path: root/Modules/zlibmodule.c

/* zlibmodule.c -- gzip-compatible data compression */
/* See http://www.gzip.org/zlib/ */

/* Windows users:  read Python's PCbuild\readme.txt */


#include "Python.h"
#include "structmember.h"
#include "zlib.h"

#ifdef WITH_THREAD
    #include "pythread.h"
    #define ENTER_ZLIB(obj) \
        Py_BEGIN_ALLOW_THREADS; \
        PyThread_acquire_lock((obj)->lock, 1); \
        Py_END_ALLOW_THREADS;
    #define LEAVE_ZLIB(obj) PyThread_release_lock((obj)->lock);
#else
    #define ENTER_ZLIB(obj)
    #define LEAVE_ZLIB(obj)
#endif

/* The following parameters are copied from zutil.h, version 0.95 */
#define DEFLATED   8
#if MAX_MEM_LEVEL >= 8
#  define DEF_MEM_LEVEL 8
#else
#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
#endif
#define DEF_WBITS MAX_WBITS

/* The output buffer will be increased in chunks of DEFAULTALLOC bytes. */
#define DEFAULTALLOC (16*1024)

static PyTypeObject Comptype;
static PyTypeObject Decomptype;

static PyObject *ZlibError;

typedef struct
{
    PyObject_HEAD
    z_stream zst;
    PyObject *unused_data;
    PyObject *unconsumed_tail;
    char eof;
    int is_initialised;
    #ifdef WITH_THREAD
        PyThread_type_lock lock;
    #endif
} compobject;

static void
zlib_error(z_stream zst, int err, char *msg)
{
    const char *zmsg = zst.msg;
    if (zmsg == Z_NULL) {
        switch (err) {
        case Z_BUF_ERROR:
            zmsg = "incomplete or truncated stream";
            break;
        case Z_STREAM_ERROR:
            zmsg = "inconsistent stream state";
            break;
        case Z_DATA_ERROR:
            zmsg = "invalid input data";
            break;
        }
    }
    if (zmsg == Z_NULL)
        PyErr_Format(ZlibError, "Error %d %s", err, msg);
    else
        PyErr_Format(ZlibError, "Error %d %s: %.200s", err, msg, zmsg);
}

PyDoc_STRVAR(compressobj__doc__,
"compressobj([level]) -- Return a compressor object.\n"
"\n"
"Optional arg level is the compression level, in 1-9.");

PyDoc_STRVAR(decompressobj__doc__,
"decompressobj([wbits]) -- Return a decompressor object.\n"
"\n"
"Optional arg wbits is the window buffer size.");

static compobject *
newcompobject(PyTypeObject *type)
{
    compobject *self;
    self = PyObject_New(compobject, type);
    if (self == NULL)
        return NULL;
    self->eof = 0;
    self->is_initialised = 0;
    self->unused_data = PyBytes_FromStringAndSize("", 0);
    if (self->unused_data == NULL) {
        Py_DECREF(self);
        return NULL;
    }
    self->unconsumed_tail = PyBytes_FromStringAndSize("", 0);
    if (self->unconsumed_tail == NULL) {
        Py_DECREF(self);
        return NULL;
    }
#ifdef WITH_THREAD
    self->lock = PyThread_allocate_lock();
#endif
    return self;
}

PyDoc_STRVAR(compress__doc__,
"compress(string[, level]) -- Returned compressed string.\n"
"\n"
"Optional arg level is the compression level, in 1-9.");

static PyObject *
PyZlib_compress(PyObject *self, PyObject *args)
{
    PyObject *ReturnVal = NULL;
    Py_buffer pinput;
    Byte *input, *output = NULL;
    unsigned int length;
    int level=Z_DEFAULT_COMPRESSION, err;
    z_stream zst;

    /* require Python string object, optional 'level' arg */
    if (!PyArg_ParseTuple(args, "y*|i:compress", &pinput, &level))
        return NULL;

    if (pinput.len > UINT_MAX) {
        PyErr_SetString(PyExc_OverflowError,
                        "Size does not fit in an unsigned int");
        goto error;
    }
    input = pinput.buf;
    length = pinput.len;

    zst.avail_out = length + length/1000 + 12 + 1;

    output = (Byte*)malloc(zst.avail_out);
    if (output == NULL) {
        PyErr_SetString(PyExc_MemoryError,
                        "Can't allocate memory to compress data");
        goto error;
    }

    /* Past the point of no return.  From here on out, we need to make sure
       we clean up mallocs & INCREFs. */

    zst.zalloc = (alloc_func)NULL;
    zst.zfree = (free_func)Z_NULL;
    zst.next_out = (Byte *)output;
    zst.next_in = (Byte *)input;
    zst.avail_in = length;
    err = deflateInit(&zst, level);

    switch(err) {
    case(Z_OK):
        break;
    case(Z_MEM_ERROR):
        PyErr_SetString(PyExc_MemoryError,
                        "Out of memory while compressing data");
        goto error;
    case(Z_STREAM_ERROR):
        PyErr_SetString(ZlibError,
                        "Bad compression level");
        goto error;
    default:
        deflateEnd(&zst);
        zlib_error(zst, err, "while compressing data");
        goto error;
    }

