.. highlightlang:: c .. _initialization: ***************************************** Initialization, Finalization, and Threads ***************************************** .. cfunction:: void Py_Initialize() .. index:: single: Py_SetProgramName() single: PyEval_InitThreads() single: PyEval_ReleaseLock() single: PyEval_AcquireLock() single: modules (in module sys) single: path (in module sys) module: builtins module: __main__ module: sys triple: module; search; path single: PySys_SetArgv() single: PySys_SetArgvEx() single: Py_Finalize() Initialize the Python interpreter. In an application embedding Python, this should be called before using any other Python/C API functions; with the exception of :cfunc:`Py_SetProgramName`, :cfunc:`PyEval_InitThreads`, :cfunc:`PyEval_ReleaseLock`, and :cfunc:`PyEval_AcquireLock`. This initializes the table of loaded modules (``sys.modules``), and creates the fundamental modules :mod:`builtins`, :mod:`__main__` and :mod:`sys`. It also initializes the module search path (``sys.path``). It does not set ``sys.argv``; use :cfunc:`PySys_SetArgvEx` for that. This is a no-op when called for a second time (without calling :cfunc:`Py_Finalize` first). There is no return value; it is a fatal error if the initialization fails. .. cfunction:: void Py_InitializeEx(int initsigs) This function works like :cfunc:`Py_Initialize` if *initsigs* is 1. If *initsigs* is 0, it skips initialization registration of signal handlers, which might be useful when Python is embedded. .. cfunction:: int Py_IsInitialized() Return true (nonzero) when the Python interpreter has been initialized, false (zero) if not. After :cfunc:`Py_Finalize` is called, this returns false until :cfunc:`Py_Initialize` is called again. .. cfunction:: void Py_Finalize() Undo all initializations made by :cfunc:`Py_Initialize` and subsequent use of Python/C API functions, and destroy all sub-interpreters (see :cfunc:`Py_NewInterpreter` below) that were created and not yet destroyed since the last call to :cfunc:`Py_Initialize`. Ideally, this frees all memory allocated by the Python interpreter. This is a no-op when called for a second time (without calling :cfunc:`Py_Initialize` again first). There is no return value; errors during finalization are ignored. This function is provided for a number of reasons. An embedding application might want to restart Python without having to restart the application itself. An application that has loaded the Python interpreter from a dynamically loadable library (or DLL) might want to free all memory allocated by Python before unloading the DLL. During a hunt for memory leaks in an application a developer might want to free all memory allocated by Python before exiting from the application. **Bugs and caveats:** The destruction of modules and objects in modules is done in random order; this may cause destructors (:meth:`__del__` methods) to fail when they depend on other objects (even functions) or modules. Dynamically loaded extension modules loaded by Python are not unloaded. Small amounts of memory allocated by the Python interpreter may not be freed (if you find a leak, please report it). Memory tied up in circular references between objects is not freed. Some memory allocated by extension modules may not be freed. Some extensions may not work properly if their initialization routine is called more than once; this can happen if an application calls :cfunc:`Py_Initialize` and :cfunc:`Py_Finalize` more than once. .. cfunction:: PyThreadState* Py_NewInterpreter() .. index:: module: builtins module: __main__ module: sys single: stdout (in module sys) single: stderr (in module sys) single: stdin (in module sys) Create a new sub-interpreter. This is an (almost) totally separate environment for the execution of Python code. In particular, the new interpreter has separate, independent versions of all imported modules, including the fundamental modules :mod:`builtins`, :mod:`__main__` and :mod:`sys`. The table of loaded modules (``sys.modules``) and the module search path (``sys.path``) are also separate. The new environment has no ``sys.argv`` variable. It has new standard I/O stream file objects ``sys.stdin``, ``sys.stdout`` and ``sys.stderr`` (however these refer to the same underlying :ctype:`FILE` structures in the C library). The return value points to the first thread state created in the new sub-interpreter. This thread state is made in the current thread state. Note that no actual thread is created; see the discussion of thread states below. If creation of the new interpreter is unsuccessful, *NULL* is returned; no exception is set since the exception state is stored in the current thread state and there may not be a current thread state. (Like all other Python/C API functions, the global interpreter lock must be held before calling this function and is still held when it returns; however, unlike most other Python/C API functions, there needn't be a current thread state on entry.) .. index:: single: Py_Finalize() single: Py_Initialize() Extension modules are shared between (sub-)interpreters as follows: the first time a particular extension is imported, it is initialized normally, and a (shallow) copy of its module's dictionary is squirreled away. When the same extension is imported by another (sub-)interpreter, a new module is initialized and filled with the contents of this copy; the extension's ``init`` function is not called. Note that this is different from what happens