path: root/Doc/reference/simple_stmts.rst

.. _simple:

*****************
Simple statements
*****************

.. index:: pair: simple; statement

A simple statement is comprised within a single logical line. Several simple
statements may occur on a single line separated by semicolons.  The syntax for
simple statements is:

.. productionlist::
   simple_stmt: `expression_stmt`
              : | `assert_stmt`
              : | `assignment_stmt`
              : | `augmented_assignment_stmt`
              : | `annotated_assignment_stmt`
              : | `pass_stmt`
              : | `del_stmt`
              : | `return_stmt`
              : | `yield_stmt`
              : | `raise_stmt`
              : | `break_stmt`
              : | `continue_stmt`
              : | `import_stmt`
              : | `future_stmt`
              : | `global_stmt`
              : | `nonlocal_stmt`


.. _exprstmts:

Expression statements
=====================

.. index::
   pair: expression; statement
   pair: expression; list
.. index:: pair: expression; list

Expression statements are used (mostly interactively) to compute and write a
value, or (usually) to call a procedure (a function that returns no meaningful
result; in Python, procedures return the value ``None``).  Other uses of
expression statements are allowed and occasionally useful.  The syntax for an
expression statement is:

.. productionlist::
   expression_stmt: `starred_expression`

An expression statement evaluates the expression list (which may be a single
expression).

.. index::
   builtin: repr
   object: None
   pair: string; conversion
   single: output
   pair: standard; output
   pair: writing; values
   pair: procedure; call

In interactive mode, if the value is not ``None``, it is converted to a string
using the built-in :func:`repr` function and the resulting string is written to
standard output on a line by itself (except if the result is ``None``, so that
procedure calls do not cause any output.)

.. _assignment:

Assignment statements
=====================

.. index::
   single: = (equals); assignment statement
   pair: assignment; statement
   pair: binding; name
   pair: rebinding; name
   object: mutable
   pair: attribute; assignment

Assignment statements are used to (re)bind names to values and to modify
attributes or items of mutable objects:

.. productionlist::
   assignment_stmt: (`target_list` "=")+ (`starred_expression` | `yield_expression`)
   target_list: `target` ("," `target`)* [","]
   target: `identifier`
         : | "(" [`target_list`] ")"
         : | "[" [`target_list`] "]"
         : | `attributeref`
         : | `subscription`
         : | `slicing`
         : | "*" `target`

(See section :ref:`primaries` for the syntax definitions for *attributeref*,
*subscription*, and *slicing*.)

An assignment statement evaluates the expression list (remember that this can be
a single expression or a comma-separated list, the latter yielding a tuple) and
assigns the single resulting object to each of the target lists, from left to
right.

.. index::
   single: target
   pair: target; list

Assignment is defined recursively depending on the form of the target (list).
When a target is part of a mutable object (an attribute reference, subscription
or slicing), the mutable object must ultimately perform the assignment and
decide about its validity, and may raise an exception if the assignment is
unacceptable.  The rules observed by various types and the exceptions raised are
given with the definition of the object types (see section :ref:`types`).

.. index:: triple: target; list; assignment
   single: , (comma); in target list
   single: * (asterisk); in assignment target list
   single: [] (square brackets); in assignment target list
   single: () (parentheses); in assignment target list

Assignment of an object to a target list, optionally enclosed in parentheses or
square brackets, is recursively defined as follows.

* If the target list is a single target with no trailing comma,
  optionally in parentheses, the object is assigned to that target.

* Else: The object must be an iterable with the same number of
  items as there are targets in the target list, and the items are assigned,
  from left to right, to the corresponding targets.

  * If the target list contains one target prefixed with an asterisk, called a
    "starred" target: The object must be an iterable with at least as many items
    as there are targets in the target list, minus one.  The first items of the
    iterable are assigned, from left to right, to the targets before the starred
    target.  The final items of the iterable are assigned to the targets after
    the starred target.  A list of the remaining items in the iterable is then
    assigned to the starred target (the list can be empty).

