
   {Use the \method{fromfile()} method.}
 Read \var{n} items (as machine values) from the file object \var{f}
diff --git a/Doc/libaudioop.tex b/Doc/libaudioop.tex
index 69a3a83..887cac9 100644
--- a/Doc/libaudioop.tex
+++ b/Doc/libaudioop.tex
@@ -19,46 +19,46 @@ This exception is raised on all errors, such as unknown number of bytes
 per sample, etc.
 \end{excdesc}
 
-\begin{funcdesc}{add}{fragment1\, fragment2\, width}
+\begin{funcdesc}{add}{fragment1, fragment2, width}
 Return a fragment which is the addition of the two samples passed as
 parameters.  \var{width} is the sample width in bytes, either
 \code{1}, \code{2} or \code{4}.  Both fragments should have the same
 length.
 \end{funcdesc}
 
-\begin{funcdesc}{adpcm2lin}{adpcmfragment\, width\, state}
+\begin{funcdesc}{adpcm2lin}{adpcmfragment, width, state}
 Decode an Intel/DVI ADPCM coded fragment to a linear fragment.  See
 the description of \code{lin2adpcm} for details on ADPCM coding.
 Return a tuple \code{(\var{sample}, \var{newstate})} where the sample
 has the width specified in \var{width}.
 \end{funcdesc}
 
-\begin{funcdesc}{adpcm32lin}{adpcmfragment\, width\, state}
+\begin{funcdesc}{adpcm32lin}{adpcmfragment, width, state}
 Decode an alternative 3-bit ADPCM code.  See \code{lin2adpcm3} for
 details.
 \end{funcdesc}
 
-\begin{funcdesc}{avg}{fragment\, width}
+\begin{funcdesc}{avg}{fragment, width}
 Return the average over all samples in the fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{avgpp}{fragment\, width}
+\begin{funcdesc}{avgpp}{fragment, width}
 Return the average peak-peak value over all samples in the fragment.
 No filtering is done, so the usefulness of this routine is
 questionable.
 \end{funcdesc}
 
-\begin{funcdesc}{bias}{fragment\, width\, bias}
+\begin{funcdesc}{bias}{fragment, width, bias}
 Return a fragment that is the original fragment with a bias added to
 each sample.
 \end{funcdesc}
 
-\begin{funcdesc}{cross}{fragment\, width}
+\begin{funcdesc}{cross}{fragment, width}
 Return the number of zero crossings in the fragment passed as an
 argument.
 \end{funcdesc}
 
-\begin{funcdesc}{findfactor}{fragment\, reference}
+\begin{funcdesc}{findfactor}{fragment, reference}
 Return a factor \var{F} such that
 \code{rms(add(fragment, mul(reference, -F)))} is minimal, i.e.,
 return the factor with which you should multiply \var{reference} to
@@ -68,7 +68,7 @@ should both contain 2-byte samples.
 The time taken by this routine is proportional to \code{len(fragment)}. 
 \end{funcdesc}
 
-\begin{funcdesc}{findfit}{fragment\, reference}
+\begin{funcdesc}{findfit}{fragment, reference}
 This routine (which only accepts 2-byte sample fragments)
 
 Try to match \var{reference} as well as possible to a portion of
@@ -82,7 +82,7 @@ and \var{factor} is the (floating-point) factor as per
 \code{findfactor}.
 \end{funcdesc}
 
-\begin{funcdesc}{findmax}{fragment\, length}
+\begin{funcdesc}{findmax}{fragment, length}
 Search \var{fragment} for a slice of length \var{length} samples (not
 bytes!)\ with maximum energy, i.e., return \var{i} for which
 \code{rms(fragment[i*2:(i+length)*2])} is maximal.  The fragments
@@ -91,15 +91,15 @@ should both contain 2-byte samples.
 The routine takes time proportional to \code{len(fragment)}.
 \end{funcdesc}
 
-\begin{funcdesc}{getsample}{fragment\, width\, index}
+\begin{funcdesc}{getsample}{fragment, width, index}
 Return the value of sample \var{index} from the fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{lin2lin}{fragment\, width\, newwidth}
+\begin{funcdesc}{lin2lin}{fragment, width, newwidth}
 Convert samples between 1-, 2- and 4-byte formats.
 \end{funcdesc}
 
-\begin{funcdesc}{lin2adpcm}{fragment\, width\, state}
+\begin{funcdesc}{lin2adpcm}{fragment, width, state}
 Convert samples to 4 bit Intel/DVI ADPCM encoding.  ADPCM coding is an
 adaptive coding scheme, whereby each 4 bit number is the difference
 between one sample and the next, divided by a (varying) step.  The
@@ -113,41 +113,41 @@ initial call \code{None} can be passed as the state.  \var{adpcmfrag}
 is the ADPCM coded fragment packed 2 4-bit values per byte.
 \end{funcdesc}
 
-\begin{funcdesc}{lin2adpcm3}{fragment\, width\, state}
+\begin{funcdesc}{lin2adpcm3}{fragment, width, state}
 This is an alternative ADPCM coder that uses only 3 bits per sample.
 It is not compatible with the Intel/DVI ADPCM coder and its output is
 not packed (due to laziness on the side of the author).  Its use is
 discouraged.
 \end{funcdesc}
 
-\begin{funcdesc}{lin2ulaw}{fragment\, width}
+\begin{funcdesc}{lin2ulaw}{fragment, width}
 Convert samples in the audio fragment to U-LAW encoding and return
 this as a Python string.  U-LAW is an audio encoding format whereby
 you get a dynamic range of about 14 bits using only 8 bit samples.  It
 is used by the Sun audio hardware, among others.
 \end{funcdesc}
 
-\begin{funcdesc}{minmax}{fragment\, width}
+\begin{funcdesc}{minmax}{fragment, width}
 Return a tuple consisting of the minimum and maximum values of all
 samples in the sound fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{max}{fragment\, width}
+\begin{funcdesc}{max}{fragment, width}
 Return the maximum of the \emph{absolute value} of all samples in a
 fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{maxpp}{fragment\, width}
+\begin{funcdesc}{maxpp}{fragment, width}
 Return the maximum peak-peak value in the sound fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{mul}{fragment\, width\, factor}
+\begin{funcdesc}{mul}{fragment, width, factor}
 Return a fragment that has all samples in the original framgent
 multiplied by the floating-point value \var{factor}.  Overflow is
 silently ignored.
 \end{funcdesc}
 
-\begin{funcdesc}{ratecv}{fragment\, width\, nchannels\, inrate\, outrate\, state\optional{\, weightA\, weightB}}
+\begin{funcdesc}{ratecv}{fragment, width, nchannels, inrate, outrate, state\optional{, weightA, weightB}}
 Convert the frame rate of the input fragment.
 
 \code{State} is a tuple containing the state of the converter.  The
@@ -158,11 +158,11 @@ The \code{weightA} and \code{weightB} arguments are parameters for a
 simple digital filter and default to 1 and 0 respectively.
 \end{funcdesc}
 
-\begin{funcdesc}{reverse}{fragment\, width}
+\begin{funcdesc}{reverse}{fragment, width}
 Reverse the samples in a fragment and returns the modified fragment.
 \end{funcdesc}
 
-\begin{funcdesc}{rms}{fragment\, width}
+\begin{funcdesc}{rms}{fragment, width}
 Return the root-mean-square of the fragment, i.e.
 \iftexi
 the square root of the quotient of the sum of all squared sample value,
@@ -177,20 +177,20 @@ divided by the sumber of samples.
 This is a measure of the power in an audio signal.
 \end{funcdesc}
 
-\begin{funcdesc}{tomono}{fragment\, width\, lfactor\, rfactor} 
+\begin{funcdesc}{tomono}{fragment, width, lfactor, rfactor} 
 Convert a stereo fragment to a mono fragment.  The left channel is
 multiplied by \var{lfactor} and the right channel by \var{rfactor}
 before adding the two channels to give a mono signal.
 \end{funcdesc}
 
-\begin{funcdesc}{tostereo}{fragment\, width\, lfactor\, rfactor}
+\begin{funcdesc}{tostereo}{fragment, width, lfactor, rfactor}
 Generate a stereo fragment from a mono fragment.  Each pair of samples
 in the stereo fragment are computed from the mono sample, whereby left
 channel samples are multiplied by \var{lfactor} and right channel
 samples by \var{rfactor}.
 \end{funcdesc}
 
-\begin{funcdesc}{ulaw2lin}{fragment\, width}
+\begin{funcdesc}{ulaw2lin}{fragment, width}
 Convert sound fragments in ULAW encoding to linearly encoded sound
 fragments.  ULAW encoding always uses 8 bits samples, so \var{width}
 refers only to the sample width of the output fragment here.
diff --git a/Doc/libbasehttp.tex b/Doc/libbasehttp.tex
index 12d9483..2a4a7d0 100644
--- a/Doc/libbasehttp.tex
+++ b/Doc/libbasehttp.tex
@@ -157,7 +157,7 @@ followed by text composed using the \member{error_message_format}
 class variable.
 \end{funcdesc}
 
-\begin{funcdesc}{send_response}{code\optional{\, message}}
+\begin{funcdesc}{send_response}{code\optional{, message}}
 Sends a response header and logs the accepted request. The HTTP
 response line is sent, followed by \emph{Server} and \emph{Date}
 headers. The values for these two headers are picked up from the
@@ -165,7 +165,7 @@ headers. The values for these two headers are picked up from the
 respectively.
 \end{funcdesc}
 
-\begin{funcdesc}{send_header}{keyword\, value}
+\begin{funcdesc}{send_header}{keyword, value}
 Writes a specific MIME header to the output stream. \var{keyword}
 should specify the header keyword, with \var{value} specifying
 its value.
@@ -176,7 +176,7 @@ Sends a blank line, indicating the end of the MIME headers in
 the response.
 \end{funcdesc}
 
-\begin{funcdesc}{log_request}{\optional{code\optional{\, size}}}
+\begin{funcdesc}{log_request}{\optional{code\optional{, size}}}
 Logs an accepted (successful) request. \var{code} should specify
 the numeric HTTP code associated with the response. If a size of
 the response is available, then it should be passed as the
diff --git a/Doc/libbastion.tex b/Doc/libbastion.tex
index 7b7cba6..c405c64 100644
--- a/Doc/libbastion.tex
+++ b/Doc/libbastion.tex
@@ -17,7 +17,7 @@ other, unsafe attributes.
 
 % I've punted on the issue of documenting keyword arguments for now.
 
-\begin{funcdesc}{Bastion}{object\optional{\, filter\, name\, class}}
+\begin{funcdesc}{Bastion}{object\optional{, filter, name, class}}
 Protect the object \var{object}, returning a bastion for the
 object.  Any attempt to access one of the object's attributes will
 have to be approved by the \var{filter} function; if the access is
diff --git a/Doc/libbinhex.tex b/Doc/libbinhex.tex
index aae5074..560b401 100644
--- a/Doc/libbinhex.tex
+++ b/Doc/libbinhex.tex
@@ -11,14 +11,14 @@ The \code{binhex} module defines the following functions:
 
 \setindexsubitem{(in module binhex)}
 
-\begin{funcdesc}{binhex}{input\, output}
+\begin{funcdesc}{binhex}{input, output}
 Convert a binary file with filename \var{input} to binhex file
 \var{output}. The \var{output} parameter can either be a filename or a
 file-like object (any object supporting a \var{write} and \var{close}
 method).
 \end{funcdesc}
 
-\begin{funcdesc}{hexbin}{input\optional{\, output}}
+\begin{funcdesc}{hexbin}{input\optional{, output}}
 Decode a binhex file \var{input}. \var{input} may be a filename or a
 file-like object supporting \var{read} and \var{close} methods.
 The resulting file is written to a file named \var{output}, unless the
diff --git a/Doc/libcgi.tex b/Doc/libcgi.tex
index fa2b6b7..55abd10 100644
--- a/Doc/libcgi.tex
+++ b/Doc/libcgi.tex
@@ -191,7 +191,7 @@ Parse a query string given as a string argument (data of type
 \mimetype{application/x-www-form-urlencoded}).
 \end{funcdesc}
 
-\begin{funcdesc}{parse_multipart}{fp\, pdict}
+\begin{funcdesc}{parse_multipart}{fp, pdict}
 Parse input of type \mimetype{multipart/form-data} (for 
 file uploads).  Arguments are \var{fp} for the input file and
 \var{pdict} for the dictionary containing other parameters of
@@ -236,7 +236,7 @@ Print a list of useful (used by CGI) environment variables in
 HTML.
 \end{funcdesc}
 
-\begin{funcdesc}{escape}{s\optional{\, quote}}
+\begin{funcdesc}{escape}{s\optional{, quote}}
 Convert the characters
 \character{\&}, \character{<} and \character{>} in string \var{s} to
 HTML-safe sequences.  Use this if you need to display text that might
diff --git a/Doc/libcrypt.tex b/Doc/libcrypt.tex
index 777f87e..a4c0bb7 100644
--- a/Doc/libcrypt.tex
+++ b/Doc/libcrypt.tex
@@ -10,7 +10,7 @@ attempting to crack \UNIX{} passwords with a dictionary.
 \index{crypt(3)}
 
 \setindexsubitem{(in module crypt)}
-\begin{funcdesc}{crypt}{word\, salt} 
+\begin{funcdesc}{crypt}{word, salt} 
 \var{word} will usually be a user's password.  \var{salt} is a
 2-character string which will be used to select one of 4096 variations
 of DES\indexii{cipher}{DES}.  The characters in \var{salt} must be
diff --git a/Doc/libctb.tex b/Doc/libctb.tex
index 36d1289..cd8c72c 100644
--- a/Doc/libctb.tex
+++ b/Doc/libctb.tex
@@ -34,7 +34,7 @@ Bits in the status as returned by \var{Status}.
 Return 1 if the communication toolbox is available, zero otherwise.
 \end{funcdesc}
 
-\begin{funcdesc}{CMNew}{name\, sizes}
+\begin{funcdesc}{CMNew}{name, sizes}
 Create a connection object using the connection tool named
 \var{name}. \var{sizes} is a 6-tuple given buffer sizes for data in,
 data out, control in, control out, attention in and attention out.
@@ -77,21 +77,21 @@ Accept (when \var{yesno} is non-zero) or reject an incoming call after
 \var{Listen} returned.
 \end{funcdesc}
 
-\begin{funcdesc}{Close}{timeout\, now}
+\begin{funcdesc}{Close}{timeout, now}
 Close a connection. When \var{now} is zero, the close is orderly
 (i.e.\ outstanding output is flushed, etc.)\ with a timeout of
 \var{timeout} seconds. When \var{now} is non-zero the close is
 immediate, discarding output.
 \end{funcdesc}
 
-\begin{funcdesc}{Read}{len\, chan\, timeout}
+\begin{funcdesc}{Read}{len, chan, timeout}
 Read \var{len} bytes, or until \var{timeout} seconds have passed, from
 the channel \var{chan} (which is one of \var{cmData}, \var{cmCntl} or
 \var{cmAttn}). Return a 2-tuple:\ the data read and the end-of-message
 flag.
 \end{funcdesc}
 
-\begin{funcdesc}{Write}{buf\, chan\, timeout\, eom}
+\begin{funcdesc}{Write}{buf, chan, timeout, eom}
 Write \var{buf} to channel \var{chan}, aborting after \var{timeout}
 seconds. When \var{eom} has the value \var{cmFlagsEOM} an
 end-of-message indicator will be written after the data (if this
diff --git a/Doc/libdbm.tex b/Doc/libdbm.tex
index 416a6b0..35e0b4c 100644
--- a/Doc/libdbm.tex
+++ b/Doc/libdbm.tex
@@ -20,7 +20,7 @@ Raised on dbm-specific errors, such as I/O errors. \code{KeyError} is
 raised for general mapping errors like specifying an incorrect key.
 \end{excdesc}
 
-\begin{funcdesc}{open}{filename\, \optional{flag\, \optional{mode}}}
+\begin{funcdesc}{open}{filename, \optional{flag, \optional{mode}}}
 Open a dbm database and return a dbm object.  The \var{filename}
 argument is the name of the database file (without the \file{.dir} or
 \file{.pag} extensions).
diff --git a/Doc/libdis.tex b/Doc/libdis.tex
index b4c74fb..e11a1f6 100644
--- a/Doc/libdis.tex
+++ b/Doc/libdis.tex
@@ -49,7 +49,7 @@ traceback if none was passed.  The instruction causing the exception
 is indicated.
 \end{funcdesc}
 
-\begin{funcdesc}{disassemble}{code\optional{\, lasti}}
+\begin{funcdesc}{disassemble}{code\optional{, lasti}}
 Disassembles a code object, indicating the last instruction if \var{lasti}
 was provided.  The output is divided in the following columns:
 \begin{itemize}
@@ -65,7 +65,7 @@ variable names, constant values, branch targets, and compare
 operators.
 \end{funcdesc}
 
-\begin{funcdesc}{disco}{code\optional{\, lasti}}
+\begin{funcdesc}{disco}{code\optional{, lasti}}
 A synonym for disassemble.  It is more convenient to type, and kept
 for compatibility with earlier Python releases.
 \end{funcdesc}
diff --git a/Doc/libformatter.tex b/Doc/libformatter.tex
index 8c9ab3e..5d06995 100644
--- a/Doc/libformatter.tex
+++ b/Doc/libformatter.tex
@@ -66,7 +66,7 @@ Add a hard line break if one does not already exist.  This does not
 break the logical paragraph.
 \end{funcdesc}
 
-\begin{funcdesc}{add_hor_rule}{*args\, **kw}
+\begin{funcdesc}{add_hor_rule}{*args, **kw}
 Insert a horizontal rule in the output.  A hard break is inserted if
 there is data in the current paragraph, but the logical paragraph is
 not broken.  The arguments and keywords are passed on to the writer's
@@ -268,7 +268,7 @@ lines, or the equivelent.  The \var{blankline} value will be an
 integer.
 \end{funcdesc}
 
-\begin{funcdesc}{send_hor_rule}{*args\, **kw}
+\begin{funcdesc}{send_hor_rule}{*args, **kw}
 Display a horizontal rule on the output device.  The arguments to this
 method are entirely application- and writer-specific, and should be
 interpreted with care.  The method implementation may assume that a
@@ -317,7 +317,7 @@ else.  Each method simply announces itself by printing its name and
 arguments on standard output.
 \end{classdesc}
 
