From b48af54ff77f72a26ee978ef601ac17a7a5798f6 Mon Sep 17 00:00:00 2001 From: Benjamin Peterson Date: Sun, 11 Apr 2010 20:43:16 +0000 Subject: Merged revisions 79464,79471,79623,79626,79630,79632,79643,79648-79649,79679,79685,79711,79761,79774,79777,79792-79794,79877,79898-79900 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r79464 | michael.foord | 2010-03-27 07:55:19 -0500 (Sat, 27 Mar 2010) | 1 line A fix for running unittest tests on platforms without the audioop module (e.g. jython and IronPython) ........ r79471 | michael.foord | 2010-03-27 14:10:11 -0500 (Sat, 27 Mar 2010) | 4 lines Addition of delta keyword argument to unittest.TestCase.assertAlmostEquals and assertNotAlmostEquals This allows the comparison of objects by specifying a maximum difference; this includes the comparing of non-numeric objects that don't support rounding. ........ r79623 | michael.foord | 2010-04-02 16:42:47 -0500 (Fri, 02 Apr 2010) | 1 line Addition of -b command line option to unittest for buffering stdout and stderr during test runs. ........ r79626 | michael.foord | 2010-04-02 17:08:29 -0500 (Fri, 02 Apr 2010) | 1 line TestResult stores original sys.stdout and tests no longer use sys.__stdout__ (etc) in tests for unittest -b command line option ........ r79630 | michael.foord | 2010-04-02 17:30:56 -0500 (Fri, 02 Apr 2010) | 1 line unittest tests no longer replace the sys.stdout put in place by regrtest ........ r79632 | michael.foord | 2010-04-02 17:55:59 -0500 (Fri, 02 Apr 2010) | 1 line Issue #8038: Addition of unittest.TestCase.assertNotRegexpMatches ........ r79643 | michael.foord | 2010-04-02 20:15:21 -0500 (Fri, 02 Apr 2010) | 1 line Support dotted module names for test discovery paths in unittest. Issue 8038. ........ r79648 | michael.foord | 2010-04-02 21:21:39 -0500 (Fri, 02 Apr 2010) | 1 line Cross platform unittest.TestResult newline handling when buffering stdout / stderr. ........ r79649 | michael.foord | 2010-04-02 21:33:55 -0500 (Fri, 02 Apr 2010) | 1 line Another attempt at a fix for unittest.test.test_result for windows line endings ........ r79679 | michael.foord | 2010-04-03 09:52:18 -0500 (Sat, 03 Apr 2010) | 1 line Adding -b command line option to the unittest usage message. ........ r79685 | michael.foord | 2010-04-03 10:20:00 -0500 (Sat, 03 Apr 2010) | 1 line Minor tweak to unittest command line usage message ........ r79711 | michael.foord | 2010-04-03 12:03:11 -0500 (Sat, 03 Apr 2010) | 1 line Documenting new features in unittest ........ r79761 | michael.foord | 2010-04-04 17:41:54 -0500 (Sun, 04 Apr 2010) | 1 line unittest documentation formatting changes ........ r79774 | michael.foord | 2010-04-04 18:28:44 -0500 (Sun, 04 Apr 2010) | 1 line Adding documentation for new unittest.main() parameters ........ r79777 | michael.foord | 2010-04-04 19:39:50 -0500 (Sun, 04 Apr 2010) | 1 line Document signal handling functions in unittest.rst ........ r79792 | michael.foord | 2010-04-05 05:26:26 -0500 (Mon, 05 Apr 2010) | 1 line Documentation fixes for unittest ........ r79793 | michael.foord | 2010-04-05 05:28:27 -0500 (Mon, 05 Apr 2010) | 1 line Furterh documentation fix for unittest.rst ........ r79794 | michael.foord | 2010-04-05 05:30:14 -0500 (Mon, 05 Apr 2010) | 1 line Further documentation fix for unittest.rst ........ r79877 | michael.foord | 2010-04-06 18:18:16 -0500 (Tue, 06 Apr 2010) | 1 line Fix module directory finding logic for dotted paths in unittest test discovery. ........ r79898 | michael.foord | 2010-04-07 18:04:22 -0500 (Wed, 07 Apr 2010) | 1 line unittest.result.TestResult does not create its buffers until they're used. It uses StringIO not cStringIO. Issue 8333. ........ r79899 | michael.foord | 2010-04-07 19:04:24 -0500 (Wed, 07 Apr 2010) | 1 line Switch regrtest to use StringIO instead of cStringIO for test_multiprocessing on Windows. Issue 8333. ........ r79900 | michael.foord | 2010-04-07 23:33:20 -0500 (Wed, 07 Apr 2010) | 1 line Correction of unittest documentation typos and omissions ........ --- Doc/library/unittest.rst | 344 ++++++++++++++++++++++++++++++----- Lib/test/regrtest.py | 4 + Lib/test/test_argparse.py | 13 +- Lib/unittest/case.py | 71 ++++++-- Lib/unittest/loader.py | 39 +++- Lib/unittest/main.py | 41 +++-- Lib/unittest/result.py | 64 ++++++- Lib/unittest/runner.py | 4 +- Lib/unittest/test/dummy.py | 1 + Lib/unittest/test/test_assertions.py | 34 ++++ Lib/unittest/test/test_break.py | 10 +- Lib/unittest/test/test_discovery.py | 11 +- Lib/unittest/test/test_loader.py | 20 +- Lib/unittest/test/test_result.py | 132 +++++++++++++- 14 files changed, 681 insertions(+), 107 deletions(-) create mode 100644 Lib/unittest/test/dummy.py diff --git a/Doc/library/unittest.rst b/Doc/library/unittest.rst index 9bd85d5..5a09d4c 100644 --- a/Doc/library/unittest.rst +++ b/Doc/library/unittest.rst @@ -74,6 +74,11 @@ need to derive from a specific class. Module :mod:`doctest` Another test-support module with a very different flavor. + `unittest2: A backport of new unittest features for Python 2.4-2.6 `_ + Many new features were added to unittest in Python 2.7, including test + discovery. unittest2 allows you to use these features with earlier + versions of Python. + `Simple Smalltalk Testing: With Patterns `_ Kent Beck's original paper on testing frameworks using the pattern shared by :mod:`unittest`. @@ -82,41 +87,13 @@ need to derive from a specific class. Third-party unittest frameworks with a lighter-weight syntax for writing tests. For example, ``assert func(10) == 42``. - `python-mock `_ and `minimock `_ - Tools for creating mock test objects (objects simulating external - resources). - - -.. _unittest-command-line-interface: - -Command Line Interface ----------------------- - -The unittest module can be used from the command line to run tests from -modules, classes or even individual test methods:: - - python -m unittest test_module1 test_module2 - python -m unittest test_module.TestClass - python -m unittest test_module.TestClass.test_method - -You can pass in a list with any combination of module names, and fully -qualified class or method names. - -You can run tests