From cce1090d49ba91cdc06c60d8a2af04d057abe7dc Mon Sep 17 00:00:00 2001 From: Fred Drake Date: Tue, 17 Mar 1998 06:33:25 +0000 Subject: Change "\," to just "," in function signatures. This is easier to maintain, works better with LaTeX2HTML, and allows some simplification of the python.sty macros. --- Doc/lib/libaifc.tex | 8 +-- Doc/lib/libal.tex | 6 +-- Doc/lib/libamoeba.tex | 6 +-- Doc/lib/libanydbm.tex | 2 +- Doc/lib/libarray.tex | 8 +-- Doc/lib/libaudioop.tex | 50 ++++++++--------- Doc/lib/libbasehttp.tex | 6 +-- Doc/lib/libbastion.tex | 2 +- Doc/lib/libbinhex.tex | 4 +- Doc/lib/libcgi.tex | 4 +- Doc/lib/libcrypt.tex | 2 +- Doc/lib/libdbm.tex | 2 +- Doc/lib/libdis.tex | 4 +- Doc/lib/libformatter.tex | 6 +-- Doc/lib/libframework.tex | 36 ++++++------- Doc/lib/libfuncs.tex | 40 +++++++------- Doc/lib/libgdbm.tex | 2 +- Doc/lib/libgl.tex | 6 +-- Doc/lib/libhtmllib.tex | 4 +- Doc/lib/libimageop.tex | 22 ++++---- Doc/lib/libimgfile.tex | 4 +- Doc/lib/libimp.tex | 2 +- Doc/lib/libmailcap.tex | 2 +- Doc/lib/libmimetools.tex | 6 +-- Doc/lib/libminiae.tex | 4 +- Doc/lib/libmpz.tex | 8 +-- Doc/lib/libparser.tex | 6 +-- Doc/lib/libpdb.tex | 6 +-- Doc/lib/libpickle.tex | 2 +- Doc/lib/libposix.tex | 46 ++++++++-------- Doc/lib/libppath.tex | 6 +-- Doc/lib/libprofile.tex | 14 ++--- Doc/lib/libquopri.tex | 4 +- Doc/lib/libregex.tex | 14 ++--- Doc/lib/libregsub.tex | 10 ++-- Doc/lib/librexec.tex | 4 +- Doc/lib/librgbimg.tex | 2 +- Doc/lib/librotor.tex | 2 +- Doc/lib/libselect.tex | 2 +- Doc/lib/libsgmllib.tex | 2 +- Doc/lib/libsignal.tex | 2 +- Doc/lib/libsocket.tex | 6 +-- Doc/lib/libsocksvr.tex | 6 +-- Doc/lib/libstdwin.tex | 66 +++++++++++------------ Doc/lib/libstring.tex | 135 +++++++++++++++++++++++----------------------- Doc/lib/libstruct.tex | 4 +- Doc/lib/libsyslog.tex | 2 +- Doc/lib/libtemplate.tex | 2 +- Doc/lib/libthread.tex | 2 +- Doc/lib/libtypes.tex | 8 +-- Doc/lib/liburllib.tex | 4 +- Doc/lib/liburlparse.tex | 2 +- Doc/lib/libuu.tex | 4 +- Doc/lib/libwhrandom.tex | 6 +-- Doc/lib/libxdrlib.tex | 6 +-- Doc/lib/libxmllib.tex | 4 +- Doc/lib/libzlib.tex | 6 +-- Doc/libaifc.tex | 8 +-- Doc/libal.tex | 6 +-- Doc/libamoeba.tex | 6 +-- Doc/libanydbm.tex | 2 +- Doc/libarray.tex | 8 +-- Doc/libaudioop.tex | 50 ++++++++--------- Doc/libbasehttp.tex | 6 +-- Doc/libbastion.tex | 2 +- Doc/libbinhex.tex | 4 +- Doc/libcgi.tex | 4 +- Doc/libcrypt.tex | 2 +- Doc/libctb.tex | 8 +-- Doc/libdbm.tex | 2 +- Doc/libdis.tex | 4 +- Doc/libformatter.tex | 6 +-- Doc/libframework.tex | 36 ++++++------- Doc/libfuncs.tex | 40 +++++++------- Doc/libgdbm.tex | 2 +- Doc/libgl.tex | 6 +-- Doc/libhtmllib.tex | 4 +- Doc/libimageop.tex | 22 ++++---- Doc/libimgfile.tex | 4 +- Doc/libimp.tex | 2 +- Doc/libmacconsole.tex | 2 +- Doc/libmacfs.tex | 24 ++++----- Doc/libmacostools.tex | 6 +-- Doc/libmactcp.tex | 6 +-- Doc/libmacui.tex | 6 +-- Doc/libmailcap.tex | 2 +- Doc/libmimetools.tex | 6 +-- Doc/libminiae.tex | 4 +- Doc/libmpz.tex | 8 +-- Doc/libparser.tex | 6 +-- Doc/libpdb.tex | 6 +-- Doc/libpickle.tex | 2 +- Doc/libposix.tex | 46 ++++++++-------- Doc/libppath.tex | 6 +-- Doc/libprofile.tex | 14 ++--- Doc/libquopri.tex | 4 +- Doc/libregex.tex | 14 ++--- Doc/libregsub.tex | 10 ++-- Doc/librexec.tex | 4 +- Doc/librgbimg.tex | 2 +- Doc/librotor.tex | 2 +- Doc/libselect.tex | 2 +- Doc/libsgmllib.tex | 2 +- Doc/libsignal.tex | 2 +- Doc/libsocket.tex | 6 +-- Doc/libsocksvr.tex | 6 +-- Doc/libstdwin.tex | 66 +++++++++++------------ Doc/libstring.tex | 135 +++++++++++++++++++++++----------------------- Doc/libstruct.tex | 4 +- Doc/libsyslog.tex | 2 +- Doc/libtemplate.tex | 2 +- Doc/libthread.tex | 2 +- Doc/libtypes.tex | 8 +-- Doc/liburllib.tex | 4 +- Doc/liburlparse.tex | 2 +- Doc/libuu.tex | 4 +- Doc/libwhrandom.tex | 6 +-- Doc/libxdrlib.tex | 6 +-- Doc/libxmllib.tex | 4 +- Doc/libzlib.tex | 6 +-- Doc/mac/libctb.tex | 8 +-- Doc/mac/libframework.tex | 36 ++++++------- Doc/mac/libmacconsole.tex | 2 +- Doc/mac/libmacfs.tex | 24 ++++----- Doc/mac/libmacostools.tex | 6 +-- Doc/mac/libmactcp.tex | 6 +-- Doc/mac/libmacui.tex | 6 +-- Doc/mac/libminiae.tex | 4 +- Doc/templates/module.tex | 2 +- 129 files changed, 705 insertions(+), 703 deletions(-) diff --git a/Doc/lib/libaifc.tex b/Doc/lib/libaifc.tex index 34df720..8bb88a1 100644 --- a/Doc/lib/libaifc.tex +++ b/Doc/lib/libaifc.tex @@ -24,7 +24,7 @@ second's worth occupies 2*2*44100 bytes, i.e.\ 176,400 bytes. Module \code{aifc} defines the following function: \setindexsubitem{(in module aifc)} -\begin{funcdesc}{open}{file\, mode} +\begin{funcdesc}{open}{file, mode} Open an AIFF or AIFF-C file and return an object instance with methods that are described below. The argument file is either a string naming a file or a file object. The mode is either the string @@ -146,7 +146,7 @@ If this parameter is not set, or not set correctly, the file needs to support seeking. \end{funcdesc} -\begin{funcdesc}{setcomptype}{type\, name} +\begin{funcdesc}{setcomptype}{type, name} Specify the compression type. If not specified, the audio data will not be compressed. In AIFF files, compression is not possible. The name parameter should be a human-readable description of the @@ -155,14 +155,14 @@ string. Currently the following compression types are supported: NONE, ULAW, ALAW, G722. \end{funcdesc} -\begin{funcdesc}{setparams}{nchannels\, sampwidth\, framerate\, comptype\, compname} +\begin{funcdesc}{setparams}{nchannels, sampwidth, framerate, comptype, compname} Set all the above parameters at once. The argument is a tuple consisting of the various parameters. This means that it is possible to use the result of a \code{getparams()} call as argument to \code{setparams()}. \end{funcdesc} -\begin{funcdesc}{setmark}{id\, pos\, name} +\begin{funcdesc}{setmark}{id, pos, name} Add a mark with the given id (larger than 0), and the given name at the given position. This method can be called at any time before \code{close()}. diff --git a/Doc/lib/libal.tex b/Doc/lib/libal.tex index 63bdf1b..1126f83 100644 --- a/Doc/lib/libal.tex +++ b/Doc/lib/libal.tex @@ -27,7 +27,7 @@ The module defines the following functions: \setindexsubitem{(in module al)} -\begin{funcdesc}{openport}{name\, direction\optional{\, config}} +\begin{funcdesc}{openport}{name, direction\optional{, config}} The name and direction arguments are strings. The optional config argument is a configuration object as returned by \code{al.newconfig()}. The return value is an \dfn{port object}; @@ -44,12 +44,12 @@ The device argument is an integer. The return value is a list of integers containing the data returned by ALqueryparams(). \end{funcdesc} -\begin{funcdesc}{getparams}{device\, list} +\begin{funcdesc}{getparams}{device, list} The device argument is an integer. The list argument is a list such as returned by \code{queryparams}; it is modified in place (!). \end{funcdesc} -\begin{funcdesc}{setparams}{device\, list} +\begin{funcdesc}{setparams}{device, list} The device argument is an integer. The list argument is a list such as returned by \code{al.queryparams}. \end{funcdesc} diff --git a/Doc/lib/libamoeba.tex b/Doc/lib/libamoeba.tex index d471f35..3e64257 100644 --- a/Doc/lib/libamoeba.tex +++ b/Doc/lib/libamoeba.tex @@ -12,7 +12,7 @@ the exception \code{amoeba.error = 'amoeba.error'}. The module \code{amoeba} defines the following items: \setindexsubitem{(in module amoeba)} -\begin{funcdesc}{name_append}{path\, cap} +\begin{funcdesc}{name_append}{path, cap} Stores a capability in the Amoeba directory tree. Arguments are the pathname (a string) and the capability (a capability object as returned by @@ -32,7 +32,7 @@ Returns a object, to which various interesting operations apply, described below. \end{funcdesc} -\begin{funcdesc}{name_replace}{path\, cap} +\begin{funcdesc}{name_replace}{path, cap} Replaces a capability in the Amoeba directory tree. Arguments are the pathname and the new capability. (This differs from @@ -91,7 +91,7 @@ The following methods are defined for capability objects. Returns a list of the names of the entries in an Amoeba directory. \end{funcdesc} -\begin{funcdesc}{b_read}{offset\, maxsize} +\begin{funcdesc}{b_read}{offset, maxsize} Reads (at most) \var{maxsize} bytes from a bullet file at offset diff --git a/Doc/lib/libanydbm.tex b/Doc/lib/libanydbm.tex index c7e5ae3..1c46c61 100644 --- a/Doc/lib/libanydbm.tex +++ b/Doc/lib/libanydbm.tex @@ -13,7 +13,7 @@ will be used. Both modules provide the same interface: % at the same time. \setindexsubitem{(in modules anydbm, dumbdbm)} -\begin{funcdesc}{open}{filename\optional{\, flag\, mode}} +\begin{funcdesc}{open}{filename\optional{, flag, mode}} Open the database file \var{filename} and return a corresponding object. The optional \var{flag} argument can be \code{'r'} to open an existing database for reading only, diff --git a/Doc/lib/libarray.tex b/Doc/lib/libarray.tex index 0380bd6..03b4933 100644 --- a/Doc/lib/libarray.tex +++ b/Doc/lib/libarray.tex @@ -35,7 +35,7 @@ See also built-in module \module{struct}\refbimodindex{struct}. The module defines the following function: -\begin{funcdesc}{array}{typecode\optional{\, initializer}} +\begin{funcdesc}{array}{typecode\optional{, initializer}} Return a new array whose items are restricted by \var{typecode}, and initialized from the optional \var{initializer} value, which must be a list or a string. The list or string is passed to the new array's @@ -77,7 +77,7 @@ integer values. It is useful when reading data from a file written on a machine with a different byte order. \end{funcdesc} -\begin{funcdesc}{fromfile}{f\, n} +\begin{funcdesc}{fromfile}{f, n} Read \var{n} items (as machine values) from the file object \var{f} and append them to the end of the array. If less than \var{n} items are available, \exception{EOFError} is raised, but the items that were @@ -98,12 +98,12 @@ array of machine values (i.e. as if it had been read from a file using the \method{fromfile()} method). \end{funcdesc} -\begin{funcdesc}{insert}{i\, x} +\begin{funcdesc}{insert}{i, x} Insert a new item with value \var{x} in the array before position \var{i}. \end{funcdesc} -\begin{funcdesc}{read}{f\, n} +\begin{funcdesc}{read}{f, n} \deprecated {1.5.1} {Use the \method{fromfile()} method.} Read \var{n} items (as machine values) from the file object \var{f} diff --git a/Doc/lib/libaudioop.tex b/Doc/lib/libaudioop.tex index 69a3a83..887cac9 100644 --- a/Doc/lib/libaudioop.tex +++ b/Doc/lib/libaudioop.tex @@ -19,46 +19,46 @@ This exception is raised on all errors, such as unknown number of bytes per sample, etc. \end{excdesc} -\begin{funcdesc}{add}{fragment1\, fragment2\, width} +\begin{funcdesc}{add}{fragment1, fragment2, width} Return a fragment which is the addition of the two samples passed as parameters. \var{width} is the sample width in bytes, either \code{1}, \code{2} or \code{4}. Both fragments should have the same length. \end{funcdesc} -\begin{funcdesc}{adpcm2lin}{adpcmfragment\, width\, state} +\begin{funcdesc}{adpcm2lin}{adpcmfragment, width, state} Decode an Intel/DVI ADPCM coded fragment to a linear fragment. See the description of \code{lin2adpcm} for details on ADPCM coding. Return a tuple \code{(\var{sample}, \var{newstate})} where the sample has the width specified in \var{width}. \end{funcdesc} -\begin{funcdesc}{adpcm32lin}{adpcmfragment\, width\, state} +\begin{funcdesc}{adpcm32lin}{adpcmfragment, width, state} Decode an alternative 3-bit ADPCM code. See \code{lin2adpcm3} for details. \end{funcdesc} -\begin{funcdesc}{avg}{fragment\, width} +\begin{funcdesc}{avg}{fragment, width} Return the average over all samples in the fragment. \end{funcdesc} -\begin{funcdesc}{avgpp}{fragment\, width} +\begin{funcdesc}{avgpp}{fragment, width} Return the average peak-peak value over all samples in the fragment. No filtering is done, so the usefulness of this routine is questionable. \end{funcdesc} -\begin{funcdesc}{bias}{fragment\, width\, bias} +\begin{funcdesc}{bias}{fragment, width, bias} Return a fragment that is the original fragment with a bias added to each sample. \end{funcdesc} -\begin{funcdesc}{cross}{fragment\, width} +\begin{funcdesc}{cross}{fragment, width} Return the number of zero crossings in the fragment passed as an argument. \end{funcdesc} -\begin{funcdesc}{findfactor}{fragment\, reference} +\begin{funcdesc}{findfactor}{fragment, reference} Return a factor \var{F} such that \code{rms(add(fragment, mul(reference, -F)))} is minimal, i.e., return the factor with which you should multiply \var{reference} to @@ -68,7 +68,7 @@ should both contain 2-byte samples. The time taken by this routine is proportional to \code{len(fragment)}. \end{funcdesc} -\begin{funcdesc}{findfit}{fragment\, reference} +\begin{funcdesc}{findfit}{fragment, reference} This routine (which only accepts 2-byte sample fragments) Try to match \var{reference} as well as possible to a portion of @@ -82,7 +82,7 @@ and \var{factor} is the (floating-point) factor as per \code{findfactor}. \end{funcdesc} -\begin{funcdesc}{findmax}{fragment\, length} +\begin{funcdesc}{findmax}{fragment, length} Search \var{fragment} for a slice of length \var{length} samples (not bytes!)\ with maximum energy, i.e., return \var{i} for which \code{rms(fragment[i*2:(i+length)*2])} is maximal. The fragments @@ -91,15 +91,15 @@ should both contain 2-byte samples. The routine takes time proportional to \code{len(fragment)}. \end{funcdesc} -\begin{funcdesc}{getsample}{fragment\, width\, index} +\begin{funcdesc}{getsample}{fragment, width, index} Return the value of sample \var{index} from the fragment. \end{funcdesc} -\begin{funcdesc}{lin2lin}{fragment\, width\, newwidth} +\begin{funcdesc}{lin2lin}{fragment, width, newwidth} Convert samples between 1-, 2- and 4-byte formats. \end{funcdesc} -\begin{funcdesc}{lin2adpcm}{fragment\, width\, state} +\begin{funcdesc}{lin2adpcm}{fragment, width, state} Convert samples to 4 bit Intel/DVI ADPCM encoding. ADPCM coding is an adaptive coding scheme, whereby each 4 bit number is the difference between one sample and the next, divided by a (varying) step. The @@ -113,41 +113,41 @@ initial call \code{None} can be passed as the state. \var{adpcmfrag} is the ADPCM coded fragment packed 2 4-bit values per byte. \end{funcdesc} -\begin{funcdesc}{lin2adpcm3}{fragment\, width\, state} +\begin{funcdesc}{lin2adpcm3}{fragment, width, state} This is an alternative ADPCM coder that uses only 3 bits per sample. It is not compatible with the Intel/DVI ADPCM coder and its output is not packed (due to laziness on the side of the author). Its use is discouraged. \end{funcdesc} -\begin{funcdesc}{lin2ulaw}{fragment\, width} +\begin{funcdesc}{lin2ulaw}{fragment, width} Convert samples in the audio fragment to U-LAW encoding and return this as a Python string. U-LAW is an audio encoding format whereby you get a dynamic range of about 14 bits using only 8 bit samples. It is used by the Sun audio hardware, among others. \end{funcdesc} -\begin{funcdesc}{minmax}{fragment\, width} +\begin{funcdesc}{minmax}{fragment, width} Return a tuple consisting of the minimum and maximum values of all samples in the sound fragment. \end{funcdesc} -\begin{funcdesc}{max}{fragment\, width} +\begin{funcdesc}{max}{fragment, width} Return the maximum of the \emph{absolute value} of all samples in a fragment. \end{funcdesc} -\begin{funcdesc}{maxpp}{fragment\, width} +\begin{funcdesc}{maxpp}{fragment, width} Return the maximum peak-peak value in the sound fragment. \end{funcdesc} -\begin{funcdesc}{mul}{fragment\, width\, factor} +\begin{funcdesc}{mul}{fragment, width, factor} Return a fragment that has all samples in the original framgent multiplied by the floating-point value \var{factor}. Overflow is silently ignored. \end{funcdesc} -\begin{funcdesc}{ratecv}{fragment\, width\, nchannels\, inrate\, outrate\, state\optional{\, weightA\, weightB}} +\begin{funcdesc}{ratecv}{fragment, width, nchannels, inrate, outrate, state\optional{, weightA, weightB}} Convert the frame rate of the input fragment. \code{State} is a tuple containing the state of the converter. The @@ -158,11 +158,11 @@ The \code{weightA} and \code{weightB} arguments are parameters for a simple digital filter and default to 1 and 0 respectively. \end{funcdesc} -\begin{funcdesc}{reverse}{fragment\, width} +\begin{funcdesc}{reverse}{fragment, width} Reverse the samples in a fragment and returns the modified fragment. \end{funcdesc} -\begin{funcdesc}{rms}{fragment\, width} +\begin{funcdesc}{rms}{fragment, width} Return the root-mean-square of the fragment, i.e. \iftexi the square root of the quotient of the sum of all squared sample value, @@ -177,20 +177,20 @@ divided by the sumber of samples. This is a measure of the power in an audio signal. \end{funcdesc} -\begin{funcdesc}{tomono}{fragment\, width\, lfactor\, rfactor} +\begin{funcdesc}{tomono}{fragment, width, lfactor, rfactor} Convert a stereo fragment to a mono fragment. The left channel is multiplied by \var{lfactor} and the right channel by \var{rfactor} before adding the two channels to give a mono signal. \end{funcdesc} -\begin{funcdesc}{tostereo}{fragment\, width\, lfactor\, rfactor} +\begin{funcdesc}{tostereo}{fragment, width, lfactor, rfactor} Generate a stereo fragment from a mono fragment. Each pair of samples in the stereo fragment are computed from the mono sample, whereby left channel samples are multiplied by \var{lfactor} and right channel samples by \var{rfactor}. \end{funcdesc} -\begin{funcdesc}{ulaw2lin}{fragment\, width} +\begin{funcdesc}{ulaw2lin}{fragment, width} Convert sound fragments in ULAW encoding to linearly encoded sound fragments. ULAW encoding always uses 8 bits samples, so \var{width} refers only to the sample width of the output fragment here. diff --git a/Doc/lib/libbasehttp.tex b/Doc/lib/libbasehttp.tex index 12d9483..2a4a7d0 100644 --- a/Doc/lib/libbasehttp.tex +++ b/Doc/lib/libbasehttp.tex @@ -157,7 +157,7 @@ followed by text composed using the \member{error_message_format} class variable. \end{funcdesc} -\begin{funcdesc}{send_response}{code\optional{\, message}} +\begin{funcdesc}{send_response}{code\optional{, message}} Sends a response header and logs the accepted request. The HTTP response line is sent, followed by \emph{Server} and \emph{Date} headers. The values for these two headers are picked up from the @@ -165,7 +165,7 @@ headers. The values for these two headers are picked up from the respectively. \end{funcdesc} -\begin{funcdesc}{send_header}{keyword\, value} +\begin{funcdesc}{send_header}{keyword, value} Writes a specific MIME header to the output stream. \var{keyword} should specify the header keyword, with \var{value} specifying its value. @@ -176,7 +176,7 @@ Sends a blank line, indicating the end of the MIME headers in the response. \end{funcdesc} -\begin{funcdesc}{log_request}{\optional{code\optional{\, size}}} +\begin{funcdesc}{log_request}{\optional{code\optional{, size}}} Logs an accepted (successful) request. \var{code} should specify the numeric HTTP code associated with the response. If a size of the response is available, then it should be passed as the diff --git a/Doc/lib/libbastion.tex b/Doc/lib/libbastion.tex index 7b7cba6..c405c64 100644 --- a/Doc/lib/libbastion.tex +++ b/Doc/lib/libbastion.tex @@ -17,7 +17,7 @@ other, unsafe attributes. % I've punted on the issue of documenting keyword arguments for now. -\begin{funcdesc}{Bastion}{object\optional{\, filter\, name\, class}} +\begin{funcdesc}{Bastion}{object\optional{, filter, name, class}} Protect the object \var{object}, returning a bastion for the object. Any attempt to access one of the object's attributes will have to be approved by the \var{filter} function; if the access is diff --git a/Doc/lib/libbinhex.tex b/Doc/lib/libbinhex.tex index aae5074..560b401 100644 --- a/Doc/lib/libbinhex.tex +++ b/Doc/lib/libbinhex.tex @@ -11,14 +11,14 @@ The \code{binhex} module defines the following functions: \setindexsubitem{(in module binhex)} -\begin{funcdesc}{binhex}{input\, output} +\begin{funcdesc}{binhex}{input, output} Convert a binary file with filename \var{input} to binhex file \var{output}. The \var{output} parameter can either be a filename or a file-like object (any object supporting a \var{write} and \var{close} method). \end{funcdesc} -\begin{funcdesc}{hexbin}{input\optional{\, output}} +\begin{funcdesc}{hexbin}{input\optional{, output}} Decode a binhex file \var{input}. \var{input} may be a filename or a file-like object supporting \var{read} and \var{close} methods. The resulting file is written to a file named \var{output}, unless the diff --git a/Doc/lib/libcgi.tex b/Doc/lib/libcgi.tex index fa2b6b7..55abd10 100644 --- a/Doc/lib/libcgi.tex +++ b/Doc/lib/libcgi.tex @@ -191,7 +191,7 @@ Parse a query string given as a string argument (data of type \mimetype{application/x-www-form-urlencoded}). \end{funcdesc} -\begin{funcdesc}{parse_multipart}{fp\, pdict} +\begin{funcdesc}{parse_multipart}{fp, pdict} Parse input of type \mimetype{multipart/form-data} (for file uploads). Arguments are \var{fp} for the input file and \var{pdict} for the dictionary containing other parameters of @@ -236,7 +236,7 @@ Print a list of useful (used by CGI) environment variables in HTML. \end{funcdesc} -\begin{funcdesc}{escape}{s\optional{\, quote}} +\begin{funcdesc}{escape}{s\optional{, quote}} Convert the characters \character{\&}, \character{<} and \character{>} in string \var{s} to HTML-safe sequences. Use this if you need to display text that might diff --git a/Doc/lib/libcrypt.tex b/Doc/lib/libcrypt.tex index 777f87e..a4c0bb7 100644 --- a/Doc/lib/libcrypt.tex +++ b/Doc/lib/libcrypt.tex @@ -10,7 +10,7 @@ attempting to crack \UNIX{} passwords with a dictionary. \index{crypt(3)} \setindexsubitem{(in module crypt)} -\begin{funcdesc}{crypt}{word\, salt} +\begin{funcdesc}{crypt}{word, salt} \var{word} will usually be a user's password. \var{salt} is a 2-character string which will be used to select one of 4096 variations of DES\indexii{cipher}{DES}. The characters in \var{salt} must be diff --git a/Doc/lib/libdbm.tex b/Doc/lib/libdbm.tex index 416a6b0..35e0b4c 100644 --- a/Doc/lib/libdbm.tex +++ b/Doc/lib/libdbm.tex @@ -20,7 +20,7 @@ Raised on dbm-specific errors, such as I/O errors. \code{KeyError} is raised for general mapping errors like specifying an incorrect key. \end{excdesc} -\begin{funcdesc}{open}{filename\, \optional{flag\, \optional{mode}}} +\begin{funcdesc}{open}{filename, \optional{flag, \optional{mode}}} Open a dbm database and return a dbm object. The \var{filename} argument is the name of the database file (without the \file{.dir} or \file{.pag} extensions). diff --git a/Doc/lib/libdis.tex b/Doc/lib/libdis.tex index b4c74fb..e11a1f6 100644 --- a/Doc/lib/libdis.tex +++ b/Doc/lib/libdis.tex @@ -49,7 +49,7 @@ traceback if none was passed. The instruction causing the exception is indicated. \end{funcdesc} -\begin{funcdesc}{disassemble}{code\optional{\, lasti}} +\begin{funcdesc}{disassemble}{code\optional{, lasti}} Disassembles a code object, indicating the last instruction if \var{lasti} was provided. The output is divided in the following columns: \begin{itemize} @@ -65,7 +65,7 @@ variable names, constant values, branch targets, and compare operators. \end{funcdesc} -\begin{funcdesc}{disco}{code\optional{\, lasti}} +\begin{funcdesc}{disco}{code\optional{, lasti}} A synonym for disassemble. It is more convenient to type, and kept for compatibility with earlier Python releases. \end{funcdesc} diff --git a/Doc/lib/libformatter.tex b/Doc/lib/libformatter.tex index 8c9ab3e..5d06995 100644 --- a/Doc/lib/libformatter.tex +++ b/Doc/lib/libformatter.tex @@ -66,7 +66,7 @@ Add a hard line break if one does not already exist. This does not break the logical paragraph. \end{funcdesc} -\begin{funcdesc}{add_hor_rule}{*args\, **kw} +\begin{funcdesc}{add_hor_rule}{*args, **kw} Insert a horizontal rule in the output. A hard break is inserted if there is data in the current paragraph, but the logical paragraph is not broken. The arguments and keywords are passed on to the writer's @@ -268,7 +268,7 @@ lines, or the equivelent. The \var{blankline} value will be an integer. \end{funcdesc} -\begin{funcdesc}{send_hor_rule}{*args\, **kw} +\begin{funcdesc}{send_hor_rule}{*args, **kw} Display a horizontal rule on the output device. The arguments to this method are entirely application- and writer-specific, and should be interpreted with care. The method implementation may assume that a @@ -317,7 +317,7 @@ else. Each method simply announces itself by printing its name and arguments on standard output. \end{classdesc} -\begin{classdesc}{DumbWriter}{\optional{file\optional{\, maxcol\code{ = 72}}}} +\begin{classdesc}{DumbWriter}{\optional{file\optional{, maxcol\code{ = 72}}}} Simple writer class which writes output on the file object passed in as \var{file} or, if \var{file} is omitted, on standard output. The output is simply word-wrapped to the number of columns specified by diff --git a/Doc/lib/libframework.tex b/Doc/lib/libframework.tex index 012b8c5..6b8c5fa 100644 --- a/Doc/lib/libframework.tex +++ b/Doc/lib/libframework.tex @@ -31,14 +31,14 @@ An object representing the menubar. This object is usually not created by the user. \end{funcdesc} -\begin{funcdesc}{Menu}{bar\, title\optional{\, after}} +\begin{funcdesc}{Menu}{bar, title\optional{, after}} An object representing a menu. Upon creation you pass the \code{MenuBar} the menu appears in, the \var{title} string and a position (1-based) \var{after} where the menu should appear (default: at the end). \end{funcdesc} -\begin{funcdesc}{MenuItem}{menu\, title\optional{\, shortcut\, callback}} +\begin{funcdesc}{MenuItem}{menu, title\optional{, shortcut, callback}} Create a menu item object. The arguments are the menu to crate the item it, the item title string and optionally the keyboard shortcut and a callback routine. The callback is called with the arguments @@ -58,7 +58,7 @@ correct dimming for all menu items based on the current front window. Add a separator to the end of a menu. \end{funcdesc} -\begin{funcdesc}{SubMenu}{menu\, label} +\begin{funcdesc}{SubMenu}{menu, label} Create a submenu named \var{label} under menu \var{menu}. The menu object is returned. \end{funcdesc} @@ -72,7 +72,7 @@ which the window belongs. The window is not displayed until later. Creates a modeless dialog window. \end{funcdesc} -\begin{funcdesc}{windowbounds}{width\, height} +\begin{funcdesc}{windowbounds}{width, height} Return a \code{(left, top, right, bottom)} tuple suitable for creation of a window of given width and height. The window will be staggered with respect to previous windows, and an attempt is made to keep the @@ -104,7 +104,7 @@ application. Alternatively, override the \code{do_about} method for more elaborate about messages. \end{funcdesc} -\begin{funcdesc}{mainloop}{\optional{mask\, wait}} +\begin{funcdesc}{mainloop}{\optional{mask, wait}} This routine is the main event loop, call it to set your application rolling. \var{Mask} is the mask of events you want to handle, \var{wait} is the number of ticks you want to leave to other @@ -145,7 +145,7 @@ The old on/off value is returned. Terminate the event \code{mainloop} at the next convenient moment. \end{funcdesc} -\begin{funcdesc}{do_char}{c\, event} +\begin{funcdesc}{do_char}{c, event} The user typed character \var{c}. The complete details of the event can be found in the \var{event} structure. This method can also be provided in a \code{Window} object, which overrides the @@ -181,22 +181,22 @@ Override this method to do any special processing on window close. Call \code{self.do_postclose} to cleanup the parent state. \end{funcdesc} -\begin{funcdesc}{do_postresize}{width\, height\, macoswindowid} +\begin{funcdesc}{do_postresize}{width, height, macoswindowid} Called after the window is resized. Override if more needs to be done than calling \code{InvalRect}. \end{funcdesc} -\begin{funcdesc}{do_contentclick}{local\, modifiers\, event} +\begin{funcdesc}{do_contentclick}{local, modifiers, event} The user clicked in the content part of a window. The arguments are the coordinates (window-relative), the key modifiers and the raw event. \end{funcdesc} -\begin{funcdesc}{do_update}{macoswindowid\, event} +\begin{funcdesc}{do_update}{macoswindowid, event} An update event for the window was received. Redraw the window. \end{funcdesc} -\begin{funcdesc}{do_activate}{activate\, event} +\begin{funcdesc}{do_activate}{activate, event} The window was activated (\code{activate==1}) or deactivated (\code{activate==0}). Handle things like focus highlighting, etc. \end{funcdesc} @@ -208,7 +208,7 @@ ControlsWindow objects have the following methods besides those of \setindexsubitem{(ControlsWindow method)} -\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event} +\begin{funcdesc}{do_controlhit}{window, control, pcode, event} Part \code{pcode} of control \code{control} was hit by the user. Tracking and such has already been taken care of. \end{funcdesc} @@ -220,7 +220,7 @@ extra methods: \setindexsubitem{(ScrolledWindow method)} -\begin{funcdesc}{scrollbars}{\optional{wantx\, wanty}} +\begin{funcdesc}{scrollbars}{\optional{wantx, wanty}} Create (or destroy) horizontal and vertical scrollbars. The arguments specify which you want (default: both). The scrollbars always have minimum \code{0} and maximum \code{32767}. @@ -238,32 +238,32 @@ Call this method when the document has changed. It will call \code{getscrollbarvalues} and update the scrollbars. \end{funcdesc} -\begin{funcdesc}{scrollbar_callback}{which\, what\, value} +\begin{funcdesc}{scrollbar_callback}{which, what, value} Supplied by you and called after user interaction. \code{Which} will be \code{'x'} or \code{'y'}, \code{what} will be \code{'-'}, \code{'--'}, \code{'set'}, \code{'++'} or \code{'+'}. For \code{'set'}, \code{value} will contain the new scrollbar position. \end{funcdesc} -\begin{funcdesc}{scalebarvalues}{absmin\, absmax\, curmin\, curmax} +\begin{funcdesc}{scalebarvalues}{absmin, absmax, curmin, curmax} Auxiliary method to help you calculate values to return from \code{getscrollbarvalues}. You pass document minimum and maximum value and topmost (leftmost) and bottommost (rightmost) visible values and it returns the correct number or \code{None}. \end{funcdesc} -\begin{funcdesc}{do_activate}{onoff\, event} +\begin{funcdesc}{do_activate}{onoff, event} Takes care of dimming/highlighting scrollbars when a window becomes frontmost vv. If you override this method call this one at the end of your method. \end{funcdesc} -\begin{funcdesc}{do_postresize}{width\, height\, window} +\begin{funcdesc}{do_postresize}{width, height, window} Moves scrollbars to the correct position. Call this method initially if you override