-\begin{classdesc}{DumbWriter}{\optional{file\optional{\, maxcol\code{ = 72}}}}
+\begin{classdesc}{DumbWriter}{\optional{file\optional{, maxcol\code{ = 72}}}}
 Simple writer class which writes output on the file object passed in
 as \var{file} or, if \var{file} is omitted, on standard output.  The
 output is simply word-wrapped to the number of columns specified by
diff --git a/Doc/libframework.tex b/Doc/libframework.tex
index 012b8c5..6b8c5fa 100644
--- a/Doc/libframework.tex
+++ b/Doc/libframework.tex
@@ -31,14 +31,14 @@ An object representing the menubar. This object is usually not created
 by the user.
 \end{funcdesc}
 
-\begin{funcdesc}{Menu}{bar\, title\optional{\, after}}
+\begin{funcdesc}{Menu}{bar, title\optional{, after}}
 An object representing a menu. Upon creation you pass the
 \code{MenuBar} the menu appears in, the \var{title} string and a
 position (1-based) \var{after} where the menu should appear (default:
 at the end).
 \end{funcdesc}
 
-\begin{funcdesc}{MenuItem}{menu\, title\optional{\, shortcut\, callback}}
+\begin{funcdesc}{MenuItem}{menu, title\optional{, shortcut, callback}}
 Create a menu item object. The arguments are the menu to crate the
 item it, the item title string and optionally the keyboard shortcut
 and a callback routine. The callback is called with the arguments
@@ -58,7 +58,7 @@ correct dimming for all menu items based on the current front window.
 Add a separator to the end of a menu.
 \end{funcdesc}
 
-\begin{funcdesc}{SubMenu}{menu\, label}
+\begin{funcdesc}{SubMenu}{menu, label}
 Create a submenu named \var{label} under menu \var{menu}. The menu
 object is returned.
 \end{funcdesc}
@@ -72,7 +72,7 @@ which the window belongs. The window is not displayed until later.
 Creates a modeless dialog window.
 \end{funcdesc}
 
-\begin{funcdesc}{windowbounds}{width\, height}
+\begin{funcdesc}{windowbounds}{width, height}
 Return a \code{(left, top, right, bottom)} tuple suitable for creation
 of a window of given width and height. The window will be staggered
 with respect to previous windows, and an attempt is made to keep the
@@ -104,7 +104,7 @@ application. Alternatively, override the \code{do_about} method for
 more elaborate about messages.
 \end{funcdesc}
 
-\begin{funcdesc}{mainloop}{\optional{mask\, wait}}
+\begin{funcdesc}{mainloop}{\optional{mask, wait}}
 This routine is the main event loop, call it to set your application
 rolling. \var{Mask} is the mask of events you want to handle,
 \var{wait} is the number of ticks you want to leave to other
@@ -145,7 +145,7 @@ The old on/off value is returned.
 Terminate the event \code{mainloop} at the next convenient moment.
 \end{funcdesc}
 
-\begin{funcdesc}{do_char}{c\, event}
+\begin{funcdesc}{do_char}{c, event}
 The user typed character \var{c}. The complete details of the event
 can be found in the \var{event} structure. This method can also be
 provided in a \code{Window} object, which overrides the
@@ -181,22 +181,22 @@ Override this method to do any special processing on window
 close. Call \code{self.do_postclose} to cleanup the parent state.
 \end{funcdesc}
 
-\begin{funcdesc}{do_postresize}{width\, height\, macoswindowid}
+\begin{funcdesc}{do_postresize}{width, height, macoswindowid}
 Called after the window is resized. Override if more needs to be done
 than calling \code{InvalRect}.
 \end{funcdesc}
 
-\begin{funcdesc}{do_contentclick}{local\, modifiers\, event}
+\begin{funcdesc}{do_contentclick}{local, modifiers, event}
 The user clicked in the content part of a window. The arguments are
 the coordinates (window-relative), the key modifiers and the raw
 event.
 \end{funcdesc}
 
-\begin{funcdesc}{do_update}{macoswindowid\, event}
+\begin{funcdesc}{do_update}{macoswindowid, event}
 An update event for the window was received. Redraw the window.
 \end{funcdesc}
 
-\begin{funcdesc}{do_activate}{activate\, event}
+\begin{funcdesc}{do_activate}{activate, event}
 The window was activated (\code{activate==1}) or deactivated
 (\code{activate==0}). Handle things like focus highlighting, etc.
 \end{funcdesc}
@@ -208,7 +208,7 @@ ControlsWindow objects have the following methods besides those of
 
 \setindexsubitem{(ControlsWindow method)}
 
-\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event}
+\begin{funcdesc}{do_controlhit}{window, control, pcode, event}
 Part \code{pcode} of control \code{control} was hit by the
 user. Tracking and such has already been taken care of.
 \end{funcdesc}
@@ -220,7 +220,7 @@ extra methods:
 
 \setindexsubitem{(ScrolledWindow method)}
 
-\begin{funcdesc}{scrollbars}{\optional{wantx\, wanty}}
+\begin{funcdesc}{scrollbars}{\optional{wantx, wanty}}
 Create (or destroy) horizontal and vertical scrollbars. The arguments
 specify which you want (default: both). The scrollbars always have
 minimum \code{0} and maximum \code{32767}.
@@ -238,32 +238,32 @@ Call this method when the document has changed. It will call
 \code{getscrollbarvalues} and update the scrollbars.
 \end{funcdesc}
 
-\begin{funcdesc}{scrollbar_callback}{which\, what\, value}
+\begin{funcdesc}{scrollbar_callback}{which, what, value}
 Supplied by you and called after user interaction. \code{Which} will
 be \code{'x'} or \code{'y'}, \code{what} will be \code{'-'},
 \code{'--'}, \code{'set'}, \code{'++'} or \code{'+'}. For
 \code{'set'}, \code{value} will contain the new scrollbar position.
 \end{funcdesc}
 
-\begin{funcdesc}{scalebarvalues}{absmin\, absmax\, curmin\, curmax}
+\begin{funcdesc}{scalebarvalues}{absmin, absmax, curmin, curmax}
 Auxiliary method to help you calculate values to return from
 \code{getscrollbarvalues}. You pass document minimum and maximum value
 and topmost (leftmost) and bottommost (rightmost) visible values and
 it returns the correct number or \code{None}.
 \end{funcdesc}
 
-\begin{funcdesc}{do_activate}{onoff\, event}
+\begin{funcdesc}{do_activate}{onoff, event}
 Takes care of dimming/highlighting scrollbars when a window becomes
 frontmost vv. If you override this method call this one at the end of
 your method.
 \end{funcdesc}
 
-\begin{funcdesc}{do_postresize}{width\, height\, window}
+\begin{funcdesc}{do_postresize}{width, height, window}
 Moves scrollbars to the correct position. Call this method initially
 if you override it.
 \end{funcdesc}
 
-\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event}
+\begin{funcdesc}{do_controlhit}{window, control, pcode, event}
 Handles scrollbar interaction. If you override it call this method
 first, a nonzero return value indicates the hit was in the scrollbars
 and has been handled.
@@ -281,7 +281,7 @@ Create the dialog window, from the DLOG resource with id
 \var{resid}. The dialog object is stored in \code{self.wid}.
 \end{funcdesc}
 
-\begin{funcdesc}{do_itemhit}{item\, event}
+\begin{funcdesc}{do_itemhit}{item, event}
 Item number \var{item} was hit. You are responsible for redrawing
 toggle buttons, etc.
 \end{funcdesc}
diff --git a/Doc/libfuncs.tex b/Doc/libfuncs.tex
index d00ba10..e914e80 100644
--- a/Doc/libfuncs.tex
+++ b/Doc/libfuncs.tex
@@ -54,7 +54,7 @@ find the \code{eggs} variable.
   complex number, its magnitude is returned.
 \end{funcdesc}
 
-\begin{funcdesc}{apply}{function\, args\optional{, keywords}}
+\begin{funcdesc}{apply}{function, args\optional{, keywords}}
 The \var{function} argument must be a callable object (a user-defined or
 built-in function or method, or a class object) and the \var{args}
 argument must be a tuple.  The \var{function} is called with
@@ -82,20 +82,20 @@ class instances are callable if they have a \method{__call__()} method.
   inclusive.
 \end{funcdesc}
 
-\begin{funcdesc}{cmp}{x\, y}
+\begin{funcdesc}{cmp}{x, y}
   Compare the two objects \var{x} and \var{y} and return an integer
   according to the outcome.  The return value is negative if \code{\var{x}
   < \var{y}}, zero if \code{\var{x} == \var{y}} and strictly positive if
   \code{\var{x} > \var{y}}.
 \end{funcdesc}
 
-\begin{funcdesc}{coerce}{x\, y}
+\begin{funcdesc}{coerce}{x, y}
   Return a tuple consisting of the two numeric arguments converted to
   a common type, using the same rules as used by arithmetic
   operations.
 \end{funcdesc}
 
-\begin{funcdesc}{compile}{string\, filename\, kind}
+\begin{funcdesc}{compile}{string, filename, kind}
   Compile the \var{string} into a code object.  Code objects can be
   executed by an \keyword{exec} statement or evaluated by a call to
   \function{eval()}.  The \var{filename} argument should
@@ -117,7 +117,7 @@ class instances are callable if they have a \method{__call__()} method.
   \function{long()} and \function{float()}.
 \end{funcdesc}
 
-\begin{funcdesc}{delattr}{object\, name}
+\begin{funcdesc}{delattr}{object, name}
   This is a relative of \function{setattr()}.  The arguments are an
   object and a string.  The string must be the name
   of one of the object's attributes.  The function deletes
@@ -146,7 +146,7 @@ class instances are callable if they have a \method{__call__()} method.
 \end{verbatim}
 \end{funcdesc}
 
-\begin{funcdesc}{divmod}{a\, b}
+\begin{funcdesc}{divmod}{a, b}
   Take two numbers as arguments and return a pair of numbers consisting
   of their quotient and remainder when using long division.  With mixed
   operand types, the rules for binary arithmetic operators apply.  For
@@ -156,7 +156,7 @@ class instances are callable if they have a \method{__call__()} method.
   \code{(math.floor(\var{a} / \var{b}), \var{a} \%{} \var{b})}.
 \end{funcdesc}
 
-\begin{funcdesc}{eval}{expression\optional{\, globals\optional{\, locals}}}
+\begin{funcdesc}{eval}{expression\optional{, globals\optional{, locals}}}
   The arguments are a string and two optional dictionaries.  The
   \var{expression} argument is parsed and evaluated as a Python
   expression (technically speaking, a condition list) using the
@@ -188,7 +188,7 @@ class instances are callable if they have a \method{__call__()} method.
   \function{execfile()}.
 \end{funcdesc}
 
-\begin{funcdesc}{execfile}{file\optional{\, globals\optional{\, locals}}}
+\begin{funcdesc}{execfile}{file\optional{, globals\optional{, locals}}}
   This function is similar to the
   \keyword{exec} statement, but parses a file instead of a string.  It
   is different from the \keyword{import} statement in that it does not
@@ -206,7 +206,7 @@ class instances are callable if they have a \method{__call__()} method.
   \code{None}.
 \end{funcdesc}
 
-\begin{funcdesc}{filter}{function\, list}
+\begin{funcdesc}{filter}{function, list}
 Construct a list from those elements of \var{list} for which
 \var{function} returns true.  If \var{list} is a string or a tuple,
 the result also has that type; otherwise it is always a list.  If
@@ -226,7 +226,7 @@ removed.
   returned.
 \end{funcdesc}
 
-\begin{funcdesc}{getattr}{object\, name}
+\begin{funcdesc}{getattr}{object, name}
   The arguments are an object and a string.  The string must be the
   name of one of the object's attributes.  The result is the value of
   that attribute.  For example, \code{getattr(\var{x},
@@ -240,7 +240,7 @@ function or method, this is the module where it is defined, not the
 module from which it is called).
 \end{funcdesc}
 
-\begin{funcdesc}{hasattr}{object\, name}
+\begin{funcdesc}{hasattr}{object, name}
   The arguments are an object and a string.  The result is 1 if the
   string is the name of one of the object's attributes, 0 if not.
   (This is implemented by calling \code{getattr(\var{object},
@@ -355,7 +355,7 @@ desired effect.
   see the description of \function{int()}.
 \end{funcdesc}
 
-\begin{funcdesc}{map}{function\, list\, ...}
+\begin{funcdesc}{map}{function, list, ...}
 Apply \var{function} to every item of \var{list} and return a list
 of the results.  If additional \var{list} arguments are passed, 
 \var{function} must take that many arguments and is applied to
@@ -388,7 +388,7 @@ any kind of sequence; the result is always a list.
   \exception{OverflowError} exception.
 \end{funcdesc}
 
-\begin{funcdesc}{open}{filename\optional{\, mode\optional{\, bufsize}}}
+\begin{funcdesc}{open}{filename\optional{, mode\optional{, bufsize}}}
   Return a new file object (described earlier under Built-in Types).
   The first two arguments are the same as for \code{stdio}'s
   \cfunction{fopen()}: \var{filename} is the file name to be opened,
@@ -423,7 +423,7 @@ there's no reliable way to determine whether this is the case.}
   \function{chr()}.
 \end{funcdesc}
 
-\begin{funcdesc}{pow}{x\, y\optional{\, z}}
+\begin{funcdesc}{pow}{x, y\optional{, z}}
   Return \var{x} to the power \var{y}; if \var{z} is present, return
   \var{x} to the power \var{y}, modulo \var{z} (computed more
   efficiently than \code{pow(\var{x}, \var{y}) \% \var{z}}).
@@ -435,7 +435,7 @@ there's no reliable way to determine whether this is the case.}
   35000)} is not allowed.
 \end{funcdesc}
 
-\begin{funcdesc}{range}{\optional{start\,} stop\optional{\, step}}
+\begin{funcdesc}{range}{\optional{start,} stop\optional{, step}}
   This is a versatile function to create lists containing arithmetic
   progressions.  It is most often used in \keyword{for} loops.  The
   arguments must be plain integers.  If the \var{step} argument is
@@ -487,7 +487,7 @@ If the \module{readline} module was loaded, then
 line editing and history features.
 \end{funcdesc}
 
-\begin{funcdesc}{reduce}{function\, list\optional{\, initializer}}
+\begin{funcdesc}{reduce}{function, list\optional{, initializer}}
 Apply the binary \var{function} to the items of \var{list} so as to
 reduce the list to a single value.  E.g.,
 \code{reduce(lambda x, y: x*y, \var{list}, 1)} returns the product of
@@ -551,7 +551,7 @@ to return a string that would yield an object with the same value
 when passed to \function{eval()}.
 \end{funcdesc}
 
-\begin{funcdesc}{round}{x\, n}
+\begin{funcdesc}{round}{x, n}
   Return the floating point value \var{x} rounded to \var{n} digits
   after the decimal point.  If \var{n} is omitted, it defaults to zero.
   The result is a floating point number.  Values are rounded to the
@@ -560,7 +560,7 @@ when passed to \function{eval()}.
   \code{round(0.5)} is \code{1.0} and \code{round(-0.5)} is \code{-1.0}).
 \end{funcdesc}
 
-\begin{funcdesc}{setattr}{object\, name\, value}
+\begin{funcdesc}{setattr}{object, name, value}
   This is the counterpart of \function{getattr()}.  The arguments are an
   object, a string and an arbitrary value.  The string must be the name
   of one of the object's attributes.  The function assigns the value to
@@ -569,7 +569,7 @@ when passed to \function{eval()}.
   \code{\var{x}.\var{foobar} = 123}.
 \end{funcdesc}
 
-\begin{funcdesc}{slice}{\optional{start\,} stop\optional{\, step}}
+\begin{funcdesc}{slice}{\optional{start,} stop\optional{, step}}
 Return a slice object representing the set of indices specified by
 \code{range(\var{start}, \var{stop}, \var{step})}.  The \var{start}
 and \var{step} arguments default to None.  Slice objects have
@@ -623,7 +623,7 @@ cannot normally be affected this way, but variables retrieved from
 other scopes (e.g. modules) can be.  This may change.}
 \end{funcdesc}
 
-\begin{funcdesc}{xrange}{\optional{start\,} stop\optional{\, step}}
+\begin{funcdesc}{xrange}{\optional{start,} stop\optional{, step}}
 This function is very similar to \function{range()}, but returns an
 ``xrange object'' instead of a list.  This is an opaque sequence type
 which yields the same values as the corresponding list, without
diff --git a/Doc/libgdbm.tex b/Doc/libgdbm.tex
index 73fc9ab..08d447f 100644
--- a/Doc/libgdbm.tex
+++ b/Doc/libgdbm.tex
@@ -35,7 +35,7 @@ Raised on \code{gdbm}-specific errors, such as I/O errors. \code{KeyError} is
 raised for general mapping errors like specifying an incorrect key.
 \end{excdesc}
 
-\begin{funcdesc}{open}{filename\, \optional{flag\, \optional{mode}}}
+\begin{funcdesc}{open}{filename, \optional{flag, \optional{mode}}}
 Open a \code{gdbm} database and return a \code{gdbm} object.  The
 \var{filename} argument is the name of the database file.
 
diff --git a/Doc/libgl.tex b/Doc/libgl.tex
index b694d86..7208695 100644
--- a/Doc/libgl.tex
+++ b/Doc/libgl.tex
@@ -119,7 +119,7 @@ Similar to
 but the pairs have the point first and the normal second.
 \end{funcdesc}
 
-\begin{funcdesc}{nurbssurface}{s_k\, t_k\, ctl\, s_ord\, t_ord\, type}
+\begin{funcdesc}{nurbssurface}{s_k, t_k, ctl, s_ord, t_ord, type}
 % XXX s_k[], t_k[], ctl[][]
 Defines a nurbs surface.
 The dimensions of
@@ -129,13 +129,13 @@ are computed as follows:
 \code{[len(\var{t_k}) - \var{t_ord}]}.
 \end{funcdesc}
 
-\begin{funcdesc}{nurbscurve}{knots\, ctlpoints\, order\, type}
+\begin{funcdesc}{nurbscurve}{knots, ctlpoints, order, type}
 Defines a nurbs curve.
 The length of ctlpoints is
 \code{len(\var{knots}) - \var{order}}.
 \end{funcdesc}
 
-\begin{funcdesc}{pwlcurve}{points\, type}
+\begin{funcdesc}{pwlcurve}{points, type}
 Defines a piecewise-linear curve.
 \var{points}
 is a list of points.
diff --git a/Doc/libhtmllib.tex b/Doc/libhtmllib.tex
index c3c9c9f..dff837c 100644
--- a/Doc/libhtmllib.tex
+++ b/Doc/libhtmllib.tex
@@ -86,7 +86,7 @@ affects the operation of \method{handle_data()} and \method{save_end()}.
 