with more detail (higher verbosity) by passing in the -v flag:: - - python -m unittest -v test_module - -For a list of all the command line options:: - - python -m unittest -h - -.. versionchanged:: 3.2 - In earlier versions it was only possible to run individual test methods and - not modules or classes. - -The command line can also be used for test discovery, for running all of the -tests in a project or just a subset. + `The Python Testing Tools Taxonomy `_ + An extensive list of Python testing tools including functional testing + frameworks and mock object libraries. + `Testing in Python Mailing List `_ + A special-interest-group for discussion of testing, and testing tools, + in Python. .. _unittest-test-discovery: @@ -243,6 +220,100 @@ The above examples show the most commonly used :mod:`unittest` features which are sufficient to meet many everyday testing needs. The remainder of the documentation explores the full feature set from first principles. + +.. _unittest-command-line-interface: + +Command Line Interface +---------------------- + +The unittest module can be used from the command line to run tests from +modules, classes or even individual test methods:: + + python -m unittest test_module1 test_module2 + python -m unittest test_module.TestClass + python -m unittest test_module.TestClass.test_method + +You can pass in a list with any combination of module names, and fully +qualified class or method names. + +You can run tests with more detail (higher verbosity) by passing in the -v flag:: + + python -m unittest -v test_module + +For a list of all the command line options:: + + python -m unittest -h + +.. versionchanged:: 3.2 + In earlier versions it was only possible to run individual test methods and + not modules or classes. + + +failfast, catch and buffer command line options +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +unittest supports three command options. + +* -f / --failfast + + Stop the test run on the first error or failure. + +* -c / --catch + + Control-c during the test run waits for the current test to end and then + reports all the results so far. A second control-c raises the normal + ``KeyboardInterrupt`` exception. + + See `Signal Handling`_ for the functions that provide this functionality. + +* -b / --buffer + + The standard out and standard error streams are buffered during the test + run. Output during a passing test is discarded. Output is echoed normally + on test fail or error and is added to the failure messages. + +.. versionadded:: 2.7 + The command line options ``-c``, ``-b`` and ``-f`` where added. + +The command line can also be used for test discovery, for running all of the +tests in a project or just a subset. + + +.. _unittest-test-discovery: + +Test Discovery +-------------- + +.. versionadded:: 2.7 + +Unittest supports simple test discovery. For a project's tests to be +compatible with test discovery they must all be importable from the top level +directory of the project (in other words, they must all be in Python packages). + +Test discovery is implemented in :meth:`TestLoader.discover`, but can also be +used from the command line. The basic command line usage is:: + + cd project_directory + python -m unittest discover + +The ``discover`` sub-command has the following options: + + -v, --verbose Verbose output + -s directory Directory to start discovery ('.' default) + -p pattern Pattern to match test files ('test*.py' default) + -t directory Top level directory of project (default to + start directory) + +The -s, -p, & -t options can be passsed in as positional arguments. The +following two command lines are equivalent:: + + python -m unittest discover -s project_directory -p '*_test.py' + python -m unittest discover project_directory '*_test.py' + +Test modules and packages can customize test loading and discovery by through +the `load_tests protocol`_. + + .. _organizing-tests: Organizing test code @@ -580,6 +651,9 @@ The following decorators implement test skipping and expected failures: Mark the test as an expected failure. If the test fails when run, the test is not counted as a failure. +Skipped tests will not have :meth:`setUp` or :meth:`tearDown` run around them. +Skipped classes will not have :meth:`setUpClass` or :meth:`tearDownClass` run. + .. _unittest-contents: @@ -645,6 +719,36 @@ Test cases the outcome of the test method. The default implementation does nothing. + .. method:: setUpClass() + + A class method called before tests in an individual class run. + ``setUpClass`` is called with the class as the only argument + and must be decorated as a :func:`classmethod`:: + + @classmethod + def setUpClass(cls): + ... + + See `Class and Module Fixtures`_ for more details. + + .. versionadded:: 3.2 + + + .. method:: tearDownClass() + + A class method called after tests in an individual class have run. + ``tearDownClass`` is called with the class as the only argument + and must be decorated as a :meth:`classmethod`:: + + @classmethod + def tearDownClass(cls): + ... + + See `Class and Module Fixtures`_ for more details. + + .. versionadded:: 3.2 + + .. method:: run(result=None) Run the test, collecting the result into the test result object passed as @@ -727,8 +831,8 @@ Test cases :meth:`failIfEqual`; use :meth:`assertNotEqual`. - .. method:: assertAlmostEqual(first, second, *, places=7, msg=None) - failUnlessAlmostEqual(first, second, *, places=7, msg=None) + .. method:: assertAlmostEqual(first, second, *, places=7, msg=None, delta=None) + failUnlessAlmostEqual(first, second, *, places=7, msg=None, delta=None) Test that *first* and *second* are approximately equal by computing the difference, rounding to the given number of decimal *places* (default 7), @@ -741,13 +845,14 @@ Test cases .. versionchanged:: 3.2 Objects that compare equal are automatically almost equal. + Added the ``delta`` keyword argument. .. deprecated:: 3.1 :meth:`failUnlessAlmostEqual`; use :meth:`assertAlmostEqual`. - .. method:: assertNotAlmostEqual(first, second, *, places=7, msg=None) - failIfAlmostEqual(first, second, *, places=7, msg=None) + .. method:: assertNotAlmostEqual(first, second, *, places=7, msg=None, delta=None) + failIfAlmostEqual(first, second, *, places=7, msg=None, delta=None) Test