From 64958d593c270db8aba3574eb792af1416747cb7 Mon Sep 17 00:00:00 2001
From: Fred Drake <fdrake@acm.org>
Date: Wed, 6 May 1998 21:54:44 +0000
Subject: Relocating file to Doc/mac.

---
 Doc/libctb.tex        | 151 ---------------------------------
 Doc/libmac.tex        | 151 ---------------------------------
 Doc/libmacconsole.tex | 111 -------------------------
 Doc/libmacdnr.tex     | 120 ---------------------------
 Doc/libmacfs.tex      | 225 --------------------------------------------------
 Doc/libmacic.tex      | 124 ----------------------------
 Doc/libmacos.tex      |  95 ---------------------
 Doc/libmacostools.tex |  99 ----------------------
 Doc/libmacspeech.tex  |  93 ---------------------
 Doc/libmactcp.tex     | 178 ---------------------------------------
 Doc/libmacui.tex      |  54 ------------
 Doc/mac.tex           |  67 ---------------
 12 files changed, 1468 deletions(-)
 delete mode 100644 Doc/libctb.tex
 delete mode 100644 Doc/libmac.tex
 delete mode 100644 Doc/libmacconsole.tex
 delete mode 100644 Doc/libmacdnr.tex
 delete mode 100644 Doc/libmacfs.tex
 delete mode 100644 Doc/libmacic.tex
 delete mode 100644 Doc/libmacos.tex
 delete mode 100644 Doc/libmacostools.tex
 delete mode 100644 Doc/libmacspeech.tex
 delete mode 100644 Doc/libmactcp.tex
 delete mode 100644 Doc/libmacui.tex
 delete mode 100644 Doc/mac.tex

diff --git a/Doc/libctb.tex b/Doc/libctb.tex
deleted file mode 100644
index d7302be..0000000
--- a/Doc/libctb.tex
+++ /dev/null
@@ -1,151 +0,0 @@
-\section{Built-in Module \module{ctb}}
-\label{module-ctb}
-\bimodindex{ctb}
-
-This module provides a partial interface to the Macintosh
-Communications Toolbox. Currently, only Connection Manager tools are
-supported.  It may not be available in all Mac Python versions.
-\index{Communications Toolbox, Macintosh}
-\index{Macintosh Communications Toolbox}
-\index{Connection Manager}
-
-\begin{datadesc}{error}
-The exception raised on errors.
-\end{datadesc}
-
-\begin{datadesc}{cmData}
-\dataline{cmCntl}
-\dataline{cmAttn}
-Flags for the \var{channel} argument of the \method{Read()} and
-\method{Write()} methods.
-\end{datadesc}
-
-\begin{datadesc}{cmFlagsEOM}
-End-of-message flag for \method{Read()} and \method{Write()}.
-\end{datadesc}
-
-\begin{datadesc}{choose*}
-Values returned by \method{Choose()}.
-\end{datadesc}
-
-\begin{datadesc}{cmStatus*}
-Bits in the status as returned by \method{Status()}.
-\end{datadesc}
-
-\begin{funcdesc}{available}{}
-Return \code{1} if the Communication Toolbox is available, zero otherwise.
-\end{funcdesc}
-
-\begin{funcdesc}{CMNew}{name, sizes}
-Create a connection object using the connection tool named
-\var{name}. \var{sizes} is a 6-tuple given buffer sizes for data in,
-data out, control in, control out, attention in and attention out.
-Alternatively, passing \code{None} for \var{sizes} will result in
-default buffer sizes.
-\end{funcdesc}
-
-\subsection{connection object}
-\label{connection-object}
-
-For all connection methods that take a \var{timeout} argument, a value
-of \code{-1} is indefinite, meaning that the command runs to completion.
-
-\begin{memberdesc}[connection]{callback}
-If this member is set to a value other than \code{None} it should point
-to a function accepting a single argument (the connection
-object). This will make all connection object methods work
-asynchronously, with the callback routine being called upon
-completion.
-
-\emph{Note:} for reasons beyond my understanding the callback routine
-is currently never called. You are advised against using asynchronous
-calls for the time being.
-\end{memberdesc}
-
-
-\begin{methoddesc}[connection]{Open}{timeout}
-Open an outgoing connection, waiting at most \var{timeout} seconds for
-the connection to be established.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{Listen}{timeout}
-Wait for an incoming connection. Stop waiting after \var{timeout}
-seconds. This call is only meaningful to some tools.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{accept}{yesno}
-Accept (when \var{yesno} is non-zero) or reject an incoming call after
-\method{Listen()} returned.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{Close}{timeout, now}
-Close a connection. When \var{now} is zero, the close is orderly
-(i.e.\ outstanding output is flushed, etc.)\ with a timeout of
-\var{timeout} seconds. When \var{now} is non-zero the close is
-immediate, discarding output.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{Read}{len, chan, timeout}
-Read \var{len} bytes, or until \var{timeout} seconds have passed, from 
-the channel \var{chan} (which is one of \constant{cmData},
-\constant{cmCntl} or \constant{cmAttn}). Return a 2-tuple:\ the data
-read and the end-of-message flag, \constant{cmFlagsEOM}.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{Write}{buf, chan, timeout, eom}
-Write \var{buf} to channel \var{chan}, aborting after \var{timeout}
-seconds. When \var{eom} has the value \constant{cmFlagsEOM}, an
-end-of-message indicator will be written after the data (if this
-concept has a meaning for this communication tool). The method returns
-the number of bytes written.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{Status}{}
-Return connection status as the 2-tuple \code{(\var{sizes},
-\var{flags})}. \var{sizes} is a 6-tuple giving the actual buffer sizes used
-(see \function{CMNew()}), \var{flags} is a set of bits describing the state
-of the connection.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{GetConfig}{}
-Return the configuration string of the communication tool. These
-configuration strings are tool-dependent, but usually easily parsed
-and modified.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{SetConfig}{str}
-Set the configuration string for the tool. The strings are parsed
-left-to-right, with later values taking precedence. This means
-individual configuration parameters can be modified by simply appending
-something like \code{'baud 4800'} to the end of the string returned by
-\method{GetConfig()} and passing that to this method. The method returns
-the number of characters actually parsed by the tool before it
-encountered an error (or completed successfully).
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{Choose}{}
-Present the user with a dialog to choose a communication tool and
-configure it. If there is an outstanding connection some choices (like
-selecting a different tool) may cause the connection to be
-aborted. The return value (one of the \constant{choose*} constants) will
-indicate this.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{Idle}{}
-Give the tool a chance to use the processor. You should call this
-method regularly.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{Abort}{}
-Abort an outstanding asynchronous \method{Open()} or \method{Listen()}.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{Reset}{}
-Reset a connection. Exact meaning depends on the tool.
-\end{methoddesc}
-
-\begin{methoddesc}[connection]{Break}{length}
-Send a break. Whether this means anything, what it means and
-interpretation of the \var{length} parameter depends on the tool in
-use.
-\end{methoddesc}
diff --git a/Doc/libmac.tex b/Doc/libmac.tex
deleted file mode 100644
index 284c09c..0000000
--- a/Doc/libmac.tex
+++ /dev/null
@@ -1,151 +0,0 @@
-\section{Introduction}
-\label{intro}
-
-The modules in this manual are available on the Apple Macintosh only.