    Py_BEGIN_ALLOW_THREADS;
    err = deflate(&zst, Z_FINISH);
    Py_END_ALLOW_THREADS;

    if (err != Z_STREAM_END) {
        zlib_error(zst, err, "while compressing data");
        deflateEnd(&zst);
        goto error;
    }

    err=deflateEnd(&zst);
    if (err == Z_OK)
        ReturnVal = PyBytes_FromStringAndSize((char *)output,
                                              zst.total_out);
    else
        zlib_error(zst, err, "while finishing compression");

 error:
    PyBuffer_Release(&pinput);
    free(output);

    return ReturnVal;
}

PyDoc_STRVAR(decompress__doc__,
"decompress(string[, wbits[, bufsize]]) -- Return decompressed string.\n"
"\n"
"Optional arg wbits is the window buffer size.  Optional arg bufsize is\n"
"the initial output buffer size.");

static PyObject *
PyZlib_decompress(PyObject *self, PyObject *args)
{
    PyObject *result_str = NULL;
    Py_buffer pinput;
    Byte *input;
    unsigned int length;
    int err;
    int wsize=DEF_WBITS;
    Py_ssize_t r_strlen=DEFAULTALLOC;
    z_stream zst;

    if (!PyArg_ParseTuple(args, "y*|in:decompress",
                          &pinput, &wsize, &r_strlen))
        return NULL;

    if (pinput.len > UINT_MAX) {
        PyErr_SetString(PyExc_OverflowError,
                        "Size does not fit in an unsigned int");
        goto error;
    }
    input = pinput.buf;
    length = pinput.len;

    if (r_strlen <= 0)
        r_strlen = 1;

    zst.avail_in = length;
    zst.avail_out = r_strlen;

    if (!(result_str = PyBytes_FromStringAndSize(NULL, r_strlen)))
        goto error;

    zst.zalloc = (alloc_func)NULL;
    zst.zfree = (free_func)Z_NULL;
    zst.next_out = (Byte *)PyBytes_AS_STRING(result_str);
    zst.next_in = (Byte *)input;
    err = inflateInit2(&zst, wsize);

    switch(err) {
    case(Z_OK):
        break;
    case(Z_MEM_ERROR):
        PyErr_SetString(PyExc_MemoryError,
                        "Out of memory while decompressing data");
        goto error;
    default:
        inflateEnd(&zst);
        zlib_error(zst, err, "while preparing to decompress data");
        goto error;
    }

    do {
        Py_BEGIN_ALLOW_THREADS
        err=inflate(&zst, Z_FINISH);
        Py_END_ALLOW_THREADS

        switch(err) {
        case(Z_STREAM_END):
            break;
        case(Z_BUF_ERROR):
            /*
             * If there is at least 1 byte of room according to zst.avail_out
             * and we get this error, assume that it means zlib cannot
             * process the inflate call() due to an error in the data.
             */
            if (zst.avail_out > 0) {
                zlib_error(zst, err, "while decompressing data");
                inflateEnd(&zst);
                goto error;
            }
            /* fall through */
        case(Z_OK):
            /* need more memory */
            if (_PyBytes_Resize(&result_str, r_strlen << 1) < 0) {
                inflateEnd(&zst);
                goto error;
            }
            zst.next_out =
                (unsigned char *)PyBytes_AS_STRING(result_str) + r_strlen;
            zst.avail_out = r_strlen;
            r_strlen = r_strlen << 1;
            break;
        default:
            inflateEnd(&zst);
            zlib_error(zst, err, "while decompressing data");
            goto error;
        }
    } while (err != Z_STREAM_END);

    err = inflateEnd(&zst);
    if (err != Z_OK) {
        zlib_error(zst, err, "while finishing decompression");
        goto error;
    }

    if (_PyBytes_Resize(&result_str, zst.total_out) < 0)
        goto error;

    PyBuffer_Release(&pinput);
    return result_str;

 error:
    PyBuffer_Release(&pinput);
    Py_XDECREF(result_str);
    return NULL;
}

static PyObject *
PyZlib_compressobj(PyObject *selfptr, PyObject *args)
{
    compobject *self;
    int level=Z_DEFAULT_COMPRESSION, method=DEFLATED;
    int wbits=MAX_WBITS, memLevel=DEF_MEM_LEVEL, strategy=0, err;

    if (!PyArg_ParseTuple(args, "|iiiii:compressobj", &level, &method, &wbits,
                          &memLevel, &strategy))
        return NULL;

