From 3b5da761823882d77688597c5f2e347655f83d2d Mon Sep 17 00:00:00 2001
From: Fred Drake <fdrake@acm.org>
Date: Thu, 12 Mar 1998 15:33:05 +0000
Subject: Logical markup.

---
 Doc/lib/libformatter.tex | 147 ++++++++++++++++++++++++-----------------------
 Doc/lib/libxmllib.tex    |  96 ++++++++++++++++---------------
 Doc/libformatter.tex     | 147 ++++++++++++++++++++++++-----------------------
 Doc/libxmllib.tex        |  96 ++++++++++++++++---------------
 4 files changed, 248 insertions(+), 238 deletions(-)

diff --git a/Doc/lib/libformatter.tex b/Doc/lib/libformatter.tex
index 94cd6d6..9ecd1cc 100644
--- a/Doc/lib/libformatter.tex
+++ b/Doc/lib/libformatter.tex
@@ -6,8 +6,9 @@
 
 This module supports two interface definitions, each with mulitple
 implementations.  The \emph{formatter} interface is used by the
-\code{HTMLParser} class of the \code{htmllib} module, and the
+\class{HTMLParser} class of the \module{htmllib} module, and the
 \emph{writer} interface is required by the formatter interface.
+\withsubitem{(im module htmllib)}{\ttindex{HTMLParser}}
 
 Formatter objects transform an abstract flow of formatting events into
 specific output events on writer objects.  Formatters manage several
@@ -47,17 +48,17 @@ be called without having to track whether the property was changed.
 
 The following attributes are defined for formatter instance objects:
 
-\setindexsubitem{(formatter object data)}
+\setindexsubitem{(formatter attribute)}
 
 \begin{datadesc}{writer}
 The writer instance with which the formatter interacts.
 \end{datadesc}
 
 
-\setindexsubitem{(formatter object method)}
+\setindexsubitem{(formatter method)}
 
 \begin{funcdesc}{end_paragraph}{blanklines}
-Close any open paragraphs and insert at least \code{blanklines}
+Close any open paragraphs and insert at least \var{blanklines}
 before the next paragraph.
 \end{funcdesc}
 
@@ -70,13 +71,13 @@ break the logical paragraph.
 Insert a horizontal rule in the output.  A hard break is inserted if
 there is data in the current paragraph, but the logical paragraph is
 not broken.  The arguments and keywords are passed on to the writer's
-\code{send_line_break()} method.
+\method{send_line_break()} method.
 \end{funcdesc}
 
 \begin{funcdesc}{add_flowing_data}{data}
 Provide data which should be formatted with collapsed whitespaces.
 Whitespace from preceeding and successive calls to
-\code{add_flowing_data()} is considered as well when the whitespace
+\method{add_flowing_data()} is considered as well when the whitespace
 collapse is performed.  The data which is passed to this method is
 expected to be word-wrapped by the output device.  Note that any
 word-wrapping still must be performed by the writer object due to the
@@ -86,55 +87,55 @@ need to rely on device and font information.
 \begin{funcdesc}{add_literal_data}{data}
 Provide data which should be passed to the writer unchanged.
 Whitespace, including newline and tab characters, are considered legal
-in the value of \code{data}.  
+in the value of \var{data}.  
 \end{funcdesc}
 
 \begin{funcdesc}{add_label_data}{format, counter}
 Insert a label which should be placed to the left of the current left
 margin.  This should be used for constructing bulleted or numbered
-lists.  If the \code{format} value is a string, it is interpreted as a
-format specification for \code{counter}, which should be an integer.
+lists.  If the \var{format} value is a string, it is interpreted as a
+format specification for \var{counter}, which should be an integer.
 The result of this formatting becomes the value of the label; if
-\code{format} is not a string it is used as the label value directly.
+\var{format} is not a string it is used as the label value directly.
 The label value is passed as the only argument to the writer's
-\code{send_label_data()} method.  Interpretation of non-string label
+\method{send_label_data()} method.  Interpretation of non-string label
 values is dependent on the associated writer.
 
 Format specifications are strings which, in combination with a counter
 value, are used to compute label values.  Each character in the format
 string is copied to the label value, with some characters recognized
 to indicate a transform on the counter value.  Specifically, the
-character \samp{1} represents the counter value formatter as an
-arabic number, the characters \samp{A} and \samp{a} represent
-alphabetic representations of the counter value in upper and lower
-case, respectively, and \samp{I} and \samp{i} represent the
-counter value in Roman numerals, in upper and lower case.  Note that
-the alphabetic and roman transforms require that the counter value be
-greater than zero.
+character \character{1} represents the counter value formatter as an
+arabic number, the characters \character{A} and \character{a}
+represent alphabetic representations of the counter value in upper and
+lower case, respectively, and \character{I} and \character{i}
+represent the counter value in Roman numerals, in upper and lower
+case.  Note that the alphabetic and roman transforms require that the
+counter value be greater than zero.
 \end{funcdesc}
 
 \begin{funcdesc}{flush_softspace}{}
 Send any pending whitespace buffered from a previous call to
-\code{add_flowing_data()} to the associated writer object.  This
+\method{add_flowing_data()} to the associated writer object.  This
 should be called before any direct manipulation of the writer object.
 \end{funcdesc}
 
 \begin{funcdesc}{push_alignment}{align}
 Push a new alignment setting onto the alignment stack.  This may be
-\code{AS_IS} if no change is desired.  If the alignment value is
-changed from the previous setting, the writer's \code{new_alignment()}
-method is called with the \code{align} value.
+\constant{AS_IS} if no change is desired.  If the alignment value is
+changed from the previous setting, the writer's \method{new_alignment()}
+method is called with the \var{align} value.
 \end{funcdesc}
 
 \begin{funcdesc}{pop_alignment}{}
 Restore the previous alignment.
 \end{funcdesc}
 
-\begin{funcdesc}{push_font}{(size, italic, bold, teletype)}
+\begin{funcdesc}{push_font}{\code{(}size, italic, bold, teletype\code{)}}
 Change some or all font properties of the writer object.  Properties
-which are not set to \code{AS_IS} are set to the values passed in
+which are not set to \constant{AS_IS} are set to the values passed in
 while others are maintained at their current settings.  The writer's
-\code{new_font()} method is called with the fully resolved font
+\method{new_font()} method is called with the fully resolved font
 specification.
 \end{funcdesc}
 