  * Else: The object must be an iterable with the same number of items as there
    are targets in the target list, and the items are assigned, from left to
    right, to the corresponding targets.

Assignment of an object to a single target is recursively defined as follows.

* If the target is an identifier (name):

  * If the name does not occur in a :keyword:`global` or :keyword:`nonlocal`
    statement in the current code block: the name is bound to the object in the
    current local namespace.

  * Otherwise: the name is bound to the object in the global namespace or the
    outer namespace determined by :keyword:`nonlocal`, respectively.

  .. index:: single: destructor

  The name is rebound if it was already bound.  This may cause the reference
  count for the object previously bound to the name to reach zero, causing the
  object to be deallocated and its destructor (if it has one) to be called.

  .. index:: pair: attribute; assignment

* If the target is an attribute reference: The primary expression in the
  reference is evaluated.  It should yield an object with assignable attributes;
  if this is not the case, :exc:`TypeError` is raised.  That object is then
  asked to assign the assigned object to the given attribute; if it cannot
  perform the assignment, it raises an exception (usually but not necessarily
  :exc:`AttributeError`).

  .. _attr-target-note:

  Note: If the object is a class instance and the attribute reference occurs on
  both sides of the assignment operator, the RHS expression, ``a.x`` can access
  either an instance attribute or (if no instance attribute exists) a class
  attribute.  The LHS target ``a.x`` is always set as an instance attribute,
  creating it if necessary.  Thus, the two occurrences of ``a.x`` do not
  necessarily refer to the same attribute: if the RHS expression refers to a
  class attribute, the LHS creates a new instance attribute as the target of the
  assignment::

     class Cls:
         x = 3             # class variable
     inst = Cls()
     inst.x = inst.x + 1   # writes inst.x as 4 leaving Cls.x as 3

  This description does not necessarily apply to descriptor attributes, such as
  properties created with :func:`property`.

  .. index::
     pair: subscription; assignment
     object: mutable

* If the target is a subscription: The primary expression in the reference is
  evaluated.  It should yield either a mutable sequence object (such as a list)
  or a mapping object (such as a dictionary).  Next, the subscript expression is
  evaluated.

  .. index::
     object: sequence
     object: list

  If the primary is a mutable sequence object (such as a list), the subscript
  must yield an integer.  If it is negative, the sequence's length is added to
  it.  The resulting value must be a nonnegative integer less than the
  sequence's length, and the sequence is asked to assign the assigned object to
  its item with that index.  If the index is out of range, :exc:`IndexError` is
  raised (assignment to a subscripted sequence cannot add new items to a list).

  .. index::
     object: mapping
     object: dictionary

  If the primary is a mapping object (such as a dictionary), the subscript must
  have a type compatible with the mapping's key type, and the mapping is then
  asked to create a key/datum pair which maps the subscript to the assigned
  object.  This can either replace an existing key/value pair with the same key
  value, or insert a new key/value pair (if no key with the same value existed).

  For user-defined objects, the :meth:`__setitem__` method is called with
  appropriate arguments.

  .. index:: pair: slicing; assignment

* If the target is a slicing: The primary expression in the reference is
  evaluated.  It should yield a mutable sequence object (such as a list).  The
  assigned object should be a sequence object of the same type.  Next, the lower
  and upper bound expressions are evaluated, insofar they are present; defaults
  are zero and the sequence's length.  The bounds should evaluate to integers.
  If either bound is negative, the sequence's length is added to it.  The
  resulting bounds are clipped to lie between zero and the sequence's length,
  inclusive.  Finally, the sequence object is asked to replace the slice with
  the items of the assigned sequence.  The length of the slice may be different
  from the length of the assigned sequence, thus changing the length of the
  target sequence, if the target sequence allows it.

.. impl-detail::

   In the current implementation, the syntax for targets is taken to be the same
   as for expressions, and invalid syntax is rejected during the code generation
   phase, causing less detailed error messages.

