/* zlibmodule.c -- gzip-compatible data compression */ /* See http://www.gzip.org/zlib/ */ /* Windows users: read Python's PCbuild\readme.txt */ #define PY_SSIZE_T_CLEAN #include "Python.h" #include "structmember.h" #include "zlib.h" #ifdef WITH_THREAD #include "pythread.h" #define ENTER_ZLIB(obj) \ Py_BEGIN_ALLOW_THREADS; \ PyThread_acquire_lock((obj)->lock, 1); \ Py_END_ALLOW_THREADS; #define LEAVE_ZLIB(obj) PyThread_release_lock((obj)->lock); #else #define ENTER_ZLIB(obj) #define LEAVE_ZLIB(obj) #endif /* The following parameters are copied from zutil.h, version 0.95 */ #define DEFLATED 8 #if MAX_MEM_LEVEL >= 8 # define DEF_MEM_LEVEL 8 #else # define DEF_MEM_LEVEL MAX_MEM_LEVEL #endif /* Initial buffer size. */ #define DEF_BUF_SIZE (16*1024) static PyTypeObject Comptype; static PyTypeObject Decomptype; static PyObject *ZlibError; typedef struct { PyObject_HEAD z_stream zst; PyObject *unused_data; PyObject *unconsumed_tail; char eof; int is_initialised; PyObject *zdict; #ifdef WITH_THREAD PyThread_type_lock lock; #endif } compobject; static void zlib_error(z_stream zst, int err, char *msg) { const char *zmsg = Z_NULL; /* In case of a version mismatch, zst.msg won't be initialized. Check for this case first, before looking at zst.msg. */ if (err == Z_VERSION_ERROR) zmsg = "library version mismatch"; if (zmsg == Z_NULL) zmsg = zst.msg; if (zmsg == Z_NULL) { switch (err) { case Z_BUF_ERROR: zmsg = "incomplete or truncated stream"; break; case Z_STREAM_ERROR: zmsg = "inconsistent stream state"; break; case Z_DATA_ERROR: zmsg = "invalid input data"; break; } } if (zmsg == Z_NULL) PyErr_Format(ZlibError, "Error %d %s", err, msg); else PyErr_Format(ZlibError, "Error %d %s: %.200s", err, msg, zmsg); } /*[clinic input] module zlib class zlib.Compress "compobject *" "&Comptype" class zlib.Decompress "compobject *" "&Decomptype" [clinic start generated code]*/ /*[clinic end generated code: output=da39a3ee5e6b4b0d input=093935115c3e3158]*/ static compobject * newcompobject(PyTypeObject *type) { compobject *self; self = PyObject_New(compobject, type); if (self == NULL) return NULL; self->eof = 0; self->is_initialised = 0; self->zdict = NULL; self->unused_data = PyBytes_FromStringAndSize("", 0); if (self->unused_data == NULL) { Py_DECREF(self); return NULL; } self->unconsumed_tail = PyBytes_FromStringAndSize("", 0); if (self->unconsumed_tail == NULL) { Py_DECREF(self); return NULL; } #ifdef WITH_THREAD self->lock = PyThread_allocate_lock(); if (self->lock == NULL) { PyErr_SetString(PyExc_MemoryError, "Unable to allocate lock"); return NULL; } #endif return self; } static void* PyZlib_Malloc(voidpf ctx, uInt items, uInt size) { if (items > (size_t)PY_SSIZE_T_MAX / size) return NULL; /* PyMem_Malloc() cannot be used: the GIL is not held when inflate() and deflate() are called */ return PyMem_RawMalloc(items * size); } static void PyZlib_Free(voidpf ctx, void *ptr) { PyMem_RawFree(ptr); } /*[clinic input] zlib.compress bytes: Py_buffer Binary data to be compressed. level: int(c_default="Z_DEFAULT_COMPRESSION") = Z_DEFAULT_COMPRESSION Compression level, in 0-9. / Returns a bytes object containing compressed data. [clinic start generated code]*/ static PyObject * zlib_compress_impl(PyModuleDef *module, Py_buffer *bytes, int level) /*[clinic end generated code: output=5d7dd4588788efd3 input=be3abe9934bda4b3]*/ { PyObject *ReturnVal = NULL; Byte *input, *output = NULL; unsigned int length; int err; z_stream zst; if ((size_t)bytes->len > UINT_MAX) { PyErr_SetString(PyExc_OverflowError, "Size does not fit in an unsigned int"); goto error; } input = bytes->buf; length = (unsigned int)bytes->len; zst.avail_out = length + length/1000 + 12 + 1; output = (Byte*)PyMem_Malloc(zst.avail_out); if (output == NULL) { PyErr_SetString(PyExc_MemoryError, "Can't allocate memory to compress data"); goto error; } /* Past the point of no return. From here on out, we need to make sure we clean up mallocs & INCREFs. */ zst.opaque = NULL; zst.zalloc = PyZlib_Malloc; zst.zfree = PyZlib_Free; zst.next_out = (Byte *)output; zst.next_in = (Byte *)input; zst.avail_in = length; err = deflateInit(&zst, level); switch(err) { case(Z_OK): break; case(Z_MEM_ERROR): PyErr_SetString(PyExc_MemoryError, "Out of memory while compressing data"); goto error; case(Z_STREAM_ERROR): PyErr_SetString(ZlibError, "Bad compression level"); goto error; default: deflateEnd(&zst); zlib_error(zst, err, "while compressing data"); goto error; } Py_BEGIN_ALLOW_THREADS; err = deflate(&zst, Z_FINISH); Py_END_ALLOW_THREADS; if (err != Z_STREAM_END) { zlib_error(zst, err, "while compressing data"); deflateEnd(&zst); goto error; } err=deflateEnd(&zst); if (err == Z_OK) ReturnVal = PyBytes_FromStringAndSize((char *)output, zst.total_out); else zlib_error(zst, err, "while finishing compression"); error: PyMem_Free(output); return ReturnVal; } /*[python input] class capped_uint_converter(CConverter): type = 'unsigned int' converter = 'capped_uint_converter' c_ignored_default = "0" [python start generated code]*/ /*[python end generated code: output=da39a3ee5e6b4b0d input=35521e4e733823c7]*/ static int capped_uint_converter(PyObject *obj, void *ptr) { PyObject *long_obj; Py_ssize_t val; long_obj = (PyObject *)_PyLong_FromNbInt(obj); if (long_obj == NULL) { return 0; } val = PyLong_AsSsize_t(long_obj); Py_DECREF(long_obj); if (val == -1 && PyErr_Occurred()) { return 0; } if (val < 0) { PyErr_SetString(PyExc_ValueError, "value must be positive"); return 0; } if ((size_t)val > UINT_MAX) { *(unsigned int *)ptr = UINT_MAX; } else { *(unsigned int *)ptr = Py_SAFE_DOWNCAST(val, Py_ssize_t, unsigned int); } return 1; } /*[clinic input] zlib.decompress data: Py_buffer Compressed data. wbits: int(c_default="MAX_WBITS") = MAX_WBITS The window buffer size. bufsize: capped_uint(c_default="DEF_BUF_SIZE") = DEF_BUF_SIZE The initial output buffer size. / Returns a bytes object containing the uncompressed data. [clinic start generated code]*/ static PyObject * zlib_decompress_impl(PyModuleDef *module, Py_buffer *data, int wbits, unsigned int bufsize) /*[clinic end generated code: output=444d0987f3429574 input=da095118b3243b27]*/ { PyObject *result_str = NULL; Byte *input; unsigned int length; int err; unsigned int new_bufsize; z_stream zst; if ((size_t)data->len > UINT_MAX) { PyErr_SetString(PyExc_OverflowError, "Size does not fit in an unsigned int"); goto error; } input = data->buf; length = (unsigned int)data->len; if (bufsize == 0) bufsize = 1; zst.avail_in = length; zst.avail_out = bufsize; if (!(result_str = PyBytes_FromStringAndSize(NULL, bufsize))) goto error; zst.opaque = NULL; zst.zalloc = PyZlib_Malloc; zst.zfree = PyZlib_Free; zst.next_out = (Byte *)PyBytes_AS_STRING(result_str); zst.next_in = (Byte *)input; err = inflateInit2(&zst, wbits); switch(err) { case(Z_OK): break; case(Z_MEM_ERROR): PyErr_SetString(PyExc_MemoryError, "Out of memory while decompressing data"); goto error; default: inflateEnd(&zst); zlib_error(zst, err, "while preparing to decompress data"); goto error; } do { Py_BEGIN_ALLOW_THREADS err=inflate(&zst, Z_FINISH); Py_END_ALLOW_THREADS switch(err) { case(Z_STREAM_END): break; case(Z_BUF_ERROR): /* * If there is at least 1 byte of room according to zst.avail_out * and we get this error, assume that it means zlib cannot * process the inflate call() due to an error in the data. */ if (zst.avail_out > 0) { zlib_error(zst, err, "while decompressing data"); inflateEnd(&zst); goto error; } /* fall through */ case(Z_OK): /* need more memory */ if (bufsize <= (UINT_MAX >> 1)) new_bufsize = bufsize << 1; else new_bufsize = UINT_MAX; if (_PyBytes_Resize(&result_str, new_bufsize) < 0) { inflateEnd(&zst); goto error; } zst.next_out = (unsigned char *)PyBytes_AS_STRING(result_str) + bufsize; zst.avail_out = bufsize; bufsize = new_bufsize; break; default: inflateEnd(&zst); zlib_error(zst, err, "while decompressing data"); goto error; } } while (err != Z_STREAM_END); err = inflateEnd(&zst); if (err != Z_OK) { zlib_error(zst, err, "while finishing decompression"); goto error; } if (_PyBytes_Resize(&result_str, zst.total_out) < 0) goto error; return result_str; error: Py_XDECREF(result_str); return NULL; } /*[clinic input] zlib.compressobj level: int(c_default="Z_DEFAULT_COMPRESSION") = Z_DEFAULT_COMPRESSION The compression level (an integer in the range 0-9 or -1; default