that *first* and *second* are not approximately equal by computing the difference, rounding to the given number of decimal *places* (default @@ -758,8 +863,14 @@ Test cases compare equal, the test will fail with the explanation given by *msg*, or :const:`None`. + If *delta* is supplied instead of *places* then the the difference + between *first* and *second* must be more than *delta*. + + Supplying both *delta* and *places* raises a ``TypeError``. + .. versionchanged:: 3.2 Objects that compare equal automatically fail. + Added the ``delta`` keyword argument. .. deprecated:: 3.1 :meth:`failIfAlmostEqual`; use :meth:`assertNotAlmostEqual`. @@ -802,6 +913,16 @@ Test cases .. versionadded:: 3.1 + .. method:: assertNotRegexpMatches(text, regexp, msg=None) + + Verifies that a *regexp* search does not match *text*. Fails with an error + message including the pattern and the *text*. *regexp* may be + a regular expression object or a string containing a regular expression + suitable for use by :func:`re.search`. + + .. versionadded:: 2.7 + + .. method:: assertIn(first, second, msg=None) assertNotIn(first, second, msg=None) @@ -1342,6 +1463,8 @@ a ``load_tests`` does not need to pass this argument in to ``loader.discover()``. + *start_dir* can be a dotted module name as well as a directory. + .. versionadded:: 3.2 @@ -1433,6 +1556,24 @@ a The total number of tests run so far. + .. attribute:: buffer + + If set to true, ``sys.stdout`` and ``sys.stderr`` will be buffered in between + :meth:`startTest` and :meth:`stopTest` being called. Collected output will + only be echoed onto the real ``sys.stdout`` and ``sys.stderr`` if the test + fails or errors. Any output is also attached to the failure / error message. + + .. versionadded:: 2.7 + + + .. attribute:: failfast + + If set to true :meth:`stop` will be called on the first failure or error, + halting the test run. + + .. versionadded:: 2.7 + + .. method:: wasSuccessful() Return :const:`True` if all tests run so far have passed, otherwise returns @@ -1461,18 +1602,11 @@ a Called when the test case *test* is about to be run. - The default implementation simply increments the instance's :attr:`testsRun` - counter. - - .. method:: stopTest(test) Called after the test case *test* has been executed, regardless of the outcome. - The default implementation does nothing. - - .. method:: startTestRun(test) Called once before any tests are executed. @@ -1572,12 +1706,12 @@ a ``_makeResult()`` instantiates the class or callable passed in the ``TextTestRunner`` constructor as the ``resultclass`` argument. It - defaults to :class::`TextTestResult` if no ``resultclass`` is provided. + defaults to :class:`TextTestResult` if no ``resultclass`` is provided. The result class is instantiated with the following arguments:: stream, descriptions, verbosity -.. function:: main(module='__main__', defaultTest=None, argv=None, testRunner=None, testLoader=unittest.loader.defaultTestLoader, exit=True, verbosity=1) +.. function:: main(module='__main__', defaultTest=None, argv=None, testRunner=None, testLoader=unittest.loader.defaultTestLoader, exit=True, verbosity=1, failfast=None, catchbreak=None, buffer=None) A command-line program that runs a set of tests; this is primarily for making test modules conveniently executable. The simplest use for this function is to @@ -1603,11 +1737,15 @@ a >>> from unittest import main >>> main(module='test_module', exit=False) + The ``failfast``, ``catchbreak`` and ``buffer`` parameters have the same + effect as the `failfast, catch and buffer command line options`_. + Calling ``main`` actually returns an instance of the ``TestProgram`` class. This stores the result of the tests run as the ``result`` attribute. .. versionchanged:: 3.2 - The ``exit`` and ``verbosity`` parameters were added. + The ``exit``, ``verbosity``, ``failfast``, ``catchbreak`` and ``buffer`` + parameters were added. load_tests Protocol @@ -1677,3 +1815,113 @@ continue (and potentially modify) test discovery. A 'do nothing' package_tests = loader.discover(start_dir=this_dir, pattern=pattern) standard_tests.addTests(package_tests) return standard_tests + + +Class and Module Fixtures +------------------------- + +Class and module level fixtures are implemented in :class:`TestSuite`. When +the test suite encounters a test from a new class then :meth:`tearDownClass` +from the previous class (if there is one) is called, followed by +:meth:`setUpClass` from the new class. + +Similarly if a test is from a different module from the previous test then +``tearDownModule`` from the previous module is run, followed by +``setUpModule`` from the new module. + +After all the tests have run the final ``tearDownClass`` and +``tearDownModule`` are run. + +Note that shared fixtures do not play well with [potential] features like test +parallelization and they break test isolation. They should be used with care. + +The default ordering of tests created by the unittest test loaders is to group +all tests from the same modules and classes together. This will lead to +``setUpClass`` / ``setUpModule`` (etc) being called exactly once per class and +module. If you randomize the order, so that tests from different modules and +classes are adjacent to each other, then these shared fixture functions may be +called multiple times in a single test run. + +Shared fixtures are not intended to work with suites with non-standard +ordering. A ``BaseTestSuite`` still exists for frameworks that don't want to +support shared fixtures. + +If there are any exceptions raised during one of the shared fixture functions +the test is reported as an error. Because there is no corresponding test +instance an ``_ErrorHolder`` object (that has the same interface as a +:class:`TestCase`) is created to represent the error. If you are just using +the standard unittest test runner then this detail doesn't matter, but if you +are a framework author it may be relevant. + + +setUpClass and tearDownClass +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +These must be implemented as class methods:: + + import unittest + + class Test(unittest.TestCase): + @classmethod + def setUpClass(cls): + cls._connection = createExpensiveConnectionObject() + + @classmethod + def tearDownClass(cls): + cls._connection.destroy() + +If you want the ``setUpClass`` and ``tearDownClass`` on base classes called +then you must call up to them yourself. The implementations in +:class:`TestCase` are empty. + +If an exception is raised during a ``setUpClass`` then the tests in the class +are not run and the ``tearDownClass`` is not run. Skipped classes will not +have ``setUpClass`` or ``tearDownClass`` run. + + +setUpModule and tearDownModule +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +These should be implemented as functions:: + + def setUpModule(): + createConnection() + + def tearDownModule(): + closeConnection() + +If an exception is raised in a ``setUpModule`` then none of the tests in the +module will be run and the ``tearDownModule`` will not be run. + + +Signal Handling +--------------- + +The -c / --catch command line option to unittest, along with the ``catchbreak`` +parameter to :func:`unittest.main()`, provide more friendly handling of +control-c during a test run. With catch break behavior enabled control-c will +allow the currently running test to complete, and the test run will then end +and report all the results so far. A second control-c will raise a +``KeyboardInterrupt`` in the usual way. + +There are a few utility functions for framework authors to enable this +functionality within test frameworks. + +.. function:: installHandler() + + Install the control-c handler. When a :const:`signal.SIGINT` is received + (usually in response to the user pressing control-c) all registered results + have :meth:`~TestResult.stop` called. + +.. function:: registerResult(result) + + Register a :class:`TestResult` object for control-c handling. Registering a + result stores a weak reference to it, so it doesn't prevent the result from + being garbage collected. + +.. function:: removeResult(result) + + Remove a registered result. Once a result has been removed then + :meth:`~TestResult.stop` will no longer be called on that result object in + response to a control-c. + diff --git a/Lib/test/regrtest.py b/Lib/test/regrtest.py index f3c2a5f..fdcaf88 100755 --- a/Lib/test/regrtest.py +++ b/Lib/test/regrtest.py @@ -880,6 +880,10 @@ def runtest_inner(test, verbose, quiet, testdir=None, huntrleaks=False, debug=False): support.unload(test) testdir = findtestdir(testdir) + if verbose: + capture_stdout = None + else: + capture_stdout = io.StringIO() test_time = 0.0 refleak = False # True if the test leaked references. diff --git a/Lib/test/test_argparse.py b/Lib/test/test_argparse.py index 85513a5..f13c622 100644 --- a/Lib/test/test_argparse.py +++ b/Lib/test/test_argparse.py @@ -12,6 +12,8 @@ import argparse from io import StringIO from test import support +class StdIOBuffer(StringIO): + pass class TestCase(unittest.TestCase): @@ -25,6 +27,7 @@ class TestCase(unittest.TestCase): super(TestCase, self).assertEqual(obj1, obj2) + class TempDirMixin(object): def setUp(self): @@ -81,15 +84,15 @@ def stderr_to_parser_error(parse_args, *args, **kwargs): # if this is being called recursively and stderr or stdout is already being # redirected, simply call the function and let the enclosing function # catch the exception - if isinstance(sys.stderr, StringIO) or isinstance(sys.stdout, StringIO): + if isinstance(sys.stderr, StdIOBuffer) or isinstance(sys.stdout, StdIOBuffer): return parse_args(*args, **kwargs) # if this is not being called recursively, redirect stderr and # use it as the ArgumentParserError message old_stdout = sys.stdout old_stderr = sys.stderr - sys.stdout = StringIO() - sys.stderr = StringIO() + sys.stdout = StdIOBuffer() + sys.stderr = StdIOBuffer() try: try: result = parse_args(*args, **kwargs) @@ -2634,7 +2637,7 @@ class TestHelpFormattingMetaclass(type): parser = self._get_parser(tester) print_ = getattr(parser, 'print_%s' % self.func_suffix) old_stream = getattr(sys, self.std_name) - setattr(sys, self.std_name, StringIO()) + setattr(sys, self.std_name, StdIOBuffer()) try: print_() parser_text = getattr(sys, self.std_name).getvalue() @@ -2645,7 +2648,7 @@ class TestHelpFormattingMetaclass(type): def test_print_file(self, tester): parser = self._get_parser(tester) print_ = getattr(parser, 'print_%s' % self.func_suffix) - sfile = StringIO() + sfile = StdIOBuffer() print_(sfile) parser_text = sfile.getvalue() self._test(tester, parser_text) diff --git a/Lib/unittest/case.py b/Lib/unittest/case.py index ac5d1ec..366fe87 100644 --- a/Lib/unittest/case.py +++ b/Lib/unittest/case.py @@ -502,10 +502,12 @@ class TestCase(object): safe_repr(second))) raise self.failureException(msg) - def assertAlmostEqual(self, first, second, *, places=7, msg=None): + def assertAlmostEqual(self, first, second, *, places=None, msg=None, + delta=None): """Fail if the two objects are unequal as determined by their difference rounded to the given number of decimal places - (default 7) and comparing to zero. + (default 7) and comparing to zero, or by comparing that the + between the two objects is more than the given delta. Note that decimal places (from zero) are usually not the same as significant digits (measured from the most signficant digit). @@ -514,31 +516,62 @@ class TestCase(object): compare almost equal. """ if first == second: - # shortcut for inf + # shortcut return - if round(abs(second-first), places) != 0: + if delta is not None and places is not None: + raise TypeError("specify delta or places not both") + + if delta is not None: + if abs(first - second) <= delta: + return + + standardMsg = '%s != %s within %s delta' % (safe_repr(first), + safe_repr(second), + safe_repr(delta)) + else: + if places is None: + places = 7 + + if round(abs(second-first), places) == 0: + return + standardMsg = '%s != %s within %r places' % (safe_repr(first), safe_repr(second), places) - msg = self._formatMessage(msg, standardMsg) - raise self.failureException(msg) + msg = self._formatMessage(msg, standardMsg) + raise self.failureException(msg) - def assertNotAlmostEqual(self, first, second, *, places=7, msg=None): + def assertNotAlmostEqual(self, first, second, *, places=None, msg=None, + delta=None): """Fail if the two objects are equal as determined by their difference rounded to the given number of decimal places - (default 7) and comparing to zero. + (default 7) and comparing to zero, or by comparing that the + between the two objects is less than the given delta. Note that decimal places (from zero) are usually not the same as significant digits (measured from the most signficant digit). Objects that are equal automatically fail. """ - if (first == second) or round(abs(second-first), places) == 0: + if delta is not None and places is not None: + raise TypeError("specify delta or places not both") + if delta is not None: + if not (first == second) and abs(first - second) > delta: + return + standardMsg = '%s == %s within %s delta' % (safe_repr(first), + safe_repr(second), + safe_repr(delta)) + else: + if places is None: + places = 7 + if not (first == second) and round(abs(second-first), places) != 0: + return standardMsg = '%s == %s within %r places' % (safe_repr(first), - safe_repr(second), - places) - msg = self._formatMessage(msg, standardMsg) - raise self.failureException(msg) + safe_repr(second), + places) + + msg = self._formatMessage(msg, standardMsg) + raise self.failureException(msg) # Synonyms for assertion methods @@ -967,6 +1000,18 @@ class TestCase(object): msg = '%s: %r not found in %r' % (msg, expected_regexp.pattern, text) raise self.failureException(msg) + def assertNotRegexpMatches(self, text, unexpected_regexp, msg=None): + if isinstance(unexpected_regexp, (str, bytes)): + unexpected_regexp = re.compile(unexpected_regexp) + match = unexpected_regexp.search(text) + if match: + msg = msg or "Regexp matched" + msg = '%s: %r matches %r in %r' % (msg, + text[match.start():match.end()], + unexpected_regexp.pattern, + text) + raise self.failureException(msg) + class FunctionTestCase(TestCase): """A test case that wraps a test function. diff --git a/Lib/unittest/loader.py b/Lib/unittest/loader.py index f00f38d..a45dffa 100644 --- a/Lib/unittest/loader.py +++ b/Lib/unittest/loader.py @@ -166,27 +166,58 @@ class TestLoader(object): packages can continue discovery themselves. top_level_dir is stored so load_tests does not need to pass this argument in to loader.discover(). """ + set_implicit_top = False if top_level_dir is None and self._top_level_dir is not None: # make top_level_dir optional if called from load_tests in a package top_level_dir = self._top_level_dir elif top_level_dir is None: + set_implicit_top = True top_level_dir = start_dir - top_level_dir = os.path.abspath(os.path.normpath(top_level_dir)) - start_dir = os.path.abspath(os.path.normpath(start_dir)) + top_level_dir = os.path.abspath(top_level_dir) if not top_level_dir in sys.path: # all test modules must be importable from the top level directory sys.path.append(top_level_dir) self._top_level_dir = top_level_dir - if start_dir != top_level_dir and not os.path.isfile(os.path.join(start_dir, '__init__.py')): - # what about __init__.pyc or pyo (etc) + is_not_importable = False + if os.path.isdir(os.path.abspath(start_dir)): + start_dir = os.path.abspath(start_dir) + if start_dir != top_level_dir: + is_not_importable = not os.path.isfile(os.path.join(start_dir, '__init__.py')) + else: + # support for discovery from dotted module names + try: + __import__(start_dir) + except ImportError: + is_not_importable = True + else: + the_module = sys.modules[start_dir] + top_part = start_dir.split('.')[0] + start_dir = os.path.abspath(os.path.dirname((the_module.__file__))) + if set_implicit_top: + self._top_level_dir = self._get_directory_containing_module(top_part) + sys.path.remove(top_level_dir) + + if is_not_importable: raise ImportError('Start directory is not importable: %r' % start_dir) tests = list(self._find_tests(start_dir, pattern)) return self.suiteClass(tests) + def _get_directory_containing_module(self, module_name): + module = sys.modules[module_name] + full_path = os.path.abspath(module.__file__) + + if os.path.basename(full_path).lower().startswith('__init__.py'): + return os.path.dirname(os.path.dirname(full_path)) + else: + # here we have been given a module rather than a package - so + # all we can do is search the *same* directory the module is in + # should an exception be raised instead + return os.path.dirname(full_path) + def _get_name_from_path(self, path): path = os.path.splitext(os.path.normpath(path))[0] diff --git a/Lib/unittest/main.py b/Lib/unittest/main.py index 3e659ab..2f488e1 100644 --- a/Lib/unittest/main.py +++ b/Lib/unittest/main.py @@ -9,9 +9,9 @@ from .signals import installHandler __unittest = True - -FAILFAST = " -f, --failfast Stop on first failure\n" -CATCHBREAK = " -c, --catch Catch control-C and display results\n" +FAILFAST = " -f, --failfast Stop on first failure\n" +CATCHBREAK = " -c, --catch Catch control-C and display results\n" +BUFFEROUTPUT = " -b, --buffer Buffer stdout and stderr during test runs\n" USAGE_AS_MAIN = """\ Usage: %(progName)s [options] [tests] @@ -20,7 +20,7 @@ Options: -h, --help Show this message -v, --verbose Verbose output -q, --quiet Minimal output -%(failfast)s%(catchbreak)s +%(failfast)s%(catchbreak)s%(buffer)s Examples: %(progName)s test_module - run tests from test_module %(progName)s test_module.TestClass - run tests from @@ -34,7 +34,7 @@ Alternative Usage: %(progName)s discover [options] Options: -v, --verbose Verbose output -%(failfast)s%(catchbreak)s -s directory Directory to start discovery ('.' default) +%(failfast)s%(catchbreak)s%(buffer)s -s directory Directory to start discovery ('.' default) -p pattern Pattern to match test files ('test*.py' default) -t directory Top level directory of project (default to start directory) @@ -50,7 +50,7 @@ Options: -h, --help Show this message -v, --verbose Verbose output -q, --quiet Minimal output -%(failfast)s%(catchbreak)s +%(failfast)s%(catchbreak)s%(buffer)s Examples: %(progName)s - run default set of tests %(progName)s MyTestSuite - run suite 'MyTestSuite' @@ -68,12 +68,12 @@ class TestProgram(object): USAGE = USAGE_FROM_MODULE # defaults for testing - failfast = catchbreak = None + failfast = catchbreak = buffer = None def __init__(self, module='__main__', defaultTest=None, argv=None, testRunner=None, testLoader=loader.defaultTestLoader, exit=True, - verbosity=1, failfast=None, catchbreak=None): + verbosity=1, failfast=None, catchbreak=None, buffer=None): if isinstance(module, str): self.module = __import__(module) for part in module.split('.')