Although the definition of assignment implies that overlaps between the
left-hand side and the right-hand side are 'simultaneous' (for example ``a, b =
b, a`` swaps two variables), overlaps *within* the collection of assigned-to
variables occur left-to-right, sometimes resulting in confusion.  For instance,
the following program prints ``[0, 2]``::

   x = [0, 1]
   i = 0
   i, x[i] = 1, 2         # i is updated, then x[i] is updated
   print(x)


.. seealso::

   :pep:`3132` - Extended Iterable Unpacking
      The specification for the ``*target`` feature.


.. _augassign:

Augmented assignment statements
-------------------------------

.. index::
   pair: augmented; assignment
   single: statement; assignment, augmented
   single: +=; augmented assignment
   single: -=; augmented assignment
   single: *=; augmented assignment
   single: /=; augmented assignment
   single: %=; augmented assignment
   single: &=; augmented assignment
   single: ^=; augmented assignment
   single: |=; augmented assignment
   single: **=; augmented assignment
   single: //=; augmented assignment
   single: >>=; augmented assignment
   single: <<=; augmented assignment

Augmented assignment is the combination, in a single statement, of a binary
operation and an assignment statement:

.. productionlist::
   augmented_assignment_stmt: `augtarget` `augop` (`expression_list` | `yield_expression`)
   augtarget: `identifier` | `attributeref` | `subscription` | `slicing`
   augop: "+=" | "-=" | "*=" | "@=" | "/=" | "//=" | "%=" | "**="
        : | ">>=" | "<<=" | "&=" | "^=" | "|="

(See section :ref:`primaries` for the syntax definitions of the last three
symbols.)

An augmented assignment evaluates the target (which, unlike normal assignment
statements, cannot be an unpacking) and the expression list, performs the binary
operation specific to the type of assignment on the two operands, and assigns
the result to the original target.  The target is only evaluated once.

An augmented assignment expression like ``x += 1`` can be rewritten as ``x = x +
1`` to achieve a similar, but not exactly equal effect. In the augmented
version, ``x`` is only evaluated once. Also, when possible, the actual operation
is performed *in-place*, meaning that rather than creating a new object and
assigning that to the target, the old object is modified instead.

Unlike normal assignments, augmented assignments evaluate the left-hand side
*before* evaluating the right-hand side.  For example, ``a[i] += f(x)`` first
looks-up ``a[i]``, then it evaluates ``f(x)`` and performs the addition, and
lastly, it writes the result back to ``a[i]``.

With the exception of assigning to tuples and multiple targets in a single
statement, the assignment done by augmented assignment statements is handled the
same way as normal assignments. Similarly, with the exception of the possible
*in-place* behavior, the binary operation performed by augmented assignment is
the same as the normal binary operations.

For targets which are attribute references, the same :ref:`caveat about class
and instance attributes <attr-target-note>` applies as for regular assignments.


.. _annassign:

Annotated assignment statements
-------------------------------

.. index::
   pair: annotated; assignment
   single: statement; assignment, annotated
   single: : (colon); annotated variable

Annotation assignment is the combination, in a single statement,
of a variable or attribute annotation and an optional assignment statement:

.. productionlist::
   annotated_assignment_stmt: `augtarget` ":" `expression` ["=" `expression`]

The difference from normal :ref:`assignment` is that only single target and
only single right hand side value is allowed.

For simple names as assignment targets, if in class or module scope,
the annotations are evaluated and stored in a special class or module
attribute :attr:`__annotations__`
that is a dictionary mapping from variable names (mangled if private) to
evaluated annotations. This attribute is writable and is automatically
created at the start of class or module body execution, if annotations
are found statically.

For expressions as assignment targets, the annotations are evaluated if
in class or module scope, but not stored.

If a name is annotated in a function scope, then this name is local for
that scope. Annotations are never evaluated and stored in function scopes.

If the right hand side is present, an annotated
assignment performs the actual assignment before evaluating annotations
(where applicable). If the right hand side is not present for an expression
target, then the interpreter evaluates the target except for the last
:meth:`__setitem__` or :meth:`__setattr__` call.