is currently equivalent to 6). Higher compression levels are slower, but produce smaller results. method: int(c_default="DEFLATED") = DEFLATED The compression algorithm. If given, this must be DEFLATED. wbits: int(c_default="MAX_WBITS") = MAX_WBITS The base two logarithm of the window size (range: 8..15). memLevel: int(c_default="DEF_MEM_LEVEL") = DEF_MEM_LEVEL Controls the amount of memory used for internal compression state. Valid values range from 1 to 9. Higher values result in higher memory usage, faster compression, and smaller output. strategy: int(c_default="Z_DEFAULT_STRATEGY") = Z_DEFAULT_STRATEGY Used to tune the compression algorithm. Possible values are Z_DEFAULT_STRATEGY, Z_FILTERED, and Z_HUFFMAN_ONLY. zdict: Py_buffer = None The predefined compression dictionary - a sequence of bytes containing subsequences that are likely to occur in the input data. Return a compressor object. [clinic start generated code]*/ static PyObject * zlib_compressobj_impl(PyModuleDef *module, int level, int method, int wbits, int memLevel, int strategy, Py_buffer *zdict) /*[clinic end generated code: output=2949bbb9a5723ccd input=de2ffab6e910cd8b]*/ { compobject *self = NULL; int err; if (zdict->buf != NULL && (size_t)zdict->len > UINT_MAX) { PyErr_SetString(PyExc_OverflowError, "zdict length does not fit in an unsigned int"); goto error; } self = newcompobject(&Comptype); if (self==NULL) goto error; self->zst.opaque = NULL; self->zst.zalloc = PyZlib_Malloc; self->zst.zfree = PyZlib_Free; self->zst.next_in = NULL; self->zst.avail_in = 0; err = deflateInit2(&self->zst, level, method, wbits, memLevel, strategy); switch(err) { case (Z_OK): self->is_initialised = 1; if (zdict->buf == NULL) { goto success; } else { err = deflateSetDictionary(&self->zst, zdict->buf, (unsigned int)zdict->len); switch (err) { case (Z_OK): goto success; case (Z_STREAM_ERROR): PyErr_SetString(PyExc_ValueError, "Invalid dictionary"); goto error; default: PyErr_SetString(PyExc_ValueError, "deflateSetDictionary()"); goto error; } } case (Z_MEM_ERROR): PyErr_SetString(PyExc_MemoryError, "Can't allocate memory for compression object"); goto error; case(Z_STREAM_ERROR): PyErr_SetString(PyExc_ValueError, "Invalid initialization option"); goto error; default: zlib_error(self->zst, err, "while creating compression object"); goto error; } error: Py_CLEAR(self); success: return (PyObject*)self; } /*[clinic input] zlib.decompressobj wbits: int(c_default="MAX_WBITS") = MAX_WBITS The window buffer size. zdict: object(c_default="NULL") = b'' The predefined compression dictionary. This must be the same dictionary as used by the compressor that produced the input data. Return a decompressor object. [clinic start generated code]*/ static PyObject * zlib_decompressobj_impl(PyModuleDef *module, int wbits, PyObject *zdict) /*[clinic end generated code: output=8ccd583fbd631798 input=67f05145a6920127]*/ { int err; compobject *self; if (zdict != NULL && !PyObject_CheckBuffer(zdict)) { PyErr_SetString(PyExc_TypeError, "zdict argument must support the buffer protocol"); return NULL; } self = newcompobject(&Decomptype); if (self == NULL) return(NULL); self->zst.opaque = NULL; self->zst.zalloc = PyZlib_Malloc; self->zst.zfree = PyZlib_Free; self->zst.next_in = NULL; self->zst.avail_in = 0; if (zdict != NULL) { Py_INCREF(zdict); self->zdict = zdict; } err = inflateInit2(&self->zst, wbits); switch(err) { case (Z_OK): self->is_initialised = 1; return (PyObject*)self; case(Z_STREAM_ERROR): Py_DECREF(self); PyErr_SetString(PyExc_ValueError, "Invalid initialization option"); return NULL; case (Z_MEM_ERROR): Py_DECREF(self); PyErr_SetString(PyExc_MemoryError, "Can't allocate memory for decompression object"); return NULL; default: zlib_error(self->zst, err, "while creating decompression object"); Py_DECREF(self); return NULL; } } static void Dealloc(compobject *self) { #ifdef WITH_THREAD PyThread_free_lock(self->lock); #endif Py_XDECREF(self->unused_data); Py_XDECREF(self->unconsumed_tail); Py_XDECREF(self->zdict); PyObject_Del(self); } static void Comp_dealloc(compobject *self) { if (self->is_initialised) deflateEnd(&self->zst); Dealloc(self); } static void