From 228b8e88bc7a7ce740e5c7326697e7c2256e099f Mon Sep 17 00:00:00 2001
From: Guido van Rossum <guido@python.org>
Date: Wed, 2 Apr 1997 06:13:34 +0000
Subject: Whole lotta changes.

---
 Lib/dos-8x3/cgihttps.py |   5 -
 Lib/dos-8x3/formatte.py |   4 +-
 Lib/dos-8x3/posixpat.py |  19 ++-
 Lib/dos-8x3/py_compi.py |   2 +-
 Lib/dos-8x3/test_arr.py |  38 ++++--
 Lib/dos-8x3/test_aud.py | 355 ++++++++++++++++++++++++++++--------------------
 Lib/dos-8x3/test_bin.py |  46 +++++++
 Lib/dos-8x3/test_bsd.py |  69 ++++++++++
 Lib/dos-8x3/test_cma.py |  47 ++++---
 Lib/dos-8x3/test_cry.py |   7 +-
 Lib/dos-8x3/test_err.py |  44 ++++++
 Lib/dos-8x3/test_fcn.py |  28 ++++
 Lib/dos-8x3/test_gdb.py |  34 +++++
 Lib/dos-8x3/test_ima.py | 165 ++++++++++++++++++++++
 Lib/dos-8x3/test_img.py | 110 +++++++++++++++
 Lib/dos-8x3/test_reg.py |  62 +++++++++
 Lib/dos-8x3/test_rgb.py |   3 +-
 Lib/dos-8x3/test_rot.py |  28 ++++
 Lib/dos-8x3/test_sel.py |  40 +++++-
 Lib/dos-8x3/test_sig.py |  33 +++--
 Lib/dos-8x3/test_soc.py | 142 +++++++++++++++++++
 Lib/dos-8x3/test_str.py |  21 ++-
 Lib/dos-8x3/test_sun.py |  28 ++++
 Lib/dos-8x3/test_sup.py |   2 +
 Lib/dos-8x3/test_thr.py |  19 ++-
 Lib/dos-8x3/test_tim.py |   4 +-
 Lib/dos_8x3/cgihttps.py |   5 -
 Lib/dos_8x3/formatte.py |   4 +-
 Lib/dos_8x3/posixpat.py |  19 ++-
 Lib/dos_8x3/py_compi.py |   2 +-
 Lib/dos_8x3/test_arr.py |  38 ++++--
 Lib/dos_8x3/test_aud.py | 355 ++++++++++++++++++++++++++++--------------------
 Lib/dos_8x3/test_bin.py |  46 +++++++
 Lib/dos_8x3/test_bsd.py |  69 ++++++++++
 Lib/dos_8x3/test_cma.py |  47 ++++---
 Lib/dos_8x3/test_cry.py |   7 +-
 Lib/dos_8x3/test_err.py |  44 ++++++
 Lib/dos_8x3/test_fcn.py |  28 ++++
 Lib/dos_8x3/test_gdb.py |  34 +++++
 Lib/dos_8x3/test_ima.py | 165 ++++++++++++++++++++++
 Lib/dos_8x3/test_img.py | 110 +++++++++++++++
 Lib/dos_8x3/test_reg.py |  62 +++++++++
 Lib/dos_8x3/test_rgb.py |   3 +-
 Lib/dos_8x3/test_rot.py |  28 ++++
 Lib/dos_8x3/test_sel.py |  40 +++++-
 Lib/dos_8x3/test_sig.py |  33 +++--
 Lib/dos_8x3/test_soc.py | 142 +++++++++++++++++++
 Lib/dos_8x3/test_str.py |  21 ++-
 Lib/dos_8x3/test_sun.py |  28 ++++
 Lib/dos_8x3/test_sup.py |   2 +
 Lib/dos_8x3/test_thr.py |  19 ++-
 Lib/dos_8x3/test_tim.py |   4 +-
 52 files changed, 2276 insertions(+), 434 deletions(-)
 create mode 100644 Lib/dos-8x3/test_bin.py
 create mode 100644 Lib/dos-8x3/test_bsd.py
 create mode 100644 Lib/dos-8x3/test_err.py
 create mode 100644 Lib/dos-8x3/test_fcn.py
 create mode 100644 Lib/dos-8x3/test_gdb.py
 create mode 100644 Lib/dos-8x3/test_ima.py
 create mode 100644 Lib/dos-8x3/test_img.py
 create mode 100644 Lib/dos-8x3/test_reg.py
 create mode 100644 Lib/dos-8x3/test_rot.py
 create mode 100644 Lib/dos-8x3/test_soc.py
 create mode 100644 Lib/dos-8x3/test_sun.py
 create mode 100644 Lib/dos_8x3/test_bin.py
 create mode 100644 Lib/dos_8x3/test_bsd.py
 create mode 100644 Lib/dos_8x3/test_err.py
 create mode 100644 Lib/dos_8x3/test_fcn.py
 create mode 100644 Lib/dos_8x3/test_gdb.py
 create mode 100644 Lib/dos_8x3/test_ima.py
 create mode 100644 Lib/dos_8x3/test_img.py
 create mode 100644 Lib/dos_8x3/test_reg.py
 create mode 100644 Lib/dos_8x3/test_rot.py
 create mode 100644 Lib/dos_8x3/test_soc.py
 create mode 100644 Lib/dos_8x3/test_sun.py

diff --git a/Lib/dos-8x3/cgihttps.py b/Lib/dos-8x3/cgihttps.py
index 837f7c2..85e1721 100755
--- a/Lib/dos-8x3/cgihttps.py
+++ b/Lib/dos-8x3/cgihttps.py
@@ -191,11 +191,6 @@ def executable(path):
 
 def test(HandlerClass = CGIHTTPRequestHandler,
 	 ServerClass = BaseHTTPServer.HTTPServer):
-    import sys
-    if sys.argv[1:2] == ['-r']:
-	db = MyArchive()
-	db.regenindices()
-	return
     SimpleHTTPServer.test(HandlerClass, ServerClass)
 
 
diff --git a/Lib/dos-8x3/formatte.py b/Lib/dos-8x3/formatte.py
index 507ed8a..25dbe73 100755
--- a/Lib/dos-8x3/formatte.py
+++ b/Lib/dos-8x3/formatte.py
@@ -265,9 +265,9 @@ class AbstractFormatter:
 
 
 class NullWriter:
-    """Minimal writer interface to use in testing.
-    """
+    """Minimal writer interface to use in testing & inheritance."""
     def __init__(self): pass
+    def flush(self): pass
     def new_alignment(self, align): pass
     def new_font(self, font): pass
     def new_margin(self, margin, level): pass
diff --git a/Lib/dos-8x3/posixpat.py b/Lib/dos-8x3/posixpat.py
index 014dfe2..965184b 100755
--- a/Lib/dos-8x3/posixpat.py
+++ b/Lib/dos-8x3/posixpat.py
@@ -26,15 +26,20 @@ def isabs(s):
 	return s[:1] == '/'
 
 
-# Join two pathnames.
-# Ignore the first part if the second part is absolute.
+# Join pathnames.
+# Ignore the previous parts if a part is absolute.
 # Insert a '/' unless the first part is empty or already ends in '/'.
 
-def join(a, b):
-	if b[:1] == '/': return b
-	if a == '' or a[-1:] == '/': return a + b
-	# Note: join('x', '') returns 'x/'; is this what we want?
-	return a + '/' + b
+def join(a, *p):
+	path = a
+	for b in p:
+		if b[:1] == '/':
+			path = b
+		elif path == '' or path[-1:] == '/':
+			path = path + b
+		else:
+			path = path + '/' + b
+	return path
 
 
 # Split a path in head (everything up to the last '/') and tail (the
diff --git a/Lib/dos-8x3/py_compi.py b/Lib/dos-8x3/py_compi.py
index fba7b1d..e9e90ff 100755
--- a/Lib/dos-8x3/py_compi.py
+++ b/Lib/dos-8x3/py_compi.py
@@ -19,7 +19,7 @@ def compile(file, cfile = None):
 	timestamp = long(os.stat(file)[8])
 	codeobject = __builtin__.compile(codestring, file, 'exec')
 	if not cfile:
-		cfile = file + 'c'
+		cfile = file + (__debug__ and 'c' or 'o')
 	fc = open(cfile, 'wb')
 	fc.write(MAGIC)
 	wr_long(fc, timestamp)
diff --git a/Lib/dos-8x3/test_arr.py b/Lib/dos-8x3/test_arr.py
index 74fcd45..7474a27 100644
--- a/Lib/dos-8x3/test_arr.py
+++ b/Lib/dos-8x3/test_arr.py
@@ -1,16 +1,26 @@
 #! /usr/bin/env python
 """Test the arraymodule.
-Roger E. Masse
+   Roger E. Masse
 """
 import array
+from test_support import verbose
+
+def main():
+
+    testtype('c', 'c')
+
+    for type in (['b', 'h', 'i', 'l', 'f', 'd']):
+	testtype(type, 1)
+
 
 def testtype(type, example):
 
     
 	a = array.array(type)
 	a.append(example)
-	#print 40*'*'
-	#print 'array after append: ', a
+	if verbose:
+	    print 40*'*'
+	    print 'array after append: ', a
 	a.typecode
 	a.itemsize
 	if a.typecode in ('i', 'b', 'h', 'l'):
@@ -19,22 +29,24 @@ def testtype(type, example):
 	if a.typecode == 'c':
 	    f = open('/etc/passwd', 'r')
 	    a.fromfile(f, 10)
-	    #print 'char array with 10 bytes of /etc/passwd appended: ', a
+	    if verbose:
+		print 'char array with 10 bytes of /etc/passwd appended: ', a
 	    a.fromlist(['a', 'b', 'c'])
-	    #print 'char array with list appended: ', a
+	    if verbose:
+		print 'char array with list appended: ', a
 
 	a.insert(0, example)
-	#print 'array of %s after inserting another:' % a.typecode, a
+	if verbose:
+	    print 'array of %s after inserting another:' % a.typecode, a
 	f = open('/dev/null', 'w')
 	a.tofile(f)
 	a.tolist()
 	a.tostring()
-	#print 'array of %s converted to a list: ' % a.typecode, a.tolist()
-	#print 'array of %s converted to a string: ' % a.typecode, a.tostring()
-
-testtype('c', 'c')
-
-for type in (['b', 'h', 'i', 'l', 'f', 'd']):
-    testtype(type, 1)
+	if verbose:
+	    print 'array of %s converted to a list: ' % a.typecode, a.tolist()
+	if verbose:
+	    print 'array of %s converted to a string: ' \
+	           % a.typecode, a.tostring()
 
+main()
 	
diff --git a/Lib/dos-8x3/test_aud.py b/Lib/dos-8x3/test_aud.py
index 3acf1bf..e966833 100755
--- a/Lib/dos-8x3/test_aud.py
+++ b/Lib/dos-8x3/test_aud.py
@@ -1,202 +1,263 @@
 # Test audioop.
 import audioop
+from test_support import verbose
 
 def gendata1():
-	return '\0\1\2'
+    return '\0\1\2'
 
 def gendata2():
-	if audioop.getsample('\0\1', 2, 0) == 1:
-		return '\0\0\0\1\0\2'
-	else:
-		return '\0\0\1\0\2\0'
+    if verbose:
+	print 'getsample'
+    if audioop.getsample('\0\1', 2, 0) == 1:
+	return '\0\0\0\1\0\2'
+    else:
+	return '\0\0\1\0\2\0'
 
 def gendata4():
-	if audioop.getsample('\0\0\0\1', 4, 0) == 1:
-		return '\0\0\0\0\0\0\0\1\0\0\0\2'
-	else:
-		return '\0\0\0\0\1\0\0\0\2\0\0\0'
+    if verbose:
+	print 'getsample'
+    if audioop.getsample('\0\0\0\1', 4, 0) == 1:
+	return '\0\0\0\0\0\0\0\1\0\0\0\2'
+    else:
+	return '\0\0\0\0\1\0\0\0\2\0\0\0'
 
 def testmax(data):
-	if audioop.max(data[0], 1) <> 2 or \
-		  audioop.max(data[1], 2) <> 2 or \
-		  audioop.max(data[2], 4) <> 2:
-		return 0
-	return 1
+    if verbose:
+	print 'max'
+    if audioop.max(data[0], 1) <> 2 or \
+	      audioop.max(data[1], 2) <> 2 or \
+	      audioop.max(data[2], 4) <> 2:
+	return 0
+    return 1
+
+def testminmax(data):
+    if verbose:
+	print 'minmax'
+    if audioop.minmax(data[0], 1) <> (0, 2) or \
+	      audioop.minmax(data[1], 2) <> (0, 2) or \
+	      audioop.minmax(data[2], 4) <> (0, 2):
+	return 0
+    return 1
 
 def testmaxpp(data):
-	if audioop.maxpp(data[0], 1) <> 0 or \
-		  audioop.maxpp(data[1], 2) <> 0 or \
-		  audioop.maxpp(data[2], 4) <> 0:
-		return 0
-	return 1
+    if verbose:
+	print 'maxpp'
+    if audioop.maxpp(data[0], 1) <> 0 or \
+	      audioop.maxpp(data[1], 2) <> 0 or \
+	      audioop.maxpp(data[2], 4) <> 0:
+	return 0
+    return 1
 
 def testavg(data):
-	if audioop.avg(data[0], 1) <> 1 or \
-		  audioop.avg(data[1], 2) <> 1 or \
-		  audioop.avg(data[2], 4) <> 1:
-		return 0
-	return 1
+    if verbose:
+	print 'avg'
+    if audioop.avg(data[0], 1) <> 1 or \
+	      audioop.avg(data[1], 2) <> 1 or \
+	      audioop.avg(data[2], 4) <> 1:
+	return 0
+    return 1
 
 def testavgpp(data):
-	if audioop.avgpp(data[0], 1) <> 0 or \
-		  audioop.avgpp(data[1], 2) <> 0 or \
-		  audioop.avgpp(data[2], 4) <> 0:
-		return 0
-	return 1
+    if verbose:
+	print 'avgpp'
+    if audioop.avgpp(data[0], 1) <> 0 or \
+	      audioop.avgpp(data[1], 2) <> 0 or \
+	      audioop.avgpp(data[2], 4) <> 0:
+	return 0
+    return 1
 
 def testrms(data):
-	if audioop.rms(data[0], 1) <> 1 or \
-		  audioop.rms(data[1], 2) <> 1 or \
-		  audioop.rms(data[2], 4) <> 1:
-		return 0
-	return 1
+    if audioop.rms(data[0], 1) <> 1 or \
+	      audioop.rms(data[1], 2) <> 1 or \
+	      audioop.rms(data[2], 4) <> 1:
+	return 0
+    return 1
 
 def testcross(data):
-	if audioop.cross(data[0], 1) <> 0 or \
-		  audioop.cross(data[1], 2) <> 0 or \
-		  audioop.cross(data[2], 4) <> 0:
-		return 0
-	return 1
+    if verbose:
+	print 'cross'
+    if audioop.cross(data[0], 1) <> 0 or \
+	      audioop.cross(data[1], 2) <> 0 or \
+	      audioop.cross(data[2], 4) <> 0:
+	return 0
+    return 1
 
 def testadd(data):
-	data2 = []
-	for d in data:
-		str = ''
-		for s in d:
-			str = str + chr(ord(s)*2)
-		data2.append(str)
-	if audioop.add(data[0], data[0], 1) <> data2[0] or \
-		  audioop.add(data[1], data[1], 2) <> data2[1] or \
-		  audioop.add(data[2], data[2], 4) <> data2[2]:
-		return 0
-	return 1
+    if verbose:
+	print 'add'
+    data2 = []
+    for d in data:
+	str = ''
+	for s in d:
+	    str = str + chr(ord(s)*2)
+	data2.append(str)
+    if audioop.add(data[0], data[0], 1) <> data2[0] or \
+	      audioop.add(data[1], data[1], 2) <> data2[1] or \
+	      audioop.add(data[2], data[2], 4) <> data2[2]:
+	return 0
+    return 1
 