@@ -144,10 +145,10 @@ Restore the previous font.
 
 \begin{funcdesc}{push_margin}{margin}
 Increase the number of left margin indentations by one, associating
-the logical tag \code{margin} with the new indentation.  The initial
+the logical tag \var{margin} with the new indentation.  The initial
 margin level is \code{0}.  Changed values of the logical tag must be
-true values; false values other than \code{AS_IS} are not sufficient
-to change the margin.
+true values; false values other than \constant{AS_IS} are not
+sufficient to change the margin.
 \end{funcdesc}
 
 \begin{funcdesc}{pop_margin}{}
@@ -157,15 +158,15 @@ Restore the previous margin.
 \begin{funcdesc}{push_style}{*styles}
 Push any number of arbitrary style specifications.  All styles are
 pushed onto the styles stack in order.  A tuple representing the
-entire stack, including \code{AS_IS} values, is passed to the writer's
-\code{new_styles()} method.
+entire stack, including \constant{AS_IS} values, is passed to the
+writer's \method{new_styles()} method.
 \end{funcdesc}
 
 \begin{funcdesc}{pop_style}{\optional{n\code{ = 1}}}
-Pop the last \code{n} style specifications passed to
-\code{push_style()}.  A tuple representing the revised stack,
-including \code{AS_IS} values, is passed to the writer's
-\code{new_styles()} method.
+Pop the last \var{n} style specifications passed to
+\method{push_style()}.  A tuple representing the revised stack,
+including \constant{AS_IS} values, is passed to the writer's
+\method{new_styles()} method.
 \end{funcdesc}
 
 \begin{funcdesc}{set_spacing}{spacing}
@@ -175,7 +176,7 @@ Set the spacing style for the writer.
 \begin{funcdesc}{assert_line_data}{\optional{flag\code{ = 1}}}
 Inform the formatter that data has been added to the current paragraph
 out-of-band.  This should be used when the writer has been manipulated
-directly.  The optional \code{flag} argument can be set to false if
+directly.  The optional \var{flag} argument can be set to false if
 the writer manipulations produced a hard line break at the end of the
 output.
 \end{funcdesc}
@@ -189,20 +190,20 @@ subclassing.
 
 \setindexsubitem{(in module formatter)}
 
-\begin{funcdesc}{NullFormatter}{\optional{writer\code{ = None}}}
-A formatter which does nothing.  If \code{writer} is omitted, a
-\code{NullWriter} instance is created.  No methods of the writer are
-called by \code{NullWriter} instances.  Implementations should inherit
-from this class if implementing a writer interface but don't need to
-inherit any implementation.
-\end{funcdesc}
+\begin{classdesc}{NullFormatter}{\optional{writer}}
+A formatter which does nothing.  If \var{writer} is omitted, a
+\class{NullWriter} instance is created.  No methods of the writer are
+called by \class{NullFormatter} instances.  Implementations should
+inherit from this class if implementing a writer interface but don't
+need to inherit any implementation.
+\end{classdesc}
 
-\begin{funcdesc}{AbstractFormatter}{writer}
+\begin{classdesc}{AbstractFormatter}{writer}
 The standard formatter.  This implementation has demonstrated wide
 applicability to many writers, and may be used directly in most
 circumstances.  It has been used to implement a full-featured
 world-wide web browser.
-\end{funcdesc}
+\end{classdesc}
 
 
 
@@ -211,9 +212,9 @@ world-wide web browser.
 Interfaces to create writers are dependent on the specific writer
 class being instantiated.  The interfaces described below are the
 required interfaces which all writers must support once initialized.
-Note that while most applications can use the \code{AbstractFormatter}
-class as a formatter, the writer must typically be provided by the
-application.
+Note that while most applications can use the
+\class{AbstractFormatter} class as a formatter, the writer must
+typically be provided by the application.
 
 \setindexsubitem{(writer object method)}
 
@@ -222,40 +223,40 @@ Flush any buffered output or device control events.
 \end{funcdesc}
 
 \begin{funcdesc}{new_alignment}{align}
-Set the alignment style.  The \code{align} value can be any object,
+Set the alignment style.  The \var{align} value can be any object,
 but by convention is a string or \code{None}, where \code{None}
 indicates that the writer's ``preferred'' alignment should be used.
-Conventional \code{align} values are \code{'left'}, \code{'center'},
+Conventional \var{align} values are \code{'left'}, \code{'center'},
 \code{'right'}, and \code{'justify'}.
 \end{funcdesc}
 
 \begin{funcdesc}{new_font}{font}
-Set the font style.  The value of \code{font} will be \code{None},
+Set the font style.  The value of \var{font} will be \code{None},
 indicating that the device's default font should be used, or a tuple
-of the form (\var{size}, \var{italic}, \var{bold}, \var{teletype}).
-Size will be a string indicating the size of font that should be used;
-specific strings and their interpretation must be defined by the
-application.  The \var{italic}, \var{bold}, and \var{teletype} values
-are boolean indicators specifying which of those font attributes
-should be used.
+of the form \code{(}\var{size}, \var{italic}, \var{bold},
+\var{teletype}\code{)}.  Size will be a string indicating the size of
+font that should be used; specific strings and their interpretation
+must be defined by the application.  The \var{italic}, \var{bold}, and
+\var{teletype} values are boolean indicators specifying which of those
+font attributes should be used.
 \end{funcdesc}
 
 \begin{funcdesc}{new_margin}{margin, level}
-Set the margin level to the integer \code{level} and the logical tag
-to \code{margin}.  Interpretation of the logical tag is at the
+Set the margin level to the integer \var{level} and the logical tag
+to \var{margin}.  Interpretation of the logical tag is at the
 writer's discretion; the only restriction on the value of the logical
 tag is that it not be a false value for non-zero values of
-\code{level}.
+\var{level}.
 \end{funcdesc}
 
 \begin{funcdesc}{new_spacing}{spacing}
-Set the spacing style to \code{spacing}.
+Set the spacing style to \var{spacing}.
 \end{funcdesc}
 
 \begin{funcdesc}{new_styles}{styles}
-Set additional styles.  The \code{styles} value is a tuple of
-arbitrary values; the value \code{AS_IS} should be ignored.  The
-\code{styles} tuple may be interpreted either as a set or as a stack
+Set additional styles.  The \var{styles} value is a tuple of
+arbitrary values; the value \constant{AS_IS} should be ignored.  The
+\var{styles} tuple may be interpreted either as a set or as a stack
 depending on the requirements of the application and writer
 implementation.
 \end{funcdesc}
@@ -265,8 +266,8 @@ Break the current line.
 \end{funcdesc}
 
 \begin{funcdesc}{send_paragraph}{blankline}
-Produce a paragraph separation of at least \code{blankline} blank
-lines, or the equivelent.  The \code{blankline} value will be an
+Produce a paragraph separation of at least \var{blankline} blank
+lines, or the equivelent.  The \var{blankline} value will be an
 integer.
 \end{funcdesc}
 