when an extension is imported after the interpreter has been completely re-initialized by calling :cfunc:`Py_Finalize` and :cfunc:`Py_Initialize`; in that case, the extension's ``initmodule`` function *is* called again. .. index:: single: close() (in module os) **Bugs and caveats:** Because sub-interpreters (and the main interpreter) are part of the same process, the insulation between them isn't perfect --- for example, using low-level file operations like :func:`os.close` they can (accidentally or maliciously) affect each other's open files. Because of the way extensions are shared between (sub-)interpreters, some extensions may not work properly; this is especially likely when the extension makes use of (static) global variables, or when the extension manipulates its module's dictionary after its initialization. It is possible to insert objects created in one sub-interpreter into a namespace of another sub-interpreter; this should be done with great care to avoid sharing user-defined functions, methods, instances or classes between sub-interpreters, since import operations executed by such objects may affect the wrong (sub-)interpreter's dictionary of loaded modules. (XXX This is a hard-to-fix bug that will be addressed in a future release.) Also note that the use of this functionality is incompatible with extension modules such as PyObjC and ctypes that use the :cfunc:`PyGILState_\*` APIs (and this is inherent in the way the :cfunc:`PyGILState_\*` functions work). Simple things may work, but confusing behavior will always be near. .. cfunction:: void Py_EndInterpreter(PyThreadState *tstate) .. index:: single: Py_Finalize() Destroy the (sub-)interpreter represented by the given thread state. The given thread state must be the current thread state. See the discussion of thread states below. When the call returns, the current thread state is *NULL*. All thread states associated with this interpreter are destroyed. (The global interpreter lock must be held before calling this function and is still held when it returns.) :cfunc:`Py_Finalize` will destroy all sub-interpreters that haven't been explicitly destroyed at that point. .. cfunction:: void Py_SetProgramName(wchar_t *name) .. index:: single: Py_Initialize() single: main() single: Py_GetPath() This function should be called before :cfunc:`Py_Initialize` is called for the first time, if it is called at all. It tells the interpreter the value of the ``argv[0]`` argument to the :cfunc:`main` function of the program (converted to wide characters). This is used by :cfunc:`Py_GetPath` and some other functions below to find the Python run-time libraries relative to the interpreter executable. The default value is ``'python'``. The argument should point to a zero-terminated wide character string in static storage whose contents will not change for the duration of the program's execution. No code in the Python interpreter will change the contents of this storage. .. cfunction:: wchar* Py_GetProgramName() .. index:: single: Py_SetProgramName() Return the program name set with :cfunc:`Py_SetProgramName`, or the default. The returned string points into static storage; the caller should not modify its value. .. cfunction:: wchar_t* Py_GetPrefix() Return the *prefix* for installed platform-independent files. This is derived through a number of complicated rules from the program name set with :cfunc:`Py_SetProgramName` and some environment variables; for example, if the program name is ``'/usr/local/bin/python'``, the prefix is ``'/usr/local'``. The returned string points into static storage; the caller should not modify its value. This corresponds to the :makevar:`prefix` variable in the top-level :file:`Makefile` and the :option:`--prefix` argument to the :program:`configure` script at build time. The value is available to Python code as ``sys.prefix``. It is only useful on Unix. See also the next function. .. cfunction:: wchar_t* Py_GetExecPrefix() Return the *exec-prefix* for installed platform-*dependent* files. This is derived through a number of complicated rules from the program name set with :cfunc:`Py_SetProgramName` and some environment variables; for example, if the program name is ``'/usr/local/bin/python'``, the exec-prefix is ``'/usr/local'``. The returned string points into static storage; the caller should not modify its value. This corresponds to the :makevar:`exec_prefix` variable in the top-level :file:`Makefile` and the :option:`--exec-prefix` argument to the :program:`configure` script at build time. The value is available to Python code as ``sys.exec_prefix``. It is only useful on Unix. Background: The exec-prefix differs from the prefix when platform dependent files (such as executables and shared libraries) are installed in a different directory tree. In a typical installation, platform dependent files may be installed in the :file:`/usr/local/plat` subtree while platform independent may be installed in :file:`/usr/local`. Generally speaking, a platform is a combination of hardware and software families, e.g. Sparc machines running the Solaris 2.x operating system are considered the same platform, but Intel machines running Solaris 2.x are another platform, and Intel machines running Linux are yet another platform. Different major revisions of the same operating system generally also form different platforms. Non-Unix operating systems are a different story; the installation strategies on those systems are so different that