dnl Process this file with autoconf 2.0 or later to make a configure script. # Set VERSION so we only need to edit in one place (i.e., here) m4_define(PYTHON_VERSION, 3.0) AC_REVISION($Revision$) AC_PREREQ(2.61) AC_INIT(python, PYTHON_VERSION, http://www.python.org/python-bugs) AC_CONFIG_SRCDIR([Include/object.h]) AC_CONFIG_HEADER(pyconfig.h) dnl This is for stuff that absolutely must end up in pyconfig.h. dnl Please use pyport.h instead, if possible. AH_TOP([ #ifndef Py_PYCONFIG_H #define Py_PYCONFIG_H ]) AH_BOTTOM([ /* Define the macros needed if on a UnixWare 7.x system. */ #if defined(__USLC__) && defined(__SCO_VERSION__) #define STRICT_SYSV_CURSES /* Don't use ncurses extensions */ #endif #endif /*Py_PYCONFIG_H*/ ]) # We don't use PACKAGE_ variables, and they cause conflicts # with other autoconf-based packages that include Python.h grep -v 'define PACKAGE_' confdefs.h.new rm confdefs.h mv confdefs.h.new confdefs.h AC_SUBST(VERSION) VERSION=PYTHON_VERSION AC_SUBST(SOVERSION) SOVERSION=1.0 # The later defininition of _XOPEN_SOURCE disables certain features # on Linux, so we need _GNU_SOURCE to re-enable them (makedev, tm_zone). AC_DEFINE(_GNU_SOURCE, 1, [Define on Linux to activate all library features]) # The later defininition of _XOPEN_SOURCE and _POSIX_C_SOURCE disables # certain features on NetBSD, so we need _NETBSD_SOURCE to re-enable # them. AC_DEFINE(_NETBSD_SOURCE, 1, [Define on NetBSD to activate all library features]) # The later defininition of _XOPEN_SOURCE and _POSIX_C_SOURCE disables # certain features on FreeBSD, so we need __BSD_VISIBLE to re-enable # them. AC_DEFINE(__BSD_VISIBLE, 1, [Define on FreeBSD to activate all library features]) # The later defininition of _XOPEN_SOURCE and _POSIX_C_SOURCE disables # u_int on Irix 5.3. Defining _BSD_TYPES brings it back. AC_DEFINE(_BSD_TYPES, 1, [Define on Irix to enable u_int]) define_xopen_source=yes # Arguments passed to configure. AC_SUBST(CONFIG_ARGS) CONFIG_ARGS="$ac_configure_args" AC_ARG_ENABLE(universalsdk, AC_HELP_STRING(--enable-universalsdk@<:@=SDKDIR@:>@, Build against Mac OS X 10.4u SDK (ppc/i386)), [ case $enableval in yes) enableval=/Developer/SDKs/MacOSX10.4u.sdk ;; esac case $enableval in no) UNIVERSALSDK= enable_universalsdk= ;; *) UNIVERSALSDK=$enableval ;; esac ],[ UNIVERSALSDK= enable_universalsdk= ]) AC_SUBST(UNIVERSALSDK) dnl quadrigraphs "@<:@" and "@:>@" produce "[" and "]" in the output AC_ARG_ENABLE(framework, AC_HELP_STRING(--enable-framework@<:@=INSTALLDIR@:>@, Build (MacOSX|Darwin) framework), [ case $enableval in yes) enableval=/Library/Frameworks esac case $enableval in no) PYTHONFRAMEWORK= PYTHONFRAMEWORKDIR=no-framework PYTHONFRAMEWORKPREFIX= PYTHONFRAMEWORKINSTALLDIR= FRAMEWORKINSTALLFIRST= FRAMEWORKINSTALLLAST= FRAMEWORKALTINSTALLFIRST= FRAMEWORKALTINSTALLLAST= if test "x${prefix}" = "xNONE"; then FRAMEWORKUNIXTOOLSPREFIX="${ac_default_prefix}" else FRAMEWORKUNIXTOOLSPREFIX="${prefix}" fi enable_framework= ;; *) PYTHONFRAMEWORK=Python PYTHONFRAMEWORKDIR=Python.framework PYTHONFRAMEWORKPREFIX=$enableval PYTHONFRAMEWORKINSTALLDIR=$PYTHONFRAMEWORKPREFIX/$PYTHONFRAMEWORKDIR FRAMEWORKINSTALLFIRST="frameworkinstallstructure" FRAMEWORKINSTALLLAST="frameworkinstallmaclib frameworkinstallapps frameworkinstallunixtools" FRAMEWORKALTINSTALLFIRST="${FRAMEWORKINSTALLFIRST} bininstall maninstall" FRAMEWORKALTINSTALLLAST="frameworkinstallmaclib frameworkinstallapps frameworkaltinstallunixtools" if test "x${prefix}" = "xNONE" ; then FRAMEWORKUNIXTOOLSPREFIX="${ac_default_prefix}" else FRAMEWORKUNIXTOOLSPREFIX="${prefix}" fi prefix=$PYTHONFRAMEWORKINSTALLDIR/Versions/$VERSION # Add makefiles for Mac specific code to the list of output # files: AC_CONFIG_FILES(Mac/Makefile) AC_CONFIG_FILES(Mac/PythonLauncher/Makefile) AC_CONFIG_FILES(Mac/IDLE/Makefile) esac ],[ PYTHONFRAMEWORK= PYTHONFRAMEWORKDIR=no-framework PYTHONFRAMEWORKPREFIX= PYTHONFRAMEWORKINSTALLDIR= FRAMEWORKINSTALLFIRST= FRAMEWORKINSTALLLAST= FRAMEWORKALTINSTALLFIRST= FRAMEWORKALTINSTALLLAST= if test "x${prefix}" = "xNONE" ; then FRAMEWORKUNIXTOOLSPREFIX="${ac_default_prefix}" else FRAMEWORKUNIXTOOLSPREFIX="${prefix}" fi enable_framework= ]) AC_SUBST(PYTHONFRAMEWORK) AC_SUBST(PYTHONFRAMEWORKDIR) AC_SUBST(PYTHONFRAMEWORKPREFIX) AC_SUBST(PYTHONFRAMEWORKINSTALLDIR) AC_SUBST(FRAMEWORKINSTALLFIRST) AC_SUBST(FRAMEWORKINSTALLLAST) AC_SUBST(FRAMEWORKALTINSTALLFIRST) AC_SUBST(FRAMEWORKALTINSTALLLAST) AC_SUBST(FRAMEWORKUNIXTOOLSPREFIX) ##AC_ARG_WITH(dyld, ## AC_HELP_STRING(--with-dyld, ## Use (OpenStep|Rhapsody) dynamic linker)) ## # Set name for machine-dependent library files AC_SUBST(MACHDEP) AC_MSG_CHECKING(MACHDEP) if test -z "$MACHDEP" then ac_sys_system=`uname -s` if test "$ac_sys_system" = "AIX" -o "$ac_sys_system" = "Monterey64" \ -o "$ac_sys_system" = "UnixWare" -o "$ac_sys_system" = "OpenUNIX"; then ac_sys_release=`uname -v` else ac_sys_release=`uname -r` fi ac_md_system=`echo $ac_sys_system | tr -d '[/ ]' | tr '[[A-Z]]' '[[a-z]]'` ac_md_release=`echo $ac_sys_release | tr -d '[/ ]' | sed 's/^[[A-Z]]\.//' | sed 's/\..*//'` MACHDEP="$ac_md_system$ac_md_release" case $MACHDEP in cygwin*) MACHDEP="cygwin";; darwin*) MACHDEP="darwin";; atheos*) MACHDEP="atheos";; irix646) MACHDEP="irix6";; '') MACHDEP="unknown";; esac fi # Some systems cannot stand _XOPEN_SOURCE being defined at all; they # disable features if it is defined, without any means to access these # features as extensions. For these systems, we skip the definition of # _XOPEN_SOURCE. Before adding a system to the list to gain access to # some feature, make sure there is no alternative way to access this # feature. Also, when using wildcards, make sure you have verified the # need for not defining _XOPEN_SOURCE on all systems matching the # wildcard, and that the wildcard does not include future systems # (which may remove their limitations). dnl quadrigraphs "@<:@" and "@:>@" produce "[" and "]" in the output case $ac_sys_system/$ac_sys_release in # On OpenBSD, select(2) is not available if _XOPEN_SOURCE is defined, # even though select is a POSIX function. Reported by J. Ribbens. # Reconfirmed for OpenBSD 3.3 by Zachary Hamm, for 3.4 by Jason Ish. OpenBSD/2.* | OpenBSD/3.@<:@0123456789@:>@ | OpenBSD/4.@<:@0@:>@) define_xopen_source=no # OpenBSD undoes our definition of __BSD_VISIBLE if _XOPEN_SOURCE is # also defined. This can be overridden by defining _BSD_SOURCE # As this has a different meaning on Linux, only define it on OpenBSD AC_DEFINE(_BSD_SOURCE, 1, [Define on OpenBSD to activate all library features]) ;; # Defining _XOPEN_SOURCE on NetBSD version prior to the introduction of # _NETBSD_SOURCE disables certain features (eg. setgroups). Reported by # Marc Recht NetBSD/1.5 | NetBSD/1.5.* | NetBSD/1.6 | NetBSD/1.6.* | NetBSD/1.6[A-S]) define_xopen_source=no;; # On Solaris 2.6, sys/wait.h is inconsistent in the usage # of union __?sigval. Reported by Stuart Bishop. SunOS/5.6) define_xopen_source=no;; # On UnixWare 7, u_long is never defined with _XOPEN_SOURCE, # but used in /usr/include/netinet/tcp.h. Reported by Tim Rice. # Reconfirmed for 7.1.4 by Martin v. Loewis. OpenUNIX/8.0.0| UnixWare/7.1.@<:@0-4@:>@) define_xopen_source=no;; # On OpenServer 5, u_short is never defined with _XOPEN_SOURCE, # but used in struct sockaddr.sa_family. Reported by Tim Rice. SCO_SV/3.2) define_xopen_source=no;; # On FreeBSD 4.8 and MacOS X 10.2, a bug in ncurses.h means that # it craps out if _XOPEN_EXTENDED_SOURCE is defined. Apparently, # this is fixed in 10.3, which identifies itself as Darwin/7.* # This should hopefully be fixed in FreeBSD 4.9 FreeBSD/4.8* | Darwin/6* ) define_xopen_source=no;; # On AIX 4 and 5.1, mbstate_t is defined only when _XOPEN_SOURCE == 500 but # used in wcsnrtombs() and mbsnrtowcs() even if _XOPEN_SOURCE is not defined # or has another value. By not (re)defining it, the defaults come in place. AIX/4) define_xopen_source=no;; AIX/5) if test `uname -r` -eq 1; then define_xopen_source=no fi ;; # On Mac OS X 10.4, defining _POSIX_C_SOURCE or _XOPEN_SOURCE # disables platform specific features beyond repair. # On Mac OS X 10.3, defining _POSIX_C_SOURCE or _XOPEN_SOURCE # has no effect, don't bother defining them Darwin/@<:@789@:>@.*) define_xopen_source=no ;; esac if test $define_xopen_source = yes then # On Solaris w/ g++ it appears that _XOPEN_SOURCE has to be # defined precisely as g++ defines it # Furthermore, on Solaris 10, XPG6 requires the use of a C99 # compiler case $ac_sys_system/$ac_sys_release in SunOS/5.8|SunOS/5.9|SunOS/5.10) AC_DEFINE(_XOPEN_SOURCE, 500, Define to the level of X/Open that your system supports) ;; *) AC_DEFINE(_XOPEN_SOURCE, 600, Define to the level of X/Open that your system supports) ;; esac # On Tru64 Unix 4.0F, defining _XOPEN_SOURCE also requires # definition of _XOPEN_SOURCE_EXTENDED and _POSIX_C_SOURCE, or else # several APIs are not declared. Since this is also needed in some # cases for HP-UX, we define it globally. # except for Solaris 10, where it must not be defined, # as it implies XPG4.2 case $ac_sys_system/$ac_sys_release in SunOS/5.10) ;; *) AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, Define to activate Unix95-and-earlier features) ;; esac AC_DEFINE(_POSIX_C_SOURCE, 200112L, Define to activate features from IEEE Stds 1003.1-2001) fi # # SGI compilers allow the specification of the both the ABI and the # ISA on the command line. Depending on the values of these switches, # different and often incompatable code will be generated. # # The SGI_ABI variable can be used to modify the CC and LDFLAGS and # thus supply support for various ABI/ISA combinations. The MACHDEP # variable is also adjusted. # AC_SUBST(SGI_ABI) if test ! -z "$SGI_ABI" then CC="cc $SGI_ABI" LDFLAGS="$SGI_ABI $LDFLAGS" MACHDEP=`echo "${MACHDEP}${SGI_ABI}" | sed 's/ *//g'` fi AC_MSG_RESULT($MACHDEP) # And add extra plat-mac for darwin AC_SUBST(EXTRAPLATDIR) AC_SUBST(EXTRAMACHDEPPATH) AC_MSG_CHECKING(EXTRAPLATDIR) if test -z "$EXTRAPLATDIR" then case $MACHDEP in darwin) EXTRAPLATDIR="\$(PLATMACDIRS)" EXTRAMACHDEPPATH="\$(PLATMACPATH)" ;; *) EXTRAPLATDIR="" EXTRAMACHDEPPATH="" ;; esac fi AC_MSG_RESULT($EXTRAPLATDIR) # Record the configure-time value of MACOSX_DEPLOYMENT_TARGET, # it may influence the way we can build extensions, so distutils # needs to check it AC_SUBST(CONFIGURE_MACOSX_DEPLOYMENT_TARGET) AC_SUBST(EXPORT_MACOSX_DEPLOYMENT_TARGET) CONFIGURE_MACOSX_DEPLOYMENT_TARGET= EXPORT_MACOSX_DEPLOYMENT_TARGET='#' # checks for alternative programs # compiler flags are generated in two sets, BASECFLAGS and OPT. OPT is just # for debug/optimization stuff. BASECFLAGS is for flags that are required # just to get things to compile and link. Users are free to override OPT # when running configure or make. The build should not break if they do. # BASECFLAGS should generally not be messed with, however. # XXX shouldn't some/most/all of this code be merged with the stuff later # on that fiddles with OPT and