@@ -274,7 +275,7 @@ integer.
 Display a horizontal rule on the output device.  The arguments to this
 method are entirely application- and writer-specific, and should be
 interpreted with care.  The method implementation may assume that a
-line break has already been issued via \code{send_line_break()}.
+line break has already been issued via \method{send_line_break()}.
 \end{funcdesc}
 
 \begin{funcdesc}{send_flowing_data}{data}
@@ -290,12 +291,12 @@ for display.  Generally, this should be interpreted to mean that line
 breaks indicated by newline characters should be preserved and no new
 line breaks should be introduced.  The data may contain embedded
 newline and tab characters, unlike data provided to the
-\code{send_formatted_data()} interface.
+\method{send_formatted_data()} interface.
 \end{funcdesc}
 
 \begin{funcdesc}{send_label_data}{data}
-Set \code{data} to the left of the current left margin, if possible.
-The value of \code{data} is not restricted; treatment of non-string
+Set \var{data} to the left of the current left margin, if possible.
+The value of \var{data} is not restricted; treatment of non-string
 values is entirely application- and writer-dependent.  This method
 will only be called at the beginning of a line.
 \end{funcdesc}
@@ -305,7 +306,7 @@ will only be called at the beginning of a line.
 
 Three implementations of the writer object interface are provided as
 examples by this module.  Most applications will need to derive new
-writer classes from the \code{NullWriter} class.
+writer classes from the \class{NullWriter} class.
 
 \setindexsubitem{(in module formatter)}
 
@@ -321,10 +322,10 @@ else.  Each method simply announces itself by printing its name and
 arguments on standard output.
 \end{funcdesc}
 
-\begin{funcdesc}{DumbWriter}{\optional{file\code{ = None}\optional{\, maxcol\code{ = 72}}}}
+\begin{funcdesc}{DumbWriter}{\optional{file\optional{\, maxcol\code{ = 72}}}}
 Simple writer class which writes output on the file object passed in
-as \code{file} or, if \code{file} is omitted, on standard output.  The
+as \var{file} or, if \var{file} is omitted, on standard output.  The
 output is simply word-wrapped to the number of columns specified by
-\code{maxcol}.  This class is suitable for reflowing a sequence of
+\var{maxcol}.  This class is suitable for reflowing a sequence of
 paragraphs.
 \end{funcdesc}
diff --git a/Doc/lib/libxmllib.tex b/Doc/lib/libxmllib.tex
index 1177c7e..ba9e006 100644
--- a/Doc/lib/libxmllib.tex
+++ b/Doc/lib/libxmllib.tex
@@ -4,11 +4,14 @@
 \stmodindex{xmllib}
 \index{XML}
 
-This module defines a class \code{XMLParser} which serves as the basis 
+This module defines a class \class{XMLParser} which serves as the basis 
 for parsing text files formatted in XML (eXtended Markup Language).
 
-The \code{XMLParser} class must be instantiated without arguments.  It 
-has the following interface methods:
+\begin{classdesc}{XMLParser}{}
+The \class{XMLParser} class must be instantiated without arguments.
+\end{classdesc}
+
+This class provides the following interface methods:
 
 \setindexsubitem{(XMLParser method)}
 
@@ -29,40 +32,40 @@ Enter literal mode (CDATA mode).
 \begin{funcdesc}{feed}{data}
 Feed some text to the parser.  It is processed insofar as it consists
 of complete elements; incomplete data is buffered until more data is
-fed or \code{close()} is called.
+fed or \method{close()} is called.
 \end{funcdesc}
 
 \begin{funcdesc}{close}{}
 Force processing of all buffered data as if it were followed by an
 end-of-file mark.  This method may be redefined by a derived class to
 define additional processing at the end of the input, but the
-redefined version should always call \code{XMLParser.close()}.
+redefined version should always call \method{close()}.
 \end{funcdesc}
 
 \begin{funcdesc}{translate_references}{data}
-Translate all entity and character references in \code{data} and
+Translate all entity and character references in \var{data} and
 returns the translated string.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_xml}{encoding\, standalone}
+\begin{funcdesc}{handle_xml}{encoding, standalone}
 This method is called when the \code{<?xml ...?>} tag is processed.
 The arguments are the values of the encoding and standalone attributes 
 in the tag.  Both encoding and standalone are optional.  The values
-passed to \code{handle_xml} default to \code{None} and the string
+passed to \method{handle_xml()} default to \code{None} and the string
 \code{'no'} respectively.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_doctype}{tag\, data}
+\begin{funcdesc}{handle_doctype}{tag, data}
 This method is called when the \code{<!DOCTYPE...>} tag is processed.
 The arguments are the name of the root element and the uninterpreted
 contents of the tag, starting after the white space after the name of
 the root element.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_starttag}{tag\, method\, attributes}
+\begin{funcdesc}{handle_starttag}{tag, method, attributes}
 This method is called to handle start tags for which a
-\code{start_\var{tag}()} method has been defined.  The \code{tag}
-argument is the name of the tag, and the \code{method} argument is the
+\code{start_\var{tag}()} method has been defined.  The \var{tag}
+argument is the name of the tag, and the \method{method} argument is the
 bound method which should be used to support semantic interpretation
 of the start tag.  The \var{attributes} argument is a dictionary of
 attributes, the key being the \var{name} and the value being the
@@ -71,19 +74,19 @@ Character and entity references in the \var{value} have
 been interpreted.  For instance, for the tag
 \code{<A HREF="http://www.cwi.nl/">}, this method would be called as
 \code{handle_starttag('A', self.start_A, \{'HREF': 'http://www.cwi.nl/'\})}.
-The base implementation simply calls \code{method} with \code{attributes}
+The base implementation simply calls \var{method} with \var{attributes}
 as the only argument.
 \end{funcdesc}
 