the prefix and exec-prefix are meaningless, and set to the empty string. Note that compiled Python bytecode files are platform independent (but not independent from the Python version by which they were compiled!). System administrators will know how to configure the :program:`mount` or :program:`automount` programs to share :file:`/usr/local` between platforms while having :file:`/usr/local/plat` be a different filesystem for each platform. .. cfunction:: wchar_t* Py_GetProgramFullPath() .. index:: single: Py_SetProgramName() single: executable (in module sys) Return the full program name of the Python executable; this is computed as a side-effect of deriving the default module search path from the program name (set by :cfunc:`Py_SetProgramName` above). The returned string points into static storage; the caller should not modify its value. The value is available to Python code as ``sys.executable``. .. cfunction:: wchar_t* Py_GetPath() .. index:: triple: module; search; path single: path (in module sys) Return the default module search path; this is computed from the program name (set by :cfunc:`Py_SetProgramName` above) and some environment variables. The returned string consists of a series of directory names separated by a platform dependent delimiter character. The delimiter character is ``':'`` on Unix and Mac OS X, ``';'`` on Windows. The returned string points into static storage; the caller should not modify its value. The list :data:`sys.path` is initialized with this value on interpreter startup; it can be (and usually is) modified later to change the search path for loading modules. .. XXX should give the exact rules .. cfunction:: const char* Py_GetVersion() Return the version of this Python interpreter. This is a string that looks something like :: "3.0a5+ (py3k:63103M, May 12 2008, 00:53:55) \n[GCC 4.2.3]" .. index:: single: version (in module sys) The first word (up to the first space character) is the current Python version; the first three characters are the major and minor version separated by a period. The returned string points into static storage; the caller should not modify its value. The value is available to Python code as :data:`sys.version`. .. cfunction:: const char* Py_GetPlatform() .. index:: single: platform (in module sys) Return the platform identifier for the current platform. On Unix, this is formed from the "official" name of the operating system, converted to lower case, followed by the major revision number; e.g., for Solaris 2.x, which is also known as SunOS 5.x, the value is ``'sunos5'``. On Mac OS X, it is ``'darwin'``. On Windows, it is ``'win'``. The returned string points into static storage; the caller should not modify its value. The value is available to Python code as ``sys.platform``. .. cfunction:: const char* Py_GetCopyright() Return the official copyright string for the current Python version, for example ``'Copyright 1991-1995 Stichting Mathematisch Centrum, Amsterdam'`` .. index:: single: copyright (in module sys) The returned string points into static storage; the caller should not modify its value. The value is available to Python code as ``sys.copyright``. .. cfunction:: const char* Py_GetCompiler() Return an indication of the compiler used to build the current Python version, in square brackets, for example:: "[GCC 2.7.2.2]" .. index:: single: version (in module sys) The returned string points into static storage; the caller should not modify its value. The value is available to Python code as part of the variable ``sys.version``. .. cfunction:: const char* Py_GetBuildInfo() Return information about the sequence number and build date and time of the current Python interpreter instance, for example :: "#67, Aug 1 1997, 22:34:28" .. index:: single: version (in module sys) The returned string points into static storage; the caller should not modify its value. The value is available to Python code as part of the variable ``sys.version``. .. cfunction:: void PySys_SetArgvEx(int argc, wchar_t **argv, int updatepath) .. index:: single: main() single: Py_FatalError() single: argv (in module sys) Set :data:`sys.argv` based on *argc* and *argv*. These parameters are similar to those passed to the program's :cfunc:`main` function with the difference that the first entry should refer to the script file to be executed rather than the executable hosting the Python interpreter. If there isn't a script that will be run, the first entry in *argv* can be an empty string. If this function fails to initialize :data:`sys.argv`, a fatal condition is signalled using :cfunc:`Py_FatalError`. If *updatepath* is zero, this is all the function does. If *updatepath* is non-zero, the function also modifies :data:`sys.path` according to the following algorithm: - If the name of an existing script is passed in ``argv[0]``, the absolute path of the directory where the script is located is prepended to :data:`sys.path`. - Otherwise (that is, if *argc* is 0 or ``argv[0]`` doesn't point to an existing file name), an empty string is prepended to :data:`sys.path`, which is the same as prepending the current working directory (``"."