Transfer doxygen H5O RM blocks from doxygen branch to develop. (#174)

Co-authored-by: vchoi <vchoi@jelly.ad.hdfgroup.org>

13 files changed, 2662 insertions, 322 deletions

diff --git a/doxygen/dox/H5Oget_info.dox b/doxygen/dox/H5Oget_info.dox
index e8b7afa..ee4cd1c 100644
--- a/doxygen/dox/H5Oget_info.dox
+++ b/doxygen/dox/H5Oget_info.dox
@@ -1,10 +1,10 @@
 /**
  * \ingroup H5O
- * \def H5Oget_info()
+ * \def H5Oget_info
  *
  * #H5Oget_info is a macro that is mapped to:
- * \li H5Oget_info3()
- * \li H5Oget_info1()
+ * \li #H5Oget_info3
+ * \li #H5Oget_info1
  *
  * \details Such macros are provided to facilitate application
  *          compatibility. Their use and mappings are fully described in
@@ -12,8 +12,8 @@
  *          document closely.
  *
  *          In HDF5 versions 1.12 and after, #H5Oget_info is mapped to
- *          \ref H5Oget_info3() and \ref H5Oget_info1() is deprecated. 
- *          In version 1.10 #H5Oget_info is identical to \ref H5Oget_info1(). 
+ *          #H5Oget_info3 and #H5Oget_info1 is deprecated. 
+ *          In version 1.10 #H5Oget_info is identical to #H5Oget_info1. 
  * 
  *          Specific compile-time compatibility flags and the resulting
  *          mappings are as follows:
@@ -22,100 +22,51 @@
  *  <tr>
  *      <th>Compatibility setting</th>
  *      <th>H5Oget_info</th>
- * </tr>
- *  <tr>
- *      <td>No compatibility flag</td>
- *      <td>\ref H5Oget_info3() (in release 1.12)</td>
  *  </tr>
  *  <tr>
-        <td></td>
- *      <td>\ref H5Oget_info1() (in 1.8 or 1.10)</td>
+ *      <td>No compatibility flag \n &nbsp;</td>
+ *      <td>#H5Oget_info3 (in release 1.12) \n
+ *          #H5Oget_info1 (in 1.8 or 1.10)</td>
  *  </tr>
  *  <tr>
  *      <td>Emulate Release 1.12</td>
- *      <td>\ref H5Oget_info3()</td>
+ *      <td>#H5Oget_info3</td>
  *  </tr>
  *  <tr>
  *      <td>Emulate Release 1.10/1.8 interface</td>
- *      <td>\ref H5Oget_info1()</td>
+ *      <td>#H5Oget_info1</td>
  *  </tr>
  * </table>
  *
  * \note    If you are iterating through a lot of different objects to
- *          retrieve information via the H5Oget_info() family of routines,
+ *          retrieve information via the #H5Oget_info family of routines,
  *          you may see memory building up. This can be due to memory
  *          allocation for metadata such as object headers and messages
  *          when the iterated objects are put into the metadata cache.
  * \note
  *          If the memory buildup is not desirable, you can configure a
- *          smaller cache via H5Fset_mdc_config() or set the file access
- *          property list via H5Pset_mdc_config(). A smaller sized cache
+ *          smaller cache via #H5Fset_mdc_config or set the file access
+ *          property list via #H5Pset_mdc_config. A smaller sized cache
  *          will force metadata entries to be evicted from the cache,
  *          thus freeing the memory associated with the entries.
  *
- * \todo    Fix reference to the document
+ * \version 1.12.0 The macro #H5Oget_info and the function #H5Oget_info3 
+ *                 were added, and #H5Oget_info1 was deprecated.
+ * \version 1.10.5 The macro #H5Oget_info was removed.  The functions 
+ *                 #H5Oget_info1 and #H5Oget_info are identical 
+ *                 in this release.  This change was added to restore the 
+ *                 broken API compatibility introduced in HDF5-1.10.3.
+ * \version 1.10.3 The function #H5Oget_info was renamed 
+ *                 #H5Oget_info1.  The macro #H5Oget_info and the function 
+ *                 #H5Oget_info2 were introduced in this release.
+ * \version 1.8.15 Added a note about the valid values for the \c version field 
+ *                 in the H5O_hdr_info_t structure.
+ * \version 1.8.11 Fortran subroutine introduced in this release.
+ * \version 1.8.10 Added #H5O_type_t structure to the Description section.
+ *                 Separated H5O_hdr_info_t structure from 
+ *                 #H5O_info_t in the Description section.  Clarified the 
+ *                 definition and implementation of the time fields.
  *
- * \par Version
- * <table>
- * <tr>
- *      <th>Release</th>
- *      <th>Change</th>
- * </tr>
- *  <tr>
- *      <td>1.12.0</td>
- *      <td>The macro #H5Oget_info and the function \ref H5Oget_info3() were added, 
- *          and \ref H5Oget_info1() was deprecated.</td>
- *  </tr>
- *  <tr>
- *      <td>1.10.5</td>
- *      <td>The macro #H5Oget_info was removed.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The functions \ref H5Oget_info1() and
- *          #H5Oget_info are identical in this release.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>This change was added to restore the broken API compatibility 
- *          introduced in HDF5-1.10.3.</td>
- *  </tr>
- *  <tr>
- *      <td>1.10.3</td>
- *      <td>The function \ref H5Oget_info() was renamed \ref H5Oget_info1.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The macro #H5Oget_info and the function \ref H5Oget_info2() were 
- *          introduced in this release.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.15</td>
- *      <td>Added a note about the valid values for the \c version field in 
- *          the \ref H5O_hdr_info_t structure.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.11</td>
- *      <td>Fortran subroutine introduced in this release.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.10</td>
- *      <td>Added \ref H5O_type_t structure to the Description section.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>Separated \ref H5O_hdr_info_t structure from \ref H5O_info_t 