 \begin{funcdesc}{handle_endtag}{tag\, method}
 This method is called to handle endtags for which an
-\code{end_\var{tag}()} method has been defined.  The \code{tag}
+\code{end_\var{tag}()} method has been defined.  The \var{tag}
 argument is the name of the tag, and the
-\code{method} argument is the bound method which should be used to
+\var{method} argument is the bound method which should be used to
 support semantic interpretation of the end tag.  If no
 \code{end_\var{tag}()} method is defined for the closing element, this
 handler is not called.  The base implementation simply calls
-\code{method}.
+\var{method}.
 \end{funcdesc}
 
 \begin{funcdesc}{handle_data}{data}
@@ -98,7 +101,7 @@ This method is called to process a character reference of the form
 or a hexadecimal number when preceded by \code{x}.
 In the base implementation, \var{ref} must be a number in the
 range 0-255.  It translates the character to \ASCII{} and calls the
-method \code{handle_data()} with the character as argument.  If
+method \method{handle_data()} with the character as argument.  If
 \var{ref} is invalid or out of range, the method
 \code{unknown_charref(\var{ref})} is called to handle the error.  A
 subclass must override this method to provide support for character
@@ -106,21 +109,21 @@ references outside of the \ASCII{} range.
 \end{funcdesc}
 
 \begin{funcdesc}{handle_entityref}{ref}
-This method is called to process a general entity reference of the form
-\samp{\&\var{ref};} where \var{ref} is an general entity
+This method is called to process a general entity reference of the
+form \samp{\&\var{ref};} where \var{ref} is an general entity
 reference.  It looks for \var{ref} in the instance (or class)
-variable \code{entitydefs} which should be a mapping from entity names
-to corresponding translations.
-If a translation is found, it calls the method \code{handle_data()}
+variable \member{entitydefs} which should be a mapping from entity
+names to corresponding translations.
+If a translation is found, it calls the method \method{handle_data()}
 with the translation; otherwise, it calls the method
-\code{unknown_entityref(\var{ref})}.  The default \code{entitydefs}
+\code{unknown_entityref(\var{ref})}.  The default \member{entitydefs}
 defines translations for \code{\&amp;}, \code{\&apos}, \code{\&gt;},
 \code{\&lt;}, and \code{\&quot;}.
 \end{funcdesc}
 
 \begin{funcdesc}{handle_comment}{comment}
 This method is called when a comment is encountered.  The
-\code{comment} argument is a string containing the text between the
+\var{comment} argument is a string containing the text between the
 \samp{<!--} and \samp{-->} delimiters, but not the delimiters
 themselves.  For example, the comment \samp{<!--text-->} will
 cause this method to be called with the argument \code{'text'}.  The
@@ -129,27 +132,27 @@ default method does nothing.
 
 \begin{funcdesc}{handle_cdata}{data}
 This method is called when a CDATA element is encountered.  The
-\code{data} argument is a string containing the text between the
+\var{data} argument is a string containing the text between the
 \samp{<![CDATA[} and \samp{]]>} delimiters, but not the delimiters
 themselves.  For example, the entity \samp{<![CDATA[text]]>} will
 cause this method to be called with the argument \code{'text'}.  The
-default method does nothing.
+default method does nothing, and is intended to be overridden.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_proc}{name\, data}
-This method is called when a processing instruction (PI) is encountered.  The
-\code{name} is the PI target, and the \code{data} argument is a
-string containing the text between the PI target and the closing delimiter,
-but not the delimiter itself.  For example, the instruction
-\samp{<?XML text?>} will cause this method to be called with the
-arguments \code{'XML'} and \code{'text'}.  The default method does
-nothing.  Note that if a document starts with a \code{<?xml ...?>}
-tag, \code{handle_xml} is called to handle it.
+\begin{funcdesc}{handle_proc}{name, data}
+This method is called when a processing instruction (PI) is
+encountered.  The \var{name} is the PI target, and the \var{data}
+argument is a string containing the text between the PI target and the
+closing delimiter, but not the delimiter itself.  For example, the
+instruction \samp{<?XML text?>} will cause this method to be called
+with the arguments \code{'XML'} and \code{'text'}.  The default method
+does nothing.  Note that if a document starts with \code{<?xml
+...?>}, \method{handle_xml()} is called to handle it.
 \end{funcdesc}
 
 \begin{funcdesc}{handle_special}{data}
 This method is called when a declaration is encountered.  The
-\code{data} argument is a string containing the text between the
+\var{data} argument is a string containing the text between the
 \samp{<!} and \samp{>} delimiters, but not the delimiters
 themselves.  For example, the entity \samp{<!ENTITY text>} will
 cause this method to be called with the argument \code{'ENTITY text'}.  The
@@ -159,11 +162,12 @@ handled separately if it is located at the start of the document.
 
 \begin{funcdesc}{syntax_error}{message}
 This method is called when a syntax error is encountered.  The
-\code{message} is a description of what was wrong.  The default method 
-raises a \code{RuntimeError} exception.  If this method is overridden, 
-it is permissable for it to return.  This method is only called when
-the error can be recovered from.  Unrecoverable errors raise a
-\code{RuntimeError} without first calling \code{syntax_error}.
+\var{message} is a description of what was wrong.  The default method 
+raises a \exception{RuntimeError} exception.  If this method is
+overridden, it is permissable for it to return.  This method is only
+called when the error can be recovered from.  Unrecoverable errors
+raise a \exception{RuntimeError} without first calling
+\method{syntax_error()}.
 \end{funcdesc}
 
 \begin{funcdesc}{unknown_starttag}{tag\, attributes}
@@ -199,8 +203,8 @@ correct case:
 \begin{funcdescni}{start_\var{tag}}{attributes}
 This method is called to process an opening tag \var{tag}.  The
 \var{attributes} argument has the same meaning as described for
-\code{handle_starttag()} above.  In fact, the base implementation of
-\code{handle_starttag()} calls this method.
+\method{handle_starttag()} above.  In fact, the base implementation of
+\method{handle_starttag()} calls this method.
 \end{funcdescni}
 
 \begin{funcdescni}{end_\var{tag}}{}
@@ -215,7 +219,7 @@ the keys are the valid attributes for the element \var{tag}, and the
 values the default values of the attributes, or \code{None} if there
 is no default.
 In addition to the attributes that were present in the tag, the
-attribute dictionary that is passed to \code{handle_starttag()} and
-\code{unknown_starttag()} contains values for all attributes that have a
-default value.
+attribute dictionary that is passed to \method{handle_starttag()} and
+\method{unknown_starttag()} contains values for all attributes that
+have a default value.
 \end{datadescni}
diff --git a/Doc/libformatter.tex b/Doc/libformatter.tex
index 94cd6d6..9ecd1cc 100644
--- a/Doc/libformatter.tex
+++ b/Doc/libformatter.tex
@@ -6,8 +6,9 @@
 