it. \end{funcdesc} -\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event} +\begin{funcdesc}{do_controlhit}{window, control, pcode, event} Handles scrollbar interaction. If you override it call this method first, a nonzero return value indicates the hit was in the scrollbars and has been handled. @@ -281,7 +281,7 @@ Create the dialog window, from the DLOG resource with id \var{resid}. The dialog object is stored in \code{self.wid}. \end{funcdesc} -\begin{funcdesc}{do_itemhit}{item\, event} +\begin{funcdesc}{do_itemhit}{item, event} Item number \var{item} was hit. You are responsible for redrawing toggle buttons, etc. \end{funcdesc} diff --git a/Doc/lib/libfuncs.tex b/Doc/lib/libfuncs.tex index d00ba10..e914e80 100644 --- a/Doc/lib/libfuncs.tex +++ b/Doc/lib/libfuncs.tex @@ -54,7 +54,7 @@ find the \code{eggs} variable. complex number, its magnitude is returned. \end{funcdesc} -\begin{funcdesc}{apply}{function\, args\optional{, keywords}} +\begin{funcdesc}{apply}{function, args\optional{, keywords}} The \var{function} argument must be a callable object (a user-defined or built-in function or method, or a class object) and the \var{args} argument must be a tuple. The \var{function} is called with @@ -82,20 +82,20 @@ class instances are callable if they have a \method{__call__()} method. inclusive. \end{funcdesc} -\begin{funcdesc}{cmp}{x\, y} +\begin{funcdesc}{cmp}{x, y} Compare the two objects \var{x} and \var{y} and return an integer according to the outcome. The return value is negative if \code{\var{x} < \var{y}}, zero if \code{\var{x} == \var{y}} and strictly positive if \code{\var{x} > \var{y}}. \end{funcdesc} -\begin{funcdesc}{coerce}{x\, y} +\begin{funcdesc}{coerce}{x, y} Return a tuple consisting of the two numeric arguments converted to a common type, using the same rules as used by arithmetic operations. \end{funcdesc} -\begin{funcdesc}{compile}{string\, filename\, kind} +\begin{funcdesc}{compile}{string, filename, kind} Compile the \var{string} into a code object. Code objects can be executed by an \keyword{exec} statement or evaluated by a call to \function{eval()}. The \var{filename} argument should @@ -117,7 +117,7 @@ class instances are callable if they have a \method{__call__()} method. \function{long()} and \function{float()}. \end{funcdesc} -\begin{funcdesc}{delattr}{object\, name} +\begin{funcdesc}{delattr}{object, name} This is a relative of \function{setattr()}. The arguments are an object and a string. The string must be the name of one of the object's attributes. The function deletes @@ -146,7 +146,7 @@ class instances are callable if they have a \method{__call__()} method. \end{verbatim} \end{funcdesc} -\begin{funcdesc}{divmod}{a\, b} +\begin{funcdesc}{divmod}{a, b} Take two numbers as arguments and return a pair of numbers consisting of their quotient and remainder when using long division. With mixed operand types, the rules for binary arithmetic operators apply. For @@ -156,7 +156,7 @@ class instances are callable if they have a \method{__call__()} method. \code{(math.floor(\var{a} / \var{b}), \var{a} \%{} \var{b})}. \end{funcdesc} -\begin{funcdesc}{eval}{expression\optional{\, globals\optional{\, locals}}} +\begin{funcdesc}{eval}{expression\optional{, globals\optional{, locals}}} The arguments are a string and two optional dictionaries. The \var{expression} argument is parsed and evaluated as a Python expression (technically speaking, a condition list) using the @@ -188,7 +188,7 @@ class instances are callable if they have a \method{__call__()} method. \function{execfile()}. \end{funcdesc} -\begin{funcdesc}{execfile}{file\optional{\, globals\optional{\, locals}}} +\begin{funcdesc}{execfile}{file\optional{, globals\optional{, locals}}} This function is similar to the \keyword{exec} statement, but parses a file instead of a string. It is different from the \keyword{import} statement in that it does not @@ -206,7 +206,7 @@ class instances are callable if they have a \method{__call__()} method. \code{None}. \end{funcdesc} -\begin{funcdesc}{filter}{function\, list} +\begin{funcdesc}{filter}{function, list} Construct a list from those elements of \var{list} for which \var{function} returns true. If \var{list} is a string or a tuple, the result also has that type; otherwise it is always a list. If @@ -226,7 +226,7 @@ removed. returned. \end{funcdesc} -\begin{funcdesc}{getattr}{object\, name} +\begin{funcdesc}{getattr}{object, name} The arguments are an object and a string. The string must be the name of one of the object's attributes. The result is the value of that attribute. For example, \code{getattr(\var{x}, @@ -240,7 +240,7 @@ function or method, this is the module where it is defined, not the module from which it is called). \end{funcdesc} -\begin{funcdesc}{hasattr}{object\, name} +\begin{funcdesc}{hasattr}{object, name} The arguments are an object and a string. The result is 1 if the string is the name of one of the object's attributes, 0 if not. (This is implemented by calling \code{getattr(\var{object}, @@ -355,7 +355,7 @@ desired effect. see the description of \function{int()}. \end{funcdesc} -\begin{funcdesc}{map}{function\, list\, ...} +\begin{funcdesc}{map}{function, list, ...} Apply \var{function} to every item of \var{list} and return a list of the results. If additional \var{list} arguments are passed, \var{function} must take that many arguments and is applied to @@ -388,7 +388,7 @@ any kind of sequence; the result is always a list. \exception{OverflowError} exception. \end{funcdesc} -\begin{funcdesc}{open}{filename\optional{\, mode\optional{\, bufsize}}} +\begin{funcdesc}{open}{filename\optional{, mode\optional{, bufsize}}} Return a new file object (described earlier under Built-in Types). The first two arguments are the same as for \code{stdio}'s \cfunction{fopen()}: \var{filename} is the file name to be opened, @@ -423,7 +423,7 @@ there's no reliable way to determine whether this is the case.} \function{chr()}. \end{funcdesc} -\begin{funcdesc}{pow}{x\, y\optional{\, z}} +\begin{funcdesc}{pow}{x, y\optional{, z}} Return \var{x} to the power \var{y}; if \var{z} is present, return \var{x} to the power \var{y}, modulo \var{z} (computed more efficiently than \code{pow(\var{x}, \var{y}) \% \var{z}}). @@ -435,7 +435,7 @@ there's no reliable way to determine whether this is the case.} 35000)} is not allowed. \end{funcdesc} -\begin{funcdesc}{range}{\optional{start\,} stop\optional{\, step}} +\begin{funcdesc}{range}{\optional{start,} stop\optional{, step}} This is a versatile function to create lists containing arithmetic progressions. It is most often used in \keyword{for} loops. The arguments must be plain integers. If the \var{step} argument is @@ -487,7 +487,7 @@ If the \module{readline} module was loaded, then line editing and history features. \end{funcdesc} -\begin{funcdesc}{reduce}{function\, list\optional{\, initializer}} +\begin{funcdesc}{reduce}{function, list\optional{, initializer}} Apply the binary \var{function} to the items of \var{list} so as to reduce the list to a single value. E.g., \code{reduce(lambda x, y: x*y, \var{list}, 1)} returns the product of @@ -551,7 +551,7 @@ to return a string that would yield an object with the same value when passed to \function{eval()}. \end{funcdesc} -\begin{funcdesc}{round}{x\, n} +\begin{funcdesc}{round}{x, n} Return the floating point value \var{x} rounded to \var{n} digits after the decimal point. If \var{n} is omitted, it defaults to zero. The result is a floating point number. Values are rounded to the @@ -560,7 +560,7 @@ when passed to \function{eval()}. \code{round(0.5)} is \code{1.0} and \code{round(-0.5)} is \code{-1.0}). \end{funcdesc} -\begin{funcdesc}{setattr}{object\, name\, value} +\begin{funcdesc}{setattr}{object, name, value} This is the counterpart of \function{getattr()}. The arguments are an object, a string and an arbitrary value. The string must be the name of one of the object's attributes. The function assigns the value to @@ -569,7 +569,7 @@ when passed to \function{eval()}. \code{\var{x}.\var{foobar} = 123}. \end{funcdesc} -\begin{funcdesc}{slice}{\optional{start\,} stop\optional{\, step}} +\begin{funcdesc}{slice}{\optional{start,} stop\optional{, step}} Return a slice object representing the set of indices specified by \code{range(\var{start}, \var{stop}, \var{step})}. The \var{start} and \var{step} arguments default to None. Slice objects have @@ -623,7 +623,7 @@ cannot normally be affected this way, but variables retrieved from other scopes (e.g. modules) can be. This may change.} \end{funcdesc} -\begin{funcdesc}{xrange}{\optional{start\,} stop\optional{\, step}} +\begin{funcdesc}{xrange}{\optional{start,} stop\optional{, step}} This function is very similar to \function{range()}, but returns an ``xrange object'' instead of a list. This is an opaque sequence type which yields the same values as the corresponding list, without diff --git a/Doc/lib/libgdbm.tex b/Doc/lib/libgdbm.tex index 73fc9ab..08d447f 100644 --- a/Doc/lib/libgdbm.tex +++ b/Doc/lib/libgdbm.tex @@ -35,7 +35,7 @@ Raised on \code{gdbm}-specific errors, such as I/O errors. \code{KeyError} is raised for general mapping errors like specifying an incorrect key. \end{excdesc} -\begin{funcdesc}{open}{filename\, \optional{flag\, \optional{mode}}} +\begin{funcdesc}{open}{filename, \optional{flag, \optional{mode}}} Open a \code{gdbm} database and return a \code{gdbm} object. The \var{filename} argument is the name of the database file. diff --git a/Doc/lib/libgl.tex b/Doc/lib/libgl.tex index b694d86..7208695 100644 --- a/Doc/lib/libgl.tex +++ b/Doc/lib/libgl.tex @@ -119,7 +119,7 @@ Similar to but the pairs have the point first and the normal second. \end{funcdesc} -\begin{funcdesc}{nurbssurface}{s_k\, t_k\, ctl\, s_ord\, t_ord\, type} +\begin{funcdesc}{nurbssurface}{s_k, t_k, ctl, s_ord, t_ord, type} % XXX s_k[], t_k[], ctl[][] Defines a nurbs surface. The dimensions of @@ -129,13 +129,13 @@ are computed as follows: \code{[len(\var{t_k}) - \var{t_ord}]}. \end{funcdesc} -\begin{funcdesc}{nurbscurve}{knots\, ctlpoints\, order\, type} +\begin{funcdesc}{nurbscurve}{knots, ctlpoints, order, type} Defines a nurbs curve. The length of ctlpoints is \code{len(\var{knots}) - \var{order}}. \end{funcdesc} -\begin{funcdesc}{pwlcurve}{points\, type} +\begin{funcdesc}{pwlcurve}{points, type} Defines a piecewise-linear curve. \var{points} is a list of points. diff --git a/Doc/lib/libhtmllib.tex b/Doc/lib/libhtmllib.tex index c3c9c9f..dff837c 100644 --- a/Doc/lib/libhtmllib.tex +++ b/Doc/lib/libhtmllib.tex @@ -86,7 +86,7 @@ affects the operation of \method{handle_data()} and \method{save_end()}. \setindexsubitem{(HTMLParser method)} -\begin{funcdesc}{anchor_bgn}{href\, name\, type} +\begin{funcdesc}{anchor_bgn}{href, name, type} This method is called at the start of an anchor region. The arguments correspond to the attributes of the \code{} tag with the same names. The default implementation maintains a list of hyperlinks @@ -100,7 +100,7 @@ implementation adds a textual footnote marker using an index into the list of hyperlinks created by \method{anchor_bgn()}. \end{funcdesc} -\begin{funcdesc}{handle_image}{source\, alt\optional{\, ismap\optional{\, align\optional{\, width\optional{\, height}}}}} +\begin{funcdesc}{handle_image}{source, alt\optional{, ismap\optional{, align\optional{, width\optional{, height}}}}} This method is called to handle images. The default implementation simply passes the \var{alt} value to the \method{handle_data()} method. diff --git a/Doc/lib/libimageop.tex b/Doc/lib/libimageop.tex index e5d494d..4a93487 100644 --- a/Doc/lib/libimageop.tex +++ b/Doc/lib/libimageop.tex @@ -17,7 +17,7 @@ per pixel, etc. \end{excdesc} -\begin{funcdesc}{crop}{image\, psize\, width\, height\, x0\, y0\, x1\, y1} +\begin{funcdesc}{crop}{image, psize, width, height, x0, y0, x1, y1} Return the selected part of \var{image}, which should by \var{width} by \var{height} in size and consist of pixels of \var{psize} bytes. \var{x0}, \var{y0}, \var{x1} and \var{y1} are like @@ -28,14 +28,14 @@ that fall outside the old image will have their value set to zero. If holds for the y coordinates. \end{funcdesc} -\begin{funcdesc}{scale}{image\, psize\, width\, height\, newwidth\, newheight} +\begin{funcdesc}{scale}{image, psize, width, height, newwidth, newheight} Return \var{image} scaled to size \var{newwidth} by \var{newheight}. No interpolation is done, scaling is done by simple-minded pixel duplication or removal. Therefore, computer-generated images or dithered images will not look nice after scaling. \end{funcdesc} -\begin{funcdesc}{tovideo}{image\, psize\, width\, height} +\begin{funcdesc}{tovideo}{image, psize, width, height} Run a vertical low-pass filter over an image. It does so by computing each destination pixel as the average of two vertically-aligned source pixels. The main use of this routine is to forestall excessive @@ -43,18 +43,18 @@ flicker if the image is displayed on a video device that uses interlacing, hence the name. \end{funcdesc} -\begin{funcdesc}{grey2mono}{image\, width\, height\, threshold} +\begin{funcdesc}{grey2mono}{image, width, height, threshold} Convert a 8-bit deep greyscale image to a 1-bit deep image by tresholding all the pixels. The resulting image is tightly packed and is probably only useful as an argument to \code{mono2grey}. \end{funcdesc} -\begin{funcdesc}{dither2mono}{image\, width\, height} +\begin{funcdesc}{dither2mono}{image, width, height} Convert an 8-bit greyscale image to a 1-bit monochrome image using a (simple-minded) dithering algorithm. \end{funcdesc} -\begin{funcdesc}{mono2grey}{image\, width\, height\, p0\, p1} +\begin{funcdesc}{mono2grey}{image, width, height, p0, p1} Convert a 1-bit monochrome image to an 8 bit greyscale or color image. All pixels that are zero-valued on input get value \var{p0} on output and all one-value input pixels get value \var{p1} on output. To @@ -62,26 +62,26 @@ convert a monochrome black-and-white image to greyscale pass the values \code{0} and \code{255} respectively. \end{funcdesc} -\begin{funcdesc}{grey2grey4}{image\, width\, height} +\begin{funcdesc}{grey2grey4}{image, width, height} Convert an 8-bit greyscale image to a 4-bit greyscale image without dithering. \end{funcdesc} -\begin{funcdesc}{grey2grey2}{image\, width\, height} +\begin{funcdesc}{grey2grey2}{image, width, height} Convert an 8-bit greyscale image to a 2-bit greyscale image without dithering. \end{funcdesc} -\begin{funcdesc}{dither2grey2}{image\, width\, height} +\begin{funcdesc}{dither2grey2}{image, width, height} Convert an 8-bit greyscale image to a 2-bit greyscale image with dithering. As for \code{dither2mono}, the dithering algorithm is currently very simple. \end{funcdesc} -\begin{funcdesc}{grey42grey}{image\, width\, height} +\begin{funcdesc}{grey42grey}{image, width, height} Convert a 4-bit greyscale image to an 8-bit greyscale image. \end{funcdesc} -\begin{funcdesc}{grey22grey}{image\, width\, height} +\begin{funcdesc}{grey22grey}{image, width, height} Convert a 2-bit greyscale image to an 8-bit greyscale image. \end{funcdesc} diff --git a/Doc/lib/libimgfile.tex b/Doc/lib/libimgfile.tex index 098d59b..8ec31e3 100644 --- a/Doc/lib/libimgfile.tex +++ b/Doc/lib/libimgfile.tex @@ -30,7 +30,7 @@ the string. This format is suitable to pass to \code{gl.lrectwrite}, for instance. \end{funcdesc} -\begin{funcdesc}{readscaled}{file\, x\, y\, filter\optional{\, blur}} +\begin{funcdesc}{readscaled}{file, x, y, filter\optional{, blur}} This function is identical to read but it returns an image that is scaled to the given \var{x} and \var{y} sizes. If the \var{filter} and \var{blur} parameters are omitted scaling is done by @@ -55,7 +55,7 @@ compatible with SGI GL) or from top to bottom(flag is one, compatible with X). The default is zero. \end{funcdesc} -\begin{funcdesc}{write}{file\, data\, x\, y\, z} +\begin{funcdesc}{write}{file, data, x, y, z} This function writes the RGB or greyscale data in \var{data} to image file \var{file}. \var{x} and \var{y} give the size of the image, \var{z} is 1 for 1 byte greyscale images or 3 for RGB images (which are diff --git a/Doc/lib/libimp.tex b/Doc/lib/libimp.tex index 0d0bccc..5664c81 100644 --- a/Doc/lib/libimp.tex +++ b/Doc/lib/libimp.tex @@ -188,7 +188,7 @@ shared libraries is highly system dependent, and not all systems support it.) \end{funcdesc} -\begin{funcdesc}{load_source}{name\, pathname\, file} +\begin{funcdesc}{load_source}{name, pathname, file} Load and initialize a module implemented as a Python source file and return its module object. If the module was already initialized, it will be initialized \emph{again}. The \var{name} argument is used to diff --git a/Doc/lib/libmailcap.tex b/Doc/lib/libmailcap.tex index ecc8369..da337bb 100644 --- a/Doc/lib/libmailcap.tex +++ b/Doc/lib/libmailcap.tex @@ -17,7 +17,7 @@ Configuration Mechanism For Multimedia Mail Format Information,'' but is not an Internet standard. However, mailcap files are supported on most \UNIX{} systems. -\begin{funcdesc}{findmatch}{caps\, MIMEtype\, key\, filename\, plist} +\begin{funcdesc}{findmatch}{caps, MIMEtype, key, filename, plist} Return a 2-tuple; the first element is a string containing the command line to be executed (which can be passed to \code{os.system()}), and the second element is diff --git a/Doc/lib/libmimetools.tex b/Doc/lib/libmimetools.tex index 0ae3af5..0d4e40f 100644 --- a/Doc/lib/libmimetools.tex +++ b/Doc/lib/libmimetools.tex @@ -30,18 +30,18 @@ object \var{input} and write the decoded data to open file object \code{'base64'}, \code{'quoted-printable'} and \code{'uuencode'}. \end{funcdesc} -\begin{funcdesc}{encode}{input\, output\, encoding} +\begin{funcdesc}{encode}{input, output, encoding} Read data from open file object \var{input} and write it encoded using the allowed MIME \var{encoding} to open file object \var{output}. Valid values for \var{encoding} are the same as for \method{decode()}. \end{funcdesc} -\begin{funcdesc}{copyliteral}{input\, output} +\begin{funcdesc}{copyliteral}{input, output} Read lines until \EOF{} from open file \var{input} and write them to open file \var{output}. \end{funcdesc} -\begin{funcdesc}{copybinary}{input\, output} +\begin{funcdesc}{copybinary}{input, output} Read blocks until \EOF{} from open file \var{input} and write them to open file \var{output}. The block size is currently fixed at 8192. \end{funcdesc} diff --git a/Doc/lib/libminiae.tex b/Doc/lib/libminiae.tex index 00666fa..d898551 100644 --- a/Doc/lib/libminiae.tex +++ b/Doc/lib/libminiae.tex @@ -36,14 +36,14 @@ provide its own windows, etc. \setindexsubitem{(AEServer method)} -\begin{funcdesc}{installaehandler}{classe\, type\, callback} +\begin{funcdesc}{installaehandler}{classe, type, callback} Installs an AppleEvent handler. \code{Classe} and \code{type} are the four-char OSA Class and Type designators, \code{'****'} wildcards are allowed. When a matching AppleEvent is received the parameters are decoded and your callback is invoked. \end{funcdesc} -\begin{funcdesc}{callback}{_object\, **kwargs} +\begin{funcdesc}{callback}{_object, **kwargs} Your callback is called with the OSA Direct Object as first positional parameter. The other parameters are passed as keyword arguments, with the 4-char designator as name. Three extra keyword parameters are diff --git a/Doc/lib/libmpz.tex b/Doc/lib/libmpz.tex index 07b2170..1c4b19f 100644 --- a/Doc/lib/libmpz.tex +++ b/Doc/lib/libmpz.tex @@ -37,17 +37,17 @@ A number of \emph{extra} functions are defined in this module. Non mpz-arguments are converted to mpz-values first, and the functions return mpz-numbers. -\begin{funcdesc}{powm}{base\, exponent\, modulus} +\begin{funcdesc}{powm}{base, exponent, modulus} Return \code{pow(\var{base}, \var{exponent}) \%{} \var{modulus}}. If \code{\var{exponent} == 0}, return \code{mpz(1)}. In contrast to the \C-library function, this version can handle negative exponents. \end{funcdesc} -\begin{funcdesc}{gcd}{op1\, op2} +\begin{funcdesc}{gcd}{op1, op2} Return the greatest common divisor of \var{op1} and \var{op2}. \end{funcdesc} -\begin{funcdesc}{gcdext}{a\, b} +\begin{funcdesc}{gcdext}{a, b} Return a tuple \code{(\var{g}, \var{s}, \var{t})}, such that \code{\var{a}*\var{s} + \var{b}*\var{t} == \var{g} == gcd(\var{a}, \var{b})}. \end{funcdesc} @@ -61,7 +61,7 @@ return mpz-numbers. \code{\var{root}*\var{root} + \var{remainder} == \var{op}}. \end{funcdesc} -\begin{funcdesc}{divm}{numerator\, denominator\, modulus} +\begin{funcdesc}{divm}{numerator, denominator, modulus} Returns a number \var{q}. such that \code{\var{q} * \var{denominator} \%{} \var{modulus} == \var{numerator}}. One could also implement this function in Python, using \code{gcdext}. diff --git a/Doc/lib/libparser.tex b/Doc/lib/libparser.tex index cf45b45..ec1bae5 100644 --- a/Doc/lib/libparser.tex +++ b/Doc/lib/libparser.tex @@ -153,7 +153,7 @@ converted to parse trees represented as list- or tuple- trees, or may be compiled into executable code objects. Parse trees may be extracted with or without line numbering information. -\begin{funcdesc}{ast2list}{ast\optional{\, line_info\code{ = 0}}} +\begin{funcdesc}{ast2list}{ast\optional{, line_info\code{ = 0}}} This function accepts an AST object from the caller in \code{\var{ast}} and returns a Python list representing the equivelent parse tree. The resulting list representation can be used @@ -172,7 +172,7 @@ the line on which the token \emph{ends}. This information is omitted if the flag is false or omitted. \end{funcdesc} -\begin{funcdesc}{ast2tuple}{ast\optional{\, line_info\code{ = 0}}} +\begin{funcdesc}{ast2tuple}{ast\optional{, line_info\code{ = 0}}} This function accepts an AST object from the caller in \code{\var{ast}} and returns a Python tuple representing the equivelent parse tree. Other than returning a tuple instead of a @@ -184,7 +184,7 @@ representing the token. This information is omitted if the flag is false or omitted. \end{funcdesc} -\begin{funcdesc}{compileast}{ast\optional{\, filename\code{ = ''}}} +\begin{funcdesc}{compileast}{ast\optional{, filename\code{ = ''}}} The Python byte compiler can be invoked on an AST object to produce code objects which can be used as part of an \code{exec} statement or a call to the built-in \function{eval()}\bifuncindex{eval} function. diff --git a/Doc/lib/libpdb.tex b/Doc/lib/libpdb.tex index 5cfada5..4fe8ad1 100644 --- a/Doc/lib/libpdb.tex +++ b/Doc/lib/libpdb.tex @@ -69,7 +69,7 @@ NameError: spam The module defines the following functions; each enters the debugger in a slightly different way: -\begin{funcdesc}{run}{statement\optional{\, globals\optional{\, locals}}} +\begin{funcdesc}{run}{statement\optional{, globals\optional{, locals}}} Execute the \var{statement} (given as a string) under debugger control. The debugger prompt appears before any code is executed; you can set breakpoints and type \code{continue}, or you can step through @@ -81,14 +81,14 @@ the explanation of the \code{exec} statement or the \code{eval()} built-in function.) \end{funcdesc} -\begin{funcdesc}{runeval}{expression\optional{\, globals\optional{\, locals}}} +\begin{funcdesc}{runeval}{expression\optional{, globals\optional{, locals}}} Evaluate the \var{expression} (given as a a string) under debugger control. When \code{runeval()} returns, it returns the value of the expression. Otherwise this function is similar to \code{run()}. \end{funcdesc} -\begin{funcdesc}{runcall}{function\optional{\, argument\, ...}} +\begin{funcdesc}{runcall}{function\optional{, argument, ...}} Call the \var{function} (a function or method object, not a string) with the given arguments. When \code{runcall()} returns, it returns whatever the function call returned. The debugger prompt appears as diff --git a/Doc/lib/libpickle.tex b/Doc/lib/libpickle.tex index e2dab0a..d508e5b 100644 --- a/Doc/lib/libpickle.tex +++ b/Doc/lib/libpickle.tex @@ -229,7 +229,7 @@ Collection may also become a problem here.) Apart from the \code{Pickler} and \code{Unpickler} classes, the module defines the following functions, and an exception: -\begin{funcdesc}{dump}{object\, file\optional{, bin}} +\begin{funcdesc}{dump}{object, file\optional{, bin}} Write a pickled representation of \var{obect} to the open file object \var{file}. This is equivalent to \code{Pickler(\var{file}, \var{bin}).dump(\var{object})}. diff --git a/Doc/lib/libposix.tex b/Doc/lib/libposix.tex index 454c652..101938d 100644 --- a/Doc/lib/libposix.tex +++ b/Doc/lib/libposix.tex @@ -79,11 +79,11 @@ It defines the following functions and constants: Change the current working directory to \var{path}. \end{funcdesc} -\begin{funcdesc}{chmod}{path\, mode} +\begin{funcdesc}{chmod}{path, mode} Change the mode of \var{path} to the numeric \var{mode}. \end{funcdesc} -\begin{funcdesc}{chown}{path\, uid, gid} +\begin{funcdesc}{chown}{path, uid, gid} Change the owner and group id of \var{path} to the numeric \var{uid} and \var{gid}. (Not on MS-DOS.) @@ -103,19 +103,19 @@ built-in function \function{open()} or by \function{popen()} or Return a duplicate of file descriptor \var{fd}. \end{funcdesc} -\begin{funcdesc}{dup2}{fd\, fd2} +\begin{funcdesc}{dup2}{fd, fd2} Duplicate file descriptor \var{fd} to \var{fd2}, closing the latter first if necessary. \end{funcdesc} -\begin{funcdesc}{execv}{path\, args} +\begin{funcdesc}{execv}{path, args} Execute the executable \var{path} with argument list \var{args}, replacing the current process (i.e., the Python interpreter). The argument list may be a tuple or list of strings. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{execve}{path\, args\, env} +\begin{funcdesc}{execve}{path, args, env} Execute the executable \var{path} with argument list \var{args}, and environment \var{env}, replacing the current process (i.e., the Python interpreter). @@ -134,7 +134,7 @@ Note: the standard way to exit is \code{sys.exit(\var{n})}. after a \function{fork()}. \end{funcdesc} -\begin{funcdesc}{fdopen}{fd\optional{\, mode\optional{\, bufsize}}} +\begin{funcdesc}{fdopen}{fd\optional{, mode\optional{, bufsize}}} Return an open file object connected to the file descriptor \var{fd}. The \var{mode} and \var{bufsize} arguments have the same meaning as the corresponding arguments to the built-in \function{open()} function. @@ -150,7 +150,7 @@ process id in the parent. Return status for file descriptor \var{fd}, like \function{stat()}. \end{funcdesc} -\begin{funcdesc}{ftruncate}{fd\, length} +\begin{funcdesc}{ftruncate}{fd, length} Truncate the file corresponding to file descriptor \var{fd}, so that it is at most \var{length} bytes in size. \end{funcdesc} @@ -194,12 +194,12 @@ Return the current process' user id. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{kill}{pid\, sig} +\begin{funcdesc}{kill}{pid, sig} Kill the process \var{pid} with signal \var{sig}. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{link}{src\, dst} +\begin{funcdesc}{link}{src, dst} Create a hard link pointing to \var{src} named \var{dst}. (Not on MS-DOS.) \end{funcdesc} @@ -211,7 +211,7 @@ entries \code{'.'} and \code{'..'} even if they are present in the directory. \end{funcdesc} -\begin{funcdesc}{lseek}{fd\, pos\, how} +\begin{funcdesc}{lseek}{fd, pos, how} Set the current position of file descriptor \var{fd} to position \var{pos}, modified by \var{how}: \code{0} to set the position relative to the beginning of the file; \code{1} to set it relative to @@ -224,7 +224,7 @@ Like \function{stat()}, but do not follow symbolic links. (On systems without symbolic links, this is identical to \function{stat()}.) \end{funcdesc} -\begin{funcdesc}{mkfifo}{path\optional{\, mode}} +\begin{funcdesc}{mkfifo}{path\optional{, mode}} Create a FIFO (a \POSIX{} named pipe) named \var{path} with numeric mode \var{mode}. The default \var{mode} is \code{0666} (octal). The current umask value is first masked out from the mode. @@ -238,7 +238,7 @@ the client opens it for writing. Note that \function{mkfifo()} doesn't open the FIFO --- it just creates the rendezvous point. \end{funcdesc} -\begin{funcdesc}{mkdir}{path\optional{\, mode}} +\begin{funcdesc}{mkdir}{path\optional{, mode}} Create a directory named \var{path} with numeric mode \var{mode}. The default \var{mode} is \code{0777} (octal). On some systems, \var{mode} is ignored. Where it is used, the current umask value is @@ -250,7 +250,7 @@ Add \var{increment} to the process' ``niceness''. Return the new niceness. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{open}{file\, flags\optional{\, mode}} +\begin{funcdesc}{open}{file, flags\optional{, mode}} Open the file \var{file} and set various flags according to \var{flags} and possibly its mode according to \var{mode}. The default \var{mode} is \code{0777} (octal), and the current umask @@ -279,7 +279,7 @@ Lock program segments into memory. The value of \var{op} (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{popen}{command\optional{\, mode\optional{\, bufsize}}} +\begin{funcdesc}{popen}{command\optional{, mode\optional{, bufsize}}} Open a pipe to or from \var{command}. The return value is an open file object connected to the pipe, which can be read or written depending on whether \var{mode} is \code{'r'} (default) or \code{'w'}. @@ -291,7 +291,7 @@ object. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{putenv}{varname\, value} +\begin{funcdesc}{putenv}{varname, value} \index{environment variables!setting} Set the environment variable named \var{varname} to the string \var{value}. Such changes to the environment affect subprocesses @@ -309,7 +309,7 @@ actually preferable to assign to items of \code{os.environ}. Return the error message corresponding to the error code in \var{code}. \end{funcdesc} -\begin{funcdesc}{read}{fd\, n} +\begin{funcdesc}{read}{fd, n} Read at most \var{n} bytes from file descriptor \var{fd}. Return a string containing the bytes read. @@ -333,7 +333,7 @@ directory. This is identical to the \function{unlink()} function documented below. \end{funcdesc} -\begin{funcdesc}{rename}{src\, dst} +\begin{funcdesc}{rename}{src, dst} Rename the file or directory \var{src} to \var{dst}. \end{funcdesc} @@ -353,7 +353,7 @@ Calls the system call \cfunction{setpgrp()} or \cfunction{setpgrp(0, (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{setpgid}{pid\, pgrp} +\begin{funcdesc}{setpgid}{pid, pgrp} Calls the system call \cfunction{setpgid()}. See the \UNIX{} manual for the semantics. (Not on MS-DOS.) @@ -393,7 +393,7 @@ functions and constants that are useful for extracting information from a stat structure. \end{funcdesc} -\begin{funcdesc}{symlink}{src\, dst} +\begin{funcdesc}{symlink}{src, dst} Create a symbolic link pointing to \var{src} named \var{dst}. (On systems without symbolic links, this always raises \exception{error}.) \end{funcdesc} @@ -413,7 +413,7 @@ Return the process group associated with the terminal given by (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{tcsetpgrp}{fd\, pg} +\begin{funcdesc}{tcsetpgrp}{fd, pg} Set the process group associated with the terminal given by \var{fd} (an open file descriptor as returned by \function{open()}) to \var{pg}. @@ -453,7 +453,7 @@ Remove the file \var{path}. This is the same function as \code{remove}; the \code{unlink} name is its traditional \UNIX{} name. \end{funcdesc} -\begin{funcdesc}{utime}{path\, {\rm (}atime, mtime{\rm )}} +\begin{funcdesc}{utime}{path, {\rm (}atime, mtime{\rm )}} Set the access and modified time of the file to the given values. (The second argument is a tuple of two items.) \end{funcdesc} @@ -466,7 +466,7 @@ exit status (if the signal number is zero); the high bit of the low byte is set if a core file was produced. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{waitpid}{pid\, options} +\begin{funcdesc}{waitpid}{pid, options} Wait for completion of a child process given by proces id, and return a tuple containing its pid and exit status indication (encoded as for \function{wait()}). The semantics of the call are affected by the @@ -476,7 +476,7 @@ normal operation. (If the system does not support MS-DOS.) \end{funcdesc} -\begin{funcdesc}{write}{fd\, str} +\begin{funcdesc}{write}{fd, str} Write the string \var{str} to file descriptor \var{fd}. Return the number of bytes actually written. diff --git a/Doc/lib/libppath.tex b/Doc/lib/libppath.tex index f1d17d6..6639c7c 100644 --- a/Doc/lib/libppath.tex +++ b/Doc/lib/libppath.tex @@ -80,7 +80,7 @@ different device than \var{p}, or whether \file{\var{p}/..} and detect mount points for all \UNIX{} and \POSIX{} variants. \end{funcdesc} -\begin{funcdesc}{join}{p\optional{\, q\optional{\, ...}}} +\begin{funcdesc}{join}{p\optional{, q\optional{, ...}}} Joins one or more path components intelligently. If any component is an absolute path, all previous components are thrown away, and joining continues. The return value is the concatenation of \var{p}, and @@ -103,7 +103,7 @@ case (use \function{normcase()} for that). On Windows, it does converts forward slashes to backward slashes. \end{funcdesc} -\begin{funcdesc}{samefile}{p\, q} +\begin{funcdesc}{samefile}{p, q} Return true if both pathname arguments refer to the same file or directory (as indicated by device number and i-node number). Raise an exception if a \function{os.stat()} call on either pathname @@ -130,7 +130,7 @@ and \var{ext} is empty or begins with a period and contains at most one period. \end{funcdesc} -\begin{funcdesc}{walk}{p\, visit\, arg} +\begin{funcdesc}{walk}{p, visit, arg} Calls the function \var{visit} with arguments \code{(\var{arg}, \var{dirname}, \var{names})} for each directory in the directory tree rooted at \var{p} (including \var{p} itself, if it is a diff --git a/Doc/lib/libprofile.tex b/Doc/lib/libprofile.tex index a8b2099..3fa79df 100644 --- a/Doc/lib/libprofile.tex +++ b/Doc/lib/libprofile.tex @@ -269,7 +269,7 @@ Profiler Extensions, which includes discussion of how to derive ``better'' profilers from the classes presented, or reading the source code for these modules. -\begin{funcdesc}{profile.run}{string\optional{\, filename\optional{\, ...}}} +\begin{funcdesc}{profile.run}{string\optional{, filename\optional{, ...}}} This function takes a single argument that has can be passed to the \keyword{exec} statement, and an optional file name. In all cases this @@ -338,7 +338,7 @@ Analysis of the profiler data is done using this class from the \setindexsubitem{(in module pstats)} -\begin{classdesc}{Stats}{filename\optional{\, ...}} +\begin{classdesc}{Stats}{filename\optional{, ...}} This class constructor creates an instance of a ``statistics object'' from a \var{filename} (or set of filenames). \class{Stats} objects are manipulated by methods, in order to print useful reports. @@ -375,7 +375,7 @@ statistics for these two entries are accumulated into a single entry. \end{funcdesc} -\begin{funcdesc}{add}{filename\optional{\, ...}} +\begin{funcdesc}{add}{filename\optional{, ...}} This method of the \class{Stats} class accumulates additional profiling information into the current profiling object. Its arguments should refer to filenames created by the corresponding @@ -384,7 +384,7 @@ version of \function{profile.run()}. Statistics for identically named single function statistics. \end{funcdesc} -\begin{funcdesc}{sort_stats}{key\optional{\, ...}} +\begin{funcdesc}{sort_stats}{key\optional{, ...}} This method modifies the \class{Stats} object by sorting it according to the supplied criteria. The argument is typically a string identifying the basis of a sort (example: \code{"time"} or @@ -441,7 +441,7 @@ now that ascending vs descending order is properly selected based on the sort key of choice. \end{funcdesc} -\begin{funcdesc}{print_stats}{restriction\optional{\, ...}} +\begin{funcdesc}{print_stats}{restriction\optional{, ...}} This method for the \class{Stats} class prints out a report as described in the \function{profile.run()} definition. @@ -476,7 +476,7 @@ and then proceed to only print the first 10\% of them. \end{funcdesc} -\begin{funcdesc}{print_callers}{restrictions\optional{\, ...}} +\begin{funcdesc}{print_callers}{restrictions\optional{, ...}} This method for the \class{Stats} class prints a list of all functions that called each function in the profiled database. The ordering is identical to that provided by \method{print_stats()}, and the definition @@ -486,7 +486,7 @@ times this specific call was made. A second non-parenthesized number is the cumulative time spent in the function at the right. \end{funcdesc} -\begin{funcdesc}{print_callees}{restrictions\optional{\, ...}} +\begin{funcdesc}{print_callees}{restrictions\optional{, ...}} This method for the \class{Stats} class prints a list of all function that were called by the indicated function. Aside from this reversal of direction of calls (re: called vs was called by), the arguments and diff --git a/Doc/lib/libquopri.tex b/Doc/lib/libquopri.tex index 4ad0c0f..e379e4a 100644 --- a/Doc/lib/libquopri.tex +++ b/Doc/lib/libquopri.tex @@ -13,7 +13,7 @@ are many such characters, as when sending a graphics file. \setindexsubitem{(in module quopri)} -\begin{funcdesc}{decode}{input\, output} +\begin{funcdesc}{decode}{input, output} Decode the contents of the \var{input} file and write the resulting decoded binary data to the \var{output} file. \var{input} and \var{output} must either be file objects or objects that @@ -21,7 +21,7 @@ mimic the file object interface. \var{input} will be read until \code{\var{input}.read()} returns an empty string. \end{funcdesc} -\begin{funcdesc}{encode}{input\, output\, quotetabs} +\begin{funcdesc}{encode}{input, output, quotetabs} Encode the contents of the \var{input} file and write the resulting quoted-printable data to the \var{output} file. \var{input} and \var{output} must either be file objects or objects that diff --git a/Doc/lib/libregex.tex b/Doc/lib/libregex.tex index f427a88..e3de911 100644 --- a/Doc/lib/libregex.tex +++ b/Doc/lib/libregex.tex @@ -192,21 +192,21 @@ The module defines these functions, and an exception: \setindexsubitem{(in module regex)} -\begin{funcdesc}{match}{pattern\, string} +\begin{funcdesc}{match}{pattern, string} Return how many characters at the beginning of \var{string} match the regular expression \var{pattern}. Return \code{-1} if the string does not match the pattern (this is different from a zero-length match!). \end{funcdesc} -\begin{funcdesc}{search}{pattern\, string} +\begin{funcdesc}{search}{pattern, string} Return the first position in \var{string} that matches the regular expression \var{pattern}. Return \code{-1} if no position in the string matches the pattern (this is different from a zero-length match anywhere!). \end{funcdesc} -\begin{funcdesc}{compile}{pattern\optional{\, translate}} +\begin{funcdesc}{compile}{pattern\optional{, translate}} Compile a regular expression pattern into a regular expression object, which can be used for matching using its \code{match()} and \code{search()} methods, described below. The optional argument @@ -252,7 +252,7 @@ expressions.) Returns the current value of the syntax flags as an integer. \end{funcdesc} -\begin{funcdesc}{symcomp}{pattern\optional{\, translate}} +\begin{funcdesc}{symcomp}{pattern\optional{, translate}} This is like \code{compile()}, but supports symbolic group names: if a parenthesis-enclosed group begins with a group name in angular brackets, e.g. \code{'\e([a-z][a-z0-9]*\e)'}, the group can @@ -279,7 +279,7 @@ equivalents. Compiled regular expression objects support these methods: \setindexsubitem{(regex method)} -\begin{funcdesc}{match}{string\optional{\, pos}} +\begin{funcdesc}{match}{string\optional{, pos}} Return how many characters at the beginning of \var{string} match the compiled regular expression. Return \code{-1} if the string does not match the pattern (this is different from a zero-length @@ -293,7 +293,7 @@ Compiled regular expression objects support these methods: is to start. \end{funcdesc} -\begin{funcdesc}{search}{string\optional{\, pos}} +\begin{funcdesc}{search}{string\optional{, pos}} Return the first position in \var{string} that matches the regular expression \code{pattern}. Return \code{-1} if no position in the string matches the pattern (this is different from a zero-length @@ -303,7 +303,7 @@ Compiled regular expression objects support these methods: \code{match()} method. \end{funcdesc} -\begin{funcdesc}{group}{index\, index\, ...} +\begin{funcdesc}{group}{index, index, ...} This method is only valid when the last call to the \code{match()} or \code{search()} method found a match. It returns one or more groups of the match. If there is a single \var{index} argument, diff --git a/Doc/lib/libregsub.tex b/Doc/lib/libregsub.tex index 08b990e..b4d3862 100644 --- a/Doc/lib/libregsub.tex +++ b/Doc/lib/libregsub.tex @@ -20,7 +20,7 @@ conversion help, see the URL \setindexsubitem{(in module regsub)} -\begin{funcdesc}{sub}{pat\, repl\, str} +\begin{funcdesc}{sub}{pat, repl, str} Replace the first occurrence of pattern \var{pat} in string \var{str} by replacement \var{repl}. If the pattern isn't found, the string is returned unchanged. The pattern may be a string or an @@ -28,7 +28,7 @@ already compiled pattern. The replacement may contain references \samp{\e \var{digit}} to subpatterns and escaped backslashes. \end{funcdesc} -\begin{funcdesc}{gsub}{pat\, repl\, str} +\begin{funcdesc}{gsub}{pat, repl, str} Replace all (non-overlapping) occurrences of pattern \var{pat} in string \var{str} by replacement \var{repl}. The same rules as for \code{sub()} apply. Empty matches for the pattern are replaced only @@ -36,7 +36,7 @@ when not adjacent to a previous match, so e.g. \code{gsub('', '-', 'abc')} returns \code{'-a-b-c-'}. \end{funcdesc} -\begin{funcdesc}{split}{str\, pat\optional{\, maxsplit}} +\begin{funcdesc}{split}{str, pat\optional{, maxsplit}} Split the string \var{str} in fields separated by delimiters matching the pattern \var{pat}, and return a list containing the fields. Only non-empty matches for the pattern are considered, so e.g. @@ -47,7 +47,7 @@ occur, and the remainder of the string is returned as the final element of the list. \end{funcdesc} -\begin{funcdesc}{splitx}{str\, pat\optional{\, maxsplit}} +\begin{funcdesc}{splitx}{str, pat\optional{, maxsplit}} Split the string \var{str} in fields separated by delimiters matching the pattern \var{pat}, and return a list containing the fields as well as the separators. For example, \code{splitx('a:::b', ':*')} returns @@ -55,7 +55,7 @@ as the separators. For example, \code{splitx('a:::b', ':*')} returns as \code{split}. \end{funcdesc} -\begin{funcdesc}{capwords}{s\optional{\, pat}} +\begin{funcdesc}{capwords}{s\optional{, pat}} Capitalize words separated by optional pattern \var{pat}. The default pattern uses any characters except letters, digits and underscores as word delimiters. Capitalization is done by changing the first diff --git a/Doc/lib/librexec.tex b/Doc/lib/librexec.tex index 626edd3..e301f81 100644 --- a/Doc/lib/librexec.tex +++ b/Doc/lib/librexec.tex @@ -151,7 +151,7 @@ Import the module \var{modulename}, raising an \exception{ImportError} exception if the module is considered unsafe. \end{funcdesc} -\begin{funcdesc}{r_open}{filename\optional{\, mode\optional{\, bufsize}}} +\begin{funcdesc}{r_open}{filename\optional{, mode\optional{, bufsize}}} Method called when \function{open()} is called in the restricted environment. The arguments are identical to those of \function{open()}, and a file object (or a class instance compatible with file objects) @@ -172,7 +172,7 @@ restricted environment's \code{sys.modules} dictionary). And their equivalents with access to restricted standard I/O streams: -\begin{funcdesc}{s_import}{modulename\optional{\, globals, locals, fromlist}} +\begin{funcdesc}{s_import}{modulename\optional{, globals, locals, fromlist}} Import the module \var{modulename}, raising an \exception{ImportError} exception if the module is considered unsafe. \end{funcdesc} diff --git a/Doc/lib/librgbimg.tex b/Doc/lib/librgbimg.tex index 9432d2e..cb11554 100644 --- a/Doc/lib/librgbimg.tex +++ b/Doc/lib/librgbimg.tex @@ -29,7 +29,7 @@ the string. This format is suitable to pass to \code{gl.lrectwrite}, for instance. \end{funcdesc} -\begin{funcdesc}{longstoimage}{data\, x\, y\, z\, file} +\begin{funcdesc}{longstoimage}{data, x, y, z, file} This function writes the RGBA data in \var{data} to image file \var{file}. \var{x} and \var{y} give the size of the image. \var{z} is 1 if the saved image should be 1 byte greyscale, 3 if the diff --git a/Doc/lib/librotor.tex b/Doc/lib/librotor.tex index 488a49f..e467d4e 100644 --- a/Doc/lib/librotor.tex +++ b/Doc/lib/librotor.tex @@ -25,7 +25,7 @@ order. The available functions in this module are: \setindexsubitem{(in module rotor)} -\begin{funcdesc}{newrotor}{key\optional{\, numrotors}} +\begin{funcdesc}{newrotor}{key\optional{, numrotors}} Return a rotor object. \var{key} is a string containing the encryption key for the object; it can contain arbitrary binary data. The key will be used to randomly generate the rotor permutations and their initial positions. diff --git a/Doc/lib/libselect.tex b/Doc/lib/libselect.tex index 956bf7f..5a800f5 100644 --- a/Doc/lib/libselect.tex +++ b/Doc/lib/libselect.tex @@ -13,7 +13,7 @@ corresponding string, as would be printed by the C function \code{perror()}. \end{excdesc} -\begin{funcdesc}{select}{iwtd\, owtd\, ewtd\optional{\, timeout}} +\begin{funcdesc}{select}{iwtd, owtd, ewtd\optional{, timeout}} This is a straightforward interface to the \UNIX{} \code{select()} system call. The first three arguments are lists of `waitable objects': either integers representing \UNIX{} file descriptors or diff --git a/Doc/lib/libsgmllib.tex b/Doc/lib/libsgmllib.tex index 78060ec..f93095b 100644 --- a/Doc/lib/libsgmllib.tex +++ b/Doc/lib/libsgmllib.tex @@ -140,7 +140,7 @@ This method is called when an end tag is found which does not correspond to any open element. \end{funcdesc} -\begin{funcdesc}{unknown_starttag}{tag\, attributes} +\begin{funcdesc}{unknown_starttag}{tag, attributes} This method is called to process an unknown start tag. It is intended to be overridden by a derived class; the base class implementation does nothing. diff --git a/Doc/lib/libsignal.tex b/Doc/lib/libsignal.tex index 39286a7..fd74cf8 100644 --- a/Doc/lib/libsignal.tex +++ b/Doc/lib/libsignal.tex @@ -124,7 +124,7 @@ The \module{signal} module defines the following functions: \UNIX{} man page \manpage{signal}{2}.) \end{funcdesc} -\begin{funcdesc}{signal}{signalnum\, handler} +\begin{funcdesc}{signal}{signalnum, handler} Set the handler for signal \var{signalnum} to the function \var{handler}. \var{handler} can be any callable Python object, or one of the special values \constant{signal.SIG_IGN} or diff --git a/Doc/lib/libsocket.tex b/Doc/lib/libsocket.tex index 913bb8f..aff99d4 100644 --- a/Doc/lib/libsocket.tex +++ b/Doc/lib/libsocket.tex @@ -260,7 +260,7 @@ specifies the maximum number of queued connections and should be at least 1; the maximum value is system-dependent (usually 5). \end{funcdesc} -\begin{funcdesc}{makefile}{\optional{mode\optional{\, bufsize}}} +\begin{funcdesc}{makefile}{\optional{mode\optional{, bufsize}}} Return a \dfn{file object} associated with the socket. (File objects were described earlier in \ref{bltin-file-objects}, ``File Objects.'') The file object references a \cfunction{dup()}ped version of the @@ -293,7 +293,7 @@ socket. The optional \var{flags} argument has the same meaning as for \method{recv()} above. Returns the number of bytes sent. \end{funcdesc} -\begin{funcdesc}{sendto}{string\optional{\, flags}\, address} +\begin{funcdesc}{sendto}{string\optional{, flags}, address} Send data to the socket. The socket should not be connected to a remote socket, since the destination socket is specified by \var{address}. The optional \var{flags} argument has the same @@ -310,7 +310,7 @@ immediately dispose of the data, a \exception{error} exception is raised; in blocking mode, the calls block until they can proceed. \end{funcdesc} -\begin{funcdesc}{setsockopt}{level\, optname\, value} +\begin{funcdesc}{setsockopt}{level, optname, value} Set the value of the given socket option (see the \UNIX{} man page \manpage{setsockopt}{2}). The needed symbolic constants are defined in the \module{socket} module (\code{SO_*} etc.). The value can be an diff --git a/Doc/lib/libsocksvr.tex b/Doc/lib/libsocksvr.tex index ea1b703..2ee36a4 100644 --- a/Doc/lib/libsocksvr.tex +++ b/Doc/lib/libsocksvr.tex @@ -123,14 +123,14 @@ the \emph{new} socket object to be used to communicate with the client, and the client's address. \end{funcdesc} -\begin{funcdesc}{handle_error}{request\, client_address} +\begin{funcdesc}{handle_error}{request, client_address} This function is called if the \member{RequestHandlerClass}'s \method{handle()} method raises an exception. The default action is to print the traceback to standard output and continue handling further requests. \end{funcdesc} -\begin{funcdesc}{process_request}{request\, client_address} +\begin{funcdesc}{process_request}{request, client_address} Calls \method{finish_request()} to create an instance of the \member{RequestHandlerClass}. If desired, this function can create a new process or thread to handle the request; the \class{ForkingMixIn} @@ -151,7 +151,7 @@ Called by the server's constructor to bind the socket to the desired address. May be overridden. \end{funcdesc} -\begin{funcdesc}{verify_request}{request\, client_address} +\begin{funcdesc}{verify_request}{request, client_address} Must return a Boolean value; if the value is true, the request will be processed, and if it's false, the request will be denied. This function can be overridden to implement access controls for a server. diff --git a/Doc/lib/libstdwin.tex b/Doc/lib/libstdwin.tex index b16fde6..35ff6a7 100644 --- a/Doc/lib/libstdwin.tex +++ b/Doc/lib/libstdwin.tex @@ -80,16 +80,16 @@ matches any single character. On the Macintosh this function currently returns an empty list. \end{funcdesc} -\begin{funcdesc}{setdefscrollbars}{hflag\, vflag} +\begin{funcdesc}{setdefscrollbars}{hflag, vflag} Set the flags controlling whether subsequently opened windows will have horizontal and/or vertical scroll bars. \end{funcdesc} -\begin{funcdesc}{setdefwinpos}{h\, v} +\begin{funcdesc}{setdefwinpos}{h, v} Set the default window position for windows opened subsequently. \end{funcdesc} -\begin{funcdesc}{setdefwinsize}{width\, height} +\begin{funcdesc}{setdefwinsize}{width, height} Set the default window size for windows opened subsequently. \end{funcdesc} @@ -176,7 +176,7 @@ Note: normally, menus are created locally; see the window method returned by this call exists. \end{funcdesc} -\begin{funcdesc}{newbitmap}{width\, height} +\begin{funcdesc}{newbitmap}{width, height} Create a new bitmap object of the given dimensions. Methods of bitmap objects are described below. Not available on the Macintosh. @@ -192,7 +192,7 @@ Display a dialog box containing the string. The user must click OK before the function returns. \end{funcdesc} -\begin{funcdesc}{askync}{prompt\, default} +\begin{funcdesc}{askync}{prompt, default} Display a dialog that prompts the user to answer a question with yes or no. Return 0 for no, 1 for yes. @@ -203,7 +203,7 @@ If the user cancels the dialog, the exception is raised. \end{funcdesc} -\begin{funcdesc}{askstr}{prompt\, default} +\begin{funcdesc}{askstr}{prompt, default} Display a dialog that prompts the user for a string. If the user hits the Return key, the default string is returned. If the user cancels the dialog, the @@ -211,7 +211,7 @@ If the user cancels the dialog, the exception is raised. \end{funcdesc} -\begin{funcdesc}{askfile}{prompt\, default\, new} +\begin{funcdesc}{askfile}{prompt, default, new} Ask the user to specify a filename. If \var{new} @@ -221,7 +221,7 @@ If the user cancels the dialog, the exception is raised. \end{funcdesc} -\begin{funcdesc}{setcutbuffer}{i\, string} +\begin{funcdesc}{setcutbuffer}{i, string} Store the string in the system's cut buffer number \var{i}, where it can be found (for pasting) by other applications. @@ -278,7 +278,7 @@ characters). Return the total line height of the current font. \end{funcdesc} -\begin{funcdesc}{textbreak}{str\, width} +\begin{funcdesc}{textbreak}{str, width} Return the number of characters of the string that fit into a space of \var{width} bits wide when drawn in the curent font. @@ -365,7 +365,7 @@ Methods of menu objects are described below. returned by this call exists. \end{funcdesc} -\begin{funcdesc}{scroll}{rect\, point} +\begin{funcdesc}{scroll}{rect, point} Scroll the given rectangle by the vector given by the point. \end{funcdesc} @@ -378,7 +378,7 @@ Move the origin of the window (its upper left corner) to the given point in the document. \end{funcdesc} -\begin{funcdesc}{setselection}{i\, str} +\begin{funcdesc}{setselection}{i, str} Attempt to set X11 selection number \var{i} to the string @@ -428,12 +428,12 @@ On X11, there are many more (see \end{sloppypar} \end{funcdesc} -\begin{funcdesc}{setwinpos}{h\, v} +\begin{funcdesc}{setwinpos}{h, v} Set the the position of the window's upper left corner (relative to the upper left corner of the screen). \end{funcdesc} -\begin{funcdesc}{setwinsize}{width\, height} +\begin{funcdesc}{setwinsize}{width, height} Set the window's size. \end{funcdesc} @@ -474,11 +474,11 @@ Drawing objects have the following methods: Draw a box just inside a rectangle. \end{funcdesc} -\begin{funcdesc}{circle}{center\, radius} +\begin{funcdesc}{circle}{center, radius} Draw a circle with given center point and radius. \end{funcdesc} -\begin{funcdesc}{elarc}{center\, \(rh\, rv\)\, \(a1\, a2\)} +\begin{funcdesc}{elarc}{center, \(rh, rv\), \(a1, a2\)} Draw an elliptical arc with given center point. \code{(\var{rh}, \var{rv})} gives the half sizes of the horizontal and vertical radii. @@ -491,11 +491,11 @@ gives the angles (in degrees) of the begin and end points. Erase a rectangle. \end{funcdesc} -\begin{funcdesc}{fillcircle}{center\, radius} +\begin{funcdesc}{fillcircle}{center, radius} Draw a filled circle with given center point and radius. \end{funcdesc} -\begin{funcdesc}{fillelarc}{center\, \(rh\, rv\)\, \(a1\, a2\)} +\begin{funcdesc}{fillelarc}{center, \(rh, rv\), \(a1, a2\)} Draw a filled elliptical arc; arguments as for \code{elarc}. \end{funcdesc} @@ -507,7 +507,7 @@ Draw a filled polygon given by a list (or tuple) of points. Invert a rectangle. \end{funcdesc} -\begin{funcdesc}{line}{p1\, p2} +\begin{funcdesc}{line}{p1, p2} Draw a line from point \var{p1} to @@ -522,20 +522,20 @@ Fill a rectangle. Draw the lines connecting the given list (or tuple) of points. \end{funcdesc} -\begin{funcdesc}{shade}{rect\, percent} +\begin{funcdesc}{shade}{rect, percent} Fill a rectangle with a shading pattern that is about \var{percent} percent filled. \end{funcdesc} -\begin{funcdesc}{text}{p\, str} +\begin{funcdesc}{text}{p, str} Draw a string starting at point p (the point specifies the top left coordinate of the string). \end{funcdesc} -\begin{funcdesc}{xorcircle}{center\, radius} -\funcline{xorelarc}{center\, \(rh\, rv\)\, \(a1\, a2\)} -\funcline{xorline}{p1\, p2} +\begin{funcdesc}{xorcircle}{center, radius} +\funcline{xorelarc}{center, \(rh, rv\), \(a1, a2\)} +\funcline{xorline}{p1, p2} \funcline{xorpoly}{points} Draw a circle, an elliptical arc, a line or a polygon, respectively, in XOR mode. @@ -570,7 +570,7 @@ default font, which is in turn initialized from the global default font when the window is created. \end{funcdesc} -\begin{funcdesc}{bitmap}{point\, bitmap\, mask} +\begin{funcdesc}{bitmap}{point, bitmap, mask} Draw the \var{bitmap} with its top left corner at \var{point}. If the optional \var{mask} argument is present, it should be either the same object as \var{bitmap}, to draw only those bits that are set @@ -608,23 +608,23 @@ The following methods are defined: \setindexsubitem{(menu method)} -\begin{funcdesc}{additem}{text\, shortcut} +\begin{funcdesc}{additem}{text, shortcut} Add a menu item with given text. The shortcut must be a string of length 1, or omitted (to specify no shortcut). \end{funcdesc} -\begin{funcdesc}{setitem}{i\, text} +\begin{funcdesc}{setitem}{i, text} Set the text of item number \var{i}. \end{funcdesc} -\begin{funcdesc}{enable}{i\, flag} +\begin{funcdesc}{enable}{i, flag} Enable or disables item \var{i}. \end{funcdesc} -\begin{funcdesc}{check}{i\, flag} +\begin{funcdesc}{check}{i, flag} Set or clear the \dfn{check mark} for item @@ -652,7 +652,7 @@ Return a tuple representing the width and height of the bitmap. function.) \end{funcdesc} -\begin{funcdesc}{setbit}{point\, bit} +\begin{funcdesc}{setbit}{point, bit} Set the value of the bit indicated by \var{point} to \var{bit}. \end{funcdesc} @@ -691,7 +691,7 @@ Pass a draw event to the text-edit block. The rectangle specifies the redraw area. \end{funcdesc} -\begin{funcdesc}{event}{type\, window\, detail} +\begin{funcdesc}{event}{type, window, detail} Pass an event gotten from \code{stdwin.getevent()} to the text-edit block. @@ -727,7 +727,7 @@ Replace the text in the focus by the given string. The new focus is an insert point at the end of the string. \end{funcdesc} -\begin{funcdesc}{setfocus}{i\, j} +\begin{funcdesc}{setfocus}{i, j} Specify the new focus. Out-of-bounds values are silently clipped. \end{funcdesc} @@ -869,7 +869,7 @@ Returns if the list is empty or all its rectangles are empty. \end{funcdesc} -\begin{funcdesc}{pointinrect}{point\, rect} +\begin{funcdesc}{pointinrect}{point, rect} Returns true if the point is inside the rectangle. By definition, a point \code{(\var{h}, \var{v})} @@ -884,7 +884,7 @@ $\var{top} \leq \var{v} < \var{bottom}$. \fi \end{funcdesc} -\begin{funcdesc}{inset}{rect\, \(dh\, dv\)} +\begin{funcdesc}{inset}{rect, \(dh, dv\)} Returns a rectangle that lies inside the \code{rect} argument by diff --git a/Doc/lib/libstring.tex b/Doc/lib/libstring.tex index 7242c53..98e5a80 100644 --- a/Doc/lib/libstring.tex +++ b/Doc/lib/libstring.tex @@ -1,12 +1,11 @@ \section{Standard Module \sectcode{string}} \label{module-string} - \stmodindex{string} This module defines some constants useful for checking character classes and some useful string functions. See the module -\code{re} for string functions based on regular expressions. -\refstmodindex{re} +\module{re}\refstmodindex{re} for string functions based on regular +expressions. The constants defined in this module are are: @@ -20,16 +19,16 @@ The constants defined in this module are are: \end{datadesc} \begin{datadesc}{letters} - The concatenation of the strings \code{lowercase} and - \code{uppercase} described below. + The concatenation of the strings \function{lowercase()} and + \function{uppercase()} described below. \end{datadesc} \begin{datadesc}{lowercase} A string containing all the characters that are considered lowercase letters. On most systems this is the string \code{'abcdefghijklmnopqrstuvwxyz'}. Do not change its definition --- - the effect on the routines \code{upper} and \code{swapcase} is - undefined. + the effect on the routines \function{upper()} and + \function{swapcase()} is undefined. \end{datadesc} \begin{datadesc}{octdigits} @@ -40,16 +39,16 @@ The constants defined in this module are are: A string containing all the characters that are considered uppercase letters. On most systems this is the string \code{'ABCDEFGHIJKLMNOPQRSTUVWXYZ'}. Do not change its definition --- - the effect on the routines \code{lower} and \code{swapcase} is - undefined. + the effect on the routines \function{lower()} and + \function{swapcase()} is undefined. \end{datadesc} \begin{datadesc}{whitespace} A string containing all characters that are considered whitespace. On most systems this includes the characters space, tab, linefeed, return, formfeed, and vertical tab. Do not change its definition --- - the effect on the routines \code{strip} and \code{split} is - undefined. + the effect on the routines \function{strip()} and \function{split()} + is undefined. \end{datadesc} The functions defined in this module are: @@ -60,10 +59,11 @@ The functions defined in this module are: Convert a string to a floating point number. The string must have the standard syntax for a floating point literal in Python, optionally preceded by a sign (\samp{+} or \samp{-}). Note that this behaves -identical to the built-in function \code{float()} when passed a string. +identical to the built-in function +\function{float()}\bifuncindex{float} when passed a string. \end{funcdesc} -\begin{funcdesc}{atoi}{s\optional{\, base}} +\begin{funcdesc}{atoi}{s\optional{, base}} Convert string \var{s} to an integer in the given \var{base}. The string must consist of one or more digits, optionally preceded by a sign (\samp{+} or \samp{-}). The \var{base} defaults to 10. If it is @@ -72,20 +72,20 @@ string (after stripping the sign): \samp{0x} or \samp{0X} means 16, \samp{0} means 8, anything else means 10. If \var{base} is 16, a leading \samp{0x} or \samp{0X} is always accepted. Note that when invoked without \var{base} or with \var{base} set to 10, this behaves -identical to the built-in function \code{int()} when passed a string. +identical to the built-in function \function{int()} when passed a string. (Also note: for a more flexible interpretation of numeric literals, -use the built-in function \code{eval()}.) -\bifuncindex{eval} +use the built-in function \function{eval()}\bifuncindex{eval}.) \end{funcdesc} -\begin{funcdesc}{atol}{s\optional{\, base}} -Convert string \var{s} to a long integer in the given \var{base}. The +\begin{funcdesc}{atol}{s\optional{, base}} +Convert string \var{s} to a long integer in the given \var{base}. The string must consist of one or more digits, optionally preceded by a sign (\samp{+} or \samp{-}). The \var{base} argument has the same -meaning as for \code{atoi()}. A trailing \samp{l} or \samp{L} is not -allowed, except if the base is 0. Note that when invoked without +meaning as for \function{atoi()}. A trailing \samp{l} or \samp{L} is +not allowed, except if the base is 0. Note that when invoked without \var{base} or with \var{base} set to 10, this behaves identical to the -built-in function \code{long()} when passed a string. +built-in function \function{long()}\bifuncindex{long} when passed a +string. \end{funcdesc} \begin{funcdesc}{capitalize}{word} @@ -93,13 +93,14 @@ Capitalize the first character of the argument. \end{funcdesc} \begin{funcdesc}{capwords}{s} -Split the argument into words using \code{split}, capitalize each word -using \code{capitalize}, and join the capitalized words using -\code{join}. Note that this replaces runs of whitespace characters by -a single space, and removes leading and trailing whitespace. +Split the argument into words using \function{split()}, capitalize +each word using \function{capitalize()}, and join the capitalized +words using \function{join()}. Note that this replaces runs of +whitespace characters by a single space, and removes leading and +trailing whitespace. \end{funcdesc} -\begin{funcdesc}{expandtabs}{s\, tabsize} +\begin{funcdesc}{expandtabs}{s, tabsize} Expand tabs in a string, i.e.