- *          in the Description section.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>Clarified the definition and implementation of the time fields.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.0</td>
- *      <td>Function introduced in this release.</td>
- *  </tr>
- * </table>
+ * \since 1.8.0
  *
- * 
  */
diff --git a/doxygen/dox/H5Oget_info_by_idx.dox b/doxygen/dox/H5Oget_info_by_idx.dox
index 2598374..49b8031 100644
--- a/doxygen/dox/H5Oget_info_by_idx.dox
+++ b/doxygen/dox/H5Oget_info_by_idx.dox
@@ -1,10 +1,10 @@
 /**
  * \ingroup H5O
- * \def H5Oget_info_by_idx()
+ * \def H5Oget_info_by_idx
  *
  * #H5Oget_info_by_idx is a macro that is mapped to:
- * \li H5Oget_info_by_idx3()
- * \li H5Oget_info_by_idx1()
+ * \li #H5Oget_info_by_idx3
+ * \li #H5Oget_info_by_idx1
  *
  * \details Such macros are provided to facilitate application
  *          compatibility. Their use and mappings are fully described in
@@ -12,8 +12,8 @@
  *          document closely.
  *
  *          In HDF5 versions 1.12 and after, #H5Oget_info_by_idx is mapped to
- *          \ref H5Oget_info_by_idx3() and \ref H5Oget_info_by_idx1() is deprecated. 
- *          In version 1.10 #H5Oget_info_by_idx is identical to \ref H5Oget_info_by_idx1(). 
+ *          #H5Oget_info_by_idx3 and #H5Oget_info_by_idx1 is deprecated. 
+ *          In version 1.10 #H5Oget_info_by_idx is identical to #H5Oget_info_by_idx1. 
  * 
  *          Specific compile-time compatibility flags and the resulting
  *          mappings are as follows:
@@ -23,70 +23,33 @@
  *  <tr>
  *      <th>Compatibility setting</th>
  *      <th>H5Oget_info_by_idx</th>
- * </tr>
- *  <tr>
- *      <td>No compatibility flag</td>
- *      <td>\ref H5Oget_info_by_idx3() for 1.12</td>
  *  </tr>
  *  <tr>
-        <td></td>
- *      <td>\ref H5Oget_info_by_idx1() for 1.8/1.10</td>
+ *      <td>No compatibility flag \n &nbsp;</td>
+ *      <td>#H5Oget_info_by_idx3 for 1.12 \n
+ *          #H5Oget_info_by_idx1 for 1.8/1.10</td>
  *  </tr>
  *  <tr>
  *      <td>Emulate Release 1.12</td>
- *      <td>\ref H5Oget_info_by_idx3()</td>
+ *      <td>#H5Oget_info_by_idx3</td>
  *  </tr>
  *  <tr>
  *      <td>Emulate Release 1.10/1.8 interface</td>
- *      <td>\ref H5Oget_info_by_idx1()</td>
+ *      <td>#H5Oget_info_by_idx1</td>
  *  </tr>
  * </table>
  *
- * \todo    Fix reference to the document
+ * \version 1.12.0 The macro #H5Oget_info_by_idx and function #H5Oget_info_by_idx3 were added, 
+ *                 and #H5Oget_info_by_idx1 was deprecated.
+ * \version 1.10.5 The macro #H5Oget_info_by_idx was removed.  The functions 
+ *                 #H5Oget_info_by_idx and #H5Oget_info_by_idx1 are 
+ *                 identical in this release.  This change was added to restore the 
+ *                 broken API compatibility introduced in HDF5-1.10.3.
+ * \version 1.10.3 The function #H5Oget_info_by_idx was renamed #H5Oget_info_by_idx1.
+ *                 The macro #H5Oget_info_by_idx and the function #H5Oget_info_by_idx2 
+ *                 were introduced in this release.
+ * \version 1.8.11 Fortran subroutine introduced in this release.
  *
- * \par Version
- * <table>
- * <tr>
- *      <th>Release</th>
- *      <th>Change</th>
- * </tr>
- *  <tr>
- *      <td>1.12.0</td>
- *      <td>The macro #H5Oget_info_by_idx and function \ref H5Oget_info_by_idx3() were added, 
- *          and \ref H5Oget_info_by_idx1() was deprecated.</td>
- *  </tr>
- *  <tr>
- *      <td>1.10.5</td>
- *      <td>The macro #H5Oget_info_by_idx was removed.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The functions \ref H5Oget_info_by_idx() and
- *          H5Oget_info_by_idx1() are identical in this release.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>This change was added to restore the broken API compatibility 
- *          introduced in HDF5-1.10.3.</td>
- *  </tr>
- *  <tr>
- *      <td>1.10.3</td>
- *      <td>The function \ref H5Oget_info_by_idx() was renamed \ref H5Oget_info_by_idx1.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The macro #H5Oget_info_by_idx and the function \ref H5Oget_info_by_idx2() were 
- *          introduced in this release.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.11</td>
- *      <td>Fortran subroutine introduced in this release.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.0</td>
- *      <td>Function introduced in this release.</td>
- *  </tr>
- * </table>
+ * \since 1.8.0
  *
- * 
  */
diff --git a/doxygen/dox/H5Oget_info_by_name.dox b/doxygen/dox/H5Oget_info_by_name.dox
index b1b9540..18f7d28 100644
--- a/doxygen/dox/H5Oget_info_by_name.dox
+++ b/doxygen/dox/H5Oget_info_by_name.dox
@@ -1,10 +1,10 @@
 /**
  * \ingroup H5O
- * \def H5Oget_info_by_name()
+ * \def H5Oget_info_by_name
  *
  * #H5Oget_info_by_name is a macro that is mapped to:
- * \li H5Oget_info_by_name3()
- * \li H5Oget_info_by_name1()
+ * \li #H5Oget_info_by_name3
+ * \li #H5Oget_info_by_name1
  *
  * \details Such macros are provided to facilitate application
  *          compatibility. Their use and mappings are fully described in
@@ -12,9 +12,9 @@
  *          document closely.
  *
  *          In HDF5 versions 1.12 and after, #H5Oget_info_by_name is mapped to
- *          \ref H5Oget_info_by_name3().  In version 1.10 #H5Oget_info_by_name is
- *          identical to \ref H5Oget_info_by_name1().
- *
+ *          #H5Oget_info_by_name3.  In version 1.10 #H5Oget_info_by_name is 
+ *          identical to #H5Oget_info_by_name1. 
+ * 
  *          Specific compile-time compatibility flags and the resulting
  *          mappings are as follows:
  *
@@ -23,77 +23,36 @@
  *  <tr>
  *      <th>Compatibility setting</th>