-
-Aside from the modules described here there are also interfaces to
-various MacOS toolboxes, which are currently not extensively
-described. The toolboxes for which modules exist are:
-\module{AE} (Apple Events),
-\module{Cm} (Component Manager),
-\module{Ctl} (Control Manager),
-\module{Dlg} (Dialog Manager),
-\module{Evt} (Event Manager),
-\module{Fm} (Font Manager),
-\module{List} (List Manager),
-\module{Menu} (Moenu Manager),
-\module{Qd} (QuickDraw),
-\module{Qt} (QuickTime),
-\module{Res} (Resource Manager and Handles),
-\module{Scrap} (Scrap Manager),
-\module{Snd} (Sound Manager),
-\module{TE} (TextEdit),
-\module{Waste} (non-Apple \program{TextEdit} replacement) and
-\module{Win} (Window Manager).
-
-If applicable the module will define a number of Python objects for
-the various structures declared by the toolbox, and operations will be
-implemented as methods of the object. Other operations will be
-implemented as functions in the module. Not all operations possible in
-\C{} will also be possible in Python (callbacks are often a problem), and
-parameters will occasionally be different in Python (input and output
-buffers, especially). All methods and functions have a \code{__doc__}
-string describing their arguments and return values, and for
-additional description you are referred to \emph{Inside Macintosh} or
-similar works.
-
-The following modules are documented here:
-
-\begin{description}
-
-\item[mac]
---- Similar interfaces to the \module{posix} module.
-
-\item[macpath]
---- Path manipulation functions; use via \code{os.path}.
-
-\item[ctb]
---- Interfaces to the Communications Tool Box.  Only the Connection
-Manager is currently supported.
-
-\item[macconsole]
---- Think C's console package is available using this module.
-
-\item[macdnr]
---- Interfaces to the Macintosh Domain Name Resolver.
-
-\item[macfs]
---- Support for FSSpec, the Alias Manager, \program{finder} aliases,
-and the Standard File package.
-
-\item[macic]
---- Internet Config.
-
-\item[MacOS]
---- Access to MacOS specific interpreter features.
-
-\item[macostools]
---- Convenience routines for file manipulation.
-
-\item[findertools]
---- Wrappers around the \program{finder}'s Apple Events interface.
-
-\item[mactcp]
---- The MacTCP interfaces.
-
-\item[macspeech]
---- Interface to the Macintosh Speech Manager.
-
-\item[EasyDialogs]
---- Basic Macintosh dialogs.
-
-\item[FrameWork]
---- Interactive application framework.
-
-\item[MiniAEFrame]
---- Support to act as an Open Scripting Architecture (OSA) server
-(``Apple Events'').
-
-\end{description}
-
-
-\section{Built-in Module \module{mac}}
-\label{module-mac}
-\bimodindex{mac}
-
-This module provides a subset of the operating system dependent
-functionality provided by the optional built-in module \module{posix}.
-It is best accessed through the more portable standard module
-\module{os}.
-\refbimodindex{posix}
-\refstmodindex{os}
-
-The following functions are available in this module:
-\function{chdir()},
-\function{close()},
-\function{dup()},
-\function{fdopen()},
-\function{getcwd()},
-\function{lseek()},
-\function{listdir()},
-\function{mkdir()},
-\function{open()},
-\function{read()},
-\function{rename()},
-\function{rmdir()},
-\function{stat()},
-\function{sync()},
-\function{unlink()},
-\function{write()},
-as well as the exception \exception{error}. Note that the times
-returned by \function{stat()} are floating-point values, like all time
-values in MacPython.
-
-One additional function is available: \function{xstat()}. This function
-returns the same information as \function{stat()}, but with three extra
-values appended: the size of the resource fork of the file and its
-4-character creator and type.
-
-\section{Standard Module \module{macpath}}
-\label{module-macpath}
-\stmodindex{macpath}
-
-This module provides a subset of the pathname manipulation functions
-available from the optional standard module \module{posixpath}.  It is
-best accessed through the more portable standard module \module{os}, as
-\code{os.path}.
-\refstmodindex{posixpath}
-\refstmodindex{os}
-
-The following functions are available in this module:
-\function{normcase()},
-\function{normpath()},
-\function{isabs()},
-\function{join()},
-\function{split()},
-\function{isdir()},
-\function{isfile()},
-\function{walk()},
-\function{exists()}.
-For other functions available in \module{posixpath} dummy counterparts
-are available.
diff --git a/Doc/libmacconsole.tex b/Doc/libmacconsole.tex
deleted file mode 100644
index 0d1f350..0000000
--- a/Doc/libmacconsole.tex
+++ /dev/null
@@ -1,111 +0,0 @@
-\section{Built-in Module \module{macconsole}}
-\label{module-macconsole}
-\bimodindex{macconsole}
-
-
-This module is available on the Macintosh, provided Python has been
-built using the Think \C{} compiler. It provides an interface to the
-Think console package, with which basic text windows can be created.
-
-\begin{datadesc}{options}
-An object allowing you to set various options when creating windows,
-see below.
-\end{datadesc}
-
-\begin{datadesc}{C_ECHO}
-\dataline{C_NOECHO}
-\dataline{C_CBREAK}
-\dataline{C_RAW}
-Options for the \code{setmode} method. \constant{C_ECHO} and
-\constant{C_CBREAK} enable character echo, the other two disable it,
-\constant{C_ECHO} and \constant{C_NOECHO} enable line-oriented input
-(erase/kill processing, etc).
-\end{datadesc}
-
-\begin{funcdesc}{copen}{}
-Open a new console window. Return a console window object.
-\end{funcdesc}
-
-\begin{funcdesc}{fopen}{fp}
-Return the console window object corresponding with the given file
-object. \var{fp} should be one of \code{sys.stdin}, \code{sys.stdout} or
-\code{sys.stderr}.
-\end{funcdesc}
-
-\subsection{macconsole options object}
-These options are examined when a window is created:
-
-\setindexsubitem{(macconsole option)}
-\begin{datadesc}{top}
-\dataline{left}
-The origin of the window.
-\end{datadesc}
-
-\begin{datadesc}{nrows}
-\dataline{ncols}
-The size of the window.
-\end{datadesc}
-
-\begin{datadesc}{txFont}
-\dataline{txSize}
-\dataline{txStyle}
-The font, fontsize and fontstyle to be used in the window.
-\end{datadesc}
-
-\begin{datadesc}{title}
-The title of the window.
-\end{datadesc}
-
-\begin{datadesc}{pause_atexit}
-If set non-zero, the window will wait for user action before closing.
-\end{datadesc}
-
-\subsection{console window object}
-
-\setindexsubitem{(console window attribute)}
-
-\begin{datadesc}{file}
-The file object corresponding to this console window. If the file is
-buffered, you should call \code{\var{file}.flush()} between
-\code{write()} and \code{read()} calls.
-\end{datadesc}
-
-\setindexsubitem{(console window method)}
-
-\begin{funcdesc}{setmode}{mode}
-Set the input mode of the console to \constant{C_ECHO}, etc.
-\end{funcdesc}
-
-\begin{funcdesc}{settabs}{n}
-Set the tabsize to \var{n} spaces.
-\end{funcdesc}
-
-\begin{funcdesc}{cleos}{}
-Clear to end-of-screen.