[1:]: @@ -87,6 +87,7 @@ class TestProgram(object): self.failfast = failfast self.catchbreak = catchbreak self.verbosity = verbosity + self.buffer = buffer self.defaultTest = defaultTest self.testRunner = testRunner self.testLoader = testLoader @@ -97,11 +98,14 @@ class TestProgram(object): def usageExit(self, msg=None): if msg: print(msg) - usage = {'progName': self.progName, 'catchbreak': '', 'failfast': ''} + usage = {'progName': self.progName, 'catchbreak': '', 'failfast': '', + 'buffer': ''} if self.failfast != False: usage['failfast'] = FAILFAST if self.catchbreak != False: usage['catchbreak'] = CATCHBREAK + if self.buffer != False: + usage['buffer'] = BUFFEROUTPUT print(self.USAGE % usage) sys.exit(2) @@ -111,9 +115,9 @@ class TestProgram(object): return import getopt - long_opts = ['help', 'verbose', 'quiet', 'failfast', 'catch'] + long_opts = ['help', 'verbose', 'quiet', 'failfast', 'catch', 'buffer'] try: - options, args = getopt.getopt(argv[1:], 'hHvqfc', long_opts) + options, args = getopt.getopt(argv[1:], 'hHvqfcb', long_opts) for opt, value in options: if opt in ('-h','-H','--help'): self.usageExit() @@ -129,6 +133,10 @@ class TestProgram(object): if self.catchbreak is None: self.catchbreak = True # Should this raise an exception if -c is not valid? + if opt in ('-b','--buffer'): + if self.buffer is None: + self.buffer = True + # Should this raise an exception if -b is not valid? if len(args) == 0 and self.defaultTest is None: # createTests will load tests from self.module self.testNames = None @@ -164,6 +172,10 @@ class TestProgram(object): parser.add_option('-c', '--catch', dest='catchbreak', default=False, help='Catch ctrl-C and display results so far', action='store_true') + if self.buffer != False: + parser.add_option('-b', '--buffer', dest='buffer', default=False, + help='Buffer stdout and stderr during tests', + action='store_true') parser.add_option('-s', '--start-directory', dest='start', default='.', help="Directory to start discovery ('.' default)") parser.add_option('-p', '--pattern', dest='pattern', default='test*.py', @@ -184,6 +196,8 @@ class TestProgram(object): self.failfast = options.failfast if self.catchbreak is None: self.catchbreak = options.catchbreak + if self.buffer is None: + self.buffer = options.buffer if options.verbose: self.verbosity = 2 @@ -203,9 +217,10 @@ class TestProgram(object): if isinstance(self.testRunner, type): try: testRunner = self.testRunner(verbosity=self.verbosity, - failfast=self.failfast) + failfast=self.failfast, + buffer=self.buffer) except TypeError: - # didn't accept the verbosity or failfast arguments + # didn't accept the verbosity, buffer or failfast arguments testRunner = self.testRunner() else: # it is assumed to be a TestRunner instance diff --git a/Lib/unittest/result.py b/Lib/unittest/result.py index ec80e8e..92b1f91 100644 --- a/Lib/unittest/result.py +++ b/Lib/unittest/result.py @@ -1,5 +1,8 @@ """Test result object""" +import os +import io +import sys import traceback from . import util @@ -15,6 +18,10 @@ def failfast(method): return method(self, *args, **kw) return inner +STDOUT_LINE = '\nStdout:\n%s' +STDERR_LINE = '\nStderr:\n%s' + + class TestResult(object): """Holder for test result information. @@ -37,6 +44,12 @@ class TestResult(object): self.expectedFailures = [] self.unexpectedSuccesses = [] self.shouldStop = False + self.buffer = False + self._stdout_buffer = None + self._stderr_buffer = None + self._original_stdout = sys.stdout + self._original_stderr = sys.stderr + self._mirrorOutput = False def printErrors(self): "Called by TestRunner after test run" @@ -44,6 +57,13 @@ class TestResult(object): def startTest(self, test): "Called when the given test is about to be run" self.testsRun += 1 + self._mirrorOutput = False + if self.buffer: + if self._stderr_buffer is None: + self._stderr_buffer = io.StringIO() + self._stdout_buffer = io.StringIO() + sys.stdout = self._stdout_buffer + sys.stderr = self._stderr_buffer def startTestRun(self): """Called once before any tests are executed. @@ -53,6 +73,26 @@ class TestResult(object): def stopTest(self, test): """Called when the given test has been run""" + if self.buffer: + if self._mirrorOutput: + output = sys.stdout.getvalue() + error = sys.stderr.getvalue() + if output: + if not output.endswith('\n'): + output += '\n' + self._original_stdout.write(STDOUT_LINE % output) + if error: + if not error.endswith('\n'): + error += '\n' + self._original_stderr.write(STDERR_LINE % error) + + sys.stdout = self._original_stdout + sys.stderr = self._original_stderr + self._stdout_buffer.seek(0) + self._stdout_buffer.truncate() + self._stderr_buffer.seek(0) + self._stderr_buffer.truncate() + self._mirrorOutput = False def stopTestRun(self): """Called once after all tests are executed. @@ -66,12 +106,14 @@ class TestResult(object): returned by sys.exc_info(). """ self.errors.append((test, self._exc_info_to_string(err, test))) + self._mirrorOutput = True @failfast def addFailure(self, test, err): """Called when an error has occurred. 