 \setindexsubitem{(HTMLParser method)}
 
-\begin{funcdesc}{anchor_bgn}{href\, name\, type}
+\begin{funcdesc}{anchor_bgn}{href, name, type}
 This method is called at the start of an anchor region.  The arguments
 correspond to the attributes of the \code{<A>} tag with the same
 names.  The default implementation maintains a list of hyperlinks
@@ -100,7 +100,7 @@ implementation adds a textual footnote marker using an index into the
 list of hyperlinks created by \method{anchor_bgn()}.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_image}{source\, alt\optional{\, ismap\optional{\, align\optional{\, width\optional{\, height}}}}}
+\begin{funcdesc}{handle_image}{source, alt\optional{, ismap\optional{, align\optional{, width\optional{, height}}}}}
 This method is called to handle images.  The default implementation
 simply passes the \var{alt} value to the \method{handle_data()}
 method.
diff --git a/Doc/libimageop.tex b/Doc/libimageop.tex
index e5d494d..4a93487 100644
--- a/Doc/libimageop.tex
+++ b/Doc/libimageop.tex
@@ -17,7 +17,7 @@ per pixel, etc.
 \end{excdesc}
 
 
-\begin{funcdesc}{crop}{image\, psize\, width\, height\, x0\, y0\, x1\, y1}
+\begin{funcdesc}{crop}{image, psize, width, height, x0, y0, x1, y1}
 Return the selected part of \var{image}, which should by
 \var{width} by \var{height} in size and consist of pixels of
 \var{psize} bytes. \var{x0}, \var{y0}, \var{x1} and \var{y1} are like
@@ -28,14 +28,14 @@ that fall outside the old image will have their value set to zero.  If
 holds for the y coordinates.
 \end{funcdesc}
 
-\begin{funcdesc}{scale}{image\, psize\, width\, height\, newwidth\, newheight}
+\begin{funcdesc}{scale}{image, psize, width, height, newwidth, newheight}
 Return \var{image} scaled to size \var{newwidth} by \var{newheight}.
 No interpolation is done, scaling is done by simple-minded pixel
 duplication or removal.  Therefore, computer-generated images or
 dithered images will not look nice after scaling.
 \end{funcdesc}
 
-\begin{funcdesc}{tovideo}{image\, psize\, width\, height}
+\begin{funcdesc}{tovideo}{image, psize, width, height}
 Run a vertical low-pass filter over an image.  It does so by computing
 each destination pixel as the average of two vertically-aligned source
 pixels.  The main use of this routine is to forestall excessive
@@ -43,18 +43,18 @@ flicker if the image is displayed on a video device that uses
 interlacing, hence the name.
 \end{funcdesc}
 
-\begin{funcdesc}{grey2mono}{image\, width\, height\, threshold}
+\begin{funcdesc}{grey2mono}{image, width, height, threshold}
 Convert a 8-bit deep greyscale image to a 1-bit deep image by
 tresholding all the pixels.  The resulting image is tightly packed and
 is probably only useful as an argument to \code{mono2grey}.
 \end{funcdesc}
 
-\begin{funcdesc}{dither2mono}{image\, width\, height}
+\begin{funcdesc}{dither2mono}{image, width, height}
 Convert an 8-bit greyscale image to a 1-bit monochrome image using a
 (simple-minded) dithering algorithm.
 \end{funcdesc}
 
-\begin{funcdesc}{mono2grey}{image\, width\, height\, p0\, p1}
+\begin{funcdesc}{mono2grey}{image, width, height, p0, p1}
 Convert a 1-bit monochrome image to an 8 bit greyscale or color image.
 All pixels that are zero-valued on input get value \var{p0} on output
 and all one-value input pixels get value \var{p1} on output.  To
@@ -62,26 +62,26 @@ convert a monochrome black-and-white image to greyscale pass the
 values \code{0} and \code{255} respectively.
 \end{funcdesc}
 
-\begin{funcdesc}{grey2grey4}{image\, width\, height}
+\begin{funcdesc}{grey2grey4}{image, width, height}
 Convert an 8-bit greyscale image to a 4-bit greyscale image without
 dithering.
 \end{funcdesc}
 
-\begin{funcdesc}{grey2grey2}{image\, width\, height}
+\begin{funcdesc}{grey2grey2}{image, width, height}
 Convert an 8-bit greyscale image to a 2-bit greyscale image without
 dithering.
 \end{funcdesc}
 
-\begin{funcdesc}{dither2grey2}{image\, width\, height}
+\begin{funcdesc}{dither2grey2}{image, width, height}
 Convert an 8-bit greyscale image to a 2-bit greyscale image with
 dithering.  As for \code{dither2mono}, the dithering algorithm is
 currently very simple.
 \end{funcdesc}
 
-\begin{funcdesc}{grey42grey}{image\, width\, height}
+\begin{funcdesc}{grey42grey}{image, width, height}
 Convert a 4-bit greyscale image to an 8-bit greyscale image.
 \end{funcdesc}
 
-\begin{funcdesc}{grey22grey}{image\, width\, height}
+\begin{funcdesc}{grey22grey}{image, width, height}
 Convert a 2-bit greyscale image to an 8-bit greyscale image.
 \end{funcdesc}
diff --git a/Doc/libimgfile.tex b/Doc/libimgfile.tex
index 098d59b..8ec31e3 100644
--- a/Doc/libimgfile.tex
+++ b/Doc/libimgfile.tex
@@ -30,7 +30,7 @@ the string. This format is suitable to pass to \code{gl.lrectwrite},
 for instance.
 \end{funcdesc}
 
-\begin{funcdesc}{readscaled}{file\, x\, y\, filter\optional{\, blur}}
+\begin{funcdesc}{readscaled}{file, x, y, filter\optional{, blur}}
 This function is identical to read but it returns an image that is
 scaled to the given \var{x} and \var{y} sizes. If the \var{filter} and
 \var{blur} parameters are omitted scaling is done by
@@ -55,7 +55,7 @@ compatible with SGI GL) or from top to bottom(flag is one,
 compatible with X).  The default is zero.
 \end{funcdesc}
 
-\begin{funcdesc}{write}{file\, data\, x\, y\, z}
+\begin{funcdesc}{write}{file, data, x, y, z}
 This function writes the RGB or greyscale data in \var{data} to image
 file \var{file}. \var{x} and \var{y} give the size of the image,
 \var{z} is 1 for 1 byte greyscale images or 3 for RGB images (which are
diff --git a/Doc/libimp.tex b/Doc/libimp.tex
index 0d0bccc..5664c81 100644
--- a/Doc/libimp.tex
+++ b/Doc/libimp.tex
@@ -188,7 +188,7 @@ shared libraries is highly system dependent, and not all systems
 support it.)
 \end{funcdesc}
 
-\begin{funcdesc}{load_source}{name\, pathname\, file}
+\begin{funcdesc}{load_source}{name, pathname, file}
 Load and initialize a module implemented as a Python source file and
 return its module object.  If the module was already initialized, it
 will be initialized \emph{again}.  The \var{name} argument is used to
diff --git a/Doc/libmacconsole.tex b/Doc/libmacconsole.tex
index bd601b9..1916025 100644
--- a/Doc/libmacconsole.tex
+++ b/Doc/libmacconsole.tex
@@ -95,7 +95,7 @@ displayed in inverse video (this disables the upper half of a
 non-\ASCII{} character set).
 \end{funcdesc}
 
-\begin{funcdesc}{gotoxy}{x\, y}
+\begin{funcdesc}{gotoxy}{x, y}
 Set the cursor to position \code{(\var{x}, \var{y})}.
 \end{funcdesc}
 
diff --git a/Doc/libmacfs.tex b/Doc/libmacfs.tex
index 647e004..5373d31 100644
--- a/Doc/libmacfs.tex
+++ b/Doc/libmacfs.tex
@@ -2,16 +2,16 @@
 \label{module-macfs}
 \bimodindex{macfs}
 
-\setindexsubitem{(in module macfs)}
 
-This module provides access to macintosh FSSpec handling, the Alias
+This module provides access to Macintosh FSSpec handling, the Alias
 Manager, finder aliases and the Standard File package.
 
 Whenever a function or method expects a \var{file} argument, this
 argument can be one of three things:\ (1) a full or partial Macintosh
-pathname, (2) an FSSpec object or (3) a 3-tuple \code{(wdRefNum,
-parID, name)} as described in Inside Mac VI\@. A description of aliases
-and the standard file package can also be found there.
+pathname, (2) an FSSpec object or (3) a 3-tuple \code{(\var{wdRefNum},
+\var{parID}, \var{name})} as described in \emph{Inside Macintosh
+VI}\@. A description of aliases and the standard file package can also
+be found there.
 
 \begin{funcdesc}{FSSpec}{file}
 Create an FSSpec object for the specified file.
@@ -41,7 +41,7 @@ Resolve an alias file. Returns a 3-tuple \code{(\var{fsspec}, \var{isfolder},
 (otherwise the FSSpec object for the file itself is returned).
 \end{funcdesc}
 
-\begin{funcdesc}{StandardGetFile}{\optional{type\, ...}}
+\begin{funcdesc}{StandardGetFile}{\optional{type, ...}}
 Present the user with a standard ``open input file''
 dialog. Optionally, you can pass up to four 4-char file types to limit
 the files the user can choose from. The function returns an FSSpec
@@ -49,11 +49,11 @@ object and a flag indicating that the user completed the dialog
 without cancelling.
 \end{funcdesc}
 
-\begin{funcdesc}{PromptGetFile}{prompt\optional{\, type\, ...}}
+\begin{funcdesc}{PromptGetFile}{prompt\optional{, type, ...}}
 Similar to \var{StandardGetFile} but allows you to specify a prompt.
 \end{funcdesc}
 
-\begin{funcdesc}{StandardPutFile}{prompt\, \optional{default}}
+\begin{funcdesc}{StandardPutFile}{prompt, \optional{default}}
 Present the user with a standard ``open output file''
 dialog. \var{prompt} is the prompt string, and the optional
 \var{default} argument initializes the output file name. The function
@@ -79,7 +79,7 @@ behaviour with the ``general controls'' controlpanel, thereby making
 this call inoperative.
 \end{funcdesc}
 
-\begin{funcdesc}{FindFolder}{where\, which\, create}
+\begin{funcdesc}{FindFolder}{where, which, create}
 Locates one of the ``special'' folders that MacOS knows about, such as
 the trash or the Preferences folder. \var{Where} is the disk to
 search, \var{which} is the 4-char string specifying which folder to
@@ -133,7 +133,7 @@ Create a minimal alias pointing to this file.
 Return the 4-char creator and type of the file.
 \end{funcdesc}
 
-\begin{funcdesc}{SetCreatorType}{creator\, type}
+\begin{funcdesc}{SetCreatorType}{creator, type}
 Set the 4-char creator and type of the file.
 \end{funcdesc}
 
@@ -151,7 +151,7 @@ Return a tuple with three floating point values representing the
 creation date, modification date and backup date of the file.
 \end{funcdesc}
 
-\begin{funcdesc}{SetDates}{crdate\, moddate\, backupdate}
+\begin{funcdesc}{SetDates}{crdate, moddate, backupdate}
 Set the creation, modification and backup date of the file. The values
 are in the standard floating point format used for times throughout
 Python.
@@ -179,7 +179,7 @@ is returned.
 An interface to the C routine \code{GetAliasInfo()}.
 \end{funcdesc}
 
-\begin{funcdesc}{Update}{file\, \optional{file2}}
+\begin{funcdesc}{Update}{file, \optional{file2}}
 Update the alias to point to the \var{file} given. If \var{file2} is
 present a relative alias will be created.
 \end{funcdesc}
diff --git a/Doc/libmacostools.tex b/Doc/libmacostools.tex
index 1553b11..c4c5842 100644
--- a/Doc/libmacostools.tex
+++ b/Doc/libmacostools.tex
@@ -9,7 +9,7 @@ The \code{macostools} module defines the following functions:
 
 \setindexsubitem{(in module macostools)}
 
-\begin{funcdesc}{copy}{src\, dst\optional{\, createpath, copytimes}}
+\begin{funcdesc}{copy}{src, dst\optional{, createpath, copytimes}}
 Copy file \var{src} to \var{dst}. The files can be specified as
 pathnames or \code{FSSpec} objects. If \var{createpath} is non-zero
 \var{dst} must be a pathname and the folders leading to the
@@ -22,13 +22,13 @@ If the source is an alias the original to which the alias points is
 copied, not the aliasfile.
 \end{funcdesc}
 
-\begin{funcdesc}{copytree}{src\, dst}
+\begin{funcdesc}{copytree}{src, dst}
 Recursively copy a file tree from \var{src} to \var{dst}, creating
 folders as needed. \var{Src} and \var{dst} should be specified as
 pathnames.
 \end{funcdesc}
 
-\begin{funcdesc}{mkalias}{src\, dst}
+\begin{funcdesc}{mkalias}{src, dst}
 Create a finder alias \var{dst} pointing to \var{src}. Both may be
 specified as pathnames or \var{FSSpec} objects.
 \end{funcdesc}
diff --git a/Doc/libmactcp.tex b/Doc/libmactcp.tex
index f041280..122aa5b 100644
--- a/Doc/libmactcp.tex
+++ b/Doc/libmactcp.tex
@@ -78,13 +78,13 @@ Return the TCP address of this side of a connection as a 2-tuple
 \code{(host, port)}, both integers.
 \end{funcdesc}
 
-\begin{funcdesc}{ActiveOpen}{lport\, host\, rport}
+\begin{funcdesc}{ActiveOpen}{lport, host, rport}
 Open an outgoing connection to TCP address \code{(\var{host}, \var{rport})}. Use
 local port \var{lport} (zero makes the system pick a free port). This
 call blocks until the connection has been established.
 \end{funcdesc}
 
-\begin{funcdesc}{Send}{buf\, push\, urgent}
+\begin{funcdesc}{Send}{buf, push, urgent}
 Send data \var{buf} over the connection. \var{Push} and \var{urgent}
 are flags as specified by the TCP standard.
 \end{funcdesc}
@@ -168,7 +168,7 @@ Read a datagram, waiting at most \var{timeout} seconds (-1 is
 infinite).  Return the data.
 \end{funcdesc}
 
-\begin{funcdesc}{Write}{host\, port\, buf}
+\begin{funcdesc}{Write}{host, port, buf}
 Send \var{buf} as a datagram to IP-address \var{host}, port
 \var{port}.
 \end{funcdesc}
diff --git a/Doc/libmacui.tex b/Doc/libmacui.tex
index 546065f..bf8a30f 100644
--- a/Doc/libmacui.tex
+++ b/Doc/libmacui.tex
@@ -18,7 +18,7 @@ most 255 characters long, is displayed. Control is returned when the
 user clicks ``OK''.
 \end{funcdesc}
 
-\begin{funcdesc}{AskString}{prompt\optional{\, default}}
+\begin{funcdesc}{AskString}{prompt\optional{, default}}
 Ask the user to input a string value, in a modal dialog. \var{Prompt}
 is the promt message, the optional \var{default} arg is the initial
 value for the string. All strings can be at most 255 bytes
@@ -26,7 +26,7 @@ long. \var{AskString} returns the string entered or \code{None} in
 case the user cancelled.
 \end{funcdesc}
 
-\begin{funcdesc}{AskYesNoCancel}{question\optional{\, default}}
+\begin{funcdesc}{AskYesNoCancel}{question\optional{, default}}
 Present a dialog with text \var{question} and three buttons labelled
 ``yes'', ``no'' and ``cancel''. Return \code{1} for yes, \code{0} for
 no and \code{-1} for cancel. The default return value chosen by
@@ -34,7 +34,7 @@ hitting return is \code{0}. This can be changed with the optional
 \var{default} argument.
 \end{funcdesc}
 
-\begin{funcdesc}{ProgressBar}{\optional{label\, maxval}}
+\begin{funcdesc}{ProgressBar}{\optional{label, maxval}}
 Display a modeless progress dialog with a thermometer bar. \var{Label}
 is the textstring displayed (default ``Working...''), \var{maxval} is
 the value at which progress is complete (default 100). The returned
diff --git a/Doc/libmailcap.tex b/Doc/libmailcap.tex
index ecc8369..da337bb 100644
--- a/Doc/libmailcap.tex
+++ b/Doc/libmailcap.tex
@@ -17,7 +17,7 @@ Configuration Mechanism For Multimedia Mail Format Information,'' but
 is not an Internet standard.  However, mailcap files are supported on
 most \UNIX{} systems.
 
-\begin{funcdesc}{findmatch}{caps\, MIMEtype\, key\, filename\, plist}
+\begin{funcdesc}{findmatch}{caps, MIMEtype, key, filename, plist}
 Return a 2-tuple; the first element is a string containing the command
 line to be executed
 (which can be passed to \code{os.system()}), and the second element is
diff --git a/Doc/libmimetools.tex b/Doc/libmimetools.tex
index 0ae3af5..0d4e40f 100644
--- a/Doc/libmimetools.tex
+++ b/Doc/libmimetools.tex
@@ -30,18 +30,18 @@ object \var{input} and write the decoded data to open file object
 \code{'base64'}, \code{'quoted-printable'} and \code{'uuencode'}.
 \end{funcdesc}
 
-\begin{funcdesc}{encode}{input\, output\, encoding}
+\begin{funcdesc}{encode}{input, output, encoding}
 Read data from open file object \var{input} and write it encoded using
 the allowed MIME \var{encoding} to open file object \var{output}.
 Valid values for \var{encoding} are the same as for \method{decode()}.
 \end{funcdesc}
 
-\begin{funcdesc}{copyliteral}{input\, output}
+\begin{funcdesc}{copyliteral}{input, output}
 Read lines until \EOF{} from open file \var{input} and write them to
 open file \var{output}.
 \end{funcdesc}
 
-\begin{funcdesc}{copybinary}{input\, output}
+\begin{funcdesc}{copybinary}{input, output}
 Read blocks until \EOF{} from open file \var{input} and write them to
 open file \var{output}.  The block size is currently fixed at 8192.
 \end{funcdesc}
diff --git a/Doc/libminiae.tex b/Doc/libminiae.tex
index 00666fa..d898551 100644
--- a/Doc/libminiae.tex
+++ b/Doc/libminiae.tex
@@ -36,14 +36,14 @@ provide its own windows, etc.
 