\ replace them by one or more spaces, depending on the current column and the given tab size. The column number is reset to zero after each newline occurring in the string. @@ -107,29 +108,29 @@ This doesn't understand other non-printing characters or escape sequences. \end{funcdesc} -\begin{funcdesc}{find}{s\, sub\optional{\, start\optional{\,end}}} +\begin{funcdesc}{find}{s, sub\optional{, start\optional{,end}}} Return the lowest index in \var{s} where the substring \var{sub} is found such that \var{sub} is wholly contained in -\code{\var{s}[\var{start}:\var{end}]}. Return -1 on failure. +\code{\var{s}[\var{start}:\var{end}]}. Return \code{-1} on failure. Defaults for \var{start} and \var{end} and interpretation of negative values is the same as for slices. \end{funcdesc} -\begin{funcdesc}{rfind}{s\, sub\optional{\, start\optional{\,end}}} -Like \code{find} but find the highest index. +\begin{funcdesc}{rfind}{s, sub\optional{, start\optional{, end}}} +Like \function{find()} but find the highest index. \end{funcdesc} -\begin{funcdesc}{index}{s\, sub\optional{\, start\optional{\,end}}} -Like \code{find} but raise \code{ValueError} when the substring is -not found. +\begin{funcdesc}{index}{s, sub\optional{, start\optional{, end}}} +Like \function{find()} but raise \exception{ValueError} when the +substring is not found. \end{funcdesc} -\begin{funcdesc}{rindex}{s\, sub\optional{\, start\optional{\,end}}} -Like \code{rfind} but raise \code{ValueError} when the substring is -not found. +\begin{funcdesc}{rindex}{s, sub\optional{, start\optional{, end}}} +Like \function{rfind()} but raise \exception{ValueError} when the +substring is not found. \end{funcdesc} -\begin{funcdesc}{count}{s\, sub\optional{\, start\optional{\,end}}} +\begin{funcdesc}{count}{s, sub\optional{, start\optional{, end}}} Return the number of (non-overlapping) occurrences of substring \var{sub} in string \code{\var{s}[\var{start}:\var{end}]}. Defaults for \var{start} and \var{end} and interpretation of negative @@ -141,13 +142,13 @@ Convert letters to lower case. \end{funcdesc} \begin{funcdesc}{maketrans}{from, to} -Return a translation table suitable for passing to \code{string.translate} -or \code{regex.compile}, that will map each character in \var{from} -into the character at the same position in \var{to}; \var{from} and -\var{to} must have the same length. +Return a translation table suitable for passing to +\function{translate()} or \function{regex.compile()}, that will map +each character in \var{from} into the character at the same position +in \var{to}; \var{from} and \var{to} must have the same length. \end{funcdesc} -\begin{funcdesc}{split}{s\optional{\, sep\optional{\, maxsplit}}} +\begin{funcdesc}{split}{s\optional{, sep\optional{, maxsplit}}} Return a list of the words of the string \var{s}. If the optional second argument \var{sep} is absent or \code{None}, the words are separated by arbitrary strings of whitespace characters (space, tab, @@ -161,24 +162,24 @@ remainder of the string is returned as the final element of the list (thus, the list will have at most \code{\var{maxsplit}+1} elements). \end{funcdesc} -\begin{funcdesc}{splitfields}{s\optional{\, sep\optional{\, maxsplit}}} -This function behaves identically to \code{split}. (In the past, -\code{split} was only used with one argument, while \code{splitfields} -was only used with two arguments.) +\begin{funcdesc}{splitfields}{s\optional{, sep\optional{, maxsplit}}} +This function behaves identically to \function{split()}. (In the +past, \function{split()} was only used with one argument, while +\function{splitfields()} was only used with two arguments.) \end{funcdesc} -\begin{funcdesc}{join}{words\optional{\, sep}} +\begin{funcdesc}{join}{words\optional{, sep}} Concatenate a list or tuple of words with intervening occurrences of -\var{sep}. The default value for \var{sep} is a single space character. -It is always true that -\code{string.join(string.split(\var{s}, \var{sep}), \var{sep})} +\var{sep}. The default value for \var{sep} is a single space +character. It is always true that +\samp{string.join(string.split(\var{s}, \var{sep}), \var{sep})} equals \var{s}. \end{funcdesc} -\begin{funcdesc}{joinfields}{words\optional{\, sep}} -This function behaves identical to \code{join}. (In the past, -\code{join} was only used with one argument, while \code{joinfields} -was only used with two arguments.) +\begin{funcdesc}{joinfields}{words\optional{, sep}} +This function behaves identical to \function{join()}. (In the past, +\function{join()} was only used with one argument, while +\function{joinfields()} was only used with two arguments.) \end{funcdesc} \begin{funcdesc}{lstrip}{s} @@ -198,19 +199,19 @@ Convert lower case letters to upper case and vice versa. \end{funcdesc} \begin{funcdesc}{translate}{s, table\optional{, deletechars}} -Delete all characters from \var{s} that are in \var{deletechars} (if present), and -then translate the characters using \var{table}, which must be -a 256-character string giving the translation for each character -value, indexed by its ordinal. +Delete all characters from \var{s} that are in \var{deletechars} (if +present), and then translate the characters using \var{table}, which +must be a 256-character string giving the translation for each +character value, indexed by its ordinal. \end{funcdesc} \begin{funcdesc}{upper}{s} Convert letters to upper case. \end{funcdesc} -\begin{funcdesc}{ljust}{s\, width} -\funcline{rjust}{s\, width} -\funcline{center}{s\, width} +\begin{funcdesc}{ljust}{s, width} +\funcline{rjust}{s, width} +\funcline{center}{s, width} These functions respectively left-justify, right-justify and center a string in a field of given width. They return a string that is at least @@ -221,7 +222,7 @@ with spaces until the given width on the right, left or both sides. The string is never truncated. \end{funcdesc} -\begin{funcdesc}{zfill}{s\, width} +\begin{funcdesc}{zfill}{s, width} Pad a numeric string on the left with zero digits until the given width is reached. Strings starting with a sign are handled correctly. \end{funcdesc} @@ -234,10 +235,10 @@ replaced. \end{funcdesc} This module is implemented in Python. Much of its functionality has -been reimplemented in the built-in module \code{strop}. However, you +been reimplemented in the built-in module +\module{strop}\refbimodindex{strop}. However, you should \emph{never} import the latter module directly. When -\code{string} discovers that \code{strop} exists, it transparently -replaces parts of itself with the implementation from \code{strop}. +\module{string} discovers that \module{strop} exists, it transparently +replaces parts of itself with the implementation from \module{strop}. After initialization, there is \emph{no} overhead in using -\code{string} instead of \code{strop}. -\refbimodindex{strop} +\module{string} instead of \module{strop}. diff --git a/Doc/lib/libstruct.tex b/Doc/lib/libstruct.tex index d0fde4f..b92076c 100644 --- a/Doc/lib/libstruct.tex +++ b/Doc/lib/libstruct.tex @@ -16,14 +16,14 @@ The module defines the following exception and functions: describing what is wrong. \end{excdesc} -\begin{funcdesc}{pack}{fmt\, v1\, v2\, {\rm \ldots}} +\begin{funcdesc}{pack}{fmt, v1, v2, {\rm \ldots}} Return a string containing the values \code{\var{v1}, \var{v2}, {\rm \ldots}} packed according to the given format. The arguments must match the values required by the format exactly. \end{funcdesc} -\begin{funcdesc}{unpack}{fmt\, string} +\begin{funcdesc}{unpack}{fmt, string} Unpack the string (presumably packed by \code{pack(\var{fmt}, {\rm \ldots})}) according to the given format. The result is a tuple even if it contains exactly one item. The string must contain exactly the diff --git a/Doc/lib/libsyslog.tex b/Doc/lib/libsyslog.tex index 8348e9c..5d2b6a9 100644 --- a/Doc/lib/libsyslog.tex +++ b/Doc/lib/libsyslog.tex @@ -10,7 +10,7 @@ The module defines the following functions: \setindexsubitem{(in module syslog)} -\begin{funcdesc}{syslog}{\optional{priority\,} message} +\begin{funcdesc}{syslog}{\optional{priority,} message} Send the string \var{message} to the system logger. A trailing newline is added if necessary. Each message is tagged with a priority composed of a \var{facility} and diff --git a/Doc/lib/libtemplate.tex b/Doc/lib/libtemplate.tex index db07934..3fb4f51 100644 --- a/Doc/lib/libtemplate.tex +++ b/Doc/lib/libtemplate.tex @@ -61,7 +61,7 @@ The \module{spam} module defines the following functions: % least once in the description; each usage (even inside \code{...}) % should be enclosed in \var{...}. -\begin{funcdesc}{open}{filename\optional{\, mode\, buffersize}} +\begin{funcdesc}{open}{filename\optional{, mode, buffersize}} Open the file \var{filename} as a can of Spam. The optional \var{mode} and \var{buffersize} arguments specify the read-write mode (\code{'r'} (default) or \code{'w'}) and the buffer size (default: diff --git a/Doc/lib/libthread.tex b/Doc/lib/libthread.tex index 24ebac5..dabfe70 100644 --- a/Doc/lib/libthread.tex +++ b/Doc/lib/libthread.tex @@ -25,7 +25,7 @@ It defines the following constant and functions: Raised on thread-specific errors. \end{excdesc} -\begin{funcdesc}{start_new_thread}{func\, arg} +\begin{funcdesc}{start_new_thread}{func, arg} Start a new thread. The thread executes the function \var{func} with the argument list \var{arg} (which must be a tuple). When the function returns, the thread silently exits. When the function diff --git a/Doc/lib/libtypes.tex b/Doc/lib/libtypes.tex index 5c87653..70f970e 100644 --- a/Doc/lib/libtypes.tex +++ b/Doc/lib/libtypes.tex @@ -534,9 +534,9 @@ dictionary entry. \indexii{dictionary}{type} Dictionaries are created by placing a comma-separated list of -\code{\var{key}:\,\var{value}} pairs within braces, for example: -\code{\{'jack':\,4098, 'sjoerd':\,4127\}} or -\code{\{4098:\,'jack', 4127:\,'sjoerd'\}}. +\code{\var{key}: \var{value}} pairs within braces, for example: +\code{\{'jack': 4098, 'sjoerd': 4127\}} or +\code{\{4098: 'jack', 4127: 'sjoerd'\}}. The following operations are defined on mappings (where \var{a} is a mapping, \var{k} is a key and \var{x} is an arbitrary object): @@ -767,7 +767,7 @@ descriptors, e.g. module \code{fcntl} or \code{os.read()} and friends. internal buffer size) are read. \end{funcdesc} -\begin{funcdesc}{seek}{offset\, whence} +\begin{funcdesc}{seek}{offset, whence} Set the file's current position, like \code{stdio}'s \code{fseek()}. The \var{whence} argument is optional and defaults to \code{0} (absolute file positioning); other values are \code{1} (seek diff --git a/Doc/lib/liburllib.tex b/Doc/lib/liburllib.tex index 01fc875..1732d85 100644 --- a/Doc/lib/liburllib.tex +++ b/Doc/lib/liburllib.tex @@ -55,7 +55,7 @@ Clear the cache that may have been built up by previous calls to \function{urlretrieve()}. \end{funcdesc} -\begin{funcdesc}{quote}{string\optional{\, addsafe}} +\begin{funcdesc}{quote}{string\optional{, addsafe}} Replace special characters in \var{string} using the \samp{\%xx} escape. Letters, digits, and the characters \character{_,.-} are never quoted. The optional \var{addsafe} parameter specifies additional characters @@ -64,7 +64,7 @@ that should not be quoted --- its default value is \code{'/'}. Example: \code{quote('/\~connolly/')} yields \code{'/\%7econnolly/'}. \end{funcdesc} -\begin{funcdesc}{quote_plus}{string\optional{\, addsafe}} +\begin{funcdesc}{quote_plus}{string\optional{, addsafe}} Like \function{quote()}, but also replaces spaces by plus signs, as required for quoting HTML form values. \end{funcdesc} diff --git a/Doc/lib/liburlparse.tex b/Doc/lib/liburlparse.tex index 32d88ee..3017a16 100644 --- a/Doc/lib/liburlparse.tex +++ b/Doc/lib/liburlparse.tex @@ -61,7 +61,7 @@ URL that was parsed originally had redundant delimiters, e.g. a ? with an empty query (the draft states that these are equivalent). \end{funcdesc} -\begin{funcdesc}{urljoin}{base\, url\optional{\, allow_fragments}} +\begin{funcdesc}{urljoin}{base, url\optional{, allow_fragments}} Construct a full (``absolute'') URL by combining a ``base URL'' (\var{base}) with a ``relative URL'' (\var{url}). Informally, this uses components of the base URL, in particular the addressing scheme, diff --git a/Doc/lib/libuu.tex b/Doc/lib/libuu.tex index 87182dc..e953628 100644 --- a/Doc/lib/libuu.tex +++ b/Doc/lib/libuu.tex @@ -19,7 +19,7 @@ The \module{uu} module defines the following functions: \setindexsubitem{(in module uu)} -\begin{funcdesc}{encode}{in_file\, out_file\optional{\, name\, mode}} +\begin{funcdesc}{encode}{in_file, out_file\optional{, name, mode}} Uuencode file \var{in_file} into file \var{out_file}. The uuencoded file will have the header specifying \var{name} and \var{mode} as the defaults for the results of decoding the file. The default defaults @@ -27,7 +27,7 @@ are taken from \var{in_file}, or \code{'-'} and \code{0666} respectively. \end{funcdesc} -\begin{funcdesc}{decode}{in_file\optional{\, out_file\, mode}} +\begin{funcdesc}{decode}{in_file\optional{, out_file, mode}} This call decodes uuencoded file \var{in_file} placing the result on file \var{out_file}. If \var{out_file} is a pathname the \var{mode} is also set. Defaults for \var{out_file} and \var{mode} are taken from diff --git a/Doc/lib/libwhrandom.tex b/Doc/lib/libwhrandom.tex index cac7de7..7803184 100644 --- a/Doc/lib/libwhrandom.tex +++ b/Doc/lib/libwhrandom.tex @@ -11,7 +11,7 @@ class that is also named \code{whrandom}. Instances of the Chooses a random element from the non-empty sequence \var{seq} and returns it. \end{funcdesc} -\begin{funcdesc}{randint}{a\, b} +\begin{funcdesc}{randint}{a, b} Returns a random integer \var{N} such that \code{\var{a}<=\var{N}<=\var{b}}. \end{funcdesc} @@ -19,7 +19,7 @@ Returns a random integer \var{N} such that \code{\var{a}<=\var{N}<=\var{b}}. Returns the next random floating point number in the range [0.0 ... 1.0). \end{funcdesc} -\begin{funcdesc}{seed}{x\, y\, z} +\begin{funcdesc}{seed}{x, y, z} Initializes the random number generator from the integers \var{x}, \var{y} @@ -29,7 +29,7 @@ When the module is first imported, the random number is initialized using values derived from the current time. \end{funcdesc} -\begin{funcdesc}{uniform}{a\, b} +\begin{funcdesc}{uniform}{a, b} Returns a random real number \var{N} such that \code{\var{a}<=\var{N}<\var{b}}. \end{funcdesc} diff --git a/Doc/lib/libxdrlib.tex b/Doc/lib/libxdrlib.tex index 221a578..62e9df7 100644 --- a/Doc/lib/libxdrlib.tex +++ b/Doc/lib/libxdrlib.tex @@ -96,7 +96,7 @@ the individual item. At the end of the list, an unsigned integer \code{0} is packed. \end{funcdesc} -\begin{funcdesc}{pack_farray}{n\, array\, pack_item} +\begin{funcdesc}{pack_farray}{n, array, pack_item} Packs a fixed length list (\var{array}) of homogeneous items. \var{n} is the length of the list; it is \emph{not} packed into the buffer, but a \exception{ValueError} exception is raised if @@ -104,7 +104,7 @@ but a \exception{ValueError} exception is raised if \var{pack_item} is the function used to pack each element. \end{funcdesc} -\begin{funcdesc}{pack_array}{list\, pack_item} +\begin{funcdesc}{pack_array}{list, pack_item} Packs a variable length \var{list} of homogeneous items. First, the length of the list is packed as an unsigned integer, then each element is packed as in \method{pack_farray()} above. @@ -192,7 +192,7 @@ then the item is unpacked and appended to the list. A flag of function that is called to unpack the items. \end{funcdesc} -\begin{funcdesc}{unpack_farray}{n\, unpack_item} +\begin{funcdesc}{unpack_farray}{n, unpack_item} Unpacks and returns (as a list) a fixed length array of homogeneous items. \var{n} is number of list elements to expect in the buffer. As above, \var{unpack_item} is the function used to unpack each element. diff --git a/Doc/lib/libxmllib.tex b/Doc/lib/libxmllib.tex index ba9e006..efc7f00 100644 --- a/Doc/lib/libxmllib.tex +++ b/Doc/lib/libxmllib.tex @@ -78,7 +78,7 @@ The base implementation simply calls \var{method} with \var{attributes} as the only argument. \end{funcdesc} -\begin{funcdesc}{handle_endtag}{tag\, method} +\begin{funcdesc}{handle_endtag}{tag, method} This method is called to handle endtags for which an \code{end_\var{tag}()} method has been defined. The \var{tag} argument is the name of the tag, and the @@ -170,7 +170,7 @@ raise a \exception{RuntimeError} without first calling \method{syntax_error()}. \end{funcdesc} -\begin{funcdesc}{unknown_starttag}{tag\, attributes} +\begin{funcdesc}{unknown_starttag}{tag, attributes} This method is called to process an unknown start tag. It is intended to be overridden by a derived class; the base class implementation does nothing. diff --git a/Doc/lib/libzlib.tex b/Doc/lib/libzlib.tex index 9234c5f..c4ad987 100644 --- a/Doc/lib/libzlib.tex +++ b/Doc/lib/libzlib.tex @@ -14,7 +14,7 @@ later version if one is available. The available functions in this module are: \setindexsubitem{(in module zlib)} -\begin{funcdesc}{adler32}{string\optional{\, value}} +\begin{funcdesc}{adler32}{string\optional{, value}} Computes a Adler-32 checksum of \var{string}. (An Adler-32 checksum is almost as reliable as a CRC32 but can be computed much more quickly.) If \var{value} is present, it is used as the @@ -25,7 +25,7 @@ The available functions in this module are: authentication or digital signatures. \end{funcdesc} -\begin{funcdesc}{compress}{string\optional{\, level}} +\begin{funcdesc}{compress}{string\optional{, level}} Compresses the data in \var{string}, returning a string contained compressed data. \var{level} is an integer from \code{1} to \code{9} controlling the level of compression; \code{1} is fastest and produces @@ -42,7 +42,7 @@ exception if any error occurs. produces the most. The default value is \code{6}. \end{funcdesc} -\begin{funcdesc}{crc32}{string\optional{\, value}} +\begin{funcdesc}{crc32}{string\optional{, value}} Computes a CRC (Cyclic Redundancy Check) sum of \var{string}. If \var{value} is present, it is used as the starting value of the checksum; otherwise, a fixed default value is used. This allows diff --git a/Doc/libaifc.tex b/Doc/libaifc.tex index 34df720..8bb88a1 100644 --- a/Doc/libaifc.tex +++ b/Doc/libaifc.tex @@ -24,7 +24,7 @@ second's worth occupies 2*2*44100 bytes, i.e.\ 176,400 bytes. Module \code{aifc} defines the following function: \setindexsubitem{(in module aifc)} -\begin{funcdesc}{open}{file\, mode} +\begin{funcdesc}{open}{file, mode} Open an AIFF or AIFF-C file and return an object instance with methods that are described below. The argument file is either a string naming a file or a file object. The mode is either the string @@ -146,7 +146,7 @@ If this parameter is not set, or not set correctly, the file needs to support seeking. \end{funcdesc} -\begin{funcdesc}{setcomptype}{type\, name} +\begin{funcdesc}{setcomptype}{type, name} Specify the compression type. If not specified, the audio data will not be compressed. In AIFF files, compression is not possible. The name parameter should be a human-readable description of the @@ -155,14 +155,14 @@ string. Currently the following compression types are supported: NONE, ULAW, ALAW, G722. \end{funcdesc} -\begin{funcdesc}{setparams}{nchannels\, sampwidth\, framerate\, comptype\, compname} +\begin{funcdesc}{setparams}{nchannels, sampwidth, framerate, comptype, compname} Set all the above parameters at once. The argument is a tuple consisting of the various parameters. This means that it is possible to use the result of a \code{getparams()} call as argument to \code{setparams()}. \end{funcdesc} -\begin{funcdesc}{setmark}{id\, pos\, name} +\begin{funcdesc}{setmark}{id, pos, name} Add a mark with the given id (larger than 0), and the given name at the given position. This method can be called at any time before \code{close()}. diff --git a/Doc/libal.tex b/Doc/libal.tex index 63bdf1b..1126f83 100644 --- a/Doc/libal.tex +++ b/Doc/libal.tex @@ -27,7 +27,7 @@ The module defines the following functions: \setindexsubitem{(in module al)} -\begin{funcdesc}{openport}{name\, direction\optional{\, config}} +\begin{funcdesc}{openport}{name, direction\optional{, config}} The name and direction arguments are strings. The optional config argument is a configuration object as returned by \code{al.newconfig()}. The return value is an \dfn{port object}; @@ -44,12 +44,12 @@ The device argument is an integer. The return value is a list of integers containing the data returned by ALqueryparams(). \end{funcdesc} -\begin{funcdesc}{getparams}{device\, list} +\begin{funcdesc}{getparams}{device, list} The device argument is an integer. The list argument is a list such as returned by \code{queryparams}; it is modified in place (!). \end{funcdesc} -\begin{funcdesc}{setparams}{device\, list} +\begin{funcdesc}{setparams}{device, list} The device argument is an integer. The list argument is a list such as returned by \code{al.queryparams}. \end{funcdesc} diff --git a/Doc/libamoeba.tex b/Doc/libamoeba.tex index d471f35..3e64257 100644 --- a/Doc/libamoeba.tex +++ b/Doc/libamoeba.tex @@ -12,7 +12,7 @@ the exception \code{amoeba.error = 'amoeba.error'}. The module \code{amoeba} defines the following items: \setindexsubitem{(in module amoeba)} -\begin{funcdesc}{name_append}{path\, cap} +\begin{funcdesc}{name_append}{path, cap} Stores a capability in the Amoeba directory tree. Arguments are the pathname (a string) and the capability (a capability object as returned by @@ -32,7 +32,7 @@ Returns a object, to which various interesting operations apply, described below. \end{funcdesc} -\begin{funcdesc}{name_replace}{path\, cap} +\begin{funcdesc}{name_replace}{path, cap} Replaces a capability in the Amoeba directory tree. Arguments are the pathname and the new capability. (This differs from @@ -91,7 +91,7 @@ The following methods are defined for capability objects. Returns a list of the names of the entries in an Amoeba directory. \end{funcdesc} -\begin{funcdesc}{b_read}{offset\, maxsize} +\begin{funcdesc}{b_read}{offset, maxsize} Reads (at most) \var{maxsize} bytes from a bullet file at offset diff --git a/Doc/libanydbm.tex b/Doc/libanydbm.tex index c7e5ae3..1c46c61 100644 --- a/Doc/libanydbm.tex +++ b/Doc/libanydbm.tex @@ -13,7 +13,7 @@ will be used. Both modules provide the same interface: % at the same time. \setindexsubitem{(in modules anydbm, dumbdbm)} -\begin{funcdesc}{open}{filename\optional{\, flag\, mode}} +\begin{funcdesc}{open}{filename\optional{, flag, mode}} Open the database file \var{filename} and return a corresponding object. The optional \var{flag} argument can be \code{'r'} to open an existing database for reading only, diff --git a/Doc/libarray.tex b/Doc/libarray.tex index 0380bd6..03b4933 100644 --- a/Doc/libarray.tex +++ b/Doc/libarray.tex @@ -35,7 +35,7 @@ See also built-in module \module{struct}\refbimodindex{struct}. The module defines the following function: -\begin{funcdesc}{array}{typecode\optional{\, initializer}} +\begin{funcdesc}{array}{typecode\optional{, initializer}} Return a new array whose items are restricted by \var{typecode}, and initialized from the optional \var{initializer} value, which must be a list or a string. The list or string is passed to the new array's @@ -77,7 +77,7 @@ integer values. It is useful when reading data from a file written on a machine with a different byte order. \end{funcdesc} -\begin{funcdesc}{fromfile}{f\, n} +\begin{funcdesc}{fromfile}{f, n} Read \var{n} items (as machine values) from the file object \var{f} and append them to the end of the array. If less than \var{n} items are available, \exception{EOFError} is raised, but the items that were @@ -98,12 +98,12 @@ array of machine values (i.e. as if it had been read from a file using the \method{fromfile()} method). \end{funcdesc} -\begin{funcdesc}{insert}{i\, x} +\begin{funcdesc}{insert}{i, x} Insert a new item with value \var{x} in the array before position \var{i}. \end{funcdesc} -\begin{funcdesc}{read}{f\, n} +\begin{funcdesc}{read}{f, n} \deprecated {1.5.1} {Use the \method{fromfile()} method.} Read \var{n} items (as machine values) from the file object \var{f} diff --git a/Doc/libaudioop.tex b/Doc/libaudioop.tex index 69a3a83..887cac9 100644 --- a/Doc/libaudioop.tex +++ b/Doc/libaudioop.tex @@ -19,46 +19,46 @@ This exception is raised on all errors, such as unknown number of bytes per sample, etc. \end{excdesc} -\begin{funcdesc}{add}{fragment1\, fragment2\, width} +\begin{funcdesc}{add}{fragment1, fragment2, width} Return a fragment which is the addition of the two samples passed as parameters. \var{width} is the sample width in bytes, either \code{1}, \code{2} or \code{4}. Both fragments should have the same length. \end{funcdesc} -\begin{funcdesc}{adpcm2lin}{adpcmfragment\, width\, state} +\begin{funcdesc}{adpcm2lin}{adpcmfragment, width, state} Decode an Intel/DVI ADPCM coded fragment to a linear fragment. See the description of \code{lin2adpcm} for details on ADPCM coding. Return a tuple \code{(\var{sample}, \var{newstate})} where the sample has the width specified in \var{width}. \end{funcdesc} -\begin{funcdesc}{adpcm32lin}{adpcmfragment\, width\, state} +\begin{funcdesc}{adpcm32lin}{adpcmfragment, width, state} Decode an alternative 3-bit ADPCM code. See \code{lin2adpcm3} for details. \end{funcdesc} -\begin{funcdesc}{avg}{fragment\, width} +\begin{funcdesc}{avg}{fragment, width} Return the average over all samples in the fragment. \end{funcdesc} -\begin{funcdesc}{avgpp}{fragment\, width} +\begin{funcdesc}{avgpp}{fragment, width} Return the average peak-peak value over all samples in the fragment. No filtering is done, so the usefulness of this routine is questionable. \end{funcdesc} -\begin{funcdesc}{bias}{fragment\, width\, bias} +\begin{funcdesc}{bias}{fragment, width, bias} Return a fragment that is the original fragment with a bias added to each sample. \end{funcdesc} -\begin{funcdesc}{cross}{fragment\, width} +\begin{funcdesc}{cross}{fragment, width} Return the number of zero crossings in the fragment passed as an argument. \end{funcdesc} -\begin{funcdesc}{findfactor}{fragment\, reference} +\begin{funcdesc}{findfactor}{fragment, reference} Return a factor \var{F} such that \code{rms(add(fragment, mul(reference, -F)))} is minimal, i.e., return the factor with which you should multiply \var{reference} to @@ -68,7 +68,7 @@ should both contain 2-byte samples. The time taken by this routine is proportional to \code{len(fragment)}. \end{funcdesc} -\begin{funcdesc}{findfit}{fragment\, reference} +\begin{funcdesc}{findfit}{fragment, reference} This routine (which only accepts 2-byte sample fragments) Try to match \var{reference} as well as possible to a portion of @@ -82,7 +82,7 @@ and \var{factor} is the (floating-point) factor as per \code{findfactor}. \end{funcdesc} -\begin{funcdesc}{findmax}{fragment\, length} +\begin{funcdesc}{findmax}{fragment, length} Search \var{fragment} for a slice of length \var{length} samples (not bytes!)