From 082d28912f5ca45a179a7d51a8eee8b0d1ecbab6 Mon Sep 17 00:00:00 2001
From: Guido van Rossum <guido@python.org>
Date: Fri, 16 May 1997 16:24:09 +0000
Subject: Added CRLF for Notepad.

---
 PC/readme.txt | 320 +++++++++++++++++++++++++++++-----------------------------
 1 file changed, 160 insertions(+), 160 deletions(-)

diff --git a/PC/readme.txt b/PC/readme.txt
index 62a2ae9..b5df029 100644
--- a/PC/readme.txt
+++ b/PC/readme.txt
@@ -1,160 +1,160 @@
-Welcome to the "PC" subdirectory of the Python distribution!
-************************************************************
-
-
-This "PC" subdirectory contains complete project files to make
-several PC ports of Python, as well as all the PC-specific
-Python source files.  It should be located in the root of the
-Python distribution, and there should be directories "Modules",
-"Objects", "Python", etc. in the parent directory of this "PC"
-subdirectory.
-
-Be sure to read the documentation in the Python distribution.  You
-must set the environment variable PYTHONPATH to point to your Python
-library directory.  This is "../Lib", but you must use an absolute path,
-and perhaps copy it somewhere else.  Be sure to include the Windows
-specific directory "win" too.  If you use a DOS FAT file system and
-either a DOS or Windows 3.1x Python version, you should also put
-../Lib/dos_8x3 on your PYTHONPATH too, since it has DOS 8x3 names
-for the standard Python library names.  So your autoexec.bat should have:
-   set PYTHONPATH=.;c:\python\lib;c:\python\lib\win
-for Windows NT or
-   set PYTHONPATH=.;c:\python\lib;c:\python\lib\win;c:\python\lib\dos_8x3
-for DOS or Windows 3.1x (change the path to the correct path).
-
-There are several add-in modules to build Python programs which use
-the native Windows operating environment.  The ports here just make
-"QuickWin" and DOS Python versions which support a character-mode
-(console) environment.  Look in www.python.org for Tkinter, PythonWin,
-WPY and wxPython.
-
-To make a Python port, start the Integrated Development Environment
-(IDE) of your compiler, and read in the native "project file"
-(or makefile) provided.  This will enable you to change any source
-files or build settings so you can make custom builds.
-
-config.h    An important configuration file specific to PC's.
-
-config.c    The list of C modules to include in the Python PC
-            version.  Manually edit this file to add or
-            remove Python modules.
-
-testpy.py   A Python test program.  Run this to test your
-            Python port.  It should say "all tests OK".
-
-src         A subdirectory used only for VC++ version 1.5 Python
-            source files.  See below.  The other compilers do not
-            use it.  They reference the actual distribution
-            directories instead.
-
-
-Microsoft Visual C++ Version 4.0 (32-bit Windows)
-=================================================
-
-(While we have done all our testing with VC version 4.0, we are
-confident that the same procedure will work for versions 4.1 and 4.2.)
-
-The distributed Makefile is vc40.mak.  This file is distributed with
-CRLF line separators, otherwise Developer Studio won't like it.  It
-will NOT work from this PC directory.  To use it, first copy it to the
-Python distribution directory, e.g. with this command:
-    copy vc40.mak ..
-To convert the Makefile into a project file, start Developer Studio,
-choose Open Workspace, change the file name pattern to *.mak, find and
-select the file vc40.mak, and click OK.  Developer Studio will create
-additional project files vc40.ncb and vc40.mdp when you use the
-project.  The project contains six targets, which should be built in
-this order:
-
-python14    The Python core as a DLL, named python14.dll.
-
-python      The Python main program, named python.exe.  This should
-            work as a console program under Windows 95 or NT, as well
-            as under Windows 3.1(1) when using win32s.  It uses
-            python14.dll.
-
-_tkinter    The optional _tkinter extension, _tkinter.dll; see below.
-
-ALl end products of the compilation are placed in the subdirectory
-vc40 (which Developer Studio creates); object files are placed in
-vc40/tmp.  There are no separate Release and Debug project variants.
-Note that the python and _tkinter projects require that the
-python14.lib file exists in the vc40 subdirectory before they can be
-built.
-
-*** How to build the _tkinter extension ***
-
-This assumes that you have installed the Tcl/Tk binary distribution for
-Windows 95/NT with version numbers 7.5p1/4.1p1, in the default
-installation location (C:\tcl).  (Ftp to ftp.sunlabs.com in /pub/tcl,
-file win41p1.exe.)  You must also fetch and unpack the zip file
-vclibs41.zip which contains the files tcl75.lib and tk41.lib, and place
-those files in the PC subdirectory.  In order to use _tkinter, the
-Tkinter.py module must be on PYTHONPATH.  It is found in the
-Lib\tkinter subdirectory.