  *      <th>H5Oget_info_by_name</th>
- * </tr>
- *  <tr>
- *      <td>No compatibility flag</td>
- *      <td>\ref H5Oget_info_by_name3() for 1.12 and above</td>
  *  </tr>
  *  <tr>
-        <td></td>
- *      <td>\ref H5Oget_info_by_name1() for 1.8 or 1.10</td>
+ *      <td>No compatibility flag \n &nbsp;</td>
+ *      <td>#H5Oget_info_by_name3 for 1.12 and above \n
+ *          #H5Oget_info_by_name1 for 1.8 or 1.10</td>
  *  </tr>
  *  <tr>
  *      <td>Emulate Release 1.12</td>
- *      <td>\ref H5Oget_info_by_name3()</td>
+ *      <td>#H5Oget_info_by_name3</td>
  *  </tr>
  *  <tr>
  *      <td>Emulate Release 1.10 or 1.8 interface</td>
- *      <td>\ref H5Oget_info_by_name1()</td>
- *  </tr>
- * </table>
- *
- * \todo    Fix reference to the document; exchange 1.8.8 and 1.8.0
- *
- * \par Version
- * <table>
- * <tr>
- *      <th>Release</th>
- *      <th>Change</th>
- * </tr>
- *  <tr>
- *      <td>1.12.0</td>
- *      <td>The macro #H5Oget_info_by_name and function \ref H5Oget_info_by_name3() were added
- *          and \ref H5Oget_info_by_name1() was deprecated.</td>
- *  </tr>
- *  <tr>
- *      <td>1.10.5</td>
- *      <td>The macro #H5Oget_info_by_name was removed.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The functions \ref H5Oget_info_by_name() and
- *          H5Oget_info_by_name1() are identical in this release.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>This change was added to restore the broken API compatibility
- *          introduced in HDF5-1.10.3.</td>
- *  </tr>
- *  <tr>
- *      <td>1.10.3</td>
- *      <td>The function \ref H5Oget_info_by_name() was renamed
- *          to \ref H5Oget_info_by_name1.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The macro #H5Oget_info_by_name was renamed to
- *          \ref H5Oget_info_by_name1().</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The macro #H5Oget_info_by_name and the function \ref H5Oget_info_by_name2()
- *          were introduced in this release.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.8</td>
- *      <td>Fortran 2003 subroutine and \ref H5O_info_t derived
- *          type introduced in this release.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.0</td>
- *      <td>C function introduced in this release.</td>
+ *      <td>#H5Oget_info_by_name1</td>
  *  </tr>
  * </table>
  *
+ * \version 1.12.0 The macro #H5Oget_info_by_name and function 
+ *                 #H5Oget_info_by_name3 were added and 
+ *                 #H5Oget_info_by_name1 was deprecated.
+ * \version 1.10.5 The macro #H5Oget_info_by_name was removed.  The functions 
+ *                 #H5Oget_info_by_name and #H5Oget_info_by_name1 are 
+ *                 identical in this release.  This change was added to restore 
+ *                 the broken API compatibility introduced in HDF5-1.10.3.
+ * \version 1.10.3 The function #H5Oget_info_by_name was renamed 
+ *                 to #H5Oget_info_by_name1.  The macro #H5Oget_info_by_name 
+ *                 and the function #H5Oget_info_by_name2 were introduced 
+ *                 in this release.
+ * \version 1.8.8 Fortran 2003 subroutine and \c h5o_info_t derived 
+ *                type introduced in this release.</td>
+ *
+ * \since 1.8.0
  *
  */
diff --git a/doxygen/dox/H5Ovisit.dox b/doxygen/dox/H5Ovisit.dox
index 5030a13..1e2a3ea 100644
--- a/doxygen/dox/H5Ovisit.dox
+++ b/doxygen/dox/H5Ovisit.dox
@@ -1,19 +1,19 @@
 /**
  * \ingroup H5O
- * \def H5Ovisit()
+ * \def H5Ovisit
  *
  * #H5Ovisit is a macro that is mapped to one of the following:
- * \li H5Ovisit3()
- * \li H5Ovisit1()
+ * \li #H5Ovisit3
+ * \li #H5Ovisit1
  *
  * \details Such macros are provided to facilitate application
  *          compatibility. Their use and mappings are fully described in
  *          API Compatibility Macros in HDF5; we urge you to read that
  *          document closely.
  *
- *          In HDF5 versions 1.12 and after, \ref H5Ovisit() is mapped to 
- *          \ref H5Ovisit3().  In version 1.10, \ref H5Ovisit() is identical 
- *          to \ref H5Ovisit1().
+ *          In HDF5 versions 1.12 and after, #H5Ovisit is mapped to 
+ *          #H5Ovisit3.  In version 1.10, #H5Ovisit is identical 
+ *          to #H5Ovisit1.
  *
  *          Specific compile-time compatibility flags and the resulting
  *          mappings are as follows:
@@ -23,70 +23,33 @@
  *  <tr>
  *      <th>Compatibility settings</th>
  *      <th>H5Ovisit</th>
- * </tr>
- *  <tr>
- *      <td>No compatibility flag</td>
- *      <td>\ref H5Ovisit3() in 1.12 or after</td>
  *  </tr>
  *  <tr>
-        <td></td>
- *      <td>\ref H5Ovisit1() for 1.8 and 1.10</td>
+ *      <td>No compatibility flag \n &nbsp;</td>
+ *      <td>#H5Ovisit3 in 1.12 or after \n 
+ *          #H5Ovisit1 for 1.8 and 1.10</td>
  *  </tr>
  *  <tr>
  *      <td>Emulate Release 1.12</td>
- *      <td>\ref H5Ovisit3()</td>
+ *      <td>#H5Ovisit3</td>
  *  </tr>
  *  <tr>
  *      <td>Emulate Release 1.10 or 1.8 interface</td>
- *      <td>\ref H5Ovisit1()</td>
+ *      <td>#H5Ovisit1</td>
  *  </tr>
  * </table>
  *
- * \todo    Fix reference to the document
+ * \version 1.12.0 The macro #H5Ovisit and function #H5Ovisit3 were added, 
+ *                 and #H5Ovisit1 was deprecated.
+ * \version 1.10.5 The macro #H5Ovisit was removed.  The functions 
+ *                 #H5Ovisit and #H5Ovisit1 are identical in this release.
+ *                 This change was added to restore the broken API compatibility 
+ *                 introduced in HDF5-1.10.3.
+ * \version 1.10.3 The function #H5Ovisit was renamed to #H5Ovisit1.
+ *                 The macro #H5Ovisit and the function #H5Ovisit2 were 