\ with maximum energy, i.e., return \var{i} for which \code{rms(fragment[i*2:(i+length)*2])} is maximal. The fragments @@ -91,15 +91,15 @@ should both contain 2-byte samples. The routine takes time proportional to \code{len(fragment)}. \end{funcdesc} -\begin{funcdesc}{getsample}{fragment\, width\, index} +\begin{funcdesc}{getsample}{fragment, width, index} Return the value of sample \var{index} from the fragment. \end{funcdesc} -\begin{funcdesc}{lin2lin}{fragment\, width\, newwidth} +\begin{funcdesc}{lin2lin}{fragment, width, newwidth} Convert samples between 1-, 2- and 4-byte formats. \end{funcdesc} -\begin{funcdesc}{lin2adpcm}{fragment\, width\, state} +\begin{funcdesc}{lin2adpcm}{fragment, width, state} Convert samples to 4 bit Intel/DVI ADPCM encoding. ADPCM coding is an adaptive coding scheme, whereby each 4 bit number is the difference between one sample and the next, divided by a (varying) step. The @@ -113,41 +113,41 @@ initial call \code{None} can be passed as the state. \var{adpcmfrag} is the ADPCM coded fragment packed 2 4-bit values per byte. \end{funcdesc} -\begin{funcdesc}{lin2adpcm3}{fragment\, width\, state} +\begin{funcdesc}{lin2adpcm3}{fragment, width, state} This is an alternative ADPCM coder that uses only 3 bits per sample. It is not compatible with the Intel/DVI ADPCM coder and its output is not packed (due to laziness on the side of the author). Its use is discouraged. \end{funcdesc} -\begin{funcdesc}{lin2ulaw}{fragment\, width} +\begin{funcdesc}{lin2ulaw}{fragment, width} Convert samples in the audio fragment to U-LAW encoding and return this as a Python string. U-LAW is an audio encoding format whereby you get a dynamic range of about 14 bits using only 8 bit samples. It is used by the Sun audio hardware, among others. \end{funcdesc} -\begin{funcdesc}{minmax}{fragment\, width} +\begin{funcdesc}{minmax}{fragment, width} Return a tuple consisting of the minimum and maximum values of all samples in the sound fragment. \end{funcdesc} -\begin{funcdesc}{max}{fragment\, width} +\begin{funcdesc}{max}{fragment, width} Return the maximum of the \emph{absolute value} of all samples in a fragment. \end{funcdesc} -\begin{funcdesc}{maxpp}{fragment\, width} +\begin{funcdesc}{maxpp}{fragment, width} Return the maximum peak-peak value in the sound fragment. \end{funcdesc} -\begin{funcdesc}{mul}{fragment\, width\, factor} +\begin{funcdesc}{mul}{fragment, width, factor} Return a fragment that has all samples in the original framgent multiplied by the floating-point value \var{factor}. Overflow is silently ignored. \end{funcdesc} -\begin{funcdesc}{ratecv}{fragment\, width\, nchannels\, inrate\, outrate\, state\optional{\, weightA\, weightB}} +\begin{funcdesc}{ratecv}{fragment, width, nchannels, inrate, outrate, state\optional{, weightA, weightB}} Convert the frame rate of the input fragment. \code{State} is a tuple containing the state of the converter. The @@ -158,11 +158,11 @@ The \code{weightA} and \code{weightB} arguments are parameters for a simple digital filter and default to 1 and 0 respectively. \end{funcdesc} -\begin{funcdesc}{reverse}{fragment\, width} +\begin{funcdesc}{reverse}{fragment, width} Reverse the samples in a fragment and returns the modified fragment. \end{funcdesc} -\begin{funcdesc}{rms}{fragment\, width} +\begin{funcdesc}{rms}{fragment, width} Return the root-mean-square of the fragment, i.e. \iftexi the square root of the quotient of the sum of all squared sample value, @@ -177,20 +177,20 @@ divided by the sumber of samples. This is a measure of the power in an audio signal. \end{funcdesc} -\begin{funcdesc}{tomono}{fragment\, width\, lfactor\, rfactor} +\begin{funcdesc}{tomono}{fragment, width, lfactor, rfactor} Convert a stereo fragment to a mono fragment. The left channel is multiplied by \var{lfactor} and the right channel by \var{rfactor} before adding the two channels to give a mono signal. \end{funcdesc} -\begin{funcdesc}{tostereo}{fragment\, width\, lfactor\, rfactor} +\begin{funcdesc}{tostereo}{fragment, width, lfactor, rfactor} Generate a stereo fragment from a mono fragment. Each pair of samples in the stereo fragment are computed from the mono sample, whereby left channel samples are multiplied by \var{lfactor} and right channel samples by \var{rfactor}. \end{funcdesc} -\begin{funcdesc}{ulaw2lin}{fragment\, width} +\begin{funcdesc}{ulaw2lin}{fragment, width} Convert sound fragments in ULAW encoding to linearly encoded sound fragments. ULAW encoding always uses 8 bits samples, so \var{width} refers only to the sample width of the output fragment here. diff --git a/Doc/libbasehttp.tex b/Doc/libbasehttp.tex index 12d9483..2a4a7d0 100644 --- a/Doc/libbasehttp.tex +++ b/Doc/libbasehttp.tex @@ -157,7 +157,7 @@ followed by text composed using the \member{error_message_format} class variable. \end{funcdesc} -\begin{funcdesc}{send_response}{code\optional{\, message}} +\begin{funcdesc}{send_response}{code\optional{, message}} Sends a response header and logs the accepted request. The HTTP response line is sent, followed by \emph{Server} and \emph{Date} headers. The values for these two headers are picked up from the @@ -165,7 +165,7 @@ headers. The values for these two headers are picked up from the respectively. \end{funcdesc} -\begin{funcdesc}{send_header}{keyword\, value} +\begin{funcdesc}{send_header}{keyword, value} Writes a specific MIME header to the output stream. \var{keyword} should specify the header keyword, with \var{value} specifying its value. @@ -176,7 +176,7 @@ Sends a blank line, indicating the end of the MIME headers in the response. \end{funcdesc} -\begin{funcdesc}{log_request}{\optional{code\optional{\, size}}} +\begin{funcdesc}{log_request}{\optional{code\optional{, size}}} Logs an accepted (successful) request. \var{code} should specify the numeric HTTP code associated with the response. If a size of the response is available, then it should be passed as the diff --git a/Doc/libbastion.tex b/Doc/libbastion.tex index 7b7cba6..c405c64 100644 --- a/Doc/libbastion.tex +++ b/Doc/libbastion.tex @@ -17,7 +17,7 @@ other, unsafe attributes. % I've punted on the issue of documenting keyword arguments for now. -\begin{funcdesc}{Bastion}{object\optional{\, filter\, name\, class}} +\begin{funcdesc}{Bastion}{object\optional{, filter, name, class}} Protect the object \var{object}, returning a bastion for the object. Any attempt to access one of the object's attributes will have to be approved by the \var{filter} function; if the access is diff --git a/Doc/libbinhex.tex b/Doc/libbinhex.tex index aae5074..560b401 100644 --- a/Doc/libbinhex.tex +++ b/Doc/libbinhex.tex @@ -11,14 +11,14 @@ The \code{binhex} module defines the following functions: \setindexsubitem{(in module binhex)} -\begin{funcdesc}{binhex}{input\, output} +\begin{funcdesc}{binhex}{input, output} Convert a binary file with filename \var{input} to binhex file \var{output}. The \var{output} parameter can either be a filename or a file-like object (any object supporting a \var{write} and \var{close} method). \end{funcdesc} -\begin{funcdesc}{hexbin}{input\optional{\, output}} +\begin{funcdesc}{hexbin}{input\optional{, output}} Decode a binhex file \var{input}. \var{input} may be a filename or a file-like object supporting \var{read} and \var{close} methods. The resulting file is written to a file named \var{output}, unless the diff --git a/Doc/libcgi.tex b/Doc/libcgi.tex index fa2b6b7..55abd10 100644 --- a/Doc/libcgi.tex +++ b/Doc/libcgi.tex @@ -191,7 +191,7 @@ Parse a query string given as a string argument (data of type \mimetype{application/x-www-form-urlencoded}). \end{funcdesc} -\begin{funcdesc}{parse_multipart}{fp\, pdict} +\begin{funcdesc}{parse_multipart}{fp, pdict} Parse input of type \mimetype{multipart/form-data} (for file uploads). Arguments are \var{fp} for the input file and \var{pdict} for the dictionary containing other parameters of @@ -236,7 +236,7 @@ Print a list of useful (used by CGI) environment variables in HTML. \end{funcdesc} -\begin{funcdesc}{escape}{s\optional{\, quote}} +\begin{funcdesc}{escape}{s\optional{, quote}} Convert the characters \character{\&}, \character{<} and \character{>} in string \var{s} to HTML-safe sequences. Use this if you need to display text that might diff --git a/Doc/libcrypt.tex b/Doc/libcrypt.tex index 777f87e..a4c0bb7 100644 --- a/Doc/libcrypt.tex +++ b/Doc/libcrypt.tex @@ -10,7 +10,7 @@ attempting to crack \UNIX{} passwords with a dictionary. \index{crypt(3)} \setindexsubitem{(in module crypt)} -\begin{funcdesc}{crypt}{word\, salt} +\begin{funcdesc}{crypt}{word, salt} \var{word} will usually be a user's password. \var{salt} is a 2-character string which will be used to select one of 4096 variations of DES\indexii{cipher}{DES}. The characters in \var{salt} must be diff --git a/Doc/libctb.tex b/Doc/libctb.tex index 36d1289..cd8c72c 100644 --- a/Doc/libctb.tex +++ b/Doc/libctb.tex @@ -34,7 +34,7 @@ Bits in the status as returned by \var{Status}. Return 1 if the communication toolbox is available, zero otherwise. \end{funcdesc} -\begin{funcdesc}{CMNew}{name\, sizes} +\begin{funcdesc}{CMNew}{name, sizes} Create a connection object using the connection tool named \var{name}. \var{sizes} is a 6-tuple given buffer sizes for data in, data out, control in, control out, attention in and attention out. @@ -77,21 +77,21 @@ Accept (when \var{yesno} is non-zero) or reject an incoming call after \var{Listen} returned. \end{funcdesc} -\begin{funcdesc}{Close}{timeout\, now} +\begin{funcdesc}{Close}{timeout, now} Close a connection. When \var{now} is zero, the close is orderly (i.e.\ outstanding output is flushed, etc.)\ with a timeout of \var{timeout} seconds. When \var{now} is non-zero the close is immediate, discarding output. \end{funcdesc} -\begin{funcdesc}{Read}{len\, chan\, timeout} +\begin{funcdesc}{Read}{len, chan, timeout} Read \var{len} bytes, or until \var{timeout} seconds have passed, from the channel \var{chan} (which is one of \var{cmData}, \var{cmCntl} or \var{cmAttn}). Return a 2-tuple:\ the data read and the end-of-message flag. \end{funcdesc} -\begin{funcdesc}{Write}{buf\, chan\, timeout\, eom} +\begin{funcdesc}{Write}{buf, chan, timeout, eom} Write \var{buf} to channel \var{chan}, aborting after \var{timeout} seconds. When \var{eom} has the value \var{cmFlagsEOM} an end-of-message indicator will be written after the data (if this diff --git a/Doc/libdbm.tex b/Doc/libdbm.tex index 416a6b0..35e0b4c 100644 --- a/Doc/libdbm.tex +++ b/Doc/libdbm.tex @@ -20,7 +20,7 @@ Raised on dbm-specific errors, such as I/O errors. \code{KeyError} is raised for general mapping errors like specifying an incorrect key. \end{excdesc} -\begin{funcdesc}{open}{filename\, \optional{flag\, \optional{mode}}} +\begin{funcdesc}{open}{filename, \optional{flag, \optional{mode}}} Open a dbm database and return a dbm object. The \var{filename} argument is the name of the database file (without the \file{.dir} or \file{.pag} extensions). diff --git a/Doc/libdis.tex b/Doc/libdis.tex index b4c74fb..e11a1f6 100644 --- a/Doc/libdis.tex +++ b/Doc/libdis.tex @@ -49,7 +49,7 @@ traceback if none was passed. The instruction causing the exception is indicated. \end{funcdesc} -\begin{funcdesc}{disassemble}{code\optional{\, lasti}} +\begin{funcdesc}{disassemble}{code\optional{, lasti}} Disassembles a code object, indicating the last instruction if \var{lasti} was provided. The output is divided in the following columns: \begin{itemize} @@ -65,7 +65,7 @@ variable names, constant values, branch targets, and compare operators. \end{funcdesc} -\begin{funcdesc}{disco}{code\optional{\, lasti}} +\begin{funcdesc}{disco}{code\optional{, lasti}} A synonym for disassemble. It is more convenient to type, and kept for compatibility with earlier Python releases. \end{funcdesc} diff --git a/Doc/libformatter.tex b/Doc/libformatter.tex index 8c9ab3e..5d06995 100644 --- a/Doc/libformatter.tex +++ b/Doc/libformatter.tex @@ -66,7 +66,7 @@ Add a hard line break if one does not already exist. This does not break the logical paragraph. \end{funcdesc} -\begin{funcdesc}{add_hor_rule}{*args\, **kw} +\begin{funcdesc}{add_hor_rule}{*args, **kw} Insert a horizontal rule in the output. A hard break is inserted if there is data in the current paragraph, but the logical paragraph is not broken. The arguments and keywords are passed on to the writer's @@ -268,7 +268,7 @@ lines, or the equivelent. The \var{blankline} value will be an integer. \end{funcdesc} -\begin{funcdesc}{send_hor_rule}{*args\, **kw} +\begin{funcdesc}{send_hor_rule}{*args, **kw} Display a horizontal rule on the output device. The arguments to this method are entirely application- and writer-specific, and should be interpreted with care. The method implementation may assume that a @@ -317,7 +317,7 @@ else. Each method simply announces itself by printing its name and arguments on standard output. \end{classdesc} -\begin{classdesc}{DumbWriter}{\optional{file\optional{\, maxcol\code{ = 72}}}} +\begin{classdesc}{DumbWriter}{\optional{file\optional{, maxcol\code{ = 72}}}} Simple writer class which writes output on the file object passed in as \var{file} or, if \var{file} is omitted, on standard output. The output is simply word-wrapped to the number of columns specified by diff --git a/Doc/libframework.tex b/Doc/libframework.tex index 012b8c5..6b8c5fa 100644 --- a/Doc/libframework.tex +++ b/Doc/libframework.tex @@ -31,14 +31,14 @@ An object representing the menubar. This object is usually not created by the user. \end{funcdesc} -\begin{funcdesc}{Menu}{bar\, title\optional{\, after}} +\begin{funcdesc}{Menu}{bar, title\optional{, after}} An object representing a menu. Upon creation you pass the \code{MenuBar} the menu appears in, the \var{title} string and a position (1-based) \var{after} where the menu should appear (default: at the end). \end{funcdesc} -\begin{funcdesc}{MenuItem}{menu\, title\optional{\, shortcut\, callback}} +\begin{funcdesc}{MenuItem}{menu, title\optional{, shortcut, callback}} Create a menu item object. The arguments are the menu to crate the item it, the item title string and optionally the keyboard shortcut and a callback routine. The callback is called with the arguments @@ -58,7 +58,7 @@ correct dimming for all menu items based on the current front window. Add a separator to the end of a menu. \end{funcdesc} -\begin{funcdesc}{SubMenu}{menu\, label} +\begin{funcdesc}{SubMenu}{menu, label} Create a submenu named \var{label} under menu \var{menu}. The menu object is returned. \end{funcdesc} @@ -72,7 +72,7 @@ which the window belongs. The window is not displayed until later. Creates a modeless dialog window. \end{funcdesc} -\begin{funcdesc}{windowbounds}{width\, height} +\begin{funcdesc}{windowbounds}{width, height} Return a \code{(left, top, right, bottom)} tuple suitable for creation of a window of given width and height. The window will be staggered with respect to previous windows, and an attempt is made to keep the @@ -104,7 +104,7 @@ application. Alternatively, override the \code{do_about} method for more elaborate about messages. \end{funcdesc} -\begin{funcdesc}{mainloop}{\optional{mask\, wait}} +\begin{funcdesc}{mainloop}{\optional{mask, wait}} This routine is the main event loop, call it to set your application rolling. \var{Mask} is the mask of events you want to handle, \var{wait} is the number of ticks you want to leave to other @@ -145,7 +145,7 @@ The old on/off value is returned. Terminate the event \code{mainloop} at the next convenient moment. \end{funcdesc} -\begin{funcdesc}{do_char}{c\, event} +\begin{funcdesc}{do_char}{c, event} The user typed character \var{c}. The complete details of the event can be found in the \var{event} structure. This method can also be provided in a \code{Window} object, which overrides the @@ -181,22 +181,22 @@ Override this method to do any special processing on window close. Call \code{self.do_postclose} to cleanup the parent state. \end{funcdesc} -\begin{funcdesc}{do_postresize}{width\, height\, macoswindowid} +\begin{funcdesc}{do_postresize}{width, height, macoswindowid} Called after the window is resized. Override if more needs to be done than calling \code{InvalRect}. \end{funcdesc} -\begin{funcdesc}{do_contentclick}{local\, modifiers\, event} +\begin{funcdesc}{do_contentclick}{local, modifiers, event} The user clicked in the content part of a window. The arguments are the coordinates (window-relative), the key modifiers and the raw event. \end{funcdesc} -\begin{funcdesc}{do_update}{macoswindowid\, event} +\begin{funcdesc}{do_update}{macoswindowid, event} An update event for the window was received. Redraw the window. \end{funcdesc} -\begin{funcdesc}{do_activate}{activate\, event} +\begin{funcdesc}{do_activate}{activate, event} The window was activated (\code{activate==1}) or deactivated (\code{activate==0}). Handle things like focus highlighting, etc. \end{funcdesc} @@ -208,7 +208,7 @@ ControlsWindow objects have the following methods besides those of \setindexsubitem{(ControlsWindow method)} -\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event} +\begin{funcdesc}{do_controlhit}{window, control, pcode, event} Part \code{pcode} of control \code{control} was hit by the user. Tracking and such has already been taken care of. \end{funcdesc} @@ -220,7 +220,7 @@ extra methods: \setindexsubitem{(ScrolledWindow method)} -\begin{funcdesc}{scrollbars}{\optional{wantx\, wanty}} +\begin{funcdesc}{scrollbars}{\optional{wantx, wanty}} Create (or destroy) horizontal and vertical scrollbars. The arguments specify which you want (default: both). The scrollbars always have minimum \code{0} and maximum \code{32767}. @@ -238,32 +238,32 @@ Call this method when the document has changed. It will call \code{getscrollbarvalues} and update the scrollbars. \end{funcdesc} -\begin{funcdesc}{scrollbar_callback}{which\, what\, value} +\begin{funcdesc}{scrollbar_callback}{which, what, value} Supplied by you and called after user interaction. \code{Which} will be \code{'x'} or \code{'y'}, \code{what} will be \code{'-'}, \code{'--'}, \code{'set'}, \code{'++'} or \code{'+'}. For \code{'set'}, \code{value} will contain the new scrollbar position. \end{funcdesc} -\begin{funcdesc}{scalebarvalues}{absmin\, absmax\, curmin\, curmax} +\begin{funcdesc}{scalebarvalues}{absmin, absmax, curmin, curmax} Auxiliary method to help you calculate values to return from \code{getscrollbarvalues}. You pass document minimum and maximum value and topmost (leftmost) and bottommost (rightmost) visible values and it returns the correct number or \code{None}. \end{funcdesc} -\begin{funcdesc}{do_activate}{onoff\, event} +\begin{funcdesc}{do_activate}{onoff, event} Takes care of dimming/highlighting scrollbars when a window becomes frontmost vv. If you override this method call this one at the end of your method. \end{funcdesc} -\begin{funcdesc}{do_postresize}{width\, height\, window} +\begin{funcdesc}{do_postresize}{width, height, window} Moves scrollbars to the correct position. Call this method initially if you override it. \end{funcdesc} -\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event} +\begin{funcdesc}{do_controlhit}{window, control, pcode, event} Handles scrollbar interaction. If you override it call this method first, a nonzero return value indicates the hit was in the scrollbars and has been handled. @@ -281,7 +281,7 @@ Create the dialog window, from the DLOG resource with id \var{resid}. The dialog object is stored in \code{self.wid}. \end{funcdesc} -\begin{funcdesc}{do_itemhit}{item\, event} +\begin{funcdesc}{do_itemhit}{item, event} Item number \var{item} was hit. You are responsible for redrawing toggle buttons, etc. \end{funcdesc} diff --git a/Doc/libfuncs.tex b/Doc/libfuncs.tex index d00ba10..e914e80 100644 --- a/Doc/libfuncs.tex +++ b/Doc/libfuncs.tex @@ -54,7 +54,7 @@ find the \code{eggs} variable. complex number, its magnitude is returned. \end{funcdesc} -\begin{funcdesc}{apply}{function\, args\optional{, keywords}} +\begin{funcdesc}{apply}{function, args\optional{, keywords}} The \var{function} argument must be a callable object (a user-defined or built-in function or method, or a class object) and the \var{args} argument must be a tuple. The \var{function} is called with @@ -82,20 +82,20 @@ class instances are callable if they have a \method{__call__()} method. inclusive. \end{funcdesc} -\begin{funcdesc}{cmp}{x\, y} +\begin{funcdesc}{cmp}{x, y} Compare the two objects \var{x} and \var{y} and return an integer according to the outcome. The return value is negative if \code{\var{x} < \var{y}}, zero if \code{\var{x} == \var{y}} and strictly positive if \code{\var{x} > \var{y}}. \end{funcdesc} -\begin{funcdesc}{coerce}{x\, y} +\begin{funcdesc}{coerce}{x, y} Return a tuple consisting of the two numeric arguments converted to a common type, using the same rules as used by arithmetic operations. \end{funcdesc} -\begin{funcdesc}{compile}{string\, filename\, kind} +\begin{funcdesc}{compile}{string, filename, kind} Compile the \var{string} into a code object. Code objects can be executed by an \keyword{exec} statement or evaluated by a call to \function{eval()}. The \var{filename} argument should @@ -117,7 +117,7 @@ class instances are callable if they have a \method{__call__()} method. \function{long()} and \function{float()}. \end{funcdesc} -\begin{funcdesc}{delattr}{object\, name} +\begin{funcdesc}{delattr}{object, name} This is a relative of \function{setattr()}. The arguments are an object and a string. The string must be the name of one of the object's attributes. The function deletes @@ -146,7 +146,7 @@ class instances are callable if they have a \method{__call__()} method. \end{verbatim} \end{funcdesc} -\begin{funcdesc}{divmod}{a\, b} +\begin{funcdesc}{divmod}{a, b} Take two numbers as arguments and return a pair of numbers consisting of their quotient and remainder when using long division. With mixed operand types, the rules for binary arithmetic operators apply. For @@ -156,7 +156,7 @@ class instances are callable if they have a \method{__call__()} method. \code{(math.floor(\var{a} / \var{b}), \var{a} \%{} \var{b})}. \end{funcdesc} -\begin{funcdesc}{eval}{expression\optional{\, globals\optional{\, locals}}} +\begin{funcdesc}{eval}{expression\optional{, globals\optional{, locals}}} The arguments are a string and two optional dictionaries. The \var{expression} argument is parsed and evaluated as a Python expression (technically speaking, a condition list) using the @@ -188,7 +188,7 @@ class instances are callable if they have a \method{__call__()} method. \function{execfile()}. \end{funcdesc} -\begin{funcdesc}{execfile}{file\optional{\, globals\optional{\, locals}}} +\begin{funcdesc}{execfile}{file\optional{, globals\optional{, locals}}} This function is similar to the \keyword{exec} statement, but parses a file instead of a string. It is different from the \keyword{import} statement in that it does not @@ -206,7 +206,7 @@ class instances are callable if they have a \method{__call__()} method. \code{None}. \end{funcdesc} -\begin{funcdesc}{filter}{function\, list} +\begin{funcdesc}{filter}{function, list} Construct a list from those elements of \var{list} for which \var{function} returns true. If \var{list} is a string or a tuple, the result also has that type; otherwise it is always a list. If @@ -226,7 +226,7 @@ removed. returned. \end{funcdesc} -\begin{funcdesc}{getattr}{object\, name} +\begin{funcdesc}{getattr}{object, name} The arguments are an object and a string. The string must be the name of one of the object's attributes. The result is the value of that attribute. For example, \code{getattr(\var{x}, @@ -240,7 +240,7 @@ function or method, this is the module where it is defined, not the module from which it is called). \end{funcdesc} -\begin{funcdesc}{hasattr}{object\, name} +\begin{funcdesc}{hasattr}{object, name} The arguments are an object and a string. The result is 1 if the string is the name of one of the object's attributes, 0 if not. (This is implemented by calling \code{getattr(\var{object}, @@ -355,7 +355,7 @@ desired effect. see the description of \function{int()}. \end{funcdesc} -\begin{funcdesc}{map}{function\, list\, ...} +\begin{funcdesc}{map}{function, list, ...} Apply \var{function} to every item of \var{list} and return a list of the results. If additional \var{list} arguments are passed, \var{function} must take that many arguments and is applied to @@ -388,7 +388,7 @@ any kind of sequence; the result is always a list. \exception{OverflowError} exception. \end{funcdesc} -\begin{funcdesc}{open}{filename\optional{\, mode\optional{\, bufsize}}} +\begin{funcdesc}{open}{filename\optional{, mode\optional{, bufsize}}} Return a new file object (described earlier under Built-in Types). The first two arguments are the same as for \code{stdio}'s \cfunction{fopen()}: \var{filename} is the file name to be opened, @@ -423,7 +423,7 @@ there's no reliable way to determine whether this is the case.} \function{chr()}. \end{funcdesc} -\begin{funcdesc}{pow}{x\, y\optional{\, z}} +\begin{funcdesc}{pow}{x, y\optional{, z}} Return \var{x} to the power \var{y}; if \var{z} is present, return \var{x} to the power \var{y}, modulo \var{z} (computed more efficiently than \code{pow(\var{x}, \var{y}) \% \var{z}}). @@ -435,7 +435,7 @@ there's no reliable way to determine whether this is the case.} 35000)} is not allowed. \end{funcdesc} -\begin{funcdesc}{range}{\optional{start\,} stop\optional{\, step}} +\begin{funcdesc}{range}{\optional{start,} stop\optional{, step}} This is a versatile function to create lists containing arithmetic progressions. It is most often used in \keyword{for} loops. The arguments must be plain integers. If the \var{step} argument is @@ -487,7 +487,7 @@ If the \module{readline} module was loaded, then line editing and history features. \end{funcdesc} -\begin{funcdesc}{reduce}{function\, list\optional{\, initializer}} +\begin{funcdesc}{reduce}{function, list\optional{, initializer}} Apply the binary \var{function} to the items of \var{list} so as to reduce the list to a single value. E.g., \code{reduce(lambda x, y: x*y, \var{list}, 1)} returns the product of @@ -551,7 +551,7 @@ to return a string that would yield an object with the same value when passed to \function{eval()}. \end{funcdesc} -\begin{funcdesc}{round}{x\, n} +\begin{funcdesc}{round}{x, n} Return the floating point value \var{x} rounded to \var{n} digits after the decimal point. If \var{n} is omitted, it defaults to zero. The result is a floating point number. Values are rounded to the @@ -560,7 +560,7 @@ when passed to \function{eval()}. \code{round(0.5)} is \code{1.0} and \code{round(-0.5)} is \code{-1.0}). \end{funcdesc} -\begin{funcdesc}{setattr}{object\, name\, value} +\begin{funcdesc}{setattr}{object, name, value} This is the counterpart of \function{getattr()}. The arguments are an object, a string and an arbitrary value. The string must be the name of one of the object's attributes. The function assigns the value to @@ -569,7 +569,7 @@ when passed to \function{eval()}. \code{\var{x}.\var{foobar} = 123}. \end{funcdesc} -\begin{funcdesc}{slice}{\optional{start\,} stop\optional{\, step}} +\begin{funcdesc}{slice}{\optional{start,} stop\optional{, step}} Return a slice object representing the set of indices specified by \code{range(\var{start}, \var{stop}, \var{step})}. The \var{start} and \var{step} arguments default to None. Slice objects have @@ -623,7 +623,7 @@ cannot normally be affected this way, but variables retrieved from other scopes (e.g. modules) can be. This may change.} \end{funcdesc} -\begin{funcdesc}{xrange}{\optional{start\,} stop\optional{\, step}} +\begin{funcdesc}{xrange}{\optional{start,} stop\optional{, step}} This function is very similar to \function{range()}, but returns an ``xrange object'' instead of a list. This is an opaque sequence type which yields the same values as the corresponding list, without diff --git a/Doc/libgdbm.tex b/Doc/libgdbm.tex index 73fc9ab..08d447f 100644 --- a/Doc/libgdbm.tex +++ b/Doc/libgdbm.tex @@ -35,7 +35,7 @@ Raised on \code{gdbm}-specific errors, such as I/O errors. \code{KeyError} is raised for general mapping errors like specifying an incorrect key. \end{excdesc} -\begin{funcdesc}{open}{filename\, \optional{flag\, \optional{mode}}} +\begin{funcdesc}{open}{filename, \optional{flag, \optional{mode}}} Open a \code{gdbm} database and return a \code{gdbm} object. The \var{filename} argument is the name of the database file. diff --git a/Doc/libgl.tex b/Doc/libgl.tex index b694d86..7208695 100644 --- a/Doc/libgl.tex +++ b/Doc/libgl.tex @@ -119,7 +119,7 @@ Similar to but the pairs have the point first and the normal second. \end{funcdesc} -\begin{funcdesc}{nurbssurface}{s_k\, t_k\, ctl\, s_ord\, t_ord\, type} +\begin{funcdesc}{nurbssurface}{s_k, t_k, ctl, s_ord, t_ord, type} % XXX s_k[], t_k[], ctl[][] Defines a nurbs surface. The dimensions of @@ -129,13 +129,13 @@ are computed as follows: \code{[len(\var{t_k}) - \var{t_ord}]}. \end{funcdesc} -\begin{funcdesc}{nurbscurve}{knots\, ctlpoints\, order\, type} +\begin{funcdesc}{nurbscurve}{knots, ctlpoints, order, type} Defines a nurbs curve. The length of ctlpoints is \code{len(\var{knots}) - \var{order}}. \end{funcdesc} -\begin{funcdesc}{pwlcurve}{points\, type} +\begin{funcdesc}{pwlcurve}{points, type} Defines a piecewise-linear curve. \var{points} is a list of points. diff --git a/Doc/libhtmllib.tex b/Doc/libhtmllib.tex index c3c9c9f..dff837c 100644 --- a/Doc/libhtmllib.tex +++ b/Doc/libhtmllib.tex @@ -86,7 +86,7 @@ affects the operation of \method{handle_data()} and \method{save_end()}. \setindexsubitem{(HTMLParser method)} -\begin{funcdesc}{anchor_bgn}{href\, name\, type} +\begin{funcdesc}{anchor_bgn}{href, name, type} This method is called at the start of an anchor region. The arguments correspond to the attributes of the \code{} tag with the same names. The default implementation maintains a list of hyperlinks @@ -100,7 +100,7 @@ implementation adds a textual footnote marker using an index into the list of hyperlinks created by \method{anchor_bgn()}. \end{funcdesc} -\begin{funcdesc}{handle_image}{source\, alt\optional{\, ismap\optional{\, align\optional{\, width\optional{\, height}}}}} +\begin{funcdesc}{handle_image}{source, alt\optional{, ismap\optional{, align\optional{, width\optional{, height}}}}} This method is called to handle images. The default implementation simply passes the \var{alt} value to the \method{handle_data()} method. diff --git a/Doc/libimageop.tex b/Doc/libimageop.tex index e5d494d..4a93487 100644 --- a/Doc/libimageop.tex +++ b/Doc/libimageop.tex @@ -17,7 +17,7 @@ per pixel, etc. \end{excdesc} -\begin{funcdesc}{crop}{image\, psize\, width\, height\, x0\, y0\, x1\, y1} +\begin{funcdesc}{crop}{image, psize, width, height, x0, y0, x1, y1} Return the selected part of \var{image}, which should by \var{width} by \var{height} in size and consist of pixels of \var{psize} bytes. \var{x0}, \var{y0}, \var{x1} and \var{y1} are like @@ -28,14 +28,14 @@ that fall outside the old image will have their value set to zero. If holds for the y coordinates. \end{funcdesc} -\begin{funcdesc}{scale}{image\, psize\, width\, height\, newwidth\, newheight} +\begin{funcdesc}{scale}{image, psize, width, height, newwidth, newheight} Return \var{image} scaled to size \var{newwidth} by \var{newheight}. No interpolation is done, scaling is done by simple-minded pixel duplication or removal. Therefore, computer-generated images or dithered images will not look nice after scaling. \end{funcdesc} -\begin{funcdesc}{tovideo}{image\, psize\, width\, height} +\begin{funcdesc}{tovideo}{image, psize, width, height} Run a vertical low-pass filter over an image. It does so by computing each destination pixel as the average of two vertically-aligned source pixels. The main use of this routine is to forestall excessive @@ -43,18 +43,18 @@ flicker if the image is displayed on a video device that uses interlacing, hence the name. \end{funcdesc} -\begin{funcdesc}{grey2mono}{image\, width\, height\, threshold} +\begin{funcdesc}{grey2mono}{image, width, height, threshold} Convert a 8-bit deep greyscale image to a 1-bit deep image by tresholding all the pixels. The resulting image is tightly packed and is probably only useful as an argument to \code{mono2grey}. \end{funcdesc} -\begin{funcdesc}{dither2mono}{image\, width\, height} +\begin{funcdesc}{dither2mono}{image, width, height} Convert an 8-bit greyscale image to a 1-bit monochrome image using a (simple-minded) dithering algorithm. \end{funcdesc} -\begin{funcdesc}{mono2grey}{image\, width\, height\, p0\, p1} +\begin{funcdesc}{mono2grey}{image, width, height, p0, p1} Convert a 1-bit monochrome image to an 8 bit greyscale or color image. All pixels that are zero-valued on input get value \var{p0} on output and all one-value input pixels get value \var{p1} on output. To @@ -62,26 +62,26 @@ convert a monochrome black-and-white image to greyscale pass the values \code{0} and \code{255} respectively. \end{funcdesc} -\begin{funcdesc}{grey2grey4}{image\, width\, height} +\begin{funcdesc}{grey2grey4}{image, width, height} Convert an 8-bit greyscale image to a 4-bit greyscale image without dithering. \end{funcdesc} -\begin{funcdesc}{grey2grey2}{image\, width\, height} +\begin{funcdesc}{grey2grey2}{image, width, height} Convert an 8-bit greyscale image to a 2-bit greyscale image without dithering. \end{funcdesc} -\begin{funcdesc}{dither2grey2}{image\, width\, height} +\begin{funcdesc}{dither2grey2}{image, width, height} Convert an 8-bit greyscale image to a 2-bit greyscale image with dithering. As for \code{dither2mono}, the dithering algorithm is currently very simple. \end{funcdesc} -\begin{funcdesc}{grey42grey}{image\, width\, height} +\begin{funcdesc}{grey42grey}{image, width, height} Convert a 4-bit greyscale image to an 8-bit greyscale image. \end{funcdesc} -\begin{funcdesc}{grey22grey}{image\, width\, height} +\begin{funcdesc}{grey22grey}{image, width, height} Convert a 2-bit greyscale image to an 8-bit greyscale image. \end{funcdesc} diff --git a/Doc/libimgfile.tex b/Doc/libimgfile.tex index 098d59b..8ec31e3 100644 --- a/Doc/libimgfile.tex +++ b/Doc/libimgfile.tex @@ -30,7 +30,7 @@ the string. This format is suitable to pass to \code{gl.lrectwrite}, for instance. \end{funcdesc} -\begin{funcdesc}{readscaled}{file\, x\, y\, filter\optional{\, blur}} +\begin{funcdesc}{readscaled}{file, x, y, filter\optional{, blur}} This function is identical to read but it returns an image that is scaled to the given \var{x} and \var{y} sizes. If the \var{filter} and \var{blur} parameters are omitted scaling is done by @@ -55,7 +55,7 @@ compatible with SGI GL) or from top to bottom(flag is one, compatible with X). The default is zero. \end{funcdesc} -\begin{funcdesc}{write}{file\, data\, x\, y\, z} +\begin{funcdesc}{write}{file, data, x, y, z} This function writes the RGB or greyscale data in \var{data} to image file \var{file}. \var{x} and \var{y} give the size of the image, \var{z} is 1 for 1 byte greyscale images or 3 for RGB images (which are diff --git a/Doc/libimp.tex b/Doc/libimp.tex index 0d0bccc..5664c81 100644 --- a/Doc/libimp.tex +++ b/Doc/libimp.tex @@ -188,7 +188,7 @@ shared libraries is highly system dependent, and not all systems support it.) \end{funcdesc} -\begin{funcdesc}{load_source}{name\, pathname\, file} +\begin{funcdesc}{load_source}{name, pathname, file} Load and initialize a module implemented as a Python source file and return its module object. If the module was already initialized, it will be initialized \emph{again}. The \var{name} argument is used to diff --git a/Doc/libmacconsole.tex b/Doc/libmacconsole.tex index bd601b9..1916025 100644 --- a/Doc/libmacconsole.tex +++ b/Doc/libmacconsole.tex @@ -95,7 +95,7 @@ displayed in inverse video (this disables the upper half of a non-\ASCII{} character set). \end{funcdesc} -\begin{funcdesc}{gotoxy}{x\, y} +\begin{funcdesc}{gotoxy}{x, y} Set the cursor to position \code{(\var{x}, \var{y})}. \end{funcdesc} diff --git a/Doc/libmacfs.tex b/Doc/libmacfs.tex index 647e004..5373d31 100644 --- a/Doc/libmacfs.tex +++ b/Doc/libmacfs.tex @@ -2,16 +2,16 @@ \label{module-macfs} \bimodindex{macfs} -\setindexsubitem{(in module macfs)} -This module provides access to macintosh FSSpec handling, the Alias +This module provides access to Macintosh FSSpec handling, the Alias Manager, finder aliases and the Standard File package. Whenever a function or method expects a \var{file} argument, this argument can be one of three things:\ (1) a full or partial Macintosh -pathname, (2) an FSSpec object or (3) a 3-tuple \code{(wdRefNum, -parID, name)} as described in Inside Mac VI\@. A description of aliases -and the standard file package can also be found there. +pathname, (2) an FSSpec object or (3) a 3-tuple \code{(\var{wdRefNum}, +\var{parID}, \var{name})} as described in \emph{Inside Macintosh +VI}\@. A description of aliases and the standard file package can also +be found there. \begin{funcdesc}{FSSpec}{file} Create an FSSpec object for the specified file. @@ -41,7 +41,7 @@ Resolve an alias file. Returns a 3-tuple \code{(\var{fsspec}, \var{isfolder}, (otherwise the FSSpec object for the file itself is returned). \end{funcdesc} -\begin{funcdesc}{StandardGetFile}{\optional{type\, ...