-
-
-Additional files and subdirectories for 32-bit Windows
-======================================================
-
-python_nt.def  Exports definition file for python14.dll.
-
-python_nt.rc   Resource compiler input for python14.dll.
-
-dl_nt.c, getpath_nt.c, import_nt.c
-               Additional sources used for 32-bit Windows features.
-
-main_nt.c      Source for python.exe.
-
-dllbase_nt.txt A (manually maintained) list of base addresses for
-               various DLLs, to avoid run-time relocation.
-
-_tkinter.def   The export definitions file for _tkinter.dll.
-
-make_nt.in     Include file for nmake-based builds (unsupported).
-
-example_nt     A subdirectory showing how to build an extension as a
-               DLL.
-
-setup_nt       A subdirectory containing an experimental installer
-               using Python only.
-
-
-Microsoft Visual C++ Version 1.5 (16-bit Windows)
-=================================================
-
-Since VC++1.5 does not handle long file names, it is necessary
-to run the "makesrc.exe" program in this directory to copy
-Python files from the distribution to the directory "src"
-with shortened names.  Included file names are shortened too.
-Do this before you attempt to build Python.
-
-The "makesrc.exe" program is a native NT program, and you must
-have NT, Windows 95 or Win32s to run it.  Otherwise you will need
-to copy distribution files to src yourself.
-
-The makefiles are named *.mak and are located in directories
-starting with "vc15_".  NOTE:  When dependencies are scanned
-VC++ will create dependencies for directories which are not
-used because it fails to evaluate "#define" properly.  You
-must manaully edit makefiles (*.mak) to remove references to
-"sys/" and other bad directories.
-
-vc15_lib    A static Python library.  Create this first because is
-            is required for vc15_w31.
-
-vc15_w31    A Windows 3.1x Python QuickWin (console-mode)
-            Python including sockets.  Requires vc15_lib.
-
-
-Watcom C++ Version 10.6
-=======================
-
-The project file for the Watcom compiler is ./python.wpj.
-It will build Watcom versions in the directories wat_*.
-
-wat_dos     A 32-bit extended DOS Python (console-mode) using the
-            dos4gw DOS extender.  Sockets are not included.
-
-wat_os2     A 32-bit OS/2 Python (console-mode).
-            Sockets are not included.
+Welcome to the "PC" subdirectory of the Python distribution!
+************************************************************
+
+
+This "PC" subdirectory contains complete project files to make
+several PC ports of Python, as well as all the PC-specific
+Python source files.  It should be located in the root of the
+Python distribution, and there should be directories "Modules",
+"Objects", "Python", etc. in the parent directory of this "PC"
+subdirectory.
+
+Be sure to read the documentation in the Python distribution.  You
+must set the environment variable PYTHONPATH to point to your Python
+library directory.  This is "../Lib", but you must use an absolute path,
+and perhaps copy it somewhere else.  Be sure to include the Windows
+specific directory "win" too.  If you use a DOS FAT file system and
+either a DOS or Windows 3.1x Python version, you should also put
+../Lib/dos_8x3 on your PYTHONPATH too, since it has DOS 8x3 names
+for the standard Python library names.  So your autoexec.bat should have:
+   set PYTHONPATH=.;c:\python\lib;c:\python\lib\win
+for Windows NT or
+   set PYTHONPATH=.;c:\python\lib;c:\python\lib\win;c:\python\lib\dos_8x3
+for DOS or Windows 3.1x (change the path to the correct path).
+
+There are several add-in modules to build Python programs which use
+the native Windows operating environment.  The ports here just make
+"QuickWin" and DOS Python versions which support a character-mode
+(console) environment.  Look in www.python.org for Tkinter, PythonWin,
+WPY and wxPython.
+
+To make a Python port, start the Integrated Development Environment
+(IDE) of your compiler, and read in the native "project file"
+(or makefile) provided.  This will enable you to change any source
+files or build settings so you can make custom builds.
+
+config.h    An important configuration file specific to PC's.
+
+config.c    The list of C modules to include in the Python PC
+            version.  Manually edit this file to add or
+            remove Python modules.
+
+testpy.py   A Python test program.  Run this to test your
+            Python port.  It should say "all tests OK".