 def testbias(data):
-	# Note: this test assumes that avg() works
-	d1 = audioop.bias(data[0], 1, 100)
-	d2 = audioop.bias(data[1], 2, 100)
-	d4 = audioop.bias(data[2], 4, 100)
-	if audioop.avg(d1, 1) <> 101 or \
-		  audioop.avg(d2, 2) <> 101 or \
-		  audioop.avg(d4, 4) <> 101:
-		return 0
-	return 1
+    if verbose:
+	print 'bias'
+    # Note: this test assumes that avg() works
+    d1 = audioop.bias(data[0], 1, 100)
+    d2 = audioop.bias(data[1], 2, 100)
+    d4 = audioop.bias(data[2], 4, 100)
+    if audioop.avg(d1, 1) <> 101 or \
+	      audioop.avg(d2, 2) <> 101 or \
+	      audioop.avg(d4, 4) <> 101:
+	return 0
+    return 1
 
 def testlin2lin(data):
-	# too simple: we test only the size
-	for d1 in data:
-		for d2 in data:
-			got = len(d1)/3
-			wtd = len(d2)/3
-			if len(audioop.lin2lin(d1, got, wtd)) <> len(d2):
-				return 0
-	return 1
+    if verbose:
+	print 'lin2lin'
+    # too simple: we test only the size
+    for d1 in data:
+	for d2 in data:
+	    got = len(d1)/3
+	    wtd = len(d2)/3
+	    if len(audioop.lin2lin(d1, got, wtd)) <> len(d2):
+		return 0
+    return 1
 
 def testadpcm2lin(data):
-	# Very cursory test
-	if audioop.adpcm2lin('\0\0', 1, None) <> ('\0\0\0\0', (0,0)):
-		return 0
-	return 1
+    # Very cursory test
+    if audioop.adpcm2lin('\0\0', 1, None) <> ('\0\0\0\0', (0,0)):
+	return 0
+    return 1
 
 def testlin2adpcm(data):
-	# Very cursory test
-	if audioop.lin2adpcm('\0\0\0\0', 1, None) <> ('\0\0', (0,0)):
-		return 0
-	return 1
+    if verbose:
+	print 'lin2adpcm'
+    # Very cursory test
+    if audioop.lin2adpcm('\0\0\0\0', 1, None) <> ('\0\0', (0,0)):
+	return 0
+    return 1
 
 def testlin2ulaw(data):
-	if audioop.lin2ulaw(data[0], 1) <> '\377\347\333' or \
-		  audioop.lin2ulaw(data[1], 2) <> '\377\377\377' or \
-		  audioop.lin2ulaw(data[2], 4) <> '\377\377\377':
-		return 0
-	return 1
+    if verbose:
+	print 'lin2ulaw'
+    if audioop.lin2ulaw(data[0], 1) <> '\377\347\333' or \
+	      audioop.lin2ulaw(data[1], 2) <> '\377\377\377' or \
+	      audioop.lin2ulaw(data[2], 4) <> '\377\377\377':
+	return 0
+    return 1
 
 def testulaw2lin(data):
-	# Cursory
-	d = audioop.lin2ulaw(data[0], 1)
-	if audioop.ulaw2lin(d, 1) <> data[0]:
-		return 0
-	return 1
+    if verbose:
+	print 'ulaw2lin'
+    # Cursory
+    d = audioop.lin2ulaw(data[0], 1)
+    if audioop.ulaw2lin(d, 1) <> data[0]:
+	return 0
+    return 1
 
 def testmul(data):
-	data2 = []
-	for d in data:
-		str = ''
-		for s in d:
-			str = str + chr(ord(s)*2)
-		data2.append(str)
-	if audioop.mul(data[0], 1, 2) <> data2[0] or \
-		  audioop.mul(data[1],2, 2) <> data2[1] or \
-		  audioop.mul(data[2], 4, 2) <> data2[2]:
-		return 0
-	return 1
+    if verbose:
+	print 'mul'
+    data2 = []
+    for d in data:
+	str = ''
+	for s in d:
+	    str = str + chr(ord(s)*2)
+	data2.append(str)
+    if audioop.mul(data[0], 1, 2) <> data2[0] or \
+	      audioop.mul(data[1],2, 2) <> data2[1] or \
+	      audioop.mul(data[2], 4, 2) <> data2[2]:
+	return 0
+    return 1
+
+def testratecv(data):
+    if verbose:
+	print 'ratecv'
+    state = (-8000, ((256, 512),))
+    if audioop.ratecv(data[0], 1, 1, 8000, 16000, state) != \
+       ('\001\000\000\001\001\002', state):
+	return 0
+    return 1
 
 def testreverse(data):
-	if audioop.reverse(data[0], 1) <> '\2\1\0':
-		return 0
-	return 1
+    if verbose:
+	print 'reverse'
+    if audioop.reverse(data[0], 1) <> '\2\1\0':
+	return 0
+    return 1
 
 def testtomono(data):
-	data2 = ''
-	for d in data[0]:
-		data2 = data2 + d + d
-	if audioop.tomono(data2, 1, 0.5, 0.5) <> data[0]:
-		return 0
-	return 1
+    if verbose:
+	print 'tomono'
+    data2 = ''
+    for d in data[0]:
+	data2 = data2 + d + d
+    if audioop.tomono(data2, 1, 0.5, 0.5) <> data[0]:
+	return 0
+    return 1
 
 def testtostereo(data):
-	data2 = ''
-	for d in data[0]:
-		data2 = data2 + d + d
-	if audioop.tostereo(data[0], 1, 1, 1) <> data2:
-		return 0
-	return 1
+    if verbose:
+	print 'tostereo'
+    data2 = ''
+    for d in data[0]:
+	data2 = data2 + d + d
+    if audioop.tostereo(data[0], 1, 1, 1) <> data2:
+	return 0
+    return 1
 
 def testfindfactor(data):
-	if audioop.findfactor(data[1], data[1]) <> 1.0:
-		return 0
-	return 1
+    if verbose:
+	print 'findfactor'
+    if audioop.findfactor(data[1], data[1]) <> 1.0:
+	return 0
+    return 1
 
 def testfindfit(data):
-	if audioop.findfit(data[1], data[1]) <> (0, 1.0):
-		return 0
-	return 1
+    if verbose:
+	print 'findfit'
+    if audioop.findfit(data[1], data[1]) <> (0, 1.0):
+	return 0
+    return 1
 
 def testfindmax(data):
-	if audioop.findmax(data[1], 1) <> 2:
-		return 0
-	return 1
+    if verbose:
+	print 'findmax'
+    if audioop.findmax(data[1], 1) <> 2:
+	return 0
+    return 1
 
 def testgetsample(data):
-	for i in range(3):
-		if audioop.getsample(data[0], 1, i) <> i or \
-			  audioop.getsample(data[1], 2, i) <> i or \
-			  audioop.getsample(data[2], 4, i) <> i:
-			return 0
-	return 1
+    if verbose:
+	print 'getsample'
+    for i in range(3):
+	if audioop.getsample(data[0], 1, i) <> i or \
+		  audioop.getsample(data[1], 2, i) <> i or \
+		  audioop.getsample(data[2], 4, i) <> i:
+	    return 0
+    return 1
 
 def testone(name, data):
-	try:
-		func = eval('test'+name)
-	except NameError:
-		print 'No test found for audioop.'+name+'()'
-		return
-	try:
-		rv = func(data)
-	except 'xx':
-		print 'Test FAILED for audioop.'+name+'() (with an exception)'
-		return
-	if not rv:
-		print 'Test FAILED for audioop.'+name+'()'
+    try:
+	func = eval('test'+name)
+    except NameError:
+	print 'No test found for audioop.'+name+'()'
+	return
+    try:
+	rv = func(data)
+    except 'xx':
+	print 'Test FAILED for audioop.'+name+'() (with an exception)'
+	return
+    if not rv:
+	print 'Test FAILED for audioop.'+name+'()'
 
 def testall():
-	data = [gendata1(), gendata2(), gendata4()]
-	names = dir(audioop)
-	# We know there is a routine 'add'
-	routines = []
-	for n in names:
-		if type(eval('audioop.'+n)) == type(audioop.add):
-			routines.append(n)
-	for n in routines:
-		testone(n, data)
+    data = [gendata1(), gendata2(), gendata4()]
+    names = dir(audioop)
+    # We know there is a routine 'add'
+    routines = []
+    for n in names:
+	if type(eval('audioop.'+n)) == type(audioop.add):
+	    routines.append(n)
+    for n in routines:
+	testone(n, data)
 testall()
diff --git a/Lib/dos-8x3/test_bin.py b/Lib/dos-8x3/test_bin.py
new file mode 100644
index 0000000..aa156d9
--- /dev/null
+++ b/Lib/dos-8x3/test_bin.py
@@ -0,0 +1,46 @@
+#! /usr/bin/env python
+"""Test script for the binascii C module
+
+   Uses the mechanism of the python binhex module
+   Roger E. Masse
+"""
+import binhex
+import tempfile
+from test_support import verbose
+
+def test():
+
+    try:
+	fname1 = tempfile.mktemp()
+	fname2 = tempfile.mktemp()
+	f = open(fname1, 'w')
+    except:
+	raise ImportError, "Cannot test binascii without a temp file"
+
+    start = 'Jack is my hero'
+    f.write(start)
+    f.close()
+    
+    binhex.binhex(fname1, fname2)
+    if verbose:
+	print 'binhex'
+
+    binhex.hexbin(fname2, fname1)
+    if verbose:
+	print 'hexbin'
+
+    f = open(fname1, 'r')
+    finish = f.readline()
+
+    if start <> finish:
+	print 'Error: binhex <> hexbin'
+    elif verbose:
+	print 'binhex == hexbin'
+
+    try:
+	import os
+	os.unlink(fname1)
+	os.unlink(fname2)
+    except:
+	pass
+test()
diff --git a/Lib/dos-8x3/test_bsd.py b/Lib/dos-8x3/test_bsd.py
new file mode 100644
index 0000000..7a95eb9
--- /dev/null
+++ b/Lib/dos-8x3/test_bsd.py
@@ -0,0 +1,69 @@
+#! /usr/bin/env python
+"""Test script for the bsddb C module
+   Roger E. Masse
+"""
+import bsddb
+import tempfile
+from test_support import verbose
+
+def test(openmethod, what):
+
+    if verbose:
+	print '\nTesting: ', what
+	
+    fname = tempfile.mktemp()
+    f = openmethod(fname, 'c')
+    if verbose:
+	print 'creation...'
+    f['0'] = ''
+    f['a'] = 'Guido'
+    f['b'] = 'van'
+    f['c'] = 'Rossum'
+    f['d'] = 'invented'
+    f['f'] = 'Python'
+    if verbose:
+	print '%s %s %s' % (f['a'], f['b'], f['c'])
+
+    if what == 'BTree' :
+	if verbose:
+	    print 'key ordering...'
+	f.set_location(f.first()[0])
+	while 1:
+	    try:
+		rec = f.next()
+	    except KeyError:
+		if rec <> f.last():
+		    print 'Error, last <> last!'
+		f.previous()
+		break
+	    if verbose:
+		print rec
+	if not f.has_key('a'):
+	    print 'Error, missing key!'
+
+    f.sync()
+    f.close()
+    if verbose:
+	print 'modification...'
+    f = openmethod(fname, 'w')
+    f['d'] = 'discovered'
+
+    if verbose:
+	print 'access...'
+    for key in f.keys():
+	word = f[key]
+	if verbose:
+	    print word
+
+    f.close()
+
+types = [(bsddb.btopen, 'BTree'),
+	 (bsddb.hashopen, 'Hash Table'),
+	 # (bsddb.rnopen,'Record Numbers'), 'put' for RECNO for bsddb 1.85
+         #                                   appears broken... at least on
+	 #                                   Solaris Intel - rmasse 1/97
+	 ]
+
+for type in types:
+    test(type[0], type[1])
+
diff --git a/Lib/dos-8x3/test_cma.py b/Lib/dos-8x3/test_cma.py
index 8c452d7..71e7729 100644
--- a/Lib/dos-8x3/test_cma.py
+++ b/Lib/dos-8x3/test_cma.py
@@ -1,22 +1,35 @@
 #! /usr/bin/env python
 """ Simple test script for cmathmodule.c
-Roger E. Masse
+    Roger E. Masse
 """
 import cmath
+from test_support import verbose
 