-\end{funcdesc}
-
-\begin{funcdesc}{cleol}{}
-Clear to end-of-line.
-\end{funcdesc}
-
-\begin{funcdesc}{inverse}{onoff}
-Enable inverse-video mode:\ characters with the high bit set are
-displayed in inverse video (this disables the upper half of a
-non-\ASCII{} character set).
-\end{funcdesc}
-
-\begin{funcdesc}{gotoxy}{x, y}
-Set the cursor to position \code{(\var{x}, \var{y})}.
-\end{funcdesc}
-
-\begin{funcdesc}{hide}{}
-Hide the window, remembering the contents.
-\end{funcdesc}
-
-\begin{funcdesc}{show}{}
-Show the window again.
-\end{funcdesc}
-
-\begin{funcdesc}{echo2printer}{}
-Copy everything written to the window to the printer as well.
-\end{funcdesc}
diff --git a/Doc/libmacdnr.tex b/Doc/libmacdnr.tex
deleted file mode 100644
index 2aa07f5..0000000
--- a/Doc/libmacdnr.tex
+++ /dev/null
@@ -1,120 +0,0 @@
-\section{Built-in Module \module{macdnr}}
-\label{module-macdnr}
-\bimodindex{macdnr}
-
-This module provides an interface to the Macintosh Domain Name
-Resolver.  It is usually used in conjunction with the \module{mactcp}
-module, to map hostnames to IP addresses.  It may not be available in
-all Mac Python versions.
-\index{Macintosh Domain Name Resolver}
-\index{Domain Name Resolver, Macintosh}
-
-The \module{macdnr} module defines the following functions:
-
-
-\begin{funcdesc}{Open}{\optional{filename}}
-Open the domain name resolver extension.  If \var{filename} is given it
-should be the pathname of the extension, otherwise a default is
-used.  Normally, this call is not needed since the other calls will
-open the extension automatically.
-\end{funcdesc}
-
-\begin{funcdesc}{Close}{}
-Close the resolver extension.  Again, not needed for normal use.
-\end{funcdesc}
-
-\begin{funcdesc}{StrToAddr}{hostname}
-Look up the IP address for \var{hostname}.  This call returns a dnr
-result object of the ``address'' variation.
-\end{funcdesc}
-
-\begin{funcdesc}{AddrToName}{addr}
-Do a reverse lookup on the 32-bit integer IP-address
-\var{addr}.  Returns a dnr result object of the ``address'' variation.
-\end{funcdesc}
-
-\begin{funcdesc}{AddrToStr}{addr}
-Convert the 32-bit integer IP-address \var{addr} to a dotted-decimal
-string.  Returns the string.
-\end{funcdesc}
-
-\begin{funcdesc}{HInfo}{hostname}
-Query the nameservers for a \code{HInfo} record for host
-\var{hostname}.  These records contain hardware and software
-information about the machine in question (if they are available in
-the first place).  Returns a dnr result object of the ``hinfo''
-variety.
-\end{funcdesc}
-
-\begin{funcdesc}{MXInfo}{domain}
-Query the nameservers for a mail exchanger for \var{domain}.  This is
-the hostname of a host willing to accept SMTP\index{SMTP} mail for the
-given domain.  Returns a dnr result object of the ``mx'' variety.
-\end{funcdesc}
-
-\subsection{dnr result object}
-\label{dnr-result-object}
-
-Since the DNR calls all execute asynchronously you do not get the
-results back immediately.  Instead, you get a dnr result object.  You
-can check this object to see whether the query is complete, and access
-its attributes to obtain the information when it is.
-
-Alternatively, you can also reference the result attributes directly,
-this will result in an implicit wait for the query to complete.
-
-The \member{rtnCode} and \member{cname} attributes are always
-available, the others depend on the type of query (address, hinfo or
-mx).
-
-
-% Add args, as in {arg1, arg2 \optional{, arg3}}
-\begin{methoddesc}[dnr result]{wait}{}
-Wait for the query to complete.
-\end{methoddesc}
-
-% Add args, as in {arg1, arg2 \optional{, arg3}}
-\begin{methoddesc}[dnr result]{isdone}{}
-Return \code{1} if the query is complete.
-\end{methoddesc}
-
-
-\begin{memberdesc}[dnr result]{rtnCode}
-The error code returned by the query.
-\end{memberdesc}
-
-\begin{memberdesc}[dnr result]{cname}
-The canonical name of the host that was queried.
-\end{memberdesc}
-
-\begin{memberdesc}[dnr result]{ip0}
-\memberline[dnr result]{ip1}
-\memberline[dnr result]{ip2}
-\memberline[dnr result]{ip3}
-At most four integer IP addresses for this host.  Unused entries are
-zero.  Valid only for address queries.
-\end{memberdesc}
-
-\begin{memberdesc}[dnr result]{cpuType}
-\memberline[dnr result]{osType}
-Textual strings giving the machine type an OS name.  Valid for ``hinfo''
-queries.
-\end{memberdesc}
-
-\begin{memberdesc}[dnr result]{exchange}
-The name of a mail-exchanger host.  Valid for ``mx'' queries.
-\end{memberdesc}
-
-\begin{memberdesc}[dnr result]{preference}
-The preference of this mx record.  Not too useful, since the Macintosh
-will only return a single mx record.  Valid for ``mx'' queries only.
-\end{memberdesc}
-
-The simplest way to use the module to convert names to dotted-decimal
-strings, without worrying about idle time, etc:
-\begin{verbatim}
->>> def gethostname(name):
-...     import macdnr
-...     dnrr = macdnr.StrToAddr(name)
-...     return macdnr.AddrToStr(dnrr.ip0)
-\end{verbatim}
diff --git a/Doc/libmacfs.tex b/Doc/libmacfs.tex
deleted file mode 100644
index 69611b4..0000000
--- a/Doc/libmacfs.tex
+++ /dev/null
@@ -1,225 +0,0 @@
-\section{Built-in Module \module{macfs}}
-\label{module-macfs}
-\bimodindex{macfs}
-
-
-This module provides access to Macintosh FSSpec handling, the Alias
-Manager, \program{finder} aliases and the Standard File package.
-\index{Macintosh Alias Manager}
-\index{Alias Manager, Macintosh}
-\index{Standard File}
-
-Whenever a function or method expects a \var{file} argument, this
-argument can be one of three things:\ (1) a full or partial Macintosh
-pathname, (2) an \pytype{FSSpec} object or (3) a 3-tuple \code{(\var{wdRefNum},
-\var{parID}, \var{name})} as described in \emph{Inside
-Macintosh:\ Files}\@. A description of aliases and the Standard File
-package can also be found there.
-
-\begin{funcdesc}{FSSpec}{file}
-Create an \pytype{FSSpec} object for the specified file.
-\end{funcdesc}
-
-\begin{funcdesc}{RawFSSpec}{data}
-Create an \pytype{FSSpec} object given the raw data for the \C{}
-structure for the \pytype{FSSpec} as a string.  This is mainly useful
-if you have obtained an \pytype{FSSpec} structure over a network.
-\end{funcdesc}
-
-\begin{funcdesc}{RawAlias}{data}
-Create an \pytype{Alias} object given the raw data for the \C{}
-structure for the alias as a string.  This is mainly useful if you
-have obtained an \pytype{FSSpec} structure over a network.