.. seealso::

   :pep:`526` - Syntax for Variable Annotations
      The proposal that added syntax for annotating the types of variables
      (including class variables and instance variables), instead of expressing
      them through comments.

   :pep:`484` - Type hints
      The proposal that added the :mod:`typing` module to provide a standard
      syntax for type annotations that can be used in static analysis tools and
      IDEs.


.. _assert:

The :keyword:`assert` statement
===============================

.. index::
   statement: assert
   pair: debugging; assertions
   single: , (comma); expression list

Assert statements are a convenient way to insert debugging assertions into a
program:

.. productionlist::
   assert_stmt: "assert" `expression` ["," `expression`]

The simple form, ``assert expression``, is equivalent to ::

   if __debug__:
       if not expression: raise AssertionError

The extended form, ``assert expression1, expression2``, is equivalent to ::

   if __debug__:
       if not expression1: raise AssertionError(expression2)

.. index::
   single: __debug__
   exception: AssertionError

These equivalences assume that :const:`__debug__` and :exc:`AssertionError` refer to
the built-in variables with those names.  In the current implementation, the
built-in variable :const:`__debug__` is ``True`` under normal circumstances,
``False`` when optimization is requested (command line option :option:`-O`).  The current
code generator emits no code for an assert statement when optimization is
requested at compile time.  Note that it is unnecessary to include the source
code for the expression that failed in the error message; it will be displayed
as part of the stack trace.

Assignments to :const:`__debug__` are illegal.  The value for the built-in variable
is determined when the interpreter starts.


.. _pass:

The :keyword:`pass` statement
=============================

.. index::
   statement: pass
   pair: null; operation
           pair: null; operation

.. productionlist::
   pass_stmt: "pass"

:keyword:`pass` is a null operation --- when it is executed, nothing happens.
It is useful as a placeholder when a statement is required syntactically, but no
code needs to be executed, for example::

   def f(arg): pass    # a function that does nothing (yet)

   class C: pass       # a class with no methods (yet)


.. _del:

The :keyword:`del` statement
============================

.. index::
   statement: del
   pair: deletion; target
   triple: deletion; target; list

.. productionlist::
   del_stmt: "del" `target_list`

Deletion is recursively defined very similar to the way assignment is defined.
Rather than spelling it out in full details, here are some hints.

Deletion of a target list recursively deletes each target, from left to right.

.. index::
   statement: global
   pair: unbinding; name

Deletion of a name removes the binding of that name from the local or global
namespace, depending on whether the name occurs in a :keyword:`global` statement
in the same code block.  If the name is unbound, a :exc:`NameError` exception
will be raised.

.. index:: pair: attribute; deletion

Deletion of attribute references, subscriptions and slicings is passed to the
primary object involved; deletion of a slicing is in general equivalent to
assignment of an empty slice of the right type (but even this is determined by
the sliced object).

.. versionchanged:: 3.2
   Previously it was illegal to delete a name from the local namespace if it
   occurs as a free variable in a nested block.


.. _return:

The :keyword:`return` statement
===============================

.. index::
   statement: return
   pair: function; definition
   pair: class; definition

.. productionlist::
   return_stmt: "return" [`expression_list`]

:keyword:`return` may only occur syntactically nested in a function definition,
not within a nested class definition.

If an expression list is present, it is evaluated, else ``None`` is substituted.

:keyword:`return` leaves the current function call with the expression list (or
``None``) as return value.

.. index:: keyword: finally

When :keyword:`return` passes control out of a :keyword:`try` statement with a
:keyword:`finally` clause, that :keyword:`finally` clause is executed before
really leaving the function.

In a generator function, the :keyword:`return` statement indicates that the
generator is done and will cause :exc:`StopIteration` to be raised. The returned
value (if any) is used as an argument to construct :exc:`StopIteration` and
becomes the :attr:`StopIteration.value` attribute.