 This module supports two interface definitions, each with mulitple
 implementations.  The \emph{formatter} interface is used by the
-\code{HTMLParser} class of the \code{htmllib} module, and the
+\class{HTMLParser} class of the \module{htmllib} module, and the
 \emph{writer} interface is required by the formatter interface.
+\withsubitem{(im module htmllib)}{\ttindex{HTMLParser}}
 
 Formatter objects transform an abstract flow of formatting events into
 specific output events on writer objects.  Formatters manage several
@@ -47,17 +48,17 @@ be called without having to track whether the property was changed.
 
 The following attributes are defined for formatter instance objects:
 
-\setindexsubitem{(formatter object data)}
+\setindexsubitem{(formatter attribute)}
 
 \begin{datadesc}{writer}
 The writer instance with which the formatter interacts.
 \end{datadesc}
 
 
-\setindexsubitem{(formatter object method)}
+\setindexsubitem{(formatter method)}
 
 \begin{funcdesc}{end_paragraph}{blanklines}
-Close any open paragraphs and insert at least \code{blanklines}
+Close any open paragraphs and insert at least \var{blanklines}
 before the next paragraph.
 \end{funcdesc}
 
@@ -70,13 +71,13 @@ break the logical paragraph.
 Insert a horizontal rule in the output.  A hard break is inserted if
 there is data in the current paragraph, but the logical paragraph is
 not broken.  The arguments and keywords are passed on to the writer's
-\code{send_line_break()} method.
+\method{send_line_break()} method.
 \end{funcdesc}
 
 \begin{funcdesc}{add_flowing_data}{data}
 Provide data which should be formatted with collapsed whitespaces.
 Whitespace from preceeding and successive calls to
-\code{add_flowing_data()} is considered as well when the whitespace
+\method{add_flowing_data()} is considered as well when the whitespace
 collapse is performed.  The data which is passed to this method is
 expected to be word-wrapped by the output device.  Note that any
 word-wrapping still must be performed by the writer object due to the
@@ -86,55 +87,55 @@ need to rely on device and font information.
 \begin{funcdesc}{add_literal_data}{data}
 Provide data which should be passed to the writer unchanged.
 Whitespace, including newline and tab characters, are considered legal
-in the value of \code{data}.  
+in the value of \var{data}.  
 \end{funcdesc}
 
 \begin{funcdesc}{add_label_data}{format, counter}
 Insert a label which should be placed to the left of the current left
 margin.  This should be used for constructing bulleted or numbered
-lists.  If the \code{format} value is a string, it is interpreted as a
-format specification for \code{counter}, which should be an integer.
+lists.  If the \var{format} value is a string, it is interpreted as a
+format specification for \var{counter}, which should be an integer.
 The result of this formatting becomes the value of the label; if
-\code{format} is not a string it is used as the label value directly.
+\var{format} is not a string it is used as the label value directly.
 The label value is passed as the only argument to the writer's
-\code{send_label_data()} method.  Interpretation of non-string label
+\method{send_label_data()} method.  Interpretation of non-string label
 values is dependent on the associated writer.
 
 Format specifications are strings which, in combination with a counter
 value, are used to compute label values.  Each character in the format
 string is copied to the label value, with some characters recognized
 to indicate a transform on the counter value.  Specifically, the
-character \samp{1} represents the counter value formatter as an
-arabic number, the characters \samp{A} and \samp{a} represent
-alphabetic representations of the counter value in upper and lower
-case, respectively, and \samp{I} and \samp{i} represent the
-counter value in Roman numerals, in upper and lower case.  Note that
-the alphabetic and roman transforms require that the counter value be
-greater than zero.
+character \character{1} represents the counter value formatter as an
+arabic number, the characters \character{A} and \character{a}
+represent alphabetic representations of the counter value in upper and
+lower case, respectively, and \character{I} and \character{i}
+represent the counter value in Roman numerals, in upper and lower
+case.  Note that the alphabetic and roman transforms require that the
+counter value be greater than zero.
 \end{funcdesc}
 
 \begin{funcdesc}{flush_softspace}{}
 Send any pending whitespace buffered from a previous call to
-\code{add_flowing_data()} to the associated writer object.  This
+\method{add_flowing_data()} to the associated writer object.  This
 should be called before any direct manipulation of the writer object.
 \end{funcdesc}
 
 \begin{funcdesc}{push_alignment}{align}
 Push a new alignment setting onto the alignment stack.  This may be
-\code{AS_IS} if no change is desired.  If the alignment value is
-changed from the previous setting, the writer's \code{new_alignment()}
-method is called with the \code{align} value.
+\constant{AS_IS} if no change is desired.  If the alignment value is
+changed from the previous setting, the writer's \method{new_alignment()}
+method is called with the \var{align} value.
 \end{funcdesc}
 
 \begin{funcdesc}{pop_alignment}{}
 Restore the previous alignment.
 \end{funcdesc}
 
-\begin{funcdesc}{push_font}{(size, italic, bold, teletype)}
+\begin{funcdesc}{push_font}{\code{(}size, italic, bold, teletype\code{)}}
 Change some or all font properties of the writer object.  Properties
-which are not set to \code{AS_IS} are set to the values passed in
+which are not set to \constant{AS_IS} are set to the values passed in
 while others are maintained at their current settings.  The writer's
-\code{new_font()} method is called with the fully resolved font
+\method{new_font()} method is called with the fully resolved font
 specification.
 \end{funcdesc}
 
@@ -144,10 +145,10 @@ Restore the previous font.
 