BASECFLAGS? AC_MSG_CHECKING(for --without-gcc) AC_ARG_WITH(gcc, AC_HELP_STRING(--without-gcc,never use gcc), [ case $withval in no) CC=cc without_gcc=yes;; yes) CC=gcc without_gcc=no;; *) CC=$withval without_gcc=$withval;; esac], [ case $ac_sys_system in AIX*) CC=cc_r without_gcc=;; Monterey*) RANLIB=: without_gcc=;; *) without_gcc=no;; esac]) AC_MSG_RESULT($without_gcc) # If the user switches compilers, we can't believe the cache if test ! -z "$ac_cv_prog_CC" -a ! -z "$CC" -a "$CC" != "$ac_cv_prog_CC" then AC_MSG_ERROR([cached CC is different -- throw away $cache_file (it is also a good idea to do 'make clean' before compiling)]) fi AC_PROG_CC AC_SUBST(CXX) AC_SUBST(MAINCC) AC_MSG_CHECKING(for --with-cxx-main=) AC_ARG_WITH(cxx_main, AC_HELP_STRING([--with-cxx-main=], [compile main() and link python executable with C++ compiler]), [ case $withval in no) with_cxx_main=no MAINCC='$(CC)';; yes) with_cxx_main=yes MAINCC='$(CXX)';; *) with_cxx_main=yes MAINCC=$withval if test -z "$CXX" then CXX=$withval fi;; esac], [ with_cxx_main=no MAINCC='$(CC)' ]) AC_MSG_RESULT($with_cxx_main) preset_cxx="$CXX" if test -z "$CXX" then case "$CC" in gcc) AC_PATH_PROG(CXX, [g++], [g++], [notfound]) ;; cc) AC_PATH_PROG(CXX, [c++], [c++], [notfound]) ;; esac if test "$CXX" = "notfound" then CXX="" fi fi if test -z "$CXX" then AC_CHECK_PROGS(CXX, $CCC c++ g++ gcc CC cxx cc++ cl, notfound) if test "$CXX" = "notfound" then CXX="" fi fi if test "$preset_cxx" != "$CXX" then AC_MSG_WARN([ By default, distutils will build C++ extension modules with "$CXX". If this is not intended, then set CXX on the configure command line. ]) fi # checks for UNIX variants that set C preprocessor variables AC_AIX # Check for unsupported systems case $ac_sys_system/$ac_sys_release in atheos*|Linux*/1*) echo This system \($ac_sys_system/$ac_sys_release\) is no longer supported. echo See README for details. exit 1;; esac AC_EXEEXT AC_MSG_CHECKING(for --with-suffix) AC_ARG_WITH(suffix, AC_HELP_STRING(--with-suffix=.exe, set executable suffix), [ case $withval in no) EXEEXT=;; yes) EXEEXT=.exe;; *) EXEEXT=$withval;; esac]) AC_MSG_RESULT($EXEEXT) # Test whether we're running on a non-case-sensitive system, in which # case we give a warning if no ext is given AC_SUBST(BUILDEXEEXT) AC_MSG_CHECKING(for case-insensitive build directory) if test ! -d CaseSensitiveTestDir; then mkdir CaseSensitiveTestDir fi if test -d casesensitivetestdir then AC_MSG_RESULT(yes) BUILDEXEEXT=.exe else AC_MSG_RESULT(no) BUILDEXEEXT=$EXEEXT fi rmdir CaseSensitiveTestDir case $MACHDEP in bsdos*) case $CC in gcc) CC="$CC -D_HAVE_BSDI";; esac;; esac case $ac_sys_system in hp*|HP*) case $CC in cc|*/cc) CC="$CC -Ae";; esac;; Monterey*) case $CC in cc) CC="$CC -Wl,-Bexport";; esac;; SunOS*) # Some functions have a prototype only with that define, e.g. confstr AC_DEFINE(__EXTENSIONS__, 1, [Defined on Solaris to see additional function prototypes.]) ;; esac AC_SUBST(LIBRARY) AC_MSG_CHECKING(LIBRARY) if test -z "$LIBRARY" then LIBRARY='libpython$(VERSION).a' fi AC_MSG_RESULT($LIBRARY) # LDLIBRARY is the name of the library to link against (as opposed to the # name of the library into which to insert object files). BLDLIBRARY is also # the library to link against, usually. On Mac OS X frameworks, BLDLIBRARY # is blank as the main program is not linked directly against LDLIBRARY. # LDLIBRARYDIR is the path to LDLIBRARY, which is made in a subdirectory. On # systems without shared libraries, LDLIBRARY is the same as LIBRARY # (defined in the Makefiles). On Cygwin LDLIBRARY is the import library, # DLLLIBRARY is the shared (i.e., DLL) library. # # RUNSHARED is used to run shared python without installed libraries # # INSTSONAME is the name of the shared library that will be use to install # on the system - some systems like version suffix, others don't AC_SUBST(LDLIBRARY) AC_SUBST(DLLLIBRARY) AC_SUBST(BLDLIBRARY) AC_SUBST(LDLIBRARYDIR) AC_SUBST(INSTSONAME) AC_SUBST(RUNSHARED) LDLIBRARY="$LIBRARY" BLDLIBRARY='$(LDLIBRARY)' INSTSONAME='$(LDLIBRARY)' DLLLIBRARY='' LDLIBRARYDIR='' RUNSHARED='' # LINKCC is the command that links the python executable -- default is $(CC). # If CXX is set, and if it is needed to link a main function that was # compiled with CXX, LINKCC is CXX instead. Always using CXX is undesirable: # python might then depend on the C++ runtime # This is altered for AIX in order to build the export list before # linking. AC_SUBST(LINKCC) AC_MSG_CHECKING(LINKCC) if test -z "$LINKCC" then LINKCC='$(PURIFY) $(MAINCC)' case $ac_sys_system in AIX*) exp_extra="\"\"" if test $ac_sys_release -ge 5 -o \ $ac_sys_release -eq 4 -a `uname -r` -ge 2 ; then exp_extra="." fi LINKCC="\$(srcdir)/Modules/makexp_aix Modules/python.exp $exp_extra \$(LIBRARY); $LINKCC";; Monterey64*) LINKCC="$LINKCC -L/usr/lib/ia64l64";; esac fi AC_MSG_RESULT($LINKCC) AC_MSG_CHECKING(for --enable-shared) AC_ARG_ENABLE(shared, AC_HELP_STRING(--enable-shared, disable/enable building shared python library)) if test -z "$enable_shared" then case $ac_sys_system in CYGWIN* | atheos*) enable_shared="yes";; *) enable_shared="no";; esac fi AC_MSG_RESULT($enable_shared) AC_MSG_CHECKING(for --enable-profiling) AC_ARG_ENABLE(profiling, AC_HELP_STRING(--enable-profiling, enable C-level code profiling), [ac_save_cc="$CC" CC="$CC -pg" AC_TRY_RUN([int main() { return 0; }], ac_enable_profiling="yes", ac_enable_profiling="no", ac_enable_profiling="no") CC="$ac_save_cc"]) AC_MSG_RESULT($ac_enable_profiling) case "$ac_enable_profiling" in "yes") BASECFLAGS="-pg $BASECFLAGS" LDFLAGS="-pg $LDFLAGS" ;; esac AC_MSG_CHECKING(LDLIBRARY) # MacOSX framework builds need more magic. LDLIBRARY is the dynamic # library that we build, but we do not want to link against it (we # will find it with a -framework option). For this reason there is an # extra variable BLDLIBRARY against which Python and the extension # modules are linked, BLDLIBRARY. This is normally the same as # LDLIBRARY, but empty for MacOSX framework builds. if test "$enable_framework" then LDLIBRARY='$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK)' RUNSHARED=DYLD_FRAMEWORK_PATH="`pwd`:$DYLD_FRAMEWORK_PATH" BLDLIBRARY='' else BLDLIBRARY='$(LDLIBRARY)' fi # Other platforms follow if test $enable_shared = "yes"; then AC_DEFINE(Py_ENABLE_SHARED, 1, [Defined if Python is built as a shared library.]) case $ac_sys_system in CYGWIN*) LDLIBRARY='libpython$(VERSION).dll.a' DLLLIBRARY='libpython$(VERSION).dll' ;; SunOS*) LDLIBRARY='libpython$(VERSION).so' BLDLIBRARY='-Wl,-R,$(LIBDIR) -L. -lpython$(VERSION)' RUNSHARED=LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH} INSTSONAME="$LDLIBRARY".$SOVERSION ;; Linux*|GNU*|NetBSD*|FreeBSD*|DragonFly*) LDLIBRARY='libpython$(VERSION).so' BLDLIBRARY='-L. -lpython$(VERSION)' RUNSHARED=LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH} case $ac_sys_system in FreeBSD*) SOVERSION=`echo $SOVERSION|cut -d "." -f 1` ;; esac INSTSONAME="$LDLIBRARY".$SOVERSION ;; hp*|HP*) case `uname -m` in ia64) LDLIBRARY='libpython$(VERSION).so' ;; *) LDLIBRARY='libpython$(VERSION).sl' ;; esac BLDLIBRARY='-Wl,+b,$(LIBDIR) -L. -lpython$(VERSION)' RUNSHARED=SHLIB_PATH=`pwd`:${SHLIB_PATH} ;; OSF*) LDLIBRARY='libpython$(VERSION).so' BLDLIBRARY='-rpath $(LIBDIR) -L. -lpython$(VERSION)' RUNSHARED=LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH} ;; atheos*) LDLIBRARY='libpython$(VERSION).so' BLDLIBRARY='-L. -lpython$(VERSION)' RUNSHARED=DLL_PATH=`pwd`:${DLL_PATH:-/atheos/sys/libs:/atheos/autolnk/lib} ;; esac else # shared is disabled case $ac_sys_system in CYGWIN*) BLDLIBRARY='$(LIBRARY)' LDLIBRARY='libpython$(VERSION).dll.a' ;; esac fi AC_MSG_RESULT($LDLIBRARY) AC_PROG_RANLIB AC_SUBST(AR) AC_CHECK_PROGS(AR, ar aal, ar) AC_SUBST(SVNVERSION) AC_CHECK_PROG(SVNVERSION, svnversion, found, not-found) if test $SVNVERSION = found then SVNVERSION="svnversion \$(srcdir)" else SVNVERSION="echo exported" fi case $MACHDEP in bsdos*|hp*|HP*) # install -d does not work on BSDI or HP-UX if test -z "$INSTALL" then INSTALL="${srcdir}/install-sh -c" fi esac AC_PROG_INSTALL # Not every filesystem supports hard links AC_SUBST(LN) if test -z "$LN" ; then case $ac_sys_system in CYGWIN*) LN="ln -s";; atheos*) LN="ln -s";; *) LN=ln;; esac fi # Check for --with-pydebug AC_MSG_CHECKING(for --with-pydebug) AC_ARG_WITH(pydebug, AC_HELP_STRING(--with-pydebug, build with Py_DEBUG defined), [ if test "$withval" != no then AC_DEFINE(Py_DEBUG, 1, [Define if you want to build an interpreter with many run-time checks.]) AC_MSG_RESULT(yes); Py_DEBUG='true' else AC_MSG_RESULT(no); Py_DEBUG='false' fi], [AC_MSG_RESULT(no)]) # XXX Shouldn't the code above that fiddles with BASECFLAGS and OPT be # merged with this chunk of code? # Optimizer/debugger flags # ------------------------ # (The following bit of code is complicated enough - please keep things # indented properly. Just pretend you're editing Python code. ;-) # There are two parallel sets of case statements below, one that checks to # see if OPT was set and one that does BASECFLAGS setting based upon # compiler and platform. BASECFLAGS tweaks need to be made even if the # user set OPT. # tweak OPT based on compiler and platform, only if the user didn't set # it on the command line AC_SUBST(OPT) if test -z "$OPT" then case $GCC in yes) if test "$CC" != 'g++' ; then STRICT_PROTO="-Wstrict-prototypes" fi # For gcc 4.x we need to use -fwrapv so lets check if its supported if "$CC" -v --help 2>/dev/null |grep -- -fwrapv > /dev/null; then WRAP="-fwrapv" fi case $ac_cv_prog_cc_g in yes) if test "$Py_DEBUG" = 'true' ; then # Optimization messes up debuggers, so turn it off for # debug builds. OPT="-g -Wall $STRICT_PROTO" else OPT="-g $WRAP -O3 -Wall $STRICT_PROTO" fi ;; *) OPT="-O3 -Wall $STRICT_PROTO" ;; esac case $ac_sys_system in SCO_SV*) OPT="$OPT -m486 -DSCO5" ;; esac ;; *) OPT="-O" ;; esac # The current (beta) Monterey compiler dies with optimizations # XXX what is Monterey? Does it still die w/ -O? Can we get rid of this? case $ac_sys_system in Monterey*) OPT="" ;; esac fi AC_SUBST(BASECFLAGS) # tweak BASECFLAGS based on compiler and platform case $GCC in yes) # Python violates C99 rules, by casting between incompatible # pointer types. GCC may generate bad code as a result of that, # so use -fno-strict-aliasing if supported. AC_MSG_CHECKING(whether $CC accepts -fno-strict-aliasing) ac_save_cc="$CC" CC="$CC -fno-strict-aliasing" AC_TRY_RUN([int main() { return 0; }], ac_cv_no_strict_aliasing_ok=yes, ac_cv_no_strict_aliasing_ok=no, ac_cv_no_strict_aliasing_ok=no) CC="$ac_save_cc" AC_MSG_RESULT($ac_cv_no_strict_aliasing_ok) if test $ac_cv_no_strict_aliasing_ok = yes then BASECFLAGS="$BASECFLAGS -fno-strict-aliasing" fi case $ac_sys_system in SCO_SV*) BASECFLAGS="$BASECFLAGS -m486 -DSCO5" ;; # is there any other compiler on Darwin besides gcc? Darwin*) # -Wno-long-double, -no-cpp-precomp, and -mno-fused-madd # used to be here, but non-Apple gcc doesn't accept them. if test "${enable_universalsdk}"; then BASECFLAGS="-arch ppc -arch i386 -isysroot ${UNIVERSALSDK} ${BASECFLAGS}" fi ;; OSF*) BASECFLAGS="$BASECFLAGS -mieee" ;; esac ;; *) case $ac_sys_system in OpenUNIX*|UnixWare*) BASECFLAGS="$BASECFLAGS -K pentium,host,inline,loop_unroll,alloca " ;; OSF*) BASECFLAGS="$BASECFLAGS -ieee -std" ;; SCO_SV*) BASECFLAGS="$BASECFLAGS -belf -Ki486 -DSCO5" ;; esac ;; esac if test "$Py_DEBUG" = 'true'; then : else OPT="-DNDEBUG $OPT" fi if test "$ac_arch_flags" then BASECFLAGS="$BASECFLAGS $ac_arch_flags" fi # disable check for icc since it seems to pass, but generates a warning if test "$CC" = icc then ac_cv_opt_olimit_ok=no fi AC_MSG_CHECKING(whether $CC accepts -OPT:Olimit=0) AC_CACHE_VAL(ac_cv_opt_olimit_ok, [ac_save_cc="$CC" CC="$CC -OPT:Olimit=0" AC_TRY_RUN([int main() { return 0; }], ac_cv_opt_olimit_ok=yes, ac_cv_opt_olimit_ok=no, ac_cv_opt_olimit_ok=no) CC="$ac_save_cc"]) AC_MSG_RESULT($ac_cv_opt_olimit_ok) if test $ac_cv_opt_olimit_ok = yes; then case $ac_sys_system in # XXX is this branch needed? On MacOSX 10.2.2 the result of the # olimit_ok test is "no". Is it "yes" in some other Darwin-esque # environment? Darwin*) ;; *) BASECFLAGS="$BASECFLAGS -OPT:Olimit=0" ;; esac else AC_MSG_CHECKING(whether $CC accepts -Olimit 1500) AC_CACHE_VAL(ac_cv_olimit_ok, [ac_save_cc="$CC" CC="$CC -Olimit 1500" AC_TRY_RUN([int main() { return 0; }], ac_cv_olimit_ok=yes, ac_cv_olimit_ok=no, ac_cv_olimit_ok=no) CC="$ac_save_cc"]) AC_MSG_RESULT($ac_cv_olimit_ok) if test $ac_cv_olimit_ok = yes; then BASECFLAGS="$BASECFLAGS -Olimit 1500" fi fi # Check whether GCC supports PyArg_ParseTuple format if test "$GCC" = "yes" then AC_MSG_CHECKING(whether gcc supports ParseTuple __format__) save_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -Werror" AC_TRY_COMPILE([ void f(char*,...)__attribute((format(PyArg_ParseTuple, 1, 2))); ],, AC_DEFINE(HAVE_ATTRIBUTE_FORMAT_PARSETUPLE, 1, [Define if GCC supports __attribute__((format(PyArg_ParseTuple, 2, 3)))]) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) CFLAGS=$save_CFLAGS fi # On some compilers, pthreads are available without further options # (e.g. MacOS X). On some of these systems, the compiler will not # complain if unaccepted options are passed (e.g. gcc on Mac OS X). # So we have to see first whether pthreads are available without # options before we can check whether -Kpthread improves anything. AC_MSG_CHECKING(whether pthreads are available without options) AC_CACHE_VAL(ac_cv_pthread_is_default, [AC_TRY_RUN([ #include void* routine(void* p){return NULL;} int main(){ pthread_t p; if(pthread_create(&p,NULL,routine,NULL)!=0) return 1; (void)pthread_detach(p); return 0; } ], [ ac_cv_pthread_is_default=yes ac_cv_kthread=no ac_cv_pthread=no ], ac_cv_pthread_is_default=no, ac_cv_pthread_is_default=no) ]) AC_MSG_RESULT($ac_cv_pthread_is_default) if test $ac_cv_pthread_is_default = yes then ac_cv_kpthread=no else # -Kpthread, if available, provides the right #defines # and linker options to make pthread_create available # Some compilers won't report that they do not support -Kpthread, # so we need to run a program to see whether it really made the # function available. AC_MSG_CHECKING(whether $CC accepts -Kpthread) AC_CACHE_VAL(ac_cv_kpthread, [ac_save_cc="$CC" CC="$CC -Kpthread" AC_TRY_RUN([ #include void* routine(void* p){return NULL;} int main(){ pthread_t p; if(pthread_create(&p,NULL,routine,NULL)!=0) return 1; (void)pthread_detach(p); return 0; } ], ac_cv_kpthread=yes, ac_cv_kpthread=no, ac_cv_kpthread=no) CC="$ac_save_cc"]) AC_MSG_RESULT($ac_cv_kpthread) fi if test $ac_cv_kpthread = no -a $ac_cv_pthread_is_default = no then # -Kthread, if available, provides the right #defines # and linker options to make pthread_create available # Some compilers won't report that they do not support -Kthread, # so we need to run a program to see whether it really made the # function available. AC_MSG_CHECKING(whether $CC accepts -Kthread) AC_CACHE_VAL(ac_cv_kthread, [ac_save_cc="$CC" CC="$CC -Kthread" AC_TRY_RUN([ #include void* routine(void* p){return NULL;} int main(){ pthread_t p; if(pthread_create(&p,NULL,routine,NULL)!=0) return 1; (void)pthread_detach(p); return 0; } ], ac_cv_kthread=yes, ac_cv_kthread=no, ac_cv_kthread=no) CC="$ac_save_cc"]) AC_MSG_RESULT($ac_cv_kthread) fi if test $ac_cv_kthread = no -a $ac_cv_pthread_is_default = no then # -pthread, if available, provides the right #defines # and linker options to make pthread_create available # Some compilers won't report that they do not support -pthread, # so we need to run a program to see whether it really made the # function available. AC_MSG_CHECKING(whether $CC accepts -pthread) AC_CACHE_VAL(ac_cv_thread, [ac_save_cc="$CC" CC="$CC -pthread" AC_TRY_RUN([ #include void* routine(void* p){return NULL;} int main(){ pthread_t p; if(pthread_create(&p,NULL,routine,NULL)!=0) return 1; (void)pthread_detach(p); return 0; } ], ac_cv_pthread=yes, ac_cv_pthread=no, ac_cv_pthread=no) CC="$ac_save_cc"]) AC_MSG_RESULT($ac_cv_pthread) fi # If we have set a CC compiler flag for thread support then # check if it works for CXX, too. ac_cv_cxx_thread=no if test ! -z "$CXX" then AC_MSG_CHECKING(whether $CXX also accepts flags for thread support) ac_save_cxx="$CXX" if test "$ac_cv_kpthread" = "yes" then CXX="$CXX -Kpthread" ac_cv_cxx_thread=yes elif test "$ac_cv_kthread" = "yes" then CXX="$CXX -Kthread" ac_cv_cxx_thread=yes elif test "$ac_cv_pthread" = "yes" then CXX="$CXX -pthread" ac_cv_cxx_thread=yes fi if test $ac_cv_cxx_thread = yes then echo 'void foo();int main(){foo();}void foo(){}' > conftest.$ac_ext $CXX -c conftest.$ac_ext 2>&5 if $CXX -o conftest$ac_exeext conftest.$ac_objext 2>&5 \ && test -s conftest$ac_exeext && ./conftest$ac_exeext then ac_cv_cxx_thread=yes else ac_cv_cxx_thread=no fi rm -fr conftest* fi AC_MSG_RESULT($ac_cv_cxx_thread) fi CXX="$ac_save_cxx" dnl # check for ANSI or K&R ("traditional") preprocessor dnl AC_MSG_CHECKING(for C preprocessor type) dnl AC_TRY_COMPILE([ dnl #define spam(name, doc) {#name, &name, #name "() -- " doc} dnl int foo; dnl struct {char *name; int *addr; char *doc;} desc = spam(foo, "something"); dnl ], [;], cpp_type=ansi, AC_DEFINE(HAVE_OLD_CPP) cpp_type=traditional) dnl AC_MSG_RESULT($cpp_type) # checks for header files AC_HEADER_STDC AC_CHECK_HEADERS(asm/types.h conio.h curses.h direct.h dlfcn.h errno.h \ fcntl.h grp.h \ io.h langinfo.h libintl.h ncurses.h poll.h process.h pthread.h \ shadow.h signal.h stdint.h stropts.h termios.h thread.h \ unistd.h utime.h \ sys/audioio.h sys/bsdtty.h sys/epoll.h sys/event.h sys/file.h sys/loadavg.h \ sys/lock.h sys/mkdev.h sys/modem.h \ sys/param.h sys/poll.h sys/select.h sys/socket.h sys/statvfs.h sys/stat.h \ sys/time.h \ sys/times.h sys/types.h sys/un.h sys/utsname.h sys/wait.h pty.h libutil.h \ sys/resource.h netpacket/packet.h sysexits.h bluetooth.h \ bluetooth/bluetooth.h linux/tipc.h) AC_HEADER_DIRENT AC_HEADER_MAJOR # On Solaris, term.h requires curses.h AC_CHECK_HEADERS(term.h,,,[ #ifdef HAVE_CURSES_H #include #endif ]) # On Linux, netlink.h requires asm/types.h AC_CHECK_HEADERS(linux/netlink.h,,,[ #ifdef HAVE_ASM_TYPES_H #include #endif #ifdef HAVE_SYS_SOCKET_H #include #endif ]) # checks for typedefs was_it_defined=no AC_MSG_CHECKING(for clock_t in time.h) AC_EGREP_HEADER(clock_t, time.h, was_it_defined=yes, [ AC_DEFINE(clock_t, long, [Define to 'long' if doesn't define.]) ]) AC_MSG_RESULT($was_it_defined) # Check whether using makedev requires defining _OSF_SOURCE AC_MSG_CHECKING(for makedev) AC_TRY_LINK([#include ], [ makedev(0, 0) ], ac_cv_has_makedev=yes, ac_cv_has_makedev=no) if test "$ac_cv_has_makedev" = "no"; then # we didn't link, try if _OSF_SOURCE will allow us to link AC_TRY_LINK([ #define _OSF_SOURCE 1 #include ], [ makedev(0, 0) ], ac_cv_has_makedev=yes, ac_cv_has_makedev=no) if test "$ac_cv_has_makedev" = "yes"; then AC_DEFINE(_OSF_SOURCE, 1, [Define _OSF_SOURCE to get the makedev macro.]) fi fi AC_MSG_RESULT($ac_cv_has_makedev) if test "$ac_cv_has_makedev" = "yes"; then AC_DEFINE(HAVE_MAKEDEV, 1, [Define this if you have the makedev macro.]) fi # Enabling LFS on Solaris (2.6 to 9) with gcc 2.95 triggers a bug in # the system headers: If _XOPEN_SOURCE and _LARGEFILE_SOURCE are # defined, but the compiler does not support pragma redefine_extname, # and _LARGEFILE64_SOURCE is not defined, the headers refer to 64-bit # structures (such as rlimit64) without declaring them. As a # work-around, disable LFS on such configurations use_lfs=yes AC_MSG_CHECKING(Solaris LFS bug) AC_TRY_COMPILE([ #define _LARGEFILE_SOURCE 1 #define _FILE_OFFSET_BITS 64 #include ],struct rlimit foo;,sol_lfs_bug=no,sol_lfs_bug=yes) AC_MSG_RESULT($sol_lfs_bug) if test "$sol_lfs_bug" = "yes"; then use_lfs=no fi if test "$use_lfs" = "yes"; then # Two defines needed to enable largefile support on various platforms # These may affect some typedefs AC_DEFINE(_LARGEFILE_SOURCE, 1, [This must be defined on some systems to enable large file support.]) AC_DEFINE(_FILE_OFFSET_BITS, 64, [This must be set to 64 on some systems to enable large file support.]) fi # Add some code to confdefs.h so that the test for off_t works on SCO cat >> confdefs.h <<\EOF #if defined(SCO_DS) #undef _OFF_T #endif EOF # Type availability checks AC_TYPE_MODE_T AC_TYPE_OFF_T AC_TYPE_PID_T AC_TYPE_SIGNAL AC_TYPE_SIZE_T AC_TYPE_UID_T AC_CHECK_TYPE(ssize_t, AC_DEFINE(HAVE_SSIZE_T, 1, Define if your compiler provides ssize_t),,) # Sizes of various common basic types # ANSI C requires sizeof(char) == 1, so no need to check it AC_CHECK_SIZEOF(int, 4) AC_CHECK_SIZEOF(long, 4) AC_CHECK_SIZEOF(void *, 4) AC_CHECK_SIZEOF(short, 2) AC_CHECK_SIZEOF(float, 4) AC_CHECK_SIZEOF(double, 8) AC_CHECK_SIZEOF(fpos_t, 4) AC_CHECK_SIZEOF(size_t, 4) AC_CHECK_SIZEOF(pid_t, 4) AC_MSG_CHECKING(for long long support) have_long_long=no AC_TRY_COMPILE([], [long long x; x = (long long)0;], [ AC_DEFINE(HAVE_LONG_LONG, 1, [Define this if you have the type long long.]) have_long_long=yes ]) AC_MSG_RESULT($have_long_long) if test "$have_long_long" = yes ; then AC_CHECK_SIZEOF(long long, 8) fi AC_MSG_CHECKING(for long double support) have_long_double=no AC_TRY_COMPILE([], [long double x; x = (long double)0;], [ AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define this if you have the type long double.]) have_long_double=yes ]) AC_MSG_RESULT($have_long_double) if test "$have_long_double" = yes ; then AC_CHECK_SIZEOF(long double, 16) fi AC_MSG_CHECKING(for _Bool support) have_c99_bool=no AC_TRY_COMPILE([], [_Bool x; x = (_Bool)0;], [ AC_DEFINE(HAVE_C99_BOOL, 1, [Define this if you have the type _Bool.]) have_c99_bool=yes ]) AC_MSG_RESULT($have_c99_bool) if test "$have_c99_bool" = yes ; then AC_CHECK_SIZEOF(_Bool, 1) fi AC_CHECK_TYPES(uintptr_t, [AC_CHECK_SIZEOF(uintptr_t, 4)], [], [#ifdef HAVE_STDINT_H #include #endif]) # Hmph. AC_CHECK_SIZEOF() doesn't include . AC_MSG_CHECKING(size of off_t) AC_CACHE_VAL(ac_cv_sizeof_off_t, [AC_TRY_RUN([#include #include main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(off_t)); exit(0); }], ac_cv_sizeof_off_t=`cat conftestval`, ac_cv_sizeof_off_t=0, ac_cv_sizeof_off_t=4) ]) AC_MSG_RESULT($ac_cv_sizeof_off_t) AC_DEFINE_UNQUOTED(SIZEOF_OFF_T, $ac_cv_sizeof_off_t, [The number of bytes in an off_t.]) AC_MSG_CHECKING(whether to enable large file support) if test "$have_long_long" = yes -a \ "$ac_cv_sizeof_off_t" -gt "$ac_cv_sizeof_long" -a \ "$ac_cv_sizeof_long_long" -ge "$ac_cv_sizeof_off_t"; then AC_DEFINE(HAVE_LARGEFILE_SUPPORT, 1, [Defined to enable large file support when an off_t is bigger than a long and long long is available and at least as big as an off_t. You may need to add some flags for configuration and compilation to enable this mode. (For Solaris and Linux, the necessary defines are already defined.)]) AC_MSG_RESULT(yes) else AC_MSG_RESULT(no) fi # AC_CHECK_SIZEOF() doesn't include . AC_MSG_CHECKING(size of time_t) AC_CACHE_VAL(ac_cv_sizeof_time_t, [AC_TRY_RUN([#include #include main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(time_t)); exit(0); }], ac_cv_sizeof_time_t=`cat conftestval`, ac_cv_sizeof_time_t=0, ac_cv_sizeof_time_t=4) ]) AC_MSG_RESULT($ac_cv_sizeof_time_t) AC_DEFINE_UNQUOTED(SIZEOF_TIME_T, $ac_cv_sizeof_time_t, [The number of bytes in a time_t.]) # if have pthread_t then define SIZEOF_PTHREAD_T ac_save_cc="$CC" if test "$ac_cv_kpthread" = "yes" then CC="$CC -Kpthread" elif test "$ac_cv_kthread" = "yes" then CC="$CC -Kthread" elif test "$ac_cv_pthread" = "yes" then CC="$CC -pthread" fi AC_MSG_CHECKING(for pthread_t) have_pthread_t=no AC_TRY_COMPILE([#include ], [pthread_t x; x = *(pthread_t*)0;], have_pthread_t=yes) AC_MSG_RESULT($have_pthread_t) if test "$have_pthread_t" = yes ; then # AC_CHECK_SIZEOF() doesn't include . AC_MSG_CHECKING(size of pthread_t) AC_CACHE_VAL(ac_cv_sizeof_pthread_t, [AC_TRY_RUN([#include #include main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(pthread_t)); exit(0); }], ac_cv_sizeof_pthread_t=`cat conftestval`, ac_cv_sizeof_pthread_t=0, ac_cv_sizeof_pthread_t=4) ]) AC_MSG_RESULT($ac_cv_sizeof_pthread_t) AC_DEFINE_UNQUOTED(SIZEOF_PTHREAD_T, $ac_cv_sizeof_pthread_t, [The number of bytes in a pthread_t.]) fi CC="$ac_save_cc" AC_MSG_CHECKING(for --enable-toolbox-glue) AC_ARG_ENABLE(toolbox-glue, AC_HELP_STRING(--enable-toolbox-glue, disable/enable MacOSX glue code for extensions)) if test -z "$enable_toolbox_glue" then case $ac_sys_system/$ac_sys_release in Darwin/*) enable_toolbox_glue="yes";; *) enable_toolbox_glue="no";; esac fi case "$enable_toolbox_glue" in yes) extra_machdep_objs="Python/mactoolboxglue.o" extra_undefs="-u _PyMac_Error" AC_DEFINE(USE_TOOLBOX_OBJECT_GLUE, 1, [Define if you want to use MacPython modules on MacOSX in unix-Python.]) ;; *) extra_machdep_objs="" extra_undefs="" ;; esac AC_MSG_RESULT($enable_toolbox_glue) AC_SUBST(OTHER_LIBTOOL_OPT) case $ac_sys_system/$ac_sys_release in Darwin/@<:@01567@:>@\..*) OTHER_LIBTOOL_OPT="-prebind -seg1addr 0x10000000" ;; Darwin/*) OTHER_LIBTOOL_OPT="" ;; esac AC_SUBST(LIBTOOL_CRUFT) case $ac_sys_system/$ac_sys_release in Darwin/@<:@01567@:>@\..*) LIBTOOL_CRUFT="-framework System -lcc_dynamic" if test "${enable_universalsdk}"; then : else LIBTOOL_CRUFT="${LIBTOOL_CRUFT} -arch_only `arch`" fi LIBTOOL_CRUFT=$LIBTOOL_CRUFT' -install_name $(PYTHONFRAMEWORKINSTALLDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK)' LIBTOOL_CRUFT=$LIBTOOL_CRUFT' -compatibility_version $(VERSION) -current_version $(VERSION)';; Darwin/*) gcc_version=`gcc -v 2>&1 | grep version | cut -d\ -f3` if test ${gcc_version} '<' 4.0 then LIBTOOL_CRUFT="-lcc_dynamic" else LIBTOOL_CRUFT="" fi LIBTOOL_CRUFT=$LIBTOOL_CRUFT" -lSystem -lSystemStubs -arch_only `arch`" LIBTOOL_CRUFT=$LIBTOOL_CRUFT' -install_name $(PYTHONFRAMEWORKINSTALLDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK)' LIBTOOL_CRUFT=$LIBTOOL_CRUFT' -compatibility_version $(VERSION) -current_version $(VERSION)';; esac AC_MSG_CHECKING(for --enable-framework) if test "$enable_framework" then BASECFLAGS="$BASECFLAGS -fno-common -dynamic" # -F. is needed to allow linking to the framework while # in the build location. AC_DEFINE(WITH_NEXT_FRAMEWORK, 1, [Define if you want to produce an OpenStep/Rhapsody framework (shared library plus accessory files).]) AC_MSG_RESULT(yes) else AC_MSG_RESULT(no) fi AC_MSG_CHECKING(for dyld) case $ac_sys_system/$ac_sys_release in Darwin/*) AC_DEFINE(WITH_DYLD, 1, [Define if you want to use the new-style (Openstep, Rhapsody, MacOS) dynamic linker (dyld) instead of the old-style (NextStep) dynamic linker (rld). Dyld is necessary to support frameworks.]) AC_MSG_RESULT(always on for Darwin) ;; *) AC_MSG_RESULT(no) ;; esac # Set info about shared libraries. AC_SUBST(SO) AC_SUBST(LDSHARED) AC_SUBST(BLDSHARED) AC_SUBST(CCSHARED) AC_SUBST(LINKFORSHARED) # SO is the extension of shared libraries `(including the dot!) # -- usually .so, .sl on HP-UX, .dll on Cygwin AC_MSG_CHECKING(SO) if test -z "$SO" then case $ac_sys_system in hp*|HP*) case `uname -m` in ia64) SO=.so;; *) SO=.sl;; esac ;; CYGWIN*) SO=.dll;; *) SO=.so;; esac else # this might also be a termcap variable, see #610332 echo echo '=====================================================================' echo '+ +' echo '+ WARNING: You have set SO in your environment. +' echo '+ Do you really mean to change the extension for shared libraries? +' echo '+ Continuing in 10 seconds to let you to ponder. +' echo '+ +' echo '=====================================================================' sleep 10 fi AC_MSG_RESULT($SO) AC_DEFINE_UNQUOTED(SHLIB_EXT, "$SO", [Define this to be extension of shared libraries (including the dot!).]) # LDSHARED is the ld *command* used to create shared library # -- "cc -G" on SunOS 5.x, "ld -shared" on IRIX 5 # (Shared libraries in this instance are shared modules to be loaded into # Python, as opposed to building Python itself as a shared library.) AC_MSG_CHECKING(LDSHARED) if test -z "$LDSHARED" then case $ac_sys_system/$ac_sys_release in AIX*) BLDSHARED="\$(srcdir)/Modules/ld_so_aix \$(CC) -bI:Modules/python.exp" LDSHARED="\$(BINLIBDEST)/config/ld_so_aix \$(CC) -bI:\$(BINLIBDEST)/config/python.exp" ;; IRIX/5*) LDSHARED="ld -shared";; IRIX*/6*) LDSHARED="ld ${SGI_ABI} -shared -all";; SunOS/5*) if test "$GCC" = "yes" then LDSHARED='$(CC) -shared' else LDSHARED='$(CC) -G'; fi ;; hp*|HP*) LDSHARED="ld -b";; OSF*) LDSHARED="ld -shared -expect_unresolved \"*\"";; Darwin/1.3*) LDSHARED='$(CC) $(LDFLAGS) -bundle' if test "$enable_framework" ; then # Link against the framework. All externals should be defined. BLDSHARED="$LDSHARED "'$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK)' LDSHARED="$LDSHARED "'$(PYTHONFRAMEWORKPREFIX)/$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK)' else # No framework. Ignore undefined symbols, assuming they come from Python LDSHARED="$LDSHARED -undefined suppress" fi ;; Darwin/1.4*|Darwin/5.*|Darwin/6.*) LDSHARED='$(CC) $(LDFLAGS) -bundle' if test "$enable_framework" ; then # Link against the framework. All externals should be defined. BLDSHARED="$LDSHARED "'$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK)' LDSHARED="$LDSHARED "'$(PYTHONFRAMEWORKPREFIX)/$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK)' else # No framework, use the Python app as bundle-loader BLDSHARED="$LDSHARED "'-bundle_loader $(BUILDPYTHON)' LDSHARED="$LDSHARED "'-bundle_loader $(BINDIR)/python$(VERSION)$(EXE)' fi ;; Darwin/*) # Use -undefined dynamic_lookup whenever possible (10.3 and later). # This allows an extension to be used in any Python cur_target=`sw_vers -productVersion | sed 's/\(10\.[[0-9]]*\).*/\1/'` if test ${cur_target} '>' 10.2; then cur_target=10.3 fi CONFIGURE_MACOSX_DEPLOYMENT_TARGET=${MACOSX_DEPLOYMENT_TARGET-${cur_target}} # Make sure that MACOSX_DEPLOYMENT_TARGET is set in the # environment with a value that is the same as what we'll use # in the Makefile to ensure that we'll get the same compiler # environment during configure and build time. MACOSX_DEPLOYMENT_TARGET="$CONFIGURE_MACOSX_DEPLOYMENT_TARGET" export MACOSX_DEPLOYMENT_TARGET EXPORT_MACOSX_DEPLOYMENT_TARGET='' if test ${MACOSX_DEPLOYMENT_TARGET-${cur_target}} '>' 10.2 then if test "${enable_universalsdk}"; then LDFLAGS="-arch i386 -arch ppc -isysroot ${UNIVERSALSDK} ${LDFLAGS}" fi LDSHARED='$(CC) $(LDFLAGS) -bundle -undefined dynamic_lookup' BLDSHARED="$LDSHARED" else LDSHARED='$(CC) $(LDFLAGS) -bundle' if test "$enable_framework" ; then # Link against the framework. All externals should be defined. BLDSHARED="$LDSHARED "'$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK)' LDSHARED="$LDSHARED "'$(PYTHONFRAMEWORKPREFIX)/$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK)' else # No framework, use the Python app as bundle-loader BLDSHARED="$LDSHARED "'-bundle_loader $(BUILDPYTHON)' LDSHARED="$LDSHARED "'-bundle_loader $(BINDIR)/python$(VERSION)$(EXE)' fi fi ;; Linux*|GNU*) LDSHARED='$(CC) -shared';; BSD/OS*/4*) LDSHARED="gcc -shared";; FreeBSD*) if [[ "`$CC -dM -E - &1 | grep export-dynamic >/dev/null then LINKFORSHARED="-Xlinker --export-dynamic" fi;; esac;; CYGWIN*) if test $enable_shared = "no" then LINKFORSHARED='-Wl,--out-implib=$(LDLIBRARY)' fi;; esac fi AC_MSG_RESULT($LINKFORSHARED) AC_SUBST(CFLAGSFORSHARED) AC_MSG_CHECKING(CFLAGSFORSHARED) if test ! "$LIBRARY" = "$LDLIBRARY" then case $ac_sys_system in CYGWIN*) # Cygwin needs CCSHARED when building extension DLLs # but not when building the interpreter DLL. CFLAGSFORSHARED='';; *) CFLAGSFORSHARED='$(CCSHARED)' esac fi AC_MSG_RESULT($CFLAGSFORSHARED) # SHLIBS are libraries (except -lc and -lm) to link to the python shared # library (with --enable-shared). # For platforms on which shared libraries are not allowed to have unresolved # symbols, this must be set to $(LIBS) (expanded by make). We do this even # if it is not required, since it creates a dependency of the shared library # to LIBS. This, in turn, means that applications linking the shared libpython # don't need to link LIBS explicitly. The default should be only changed # on systems where this approach causes problems. AC_SUBST(SHLIBS) AC_MSG_CHECKING(SHLIBS) case "$ac_sys_system" in *) SHLIBS='$(LIBS)';; esac AC_MSG_RESULT($SHLIBS) # checks for libraries AC_CHECK_LIB(dl, dlopen) # Dynamic linking for SunOS/Solaris and SYSV AC_CHECK_LIB(dld, shl_load) # Dynamic linking for HP-UX # only check for sem_ini if thread support is requested if test "$with_threads" = "yes" -o -z "$with_threads"; then AC_SEARCH_LIBS(sem_init, pthread rt posix4) # 'Real Time' functions on Solaris # posix4 on Solaris 2.6 # pthread (first!) on Linux fi # check if we need libintl for locale functions AC_CHECK_LIB(intl, textdomain, AC_DEFINE(WITH_LIBINTL, 1, [Define to 1 if libintl is needed for locale functions.])) # checks for system dependent C++ extensions support case "$ac_sys_system" in AIX*) AC_MSG_CHECKING(for genuine AIX C++ extensions