-\end{funcdesc}
-
-\begin{funcdesc}{FInfo}{}
-Create a zero-filled \pytype{FInfo} object.
-\end{funcdesc}
-
-\begin{funcdesc}{ResolveAliasFile}{file}
-Resolve an alias file. Returns a 3-tuple \code{(\var{fsspec},
-\var{isfolder}, \var{aliased})} where \var{fsspec} is the resulting
-\pytype{FSSpec} object, \var{isfolder} is true if \var{fsspec} points
-to a folder and \var{aliased} is true if the file was an alias in the
-first place (otherwise the \pytype{FSSpec} object for the file itself
-is returned).
-\end{funcdesc}
-
-\begin{funcdesc}{StandardGetFile}{\optional{type, ...}}
-Present the user with a standard ``open input file''
-dialog. Optionally, you can pass up to four 4-character file types to limit
-the files the user can choose from. The function returns an \pytype{FSSpec}
-object and a flag indicating that the user completed the dialog
-without cancelling.
-\end{funcdesc}
-
-\begin{funcdesc}{PromptGetFile}{prompt\optional{, type, ...}}
-Similar to \function{StandardGetFile()} but allows you to specify a
-prompt.
-\end{funcdesc}
-
-\begin{funcdesc}{StandardPutFile}{prompt, \optional{default}}
-Present the user with a standard ``open output file''
-dialog. \var{prompt} is the prompt string, and the optional
-\var{default} argument initializes the output file name. The function
-returns an \pytype{FSSpec} object and a flag indicating that the user
-completed the dialog without cancelling.
-\end{funcdesc}
-
-\begin{funcdesc}{GetDirectory}{\optional{prompt}}
-Present the user with a non-standard ``select a directory''
-dialog. \var{prompt} is the prompt string, and the optional.
-Return an \pytype{FSSpec} object and a success-indicator.
-\end{funcdesc}
-
-\begin{funcdesc}{SetFolder}{\optional{fsspec}}
-Set the folder that is initially presented to the user when one of
-the file selection dialogs is presented. \var{fsspec} should point to
-a file in the folder, not the folder itself (the file need not exist,
-though). If no argument is passed the folder will be set to the
-current directory, i.e. what \function{os.getcwd()} returns.
-
-Note that starting with system 7.5 the user can change Standard File
-behaviour with the ``general controls'' controlpanel, thereby making
-this call inoperative.
-\end{funcdesc}
-
-\begin{funcdesc}{FindFolder}{where, which, create}
-Locates one of the ``special'' folders that MacOS knows about, such as
-the trash or the Preferences folder. \var{where} is the disk to
-search, \var{which} is the 4-character string specifying which folder to
-locate. Setting \var{create} causes the folder to be created if it
-does not exist. Returns a \code{(\var{vrefnum}, \var{dirid})} tuple.
-\end{funcdesc}
-
-\begin{funcdesc}{NewAliasMinimalFromFullPath}{pathname}
-Return a minimal \pytype{alias} object that points to the given file, which
-must be specified as a full pathname. This is the only way to create an
-\pytype{Alias} pointing to a non-existing file.
-
-The constants for \var{where} and \var{which} can be obtained from the
-standard module \var{MACFS}.
-\end{funcdesc}
-
-\begin{funcdesc}{FindApplication}{creator}
-Locate the application with 4-char creator code \var{creator}. The
-function returns an \pytype{FSSpec} object pointing to the application.
-\end{funcdesc}
-
-\subsection{FSSpec objects}
-\label{fsspec-objects}
-
-\begin{memberdesc}[FSSpec]{data}
-The raw data from the FSSpec object, suitable for passing
-to other applications, for instance.
-\end{memberdesc}
-
-\begin{methoddesc}[FSSpec]{as_pathname}{}
-Return the full pathname of the file described by the \pytype{FSSpec}
-object.
-\end{methoddesc}
-
-\begin{methoddesc}[FSSpec]{as_tuple}{}
-Return the \code{(\var{wdRefNum}, \var{parID}, \var{name})} tuple of
-the file described by the \pytype{FSSpec} object.
-\end{methoddesc}
-
-\begin{methoddesc}[FSSpec]{NewAlias}{\optional{file}}
-Create an Alias object pointing to the file described by this
-FSSpec. If the optional \var{file} parameter is present the alias
-will be relative to that file, otherwise it will be absolute.
-\end{methoddesc}
-
-\begin{methoddesc}[FSSpec]{NewAliasMinimal}{}
-Create a minimal alias pointing to this file.
-\end{methoddesc}
-
-\begin{methoddesc}[FSSpec]{GetCreatorType}{}
-Return the 4-character creator and type of the file.
-\end{methoddesc}
-
-\begin{methoddesc}[FSSpec]{SetCreatorType}{creator, type}
-Set the 4-character creator and type of the file.
-\end{methoddesc}
-
-\begin{methoddesc}[FSSpec]{GetFInfo}{}
-Return a \pytype{FInfo} object describing the finder info for the file.
-\end{methoddesc}
-
-\begin{methoddesc}[FSSpec]{SetFInfo}{finfo}
-Set the finder info for the file to the values given as \var{finfo}
-(an \pytype{FInfo} object).
-\end{methoddesc}
-
-\begin{methoddesc}[FSSpec]{GetDates}{}
-Return a tuple with three floating point values representing the
-creation date, modification date and backup date of the file.
-\end{methoddesc}
-
-\begin{methoddesc}[FSSpec]{SetDates}{crdate, moddate, backupdate}
-Set the creation, modification and backup date of the file. The values
-are in the standard floating point format used for times throughout
-Python.
-\end{methoddesc}
-
-
-\subsection{Alias Objects}
-\label{alias-objects}
-
-\begin{memberdesc}[Alias]{data}
-The raw data for the Alias record, suitable for storing in a resource
-or transmitting to other programs.
-\end{memberdesc}
-
-\begin{methoddesc}[Alias]{Resolve}{\optional{file}}
-Resolve the alias. If the alias was created as a relative alias you
-should pass the file relative to which it is. Return the FSSpec for
-the file pointed to and a flag indicating whether the \pytype{Alias} object
-itself was modified during the search process. If the file does
-not exist but the path leading up to it does exist a valid fsspec
-is returned.
-\end{methoddesc}
-
-\begin{methoddesc}[Alias]{GetInfo}{num}
-An interface to the \C{} routine \cfunction{GetAliasInfo()}.
-\end{methoddesc}
-
-\begin{methoddesc}[Alias]{Update}{file, \optional{file2}}
-Update the alias to point to the \var{file} given. If \var{file2} is
-present a relative alias will be created.
-\end{methoddesc}
-
-Note that it is currently not possible to directly manipulate a
-resource as an \pytype{Alias} object. Hence, after calling
-\method{Update()} or after \method{Resolve()} indicates that the alias
-has changed the Python program is responsible for getting the
-\member{data} value from the \pytype{Alias} object and modifying the
-resource.
-
-
-\subsection{FInfo Objects}
-\label{finfo-objects}
-
-See \emph{Inside Macintosh: Files} for a complete description of what
-the various fields mean.
-
-\begin{memberdesc}[FInfo]{Creator}
-The 4-character creator code of the file.
-\end{memberdesc}
-
-\begin{memberdesc}[FInfo]{Type}
-The 4-character type code of the file.
