:mod:`bz2` --- Support for :program:`bzip2` compression ======================================================= .. module:: bz2 :synopsis: Interfaces for bzip2 compression and decompression. .. moduleauthor:: Gustavo Niemeyer .. moduleauthor:: Nadeem Vawda .. sectionauthor:: Gustavo Niemeyer .. sectionauthor:: Nadeem Vawda **Source code:** :source:`Lib/bz2.py` -------------- This module provides a comprehensive interface for compressing and decompressing data using the bzip2 compression algorithm. The :mod:`bz2` module contains: * The :func:`.open` function and :class:`BZ2File` class for reading and writing compressed files. * The :class:`BZ2Compressor` and :class:`BZ2Decompressor` classes for incremental (de)compression. * The :func:`compress` and :func:`decompress` functions for one-shot (de)compression. (De)compression of files ------------------------ .. function:: open(filename, mode='rb', compresslevel=9, encoding=None, errors=None, newline=None) Open a bzip2-compressed file in binary or text mode, returning a :term:`file object`. As with the constructor for :class:`BZ2File`, the *filename* argument can be an actual filename (a :class:`str` or :class:`bytes` object), or an existing file object to read from or write to. The *mode* argument can be any of ``'r'``, ``'rb'``, ``'w'``, ``'wb'``, ``'x'``, ``'xb'``, ``'a'`` or ``'ab'`` for binary mode, or ``'rt'``, ``'wt'``, ``'xt'``, or ``'at'`` for text mode. The default is ``'rb'``. The *compresslevel* argument is an integer from 1 to 9, as for the :class:`BZ2File` constructor. For binary mode, this function is equivalent to the :class:`BZ2File` constructor: ``BZ2File(filename, mode, compresslevel=compresslevel)``. In this case, the *encoding*, *errors* and *newline* arguments must not be provided. For text mode, a :class:`BZ2File` object is created, and wrapped in an :class:`io.TextIOWrapper` instance with the specified encoding, error handling behavior, and line ending(s). .. versionadded:: 3.3 .. versionchanged:: 3.4 The ``'x'`` (exclusive creation) mode was added. .. versionchanged:: 3.6 Accepts a :term:`path-like object`. .. class:: BZ2File(filename, mode='r', *, compresslevel=9) Open a bzip2-compressed file in binary mode. If *filename* is a :class:`str` or :class:`bytes` object, open the named file directly. Otherwise, *filename* should be a :term:`file object`, which will be used to read or write the compressed data. The *mode* argument can be either ``'r'`` for reading (default), ``'w'`` for overwriting, ``'x'`` for exclusive creation, or ``'a'`` for appending. These can equivalently be given as ``'rb'``, ``'wb'``, ``'xb'`` and ``'ab'`` respectively. If *filename* is a file object (rather than an actual file name), a mode of ``'w'`` does not truncate the file, and is instead equivalent to ``'a'``. If *mode* is ``'w'`` or ``'a'``, *compresslevel* can be an integer between ``1`` and ``9`` specifying the level of compression: ``1`` produces the least compression, and ``9`` (default) produces the most compression. If *mode* is ``'r'``, the input file may be the concatenation of multiple compressed streams. :class:`BZ2File` provides all of the members specified by the :class:`io.BufferedIOBase`, except for :meth:`~io.BufferedIOBase.detach` and :meth:`~io.IOBase.truncate`. Iteration and the :keyword:`with` statement are supported. :class:`BZ2File` also provides the following methods: .. method:: peek([n]) Return buffered data without advancing the file position. At least one byte of data will be returned (unless at EOF). The exact number of bytes returned is unspecified. .. note:: While calling :meth:`peek` does not change the file position of the :class:`BZ2File`, it may change the position of the underlying file object (e.g. if the :class:`BZ2File` was constructed by passing a file object for *filename*). .. versionadded:: 3.3 .. method:: fileno() Return the file descriptor for the underlying file. .. versionadded:: 3.3 .. method:: readable() Return whether the file was opened for reading. .. versionadded:: 3.3 .. method:: seekable() Return whether the file supports seeking. .. versionadded:: 3.3 .. method:: writable() Return whether the file was opened for writing. .. versionadded:: 3.3 .. method:: read1(size=-1) Read up to *size* uncompressed bytes, while trying to avoid making multiple reads from the underlying stream. Reads up to a buffer's worth of data if size is negative. Returns ``b''`` if the file is at EOF. .. versionadded:: 3.3 .. method:: readinto(b) Read bytes into *b*. Returns the number of bytes read (0 for EOF). .. versionadded:: 3.3 .. versionchanged:: 3.1 Support for the :keyword:`with` statement was added. .. versionchanged:: 3.3 Support was added for *filename* being a :term:`file object` instead of an actual filename. .. versionchanged:: 3.3 The ``'a'`` (append) mode was added, along with support for reading multi-stream files. .. versionchanged:: 3.4 The ``'x'`` (exclusive creation) mode was added. .. versionchanged:: 3.5 The :meth:`~io.BufferedIOBase.read` method now accepts an argument of ``None``. .. versionchanged:: 3.6 Accepts a :term:`path-like object`. .. versionchanged:: 3.9 The *buffering* parameter has been removed. It was ignored and deprecated since Python 3.0. Pass an open file object to control how the file is opened. The *compresslevel* parameter became keyword-only. .. versionchanged:: 3.10 This class is thread unsafe in the face of multiple simultaneous readers or writers, just like its equivalent classes in :mod:`gzip` and :mod:`lzma` have always been. Incremental (de)compression --------------------------- .. class:: BZ2Compressor(compresslevel=9) Create a new compressor object. This object may be used to compress data incrementally. For one-shot compression, use the :func:`compress` function instead. *compresslevel*, if