-cmath.acos(1.0)
-cmath.acosh(1.0)
-cmath.asin(1.0)
-cmath.asinh(1.0)
-cmath.atan(0.2)
-cmath.atanh(0.3)
-cmath.cos(1.0)
-cmath.cosh(1.0)
-cmath.exp(1.0)
-cmath.log(1.0)
-cmath.log10(1.0)
-cmath.sin(1.0)
-cmath.sinh(1.0)
-cmath.sqrt(1.0)
-cmath.tan(1.0)
-cmath.tanh(1.0)
+testdict = {'acos' : 1.0,
+	    'acosh' : 1.0,
+	    'asin' : 1.0,
+	    'asinh' : 1.0,
+	    'atan' : 0.2,
+	    'atanh' : 0.2,
+	    'cos' : 1.0,
+	    'cosh' : 1.0,
+	    'exp' : 1.0,
+	    'log' : 1.0,
+	    'log10' : 1.0,
+	    'sin' : 1.0,
+	    'sinh' : 1.0,
+	    'sqrt' : 1.0,
+	    'tan' : 1.0,
+	    'tanh' : 1.0}
+
+for func in testdict.keys():
+    f = getattr(cmath, func)
+    r = f(testdict[func])
+    if verbose:
+	print 'Calling %s(%f) = %f' % (func, testdict[func], abs(r))
+
+p = cmath.pi
+e = cmath.e
+if verbose:
+    print 'PI = ', abs(p)
+    print 'E = ', abs(e)
diff --git a/Lib/dos-8x3/test_cry.py b/Lib/dos-8x3/test_cry.py
index 08e6b61..0685c95 100644
--- a/Lib/dos-8x3/test_cry.py
+++ b/Lib/dos-8x3/test_cry.py
@@ -2,5 +2,10 @@
 """Simple test script for cryptmodule.c
    Roger E. Masse
 """
+
+from test_support import verbose    
 import crypt
-print 'Test encryption: ', crypt.crypt('mypassword', 'ab')
+
+c = crypt.crypt('mypassword', 'ab')
+if verbose:
+    print 'Test encryption: ', c
diff --git a/Lib/dos-8x3/test_err.py b/Lib/dos-8x3/test_err.py
new file mode 100644
index 0000000..6951255
--- /dev/null
+++ b/Lib/dos-8x3/test_err.py
@@ -0,0 +1,44 @@
+#! /usr/bin/env python
+"""Test the errno module
+   Roger E. Masse
+"""
+
+import errno
+from test_support import verbose
+
+errors = ['E2BIG', 'EACCES', 'EADDRINUSE', 'EADDRNOTAVAIL', 'EADV',
+	  'EAFNOSUPPORT', 'EAGAIN', 'EALREADY', 'EBADE', 'EBADF',
+	  'EBADFD', 'EBADMSG', 'EBADR', 'EBADRQC', 'EBADSLT',
+	  'EBFONT', 'EBUSY', 'ECHILD', 'ECHRNG', 'ECOMM',
+	  'ECONNABORTED', 'ECONNREFUSED', 'ECONNRESET',
+	  'EDEADLK', 'EDEADLOCK', 'EDESTADDRREQ', 'EDOM',
+	  'EDQUOT', 'EEXIST', 'EFAULT', 'EFBIG', 'EHOSTDOWN',
+	  'EHOSTUNREACH', 'EIDRM', 'EILSEQ', 'EINPROGRESS',
+	  'EINTR', 'EINVAL', 'EIO', 'EISCONN', 'EISDIR',
+	  'EL2HLT', 'EL2NSYNC', 'EL3HLT', 'EL3RST', 'ELIBACC',
+	  'ELIBBAD', 'ELIBEXEC', 'ELIBMAX', 'ELIBSCN', 'ELNRNG',
+	  'ELOOP', 'EMFILE', 'EMLINK', 'EMSGSIZE', 'EMULTIHOP',
+	  'ENAMETOOLONG', 'ENETDOWN', 'ENETRESET', 'ENETUNREACH',
+	  'ENFILE', 'ENOANO', 'ENOBUFS', 'ENOCSI', 'ENODATA',
+	  'ENODEV', 'ENOENT', 'ENOEXEC', 'ENOLCK', 'ENOLINK',
+	  'ENOMEM', 'ENOMSG', 'ENONET', 'ENOPKG', 'ENOPROTOOPT',
+	  'ENOSPC', 'ENOSR', 'ENOSTR', 'ENOSYS', 'ENOTBLK',
+	  'ENOTCONN', 'ENOTDIR', 'ENOTEMPTY', 'ENOTSOCK',
+	  'ENOTTY', 'ENOTUNIQ', 'ENXIO', 'EOPNOTSUPP',
+	  'EOVERFLOW', 'EPERM', 'EPFNOSUPPORT', 'EPIPE',
+	  'EPROTO', 'EPROTONOSUPPORT', 'EPROTOTYPE',
+	  'ERANGE', 'EREMCHG', 'EREMOTE', 'ERESTART',
+	  'EROFS', 'ESHUTDOWN', 'ESOCKTNOSUPPORT', 'ESPIPE',
+	  'ESRCH', 'ESRMNT', 'ESTALE', 'ESTRPIPE', 'ETIME',
+	  'ETIMEDOUT', 'ETOOMANYREFS', 'ETXTBSY', 'EUNATCH',
+	  'EUSERS', 'EWOULDBLOCK', 'EXDEV', 'EXFULL']
+
+#
+# This is is a wee bit bogus since the module only conditionally adds
+# errno constants if they have been defined by errno.h  However, this
+# test seems to work on SGI, Sparc & intel Solaris, and linux.
+#
+for error in errors:
+    a = getattr(errno, error)
+    if verbose:
+	print '%s: %d' % (error, a)
diff --git a/Lib/dos-8x3/test_fcn.py b/Lib/dos-8x3/test_fcn.py
new file mode 100644
index 0000000..4929fbb
--- /dev/null
+++ b/Lib/dos-8x3/test_fcn.py
@@ -0,0 +1,28 @@
+#! /usr/bin/env python
+"""Test program for the fcntl C module.
+   Roger E. Masse
+"""
+import struct
+import fcntl
+import FCNTL
+import os
+from test_support import verbose
+
+filename = '/tmp/delete-me'
+
+# the example from the library docs
+f = open(filename,'w')
+rv = fcntl.fcntl(f.fileno(), FCNTL.O_NDELAY, 1)
+if verbose:
+    print 'Status from fnctl with O_NDELAY: ', rv
+    
+lockdata = struct.pack('hhllhh', FCNTL.F_WRLCK, 0, 0, 0, 0, 0)
+if verbose:
+    print 'struct.pack: ', lockdata
+    
+rv = fcntl.fcntl(f.fileno(), FCNTL.F_SETLKW, lockdata)
+if verbose:
+    print 'String from fcntl with F_SETLKW: ', rv
+
+f.close()
+os.unlink(filename)
diff --git a/Lib/dos-8x3/test_gdb.py b/Lib/dos-8x3/test_gdb.py
new file mode 100644
index 0000000..22db6aa
--- /dev/null
+++ b/Lib/dos-8x3/test_gdb.py
@@ -0,0 +1,34 @@
+#! /usr/bin/env python
+"""Test script for the gdbm module
+   Roger E. Masse
+"""
+    
+import gdbm
+from gdbm import error
+from test_support import verbose
+
+filename= '/tmp/delete_me'
+
+g = gdbm.open(filename, 'c')
+g['a'] = 'b'
+g['12345678910'] = '019237410982340912840198242'
+a = g.keys()
+if verbose:
+    print 'Test gdbm file keys: ', a
+    
+g.has_key('a')
+g.close()
+g = gdbm.open(filename, 'r')
+g.close()
+g = gdbm.open(filename, 'rw')
+g.close()
+g = gdbm.open(filename, 'w')
+g.close()
+g = gdbm.open(filename, 'n')
+g.close()
+
+try:
+    import os
+    os.unlink(filename)
+except:
+    pass
diff --git a/Lib/dos-8x3/test_ima.py b/Lib/dos-8x3/test_ima.py
new file mode 100644
index 0000000..fc8dadf
--- /dev/null
+++ b/Lib/dos-8x3/test_ima.py
@@ -0,0 +1,165 @@
+#! /usr/bin/env python
+"""Test script for the imageop module.  This has the side
+   effect of partially testing the imgfile module as well.
+   Roger E. Masse
+"""
+from test_support import verbose
+
+import imageop
+
+def main(use_rgbimg=1):
+
+    if use_rgbimg:
+	image, width, height = getrgbimage('test.rgb')
+    else:
+	image, width, height = getimage('test.rgb')
+	
+    # Return the selected part of image, which should by width by height
+    # in size and consist of pixels of psize bytes.
+    if verbose:
+	print 'crop'
+    newimage = imageop.crop (image, 4, width, height, 0, 0, 1, 1)
+
+    # Return image scaled to size newwidth by newheight. No interpolation
+    # is done, scaling is done by simple-minded pixel duplication or removal.
+    # Therefore, computer-generated images or dithered images will
+    # not look nice after scaling. 
+    if verbose:
+	print 'scale'
+    scaleimage = imageop.scale(image, 4, width, height, 1, 1)
+
+    # Run a vertical low-pass filter over an image. It does so by computing
+    # each destination pixel as the average of two vertically-aligned source
+    # pixels. The main use of this routine is to forestall excessive flicker
+    # if the image two vertically-aligned source pixels,  hence the name. 
+    if verbose:
+	print 'tovideo'
+    videoimage = imageop.tovideo (image, 4, width, height)
+
+    # Convert an rgb image to an 8 bit rgb
+    if verbose:
+	print 'rgb2rgb8'
+    greyimage = imageop.rgb2rgb8(image, width, height)
+
+    # Convert an 8 bit rgb image to a 24 bit rgb image
+    if verbose:
+	print 'rgb82rgb'
+    image = imageop.rgb82rgb(greyimage, width, height)
+    
+    # Convert an rgb image to an 8 bit greyscale image
+    if verbose:
+	print 'rgb2grey'
+    greyimage = imageop.rgb2grey(image, width, height)
+
+    # Convert an 8 bit greyscale image to a 24 bit rgb image
+    if verbose:
+	print 'grey2rgb'
+    image = imageop.grey2rgb(greyimage, width, height)
+    
+    # Convert a 8-bit deep greyscale image to a 1-bit deep image by
+    # tresholding all the pixels. The resulting image is tightly packed
+    # and is probably only useful as an argument to mono2grey. 
+    if verbose:
+	print 'grey2mono'
+    monoimage = imageop.grey2mono (greyimage, width, height, 0) 
+
+    # monoimage, width, height = getimage('monotest.rgb')
+    # Convert a 1-bit monochrome image to an 8 bit greyscale or color image.
+    # All pixels that are zero-valued on input get value p0 on output and
+    # all one-value input pixels get value p1 on output. To convert a
+    # monochrome  black-and-white image to greyscale pass the values 0 and
+    # 255 respectively.
+    if verbose:
+	print 'mono2grey'
+    greyimage = imageop.mono2grey (monoimage, width, height, 0, 255)
+
+    # Convert an 8-bit greyscale image to a 1-bit monochrome image using a
+    # (simple-minded) dithering algorithm.
+    if verbose:
+	print 'dither2mono'
+    monoimage = imageop.dither2mono (greyimage, width, height)
+
+    # Convert an 8-bit greyscale image to a 4-bit greyscale image without
+    # dithering. 
+    if verbose:
+	print 'grey2grey4'
+    grey4image = imageop.grey2grey4 (greyimage, width, height) 
+
+    # Convert an 8-bit greyscale image to a 2-bit greyscale image without
+    # dithering. 
+    if verbose:
+	print 'grey2grey2'
+    grey2image = imageop.grey2grey2 (greyimage, width, height) 
+
+    # Convert an 8-bit greyscale image to a 2-bit greyscale image with
+    # dithering. As for dither2mono, the dithering algorithm is currently
+    # very simple. 
+    if verbose:
+	print 'dither2grey2'
+    grey2image = imageop.dither2grey2 (greyimage, width, height) 
+
+    # Convert a 4-bit greyscale image to an 8-bit greyscale image. 
+    if verbose:
+	print 'grey42grey'
+    greyimage = imageop.grey42grey (grey4image, width, height) 
+
+    # Convert a 2-bit greyscale image to an 8-bit greyscale image. 
+    if verbose:
+	print 'grey22grey'
+    image = imageop.grey22grey (grey2image, width, height) 
+
+def getrgbimage(name):
+    """return a tuple consisting of image (in 'imgfile' format but
+    using rgbimg instead) width and height"""
+
+    import rgbimg
+
+    try:
+	sizes = rgbimg.sizeofimage(name)
+    except rgbimg.error:
+	name = get_qualified_path(name)
+	sizes = rgbimg.sizeofimage(name)
+    if verbose:
+	print 'rgbimg opening test image: %s, sizes: %s' % (name, str(sizes))
+
+    image = rgbimg.longimagedata(name)
+    return (image, sizes[0], sizes[1])
+  
+def getimage(name):
+    """return a tuple consisting of
+       image (in 'imgfile' format) width and height
+    """
+
+    import imgfile
+  
+    try:
+	sizes = imgfile.getsizes(name)
+    except imgfile.error:
+	name = get_qualified_path(name)
+	sizes = imgfile.getsizes(name)
+    if verbose:
+	print 'imgfile opening test image: %s, sizes: %s' % (name, str(sizes))
+
+    image = imgfile.read(name)
+    return (image, sizes[0], sizes[1])
+
+def get_qualified_path(name):
+    """ return a more qualified path to name contructed from argv[1]"""
+    import sys
+    import os
+    import string
+    
+   # get a more qualified path component of the script...
+    if __name__ == '__main__':
+	ourname = sys.argv[0]
+    else: # ...or the full path of the module
+	ourname = sys.modules[__name__].__file__
+
+    parts = string.splitfields(ourname, os.sep)
+    parts[-1] = name
+    name = string.joinfields(parts, os.sep)
+    return name
+
+# rgbimg (unlike imgfile) is portable to platforms other than SGI.  So we prefer to use it.
+main(use_rgbimg=1)
+
diff --git a/Lib/dos-8x3/test_img.py b/Lib/dos-8x3/test_img.py
new file mode 100644
index 0000000..8a3b91e
--- /dev/null
+++ b/Lib/dos-8x3/test_img.py
@@ -0,0 +1,110 @@
+#! /usr/bin/env python
+"""Simple test script for imgfile.c
+   Roger E. Masse
+"""
+from test_support import verbose
+
+import imgfile
+
+     
+def main():       
+
+    # Test a 3 byte color image
+    testimage('test.rgb')
+    
+    # Test a 1 byte greyscale image
+    testimage('greytest.rgb')
+
+
+def testimage(name):
+    """Run through the imgfile's battery of possible methods
+       on the image passed in name.
+    """
+
+    import sys
+    import os
+    import string
+
+    outputfile = '/tmp/deleteme'
+
+    # try opening the name directly
+    try:
+	# This function returns a tuple (x, y, z) where x and y are the size
+	# of the image in pixels and z is the number of bytes per pixel. Only
+	# 3 byte RGB pixels and 1 byte greyscale pixels are supported.
+	sizes = imgfile.getsizes(name)
+    except imgfile.error:
+	# get a more qualified path component of the script...
+	if __name__ == '__main__':
+	    ourname = sys.argv[0]
+	else: # ...or the full path of the module
+	    ourname = sys.modules[__name__].__file__
+
+	parts = string.splitfields(ourname, os.sep)
+	parts[-1] = name
+	name = string.joinfields(parts, os.sep)
+	sizes = imgfile.getsizes(name)
+    if verbose:
+	print 'Opening test image: %s, sizes: %s' % (name, str(sizes))
+    # This function reads and decodes the image on the specified file,
+    # and returns it as a python string. The string has either 1 byte
+    # greyscale pixels or 4 byte RGBA pixels. The bottom left pixel
+    # is the first in the string. This format is suitable to pass
+    # to gl.lrectwrite, for instance. 
+    image = imgfile.read(name)
+    
+    # This function writes the RGB or greyscale data in data to
+    # image file file. x and y give the size of the image, z is
+    # 1 for 1 byte greyscale images or 3 for RGB images (which
+    # are stored as 4 byte values of which only the lower three
+    # bytes are used). These are the formats returned by gl.lrectread. 
+    if verbose:
+	print 'Writing output file'
+    imgfile.write (outputfile, image, sizes[0], sizes[1], sizes[2]) 
+   
+
+    if verbose:
+	print 'Opening scaled test image: %s, sizes: %s' % (name, str(sizes))
+    # This function is identical to read but it returns an image that
+    # is scaled to the given x and y sizes. If the filter and blur
+    # parameters are omitted scaling is done by simply dropping
+    # or duplicating pixels, so the result will be less than perfect,
+    # especially for computer-generated images.  Alternatively,
+    # you can specify a filter to use to smoothen the image after
+    # scaling. The filter forms supported are 'impulse', 'box',
+    # 'triangle', 'quadratic' and 'gaussian'. If a filter is
+    # specified blur is an optional parameter specifying the
+    # blurriness of the filter. It defaults to 1.0.  readscaled
+    # makes no attempt to keep the aspect ratio correct, so that
+    # is the users' responsibility.
+    if verbose:
+	print 'Filtering with "impulse"'
+    simage = imgfile.readscaled (name, sizes[0]/2, sizes[1]/2, 'impulse', 2.0)
+
+    # This function sets a global flag which defines whether the
+    # scan lines of the image are read or written from bottom to
+    # top (flag is zero, compatible with SGI GL) or from top to
+    # bottom(flag is one, compatible with X). The default is zero. 
+    if verbose:
+	print 'Switching to X compatibility'
+    imgfile.ttob (1) 
+
+    if verbose:
+	print 'Filtering with "triangle"'
+    simage = imgfile.readscaled (name, sizes[0]/2, sizes[1]/2, 'triangle', 3.0)
+    if verbose:
+	print 'Switching back to SGI compatibility'
+    imgfile.ttob (0) 
+    
+    if verbose: print 'Filtering with "quadratic"'
+    simage = imgfile.readscaled (name, sizes[0]/2, sizes[1]/2, 'quadratic')
+    if verbose: print 'Filtering with "gaussian"'
+    simage = imgfile.readscaled (name, sizes[0]/2, sizes[1]/2, 'gaussian', 1.0)
+
+    if verbose:
+	print 'Writing output file'
+    imgfile.write (outputfile, simage, sizes[0]/2, sizes[1]/2, sizes[2]) 
+
+    os.unlink(outputfile)
+
+main()
diff --git a/Lib/dos-8x3/test_reg.py b/Lib/dos-8x3/test_reg.py
new file mode 100644
index 0000000..9d25d92
--- /dev/null
+++ b/Lib/dos-8x3/test_reg.py
@@ -0,0 +1,62 @@
+from test_support import verbose
+import regex
+from regex_syntax import *
+
+re = 'a+b+c+'
+print 'no match:', regex.match(re, 'hello aaaabcccc world')
+print 'successful search:', regex.search(re, 'hello aaaabcccc world')
+try:
+    cre = regex.compile('\(' + re)
+except regex.error:
+    print 'caught expected exception'
+else:
+    print 'expected regex.error not raised'
+
+print 'failed awk syntax:', regex.search('(a+)|(b+)', 'cdb')
+prev = regex.set_syntax(RE_SYNTAX_AWK)
+print 'successful awk syntax:', regex.search('(a+)|(b+)', 'cdb')
+regex.set_syntax(prev)
+print 'failed awk syntax:', regex.search('(a+)|(b+)', 'cdb')
+
+re = '\(<one>[0-9]+\) *\(<two>[0-9]+\)'
+print 'matching with group names and compile()'
+cre = regex.compile(re)
+print cre.match('801 999')
+try:
+    print cre.group('one')
+except regex.error:
+    print 'caught expected exception'
+else:
+    print 'expected regex.error not raised'
+
+print 'matching with group names and symcomp()'
+cre = regex.symcomp(re)
+print cre.match('801 999')
+print cre.group(0)
+print cre.group('one')
+print cre.group(1, 2)
+print cre.group('one', 'two')
+print 'realpat:', cre.realpat
+print 'groupindex:', cre.groupindex
+
+re = 'world'
+cre = regex.compile(re)
+print 'not case folded search:', cre.search('HELLO WORLD')
+cre = regex.compile(re, regex.casefold)
+print 'case folded search:', cre.search('HELLO WORLD')
+
+print '__members__:', cre.__members__
+print 'regs:', cre.regs
+print 'last:', cre.last
+print 'translate:', `cre.translate`
+print 'givenpat:', cre.givenpat
+
+print 'match with pos:', cre.match('hello world', 7)
+print 'search with pos:', cre.search('hello world there world', 7)
+print 'bogus group:', cre.group(0, 1, 3)
+try:
+    print 'no name:', cre.group('one')
+except regex.error:
+    print 'caught expected exception'
+else:
+    print 'expected regex.error not raised'
diff --git a/Lib/dos-8x3/test_rgb.py b/Lib/dos-8x3/test_rgb.py
index cdadc66..52814b4 100755
--- a/Lib/dos-8x3/test_rgb.py
+++ b/Lib/dos-8x3/test_rgb.py
@@ -23,7 +23,8 @@ def testimg(rgb_file, raw_file):
 		raise error, 'bad image length'
 	raw = open(raw_file, 'r').read()
 	if rgb != raw:
-		raise error, 'images don\'t match for '+rgb_file+' and '+raw_file
+		raise error, \
+		      'images don\'t match for '+rgb_file+' and '+raw_file
 	for depth in [1, 3, 4]:
 		rgbimg.longstoimage(rgb, width, height, depth, '@.rgb')
 	os.unlink('@.rgb')
diff --git a/Lib/dos-8x3/test_rot.py b/Lib/dos-8x3/test_rot.py
new file mode 100644
index 0000000..338ea9d
--- /dev/null
+++ b/Lib/dos-8x3/test_rot.py
@@ -0,0 +1,28 @@
+import rotor
+
+r = rotor.newrotor("you'll never guess this")
+r = rotor.newrotor("you'll never guess this", 12)
+
+A = 'spam and eggs'
+B = 'cheese shop'
+
+a = r.encrypt(A)
+print a
+b = r.encryptmore(B)
+print b
+
+A1 = r.decrypt(a)
+print A1
+if A1 <> A:
+    print 'decrypt failed'
+
+B1 = r.decryptmore(b)
+print B1
+if B1 <> B:
+    print 'decryptmore failed'
+
+try:
+    r.setkey()
+except TypeError:
+    pass
+r.setkey('you guessed it!')
diff --git a/Lib/dos-8x3/test_sel.py b/Lib/dos-8x3/test_sel.py
index f185308..f7f20f3 100755
--- a/Lib/dos-8x3/test_sel.py
+++ b/Lib/dos-8x3/test_sel.py
@@ -1,14 +1,44 @@
 # Testing select module
+import select
+import os
+
+# test some known error conditions
+try:
+    rfd, wfd, xfd = select.select(1, 2, 3)
+except TypeError:
+    pass
+else:
+    print 'expected TypeError exception not raised'
+
+class Nope:
+    pass
+
+class Almost:
+    def fileno(self):
+	return 'fileno'
+    
+try:
+    rfd, wfd, xfd = select.select([Nope()], [], [])
+except TypeError:
+    pass
+else:
+    print 'expected TypeError exception not raised'
+
+try:
+    rfd, wfd, xfd = select.select([Almost()], [], [])
+except TypeError:
+    pass
+else:
+    print 'expected TypeError exception not raised'
+
 