Decomp_dealloc(compobject *self) { if (self->is_initialised) inflateEnd(&self->zst); Dealloc(self); } /*[clinic input] zlib.Compress.compress data: Py_buffer Binary data to be compressed. / Returns a bytes object containing compressed data. After calling this function, some of the input data may still be stored in internal buffers for later processing. Call the flush() method to clear these buffers. [clinic start generated code]*/ static PyObject * zlib_Compress_compress_impl(compobject *self, Py_buffer *data) /*[clinic end generated code: output=5d5cd791cbc6a7f4 input=0d95908d6e64fab8]*/ { int err; unsigned int inplen; unsigned int length = DEF_BUF_SIZE, new_length; PyObject *RetVal; Byte *input; unsigned long start_total_out; if ((size_t)data->len > UINT_MAX) { PyErr_SetString(PyExc_OverflowError, "Size does not fit in an unsigned int"); return NULL; } input = data->buf; inplen = (unsigned int)data->len; if (!(RetVal = PyBytes_FromStringAndSize(NULL, length))) return NULL; ENTER_ZLIB(self); start_total_out = self->zst.total_out; self->zst.avail_in = inplen; self->zst.next_in = input; self->zst.avail_out = length; self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal); Py_BEGIN_ALLOW_THREADS err = deflate(&(self->zst), Z_NO_FLUSH); Py_END_ALLOW_THREADS /* while Z_OK and the output buffer is full, there might be more output, so extend the output buffer and try again */ while (err == Z_OK && self->zst.avail_out == 0) { if (length <= (UINT_MAX >> 1)) new_length = length << 1; else new_length = UINT_MAX; if (_PyBytes_Resize(&RetVal, new_length) < 0) { Py_CLEAR(RetVal); goto done; } self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal) + length; self->zst.avail_out = length; length = new_length; Py_BEGIN_ALLOW_THREADS err = deflate(&(self->zst), Z_NO_FLUSH); Py_END_ALLOW_THREADS } /* We will only get Z_BUF_ERROR if the output buffer was full but there wasn't more output when we tried again, so it is not an error condition. */ if (err != Z_OK && err != Z_BUF_ERROR) { zlib_error(self->zst, err, "while compressing data"); Py_CLEAR(RetVal); goto done; } if (_PyBytes_Resize(&RetVal, self->zst.total_out - start_total_out) < 0) { Py_CLEAR(RetVal); } done: LEAVE_ZLIB(self); return RetVal; } /* Helper for objdecompress() and unflush(). Saves any unconsumed input data in self->unused_data or self->unconsumed_tail, as appropriate. */ static int save_unconsumed_input(compobject *self, int err) { if (err == Z_STREAM_END) { /* The end of the compressed data has been reached. Store the leftover input data in self->unused_data. */ if (self->zst.avail_in > 0) { Py_ssize_t old_size = PyBytes_GET_SIZE(self->unused_data); Py_ssize_t new_size; PyObject *new_data; if ((size_t)self->zst.avail_in > (size_t)UINT_MAX - (size_t)old_size) { PyErr_NoMemory(); return -1; } new_size = old_size + self->zst.avail_in; new_data = PyBytes_FromStringAndSize(NULL, new_size); if (new_data == NULL) return -1; Py_MEMCPY(PyBytes_AS_STRING(new_data), PyBytes_AS_STRING(self->unused_data), old_size); Py_MEMCPY(PyBytes_AS_STRING(new_data) + old_size, self->zst.next_in, self->zst.avail_in); Py_SETREF(self->unused_data, new_data); self->zst.avail_in = 0; } } if (self->zst.avail_in > 0 || PyBytes_GET_SIZE(self->unconsumed_tail)) { /* This code handles two distinct cases: 1. Output limit was reached. Save leftover input in unconsumed_tail. 2. All input data was consumed. Clear unconsumed_tail. */ PyObject *new_data = PyBytes_FromStringAndSize( (char *)self->zst.next_in, self->zst.avail_in); if (new_data == NULL) return -1; Py_SETREF(self->unconsumed_tail, new_data); } return 0; } /*[clinic input] zlib.Decompress.decompress data: Py_buffer The binary data to decompress. max_length: capped_uint = 0 The maximum allowable length of the decompressed data. Unconsumed input data will be stored in the unconsumed_tail attribute. / Return a bytes object containing the decompressed version of the data. After calling this function, some of the input data may still be stored in internal buffers for later processing. Call the flush() method to clear these buffers. [clinic start generated code]*/ static PyObject * zlib_Decompress_decompress_impl(compobject *self, Py_buffer *data, unsigned int max_length) /*[clinic end generated code: output=b82e2a2c19f5fe7b input=68b6508ab07c2cf0]*/ { int err; unsigned int old_length, length = DEF_BUF_SIZE; PyObject *RetVal = NULL; unsigned long start_total_out; if ((size_t)data->len > UINT_MAX) { PyErr_SetString(PyExc_OverflowError, "Size does not fit in an unsigned int"); return NULL; } /* limit amount of data allocated to max_length */ if (max_length && length > max_length) length = max_length; if (!