-\end{memberdesc}
-
-\begin{memberdesc}[FInfo]{Flags}
-The finder flags for the file as 16-bit integer. The bit values in
-\var{Flags} are defined in standard module \module{MACFS}.
-\end{memberdesc}
-
-\begin{memberdesc}[FInfo]{Location}
-A Point giving the position of the file's icon in its folder.
-\end{memberdesc}
-
-\begin{memberdesc}[FInfo]{Fldr}
-The folder the file is in (as an integer).
-\end{memberdesc}
diff --git a/Doc/libmacic.tex b/Doc/libmacic.tex
deleted file mode 100644
index 33364cd..0000000
--- a/Doc/libmacic.tex
+++ /dev/null
@@ -1,124 +0,0 @@
-\section{Standard Module \module{ic}}
-\label{module-ic}
-\bimodindex{ic}
-
-
-This module provides access to Macintosh Internet Config package,
-which stores preferences for Internet programs such as mail address,
-default homepage, etc. Also, Internet Config contains an elaborate set
-of mappings from Macintosh creator/type codes to foreign filename
-extensions plus information on how to transfer files (binary, ascii,
-etc).
-
-There is a low-level companion module
-\module{icglue}\refbimodindex{icglue} which provides the basic
-Internet Config access functionality.  This low-level module is not
-documented, but the docstrings of the routines document the parameters
-and the routine names are the same as for the Pascal or \C{} API to
-Internet Config, so the standard IC programmers' documentation can be
-used if this module is needed.
-
-The \module{ic} module defines the \exception{error} exception and
-symbolic names for all error codes Internet Config can produce; see
-the source for details.
-
-\begin{excdesc}{error}
-Exception raised on errors in the \module{ic} module.
-\end{excdesc}
-
-
-The \module{ic} module defines the following class and function:
-
-\begin{classdesc}{IC}{\optional{signature\optional{, ic}}}
-Create an internet config object. The signature is a 4-character creator
-code of the current application (default \code{'Pyth'}) which may
-influence some of ICs settings. The optional \var{ic} argument is a
-low-level \code{icglue.icinstance} created beforehand, this may be
-useful if you want to get preferences from a different config file,
-etc.
-\end{classdesc}
-
-\begin{funcdesc}{launchurl}{url\optional{, hint}}
-\funcline{parseurl}{data\optional{, start\optional{, end\optional{, hint}}}}
-\funcline{mapfile}{file}
-\funcline{maptypecreator}{type, creator\optional{, filename}}
-\funcline{settypecreator}{file}
-These functions are ``shortcuts'' to the methods of the same name,
-described below.
-\end{funcdesc}
-
-
-\subsection{IC Objects}
-
-\class{IC} objects have a mapping interface, hence to obtain the mail
-address you simply get \code{\var{ic}['MailAddress']}. Assignment also
-works, and changes the option in the configuration file.
-
-The module knows about various datatypes, and converts the internal IC
-representation to a ``logical'' Python data structure. Running the
-\module{ic} module standalone will run a test program that lists all
-keys and values in your IC database, this will have to server as
-documentation.
-
-If the module does not know how to represent the data it returns an
-instance of the \code{ICOpaqueData} type, with the raw data in its
-\member{data} attribute. Objects of this type are also acceptable values
-for assignment.
-
-Besides the dictionary interface, \class{IC} objects have the
-following methods:
-
-
-\begin{methoddesc}{launchurl}{url\optional{, hint}}
-Parse the given URL, lauch the correct application and pass it the
-URL. The optional \var{hint} can be a scheme name such as
-\code{'mailto:'}, in which case incomplete URLs are completed with this
-scheme.  If \var{hint} is not provided, incomplete URLs are invalid.
-\end{methoddesc}
-
-\begin{methoddesc}{parseurl}{data\optional{, start\optional{, end\optional{, hint}}}}
-Find an URL somewhere in \var{data} and return start position, end
-position and the URL. The optional \var{start} and \var{end} can be
-used to limit the search, so for instance if a user clicks in a long
-textfield you can pass the whole textfield and the click-position in
-\var{start} and this routine will return the whole URL in which the
-user clicked.  As above, \var{hint} is an optional scheme used to
-complete incomplete URLs.
-\end{methoddesc}
-
-\begin{methoddesc}{mapfile}{file}
-Return the mapping entry for the given \var{file}, which can be passed
-as either a filename or an \function{macfs.FSSpec()} result, and which
-need not exist.
-
-The mapping entry is returned as a tuple \code{(}\var{version},
-\var{type}, \var{creator}, \var{postcreator}, \var{flags},
-\var{extension}, \var{appname}, \var{postappname}, \var{mimetype},
-\var{entryname}\code{)}, where \var{version} is the entry version
-number, \var{type} is the 4-character filetype, \var{creator} is the
-4-character creator type, \var{postcreator} is the 4-character creator
-code of an
-optional application to post-process the file after downloading,
-\var{flags} are various bits specifying whether to transfer in binary
-or ascii and such, \var{extension} is the filename extension for this
-file type, \var{appname} is the printable name of the application to
-which this file belongs, \var{postappname} is the name of the
-postprocessing application, \var{mimetype} is the MIME type of this
-file and \var{entryname} is the name of this entry.
-\end{methoddesc}
-
-\begin{methoddesc}{maptypecreator}{type, creator\optional{, filename}}
-Return the mapping entry for files with given 4-character \var{type} and
-\var{creator} codes. The optional \var{filename} may be specified to
-further help finding the correct entry (if the creator code is
-\code{'????'}, for instance).
-
-The mapping entry is returned in the same format as for \var{mapfile}.
-\end{methoddesc}
-
-\begin{methoddesc}{settypecreator}{file}
-Given an existing \var{file}, specified either as a filename or as an
-\function{macfs.FSSpec()} result, set its creator and type correctly based
-on its extension.  The finder is told about the change, so the finder
-icon will be updated quickly.
-\end{methoddesc}
diff --git a/Doc/libmacos.tex b/Doc/libmacos.tex
deleted file mode 100644
index e634772..0000000
--- a/Doc/libmacos.tex
+++ /dev/null
@@ -1,95 +0,0 @@
-\section{Built-in Module \module{MacOS}}
-\label{module-MacOS}
-\bimodindex{MacOS}
-
-
-This module provides access to MacOS specific functionality in the
-Python interpreter, such as how the interpreter eventloop functions
-and the like. Use with care.
-
-Note the capitalisation of the module name, this is a historical
-artifact.
-
-\begin{excdesc}{Error}
-This exception is raised on MacOS generated errors, either from
-functions in this module or from other mac-specific modules like the
-toolbox interfaces. The arguments are the integer error code (the
-\cdata{OSErr} value) and a textual description of the error code.
-Symbolic names for all known error codes are defined in the standard
-module \module{macerrors}\refstmodindex{macerrors}.
-\end{excdesc}
-
-\begin{funcdesc}{SetEventHandler}{handler}
-In the inner interpreter loop Python will occasionally check for events,
-unless disabled with \function{ScheduleParams()}. With this function you
-can pass a Python event-handler function that will be called if an event
-is available. The event is passed as parameter and the function should return
-non-zero if the event has been fully processed, otherwise event processing
-continues (by passing the event to the console window package, for instance).
-
-Call \function{SetEventHandler()} without a parameter to clear the
-event handler. Setting an event handler while one is already set is an
-error.