 \setindexsubitem{(AEServer method)}
 
-\begin{funcdesc}{installaehandler}{classe\, type\, callback}
+\begin{funcdesc}{installaehandler}{classe, type, callback}
 Installs an AppleEvent handler. \code{Classe} and \code{type} are the
 four-char OSA Class and Type designators, \code{'****'} wildcards are
 allowed. When a matching AppleEvent is received the parameters are
 decoded and your callback is invoked.
 \end{funcdesc}
 
-\begin{funcdesc}{callback}{_object\, **kwargs}
+\begin{funcdesc}{callback}{_object, **kwargs}
 Your callback is called with the OSA Direct Object as first positional
 parameter. The other parameters are passed as keyword arguments, with
 the 4-char designator as name. Three extra keyword parameters are
diff --git a/Doc/libmpz.tex b/Doc/libmpz.tex
index 07b2170..1c4b19f 100644
--- a/Doc/libmpz.tex
+++ b/Doc/libmpz.tex
@@ -37,17 +37,17 @@ A number of \emph{extra} functions are defined in this module. Non
 mpz-arguments are converted to mpz-values first, and the functions
 return mpz-numbers.
 
-\begin{funcdesc}{powm}{base\, exponent\, modulus}
+\begin{funcdesc}{powm}{base, exponent, modulus}
   Return \code{pow(\var{base}, \var{exponent}) \%{} \var{modulus}}. If
   \code{\var{exponent} == 0}, return \code{mpz(1)}. In contrast to the
   \C-library function, this version can handle negative exponents.
 \end{funcdesc}
 
-\begin{funcdesc}{gcd}{op1\, op2}
+\begin{funcdesc}{gcd}{op1, op2}
   Return the greatest common divisor of \var{op1} and \var{op2}.
 \end{funcdesc}
 
-\begin{funcdesc}{gcdext}{a\, b}
+\begin{funcdesc}{gcdext}{a, b}
   Return a tuple \code{(\var{g}, \var{s}, \var{t})}, such that
   \code{\var{a}*\var{s} + \var{b}*\var{t} == \var{g} == gcd(\var{a}, \var{b})}.
 \end{funcdesc}
@@ -61,7 +61,7 @@ return mpz-numbers.
   \code{\var{root}*\var{root} + \var{remainder} == \var{op}}.
 \end{funcdesc}
 
-\begin{funcdesc}{divm}{numerator\, denominator\, modulus}
+\begin{funcdesc}{divm}{numerator, denominator, modulus}
   Returns a number \var{q}. such that
   \code{\var{q} * \var{denominator} \%{} \var{modulus} == \var{numerator}}.
   One could also implement this function in Python, using \code{gcdext}.
diff --git a/Doc/libparser.tex b/Doc/libparser.tex
index cf45b45..ec1bae5 100644
--- a/Doc/libparser.tex
+++ b/Doc/libparser.tex
@@ -153,7 +153,7 @@ converted to parse trees represented as list- or tuple- trees, or may
 be compiled into executable code objects.  Parse trees may be
 extracted with or without line numbering information.
 
-\begin{funcdesc}{ast2list}{ast\optional{\, line_info\code{ = 0}}}
+\begin{funcdesc}{ast2list}{ast\optional{, line_info\code{ = 0}}}
 This function accepts an AST object from the caller in
 \code{\var{ast}} and returns a Python list representing the
 equivelent parse tree.  The resulting list representation can be used
@@ -172,7 +172,7 @@ the line on which the token \emph{ends}.  This information is
 omitted if the flag is false or omitted.
 \end{funcdesc}
 
-\begin{funcdesc}{ast2tuple}{ast\optional{\, line_info\code{ = 0}}}
+\begin{funcdesc}{ast2tuple}{ast\optional{, line_info\code{ = 0}}}
 This function accepts an AST object from the caller in
 \code{\var{ast}} and returns a Python tuple representing the
 equivelent parse tree.  Other than returning a tuple instead of a
@@ -184,7 +184,7 @@ representing the token.  This information is omitted if the flag is
 false or omitted.
 \end{funcdesc}
 
-\begin{funcdesc}{compileast}{ast\optional{\, filename\code{ = '<ast>'}}}
+\begin{funcdesc}{compileast}{ast\optional{, filename\code{ = '<ast>'}}}
 The Python byte compiler can be invoked on an AST object to produce
 code objects which can be used as part of an \code{exec} statement or
 a call to the built-in \function{eval()}\bifuncindex{eval} function.
diff --git a/Doc/libpdb.tex b/Doc/libpdb.tex
index 5cfada5..4fe8ad1 100644
--- a/Doc/libpdb.tex
+++ b/Doc/libpdb.tex
@@ -69,7 +69,7 @@ NameError: spam
 The module defines the following functions; each enters the debugger
 in a slightly different way:
 
-\begin{funcdesc}{run}{statement\optional{\, globals\optional{\, locals}}}
+\begin{funcdesc}{run}{statement\optional{, globals\optional{, locals}}}
 Execute the \var{statement} (given as a string) under debugger
 control.  The debugger prompt appears before any code is executed; you
 can set breakpoints and type \code{continue}, or you can step through
@@ -81,14 +81,14 @@ the explanation of the \code{exec} statement or the \code{eval()}
 built-in function.)
 \end{funcdesc}
 
-\begin{funcdesc}{runeval}{expression\optional{\, globals\optional{\, locals}}}
+\begin{funcdesc}{runeval}{expression\optional{, globals\optional{, locals}}}
 Evaluate the \var{expression} (given as a a string) under debugger
 control.  When \code{runeval()} returns, it returns the value of the
 expression.  Otherwise this function is similar to
 \code{run()}.
 \end{funcdesc}
 
-\begin{funcdesc}{runcall}{function\optional{\, argument\, ...}}
+\begin{funcdesc}{runcall}{function\optional{, argument, ...}}
 Call the \var{function} (a function or method object, not a string)
 with the given arguments.  When \code{runcall()} returns, it returns
 whatever the function call returned.  The debugger prompt appears as
diff --git a/Doc/libpickle.tex b/Doc/libpickle.tex
index e2dab0a..d508e5b 100644
--- a/Doc/libpickle.tex
+++ b/Doc/libpickle.tex
@@ -229,7 +229,7 @@ Collection may also become a problem here.)
 Apart from the \code{Pickler} and \code{Unpickler} classes, the
 module defines the following functions, and an exception:
 
-\begin{funcdesc}{dump}{object\, file\optional{, bin}}
+\begin{funcdesc}{dump}{object, file\optional{, bin}}
 Write a pickled representation of \var{obect} to the open file object
 \var{file}.  This is equivalent to
 \code{Pickler(\var{file}, \var{bin}).dump(\var{object})}.
diff --git a/Doc/libposix.tex b/Doc/libposix.tex
index 454c652..101938d 100644
--- a/Doc/libposix.tex
+++ b/Doc/libposix.tex
@@ -79,11 +79,11 @@ It defines the following functions and constants:
 Change the current working directory to \var{path}.
 \end{funcdesc}
 
-\begin{funcdesc}{chmod}{path\, mode}
+\begin{funcdesc}{chmod}{path, mode}
 Change the mode of \var{path} to the numeric \var{mode}.
 \end{funcdesc}
 
-\begin{funcdesc}{chown}{path\, uid, gid}
+\begin{funcdesc}{chown}{path, uid, gid}
 Change the owner and group id of \var{path} to the numeric \var{uid}
 and \var{gid}.
 (Not on MS-DOS.)
@@ -103,19 +103,19 @@ built-in function \function{open()} or by \function{popen()} or
 Return a duplicate of file descriptor \var{fd}.
 \end{funcdesc}
 
-\begin{funcdesc}{dup2}{fd\, fd2}
+\begin{funcdesc}{dup2}{fd, fd2}
 Duplicate file descriptor \var{fd} to \var{fd2}, closing the latter
 first if necessary.
 \end{funcdesc}
 
-\begin{funcdesc}{execv}{path\, args}
+\begin{funcdesc}{execv}{path, args}
 Execute the executable \var{path} with argument list \var{args},
 replacing the current process (i.e., the Python interpreter).
 The argument list may be a tuple or list of strings.
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{execve}{path\, args\, env}
+\begin{funcdesc}{execve}{path, args, env}
 Execute the executable \var{path} with argument list \var{args},
 and environment \var{env},
 replacing the current process (i.e., the Python interpreter).
@@ -134,7 +134,7 @@ Note: the standard way to exit is \code{sys.exit(\var{n})}.
 after a \function{fork()}.
 \end{funcdesc}
 
-\begin{funcdesc}{fdopen}{fd\optional{\, mode\optional{\, bufsize}}}
+\begin{funcdesc}{fdopen}{fd\optional{, mode\optional{, bufsize}}}
 Return an open file object connected to the file descriptor \var{fd}.
 The \var{mode} and \var{bufsize} arguments have the same meaning as
 the corresponding arguments to the built-in \function{open()} function.
@@ -150,7 +150,7 @@ process id in the parent.
 Return status for file descriptor \var{fd}, like \function{stat()}.
 \end{funcdesc}
 
-\begin{funcdesc}{ftruncate}{fd\, length}
+\begin{funcdesc}{ftruncate}{fd, length}
 Truncate the file corresponding to file descriptor \var{fd}, 
 so that it is at most \var{length} bytes in size.
 \end{funcdesc}
@@ -194,12 +194,12 @@ Return the current process' user id.
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{kill}{pid\, sig}
+\begin{funcdesc}{kill}{pid, sig}
 Kill the process \var{pid} with signal \var{sig}.
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{link}{src\, dst}
+\begin{funcdesc}{link}{src, dst}
 Create a hard link pointing to \var{src} named \var{dst}.
 (Not on MS-DOS.)
 \end{funcdesc}
@@ -211,7 +211,7 @@ entries \code{'.'} and \code{'..'} even if they are present in the
 directory.
 \end{funcdesc}
 
-\begin{funcdesc}{lseek}{fd\, pos\, how}
+\begin{funcdesc}{lseek}{fd, pos, how}
 Set the current position of file descriptor \var{fd} to position
 \var{pos}, modified by \var{how}: \code{0} to set the position
 relative to the beginning of the file; \code{1} to set it relative to
@@ -224,7 +224,7 @@ Like \function{stat()}, but do not follow symbolic links.  (On systems
 without symbolic links, this is identical to \function{stat()}.)
 \end{funcdesc}
 
-\begin{funcdesc}{mkfifo}{path\optional{\, mode}}
+\begin{funcdesc}{mkfifo}{path\optional{, mode}}
 Create a FIFO (a \POSIX{} named pipe) named \var{path} with numeric mode
 \var{mode}.  The default \var{mode} is \code{0666} (octal).  The current
 umask value is first masked out from the mode.
@@ -238,7 +238,7 @@ the client opens it for writing.  Note that \function{mkfifo()}
 doesn't open the FIFO --- it just creates the rendezvous point.
 \end{funcdesc}
 
-\begin{funcdesc}{mkdir}{path\optional{\, mode}}
+\begin{funcdesc}{mkdir}{path\optional{, mode}}
 Create a directory named \var{path} with numeric mode \var{mode}.
 The default \var{mode} is \code{0777} (octal).  On some systems,
 \var{mode} is ignored.  Where it is used, the current umask value is
@@ -250,7 +250,7 @@ Add \var{increment} to the process' ``niceness''.  Return the new
 niceness.  (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{open}{file\, flags\optional{\, mode}}
+\begin{funcdesc}{open}{file, flags\optional{, mode}}
 Open the file \var{file} and set various flags according to
 \var{flags} and possibly its mode according to \var{mode}.
 The default \var{mode} is \code{0777} (octal), and the current umask
@@ -279,7 +279,7 @@ Lock program segments into memory.  The value of \var{op}
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{popen}{command\optional{\, mode\optional{\, bufsize}}}
+\begin{funcdesc}{popen}{command\optional{, mode\optional{, bufsize}}}
 Open a pipe to or from \var{command}.  The return value is an open
 file object connected to the pipe, which can be read or written
 depending on whether \var{mode} is \code{'r'} (default) or \code{'w'}.
@@ -291,7 +291,7 @@ object.
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{putenv}{varname\, value}
+\begin{funcdesc}{putenv}{varname, value}
 \index{environment variables!setting}
 Set the environment variable named \var{varname} to the string
 \var{value}.  Such changes to the environment affect subprocesses
@@ -309,7 +309,7 @@ actually preferable to assign to items of \code{os.environ}.
 Return the error message corresponding to the error code in \var{code}.
 \end{funcdesc}
 
-\begin{funcdesc}{read}{fd\, n}
+\begin{funcdesc}{read}{fd, n}
 Read at most \var{n} bytes from file descriptor \var{fd}.
 Return a string containing the bytes read.
 
@@ -333,7 +333,7 @@ directory.  This is identical to the \function{unlink()} function
 documented below.
 \end{funcdesc}
 
-\begin{funcdesc}{rename}{src\, dst}
+\begin{funcdesc}{rename}{src, dst}
 Rename the file or directory \var{src} to \var{dst}.
 \end{funcdesc}
 
@@ -353,7 +353,7 @@ Calls the system call \cfunction{setpgrp()} or \cfunction{setpgrp(0,
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{setpgid}{pid\, pgrp}
+\begin{funcdesc}{setpgid}{pid, pgrp}
 Calls the system call \cfunction{setpgid()}.  See the \UNIX{} manual
 for the semantics.
 (Not on MS-DOS.)
@@ -393,7 +393,7 @@ functions and constants that are useful for extracting information
 from a stat structure.
 \end{funcdesc}
 
-\begin{funcdesc}{symlink}{src\, dst}
+\begin{funcdesc}{symlink}{src, dst}
 Create a symbolic link pointing to \var{src} named \var{dst}.  (On
 systems without symbolic links, this always raises \exception{error}.)
 \end{funcdesc}
@@ -413,7 +413,7 @@ Return the process group associated with the terminal given by
 (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{tcsetpgrp}{fd\, pg}
+\begin{funcdesc}{tcsetpgrp}{fd, pg}
 Set the process group associated with the terminal given by
 \var{fd} (an open file descriptor as returned by \function{open()})
 to \var{pg}.
@@ -453,7 +453,7 @@ Remove the file \var{path}.  This is the same function as \code{remove};
 the \code{unlink} name is its traditional \UNIX{} name.
 \end{funcdesc}
 
-\begin{funcdesc}{utime}{path\, {\rm (}atime, mtime{\rm )}}
+\begin{funcdesc}{utime}{path, {\rm (}atime, mtime{\rm )}}
 Set the access and modified time of the file to the given values.
 (The second argument is a tuple of two items.)
 \end{funcdesc}
@@ -466,7 +466,7 @@ exit status (if the signal number is zero); the high bit of the low
 byte is set if a core file was produced.  (Not on MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{waitpid}{pid\, options}
+\begin{funcdesc}{waitpid}{pid, options}
 Wait for completion of a child process given by proces id, and return
 a tuple containing its pid and exit status indication (encoded as for
 \function{wait()}).  The semantics of the call are affected by the
@@ -476,7 +476,7 @@ normal operation.  (If the system does not support
 MS-DOS.)
 \end{funcdesc}
 
-\begin{funcdesc}{write}{fd\, str}
+\begin{funcdesc}{write}{fd, str}
 Write the string \var{str} to file descriptor \var{fd}.
 Return the number of bytes actually written.
 
diff --git a/Doc/libppath.tex b/Doc/libppath.tex
index f1d17d6..6639c7c 100644
--- a/Doc/libppath.tex
+++ b/Doc/libppath.tex
@@ -80,7 +80,7 @@ different device than \var{p}, or whether \file{\var{p}/..} and
 detect mount points for all \UNIX{} and \POSIX{} variants.
 \end{funcdesc}
 
-\begin{funcdesc}{join}{p\optional{\, q\optional{\, ...}}}
+\begin{funcdesc}{join}{p\optional{, q\optional{, ...}}}
 Joins one or more path components intelligently.  If any component is
 an absolute path, all previous components are thrown away, and joining
 continues.  The return value is the concatenation of \var{p}, and
@@ -103,7 +103,7 @@ case (use \function{normcase()} for that).  On Windows, it does
 converts forward slashes to backward slashes.
 \end{funcdesc}
 
-\begin{funcdesc}{samefile}{p\, q}
+\begin{funcdesc}{samefile}{p, q}
 Return true if both pathname arguments refer to the same file or
 directory (as indicated by device number and i-node number).
 Raise an exception if a \function{os.stat()} call on either pathname
@@ -130,7 +130,7 @@ and \var{ext} is empty or begins with a period and contains
 at most one period.
 \end{funcdesc}
 
-\begin{funcdesc}{walk}{p\, visit\, arg}
+\begin{funcdesc}{walk}{p, visit, arg}
 Calls the function \var{visit} with arguments
 \code{(\var{arg}, \var{dirname}, \var{names})} for each directory in the
 directory tree rooted at \var{p} (including \var{p} itself, if it is a
diff --git a/Doc/libprofile.tex b/Doc/libprofile.tex
index a8b2099..3fa79df 100644
--- a/Doc/libprofile.tex
+++ b/Doc/libprofile.tex
@@ -269,7 +269,7 @@ Profiler Extensions, which includes discussion of how to derive
 ``better'' profilers from the classes presented, or reading the source
 code for these modules.
 