 \begin{funcdesc}{push_margin}{margin}
 Increase the number of left margin indentations by one, associating
-the logical tag \code{margin} with the new indentation.  The initial
+the logical tag \var{margin} with the new indentation.  The initial
 margin level is \code{0}.  Changed values of the logical tag must be
-true values; false values other than \code{AS_IS} are not sufficient
-to change the margin.
+true values; false values other than \constant{AS_IS} are not
+sufficient to change the margin.
 \end{funcdesc}
 
 \begin{funcdesc}{pop_margin}{}
@@ -157,15 +158,15 @@ Restore the previous margin.
 \begin{funcdesc}{push_style}{*styles}
 Push any number of arbitrary style specifications.  All styles are
 pushed onto the styles stack in order.  A tuple representing the
-entire stack, including \code{AS_IS} values, is passed to the writer's
-\code{new_styles()} method.
+entire stack, including \constant{AS_IS} values, is passed to the
+writer's \method{new_styles()} method.
 \end{funcdesc}
 
 \begin{funcdesc}{pop_style}{\optional{n\code{ = 1}}}
-Pop the last \code{n} style specifications passed to
-\code{push_style()}.  A tuple representing the revised stack,
-including \code{AS_IS} values, is passed to the writer's
-\code{new_styles()} method.
+Pop the last \var{n} style specifications passed to
+\method{push_style()}.  A tuple representing the revised stack,
+including \constant{AS_IS} values, is passed to the writer's
+\method{new_styles()} method.
 \end{funcdesc}
 
 \begin{funcdesc}{set_spacing}{spacing}
@@ -175,7 +176,7 @@ Set the spacing style for the writer.
 \begin{funcdesc}{assert_line_data}{\optional{flag\code{ = 1}}}
 Inform the formatter that data has been added to the current paragraph
 out-of-band.  This should be used when the writer has been manipulated
-directly.  The optional \code{flag} argument can be set to false if
+directly.  The optional \var{flag} argument can be set to false if
 the writer manipulations produced a hard line break at the end of the
 output.
 \end{funcdesc}
@@ -189,20 +190,20 @@ subclassing.
 
 \setindexsubitem{(in module formatter)}
 
-\begin{funcdesc}{NullFormatter}{\optional{writer\code{ = None}}}
-A formatter which does nothing.  If \code{writer} is omitted, a
-\code{NullWriter} instance is created.  No methods of the writer are
-called by \code{NullWriter} instances.  Implementations should inherit
-from this class if implementing a writer interface but don't need to
-inherit any implementation.
-\end{funcdesc}
+\begin{classdesc}{NullFormatter}{\optional{writer}}
+A formatter which does nothing.  If \var{writer} is omitted, a
+\class{NullWriter} instance is created.  No methods of the writer are
+called by \class{NullFormatter} instances.  Implementations should
+inherit from this class if implementing a writer interface but don't
+need to inherit any implementation.
+\end{classdesc}
 
-\begin{funcdesc}{AbstractFormatter}{writer}
+\begin{classdesc}{AbstractFormatter}{writer}
 The standard formatter.  This implementation has demonstrated wide
 applicability to many writers, and may be used directly in most
 circumstances.  It has been used to implement a full-featured
 world-wide web browser.
-\end{funcdesc}
+\end{classdesc}
 
 
 
@@ -211,9 +212,9 @@ world-wide web browser.
 Interfaces to create writers are dependent on the specific writer
 class being instantiated.  The interfaces described below are the
 required interfaces which all writers must support once initialized.
-Note that while most applications can use the \code{AbstractFormatter}
-class as a formatter, the writer must typically be provided by the
-application.
+Note that while most applications can use the
+\class{AbstractFormatter} class as a formatter, the writer must
+typically be provided by the application.
 
 \setindexsubitem{(writer object method)}
 
@@ -222,40 +223,40 @@ Flush any buffered output or device control events.
 \end{funcdesc}
 
 \begin{funcdesc}{new_alignment}{align}
-Set the alignment style.  The \code{align} value can be any object,
+Set the alignment style.  The \var{align} value can be any object,
 but by convention is a string or \code{None}, where \code{None}
 indicates that the writer's ``preferred'' alignment should be used.
-Conventional \code{align} values are \code{'left'}, \code{'center'},
+Conventional \var{align} values are \code{'left'}, \code{'center'},
 \code{'right'}, and \code{'justify'}.
 \end{funcdesc}
 
 \begin{funcdesc}{new_font}{font}
-Set the font style.  The value of \code{font} will be \code{None},
+Set the font style.  The value of \var{font} will be \code{None},
 indicating that the device's default font should be used, or a tuple
-of the form (\var{size}, \var{italic}, \var{bold}, \var{teletype}).
-Size will be a string indicating the size of font that should be used;
-specific strings and their interpretation must be defined by the
-application.  The \var{italic}, \var{bold}, and \var{teletype} values
-are boolean indicators specifying which of those font attributes
-should be used.
+of the form \code{(}\var{size}, \var{italic}, \var{bold},
+\var{teletype}\code{)}.  Size will be a string indicating the size of
+font that should be used; specific strings and their interpretation
+must be defined by the application.  The \var{italic}, \var{bold}, and
+\var{teletype} values are boolean indicators specifying which of those
+font attributes should be used.
 \end{funcdesc}
 
 \begin{funcdesc}{new_margin}{margin, level}
-Set the margin level to the integer \code{level} and the logical tag
-to \code{margin}.  Interpretation of the logical tag is at the
+Set the margin level to the integer \var{level} and the logical tag
+to \var{margin}.  Interpretation of the logical tag is at the
 writer's discretion; the only restriction on the value of the logical
 tag is that it not be a false value for non-zero values of
-\code{level}.
+\var{level}.
 \end{funcdesc}
 
 \begin{funcdesc}{new_spacing}{spacing}
-Set the spacing style to \code{spacing}.
+Set the spacing style to \var{spacing}.
 \end{funcdesc}
 
 \begin{funcdesc}{new_styles}{styles}
-Set additional styles.  The \code{styles} value is a tuple of
-arbitrary values; the value \code{AS_IS} should be ignored.  The
-\code{styles} tuple may be interpreted either as a set or as a stack
+Set additional styles.  The \var{styles} value is a tuple of
+arbitrary values; the value \constant{AS_IS} should be ignored.  The
+\var{styles} tuple may be interpreted either as a set or as a stack
 depending on the requirements of the application and writer
 implementation.
 \end{funcdesc}
@@ -265,8 +266,8 @@ Break the current line.
 \end{funcdesc}
 
 \begin{funcdesc}{send_paragraph}{blankline}
-Produce a paragraph separation of at least \code{blankline} blank
-lines, or the equivelent.  The \code{blankline} value will be an
+Produce a paragraph separation of at least \var{blankline} blank
+lines, or the equivelent.  The \var{blankline} value will be an
 integer.
 \end{funcdesc}
 