}} +\begin{funcdesc}{StandardGetFile}{\optional{type, ...}} Present the user with a standard ``open input file'' dialog. Optionally, you can pass up to four 4-char file types to limit the files the user can choose from. The function returns an FSSpec @@ -49,11 +49,11 @@ object and a flag indicating that the user completed the dialog without cancelling. \end{funcdesc} -\begin{funcdesc}{PromptGetFile}{prompt\optional{\, type\, ...}} +\begin{funcdesc}{PromptGetFile}{prompt\optional{, type, ...}} Similar to \var{StandardGetFile} but allows you to specify a prompt. \end{funcdesc} -\begin{funcdesc}{StandardPutFile}{prompt\, \optional{default}} +\begin{funcdesc}{StandardPutFile}{prompt, \optional{default}} Present the user with a standard ``open output file'' dialog. \var{prompt} is the prompt string, and the optional \var{default} argument initializes the output file name. The function @@ -79,7 +79,7 @@ behaviour with the ``general controls'' controlpanel, thereby making this call inoperative. \end{funcdesc} -\begin{funcdesc}{FindFolder}{where\, which\, create} +\begin{funcdesc}{FindFolder}{where, which, create} Locates one of the ``special'' folders that MacOS knows about, such as the trash or the Preferences folder. \var{Where} is the disk to search, \var{which} is the 4-char string specifying which folder to @@ -133,7 +133,7 @@ Create a minimal alias pointing to this file. Return the 4-char creator and type of the file. \end{funcdesc} -\begin{funcdesc}{SetCreatorType}{creator\, type} +\begin{funcdesc}{SetCreatorType}{creator, type} Set the 4-char creator and type of the file. \end{funcdesc} @@ -151,7 +151,7 @@ Return a tuple with three floating point values representing the creation date, modification date and backup date of the file. \end{funcdesc} -\begin{funcdesc}{SetDates}{crdate\, moddate\, backupdate} +\begin{funcdesc}{SetDates}{crdate, moddate, backupdate} Set the creation, modification and backup date of the file. The values are in the standard floating point format used for times throughout Python. @@ -179,7 +179,7 @@ is returned. An interface to the C routine \code{GetAliasInfo()}. \end{funcdesc} -\begin{funcdesc}{Update}{file\, \optional{file2}} +\begin{funcdesc}{Update}{file, \optional{file2}} Update the alias to point to the \var{file} given. If \var{file2} is present a relative alias will be created. \end{funcdesc} diff --git a/Doc/libmacostools.tex b/Doc/libmacostools.tex index 1553b11..c4c5842 100644 --- a/Doc/libmacostools.tex +++ b/Doc/libmacostools.tex @@ -9,7 +9,7 @@ The \code{macostools} module defines the following functions: \setindexsubitem{(in module macostools)} -\begin{funcdesc}{copy}{src\, dst\optional{\, createpath, copytimes}} +\begin{funcdesc}{copy}{src, dst\optional{, createpath, copytimes}} Copy file \var{src} to \var{dst}. The files can be specified as pathnames or \code{FSSpec} objects. If \var{createpath} is non-zero \var{dst} must be a pathname and the folders leading to the @@ -22,13 +22,13 @@ If the source is an alias the original to which the alias points is copied, not the aliasfile. \end{funcdesc} -\begin{funcdesc}{copytree}{src\, dst} +\begin{funcdesc}{copytree}{src, dst} Recursively copy a file tree from \var{src} to \var{dst}, creating folders as needed. \var{Src} and \var{dst} should be specified as pathnames. \end{funcdesc} -\begin{funcdesc}{mkalias}{src\, dst} +\begin{funcdesc}{mkalias}{src, dst} Create a finder alias \var{dst} pointing to \var{src}. Both may be specified as pathnames or \var{FSSpec} objects. \end{funcdesc} diff --git a/Doc/libmactcp.tex b/Doc/libmactcp.tex index f041280..122aa5b 100644 --- a/Doc/libmactcp.tex +++ b/Doc/libmactcp.tex @@ -78,13 +78,13 @@ Return the TCP address of this side of a connection as a 2-tuple \code{(host, port)}, both integers. \end{funcdesc} -\begin{funcdesc}{ActiveOpen}{lport\, host\, rport} +\begin{funcdesc}{ActiveOpen}{lport, host, rport} Open an outgoing connection to TCP address \code{(\var{host}, \var{rport})}. Use local port \var{lport} (zero makes the system pick a free port). This call blocks until the connection has been established. \end{funcdesc} -\begin{funcdesc}{Send}{buf\, push\, urgent} +\begin{funcdesc}{Send}{buf, push, urgent} Send data \var{buf} over the connection. \var{Push} and \var{urgent} are flags as specified by the TCP standard. \end{funcdesc} @@ -168,7 +168,7 @@ Read a datagram, waiting at most \var{timeout} seconds (-1 is infinite). Return the data. \end{funcdesc} -\begin{funcdesc}{Write}{host\, port\, buf} +\begin{funcdesc}{Write}{host, port, buf} Send \var{buf} as a datagram to IP-address \var{host}, port \var{port}. \end{funcdesc} diff --git a/Doc/libmacui.tex b/Doc/libmacui.tex index 546065f..bf8a30f 100644 --- a/Doc/libmacui.tex +++ b/Doc/libmacui.tex @@ -18,7 +18,7 @@ most 255 characters long, is displayed. Control is returned when the user clicks ``OK''. \end{funcdesc} -\begin{funcdesc}{AskString}{prompt\optional{\, default}} +\begin{funcdesc}{AskString}{prompt\optional{, default}} Ask the user to input a string value, in a modal dialog. \var{Prompt} is the promt message, the optional \var{default} arg is the initial value for the string. All strings can be at most 255 bytes @@ -26,7 +26,7 @@ long. \var{AskString} returns the string entered or \code{None} in case the user cancelled. \end{funcdesc} -\begin{funcdesc}{AskYesNoCancel}{question\optional{\, default}} +\begin{funcdesc}{AskYesNoCancel}{question\optional{, default}} Present a dialog with text \var{question} and three buttons labelled ``yes'', ``no'' and ``cancel''. Return \code{1} for yes, \code{0} for no and \code{-1} for cancel. The default return value chosen by @@ -34,7 +34,7 @@ hitting return is \code{0}. This can be changed with the optional \var{default} argument. \end{funcdesc} -\begin{funcdesc}{ProgressBar}{\optional{label\, maxval}} +\begin{funcdesc}{ProgressBar}{\optional{label, maxval}} Display a modeless progress dialog with a thermometer bar. \var{Label} is the textstring displayed (default ``Working...''), \var{maxval} is the value at which progress is complete (default 100). The returned diff --git a/Doc/libmailcap.tex b/Doc/libmailcap.tex index ecc8369..da337bb 100644 --- a/Doc/libmailcap.tex +++ b/Doc/libmailcap.tex @@ -17,7 +17,7 @@ Configuration Mechanism For Multimedia Mail Format Information,'' but is not an Internet standard. However, mailcap files are supported on most \UNIX{} systems. -\begin{funcdesc}{findmatch}{caps\, MIMEtype\, key\, filename\, plist} +\begin{funcdesc}{findmatch}{caps, MIMEtype, key, filename, plist} Return a 2-tuple; the first element is a string containing the command line to be executed (which can be passed to \code{os.system()}), and the second element is diff --git a/Doc/libmimetools.tex b/Doc/libmimetools.tex index 0ae3af5..0d4e40f 100644 --- a/Doc/libmimetools.tex +++ b/Doc/libmimetools.tex @@ -30,18 +30,18 @@ object \var{input} and write the decoded data to open file object \code{'base64'}, \code{'quoted-printable'} and \code{'uuencode'}. \end{funcdesc} -\begin{funcdesc}{encode}{input\, output\, encoding} +\begin{funcdesc}{encode}{input, output, encoding} Read data from open file object \var{input} and write it encoded using the allowed MIME \var{encoding} to open file object \var{output}. Valid values for \var{encoding} are the same as for \method{decode()}. \end{funcdesc} -\begin{funcdesc}{copyliteral}{input\, output} +\begin{funcdesc}{copyliteral}{input, output} Read lines until \EOF{} from open file \var{input} and write them to open file \var{output}. \end{funcdesc} -\begin{funcdesc}{copybinary}{input\, output} +\begin{funcdesc}{copybinary}{input, output} Read blocks until \EOF{} from open file \var{input} and write them to open file \var{output}. The block size is currently fixed at 8192. \end{funcdesc} diff --git a/Doc/libminiae.tex b/Doc/libminiae.tex index 00666fa..d898551 100644 --- a/Doc/libminiae.tex +++ b/Doc/libminiae.tex @@ -36,14 +36,14 @@ provide its own windows, etc. \setindexsubitem{(AEServer method)} -\begin{funcdesc}{installaehandler}{classe\, type\, callback} +\begin{funcdesc}{installaehandler}{classe, type, callback} Installs an AppleEvent handler. \code{Classe} and \code{type} are the four-char OSA Class and Type designators, \code{'****'} wildcards are allowed. When a matching AppleEvent is received the parameters are decoded and your callback is invoked. \end{funcdesc} -\begin{funcdesc}{callback}{_object\, **kwargs} +\begin{funcdesc}{callback}{_object, **kwargs} Your callback is called with the OSA Direct Object as first positional parameter. The other parameters are passed as keyword arguments, with the 4-char designator as name. Three extra keyword parameters are diff --git a/Doc/libmpz.tex b/Doc/libmpz.tex index 07b2170..1c4b19f 100644 --- a/Doc/libmpz.tex +++ b/Doc/libmpz.tex @@ -37,17 +37,17 @@ A number of \emph{extra} functions are defined in this module. Non mpz-arguments are converted to mpz-values first, and the functions return mpz-numbers. -\begin{funcdesc}{powm}{base\, exponent\, modulus} +\begin{funcdesc}{powm}{base, exponent, modulus} Return \code{pow(\var{base}, \var{exponent}) \%{} \var{modulus}}. If \code{\var{exponent} == 0}, return \code{mpz(1)}. In contrast to the \C-library function, this version can handle negative exponents. \end{funcdesc} -\begin{funcdesc}{gcd}{op1\, op2} +\begin{funcdesc}{gcd}{op1, op2} Return the greatest common divisor of \var{op1} and \var{op2}. \end{funcdesc} -\begin{funcdesc}{gcdext}{a\, b} +\begin{funcdesc}{gcdext}{a, b} Return a tuple \code{(\var{g}, \var{s}, \var{t})}, such that \code{\var{a}*\var{s} + \var{b}*\var{t} == \var{g} == gcd(\var{a}, \var{b})}. \end{funcdesc} @@ -61,7 +61,7 @@ return mpz-numbers. \code{\var{root}*\var{root} + \var{remainder} == \var{op}}. \end{funcdesc} -\begin{funcdesc}{divm}{numerator\, denominator\, modulus} +\begin{funcdesc}{divm}{numerator, denominator, modulus} Returns a number \var{q}. such that \code{\var{q} * \var{denominator} \%{} \var{modulus} == \var{numerator}}. One could also implement this function in Python, using \code{gcdext}. diff --git a/Doc/libparser.tex b/Doc/libparser.tex index cf45b45..ec1bae5 100644 --- a/Doc/libparser.tex +++ b/Doc/libparser.tex @@ -153,7 +153,7 @@ converted to parse trees represented as list- or tuple- trees, or may be compiled into executable code objects. Parse trees may be extracted with or without line numbering information. -\begin{funcdesc}{ast2list}{ast\optional{\, line_info\code{ = 0}}} +\begin{funcdesc}{ast2list}{ast\optional{, line_info\code{ = 0}}} This function accepts an AST object from the caller in \code{\var{ast}} and returns a Python list representing the equivelent parse tree. The resulting list representation can be used @@ -172,7 +172,7 @@ the line on which the token \emph{ends}. This information is omitted if the flag is false or omitted. \end{funcdesc} -\begin{funcdesc}{ast2tuple}{ast\optional{\, line_info\code{ = 0}}} +\begin{funcdesc}{ast2tuple}{ast\optional{, line_info\code{ = 0}}} This function accepts an AST object from the caller in \code{\var{ast}} and returns a Python tuple representing the equivelent parse tree. Other than returning a tuple instead of a @@ -184,7 +184,7 @@ representing the token. This information is omitted if the flag is false or omitted. \end{funcdesc} -\begin{funcdesc}{compileast}{ast\optional{\, filename\code{ = ''}}} +\begin{funcdesc}{compileast}{ast\optional{, filename\code{ = ''}}} The Python byte compiler can be invoked on an AST object to produce code objects which can be used as part of an \code{exec} statement or a call to the built-in \function{eval()}\bifuncindex{eval} function. diff --git a/Doc/libpdb.tex b/Doc/libpdb.tex index 5cfada5..4fe8ad1 100644 --- a/Doc/libpdb.tex +++ b/Doc/libpdb.tex @@ -69,7 +69,7 @@ NameError: spam The module defines the following functions; each enters the debugger in a slightly different way: -\begin{funcdesc}{run}{statement\optional{\, globals\optional{\, locals}}} +\begin{funcdesc}{run}{statement\optional{, globals\optional{, locals}}} Execute the \var{statement} (given as a string) under debugger control. The debugger prompt appears before any code is executed; you can set breakpoints and type \code{continue}, or you can step through @@ -81,14 +81,14 @@ the explanation of the \code{exec} statement or the \code{eval()} built-in function.) \end{funcdesc} -\begin{funcdesc}{runeval}{expression\optional{\, globals\optional{\, locals}}} +\begin{funcdesc}{runeval}{expression\optional{, globals\optional{, locals}}} Evaluate the \var{expression} (given as a a string) under debugger control. When \code{runeval()} returns, it returns the value of the expression. Otherwise this function is similar to \code{run()}. \end{funcdesc} -\begin{funcdesc}{runcall}{function\optional{\, argument\, ...}} +\begin{funcdesc}{runcall}{function\optional{, argument, ...}} Call the \var{function} (a function or method object, not a string) with the given arguments. When \code{runcall()} returns, it returns whatever the function call returned. The debugger prompt appears as diff --git a/Doc/libpickle.tex b/Doc/libpickle.tex index e2dab0a..d508e5b 100644 --- a/Doc/libpickle.tex +++ b/Doc/libpickle.tex @@ -229,7 +229,7 @@ Collection may also become a problem here.) Apart from the \code{Pickler} and \code{Unpickler} classes, the module defines the following functions, and an exception: -\begin{funcdesc}{dump}{object\, file\optional{, bin}} +\begin{funcdesc}{dump}{object, file\optional{, bin}} Write a pickled representation of \var{obect} to the open file object \var{file}. This is equivalent to \code{Pickler(\var{file}, \var{bin}).dump(\var{object})}. diff --git a/Doc/libposix.tex b/Doc/libposix.tex index 454c652..101938d 100644 --- a/Doc/libposix.tex +++ b/Doc/libposix.tex @@ -79,11 +79,11 @@ It defines the following functions and constants: Change the current working directory to \var{path}. \end{funcdesc} -\begin{funcdesc}{chmod}{path\, mode} +\begin{funcdesc}{chmod}{path, mode} Change the mode of \var{path} to the numeric \var{mode}. \end{funcdesc} -\begin{funcdesc}{chown}{path\, uid, gid} +\begin{funcdesc}{chown}{path, uid, gid} Change the owner and group id of \var{path} to the numeric \var{uid} and \var{gid}. (Not on MS-DOS.) @@ -103,19 +103,19 @@ built-in function \function{open()} or by \function{popen()} or Return a duplicate of file descriptor \var{fd}. \end{funcdesc} -\begin{funcdesc}{dup2}{fd\, fd2} +\begin{funcdesc}{dup2}{fd, fd2} Duplicate file descriptor \var{fd} to \var{fd2}, closing the latter first if necessary. \end{funcdesc} -\begin{funcdesc}{execv}{path\, args} +\begin{funcdesc}{execv}{path, args} Execute the executable \var{path} with argument list \var{args}, replacing the current process (i.e., the Python interpreter). The argument list may be a tuple or list of strings. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{execve}{path\, args\, env} +\begin{funcdesc}{execve}{path, args, env} Execute the executable \var{path} with argument list \var{args}, and environment \var{env}, replacing the current process (i.e., the Python interpreter). @@ -134,7 +134,7 @@ Note: the standard way to exit is \code{sys.exit(\var{n})}. after a \function{fork()}. \end{funcdesc} -\begin{funcdesc}{fdopen}{fd\optional{\, mode\optional{\, bufsize}}} +\begin{funcdesc}{fdopen}{fd\optional{, mode\optional{, bufsize}}} Return an open file object connected to the file descriptor \var{fd}. The \var{mode} and \var{bufsize} arguments have the same meaning as the corresponding arguments to the built-in \function{open()} function. @@ -150,7 +150,7 @@ process id in the parent. Return status for file descriptor \var{fd}, like \function{stat()}. \end{funcdesc} -\begin{funcdesc}{ftruncate}{fd\, length} +\begin{funcdesc}{ftruncate}{fd, length} Truncate the file corresponding to file descriptor \var{fd}, so that it is at most \var{length} bytes in size. \end{funcdesc} @@ -194,12 +194,12 @@ Return the current process' user id. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{kill}{pid\, sig} +\begin{funcdesc}{kill}{pid, sig} Kill the process \var{pid} with signal \var{sig}. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{link}{src\, dst} +\begin{funcdesc}{link}{src, dst} Create a hard link pointing to \var{src} named \var{dst}. (Not on MS-DOS.) \end{funcdesc} @@ -211,7 +211,7 @@ entries \code{'.'} and \code{'..'} even if they are present in the directory. \end{funcdesc} -\begin{funcdesc}{lseek}{fd\, pos\, how} +\begin{funcdesc}{lseek}{fd, pos, how} Set the current position of file descriptor \var{fd} to position \var{pos}, modified by \var{how}: \code{0} to set the position relative to the beginning of the file; \code{1} to set it relative to @@ -224,7 +224,7 @@ Like \function{stat()}, but do not follow symbolic links. (On systems without symbolic links, this is identical to \function{stat()}.) \end{funcdesc} -\begin{funcdesc}{mkfifo}{path\optional{\, mode}} +\begin{funcdesc}{mkfifo}{path\optional{, mode}} Create a FIFO (a \POSIX{} named pipe) named \var{path} with numeric mode \var{mode}. The default \var{mode} is \code{0666} (octal). The current umask value is first masked out from the mode. @@ -238,7 +238,7 @@ the client opens it for writing. Note that \function{mkfifo()} doesn't open the FIFO --- it just creates the rendezvous point. \end{funcdesc} -\begin{funcdesc}{mkdir}{path\optional{\, mode}} +\begin{funcdesc}{mkdir}{path\optional{, mode}} Create a directory named \var{path} with numeric mode \var{mode}. The default \var{mode} is \code{0777} (octal). On some systems, \var{mode} is ignored. Where it is used, the current umask value is @@ -250,7 +250,7 @@ Add \var{increment} to the process' ``niceness''. Return the new niceness. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{open}{file\, flags\optional{\, mode}} +\begin{funcdesc}{open}{file, flags\optional{, mode}} Open the file \var{file} and set various flags according to \var{flags} and possibly its mode according to \var{mode}. The default \var{mode} is \code{0777} (octal), and the current umask @@ -279,7 +279,7 @@ Lock program segments into memory. The value of \var{op} (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{popen}{command\optional{\, mode\optional{\, bufsize}}} +\begin{funcdesc}{popen}{command\optional{, mode\optional{, bufsize}}} Open a pipe to or from \var{command}. The return value is an open file object connected to the pipe, which can be read or written depending on whether \var{mode} is \code{'r'} (default) or \code{'w'}. @@ -291,7 +291,7 @@ object. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{putenv}{varname\, value} +\begin{funcdesc}{putenv}{varname, value} \index{environment variables!setting} Set the environment variable named \var{varname} to the string \var{value}. Such changes to the environment affect subprocesses @@ -309,7 +309,7 @@ actually preferable to assign to items of \code{os.environ}. Return the error message corresponding to the error code in \var{code}. \end{funcdesc} -\begin{funcdesc}{read}{fd\, n} +\begin{funcdesc}{read}{fd, n} Read at most \var{n} bytes from file descriptor \var{fd}. Return a string containing the bytes read. @@ -333,7 +333,7 @@ directory. This is identical to the \function{unlink()} function documented below. \end{funcdesc} -\begin{funcdesc}{rename}{src\, dst} +\begin{funcdesc}{rename}{src, dst} Rename the file or directory \var{src} to \var{dst}. \end{funcdesc} @@ -353,7 +353,7 @@ Calls the system call \cfunction{setpgrp()} or \cfunction{setpgrp(0, (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{setpgid}{pid\, pgrp} +\begin{funcdesc}{setpgid}{pid, pgrp} Calls the system call \cfunction{setpgid()}. See the \UNIX{} manual for the semantics. (Not on MS-DOS.) @@ -393,7 +393,7 @@ functions and constants that are useful for extracting information from a stat structure. \end{funcdesc} -\begin{funcdesc}{symlink}{src\, dst} +\begin{funcdesc}{symlink}{src, dst} Create a symbolic link pointing to \var{src} named \var{dst}. (On systems without symbolic links, this always raises \exception{error}.) \end{funcdesc} @@ -413,7 +413,7 @@ Return the process group associated with the terminal given by (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{tcsetpgrp}{fd\, pg} +\begin{funcdesc}{tcsetpgrp}{fd, pg} Set the process group associated with the terminal given by \var{fd} (an open file descriptor as returned by \function{open()}) to \var{pg}. @@ -453,7 +453,7 @@ Remove the file \var{path}. This is the same function as \code{remove}; the \code{unlink} name is its traditional \UNIX{} name. \end{funcdesc} -\begin{funcdesc}{utime}{path\, {\rm (}atime, mtime{\rm )}} +\begin{funcdesc}{utime}{path, {\rm (}atime, mtime{\rm )}} Set the access and modified time of the file to the given values. (The second argument is a tuple of two items.) \end{funcdesc} @@ -466,7 +466,7 @@ exit status (if the signal number is zero); the high bit of the low byte is set if a core file was produced. (Not on MS-DOS.) \end{funcdesc} -\begin{funcdesc}{waitpid}{pid\, options} +\begin{funcdesc}{waitpid}{pid, options} Wait for completion of a child process given by proces id, and return a tuple containing its pid and exit status indication (encoded as for \function{wait()}). The semantics of the call are affected by the @@ -476,7 +476,7 @@ normal operation. (If the system does not support MS-DOS.) \end{funcdesc} -\begin{funcdesc}{write}{fd\, str} +\begin{funcdesc}{write}{fd, str} Write the string \var{str} to file descriptor \var{fd}. Return the number of bytes actually written. diff --git a/Doc/libppath.tex b/Doc/libppath.tex index f1d17d6..6639c7c 100644 --- a/Doc/libppath.tex +++ b/Doc/libppath.tex @@ -80,7 +80,7 @@ different device than \var{p}, or whether \file{\var{p}/..} and detect mount points for all \UNIX{} and \POSIX{} variants. \end{funcdesc} -\begin{funcdesc}{join}{p\optional{\, q\optional{\, ...}}} +\begin{funcdesc}{join}{p\optional{, q\optional{, ...}}} Joins one or more path components intelligently. If any component is an absolute path, all previous components are thrown away, and joining continues. The return value is the concatenation of \var{p}, and @@ -103,7 +103,7 @@ case (use \function{normcase()} for that). On Windows, it does converts forward slashes to backward slashes. \end{funcdesc} -\begin{funcdesc}{samefile}{p\, q} +\begin{funcdesc}{samefile}{p, q} Return true if both pathname arguments refer to the same file or directory (as indicated by device number and i-node number). Raise an exception if a \function{os.stat()} call on either pathname @@ -130,7 +130,7 @@ and \var{ext} is empty or begins with a period and contains at most one period. \end{funcdesc} -\begin{funcdesc}{walk}{p\, visit\, arg} +\begin{funcdesc}{walk}{p, visit, arg} Calls the function \var{visit} with arguments \code{(\var{arg}, \var{dirname}, \var{names})} for each directory in the directory tree rooted at \var{p} (including \var{p} itself, if it is a diff --git a/Doc/libprofile.tex b/Doc/libprofile.tex index a8b2099..3fa79df 100644 --- a/Doc/libprofile.tex +++ b/Doc/libprofile.tex @@ -269,7 +269,7 @@ Profiler Extensions, which includes discussion of how to derive ``better'' profilers from the classes presented, or reading the source code for these modules. -\begin{funcdesc}{profile.run}{string\optional{\, filename\optional{\, ...}}} +\begin{funcdesc}{profile.run}{string\optional{, filename\optional{, ...}}} This function takes a single argument that has can be passed to the \keyword{exec} statement, and an optional file name. In all cases this @@ -338,7 +338,7 @@ Analysis of the profiler data is done using this class from the \setindexsubitem{(in module pstats)} -\begin{classdesc}{Stats}{filename\optional{\, ...}} +\begin{classdesc}{Stats}{filename\optional{, ...}} This class constructor creates an instance of a ``statistics object'' from a \var{filename} (or set of filenames). \class{Stats} objects are manipulated by methods, in order to print useful reports. @@ -375,7 +375,7 @@ statistics for these two entries are accumulated into a single entry. \end{funcdesc} -\begin{funcdesc}{add}{filename\optional{\, ...}} +\begin{funcdesc}{add}{filename\optional{, ...}} This method of the \class{Stats} class accumulates additional profiling information into the current profiling object. Its arguments should refer to filenames created by the corresponding @@ -384,7 +384,7 @@ version of \function{profile.run()}. Statistics for identically named single function statistics. \end{funcdesc} -\begin{funcdesc}{sort_stats}{key\optional{\, ...}} +\begin{funcdesc}{sort_stats}{key\optional{, ...}} This method modifies the \class{Stats} object by sorting it according to the supplied criteria. The argument is typically a string identifying the basis of a sort (example: \code{"time"} or @@ -441,7 +441,7 @@ now that ascending vs descending order is properly selected based on the sort key of choice. \end{funcdesc} -\begin{funcdesc}{print_stats}{restriction\optional{\, ...}} +\begin{funcdesc}{print_stats}{restriction\optional{, ...}} This method for the \class{Stats} class prints out a report as described in the \function{profile.run()} definition. @@ -476,7 +476,7 @@ and then proceed to only print the first 10\% of them. \end{funcdesc} -\begin{funcdesc}{print_callers}{restrictions\optional{\, ...}} +\begin{funcdesc}{print_callers}{restrictions\optional{, ...}} This method for the \class{Stats} class prints a list of all functions that called each function in the profiled database. The ordering is identical to that provided by \method{print_stats()}, and the definition @@ -486,7 +486,7 @@ times this specific call was made. A second non-parenthesized number is the cumulative time spent in the function at the right. \end{funcdesc} -\begin{funcdesc}{print_callees}{restrictions\optional{\, ...}} +\begin{funcdesc}{print_callees}{restrictions\optional{, ...