    self = newcompobject(&Comptype);
    if (self==NULL)
        return(NULL);
    self->zst.zalloc = (alloc_func)NULL;
    self->zst.zfree = (free_func)Z_NULL;
    self->zst.next_in = NULL;
    self->zst.avail_in = 0;
    err = deflateInit2(&self->zst, level, method, wbits, memLevel, strategy);
    switch(err) {
    case (Z_OK):
        self->is_initialised = 1;
        return (PyObject*)self;
    case (Z_MEM_ERROR):
        Py_DECREF(self);
        PyErr_SetString(PyExc_MemoryError,
                        "Can't allocate memory for compression object");
        return NULL;
    case(Z_STREAM_ERROR):
        Py_DECREF(self);
        PyErr_SetString(PyExc_ValueError, "Invalid initialization option");
        return NULL;
    default:
        zlib_error(self->zst, err, "while creating compression object");
        Py_DECREF(self);
        return NULL;
    }
}

static PyObject *
PyZlib_decompressobj(PyObject *selfptr, PyObject *args)
{
    int wbits=DEF_WBITS, err;
    compobject *self;
    if (!PyArg_ParseTuple(args, "|i:decompressobj", &wbits))
        return NULL;

    self = newcompobject(&Decomptype);
    if (self == NULL)
        return(NULL);
    self->zst.zalloc = (alloc_func)NULL;
    self->zst.zfree = (free_func)Z_NULL;
    self->zst.next_in = NULL;
    self->zst.avail_in = 0;
    err = inflateInit2(&self->zst, wbits);
    switch(err) {
    case (Z_OK):
        self->is_initialised = 1;
        return (PyObject*)self;
    case(Z_STREAM_ERROR):
        Py_DECREF(self);
        PyErr_SetString(PyExc_ValueError, "Invalid initialization option");
        return NULL;
    case (Z_MEM_ERROR):
        Py_DECREF(self);
        PyErr_SetString(PyExc_MemoryError,
                        "Can't allocate memory for decompression object");
        return NULL;
    default:
        zlib_error(self->zst, err, "while creating decompression object");
        Py_DECREF(self);
        return NULL;
    }
}

static void
Dealloc(compobject *self)
{
#ifdef WITH_THREAD
    PyThread_free_lock(self->lock);
#endif
    Py_XDECREF(self->unused_data);
    Py_XDECREF(self->unconsumed_tail);
    PyObject_Del(self);
}

static void
Comp_dealloc(compobject *self)
{
    if (self->is_initialised)
        deflateEnd(&self->zst);
    Dealloc(self);
}

static void
Decomp_dealloc(compobject *self)
{
    if (self->is_initialised)
        inflateEnd(&self->zst);
    Dealloc(self);
}

PyDoc_STRVAR(comp_compress__doc__,
"compress(data) -- Return a string containing data compressed.\n"
"\n"
"After calling this function, some of the input data may still\n"
"be stored in internal buffers for later processing.\n"
"Call the flush() method to clear these buffers.");


static PyObject *
PyZlib_objcompress(compobject *self, PyObject *args)
{
    int err;
    unsigned int inplen;
    Py_ssize_t length = DEFAULTALLOC;
    PyObject *RetVal = NULL;
    Py_buffer pinput;
    Byte *input;
    unsigned long start_total_out;

    if (!PyArg_ParseTuple(args, "y*:compress", &pinput))
        return NULL;
    if (pinput.len > UINT_MAX) {
        PyErr_SetString(PyExc_OverflowError,
                        "Size does not fit in an unsigned int");
        goto error_outer;
    }
    input = pinput.buf;
    inplen = pinput.len;

    if (!(RetVal = PyBytes_FromStringAndSize(NULL, length)))
        goto error_outer;

    ENTER_ZLIB(self);

    start_total_out = self->zst.total_out;
    self->zst.avail_in = inplen;
    self->zst.next_in = input;
    self->zst.avail_out = length;
    self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal);

    Py_BEGIN_ALLOW_THREADS
    err = deflate(&(self->zst), Z_NO_FLUSH);
    Py_END_ALLOW_THREADS

    /* while Z_OK and the output buffer is full, there might be more output,
       so extend the output buffer and try again */
    while (err == Z_OK && self->zst.avail_out == 0) {
        if (_PyBytes_Resize(&RetVal, length << 1) < 0) {
            Py_DECREF(RetVal);
            RetVal = NULL;
            goto error;
        }
        self->zst.next_out =
            (unsigned char *)PyBytes_AS_STRING(RetVal) + length;
        self->zst.avail_out = length;
        length = length << 1;

        Py_BEGIN_ALLOW_THREADS
        err = deflate(&(self->zst), Z_NO_FLUSH);
        Py_END_ALLOW_THREADS
    }
    /* We will only get Z_BUF_ERROR if the output buffer was full but
       there wasn't more output when we tried again, so it is not an error
       condition.
    */

    if (err != Z_OK && err != Z_BUF_ERROR) {
        zlib_error(self->zst, err, "while compressing data");
        Py_DECREF(RetVal);
        RetVal = NULL;
        goto error;
    }
    if (_PyBytes_Resize(&RetVal, self->zst.total_out - start_total_out) < 0) {
        Py_DECREF(RetVal);
        RetVal = NULL;
    }

 error:
    LEAVE_ZLIB(self);
 error_outer:
    PyBuffer_Release(&pinput);
    return RetVal;
}