given, must be an integer between ``1`` and ``9``. The default is ``9``. .. method:: compress(data) Provide data to the compressor object. Returns a chunk of compressed data if possible, or an empty byte string otherwise. When you have finished providing data to the compressor, call the :meth:`flush` method to finish the compression process. .. method:: flush() Finish the compression process. Returns the compressed data left in internal buffers. The compressor object may not be used after this method has been called. .. class:: BZ2Decompressor() Create a new decompressor object. This object may be used to decompress data incrementally. For one-shot compression, use the :func:`decompress` function instead. .. note:: This class does not transparently handle inputs containing multiple compressed streams, unlike :func:`decompress` and :class:`BZ2File`. If you need to decompress a multi-stream input with :class:`BZ2Decompressor`, you must use a new decompressor for each stream. .. method:: decompress(data, max_length=-1) Decompress *data* (a :term:`bytes-like object`), returning uncompressed data as bytes. Some of *data* may be buffered internally, for use in later calls to :meth:`decompress`. The returned data should be concatenated with the output of any previous calls to :meth:`decompress`. If *max_length* is nonnegative, returns at most *max_length* bytes of decompressed data. If this limit is reached and further output can be produced, the :attr:`~.needs_input` attribute will be set to ``False``. In this case, the next call to :meth:`~.decompress` may provide *data* as ``b''`` to obtain more of the output. If all of the input data was decompressed and returned (either because this was less than *max_length* bytes, or because *max_length* was negative), the :attr:`~.needs_input` attribute will be set to ``True``. Attempting to decompress data after the end of stream is reached raises an :exc:`EOFError`. Any data found after the end of the stream is ignored and saved in the :attr:`~.unused_data` attribute. .. versionchanged:: 3.5 Added the *max_length* parameter. .. attribute:: eof ``True`` if the end-of-stream marker has been reached. .. versionadded:: 3.3 .. attribute:: unused_data Data found after the end of the compressed stream. If this attribute is accessed before the end of the stream has been reached, its value will be ``b''``. .. attribute:: needs_input ``False`` if the :meth:`.decompress` method can provide more decompressed data before requiring new uncompressed input. .. versionadded:: 3.5 One-shot (de)compression ------------------------ .. function:: compress(data, compresslevel=9) Compress *data*, a :term:`bytes-like object `. *compresslevel*, if given, must be an integer between ``1`` and ``9``. The default is ``9``. For incremental compression, use a :class:`BZ2Compressor` instead. .. function:: decompress(data) Decompress *data*, a :term:`bytes-like object `. If *data* is the concatenation of multiple compressed streams, decompress all of the streams. For incremental decompression, use a :class:`BZ2Decompressor` instead. .. versionchanged:: 3.3 Support for multi-stream inputs was added. .. _bz2-usage-examples: Examples of usage ----------------- Below are some examples of typical usage of the :mod:`bz2` module. Using :func:`compress` and :func:`decompress` to demonstrate round-trip compression: >>> import bz2 >>> data = b"""\ ... Donec rhoncus quis sapien sit amet molestie. Fusce scelerisque vel augue ... nec ullamcorper. Nam rutrum pretium placerat. Aliquam vel tristique lorem, ... sit amet cursus ante. In interdum laoreet mi, sit amet ultrices purus ... pulvinar a. Nam gravida euismod magna, non varius justo tincidunt feugiat. ... Aliquam pharetra lacus non risus vehicula rutrum. Maecenas aliquam leo ... felis. Pellentesque semper nunc sit amet nibh ullamcorper, ac elementum ... dolor luctus. Curabitur lacinia mi ornare consectetur vestibulum.""" >>> c = bz2.compress(data) >>> len(data) / len(c) # Data compression ratio 1.513595166163142 >>> d = bz2.decompress(c) >>> data == d # Check equality to original object after round-trip True Using :class:`BZ2Compressor` for incremental compression: >>> import bz2 >>> def gen_data(chunks=10, chunksize=1000): ... """Yield incremental blocks of chunksize bytes.""" ... for _ in range(chunks): ... yield b"z" * chunksize ... >>> comp = bz2.BZ2Compressor() >>> out = b"" >>> for chunk in gen_data(): ... # Provide data to the compressor object ... out = out + comp.compress(chunk) ... >>> # Finish the compression process. Call this once you have >>> # finished providing data to the compressor. >>> out = out + comp.flush() The example above uses a very "nonrandom" stream of data (a stream of ``b"z"`` chunks). Random data tends to compress poorly, while ordered, repetitive data usually yields a high compression ratio. Writing and reading a bzip2-compressed file in binary mode: >>> import bz2 >>> data = b"""\ ... Donec rhoncus quis sapien sit amet molestie. Fusce scelerisque vel augue ... nec ullamcorper. Nam rutrum pretium placerat. Aliquam vel tristique lorem, ... sit amet cursus ante. In interdum laoreet mi, sit amet ultrices purus ... pulvinar a. Nam gravida euismod magna, non varius justo tincidunt feugiat. ... Aliquam pharetra lacus non risus vehicula rutrum. Maecenas aliquam leo ... felis. Pellentesque semper nunc sit amet nibh ullamcorper, ac elementum ... dolor luctus. Curabitur lacinia mi ornare consectetur vestibulum.""" >>> with bz2.open("myfile.bz2", "wb") as f: ... # Write compressed data to file ... unused = f.write(data) >>> with bz2.open("myfile.bz2", "rb") as f: ... # Decompress data from file ... content = f.read() >>> content == data # Check equality to original object after round-trip True .. testcleanup:: import os os.remove("myfile.bz2")