 def test():
-	import select
-	import os
-	cmd = 'for i in 0 1 2 3 4 5 6 7 8 9; do date; sleep 3; done'
+	cmd = 'for i in 0 1 2 3 4 5 6 7 8 9; do echo testing...; sleep 1; done'
 	p = os.popen(cmd, 'r')
 	for tout in (0, 1, 2, 4, 8, 16) + (None,)*10:
 		print 'timeout =', tout
 		rfd, wfd, xfd = select.select([p], [], [], tout)
-		print rfd, wfd, xfd
+## 		print rfd, wfd, xfd
 		if (rfd, wfd, xfd) == ([], [], []):
 			continue
 		if (rfd, wfd, xfd) == ([p], [], []):
@@ -19,5 +49,7 @@ def test():
 				break
 			continue
 		print 'Heh?'
+	p.close()
 
 test()
+
diff --git a/Lib/dos-8x3/test_sig.py b/Lib/dos-8x3/test_sig.py
index bfcf517..3619b96 100755
--- a/Lib/dos-8x3/test_sig.py
+++ b/Lib/dos-8x3/test_sig.py
@@ -1,31 +1,37 @@
 # Test the signal module
-
+from test_support import verbose
 import signal
 import os
 
 
+if verbose:
+	x = '-x'
+else:
+	x = '+x'
 pid = os.getpid()
 
 # Shell script that will send us asynchronous signals
 script = """
-(
-	set -x
+ (
+	set %(x)s
 	sleep 2
 	kill -5 %(pid)d
 	sleep 2
 	kill -2 %(pid)d
 	sleep 2
 	kill -3 %(pid)d
-) &
+ ) &
 """ % vars()
 
 def handlerA(*args):
-	print "handlerA", args
+	if verbose:
+		print "handlerA", args
 
 HandlerBCalled = "HandlerBCalled"	# Exception
 
 def handlerB(*args):
-	print "handlerB", args
+	if verbose:
+		print "handlerB", args
 	raise HandlerBCalled, args
 
 signal.alarm(20)			# Entire test lasts at most 20 sec.
@@ -40,11 +46,18 @@ print "starting pause() loop..."
 
 try:
 	while 1:
-		print "call pause()..."
+		if verbose:
+			print "call pause()..."
 		try:
 			signal.pause()
-			print "pause() returned"
+			if verbose:
+				print "pause() returned"
 		except HandlerBCalled:
-			print "HandlerBCalled exception caught"
+			if verbose:
+				print "HandlerBCalled exception caught"
+			else:
+				pass
+				
 except KeyboardInterrupt:
-	print "KeyboardInterrupt (assume the alarm() went off)"
+	if verbose:
+		print "KeyboardInterrupt (assume the alarm() went off)"
diff --git a/Lib/dos-8x3/test_soc.py b/Lib/dos-8x3/test_soc.py
new file mode 100644
index 0000000..1e157b9
--- /dev/null
+++ b/Lib/dos-8x3/test_soc.py
@@ -0,0 +1,142 @@
+# Not tested:
+#	socket.fromfd()
+# 	sktobj.getsockopt()
+#	sktobj.recvfrom()
+#	sktobj.sendto()
+#	sktobj.setblocking()
+# 	sktobj.setsockopt()
+#	sktobj.shutdown()
+
+
+from test_support import verbose
+import socket
+import os
+import time
+import string
+
+def missing_ok(str):
+    try:
+	getattr(socket, str)
+    except AttributeError:
+	pass
+
+print socket.error
+
+print socket.AF_INET
+
+print socket.SOCK_STREAM
+print socket.SOCK_DGRAM
+print socket.SOCK_RAW
+print socket.SOCK_RDM
+print socket.SOCK_SEQPACKET
+
+for optional in ("AF_UNIX",
+
+		 "SO_DEBUG", "SO_ACCEPTCONN", "SO_REUSEADDR", "SO_KEEPALIVE",
+		 "SO_DONTROUTE", "SO_BROADCAST", "SO_USELOOPBACK", "SO_LINGER",
+		 "SO_OOBINLINE", "SO_REUSEPORT", "SO_SNDBUF", "SO_RCVBUF",
+		 "SO_SNDLOWAT", "SO_RCVLOWAT", "SO_SNDTIMEO", "SO_RCVTIMEO",
+		 "SO_ERROR", "SO_TYPE", "SOMAXCONN",
+
+		 "MSG_OOB", "MSG_PEEK", "MSG_DONTROUTE", "MSG_EOR",
+		 "MSG_TRUNC", "MSG_CTRUNC", "MSG_WAITALL", "MSG_BTAG",
+		 "MSG_ETAG",
+
+		 "SOL_SOCKET",
+
+		 "IPPROTO_IP", "IPPROTO_ICMP", "IPPROTO_IGMP",
+		 "IPPROTO_GGP", "IPPROTO_TCP", "IPPROTO_EGP",
+		 "IPPROTO_PUP", "IPPROTO_UDP", "IPPROTO_IDP",
+		 "IPPROTO_HELLO", "IPPROTO_ND", "IPPROTO_TP",
+		 "IPPROTO_XTP", "IPPROTO_EON", "IPPROTO_BIP",
+		 "IPPROTO_RAW", "IPPROTO_MAX",
+
+		 "IPPORT_RESERVED", "IPPORT_USERRESERVED",
+
+		 "INADDR_ANY", "INADDR_BROADCAST", "INADDR_LOOPBACK",
+		 "INADDR_UNSPEC_GROUP", "INADDR_ALLHOSTS_GROUP",
+		 "INADDR_MAX_LOCAL_GROUP", "INADDR_NONE",
+
+		 "IP_OPTIONS", "IP_HDRINCL", "IP_TOS", "IP_TTL",
+		 "IP_RECVOPTS", "IP_RECVRETOPTS", "IP_RECVDSTADDR",
+		 "IP_RETOPTS", "IP_MULTICAST_IF", "IP_MULTICAST_TTL",
+		 "IP_MULTICAST_LOOP", "IP_ADD_MEMBERSHIP",
+		 "IP_DROP_MEMBERSHIP",
+		 ):
+    missing_ok(optional)
+
+hostname = socket.gethostname()
+ip = socket.gethostbyname(hostname)
+hname, aliases, ipaddrs = socket.gethostbyaddr(ip)
+all_host_names = [hname] + aliases
+
+if verbose:
+    print hostname
+    print ip
+    print hname, aliases, ipaddrs
+    print all_host_names
+
+for name in all_host_names:
+    if string.find(name, '.'):
+	break
+else:
+    print 'FQDN not found'
+
+print socket.getservbyname('telnet', 'tcp')
+try:
+    socket.getservbyname('telnet', 'udp')
+except socket.error:
+    pass
+
+
+try:
+    PORT = 50007
+    if os.fork():
+	# parent is server
+	s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+	s.bind(hostname, PORT)
+	s.listen(1)
+	if verbose:
+	    print 'parent accepting'
+	conn, addr = s.accept()
+	if verbose:
+	    print 'connected by', addr
+	# couple of interesting tests while we've got a live socket
+	f = conn.fileno()
+	if verbose:
+	    print 'fileno:', f
+	p = conn.getpeername()
+	if verbose:
+	    print 'peer:', p
+	n = conn.getsockname()
+	if verbose:
+	    print 'sockname:', n
+	f = conn.makefile()
+	if verbose:
+	    print 'file obj:', f
+	while 1:
+	    data = conn.recv(1024)
+	    if not data:
+		break
+	    if verbose:
+		print 'received:', data
+	    conn.send(data)
+	conn.close()
+    else:
+	try:
+	    # child is client
+	    time.sleep(1)
+	    s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+	    if verbose:
+		print 'child connecting'
+	    s.connect(hostname, PORT)
+	    msg = 'socket test'
+	    s.send(msg)
+	    data = s.recv(1024)
+	    if msg <> data:
+		print 'parent/client mismatch'
+	    s.close()
+	finally:
+	    os._exit(1)
+except socket.error:
+    pass
diff --git a/Lib/dos-8x3/test_str.py b/Lib/dos-8x3/test_str.py
index 424cf52..efc98ff 100644
--- a/Lib/dos-8x3/test_str.py
+++ b/Lib/dos-8x3/test_str.py
@@ -1,13 +1,21 @@
+from test_support import verbose
 import strop, sys
 
 def test(name, input, output, *args):
+    if verbose:
+	print 'string.%s%s =? %s... ' % (name, (input,) + args, output),
     f = getattr(strop, name)
     try:
 	value = apply(f, (input,) + args)
     except:
 	 value = sys.exc_type
     if value != output:
+	if verbose:
+	    print 'no'
 	print f, `input`, `output`, `value`
+    else:
+	if verbose:
+	    print 'yes'
 
 test('atoi', " 1 ", 1)
 test('atoi', " 1x", ValueError)
@@ -38,8 +46,19 @@ test('split', 'this is the split function',
 test('split', 'a|b|c|d', ['a', 'b', 'c', 'd'], '|')
 test('split', 'a|b|c|d', ['a', 'b', 'c|d'], '|', 2)
 
+# join now works with any sequence type
+class Sequence:
+    def __init__(self): self.seq = 'wxyz'
+    def __len__(self): return len(self.seq)
+    def __getitem__(self, i): return self.seq[i]
+
 test('join', ['a', 'b', 'c', 'd'], 'a b c d')
-test('join', ['a', 'b', 'c', 'd'], 'abcd', '')
+test('join', ('a', 'b', 'c', 'd'), 'abcd', '')
+test('join', Sequence(), 'w x y z')
+
+# try a few long ones
+print strop.join(['x' * 100] * 100, ':')
+print strop.join(('x' * 100,) * 100, ':')
 
 test('strip', '   hello   ', 'hello')
 test('lstrip', '   hello   ', 'hello   ')
diff --git a/Lib/dos-8x3/test_sun.py b/Lib/dos-8x3/test_sun.py
new file mode 100644
index 0000000..aa85752
--- /dev/null
+++ b/Lib/dos-8x3/test_sun.py
@@ -0,0 +1,28 @@
+from test_support import verbose, TestFailed
+import sunaudiodev
+import os
+
+def findfile(file):
+	if os.path.isabs(file): return file
+	import sys
+	for dn in sys.path:
+		fn = os.path.join(dn, file)
+		if os.path.exists(fn): return fn
+	return file
+
+def play_sound_file(path):
+    fp = open(path, 'r')
+    data = fp.read()
+    fp.close()
+    try:
+	a = sunaudiodev.open('w')
+    except sunaudiodev.error, msg:
+	raise TestFailed, msg
+    else:
+	a.write(data)
+	a.close()
+
+def test():
+    play_sound_file(findfile('audiotest.au'))
+
+test()
diff --git a/Lib/dos-8x3/test_sup.py b/Lib/dos-8x3/test_sup.py
index 7a76664..7dc1940 100755
--- a/Lib/dos-8x3/test_sup.py
+++ b/Lib/dos-8x3/test_sup.py
@@ -2,6 +2,8 @@
 
 TestFailed = 'test_support -- test failed'	# Exception
 
+verbose = 1				# Flag set to 0 by regrtest.py
+
 def unload(name):
 	import sys
 	try:
diff --git a/Lib/dos-8x3/test_thr.py b/Lib/dos-8x3/test_thr.py
index 4e0eb70..8a1f435 100755
--- a/Lib/dos-8x3/test_thr.py
+++ b/Lib/dos-8x3/test_thr.py
@@ -2,6 +2,7 @@
 