(RetVal = PyBytes_FromStringAndSize(NULL, length))) return NULL; ENTER_ZLIB(self); start_total_out = self->zst.total_out; self->zst.avail_in = (unsigned int)data->len; self->zst.next_in = data->buf; self->zst.avail_out = length; self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal); Py_BEGIN_ALLOW_THREADS err = inflate(&(self->zst), Z_SYNC_FLUSH); Py_END_ALLOW_THREADS if (err == Z_NEED_DICT && self->zdict != NULL) { Py_buffer zdict_buf; if (PyObject_GetBuffer(self->zdict, &zdict_buf, PyBUF_SIMPLE) == -1) { Py_DECREF(RetVal); RetVal = NULL; goto error; } if ((size_t)zdict_buf.len > UINT_MAX) { PyErr_SetString(PyExc_OverflowError, "zdict length does not fit in an unsigned int"); PyBuffer_Release(&zdict_buf); Py_CLEAR(RetVal); goto error; } err = inflateSetDictionary(&(self->zst), zdict_buf.buf, (unsigned int)zdict_buf.len); PyBuffer_Release(&zdict_buf); if (err != Z_OK) { zlib_error(self->zst, err, "while decompressing data"); Py_CLEAR(RetVal); goto error; } /* Repeat the call to inflate. */ Py_BEGIN_ALLOW_THREADS err = inflate(&(self->zst), Z_SYNC_FLUSH); Py_END_ALLOW_THREADS } /* While Z_OK and the output buffer is full, there might be more output. So extend the output buffer and try again. */ while (err == Z_OK && self->zst.avail_out == 0) { /* If max_length set, don't continue decompressing if we've already reached the limit. */ if (max_length && length >= max_length) break; /* otherwise, ... */ old_length = length; length = length << 1; if (max_length && length > max_length) length = max_length; if (_PyBytes_Resize(&RetVal, length) < 0) { Py_CLEAR(RetVal); goto error; } self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal) + old_length; self->zst.avail_out = length - old_length; Py_BEGIN_ALLOW_THREADS err = inflate(&(self->zst), Z_SYNC_FLUSH); Py_END_ALLOW_THREADS } if (save_unconsumed_input(self, err) < 0) { Py_DECREF(RetVal); RetVal = NULL; goto error; } if (err == Z_STREAM_END) { /* This is the logical place to call inflateEnd, but the old behaviour of only calling it on flush() is preserved. */ self->eof = 1; } else if (err != Z_OK && err != Z_BUF_ERROR) { /* We will only get Z_BUF_ERROR if the output buffer was full but there wasn't more output when we tried again, so it is not an error condition. */ zlib_error(self->zst, err, "while decompressing data"); Py_DECREF(RetVal); RetVal = NULL; goto error; } if (_PyBytes_Resize(&RetVal, self->zst.total_out - start_total_out) < 0) { Py_CLEAR(RetVal); } error: LEAVE_ZLIB(self); return RetVal; } /*[clinic input] zlib.Compress.flush mode: int(c_default="Z_FINISH") = zlib.Z_FINISH One of the constants Z_SYNC_FLUSH, Z_FULL_FLUSH, Z_FINISH. If mode == Z_FINISH, the compressor object can no longer be used after calling the flush() method. Otherwise, more data can still be compressed. / Return a bytes object containing any remaining compressed data. [clinic start generated code]*/ static PyObject * zlib_Compress_flush_impl(compobject *self, int mode) /*[clinic end generated code: output=a203f4cefc9de727 input=73ed066794bd15bc]*/ { int err; unsigned int length = DEF_BUF_SIZE, new_length; PyObject *RetVal; unsigned long start_total_out; /* Flushing with Z_NO_FLUSH is a no-op, so there's no point in doing any work at all; just return an empty string. */ if (mode == Z_NO_FLUSH) { return PyBytes_FromStringAndSize(NULL, 0); } if (!