}} This method for the \class{Stats} class prints a list of all function that were called by the indicated function. Aside from this reversal of direction of calls (re: called vs was called by), the arguments and diff --git a/Doc/libquopri.tex b/Doc/libquopri.tex index 4ad0c0f..e379e4a 100644 --- a/Doc/libquopri.tex +++ b/Doc/libquopri.tex @@ -13,7 +13,7 @@ are many such characters, as when sending a graphics file. \setindexsubitem{(in module quopri)} -\begin{funcdesc}{decode}{input\, output} +\begin{funcdesc}{decode}{input, output} Decode the contents of the \var{input} file and write the resulting decoded binary data to the \var{output} file. \var{input} and \var{output} must either be file objects or objects that @@ -21,7 +21,7 @@ mimic the file object interface. \var{input} will be read until \code{\var{input}.read()} returns an empty string. \end{funcdesc} -\begin{funcdesc}{encode}{input\, output\, quotetabs} +\begin{funcdesc}{encode}{input, output, quotetabs} Encode the contents of the \var{input} file and write the resulting quoted-printable data to the \var{output} file. \var{input} and \var{output} must either be file objects or objects that diff --git a/Doc/libregex.tex b/Doc/libregex.tex index f427a88..e3de911 100644 --- a/Doc/libregex.tex +++ b/Doc/libregex.tex @@ -192,21 +192,21 @@ The module defines these functions, and an exception: \setindexsubitem{(in module regex)} -\begin{funcdesc}{match}{pattern\, string} +\begin{funcdesc}{match}{pattern, string} Return how many characters at the beginning of \var{string} match the regular expression \var{pattern}. Return \code{-1} if the string does not match the pattern (this is different from a zero-length match!). \end{funcdesc} -\begin{funcdesc}{search}{pattern\, string} +\begin{funcdesc}{search}{pattern, string} Return the first position in \var{string} that matches the regular expression \var{pattern}. Return \code{-1} if no position in the string matches the pattern (this is different from a zero-length match anywhere!). \end{funcdesc} -\begin{funcdesc}{compile}{pattern\optional{\, translate}} +\begin{funcdesc}{compile}{pattern\optional{, translate}} Compile a regular expression pattern into a regular expression object, which can be used for matching using its \code{match()} and \code{search()} methods, described below. The optional argument @@ -252,7 +252,7 @@ expressions.) Returns the current value of the syntax flags as an integer. \end{funcdesc} -\begin{funcdesc}{symcomp}{pattern\optional{\, translate}} +\begin{funcdesc}{symcomp}{pattern\optional{, translate}} This is like \code{compile()}, but supports symbolic group names: if a parenthesis-enclosed group begins with a group name in angular brackets, e.g. \code{'\e([a-z][a-z0-9]*\e)'}, the group can @@ -279,7 +279,7 @@ equivalents. Compiled regular expression objects support these methods: \setindexsubitem{(regex method)} -\begin{funcdesc}{match}{string\optional{\, pos}} +\begin{funcdesc}{match}{string\optional{, pos}} Return how many characters at the beginning of \var{string} match the compiled regular expression. Return \code{-1} if the string does not match the pattern (this is different from a zero-length @@ -293,7 +293,7 @@ Compiled regular expression objects support these methods: is to start. \end{funcdesc} -\begin{funcdesc}{search}{string\optional{\, pos}} +\begin{funcdesc}{search}{string\optional{, pos}} Return the first position in \var{string} that matches the regular expression \code{pattern}. Return \code{-1} if no position in the string matches the pattern (this is different from a zero-length @@ -303,7 +303,7 @@ Compiled regular expression objects support these methods: \code{match()} method. \end{funcdesc} -\begin{funcdesc}{group}{index\, index\, ...} +\begin{funcdesc}{group}{index, index, ...} This method is only valid when the last call to the \code{match()} or \code{search()} method found a match. It returns one or more groups of the match. If there is a single \var{index} argument, diff --git a/Doc/libregsub.tex b/Doc/libregsub.tex index 08b990e..b4d3862 100644 --- a/Doc/libregsub.tex +++ b/Doc/libregsub.tex @@ -20,7 +20,7 @@ conversion help, see the URL \setindexsubitem{(in module regsub)} -\begin{funcdesc}{sub}{pat\, repl\, str} +\begin{funcdesc}{sub}{pat, repl, str} Replace the first occurrence of pattern \var{pat} in string \var{str} by replacement \var{repl}. If the pattern isn't found, the string is returned unchanged. The pattern may be a string or an @@ -28,7 +28,7 @@ already compiled pattern. The replacement may contain references \samp{\e \var{digit}} to subpatterns and escaped backslashes. \end{funcdesc} -\begin{funcdesc}{gsub}{pat\, repl\, str} +\begin{funcdesc}{gsub}{pat, repl, str} Replace all (non-overlapping) occurrences of pattern \var{pat} in string \var{str} by replacement \var{repl}. The same rules as for \code{sub()} apply. Empty matches for the pattern are replaced only @@ -36,7 +36,7 @@ when not adjacent to a previous match, so e.g. \code{gsub('', '-', 'abc')} returns \code{'-a-b-c-'}. \end{funcdesc} -\begin{funcdesc}{split}{str\, pat\optional{\, maxsplit}} +\begin{funcdesc}{split}{str, pat\optional{, maxsplit}} Split the string \var{str} in fields separated by delimiters matching the pattern \var{pat}, and return a list containing the fields. Only non-empty matches for the pattern are considered, so e.g. @@ -47,7 +47,7 @@ occur, and the remainder of the string is returned as the final element of the list. \end{funcdesc} -\begin{funcdesc}{splitx}{str\, pat\optional{\, maxsplit}} +\begin{funcdesc}{splitx}{str, pat\optional{, maxsplit}} Split the string \var{str} in fields separated by delimiters matching the pattern \var{pat}, and return a list containing the fields as well as the separators. For example, \code{splitx('a:::b', ':*')} returns @@ -55,7 +55,7 @@ as the separators. For example, \code{splitx('a:::b', ':*')} returns as \code{split}. \end{funcdesc} -\begin{funcdesc}{capwords}{s\optional{\, pat}} +\begin{funcdesc}{capwords}{s\optional{, pat}} Capitalize words separated by optional pattern \var{pat}. The default pattern uses any characters except letters, digits and underscores as word delimiters. Capitalization is done by changing the first diff --git a/Doc/librexec.tex b/Doc/librexec.tex index 626edd3..e301f81 100644 --- a/Doc/librexec.tex +++ b/Doc/librexec.tex @@ -151,7 +151,7 @@ Import the module \var{modulename}, raising an \exception{ImportError} exception if the module is considered unsafe. \end{funcdesc} -\begin{funcdesc}{r_open}{filename\optional{\, mode\optional{\, bufsize}}} +\begin{funcdesc}{r_open}{filename\optional{, mode\optional{, bufsize}}} Method called when \function{open()} is called in the restricted environment. The arguments are identical to those of \function{open()}, and a file object (or a class instance compatible with file objects) @@ -172,7 +172,7 @@ restricted environment's \code{sys.modules} dictionary). And their equivalents with access to restricted standard I/O streams: -\begin{funcdesc}{s_import}{modulename\optional{\, globals, locals, fromlist}} +\begin{funcdesc}{s_import}{modulename\optional{, globals, locals, fromlist}} Import the module \var{modulename}, raising an \exception{ImportError} exception if the module is considered unsafe. \end{funcdesc} diff --git a/Doc/librgbimg.tex b/Doc/librgbimg.tex index 9432d2e..cb11554 100644 --- a/Doc/librgbimg.tex +++ b/Doc/librgbimg.tex @@ -29,7 +29,7 @@ the string. This format is suitable to pass to \code{gl.lrectwrite}, for instance. \end{funcdesc} -\begin{funcdesc}{longstoimage}{data\, x\, y\, z\, file} +\begin{funcdesc}{longstoimage}{data, x, y, z, file} This function writes the RGBA data in \var{data} to image file \var{file}. \var{x} and \var{y} give the size of the image. \var{z} is 1 if the saved image should be 1 byte greyscale, 3 if the diff --git a/Doc/librotor.tex b/Doc/librotor.tex index 488a49f..e467d4e 100644 --- a/Doc/librotor.tex +++ b/Doc/librotor.tex @@ -25,7 +25,7 @@ order. The available functions in this module are: \setindexsubitem{(in module rotor)} -\begin{funcdesc}{newrotor}{key\optional{\, numrotors}} +\begin{funcdesc}{newrotor}{key\optional{, numrotors}} Return a rotor object. \var{key} is a string containing the encryption key for the object; it can contain arbitrary binary data. The key will be used to randomly generate the rotor permutations and their initial positions. diff --git a/Doc/libselect.tex b/Doc/libselect.tex index 956bf7f..5a800f5 100644 --- a/Doc/libselect.tex +++ b/Doc/libselect.tex @@ -13,7 +13,7 @@ corresponding string, as would be printed by the C function \code{perror()}. \end{excdesc} -\begin{funcdesc}{select}{iwtd\, owtd\, ewtd\optional{\, timeout}} +\begin{funcdesc}{select}{iwtd, owtd, ewtd\optional{, timeout}} This is a straightforward interface to the \UNIX{} \code{select()} system call. The first three arguments are lists of `waitable objects': either integers representing \UNIX{} file descriptors or diff --git a/Doc/libsgmllib.tex b/Doc/libsgmllib.tex index 78060ec..f93095b 100644 --- a/Doc/libsgmllib.tex +++ b/Doc/libsgmllib.tex @@ -140,7 +140,7 @@ This method is called when an end tag is found which does not correspond to any open element. \end{funcdesc} -\begin{funcdesc}{unknown_starttag}{tag\, attributes} +\begin{funcdesc}{unknown_starttag}{tag, attributes} This method is called to process an unknown start tag. It is intended to be overridden by a derived class; the base class implementation does nothing. diff --git a/Doc/libsignal.tex b/Doc/libsignal.tex index 39286a7..fd74cf8 100644 --- a/Doc/libsignal.tex +++ b/Doc/libsignal.tex @@ -124,7 +124,7 @@ The \module{signal} module defines the following functions: \UNIX{} man page \manpage{signal}{2}.) \end{funcdesc} -\begin{funcdesc}{signal}{signalnum\, handler} +\begin{funcdesc}{signal}{signalnum, handler} Set the handler for signal \var{signalnum} to the function \var{handler}. \var{handler} can be any callable Python object, or one of the special values \constant{signal.SIG_IGN} or diff --git a/Doc/libsocket.tex b/Doc/libsocket.tex index 913bb8f..aff99d4 100644 --- a/Doc/libsocket.tex +++ b/Doc/libsocket.tex @@ -260,7 +260,7 @@ specifies the maximum number of queued connections and should be at least 1; the maximum value is system-dependent (usually 5). \end{funcdesc} -\begin{funcdesc}{makefile}{\optional{mode\optional{\, bufsize}}} +\begin{funcdesc}{makefile}{\optional{mode\optional{, bufsize}}} Return a \dfn{file object} associated with the socket. (File objects were described earlier in \ref{bltin-file-objects}, ``File Objects.'') The file object references a \cfunction{dup()}ped version of the @@ -293,7 +293,7 @@ socket. The optional \var{flags} argument has the same meaning as for \method{recv()} above. Returns the number of bytes sent. \end{funcdesc} -\begin{funcdesc}{sendto}{string\optional{\, flags}\, address} +\begin{funcdesc}{sendto}{string\optional{, flags}, address} Send data to the socket. The socket should not be connected to a remote socket, since the destination socket is specified by \var{address}. The optional \var{flags} argument has the same @@ -310,7 +310,7 @@ immediately dispose of the data, a \exception{error} exception is raised; in blocking mode, the calls block until they can proceed. \end{funcdesc} -\begin{funcdesc}{setsockopt}{level\, optname\, value} +\begin{funcdesc}{setsockopt}{level, optname, value} Set the value of the given socket option (see the \UNIX{} man page \manpage{setsockopt}{2}). The needed symbolic constants are defined in the \module{socket} module (\code{SO_*} etc.). The value can be an diff --git a/Doc/libsocksvr.tex b/Doc/libsocksvr.tex index ea1b703..2ee36a4 100644 --- a/Doc/libsocksvr.tex +++ b/Doc/libsocksvr.tex @@ -123,14 +123,14 @@ the \emph{new} socket object to be used to communicate with the client, and the client's address. \end{funcdesc} -\begin{funcdesc}{handle_error}{request\, client_address} +\begin{funcdesc}{handle_error}{request, client_address} This function is called if the \member{RequestHandlerClass}'s \method{handle()} method raises an exception. The default action is to print the traceback to standard output and continue handling further requests. \end{funcdesc} -\begin{funcdesc}{process_request}{request\, client_address} +\begin{funcdesc}{process_request}{request, client_address} Calls \method{finish_request()} to create an instance of the \member{RequestHandlerClass}. If desired, this function can create a new process or thread to handle the request; the \class{ForkingMixIn} @@ -151,7 +151,7 @@ Called by the server's constructor to bind the socket to the desired address. May be overridden. \end{funcdesc} -\begin{funcdesc}{verify_request}{request\, client_address} +\begin{funcdesc}{verify_request}{request, client_address} Must return a Boolean value; if the value is true, the request will be processed, and if it's false, the request will be denied. This function can be overridden to implement access controls for a server. diff --git a/Doc/libstdwin.tex b/Doc/libstdwin.tex index b16fde6..35ff6a7 100644 --- a/Doc/libstdwin.tex +++ b/Doc/libstdwin.tex @@ -80,16 +80,16 @@ matches any single character. On the Macintosh this function currently returns an empty list. \end{funcdesc} -\begin{funcdesc}{setdefscrollbars}{hflag\, vflag} +\begin{funcdesc}{setdefscrollbars}{hflag, vflag} Set the flags controlling whether subsequently opened windows will have horizontal and/or vertical scroll bars. \end{funcdesc} -\begin{funcdesc}{setdefwinpos}{h\, v} +\begin{funcdesc}{setdefwinpos}{h, v} Set the default window position for windows opened subsequently. \end{funcdesc} -\begin{funcdesc}{setdefwinsize}{width\, height} +\begin{funcdesc}{setdefwinsize}{width, height} Set the default window size for windows opened subsequently. \end{funcdesc} @@ -176,7 +176,7 @@ Note: normally, menus are created locally; see the window method returned by this call exists. \end{funcdesc} -\begin{funcdesc}{newbitmap}{width\, height} +\begin{funcdesc}{newbitmap}{width, height} Create a new bitmap object of the given dimensions. Methods of bitmap objects are described below. Not available on the Macintosh. @@ -192,7 +192,7 @@ Display a dialog box containing the string. The user must click OK before the function returns. \end{funcdesc} -\begin{funcdesc}{askync}{prompt\, default} +\begin{funcdesc}{askync}{prompt, default} Display a dialog that prompts the user to answer a question with yes or no. Return 0 for no, 1 for yes. @@ -203,7 +203,7 @@ If the user cancels the dialog, the exception is raised. \end{funcdesc} -\begin{funcdesc}{askstr}{prompt\, default} +\begin{funcdesc}{askstr}{prompt, default} Display a dialog that prompts the user for a string. If the user hits the Return key, the default string is returned. If the user cancels the dialog, the @@ -211,7 +211,7 @@ If the user cancels the dialog, the exception is raised. \end{funcdesc} -\begin{funcdesc}{askfile}{prompt\, default\, new} +\begin{funcdesc}{askfile}{prompt, default, new} Ask the user to specify a filename. If \var{new} @@ -221,7 +221,7 @@ If the user cancels the dialog, the exception is raised. \end{funcdesc} -\begin{funcdesc}{setcutbuffer}{i\, string} +\begin{funcdesc}{setcutbuffer}{i, string} Store the string in the system's cut buffer number \var{i}, where it can be found (for pasting) by other applications. @@ -278,7 +278,7 @@ characters). Return the total line height of the current font. \end{funcdesc} -\begin{funcdesc}{textbreak}{str\, width} +\begin{funcdesc}{textbreak}{str, width} Return the number of characters of the string that fit into a space of \var{width} bits wide when drawn in the curent font. @@ -365,7 +365,7 @@ Methods of menu objects are described below. returned by this call exists. \end{funcdesc} -\begin{funcdesc}{scroll}{rect\, point} +\begin{funcdesc}{scroll}{rect, point} Scroll the given rectangle by the vector given by the point. \end{funcdesc} @@ -378,7 +378,7 @@ Move the origin of the window (its upper left corner) to the given point in the document. \end{funcdesc} -\begin{funcdesc}{setselection}{i\, str} +\begin{funcdesc}{setselection}{i, str} Attempt to set X11 selection number \var{i} to the string @@ -428,12 +428,12 @@ On X11, there are many more (see \end{sloppypar} \end{funcdesc} -\begin{funcdesc}{setwinpos}{h\, v} +\begin{funcdesc}{setwinpos}{h, v} Set the the position of the window's upper left corner (relative to the upper left corner of the screen). \end{funcdesc} -\begin{funcdesc}{setwinsize}{width\, height} +\begin{funcdesc}{setwinsize}{width, height} Set the window's size. \end{funcdesc} @@ -474,11 +474,11 @@ Drawing objects have the following methods: Draw a box just inside a rectangle. \end{funcdesc} -\begin{funcdesc}{circle}{center\, radius} +\begin{funcdesc}{circle}{center, radius} Draw a circle with given center point and radius. \end{funcdesc} -\begin{funcdesc}{elarc}{center\, \(rh\, rv\)\, \(a1\, a2\)} +\begin{funcdesc}{elarc}{center, \(rh, rv\), \(a1, a2\)} Draw an elliptical arc with given center point. \code{(\var{rh}, \var{rv})} gives the half sizes of the horizontal and vertical radii. @@ -491,11 +491,11 @@ gives the angles (in degrees) of the begin and end points. Erase a rectangle. \end{funcdesc} -\begin{funcdesc}{fillcircle}{center\, radius} +\begin{funcdesc}{fillcircle}{center, radius} Draw a filled circle with given center point and radius. \end{funcdesc} -\begin{funcdesc}{fillelarc}{center\, \(rh\, rv\)\, \(a1\, a2\)} +\begin{funcdesc}{fillelarc}{center, \(rh, rv\), \(a1, a2\)} Draw a filled elliptical arc; arguments as for \code{elarc}. \end{funcdesc} @@ -507,7 +507,7 @@ Draw a filled polygon given by a list (or tuple) of points. Invert a rectangle. \end{funcdesc} -\begin{funcdesc}{line}{p1\, p2} +\begin{funcdesc}{line}{p1, p2} Draw a line from point \var{p1} to @@ -522,20 +522,20 @@ Fill a rectangle. Draw the lines connecting the given list (or tuple) of points. \end{funcdesc} -\begin{funcdesc}{shade}{rect\, percent} +\begin{funcdesc}{shade}{rect, percent} Fill a rectangle with a shading pattern that is about \var{percent} percent filled. \end{funcdesc} -\begin{funcdesc}{text}{p\, str} +\begin{funcdesc}{text}{p, str} Draw a string starting at point p (the point specifies the top left coordinate of the string). \end{funcdesc} -\begin{funcdesc}{xorcircle}{center\, radius} -\funcline{xorelarc}{center\, \(rh\, rv\)\, \(a1\, a2\)} -\funcline{xorline}{p1\, p2} +\begin{funcdesc}{xorcircle}{center, radius} +\funcline{xorelarc}{center, \(rh, rv\), \(a1, a2\)} +\funcline{xorline}{p1, p2} \funcline{xorpoly}{points} Draw a circle, an elliptical arc, a line or a polygon, respectively, in XOR mode. @@ -570,7 +570,7 @@ default font, which is in turn initialized from the global default font when the window is created. \end{funcdesc} -\begin{funcdesc}{bitmap}{point\, bitmap\, mask} +\begin{funcdesc}{bitmap}{point, bitmap, mask} Draw the \var{bitmap} with its top left corner at \var{point}. If the optional \var{mask} argument is present, it should be either the same object as \var{bitmap}, to draw only those bits that are set @@ -608,23 +608,23 @@ The following methods are defined: \setindexsubitem{(menu method)} -\begin{funcdesc}{additem}{text\, shortcut} +\begin{funcdesc}{additem}{text, shortcut} Add a menu item with given text. The shortcut must be a string of length 1, or omitted (to specify no shortcut). \end{funcdesc} -\begin{funcdesc}{setitem}{i\, text} +\begin{funcdesc}{setitem}{i, text} Set the text of item number \var{i}. \end{funcdesc} -\begin{funcdesc}{enable}{i\, flag} +\begin{funcdesc}{enable}{i, flag} Enable or disables item \var{i}. \end{funcdesc} -\begin{funcdesc}{check}{i\, flag} +\begin{funcdesc}{check}{i, flag} Set or clear the \dfn{check mark} for item @@ -652,7 +652,7 @@ Return a tuple representing the width and height of the bitmap. function.) \end{funcdesc} -\begin{funcdesc}{setbit}{point\, bit} +\begin{funcdesc}{setbit}{point, bit} Set the value of the bit indicated by \var{point} to \var{bit}. \end{funcdesc} @@ -691,7 +691,7 @@ Pass a draw event to the text-edit block. The rectangle specifies the redraw area. \end{funcdesc} -\begin{funcdesc}{event}{type\, window\, detail} +\begin{funcdesc}{event}{type, window, detail} Pass an event gotten from \code{stdwin.getevent()} to the text-edit block. @@ -727,7 +727,7 @@ Replace the text in the focus by the given string. The new focus is an insert point at the end of the string. \end{funcdesc} -\begin{funcdesc}{setfocus}{i\, j} +\begin{funcdesc}{setfocus}{i, j} Specify the new focus. Out-of-bounds values are silently clipped. \end{funcdesc} @@ -869,7 +869,7 @@ Returns if the list is empty or all its rectangles are empty. \end{funcdesc} -\begin{funcdesc}{pointinrect}{point\, rect} +\begin{funcdesc}{pointinrect}{point, rect} Returns true if the point is inside the rectangle. By definition, a point \code{(\var{h}, \var{v})} @@ -884,7 +884,7 @@ $\var{top} \leq \var{v} < \var{bottom}$. \fi \end{funcdesc} -\begin{funcdesc}{inset}{rect\, \(dh\, dv\)} +\begin{funcdesc}{inset}{rect, \(dh, dv\)} Returns a rectangle that lies inside the \code{rect} argument by diff --git a/Doc/libstring.tex b/Doc/libstring.tex index 7242c53..98e5a80 100644 --- a/Doc/libstring.tex +++ b/Doc/libstring.tex @@ -1,12 +1,11 @@ \section{Standard Module \sectcode{string}} \label{module-string} - \stmodindex{string} This module defines some constants useful for checking character classes and some useful string functions. See the module -\code{re} for string functions based on regular expressions. -\refstmodindex{re} +\module{re}\refstmodindex{re} for string functions based on regular +expressions. The constants defined in this module are are: @@ -20,16 +19,16 @@ The constants defined in this module are are: \end{datadesc} \begin{datadesc}{letters} - The concatenation of the strings \code{lowercase} and - \code{uppercase} described below. + The concatenation of the strings \function{lowercase()} and + \function{uppercase()} described below. \end{datadesc} \begin{datadesc}{lowercase} A string containing all the characters that are considered lowercase letters. On most systems this is the string \code{'abcdefghijklmnopqrstuvwxyz'}. Do not change its definition --- - the effect on the routines \code{upper} and \code{swapcase} is - undefined. + the effect on the routines \function{upper()} and + \function{swapcase()} is undefined. \end{datadesc} \begin{datadesc}{octdigits} @@ -40,16 +39,16 @@ The constants defined in this module are are: A string containing all the characters that are considered uppercase letters. On most systems this is the string \code{'ABCDEFGHIJKLMNOPQRSTUVWXYZ'}. Do not change its definition --- - the effect on the routines \code{lower} and \code{swapcase} is - undefined. + the effect on the routines \function{lower()} and + \function{swapcase()} is undefined. \end{datadesc} \begin{datadesc}{whitespace} A string containing all characters that are considered whitespace. On most systems this includes the characters space, tab, linefeed, return, formfeed, and vertical tab. Do not change its definition --- - the effect on the routines \code{strip} and \code{split} is - undefined. + the effect on the routines \function{strip()} and \function{split()} + is undefined. \end{datadesc} The functions defined in this module are: @@ -60,10 +59,11 @@ The functions defined in this module are: Convert a string to a floating point number. The string must have the standard syntax for a floating point literal in Python, optionally preceded by a sign (\samp{+} or \samp{-}). Note that this behaves -identical to the built-in function \code{float()} when passed a string. +identical to the built-in function +\function{float()}\bifuncindex{float} when passed a string. \end{funcdesc} -\begin{funcdesc}{atoi}{s\optional{\, base}} +\begin{funcdesc}{atoi}{s\optional{, base}} Convert string \var{s} to an integer in the given \var{base}. The string must consist of one or more digits, optionally preceded by a sign (\samp{+} or \samp{-}). The \var{base} defaults to 10. If it is @@ -72,20 +72,20 @@ string (after stripping the sign): \samp{0x} or \samp{0X} means 16, \samp{0} means 8, anything else means 10. If \var{base} is 16, a leading \samp{0x} or \samp{0X} is always accepted. Note that when invoked without \var{base} or with \var{base} set to 10, this behaves -identical to the built-in function \code{int()} when passed a string. +identical to the built-in function \function{int()} when passed a string. (Also note: for a more flexible interpretation of numeric literals, -use the built-in function \code{eval()}.) -\bifuncindex{eval} +use the built-in function \function{eval()}\bifuncindex{eval}.) \end{funcdesc} -\begin{funcdesc}{atol}{s\optional{\, base}} -Convert string \var{s} to a long integer in the given \var{base}. The +\begin{funcdesc}{atol}{s\optional{, base}} +Convert string \var{s} to a long integer in the given \var{base}. The string must consist of one or more digits, optionally preceded by a sign (\samp{+} or \samp{-}). The \var{base} argument has the same -meaning as for \code{atoi()}. A trailing \samp{l} or \samp{L} is not -allowed, except if the base is 0. Note that when invoked without +meaning as for \function{atoi()}. A trailing \samp{l} or \samp{L} is +not allowed, except if the base is 0. Note that when invoked without \var{base} or with \var{base} set to 10, this behaves identical to the -built-in function \code{long()} when passed a string. +built-in function \function{long()}\bifuncindex{long} when passed a +string. \end{funcdesc} \begin{funcdesc}{capitalize}{word} @@ -93,13 +93,14 @@ Capitalize the first character of the argument. \end{funcdesc} \begin{funcdesc}{capwords}{s} -Split the argument into words using \code{split}, capitalize each word -using \code{capitalize}, and join the capitalized words using -\code{join}. Note that this replaces runs of whitespace characters by -a single space, and removes leading and trailing whitespace. +Split the argument into words using \function{split()}, capitalize +each word using \function{capitalize()}, and join the capitalized +words using \function{join()}. Note that this replaces runs of +whitespace characters by a single space, and removes leading and +trailing whitespace. \end{funcdesc} -\begin{funcdesc}{expandtabs}{s\, tabsize} +\begin{funcdesc}{expandtabs}{s, tabsize} Expand tabs in a string, i.e.\ replace them by one or more spaces, depending on the current column and the given tab size. The column number is reset to zero after each newline occurring in the string. @@ -107,29 +108,29 @@ This doesn't understand other non-printing characters or escape sequences. \end{funcdesc} -\begin{funcdesc}{find}{s\, sub\optional{\, start\optional{\,end}}} +\begin{funcdesc}{find}{s, sub\optional{, start\optional{,end}}} Return the lowest index in \var{s} where the substring \var{sub} is found such that \var{sub} is wholly contained in -\code{\var{s}[\var{start}:\var{end}]}. Return -1 on failure. +\code{\var{s}[\var{start}:\var{end}]}. Return \code{-1} on failure. Defaults for \var{start} and \var{end} and interpretation of negative values is the same as for slices. \end{funcdesc} -\begin{funcdesc}{rfind}{s\, sub\optional{\, start\optional{\,end}}} -Like \code{find} but find the highest index. +\begin{funcdesc}{rfind}{s, sub\optional{, start\optional{, end}}} +Like \function{find()} but find the highest index. \end{funcdesc} -\begin{funcdesc}{index}{s\, sub\optional{\, start\optional{\,end}}} -Like \code{find} but raise \code{ValueError} when the substring is -not found. +\begin{funcdesc}{index}{s, sub\optional{, start\optional{, end}}} +Like \function{find()} but raise \exception{ValueError} when the +substring is not found. \end{funcdesc} -\begin{funcdesc}{rindex}{s\, sub\optional{\, start\optional{\,end}}} -Like \code{rfind} but raise \code{ValueError} when the substring is -not found. +\begin{funcdesc}{rindex}{s, sub\optional{, start\optional{, end}}} +Like \function{rfind()} but raise \exception{ValueError} when the +substring is not found. \end{funcdesc} -\begin{funcdesc}{count}{s\, sub\optional{\, start\optional{\,end}}} +\begin{funcdesc}{count}{s, sub\optional{, start\optional{, end}}} Return the number of (non-overlapping) occurrences of substring \var{sub} in string \code{\var{s}[\var{start}:\var{end}]}. Defaults for \var{start} and \var{end} and interpretation of negative @@ -141,13 +142,13 @@ Convert letters to lower case. \end{funcdesc} \begin{funcdesc}{maketrans}{from, to} -Return a translation table suitable for passing to \code{string.translate} -or \code{regex.compile}, that will map each character in \var{from} -into the character at the same position in \var{to}; \var{from} and -\var{to} must have the same length. +Return a translation table suitable for passing to +\function{translate()} or \function{regex.compile()}, that will map +each character in \var{from} into the character at the same position +in \var{to}; \var{from} and \var{to} must have the same length. \end{funcdesc} -\begin{funcdesc}{split}{s\optional{\, sep\optional{\, maxsplit}}} +\begin{funcdesc}{split}{s\optional{, sep\optional{, maxsplit}}} Return a list of the words of the string \var{s}. If the optional second argument \var{sep} is absent or \code{None}, the words are separated by arbitrary strings of whitespace characters (space, tab, @@ -161,24 +162,24 @@ remainder of the string is returned as the final element of the list (thus, the list will have at most \code{\var{maxsplit}+1} elements). \end{funcdesc} -\begin{funcdesc}{splitfields}{s\optional{\, sep\optional{\, maxsplit}}} -This function behaves identically to \code{split}. (In the past, -\code{split} was only used with one argument, while \code{splitfields} -was only used with two arguments.) +\begin{funcdesc}{splitfields}{s\optional{, sep\optional{, maxsplit}}} +This function behaves identically to \function{split()}. (In the +past, \function{split()} was only used with one argument, while +\function{splitfields()} was only used with two arguments.) \end{funcdesc} -\begin{funcdesc}{join}{words\optional{\, sep}} +\begin{funcdesc}{join}{words\optional{, sep}} Concatenate a list or tuple of words with intervening occurrences of -\var{sep}. The default value for \var{sep} is a single space character. -It is always true that -\code{string.join(string.split(\var{s}, \var{sep}), \var{sep})} +\var{sep}. The default value for \var{sep} is a single space +character. It is always true that +\samp{string.join(string.split(\var{s}, \var{sep}), \var{sep})} equals \var{s}. \end{funcdesc} -\begin{funcdesc}{joinfields}{words\optional{\, sep}} -This function behaves identical to \code{join}. (In the past, -\code{join} was only used with one argument, while \code{joinfields} -was only used with two arguments.) +\begin{funcdesc}{joinfields}{words\optional{, sep}} +This function behaves identical to \function{join()}. (In the past, +\function{join()} was only used with one argument, while +\function{joinfields()} was only used with two arguments.) \end{funcdesc} \begin{funcdesc}{lstrip}{s} @@ -198,19 +199,19 @@ Convert lower case letters to upper case and vice versa. \end{funcdesc} \begin{funcdesc}{translate}{s, table\optional{, deletechars}} -Delete all characters from \var{s} that are in \var{deletechars} (if present), and -then translate the characters using \var{table}, which must be -a 256-character string giving the translation for each character -value, indexed by its ordinal. +Delete all characters from \var{s} that are in \var{deletechars} (if +present), and then translate the characters using \var{table}, which +must be a 256-character string giving the translation for each +character value, indexed by its ordinal. \end{funcdesc} \begin{funcdesc}{upper}{s} Convert letters to upper case. \end{funcdesc} -\begin{funcdesc}{ljust}{s\, width} -\funcline{rjust}{s\, width} -\funcline{center}{s\, width} +\begin{funcdesc}{ljust}{s, width} +\funcline{rjust}{s, width} +\funcline{center}{s, width} These functions respectively left-justify, right-justify and center a string in a field of given width. They return a string that is at least @@ -221,7 +222,7 @@ with spaces until the given width on the right, left or both sides. The string is never truncated. \end{funcdesc} -\begin{funcdesc}{zfill}{s\, width} +\begin{funcdesc}{zfill}{s, width} Pad a numeric string on the left with zero digits until the given width is reached. Strings starting with a sign are handled correctly. \end{funcdesc} @@ -234,10 +235,10 @@ replaced. \end{funcdesc} This module is implemented in Python. Much of its functionality has -been reimplemented in the built-in module \code{strop}. However, you +been reimplemented in the built-in module +\module{strop}\refbimodindex{strop}. However, you should \emph{never} import the latter module directly. When -\code{string} discovers that \code{strop} exists, it transparently -replaces parts of itself with the implementation from \code{strop}. +\module{string} discovers that \module{strop} exists, it transparently +replaces parts of itself with the implementation from \module{strop}. After initialization, there is \emph{no} overhead in using -\code{string} instead of \code{strop}. -\refbimodindex{strop} +\module{string} instead of \module{strop}. diff --git a/Doc/libstruct.tex b/Doc/libstruct.tex index d0fde4f..b92076c 100644 --- a/Doc/libstruct.tex +++ b/Doc/libstruct.tex @@ -16,14 +16,14 @@ The module defines the following exception and functions: describing what is wrong. \end{excdesc} -\begin{funcdesc}{pack}{fmt\, v1\, v2\, {\rm \ldots}} +\begin{funcdesc}{pack}{fmt, v1, v2, {\rm \ldots}} Return a string containing the values \code{\var{v1}, \var{v2}, {\rm \ldots}} packed according to the given format. The arguments must match the values required by the format exactly. \end{funcdesc} -\begin{funcdesc}{unpack}{fmt\, string} +\begin{funcdesc}{unpack}{fmt, string} Unpack the string (presumably packed by \code{pack(\var{fmt}, {\rm \ldots})}) according to the given format. The result is a tuple even if it contains exactly one item. The string must contain exactly the diff --git a/Doc/libsyslog.tex b/Doc/libsyslog.tex index 8348e9c..5d2b6a9 100644 --- a/Doc/libsyslog.tex +++ b/Doc/libsyslog.tex @@ -10,7 +10,7 @@ The module defines the following functions: \setindexsubitem{(in module syslog)} -\begin{funcdesc}{syslog}{\optional{priority\,} message} +\begin{funcdesc}{syslog}{\optional{priority,} message} Send the string \var{message} to the system logger. A trailing newline is added if necessary. Each message is tagged with a priority composed of a \var{facility} and diff --git a/Doc/libtemplate.tex b/Doc/libtemplate.tex index db07934..3fb4f51 100644 --- a/Doc/libtemplate.tex +++ b/Doc/libtemplate.tex @@ -61,7 +61,7 @@ The \module{spam} module defines the following functions: % least once in the description; each usage (even inside \code{...