support) AC_TRY_LINK([#include "/usr/lpp/xlC/include/load.h"], [loadAndInit("", 0, "")], [AC_DEFINE(AIX_GENUINE_CPLUSPLUS, 1, [Define for AIX if your compiler is a genuine IBM xlC/xlC_r and you want support for AIX C++ shared extension modules.]) AC_MSG_RESULT(yes)], [AC_MSG_RESULT(no)]);; *) ;; esac # Most SVR4 platforms (e.g. Solaris) need -lsocket and -lnsl. AC_CHECK_LIB(nsl, t_open, [LIBS="-lnsl $LIBS"]) # SVR4 AC_CHECK_LIB(socket, socket, [LIBS="-lsocket $LIBS"], [], $LIBS) # SVR4 sockets AC_MSG_CHECKING(for --with-libs) AC_ARG_WITH(libs, AC_HELP_STRING(--with-libs='lib1 ...', link against additional libs), [ AC_MSG_RESULT($withval) LIBS="$withval $LIBS" ], [AC_MSG_RESULT(no)]) # Check for use of the system libffi library AC_MSG_CHECKING(for --with-system-ffi) AC_ARG_WITH(system_ffi, AC_HELP_STRING(--with-system-ffi, build _ctypes module using an installed ffi library)) AC_MSG_RESULT($with_system_ffi) # Determine if signalmodule should be used. AC_SUBST(USE_SIGNAL_MODULE) AC_SUBST(SIGNAL_OBJS) AC_MSG_CHECKING(for --with-signal-module) AC_ARG_WITH(signal-module, AC_HELP_STRING(--with-signal-module, disable/enable signal module)) if test -z "$with_signal_module" then with_signal_module="yes" fi AC_MSG_RESULT($with_signal_module) if test "${with_signal_module}" = "yes"; then USE_SIGNAL_MODULE="" SIGNAL_OBJS="" else USE_SIGNAL_MODULE="#" SIGNAL_OBJS="Parser/intrcheck.o Python/sigcheck.o" fi # This is used to generate Setup.config AC_SUBST(USE_THREAD_MODULE) USE_THREAD_MODULE="" AC_MSG_CHECKING(for --with-dec-threads) AC_SUBST(LDLAST) AC_ARG_WITH(dec-threads, AC_HELP_STRING(--with-dec-threads, use DEC Alpha/OSF1 thread-safe libraries), [ AC_MSG_RESULT($withval) LDLAST=-threads if test "${with_thread+set}" != set; then with_thread="$withval"; fi], [AC_MSG_RESULT(no)]) # Templates for things AC_DEFINEd more than once. # For a single AC_DEFINE, no template is needed. AH_TEMPLATE(C_THREADS,[Define if you have the Mach cthreads package]) AH_TEMPLATE(_REENTRANT, [Define to force use of thread-safe errno, h_errno, and other functions]) AH_TEMPLATE(WITH_THREAD, [Define if you want to compile in rudimentary thread support]) AC_MSG_CHECKING(for --with-threads) dnl quadrigraphs "@<:@" and "@:>@" produce "[" and "]" in the output AC_ARG_WITH(threads, AC_HELP_STRING(--with(out)-threads@<:@=DIRECTORY@:>@, disable/enable thread support)) # --with-thread is deprecated, but check for it anyway dnl quadrigraphs "@<:@" and "@:>@" produce "[" and "]" in the output AC_ARG_WITH(thread, AC_HELP_STRING(--with(out)-thread@<:@=DIRECTORY@:>@, deprecated; use --with(out)-threads), [with_threads=$with_thread]) if test -z "$with_threads" then with_threads="yes" fi AC_MSG_RESULT($with_threads) AC_SUBST(THREADOBJ) if test "$with_threads" = "no" then USE_THREAD_MODULE="#" elif test "$ac_cv_pthread_is_default" = yes then AC_DEFINE(WITH_THREAD) # Defining _REENTRANT on system with POSIX threads should not hurt. AC_DEFINE(_REENTRANT) posix_threads=yes THREADOBJ="Python/thread.o" elif test "$ac_cv_kpthread" = "yes" then CC="$CC -Kpthread" if test "$ac_cv_cxx_thread" = "yes"; then CXX="$CXX -Kpthread" fi AC_DEFINE(WITH_THREAD) posix_threads=yes THREADOBJ="Python/thread.o" elif test "$ac_cv_kthread" = "yes" then CC="$CC -Kthread" if test "$ac_cv_cxx_thread" = "yes"; then CXX="$CXX -Kthread" fi AC_DEFINE(WITH_THREAD) posix_threads=yes THREADOBJ="Python/thread.o" elif test "$ac_cv_pthread" = "yes" then CC="$CC -pthread" if test "$ac_cv_cxx_thread" = "yes"; then CXX="$CXX -pthread" fi AC_DEFINE(WITH_THREAD) posix_threads=yes THREADOBJ="Python/thread.o" else if test ! -z "$with_threads" -a -d "$with_threads" then LDFLAGS="$LDFLAGS -L$with_threads" fi if test ! -z "$withval" -a -d "$withval" then LDFLAGS="$LDFLAGS -L$withval" fi # According to the POSIX spec, a pthreads implementation must # define _POSIX_THREADS in unistd.h. Some apparently don't # (e.g. gnu pth with pthread emulation) AC_MSG_CHECKING(for _POSIX_THREADS in unistd.h) AC_EGREP_CPP(yes, [ #include #ifdef _POSIX_THREADS yes #endif ], unistd_defines_pthreads=yes, unistd_defines_pthreads=no) AC_MSG_RESULT($unistd_defines_pthreads) AC_DEFINE(_REENTRANT) AC_CHECK_HEADER(cthreads.h, [AC_DEFINE(WITH_THREAD) AC_DEFINE(C_THREADS) AC_DEFINE(HURD_C_THREADS, 1, [Define if you are using Mach cthreads directly under /include]) LIBS="$LIBS -lthreads" THREADOBJ="Python/thread.o"],[ AC_CHECK_HEADER(mach/cthreads.h, [AC_DEFINE(WITH_THREAD) AC_DEFINE(C_THREADS) AC_DEFINE(MACH_C_THREADS, 1, [Define if you are using Mach cthreads under mach /]) THREADOBJ="Python/thread.o"],[ AC_MSG_CHECKING(for --with-pth) AC_ARG_WITH([pth], AC_HELP_STRING(--with-pth, use GNU pth threading libraries), [AC_MSG_RESULT($withval) AC_DEFINE([WITH_THREAD]) AC_DEFINE([HAVE_PTH], 1, [Define if you have GNU PTH threads.]) LIBS="-lpth $LIBS" THREADOBJ="Python/thread.o"], [AC_MSG_RESULT(no) # Just looking for pthread_create in libpthread is not enough: # on HP/UX, pthread.h renames pthread_create to a different symbol name. # So we really have to include pthread.h, and then link. _libs=$LIBS LIBS="$LIBS -lpthread" AC_MSG_CHECKING([for pthread_create in -lpthread]) AC_TRY_LINK([#include void * start_routine (void *arg) { exit (0); }], [ pthread_create (NULL, NULL, start_routine, NULL)], [ AC_MSG_RESULT(yes) AC_DEFINE(WITH_THREAD) posix_threads=yes THREADOBJ="Python/thread.o"],[ LIBS=$_libs AC_CHECK_FUNC(pthread_detach, [AC_DEFINE(WITH_THREAD) posix_threads=yes THREADOBJ="Python/thread.o"],[ AC_CHECK_HEADER(atheos/threads.h, [AC_DEFINE(WITH_THREAD) AC_DEFINE(ATHEOS_THREADS, 1, [Define this if you have AtheOS threads.]) THREADOBJ="Python/thread.o"],[ AC_CHECK_LIB(pthreads, pthread_create, [AC_DEFINE(WITH_THREAD) posix_threads=yes LIBS="$LIBS -lpthreads" THREADOBJ="Python/thread.o"], [ AC_CHECK_LIB(c_r, pthread_create, [AC_DEFINE(WITH_THREAD) posix_threads=yes LIBS="$LIBS -lc_r" THREADOBJ="Python/thread.o"], [ AC_CHECK_LIB(pthread, __pthread_create_system, [AC_DEFINE(WITH_THREAD) posix_threads=yes LIBS="$LIBS -lpthread" THREADOBJ="Python/thread.o"], [ AC_CHECK_LIB(cma, pthread_create, [AC_DEFINE(WITH_THREAD) posix_threads=yes LIBS="$LIBS -lcma" THREADOBJ="Python/thread.o"],[ USE_THREAD_MODULE="#"]) ])])])])])])])])]) AC_CHECK_LIB(mpc, usconfig, [AC_DEFINE(WITH_THREAD) LIBS="$LIBS -lmpc" THREADOBJ="Python/thread.o" USE_THREAD_MODULE=""]) if test "$posix_threads" != "yes"; then AC_CHECK_LIB(thread, thr_create, [AC_DEFINE(WITH_THREAD) LIBS="$LIBS -lthread" THREADOBJ="Python/thread.o" USE_THREAD_MODULE=""]) fi if test "$USE_THREAD_MODULE" != "#" then # If the above checks didn't disable threads, (at least) OSF1 # needs this '-threads' argument during linking. case $ac_sys_system in OSF1) LDLAST=-threads;; esac fi fi if test "$posix_threads" = "yes"; then if test "$unistd_defines_pthreads" = "no"; then AC_DEFINE(_POSIX_THREADS, 1, [Define if you have POSIX threads, and your system does not define that.]) fi # Bug 662787: Using semaphores causes unexplicable hangs on Solaris 8. case $ac_sys_system/$ac_sys_release in SunOS/5.6) AC_DEFINE(HAVE_PTHREAD_DESTRUCTOR, 1, Defined for Solaris 2.6 bug in pthread header.) ;; SunOS/5.8) AC_DEFINE(HAVE_BROKEN_POSIX_SEMAPHORES, 1, Define if the Posix semaphores do not work on your system) ;; AIX/5) AC_DEFINE(HAVE_BROKEN_POSIX_SEMAPHORES, 1, Define if the Posix semaphores do not work on your system) ;; esac AC_MSG_CHECKING(if PTHREAD_SCOPE_SYSTEM is supported) AC_CACHE_VAL(ac_cv_pthread_system_supported, [AC_TRY_RUN([#include void *foo(void *parm) { return NULL; } main() { pthread_attr_t attr; pthread_t id; if (pthread_attr_init(&attr)) exit(-1); if (pthread_attr_setscope(&attr, PTHREAD_SCOPE_SYSTEM)) exit(-1); if (pthread_create(&id, &attr, foo, NULL)) exit(-1); exit(0); }], ac_cv_pthread_system_supported=yes, ac_cv_pthread_system_supported=no, ac_cv_pthread_system_supported=no) ]) AC_MSG_RESULT($ac_cv_pthread_system_supported) if test "$ac_cv_pthread_system_supported" = "yes"; then AC_DEFINE(PTHREAD_SYSTEM_SCHED_SUPPORTED, 1, [Defined if PTHREAD_SCOPE_SYSTEM supported.]) fi AC_CHECK_FUNCS(pthread_sigmask, [case $ac_sys_system in CYGWIN*) AC_DEFINE(HAVE_BROKEN_PTHREAD_SIGMASK, 1, [Define if pthread_sigmask() does not work on your system.]) ;; esac]) fi # Check for enable-ipv6 AH_TEMPLATE(ENABLE_IPV6, [Define if --enable-ipv6 is specified]) AC_MSG_CHECKING([if --enable-ipv6 is specified]) AC_ARG_ENABLE(ipv6, [ --enable-ipv6 Enable ipv6 (with ipv4) support --disable-ipv6 Disable ipv6 support], [ case "$enableval" in no) AC_MSG_RESULT(no) ipv6=no ;; *) AC_MSG_RESULT(yes) AC_DEFINE(ENABLE_IPV6) ipv6=yes ;; esac ], [ dnl the check does not work on cross compilation case... AC_TRY_RUN([ /* AF_INET6 available check */ #include #include main() { if (socket(AF_INET6, SOCK_STREAM, 0) < 0) exit(1); else exit(0); } ], AC_MSG_RESULT(yes) ipv6=yes, AC_MSG_RESULT(no) ipv6=no, AC_MSG_RESULT(no) ipv6=no ) if test "$ipv6" = "yes"; then AC_MSG_CHECKING(if RFC2553 API is available) AC_TRY_COMPILE([#include #include ], [struct sockaddr_in6 x; x.sin6_scope_id;], AC_MSG_RESULT(yes) ipv6=yes, AC_MSG_RESULT(no, IPv6 disabled) ipv6=no) fi if test "$ipv6" = "yes"; then AC_DEFINE(ENABLE_IPV6) fi ]) ipv6type=unknown ipv6lib=none ipv6trylibc=no if test "$ipv6" = "yes"; then AC_MSG_CHECKING([ipv6 stack type]) for i in inria kame linux-glibc linux-inet6 solaris toshiba v6d zeta; do case $i in inria) dnl http://www.kame.net/ AC_EGREP_CPP(yes, [ #include #ifdef IPV6_INRIA_VERSION yes #endif], [ipv6type=$i]) ;; kame) dnl http://www.kame.net/ AC_EGREP_CPP(yes, [ #include #ifdef __KAME__ yes #endif], [ipv6type=$i; ipv6lib=inet6 ipv6libdir=/usr/local/v6/lib ipv6trylibc=yes]) ;; linux-glibc) dnl http://www.v6.linux.or.jp/ AC_EGREP_CPP(yes, [ #include #if defined(__GLIBC__) && ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)) yes #endif], [ipv6type=$i; ipv6trylibc=yes]) ;; linux-inet6) dnl http://www.v6.linux.or.jp/ if test -d /usr/inet6; then ipv6type=$i ipv6lib=inet6 ipv6libdir=/usr/inet6/lib BASECFLAGS="-I/usr/inet6/include $BASECFLAGS" fi ;; solaris) if test -f /etc/netconfig; then if /usr/xpg4/bin/grep -q tcp6 /etc/netconfig; then ipv6type=$i ipv6trylibc=yes fi fi ;; toshiba) AC_EGREP_CPP(yes, [ #include #ifdef _TOSHIBA_INET6 yes #endif], [ipv6type=$i; ipv6lib=inet6; ipv6libdir=/usr/local/v6/lib]) ;; v6d) AC_EGREP_CPP(yes, [ #include #ifdef __V6D__ yes #endif], [ipv6type=$i; ipv6lib=v6; ipv6libdir=/usr/local/v6/lib; BASECFLAGS="-I/usr/local/v6/include $BASECFLAGS"]) ;; zeta) AC_EGREP_CPP(yes, [ #include #ifdef _ZETA_MINAMI_INET6 yes #endif], [ipv6type=$i; ipv6lib=inet6; ipv6libdir=/usr/local/v6/lib]) ;; esac if test "$ipv6type" != "unknown"; then break fi done AC_MSG_RESULT($ipv6type) fi if test "$ipv6" = "yes" -a "$ipv6lib" != "none"; then if test -d $ipv6libdir -a -f $ipv6libdir/lib$ipv6lib.a; then LIBS="-L$ipv6libdir -l$ipv6lib $LIBS" echo "using lib$ipv6lib" else if test $ipv6trylibc = "yes"; then echo "using libc" else echo 'Fatal: no $ipv6lib library found. cannot