PyDoc_STRVAR(decomp_decompress__doc__,
"decompress(data, max_length) -- Return a string containing the decompressed\n"
"version of the data.\n"
"\n"
"After calling this function, some of the input data may still be stored in\n"
"internal buffers for later processing.\n"
"Call the flush() method to clear these buffers.\n"
"If the max_length parameter is specified then the return value will be\n"
"no longer than max_length.  Unconsumed input data will be stored in\n"
"the unconsumed_tail attribute.");

static PyObject *
PyZlib_objdecompress(compobject *self, PyObject *args)
{
    int err, max_length = 0;
    unsigned int inplen;
    Py_ssize_t old_length, length = DEFAULTALLOC;
    PyObject *RetVal = NULL;
    Py_buffer pinput;
    Byte *input;
    unsigned long start_total_out;

    if (!PyArg_ParseTuple(args, "y*|i:decompress", &pinput,
                          &max_length))
        return NULL;
    if (pinput.len > UINT_MAX) {
        PyErr_SetString(PyExc_OverflowError,
                        "Size does not fit in an unsigned int");
        goto error_outer;
    }
    input = pinput.buf;
    inplen = pinput.len;
    if (max_length < 0) {
        PyErr_SetString(PyExc_ValueError,
                        "max_length must be greater than zero");
        goto error_outer;
    }

    /* limit amount of data allocated to max_length */
    if (max_length && length > max_length)
        length = max_length;
    if (!(RetVal = PyBytes_FromStringAndSize(NULL, length)))
        goto error_outer;

    ENTER_ZLIB(self);

    start_total_out = self->zst.total_out;
    self->zst.avail_in = inplen;
    self->zst.next_in = input;
    self->zst.avail_out = length;
    self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal);

    Py_BEGIN_ALLOW_THREADS
    err = inflate(&(self->zst), Z_SYNC_FLUSH);
    Py_END_ALLOW_THREADS

    /* While Z_OK and the output buffer is full, there might be more output.
       So extend the output buffer and try again.
    */
    while (err == Z_OK && self->zst.avail_out == 0) {
        /* If max_length set, don't continue decompressing if we've already
           reached the limit.
        */
        if (max_length && length >= max_length)
            break;

        /* otherwise, ... */
        old_length = length;
        length = length << 1;
        if (max_length && length > max_length)
            length = max_length;

        if (_PyBytes_Resize(&RetVal, length) < 0) {
            Py_DECREF(RetVal);
            RetVal = NULL;
            goto error;
        }
        self->zst.next_out =
            (unsigned char *)PyBytes_AS_STRING(RetVal) + old_length;
        self->zst.avail_out = length - old_length;

        Py_BEGIN_ALLOW_THREADS
        err = inflate(&(self->zst), Z_SYNC_FLUSH);
        Py_END_ALLOW_THREADS
    }

    if(max_length) {
        /* Not all of the compressed data could be accommodated in a buffer of
           the specified size. Return the unconsumed tail in an attribute. */
        Py_DECREF(self->unconsumed_tail);
        self->unconsumed_tail = PyBytes_FromStringAndSize((char *)self->zst.next_in,
                                                           self->zst.avail_in);
    }
    else if (PyBytes_GET_SIZE(self->unconsumed_tail) > 0) {
        /* All of the compressed data was consumed. Clear unconsumed_tail. */
        Py_DECREF(self->unconsumed_tail);
        self->unconsumed_tail = PyBytes_FromStringAndSize("", 0);
    }
    if (self->unconsumed_tail == NULL) {
        Py_DECREF(RetVal);
        RetVal = NULL;
        goto error;
    }

    /* The end of the compressed data has been reached, so set the
       unused_data attribute to a string containing the remainder of the
       data in the string.  Note that this is also a logical place to call
       inflateEnd, but the old behaviour of only calling it on flush() is
       preserved.
    */
    if (err == Z_STREAM_END) {
        Py_XDECREF(self->unused_data);  /* Free original empty string */
        self->unused_data = PyBytes_FromStringAndSize(
            (char *)self->zst.next_in, self->zst.avail_in);
        if (self->unused_data == NULL) {
            Py_DECREF(RetVal);
            goto error;
        }
        self->eof = 1;
        /* We will only get Z_BUF_ERROR if the output buffer was full
           but there wasn't more output when we tried again, so it is
           not an error condition.
        */
    } else if (err != Z_OK && err != Z_BUF_ERROR) {
        zlib_error(self->zst, err, "while decompressing data");
        Py_DECREF(RetVal);
        RetVal = NULL;
        goto error;
    }

    if (_PyBytes_Resize(&RetVal, self->zst.total_out - start_total_out) < 0) {
        Py_DECREF(RetVal);
        RetVal = NULL;
    }

 error:
    LEAVE_ZLIB(self);
 error_outer:
    PyBuffer_Release(&pinput);
    return RetVal;
}