(RetVal = PyBytes_FromStringAndSize(NULL, length))) return NULL; ENTER_ZLIB(self); start_total_out = self->zst.total_out; self->zst.avail_in = 0; self->zst.avail_out = length; self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal); Py_BEGIN_ALLOW_THREADS err = deflate(&(self->zst), mode); Py_END_ALLOW_THREADS /* while Z_OK and the output buffer is full, there might be more output, so extend the output buffer and try again */ while (err == Z_OK && self->zst.avail_out == 0) { if (length <= (UINT_MAX >> 1)) new_length = length << 1; else new_length = UINT_MAX; if (_PyBytes_Resize(&RetVal, new_length) < 0) { Py_CLEAR(RetVal); goto error; } self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal) + length; self->zst.avail_out = length; length = new_length; Py_BEGIN_ALLOW_THREADS err = deflate(&(self->zst), mode); Py_END_ALLOW_THREADS } /* If mode is Z_FINISH, we also have to call deflateEnd() to free various data structures. Note we should only get Z_STREAM_END when mode is Z_FINISH, but checking both for safety*/ if (err == Z_STREAM_END && mode == Z_FINISH) { err = deflateEnd(&(self->zst)); if (err != Z_OK) { zlib_error(self->zst, err, "while finishing compression"); Py_DECREF(RetVal); RetVal = NULL; goto error; } else self->is_initialised = 0; /* We will only get Z_BUF_ERROR if the output buffer was full but there wasn't more output when we tried again, so it is not an error condition. */ } else if (err!=Z_OK && err!=Z_BUF_ERROR) { zlib_error(self->zst, err, "while flushing"); Py_DECREF(RetVal); RetVal = NULL; goto error; } if (_PyBytes_Resize(&RetVal, self->zst.total_out - start_total_out) < 0) { Py_CLEAR(RetVal); } error: LEAVE_ZLIB(self); return RetVal; } #ifdef HAVE_ZLIB_COPY /*[clinic input] zlib.Compress.copy Return a copy of the compression object. [clinic start generated code]*/ static PyObject * zlib_Compress_copy_impl(compobject *self) /*[clinic end generated code: output=5144aa153c21e805 input=c656351f94b82718]*/ { compobject *retval = NULL; int err; retval = newcompobject(&Comptype); if (!retval) return NULL; /* Copy the zstream state * We use ENTER_ZLIB / LEAVE_ZLIB to make this thread-safe */ ENTER_ZLIB(self); err = deflateCopy(&retval->zst, &self->zst); switch(err) { case(Z_OK): break; case(Z_STREAM_ERROR): PyErr_SetString(PyExc_ValueError, "Inconsistent stream state"); goto error; case(Z_MEM_ERROR): PyErr_SetString(PyExc_MemoryError, "Can't allocate memory for compression object"); goto error; default: zlib_error(self->zst, err, "while copying compression object"); goto error; } Py_INCREF(self->unused_data); Py_XSETREF(retval->unused_data, self->unused_data); Py_INCREF(self->unconsumed_tail); Py_XSETREF(retval->unconsumed_tail, self->unconsumed_tail); Py_XINCREF(self->zdict); Py_XSETREF(retval->zdict, self->zdict); retval->eof = self->eof; /* Mark it as being initialized */ retval->is_initialised = 1; LEAVE_ZLIB(self); return (PyObject *)retval; error: LEAVE_ZLIB(self); Py_XDECREF(retval); return NULL; } /*[clinic input] zlib.Decompress.copy Return a copy of the decompression object. [clinic start generated code]*/ static PyObject * zlib_Decompress_copy_impl(compobject *self) /*[clinic end generated code: output=02a883a2a510c8cc input=ba6c3e96712a596b]*/ { compobject *retval = NULL; int err; retval = newcompobject(&Decomptype); if (!retval) return NULL; /* Copy the zstream state * We use ENTER_ZLIB / LEAVE_ZLIB to make this thread-safe */ ENTER_ZLIB(self); err = inflateCopy(&retval->zst, &self->zst); switch(err) { case(Z_OK): break; case(Z_STREAM_ERROR): PyErr_SetString(PyExc_ValueError, "Inconsistent stream state"); goto error; case(Z_MEM_ERROR): PyErr_SetString(PyExc_MemoryError, "Can't allocate memory for decompression object"); goto error; default: zlib_error(self->zst, err, "while copying decompression object"); goto error; } Py_INCREF(self->unused_data); Py_XSETREF(retval->unused_data, self->unused_data); Py_INCREF(self->unconsumed_tail); Py_XSETREF(retval->unconsumed_tail, self->unconsumed_tail); Py_XINCREF(self->zdict); Py_XSETREF(retval->zdict, self->zdict); retval->eof = self->eof; /* Mark it as being initialized */ retval->is_initialised = 1; LEAVE_ZLIB(self); return (PyObject *)retval; error: LEAVE_ZLIB(self); Py_XDECREF(retval); return NULL; } #endif /*[clinic input] zlib.Decompress.flush length: capped_uint(c_default="DEF_BUF_SIZE") = zlib.DEF_BUF_SIZE the initial size of the output buffer. / Return a bytes object containing any remaining decompressed data. [clinic start generated code]*/ static PyObject * zlib_Decompress_flush_impl(compobject *self, unsigned int length) /*[clinic end generated code: output=db6fb753ab698e22 input=1bb961eb21b62aa0]*/ { int err; unsigned int new_length; PyObject * retval = NULL; unsigned long start_total_out; Py_ssize_t size; if (length == 0) { PyErr_SetString(PyExc_ValueError, "length must be greater than zero"); return NULL; } if (!