-\begin{funcdesc}{profile.run}{string\optional{\, filename\optional{\, ...}}}
+\begin{funcdesc}{profile.run}{string\optional{, filename\optional{, ...}}}
 
 This function takes a single argument that has can be passed to the
 \keyword{exec} statement, and an optional file name.  In all cases this
@@ -338,7 +338,7 @@ Analysis of the profiler data is done using this class from the
 
 \setindexsubitem{(in module pstats)}
 
-\begin{classdesc}{Stats}{filename\optional{\, ...}}
+\begin{classdesc}{Stats}{filename\optional{, ...}}
 This class constructor creates an instance of a ``statistics object''
 from a \var{filename} (or set of filenames).  \class{Stats} objects are
 manipulated by methods, in order to print useful reports.
@@ -375,7 +375,7 @@ statistics for these two entries are accumulated into a single entry.
 \end{funcdesc}
 
 
-\begin{funcdesc}{add}{filename\optional{\, ...}}
+\begin{funcdesc}{add}{filename\optional{, ...}}
 This method of the \class{Stats} class accumulates additional
 profiling information into the current profiling object.  Its
 arguments should refer to filenames created by the corresponding
@@ -384,7 +384,7 @@ version of \function{profile.run()}.  Statistics for identically named
 single function statistics.
 \end{funcdesc}
 
-\begin{funcdesc}{sort_stats}{key\optional{\, ...}}
+\begin{funcdesc}{sort_stats}{key\optional{, ...}}
 This method modifies the \class{Stats} object by sorting it according
 to the supplied criteria.  The argument is typically a string
 identifying the basis of a sort (example: \code{"time"} or
@@ -441,7 +441,7 @@ now that ascending vs descending order is properly selected based on
 the sort key of choice.
 \end{funcdesc}
 
-\begin{funcdesc}{print_stats}{restriction\optional{\, ...}}
+\begin{funcdesc}{print_stats}{restriction\optional{, ...}}
 This method for the \class{Stats} class prints out a report as described
 in the \function{profile.run()} definition.
 
@@ -476,7 +476,7 @@ and then proceed to only print the first 10\% of them.
 \end{funcdesc}
 
 
-\begin{funcdesc}{print_callers}{restrictions\optional{\, ...}}
+\begin{funcdesc}{print_callers}{restrictions\optional{, ...}}
 This method for the \class{Stats} class prints a list of all functions
 that called each function in the profiled database.  The ordering is
 identical to that provided by \method{print_stats()}, and the definition
@@ -486,7 +486,7 @@ times this specific call was made.  A second non-parenthesized number
 is the cumulative time spent in the function at the right.
 \end{funcdesc}
 
-\begin{funcdesc}{print_callees}{restrictions\optional{\, ...}}
+\begin{funcdesc}{print_callees}{restrictions\optional{, ...}}
 This method for the \class{Stats} class prints a list of all function
 that were called by the indicated function.  Aside from this reversal
 of direction of calls (re: called vs was called by), the arguments and
diff --git a/Doc/libquopri.tex b/Doc/libquopri.tex
index 4ad0c0f..e379e4a 100644
--- a/Doc/libquopri.tex
+++ b/Doc/libquopri.tex
@@ -13,7 +13,7 @@ are many such characters, as when sending a graphics file.
 
 \setindexsubitem{(in module quopri)}
 
-\begin{funcdesc}{decode}{input\, output}
+\begin{funcdesc}{decode}{input, output}
 Decode the contents of the \var{input} file and write the resulting
 decoded binary data to the \var{output} file.
 \var{input} and \var{output} must either be file objects or objects that
@@ -21,7 +21,7 @@ mimic the file object interface. \var{input} will be read until
 \code{\var{input}.read()} returns an empty string.
 \end{funcdesc}
 
-\begin{funcdesc}{encode}{input\, output\, quotetabs}
+\begin{funcdesc}{encode}{input, output, quotetabs}
 Encode the contents of the \var{input} file and write the resulting
 quoted-printable data to the \var{output} file.
 \var{input} and \var{output} must either be file objects or objects that
diff --git a/Doc/libregex.tex b/Doc/libregex.tex
index f427a88..e3de911 100644
--- a/Doc/libregex.tex
+++ b/Doc/libregex.tex
@@ -192,21 +192,21 @@ The module defines these functions, and an exception:
 
 \setindexsubitem{(in module regex)}
 
-\begin{funcdesc}{match}{pattern\, string}
+\begin{funcdesc}{match}{pattern, string}
   Return how many characters at the beginning of \var{string} match
   the regular expression \var{pattern}.  Return \code{-1} if the
   string does not match the pattern (this is different from a
   zero-length match!).
 \end{funcdesc}
 
-\begin{funcdesc}{search}{pattern\, string}
+\begin{funcdesc}{search}{pattern, string}
   Return the first position in \var{string} that matches the regular
   expression \var{pattern}.  Return \code{-1} if no position in the string
   matches the pattern (this is different from a zero-length match
   anywhere!).
 \end{funcdesc}
 
-\begin{funcdesc}{compile}{pattern\optional{\, translate}}
+\begin{funcdesc}{compile}{pattern\optional{, translate}}
   Compile a regular expression pattern into a regular expression
   object, which can be used for matching using its \code{match()} and
   \code{search()} methods, described below.  The optional argument
@@ -252,7 +252,7 @@ expressions.)
   Returns the current value of the syntax flags as an integer.
 \end{funcdesc}
 
-\begin{funcdesc}{symcomp}{pattern\optional{\, translate}}
+\begin{funcdesc}{symcomp}{pattern\optional{, translate}}
 This is like \code{compile()}, but supports symbolic group names: if a
 parenthesis-enclosed group begins with a group name in angular
 brackets, e.g. \code{'\e(<id>[a-z][a-z0-9]*\e)'}, the group can
@@ -279,7 +279,7 @@ equivalents.
 Compiled regular expression objects support these methods:
 
 \setindexsubitem{(regex method)}
-\begin{funcdesc}{match}{string\optional{\, pos}}
+\begin{funcdesc}{match}{string\optional{, pos}}
   Return how many characters at the beginning of \var{string} match
   the compiled regular expression.  Return \code{-1} if the string
   does not match the pattern (this is different from a zero-length
@@ -293,7 +293,7 @@ Compiled regular expression objects support these methods:
   is to start.
 \end{funcdesc}
 
-\begin{funcdesc}{search}{string\optional{\, pos}}
+\begin{funcdesc}{search}{string\optional{, pos}}
   Return the first position in \var{string} that matches the regular
   expression \code{pattern}.  Return \code{-1} if no position in the
   string matches the pattern (this is different from a zero-length
@@ -303,7 +303,7 @@ Compiled regular expression objects support these methods:
   \code{match()} method.
 \end{funcdesc}
 
-\begin{funcdesc}{group}{index\, index\, ...}
+\begin{funcdesc}{group}{index, index, ...}
 This method is only valid when the last call to the \code{match()}
 or \code{search()} method found a match.  It returns one or more
 groups of the match.  If there is a single \var{index} argument,
diff --git a/Doc/libregsub.tex b/Doc/libregsub.tex
index 08b990e..b4d3862 100644
--- a/Doc/libregsub.tex
+++ b/Doc/libregsub.tex
@@ -20,7 +20,7 @@ conversion help, see the URL
 
 \setindexsubitem{(in module regsub)}
 
-\begin{funcdesc}{sub}{pat\, repl\, str}
+\begin{funcdesc}{sub}{pat, repl, str}
 Replace the first occurrence of pattern \var{pat} in string
 \var{str} by replacement \var{repl}.  If the pattern isn't found,
 the string is returned unchanged.  The pattern may be a string or an
@@ -28,7 +28,7 @@ already compiled pattern.  The replacement may contain references
 \samp{\e \var{digit}} to subpatterns and escaped backslashes.
 \end{funcdesc}
 
-\begin{funcdesc}{gsub}{pat\, repl\, str}
+\begin{funcdesc}{gsub}{pat, repl, str}
 Replace all (non-overlapping) occurrences of pattern \var{pat} in
 string \var{str} by replacement \var{repl}.  The same rules as for
 \code{sub()} apply.  Empty matches for the pattern are replaced only
@@ -36,7 +36,7 @@ when not adjacent to a previous match, so e.g.
 \code{gsub('', '-', 'abc')} returns \code{'-a-b-c-'}.
 \end{funcdesc}
 
-\begin{funcdesc}{split}{str\, pat\optional{\, maxsplit}}
+\begin{funcdesc}{split}{str, pat\optional{, maxsplit}}
 Split the string \var{str} in fields separated by delimiters matching
 the pattern \var{pat}, and return a list containing the fields.  Only
 non-empty matches for the pattern are considered, so e.g.
@@ -47,7 +47,7 @@ occur, and the remainder of the string is returned as the final
 element of the list.
 \end{funcdesc}
 
-\begin{funcdesc}{splitx}{str\, pat\optional{\, maxsplit}}
+\begin{funcdesc}{splitx}{str, pat\optional{, maxsplit}}
 Split the string \var{str} in fields separated by delimiters matching
 the pattern \var{pat}, and return a list containing the fields as well
 as the separators.  For example, \code{splitx('a:::b', ':*')} returns
@@ -55,7 +55,7 @@ as the separators.  For example, \code{splitx('a:::b', ':*')} returns
 as \code{split}.
 \end{funcdesc}
 
-\begin{funcdesc}{capwords}{s\optional{\, pat}}
+\begin{funcdesc}{capwords}{s\optional{, pat}}
 Capitalize words separated by optional pattern \var{pat}.  The default
 pattern uses any characters except letters, digits and underscores as
 word delimiters.  Capitalization is done by changing the first
diff --git a/Doc/librexec.tex b/Doc/librexec.tex
index 626edd3..e301f81 100644
--- a/Doc/librexec.tex
+++ b/Doc/librexec.tex
@@ -151,7 +151,7 @@ Import the module \var{modulename}, raising an \exception{ImportError}
 exception if the module is considered unsafe.
 \end{funcdesc}
 
-\begin{funcdesc}{r_open}{filename\optional{\, mode\optional{\, bufsize}}}
+\begin{funcdesc}{r_open}{filename\optional{, mode\optional{, bufsize}}}
 Method called when \function{open()} is called in the restricted
 environment.  The arguments are identical to those of \function{open()},
 and a file object (or a class instance compatible with file objects)
@@ -172,7 +172,7 @@ restricted environment's \code{sys.modules} dictionary).
 
 And their equivalents with access to restricted standard I/O streams:
 
-\begin{funcdesc}{s_import}{modulename\optional{\, globals, locals, fromlist}}
+\begin{funcdesc}{s_import}{modulename\optional{, globals, locals, fromlist}}
 Import the module \var{modulename}, raising an \exception{ImportError}
 exception if the module is considered unsafe.
 \end{funcdesc}
diff --git a/Doc/librgbimg.tex b/Doc/librgbimg.tex
index 9432d2e..cb11554 100644
--- a/Doc/librgbimg.tex
+++ b/Doc/librgbimg.tex
@@ -29,7 +29,7 @@ the string. This format is suitable to pass to \code{gl.lrectwrite},
 for instance.
 \end{funcdesc}
 
-\begin{funcdesc}{longstoimage}{data\, x\, y\, z\, file}
+\begin{funcdesc}{longstoimage}{data, x, y, z, file}
 This function writes the RGBA data in \var{data} to image
 file \var{file}. \var{x} and \var{y} give the size of the image.
 \var{z} is 1 if the saved image should be 1 byte greyscale, 3 if the
diff --git a/Doc/librotor.tex b/Doc/librotor.tex
index 488a49f..e467d4e 100644
--- a/Doc/librotor.tex
+++ b/Doc/librotor.tex
@@ -25,7 +25,7 @@ order.
 The available functions in this module are:
 
 \setindexsubitem{(in module rotor)}
-\begin{funcdesc}{newrotor}{key\optional{\, numrotors}}
+\begin{funcdesc}{newrotor}{key\optional{, numrotors}}
 Return a rotor object. \var{key} is a string containing the encryption key
 for the object; it can contain arbitrary binary data. The key will be used
 to randomly generate the rotor permutations and their initial positions.
diff --git a/Doc/libselect.tex b/Doc/libselect.tex
index 956bf7f..5a800f5 100644
--- a/Doc/libselect.tex
+++ b/Doc/libselect.tex
@@ -13,7 +13,7 @@ corresponding string, as would be printed by the C function
 \code{perror()}.
 \end{excdesc}
 
-\begin{funcdesc}{select}{iwtd\, owtd\, ewtd\optional{\, timeout}}
+\begin{funcdesc}{select}{iwtd, owtd, ewtd\optional{, timeout}}
 This is a straightforward interface to the \UNIX{} \code{select()}
 system call.  The first three arguments are lists of `waitable
 objects': either integers representing \UNIX{} file descriptors or
diff --git a/Doc/libsgmllib.tex b/Doc/libsgmllib.tex
index 78060ec..f93095b 100644
--- a/Doc/libsgmllib.tex
+++ b/Doc/libsgmllib.tex
@@ -140,7 +140,7 @@ This method is called when an end tag is found which does not
 correspond to any open element.
 \end{funcdesc}
 
-\begin{funcdesc}{unknown_starttag}{tag\, attributes}
+\begin{funcdesc}{unknown_starttag}{tag, attributes}
 This method is called to process an unknown start tag.  It is intended
 to be overridden by a derived class; the base class implementation
 does nothing.
diff --git a/Doc/libsignal.tex b/Doc/libsignal.tex
index 39286a7..fd74cf8 100644
--- a/Doc/libsignal.tex
+++ b/Doc/libsignal.tex
@@ -124,7 +124,7 @@ The \module{signal} module defines the following functions:
   \UNIX{} man page \manpage{signal}{2}.)
 \end{funcdesc}
 
-\begin{funcdesc}{signal}{signalnum\, handler}
+\begin{funcdesc}{signal}{signalnum, handler}
   Set the handler for signal \var{signalnum} to the function
   \var{handler}.  \var{handler} can be any callable Python object, or
   one of the special values \constant{signal.SIG_IGN} or
diff --git a/Doc/libsocket.tex b/Doc/libsocket.tex
index 913bb8f..aff99d4 100644
--- a/Doc/libsocket.tex
+++ b/Doc/libsocket.tex
@@ -260,7 +260,7 @@ specifies the maximum number of queued connections and should be at
 least 1; the maximum value is system-dependent (usually 5).
 \end{funcdesc}
 
-\begin{funcdesc}{makefile}{\optional{mode\optional{\, bufsize}}}
+\begin{funcdesc}{makefile}{\optional{mode\optional{, bufsize}}}
 Return a \dfn{file object} associated with the socket.  (File objects
 were described earlier in \ref{bltin-file-objects}, ``File Objects.'')
 The file object references a \cfunction{dup()}ped version of the
@@ -293,7 +293,7 @@ socket.  The optional \var{flags} argument has the same meaning as for
 \method{recv()} above.  Returns the number of bytes sent.
 \end{funcdesc}
 
-\begin{funcdesc}{sendto}{string\optional{\, flags}\, address}
+\begin{funcdesc}{sendto}{string\optional{, flags}, address}
 Send data to the socket.  The socket should not be connected to a
 remote socket, since the destination socket is specified by
 \var{address}.  The optional \var{flags} argument has the same
@@ -310,7 +310,7 @@ immediately dispose of the data, a \exception{error} exception is
 raised; in blocking mode, the calls block until they can proceed.
 \end{funcdesc}
 
-\begin{funcdesc}{setsockopt}{level\, optname\, value}
+\begin{funcdesc}{setsockopt}{level, optname, value}
 Set the value of the given socket option (see the \UNIX{} man page
 \manpage{setsockopt}{2}).  The needed symbolic constants are defined in
 the \module{socket} module (\code{SO_*} etc.).  The value can be an
diff --git a/Doc/libsocksvr.tex b/Doc/libsocksvr.tex
index ea1b703..2ee36a4 100644
--- a/Doc/libsocksvr.tex
+++ b/Doc/libsocksvr.tex
@@ -123,14 +123,14 @@ the \emph{new} socket object to be used to communicate with the
 client, and the client's address.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_error}{request\, client_address}
+\begin{funcdesc}{handle_error}{request, client_address}
 This function is called if the \member{RequestHandlerClass}'s
 \method{handle()} method raises an exception.  The default action is
 to print the traceback to standard output and continue handling
 further requests.
 \end{funcdesc}
 
-\begin{funcdesc}{process_request}{request\, client_address}
+\begin{funcdesc}{process_request}{request, client_address}
 Calls \method{finish_request()} to create an instance of the
 \member{RequestHandlerClass}.  If desired, this function can create a
 new process or thread to handle the request; the \class{ForkingMixIn}
@@ -151,7 +151,7 @@ Called by the server's constructor to bind the socket to the desired
 address.  May be overridden.
 \end{funcdesc}
 
-\begin{funcdesc}{verify_request}{request\, client_address}
+\begin{funcdesc}{verify_request}{request, client_address}
 Must return a Boolean value; if the value is true, the request will be
 processed, and if it's false, the request will be denied.
 This function can be overridden to implement access controls for a server.
diff --git a/Doc/libstdwin.tex b/Doc/libstdwin.tex
index b16fde6..35ff6a7 100644
--- a/Doc/libstdwin.tex
+++ b/Doc/libstdwin.tex
@@ -80,16 +80,16 @@ matches any single character.
 On the Macintosh this function currently returns an empty list.
 \end{funcdesc}
 
-\begin{funcdesc}{setdefscrollbars}{hflag\, vflag}
+\begin{funcdesc}{setdefscrollbars}{hflag, vflag}
 Set the flags controlling whether subsequently opened windows will
 have horizontal and/or vertical scroll bars.
 \end{funcdesc}
 
-\begin{funcdesc}{setdefwinpos}{h\, v}
+\begin{funcdesc}{setdefwinpos}{h, v}
 Set the default window position for windows opened subsequently.
 \end{funcdesc}
 
-\begin{funcdesc}{setdefwinsize}{width\, height}
+\begin{funcdesc}{setdefwinsize}{width, height}
 Set the default window size for windows opened subsequently.
 \end{funcdesc}
 
@@ -176,7 +176,7 @@ Note: normally, menus are created locally; see the window method
 returned by this call exists.
 \end{funcdesc}
 