@@ -274,7 +275,7 @@ integer.
 Display a horizontal rule on the output device.  The arguments to this
 method are entirely application- and writer-specific, and should be
 interpreted with care.  The method implementation may assume that a
-line break has already been issued via \code{send_line_break()}.
+line break has already been issued via \method{send_line_break()}.
 \end{funcdesc}
 
 \begin{funcdesc}{send_flowing_data}{data}
@@ -290,12 +291,12 @@ for display.  Generally, this should be interpreted to mean that line
 breaks indicated by newline characters should be preserved and no new
 line breaks should be introduced.  The data may contain embedded
 newline and tab characters, unlike data provided to the
-\code{send_formatted_data()} interface.
+\method{send_formatted_data()} interface.
 \end{funcdesc}
 
 \begin{funcdesc}{send_label_data}{data}
-Set \code{data} to the left of the current left margin, if possible.
-The value of \code{data} is not restricted; treatment of non-string
+Set \var{data} to the left of the current left margin, if possible.
+The value of \var{data} is not restricted; treatment of non-string
 values is entirely application- and writer-dependent.  This method
 will only be called at the beginning of a line.
 \end{funcdesc}
@@ -305,7 +306,7 @@ will only be called at the beginning of a line.
 
 Three implementations of the writer object interface are provided as
 examples by this module.  Most applications will need to derive new
-writer classes from the \code{NullWriter} class.
+writer classes from the \class{NullWriter} class.
 
 \setindexsubitem{(in module formatter)}
 
@@ -321,10 +322,10 @@ else.  Each method simply announces itself by printing its name and
 arguments on standard output.
 \end{funcdesc}
 
-\begin{funcdesc}{DumbWriter}{\optional{file\code{ = None}\optional{\, maxcol\code{ = 72}}}}
+\begin{funcdesc}{DumbWriter}{\optional{file\optional{\, maxcol\code{ = 72}}}}
 Simple writer class which writes output on the file object passed in
-as \code{file} or, if \code{file} is omitted, on standard output.  The
+as \var{file} or, if \var{file} is omitted, on standard output.  The
 output is simply word-wrapped to the number of columns specified by
-\code{maxcol}.  This class is suitable for reflowing a sequence of
+\var{maxcol}.  This class is suitable for reflowing a sequence of
 paragraphs.
 \end{funcdesc}
diff --git a/Doc/libxmllib.tex b/Doc/libxmllib.tex
index 1177c7e..ba9e006 100644
--- a/Doc/libxmllib.tex
+++ b/Doc/libxmllib.tex
@@ -4,11 +4,14 @@
 \stmodindex{xmllib}
 \index{XML}
 
-This module defines a class \code{XMLParser} which serves as the basis 
+This module defines a class \class{XMLParser} which serves as the basis 
 for parsing text files formatted in XML (eXtended Markup Language).
 
-The \code{XMLParser} class must be instantiated without arguments.  It 
-has the following interface methods:
+\begin{classdesc}{XMLParser}{}
+The \class{XMLParser} class must be instantiated without arguments.
+\end{classdesc}
+
+This class provides the following interface methods:
 
 \setindexsubitem{(XMLParser method)}
 
@@ -29,40 +32,40 @@ Enter literal mode (CDATA mode).
 \begin{funcdesc}{feed}{data}
 Feed some text to the parser.  It is processed insofar as it consists
 of complete elements; incomplete data is buffered until more data is
-fed or \code{close()} is called.
+fed or \method{close()} is called.
 \end{funcdesc}
 
 \begin{funcdesc}{close}{}
 Force processing of all buffered data as if it were followed by an
 end-of-file mark.  This method may be redefined by a derived class to
 define additional processing at the end of the input, but the
-redefined version should always call \code{XMLParser.close()}.
+redefined version should always call \method{close()}.
 \end{funcdesc}
 
 \begin{funcdesc}{translate_references}{data}
-Translate all entity and character references in \code{data} and
+Translate all entity and character references in \var{data} and
 returns the translated string.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_xml}{encoding\, standalone}
+\begin{funcdesc}{handle_xml}{encoding, standalone}
 This method is called when the \code{<?xml ...?>} tag is processed.
 The arguments are the values of the encoding and standalone attributes 
 in the tag.  Both encoding and standalone are optional.  The values
-passed to \code{handle_xml} default to \code{None} and the string
+passed to \method{handle_xml()} default to \code{None} and the string
 \code{'no'} respectively.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_doctype}{tag\, data}
+\begin{funcdesc}{handle_doctype}{tag, data}
 This method is called when the \code{<!DOCTYPE...>} tag is processed.
 The arguments are the name of the root element and the uninterpreted
 contents of the tag, starting after the white space after the name of
 the root element.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_starttag}{tag\, method\, attributes}
+\begin{funcdesc}{handle_starttag}{tag, method, attributes}
 This method is called to handle start tags for which a
-\code{start_\var{tag}()} method has been defined.  The \code{tag}
-argument is the name of the tag, and the \code{method} argument is the
+\code{start_\var{tag}()} method has been defined.  The \var{tag}
+argument is the name of the tag, and the \method{method} argument is the
 bound method which should be used to support semantic interpretation
 of the start tag.  The \var{attributes} argument is a dictionary of
 attributes, the key being the \var{name} and the value being the
@@ -71,19 +74,19 @@ Character and entity references in the \var{value} have
 been interpreted.  For instance, for the tag
 \code{<A HREF="http://www.cwi.nl/">}, this method would be called as
 \code{handle_starttag('A', self.start_A, \{'HREF': 'http://www.cwi.nl/'\})}.
-The base implementation simply calls \code{method} with \code{attributes}
+The base implementation simply calls \var{method} with \var{attributes}
 as the only argument.
 \end{funcdesc}
 
 \begin{funcdesc}{handle_endtag}{tag\, method}
 This method is called to handle endtags for which an
-\code{end_\var{tag}()} method has been defined.  The \code{tag}
+\code{end_\var{tag}()} method has been defined.  The \var{tag}
 argument is the name of the tag, and the
-\code{method} argument is the bound method which should be used to
+\var{method} argument is the bound method which should be used to
 support semantic interpretation of the end tag.  If no
 \code{end_\var{tag}()} method is defined for the closing element, this
 handler is not called.  The base implementation simply calls
-\code{method}.
+\var{method}.
 \end{funcdesc}
 