In an asynchronous generator function, an empty :keyword:`return` statement
indicates that the asynchronous generator is done and will cause
:exc:`StopAsyncIteration` to be raised.  A non-empty :keyword:`return`
statement is a syntax error in an asynchronous generator function.

.. _yield:

The :keyword:`yield` statement
==============================

.. index::
   statement: yield
   single: generator; function
   single: generator; iterator
   single: function; generator
   exception: StopIteration

.. productionlist::
   yield_stmt: `yield_expression`

A :keyword:`yield` statement is semantically equivalent to a :ref:`yield
expression <yieldexpr>`. The yield statement can be used to omit the parentheses
that would otherwise be required in the equivalent yield expression
statement. For example, the yield statements ::

  yield <expr>
  yield from <expr>

are equivalent to the yield expression statements ::

  (yield <expr>)
  (yield from <expr>)

Yield expressions and statements are only used when defining a :term:`generator`
function, and are only used in the body of the generator function.  Using yield
in a function definition is sufficient to cause that definition to create a
generator function instead of a normal function.

For full details of :keyword:`yield` semantics, refer to the
:ref:`yieldexpr` section.

.. _raise:

The :keyword:`raise` statement
==============================

.. index::
   statement: raise
   single: exception
   pair: raising; exception
   single: __traceback__ (exception attribute)

.. productionlist::
   raise_stmt: "raise" [`expression` ["from" `expression`]]

If no expressions are present, :keyword:`raise` re-raises the last exception
that was active in the current scope.  If no exception is active in the current
scope, a :exc:`RuntimeError` exception is raised indicating that this is an
error.

Otherwise, :keyword:`raise` evaluates the first expression as the exception
object.  It must be either a subclass or an instance of :class:`BaseException`.
If it is a class, the exception instance will be obtained when needed by
instantiating the class with no arguments.

The :dfn:`type` of the exception is the exception instance's class, the
:dfn:`value` is the instance itself.

.. index:: object: traceback

A traceback object is normally created automatically when an exception is raised
and attached to it as the :attr:`__traceback__` attribute, which is writable.
You can create an exception and set your own traceback in one step using the
:meth:`with_traceback` exception method (which returns the same exception
instance, with its traceback set to its argument), like so::

   raise Exception("foo occurred").with_traceback(tracebackobj)

.. index:: pair: exception; chaining
           __cause__ (exception attribute)
           __context__ (exception attribute)

The ``from`` clause is used for exception chaining: if given, the second
*expression* must be another exception class or instance, which will then be
attached to the raised exception as the :attr:`__cause__` attribute (which is
writable).  If the raised exception is not handled, both exceptions will be
printed::

   >>> try:
   ...     print(1 / 0)
   ... except Exception as exc:
   ...     raise RuntimeError("Something bad happened") from exc
   ...
   Traceback (most recent call last):
     File "<stdin>", line 2, in <module>
   ZeroDivisionError: division by zero

   The above exception was the direct cause of the following exception:

   Traceback (most recent call last):
     File "<stdin>", line 4, in <module>
   RuntimeError: Something bad happened

A similar mechanism works implicitly if an exception is raised inside an
exception handler or a :keyword:`finally` clause: the previous exception is then
attached as the new exception's :attr:`__context__` attribute::

   >>> try:
   ...     print(1 / 0)
   ... except:
   ...     raise RuntimeError("Something bad happened")
   ...
   Traceback (most recent call last):
     File "<stdin>", line 2, in <module>
   ZeroDivisionError: division by zero

   During handling of the above exception, another exception occurred:

   Traceback (most recent call last):
     File "<stdin>", line 4, in <module>
   RuntimeError: Something bad happened

Exception chaining can be explicitly suppressed by specifying :const:`None` in
the ``from`` clause::

   >>> try:
   ...     print(1 / 0)
   ... except:
   ...     raise RuntimeError("Something bad happened") from None
   ...
   Traceback (most recent call last):
     File "<stdin>", line 4, in <module>
   RuntimeError: Something bad happened

Additional information on exceptions can be found in section :ref:`exceptions`,
and information about handling exceptions is in section :ref:`try`.