-\begin{funcdesc}{newbitmap}{width\, height}
+\begin{funcdesc}{newbitmap}{width, height}
 Create a new bitmap object of the given dimensions.
 Methods of bitmap objects are described below.
 Not available on the Macintosh.
@@ -192,7 +192,7 @@ Display a dialog box containing the string.
 The user must click OK before the function returns.
 \end{funcdesc}
 
-\begin{funcdesc}{askync}{prompt\, default}
+\begin{funcdesc}{askync}{prompt, default}
 Display a dialog that prompts the user to answer a question with yes or
 no.
 Return 0 for no, 1 for yes.
@@ -203,7 +203,7 @@ If the user cancels the dialog, the
 exception is raised.
 \end{funcdesc}
 
-\begin{funcdesc}{askstr}{prompt\, default}
+\begin{funcdesc}{askstr}{prompt, default}
 Display a dialog that prompts the user for a string.
 If the user hits the Return key, the default string is returned.
 If the user cancels the dialog, the
@@ -211,7 +211,7 @@ If the user cancels the dialog, the
 exception is raised.
 \end{funcdesc}
 
-\begin{funcdesc}{askfile}{prompt\, default\, new}
+\begin{funcdesc}{askfile}{prompt, default, new}
 Ask the user to specify a filename.
 If
 \var{new}
@@ -221,7 +221,7 @@ If the user cancels the dialog, the
 exception is raised.
 \end{funcdesc}
 
-\begin{funcdesc}{setcutbuffer}{i\, string}
+\begin{funcdesc}{setcutbuffer}{i, string}
 Store the string in the system's cut buffer number
 \var{i},
 where it can be found (for pasting) by other applications.
@@ -278,7 +278,7 @@ characters).
 Return the total line height of the current font.
 \end{funcdesc}
 
-\begin{funcdesc}{textbreak}{str\, width}
+\begin{funcdesc}{textbreak}{str, width}
 Return the number of characters of the string that fit into a space of
 \var{width}
 bits wide when drawn in the curent font.
@@ -365,7 +365,7 @@ Methods of menu objects are described below.
 returned by this call exists.
 \end{funcdesc}
 
-\begin{funcdesc}{scroll}{rect\, point}
+\begin{funcdesc}{scroll}{rect, point}
 Scroll the given rectangle by the vector given by the point.
 \end{funcdesc}
 
@@ -378,7 +378,7 @@ Move the origin of the window (its upper left corner)
 to the given point in the document.
 \end{funcdesc}
 
-\begin{funcdesc}{setselection}{i\, str}
+\begin{funcdesc}{setselection}{i, str}
 Attempt to set X11 selection number
 \var{i}
 to the string
@@ -428,12 +428,12 @@ On X11, there are many more (see
 \end{sloppypar}
 \end{funcdesc}
 
-\begin{funcdesc}{setwinpos}{h\, v}
+\begin{funcdesc}{setwinpos}{h, v}
 Set the the position of the window's upper left corner (relative to
 the upper left corner of the screen).
 \end{funcdesc}
 
-\begin{funcdesc}{setwinsize}{width\, height}
+\begin{funcdesc}{setwinsize}{width, height}
 Set the window's size.
 \end{funcdesc}
 
@@ -474,11 +474,11 @@ Drawing objects have the following methods:
 Draw a box just inside a rectangle.
 \end{funcdesc}
 
-\begin{funcdesc}{circle}{center\, radius}
+\begin{funcdesc}{circle}{center, radius}
 Draw a circle with given center point and radius.
 \end{funcdesc}
 
-\begin{funcdesc}{elarc}{center\, \(rh\, rv\)\, \(a1\, a2\)}
+\begin{funcdesc}{elarc}{center, \(rh, rv\), \(a1, a2\)}
 Draw an elliptical arc with given center point.
 \code{(\var{rh}, \var{rv})}
 gives the half sizes of the horizontal and vertical radii.
@@ -491,11 +491,11 @@ gives the angles (in degrees) of the begin and end points.
 Erase a rectangle.
 \end{funcdesc}
 
-\begin{funcdesc}{fillcircle}{center\, radius}
+\begin{funcdesc}{fillcircle}{center, radius}
 Draw a filled circle with given center point and radius.
 \end{funcdesc}
 
-\begin{funcdesc}{fillelarc}{center\, \(rh\, rv\)\, \(a1\, a2\)}
+\begin{funcdesc}{fillelarc}{center, \(rh, rv\), \(a1, a2\)}
 Draw a filled elliptical arc; arguments as for \code{elarc}.
 \end{funcdesc}
 
@@ -507,7 +507,7 @@ Draw a filled polygon given by a list (or tuple) of points.
 Invert a rectangle.
 \end{funcdesc}
 
-\begin{funcdesc}{line}{p1\, p2}
+\begin{funcdesc}{line}{p1, p2}
 Draw a line from point
 \var{p1}
 to
@@ -522,20 +522,20 @@ Fill a rectangle.
 Draw the lines connecting the given list (or tuple) of points.
 \end{funcdesc}
 
-\begin{funcdesc}{shade}{rect\, percent}
+\begin{funcdesc}{shade}{rect, percent}
 Fill a rectangle with a shading pattern that is about
 \var{percent}
 percent filled.
 \end{funcdesc}
 
-\begin{funcdesc}{text}{p\, str}
+\begin{funcdesc}{text}{p, str}
 Draw a string starting at point p (the point specifies the
 top left coordinate of the string).
 \end{funcdesc}
 
-\begin{funcdesc}{xorcircle}{center\, radius}
-\funcline{xorelarc}{center\, \(rh\, rv\)\, \(a1\, a2\)}
-\funcline{xorline}{p1\, p2}
+\begin{funcdesc}{xorcircle}{center, radius}
+\funcline{xorelarc}{center, \(rh, rv\), \(a1, a2\)}
+\funcline{xorline}{p1, p2}
 \funcline{xorpoly}{points}
 Draw a circle, an elliptical arc, a line or a polygon, respectively,
 in XOR mode.
@@ -570,7 +570,7 @@ default font, which is in turn initialized from the global default
 font when the window is created.
 \end{funcdesc}
 
-\begin{funcdesc}{bitmap}{point\, bitmap\, mask}
+\begin{funcdesc}{bitmap}{point, bitmap, mask}
 Draw the \var{bitmap} with its top left corner at \var{point}.
 If the optional \var{mask} argument is present, it should be either
 the same object as \var{bitmap}, to draw only those bits that are set
@@ -608,23 +608,23 @@ The following methods are defined:
 
 \setindexsubitem{(menu method)}
 
-\begin{funcdesc}{additem}{text\, shortcut}
+\begin{funcdesc}{additem}{text, shortcut}
 Add a menu item with given text.
 The shortcut must be a string of length 1, or omitted (to specify no
 shortcut).
 \end{funcdesc}
 
-\begin{funcdesc}{setitem}{i\, text}
+\begin{funcdesc}{setitem}{i, text}
 Set the text of item number
 \var{i}.
 \end{funcdesc}
 
-\begin{funcdesc}{enable}{i\, flag}
+\begin{funcdesc}{enable}{i, flag}
 Enable or disables item
 \var{i}.
 \end{funcdesc}
 
-\begin{funcdesc}{check}{i\, flag}
+\begin{funcdesc}{check}{i, flag}
 Set or clear the
 \dfn{check mark}
 for item
@@ -652,7 +652,7 @@ Return a tuple representing the width and height of the bitmap.
 function.)
 \end{funcdesc}
 
-\begin{funcdesc}{setbit}{point\, bit}
+\begin{funcdesc}{setbit}{point, bit}
 Set the value of the bit indicated by \var{point} to \var{bit}.
 \end{funcdesc}
 
@@ -691,7 +691,7 @@ Pass a draw event to the text-edit block.
 The rectangle specifies the redraw area.
 \end{funcdesc}
 
-\begin{funcdesc}{event}{type\, window\, detail}
+\begin{funcdesc}{event}{type, window, detail}
 Pass an event gotten from
 \code{stdwin.getevent()}
 to the text-edit block.
@@ -727,7 +727,7 @@ Replace the text in the focus by the given string.
 The new focus is an insert point at the end of the string.
 \end{funcdesc}
 
-\begin{funcdesc}{setfocus}{i\, j}
+\begin{funcdesc}{setfocus}{i, j}
 Specify the new focus.
 Out-of-bounds values are silently clipped.
 \end{funcdesc}
@@ -869,7 +869,7 @@ Returns
 if the list is empty or all its rectangles are empty.
 \end{funcdesc}
 
-\begin{funcdesc}{pointinrect}{point\, rect}
+\begin{funcdesc}{pointinrect}{point, rect}
 Returns true if the point is inside the rectangle.
 By definition, a point
 \code{(\var{h}, \var{v})}
@@ -884,7 +884,7 @@ $\var{top} \leq \var{v} < \var{bottom}$.
 \fi
 \end{funcdesc}
 
-\begin{funcdesc}{inset}{rect\, \(dh\, dv\)}
+\begin{funcdesc}{inset}{rect, \(dh, dv\)}
 Returns a rectangle that lies inside the
 \code{rect}
 argument by
diff --git a/Doc/libstring.tex b/Doc/libstring.tex
index 7242c53..98e5a80 100644
--- a/Doc/libstring.tex
+++ b/Doc/libstring.tex
@@ -1,12 +1,11 @@
 \section{Standard Module \sectcode{string}}
 \label{module-string}
-
 \stmodindex{string}
 
 This module defines some constants useful for checking character
 classes and some useful string functions.  See the module
-\code{re} for string functions based on regular expressions.
-\refstmodindex{re}
+\module{re}\refstmodindex{re} for string functions based on regular
+expressions.
 
 The constants defined in this module are are:
 
@@ -20,16 +19,16 @@ The constants defined in this module are are:
 \end{datadesc}
 
 \begin{datadesc}{letters}
-  The concatenation of the strings \code{lowercase} and
-  \code{uppercase} described below.
+  The concatenation of the strings \function{lowercase()} and
+  \function{uppercase()} described below.
 \end{datadesc}
 
 \begin{datadesc}{lowercase}
   A string containing all the characters that are considered lowercase
   letters.  On most systems this is the string
   \code{'abcdefghijklmnopqrstuvwxyz'}.  Do not change its definition ---
-  the effect on the routines \code{upper} and \code{swapcase} is
-  undefined.
+  the effect on the routines \function{upper()} and
+  \function{swapcase()} is undefined.
 \end{datadesc}
 
 \begin{datadesc}{octdigits}
@@ -40,16 +39,16 @@ The constants defined in this module are are:
   A string containing all the characters that are considered uppercase
   letters.  On most systems this is the string
   \code{'ABCDEFGHIJKLMNOPQRSTUVWXYZ'}.  Do not change its definition ---
-  the effect on the routines \code{lower} and \code{swapcase} is
-  undefined.
+  the effect on the routines \function{lower()} and
+  \function{swapcase()} is undefined.
 \end{datadesc}
 
 \begin{datadesc}{whitespace}
   A string containing all characters that are considered whitespace.
   On most systems this includes the characters space, tab, linefeed,
   return, formfeed, and vertical tab.  Do not change its definition ---
-  the effect on the routines \code{strip} and \code{split} is
-  undefined.
+  the effect on the routines \function{strip()} and \function{split()}
+  is undefined.
 \end{datadesc}
 
 The functions defined in this module are:
@@ -60,10 +59,11 @@ The functions defined in this module are:
 Convert a string to a floating point number.  The string must have
 the standard syntax for a floating point literal in Python, optionally
 preceded by a sign (\samp{+} or \samp{-}).  Note that this behaves
-identical to the built-in function \code{float()} when passed a string.
+identical to the built-in function
+\function{float()}\bifuncindex{float} when passed a string.
 \end{funcdesc}
 
-\begin{funcdesc}{atoi}{s\optional{\, base}}
+\begin{funcdesc}{atoi}{s\optional{, base}}
 Convert string \var{s} to an integer in the given \var{base}.  The
 string must consist of one or more digits, optionally preceded by a
 sign (\samp{+} or \samp{-}).  The \var{base} defaults to 10.  If it is
@@ -72,20 +72,20 @@ string (after stripping the sign): \samp{0x} or \samp{0X} means 16,
 \samp{0} means 8, anything else means 10.  If \var{base} is 16, a
 leading \samp{0x} or \samp{0X} is always accepted.  Note that when
 invoked without \var{base} or with \var{base} set to 10, this behaves
-identical to the built-in function \code{int()} when passed a string.
+identical to the built-in function \function{int()} when passed a string.
 (Also note: for a more flexible interpretation of numeric literals,
-use the built-in function \code{eval()}.)
-\bifuncindex{eval}
+use the built-in function \function{eval()}\bifuncindex{eval}.)
 \end{funcdesc}
 
-\begin{funcdesc}{atol}{s\optional{\, base}}
-Convert string \var{s} to a long integer in the given \var{base}.  The
+\begin{funcdesc}{atol}{s\optional{, base}}
+Convert string \var{s} to a long integer in the given \var{base}.  The 
 string must consist of one or more digits, optionally preceded by a
 sign (\samp{+} or \samp{-}).  The \var{base} argument has the same
-meaning as for \code{atoi()}.  A trailing \samp{l} or \samp{L} is not
-allowed, except if the base is 0.  Note that when invoked without
+meaning as for \function{atoi()}.  A trailing \samp{l} or \samp{L} is
+not allowed, except if the base is 0.  Note that when invoked without
 \var{base} or with \var{base} set to 10, this behaves identical to the
-built-in function \code{long()} when passed a string.
+built-in function \function{long()}\bifuncindex{long} when passed a
+string.
 \end{funcdesc}
 
 \begin{funcdesc}{capitalize}{word}
@@ -93,13 +93,14 @@ Capitalize the first character of the argument.
 \end{funcdesc}
 
 \begin{funcdesc}{capwords}{s}
-Split the argument into words using \code{split}, capitalize each word
-using \code{capitalize}, and join the capitalized words using
-\code{join}.  Note that this replaces runs of whitespace characters by
-a single space, and removes leading and trailing whitespace.
+Split the argument into words using \function{split()}, capitalize
+each word using \function{capitalize()}, and join the capitalized
+words using \function{join()}.  Note that this replaces runs of
+whitespace characters by a single space, and removes leading and
+trailing whitespace.
 \end{funcdesc}
 
-\begin{funcdesc}{expandtabs}{s\, tabsize}
+\begin{funcdesc}{expandtabs}{s, tabsize}
 Expand tabs in a string, i.e.\ replace them by one or more spaces,
 depending on the current column and the given tab size.  The column
 number is reset to zero after each newline occurring in the string.
@@ -107,29 +108,29 @@ This doesn't understand other non-printing characters or escape
 sequences.
 \end{funcdesc}
 
-\begin{funcdesc}{find}{s\, sub\optional{\, start\optional{\,end}}}
+\begin{funcdesc}{find}{s, sub\optional{, start\optional{,end}}}
 Return the lowest index in \var{s} where the substring \var{sub} is
 found such that \var{sub} is wholly contained in
-\code{\var{s}[\var{start}:\var{end}]}.  Return -1 on failure.
+\code{\var{s}[\var{start}:\var{end}]}.  Return \code{-1} on failure.
 Defaults for \var{start} and \var{end} and interpretation of negative
 values is the same as for slices.
 \end{funcdesc}
 
-\begin{funcdesc}{rfind}{s\, sub\optional{\, start\optional{\,end}}}
-Like \code{find} but find the highest index.
+\begin{funcdesc}{rfind}{s, sub\optional{, start\optional{, end}}}
+Like \function{find()} but find the highest index.
 \end{funcdesc}
 
-\begin{funcdesc}{index}{s\, sub\optional{\, start\optional{\,end}}}
-Like \code{find} but raise \code{ValueError} when the substring is
-not found.
+\begin{funcdesc}{index}{s, sub\optional{, start\optional{, end}}}
+Like \function{find()} but raise \exception{ValueError} when the
+substring is not found.
 \end{funcdesc}
 
-\begin{funcdesc}{rindex}{s\, sub\optional{\, start\optional{\,end}}}
-Like \code{rfind} but raise \code{ValueError} when the substring is
-not found.
+\begin{funcdesc}{rindex}{s, sub\optional{, start\optional{, end}}}
+Like \function{rfind()} but raise \exception{ValueError} when the
+substring is not found.
 \end{funcdesc}
 
-\begin{funcdesc}{count}{s\, sub\optional{\, start\optional{\,end}}}
+\begin{funcdesc}{count}{s, sub\optional{, start\optional{, end}}}
 Return the number of (non-overlapping) occurrences of substring
 \var{sub} in string \code{\var{s}[\var{start}:\var{end}]}.
 Defaults for \var{start} and \var{end} and interpretation of negative
@@ -141,13 +142,13 @@ Convert letters to lower case.
 \end{funcdesc}
 
 \begin{funcdesc}{maketrans}{from, to}
-Return a translation table suitable for passing to \code{string.translate}
-or \code{regex.compile}, that will map each character in \var{from} 
-into the character at the same position in \var{to}; \var{from} and
-\var{to} must have the same length. 
+Return a translation table suitable for passing to
+\function{translate()} or \function{regex.compile()}, that will map
+each character in \var{from} into the character at the same position
+in \var{to}; \var{from} and \var{to} must have the same length. 
 \end{funcdesc}
 
-\begin{funcdesc}{split}{s\optional{\, sep\optional{\, maxsplit}}}
+\begin{funcdesc}{split}{s\optional{, sep\optional{, maxsplit}}}
 Return a list of the words of the string \var{s}.  If the optional
 second argument \var{sep} is absent or \code{None}, the words are
 separated by arbitrary strings of whitespace characters (space, tab,
@@ -161,24 +162,24 @@ remainder of the string is returned as the final element of the list
 (thus, the list will have at most \code{\var{maxsplit}+1} elements).
 \end{funcdesc}
 
-\begin{funcdesc}{splitfields}{s\optional{\, sep\optional{\, maxsplit}}}
-This function behaves identically to \code{split}.  (In the past,
-\code{split} was only used with one argument, while \code{splitfields}
-was only used with two arguments.)
+\begin{funcdesc}{splitfields}{s\optional{, sep\optional{, maxsplit}}}
+This function behaves identically to \function{split()}.  (In the
+past, \function{split()} was only used with one argument, while
+\function{splitfields()} was only used with two arguments.)
 \end{funcdesc}
 