 # Create a bunch of threads, let each do some work, wait until all are done
 
+from test_support import verbose
 import whrandom
 import thread
 import time
@@ -19,9 +20,11 @@ def task(ident):
 	whmutex.acquire()
 	delay = whrandom.random() * numtasks
 	whmutex.release()
-	print 'task', ident, 'will run for', delay, 'sec'
+	if verbose:
+	    print 'task', ident, 'will run for', delay, 'sec'
 	time.sleep(delay)
-	print 'task', ident, 'done'
+	if verbose:
+	    print 'task', ident, 'done'
 	mutex.acquire()
 	running = running - 1
 	if running == 0:
@@ -33,7 +36,8 @@ def newtask():
 	global next_ident, running
 	mutex.acquire()
 	next_ident = next_ident + 1
-	print 'creating task', next_ident
+	if verbose:
+	    print 'creating task', next_ident
 	thread.start_new_thread(task, (next_ident,))
 	running = running + 1
 	mutex.release()
@@ -84,11 +88,14 @@ def task2(ident):
 			whmutex.acquire()
 			delay = whrandom.random() * numtasks
 			whmutex.release()
-		print 'task', ident, 'will run for', delay, 'sec'
+		if verbose:
+		    print 'task', ident, 'will run for', delay, 'sec'
 		time.sleep(delay)
-		print 'task', ident, 'entering barrier', i
+		if verbose:
+		    print 'task', ident, 'entering barrier', i
 		bar.enter()
-		print 'task', ident, 'leaving barrier', i
+		if verbose:
+		    print 'task', ident, 'leaving barrier', i
 	mutex.acquire()
 	running = running - 1
 	if running == 0:
diff --git a/Lib/dos-8x3/test_tim.py b/Lib/dos-8x3/test_tim.py
index bfc768a..85ea6ee 100644
--- a/Lib/dos-8x3/test_tim.py
+++ b/Lib/dos-8x3/test_tim.py
@@ -13,8 +13,8 @@ if int(time.mktime(time.localtime(t))) <> int(t):
 
 time.sleep(1.2)
 tt = time.gmtime(t)
-for directive in ('a', 'A', 'b', 'B', 'c', 'd', 'E', 'H', 'I',
-		  'j', 'm', 'M', 'n', 'N', 'o', 'p', 'S', 't',
+for directive in ('a', 'A', 'b', 'B', 'c', 'd', 'H', 'I',
+		  'j', 'm', 'M', 'p', 'S',
 		  'U', 'w', 'W', 'x', 'X', 'y', 'Y', 'Z', '%'):
     format = '%' + directive
     time.strftime(format, tt)
diff --git a/Lib/dos_8x3/cgihttps.py b/Lib/dos_8x3/cgihttps.py
index 837f7c2..85e1721 100755
--- a/Lib/dos_8x3/cgihttps.py
+++ b/Lib/dos_8x3/cgihttps.py
@@ -191,11 +191,6 @@ def executable(path):
 
 def test(HandlerClass = CGIHTTPRequestHandler,
 	 ServerClass = BaseHTTPServer.HTTPServer):
-    import sys
-    if sys.argv[1:2] == ['-r']:
-	db = MyArchive()
-	db.regenindices()
-	return
     SimpleHTTPServer.test(HandlerClass, ServerClass)
 
 
diff --git a/Lib/dos_8x3/formatte.py b/Lib/dos_8x3/formatte.py
index 507ed8a..25dbe73 100755
--- a/Lib/dos_8x3/formatte.py
+++ b/Lib/dos_8x3/formatte.py
@@ -265,9 +265,9 @@ class AbstractFormatter:
 
 
 class NullWriter:
-    """Minimal writer interface to use in testing.
-    """
+    """Minimal writer interface to use in testing & inheritance."""
     def __init__(self): pass
+    def flush(self): pass
     def new_alignment(self, align): pass
     def new_font(self, font): pass
     def new_margin(self, margin, level): pass
diff --git a/Lib/dos_8x3/posixpat.py b/Lib/dos_8x3/posixpat.py
index 014dfe2..965184b 100755
--- a/Lib/dos_8x3/posixpat.py
+++ b/Lib/dos_8x3/posixpat.py
@@ -26,15 +26,20 @@ def isabs(s):
 	return s[:1] == '/'
 
 
-# Join two pathnames.
-# Ignore the first part if the second part is absolute.
+# Join pathnames.
+# Ignore the previous parts if a part is absolute.
 # Insert a '/' unless the first part is empty or already ends in '/'.
 
-def join(a, b):
-	if b[:1] == '/': return b
-	if a == '' or a[-1:] == '/': return a + b
-	# Note: join('x', '') returns 'x/'; is this what we want?
-	return a + '/' + b
+def join(a, *p):
+	path = a
+	for b in p:
+		if b[:1] == '/':
+			path = b
+		elif path == '' or path[-1:] == '/':
+			path = path + b
+		else:
+			path = path + '/' + b
+	return path
 
 
 # Split a path in head (everything up to the last '/') and tail (the
diff --git a/Lib/dos_8x3/py_compi.py b/Lib/dos_8x3/py_compi.py
index fba7b1d..e9e90ff 100755
--- a/Lib/dos_8x3/py_compi.py
+++ b/Lib/dos_8x3/py_compi.py
@@ -19,7 +19,7 @@ def compile(file, cfile = None):
 	timestamp = long(os.stat(file)[8])
 	codeobject = __builtin__.compile(codestring, file, 'exec')
 	if not cfile:
-		cfile = file + 'c'
+		cfile = file + (__debug__ and 'c' or 'o')
 	fc = open(cfile, 'wb')
 	fc.write(MAGIC)
 	wr_long(fc, timestamp)
diff --git a/Lib/dos_8x3/test_arr.py b/Lib/dos_8x3/test_arr.py
index 74fcd45..7474a27 100644
--- a/Lib/dos_8x3/test_arr.py
+++ b/Lib/dos_8x3/test_arr.py
@@ -1,16 +1,26 @@
 #! /usr/bin/env python
 """Test the arraymodule.
-Roger E. Masse
+   Roger E. Masse
 """
 import array
+from test_support import verbose
+
+def main():
+
+    testtype('c', 'c')
+
+    for type in (['b', 'h', 'i', 'l', 'f', 'd']):
+	testtype(type, 1)
+
 
 def testtype(type, example):
 
     
 	a = array.array(type)
 	a.append(example)
-	#print 40*'*'
-	#print 'array after append: ', a
+	if verbose:
+	    print 40*'*'
+	    print 'array after append: ', a
 	a.typecode
 	a.itemsize
 	if a.typecode in ('i', 'b', 'h', 'l'):
@@ -19,22 +29,24 @@ def testtype(type, example):
 	if a.typecode == 'c':
 	    f = open('/etc/passwd', 'r')
 	    a.fromfile(f, 10)
-	    #print 'char array with 10 bytes of /etc/passwd appended: ', a
+	    if verbose:
+		print 'char array with 10 bytes of /etc/passwd appended: ', a
 	    a.fromlist(['a', 'b', 'c'])
-	    #print 'char array with list appended: ', a
+	    if verbose:
+		print 'char array with list appended: ', a
 
 	a.insert(0, example)
-	#print 'array of %s after inserting another:' % a.typecode, a
+	if verbose:
+	    print 'array of %s after inserting another:' % a.typecode, a
 	f = open('/dev/null', 'w')
 	a.tofile(f)
 	a.tolist()
 	a.tostring()
-	#print 'array of %s converted to a list: ' % a.typecode, a.tolist()
-	#print 'array of %s converted to a string: ' % a.typecode, a.tostring()
-
-testtype('c', 'c')
-
-for type in (['b', 'h', 'i', 'l', 'f', 'd']):
-    testtype(type, 1)
+	if verbose:
+	    print 'array of %s converted to a list: ' % a.typecode, a.tolist()
+	if verbose:
+	    print 'array of %s converted to a string: ' \
+	           % a.typecode, a.tostring()
 
+main()
 	
diff --git a/Lib/dos_8x3/test_aud.py b/Lib/dos_8x3/test_aud.py
index 3acf1bf..e966833 100755
--- a/Lib/dos_8x3/test_aud.py
+++ b/Lib/dos_8x3/test_aud.py
@@ -1,202 +1,263 @@
 # Test audioop.
 import audioop
+from test_support import verbose
 
 def gendata1():
-	return '\0\1\2'
+    return '\0\1\2'
 
 def gendata2():
-	if audioop.getsample('\0\1', 2, 0) == 1:
-		return '\0\0\0\1\0\2'
-	else:
-		return '\0\0\1\0\2\0'
+    if verbose:
+	print 'getsample'
+    if audioop.getsample('\0\1', 2, 0) == 1:
+	return '\0\0\0\1\0\2'
+    else:
+	return '\0\0\1\0\2\0'
 
 def gendata4():
-	if audioop.getsample('\0\0\0\1', 4, 0) == 1:
-		return '\0\0\0\0\0\0\0\1\0\0\0\2'
-	else:
-		return '\0\0\0\0\1\0\0\0\2\0\0\0'
+    if verbose:
+	print 'getsample'
+    if audioop.getsample('\0\0\0\1', 4, 0) == 1:
+	return '\0\0\0\0\0\0\0\1\0\0\0\2'
+    else:
+	return '\0\0\0\0\1\0\0\0\2\0\0\0'
 
 def testmax(data):
-	if audioop.max(data[0], 1) <> 2 or \
-		  audioop.max(data[1], 2) <> 2 or \
-		  audioop.max(data[2], 4) <> 2:
-		return 0
-	return 1
+    if verbose:
+	print 'max'
+    if audioop.max(data[0], 1) <> 2 or \
+	      audioop.max(data[1], 2) <> 2 or \
+	      audioop.max(data[2], 4) <> 2:
+	return 0
+    return 1
+
+def testminmax(data):
+    if verbose:
+	print 'minmax'
+    if audioop.minmax(data[0], 1) <> (0, 2) or \
+	      audioop.minmax(data[1], 2) <> (0, 2) or \
+	      audioop.minmax(data[2], 4) <> (0, 2):
+	return 0
+    return 1
 
 def testmaxpp(data):
-	if audioop.maxpp(data[0], 1) <> 0 or \
-		  audioop.maxpp(data[1], 2) <> 0 or \
-		  audioop.maxpp(data[2], 4) <> 0:
-		return 0
-	return 1
+    if verbose:
+	print 'maxpp'
+    if audioop.maxpp(data[0], 1) <> 0 or \
+	      audioop.maxpp(data[1], 2) <> 0 or \
+	      audioop.maxpp(data[2], 4) <> 0:
+	return 0
+    return 1
 
 def testavg(data):
-	if audioop.avg(data[0], 1) <> 1 or \
-		  audioop.avg(data[1], 2) <> 1 or \
-		  audioop.avg(data[2], 4) <> 1:
-		return 0
-	return 1
+    if verbose:
+	print 'avg'
+    if audioop.avg(data[0], 1) <> 1 or \
+	      audioop.avg(data[1], 2) <> 1 or \
+	      audioop.avg(data[2], 4) <> 1:
+	return 0
+    return 1
 
 def testavgpp(data):
-	if audioop.avgpp(data[0], 1) <> 0 or \
-		  audioop.avgpp(data[1], 2) <> 0 or \
-		  audioop.avgpp(data[2], 4) <> 0:
-		return 0
-	return 1
+    if verbose:
+	print 'avgpp'
+    if audioop.avgpp(data[0], 1) <> 0 or \
+	      audioop.avgpp(data[1], 2) <> 0 or \
+	      audioop.avgpp(data[2], 4) <> 0:
+	return 0
+    return 1
 
 def testrms(data):
-	if audioop.rms(data[0], 1) <> 1 or \
-		  audioop.rms(data[1], 2) <> 1 or \
-		  audioop.rms(data[2], 4) <> 1:
-		return 0
-	return 1
+    if audioop.rms(data[0], 1) <> 1 or \
+	      audioop.rms(data[1], 2) <> 1 or \
+	      audioop.rms(data[2], 4) <> 1:
+	return 0
+    return 1
 
 def testcross(data):
-	if audioop.cross(data[0], 1) <> 0 or \
-		  audioop.cross(data[1], 2) <> 0 or \
-		  audioop.cross(data[2], 4) <> 0:
-		return 0
-	return 1
+    if verbose:
+	print 'cross'
+    if audioop.cross(data[0], 1) <> 0 or \
+	      audioop.cross(data[1], 2) <> 0 or \
+	      audioop.cross(data[2], 4) <> 0:
+	return 0
+    return 1
 
 def testadd(data):
-	data2 = []
-	for d in data:
-		str = ''
-		for s in d:
-			str = str + chr(ord(s)*2)
-		data2.append(str)
-	if audioop.add(data[0], data[0], 1) <> data2[0] or \
-		  audioop.add(data[1], data[1], 2) <> data2[1] or \
-		  audioop.add(data[2], data[2], 4) <> data2[2]:
-		return 0
-	return 1
+    if verbose:
+	print 'add'
+    data2 = []
+    for d in data:
+	str = ''
+	for s in d:
+	    str = str + chr(ord(s)*2)
+	data2.append(str)
+    if audioop.add(data[0], data[0], 1) <> data2[0] or \
+	      audioop.add(data[1], data[1], 2) <> data2[1] or \
+	      audioop.add(data[2], data[2], 4) <> data2[2]:
+	return 0
+    return 1
 
 def testbias(data):
-	# Note: this test assumes that avg() works
-	d1 = audioop.bias(data[0], 1, 100)
-	d2 = audioop.bias(data[1], 2, 100)
-	d4 = audioop.bias(data[2], 4, 100)
-	if audioop.avg(d1, 1) <> 101 or \
-		  audioop.avg(d2, 2) <> 101 or \
-		  audioop.avg(d4, 4) <> 101:
-		return 0
-	return 1
+    if verbose:
+	print 'bias'
+    # Note: this test assumes that avg() works
+    d1 = audioop.bias(data[0], 1, 100)
+    d2 = audioop.bias(data[1], 2, 100)
+    d4 = audioop.bias(data[2], 4, 100)
+    if audioop.avg(d1, 1) <> 101 or \
+	      audioop.avg(d2, 2) <> 101 or \
+	      audioop.avg(d4, 4) <> 101:
+	return 0
+    return 1
 
 def testlin2lin(data):
-	# too simple: we test only the size
-	for d1 in data:
-		for d2 in data:
-			got = len(d1)/3
-			wtd = len(d2)/3
-			if len(audioop.lin2lin(d1, got, wtd)) <> len(d2):
-				return 0
-	return 1
+    if verbose:
+	print 'lin2lin'
+    # too simple: we test only the size
+    for d1 in data:
+	for d2 in data:
+	    got = len(d1)/3
+	    wtd = len(d2)/3
+	    if len(audioop.lin2lin(d1, got, wtd)) <> len(d2):
+		return 0
+    return 1
 
 def testadpcm2lin(data):
-	# Very cursory test
-	if audioop.adpcm2lin('\0\0', 1, None) <> ('\0\0\0\0', (0,0)):
-		return 0
-	return 1
+    # Very cursory test
+    if audioop.adpcm2lin('\0\0', 1, None) <> ('\0\0\0\0', (0,0)):
+	return 0
+    return 1
 
 def testlin2adpcm(data):
-	# Very cursory test
-	if audioop.lin2adpcm('\0\0\0\0', 1, None) <> ('\0\0', (0,0)):
-		return 0
-	return 1
+    if verbose:
+	print 'lin2adpcm'
+    # Very cursory test
+    if audioop.lin2adpcm('\0\0\0\0', 1, None) <> ('\0\0', (0,0)):
+	return 0
+    return 1
 
