[svn-r11061] Snapshot version 1.6 release 4 (post4)

10 files changed, 49 insertions, 42 deletions

diff --git a/README.txt b/README.txt
index 8f635d8..1d3ef65 100644
--- a/README.txt
+++ b/README.txt
@@ -1,4 +1,4 @@
-HDF5 version 1.6.4-post4 currently under development
+HDF5 version 1.6.4-post5 currently under development
 Please refer to the release_docs/INSTALL file for installation instructions.
 ------------------------------------------------------------------------------
 
diff --git a/c++/configure b/c++/configure
index 13f8524..b274f65 100755
--- a/c++/configure
+++ b/c++/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 # From c++/configure.in Id: configure.in.
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for HDF5 C++ 1.6.4-post4.
+# Generated by GNU Autoconf 2.59 for HDF5 C++ 1.6.4-post5.
 #
 # Report bugs to <hdfhelp@ncsa.uiuc.edu>.
 #
@@ -429,8 +429,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='HDF5 C++'
 PACKAGE_TARNAME='hdf5-c--'
-PACKAGE_VERSION='1.6.4-post4'
-PACKAGE_STRING='HDF5 C++ 1.6.4-post4'
+PACKAGE_VERSION='1.6.4-post5'
+PACKAGE_STRING='HDF5 C++ 1.6.4-post5'
 PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu'
 
 ac_unique_file="src/H5Library.cpp"
@@ -952,7 +952,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures HDF5 C++ 1.6.4-post4 to adapt to many kinds of systems.
+\`configure' configures HDF5 C++ 1.6.4-post5 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1013,7 +1013,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of HDF5 C++ 1.6.4-post4:";;
+     short | recursive ) echo "Configuration of HDF5 C++ 1.6.4-post5:";;
    esac
   cat <<\_ACEOF
 
@@ -1152,7 +1152,7 @@ fi
 test -n "$ac_init_help" && exit 0
 if $ac_init_version; then
   cat <<\_ACEOF
-HDF5 C++ configure 1.6.4-post4
+HDF5 C++ configure 1.6.4-post5
 generated by GNU Autoconf 2.59
 
 Copyright (C) 2003 Free Software Foundation, Inc.
@@ -1166,7 +1166,7 @@ cat >&5 <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by HDF5 C++ $as_me 1.6.4-post4, which was
+It was created by HDF5 C++ $as_me 1.6.4-post5, which was
 generated by GNU Autoconf 2.59.  Invocation command line was
 
   $ $0 $@
@@ -10986,7 +10986,7 @@ _ASBOX
 } >&5
 cat >&5 <<_CSEOF
 
-This file was extended by HDF5 C++ $as_me 1.6.4-post4, which was
+This file was extended by HDF5 C++ $as_me 1.6.4-post5, which was
 generated by GNU Autoconf 2.59.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -11041,7 +11041,7 @@ _ACEOF
 
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
-HDF5 C++ config.status 1.6.4-post4
+HDF5 C++ config.status 1.6.4-post5
 configured by $0, generated by GNU Autoconf 2.59,
   with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
 
diff --git a/c++/configure.in b/c++/configure.in
index 4b28a2e..085c92e 100644
--- a/c++/configure.in
+++ b/c++/configure.in
@@ -27,7 +27,7 @@ dnl
 dnl NOTE: Don't forget to change the version number here when we do a
 dnl release!!!
 dnl
-AC_INIT([HDF5 C++], [1.6.4-post4], [hdfhelp@ncsa.uiuc.edu])
+AC_INIT([HDF5 C++], [1.6.4-post5], [hdfhelp@ncsa.uiuc.edu])
 AC_CONFIG_SRCDIR([src/H5Library.cpp])
 AC_CONFIG_AUX_DIR([../bin])
 
diff --git a/configure b/configure
index e44ecc1..b076685 100755
--- a/configure
+++ b/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 # From configure.in Id: configure.in.
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for HDF5 1.6.4-post4.
+# Generated by GNU Autoconf 2.59 for HDF5 1.6.4-post5.
 #
 # Report bugs to <hdfhelp@ncsa.uiuc.edu>.
 #
@@ -429,8 +429,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='HDF5'
 PACKAGE_TARNAME='hdf5'
-PACKAGE_VERSION='1.6.4-post4'
-PACKAGE_STRING='HDF5 1.6.4-post4'
+PACKAGE_VERSION='1.6.4-post5'
+PACKAGE_STRING='HDF5 1.6.4-post5'
 PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu'
 
 ac_unique_file="src/H5.c"
@@ -942,7 +942,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures HDF5 1.6.4-post4 to adapt to many kinds of systems.
+\`configure' configures HDF5 1.6.4-post5 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1003,7 +1003,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of HDF5 1.6.4-post4:";;
+     short | recursive ) echo "Configuration of HDF5 1.6.4-post5:";;
    esac
   cat <<\_ACEOF
 