.. versionchanged:: 3.3
    :const:`None` is now permitted as ``Y`` in ``raise X from Y``.

.. versionadded:: 3.3
    The ``__suppress_context__`` attribute to suppress automatic display of the
    exception context.

.. _break:

The :keyword:`break` statement
==============================

.. index::
   statement: break
   statement: for
   statement: while
   pair: loop; statement

.. productionlist::
   break_stmt: "break"

:keyword:`break` may only occur syntactically nested in a :keyword:`for` or
:keyword:`while` loop, but not nested in a function or class definition within
that loop.

.. index:: keyword: else
           pair: loop control; target

It terminates the nearest enclosing loop, skipping the optional :keyword:`else`
clause if the loop has one.

If a :keyword:`for` loop is terminated by :keyword:`break`, the loop control
target keeps its current value.

.. index:: keyword: finally

When :keyword:`break` passes control out of a :keyword:`try` statement with a
:keyword:`finally` clause, that :keyword:`finally` clause is executed before
really leaving the loop.


.. _continue:

The :keyword:`continue` statement
=================================

.. index::
   statement: continue
   statement: for
   statement: while
   pair: loop; statement
   keyword: finally

.. productionlist::
   continue_stmt: "continue"

:keyword:`continue` may only occur syntactically nested in a :keyword:`for` or
:keyword:`while` loop, but not nested in a function or class definition within
that loop.  It continues with the next cycle of the nearest enclosing loop.

When :keyword:`continue` passes control out of a :keyword:`try` statement with a
:keyword:`finally` clause, that :keyword:`finally` clause is executed before
really starting the next loop cycle.


.. _import:
.. _from:

The :keyword:`import` statement
===============================

.. index::
   statement: import
   single: module; importing
   pair: name; binding
   keyword: from
   keyword: as
   exception: ImportError
   single: , (comma); import statement

.. productionlist::
   import_stmt: "import" `module` ["as" `identifier`] ("," `module` ["as" `identifier`])*
              : | "from" `relative_module` "import" `identifier` ["as" `identifier`]
              : ("," `identifier` ["as" `identifier`])*
              : | "from" `relative_module` "import" "(" `identifier` ["as" `identifier`]
              : ("," `identifier` ["as" `identifier`])* [","] ")"
              : | "from" `module` "import" "*"
   module: (`identifier` ".")* `identifier`
   relative_module: "."* `module` | "."+

The basic import statement (no :keyword:`from` clause) is executed in two
steps:

#. find a module, loading and initializing it if necessary
#. define a name or names in the local namespace for the scope where
   the :keyword:`import` statement occurs.

When the statement contains multiple clauses (separated by
commas) the two steps are carried out separately for each clause, just
as though the clauses had been separated out into individual import
statements.

The details of the first step, finding and loading modules are described in
greater detail in the section on the :ref:`import system <importsystem>`,
which also describes the various types of packages and modules that can
be imported, as well as all the hooks that can be used to customize
the import system. Note that failures in this step may indicate either
that the module could not be located, *or* that an error occurred while
initializing the module, which includes execution of the module's code.

If the requested module is retrieved successfully, it will be made
available in the local namespace in one of three ways:

.. index:: single: as; import statement

* If the module name is followed by :keyword:`as`, then the name
  following :keyword:`as` is bound directly to the imported module.
* If no other name is specified, and the module being imported is a top
  level module, the module's name is bound in the local namespace as a
  reference to the imported module
* If the module being imported is *not* a top level module, then the name
  of the top level package that contains the module is bound in the local
  namespace as a reference to the top level package. The imported module
  must be accessed using its full qualified name rather than directly


.. index::
   pair: name; binding
   single: from; import statement

The :keyword:`from` form uses a slightly more complex process:

#. find the module specified in the :keyword:`from` clause, loading and
   initializing it if necessary;
#. for each of the identifiers specified in the :keyword:`import` clauses:

   #. check if the imported module has an attribute by that name
   #. if not, attempt to import a submodule with that name and then
      check the imported module again for that attribute
   #. if the attribute is not found, :exc:`ImportError` is raised.
   #. otherwise, a reference to that value is stored in the local namespace,
      using the name in the :keyword:`as` clause if it is present,
      otherwise using the attribute name

Examples::

   import foo                 # foo imported and bound locally
   import foo.bar.baz         # foo.bar.baz imported, foo bound locally
   import foo.bar.baz as fbb  # foo.bar.baz imported and bound as fbb
   from foo.bar import baz    # foo.bar.baz imported and bound as baz
   from foo import attr       # foo imported and foo.attr bound as attr

.. index:: single: * (asterisk); import statement

If the list of identifiers is replaced by a star (``'*'``), all public
names defined in the module are bound in the local namespace for the scope
where the :keyword:`import` statement occurs.

.. index:: single: __all__ (optional module attribute)

The *public names* defined by a module are determined by checking the module's
namespace for a variable named ``__all__``; if defined, it must be a sequence
of strings which are names defined or imported by that module.  The names
given in ``__all__`` are all considered public and are required to exist.  If
``__all__`` is not defined, the set of public names includes all names found
in the module's namespace which do not begin with an underscore character
(``'_'``).  ``__all__`` should contain the entire public API. It is intended
to avoid accidentally exporting items that are not part of the API (such as
library modules which were imported and used within the module).

The wild card form of import --- ``from module import *`` --- is only allowed at
the module level.  Attempting to use it in class or function definitions will
raise a :exc:`SyntaxError`.

.. index::
    single: relative; import

When specifying what module to import you do not have to specify the absolute
name of the module. When a module or package is contained within another
package it is possible to make a relative import within the same top package
without having to mention the package name. By using leading dots in the
specified module or package after :keyword:`from` you can specify how high to
traverse up the current package hierarchy without specifying exact names. One
leading dot means the current package where the module making the import
exists. Two dots means up one package level. Three dots is up two levels, etc.
So if you execute ``from . import mod`` from a module in the ``pkg`` package
then you will end up importing ``pkg.mod``. If you execute ``from ..subpkg2
import mod`` from within ``pkg.subpkg1`` you will import ``pkg.subpkg2.mod``.
The specification for relative imports is contained within :pep:`328`.

:func:`importlib.import_module` is provided to support applications that
determine dynamically the modules to be loaded.


.. _future:

Future statements
-----------------

.. index::
   pair: future; statement
   single: __future__; future statement

A :dfn:`future statement` is a directive to the compiler that a particular
module should be compiled using syntax or semantics that will be available in a
specified future release of Python where the feature becomes standard.

The future statement is intended to ease migration to future versions of Python
that introduce incompatible changes to the language.  It allows use of the new
features on a per-module basis before the release in which the feature becomes
standard.

.. productionlist:: *
   future_stmt: "from" "__future__" "import" `feature` ["as" `identifier`]
              : ("," `feature` ["as" `identifier`])*
              : | "from" "__future__" "import" "(" `feature` ["as" `identifier`]
              : ("," `feature` ["as" `identifier`])* [","] ")"
   feature: `identifier`

A future statement must appear near the top of the module.  The only lines that
can appear before a future statement are:

* the module docstring (if any),
* comments,
* blank lines, and
* other future statements.

The only feature in Python 3.7 that requires using the future statement is
``annotations``.

All historical features enabled by the future statement are still recognized
by Python 3.  The list includes ``absolute_import``, ``division``,
``generators``, ``generator_stop``, ``unicode_literals``,
``print_function``, ``nested_scopes`` and ``with_statement``.  They are
all redundant because they are always enabled, and only kept for
backwards compatibility.

A future statement is recognized and treated specially at compile time: Changes
to the semantics of core constructs are often implemented by generating
different code.  It may even be the case that a new feature introduces new
incompatible syntax (such as a new reserved word), in which case the compiler
may need to parse the module differently.  Such decisions cannot be pushed off
until runtime.