PyDoc_STRVAR(comp_flush__doc__,
"flush( [mode] ) -- Return a string containing any remaining compressed data.\n"
"\n"
"mode can be one of the constants Z_SYNC_FLUSH, Z_FULL_FLUSH, Z_FINISH; the\n"
"default value used when mode is not specified is Z_FINISH.\n"
"If mode == Z_FINISH, the compressor object can no longer be used after\n"
"calling the flush() method.  Otherwise, more data can still be compressed.");

static PyObject *
PyZlib_flush(compobject *self, PyObject *args)
{
    int err, length = DEFAULTALLOC;
    PyObject *RetVal;
    int flushmode = Z_FINISH;
    unsigned long start_total_out;

    if (!PyArg_ParseTuple(args, "|i:flush", &flushmode))
        return NULL;

    /* Flushing with Z_NO_FLUSH is a no-op, so there's no point in
       doing any work at all; just return an empty string. */
    if (flushmode == Z_NO_FLUSH) {
        return PyBytes_FromStringAndSize(NULL, 0);
    }

    if (!(RetVal = PyBytes_FromStringAndSize(NULL, length)))
        return NULL;

    ENTER_ZLIB(self);

    start_total_out = self->zst.total_out;
    self->zst.avail_in = 0;
    self->zst.avail_out = length;
    self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal);

    Py_BEGIN_ALLOW_THREADS
    err = deflate(&(self->zst), flushmode);
    Py_END_ALLOW_THREADS

    /* while Z_OK and the output buffer is full, there might be more output,
       so extend the output buffer and try again */
    while (err == Z_OK && self->zst.avail_out == 0) {
        if (_PyBytes_Resize(&RetVal, length << 1) < 0) {
            Py_DECREF(RetVal);
            RetVal = NULL;
            goto error;
        }
        self->zst.next_out =
            (unsigned char *)PyBytes_AS_STRING(RetVal) + length;
        self->zst.avail_out = length;
        length = length << 1;

        Py_BEGIN_ALLOW_THREADS
        err = deflate(&(self->zst), flushmode);
        Py_END_ALLOW_THREADS
    }

    /* If flushmode is Z_FINISH, we also have to call deflateEnd() to free
       various data structures. Note we should only get Z_STREAM_END when
       flushmode is Z_FINISH, but checking both for safety*/
    if (err == Z_STREAM_END && flushmode == Z_FINISH) {
        err = deflateEnd(&(self->zst));
        if (err != Z_OK) {
            zlib_error(self->zst, err, "while finishing compression");
            Py_DECREF(RetVal);
            RetVal = NULL;
            goto error;
        }
        else
            self->is_initialised = 0;

        /* We will only get Z_BUF_ERROR if the output buffer was full
           but there wasn't more output when we tried again, so it is
           not an error condition.
        */
    } else if (err!=Z_OK && err!=Z_BUF_ERROR) {
        zlib_error(self->zst, err, "while flushing");
        Py_DECREF(RetVal);
        RetVal = NULL;
        goto error;
    }

    if (_PyBytes_Resize(&RetVal, self->zst.total_out - start_total_out) < 0) {
        Py_DECREF(RetVal);
        RetVal = NULL;
    }

 error:
    LEAVE_ZLIB(self);

    return RetVal;
}

#ifdef HAVE_ZLIB_COPY
PyDoc_STRVAR(comp_copy__doc__,
"copy() -- Return a copy of the compression object.");

static PyObject *
PyZlib_copy(compobject *self)
{
    compobject *retval = NULL;
    int err;

    retval = newcompobject(&Comptype);
    if (!retval) return NULL;

    /* Copy the zstream state
     * We use ENTER_ZLIB / LEAVE_ZLIB to make this thread-safe
     */
    ENTER_ZLIB(self);
    err = deflateCopy(&retval->zst, &self->zst);
    switch(err) {
    case(Z_OK):
        break;
    case(Z_STREAM_ERROR):
        PyErr_SetString(PyExc_ValueError, "Inconsistent stream state");
        goto error;
    case(Z_MEM_ERROR):
        PyErr_SetString(PyExc_MemoryError,
                        "Can't allocate memory for compression object");
        goto error;
    default:
        zlib_error(self->zst, err, "while copying compression object");
        goto error;
    }
    Py_INCREF(self->unused_data);
    Py_INCREF(self->unconsumed_tail);
    Py_XDECREF(retval->unused_data);
    Py_XDECREF(retval->unconsumed_tail);
    retval->unused_data = self->unused_data;
    retval->unconsumed_tail = self->unconsumed_tail;
    retval->eof = self->eof;

    /* Mark it as being initialized */
    retval->is_initialised = 1;