 def testlin2ulaw(data):
-	if audioop.lin2ulaw(data[0], 1) <> '\377\347\333' or \
-		  audioop.lin2ulaw(data[1], 2) <> '\377\377\377' or \
-		  audioop.lin2ulaw(data[2], 4) <> '\377\377\377':
-		return 0
-	return 1
+    if verbose:
+	print 'lin2ulaw'
+    if audioop.lin2ulaw(data[0], 1) <> '\377\347\333' or \
+	      audioop.lin2ulaw(data[1], 2) <> '\377\377\377' or \
+	      audioop.lin2ulaw(data[2], 4) <> '\377\377\377':
+	return 0
+    return 1
 
 def testulaw2lin(data):
-	# Cursory
-	d = audioop.lin2ulaw(data[0], 1)
-	if audioop.ulaw2lin(d, 1) <> data[0]:
-		return 0
-	return 1
+    if verbose:
+	print 'ulaw2lin'
+    # Cursory
+    d = audioop.lin2ulaw(data[0], 1)
+    if audioop.ulaw2lin(d, 1) <> data[0]:
+	return 0
+    return 1
 
 def testmul(data):
-	data2 = []
-	for d in data:
-		str = ''
-		for s in d:
-			str = str + chr(ord(s)*2)
-		data2.append(str)
-	if audioop.mul(data[0], 1, 2) <> data2[0] or \
-		  audioop.mul(data[1],2, 2) <> data2[1] or \
-		  audioop.mul(data[2], 4, 2) <> data2[2]:
-		return 0
-	return 1
+    if verbose:
+	print 'mul'
+    data2 = []
+    for d in data:
+	str = ''
+	for s in d:
+	    str = str + chr(ord(s)*2)
+	data2.append(str)
+    if audioop.mul(data[0], 1, 2) <> data2[0] or \
+	      audioop.mul(data[1],2, 2) <> data2[1] or \
+	      audioop.mul(data[2], 4, 2) <> data2[2]:
+	return 0
+    return 1
+
+def testratecv(data):
+    if verbose:
+	print 'ratecv'
+    state = (-8000, ((256, 512),))
+    if audioop.ratecv(data[0], 1, 1, 8000, 16000, state) != \
+       ('\001\000\000\001\001\002', state):
+	return 0
+    return 1
 
 def testreverse(data):
-	if audioop.reverse(data[0], 1) <> '\2\1\0':
-		return 0
-	return 1
+    if verbose:
+	print 'reverse'
+    if audioop.reverse(data[0], 1) <> '\2\1\0':
+	return 0
+    return 1
 
 def testtomono(data):
-	data2 = ''
-	for d in data[0]:
-		data2 = data2 + d + d
-	if audioop.tomono(data2, 1, 0.5, 0.5) <> data[0]:
-		return 0
-	return 1
+    if verbose:
+	print 'tomono'
+    data2 = ''
+    for d in data[0]:
+	data2 = data2 + d + d
+    if audioop.tomono(data2, 1, 0.5, 0.5) <> data[0]:
+	return 0
+    return 1
 
 def testtostereo(data):
-	data2 = ''
-	for d in data[0]:
-		data2 = data2 + d + d
-	if audioop.tostereo(data[0], 1, 1, 1) <> data2:
-		return 0
-	return 1
+    if verbose:
+	print 'tostereo'
+    data2 = ''
+    for d in data[0]:
+	data2 = data2 + d + d
+    if audioop.tostereo(data[0], 1, 1, 1) <> data2:
+	return 0
+    return 1
 
 def testfindfactor(data):
-	if audioop.findfactor(data[1], data[1]) <> 1.0:
-		return 0
-	return 1
+    if verbose:
+	print 'findfactor'
+    if audioop.findfactor(data[1], data[1]) <> 1.0:
+	return 0
+    return 1
 
 def testfindfit(data):
-	if audioop.findfit(data[1], data[1]) <> (0, 1.0):
-		return 0
-	return 1
+    if verbose:
+	print 'findfit'
+    if audioop.findfit(data[1], data[1]) <> (0, 1.0):
+	return 0
+    return 1
 
 def testfindmax(data):
-	if audioop.findmax(data[1], 1) <> 2:
-		return 0
-	return 1
+    if verbose:
+	print 'findmax'
+    if audioop.findmax(data[1], 1) <> 2:
+	return 0
+    return 1
 
 def testgetsample(data):
-	for i in range(3):
-		if audioop.getsample(data[0], 1, i) <> i or \
-			  audioop.getsample(data[1], 2, i) <> i or \
-			  audioop.getsample(data[2], 4, i) <> i:
-			return 0
-	return 1
+    if verbose:
+	print 'getsample'
+    for i in range(3):
+	if audioop.getsample(data[0], 1, i) <> i or \
+		  audioop.getsample(data[1], 2, i) <> i or \
+		  audioop.getsample(data[2], 4, i) <> i:
+	    return 0
+    return 1
 
 def testone(name, data):
-	try:
-		func = eval('test'+name)
-	except NameError:
-		print 'No test found for audioop.'+name+'()'
-		return
-	try:
-		rv = func(data)
-	except 'xx':
-		print 'Test FAILED for audioop.'+name+'() (with an exception)'
-		return
-	if not rv:
-		print 'Test FAILED for audioop.'+name+'()'
+    try:
+	func = eval('test'+name)
+    except NameError:
+	print 'No test found for audioop.'+name+'()'
+	return
+    try:
+	rv = func(data)
+    except 'xx':
+	print 'Test FAILED for audioop.'+name+'() (with an exception)'
+	return
+    if not rv:
+	print 'Test FAILED for audioop.'+name+'()'
 
 def testall():
-	data = [gendata1(), gendata2(), gendata4()]
-	names = dir(audioop)
-	# We know there is a routine 'add'
-	routines = []
-	for n in names:
-		if type(eval('audioop.'+n)) == type(audioop.add):
-			routines.append(n)
-	for n in routines:
-		testone(n, data)
+    data = [gendata1(), gendata2(), gendata4()]
+    names = dir(audioop)
+    # We know there is a routine 'add'
+    routines = []
+    for n in names:
+	if type(eval('audioop.'+n)) == type(audioop.add):
+	    routines.append(n)
+    for n in routines:
+	testone(n, data)
 testall()
diff --git a/Lib/dos_8x3/test_bin.py b/Lib/dos_8x3/test_bin.py
new file mode 100644
index 0000000..aa156d9
--- /dev/null
+++ b/Lib/dos_8x3/test_bin.py
@@ -0,0 +1,46 @@
+#! /usr/bin/env python
+"""Test script for the binascii C module
+
+   Uses the mechanism of the python binhex module
+   Roger E. Masse
+"""
+import binhex
+import tempfile
+from test_support import verbose
+
+def test():
+
+    try:
+	fname1 = tempfile.mktemp()
+	fname2 = tempfile.mktemp()
+	f = open(fname1, 'w')
+    except:
+	raise ImportError, "Cannot test binascii without a temp file"
+
+    start = 'Jack is my hero'
+    f.write(start)
+    f.close()
+    
+    binhex.binhex(fname1, fname2)
+    if verbose:
+	print 'binhex'
+
+    binhex.hexbin(fname2, fname1)
+    if verbose:
+	print 'hexbin'
+
+    f = open(fname1, 'r')
+    finish = f.readline()
+
+    if start <> finish:
+	print 'Error: binhex <> hexbin'
+    elif verbose:
+	print 'binhex == hexbin'
+
+    try:
+	import os
+	os.unlink(fname1)
+	os.unlink(fname2)
+    except:
+	pass
+test()
diff --git a/Lib/dos_8x3/test_bsd.py b/Lib/dos_8x3/test_bsd.py
new file mode 100644
index 0000000..7a95eb9
--- /dev/null
+++ b/Lib/dos_8x3/test_bsd.py
@@ -0,0 +1,69 @@
+#! /usr/bin/env python
+"""Test script for the bsddb C module
+   Roger E. Masse
+"""
+import bsddb
+import tempfile
+from test_support import verbose
+
+def test(openmethod, what):
+
+    if verbose:
+	print '\nTesting: ', what
+	
+    fname = tempfile.mktemp()
+    f = openmethod(fname, 'c')
+    if verbose:
+	print 'creation...'
+    f['0'] = ''
+    f['a'] = 'Guido'
+    f['b'] = 'van'
+    f['c'] = 'Rossum'
+    f['d'] = 'invented'
+    f['f'] = 'Python'
+    if verbose:
+	print '%s %s %s' % (f['a'], f['b'], f['c'])
+
+    if what == 'BTree' :
+	if verbose:
+	    print 'key ordering...'
+	f.set_location(f.first()[0])
+	while 1:
+	    try:
+		rec = f.next()
+	    except KeyError:
+		if rec <> f.last():
+		    print 'Error, last <> last!'
+		f.previous()
+		break
+	    if verbose:
+		print rec
+	if not f.has_key('a'):
+	    print 'Error, missing key!'
+
+    f.sync()
+    f.close()
+    if verbose:
+	print 'modification...'
+    f = openmethod(fname, 'w')
+    f['d'] = 'discovered'
+
+    if verbose:
+	print 'access...'
+    for key in f.keys():
+	word = f[key]
+	if verbose:
+	    print word
+
+    f.close()
+
+types = [(bsddb.btopen, 'BTree'),
+	 (bsddb.hashopen, 'Hash Table'),
+	 # (bsddb.rnopen,'Record Numbers'), 'put' for RECNO for bsddb 1.85
+         #                                   appears broken... at least on
+	 #                                   Solaris Intel - rmasse 1/97
+	 ]
+
+for type in types:
+    test(type[0], type[1])
+
diff --git a/Lib/dos_8x3/test_cma.py b/Lib/dos_8x3/test_cma.py
index 8c452d7..71e7729 100644
--- a/Lib/dos_8x3/test_cma.py
+++ b/Lib/dos_8x3/test_cma.py
@@ -1,22 +1,35 @@
 #! /usr/bin/env python
 """ Simple test script for cmathmodule.c
-Roger E. Masse
+    Roger E. Masse
 """
 import cmath
+from test_support import verbose
 
