From baf71422b800622c2a2b6f783ec8404ca524f2d3 Mon Sep 17 00:00:00 2001 From: Fred Drake Date: Mon, 19 Feb 2001 16:31:02 +0000 Subject: Documentation for the difflib module, converted from the module docstrings. --- Doc/lib/libdifflib.tex | 315 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 315 insertions(+) create mode 100644 Doc/lib/libdifflib.tex diff --git a/Doc/lib/libdifflib.tex b/Doc/lib/libdifflib.tex new file mode 100644 index 0000000..61f6cb5 --- /dev/null +++ b/Doc/lib/libdifflib.tex @@ -0,0 +1,315 @@ +\section{\module{difflib} --- + Helpers for computing deltas} + +\declaremodule{standard}{difflib} +\modulesynopsis{Helpers for computing differences between objects.} +\moduleauthor{Tim Peters}{tim.one@home.com} +\sectionauthor{Tim Peters}{tim.one@home.com} +% LaTeXification by Fred L. Drake, Jr. . + +\begin{funcdesc}{get_close_matches}{word, possibilities\optional{, + n\optional{, cutoff}}} + Return a list of the best ``good enough'' matches. \var{word} is a + sequence for which close matches are desired (typically a string), + and \var{possibilities} is a list of sequences against which to + match \var{word} (typically a list of strings). + + Optional argument \var{n} (default \code{3}) is the maximum number + of close matches to return; \var{n} must be greater than \code{0}. + + Optional argument \var{cutoff} (default \code{0.6}) is a float in + the range [0, 1]. Possibilities that don't score at least that + similar to \var{word} are ignored. + + The best (no more than \var{n}) matches among the possibilities are + returned in a list, sorted by similarity score, most similar first. + +\begin{verbatim} +>>> get_close_matches('appel', ['ape', 'apple', 'peach', 'puppy']) +['apple', 'ape'] +>>> import keyword +>>> get_close_matches('wheel', keyword.kwlist) +['while'] +>>> get_close_matches('apple', keyword.kwlist) +[] +>>> get_close_matches('accept', keyword.kwlist) +['except'] +\end{verbatim} +\end{funcdesc} + +\begin{classdesc}{SequenceMatcher}{\unspecified} + This is a flexible class for comparing pairs of sequences of any + type, so long as the sequence elements are hashable. The basic + algorithm predates, and is a little fancier than, an algorithm + published in the late 1980's by Ratcliff and Obershelp under the + hyperbolic name ``gestalt pattern matching.'' The idea is to find + the longest contiguous matching subsequence that contains no + ``junk'' elements (the Ratcliff and Obershelp algorithm doesn't + address junk). The same idea is then applied recursively to the + pieces of the sequences to the left and to the right of the matching + subsequence. This does not yield minimal edit sequences, but does + tend to yield matches that ``look right'' to people. + + \strong{Timing:} The basic Ratcliff-Obershelp algorithm is cubic + time in the worst case and quadratic time in the expected case. + \class{SequenceMatcher} is quadratic time for the worst case and has + expected-case behavior dependent on how many elements the sequences + have in common; best case time (no elements in common) is linear. +\end{classdesc} + + +\subsection{SequenceMatcher Objects \label{sequence-matcher}} + +\begin{classdesc}{SequenceMatcher}{\optional{isjunk\optional{, + a\optional{, b}}}} + Optional argument \var{isjunk} must be \code{None} (the default) or + a one-argument function that takes a sequence element and returns + true if and only if the element is ``junk'' and should be ignored. + \code{None} is equivalent to passing \code{lambda x: 0}, i.e.