    LEAVE_ZLIB(self);
    return (PyObject *)retval;

error:
    LEAVE_ZLIB(self);
    Py_XDECREF(retval);
    return NULL;
}

PyDoc_STRVAR(decomp_copy__doc__,
"copy() -- Return a copy of the decompression object.");

static PyObject *
PyZlib_uncopy(compobject *self)
{
    compobject *retval = NULL;
    int err;

    retval = newcompobject(&Decomptype);
    if (!retval) return NULL;

    /* Copy the zstream state
     * We use ENTER_ZLIB / LEAVE_ZLIB to make this thread-safe
     */
    ENTER_ZLIB(self);
    err = inflateCopy(&retval->zst, &self->zst);
    switch(err) {
    case(Z_OK):
        break;
    case(Z_STREAM_ERROR):
        PyErr_SetString(PyExc_ValueError, "Inconsistent stream state");
        goto error;
    case(Z_MEM_ERROR):
        PyErr_SetString(PyExc_MemoryError,
                        "Can't allocate memory for decompression object");
        goto error;
    default:
        zlib_error(self->zst, err, "while copying decompression object");
        goto error;
    }

    Py_INCREF(self->unused_data);
    Py_INCREF(self->unconsumed_tail);
    Py_XDECREF(retval->unused_data);
    Py_XDECREF(retval->unconsumed_tail);
    retval->unused_data = self->unused_data;
    retval->unconsumed_tail = self->unconsumed_tail;
    retval->eof = self->eof;

    /* Mark it as being initialized */
    retval->is_initialised = 1;

    LEAVE_ZLIB(self);
    return (PyObject *)retval;

error:
    LEAVE_ZLIB(self);
    Py_XDECREF(retval);
    return NULL;
}
#endif

PyDoc_STRVAR(decomp_flush__doc__,
"flush( [length] ) -- Return a string containing any remaining\n"
"decompressed data. length, if given, is the initial size of the\n"
"output buffer.\n"
"\n"
"The decompressor object can no longer be used after this call.");

static PyObject *
PyZlib_unflush(compobject *self, PyObject *args)
{
    int err, length = DEFAULTALLOC;
    PyObject * retval = NULL;
    unsigned long start_total_out;

    if (!PyArg_ParseTuple(args, "|i:flush", &length))
        return NULL;
    if (length <= 0) {
        PyErr_SetString(PyExc_ValueError, "length must be greater than zero");
        return NULL;
    }
    if (!(retval = PyBytes_FromStringAndSize(NULL, length)))
        return NULL;


    ENTER_ZLIB(self);

    start_total_out = self->zst.total_out;
    self->zst.avail_out = length;
    self->zst.next_out = (Byte *)PyBytes_AS_STRING(retval);

    Py_BEGIN_ALLOW_THREADS
    err = inflate(&(self->zst), Z_FINISH);
    Py_END_ALLOW_THREADS

    /* while Z_OK and the output buffer is full, there might be more output,
       so extend the output buffer and try again */
    while ((err == Z_OK || err == Z_BUF_ERROR) && self->zst.avail_out == 0) {
        if (_PyBytes_Resize(&retval, length << 1) < 0) {
            Py_DECREF(retval);
            retval = NULL;
            goto error;
        }
        self->zst.next_out = (Byte *)PyBytes_AS_STRING(retval) + length;
        self->zst.avail_out = length;
        length = length << 1;

        Py_BEGIN_ALLOW_THREADS
        err = inflate(&(self->zst), Z_FINISH);
        Py_END_ALLOW_THREADS
    }

    /* If at end of stream, clean up any memory allocated by zlib. */
    if (err == Z_STREAM_END) {
        self->eof = 1;
        self->is_initialised = 0;
        err = inflateEnd(&(self->zst));
        if (err != Z_OK) {
            zlib_error(self->zst, err, "while finishing decompression");
            Py_DECREF(retval);
            retval = NULL;
            goto error;
        }
    }
    if (_PyBytes_Resize(&retval, self->zst.total_out - start_total_out) < 0) {
        Py_DECREF(retval);
        retval = NULL;
    }

error:

    LEAVE_ZLIB(self);

    return retval;
}

static PyMethodDef comp_methods[] =
{
    {"compress", (binaryfunc)PyZlib_objcompress, METH_VARARGS,
                 comp_compress__doc__},
    {"flush", (binaryfunc)PyZlib_flush, METH_VARARGS,
              comp_flush__doc__},
#ifdef HAVE_ZLIB_COPY
    {"copy",  (PyCFunction)PyZlib_copy, METH_NOARGS,
              comp_copy__doc__},
#endif
    {NULL, NULL}
};

static PyMethodDef Decomp_methods[] =
{
    {"decompress", (binaryfunc)PyZlib_objdecompress, METH_VARARGS,
                   decomp_decompress__doc__},
    {"flush", (binaryfunc)PyZlib_unflush, METH_VARARGS,
              decomp_flush__doc__},
#ifdef HAVE_ZLIB_COPY
    {"copy",  (PyCFunction)PyZlib_uncopy, METH_NOARGS,
              decomp_copy__doc__},
#endif
    {NULL, NULL}
};