@@ -1181,7 +1181,7 @@ fi
 test -n "$ac_init_help" && exit 0
 if $ac_init_version; then
   cat <<\_ACEOF
-HDF5 configure 1.6.4-post4
+HDF5 configure 1.6.4-post5
 generated by GNU Autoconf 2.59
 
 Copyright (C) 2003 Free Software Foundation, Inc.
@@ -1195,7 +1195,7 @@ cat >&5 <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by HDF5 $as_me 1.6.4-post4, which was
+It was created by HDF5 $as_me 1.6.4-post5, which was
 generated by GNU Autoconf 2.59.  Invocation command line was
 
   $ $0 $@
@@ -37034,7 +37034,7 @@ _ASBOX
 } >&5
 cat >&5 <<_CSEOF
 
-This file was extended by HDF5 $as_me 1.6.4-post4, which was
+This file was extended by HDF5 $as_me 1.6.4-post5, which was
 generated by GNU Autoconf 2.59.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -37097,7 +37097,7 @@ _ACEOF
 
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
-HDF5 config.status 1.6.4-post4
+HDF5 config.status 1.6.4-post5
 configured by $0, generated by GNU Autoconf 2.59,
   with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
 
diff --git a/configure.in b/configure.in
index ae06d81..fe73e65 100644
--- a/configure.in
+++ b/configure.in
@@ -24,7 +24,7 @@ dnl
 dnl NOTE: Don't forget to change the version number here when we do a
 dnl release!!!
 dnl
-AC_INIT([HDF5], [1.6.4-post4], [hdfhelp@ncsa.uiuc.edu])
+AC_INIT([HDF5], [1.6.4-post5], [hdfhelp@ncsa.uiuc.edu])
 AC_CONFIG_SRCDIR([src/H5.c])
 AC_CONFIG_HEADER([src/H5config.h])
 
diff --git a/doc/html/ADGuide/RELEASE.txt b/doc/html/ADGuide/RELEASE.txt
index c5ba615..7061949 100644
--- a/doc/html/ADGuide/RELEASE.txt
+++ b/doc/html/ADGuide/RELEASE.txt
@@ -1,4 +1,4 @@
-HDF5 version 1.6.4-post3 released on Sun Jul  3 17:52:03 CDT 2005
+HDF5 version 1.6.4-post4 released on Sun Jul 10 17:50:56 CDT 2005
 ================================================================================
 
 INTRODUCTION
@@ -72,6 +72,11 @@ Bug Fixes since HDF5-1.6.4 release
 
     Library
     -------
+        - Dataset sieve buffer cache was inadvertantly disabled - re-enable 
+            it.  QAK - 2005/07/08
+        - Don't unmount child files until the parent file actually closes.
+            (Previously, if an object is holding open a file, the child files
+            would get unmounted too early).  QAK - 2005/07/05
         - Fixed bug where unmounted files could cause the library to go into
             an infinite loop when shutting down.  QAK - 2005/06/30
         - Fixed bug with hyperslab selections that use selection offsets and
@@ -304,13 +309,15 @@ Footnotes:  (1) Using mpich 1.2.6
 
 Known Problems
 ==============
-* The dataset created with the v1.6.2 library can't be read with the v1.6.3
-  library or after when Fletcher32 EDC(filter) is enabled.  There was a bug 
-  in the calculating code of the Fletcher32 checksum in the library before 
-  v1.6.3.  The checksum value wasn't consistent between big-endian and
-  little-endian systems.  This bug was fixed in Release 1.6.3.  However, after
-  fixing the bug, the checksum value is no longer the same as before on
-  little-endian system.  SLU - 2005/6/30
+* The dataset created or rewritten with the v1.6.3 library or after can't 
+  be read with the v1.6.2 library or before when Fletcher32 EDC(filter) is 
+  enabled.  There was a bug in the calculating code of the Fletcher32 
+  checksum in the library before v1.6.3.  The checksum value wasn't consistent 
+  between big-endian and little-endian systems.  This bug was fixed in 
+  Release 1.6.3.  However, after fixing the bug, the checksum value is no 
+  longer the same as before on little-endian system.  The library release 
+  after 1.6.4 can still read the dataset created or rewritten with the library
+  of v1.6.2 or before.  SLU - 2005/7/8
 * For the version 6(6.02 and 6.04) of Portland Group compiler on AMD Opteron
   processor, there's a bug in the compiler for optimization(-O2).  The library
   failed in several tests but all related to multi driver.  The problem has 
diff --git a/fortran/configure b/fortran/configure
index 32bf445..9c34e44 100755
--- a/fortran/configure
+++ b/fortran/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 # From fortran/configure.in Id: configure.in.
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for HDF5 Fortran 1.6.4-post4.
+# Generated by GNU Autoconf 2.59 for HDF5 Fortran 1.6.4-post5.
 #
 # Report bugs to <hdfhelp@ncsa.uiuc.edu>.
 #
@@ -429,8 +429,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='HDF5 Fortran'
 PACKAGE_TARNAME='hdf5-fortran'
-PACKAGE_VERSION='1.6.4-post4'
-PACKAGE_STRING='HDF5 Fortran 1.6.4-post4'
+PACKAGE_VERSION='1.6.4-post5'
+PACKAGE_STRING='HDF5 Fortran 1.6.4-post5'
 PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu'
 