-\begin{funcdesc}{join}{words\optional{\, sep}}
+\begin{funcdesc}{join}{words\optional{, sep}}
 Concatenate a list or tuple of words with intervening occurrences of
-\var{sep}.  The default value for \var{sep} is a single space character.
-It is always true that
-\code{string.join(string.split(\var{s}, \var{sep}), \var{sep})}
+\var{sep}.  The default value for \var{sep} is a single space
+character.  It is always true that
+\samp{string.join(string.split(\var{s}, \var{sep}), \var{sep})}
 equals \var{s}.
 \end{funcdesc}
 
-\begin{funcdesc}{joinfields}{words\optional{\, sep}}
-This function behaves identical to \code{join}.  (In the past,
-\code{join} was only used with one argument, while \code{joinfields}
-was only used with two arguments.)
+\begin{funcdesc}{joinfields}{words\optional{, sep}}
+This function behaves identical to \function{join()}.  (In the past,
+\function{join()} was only used with one argument, while
+\function{joinfields()} was only used with two arguments.)
 \end{funcdesc}
 
 \begin{funcdesc}{lstrip}{s}
@@ -198,19 +199,19 @@ Convert lower case letters to upper case and vice versa.
 \end{funcdesc}
 
 \begin{funcdesc}{translate}{s, table\optional{, deletechars}}
-Delete all characters from \var{s} that are in \var{deletechars} (if present), and 
-then translate the characters using \var{table}, which must be
-a 256-character string giving the translation for each character
-value, indexed by its ordinal.  
+Delete all characters from \var{s} that are in \var{deletechars} (if
+present), and then translate the characters using \var{table}, which
+must be a 256-character string giving the translation for each
+character value, indexed by its ordinal.  
 \end{funcdesc}
 
 \begin{funcdesc}{upper}{s}
 Convert letters to upper case.
 \end{funcdesc}
 
-\begin{funcdesc}{ljust}{s\, width}
-\funcline{rjust}{s\, width}
-\funcline{center}{s\, width}
+\begin{funcdesc}{ljust}{s, width}
+\funcline{rjust}{s, width}
+\funcline{center}{s, width}
 These functions respectively left-justify, right-justify and center a
 string in a field of given width.
 They return a string that is at least
@@ -221,7 +222,7 @@ with spaces until the given width on the right, left or both sides.
 The string is never truncated.
 \end{funcdesc}
 
-\begin{funcdesc}{zfill}{s\, width}
+\begin{funcdesc}{zfill}{s, width}
 Pad a numeric string on the left with zero digits until the given
 width is reached.  Strings starting with a sign are handled correctly.
 \end{funcdesc}
@@ -234,10 +235,10 @@ replaced.
 \end{funcdesc}
 
 This module is implemented in Python.  Much of its functionality has
-been reimplemented in the built-in module \code{strop}.  However, you
+been reimplemented in the built-in module
+\module{strop}\refbimodindex{strop}.  However, you
 should \emph{never} import the latter module directly.  When
-\code{string} discovers that \code{strop} exists, it transparently
-replaces parts of itself with the implementation from \code{strop}.
+\module{string} discovers that \module{strop} exists, it transparently
+replaces parts of itself with the implementation from \module{strop}.
 After initialization, there is \emph{no} overhead in using
-\code{string} instead of \code{strop}.
-\refbimodindex{strop}
+\module{string} instead of \module{strop}.
diff --git a/Doc/libstruct.tex b/Doc/libstruct.tex
index d0fde4f..b92076c 100644
--- a/Doc/libstruct.tex
+++ b/Doc/libstruct.tex
@@ -16,14 +16,14 @@ The module defines the following exception and functions:
   describing what is wrong.
 \end{excdesc}
 
-\begin{funcdesc}{pack}{fmt\, v1\, v2\, {\rm \ldots}}
+\begin{funcdesc}{pack}{fmt, v1, v2, {\rm \ldots}}
   Return a string containing the values
   \code{\var{v1}, \var{v2}, {\rm \ldots}} packed according to the given
   format.  The arguments must match the values required by the format
   exactly.
 \end{funcdesc}
 
-\begin{funcdesc}{unpack}{fmt\, string}
+\begin{funcdesc}{unpack}{fmt, string}
   Unpack the string (presumably packed by \code{pack(\var{fmt}, {\rm \ldots})})
   according to the given format.  The result is a tuple even if it
   contains exactly one item.  The string must contain exactly the
diff --git a/Doc/libsyslog.tex b/Doc/libsyslog.tex
index 8348e9c..5d2b6a9 100644
--- a/Doc/libsyslog.tex
+++ b/Doc/libsyslog.tex
@@ -10,7 +10,7 @@ The module defines the following functions:
 
 \setindexsubitem{(in module syslog)}
 
-\begin{funcdesc}{syslog}{\optional{priority\,} message}
+\begin{funcdesc}{syslog}{\optional{priority,} message}
 Send the string \var{message} to the system logger.
 A trailing newline is added if necessary.
 Each message is tagged with a priority composed of a \var{facility} and
diff --git a/Doc/libtemplate.tex b/Doc/libtemplate.tex
index db07934..3fb4f51 100644
--- a/Doc/libtemplate.tex
+++ b/Doc/libtemplate.tex
@@ -61,7 +61,7 @@ The \module{spam} module defines the following functions:
 % least once in the description; each usage (even inside \code{...})
 % should be enclosed in \var{...}.
 
-\begin{funcdesc}{open}{filename\optional{\, mode\, buffersize}}
+\begin{funcdesc}{open}{filename\optional{, mode, buffersize}}
 Open the file \var{filename} as a can of Spam.  The optional
 \var{mode} and \var{buffersize} arguments specify the read-write mode
 (\code{'r'} (default) or \code{'w'}) and the buffer size (default:
diff --git a/Doc/libthread.tex b/Doc/libthread.tex
index 24ebac5..dabfe70 100644
--- a/Doc/libthread.tex
+++ b/Doc/libthread.tex
@@ -25,7 +25,7 @@ It defines the following constant and functions:
 Raised on thread-specific errors.
 \end{excdesc}
 
-\begin{funcdesc}{start_new_thread}{func\, arg}
+\begin{funcdesc}{start_new_thread}{func, arg}
 Start a new thread.  The thread executes the function \var{func}
 with the argument list \var{arg} (which must be a tuple).  When the
 function returns, the thread silently exits.  When the function
diff --git a/Doc/libtypes.tex b/Doc/libtypes.tex
index 5c87653..70f970e 100644
--- a/Doc/libtypes.tex
+++ b/Doc/libtypes.tex
@@ -534,9 +534,9 @@ dictionary entry.
 \indexii{dictionary}{type}
 
 Dictionaries are created by placing a comma-separated list of
-\code{\var{key}:\,\var{value}} pairs within braces, for example:
-\code{\{'jack':\,4098, 'sjoerd':\,4127\}} or
-\code{\{4098:\,'jack', 4127:\,'sjoerd'\}}.
+\code{\var{key}: \var{value}} pairs within braces, for example:
+\code{\{'jack': 4098, 'sjoerd': 4127\}} or
+\code{\{4098: 'jack', 4127: 'sjoerd'\}}.
 
 The following operations are defined on mappings (where \var{a} is a
 mapping, \var{k} is a key and \var{x} is an arbitrary object):
@@ -767,7 +767,7 @@ descriptors, e.g. module \code{fcntl} or \code{os.read()} and friends.
   internal buffer size) are read.
 \end{funcdesc}
 
-\begin{funcdesc}{seek}{offset\, whence}
+\begin{funcdesc}{seek}{offset, whence}
   Set the file's current position, like \code{stdio}'s \code{fseek()}.
   The \var{whence} argument is optional and defaults to \code{0}
   (absolute file positioning); other values are \code{1} (seek
diff --git a/Doc/liburllib.tex b/Doc/liburllib.tex
index 01fc875..1732d85 100644
--- a/Doc/liburllib.tex
+++ b/Doc/liburllib.tex
@@ -55,7 +55,7 @@ Clear the cache that may have been built up by previous calls to
 \function{urlretrieve()}.
 \end{funcdesc}
 
-\begin{funcdesc}{quote}{string\optional{\, addsafe}}
+\begin{funcdesc}{quote}{string\optional{, addsafe}}
 Replace special characters in \var{string} using the \samp{\%xx} escape.
 Letters, digits, and the characters \character{_,.-} are never quoted.
 The optional \var{addsafe} parameter specifies additional characters
@@ -64,7 +64,7 @@ that should not be quoted --- its default value is \code{'/'}.
 Example: \code{quote('/\~connolly/')} yields \code{'/\%7econnolly/'}.
 \end{funcdesc}
 
-\begin{funcdesc}{quote_plus}{string\optional{\, addsafe}}
+\begin{funcdesc}{quote_plus}{string\optional{, addsafe}}
 Like \function{quote()}, but also replaces spaces by plus signs, as
 required for quoting HTML form values.
 \end{funcdesc}
diff --git a/Doc/liburlparse.tex b/Doc/liburlparse.tex
index 32d88ee..3017a16 100644
--- a/Doc/liburlparse.tex
+++ b/Doc/liburlparse.tex
@@ -61,7 +61,7 @@ URL that was parsed originally had redundant delimiters, e.g. a ? with
 an empty query (the draft states that these are equivalent).
 \end{funcdesc}
 
-\begin{funcdesc}{urljoin}{base\, url\optional{\, allow_fragments}}
+\begin{funcdesc}{urljoin}{base, url\optional{, allow_fragments}}
 Construct a full (``absolute'') URL by combining a ``base URL''
 (\var{base}) with a ``relative URL'' (\var{url}).  Informally, this
 uses components of the base URL, in particular the addressing scheme,
diff --git a/Doc/libuu.tex b/Doc/libuu.tex
index 87182dc..e953628 100644
--- a/Doc/libuu.tex
+++ b/Doc/libuu.tex
@@ -19,7 +19,7 @@ The \module{uu} module defines the following functions:
 
 \setindexsubitem{(in module uu)}
 
-\begin{funcdesc}{encode}{in_file\, out_file\optional{\, name\, mode}}
+\begin{funcdesc}{encode}{in_file, out_file\optional{, name, mode}}
 Uuencode file \var{in_file} into file \var{out_file}.  The uuencoded
 file will have the header specifying \var{name} and \var{mode} as the
 defaults for the results of decoding the file. The default defaults
@@ -27,7 +27,7 @@ are taken from \var{in_file}, or \code{'-'} and \code{0666}
 respectively. 
 \end{funcdesc}
 
-\begin{funcdesc}{decode}{in_file\optional{\, out_file\, mode}}
+\begin{funcdesc}{decode}{in_file\optional{, out_file, mode}}
 This call decodes uuencoded file \var{in_file} placing the result on
 file \var{out_file}. If \var{out_file} is a pathname the \var{mode} is
 also set. Defaults for \var{out_file} and \var{mode} are taken from
diff --git a/Doc/libwhrandom.tex b/Doc/libwhrandom.tex
index cac7de7..7803184 100644
--- a/Doc/libwhrandom.tex
+++ b/Doc/libwhrandom.tex
@@ -11,7 +11,7 @@ class that is also named \code{whrandom}.  Instances of the
 Chooses a random element from the non-empty sequence \var{seq} and returns it.
 \end{funcdesc}
 
-\begin{funcdesc}{randint}{a\, b}
+\begin{funcdesc}{randint}{a, b}
 Returns a random integer \var{N} such that \code{\var{a}<=\var{N}<=\var{b}}.
 \end{funcdesc}
 
@@ -19,7 +19,7 @@ Returns a random integer \var{N} such that \code{\var{a}<=\var{N}<=\var{b}}.
 Returns the next random floating point number in the range [0.0 ... 1.0).
 \end{funcdesc}
 
-\begin{funcdesc}{seed}{x\, y\, z}
+\begin{funcdesc}{seed}{x, y, z}
 Initializes the random number generator from the integers
 \var{x},
 \var{y}
@@ -29,7 +29,7 @@ When the module is first imported, the random number is initialized
 using values derived from the current time.
 \end{funcdesc}
 
-\begin{funcdesc}{uniform}{a\, b}
+\begin{funcdesc}{uniform}{a, b}
 Returns a random real number \var{N} such that \code{\var{a}<=\var{N}<\var{b}}.
 \end{funcdesc}
 
diff --git a/Doc/libxdrlib.tex b/Doc/libxdrlib.tex
index 221a578..62e9df7 100644
--- a/Doc/libxdrlib.tex
+++ b/Doc/libxdrlib.tex
@@ -96,7 +96,7 @@ the individual item.  At the end of the list, an unsigned integer
 \code{0} is packed.
 \end{funcdesc}
 
-\begin{funcdesc}{pack_farray}{n\, array\, pack_item}
+\begin{funcdesc}{pack_farray}{n, array, pack_item}
 Packs a fixed length list (\var{array}) of homogeneous items.  \var{n}
 is the length of the list; it is \emph{not} packed into the buffer,
 but a \exception{ValueError} exception is raised if
@@ -104,7 +104,7 @@ but a \exception{ValueError} exception is raised if
 \var{pack_item} is the function used to pack each element.
 \end{funcdesc}
 
-\begin{funcdesc}{pack_array}{list\, pack_item}
+\begin{funcdesc}{pack_array}{list, pack_item}
 Packs a variable length \var{list} of homogeneous items.  First, the
 length of the list is packed as an unsigned integer, then each element
 is packed as in \method{pack_farray()} above.
@@ -192,7 +192,7 @@ then the item is unpacked and appended to the list.  A flag of
 function that is called to unpack the items.
 \end{funcdesc}
 
-\begin{funcdesc}{unpack_farray}{n\, unpack_item}
+\begin{funcdesc}{unpack_farray}{n, unpack_item}
 Unpacks and returns (as a list) a fixed length array of homogeneous
 items.  \var{n} is number of list elements to expect in the buffer.
 As above, \var{unpack_item} is the function used to unpack each element.
diff --git a/Doc/libxmllib.tex b/Doc/libxmllib.tex
index ba9e006..efc7f00 100644
--- a/Doc/libxmllib.tex
+++ b/Doc/libxmllib.tex
@@ -78,7 +78,7 @@ The base implementation simply calls \var{method} with \var{attributes}
 as the only argument.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_endtag}{tag\, method}
+\begin{funcdesc}{handle_endtag}{tag, method}
 This method is called to handle endtags for which an
 \code{end_\var{tag}()} method has been defined.  The \var{tag}
 argument is the name of the tag, and the
@@ -170,7 +170,7 @@ raise a \exception{RuntimeError} without first calling
 \method{syntax_error()}.
 \end{funcdesc}
 
-\begin{funcdesc}{unknown_starttag}{tag\, attributes}
+\begin{funcdesc}{unknown_starttag}{tag, attributes}
 This method is called to process an unknown start tag.  It is intended
 to be overridden by a derived class; the base class implementation
 does nothing.
diff --git a/Doc/libzlib.tex b/Doc/libzlib.tex
index 9234c5f..c4ad987 100644
--- a/Doc/libzlib.tex
+++ b/Doc/libzlib.tex
@@ -14,7 +14,7 @@ later version if one is available.
 The available functions in this module are:
 
 \setindexsubitem{(in module zlib)}
-\begin{funcdesc}{adler32}{string\optional{\, value}}
+\begin{funcdesc}{adler32}{string\optional{, value}}
    Computes a Adler-32 checksum of \var{string}.  (An Adler-32
    checksum is almost as reliable as a CRC32 but can be computed much
    more quickly.)  If \var{value} is present, it is used as the
@@ -25,7 +25,7 @@ The available functions in this module are:
    authentication or digital signatures.
 \end{funcdesc}
 
-\begin{funcdesc}{compress}{string\optional{\, level}}
+\begin{funcdesc}{compress}{string\optional{, level}}
 Compresses the data in \var{string}, returning a string contained
 compressed data.  \var{level} is an integer from \code{1} to \code{9}
 controlling the level of compression; \code{1} is fastest and produces
@@ -42,7 +42,7 @@ exception if any error occurs.
   produces the most.  The default value is \code{6}.
 \end{funcdesc}
 
-\begin{funcdesc}{crc32}{string\optional{\, value}}
+\begin{funcdesc}{crc32}{string\optional{, value}}
    Computes a CRC (Cyclic Redundancy Check) sum of \var{string}. If
    \var{value} is present, it is used as the starting value of the
    checksum; otherwise, a fixed default value is used.  This allows
diff --git a/Doc/mac/libctb.tex b/Doc/mac/libctb.tex
index 36d1289..cd8c72c 100644
--- a/Doc/mac/libctb.tex
+++ b/Doc/mac/libctb.tex
@@ -34,7 +34,7 @@ Bits in the status as returned by \var{Status}.
 Return 1 if the communication toolbox is available, zero otherwise.
 \end{funcdesc}
 
-\begin{funcdesc}{CMNew}{name\, sizes}
+\begin{funcdesc}{CMNew}{name, sizes}
 Create a connection object using the connection tool named
 \var{name}. \var{sizes} is a 6-tuple given buffer sizes for data in,
 data out, control in, control out, attention in and attention out.
@@ -77,21 +77,21 @@ Accept (when \var{yesno} is non-zero) or reject an incoming call after
 \var{Listen} returned.
 \end{funcdesc}
 
-\begin{funcdesc}{Close}{timeout\, now}
+\begin{funcdesc}{Close}{timeout, now}
 Close a connection. When \var{now} is zero, the close is orderly
 (i.e.\ outstanding output is flushed, etc.)\ with a timeout of
 \var{timeout} seconds. When \var{now} is non-zero the close is
 immediate, discarding output.
 \end{funcdesc}
 
-\begin{funcdesc}{Read}{len\, chan\, timeout}
+\begin{funcdesc}{Read}{len, chan, timeout}
 Read \var{len} bytes, or until \var{timeout} seconds have passed, from
 the channel \var{chan} (which is one of \var{cmData}, \var{cmCntl} or
 \var{cmAttn}). Return a 2-tuple:\ the data read and the end-of-message
 flag.
 \end{funcdesc}
 