#define COMP_OFF(x) offsetof(compobject, x)
static PyMemberDef Decomp_members[] = {
    {"unused_data",     T_OBJECT, COMP_OFF(unused_data), READONLY},
    {"unconsumed_tail", T_OBJECT, COMP_OFF(unconsumed_tail), READONLY},
    {"eof",             T_BOOL,   COMP_OFF(eof), READONLY},
    {NULL},
};

PyDoc_STRVAR(adler32__doc__,
"adler32(string[, start]) -- Compute an Adler-32 checksum of string.\n"
"\n"
"An optional starting value can be specified.  The returned checksum is\n"
"an integer.");

static PyObject *
PyZlib_adler32(PyObject *self, PyObject *args)
{
    unsigned int adler32val = 1;  /* adler32(0L, Z_NULL, 0) */
    Py_buffer pbuf;

    if (!PyArg_ParseTuple(args, "y*|I:adler32", &pbuf, &adler32val))
        return NULL;
    /* Releasing the GIL for very small buffers is inefficient
       and may lower performance */
    if (pbuf.len > 1024*5) {
        unsigned char *buf = pbuf.buf;
        Py_ssize_t len = pbuf.len;

        Py_BEGIN_ALLOW_THREADS
        /* Avoid truncation of length for very large buffers. adler32() takes
           length as an unsigned int, which may be narrower than Py_ssize_t. */
        while (len > (size_t) UINT_MAX) {
            adler32val = adler32(adler32val, buf, UINT_MAX);
            buf += (size_t) UINT_MAX;
            len -= (size_t) UINT_MAX;
        }
        adler32val = adler32(adler32val, buf, len);
        Py_END_ALLOW_THREADS
    } else {
        adler32val = adler32(adler32val, pbuf.buf, pbuf.len);
    }
    PyBuffer_Release(&pbuf);
    return PyLong_FromUnsignedLong(adler32val & 0xffffffffU);
}

PyDoc_STRVAR(crc32__doc__,
"crc32(string[, start]) -- Compute a CRC-32 checksum of string.\n"
"\n"
"An optional starting value can be specified.  The returned checksum is\n"
"an integer.");

static PyObject *
PyZlib_crc32(PyObject *self, PyObject *args)
{
    unsigned int crc32val = 0;  /* crc32(0L, Z_NULL, 0) */
    Py_buffer pbuf;
    int signed_val;

    if (!PyArg_ParseTuple(args, "y*|I:crc32", &pbuf, &crc32val))
        return NULL;
    /* Releasing the GIL for very small buffers is inefficient
       and may lower performance */
    if (pbuf.len > 1024*5) {
        unsigned char *buf = pbuf.buf;
        Py_ssize_t len = pbuf.len;

        Py_BEGIN_ALLOW_THREADS
        /* Avoid truncation of length for very large buffers. crc32() takes
           length as an unsigned int, which may be narrower than Py_ssize_t. */
        while (len > (size_t) UINT_MAX) {
            crc32val = crc32(crc32val, buf, UINT_MAX);
            buf += (size_t) UINT_MAX;
            len -= (size_t) UINT_MAX;
        }
        signed_val = crc32(crc32val, buf, len);
        Py_END_ALLOW_THREADS
    } else {
        signed_val = crc32(crc32val, pbuf.buf, pbuf.len);
    }
    PyBuffer_Release(&pbuf);
    return PyLong_FromUnsignedLong(signed_val & 0xffffffffU);
}


static PyMethodDef zlib_methods[] =
{
    {"adler32", (PyCFunction)PyZlib_adler32, METH_VARARGS,
                adler32__doc__},
    {"compress", (PyCFunction)PyZlib_compress,  METH_VARARGS,
                 compress__doc__},
    {"compressobj", (PyCFunction)PyZlib_compressobj, METH_VARARGS,
                    compressobj__doc__},
    {"crc32", (PyCFunction)PyZlib_crc32, METH_VARARGS,
              crc32__doc__},
    {"decompress", (PyCFunction)PyZlib_decompress, METH_VARARGS,
                   decompress__doc__},
    {"decompressobj", (PyCFunction)PyZlib_decompressobj, METH_VARARGS,
                   decompressobj__doc__},
    {NULL, NULL}
};

static PyTypeObject Comptype = {
    PyVarObject_HEAD_INIT(0, 0)
    "zlib.Compress",
    sizeof(compobject),
    0,
    (destructor)Comp_dealloc,       /*tp_dealloc*/
    0,                              /*tp_print*/
    0,                              /*tp_getattr*/
    0,                              /*tp_setattr*/
    0,                              /*tp_reserved*/
    0,                              /*tp_repr*/
    0,                              /*tp_as_number*/
    0,                              /*tp_as_sequence*/
    0,                              /*tp_as_mapping*/
    0,                              /*tp_hash*/
    0,                              /*tp_call*/
    0,                              /*tp_str*/
    0,                              /*tp_getattro*/
    0,                              /*tp_setattro*/
    0,                              /*tp_as_buffer*/
    Py_TPFLAGS_DEFAULT,             /*tp_flags*/
    0,                              /*tp_doc*/
    0,                              /*tp_traverse*/
    0,                              /*tp_clear*/
    0,                              /*tp_richcompare*/
    0,                              /*tp_weaklistoffset*/
    0,                              /*tp_iter*/
    0,                              /*tp_iternext*/
    comp_methods,                   /*tp_methods*/
};