+
+src         A subdirectory used only for VC++ version 1.5 Python
+            source files.  See below.  The other compilers do not
+            use it.  They reference the actual distribution
+            directories instead.
+
+
+Microsoft Visual C++ Version 4.0 (32-bit Windows)
+=================================================
+
+(While we have done all our testing with VC version 4.0, we are
+confident that the same procedure will work for versions 4.1 and 4.2.)
+
+The distributed Makefile is vc40.mak.  This file is distributed with
+CRLF line separators, otherwise Developer Studio won't like it.  It
+will NOT work from this PC directory.  To use it, first copy it to the
+Python distribution directory, e.g. with this command:
+    copy vc40.mak ..
+To convert the Makefile into a project file, start Developer Studio,
+choose Open Workspace, change the file name pattern to *.mak, find and
+select the file vc40.mak, and click OK.  Developer Studio will create
+additional project files vc40.ncb and vc40.mdp when you use the
+project.  The project contains six targets, which should be built in
+this order:
+
+python14    The Python core as a DLL, named python14.dll.
+
+python      The Python main program, named python.exe.  This should
+            work as a console program under Windows 95 or NT, as well
+            as under Windows 3.1(1) when using win32s.  It uses
+            python14.dll.
+
+_tkinter    The optional _tkinter extension, _tkinter.dll; see below.
+
+ALl end products of the compilation are placed in the subdirectory
+vc40 (which Developer Studio creates); object files are placed in
+vc40/tmp.  There are no separate Release and Debug project variants.
+Note that the python and _tkinter projects require that the
+python14.lib file exists in the vc40 subdirectory before they can be
+built.
+
+*** How to build the _tkinter extension ***
+
+This assumes that you have installed the Tcl/Tk binary distribution for
+Windows 95/NT with version numbers 7.5p1/4.1p1, in the default
+installation location (C:\tcl).  (Ftp to ftp.sunlabs.com in /pub/tcl,
+file win41p1.exe.)  You must also fetch and unpack the zip file
+vclibs41.zip which contains the files tcl75.lib and tk41.lib, and place
+those files in the PC subdirectory.  In order to use _tkinter, the
+Tkinter.py module must be on PYTHONPATH.  It is found in the
+Lib\tkinter subdirectory.
+
+
+Additional files and subdirectories for 32-bit Windows
+======================================================
+
+python_nt.def  Exports definition file for python14.dll.
+
+python_nt.rc   Resource compiler input for python14.dll.
+
+dl_nt.c, getpath_nt.c, import_nt.c
+               Additional sources used for 32-bit Windows features.
+
+main_nt.c      Source for python.exe.
+
+dllbase_nt.txt A (manually maintained) list of base addresses for
+               various DLLs, to avoid run-time relocation.
+
+_tkinter.def   The export definitions file for _tkinter.dll.
+
+make_nt.in     Include file for nmake-based builds (unsupported).
+
+example_nt     A subdirectory showing how to build an extension as a
+               DLL.
+
+setup_nt       A subdirectory containing an experimental installer
+               using Python only.
+
+
+Microsoft Visual C++ Version 1.5 (16-bit Windows)
+=================================================
+
+Since VC++1.5 does not handle long file names, it is necessary
+to run the "makesrc.exe" program in this directory to copy
+Python files from the distribution to the directory "src"
+with shortened names.  Included file names are shortened too.
+Do this before you attempt to build Python.
+
+The "makesrc.exe" program is a native NT program, and you must
+have NT, Windows 95 or Win32s to run it.  Otherwise you will need
+to copy distribution files to src yourself.
+
+The makefiles are named *.mak and are located in directories
+starting with "vc15_".  NOTE:  When dependencies are scanned
+VC++ will create dependencies for directories which are not
+used because it fails to evaluate "#define" properly.  You
+must manaully edit makefiles (*.mak) to remove references to
+"sys/" and other bad directories.
+
+vc15_lib    A static Python library.  Create this first because is
+            is required for vc15_w31.
+
+vc15_w31    A Windows 3.1x Python QuickWin (console-mode)
+            Python including sockets.  Requires vc15_lib.
+
+
+Watcom C++ Version 10.6
+=======================
+
+The project file for the Watcom compiler is ./python.wpj.
+It will build Watcom versions in the directories wat_*.
+
+wat_dos     A 32-bit extended DOS Python (console-mode) using the
+            dos4gw DOS extender.  Sockets are not included.
+
+wat_os2     A 32-bit OS/2 Python (console-mode).
+            Sockets are not included.
-- 
cgit v0.12