``). .. note:: It is recommended that applications embedding the Python interpreter for purposes other than executing a single script pass 0 as *updatepath*, and update :data:`sys.path` themselves if desired. See `CVE-2008-5983 `_. On versions before 3.1.3, you can achieve the same effect by manually popping the first :data:`sys.path` element after having called :cfunc:`PySys_SetArgv`, for example using:: PyRun_SimpleString("import sys; sys.path.pop(0)\n"); .. versionadded:: 3.1.3 .. XXX impl. doesn't seem consistent in allowing 0/NULL for the params; check w/ Guido. .. cfunction:: void PySys_SetArgv(int argc, wchar_t **argv) This function works like :cfunc:`PySys_SetArgvEx` with *updatepath* set to 1. .. cfunction:: void Py_SetPythonHome(wchar_t *home) Set the default "home" directory, that is, the location of the standard Python libraries. The libraries are searched in :file:`{home}/lib/python{version}` and :file:`{home}/lib/python{version}`. The argument should point to a zero-terminated character string in static storage whose contents will not change for the duration of the program's execution. No code in the Python interpreter will change the contents of this storage. .. cfunction:: w_char* Py_GetPythonHome() Return the default "home", that is, the value set by a previous call to :cfunc:`Py_SetPythonHome`, or the value of the :envvar:`PYTHONHOME` environment variable if it is set. .. _threads: Thread State and the Global Interpreter Lock ============================================ .. index:: single: global interpreter lock single: interpreter lock single: lock, interpreter The Python interpreter is not fully thread safe. In order to support multi-threaded Python programs, there's a global lock, called the :dfn:`global interpreter lock` or :dfn:`GIL`, that must be held by the current thread before it can safely access Python objects. Without the lock, even the simplest operations could cause problems in a multi-threaded program: for example, when two threads simultaneously increment the reference count of the same object, the reference count could end up being incremented only once instead of twice. .. index:: single: setcheckinterval() (in module sys) Therefore, the rule exists that only the thread that has acquired the global interpreter lock may operate on Python objects or call Python/C API functions. In order to support multi-threaded Python programs, the interpreter regularly releases and reacquires the lock --- by default, every 100 bytecode instructions (this can be changed with :func:`sys.setcheckinterval`). The lock is also released and reacquired around potentially blocking I/O operations like reading or writing a file, so that other threads can run while the thread that requests the I/O is waiting for the I/O operation to complete. .. index:: single: PyThreadState single: PyThreadState The Python interpreter needs to keep some bookkeeping information separate per thread --- for this it uses a data structure called :ctype:`PyThreadState`. There's one global variable, however: the pointer to the current :ctype:`PyThreadState` structure. Before the addition of :dfn:`thread-local storage` (:dfn:`TLS`) the current thread state had to be manipulated explicitly. This is easy enough in most cases. Most code manipulating the global interpreter lock has the following simple structure:: Save the thread state in a local variable. Release the global interpreter lock. ...Do some blocking I/O operation... Reacquire the global interpreter lock. Restore the thread state from the local variable. This is so common that a pair of macros exists to simplify it:: Py_BEGIN_ALLOW_THREADS ...Do some blocking I/O operation... Py_END_ALLOW_THREADS .. index:: single: Py_BEGIN_ALLOW_THREADS single: Py_END_ALLOW_THREADS The :cmacro:`Py_BEGIN_ALLOW_THREADS` macro opens a new block and declares a hidden local variable; the :cmacro:`Py_END_ALLOW_THREADS` macro closes the block. Another advantage of using these two macros is that when Python is compiled without thread support, they are defined empty, thus saving the thread state and GIL manipulations. When thread support is enabled, the block above expands to the following code:: PyThreadState *_save; _save = PyEval_SaveThread(); ...Do some blocking I/O operation... PyEval_RestoreThread(_save); Using even lower level primitives, we can get roughly the same effect as follows:: PyThreadState *_save; _save = PyThreadState_Swap(NULL); PyEval_ReleaseLock(); ...Do some blocking I/O operation... PyEval_AcquireLock(); PyThreadState_Swap(_save); .. index:: single: PyEval_RestoreThread() single: errno single: PyEval_SaveThread() single: PyEval_ReleaseLock() single: PyEval_AcquireLock() There are some subtle differences; in particular, :cfunc:`PyEval_RestoreThread` saves and restores the value of the global variable :cdata:`errno`, since the lock manipulation does not guarantee that :cdata:`errno` is left alone. Also, when thread support is disabled, :cfunc:`PyEval_SaveThread` and :cfunc:`PyEval_RestoreThread` don't manipulate the GIL; in this case, :cfunc:`PyEval_ReleaseLock` and :cfunc:`PyEval_AcquireLock` are not available. This is done so that dynamically loaded extensions compiled with thread support enabled can be loaded by an interpreter that was compiled with disabled thread support. The global interpreter lock is used to protect the pointer to the current thread state. When releasing the lock and saving the thread state, the current thread state pointer must be retrieved before the lock is released (since another thread could immediately acquire the lock and store its own thread state in the global variable). Conversely, when acquiring the lock and restoring the thread state, the lock must be acquired before storing the thread state pointer. It is important to note that when threads are