+ *                 introduced in this release.
+ * \version 1.8.8 Fortran subroutine and data structure added.
  *
- * \par Version
- * <table>
- *  <tr>
- *      <th>Release</th>
- *      <th>Change</th>
- * </tr>
- *  <tr>
- *      <td>1.12.0</td>
- *      <td>The macro #H5Ovisit and function \ref H5Ovisit3() were added, 
- *          and \ref H5Ovisit1() was deprecated.</td>
- *  </tr>
- *  <tr>
- *      <td>1.10.5</td>
- *      <td>The macro #H5Ovisit was removed.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The functions \ref H5Ovisit() and
- *          H5Ovisit1() are identical in this release.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>This change was added to restore the broken API compatibility 
- *          introduced in HDF5-1.10.3.</td>
- *  </tr>
- *  <tr>
- *      <td>1.10.3</td>
- *      <td>The function \ref H5Ovisit() was renamed to \ref H5Ovisit1.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The macro #H5Ovisit and the function \ref H5Ovisit2() were 
- *          introduced in this release.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.8</td>
- *      <td>Fortran subroutine and data structure added.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.0</td>
- *      <td>C function introduced.</td>
- *  </tr>
- * </table>
+ * \since 1.8.0
  *
- * 
  */
diff --git a/doxygen/dox/H5Ovisit_by_name.dox b/doxygen/dox/H5Ovisit_by_name.dox
index 5c6e51a..2ba4846 100644
--- a/doxygen/dox/H5Ovisit_by_name.dox
+++ b/doxygen/dox/H5Ovisit_by_name.dox
@@ -1,19 +1,19 @@
 /**
  * \ingroup H5O
- * \def H5Ovisit_by_name()
+ * \def H5Ovisit_by_name
  *
  * #H5Ovisit_by_name is a macro that is mapped to one of the following:
- * \li H5Ovisit_by_name3()
- * \li H5Ovisit_by_name1()
+ * \li #H5Ovisit_by_name3
+ * \li #H5Ovisit_by_name1
  *
  * \details Such macros are provided to facilitate application
  *          compatibility. Their use and mappings are fully described in
  *          API Compatibility Macros in HDF5; we urge you to read that
  *          document closely.
  *
- *          In HDF5 versions 1.12 and after, \ref H5Ovisit_by_name() is mapped to 
- *          \ref H5Ovisit_by_name3().  In version 1.10, \ref H5Ovisit_by_name() 
- *          is identical to \ref H5Ovisit_by_name1().
+ *          In HDF5 versions 1.12 and after, #H5Ovisit_by_name is mapped to 
+ *          #H5Ovisit_by_name3.  In version 1.10, #H5Ovisit_by_name
+ *          is identical to #H5Ovisit_by_name1.
  *
  *          Specific compile-time compatibility flags and the resulting
  *          mappings are as follows:
@@ -23,70 +23,32 @@
  *  <tr>
  *      <th>Compatibility settings</th>
  *      <th>H5Ovisit_by_name</th>
- * </tr>
- *  <tr>
- *      <td>No compatibility flag</td>
- *      <td>\ref H5Ovisit_by_name3() for 1.12 and above</td>
  *  </tr>
  *  <tr>
-        <td></td>
- *      <td>\ref H5Ovisit_by_name1() for 1.10 or 1.8</td>
+ *      <td>No compatibility flag \n &nbsp;</td>
+ *      <td>#H5Ovisit_by_name3 for 1.12 and above \n
+ *          #H5Ovisit_by_name1 for 1.10 or 1.8</td>
  *  </tr>
  *  <tr>
  *      <td>Emulate Release 1.12 interface</td>
- *      <td>\ref H5Ovisit_by_name3()</td>
+ *      <td>#H5Ovisit_by_name3</td>
  *  </tr>
  *  <tr>
  *      <td>Emulate Release 1.10 or 1.8 interface</td>
- *      <td>\ref H5Ovisit_by_name1()</td>
+ *      <td>#H5Ovisit_by_name1</td>
  *  </tr>
  * </table>
  *
- * \todo Fix reference to the document
+ * \version 1.12.0 The macro #H5Ovisit_by_name and function #H5Ovisit_by_name3 were added.
+ * \version 1.10.5 The macro #H5Ovisit_by_name was removed.  The functions 
+ *                 #H5Ovisit_by_name and #H5Ovisit_by_name1 are identical 
+ *                 in this release.  This change was added to restore the 
+ *                 broken API compatibility introduced in HDF5-1.10.3.
+ * \version 1.10.3 The function #H5Ovisit_by_name was renamed to #H5Ovisit_by_name1.
+ *                 The macro #H5Ovisit_by_name and the function #H5Ovisit_by_name2 
+ *                 were introduced in this release.
+ * \version 1.8.8 Fortran subroutine introduced in this release.
  *
- * \par Version
- * <table>
- *  <tr>
- *      <th>Release</th>
- *      <th>Change</th>
- * </tr>
- *  <tr>
- *      <td>1.12.0</td>
- *      <td>The macro #H5Ovisit_by_name and function \ref H5Ovisit_by_name3() were added.
- *  </tr>
- *  <tr>
- *      <td>1.10.5</td>
- *      <td>The macro #H5Ovisit_by_name was removed.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The functions \ref H5Ovisit_by_name() and
- *          H5Ovisit_by_name1() are identical in this release.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>This change was added to restore the broken API compatibility 
- *          introduced in HDF5-1.10.3.</td>
- *  </tr>
- *  <tr>
- *      <td>1.10.3</td>
- *      <td>The function \ref H5Ovisit_by_name() was renamed 
- *          to \ref H5Ovisit_by_name1.</td>
- *  </tr>
- *  <tr>
- *      <td></td>
- *      <td>The macro #H5Ovisit_by_name and the function \ref H5Ovisit_by_name2() 
- *          were introduced in this release.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.8</td>
- *      <td>Fortran subroutine introduced in this release.</td>
- *  </tr>
- *  <tr>
- *      <td>1.8.0</td>
- *      <td>Function introduced in this release.</td>
- *  </tr>
- * </table>
+ * \since 1.8.0
  *
- * 
  */
diff --git a/examples/h5_attribute.c b/examples/h5_attribute.c
index 7a619f9..e127e40 100644
--- a/examples/h5_attribute.c
+++ b/examples/h5_attribute.c
@@ -184,6 +184,8 @@ main(void)
     printf("The value of the attribute \"Integer attribute\" is %d \n", point_out);
     ret = H5Aclose(attr);
 
