path: root/Lib/ntpath.py

# Module 'ntpath' -- common operations on WinNT/Win95 pathnames
"""Common pathname manipulations, WindowsNT/95 version.

Instead of importing this module directly, import os and refer to this
module as os.path.
"""

import os
import stat

__all__ = ["normcase","isabs","join","splitdrive","split","splitext",
           "basename","dirname","commonprefix","getsize","getmtime",
           "getatime","islink","exists","isdir","isfile","ismount",
           "walk","expanduser","expandvars","normpath","abspath","splitunc"]

# Normalize the case of a pathname and map slashes to backslashes.
# Other normalizations (such as optimizing '../' away) are not done
# (this is done by normpath).

def normcase(s):
    """Normalize case of pathname.

    Makes all characters lowercase and all slashes into backslashes."""
    return s.replace("/", "\\").lower()


# Return whether a path is absolute.
# Trivial in Posix, harder on the Mac or MS-DOS.
# For DOS it is absolute if it starts with a slash or backslash (current
# volume), or if a pathname after the volume letter and colon / UNC resource
# starts with a slash or backslash.

def isabs(s):
    """Test whether a path is absolute"""
    s = splitdrive(s)[1]
    return s != '' and s[:1] in '/\\'


# Join two (or more) paths.

def join(a, *p):
    """Join two or more pathname components, inserting "\\" as needed"""
    path = a
    for b in p:
        b_wins = 0  # set to 1 iff b makes path irrelevant
        if path == "":
            b_wins = 1

        elif isabs(b):
            # This probably wipes out path so far.  However, it's more
            # complicated if path begins with a drive letter:
            #     1. join('c:', '/a') == 'c:/a'
            #     2. join('c:/', '/a') == 'c:/a'
            # But
            #     3. join('c:/a', '/b') == '/b'
            #     4. join('c:', 'd:/') = 'd:/'
            #     5. join('c:/', 'd:/') = 'd:/'
            if path[1:2] != ":" or b[1:2] == ":":
                # Path doesn't start with a drive letter, or cases 4 and 5.
                b_wins = 1

            # Else path has a drive letter, and b doesn't but is absolute.
            elif len(path) > 3 or (len(path) == 3 and
                                   path[-1] not in "/\\"):
                # case 3
                b_wins = 1

        if b_wins:
            path = b
        else:
            # Join, and ensure there's a separator.
            assert len(path) > 0
            if path[-1] in "/\\":
                if b and b[0] in "/\\":
                    path += b[1:]
                else:
                    path += b
            elif path[-1] == ":":
                path += b
            elif b:
                if b[0] in "/\\":
                    path += b
                else:
                    path += "\\" + b

    return path


# Split a path in a drive specification (a drive letter followed by a
# colon) and the path specification.
# It is always true that drivespec + pathspec == p
def splitdrive(p):
    """Split a pathname into drive and path specifiers. Returns a 2-tuple
"(drive,path)";  either part may be empty"""
    if p[1:2] == ':':
        return p[0:2], p[2:]
    return '', p


# Parse UNC paths
def splitunc(p):
    """Split a pathname into UNC mount point and relative path specifiers.

    Return a 2-tuple (unc, rest); either part may be empty.
    If unc is not empty, it has the form '//host/mount' (or similar
    using backslashes).  unc+rest is always the input path.
    Paths containing drive letters never have an UNC part.
    """
    if p[1:2] == ':':
        return '', p # Drive letter present
    firstTwo = p[0:2]
    if firstTwo == '//' or firstTwo == '\\\\':
        # is a UNC path:
        # vvvvvvvvvvvvvvvvvvvv equivalent to drive letter
        # \\machine\mountpoint\directories...
        #           directory ^^^^^^^^^^^^^^^
        normp = normcase(p)
        index = normp.find('\\', 2)
        if index == -1:
            ##raise RuntimeError, 'illegal UNC path: "' + p + '"'
            return ("", p)
        index = normp.find('\\', index + 1)
        if index == -1:
            index = len(p)
        return p[:index], p[index:]
    return '', p


# Split a path in head (everything up to the last '/') and tail (the
# rest).  After the trailing '/' is stripped, the invariant
# join(head, tail) == p holds.
# The resulting head won't end in '/' unless it is the root.

def split(p):
    """Split a pathname.