-cmath.acos(1.0)
-cmath.acosh(1.0)
-cmath.asin(1.0)
-cmath.asinh(1.0)
-cmath.atan(0.2)
-cmath.atanh(0.3)
-cmath.cos(1.0)
-cmath.cosh(1.0)
-cmath.exp(1.0)
-cmath.log(1.0)
-cmath.log10(1.0)
-cmath.sin(1.0)
-cmath.sinh(1.0)
-cmath.sqrt(1.0)
-cmath.tan(1.0)
-cmath.tanh(1.0)
+testdict = {'acos' : 1.0,
+	    'acosh' : 1.0,
+	    'asin' : 1.0,
+	    'asinh' : 1.0,
+	    'atan' : 0.2,
+	    'atanh' : 0.2,
+	    'cos' : 1.0,
+	    'cosh' : 1.0,
+	    'exp' : 1.0,
+	    'log' : 1.0,
+	    'log10' : 1.0,
+	    'sin' : 1.0,
+	    'sinh' : 1.0,
+	    'sqrt' : 1.0,
+	    'tan' : 1.0,
+	    'tanh' : 1.0}
+
+for func in testdict.keys():
+    f = getattr(cmath, func)
+    r = f(testdict[func])
+    if verbose:
+	print 'Calling %s(%f) = %f' % (func, testdict[func], abs(r))
+
+p = cmath.pi
+e = cmath.e
+if verbose:
+    print 'PI = ', abs(p)
+    print 'E = ', abs(e)
diff --git a/Lib/dos_8x3/test_cry.py b/Lib/dos_8x3/test_cry.py
index 08e6b61..0685c95 100644
--- a/Lib/dos_8x3/test_cry.py
+++ b/Lib/dos_8x3/test_cry.py
@@ -2,5 +2,10 @@
 """Simple test script for cryptmodule.c
    Roger E. Masse
 """
+
+from test_support import verbose    
 import crypt
-print 'Test encryption: ', crypt.crypt('mypassword', 'ab')
+
+c = crypt.crypt('mypassword', 'ab')
+if verbose:
+    print 'Test encryption: ', c
diff --git a/Lib/dos_8x3/test_err.py b/Lib/dos_8x3/test_err.py
new file mode 100644
index 0000000..6951255
--- /dev/null
+++ b/Lib/dos_8x3/test_err.py
@@ -0,0 +1,44 @@
+#! /usr/bin/env python
+"""Test the errno module
+   Roger E. Masse
+"""
+
+import errno
+from test_support import verbose
+
+errors = ['E2BIG', 'EACCES', 'EADDRINUSE', 'EADDRNOTAVAIL', 'EADV',
+	  'EAFNOSUPPORT', 'EAGAIN', 'EALREADY', 'EBADE', 'EBADF',
+	  'EBADFD', 'EBADMSG', 'EBADR', 'EBADRQC', 'EBADSLT',
+	  'EBFONT', 'EBUSY', 'ECHILD', 'ECHRNG', 'ECOMM',
+	  'ECONNABORTED', 'ECONNREFUSED', 'ECONNRESET',
+	  'EDEADLK', 'EDEADLOCK', 'EDESTADDRREQ', 'EDOM',
+	  'EDQUOT', 'EEXIST', 'EFAULT', 'EFBIG', 'EHOSTDOWN',
+	  'EHOSTUNREACH', 'EIDRM', 'EILSEQ', 'EINPROGRESS',
+	  'EINTR', 'EINVAL', 'EIO', 'EISCONN', 'EISDIR',
+	  'EL2HLT', 'EL2NSYNC', 'EL3HLT', 'EL3RST', 'ELIBACC',
+	  'ELIBBAD', 'ELIBEXEC', 'ELIBMAX', 'ELIBSCN', 'ELNRNG',
+	  'ELOOP', 'EMFILE', 'EMLINK', 'EMSGSIZE', 'EMULTIHOP',
+	  'ENAMETOOLONG', 'ENETDOWN', 'ENETRESET', 'ENETUNREACH',
+	  'ENFILE', 'ENOANO', 'ENOBUFS', 'ENOCSI', 'ENODATA',
+	  'ENODEV', 'ENOENT', 'ENOEXEC', 'ENOLCK', 'ENOLINK',
+	  'ENOMEM', 'ENOMSG', 'ENONET', 'ENOPKG', 'ENOPROTOOPT',
+	  'ENOSPC', 'ENOSR', 'ENOSTR', 'ENOSYS', 'ENOTBLK',
+	  'ENOTCONN', 'ENOTDIR', 'ENOTEMPTY', 'ENOTSOCK',
+	  'ENOTTY', 'ENOTUNIQ', 'ENXIO', 'EOPNOTSUPP',
+	  'EOVERFLOW', 'EPERM', 'EPFNOSUPPORT', 'EPIPE',
+	  'EPROTO', 'EPROTONOSUPPORT', 'EPROTOTYPE',
+	  'ERANGE', 'EREMCHG', 'EREMOTE', 'ERESTART',
+	  'EROFS', 'ESHUTDOWN', 'ESOCKTNOSUPPORT', 'ESPIPE',
+	  'ESRCH', 'ESRMNT', 'ESTALE', 'ESTRPIPE', 'ETIME',
+	  'ETIMEDOUT', 'ETOOMANYREFS', 'ETXTBSY', 'EUNATCH',
+	  'EUSERS', 'EWOULDBLOCK', 'EXDEV', 'EXFULL']
+
+#
+# This is is a wee bit bogus since the module only conditionally adds
+# errno constants if they have been defined by errno.h  However, this
+# test seems to work on SGI, Sparc & intel Solaris, and linux.
+#
+for error in errors:
+    a = getattr(errno, error)
+    if verbose:
+	print '%s: %d' % (error, a)
diff --git a/Lib/dos_8x3/test_fcn.py b/Lib/dos_8x3/test_fcn.py
new file mode 100644
index 0000000..4929fbb
--- /dev/null
+++ b/Lib/dos_8x3/test_fcn.py
@@ -0,0 +1,28 @@
+#! /usr/bin/env python
+"""Test program for the fcntl C module.
+   Roger E. Masse
+"""
+import struct
+import fcntl
+import FCNTL
+import os
+from test_support import verbose
+
+filename = '/tmp/delete-me'
+
+# the example from the library docs
+f = open(filename,'w')
+rv = fcntl.fcntl(f.fileno(), FCNTL.O_NDELAY, 1)
+if verbose:
+    print 'Status from fnctl with O_NDELAY: ', rv
+    
+lockdata = struct.pack('hhllhh', FCNTL.F_WRLCK, 0, 0, 0, 0, 0)
+if verbose:
+    print 'struct.pack: ', lockdata
+    
+rv = fcntl.fcntl(f.fileno(), FCNTL.F_SETLKW, lockdata)
+if verbose:
+    print 'String from fcntl with F_SETLKW: ', rv
+
+f.close()
+os.unlink(filename)
diff --git a/Lib/dos_8x3/test_gdb.py b/Lib/dos_8x3/test_gdb.py
new file mode 100644
index 0000000..22db6aa
--- /dev/null
+++ b/Lib/dos_8x3/test_gdb.py
@@ -0,0 +1,34 @@
+#! /usr/bin/env python
+"""Test script for the gdbm module
+   Roger E. Masse
+"""
+    
+import gdbm
+from gdbm import error
+from test_support import verbose
+
+filename= '/tmp/delete_me'
+
+g = gdbm.open(filename, 'c')
+g['a'] = 'b'
+g['12345678910'] = '019237410982340912840198242'
+a = g.keys()
+if verbose:
+    print 'Test gdbm file keys: ', a
+    
+g.has_key('a')
+g.close()
+g = gdbm.open(filename, 'r')
+g.close()
+g = gdbm.open(filename, 'rw')
+g.close()
+g = gdbm.open(filename, 'w')
+g.close()
+g = gdbm.open(filename, 'n')
+g.close()
+
+try:
+    import os
+    os.unlink(filename)
+except:
+    pass
diff --git a/Lib/dos_8x3/test_ima.py b/Lib/dos_8x3/test_ima.py
new file mode 100644
index 0000000..fc8dadf
--- /dev/null
+++ b/Lib/dos_8x3/test_ima.py
@@ -0,0 +1,165 @@
+#! /usr/bin/env python
+"""Test script for the imageop module.  This has the side
+   effect of partially testing the imgfile module as well.
+   Roger E. Masse
+"""
+from test_support import verbose
+
+import imageop
+
+def main(use_rgbimg=1):
+
+    if use_rgbimg:
+	image, width, height = getrgbimage('test.rgb')
+    else:
+	image, width, height = getimage('test.rgb')
+	
+    # Return the selected part of image, which should by width by height
+    # in size and consist of pixels of psize bytes.
+    if verbose:
+	print 'crop'
+    newimage = imageop.crop (image, 4, width, height, 0, 0, 1, 1)
+
+    # Return image scaled to size newwidth by newheight. No interpolation
+    # is done, scaling is done by simple-minded pixel duplication or removal.
+    # Therefore, computer-generated images or dithered images will
+    # not look nice after scaling. 
+    if verbose:
+	print 'scale'
+    scaleimage = imageop.scale(image, 4, width, height, 1, 1)
+
+    # Run a vertical low-pass filter over an image. It does so by computing
+    # each destination pixel as the average of two vertically-aligned source
+    # pixels. The main use of this routine is to forestall excessive flicker
+    # if the image two vertically-aligned source pixels,  hence the name. 
+    if verbose:
+	print 'tovideo'
+    videoimage = imageop.tovideo (image, 4, width, height)
+
+    # Convert an rgb image to an 8 bit rgb
+    if verbose:
+	print 'rgb2rgb8'
+    greyimage = imageop.rgb2rgb8(image, width, height)
+
+    # Convert an 8 bit rgb image to a 24 bit rgb image
+    if verbose:
+	print 'rgb82rgb'
+    image = imageop.rgb82rgb(greyimage, width, height)
+    
+    # Convert an rgb image to an 8 bit greyscale image
+    if verbose:
+	print 'rgb2grey'
+    greyimage = imageop.rgb2grey(image, width, height)
+
+    # Convert an 8 bit greyscale image to a 24 bit rgb image
+    if verbose:
+	print 'grey2rgb'
+    image = imageop.grey2rgb(greyimage, width, height)
+    
+    # Convert a 8-bit deep greyscale image to a 1-bit deep image by
+    # tresholding all the pixels. The resulting image is tightly packed
+    # and is probably only useful as an argument to mono2grey. 
+    if verbose:
+	print 'grey2mono'
+    monoimage = imageop.grey2mono (greyimage, width, height, 0) 
+
+    # monoimage, width, height = getimage('monotest.rgb')
+    # Convert a 1-bit monochrome image to an 8 bit greyscale or color image.
+    # All pixels that are zero-valued on input get value p0 on output and
+    # all one-value input pixels get value p1 on output. To convert a
+    # monochrome  black-and-white image to greyscale pass the values 0 and
+    # 255 respectively.
+    if verbose:
+	print 'mono2grey'
+    greyimage = imageop.mono2grey (monoimage, width, height, 0, 255)
+
+    # Convert an 8-bit greyscale image to a 1-bit monochrome image using a
+    # (simple-minded) dithering algorithm.
+    if verbose:
+	print 'dither2mono'
+    monoimage = imageop.dither2mono (greyimage, width, height)
+
+    # Convert an 8-bit greyscale image to a 4-bit greyscale image without
+    # dithering. 
+    if verbose:
+	print 'grey2grey4'
+    grey4image = imageop.grey2grey4 (greyimage, width, height) 
+
+    # Convert an 8-bit greyscale image to a 2-bit greyscale image without
+    # dithering. 
+    if verbose:
+	print 'grey2grey2'
+    grey2image = imageop.grey2grey2 (greyimage, width, height) 
+
+    # Convert an 8-bit greyscale image to a 2-bit greyscale image with
+    # dithering. As for dither2mono, the dithering algorithm is currently
+    # very simple. 
+    if verbose:
+	print 'dither2grey2'
+    grey2image = imageop.dither2grey2 (greyimage, width, height) 
+
+    # Convert a 4-bit greyscale image to an 8-bit greyscale image. 
+    if verbose:
+	print 'grey42grey'
+    greyimage = imageop.grey42grey (grey4image, width, height) 
+
+    # Convert a 2-bit greyscale image to an 8-bit greyscale image. 
+    if verbose:
+	print 'grey22grey'
+    image = imageop.grey22grey (grey2image, width, height) 
+
+def getrgbimage(name):
+    """return a tuple consisting of image (in 'imgfile' format but
+    using rgbimg instead) width and height"""
+
+    import rgbimg
+
+    try:
+	sizes = rgbimg.sizeofimage(name)
+    except rgbimg.error:
+	name = get_qualified_path(name)
+	sizes = rgbimg.sizeofimage(name)
+    if verbose:
+	print 'rgbimg opening test image: %s, sizes: %s' % (name, str(sizes))
+
+    image = rgbimg.longimagedata(name)
+    return (image, sizes[0], sizes[1])
+  
+def getimage(name):
+    """return a tuple consisting of
+       image (in 'imgfile' format) width and height
+    """
+
+    import imgfile
+  
+    try:
+	sizes = imgfile.getsizes(name)
+    except imgfile.error:
+	name = get_qualified_path(name)
+	sizes = imgfile.getsizes(name)
+    if verbose:
+	print 'imgfile opening test image: %s, sizes: %s' % (name, str(sizes))
+
+    image = imgfile.read(name)
+    return (image, sizes[0], sizes[1])
+
+def get_qualified_path(name):
+    """ return a more qualified path to name contructed from argv[1]"""
+    import sys
+    import os
+    import string
+    
+   # get a more qualified path component of the script...
+    if __name__ == '__main__':
+	ourname = sys.argv[0]
+    else: # ...or the full path of the module
+	ourname = sys.modules[__name__].__file__
+
+    parts = string.splitfields(ourname, os.sep)
+    parts[-1] = name
+    name = string.joinfields(parts, os.sep)
+    return name
+
+# rgbimg (unlike imgfile) is portable to platforms other than SGI.  So we prefer to use it.
+main(use_rgbimg=1)
+
diff --git a/Lib/dos_8x3/test_img.py b/Lib/dos_8x3/test_img.py
new file mode 100644
index 0000000..8a3b91e
--- /dev/null
+++ b/Lib/dos_8x3/test_img.py
@@ -0,0 +1,110 @@
+#! /usr/bin/env python
+"""Simple test script for imgfile.c
+   Roger E. Masse
+"""
+from test_support import verbose
+
+import imgfile
+
+     
+def main():       
+
+    # Test a 3 byte color image
+    testimage('test.rgb')
+    
+    # Test a 1 byte greyscale image
+    testimage('greytest.rgb')
+
+
+def testimage(name):
+    """Run through the imgfile's battery of possible methods
+       on the image passed in name.
+    """
+
+    import sys
+    import os
+    import string
+
+    outputfile = '/tmp/deleteme'
+
+    # try opening the name directly
+    try:
+	# This function returns a tuple (x, y, z) where x and y are the size
+	# of the image in pixels and z is the number of bytes per pixel. Only
+	# 3 byte RGB pixels and 1 byte greyscale pixels are supported.
+	sizes = imgfile.getsizes(name)
+    except imgfile.error:
+	# get a more qualified path component of the script...
+	if __name__ == '__main__':
+	    ourname = sys.argv[0]
+	else: # ...or the full path of the module
+	    ourname = sys.modules[__name__].__file__
+
+	parts = string.splitfields(ourname, os.sep)
+	parts[-1] = name
+	name = string.joinfields(parts, os.sep)
+	sizes = imgfile.getsizes(name)
+    if verbose:
+	print 'Opening test image: %s, sizes: %s' % (name, str(sizes))
+    # This function reads and decodes the image on the specified file,
+    # and returns it as a python string. The string has either 1 byte
+    # greyscale pixels or 4 byte RGBA pixels. The bottom left pixel
+    # is the first in the string. This format is suitable to pass
+    # to gl.lrectwrite, for instance. 
+    image = imgfile.read(name)
+    
+    # This function writes the RGB or greyscale data in data to
+    # image file file. x and y give the size of the image, z is
+    # 1 for 1 byte greyscale images or 3 for RGB images (which
+    # are stored as 4 byte values of which only the lower three
+    # bytes are used). These are the formats returned by gl.lrectread. 
+    if verbose:
+	print 'Writing output file'
+    imgfile.write (outputfile, image, sizes[0], sizes[1], sizes[2]) 
+   
+
+    if verbose:
+	print 'Opening scaled test image: %s, sizes: %s' % (name, str(sizes))
+    # This function is identical to read but it returns an image that
+    # is scaled to the given x and y sizes. If the filter and blur
+    # parameters are omitted scaling is done by simply dropping
+    # or duplicating pixels, so the result will be less than perfect,
+    # especially for computer-generated images.  Alternatively,
+    # you can specify a filter to use to smoothen the image after
+    # scaling. The filter forms supported are 'impulse', 'box',
+    # 'triangle', 'quadratic' and 'gaussian'. If a filter is
+    # specified blur is an optional parameter specifying the
+    # blurriness of the filter. It defaults to 1.0.  readscaled
+    # makes no attempt to keep the aspect ratio correct, so that
+    # is the users' responsibility.
+    if verbose:
+	print 'Filtering with "impulse"'
+    simage = imgfile.readscaled (name, sizes[0]/2, sizes[1]/2, 'impulse', 2.0)
+
+    # This function sets a global flag which defines whether the
+    # scan lines of the image are read or written from bottom to
+    # top (flag is zero, compatible with SGI GL) or from top to
+    # bottom(flag is one, compatible with X). The default is zero. 
+    if verbose:
+	print 'Switching to X compatibility'
+    imgfile.ttob (1) 
+
+    if verbose:
+	print 'Filtering with "triangle"'
+    simage = imgfile.readscaled (name, sizes[0]/2, sizes[1]/2, 'triangle', 3.0)
+    if verbose:
+	print 'Switching back to SGI compatibility'
+    imgfile.ttob (0) 
+    
+    if verbose: print 'Filtering with "quadratic"'
+    simage = imgfile.readscaled (name, sizes[0]/2, sizes[1]/2, 'quadratic')
+    if verbose: print 'Filtering with "gaussian"'
+    simage = imgfile.readscaled (name, sizes[0]/2, sizes[1]/2, 'gaussian', 1.0)
+
+    if verbose:
+	print 'Writing output file'
+    imgfile.write (outputfile, simage, sizes[0]/2, sizes[1]/2, sizes[2]) 
+
+    os.unlink(outputfile)
+
+main()
diff --git a/Lib/dos_8x3/test_reg.py b/Lib/dos_8x3/test_reg.py
new file mode 100644
index 0000000..9d25d92
--- /dev/null
+++ b/Lib/dos_8x3/test_reg.py
@@ -0,0 +1,62 @@
+from test_support import verbose
+import regex
+from regex_syntax import *
+
+re = 'a+b+c+'
+print 'no match:', regex.match(re, 'hello aaaabcccc world')
+print 'successful search:', regex.search(re, 'hello aaaabcccc world')
+try:
+    cre = regex.compile('\(' + re)
+except regex.error:
+    print 'caught expected exception'
+else:
+    print 'expected regex.error not raised'
+
+print 'failed awk syntax:', regex.search('(a+)|(b+)', 'cdb')
+prev = regex.set_syntax(RE_SYNTAX_AWK)
+print 'successful awk syntax:', regex.search('(a+)|(b+)', 'cdb')
+regex.set_syntax(prev)
+print 'failed awk syntax:', regex.search('(a+)|(b+)', 'cdb')
+
+re = '\(<one>[0-9]+\) *\(<two>[0-9]+\)'
+print 'matching with group names and compile()'
+cre = regex.compile(re)
+print cre.match('801 999')
+try:
+    print cre.group('one')
+except regex.error:
+    print 'caught expected exception'
+else:
+    print 'expected regex.error not raised'
+
+print 'matching with group names and symcomp()'
+cre = regex.symcomp(re)
+print cre.match('801 999')
+print cre.group(0)
+print cre.group('one')
+print cre.group(1, 2)
+print cre.group('one', 'two')
+print 'realpat:', cre.realpat
+print 'groupindex:', cre.groupindex
+
+re = 'world'
+cre = regex.compile(re)
+print 'not case folded search:', cre.search('HELLO WORLD')
+cre = regex.compile(re, regex.casefold)
+print 'case folded search:', cre.search('HELLO WORLD')
+
+print '__members__:', cre.__members__
+print 'regs:', cre.regs
+print 'last:', cre.last
+print 'translate:', `cre.translate`
+print 'givenpat:', cre.givenpat
+
+print 'match with pos:', cre.match('hello world', 7)
+print 'search with pos:', cre.search('hello world there world', 7)
+print 'bogus group:', cre.group(0, 1, 3)
+try:
+    print 'no name:', cre.group('one')
+except regex.error:
+    print 'caught expected exception'
+else:
+    print 'expected regex.error not raised'
diff --git a/Lib/dos_8x3/test_rgb.py b/Lib/dos_8x3/test_rgb.py
index cdadc66..52814b4 100755
--- a/Lib/dos_8x3/test_rgb.py
+++ b/Lib/dos_8x3/test_rgb.py
@@ -23,7 +23,8 @@ def testimg(rgb_file, raw_file):
 		raise error, 'bad image length'
 	raw = open(raw_file, 'r').read()
 	if rgb != raw:
-		raise error, 'images don\'t match for '+rgb_file+' and '+raw_file
+		raise error, \
+		      'images don\'t match for '+rgb_file+' and '+raw_file
 	for depth in [1, 3, 4]:
 		rgbimg.longstoimage(rgb, width, height, depth, '@.rgb')
 	os.unlink('@.rgb')
diff --git a/Lib/dos_8x3/test_rot.py b/Lib/dos_8x3/test_rot.py
new file mode 100644
index 0000000..338ea9d
--- /dev/null
+++ b/Lib/dos_8x3/test_rot.py
@@ -0,0 +1,28 @@
+import rotor
+
+r = rotor.newrotor("you'll never guess this")
+r = rotor.newrotor("you'll never guess this", 12)
+
+A = 'spam and eggs'
+B = 'cheese shop'
+
+a = r.encrypt(A)
+print a
+b = r.encryptmore(B)
+print b
+
+A1 = r.decrypt(a)
+print A1
+if A1 <> A:
+    print 'decrypt failed'
+
+B1 = r.decryptmore(b)
+print B1
+if B1 <> B:
+    print 'decryptmore failed'
+
+try:
+    r.setkey()
+except TypeError:
+    pass
+r.setkey('you guessed it!')
diff --git a/Lib/dos_8x3/test_sel.py b/Lib/dos_8x3/test_sel.py
index f185308..f7f20f3 100755
--- a/Lib/dos_8x3/test_sel.py
+++ b/Lib/dos_8x3/test_sel.py
@@ -1,14 +1,44 @@
 # Testing select module
+import select
+import os
+
+# test some known error conditions
+try:
+    rfd, wfd, xfd = select.select(1, 2, 3)
+except TypeError:
+    pass
+else:
+    print 'expected TypeError exception not raised'
+
+class Nope:
+    pass
+
+class Almost:
+    def fileno(self):
+	return 'fileno'
+    
+try:
+    rfd, wfd, xfd = select.select([Nope()], [], [])
+except TypeError:
+    pass
+else:
+    print 'expected TypeError exception not raised'
+
+try:
+    rfd, wfd, xfd = select.select([Almost()], [], [])
+except TypeError:
+    pass
+else:
+    print 'expected TypeError exception not raised'
+
 