'err' is a tuple of values as returned by sys.exc_info().""" self.failures.append((test, self._exc_info_to_string(err, test))) + self._mirrorOutput = True def addSuccess(self, test): "Called when a test has completed successfully" @@ -105,11 +147,29 @@ class TestResult(object): # Skip test runner traceback levels while tb and self._is_relevant_tb_level(tb): tb = tb.tb_next + if exctype is test.failureException: # Skip assert*() traceback levels length = self._count_relevant_tb_levels(tb) - return ''.join(traceback.format_exception(exctype, value, tb, length)) - return ''.join(traceback.format_exception(exctype, value, tb)) + msgLines = traceback.format_exception(exctype, value, tb, length) + else: + chain = exctype is not None + msgLines = traceback.format_exception(exctype, value, tb, + chain=chain) + + if self.buffer: + output = sys.stdout.getvalue() + error = sys.stderr.getvalue() + if output: + if not output.endswith('\n'): + output += '\n' + msgLines.append(STDOUT_LINE % output) + if error: + if not error.endswith('\n'): + error += '\n' + msgLines.append(STDERR_LINE % error) + return ''.join(msgLines) + def _is_relevant_tb_level(self, tb): return '__unittest' in tb.tb_frame.f_globals diff --git a/Lib/unittest/runner.py b/Lib/unittest/runner.py index 8065642..f13d623f 100644 --- a/Lib/unittest/runner.py +++ b/Lib/unittest/runner.py @@ -125,11 +125,12 @@ class TextTestRunner(object): resultclass = TextTestResult def __init__(self, stream=sys.stderr, descriptions=True, verbosity=1, - failfast=False, resultclass=None): + failfast=False, buffer=False, resultclass=None): self.stream = _WritelnDecorator(stream) self.descriptions = descriptions self.verbosity = verbosity self.failfast = failfast + self.buffer = buffer if resultclass is not None: self.resultclass = resultclass @@ -141,6 +142,7 @@ class TextTestRunner(object): result = self._makeResult() registerResult(result) result.failfast = self.failfast + result.buffer = self.buffer startTime = time.time() startTestRun = getattr(result, 'startTestRun', None) if startTestRun is not None: diff --git a/Lib/unittest/test/dummy.py b/Lib/unittest/test/dummy.py new file mode 100644 index 0000000..e4f14e4 --- /dev/null +++ b/Lib/unittest/test/dummy.py @@ -0,0 +1 @@ +# Empty module for testing the loading of modules diff --git a/Lib/unittest/test/test_assertions.py b/Lib/unittest/test/test_assertions.py index fe65849..06b1ab8e5 100644 --- a/Lib/unittest/test/test_assertions.py +++ b/Lib/unittest/test/test_assertions.py @@ -1,3 +1,5 @@ +import datetime + import unittest @@ -25,6 +27,28 @@ class Test_Assertions(unittest.TestCase): self.assertRaises(self.failureException, self.assertNotAlmostEqual, float('inf'), float('inf')) + def test_AmostEqualWithDelta(self): + self.assertAlmostEqual(1.1, 1.0, delta=0.5) + self.assertAlmostEqual(1.0, 1.1, delta=0.5) + self.assertNotAlmostEqual(1.1, 1.0, delta=0.05) + self.assertNotAlmostEqual(1.0, 1.1, delta=0.05) + + self.assertRaises(self.failureException, self.assertAlmostEqual, + 1.1, 1.0, delta=0.05) + self.assertRaises(self.failureException, self.assertNotAlmostEqual, + 1.1, 1.0, delta=0.5) + + self.assertRaises(TypeError, self.assertAlmostEqual, + 1.1, 1.0, places=2, delta=2) + self.assertRaises(TypeError, self.assertNotAlmostEqual, + 1.1, 1.0, places=2, delta=2) + + first = datetime.datetime.now() + second = first + datetime.timedelta(seconds=10) + self.assertAlmostEqual(first, second, + delta=datetime.timedelta(seconds=20)) + self.assertNotAlmostEqual(first, second, + delta=datetime.timedelta(seconds=5)) def test_assertRaises(self): def _raise(e): @@ -68,6 +92,16 @@ class Test_Assertions(unittest.TestCase): else: self.fail("assertRaises() didn't let exception pass through") + def testAssertNotRegexpMatches(self): + self.assertNotRegexpMatches('Ala ma kota', r'r+') + try: + self.assertNotRegexpMatches('Ala ma kota', r'k.t', 'Message') + except self.failureException as e: + self.assertIn("'kot'", e.args[0]) + self.assertIn('Message', e.args[0]) + else: + self.fail('assertNotRegexpMatches should have failed.') + class TestLongMessage(unittest.TestCase): """Test that the individual asserts honour longMessage. diff --git a/Lib/unittest/test/test_break.py b/Lib/unittest/test/test_break.py index a1a1eda..e3fae34 100644 --- a/Lib/unittest/test/test_break.py +++ b/Lib/unittest/test/test_break.py @@ -203,8 +203,9 @@ class TestBreak(unittest.TestCase): p = Program(False) p.runTests() - self.assertEqual(FakeRunner.initArgs, [((), {'verbosity': verbosity, - 'failfast': failfast})]) + self.assertEqual(FakeRunner.initArgs, [((), {'buffer': None, + 'verbosity': verbosity, + 'failfast': failfast})]) self.assertEqual(FakeRunner.runArgs, [test]) self.assertEqual(p.result, result) @@ -215,8 +216,9 @@ class TestBreak(unittest.TestCase): p = Program(True) p.runTests() - self.assertEqual(FakeRunner.initArgs, [((), {'verbosity': verbosity, - 'failfast': failfast})]) + self.assertEqual(FakeRunner.initArgs, [((), {'buffer': None, + 'verbosity': verbosity, + 'failfast': failfast})]) self.assertEqual(FakeRunner.runArgs, [test]) self.assertEqual(p.result, result) diff --git a/Lib/unittest/test/test_discovery.py b/Lib/unittest/test/test_discovery.py index 5986271..1b0f08b 100644 --- a/Lib/unittest/test/test_discovery.py +++ b/Lib/unittest/test/test_discovery.py @@ -128,6 +128,7 @@ class TestDiscovery(unittest.TestCase): loader = unittest.TestLoader() original_isfile = os.path.isfile + original_isdir = os.path.isdir def restore_isfile(): os.path.isfile = original_isfile @@ -147,6 +148,12 @@ class TestDiscovery(unittest.TestCase): self.assertIn(full_path, sys.path) os.path.isfile = lambda path: True + os.path.isdir = lambda path: True + + def restore_isdir(): + os.path.isdir = original_isdir + self.addCleanup(restore_isdir) + _find_tests_args = [] def _find_tests(start_dir, pattern): _find_tests_args.append((start_dir, pattern)) @@ -156,8 +163,8 @@ class TestDiscovery(unittest.TestCase): suite = loader.discover('/foo/bar/baz', 'pattern', '/foo/bar') - top_level_dir = os.path.abspath(os.path.normpath('/foo/bar')) - start_dir = os.path.abspath(os.path.normpath('/foo/bar/baz')) + top_level_dir = os.path.abspath('/foo/bar') + start_dir = os.path.abspath('/foo/bar/baz') self.assertEqual(suite, "['tests']") self.assertEqual(loader._top_level_dir, top_level_dir) self.assertEqual(_find_tests_args, [(start_dir, 'pattern')]) diff --git a/Lib/unittest/test/test_loader.py b/Lib/unittest/test/test_loader.py index 373ace9..7def474 100644 --- a/Lib/unittest/test/test_loader.py +++ b/Lib/unittest/test/test_loader.py @@ -524,12 +524,8 @@ class