-\end{funcdesc}
-
-\begin{funcdesc}{SchedParams}{\optional{doint\optional{, evtmask\optional{,
-                              besocial\optional{, interval\optional{,
-                              bgyield}}}}}}
-Influence the interpreter inner loop event handling. \var{Interval}
-specifies how often (in seconds, floating point) the interpreter
-should enter the event processing code. When true, \var{doint} causes
-interrupt (command-dot) checking to be done. \var{evtmask} tells the
-interpreter to do event processing for events in the mask (redraws,
-mouseclicks to switch to other applications, etc). The \var{besocial}
-flag gives other processes a chance to run. They are granted minimal
-runtime when Python is in the foreground and \var{bgyield} seconds per
-\var{interval} when Python runs in the background.
-
-All parameters are optional, and default to the current value. The return
-value of this function is a tuple with the old values of these options.
-Initial defaults are that all processing is enabled, checking is done every
-quarter second and the CPU is given up for a quarter second when in the
-background.
-\end{funcdesc}
-
-\begin{funcdesc}{HandleEvent}{ev}
-Pass the event record \var{ev} back to the Python event loop, or
-possibly to the handler for the \code{sys.stdout} window (based on the
-compiler used to build Python). This allows Python programs that do
-their own event handling to still have some command-period and
-window-switching capability.
-
-If you attempt to call this function from an event handler set through
-\function{SetEventHandler()} you will get an exception.
-\end{funcdesc}
-
-\begin{funcdesc}{GetErrorString}{errno}
-Return the textual description of MacOS error code \var{errno}.
-\end{funcdesc}
-
-\begin{funcdesc}{splash}{resid}
-This function will put a splash window
-on-screen, with the contents of the DLOG resource specified by
-\var{resid}. Calling with a zero argument will remove the splash
-screen. This function is useful if you want an applet to post a splash screen
-early in initialization without first having to load numerous
-extension modules.
-\end{funcdesc}
-
-\begin{funcdesc}{DebugStr}{message \optional{, object}}
-Drop to the low-level debugger with message \var{message}. The
-optional \var{object} argument is not used, but can easily be
-inspected from the debugger.
-
-Note that you should use this function with extreme care: if no
-low-level debugger like MacsBug is installed this call will crash your
-system. It is intended mainly for developers of Python extension
-modules.
-\end{funcdesc}
-
-\begin{funcdesc}{openrf}{name \optional{, mode}}
-Open the resource fork of a file. Arguments are the same as for the
-built-in function \function{open()}. The object returned has file-like
-semantics, but it is not a Python file object, so there may be subtle
-differences.
-\end{funcdesc}
diff --git a/Doc/libmacostools.tex b/Doc/libmacostools.tex
deleted file mode 100644
index 9586285..0000000
--- a/Doc/libmacostools.tex
+++ /dev/null
@@ -1,99 +0,0 @@
-\section{Standard Module \module{macostools}}
-\label{module-macostools}
-\stmodindex{macostools}
-
-This module contains some convenience routines for file-manipulation
-on the Macintosh.
-
-The \module{macostools} module defines the following functions:
-
-
-\begin{funcdesc}{copy}{src, dst\optional{, createpath\optional{, copytimes}}}
-Copy file \var{src} to \var{dst}. The files can be specified as
-pathnames or \pytype{FSSpec} objects. If \var{createpath} is non-zero
-\var{dst} must be a pathname and the folders leading to the
-destination are created if necessary.  The method copies data and
-resource fork and some finder information (creator, type, flags) and
-optionally the creation, modification and backup times (default is to
-copy them). Custom icons, comments and icon position are not copied.
-
-If the source is an alias the original to which the alias points is
-copied, not the aliasfile.
-\end{funcdesc}
-
-\begin{funcdesc}{copytree}{src, dst}
-Recursively copy a file tree from \var{src} to \var{dst}, creating
-folders as needed. \var{src} and \var{dst} should be specified as
-pathnames.
-\end{funcdesc}
-
-\begin{funcdesc}{mkalias}{src, dst}
-Create a finder alias \var{dst} pointing to \var{src}. Both may be
-specified as pathnames or \pytype{FSSpec} objects.
-\end{funcdesc}
-
-\begin{funcdesc}{touched}{dst}
-Tell the finder that some bits of finder-information such as creator
-or type for file \var{dst} has changed. The file can be specified by
-pathname or fsspec. This call should prod the finder into redrawing the
-files icon.
-\end{funcdesc}
-
-\begin{datadesc}{BUFSIZ}
-The buffer size for \code{copy}, default 1 megabyte.
-\end{datadesc}
-
-Note that the process of creating finder aliases is not specified in
-the Apple documentation. Hence, aliases created with \function{mkalias()}
-could conceivably have incompatible behaviour in some cases.
-
-\section{Standard Module \module{findertools}}
-\label{module-findertools}
-\stmodindex{findertools}
-
-This module contains routines that give Python programs access to some
-functionality provided by the finder. They are implemented as wrappers
-around the AppleEvent\index{AppleEvents} interface to the finder.
-
-All file and folder parameters can be specified either as full
-pathnames or as \pytype{FSSpec} objects.
-
-The \module{findertools} module defines the following functions:
-
-
-\begin{funcdesc}{launch}{file}
-Tell the finder to launch \var{file}. What launching means depends on the file:
-applications are started, folders are opened and documents are opened
-in the correct application.
-\end{funcdesc}
-
-\begin{funcdesc}{Print}{file}
-Tell the finder to print a file (again specified by full pathname or
-\pytype{FSSpec}). The behaviour is identical to selecting the file and using
-the print command in the finder.
-\end{funcdesc}
-
-\begin{funcdesc}{copy}{file, destdir}
-Tell the finder to copy a file or folder \var{file} to folder
-\var{destdir}. The function returns an \pytype{Alias} object pointing to
-the new file.
-\end{funcdesc}
-
-\begin{funcdesc}{move}{file, destdir}
-Tell the finder to move a file or folder \var{file} to folder
-\var{destdir}. The function returns an \pytype{Alias} object pointing to
-the new file.
-\end{funcdesc}
-
-\begin{funcdesc}{sleep}{}
-Tell the finder to put the Macintosh to sleep, if your machine
-supports it.
-\end{funcdesc}
-
-\begin{funcdesc}{restart}{}
-Tell the finder to perform an orderly restart of the machine.
-\end{funcdesc}
-
-\begin{funcdesc}{shutdown}{}
-Tell the finder to perform an orderly shutdown of the machine.
-\end{funcdesc}
diff --git a/Doc/libmacspeech.tex b/Doc/libmacspeech.tex
deleted file mode 100644
index 14a9c61..0000000
--- a/Doc/libmacspeech.tex
+++ /dev/null
@@ -1,93 +0,0 @@
-\section{Built-in Module \module{macspeech}}
-\label{module-macspeech}
-\bimodindex{macspeech}
-
-
-This module provides an interface to the Macintosh Speech Manager,
-\index{Macintosh Speech Manager}
-\index{Speech Manager, Macintosh}
-allowing you to let the Macintosh utter phrases. You need a version of
-the Speech Manager extension (version 1 and 2 have been tested) in
-your \file{Extensions} folder for this to work. The module does not
-provide full access to all features of the Speech Manager yet.  It may
-not be available in all Mac Python versions.