+//! [H5Oget_info3_snip]
+
     /*
      * Find string attribute by iterating through all attributes
      */
@@ -203,6 +205,7 @@ main(void)
         ret = H5Tclose(atype);
     }
 
+//! [H5Oget_info3_snip]
     /*
      * Get attribute info using iteration function.
      */
diff --git a/examples/h5_extlink.c b/examples/h5_extlink.c
index 15f76fb..bdd8b2f 100644
--- a/examples/h5_extlink.c
+++ b/examples/h5_extlink.c
@@ -414,10 +414,15 @@ UD_hard_create(const char *link_name, hid_t loc_group, const void *udata, size_t
 
     token = *((H5O_token_t *)udata);
 
+//! [H5Open_by_token_snip]
+
     /* Open the object this link points to so that we can increment
      * its reference count. This also ensures that the token passed
      * in points to a real object (although this check is not perfect!) */
     target_obj = H5Oopen_by_token(loc_group, token);
+
+//! [H5Open_by_token_snip]
+
     if (target_obj < 0) {
         ret_value = -1;
         goto done;
diff --git a/src/H5Omodule.h b/src/H5Omodule.h
index 9d3818d..5ebd7b0 100644
--- a/src/H5Omodule.h
+++ b/src/H5Omodule.h
@@ -29,4 +29,10 @@
 #define H5_MY_PKG_ERR  H5E_OHDR
 #define H5_MY_PKG_INIT YES
 