\ no + elements are ignored. For example, pass + +\begin{verbatim} +lambda x: x in " \\t" +\end{verbatim} + + if you're comparing lines as sequences of characters, and don't want + to synch up on blanks or hard tabs. + + The optional arguments \var{a} and \var{b} are sequences to be + compared; both default to empty strings. The elements of both + sequences must be hashable. +\end{classdesc} + + +\class{SequenceMatcher} objects have the following methods: + +\begin{methoddesc}{set_seqs}{a, b} + Set the two sequences to be compared. +\end{methoddesc} + +\class{SequenceMatcher} computes and caches detailed information about +the second sequence, so if you want to compare one sequence against +many sequences, use \method{set_seq2()} to set the commonly used +sequence once and call \method{set_seq1()} repeatedly, once for each +of the other sequences. + +\begin{methoddesc}{set_seq1}{a} + Set the first sequence to be compared. The second sequence to be + compared is not changed. +\end{methoddesc} + +\begin{methoddesc}{set_seq2}{b} + Set the second sequence to be compared. The first sequence to be + compared is not changed. +\end{methoddesc} + +\begin{methoddesc}{find_longest_match}{alo, ahi, blo, bhi} + Find longest matching block in \code{\var{a}[\var{alo}:\var{ahi}]} + and \code{\var{b}[\var{blo}:\var{bhi}]}. + + If \var{isjunk} was omitted or \code{None}, + \method{get_longest_match()} returns \code{(\var{i}, \var{j}, + \var{k})} such that \code{\var{a}[\var{i}:\var{i}+\var{k}]} is equal + to \code{\var{b}[\var{j}:\var{j}+\var{k}]}, where + \code{\var{alo} <= \var{i} <= \var{i}+\var{k} <= \var{ahi}} and + \code{\var{blo} <= \var{j} <= \var{j}+\var{k} <= \var{bhi}}. + For all \code{(\var{i'}, \var{j'}, \var{k'})} meeting those + conditions, the additional conditions + \code{\var{k} >= \var{k'}}, + \code{\var{i} <= \var{i'}}, + and if \code{\var{i} == \var{i'}}, \code{\var{j} <= \var{j'}} + are also met. + In other words, of all maximal matching blocks, return one that + starts earliest in \var{a}, and of all those maximal matching blocks + that start earliest in \var{a}, return the one that starts earliest + in \var{b}. + +\begin{verbatim} +>>> s = SequenceMatcher(None, " abcd", "abcd abcd") +>>> s.find_longest_match(0, 5, 0, 9) +(0, 4, 5) +\end{verbatim} + + If \var{isjunk} was provided, first the longest matching block is + determined as above, but with the additional restriction that no + junk element appears in the block. Then that block is extended as + far as possible by matching (only) junk elements on both sides. + So the resulting block never matches on junk except as identical + junk happens to be adjacent to an interesting match. + + Here's the same example as before, but considering blanks to be junk. + That prevents \code{' abcd'} from matching the \code{ abcd} at the + tail end of the second sequence directly. Instead only the + \code{'abcd'} can match, and matches the leftmost \code{'abcd'} in + the second sequence: + +\begin{verbatim} +>>> s = SequenceMatcher(lambda x: x==" ", " abcd", "abcd abcd") +>>> s.find_longest_match(0, 5, 0, 9) +(1, 0, 4) +\end{verbatim} + + If no blocks match, this returns \code{(\var{alo}, \var{blo}, 0)}. +\end{methoddesc} + +\begin{methoddesc}{get_matching_blocks}{} + Return list of triples describing matching subsequences. + Each triple is of the form \code{(\var{i}, \var{j}, \var{n})}, and + means that \code{\var{a}[\var{i}:\var{i}+\var{n}] == + \var{b}[\var{j}:\var{j}+\var{n}]}. The triples are monotonically + increasing in \var{i} and \var{j}. + + The last triple is a dummy, and has the value \code{(len(\var{a}), + len(\var{b}), 0)}. It is the only triple with \code{\var{n} == 0}. + % Explain why a dummy is used! + +\begin{verbatim} +>>> s = SequenceMatcher(None, "abxcd", "abcd") +>>> s.get_matching_blocks() +[(0, 0, 2), (3, 2, 2), (5, 4, 0)] +\end{verbatim} +\end{methoddesc} + +\begin{methoddesc}{get_opcodes}{} + Return list of 5-tuples describing how to turn \var{a} into \var{b}. + Each tuple is of the form \code{(\var{tag}, \var{i1}, \var{i2}, + \var{j1}, \var{j2})}. The first tuple has \code{\var{i1} == + \var{j1} == 0}, and remaining tuples have \var{i1} equal to the + \var{i2} from the preceeding tuple, and, likewise, \var{j1} equal to + the previous \var{j2}. + + The \var{tag} values are strings, with these meanings: + +\begin{tableii}{l|l}{code}{Value}{Meaning} + \lineii{'replace'}{\code{\var{a}[\var{i1}:\var{i2}]} should be + replaced by \code{\var{b}[\var{j1}:\var{j2}]}.} + \lineii{'delete'}{\code{\var{a}[\var{i1}:\var{i2}]} should be + deleted. Note that \code{\var{j1} == \var{j2}} in + this case.