Test_TestLoader(unittest.TestCase): # We're going to try to load this module as a side-effect, so it # better not be loaded before we try. # - # Why pick audioop? Google shows it isn't used very often, so there's - # a good chance that it won't be imported when this test is run - module_name = 'audioop' - - if module_name in sys.modules: - del sys.modules[module_name] + module_name = 'unittest.test.dummy' + sys.modules.pop(module_name, None) loader = unittest.TestLoader() try: @@ -538,7 +534,7 @@ class Test_TestLoader(unittest.TestCase): self.assertIsInstance(suite, loader.suiteClass) self.assertEqual(list(suite), []) - # audioop should now be loaded, thanks to loadTestsFromName() + # module should now be loaded, thanks to loadTestsFromName() self.assertIn(module_name, sys.modules) finally: if module_name in sys.modules: @@ -911,12 +907,8 @@ class Test_TestLoader(unittest.TestCase): # We're going to try to load this module as a side-effect, so it # better not be loaded before we try. # - # Why pick audioop? Google shows it isn't used very often, so there's - # a good chance that it won't be imported when this test is run - module_name = 'audioop' - - if module_name in sys.modules: - del sys.modules[module_name] + module_name = 'unittest.test.dummy' + sys.modules.pop(module_name, None) loader = unittest.TestLoader() try: @@ -925,7 +917,7 @@ class Test_TestLoader(unittest.TestCase): self.assertIsInstance(suite, loader.suiteClass) self.assertEqual(list(suite), [unittest.TestSuite()]) - # audioop should now be loaded, thanks to loadTestsFromName() + # module should now be loaded, thanks to loadTestsFromName() self.assertIn(module_name, sys.modules) finally: if module_name in sys.modules: diff --git a/Lib/unittest/test/test_result.py b/Lib/unittest/test/test_result.py index 967b662..c703032 100644 --- a/Lib/unittest/test/test_result.py +++ b/Lib/unittest/test/test_result.py @@ -1,6 +1,6 @@ import io import sys -import warnings +import textwrap from test import support @@ -25,6 +25,8 @@ class Test_TestResult(unittest.TestCase): self.assertEqual(len(result.failures), 0) self.assertEqual(result.testsRun, 0) self.assertEqual(result.shouldStop, False) + self.assertIsNone(result._stdout_buffer) + self.assertIsNone(result._stderr_buffer) # "This method can be called to signal that the set of tests being # run should be aborted by setting the TestResult's shouldStop @@ -302,6 +304,8 @@ def __init__(self, stream=None, descriptions=None, verbosity=None): self.errors = [] self.testsRun = 0 self.shouldStop = False + self.buffer = False + classDict['__init__'] = __init__ OldResult = type('OldResult', (object,), classDict) @@ -355,3 +359,129 @@ class Test_OldTestResult(unittest.TestCase): # This will raise an exception if TextTestRunner can't handle old # test result objects runner.run(Test('testFoo')) + + +class TestOutputBuffering(unittest.TestCase): + + def setUp(self): + self._real_out = sys.stdout + self._real_err = sys.stderr + + def tearDown(self): + sys.stdout = self._real_out + sys.stderr = self._real_err + + def testBufferOutputOff(self): + real_out = self._real_out + real_err = self._real_err + + result = unittest.TestResult() + self.assertFalse(result.buffer) + + self.assertIs(real_out, sys.stdout) + self.assertIs(real_err, sys.stderr) + + result.startTest(self) + + self.assertIs(real_out, sys.stdout) + self.assertIs(real_err, sys.stderr) + + def testBufferOutputStartTestAddSuccess(self): + real_out = self._real_out + real_err = self._real_err + + result = unittest.TestResult() + self.assertFalse(result.buffer) + + result.buffer = True + + self.assertIs(real_out, sys.stdout) + self.assertIs(real_err, sys.stderr) + + result.startTest(self) + + self.assertIsNot(real_out, sys.stdout) + self.assertIsNot(real_err, sys.stderr) + self.assertIsInstance(sys.stdout, io.StringIO) + self.assertIsInstance(sys.stderr, io.StringIO) + self.assertIsNot(sys.stdout, sys.stderr) + + out_stream = sys.stdout + err_stream = sys.stderr + + result._original_stdout = io.StringIO() + result._original_stderr = io.StringIO() + + print('foo') + print('bar', file=sys.stderr) + + self.assertEqual(out_stream.getvalue(), 'foo\n') + self.assertEqual(err_stream.getvalue(), 'bar\n') + + self.assertEqual(result._original_stdout.getvalue(), '') + self.assertEqual(result._original_stderr.getvalue(), '') + + result.addSuccess(self) + result.stopTest(self) + + self.assertIs(sys.stdout, result._original_stdout) + self.assertIs(sys.stderr, result._original_stderr) + + self.assertEqual(result._original_stdout.getvalue(), '') + self.assertEqual(result._original_stderr.getvalue(), '') + + self.assertEqual(out_stream.getvalue(), '') + self.assertEqual(err_stream.getvalue(), '') + + + def getStartedResult(self): + result = unittest.TestResult() + result.buffer = True + result.startTest(self) + return result + + def testBufferOutputAddErrorOrFailure(self): + for message_attr, add_attr, include_error in [ + ('errors', 'addError', True), + ('failures', 'addFailure', False), + ('errors', 'addError', True), + ('failures', 'addFailure', False) + ]: + result = self.getStartedResult() + buffered_out = sys.stdout + buffered_err = sys.stderr + result._original_stdout = io.StringIO() + result._original_stderr = io.StringIO() + + print('foo', file=sys.stdout) + if include_error: + print('bar', file=sys.stderr) + + + addFunction = getattr(result, add_attr) + addFunction(self, (None, None, None)) + result.stopTest(self) + + result_list = getattr(result, message_attr) + self.assertEqual(len(result_list), 1) + + test, message = result_list[0] + expectedOutMessage = textwrap.dedent(""" + Stdout: + foo + """) + expectedErrMessage = '' + if include_error: + expectedErrMessage = textwrap.dedent(""" + Stderr: + bar + """) + expectedFullMessage = 'NoneType\n%s%s' % (expectedOutMessage, expectedErrMessage) + + self.assertIs(test, self) + self.assertEqual(result._original_stdout.getvalue(), expectedOutMessage) + self.assertEqual(result._original_stderr.getvalue(), expectedErrMessage) + self.assertMultiLineEqual(message, expectedFullMessage) + +if __name__ == '__main__': + unittest.main() -- cgit v0.12