+/**\defgroup H5O H5O
+ * \brief Object Interface
+ *
+ * \todo Describe concisely what the functions in this module are about.
+ *
+ */
 #endif /* _H5Omodule_H */
diff --git a/src/H5Opublic.h b/src/H5Opublic.h
index 2d2abdf..340f8d7 100644
--- a/src/H5Opublic.h
+++ b/src/H5Opublic.h
@@ -90,10 +90,14 @@
  * Theses flags determine which fields will be filled in in the H5O_native_info_t
  * struct.
  */
+//! [H5O_native_info_fields_snip]
+
 #define H5O_NATIVE_INFO_HDR       0x0008u /* Fill in the hdr field */
 #define H5O_NATIVE_INFO_META_SIZE 0x0010u /* Fill in the meta_size field */
 #define H5O_NATIVE_INFO_ALL       (H5O_NATIVE_INFO_HDR | H5O_NATIVE_INFO_META_SIZE)
 
+//! [H5O_native_info_fields_snip]
+
 /* Convenience macro to check if the token is the 'undefined' token value */
 #define H5O_IS_TOKEN_UNDEF(token) (!HDmemcmp(&(token), &(H5O_TOKEN_UNDEF), sizeof(H5O_token_t)))
 
@@ -101,6 +105,8 @@
 /* Public Typedefs */
 /*******************/
 
+//! [H5O_type_t_snip]
+
 /* Types of objects in file */
 typedef enum H5O_type_t {
     H5O_TYPE_UNKNOWN = -1,   /* Unknown object type		*/
@@ -111,7 +117,11 @@ typedef enum H5O_type_t {
     H5O_TYPE_NTYPES          /* Number of different object types (must be last!) */
 } H5O_type_t;
 
+//! [H5O_type_t_snip]
+
 /* Information struct for object header metadata (for H5Oget_info/H5Oget_info_by_name/H5Oget_info_by_idx) */
+//! [H5O_hdr_info_t_snip]
+
 typedef struct H5O_hdr_info_t {
     unsigned version; /* Version number of header format in file */
     unsigned nmesgs;  /* Number of object header messages */
@@ -129,6 +139,10 @@ typedef struct H5O_hdr_info_t {
     } mesg;
 } H5O_hdr_info_t;
 
+//! [H5O_hdr_info_t_snip]
+
+//! [H5O_info2_t_snip]
+
 /* Data model information struct for objects */
 /* (For H5Oget_info / H5Oget_info_by_name / H5Oget_info_by_idx version 3) */
 typedef struct H5O_info2_t {
@@ -143,6 +157,10 @@ typedef struct H5O_info2_t {
     hsize_t       num_attrs; /* # of attributes attached to object   */
 } H5O_info2_t;
 
+//! [H5O_info2_t_snip]
+
+//! [H5O_native_info_t_snip]
+
 /* Native file format information struct for objects */
 /* (For H5Oget_native_info / H5Oget_native_info_by_name / H5Oget_native_info_by_idx) */
 typedef struct H5O_native_info_t {
@@ -154,12 +172,18 @@ typedef struct H5O_native_info_t {
     } meta_size;
 } H5O_native_info_t;
 
+//! [H5O_native_info_t_snip]
+
 /* Typedef for message creation indexes */
 typedef uint32_t H5O_msg_crt_idx_t;
 
 /* Prototype for H5Ovisit/H5Ovisit_by_name() operator (version 3) */
+//! [H5O_iterate2_t_snip]
+
 typedef herr_t (*H5O_iterate2_t)(hid_t obj, const char *name, const H5O_info2_t *info, void *op_data);
 
+//! [H5O_iterate2_t_snip]
+
 typedef enum H5O_mcdt_search_ret_t {
     H5O_MCDT_SEARCH_ERROR = -1, /* Abort H5Ocopy */
     H5O_MCDT_SEARCH_CONT, /* Continue the global search of all committed datatypes in the destination file */
@@ -182,64 +206,1621 @@ typedef H5O_mcdt_search_ret_t (*H5O_mcdt_search_cb_t)(void *op_data);
 extern "C" {
 #endif
 