} + \lineii{'insert'}{\code{\var{b}[\var{j1}:\var{j2}]} should be + inserted at \code{\var{a}[\var{i1}:\var{i1}]}. + Note that \code{\var{i1} == \var{i2}} in this + case.} + \lineii{'equal'}{\code{\var{a}[\var{i1}:\var{i2}] == + \var{b}[\var{j1}:\var{j2}]} (the sub-sequences are + equal).} +\end{tableii} + +For example: + +\begin{verbatim} +>>> a = "qabxcd" +>>> b = "abycdf" +>>> s = SequenceMatcher(None, a, b) +>>> for tag, i1, i2, j1, j2 in s.get_opcodes(): +... print ("%7s a[%d:%d] (%s) b[%d:%d] (%s)" % +... (tag, i1, i2, a[i1:i2], j1, j2, b[j1:j2])) + delete a[0:1] (q) b[0:0] () + equal a[1:3] (ab) b[0:2] (ab) +replace a[3:4] (x) b[2:3] (y) + equal a[4:6] (cd) b[3:5] (cd) + insert a[6:6] () b[5:6] (f) +\end{verbatim} +\end{methoddesc} + +\begin{methoddesc}{ratio}{} + Return a measure of the sequences' similarity as a float in the + range [0, 1]. + + Where T is the total number of elements in both sequences, and M is + the number of matches, this is 2,0*M / T. Note that this is \code{1} + if the sequences are identical, and \code{0} if they have nothing in + common. + + This is expensive to compute if \method{get_matching_blocks()} or + \method{get_opcodes()} hasn't already been called, in which case you + may want to try \method{quick_ratio()} or + \method{real_quick_ratio()} first to get an upper bound. +\end{methoddesc} + +\begin{methoddesc}{quick_ratio}{} + Return an upper bound on \method{ratio()} relatively quickly. + + This isn't defined beyond that it is an upper bound on + \method{ratio()}, and is faster to compute. +\end{methoddesc} + +\begin{methoddesc}{real_quick_ratio}{} + Return an upper bound on \method{ratio()} very quickly. + + This isn't defined beyond that it is an upper bound on + \method{ratio()}, and is faster to compute than either + \method{ratio()} or \method{quick_ratio()}. +\end{methoddesc} + +The three methods that return the ratio of differences to similarities +can give different results due to differing levels of approximation: + +\begin{verbatim} +>>> s = SequenceMatcher(None, "abcd", "bcde") +>>> s.ratio() +0.75 +>>> s.quick_ratio() +0.75 +>>> s.real_quick_ratio() +1.0 +\end{verbatim} + + +\subsection{Examples \label{difflib-examples}} + + +This example compares two strings, considering blanks to be ``junk:'' + +\begin{verbatim} +>>> s = SequenceMatcher(lambda x: x == " ", +... "private Thread currentThread;", +... "private volatile Thread currentThread;") +\end{verbatim} + +\method{ratio()} returns a float in [0, 1], measuring the similarity +of the sequences. As a rule of thumb, a \method{ratio()} value over +0.6 means the sequences are close matches: + +\begin{verbatim} +>>> print round(s.ratio(), 3) +0.866 +\end{verbatim} + +If you're only interested in where the sequences match, +\method{get_matching_blocks()} is handy: + +\begin{verbatim} +>>> for block in s.get_matching_blocks(): +... print "a[%d] and b[%d] match for %d elements" % block +a[0] and b[0] match for 8 elements +a[8] and b[17] match for 6 elements +a[14] and b[23] match for 15 elements +a[29] and b[38] match for 0 elements +\end{verbatim} + +Note that the last tuple returned by \method{get_matching_blocks()} is +always a dummy, \code{(len(\var{a}), len(\var{b}), 0)}, and this is +the only case in which the last tuple element (number of elements +matched) is \code{0}. + +If you want to know how to change the first sequence into the second, +use \method{get_opcodes()}: + +\begin{verbatim} +>>> for opcode in s.get_opcodes(): +... print "%6s a[%d:%d] b[%d:%d]" % opcode + equal a[0:8] b[0:8] +insert a[8:8] b[8:17] + equal a[8:14] b[17:23] + equal a[14:29] b[23:38] +\end{verbatim} + +See \file{Tools/scripts/ndiff.py} from the Python source distribution +for a fancy human-friendly file differencer, which uses +\class{SequenceMatcher} both to view files as sequences of lines, and +lines as sequences of characters. + +See also the function \function{get_close_matches()} in this module, +which shows how simple code building on \class{SequenceMatcher} can be +used to do useful work. -- cgit v0.12