 ac_unique_file="src/HDF5.f90"
@@ -940,7 +940,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures HDF5 Fortran 1.6.4-post4 to adapt to many kinds of systems.
+\`configure' configures HDF5 Fortran 1.6.4-post5 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1001,7 +1001,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of HDF5 Fortran 1.6.4-post4:";;
+     short | recursive ) echo "Configuration of HDF5 Fortran 1.6.4-post5:";;
    esac
   cat <<\_ACEOF
 
@@ -1144,7 +1144,7 @@ fi
 test -n "$ac_init_help" && exit 0
 if $ac_init_version; then
   cat <<\_ACEOF
-HDF5 Fortran configure 1.6.4-post4
+HDF5 Fortran configure 1.6.4-post5
 generated by GNU Autoconf 2.59
 
 Copyright (C) 2003 Free Software Foundation, Inc.
@@ -1158,7 +1158,7 @@ cat >&5 <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by HDF5 Fortran $as_me 1.6.4-post4, which was
+It was created by HDF5 Fortran $as_me 1.6.4-post5, which was
 generated by GNU Autoconf 2.59.  Invocation command line was
 
   $ $0 $@
@@ -12184,7 +12184,7 @@ _ASBOX
 } >&5
 cat >&5 <<_CSEOF
 
-This file was extended by HDF5 Fortran $as_me 1.6.4-post4, which was
+This file was extended by HDF5 Fortran $as_me 1.6.4-post5, which was
 generated by GNU Autoconf 2.59.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -12247,7 +12247,7 @@ _ACEOF
 
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
-HDF5 Fortran config.status 1.6.4-post4
+HDF5 Fortran config.status 1.6.4-post5
 configured by $0, generated by GNU Autoconf 2.59,
   with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
 
diff --git a/fortran/configure.in b/fortran/configure.in
index ebeb51a..2400e45 100644
--- a/fortran/configure.in
+++ b/fortran/configure.in
@@ -24,7 +24,7 @@ dnl
 dnl NOTE: Don't forget to change the version number here when we do a
 dnl release!!!
 dnl
-AC_INIT([HDF5 Fortran], [1.6.4-post4], [hdfhelp@ncsa.uiuc.edu])
+AC_INIT([HDF5 Fortran], [1.6.4-post5], [hdfhelp@ncsa.uiuc.edu])
 AC_CONFIG_SRCDIR([src/HDF5.f90])
 AC_CONFIG_HEADER([src/H5config_fortran.h])
 
diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt
index 6de2514..5706e91 100644
--- a/release_docs/RELEASE.txt
+++ b/release_docs/RELEASE.txt
@@ -1,4 +1,4 @@
-HDF5 version 1.6.4-post4 currently under development
+HDF5 version 1.6.4-post5 currently under development
 ================================================================================
 
 INTRODUCTION
diff --git a/src/H5public.h b/src/H5public.h
index 45f0cfe..81c98fe 100644
--- a/src/H5public.h
+++ b/src/H5public.h
@@ -75,9 +75,9 @@ extern "C" {
 #define H5_VERS_MAJOR	1	/* For major interface/format changes  	     */
 #define H5_VERS_MINOR	6	/* For minor interface/format changes  	     */
 #define H5_VERS_RELEASE	4	/* For tweaks, bug-fixes, or development     */
-#define H5_VERS_SUBRELEASE "post4"	/* For pre-releases like snap0       */
+#define H5_VERS_SUBRELEASE "post5"	/* For pre-releases like snap0       */
 				/* Empty string for real releases.           */
-#define H5_VERS_INFO    "HDF5 library version: 1.6.4-post4"      /* Full version string */
+#define H5_VERS_INFO    "HDF5 library version: 1.6.4-post5"      /* Full version string */
 
 #define H5check()	H5check_version(H5_VERS_MAJOR,H5_VERS_MINOR,	      \
 				        H5_VERS_RELEASE)