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Opens an object in an HDF5 file by location identifier and path name.
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] name Path to the object; relative to \p loc_id
+ * \lapl_id
+ *
+ * \return \hid_tv{object}
+ *
+ * \details H5Oopen() opens a group, dataset, or committed (named) datatype
+ *          specified by a location, \p loc_id, and a path name, \p name, in an HDF5 file.
+ *
+ *          This function opens the object in the same manner as H5Gopen(), H5Topen(), and H5Dopen().
+ *          However, H5Oopen() does not require the type of object to be known beforehand.  
+ *          This can be useful with user-defined links, for instance, when only a path may be known.
+ *
+ *          H5Oopen() cannot be used to open a dataspace, attribute, property list, or file.
+ *
+ *          Once an object of unknown type has been opened with H5Oopen(), 
+ *          the type of that object can be determined by means of an H5Iget_type() call.
+ *
+ *          \p loc_id may be a file, group, dataset, named datatype, or attribute.
+ *          If an attribute is specified for \p loc_id then the object where the 
+ *          attribute is attached will be accessed.
+ *
+ *          \p name must be the path to that object relative to \p loc_id.
+ *
+ *          \p lapl_id is the link access property list associated with the link pointing to 
+ *          the object.  If default link access properties are appropriate, this can be 
+ *          passed in as #H5P_DEFAULT.
+ *
+ *          When it is no longer needed, the opened object should be closed with
+ *          H5Oclose(), H5Gclose(), H5Tclose(), or H5Dclose().
+ *
+ * \version 1.8.1 Fortran subroutine introduced in this release.
+ *
+ * \since 1.8.0 
+ *
+ */
 H5_DLL hid_t H5Oopen(hid_t loc_id, const char *name, hid_t lapl_id);
 H5_DLL hid_t H5Oopen_async(const char *app_file, const char *app_func, unsigned app_line, hid_t loc_id,
                            const char *name, hid_t lapl_id, hid_t es_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Opens an object in an HDF5 file using its VOL independent token
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] token Object token
+ *
+ * \return \hid_ti{object}
+ *
+ * \details H5Oopen_by_token() opens an object specified by the object 
+ *          identifier, \p loc_id and object token, \p token.
+ *
+ * \par Example
+ *      An example snippet from examples/h5_extlink.c:
+ *      \snippet h5_extlink.c H5Open_by_token_snip
+ *
+ * \since 1.12.0 
+ *
+ */
 H5_DLL hid_t H5Oopen_by_token(hid_t loc_id, H5O_token_t token);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Opens the nth object in a group
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] group_name Name of group, relative to \p loc_id, in which object is located
+ * \idx_type
+ * \order
+ * \param[in] n Object to open
+ * \lapl_id
+ *
+ * \return \hid_tv{object}
+ *
+ * \details H5Open_by_idx() opens the nth object in the group specified by \p loc_id 
+ *          and \p group_name.
+ *
+ *          \p loc_id specifies a location identifier.  \p group_name specifies the group relative to
+ *          \p loc_id in which the object can be found.  If \p loc_id fully specifies the group 
+ *          in which the object resides, \p group_name can be a dot (.).
+ *
+ *          The specific object to be opened within the group is specified by the three parameters:
+ *          \p idx_type, \p order and \p n.
+ *
+ *          \p idx_type specifies the type of index by which objects are ordered.
+ *          Valid index types include the following:
+ *
+ *          \indexes
+ *
+ *          \p order specifies the order in which the objects are to be referenced for the purposes 
+ *          of this function.  Valid orders include the following:
+ *
+ *          \orders
+ *
+ *          Note that for #H5_ITER_NATIVE, rather than implying a particular order, 
+ *          it instructs the HDF5 library to iterate through the objects in the fastest 
+ *          available order, i.e., in a natural order.
+ * 
+ *          \p n specifies the position of the object within the index.  Note that this count is 
+ *          zero-based; 0 (zero) indicates that the function will return the value of the first object; 
+ *          if \p n is 5, the function will return the value of the sixth object; etc.
+ *
+ *          \p lapl_id specifies the link access property list to be used in accessing the object.
+ *
+ *          An object opened with this function should be closed when it is no longer needed so that 
+ *          resource leaks will not develop.  H5Oclose() can be used to close groups, datasets,
+ *          or committed datatypes.
+ *
+ * \version 1.8.1 Fortran subroutine introduced in this release.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL hid_t H5Oopen_by_idx(hid_t loc_id, const char *group_name, H5_index_t idx_type, H5_iter_order_t order,
                             hsize_t n, hid_t lapl_id);
 H5_DLL hid_t H5Oopen_by_idx_async(const char *app_file, const char *app_func, unsigned app_line, hid_t loc_id,
                                   const char *group_name, H5_index_t idx_type, H5_iter_order_t order,
                                   hsize_t n, hid_t lapl_id, hid_t es_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Determines whether a link resolves to an actual object.
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] name The name of the link to check
+ * \lapl_id
+ *
+ * \return Returns a positive value if the object pointed to by the \p loc_id and \p name combination exists. 
+ * \return Returns 0 if the object pointed to by the \p loc_id and \p name combination does not exist.
+ * \return Returns a negatvie value when the function fails.
+ *
+ * \details H5Oexists_by_name() allows an application to determine whether
+ *          the link \p name in the group or file specified with \p loc_id
+ *          resolves to an HDF5 object to open or if the link dangles. The
+ *          link may be of any type, but hard links will always resolve
+ *          to objects and do not need to be verified.
+ *
+ *          Note that H5Oexists_by_name() verifies only that the target
+ *          object exists. If \p name includes either a relative path or
+ *          an absolute path to the target link, intermediate steps
+ *          along the path must be verified before the existence of
+ *          the target link can be safely checked. If the path is not
+ *          verified and an intermediate element of the path does not
+ *          exist, H5Oexists_by_name() will fail. The example in the next
+ *          paragraph illustrates one step-by-step method for verifying
+ *          the existence of a link with a relative or absolute path.
+ *
+ * \par Example
+ *          Use the following steps to verify the existence of
+ *          the link \c datasetD in the \c group group1/group2/softlink_to_group3/,
+ *          where \c group1 is a member of the group specified by \c loc_id:
+ *
+ * \par
+ *      - First use H5Lexists() to verify that a link named \c group1 exists.