-
-\begin{funcdesc}{Available}{}
-Test availability of the Speech Manager extension (and, on the
-PowerPC, the Speech Manager shared library). Return \code{0} or
-\code{1}.
-\end{funcdesc}
-
-\begin{funcdesc}{Version}{}
-Return the (integer) version number of the Speech Manager.
-\end{funcdesc}
-
-\begin{funcdesc}{SpeakString}{str}
-Utter the string \var{str} using the default voice,
-asynchronously. This aborts any speech that may still be active from
-prior \function{SpeakString()} invocations.
-\end{funcdesc}
-
-\begin{funcdesc}{Busy}{}
-Return the number of speech channels busy, system-wide.
-\end{funcdesc}
-
-\begin{funcdesc}{CountVoices}{}
-Return the number of different voices available.
-\end{funcdesc}
-
-\begin{funcdesc}{GetIndVoice}{num}
-Return a \pytype{Voice} object for voice number \var{num}.
-\end{funcdesc}
-
-\subsection{Voice Objects}
-\label{voice-objects}
-
-Voice objects contain the description of a voice. It is currently not
-yet possible to access the parameters of a voice.
-
-\setindexsubitem{(voice object method)}
-
-\begin{methoddesc}[Voice]{GetGender}{}
-Return the gender of the voice: \code{0} for male, \code{1} for female
-and \code{-1} for neuter.
-\end{methoddesc}
-
-\begin{methoddesc}[Voice]{NewChannel}{}
-Return a new Speech Channel object using this voice.
-\end{methoddesc}
-
-\subsection{Speech Channel Objects}
-\label{speech-channel-objects}
-
-A Speech Channel object allows you to speak strings with slightly more
-control than \function{SpeakString()}, and allows you to use multiple
-speakers at the same time. Please note that channel pitch and rate are
-interrelated in some way, so that to make your Macintosh sing you will
-have to adjust both.
-
-\begin{methoddesc}[Speech Channel]{SpeakText}{str}
-Start uttering the given string.
-\end{methoddesc}
-
-\begin{methoddesc}[Speech Channel]{Stop}{}
-Stop babbling.
-\end{methoddesc}
-
-\begin{methoddesc}[Speech Channel]{GetPitch}{}
-Return the current pitch of the channel, as a floating-point number.
-\end{methoddesc}
-
-\begin{methoddesc}[Speech Channel]{SetPitch}{pitch}
-Set the pitch of the channel.
-\end{methoddesc}
-
-\begin{methoddesc}[Speech Channel]{GetRate}{}
-Get the speech rate (utterances per minute) of the channel as a
-floating point number.
-\end{methoddesc}
-
-\begin{methoddesc}[Speech Channel]{SetRate}{rate}
-Set the speech rate of the channel.
-\end{methoddesc}
-
diff --git a/Doc/libmactcp.tex b/Doc/libmactcp.tex
deleted file mode 100644
index b592247..0000000
--- a/Doc/libmactcp.tex
+++ /dev/null
@@ -1,178 +0,0 @@
-\section{Built-in Module \module{mactcp}}
-\label{module-mactcp}
-\bimodindex{mactcp}
-
-
-This module provides an interface to the Macintosh TCP/IP driver%
-\index{MacTCP} MacTCP\@. There is an accompanying module,
-\module{macdnr}\refbimodindex{macdnr}, which provides an interface to
-the name-server (allowing you to translate hostnames to IP addresses),
-a module \module{MACTCPconst}\refstmodindex{MACTCPconst} which has
-symbolic names for constants constants used by MacTCP. Since the
-built-in module \module{socket} is also available on the Macintosh it
-is usually easier to use sockets instead of the Macintosh-specific
-MacTCP API.
-
-A complete description of the MacTCP interface can be found in the
-Apple MacTCP API documentation.
-
-\begin{funcdesc}{MTU}{}
-Return the Maximum Transmit Unit (the packet size) of the network
-interface.\index{Maximum Transmit Unit}
-\end{funcdesc}
-
-\begin{funcdesc}{IPAddr}{}
-Return the 32-bit integer IP address of the network interface.
-\end{funcdesc}
-
-\begin{funcdesc}{NetMask}{}
-Return the 32-bit integer network mask of the interface.
-\end{funcdesc}
-
-\begin{funcdesc}{TCPCreate}{size}
-Create a TCP Stream object. \var{size} is the size of the receive
-buffer, \code{4096} is suggested by various sources.
-\end{funcdesc}
-
-\begin{funcdesc}{UDPCreate}{size, port}
-Create a UDP Stream object. \var{size} is the size of the receive
-buffer (and, hence, the size of the biggest datagram you can receive
-on this port). \var{port} is the UDP port number you want to receive
-datagrams on, a value of zero will make MacTCP select a free port.
-\end{funcdesc}
-
-
-\subsection{TCP Stream Objects}
-
-\begin{memberdesc}[TCP Stream]{asr}
-\index{asynchronous service routine}
-\index{service routine, asynchronous}
-When set to a value different than \code{None} this should refer to a
-function with two integer parameters:\ an event code and a detail. This
-function will be called upon network-generated events such as urgent
-data arrival.  Macintosh documentation calls this the
-\dfn{asynchronous service routine}.  In addition, it is called with
-eventcode \code{MACTCP.PassiveOpenDone} when a \code{PassiveOpen}
-completes. This is a Python addition to the MacTCP semantics.
-It is safe to do further calls from \var{asr}.
-\end{memberdesc}
-
-
-\begin{methoddesc}[TCP Stream]{PassiveOpen}{port}
-Wait for an incoming connection on TCP port \var{port} (zero makes the
-system pick a free port). The call returns immediately, and you should
-use \method{wait()} to wait for completion. You should not issue any method
-calls other than \method{wait()}, \method{isdone()} or
-\method{GetSockName()} before the call completes.
-\end{methoddesc}
-
-\begin{methoddesc}[TCP Stream]{wait}{}
-Wait for \code{PassiveOpen} to complete.
-\end{methoddesc}
-
-\begin{methoddesc}[TCP Stream]{isdone}{}
-Return \code{1} if a \code{PassiveOpen} has completed.
-\end{methoddesc}
-
-\begin{methoddesc}[TCP Stream]{GetSockName}{}
-Return the TCP address of this side of a connection as a 2-tuple
-\code{(\var{host}, \var{port})}, both integers.
-\end{methoddesc}
-
-\begin{methoddesc}[TCP Stream]{ActiveOpen}{lport, host, rport}
-Open an outgoing connection to TCP address \code{(\var{host},
-\var{rport})}. Use
-local port \var{lport} (zero makes the system pick a free port). This
-call blocks until the connection has been established.
-\end{methoddesc}
-
-\begin{methoddesc}[TCP Stream]{Send}{buf, push, urgent}
-Send data \var{buf} over the connection. \var{push} and \var{urgent}
-are flags as specified by the TCP standard.
-\end{methoddesc}
-
-\begin{methoddesc}[TCP Stream]{Rcv}{timeout}
-Receive data. The call returns when \var{timeout} seconds have passed
-or when (according to the MacTCP documentation) ``a reasonable amount
-of data has been received''. The return value is a 3-tuple
-\code{(\var{data}, \var{urgent}, \var{mark})}. If urgent data is
-outstanding \code{Rcv} will always return that before looking at any
-normal data. The first call returning urgent data will have the
-\var{urgent} flag set, the last will have the \var{mark} flag set.