(retval = PyBytes_FromStringAndSize(NULL, length))) return NULL; ENTER_ZLIB(self); size = PyBytes_GET_SIZE(self->unconsumed_tail); start_total_out = self->zst.total_out; /* save_unconsumed_input() ensures that unconsumed_tail length is lesser or equal than UINT_MAX */ self->zst.avail_in = Py_SAFE_DOWNCAST(size, Py_ssize_t, unsigned int); self->zst.next_in = (Byte *)PyBytes_AS_STRING(self->unconsumed_tail); self->zst.avail_out = length; self->zst.next_out = (Byte *)PyBytes_AS_STRING(retval); Py_BEGIN_ALLOW_THREADS err = inflate(&(self->zst), Z_FINISH); Py_END_ALLOW_THREADS /* while Z_OK and the output buffer is full, there might be more output, so extend the output buffer and try again */ while ((err == Z_OK || err == Z_BUF_ERROR) && self->zst.avail_out == 0) { if (length <= (UINT_MAX >> 1)) new_length = length << 1; else new_length = UINT_MAX; if (_PyBytes_Resize(&retval, new_length) < 0) { Py_CLEAR(retval); goto error; } self->zst.next_out = (Byte *)PyBytes_AS_STRING(retval) + length; self->zst.avail_out = length; length = new_length; Py_BEGIN_ALLOW_THREADS err = inflate(&(self->zst), Z_FINISH); Py_END_ALLOW_THREADS } if (save_unconsumed_input(self, err) < 0) { Py_DECREF(retval); retval = NULL; goto error; } /* If at end of stream, clean up any memory allocated by zlib. */ if (err == Z_STREAM_END) { self->eof = 1; self->is_initialised = 0; err = inflateEnd(&(self->zst)); if (err != Z_OK) { zlib_error(self->zst, err, "while finishing decompression"); Py_DECREF(retval); retval = NULL; goto error; } } if (_PyBytes_Resize(&retval, self->zst.total_out - start_total_out) < 0) { Py_CLEAR(retval); } error: LEAVE_ZLIB(self); return retval; } #include "clinic/zlibmodule.c.h" static PyMethodDef comp_methods[] = { ZLIB_COMPRESS_COMPRESS_METHODDEF ZLIB_COMPRESS_FLUSH_METHODDEF #ifdef HAVE_ZLIB_COPY ZLIB_COMPRESS_COPY_METHODDEF #endif {NULL, NULL} }; static PyMethodDef Decomp_methods[] = { ZLIB_DECOMPRESS_DECOMPRESS_METHODDEF ZLIB_DECOMPRESS_FLUSH_METHODDEF #ifdef HAVE_ZLIB_COPY ZLIB_DECOMPRESS_COPY_METHODDEF #endif {NULL, NULL} }; #define COMP_OFF(x) offsetof(compobject, x) static PyMemberDef Decomp_members[] = { {"unused_data", T_OBJECT, COMP_OFF(unused_data), READONLY}, {"unconsumed_tail", T_OBJECT, COMP_OFF(unconsumed_tail), READONLY}, {"eof", T_BOOL, COMP_OFF(eof), READONLY}, {NULL}, }; /*[clinic input] zlib.adler32 data: Py_buffer value: unsigned_int(bitwise=True) = 1 Starting value of the checksum. / Compute an Adler-32 checksum of data. The returned checksum is an integer. [clinic start generated code]*/ static PyObject * zlib_adler32_impl(PyModuleDef *module, Py_buffer *data, unsigned int value) /*[clinic end generated code: output=51d6d75ee655c78a input=6ff4557872160e88]*/ { /* Releasing the GIL for very small buffers is inefficient and may lower performance */ if (data->len > 1024*5) { unsigned char *buf = data->buf; Py_ssize_t len = data->len; Py_BEGIN_ALLOW_THREADS /* Avoid truncation of length for very large buffers. adler32() takes length as an unsigned int, which may be narrower than Py_ssize_t. */ while ((size_t)len > UINT_MAX) { value = adler32(value, buf, UINT_MAX); buf += (size_t) UINT_MAX; len -= (size_t) UINT_MAX; } value = adler32(value, buf, (unsigned int)len); Py_END_ALLOW_THREADS } else { value = adler32(value, data->buf, (unsigned int)data->len); } return PyLong_FromUnsignedLong(value & 0xffffffffU); } /*[clinic input] zlib.crc32 data: Py_buffer value: unsigned_int(bitwise=True) = 0 Starting value of the checksum. / Compute a CRC-32 checksum of data. The returned checksum is an integer. [clinic start generated code]*/ static PyObject * zlib_crc32_impl(PyModuleDef *module, Py_buffer *data, unsigned int value) /*[clinic end generated code: output=c1e986e74fe7b623 input=26c3ed430fa00b4c]*/ { int