 def test():
-	import select
-	import os
-	cmd = 'for i in 0 1 2 3 4 5 6 7 8 9; do date; sleep 3; done'
+	cmd = 'for i in 0 1 2 3 4 5 6 7 8 9; do echo testing...; sleep 1; done'
 	p = os.popen(cmd, 'r')
 	for tout in (0, 1, 2, 4, 8, 16) + (None,)*10:
 		print 'timeout =', tout
 		rfd, wfd, xfd = select.select([p], [], [], tout)
-		print rfd, wfd, xfd
+## 		print rfd, wfd, xfd
 		if (rfd, wfd, xfd) == ([], [], []):
 			continue
 		if (rfd, wfd, xfd) == ([p], [], []):
@@ -19,5 +49,7 @@ def test():
 				break
 			continue
 		print 'Heh?'
+	p.close()
 
 test()
+
diff --git a/Lib/dos_8x3/test_sig.py b/Lib/dos_8x3/test_sig.py
index bfcf517..3619b96 100755
--- a/Lib/dos_8x3/test_sig.py
+++ b/Lib/dos_8x3/test_sig.py
@@ -1,31 +1,37 @@
 # Test the signal module
-
+from test_support import verbose
 import signal
 import os
 
 
+if verbose:
+	x = '-x'
+else:
+	x = '+x'
 pid = os.getpid()
 
 # Shell script that will send us asynchronous signals
 script = """
-(
-	set -x
+ (
+	set %(x)s
 	sleep 2
 	kill -5 %(pid)d
 	sleep 2
 	kill -2 %(pid)d
 	sleep 2
 	kill -3 %(pid)d
-) &
+ ) &
 """ % vars()
 
 def handlerA(*args):
-	print "handlerA", args
+	if verbose:
+		print "handlerA", args
 
 HandlerBCalled = "HandlerBCalled"	# Exception
 
 def handlerB(*args):
-	print "handlerB", args
+	if verbose:
+		print "handlerB", args
 	raise HandlerBCalled, args
 
 signal.alarm(20)			# Entire test lasts at most 20 sec.
@@ -40,11 +46,18 @@ print "starting pause() loop..."
 
 try:
 	while 1:
-		print "call pause()..."
+		if verbose:
+			print "call pause()..."
 		try:
 			signal.pause()
-			print "pause() returned"
+			if verbose:
+				print "pause() returned"
 		except HandlerBCalled:
-			print "HandlerBCalled exception caught"
+			if verbose:
+				print "HandlerBCalled exception caught"
+			else:
+				pass
+				
 except KeyboardInterrupt:
-	print "KeyboardInterrupt (assume the alarm() went off)"
+	if verbose:
+		print "KeyboardInterrupt (assume the alarm() went off)"
diff --git a/Lib/dos_8x3/test_soc.py b/Lib/dos_8x3/test_soc.py
new file mode 100644
index 0000000..1e157b9
--- /dev/null
+++ b/Lib/dos_8x3/test_soc.py
@@ -0,0 +1,142 @@
+# Not tested:
+#	socket.fromfd()
+# 	sktobj.getsockopt()
+#	sktobj.recvfrom()
+#	sktobj.sendto()
+#	sktobj.setblocking()
+# 	sktobj.setsockopt()
+#	sktobj.shutdown()
+
+
+from test_support import verbose
+import socket
+import os
+import time
+import string
+
+def missing_ok(str):
+    try:
+	getattr(socket, str)
+    except AttributeError:
+	pass
+
+print socket.error
+
+print socket.AF_INET
+
+print socket.SOCK_STREAM
+print socket.SOCK_DGRAM
+print socket.SOCK_RAW
+print socket.SOCK_RDM
+print socket.SOCK_SEQPACKET
+
+for optional in ("AF_UNIX",
+
+		 "SO_DEBUG", "SO_ACCEPTCONN", "SO_REUSEADDR", "SO_KEEPALIVE",
+		 "SO_DONTROUTE", "SO_BROADCAST", "SO_USELOOPBACK", "SO_LINGER",
+		 "SO_OOBINLINE", "SO_REUSEPORT", "SO_SNDBUF", "SO_RCVBUF",
+		 "SO_SNDLOWAT", "SO_RCVLOWAT", "SO_SNDTIMEO", "SO_RCVTIMEO",
+		 "SO_ERROR", "SO_TYPE", "SOMAXCONN",
+
+		 "MSG_OOB", "MSG_PEEK", "MSG_DONTROUTE", "MSG_EOR",
+		 "MSG_TRUNC", "MSG_CTRUNC", "MSG_WAITALL", "MSG_BTAG",
+		 "MSG_ETAG",
+
+		 "SOL_SOCKET",
+
+		 "IPPROTO_IP", "IPPROTO_ICMP", "IPPROTO_IGMP",
+		 "IPPROTO_GGP", "IPPROTO_TCP", "IPPROTO_EGP",
+		 "IPPROTO_PUP", "IPPROTO_UDP", "IPPROTO_IDP",
+		 "IPPROTO_HELLO", "IPPROTO_ND", "IPPROTO_TP",
+		 "IPPROTO_XTP", "IPPROTO_EON", "IPPROTO_BIP",
+		 "IPPROTO_RAW", "IPPROTO_MAX",
+
+		 "IPPORT_RESERVED", "IPPORT_USERRESERVED",
+
+		 "INADDR_ANY", "INADDR_BROADCAST", "INADDR_LOOPBACK",
+		 "INADDR_UNSPEC_GROUP", "INADDR_ALLHOSTS_GROUP",
+		 "INADDR_MAX_LOCAL_GROUP", "INADDR_NONE",
+
+		 "IP_OPTIONS", "IP_HDRINCL", "IP_TOS", "IP_TTL",
+		 "IP_RECVOPTS", "IP_RECVRETOPTS", "IP_RECVDSTADDR",
+		 "IP_RETOPTS", "IP_MULTICAST_IF", "IP_MULTICAST_TTL",
+		 "IP_MULTICAST_LOOP", "IP_ADD_MEMBERSHIP",
+		 "IP_DROP_MEMBERSHIP",
+		 ):
+    missing_ok(optional)
+
+hostname = socket.gethostname()
+ip = socket.gethostbyname(hostname)
+hname, aliases, ipaddrs = socket.gethostbyaddr(ip)
+all_host_names = [hname] + aliases
+
+if verbose:
+    print hostname
+    print ip
+    print hname, aliases, ipaddrs
+    print all_host_names
+
+for name in all_host_names:
+    if string.find(name, '.'):
+	break
+else:
+    print 'FQDN not found'
+
+print socket.getservbyname('telnet', 'tcp')
+try:
+    socket.getservbyname('telnet', 'udp')
+except socket.error:
+    pass
+
+
+try:
+    PORT = 50007
+    if os.fork():
+	# parent is server
+	s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+	s.bind(hostname, PORT)
+	s.listen(1)
+	if verbose:
+	    print 'parent accepting'
+	conn, addr = s.accept()
+	if verbose:
+	    print 'connected by', addr
+	# couple of interesting tests while we've got a live socket
+	f = conn.fileno()
+	if verbose:
+	    print 'fileno:', f
+	p = conn.getpeername()
+	if verbose:
+	    print 'peer:', p
+	n = conn.getsockname()
+	if verbose:
+	    print 'sockname:', n
+	f = conn.makefile()
+	if verbose:
+	    print 'file obj:', f
+	while 1:
+	    data = conn.recv(1024)
+	    if not data:
+		break
+	    if verbose:
+		print 'received:', data
+	    conn.send(data)
+	conn.close()
+    else:
+	try:
+	    # child is client
+	    time.sleep(1)
+	    s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+	    if verbose:
+		print 'child connecting'
+	    s.connect(hostname, PORT)
+	    msg = 'socket test'
+	    s.send(msg)
+	    data = s.recv(1024)
+	    if msg <> data:
+		print 'parent/client mismatch'
+	    s.close()
+	finally:
+	    os._exit(1)
+except socket.error:
+    pass
diff --git a/Lib/dos_8x3/test_str.py b/Lib/dos_8x3/test_str.py
index 424cf52..efc98ff 100644
--- a/Lib/dos_8x3/test_str.py
+++ b/Lib/dos_8x3/test_str.py
@@ -1,13 +1,21 @@
+from test_support import verbose
 import strop, sys
 
 def test(name, input, output, *args):
+    if verbose:
+	print 'string.%s%s =? %s... ' % (name, (input,) + args, output),
     f = getattr(strop, name)
     try:
 	value = apply(f, (input,) + args)
     except:
 	 value = sys.exc_type
     if value != output:
+	if verbose:
+	    print 'no'
 	print f, `input`, `output`, `value`
+    else:
+	if verbose:
+	    print 'yes'
 
 test('atoi', " 1 ", 1)
 test('atoi', " 1x", ValueError)
@@ -38,8 +46,19 @@ test('split', 'this is the split function',
 test('split', 'a|b|c|d', ['a', 'b', 'c', 'd'], '|')
 test('split', 'a|b|c|d', ['a', 'b', 'c|d'], '|', 2)
 
+# join now works with any sequence type
+class Sequence:
+    def __init__(self): self.seq = 'wxyz'
+    def __len__(self): return len(self.seq)
+    def __getitem__(self, i): return self.seq[i]
+
 test('join', ['a', 'b', 'c', 'd'], 'a b c d')
-test('join', ['a', 'b', 'c', 'd'], 'abcd', '')
+test('join', ('a', 'b', 'c', 'd'), 'abcd', '')
+test('join', Sequence(), 'w x y z')
+
+# try a few long ones
+print strop.join(['x' * 100] * 100, ':')
+print strop.join(('x' * 100,) * 100, ':')
 
 test('strip', '   hello   ', 'hello')
 test('lstrip', '   hello   ', 'hello   ')
diff --git a/Lib/dos_8x3/test_sun.py b/Lib/dos_8x3/test_sun.py
new file mode 100644
index 0000000..aa85752
--- /dev/null
+++ b/Lib/dos_8x3/test_sun.py
@@ -0,0 +1,28 @@
+from test_support import verbose, TestFailed
+import sunaudiodev
+import os
+
+def findfile(file):
+	if os.path.isabs(file): return file
+	import sys
+	for dn in sys.path:
+		fn = os.path.join(dn, file)
+		if os.path.exists(fn): return fn
+	return file
+
+def play_sound_file(path):
+    fp = open(path, 'r')
+    data = fp.read()
+    fp.close()
+    try:
+	a = sunaudiodev.open('w')
+    except sunaudiodev.error, msg:
+	raise TestFailed, msg
+    else:
+	a.write(data)
+	a.close()
+
+def test():
+    play_sound_file(findfile('audiotest.au'))
+
+test()
diff --git a/Lib/dos_8x3/test_sup.py b/Lib/dos_8x3/test_sup.py
index 7a76664..7dc1940 100755
--- a/Lib/dos_8x3/test_sup.py
+++ b/Lib/dos_8x3/test_sup.py
@@ -2,6 +2,8 @@
 
 TestFailed = 'test_support -- test failed'	# Exception
 
+verbose = 1				# Flag set to 0 by regrtest.py
+
 def unload(name):
 	import sys
 	try:
diff --git a/Lib/dos_8x3/test_thr.py b/Lib/dos_8x3/test_thr.py
index 4e0eb70..8a1f435 100755
--- a/Lib/dos_8x3/test_thr.py
+++ b/Lib/dos_8x3/test_thr.py
@@ -2,6 +2,7 @@
 
 # Create a bunch of threads, let each do some work, wait until all are done
 
+from test_support import verbose
 import whrandom
 import thread
 import time
@@ -19,9 +20,11 @@ def task(ident):
 	whmutex.acquire()
 	delay = whrandom.random() * numtasks
 	whmutex.release()
-	print 'task', ident, 'will run for', delay, 'sec'
+	if verbose:
+	    print 'task', ident, 'will run for', delay, 'sec'
 	time.sleep(delay)
-	print 'task', ident, 'done'
+	if verbose:
+	    print 'task', ident, 'done'
 	mutex.acquire()
 	running = running - 1
 	if running == 0:
@@ -33,7 +36,8 @@ def newtask():
 	global next_ident, running
 	mutex.acquire()
 	next_ident = next_ident + 1
-	print 'creating task', next_ident
+	if verbose:
+	    print 'creating task', next_ident
 	thread.start_new_thread(task, (next_ident,))
 	running = running + 1
 	mutex.release()
@@ -84,11 +88,14 @@ def task2(ident):
 			whmutex.acquire()
 			delay = whrandom.random() * numtasks
 			whmutex.release()
-		print 'task', ident, 'will run for', delay, 'sec'
+		if verbose:
+		    print 'task', ident, 'will run for', delay, 'sec'
 		time.sleep(delay)
-		print 'task', ident, 'entering barrier', i
+		if verbose:
+		    print 'task', ident, 'entering barrier', i
 		bar.enter()
-		print 'task', ident, 'leaving barrier', i
+		if verbose:
+		    print 'task', ident, 'leaving barrier', i
 	mutex.acquire()
 	running = running - 1
 	if running == 0:
diff --git a/Lib/dos_8x3/test_tim.py b/Lib/dos_8x3/test_tim.py
index bfc768a..85ea6ee 100644
--- a/Lib/dos_8x3/test_tim.py
+++ b/Lib/dos_8x3/test_tim.py
@@ -13,8 +13,8 @@ if int(time.mktime(time.localtime(t))) <> int(t):
 
 time.sleep(1.2)
 tt = time.gmtime(t)
-for directive in ('a', 'A', 'b', 'B', 'c', 'd', 'E', 'H', 'I',
-		  'j', 'm', 'M', 'n', 'N', 'o', 'p', 'S', 't',
+for directive in ('a', 'A', 'b', 'B', 'c', 'd', 'H', 'I',
+		  'j', 'm', 'M', 'p', 'S',
 		  'U', 'w', 'W', 'x', 'X', 'y', 'Y', 'Z', '%'):
     format = '%' + directive
     time.strftime(format, tt)
-- 
cgit v0.12