-\begin{funcdesc}{Write}{buf\, chan\, timeout\, eom}
+\begin{funcdesc}{Write}{buf, chan, timeout, eom}
 Write \var{buf} to channel \var{chan}, aborting after \var{timeout}
 seconds. When \var{eom} has the value \var{cmFlagsEOM} an
 end-of-message indicator will be written after the data (if this
diff --git a/Doc/mac/libframework.tex b/Doc/mac/libframework.tex
index 012b8c5..6b8c5fa 100644
--- a/Doc/mac/libframework.tex
+++ b/Doc/mac/libframework.tex
@@ -31,14 +31,14 @@ An object representing the menubar. This object is usually not created
 by the user.
 \end{funcdesc}
 
-\begin{funcdesc}{Menu}{bar\, title\optional{\, after}}
+\begin{funcdesc}{Menu}{bar, title\optional{, after}}
 An object representing a menu. Upon creation you pass the
 \code{MenuBar} the menu appears in, the \var{title} string and a
 position (1-based) \var{after} where the menu should appear (default:
 at the end).
 \end{funcdesc}
 
-\begin{funcdesc}{MenuItem}{menu\, title\optional{\, shortcut\, callback}}
+\begin{funcdesc}{MenuItem}{menu, title\optional{, shortcut, callback}}
 Create a menu item object. The arguments are the menu to crate the
 item it, the item title string and optionally the keyboard shortcut
 and a callback routine. The callback is called with the arguments
@@ -58,7 +58,7 @@ correct dimming for all menu items based on the current front window.
 Add a separator to the end of a menu.
 \end{funcdesc}
 
-\begin{funcdesc}{SubMenu}{menu\, label}
+\begin{funcdesc}{SubMenu}{menu, label}
 Create a submenu named \var{label} under menu \var{menu}. The menu
 object is returned.
 \end{funcdesc}
@@ -72,7 +72,7 @@ which the window belongs. The window is not displayed until later.
 Creates a modeless dialog window.
 \end{funcdesc}
 
-\begin{funcdesc}{windowbounds}{width\, height}
+\begin{funcdesc}{windowbounds}{width, height}
 Return a \code{(left, top, right, bottom)} tuple suitable for creation
 of a window of given width and height. The window will be staggered
 with respect to previous windows, and an attempt is made to keep the
@@ -104,7 +104,7 @@ application. Alternatively, override the \code{do_about} method for
 more elaborate about messages.
 \end{funcdesc}
 
-\begin{funcdesc}{mainloop}{\optional{mask\, wait}}
+\begin{funcdesc}{mainloop}{\optional{mask, wait}}
 This routine is the main event loop, call it to set your application
 rolling. \var{Mask} is the mask of events you want to handle,
 \var{wait} is the number of ticks you want to leave to other
@@ -145,7 +145,7 @@ The old on/off value is returned.
 Terminate the event \code{mainloop} at the next convenient moment.
 \end{funcdesc}
 
-\begin{funcdesc}{do_char}{c\, event}
+\begin{funcdesc}{do_char}{c, event}
 The user typed character \var{c}. The complete details of the event
 can be found in the \var{event} structure. This method can also be
 provided in a \code{Window} object, which overrides the
@@ -181,22 +181,22 @@ Override this method to do any special processing on window
 close. Call \code{self.do_postclose} to cleanup the parent state.
 \end{funcdesc}
 
-\begin{funcdesc}{do_postresize}{width\, height\, macoswindowid}
+\begin{funcdesc}{do_postresize}{width, height, macoswindowid}
 Called after the window is resized. Override if more needs to be done
 than calling \code{InvalRect}.
 \end{funcdesc}
 
-\begin{funcdesc}{do_contentclick}{local\, modifiers\, event}
+\begin{funcdesc}{do_contentclick}{local, modifiers, event}
 The user clicked in the content part of a window. The arguments are
 the coordinates (window-relative), the key modifiers and the raw
 event.
 \end{funcdesc}
 
-\begin{funcdesc}{do_update}{macoswindowid\, event}
+\begin{funcdesc}{do_update}{macoswindowid, event}
 An update event for the window was received. Redraw the window.
 \end{funcdesc}
 
-\begin{funcdesc}{do_activate}{activate\, event}
+\begin{funcdesc}{do_activate}{activate, event}
 The window was activated (\code{activate==1}) or deactivated
 (\code{activate==0}). Handle things like focus highlighting, etc.
 \end{funcdesc}
@@ -208,7 +208,7 @@ ControlsWindow objects have the following methods besides those of
 
 \setindexsubitem{(ControlsWindow method)}
 
-\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event}
+\begin{funcdesc}{do_controlhit}{window, control, pcode, event}
 Part \code{pcode} of control \code{control} was hit by the
 user. Tracking and such has already been taken care of.
 \end{funcdesc}
@@ -220,7 +220,7 @@ extra methods:
 
 \setindexsubitem{(ScrolledWindow method)}
 
-\begin{funcdesc}{scrollbars}{\optional{wantx\, wanty}}
+\begin{funcdesc}{scrollbars}{\optional{wantx, wanty}}
 Create (or destroy) horizontal and vertical scrollbars. The arguments
 specify which you want (default: both). The scrollbars always have
 minimum \code{0} and maximum \code{32767}.
@@ -238,32 +238,32 @@ Call this method when the document has changed. It will call
 \code{getscrollbarvalues} and update the scrollbars.
 \end{funcdesc}
 
-\begin{funcdesc}{scrollbar_callback}{which\, what\, value}
+\begin{funcdesc}{scrollbar_callback}{which, what, value}
 Supplied by you and called after user interaction. \code{Which} will
 be \code{'x'} or \code{'y'}, \code{what} will be \code{'-'},
 \code{'--'}, \code{'set'}, \code{'++'} or \code{'+'}. For
 \code{'set'}, \code{value} will contain the new scrollbar position.
 \end{funcdesc}
 
-\begin{funcdesc}{scalebarvalues}{absmin\, absmax\, curmin\, curmax}
+\begin{funcdesc}{scalebarvalues}{absmin, absmax, curmin, curmax}
 Auxiliary method to help you calculate values to return from
 \code{getscrollbarvalues}. You pass document minimum and maximum value
 and topmost (leftmost) and bottommost (rightmost) visible values and
 it returns the correct number or \code{None}.
 \end{funcdesc}
 
-\begin{funcdesc}{do_activate}{onoff\, event}
+\begin{funcdesc}{do_activate}{onoff, event}
 Takes care of dimming/highlighting scrollbars when a window becomes
 frontmost vv. If you override this method call this one at the end of
 your method.
 \end{funcdesc}
 
-\begin{funcdesc}{do_postresize}{width\, height\, window}
+\begin{funcdesc}{do_postresize}{width, height, window}
 Moves scrollbars to the correct position. Call this method initially
 if you override it.
 \end{funcdesc}
 
-\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event}
+\begin{funcdesc}{do_controlhit}{window, control, pcode, event}
 Handles scrollbar interaction. If you override it call this method
 first, a nonzero return value indicates the hit was in the scrollbars
 and has been handled.
@@ -281,7 +281,7 @@ Create the dialog window, from the DLOG resource with id
 \var{resid}. The dialog object is stored in \code{self.wid}.
 \end{funcdesc}
 
-\begin{funcdesc}{do_itemhit}{item\, event}
+\begin{funcdesc}{do_itemhit}{item, event}
 Item number \var{item} was hit. You are responsible for redrawing
 toggle buttons, etc.
 \end{funcdesc}
diff --git a/Doc/mac/libmacconsole.tex b/Doc/mac/libmacconsole.tex
index bd601b9..1916025 100644
--- a/Doc/mac/libmacconsole.tex
+++ b/Doc/mac/libmacconsole.tex
@@ -95,7 +95,7 @@ displayed in inverse video (this disables the upper half of a
 non-\ASCII{} character set).
 \end{funcdesc}
 
-\begin{funcdesc}{gotoxy}{x\, y}
+\begin{funcdesc}{gotoxy}{x, y}
 Set the cursor to position \code{(\var{x}, \var{y})}.
 \end{funcdesc}
 
diff --git a/Doc/mac/libmacfs.tex b/Doc/mac/libmacfs.tex
index 647e004..5373d31 100644
--- a/Doc/mac/libmacfs.tex
+++ b/Doc/mac/libmacfs.tex
@@ -2,16 +2,16 @@
 \label{module-macfs}
 \bimodindex{macfs}
 
-\setindexsubitem{(in module macfs)}
 
-This module provides access to macintosh FSSpec handling, the Alias
+This module provides access to Macintosh FSSpec handling, the Alias
 Manager, finder aliases and the Standard File package.
 
 Whenever a function or method expects a \var{file} argument, this
 argument can be one of three things:\ (1) a full or partial Macintosh
-pathname, (2) an FSSpec object or (3) a 3-tuple \code{(wdRefNum,
-parID, name)} as described in Inside Mac VI\@. A description of aliases
-and the standard file package can also be found there.
+pathname, (2) an FSSpec object or (3) a 3-tuple \code{(\var{wdRefNum},
+\var{parID}, \var{name})} as described in \emph{Inside Macintosh
+VI}\@. A description of aliases and the standard file package can also
+be found there.
 
 \begin{funcdesc}{FSSpec}{file}
 Create an FSSpec object for the specified file.
@@ -41,7 +41,7 @@ Resolve an alias file. Returns a 3-tuple \code{(\var{fsspec}, \var{isfolder},
 (otherwise the FSSpec object for the file itself is returned).
 \end{funcdesc}
 
-\begin{funcdesc}{StandardGetFile}{\optional{type\, ...}}
+\begin{funcdesc}{StandardGetFile}{\optional{type, ...}}
 Present the user with a standard ``open input file''
 dialog. Optionally, you can pass up to four 4-char file types to limit
 the files the user can choose from. The function returns an FSSpec
@@ -49,11 +49,11 @@ object and a flag indicating that the user completed the dialog
 without cancelling.
 \end{funcdesc}
 
-\begin{funcdesc}{PromptGetFile}{prompt\optional{\, type\, ...}}
+\begin{funcdesc}{PromptGetFile}{prompt\optional{, type, ...}}
 Similar to \var{StandardGetFile} but allows you to specify a prompt.
 \end{funcdesc}
 
-\begin{funcdesc}{StandardPutFile}{prompt\, \optional{default}}
+\begin{funcdesc}{StandardPutFile}{prompt, \optional{default}}
 Present the user with a standard ``open output file''
 dialog. \var{prompt} is the prompt string, and the optional
 \var{default} argument initializes the output file name. The function
@@ -79,7 +79,7 @@ behaviour with the ``general controls'' controlpanel, thereby making
 this call inoperative.
 \end{funcdesc}
 
-\begin{funcdesc}{FindFolder}{where\, which\, create}
+\begin{funcdesc}{FindFolder}{where, which, create}
 Locates one of the ``special'' folders that MacOS knows about, such as
 the trash or the Preferences folder. \var{Where} is the disk to
 search, \var{which} is the 4-char string specifying which folder to
@@ -133,7 +133,7 @@ Create a minimal alias pointing to this file.
 Return the 4-char creator and type of the file.
 \end{funcdesc}
 
-\begin{funcdesc}{SetCreatorType}{creator\, type}
+\begin{funcdesc}{SetCreatorType}{creator, type}
 Set the 4-char creator and type of the file.
 \end{funcdesc}
 
@@ -151,7 +151,7 @@ Return a tuple with three floating point values representing the
 creation date, modification date and backup date of the file.
 \end{funcdesc}
 
-\begin{funcdesc}{SetDates}{crdate\, moddate\, backupdate}
+\begin{funcdesc}{SetDates}{crdate, moddate, backupdate}
 Set the creation, modification and backup date of the file. The values
 are in the standard floating point format used for times throughout
 Python.
@@ -179,7 +179,7 @@ is returned.
 An interface to the C routine \code{GetAliasInfo()}.
 \end{funcdesc}
 
-\begin{funcdesc}{Update}{file\, \optional{file2}}
+\begin{funcdesc}{Update}{file, \optional{file2}}
 Update the alias to point to the \var{file} given. If \var{file2} is
 present a relative alias will be created.
 \end{funcdesc}
diff --git a/Doc/mac/libmacostools.tex b/Doc/mac/libmacostools.tex
index 1553b11..c4c5842 100644
--- a/Doc/mac/libmacostools.tex
+++ b/Doc/mac/libmacostools.tex
@@ -9,7 +9,7 @@ The \code{macostools} module defines the following functions:
 
 \setindexsubitem{(in module macostools)}
 
-\begin{funcdesc}{copy}{src\, dst\optional{\, createpath, copytimes}}
+\begin{funcdesc}{copy}{src, dst\optional{, createpath, copytimes}}
 Copy file \var{src} to \var{dst}. The files can be specified as
 pathnames or \code{FSSpec} objects. If \var{createpath} is non-zero
 \var{dst} must be a pathname and the folders leading to the
@@ -22,13 +22,13 @@ If the source is an alias the original to which the alias points is
 copied, not the aliasfile.
 \end{funcdesc}
 
-\begin{funcdesc}{copytree}{src\, dst}
+\begin{funcdesc}{copytree}{src, dst}
 Recursively copy a file tree from \var{src} to \var{dst}, creating
 folders as needed. \var{Src} and \var{dst} should be specified as
 pathnames.
 \end{funcdesc}
 
-\begin{funcdesc}{mkalias}{src\, dst}
+\begin{funcdesc}{mkalias}{src, dst}
 Create a finder alias \var{dst} pointing to \var{src}. Both may be
 specified as pathnames or \var{FSSpec} objects.
 \end{funcdesc}
diff --git a/Doc/mac/libmactcp.tex b/Doc/mac/libmactcp.tex
index f041280..122aa5b 100644
--- a/Doc/mac/libmactcp.tex
+++ b/Doc/mac/libmactcp.tex
@@ -78,13 +78,13 @@ Return the TCP address of this side of a connection as a 2-tuple
 \code{(host, port)}, both integers.
 \end{funcdesc}
 
-\begin{funcdesc}{ActiveOpen}{lport\, host\, rport}
+\begin{funcdesc}{ActiveOpen}{lport, host, rport}
 Open an outgoing connection to TCP address \code{(\var{host}, \var{rport})}. Use
 local port \var{lport} (zero makes the system pick a free port). This
 call blocks until the connection has been established.
 \end{funcdesc}
 
-\begin{funcdesc}{Send}{buf\, push\, urgent}
+\begin{funcdesc}{Send}{buf, push, urgent}
 Send data \var{buf} over the connection. \var{Push} and \var{urgent}
 are flags as specified by the TCP standard.
 \end{funcdesc}
@@ -168,7 +168,7 @@ Read a datagram, waiting at most \var{timeout} seconds (-1 is
 infinite).  Return the data.
 \end{funcdesc}
 
-\begin{funcdesc}{Write}{host\, port\, buf}
+\begin{funcdesc}{Write}{host, port, buf}
 Send \var{buf} as a datagram to IP-address \var{host}, port
 \var{port}.
 \end{funcdesc}
diff --git a/Doc/mac/libmacui.tex b/Doc/mac/libmacui.tex
index 546065f..bf8a30f 100644
--- a/Doc/mac/libmacui.tex
+++ b/Doc/mac/libmacui.tex
@@ -18,7 +18,7 @@ most 255 characters long, is displayed. Control is returned when the
 user clicks ``OK''.
 \end{funcdesc}
 
-\begin{funcdesc}{AskString}{prompt\optional{\, default}}
+\begin{funcdesc}{AskString}{prompt\optional{, default}}
 Ask the user to input a string value, in a modal dialog. \var{Prompt}
 is the promt message, the optional \var{default} arg is the initial
 value for the string. All strings can be at most 255 bytes
@@ -26,7 +26,7 @@ long. \var{AskString} returns the string entered or \code{None} in
 case the user cancelled.
 \end{funcdesc}
 
-\begin{funcdesc}{AskYesNoCancel}{question\optional{\, default}}
+\begin{funcdesc}{AskYesNoCancel}{question\optional{, default}}
 Present a dialog with text \var{question} and three buttons labelled
 ``yes'', ``no'' and ``cancel''. Return \code{1} for yes, \code{0} for
 no and \code{-1} for cancel. The default return value chosen by
@@ -34,7 +34,7 @@ hitting return is \code{0}. This can be changed with the optional
 \var{default} argument.
 \end{funcdesc}
 
-\begin{funcdesc}{ProgressBar}{\optional{label\, maxval}}
+\begin{funcdesc}{ProgressBar}{\optional{label, maxval}}
 Display a modeless progress dialog with a thermometer bar. \var{Label}
 is the textstring displayed (default ``Working...''), \var{maxval} is
 the value at which progress is complete (default 100). The returned
diff --git a/Doc/mac/libminiae.tex b/Doc/mac/libminiae.tex
index 00666fa..d898551 100644
--- a/Doc/mac/libminiae.tex
+++ b/Doc/mac/libminiae.tex
@@ -36,14 +36,14 @@ provide its own windows, etc.
 
 \setindexsubitem{(AEServer method)}
 
-\begin{funcdesc}{installaehandler}{classe\, type\, callback}
+\begin{funcdesc}{installaehandler}{classe, type, callback}
 Installs an AppleEvent handler. \code{Classe} and \code{type} are the
 four-char OSA Class and Type designators, \code{'****'} wildcards are
 allowed. When a matching AppleEvent is received the parameters are
 decoded and your callback is invoked.
 \end{funcdesc}
 
-\begin{funcdesc}{callback}{_object\, **kwargs}
+\begin{funcdesc}{callback}{_object, **kwargs}
 Your callback is called with the OSA Direct Object as first positional
 parameter. The other parameters are passed as keyword arguments, with
 the 4-char designator as name. Three extra keyword parameters are
diff --git a/Doc/templates/module.tex b/Doc/templates/module.tex
index db07934..3fb4f51 100644
--- a/Doc/templates/module.tex
+++ b/Doc/templates/module.tex
@@ -61,7 +61,7 @@ The \module{spam} module defines the following functions:
 % least once in the description; each usage (even inside \code{...})
 % should be enclosed in \var{...}.
 
-\begin{funcdesc}{open}{filename\optional{\, mode\, buffersize}}
+\begin{funcdesc}{open}{filename\optional{, mode, buffersize}}
 Open the file \var{filename} as a can of Spam.  The optional
 \var{mode} and \var{buffersize} arguments specify the read-write mode
 (\code{'r'} (default) or \code{'w'}) and the buffer size (default:
-- 
cgit v0.12