}) % should be enclosed in \var{...}. -\begin{funcdesc}{open}{filename\optional{\, mode\, buffersize}} +\begin{funcdesc}{open}{filename\optional{, mode, buffersize}} Open the file \var{filename} as a can of Spam. The optional \var{mode} and \var{buffersize} arguments specify the read-write mode (\code{'r'} (default) or \code{'w'}) and the buffer size (default: diff --git a/Doc/libthread.tex b/Doc/libthread.tex index 24ebac5..dabfe70 100644 --- a/Doc/libthread.tex +++ b/Doc/libthread.tex @@ -25,7 +25,7 @@ It defines the following constant and functions: Raised on thread-specific errors. \end{excdesc} -\begin{funcdesc}{start_new_thread}{func\, arg} +\begin{funcdesc}{start_new_thread}{func, arg} Start a new thread. The thread executes the function \var{func} with the argument list \var{arg} (which must be a tuple). When the function returns, the thread silently exits. When the function diff --git a/Doc/libtypes.tex b/Doc/libtypes.tex index 5c87653..70f970e 100644 --- a/Doc/libtypes.tex +++ b/Doc/libtypes.tex @@ -534,9 +534,9 @@ dictionary entry. \indexii{dictionary}{type} Dictionaries are created by placing a comma-separated list of -\code{\var{key}:\,\var{value}} pairs within braces, for example: -\code{\{'jack':\,4098, 'sjoerd':\,4127\}} or -\code{\{4098:\,'jack', 4127:\,'sjoerd'\}}. +\code{\var{key}: \var{value}} pairs within braces, for example: +\code{\{'jack': 4098, 'sjoerd': 4127\}} or +\code{\{4098: 'jack', 4127: 'sjoerd'\}}. The following operations are defined on mappings (where \var{a} is a mapping, \var{k} is a key and \var{x} is an arbitrary object): @@ -767,7 +767,7 @@ descriptors, e.g. module \code{fcntl} or \code{os.read()} and friends. internal buffer size) are read. \end{funcdesc} -\begin{funcdesc}{seek}{offset\, whence} +\begin{funcdesc}{seek}{offset, whence} Set the file's current position, like \code{stdio}'s \code{fseek()}. The \var{whence} argument is optional and defaults to \code{0} (absolute file positioning); other values are \code{1} (seek diff --git a/Doc/liburllib.tex b/Doc/liburllib.tex index 01fc875..1732d85 100644 --- a/Doc/liburllib.tex +++ b/Doc/liburllib.tex @@ -55,7 +55,7 @@ Clear the cache that may have been built up by previous calls to \function{urlretrieve()}. \end{funcdesc} -\begin{funcdesc}{quote}{string\optional{\, addsafe}} +\begin{funcdesc}{quote}{string\optional{, addsafe}} Replace special characters in \var{string} using the \samp{\%xx} escape. Letters, digits, and the characters \character{_,.-} are never quoted. The optional \var{addsafe} parameter specifies additional characters @@ -64,7 +64,7 @@ that should not be quoted --- its default value is \code{'/'}. Example: \code{quote('/\~connolly/')} yields \code{'/\%7econnolly/'}. \end{funcdesc} -\begin{funcdesc}{quote_plus}{string\optional{\, addsafe}} +\begin{funcdesc}{quote_plus}{string\optional{, addsafe}} Like \function{quote()}, but also replaces spaces by plus signs, as required for quoting HTML form values. \end{funcdesc} diff --git a/Doc/liburlparse.tex b/Doc/liburlparse.tex index 32d88ee..3017a16 100644 --- a/Doc/liburlparse.tex +++ b/Doc/liburlparse.tex @@ -61,7 +61,7 @@ URL that was parsed originally had redundant delimiters, e.g. a ? with an empty query (the draft states that these are equivalent). \end{funcdesc} -\begin{funcdesc}{urljoin}{base\, url\optional{\, allow_fragments}} +\begin{funcdesc}{urljoin}{base, url\optional{, allow_fragments}} Construct a full (``absolute'') URL by combining a ``base URL'' (\var{base}) with a ``relative URL'' (\var{url}). Informally, this uses components of the base URL, in particular the addressing scheme, diff --git a/Doc/libuu.tex b/Doc/libuu.tex index 87182dc..e953628 100644 --- a/Doc/libuu.tex +++ b/Doc/libuu.tex @@ -19,7 +19,7 @@ The \module{uu} module defines the following functions: \setindexsubitem{(in module uu)} -\begin{funcdesc}{encode}{in_file\, out_file\optional{\, name\, mode}} +\begin{funcdesc}{encode}{in_file, out_file\optional{, name, mode}} Uuencode file \var{in_file} into file \var{out_file}. The uuencoded file will have the header specifying \var{name} and \var{mode} as the defaults for the results of decoding the file. The default defaults @@ -27,7 +27,7 @@ are taken from \var{in_file}, or \code{'-'} and \code{0666} respectively. \end{funcdesc} -\begin{funcdesc}{decode}{in_file\optional{\, out_file\, mode}} +\begin{funcdesc}{decode}{in_file\optional{, out_file, mode}} This call decodes uuencoded file \var{in_file} placing the result on file \var{out_file}. If \var{out_file} is a pathname the \var{mode} is also set. Defaults for \var{out_file} and \var{mode} are taken from diff --git a/Doc/libwhrandom.tex b/Doc/libwhrandom.tex index cac7de7..7803184 100644 --- a/Doc/libwhrandom.tex +++ b/Doc/libwhrandom.tex @@ -11,7 +11,7 @@ class that is also named \code{whrandom}. Instances of the Chooses a random element from the non-empty sequence \var{seq} and returns it. \end{funcdesc} -\begin{funcdesc}{randint}{a\, b} +\begin{funcdesc}{randint}{a, b} Returns a random integer \var{N} such that \code{\var{a}<=\var{N}<=\var{b}}. \end{funcdesc} @@ -19,7 +19,7 @@ Returns a random integer \var{N} such that \code{\var{a}<=\var{N}<=\var{b}}. Returns the next random floating point number in the range [0.0 ... 1.0). \end{funcdesc} -\begin{funcdesc}{seed}{x\, y\, z} +\begin{funcdesc}{seed}{x, y, z} Initializes the random number generator from the integers \var{x}, \var{y} @@ -29,7 +29,7 @@ When the module is first imported, the random number is initialized using values derived from the current time. \end{funcdesc} -\begin{funcdesc}{uniform}{a\, b} +\begin{funcdesc}{uniform}{a, b} Returns a random real number \var{N} such that \code{\var{a}<=\var{N}<\var{b}}. \end{funcdesc} diff --git a/Doc/libxdrlib.tex b/Doc/libxdrlib.tex index 221a578..62e9df7 100644 --- a/Doc/libxdrlib.tex +++ b/Doc/libxdrlib.tex @@ -96,7 +96,7 @@ the individual item. At the end of the list, an unsigned integer \code{0} is packed. \end{funcdesc} -\begin{funcdesc}{pack_farray}{n\, array\, pack_item} +\begin{funcdesc}{pack_farray}{n, array, pack_item} Packs a fixed length list (\var{array}) of homogeneous items. \var{n} is the length of the list; it is \emph{not} packed into the buffer, but a \exception{ValueError} exception is raised if @@ -104,7 +104,7 @@ but a \exception{ValueError} exception is raised if \var{pack_item} is the function used to pack each element. \end{funcdesc} -\begin{funcdesc}{pack_array}{list\, pack_item} +\begin{funcdesc}{pack_array}{list, pack_item} Packs a variable length \var{list} of homogeneous items. First, the length of the list is packed as an unsigned integer, then each element is packed as in \method{pack_farray()} above. @@ -192,7 +192,7 @@ then the item is unpacked and appended to the list. A flag of function that is called to unpack the items. \end{funcdesc} -\begin{funcdesc}{unpack_farray}{n\, unpack_item} +\begin{funcdesc}{unpack_farray}{n, unpack_item} Unpacks and returns (as a list) a fixed length array of homogeneous items. \var{n} is number of list elements to expect in the buffer. As above, \var{unpack_item} is the function used to unpack each element. diff --git a/Doc/libxmllib.tex b/Doc/libxmllib.tex index ba9e006..efc7f00 100644 --- a/Doc/libxmllib.tex +++ b/Doc/libxmllib.tex @@ -78,7 +78,7 @@ The base implementation simply calls \var{method} with \var{attributes} as the only argument. \end{funcdesc} -\begin{funcdesc}{handle_endtag}{tag\, method} +\begin{funcdesc}{handle_endtag}{tag, method} This method is called to handle endtags for which an \code{end_\var{tag}()} method has been defined. The \var{tag} argument is the name of the tag, and the @@ -170,7 +170,7 @@ raise a \exception{RuntimeError} without first calling \method{syntax_error()}. \end{funcdesc} -\begin{funcdesc}{unknown_starttag}{tag\, attributes} +\begin{funcdesc}{unknown_starttag}{tag, attributes} This method is called to process an unknown start tag. It is intended to be overridden by a derived class; the base class implementation does nothing. diff --git a/Doc/libzlib.tex b/Doc/libzlib.tex index 9234c5f..c4ad987 100644 --- a/Doc/libzlib.tex +++ b/Doc/libzlib.tex @@ -14,7 +14,7 @@ later version if one is available. The available functions in this module are: \setindexsubitem{(in module zlib)} -\begin{funcdesc}{adler32}{string\optional{\, value}} +\begin{funcdesc}{adler32}{string\optional{, value}} Computes a Adler-32 checksum of \var{string}. (An Adler-32 checksum is almost as reliable as a CRC32 but can be computed much more quickly.) If \var{value} is present, it is used as the @@ -25,7 +25,7 @@ The available functions in this module are: authentication or digital signatures. \end{funcdesc} -\begin{funcdesc}{compress}{string\optional{\, level}} +\begin{funcdesc}{compress}{string\optional{, level}} Compresses the data in \var{string}, returning a string contained compressed data. \var{level} is an integer from \code{1} to \code{9} controlling the level of compression; \code{1} is fastest and produces @@ -42,7 +42,7 @@ exception if any error occurs. produces the most. The default value is \code{6}. \end{funcdesc} -\begin{funcdesc}{crc32}{string\optional{\, value}} +\begin{funcdesc}{crc32}{string\optional{, value}} Computes a CRC (Cyclic Redundancy Check) sum of \var{string}. If \var{value} is present, it is used as the starting value of the checksum; otherwise, a fixed default value is used. This allows diff --git a/Doc/mac/libctb.tex b/Doc/mac/libctb.tex index 36d1289..cd8c72c 100644 --- a/Doc/mac/libctb.tex +++ b/Doc/mac/libctb.tex @@ -34,7 +34,7 @@ Bits in the status as returned by \var{Status}. Return 1 if the communication toolbox is available, zero otherwise. \end{funcdesc} -\begin{funcdesc}{CMNew}{name\, sizes} +\begin{funcdesc}{CMNew}{name, sizes} Create a connection object using the connection tool named \var{name}. \var{sizes} is a 6-tuple given buffer sizes for data in, data out, control in, control out, attention in and attention out. @@ -77,21 +77,21 @@ Accept (when \var{yesno} is non-zero) or reject an incoming call after \var{Listen} returned. \end{funcdesc} -\begin{funcdesc}{Close}{timeout\, now} +\begin{funcdesc}{Close}{timeout, now} Close a connection. When \var{now} is zero, the close is orderly (i.e.\ outstanding output is flushed, etc.)\ with a timeout of \var{timeout} seconds. When \var{now} is non-zero the close is immediate, discarding output. \end{funcdesc} -\begin{funcdesc}{Read}{len\, chan\, timeout} +\begin{funcdesc}{Read}{len, chan, timeout} Read \var{len} bytes, or until \var{timeout} seconds have passed, from the channel \var{chan} (which is one of \var{cmData}, \var{cmCntl} or \var{cmAttn}). Return a 2-tuple:\ the data read and the end-of-message flag. \end{funcdesc} -\begin{funcdesc}{Write}{buf\, chan\, timeout\, eom} +\begin{funcdesc}{Write}{buf, chan, timeout, eom} Write \var{buf} to channel \var{chan}, aborting after \var{timeout} seconds. When \var{eom} has the value \var{cmFlagsEOM} an end-of-message indicator will be written after the data (if this diff --git a/Doc/mac/libframework.tex b/Doc/mac/libframework.tex index 012b8c5..6b8c5fa 100644 --- a/Doc/mac/libframework.tex +++ b/Doc/mac/libframework.tex @@ -31,14 +31,14 @@ An object representing the menubar. This object is usually not created by the user. \end{funcdesc} -\begin{funcdesc}{Menu}{bar\, title\optional{\, after}} +\begin{funcdesc}{Menu}{bar, title\optional{, after}} An object representing a menu. Upon creation you pass the \code{MenuBar} the menu appears in, the \var{title} string and a position (1-based) \var{after} where the menu should appear (default: at the end). \end{funcdesc} -\begin{funcdesc}{MenuItem}{menu\, title\optional{\, shortcut\, callback}} +\begin{funcdesc}{MenuItem}{menu, title\optional{, shortcut, callback}} Create a menu item object. The arguments are the menu to crate the item it, the item title string and optionally the keyboard shortcut and a callback routine. The callback is called with the arguments @@ -58,7 +58,7 @@ correct dimming for all menu items based on the current front window. Add a separator to the end of a menu. \end{funcdesc} -\begin{funcdesc}{SubMenu}{menu\, label} +\begin{funcdesc}{SubMenu}{menu, label} Create a submenu named \var{label} under menu \var{menu}. The menu object is returned. \end{funcdesc} @@ -72,7 +72,7 @@ which the window belongs. The window is not displayed until later. Creates a modeless dialog window. \end{funcdesc} -\begin{funcdesc}{windowbounds}{width\, height} +\begin{funcdesc}{windowbounds}{width, height} Return a \code{(left, top, right, bottom)} tuple suitable for creation of a window of given width and height. The window will be staggered with respect to previous windows, and an attempt is made to keep the @@ -104,7 +104,7 @@ application. Alternatively, override the \code{do_about} method for more elaborate about messages. \end{funcdesc} -\begin{funcdesc}{mainloop}{\optional{mask\, wait}} +\begin{funcdesc}{mainloop}{\optional{mask, wait}} This routine is the main event loop, call it to set your application rolling. \var{Mask} is the mask of events you want to handle, \var{wait} is the number of ticks you want to leave to other @@ -145,7 +145,7 @@ The old on/off value is returned. Terminate the event \code{mainloop} at the next convenient moment. \end{funcdesc} -\begin{funcdesc}{do_char}{c\, event} +\begin{funcdesc}{do_char}{c, event} The user typed character \var{c}. The complete details of the event can be found in the \var{event} structure. This method can also be provided in a \code{Window} object, which overrides the @@ -181,22 +181,22 @@ Override this method to do any special processing on window close. Call \code{self.do_postclose} to cleanup the parent state. \end{funcdesc} -\begin{funcdesc}{do_postresize}{width\, height\, macoswindowid} +\begin{funcdesc}{do_postresize}{width, height, macoswindowid} Called after the window is resized. Override if more needs to be done than calling \code{InvalRect}. \end{funcdesc} -\begin{funcdesc}{do_contentclick}{local\, modifiers\, event} +\begin{funcdesc}{do_contentclick}{local, modifiers, event} The user clicked in the content part of a window. The arguments are the coordinates (window-relative), the key modifiers and the raw event. \end{funcdesc} -\begin{funcdesc}{do_update}{macoswindowid\, event} +\begin{funcdesc}{do_update}{macoswindowid, event} An update event for the window was received. Redraw the window. \end{funcdesc} -\begin{funcdesc}{do_activate}{activate\, event} +\begin{funcdesc}{do_activate}{activate, event} The window was activated (\code{activate==1}) or deactivated (\code{activate==0}). Handle things like focus highlighting, etc. \end{funcdesc} @@ -208,7 +208,7 @@ ControlsWindow objects have the following methods besides those of \setindexsubitem{(ControlsWindow method)} -\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event} +\begin{funcdesc}{do_controlhit}{window, control, pcode, event} Part \code{pcode} of control \code{control} was hit by the user. Tracking and such has already been taken care of. \end{funcdesc} @@ -220,7 +220,7 @@ extra methods: \setindexsubitem{(ScrolledWindow method)} -\begin{funcdesc}{scrollbars}{\optional{wantx\, wanty}} +\begin{funcdesc}{scrollbars}{\optional{wantx, wanty}} Create (or destroy) horizontal and vertical scrollbars. The arguments specify which you want (default: both). The scrollbars always have minimum \code{0} and maximum \code{32767}. @@ -238,32 +238,32 @@ Call this method when the document has changed. It will call \code{getscrollbarvalues} and update the scrollbars. \end{funcdesc} -\begin{funcdesc}{scrollbar_callback}{which\, what\, value} +\begin{funcdesc}{scrollbar_callback}{which, what, value} Supplied by you and called after user interaction. \code{Which} will be \code{'x'} or \code{'y'}, \code{what} will be \code{'-'}, \code{'--'}, \code{'set'}, \code{'++'} or \code{'+'}. For \code{'set'}, \code{value} will contain the new scrollbar position. \end{funcdesc} -\begin{funcdesc}{scalebarvalues}{absmin\, absmax\, curmin\, curmax} +\begin{funcdesc}{scalebarvalues}{absmin, absmax, curmin, curmax} Auxiliary method to help you calculate values to return from \code{getscrollbarvalues}. You pass document minimum and maximum value and topmost (leftmost) and bottommost (rightmost) visible values and it returns the correct number or \code{None}. \end{funcdesc} -\begin{funcdesc}{do_activate}{onoff\, event} +\begin{funcdesc}{do_activate}{onoff, event} Takes care of dimming/highlighting scrollbars when a window becomes frontmost vv. If you override this method call this one at the end of your method. \end{funcdesc} -\begin{funcdesc}{do_postresize}{width\, height\, window} +\begin{funcdesc}{do_postresize}{width, height, window} Moves scrollbars to the correct position. Call this method initially if you override it. \end{funcdesc} -\begin{funcdesc}{do_controlhit}{window\, control\, pcode\, event} +\begin{funcdesc}{do_controlhit}{window, control, pcode, event} Handles scrollbar interaction. If you override it call this method first, a nonzero return value indicates the hit was in the scrollbars and has been handled. @@ -281,7 +281,7 @@ Create the dialog window, from the DLOG resource with id \var{resid}. The dialog object is stored in \code{self.wid}. \end{funcdesc} -\begin{funcdesc}{do_itemhit}{item\, event} +\begin{funcdesc}{do_itemhit}{item, event} Item number \var{item} was hit. You are responsible for redrawing toggle buttons, etc. \end{funcdesc} diff --git a/Doc/mac/libmacconsole.tex b/Doc/mac/libmacconsole.tex index bd601b9..1916025 100644 --- a/Doc/mac/libmacconsole.tex +++ b/Doc/mac/libmacconsole.tex @@ -95,7 +95,7 @@ displayed in inverse video (this disables the upper half of a non-\ASCII{} character set). \end{funcdesc} -\begin{funcdesc}{gotoxy}{x\, y} +\begin{funcdesc}{gotoxy}{x, y} Set the cursor to position \code{(\var{x}, \var{y})}. \end{funcdesc} diff --git a/Doc/mac/libmacfs.tex b/Doc/mac/libmacfs.tex index 647e004..5373d31 100644 --- a/Doc/mac/libmacfs.tex +++ b/Doc/mac/libmacfs.tex @@ -2,16 +2,16 @@ \label{module-macfs} \bimodindex{macfs} -\setindexsubitem{(in module macfs)} -This module provides access to macintosh FSSpec handling, the Alias +This module provides access to Macintosh FSSpec handling, the Alias Manager, finder aliases and the Standard File package. Whenever a function or method expects a \var{file} argument, this argument can be one of three things:\ (1) a full or partial Macintosh -pathname, (2) an FSSpec object or (3) a 3-tuple \code{(wdRefNum, -parID, name)} as described in Inside Mac VI\@. A description of aliases -and the standard file package can also be found there. +pathname, (2) an FSSpec object or (3) a 3-tuple \code{(\var{wdRefNum}, +\var{parID}, \var{name})} as described in \emph{Inside Macintosh +VI}\@. A description of aliases and the standard file package can also +be found there. \begin{funcdesc}{FSSpec}{file} Create an FSSpec object for the specified file. @@ -41,7 +41,7 @@ Resolve an alias file. Returns a 3-tuple \code{(\var{fsspec}, \var{isfolder}, (otherwise the FSSpec object for the file itself is returned). \end{funcdesc} -\begin{funcdesc}{StandardGetFile}{\optional{type\, ...}} +\begin{funcdesc}{StandardGetFile}{\optional{type, ...}} Present the user with a standard ``open input file'' dialog. Optionally, you can pass up to four 4-char file types to limit the files the user can choose from. The function returns an FSSpec @@ -49,11 +49,11 @@ object and a flag indicating that the user completed the dialog without cancelling. \end{funcdesc} -\begin{funcdesc}{PromptGetFile}{prompt\optional{\, type\, ...}} +\begin{funcdesc}{PromptGetFile}{prompt\optional{, type, ...}} Similar to \var{StandardGetFile} but allows you to specify a prompt. \end{funcdesc} -\begin{funcdesc}{StandardPutFile}{prompt\, \optional{default}} +\begin{funcdesc}{StandardPutFile}{prompt, \optional{default}} Present the user with a standard ``open output file'' dialog. \var{prompt} is the prompt string, and the optional \var{default} argument initializes the output file name. The function @@ -79,7 +79,7 @@ behaviour with the ``general controls'' controlpanel, thereby making this call inoperative. \end{funcdesc} -\begin{funcdesc}{FindFolder}{where\, which\, create} +\begin{funcdesc}{FindFolder}{where, which, create} Locates one of the ``special'' folders that MacOS knows about, such as the trash or the Preferences folder. \var{Where} is the disk to search, \var{which} is the 4-char string specifying which folder to @@ -133,7 +133,7 @@ Create a minimal alias pointing to this file. Return the 4-char creator and type of the file. \end{funcdesc} -\begin{funcdesc}{SetCreatorType}{creator\, type} +\begin{funcdesc}{SetCreatorType}{creator, type} Set the 4-char creator and type of the file. \end{funcdesc} @@ -151,7 +151,7 @@ Return a tuple with three floating point values representing the creation date, modification date and backup date of the file. \end{funcdesc} -\begin{funcdesc}{SetDates}{crdate\, moddate\, backupdate} +\begin{funcdesc}{SetDates}{crdate, moddate, backupdate} Set the creation, modification and backup date of the file. The values are in the standard floating point format used for times throughout Python. @@ -179,7 +179,7 @@ is returned. An interface to the C routine \code{GetAliasInfo()}. \end{funcdesc} -\begin{funcdesc}{Update}{file\, \optional{file2}} +\begin{funcdesc}{Update}{file, \optional{file2}} Update the alias to point to the \var{file} given. If \var{file2} is present a relative alias will be created. \end{funcdesc} diff --git a/Doc/mac/libmacostools.tex b/Doc/mac/libmacostools.tex index 1553b11..c4c5842 100644 --- a/Doc/mac/libmacostools.tex +++ b/Doc/mac/libmacostools.tex @@ -9,7 +9,7 @@ The \code{macostools} module defines the following functions: \setindexsubitem{(in module macostools)} -\begin{funcdesc}{copy}{src\, dst\optional{\, createpath, copytimes}} +\begin{funcdesc}{copy}{src, dst\optional{, createpath, copytimes}} Copy file \var{src} to \var{dst}. The files can be specified as pathnames or \code{FSSpec} objects. If \var{createpath} is non-zero \var{dst} must be a pathname and the folders leading to the @@ -22,13 +22,13 @@ If the source is an alias the original to which the alias points is copied, not the aliasfile. \end{funcdesc} -\begin{funcdesc}{copytree}{src\, dst} +\begin{funcdesc}{copytree}{src, dst} Recursively copy a file tree from \var{src} to \var{dst}, creating folders as needed. \var{Src} and \var{dst} should be specified as pathnames. \end{funcdesc} -\begin{funcdesc}{mkalias}{src\, dst} +\begin{funcdesc}{mkalias}{src, dst} Create a finder alias \var{dst} pointing to \var{src}. Both may be specified as pathnames or \var{FSSpec} objects. \end{funcdesc} diff --git a/Doc/mac/libmactcp.tex b/Doc/mac/libmactcp.tex index f041280..122aa5b 100644 --- a/Doc/mac/libmactcp.tex +++ b/Doc/mac/libmactcp.tex @@ -78,13 +78,13 @@ Return the TCP address of this side of a connection as a 2-tuple \code{(host, port)}, both integers. \end{funcdesc} -\begin{funcdesc}{ActiveOpen}{lport\, host\, rport} +\begin{funcdesc}{ActiveOpen}{lport, host, rport} Open an outgoing connection to TCP address \code{(\var{host}, \var{rport})}. Use local port \var{lport} (zero makes the system pick a free port). This call blocks until the connection has been established. \end{funcdesc} -\begin{funcdesc}{Send}{buf\, push\, urgent} +\begin{funcdesc}{Send}{buf, push, urgent} Send data \var{buf} over the connection. \var{Push} and \var{urgent} are flags as specified by the TCP standard. \end{funcdesc} @@ -168,7 +168,7 @@ Read a datagram, waiting at most \var{timeout} seconds (-1 is infinite). Return the data. \end{funcdesc} -\begin{funcdesc}{Write}{host\, port\, buf} +\begin{funcdesc}{Write}{host, port, buf} Send \var{buf} as a datagram to IP-address \var{host}, port \var{port}. \end{funcdesc} diff --git a/Doc/mac/libmacui.tex b/Doc/mac/libmacui.tex index 546065f..bf8a30f 100644 --- a/Doc/mac/libmacui.tex +++ b/Doc/mac/libmacui.tex @@ -18,7 +18,7 @@ most 255 characters long, is displayed. Control is returned when the user clicks ``OK''. \end{funcdesc} -\begin{funcdesc}{AskString}{prompt\optional{\, default}} +\begin{funcdesc}{AskString}{prompt\optional{, default}} Ask the user to input a string value, in a modal dialog. \var{Prompt} is the promt message, the optional \var{default} arg is the initial value for the string. All strings can be at most 255 bytes @@ -26,7 +26,7 @@ long. \var{AskString} returns the string entered or \code{None} in case the user cancelled. \end{funcdesc} -\begin{funcdesc}{AskYesNoCancel}{question\optional{\, default}} +\begin{funcdesc}{AskYesNoCancel}{question\optional{, default}} Present a dialog with text \var{question} and three buttons labelled ``yes'', ``no'' and ``cancel''. Return \code{1} for yes, \code{0} for no and \code{-1} for cancel. The default return value chosen by @@ -34,7 +34,7 @@ hitting return is \code{0}. This can be changed with the optional \var{default} argument. \end{funcdesc} -\begin{funcdesc}{ProgressBar}{\optional{label\, maxval}} +\begin{funcdesc}{ProgressBar}{\optional{label, maxval}} Display a modeless progress dialog with a thermometer bar. \var{Label} is the textstring displayed (default ``Working...''), \var{maxval} is the value at which progress is complete (default 100). The returned diff --git a/Doc/mac/libminiae.tex b/Doc/mac/libminiae.tex index 00666fa..d898551 100644 --- a/Doc/mac/libminiae.tex +++ b/Doc/mac/libminiae.tex @@ -36,14 +36,14 @@ provide its own windows, etc. \setindexsubitem{(AEServer method)} -\begin{funcdesc}{installaehandler}{classe\, type\, callback} +\begin{funcdesc}{installaehandler}{classe, type, callback} Installs an AppleEvent handler. \code{Classe} and \code{type} are the four-char OSA Class and Type designators, \code{'****'} wildcards are allowed. When a matching AppleEvent is received the parameters are decoded and your callback is invoked. \end{funcdesc} -\begin{funcdesc}{callback}{_object\, **kwargs} +\begin{funcdesc}{callback}{_object, **kwargs} Your callback is called with the OSA Direct Object as first positional parameter. The other parameters are passed as keyword arguments, with the 4-char designator as name. Three extra keyword parameters are diff --git a/Doc/templates/module.tex b/Doc/templates/module.tex index db07934..3fb4f51 100644 --- a/Doc/templates/module.tex +++ b/Doc/templates/module.tex @@ -61,7 +61,7 @@ The \module{spam} module defines the following functions: % least once in the description; each usage (even inside \code{...}) % should be enclosed in \var{...}. -\begin{funcdesc}{open}{filename\optional{\, mode\, buffersize}} +\begin{funcdesc}{open}{filename\optional{, mode, buffersize}} Open the file \var{filename} as a can of Spam. The optional \var{mode} and \var{buffersize} arguments specify the read-write mode (\code{'r'} (default) or \code{'w'}) and the buffer size (default: -- cgit v0.12