created from C, they don't have the global interpreter lock, nor is there a thread state data structure for them. Such threads must bootstrap themselves into existence, by first creating a thread state data structure, then acquiring the lock, and finally storing their thread state pointer, before they can start using the Python/C API. When they are done, they should reset the thread state pointer, release the lock, and finally free their thread state data structure. Threads can take advantage of the :cfunc:`PyGILState_\*` functions to do all of the above automatically. The typical idiom for calling into Python from a C thread is now:: PyGILState_STATE gstate; gstate = PyGILState_Ensure(); /* Perform Python actions here. */ result = CallSomeFunction(); /* evaluate result */ /* Release the thread. No Python API allowed beyond this point. */ PyGILState_Release(gstate); Note that the :cfunc:`PyGILState_\*` functions assume there is only one global interpreter (created automatically by :cfunc:`Py_Initialize`). Python still supports the creation of additional interpreters (using :cfunc:`Py_NewInterpreter`), but mixing multiple interpreters and the :cfunc:`PyGILState_\*` API is unsupported. Another important thing to note about threads is their behaviour in the face of the C :cfunc:`fork` call. On most systems with :cfunc:`fork`, after a process forks only the thread that issued the fork will exist. That also means any locks held by other threads will never be released. Python solves this for :func:`os.fork` by acquiring the locks it uses internally before the fork, and releasing them afterwards. In addition, it resets any :ref:`lock-objects` in the child. When extending or embedding Python, there is no way to inform Python of additional (non-Python) locks that need to be acquired before or reset after a fork. OS facilities such as :cfunc:`posix_atfork` would need to be used to accomplish the same thing. Additionally, when extending or embedding Python, calling :cfunc:`fork` directly rather than through :func:`os.fork` (and returning to or calling into Python) may result in a deadlock by one of Python's internal locks being held by a thread that is defunct after the fork. :cfunc:`PyOS_AfterFork` tries to reset the necessary locks, but is not always able to. .. ctype:: PyInterpreterState This data structure represents the state shared by a number of cooperating threads. Threads belonging to the same interpreter share their module administration and a few other internal items. There are no public members in this structure. Threads belonging to different interpreters initially share nothing, except process state like available memory, open file descriptors and such. The global interpreter lock is also shared by all threads, regardless of to which interpreter they belong. .. ctype:: PyThreadState This data structure represents the state of a single thread. The only public data member is :ctype:`PyInterpreterState \*`:attr:`interp`, which points to this thread's interpreter state. .. cfunction:: void PyEval_InitThreads() .. index:: single: PyEval_ReleaseLock() single: PyEval_ReleaseThread() single: PyEval_SaveThread() single: PyEval_RestoreThread() Initialize and acquire the global interpreter lock. It should be called in the main thread before creating a second thread or engaging in any other thread operations such as :cfunc:`PyEval_ReleaseLock` or ``PyEval_ReleaseThread(tstate)``. It is not needed before calling :cfunc:`PyEval_SaveThread` or :cfunc:`PyEval_RestoreThread`. .. index:: single: Py_Initialize() This is a no-op when called for a second time. It is safe to call this function before calling :cfunc:`Py_Initialize`. .. index:: module: _thread When only the main thread exists, no GIL operations are needed. This is a common situation (most Python programs do not use threads), and the lock operations slow the interpreter down a bit. Therefore, the lock is not created initially. This situation is equivalent to having acquired the lock: when there is only a single thread, all object accesses are safe. Therefore, when this function initializes the global interpreter lock, it also acquires it. Before the Python :mod:`_thread` module creates a new thread, knowing that either it has the lock or the lock hasn't been created yet, it calls :cfunc:`PyEval_InitThreads`. When this call returns, it is guaranteed that the lock has been created and that the calling thread has acquired it. It is **not** safe to call this function when it is unknown which thread (if any) currently has the global interpreter lock. This function is not available when thread support is disabled at compile time. .. cfunction:: int PyEval_ThreadsInitialized() Returns a non-zero value if :cfunc:`PyEval_InitThreads` has been called. This function can be called without holding the GIL, and therefore can be used to avoid calls to the locking API when running single-threaded. This function is not available when thread support is disabled at compile time. .. cfunction:: void PyEval_AcquireLock() Acquire the global interpreter lock. The lock must have been created earlier. If this thread already has the lock, a deadlock ensues. This function is not available when thread support is disabled at compile time. .. cfunction:: void PyEval_ReleaseLock() Release the global interpreter lock. The lock must have been created earlier. This function is not available when thread support is disabled at compile time. .. cfunction:: void