 \begin{funcdesc}{handle_data}{data}
@@ -98,7 +101,7 @@ This method is called to process a character reference of the form
 or a hexadecimal number when preceded by \code{x}.
 In the base implementation, \var{ref} must be a number in the
 range 0-255.  It translates the character to \ASCII{} and calls the
-method \code{handle_data()} with the character as argument.  If
+method \method{handle_data()} with the character as argument.  If
 \var{ref} is invalid or out of range, the method
 \code{unknown_charref(\var{ref})} is called to handle the error.  A
 subclass must override this method to provide support for character
@@ -106,21 +109,21 @@ references outside of the \ASCII{} range.
 \end{funcdesc}
 
 \begin{funcdesc}{handle_entityref}{ref}
-This method is called to process a general entity reference of the form
-\samp{\&\var{ref};} where \var{ref} is an general entity
+This method is called to process a general entity reference of the
+form \samp{\&\var{ref};} where \var{ref} is an general entity
 reference.  It looks for \var{ref} in the instance (or class)
-variable \code{entitydefs} which should be a mapping from entity names
-to corresponding translations.
-If a translation is found, it calls the method \code{handle_data()}
+variable \member{entitydefs} which should be a mapping from entity
+names to corresponding translations.
+If a translation is found, it calls the method \method{handle_data()}
 with the translation; otherwise, it calls the method
-\code{unknown_entityref(\var{ref})}.  The default \code{entitydefs}
+\code{unknown_entityref(\var{ref})}.  The default \member{entitydefs}
 defines translations for \code{\&amp;}, \code{\&apos}, \code{\&gt;},
 \code{\&lt;}, and \code{\&quot;}.
 \end{funcdesc}
 
 \begin{funcdesc}{handle_comment}{comment}
 This method is called when a comment is encountered.  The
-\code{comment} argument is a string containing the text between the
+\var{comment} argument is a string containing the text between the
 \samp{<!--} and \samp{-->} delimiters, but not the delimiters
 themselves.  For example, the comment \samp{<!--text-->} will
 cause this method to be called with the argument \code{'text'}.  The
@@ -129,27 +132,27 @@ default method does nothing.
 
 \begin{funcdesc}{handle_cdata}{data}
 This method is called when a CDATA element is encountered.  The
-\code{data} argument is a string containing the text between the
+\var{data} argument is a string containing the text between the
 \samp{<![CDATA[} and \samp{]]>} delimiters, but not the delimiters
 themselves.  For example, the entity \samp{<![CDATA[text]]>} will
 cause this method to be called with the argument \code{'text'}.  The
-default method does nothing.
+default method does nothing, and is intended to be overridden.
 \end{funcdesc}
 
-\begin{funcdesc}{handle_proc}{name\, data}
-This method is called when a processing instruction (PI) is encountered.  The
-\code{name} is the PI target, and the \code{data} argument is a
-string containing the text between the PI target and the closing delimiter,
-but not the delimiter itself.  For example, the instruction
-\samp{<?XML text?>} will cause this method to be called with the
-arguments \code{'XML'} and \code{'text'}.  The default method does
-nothing.  Note that if a document starts with a \code{<?xml ...?>}
-tag, \code{handle_xml} is called to handle it.
+\begin{funcdesc}{handle_proc}{name, data}
+This method is called when a processing instruction (PI) is
+encountered.  The \var{name} is the PI target, and the \var{data}
+argument is a string containing the text between the PI target and the
+closing delimiter, but not the delimiter itself.  For example, the
+instruction \samp{<?XML text?>} will cause this method to be called
+with the arguments \code{'XML'} and \code{'text'}.  The default method
+does nothing.  Note that if a document starts with \code{<?xml
+...?>}, \method{handle_xml()} is called to handle it.
 \end{funcdesc}
 
 \begin{funcdesc}{handle_special}{data}
 This method is called when a declaration is encountered.  The
-\code{data} argument is a string containing the text between the
+\var{data} argument is a string containing the text between the
 \samp{<!} and \samp{>} delimiters, but not the delimiters
 themselves.  For example, the entity \samp{<!ENTITY text>} will
 cause this method to be called with the argument \code{'ENTITY text'}.  The
@@ -159,11 +162,12 @@ handled separately if it is located at the start of the document.
 
 \begin{funcdesc}{syntax_error}{message}
 This method is called when a syntax error is encountered.  The
-\code{message} is a description of what was wrong.  The default method 
-raises a \code{RuntimeError} exception.  If this method is overridden, 
-it is permissable for it to return.  This method is only called when
-the error can be recovered from.  Unrecoverable errors raise a
-\code{RuntimeError} without first calling \code{syntax_error}.
+\var{message} is a description of what was wrong.  The default method 
+raises a \exception{RuntimeError} exception.  If this method is
+overridden, it is permissable for it to return.  This method is only
+called when the error can be recovered from.  Unrecoverable errors
+raise a \exception{RuntimeError} without first calling
+\method{syntax_error()}.
 \end{funcdesc}
 
 \begin{funcdesc}{unknown_starttag}{tag\, attributes}
@@ -199,8 +203,8 @@ correct case:
 \begin{funcdescni}{start_\var{tag}}{attributes}
 This method is called to process an opening tag \var{tag}.  The
 \var{attributes} argument has the same meaning as described for
-\code{handle_starttag()} above.  In fact, the base implementation of
-\code{handle_starttag()} calls this method.
+\method{handle_starttag()} above.  In fact, the base implementation of
+\method{handle_starttag()} calls this method.
 \end{funcdescni}
 
 \begin{funcdescni}{end_\var{tag}}{}
@@ -215,7 +219,7 @@ the keys are the valid attributes for the element \var{tag}, and the
 values the default values of the attributes, or \code{None} if there
 is no default.
 In addition to the attributes that were present in the tag, the
-attribute dictionary that is passed to \code{handle_starttag()} and
-\code{unknown_starttag()} contains values for all attributes that have a
-default value.
+attribute dictionary that is passed to \method{handle_starttag()} and
+\method{unknown_starttag()} contains values for all attributes that
+have a default value.
 \end{datadescni}
-- 
cgit v0.12