static PyTypeObject Decomptype = {
    PyVarObject_HEAD_INIT(0, 0)
    "zlib.Decompress",
    sizeof(compobject),
    0,
    (destructor)Decomp_dealloc,     /*tp_dealloc*/
    0,                              /*tp_print*/
    0,                              /*tp_getattr*/
    0,                              /*tp_setattr*/
    0,                              /*tp_reserved*/
    0,                              /*tp_repr*/
    0,                              /*tp_as_number*/
    0,                              /*tp_as_sequence*/
    0,                              /*tp_as_mapping*/
    0,                              /*tp_hash*/
    0,                              /*tp_call*/
    0,                              /*tp_str*/
    0,                              /*tp_getattro*/
    0,                              /*tp_setattro*/
    0,                              /*tp_as_buffer*/
    Py_TPFLAGS_DEFAULT,             /*tp_flags*/
    0,                              /*tp_doc*/
    0,                              /*tp_traverse*/
    0,                              /*tp_clear*/
    0,                              /*tp_richcompare*/
    0,                              /*tp_weaklistoffset*/
    0,                              /*tp_iter*/
    0,                              /*tp_iternext*/
    Decomp_methods,                 /*tp_methods*/
    Decomp_members,                 /*tp_members*/
};

PyDoc_STRVAR(zlib_module_documentation,
"The functions in this module allow compression and decompression using the\n"
"zlib library, which is based on GNU zip.\n"
"\n"
"adler32(string[, start]) -- Compute an Adler-32 checksum.\n"
"compress(string[, level]) -- Compress string, with compression level in 1-9.\n"
"compressobj([level]) -- Return a compressor object.\n"
"crc32(string[, start]) -- Compute a CRC-32 checksum.\n"
"decompress(string,[wbits],[bufsize]) -- Decompresses a compressed string.\n"
"decompressobj([wbits]) -- Return a decompressor object.\n"
"\n"
"'wbits' is window buffer size.\n"
"Compressor objects support compress() and flush() methods; decompressor\n"
"objects support decompress() and flush().");

static struct PyModuleDef zlibmodule = {
        PyModuleDef_HEAD_INIT,
        "zlib",
        zlib_module_documentation,
        -1,
        zlib_methods,
        NULL,
        NULL,
        NULL,
        NULL
};

PyMODINIT_FUNC
PyInit_zlib(void)
{
    PyObject *m, *ver;
    if (PyType_Ready(&Comptype) < 0)
            return NULL;
    if (PyType_Ready(&Decomptype) < 0)
            return NULL;
    m = PyModule_Create(&zlibmodule);
    if (m == NULL)
        return NULL;

    ZlibError = PyErr_NewException("zlib.error", NULL, NULL);
    if (ZlibError != NULL) {
        Py_INCREF(ZlibError);
        PyModule_AddObject(m, "error", ZlibError);
    }
    PyModule_AddIntConstant(m, "MAX_WBITS", MAX_WBITS);
    PyModule_AddIntConstant(m, "DEFLATED", DEFLATED);
    PyModule_AddIntConstant(m, "DEF_MEM_LEVEL", DEF_MEM_LEVEL);
    PyModule_AddIntConstant(m, "Z_BEST_SPEED", Z_BEST_SPEED);
    PyModule_AddIntConstant(m, "Z_BEST_COMPRESSION", Z_BEST_COMPRESSION);
    PyModule_AddIntConstant(m, "Z_DEFAULT_COMPRESSION", Z_DEFAULT_COMPRESSION);
    PyModule_AddIntConstant(m, "Z_FILTERED", Z_FILTERED);
    PyModule_AddIntConstant(m, "Z_HUFFMAN_ONLY", Z_HUFFMAN_ONLY);
    PyModule_AddIntConstant(m, "Z_DEFAULT_STRATEGY", Z_DEFAULT_STRATEGY);

    PyModule_AddIntConstant(m, "Z_FINISH", Z_FINISH);
    PyModule_AddIntConstant(m, "Z_NO_FLUSH", Z_NO_FLUSH);
    PyModule_AddIntConstant(m, "Z_SYNC_FLUSH", Z_SYNC_FLUSH);
    PyModule_AddIntConstant(m, "Z_FULL_FLUSH", Z_FULL_FLUSH);

    ver = PyUnicode_FromString(ZLIB_VERSION);
    if (ver != NULL)
        PyModule_AddObject(m, "ZLIB_VERSION", ver);

    PyModule_AddStringConstant(m, "__version__", "1.0");

    return m;
}