signed_val; /* Releasing the GIL for very small buffers is inefficient and may lower performance */ if (data->len > 1024*5) { unsigned char *buf = data->buf; Py_ssize_t len = data->len; Py_BEGIN_ALLOW_THREADS /* Avoid truncation of length for very large buffers. crc32() takes length as an unsigned int, which may be narrower than Py_ssize_t. */ while ((size_t)len > UINT_MAX) { value = crc32(value, buf, UINT_MAX); buf += (size_t) UINT_MAX; len -= (size_t) UINT_MAX; } signed_val = crc32(value, buf, (unsigned int)len); Py_END_ALLOW_THREADS } else { signed_val = crc32(value, data->buf, (unsigned int)data->len); } return PyLong_FromUnsignedLong(signed_val & 0xffffffffU); } static PyMethodDef zlib_methods[] = { ZLIB_ADLER32_METHODDEF ZLIB_COMPRESS_METHODDEF ZLIB_COMPRESSOBJ_METHODDEF ZLIB_CRC32_METHODDEF ZLIB_DECOMPRESS_METHODDEF ZLIB_DECOMPRESSOBJ_METHODDEF {NULL, NULL} }; static PyTypeObject Comptype = { PyVarObject_HEAD_INIT(0, 0) "zlib.Compress", sizeof(compobject), 0, (destructor)Comp_dealloc, /*tp_dealloc*/ 0, /*tp_print*/ 0, /*tp_getattr*/ 0, /*tp_setattr*/ 0, /*tp_reserved*/ 0, /*tp_repr*/ 0, /*tp_as_number*/ 0, /*tp_as_sequence*/ 0, /*tp_as_mapping*/ 0, /*tp_hash*/ 0, /*tp_call*/ 0, /*tp_str*/ 0, /*tp_getattro*/ 0, /*tp_setattro*/ 0, /*tp_as_buffer*/ Py_TPFLAGS_DEFAULT, /*tp_flags*/ 0, /*tp_doc*/ 0, /*tp_traverse*/ 0, /*tp_clear*/ 0, /*tp_richcompare*/ 0, /*tp_weaklistoffset*/ 0, /*tp_iter*/ 0, /*tp_iternext*/ comp_methods, /*tp_methods*/ }; static PyTypeObject Decomptype = { PyVarObject_HEAD_INIT(0, 0) "zlib.Decompress", sizeof(compobject), 0, (destructor)Decomp_dealloc, /*tp_dealloc*/ 0, /*tp_print*/ 0, /*tp_getattr*/ 0, /*tp_setattr*/ 0, /*tp_reserved*/ 0, /*tp_repr*/ 0, /*tp_as_number*/ 0, /*tp_as_sequence*/ 0, /*tp_as_mapping*/ 0, /*tp_hash*/ 0, /*tp_call*/ 0, /*tp_str*/ 0, /*tp_getattro*/ 0, /*tp_setattro*/ 0, /*tp_as_buffer*/ Py_TPFLAGS_DEFAULT, /*tp_flags*/ 0, /*tp_doc*/ 0, /*tp_traverse*/ 0, /*tp_clear*/ 0, /*tp_richcompare*/ 0, /*tp_weaklistoffset*/ 0, /*tp_iter*/ 0, /*tp_iternext*/ Decomp_methods, /*tp_methods*/ Decomp_members, /*tp_members*/ }; PyDoc_STRVAR(zlib_module_documentation, "The functions in this module allow compression and decompression using the\n" "zlib library, which is based on GNU zip.\n" "\n" "adler32(string[, start]) -- Compute an Adler-32 checksum.\n" "compress(string[, level]) -- Compress string, with compression level in 0-9.\n" "compressobj([level[, ...]]) -- Return a compressor object.\n" "crc32(string[, start]) -- Compute a CRC-32 checksum.\n" "decompress(string,[wbits],[bufsize]) -- Decompresses a compressed string.\n" "decompressobj([wbits[, zdict]]]) -- Return a decompressor object.\n" "\n" "'wbits' is window buffer size.\n" "Compressor objects support compress() and flush() methods; decompressor\n" "objects support decompress() and flush()."); static struct PyModuleDef zlibmodule = { PyModuleDef_HEAD_INIT, "zlib", zlib_module_documentation, -1, zlib_methods, NULL, NULL, NULL, NULL }; PyMODINIT_FUNC PyInit_zlib(void) { PyObject *m, *ver; if (PyType_Ready(&Comptype) < 0) return NULL; if (PyType_Ready(&Decomptype) < 0) return NULL; m = PyModule_Create(&zlibmodule); if (m == NULL) return NULL; ZlibError = PyErr_NewException("zlib.error", NULL, NULL); if (ZlibError != NULL) { Py_INCREF(ZlibError); PyModule_AddObject(m, "error", ZlibError); } PyModule_AddIntMacro(m, MAX_WBITS); PyModule_AddIntMacro(m, DEFLATED); PyModule_AddIntMacro(m, DEF_MEM_LEVEL); PyModule_AddIntMacro(m, DEF_BUF_SIZE); PyModule_AddIntMacro(m, Z_BEST_SPEED); PyModule_AddIntMacro(m, Z_BEST_COMPRESSION); PyModule_AddIntMacro(m, Z_DEFAULT_COMPRESSION); PyModule_AddIntMacro(m, Z_FILTERED); PyModule_AddIntMacro(m, Z_HUFFMAN_ONLY); PyModule_AddIntMacro(m, Z_DEFAULT_STRATEGY); PyModule_AddIntMacro(m, Z_FINISH); PyModule_AddIntMacro(m, Z_NO_FLUSH); PyModule_AddIntMacro(m, Z_SYNC_FLUSH); PyModule_AddIntMacro(m, Z_FULL_FLUSH); ver = PyUnicode_FromString(ZLIB_VERSION); if (ver != NULL) PyModule_AddObject(m, "ZLIB_VERSION", ver); ver = PyUnicode_FromString(zlibVersion()); if (ver != NULL) PyModule_AddObject(m, "ZLIB_RUNTIME_VERSION", ver); PyModule_AddStringConstant(m, "__version__", "1.0"); return m; }