    Return tuple (head, tail) where tail is everything after the final slash.
    Either part may be empty."""

    d, p = splitdrive(p)
    # set i to index beyond p's last slash
    i = len(p)
    while i and p[i-1] not in '/\\':
        i = i - 1
    head, tail = p[:i], p[i:]  # now tail has no slashes
    # remove trailing slashes from head, unless it's all slashes
    head2 = head
    while head2 and head2[-1] in '/\\':
        head2 = head2[:-1]
    head = head2 or head
    return d + head, tail


# Split a path in root and extension.
# The extension is everything starting at the last dot in the last
# pathname component; the root is everything before that.
# It is always true that root + ext == p.

def splitext(p):
    """Split the extension from a pathname.

    Extension is everything from the last dot to the end.
    Return (root, ext), either part may be empty."""
    root, ext = '', ''
    for c in p:
        if c in ['/','\\']:
            root, ext = root + ext + c, ''
        elif c == '.':
            if ext:
                root, ext = root + ext, c
            else:
                ext = c
        elif ext:
            ext = ext + c
        else:
            root = root + c
    return root, ext


# Return the tail (basename) part of a path.

def basename(p):
    """Returns the final component of a pathname"""
    return split(p)[1]


# Return the head (dirname) part of a path.

def dirname(p):
    """Returns the directory component of a pathname"""
    return split(p)[0]


# Return the longest prefix of all list elements.

def commonprefix(m):
    "Given a list of pathnames, returns the longest common leading component"
    if not m: return ''
    prefix = m[0]
    for item in m:
        for i in range(len(prefix)):
            if prefix[:i+1] != item[:i+1]:
                prefix = prefix[:i]
                if i == 0: return ''
                break
    return prefix


# Get size, mtime, atime of files.

def getsize(filename):
    """Return the size of a file, reported by os.stat()"""
    st = os.stat(filename)
    return st[stat.ST_SIZE]

def getmtime(filename):
    """Return the last modification time of a file, reported by os.stat()"""
    st = os.stat(filename)
    return st[stat.ST_MTIME]

def getatime(filename):
    """Return the last access time of a file, reported by os.stat()"""
    st = os.stat(filename)
    return st[stat.ST_ATIME]


# Is a path a symbolic link?
# This will always return false on systems where posix.lstat doesn't exist.

def islink(path):
    """Test for symbolic link.  On WindowsNT/95 always returns false"""
    return 0


# Does a path exist?
# This is false for dangling symbolic links.

def exists(path):
    """Test whether a path exists"""
    try:
        st = os.stat(path)
    except os.error:
        return 0
    return 1


# Is a path a dos directory?
# This follows symbolic links, so both islink() and isdir() can be true
# for the same path.

def isdir(path):
    """Test whether a path is a directory"""
    try:
        st = os.stat(path)
    except os.error:
        return 0
    return stat.S_ISDIR(st[stat.ST_MODE])


# Is a path a regular file?
# This follows symbolic links, so both islink() and isdir() can be true
# for the same path.

def isfile(path):
    """Test whether a path is a regular file"""
    try:
        st = os.stat(path)
    except os.error:
        return 0
    return stat.S_ISREG(st[stat.ST_MODE])


# Is a path a mount point?  Either a root (with or without drive letter)
# or an UNC path with at most a / or \ after the mount point.

def ismount(path):
    """Test whether a path is a mount point (defined as root of drive)"""
    unc, rest = splitunc(path)
    if unc:
        return rest in ("", "/", "\\")
    p = splitdrive(path)[1]
    return len(p) == 1 and p[0] in '/\\'


# Directory tree walk.
# For each directory under top (including top itself, but excluding
# '.' and '..'), func(arg, dirname, filenames) is called, where
# dirname is the name of the directory and filenames is the list
# files files (and subdirectories etc.) in the directory.
# The func may modify the filenames list, to implement a filter,
# or to impose a different order of visiting.

def walk(top, func, arg):
    """Directory tree walk whth callback function.

    walk(top, func, arg) calls func(arg, d, files) for each directory d
    in the tree rooted at top (including top itself); files is a list
    of all the files and subdirs in directory d."""
    try:
        names = os.listdir(top)
    except os.error:
        return
    func(arg, top, names)
    exceptions = ('.', '..')
    for name in names:
        if name not in exceptions:
            name = join(top, name)
            if isdir(name):
                walk(name, func, arg)


# Expand paths beginning with '~' or '~user'.
# '~' means $HOME; '~user' means that user's home directory.
# If the path doesn't begin with '~', or if the user or $HOME is unknown,
# the path is returned unchanged (leaving error reporting to whatever
# function is called with the expanded path as argument).
# See also module 'glob' for expansion of *, ? and [...] in pathnames.
# (A function should also be defined to do full *sh-style environment
# variable expansion.)

def expanduser(path):
    """Expand ~ and ~user constructs.