-\end{methoddesc}
-
-\begin{methoddesc}[TCP Stream]{Close}{}
-Tell MacTCP that no more data will be transmitted on this
-connection. The call returns when all data has been acknowledged by
-the receiving side.
-\end{methoddesc}
-
-\begin{methoddesc}[TCP Stream]{Abort}{}
-Forcibly close both sides of a connection, ignoring outstanding data.
-\end{methoddesc}
-
-\begin{methoddesc}[TCP Stream]{Status}{}
-Return a TCP status object for this stream giving the current status
-(see below).
-\end{methoddesc}
-
-
-\subsection{TCP Status Objects}
-
-This object has no methods, only some members holding information on
-the connection. A complete description of all fields in this objects
-can be found in the Apple documentation. The most interesting ones are:
-
-\begin{memberdesc}[TCP Status]{localHost}
-\memberline{localPort}
-\memberline{remoteHost}
-\memberline{remotePort}
-The integer IP-addresses and port numbers of both endpoints of the
-connection. 
-\end{memberdesc}
-
-\begin{memberdesc}[TCP Status]{sendWindow}
-The current window size.
-\end{memberdesc}
-
-\begin{memberdesc}[TCP Status]{amtUnackedData}
-The number of bytes sent but not yet acknowledged. \code{sendWindow -
-amtUnackedData} is what you can pass to \method{Send()} without
-blocking.
-\end{memberdesc}
-
-\begin{memberdesc}[TCP Status]{amtUnreadData}
-The number of bytes received but not yet read (what you can
-\method{Recv()} without blocking).
-\end{memberdesc}
-
-
-
-\subsection{UDP Stream Objects}
-
-Note that, unlike the name suggests, there is nothing stream-like
-about UDP.
-
-
-\begin{memberdesc}[UDP Stream]{asr}
-\index{asynchronous service routine}
-\index{service routine, asynchronous}
-The asynchronous service routine to be called on events such as
-datagram arrival without outstanding \code{Read} call. The \var{asr}
-has a single argument, the event code.
-\end{memberdesc}
-
-\begin{memberdesc}[UDP Stream]{port}
-A read-only member giving the port number of this UDP Stream.
-\end{memberdesc}
-
-
-\begin{methoddesc}[UDP Stream]{Read}{timeout}
-Read a datagram, waiting at most \var{timeout} seconds (-1 is
-infinite).  Return the data.
-\end{methoddesc}
-
-\begin{methoddesc}[UDP Stream]{Write}{host, port, buf}
-Send \var{buf} as a datagram to IP-address \var{host}, port
-\var{port}.
-\end{methoddesc}
diff --git a/Doc/libmacui.tex b/Doc/libmacui.tex
deleted file mode 100644
index 7f5237b..0000000
--- a/Doc/libmacui.tex
+++ /dev/null
@@ -1,54 +0,0 @@
-\section{Standard Module \module{EasyDialogs}}
-\label{module-EasyDialogs}
-\stmodindex{EasyDialogs}
-
-The \module{EasyDialogs} module contains some simple dialogs for
-the Macintosh, modelled after the \module{stdwin} dialogs with similar
-names. All routines have an optional parameter \var{id} with which you
-can override the DLOG resource used for the dialog, as long as the
-item numbers correspond. See the source for details.
- 
-The \module{EasyDialogs} module defines the following functions:
-
-
-\begin{funcdesc}{Message}{str}
-A modal dialog with the message text \var{str}, which should be at
-most 255 characters long, is displayed. Control is returned when the
-user clicks ``OK''.
-\end{funcdesc}
-
-\begin{funcdesc}{AskString}{prompt\optional{, default}}
-Ask the user to input a string value, in a modal dialog. \var{prompt}
-is the promt message, the optional \var{default} arg is the initial
-value for the string. All strings can be at most 255 bytes
-long. \function{AskString()} returns the string entered or \code{None}
-in case the user cancelled.
-\end{funcdesc}
-
-\begin{funcdesc}{AskYesNoCancel}{question\optional{, default}}
-Present a dialog with text \var{question} and three buttons labelled
-``yes'', ``no'' and ``cancel''. Return \code{1} for yes, \code{0} for
-no and \code{-1} for cancel. The default return value chosen by
-hitting return is \code{0}. This can be changed with the optional
-\var{default} argument.
-\end{funcdesc}
-
-\begin{funcdesc}{ProgressBar}{\optional{label\optional{, maxval}}}
-Display a modeless progress dialog with a thermometer bar. \var{label}
-is the text string displayed (default ``Working...''), \var{maxval} is
-the value at which progress is complete (default \code{100}). The
-returned object has one method, \code{set(\var{value})}, which sets
-the value of the progress bar. The bar remains visible until the
-object returned is discarded.
-
-The progress bar has a ``cancel'' button, but it is currently
-non-functional.
-\end{funcdesc}
-
-Note that \module{EasyDialogs} does not currently use the notification
-manager. This means that displaying dialogs while the program is in
-the background will lead to unexpected results and possibly
-crashes. Also, all dialogs are modeless and hence expect to be at the
-top of the stacking order. This is true when the dialogs are created,
-but windows that pop-up later (like a console window) may also result
-in crashes.
diff --git a/Doc/mac.tex b/Doc/mac.tex
deleted file mode 100644
index 8a18459..0000000
--- a/Doc/mac.tex
+++ /dev/null
@@ -1,67 +0,0 @@
-\documentclass{howto}
-
-\title{Macintosh Library Modules}
-
-\input{boilerplate}
-
-\makeindex			% tell \index to actually write the
-				% .idx file
-\makemodindex			% ... and the module index as well.
-
-
-\begin{document}
-
-\maketitle
-
-\input{copyright}
-
-\begin{abstract}
-
-\noindent
-This library reference manual documents Python's extensions for the
-Macintosh.  It should be used in conjunction with the \emph{Python
-Library Reference}, which documents the standard library and built-in
-types.
-
-This manual assumes basic knowledge about the Python language.  For an
-informal introduction to Python, see the \emph{Python Tutorial}; the
-\emph{Python Reference Manual} remains the highest authority on
-syntactic and semantic questions.  Finally, the manual entitled
-\emph{Extending and Embedding the Python Interpreter} describes how to
-add new extensions to Python and how to embed it in other applications.
-
-\end{abstract}
-
-\tableofcontents
-
-\input{libmac}			% MACINTOSH ONLY
-\input{libctb}
-\input{libmacconsole}
-\input{libmacdnr}
-\input{libmacfs}
-\input{libmacic}
-\input{libmacos}
-\input{libmacostools}
-\input{libmactcp}
-\input{libmacspeech}
-\input{libmacui}
-\input{libframework}
-\input{libminiae}
-
-%
-%  The ugly "%begin{latexonly}" pseudo-environments are really just to
-%  keep LaTeX2HTML quiet during the \renewcommand{} macros; they're
-%  not really valuable.
-%
-
-%begin{latexonly}
-\renewcommand{\indexname}{Module Index}
-%end{latexonly}
-\input{modmac.ind}		% Module Index
-
-%begin{latexonly}
-\renewcommand{\indexname}{Index}
-%end{latexonly}
-\input{mac.ind}			% Index
-
-\end{document}
-- 
cgit v0.12