For any given release, the compiler knows which feature names have been defined,
and raises a compile-time error if a future statement contains a feature not
known to it.

The direct runtime semantics are the same as for any import statement: there is
a standard module :mod:`__future__`, described later, and it will be imported in
the usual way at the time the future statement is executed.

The interesting runtime semantics depend on the specific feature enabled by the
future statement.

Note that there is nothing special about the statement::

   import __future__ [as name]

That is not a future statement; it's an ordinary import statement with no
special semantics or syntax restrictions.

Code compiled by calls to the built-in functions :func:`exec` and :func:`compile`
that occur in a module :mod:`M` containing a future statement will, by default,
use the new syntax or semantics associated with the future statement.  This can
be controlled by optional arguments to :func:`compile` --- see the documentation
of that function for details.

A future statement typed at an interactive interpreter prompt will take effect
for the rest of the interpreter session.  If an interpreter is started with the
:option:`-i` option, is passed a script name to execute, and the script includes
a future statement, it will be in effect in the interactive session started
after the script is executed.

.. seealso::

   :pep:`236` - Back to the __future__
      The original proposal for the __future__ mechanism.


.. _global:

The :keyword:`global` statement
===============================

.. index::
   statement: global
   triple: global; name; binding
   single: , (comma); identifier list

.. productionlist::
   global_stmt: "global" `identifier` ("," `identifier`)*

The :keyword:`global` statement is a declaration which holds for the entire
current code block.  It means that the listed identifiers are to be interpreted
as globals.  It would be impossible to assign to a global variable without
:keyword:`global`, although free variables may refer to globals without being
declared global.

Names listed in a :keyword:`global` statement must not be used in the same code
block textually preceding that :keyword:`global` statement.

Names listed in a :keyword:`global` statement must not be defined as formal
parameters or in a :keyword:`for` loop control target, :keyword:`class`
definition, function definition, :keyword:`import` statement, or variable
annotation.

.. impl-detail::

   The current implementation does not enforce some of these restrictions, but
   programs should not abuse this freedom, as future implementations may enforce
   them or silently change the meaning of the program.

.. index::
   builtin: exec
   builtin: eval
   builtin: compile

**Programmer's note:** :keyword:`global` is a directive to the parser.  It
applies only to code parsed at the same time as the :keyword:`global` statement.
In particular, a :keyword:`global` statement contained in a string or code
object supplied to the built-in :func:`exec` function does not affect the code
block *containing* the function call, and code contained in such a string is
unaffected by :keyword:`global` statements in the code containing the function
call.  The same applies to the :func:`eval` and :func:`compile` functions.


.. _nonlocal:

The :keyword:`nonlocal` statement
=================================

.. index:: statement: nonlocal
   single: , (comma); identifier list

.. productionlist::
   nonlocal_stmt: "nonlocal" `identifier` ("," `identifier`)*

.. XXX add when implemented
                : ["=" (`target_list` "=")+ starred_expression]
                : | "nonlocal" identifier augop expression_list

The :keyword:`nonlocal` statement causes the listed identifiers to refer to
previously bound variables in the nearest enclosing scope excluding globals.
This is important because the default behavior for binding is to search the
local namespace first.  The statement allows encapsulated code to rebind
variables outside of the local scope besides the global (module) scope.

.. XXX not implemented
   The :keyword:`nonlocal` statement may prepend an assignment or augmented
   assignment, but not an expression.

Names listed in a :keyword:`nonlocal` statement, unlike those listed in a
:keyword:`global` statement, must refer to pre-existing bindings in an
enclosing scope (the scope in which a new binding should be created cannot
be determined unambiguously).

Names listed in a :keyword:`nonlocal` statement must not collide with
pre-existing bindings in the local scope.

.. seealso::

   :pep:`3104` - Access to Names in Outer Scopes
      The specification for the :keyword:`nonlocal` statement.