    If user or $HOME is unknown, do nothing."""
    if path[:1] != '~':
        return path
    i, n = 1, len(path)
    while i < n and path[i] not in '/\\':
        i = i + 1
    if i == 1:
        if os.environ.has_key('HOME'):
            userhome = os.environ['HOME']
        elif not os.environ.has_key('HOMEPATH'):
            return path
        else:
            try:
                drive = os.environ['HOMEDRIVE']
            except KeyError:
                drive = ''
            userhome = join(drive, os.environ['HOMEPATH'])
    else:
        return path
    return userhome + path[i:]


# Expand paths containing shell variable substitutions.
# The following rules apply:
#       - no expansion within single quotes
#       - no escape character, except for '$$' which is translated into '$'
#       - ${varname} is accepted.
#       - varnames can be made out of letters, digits and the character '_'
# XXX With COMMAND.COM you can use any characters in a variable name,
# XXX except '^|<>='.

def expandvars(path):
    """Expand shell variables of form $var and ${var}.

    Unknown variables are left unchanged."""
    if '$' not in path:
        return path
    import string
    varchars = string.ascii_letters + string.digits + '_-'
    res = ''
    index = 0
    pathlen = len(path)
    while index < pathlen:
        c = path[index]
        if c == '\'':   # no expansion within single quotes
            path = path[index + 1:]
            pathlen = len(path)
            try:
                index = path.index('\'')
                res = res + '\'' + path[:index + 1]
            except ValueError:
                res = res + path
                index = pathlen - 1
        elif c == '$':  # variable or '$$'
            if path[index + 1:index + 2] == '$':
                res = res + c
                index = index + 1
            elif path[index + 1:index + 2] == '{':
                path = path[index+2:]
                pathlen = len(path)
                try:
                    index = path.index('}')
                    var = path[:index]
                    if os.environ.has_key(var):
                        res = res + os.environ[var]
                except ValueError:
                    res = res + path
                    index = pathlen - 1
            else:
                var = ''
                index = index + 1
                c = path[index:index + 1]
                while c != '' and c in varchars:
                    var = var + c
                    index = index + 1
                    c = path[index:index + 1]
                if os.environ.has_key(var):
                    res = res + os.environ[var]
                if c != '':
                    res = res + c
        else:
            res = res + c
        index = index + 1
    return res


# Normalize a path, e.g. A//B, A/./B and A/foo/../B all become A\B.
# Previously, this function also truncated pathnames to 8+3 format,
# but as this module is called "ntpath", that's obviously wrong!

def normpath(path):
    """Normalize path, eliminating double slashes, etc."""
    path = path.replace("/", "\\")
    prefix, path = splitdrive(path)
    while path[:1] == "\\":
        prefix = prefix + "\\"
        path = path[1:]
    comps = path.split("\\")
    i = 0
    while i < len(comps):
        if comps[i] in ('.', ''):
            del comps[i]
        elif comps[i] == '..':
            if i > 0 and comps[i-1] != '..':
                del comps[i-1:i+1]
                i -= 1
            elif i == 0 and prefix.endswith("\\"):
                del comps[i]
            else:
                i += 1
        else:
            i += 1
    # If the path is now empty, substitute '.'
    if not prefix and not comps:
        comps.append('.')
    return prefix + "\\".join(comps)


# Return an absolute path.
def abspath(path):
    """Return the absolute version of a path"""
    if path: # Empty path must return current working directory.
        from nt import _getfullpathname
        try:
            path = _getfullpathname(path)
        except WindowsError:
            pass # Bad path - return unchanged.
    else:
        path = os.getcwd()
    return normpath(path)

# realpath is a no-op on systems without islink support
realpath = abspath