continue.' echo "You need to fetch lib$ipv6lib.a from appropriate" echo 'ipv6 kit and compile beforehand.' exit 1 fi fi fi # Check for --with-doc-strings AC_MSG_CHECKING(for --with-doc-strings) AC_ARG_WITH(doc-strings, AC_HELP_STRING(--with(out)-doc-strings, disable/enable documentation strings)) if test -z "$with_doc_strings" then with_doc_strings="yes" fi if test "$with_doc_strings" != "no" then AC_DEFINE(WITH_DOC_STRINGS, 1, [Define if you want documentation strings in extension modules]) fi AC_MSG_RESULT($with_doc_strings) # Check for Python-specific malloc support AC_MSG_CHECKING(for --with-tsc) AC_ARG_WITH(tsc, [ --with(out)-tsc enable/disable timestamp counter profile], [ if test "$withval" != no then AC_DEFINE(WITH_TSC, 1, [Define to profile with the Pentium timestamp counter]) AC_MSG_RESULT(yes) else AC_MSG_RESULT(no) fi], [AC_MSG_RESULT(no)]) # Check for Python-specific malloc support AC_MSG_CHECKING(for --with-pymalloc) AC_ARG_WITH(pymalloc, AC_HELP_STRING(--with(out)-pymalloc, disable/enable specialized mallocs)) if test -z "$with_pymalloc" then with_pymalloc="yes" fi if test "$with_pymalloc" != "no" then AC_DEFINE(WITH_PYMALLOC, 1, [Define if you want to compile in Python-specific mallocs]) fi AC_MSG_RESULT($with_pymalloc) # Check for --with-wctype-functions AC_MSG_CHECKING(for --with-wctype-functions) AC_ARG_WITH(wctype-functions, AC_HELP_STRING(--with-wctype-functions, use wctype.h functions), [ if test "$withval" != no then AC_DEFINE(WANT_WCTYPE_FUNCTIONS, 1, [Define if you want wctype.h functions to be used instead of the one supplied by Python itself. (see Include/unicodectype.h).]) AC_MSG_RESULT(yes) else AC_MSG_RESULT(no) fi], [AC_MSG_RESULT(no)]) # -I${DLINCLDIR} is added to the compile rule for importdl.o AC_SUBST(DLINCLDIR) DLINCLDIR=. # the dlopen() function means we might want to use dynload_shlib.o. some # platforms, such as AIX, have dlopen(), but don't want to use it. AC_CHECK_FUNCS(dlopen) # DYNLOADFILE specifies which dynload_*.o file we will use for dynamic # loading of modules. AC_SUBST(DYNLOADFILE) AC_MSG_CHECKING(DYNLOADFILE) if test -z "$DYNLOADFILE" then case $ac_sys_system/$ac_sys_release in AIX*) # Use dynload_shlib.c and dlopen() if we have it; otherwise dynload_aix.c if test "$ac_cv_func_dlopen" = yes then DYNLOADFILE="dynload_shlib.o" else DYNLOADFILE="dynload_aix.o" fi ;; hp*|HP*) DYNLOADFILE="dynload_hpux.o";; # Use dynload_next.c only on 10.2 and below, which don't have native dlopen() Darwin/@<:@0156@:>@\..*) DYNLOADFILE="dynload_next.o";; atheos*) DYNLOADFILE="dynload_atheos.o";; *) # use dynload_shlib.c and dlopen() if we have it; otherwise stub # out any dynamic loading if test "$ac_cv_func_dlopen" = yes then DYNLOADFILE="dynload_shlib.o" else DYNLOADFILE="dynload_stub.o" fi ;; esac fi AC_MSG_RESULT($DYNLOADFILE) if test "$DYNLOADFILE" != "dynload_stub.o" then AC_DEFINE(HAVE_DYNAMIC_LOADING, 1, [Defined when any dynamic module loading is enabled.]) fi # MACHDEP_OBJS can be set to platform-specific object files needed by Python AC_SUBST(MACHDEP_OBJS) AC_MSG_CHECKING(MACHDEP_OBJS) if test -z "$MACHDEP_OBJS" then MACHDEP_OBJS=$extra_machdep_objs else MACHDEP_OBJS="$MACHDEP_OBJS $extra_machdep_objs" fi AC_MSG_RESULT(MACHDEP_OBJS) # checks for library functions AC_CHECK_FUNCS(alarm bind_textdomain_codeset chown clock confstr \ ctermid execv fchmod fchown fork fpathconf ftime ftruncate \ gai_strerror getgroups getlogin getloadavg getpeername getpgid getpid \ getpriority getpwent getspnam getspent getsid getwd \ kill killpg lchmod lchown lstat mkfifo mknod mktime \ mremap nice pathconf pause plock poll pthread_init \ putenv readlink realpath \ select setegid seteuid setgid \ setlocale setregid setreuid setsid setpgid setpgrp setuid setvbuf snprintf \ sigaction siginterrupt sigrelse strftime strlcpy \ sysconf tcgetpgrp tcsetpgrp tempnam timegm times tmpfile tmpnam tmpnam_r \ truncate uname unsetenv utimes waitpid wait3 wait4 wcscoll wcsxfrm _getpty) # For some functions, having a definition is not sufficient, since # we want to take their address. AC_MSG_CHECKING(for chroot) AC_TRY_COMPILE([#include ], void *x=chroot, AC_DEFINE(HAVE_CHROOT, 1, Define if you have the 'chroot' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for link) AC_TRY_COMPILE([#include ], void *x=link, AC_DEFINE(HAVE_LINK, 1, Define if you have the 'link' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for symlink) AC_TRY_COMPILE([#include ], void *x=symlink, AC_DEFINE(HAVE_SYMLINK, 1, Define if you have the 'symlink' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for fchdir) AC_TRY_COMPILE([#include ], void *x=fchdir, AC_DEFINE(HAVE_FCHDIR, 1, Define if you have the 'fchdir' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for fsync) AC_TRY_COMPILE([#include ], void *x=fsync, AC_DEFINE(HAVE_FSYNC, 1, Define if you have the 'fsync' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for fdatasync) AC_TRY_COMPILE([#include ], void *x=fdatasync, AC_DEFINE(HAVE_FDATASYNC, 1, Define if you have the 'fdatasync' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for epoll) AC_TRY_COMPILE([#include ], void *x=epoll_create, AC_DEFINE(HAVE_EPOLL, 1, Define if you have the 'epoll' functions.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for kqueue) AC_TRY_COMPILE([ #include #include ], int x=kqueue(), AC_DEFINE(HAVE_KQUEUE, 1, Define if you have the 'kqueue' functions.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) # On some systems (eg. FreeBSD 5), we would find a definition of the # functions ctermid_r, setgroups in the library, but no prototype # (e.g. because we use _XOPEN_SOURCE). See whether we can take their # address to avoid compiler warnings and potential miscompilations # because of the missing prototypes. AC_MSG_CHECKING(for ctermid_r) AC_TRY_COMPILE([ #include "confdefs.h" #include ], void* p = ctermid_r, AC_DEFINE(HAVE_CTERMID_R, 1, Define if you have the 'ctermid_r' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for flock) AC_TRY_COMPILE([ #include "confdefs.h" #include ], void* p = flock, AC_DEFINE(HAVE_FLOCK, 1, Define if you have the 'flock' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for getpagesize) AC_TRY_COMPILE([ #include "confdefs.h" #include ], void* p = getpagesize, AC_DEFINE(HAVE_GETPAGESIZE, 1, Define if you have the 'getpagesize' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) dnl check for true AC_CHECK_PROGS(TRUE, true, /bin/true) dnl On some systems (e.g. Solaris 9), hstrerror and inet_aton are in -lresolv dnl On others, they are in the C library, so we to take no action AC_CHECK_LIB(c, inet_aton, [$ac_cv_prog_TRUE], AC_CHECK_LIB(resolv, inet_aton) ) # On Tru64, chflags seems to be present, but calling it will # exit Python AC_MSG_CHECKING(for chflags) AC_TRY_RUN([ #include #include int main(int argc, char*argv[]) { if(chflags(argv[0], 0) != 0) return 1; return 0; } ],AC_DEFINE(HAVE_CHFLAGS, 1, Define to 1 if you have the `chflags' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for lchflags) AC_TRY_RUN([ #include #include int main(int argc, char*argv[]) { if(lchflags(argv[0], 0) != 0) return 1; return 0; } ],AC_DEFINE(HAVE_LCHFLAGS, 1, Define to 1 if you have the `lchflags' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) dnl Check if system zlib has *Copy() functions dnl dnl On MacOSX the linker will search for dylibs on the entire linker path dnl before searching for static libraries. setup.py adds -Wl,-search_paths_first dnl to revert to a more traditional unix behaviour and make it possible to dnl override the system libz with a local static library of libz. Temporarily dnl add that flag to our CFLAGS as well to ensure that we check the version dnl of libz that will be used by setup.py. dnl The -L/usr/local/lib is needed as wel to get the same compilation dnl environment as setup.py (and leaving it out can cause configure to use the dnl wrong version of the library) case $ac_sys_system/$ac_sys_release in Darwin/*) _CUR_CFLAGS="${CFLAGS}" _CUR_LDFLAGS="${LDFLAGS}" CFLAGS="${CFLAGS} -Wl,-search_paths_first" LDFLAGS="${LDFLAGS} -Wl,-search_paths_first -L/usr/local/lib" ;; esac AC_CHECK_LIB(z, inflateCopy, AC_DEFINE(HAVE_ZLIB_COPY, 1, Define if the zlib library has inflateCopy)) case $ac_sys_system/$ac_sys_release in Darwin/*) CFLAGS="${_CUR_CFLAGS}" LDFLAGS="${_CUR_LDFLAGS}" ;; esac AC_MSG_CHECKING(for hstrerror) AC_TRY_LINK([ #include "confdefs.h" #include ], void* p = hstrerror; hstrerror(0), AC_DEFINE(HAVE_HSTRERROR, 1, Define if you have the 'hstrerror' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for inet_aton) AC_TRY_LINK([ #include "confdefs.h" #include #include #include #include ], void* p = inet_aton;inet_aton(0,0), AC_DEFINE(HAVE_INET_ATON, 1, Define if you have the 'inet_aton' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for inet_pton) AC_TRY_COMPILE([ #include "confdefs.h" #include #include #include #include ], void* p = inet_pton, AC_DEFINE(HAVE_INET_PTON, 1, Define if you have the 'inet_pton' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) # On some systems, setgroups is in unistd.h, on others, in grp.h AC_MSG_CHECKING(for setgroups) AC_TRY_COMPILE([ #include "confdefs.h" #include #ifdef HAVE_GRP_H #include #endif ], void* p = setgroups, AC_DEFINE(HAVE_SETGROUPS, 1, Define if you have the 'setgroups' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) # check for openpty and forkpty AC_CHECK_FUNCS(openpty,, AC_CHECK_LIB(util,openpty, [AC_DEFINE(HAVE_OPENPTY) LIBS="$LIBS -lutil"], AC_CHECK_LIB(bsd,openpty, [AC_DEFINE(HAVE_OPENPTY) LIBS="$LIBS -lbsd"]) ) ) AC_CHECK_FUNCS(forkpty,, AC_CHECK_LIB(util,forkpty, [AC_DEFINE(HAVE_FORKPTY) LIBS="$LIBS -lutil"], AC_CHECK_LIB(bsd,forkpty, [AC_DEFINE(HAVE_FORKPTY) LIBS="$LIBS -lbsd"]) ) ) # Stuff for expat. AC_CHECK_FUNCS(memmove) # check for long file support functions AC_CHECK_FUNCS(fseek64 fseeko fstatvfs ftell64 ftello statvfs) AC_REPLACE_FUNCS(dup2 getcwd strdup) AC_CHECK_FUNCS(getpgrp, AC_TRY_COMPILE([#include ], [getpgrp(0);], AC_DEFINE(GETPGRP_HAVE_ARG, 1, [Define if getpgrp() must be called as getpgrp(0).]) ) ) AC_CHECK_FUNCS(setpgrp, AC_TRY_COMPILE([#include ], [setpgrp(0,0);], AC_DEFINE(SETPGRP_HAVE_ARG, 1, [Define if setpgrp() must be called as setpgrp(0, 0).]) ) ) AC_CHECK_FUNCS(gettimeofday, AC_TRY_COMPILE([#include ], [gettimeofday((struct timeval*)0,(struct timezone*)0);], , AC_DEFINE(GETTIMEOFDAY_NO_TZ, 1, [Define if gettimeofday() does not have second (timezone) argument This is the case on Motorola V4 (R40V4.2)]) ) ) AC_MSG_CHECKING(for major, minor, and makedev) AC_TRY_LINK([ #if defined(MAJOR_IN_MKDEV) #include #elif defined(MAJOR_IN_SYSMACROS) #include #else #include #endif ],[ makedev(major(0),minor(0)); ],[ AC_DEFINE(HAVE_DEVICE_MACROS, 1, [Define to 1 if you have the device macros.]) AC_MSG_RESULT(yes) ],[ AC_MSG_RESULT(no) ]) # On OSF/1 V5.1, getaddrinfo is available, but a define # for [no]getaddrinfo in netdb.h. AC_MSG_CHECKING(for getaddrinfo) AC_TRY_LINK([ #include #include #include #include ],[ getaddrinfo(NULL, NULL, NULL, NULL); ], [ AC_MSG_RESULT(yes) AC_MSG_CHECKING(getaddrinfo bug) AC_TRY_RUN([ #include #include #include #include #include main() { int passive, gaierr, inet4 = 0, inet6 = 0; struct addrinfo hints, *ai, *aitop; char straddr[INET6_ADDRSTRLEN], strport[16]; for (passive = 0; passive <= 1; passive++) { memset(&hints, 0, sizeof(hints)); hints.ai_family = AF_UNSPEC; hints.ai_flags = passive ? AI_PASSIVE : 0; hints.ai_socktype = SOCK_STREAM; hints.ai_protocol = IPPROTO_TCP; if ((gaierr = getaddrinfo(NULL, "54321", &hints, &aitop)) != 0) { (void)gai_strerror(gaierr); goto bad; } for (ai = aitop; ai; ai = ai->ai_next) { if (ai->ai_addr == NULL || ai->ai_addrlen == 0 || getnameinfo(ai->ai_addr, ai->ai_addrlen, straddr, sizeof(straddr), strport, sizeof(strport), NI_NUMERICHOST|NI_NUMERICSERV) != 0) { goto bad; } switch (ai->ai_family) { case AF_INET: if (strcmp(strport, "54321") != 0) { goto bad; } if (passive) { if (strcmp(straddr, "0.0.0.0") != 0) { goto bad; } } else { if (strcmp(straddr, "127.0.0.1") != 0) { goto bad; } } inet4++; break; case AF_INET6: if (strcmp(strport, "54321") != 0) { goto bad; } if (passive) { if (strcmp(straddr, "::") != 0) { goto bad; } } else { if (strcmp(straddr, "::1") != 0) { goto bad; } } inet6++; break; case AF_UNSPEC: goto bad; break; default: /* another family support? */ break; } } } if (!