PyEval_AcquireThread(PyThreadState *tstate) Acquire the global interpreter lock and set the current thread state to *tstate*, which should not be *NULL*. The lock must have been created earlier. If this thread already has the lock, deadlock ensues. This function is not available when thread support is disabled at compile time. .. cfunction:: void PyEval_ReleaseThread(PyThreadState *tstate) Reset the current thread state to *NULL* and release the global interpreter lock. The lock must have been created earlier and must be held by the current thread. The *tstate* argument, which must not be *NULL*, is only used to check that it represents the current thread state --- if it isn't, a fatal error is reported. This function is not available when thread support is disabled at compile time. .. cfunction:: PyThreadState* PyEval_SaveThread() Release the global interpreter lock (if it has been created and thread support is enabled) and reset the thread state to *NULL*, returning the previous thread state (which is not *NULL*). If the lock has been created, the current thread must have acquired it. (This function is available even when thread support is disabled at compile time.) .. cfunction:: void PyEval_RestoreThread(PyThreadState *tstate) Acquire the global interpreter lock (if it has been created and thread support is enabled) and set the thread state to *tstate*, which must not be *NULL*. If the lock has been created, the current thread must not have acquired it, otherwise deadlock ensues. (This function is available even when thread support is disabled at compile time.) .. cfunction:: void PyEval_ReInitThreads() This function is called from :cfunc:`PyOS_AfterFork` to ensure that newly created child processes don't hold locks referring to threads which are not running in the child process. The following macros are normally used without a trailing semicolon; look for example usage in the Python source distribution. .. cmacro:: Py_BEGIN_ALLOW_THREADS This macro expands to ``{ PyThreadState *_save; _save = PyEval_SaveThread();``. Note that it contains an opening brace; it must be matched with a following :cmacro:`Py_END_ALLOW_THREADS` macro. See above for further discussion of this macro. It is a no-op when thread support is disabled at compile time. .. cmacro:: Py_END_ALLOW_THREADS This macro expands to ``PyEval_RestoreThread(_save); }``. Note that it contains a closing brace; it must be matched with an earlier :cmacro:`Py_BEGIN_ALLOW_THREADS` macro. See above for further discussion of this macro. It is a no-op when thread support is disabled at compile time. .. cmacro:: Py_BLOCK_THREADS This macro expands to ``PyEval_RestoreThread(_save);``: it is equivalent to :cmacro:`Py_END_ALLOW_THREADS` without the closing brace. It is a no-op when thread support is disabled at compile time. .. cmacro:: Py_UNBLOCK_THREADS This macro expands to ``_save = PyEval_SaveThread();``: it is equivalent to :cmacro:`Py_BEGIN_ALLOW_THREADS` without the opening brace and variable declaration. It is a no-op when thread support is disabled at compile time. All of the following functions are only available when thread support is enabled at compile time, and must be called only when the global interpreter lock has been created. .. cfunction:: PyInterpreterState* PyInterpreterState_New() Create a new interpreter state object. The global interpreter lock need not be held, but may be held if it is necessary to serialize calls to this function. .. cfunction:: void PyInterpreterState_Clear(PyInterpreterState *interp) Reset all information in an interpreter state object. The global interpreter lock must be held. .. cfunction:: void PyInterpreterState_Delete(PyInterpreterState *interp) Destroy an interpreter state object. The global interpreter lock need not be held. The interpreter state must have been reset with a previous call to :cfunc:`PyInterpreterState_Clear`. .. cfunction:: PyThreadState* PyThreadState_New(PyInterpreterState *interp) Create a new thread state object belonging to the given interpreter object. The global interpreter lock need not be held, but may be held if it is necessary to serialize calls to this function. .. cfunction:: void PyThreadState_Clear(PyThreadState *tstate) Reset all information in a thread state object. The global interpreter lock must be held. .. cfunction:: void PyThreadState_Delete(PyThreadState *tstate) Destroy a thread state object. The global interpreter lock need not be held. The thread state must have been reset with a previous call to :cfunc:`PyThreadState_Clear`. .. cfunction:: PyThreadState* PyThreadState_Get() Return the current thread state. The global interpreter lock must be held. When the current thread state is *NULL*, this issues a fatal error (so that the caller needn't check for *NULL*). .. cfunction:: PyThreadState* PyThreadState_Swap(PyThreadState *tstate) Swap the current thread state with the thread state given by the argument *tstate*, which may be *NULL*. The global interpreter lock must be held. .. cfunction:: PyObject* PyThreadState_GetDict() Return a dictionary in which extensions can store thread-specific state information. Each extension should use a unique key to use to store state in the dictionary. It is okay to call this function when no current thread state is available. If this function returns *NULL*, no exception has been raised and the caller should assume no current thread state is available. .. cfunction:: int PyThreadState_SetAsyncExc(long id, PyObject *exc) Asynchronously raise an exception in a thread. The *id* argument is the thread id of the target thread; *exc* is the exception object to be raised. This function does not steal any references to *exc*. To prevent naive misuse, you must write your own C extension to call this. Must be called with the GIL held. Returns the number of thread states modified; this is normally one, but will be zero if the thread id isn't found. If *exc* is :const:`NULL`, the pending exception (if any) for the thread is cleared. This raises no exceptions. .. cfunction:: PyGILState_STATE PyGILState_Ensure() Ensure that the current thread is ready to call the Python C API regardless of the current state of Python, or of the global interpreter lock. This may be called as many times as desired by a thread as long as each call is matched with a call to :cfunc:`PyGILState_Release`. In general, other thread-related APIs may be used between :cfunc:`PyGILState_Ensure` and :cfunc:`PyGILState_Release` calls as long as the thread state is restored to its previous state before the Release(). For example, normal usage of the :cmacro:`Py_BEGIN_ALLOW_THREADS` and :cmacro:`Py_END_ALLOW_THREADS` macros is acceptable. The return value is an opaque "handle" to the thread state when :cfunc:`PyGILState_Ensure` was called, and must be passed to :cfunc:`PyGILState_Release` to ensure Python is left in the same state. Even though recursive calls are allowed, these handles *cannot* be shared - each unique call to :cfunc:`PyGILState_Ensure` must save the handle for its call to :cfunc:`PyGILState_Release`. When the function returns, the current thread will hold the GIL. Failure is a fatal error. .. cfunction:: void PyGILState_Release(PyGILState_STATE) Release any resources previously acquired. After this call, Python's state will be the same as it was prior to the corresponding :cfunc:`PyGILState_Ensure` call (but generally this state will be unknown to the caller, hence the use of the GILState API.) Every call to :cfunc:`PyGILState_Ensure` must be matched by a call to :cfunc:`PyGILState_Release` on the same thread. Asynchronous Notifications ========================== A mechanism is provided to make asynchronous notifications to the main interpreter thread. These notifications take the form of a function pointer and a void argument. .. index:: single: setcheckinterval() (in module sys) Every check interval, when the global interpreter lock is released and reacquired, Python will also call any such provided functions. This can be used for example by asynchronous IO handlers. The notification can be scheduled from a worker thread and the actual call than made at the earliest convenience by the main thread where it has possession of the global interpreter lock and can perform any Python API calls. .. cfunction:: void Py_AddPendingCall( int (*func)(void *, void *arg) ) .. index:: single: Py_AddPendingCall() Post a notification to the Python main thread. If successful, *func* will be called with the argument *arg* at the earliest convenience. *func* will be called having the global interpreter lock held and can thus use the full Python API and can take any action such as setting object attributes to signal IO completion. It must return 0 on success, or -1 signalling an exception. The notification function won't be interrupted to perform another asynchronous notification recursively, but it can still be interrupted to switch threads if the global interpreter lock is released, for example, if it calls back into Python code. This function returns 0 on success in which case the notification has been scheduled. Otherwise, for example if the notification buffer is full, it returns -1 without setting any exception. This function can be called on any thread, be it a Python thread or some other system thread. If it is a Python thread, it doesn't matter if it holds the global interpreter lock or not. .. versionadded:: 3.1 .. _profiling: Profiling and Tracing ===================== .. sectionauthor:: Fred L. Drake, Jr. The Python interpreter provides some low-level support for attaching profiling and execution tracing facilities. These are used for profiling, debugging, and coverage analysis tools. This C interface allows the profiling or tracing code to avoid the overhead of calling through Python-level callable objects, making a direct C function call instead. The essential attributes of the facility have not changed; the interface allows trace functions to be installed per-thread, and the basic events reported to the trace function are the same as had been reported to the Python-level trace functions in previous versions. .. ctype:: int (*Py_tracefunc)(PyObject *obj, PyFrameObject *frame, int what, PyObject *arg) The type of the trace function registered using :cfunc:`PyEval_SetProfile` and :cfunc:`PyEval_SetTrace`. The first parameter is the object passed to the registration function as *obj*, *frame* is the frame object to which the event pertains, *what* is one of the constants :const:`PyTrace_CALL`, :const:`PyTrace_EXCEPTION`, :const:`PyTrace_LINE`, :const:`PyTrace_RETURN`, :const:`PyTrace_C_CALL`, :const:`PyTrace_C_EXCEPTION`, or :const:`PyTrace_C_RETURN`, and *arg* depends on the value of *what*: +------------------------------+--------------------------------------+ | Value of *what* | Meaning of *arg* | +==============================+======================================+ | :const:`PyTrace_CALL` | Always *NULL*. | +------------------------------+--------------------------------------+ | :const:`PyTrace_EXCEPTION` | Exception information as returned by | | | :func:`sys.exc_info`. | +------------------------------+--------------------------------------+ | :const:`PyTrace_LINE` | Always *NULL*. | +------------------------------+--------------------------------------+ | :const:`PyTrace_RETURN` | Value being returned to the caller. | +------------------------------+--------------------------------------+ | :const:`PyTrace_C_CALL` | Name of function being called. | +------------------------------+--------------------------------------+ | :const:`PyTrace_C_EXCEPTION` | Always *NULL*. | +------------------------------+--------------------------------------+ | :const:`PyTrace_C_RETURN` | Always *NULL*. | +------------------------------+--------------------------------------+ .. cvar:: int PyTrace_CALL The value of the *what* parameter to a :ctype:`Py_tracefunc` function when a new call to a function or method is being reported, or a new entry into a generator. Note that the creation of the iterator for a generator function is not reported as there is no control transfer to the Python bytecode in the corresponding frame. .. cvar:: int PyTrace_EXCEPTION The value of the *what* parameter to a :ctype:`Py_tracefunc` function when an exception has been raised. The callback function is called with this value for *what* when after any bytecode is processed after which the exception becomes set within the frame being executed. The effect of this is that as exception propagation causes the Python stack to unwind, the callback is called upon return to each frame as the exception propagates. Only trace functions receives these events; they are not needed by the profiler. .. cvar:: int PyTrace_LINE The value passed as the *what* parameter to a trace function (but not a profiling function) when a line-number event is being reported. .. cvar:: int PyTrace_RETURN The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a call is returning without propagating an exception. .. cvar:: int PyTrace_C_CALL The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C function is about to be called. .. cvar:: int PyTrace_C_EXCEPTION The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C function has thrown an exception. .. cvar:: int PyTrace_C_RETURN The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C function has returned. .. cfunction:: void PyEval_SetProfile(Py_tracefunc func, PyObject *obj) Set the profiler function to *func*. The *obj* parameter is passed to the function as its first parameter, and may be any Python object, or *NULL*. If the profile function needs to maintain state, using a different value for *obj* for each thread provides a convenient and thread-safe place to store it. The profile function is called for all monitored events except the line-number events. .. cfunction:: void PyEval_SetTrace(Py_tracefunc func, PyObject *obj) Set the tracing function to *func*. This is similar to :cfunc:`PyEval_SetProfile`, except the tracing function does receive line-number events. .. cfunction:: PyObject* PyEval_GetCallStats(PyObject *self) Return a tuple of function call counts. There are constants defined for the positions within the tuple: +-------------------------------+-------+ | Name | Value | +===============================+=======+ | :const:`PCALL_ALL` | 0 | +-------------------------------+-------+ | :const:`PCALL_FUNCTION` | 1 | +-------------------------------+-------+ | :const:`PCALL_FAST_FUNCTION` | 2 | +-------------------------------+-------+ | :const:`PCALL_FASTER_FUNCTION`| 3 | +-------------------------------+-------+ | :const:`PCALL_METHOD` | 4 | +-------------------------------+-------+ | :const:`PCALL_BOUND_METHOD` | 5 | +-------------------------------+-------+ | :const:`PCALL_CFUNCTION` | 6 | +-------------------------------+-------+ | :const:`PCALL_TYPE` | 7 | +-------------------------------+-------+ | :const:`PCALL_GENERATOR` | 8 | +-------------------------------+-------+ | :const:`PCALL_OTHER` | 9 | +-------------------------------+-------+ | :const:`PCALL_POP` | 10 | +-------------------------------+-------+ :const:`PCALL_FAST_FUNCTION` means no argument tuple needs to be created. :const:`PCALL_FASTER_FUNCTION` means that the fast-path frame setup code is used. If there is a method call where the call can be optimized by changing the argument tuple and calling the function directly, it gets recorded twice. This function is only present if Python is compiled with :const:`CALL_PROFILE` defined. .. _advanced-debugging: Advanced Debugger Support ========================= .. sectionauthor:: Fred L. Drake, Jr. These functions are only intended to be used by advanced debugging tools. .. cfunction:: PyInterpreterState* PyInterpreterState_Head() Return the interpreter state object at the head of the list of all such objects. .. cfunction:: PyInterpreterState* PyInterpreterState_Next(PyInterpreterState *interp) Return the next interpreter state object after *interp* from the list of all such objects. .. cfunction:: PyThreadState * PyInterpreterState_ThreadHead(PyInterpreterState *interp) Return the a pointer to the first :ctype:`PyThreadState` object in the list of threads associated with the interpreter *interp*. .. cfunction:: PyThreadState* PyThreadState_Next(PyThreadState *tstate) Return the next thread state object after *tstate* from the list of all such objects belonging to the same :ctype:`PyInterpreterState` object.