(inet4 == 0 || inet4 == 2)) goto bad; if (!(inet6 == 0 || inet6 == 2)) goto bad; if (aitop) freeaddrinfo(aitop); exit(0); bad: if (aitop) freeaddrinfo(aitop); exit(1); } ], AC_MSG_RESULT(good) buggygetaddrinfo=no, AC_MSG_RESULT(buggy) buggygetaddrinfo=yes, AC_MSG_RESULT(buggy) buggygetaddrinfo=yes)], [ AC_MSG_RESULT(no) buggygetaddrinfo=yes ]) if test "$buggygetaddrinfo" = "yes"; then if test "$ipv6" = "yes"; then echo 'Fatal: You must get working getaddrinfo() function.' echo ' or you can specify "--disable-ipv6"'. exit 1 fi else AC_DEFINE(HAVE_GETADDRINFO, 1, [Define if you have the getaddrinfo function.]) fi AC_CHECK_FUNCS(getnameinfo) # checks for structures AC_HEADER_TIME AC_STRUCT_TM AC_STRUCT_TIMEZONE AC_CHECK_MEMBERS([struct stat.st_rdev]) AC_CHECK_MEMBERS([struct stat.st_blksize]) AC_CHECK_MEMBERS([struct stat.st_flags]) AC_CHECK_MEMBERS([struct stat.st_gen]) AC_CHECK_MEMBERS([struct stat.st_birthtime]) AC_STRUCT_ST_BLOCKS AC_MSG_CHECKING(for time.h that defines altzone) AC_CACHE_VAL(ac_cv_header_time_altzone, [AC_TRY_COMPILE([#include ], [return altzone;], ac_cv_header_time_altzone=yes, ac_cv_header_time_altzone=no)]) AC_MSG_RESULT($ac_cv_header_time_altzone) if test $ac_cv_header_time_altzone = yes; then AC_DEFINE(HAVE_ALTZONE, 1, [Define this if your time.h defines altzone.]) fi was_it_defined=no AC_MSG_CHECKING(whether sys/select.h and sys/time.h may both be included) AC_TRY_COMPILE([ #include #include #include ], [;], [ AC_DEFINE(SYS_SELECT_WITH_SYS_TIME, 1, [Define if you can safely include both and (which you can't on SCO ODT 3.0).]) was_it_defined=yes ]) AC_MSG_RESULT($was_it_defined) AC_MSG_CHECKING(for addrinfo) AC_CACHE_VAL(ac_cv_struct_addrinfo, AC_TRY_COMPILE([ # include ], [struct addrinfo a], ac_cv_struct_addrinfo=yes, ac_cv_struct_addrinfo=no)) AC_MSG_RESULT($ac_cv_struct_addrinfo) if test $ac_cv_struct_addrinfo = yes; then AC_DEFINE(HAVE_ADDRINFO, 1, [struct addrinfo (netdb.h)]) fi AC_MSG_CHECKING(for sockaddr_storage) AC_CACHE_VAL(ac_cv_struct_sockaddr_storage, AC_TRY_COMPILE([ # include # include ], [struct sockaddr_storage s], ac_cv_struct_sockaddr_storage=yes, ac_cv_struct_sockaddr_storage=no)) AC_MSG_RESULT($ac_cv_struct_sockaddr_storage) if test $ac_cv_struct_sockaddr_storage = yes; then AC_DEFINE(HAVE_SOCKADDR_STORAGE, 1, [struct sockaddr_storage (sys/socket.h)]) fi # checks for compiler characteristics AC_C_CHAR_UNSIGNED AC_C_CONST works=no AC_MSG_CHECKING(for working volatile) AC_TRY_COMPILE([],[volatile int x; x = 0;], works=yes, AC_DEFINE(volatile, [], [Define to empty if the keyword does not work.]) ) AC_MSG_RESULT($works) works=no AC_MSG_CHECKING(for working signed char) AC_TRY_COMPILE([], [signed char c;], works=yes, AC_DEFINE(signed, [], [Define to empty if the keyword does not work.]) ) AC_MSG_RESULT($works) have_prototypes=no AC_MSG_CHECKING(for prototypes) AC_TRY_COMPILE([int foo(int x) { return 0; }], [return foo(10);],[ AC_DEFINE(HAVE_PROTOTYPES, 1, [Define if your compiler supports function prototype]) have_prototypes=yes ]) AC_MSG_RESULT($have_prototypes) works=no AC_MSG_CHECKING(for variable length prototypes and stdarg.h) AC_TRY_COMPILE([ #include int foo(int x, ...) { va_list va; va_start(va, x); va_arg(va, int); va_arg(va, char *); va_arg(va, double); return 0; } ], [return foo(10, "", 3.14);], [ AC_DEFINE(HAVE_STDARG_PROTOTYPES, 1, [Define if your compiler supports variable length function prototypes (e.g. void fprintf(FILE *, char *, ...);) *and* ]) works=yes ]) AC_MSG_RESULT($works) # check for socketpair AC_MSG_CHECKING(for socketpair) AC_TRY_COMPILE([ #include #include ], void *x=socketpair, AC_DEFINE(HAVE_SOCKETPAIR, 1, Define if you have the 'socketpair' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) # check if sockaddr has sa_len member AC_MSG_CHECKING(if sockaddr has sa_len member) AC_TRY_COMPILE([#include #include ], [struct sockaddr x; x.sa_len = 0;], AC_MSG_RESULT(yes) AC_DEFINE(HAVE_SOCKADDR_SA_LEN, 1, [Define if sockaddr has sa_len member]), AC_MSG_RESULT(no)) va_list_is_array=no AC_MSG_CHECKING(whether va_list is an array) AC_TRY_COMPILE([ #ifdef HAVE_STDARG_PROTOTYPES #include #else #include #endif ], [va_list list1, list2; list1 = list2;], , [ AC_DEFINE(VA_LIST_IS_ARRAY, 1, [Define if a va_list is an array of some kind]) va_list_is_array=yes ]) AC_MSG_RESULT($va_list_is_array) # sigh -- gethostbyname_r is a mess; it can have 3, 5 or 6 arguments :-( AH_TEMPLATE(HAVE_GETHOSTBYNAME_R, [Define this if you have some version of gethostbyname_r()]) AC_CHECK_FUNC(gethostbyname_r, [ AC_DEFINE(HAVE_GETHOSTBYNAME_R) AC_MSG_CHECKING([gethostbyname_r with 6 args]) OLD_CFLAGS=$CFLAGS CFLAGS="$CFLAGS $MY_CPPFLAGS $MY_THREAD_CPPFLAGS $MY_CFLAGS" AC_TRY_COMPILE([ # include ], [ char *name; struct hostent *he, *res; char buffer[2048]; int buflen = 2048; int h_errnop; (void) gethostbyname_r(name, he, buffer, buflen, &res, &h_errnop) ], [ AC_DEFINE(HAVE_GETHOSTBYNAME_R) AC_DEFINE(HAVE_GETHOSTBYNAME_R_6_ARG, 1, [Define this if you have the 6-arg version of gethostbyname_r().]) AC_MSG_RESULT(yes) ], [ AC_MSG_RESULT(no) AC_MSG_CHECKING([gethostbyname_r with 5 args]) AC_TRY_COMPILE([ # include ], [ char *name; struct hostent *he; char buffer[2048]; int buflen = 2048; int h_errnop; (void) gethostbyname_r(name, he, buffer, buflen, &h_errnop) ], [ AC_DEFINE(HAVE_GETHOSTBYNAME_R) AC_DEFINE(HAVE_GETHOSTBYNAME_R_5_ARG, 1, [Define this if you have the 5-arg version of gethostbyname_r().]) AC_MSG_RESULT(yes) ], [ AC_MSG_RESULT(no) AC_MSG_CHECKING([gethostbyname_r with 3 args]) AC_TRY_COMPILE([ # include ], [ char *name; struct hostent *he; struct hostent_data data; (void) gethostbyname_r(name, he, &data); ], [ AC_DEFINE(HAVE_GETHOSTBYNAME_R) AC_DEFINE(HAVE_GETHOSTBYNAME_R_3_ARG, 1, [Define this if you have the 3-arg version of gethostbyname_r().]) AC_MSG_RESULT(yes) ], [ AC_MSG_RESULT(no) ]) ]) ]) CFLAGS=$OLD_CFLAGS ], [ AC_CHECK_FUNCS(gethostbyname) ]) AC_SUBST(HAVE_GETHOSTBYNAME_R_6_ARG) AC_SUBST(HAVE_GETHOSTBYNAME_R_5_ARG) AC_SUBST(HAVE_GETHOSTBYNAME_R_3_ARG) AC_SUBST(HAVE_GETHOSTBYNAME_R) AC_SUBST(HAVE_GETHOSTBYNAME) # checks for system services # (none yet) # Linux requires this for correct f.p. operations AC_CHECK_FUNC(__fpu_control, [], [AC_CHECK_LIB(ieee, __fpu_control) ]) # Check for --with-fpectl AC_MSG_CHECKING(for --with-fpectl) AC_ARG_WITH(fpectl, AC_HELP_STRING(--with-fpectl, enable SIGFPE catching), [ if test "$withval" != no then AC_DEFINE(WANT_SIGFPE_HANDLER, 1, [Define if you want SIGFPE handled (see Include/pyfpe.h).]) AC_MSG_RESULT(yes) else AC_MSG_RESULT(no) fi], [AC_MSG_RESULT(no)]) # check for --with-libm=... AC_SUBST(LIBM) case $ac_sys_system in Darwin) ;; *) LIBM=-lm esac AC_MSG_CHECKING(for --with-libm=STRING) AC_ARG_WITH(libm, AC_HELP_STRING(--with-libm=STRING, math library), [ if test "$withval" = no then LIBM= AC_MSG_RESULT(force LIBM empty) elif test "$withval" != yes then LIBM=$withval AC_MSG_RESULT(set LIBM="$withval") else AC_MSG_ERROR([proper usage is --with-libm=STRING]) fi], [AC_MSG_RESULT(default LIBM="$LIBM")]) # check for --with-libc=... AC_SUBST(LIBC) AC_MSG_CHECKING(for --with-libc=STRING) AC_ARG_WITH(libc, AC_HELP_STRING(--with-libc=STRING, C library), [ if test "$withval" = no then LIBC= AC_MSG_RESULT(force LIBC empty) elif test "$withval" != yes then LIBC=$withval AC_MSG_RESULT(set LIBC="$withval") else AC_MSG_ERROR([proper usage is --with-libc=STRING]) fi], [AC_MSG_RESULT(default LIBC="$LIBC")]) # ************************************ # * Check for mathematical functions * # ************************************ LIBS_SAVE=$LIBS LIBS="$LIBS $LIBM" AC_REPLACE_FUNCS(hypot) AC_CHECK_FUNCS(acosh asinh atanh copysign expm1 finite isinf isnan log1p) LIBS=$LIBS_SAVE # check for wchar.h AC_CHECK_HEADER(wchar.h, [ AC_DEFINE(HAVE_WCHAR_H, 1, [Define if the compiler provides a wchar.h header file.]) wchar_h="yes" ], wchar_h="no" ) # determine wchar_t size if test "$wchar_h" = yes then AC_CHECK_SIZEOF(wchar_t, 4, [#include ]) fi AC_MSG_CHECKING(for UCS-4 tcl) have_ucs4_tcl=no AC_TRY_COMPILE([ #include #if TCL_UTF_MAX != 6 # error "NOT UCS4_TCL" #endif], [], [ AC_DEFINE(HAVE_UCS4_TCL, 1, [Define this if you have tcl and TCL_UTF_MAX==6]) have_ucs4_tcl=yes ]) AC_MSG_RESULT($have_ucs4_tcl) # check whether wchar_t is signed or not if test "$wchar_h" = yes then # check whether wchar_t is signed or not AC_MSG_CHECKING(whether wchar_t is signed) AC_CACHE_VAL(ac_cv_wchar_t_signed, [ AC_TRY_RUN([ #include int main() { /* Success: exit code 0 */ exit((((wchar_t) -1) < ((wchar_t) 0)) ? 0 : 1); } ], ac_cv_wchar_t_signed=yes, ac_cv_wchar_t_signed=no, ac_cv_wchar_t_signed=yes)]) AC_MSG_RESULT($ac_cv_wchar_t_signed) fi AC_MSG_CHECKING(what type to use for str) AC_ARG_WITH(wide-unicode, AC_HELP_STRING(--with-wide-unicode, Use 4-byte Unicode characters (default is 2 bytes)), [ if test "$withval" != no then unicode_size="4" else unicode_size="2" fi ], [ case "$have_ucs4_tcl" in yes) unicode_size="4" ;; *) unicode_size="2" ;; esac ]) AH_TEMPLATE(Py_UNICODE_SIZE, [Define as the size of the unicode type.]) case "$unicode_size" in 4) AC_DEFINE(Py_UNICODE_SIZE, 4) ;; *) AC_DEFINE(Py_UNICODE_SIZE, 2) ;; esac AH_TEMPLATE(PY_UNICODE_TYPE, [Define as the integral type used for Unicode representation.]) # wchar_t is only usable if it maps to an unsigned type if test "$unicode_size" = "$ac_cv_sizeof_wchar_t" \ -a "$ac_cv_wchar_t_signed" = "no" then PY_UNICODE_TYPE="wchar_t" AC_DEFINE(HAVE_USABLE_WCHAR_T, 1, [Define if you have a useable wchar_t type defined in wchar.h; useable means wchar_t must be an unsigned type with at least 16 bits. (see Include/unicodeobject.h).]) AC_DEFINE(PY_UNICODE_TYPE,wchar_t) elif test "$ac_cv_sizeof_short" = "$unicode_size" then PY_UNICODE_TYPE="unsigned short" AC_DEFINE(PY_UNICODE_TYPE,unsigned short) elif test "$ac_cv_sizeof_long" = "$unicode_size" then PY_UNICODE_TYPE="unsigned long" AC_DEFINE(PY_UNICODE_TYPE,unsigned long) else PY_UNICODE_TYPE="no type found" fi AC_MSG_RESULT($PY_UNICODE_TYPE) # check for endianness AC_C_BIGENDIAN AH_VERBATIM([WORDS_BIGENDIAN], [ /* Define to 1 if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel and VAX). The block below does compile-time checking for endianness on platforms that use GCC and therefore allows compiling fat binaries on OSX by using '-arch ppc -arch i386' as the compile flags. The phrasing was choosen such that the configure-result is used on systems that don't use GCC. */ #ifdef __BIG_ENDIAN__ #define WORDS_BIGENDIAN 1 #else #ifndef __LITTLE_ENDIAN__ #undef WORDS_BIGENDIAN #endif #endif]) # Check whether right shifting a negative integer extends the sign bit # or fills with zeros (like the Cray J90, according to Tim Peters). AC_MSG_CHECKING(whether right shift extends the sign bit) AC_CACHE_VAL(ac_cv_rshift_extends_sign, [ AC_TRY_RUN([ int main() { exit(((-1)>>3 == -1) ? 0 : 1); } ], ac_cv_rshift_extends_sign=yes, ac_cv_rshift_extends_sign=no, ac_cv_rshift_extends_sign=yes)]) AC_MSG_RESULT($ac_cv_rshift_extends_sign) if test "$ac_cv_rshift_extends_sign" = no then AC_DEFINE(SIGNED_RIGHT_SHIFT_ZERO_FILLS, 1, [Define if i>>j for signed int i does not extend the sign bit when i < 0]) fi # check for getc_unlocked and related locking functions AC_MSG_CHECKING(for getc_unlocked() and friends) AC_CACHE_VAL(ac_cv_have_getc_unlocked, [ AC_TRY_LINK([#include ],[ FILE *f = fopen("/dev/null", "r"); flockfile(f); getc_unlocked(f); funlockfile(f); ], ac_cv_have_getc_unlocked=yes, ac_cv_have_getc_unlocked=no)]) AC_MSG_RESULT($ac_cv_have_getc_unlocked) if test "$ac_cv_have_getc_unlocked" = yes then AC_DEFINE(HAVE_GETC_UNLOCKED, 1, [Define this if you have flockfile(), getc_unlocked(), and funlockfile()]) fi # check where readline lives # save the value of LIBS so we don't actually link Python with readline LIBS_no_readline=$LIBS AC_CHECK_LIB(readline, readline) if test "$ac_cv_have_readline_readline" = no then AC_CHECK_LIB(termcap, readline) fi # check for readline 2.1 AC_CHECK_LIB(readline, rl_callback_handler_install, AC_DEFINE(HAVE_RL_CALLBACK, 1, [Define if you have readline 2.1]), , ) # check for readline 2.2 AC_TRY_CPP([#include ], have_readline=yes, have_readline=no) if test $have_readline = yes then AC_EGREP_HEADER([extern int rl_completion_append_character;], [readline/readline.h], AC_DEFINE(HAVE_RL_COMPLETION_APPEND_CHARACTER, 1, [Define if you have readline 2.2]), ) fi # check for readline 4.0 AC_CHECK_LIB(readline, rl_pre_input_hook, AC_DEFINE(HAVE_RL_PRE_INPUT_HOOK, 1, [Define if you have readline 4.0]), , ) # also in 4.0 AC_CHECK_LIB(readline, rl_completion_display_matches_hook, AC_DEFINE(HAVE_RL_COMPLETION_DISPLAY_MATCHES_HOOK, 1, [Define if you have readline 4.0]), , ) # check for readline 4.2 AC_CHECK_LIB(readline, rl_completion_matches, AC_DEFINE(HAVE_RL_COMPLETION_MATCHES, 1, [Define if you have readline 4.2]), , ) # also in readline 4.2 AC_TRY_CPP([#include ], have_readline=yes, have_readline=no) if test $have_readline = yes then AC_EGREP_HEADER([extern int rl_catch_signals;], [readline/readline.h], AC_DEFINE(HAVE_RL_CATCH_SIGNAL, 1, [Define if you can turn off readline's signal handling.]), ) fi # End of readline checks: restore LIBS LIBS=$LIBS_no_readline AC_MSG_CHECKING(for broken nice()) AC_CACHE_VAL(ac_cv_broken_nice, [ AC_TRY_RUN([ int main() { int val1 = nice(1); if (val1 != -1 && val1 == nice(2)) exit(0); exit(1); } ], ac_cv_broken_nice=yes, ac_cv_broken_nice=no, ac_cv_broken_nice=no)]) AC_MSG_RESULT($ac_cv_broken_nice) if test "$ac_cv_broken_nice" = yes then AC_DEFINE(HAVE_BROKEN_NICE, 1, [Define if nice() returns success/failure instead of the new priority.]) fi AC_MSG_CHECKING(for broken poll()) AC_TRY_RUN([ #include int main (void) { struct pollfd poll_struct = { 42, POLLIN|POLLPRI|POLLOUT, 0 }; close (42); int poll_test = poll (&poll_struct, 1, 0); if (poll_test < 0) { exit(0); } else if (poll_test == 0 && poll_struct.revents != POLLNVAL) { exit(0); } else { exit(1); } } ], ac_cv_broken_poll=yes, ac_cv_broken_poll=no, ac_cv_broken_poll=no) AC_MSG_RESULT($ac_cv_broken_poll) if test "$ac_cv_broken_poll" = yes then AC_DEFINE(HAVE_BROKEN_POLL, 1, [Define if poll() sets errno on invalid file descriptors.]) fi # Before we can test tzset, we need to check if struct tm has a tm_zone # (which is not required by ISO C or UNIX spec) and/or if we support # tzname[] AC_STRUCT_TIMEZONE # check tzset(3) exists and works like we expect it to AC_MSG_CHECKING(for working tzset()) AC_CACHE_VAL(ac_cv_working_tzset, [ AC_TRY_RUN([ #include #include #include #if HAVE_TZNAME extern char *tzname[]; #endif int main() { /* Note that we need to ensure that not only does tzset(3) do 'something' with localtime, but it works as documented in the library reference and as expected by the test suite. This includes making sure that tzname is set properly if tm->tm_zone does not exist since it is the alternative way of getting timezone info. Red Hat 6.2 doesn't understand the southern hemisphere after New Year's Day. */ time_t groundhogday = 1044144000; /* GMT-based */ time_t midyear = groundhogday + (365 * 24 * 3600 / 2); putenv("TZ=UTC+0"); tzset(); if (localtime(&groundhogday)->tm_hour != 0) exit(1); #if HAVE_TZNAME /* For UTC, tzname[1] is sometimes "", sometimes " " */ if (strcmp(tzname[0], "UTC") || (tzname[1][0] != 0 && tzname[1][0] != ' ')) exit(1); #endif putenv("TZ=EST+5EDT,M4.1.0,M10.5.0"); tzset(); if (localtime(&groundhogday)->tm_hour != 19) exit(1); #if HAVE_TZNAME if (strcmp(tzname[0], "EST") || strcmp(tzname[1], "EDT")) exit(1); #endif putenv("TZ=AEST-10AEDT-11,M10.5.0,M3.5.0"); tzset(); if (localtime(&groundhogday)->tm_hour != 11) exit(1); #if HAVE_TZNAME if (strcmp(tzname[0], "AEST") || strcmp(tzname[1], "AEDT")) exit(1); #endif #if HAVE_STRUCT_TM_TM_ZONE if (strcmp(localtime(&groundhogday)->tm_zone, "AEDT")) exit(1); if (strcmp(localtime(&midyear)->tm_zone, "AEST")) exit(1); #endif exit(0); } ], ac_cv_working_tzset=yes, ac_cv_working_tzset=no, ac_cv_working_tzset=no)]) AC_MSG_RESULT($ac_cv_working_tzset) if test "$ac_cv_working_tzset" = yes then AC_DEFINE(HAVE_WORKING_TZSET, 1, [Define if tzset() actually switches the local timezone in a meaningful way.]) fi # Look for subsecond timestamps in struct stat AC_MSG_CHECKING(for tv_nsec in struct stat) AC_CACHE_VAL(ac_cv_stat_tv_nsec, AC_TRY_COMPILE([#include ], [ struct stat st; st.st_mtim.tv_nsec = 1; ], ac_cv_stat_tv_nsec=yes, ac_cv_stat_tv_nsec=no, ac_cv_stat_tv_nsec=no)) AC_MSG_RESULT($ac_cv_stat_tv_nsec) if test "$ac_cv_stat_tv_nsec" = yes then AC_DEFINE(HAVE_STAT_TV_NSEC, 1, [Define if you have struct stat.st_mtim.tv_nsec]) fi # Look for BSD style subsecond timestamps in struct stat AC_MSG_CHECKING(for tv_nsec2 in struct stat) AC_CACHE_VAL(ac_cv_stat_tv_nsec2, AC_TRY_COMPILE([#include ], [ struct stat st; st.st_mtimespec.tv_nsec = 1; ], ac_cv_stat_tv_nsec2=yes, ac_cv_stat_tv_nsec2=no, ac_cv_stat_tv_nsec2=no)) AC_MSG_RESULT($ac_cv_stat_tv_nsec2) if test "$ac_cv_stat_tv_nsec2" = yes then AC_DEFINE(HAVE_STAT_TV_NSEC2, 1, [Define if you have struct stat.st_mtimensec]) fi # On HP/UX 11.0, mvwdelch is a block with a return statement AC_MSG_CHECKING(whether mvwdelch is an expression) AC_CACHE_VAL(ac_cv_mvwdelch_is_expression, AC_TRY_COMPILE([#include ], [ int rtn; rtn = mvwdelch(0,0,0); ], ac_cv_mvwdelch_is_expression=yes, ac_cv_mvwdelch_is_expression=no, ac_cv_mvwdelch_is_expression=yes)) AC_MSG_RESULT($ac_cv_mvwdelch_is_expression) if test "$ac_cv_mvwdelch_is_expression" = yes then AC_DEFINE(MVWDELCH_IS_EXPRESSION, 1, [Define if mvwdelch in curses.h is an expression.]) fi AC_MSG_CHECKING(whether WINDOW has _flags) AC_CACHE_VAL(ac_cv_window_has_flags, AC_TRY_COMPILE([#include ], [ WINDOW *w; w->_flags = 0; ], ac_cv_window_has_flags=yes, ac_cv_window_has_flags=no, ac_cv_window_has_flags=no)) AC_MSG_RESULT($ac_cv_window_has_flags) if test "$ac_cv_window_has_flags" = yes then AC_DEFINE(WINDOW_HAS_FLAGS, 1, [Define if WINDOW in curses.h offers a field _flags.]) fi AC_MSG_CHECKING(for is_term_resized) AC_TRY_COMPILE([#include ], void *x=is_term_resized, AC_DEFINE(HAVE_CURSES_IS_TERM_RESIZED, 1, Define if you have the 'is_term_resized' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for resize_term) AC_TRY_COMPILE([#include ], void *x=resize_term, AC_DEFINE(HAVE_CURSES_RESIZE_TERM, 1, Define if you have the 'resize_term' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for resizeterm) AC_TRY_COMPILE([#include ], void *x=resizeterm, AC_DEFINE(HAVE_CURSES_RESIZETERM, 1, Define if you have the 'resizeterm' function.) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) AC_MSG_CHECKING(for /dev/ptmx) if test -r /dev/ptmx then AC_MSG_RESULT(yes) AC_DEFINE(HAVE_DEV_PTMX, 1, [Define if we have /dev/ptmx.]) else AC_MSG_RESULT(no) fi AC_MSG_CHECKING(for /dev/ptc) if test -r /dev/ptc then AC_MSG_RESULT(yes) AC_DEFINE(HAVE_DEV_PTC, 1, [Define if we have /dev/ptc.]) else AC_MSG_RESULT(no) fi AC_MSG_CHECKING(for %zd printf() format support) AC_TRY_RUN([#include #include #include #ifdef HAVE_SYS_TYPES_H #include #endif #ifdef HAVE_SSIZE_T typedef ssize_t Py_ssize_t; #elif SIZEOF_VOID_P == SIZEOF_LONG typedef long Py_ssize_t; #else typedef int Py_ssize_t; #endif int main() { char buffer[256]; if(sprintf(buffer, "%zd", (size_t)123) < 0) return 1; if (strcmp(buffer, "123")) return 1; if (sprintf(buffer, "%zd", (Py_ssize_t)-123) < 0) return 1; if (strcmp(buffer, "-123")) return 1; return 0; }], [AC_MSG_RESULT(yes) AC_DEFINE(PY_FORMAT_SIZE_T, "z", [Define to printf format modifier for Py_ssize_t])], AC_MSG_RESULT(no)) AC_CHECK_TYPE(socklen_t,, AC_DEFINE(socklen_t,int, Define to `int' if does not define.),[ #ifdef HAVE_SYS_TYPES_H #include #endif #ifdef HAVE_SYS_SOCKET_H #include #endif ]) AC_SUBST(THREADHEADERS) for h in `(cd $srcdir;echo Python/thread_*.h)` do THREADHEADERS="$THREADHEADERS \$(srcdir)/$h" done AC_SUBST(SRCDIRS) SRCDIRS="Parser Grammar Objects Python Modules Mac" AC_MSG_CHECKING(for build directories) for dir in $SRCDIRS; do if test ! -d $dir; then mkdir $dir fi done AC_MSG_RESULT(done) # generate output files AC_CONFIG_FILES(Makefile.pre Modules/Setup.config) AC_OUTPUT echo "creating Modules/Setup" if test ! -f Modules/Setup then cp $srcdir/Modules/Setup.dist Modules/Setup fi echo "creating Modules/Setup.local" if test ! -f Modules/Setup.local then echo "# Edit this file for local setup changes" >Modules/Setup.local fi echo "creating Makefile" $SHELL $srcdir/Modules/makesetup -c $srcdir/Modules/config.c.in \ -s Modules Modules/Setup.config \ Modules/Setup.local Modules/Setup mv config.c Modules