+ *      - If \c group1 exists, use H5Oexists_by_name() to verify that the
+ *        link \c group1 resolves to an object.
+ *      - If \c group1 exists, use H5Lexists() again, this time with name
+ *        set to \c group1/group2, to verify that the link \c group2 exists
+ *        in \c group1.
+ *      - If the \c group2 link exists, use H5Oexists_by_name() to verify
+ *        that \c group1/group2 resolves to an object.
+ *      - If \c group2 exists, use  H5Lexists() again, this time with name
+ *        set to \c group1/group2/softlink_to_group3, to verify that the
+ *        link \c softlink_to_group3 exists in \c group2.
+ *      - If the \c softlink_to_group3 link exists, use H5Oexists_by_name()
+ *        to verify that \c group1/group2/softlink_to_group3 resolves to
+ *        an object.
+ *      - If \c softlink_to_group3 exists, you can now safely use H5Lexists
+ *        with name set to \c group1/group2/softlink_to_group3/datasetD to
+ *        verify that the target link, \c datasetD, exists.
+ *      - And finally, if the link \c datasetD exists, use H5Oexists_by_name
+ *        to verify that \c group1/group2/softlink_to_group3/datasetD
+ *        resolves to an object.
+ *
+ * \par
+ *          If the link to be verified is specified with an absolute path,
+ *          the same approach should be used, but starting with the first
+ *          link in the file’s root group. For instance, if \c datasetD
+ *          were in \c /group1/group2/softlink_to_group3, the first call to
+ *          H5Lexists() would have name set to \c /group1.
+ *
+ * \par
+ *          Note that this is an outline and does not include all necessary
+ *          details. Depending on circumstances, for example, an application
+ *          may need to verify the type of an object also.
+ *
+ * \warning \Bold{Failure Modes:}
+ * \warning If \p loc_id and \p name both exist but the combination does not
+ *          resolve to an object, the function will return 0 (zero);
+ *          the function does not fail in this case.
+ * \warning If either the location or the link specified by the \p loc_id
+ *          and \p name combination does not exist, the function will fail,
+ *          returning a negative value.
+ * \warning Note that verifying the existence of an object within an HDF5
+ *          file is a multistep process. An application can be certain the
+ *          object does not exist only if H5Lexists()  and H5Oexists_by_name()
+ *          have been used to verify the existence of the links and groups
+ *          in the hierarchy above that object. The example above, in the
+ *          function description, provides a step-by-step description of
+ *          that verification process.
+ *
+ * \version 1.8.11 Fortran subroutine introduced in this release.
+ *
+ * \since 1.8.5
+ *
+ */
 H5_DLL htri_t  H5Oexists_by_name(hid_t loc_id, const char *name, hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves the metadata for an object specified by an identifier
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[out] oinfo Buffer in which to return object information
+ * \param[in] fields Flags specifying the fields to include in \p oinfo
+ *
+ * \return \herr_t
+ *
+ * \details H5Oget_info3() specifies an object by its identifier, \p loc_id , and 
+ *          retrieves the metadata describing that object in \p oinfo , an H5O_info2_t \c struct.
+ *
+ *          The H5O_info2_t \c struct is defined in H5Opublic.h as follows :
+ *          \snippet this H5O_info2_t_snip
+ *
+ *          Note the following about H5O_info2_t :
+ *          - Of the four time fields (\c atime, \c mtime, \c ctime, and \c btime) only \c ctime has been implemented.
+ *          - The \c atime value is the last time the object was read or written.
+ *          - The \c mtime value is the last time the raw data in the object was changed.
+ *          - The \c ctime value is the last time the metadata for the object was changed.
+ *          - The \c btime value is the time the object was created.
+ *
+ *          The H5O_token_t is defined in H5public.h as follows:
+ *          \snippet H5public.h H5O_token_t_snip
+ *
+ *          The H5O_type_t \c enum indicates the object type and 
+ *          is defined in H5Opublic.h as follows:
+ *          \snippet this H5O_type_t_snip
+ *      
+ *          Note that the object retrieved as indicated by \p loc_id
+ *          refers only to the types specified by H5O_type_t.
+ *
+ *          The \p fields parameter contains flags to determine which fields will be filled in 
+ *          the H5O_info2_t \c struct returned in \p oinfo. 
+ *          These flags are defined in the H5Opublic.h file:
+ *
+ *          \obj_info_fields
+ *
+ * \par Example
+ *      An example snippet from examples/h5_attribute.c:
+ * \par
+ *      \snippet h5_attribute.c H5Oget_info3_snip
+ *
+ * \note If you are iterating through a lot of different objects to
+ *       retrieve information via the H5Oget_info() family of routines,
+ *       you may see memory building up. This can be due to memory
+ *       allocation for metadata such as object headers and messages
+ *       when the iterated objects are put into the metadata cache.
+ * \note
+ *       If the memory buildup is not desirable, you can configure a
+ *       smaller cache via H5Fset_mdc_config() or set the file access
+ *       property list via H5Pset_mdc_config(). A smaller sized cache
+ *       will force metadata entries to be evicted from the cache,
+ *       thus freeing the memory associated with the entries.
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Oget_info3(hid_t loc_id, H5O_info2_t *oinfo, unsigned fields);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves the metadata for an object, identifying the object by 
+ *        location and relative name
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] name Name of group, relative to \p loc_id
+ * \param[out] oinfo Buffer in which to return object information
+ * \param[in] fields Flags specifying the fields to include in \p oinfo
+ * \lapl_id
+ *
+ * \return \herr_t
+ *
+ * \details H5Oget_info_by_name3() specifies an object’s location and name, 
+ *          \p loc_id and \p name, respectively, and retrieves the metadata 
+ *          describing that object in \p oinfo, an H5O_info2_t struct.
+ *
+ *          \p oinfo, in which the object information is returned, is a \c struct of
+ *          type H5O_info2_t, which is defined in H5Opublic.h in the HDF5 source code:
+ *
+ *          \snippet this H5O_info2_t_snip
+ *
+ *          Note the following about H5O_info2_t :
+ *          - Of the four time fields (\c atime, \c mtime, \c ctime, and \c btime) only \c ctime has been implemented.
+ *          - The \c atime value is the last time the object was read or written.
+ *          - The \c mtime value is the last time the raw data in the object was changed.
+ *          - The \c ctime value is the last time the metadata for the object was changed.
+ *          - The \c btime value is the time the object was created.
+ *
+ *          The H5O_token_t is defined in H5public.h as follows:
+ *          \snippet H5public.h H5O_token_t_snip
+ *
+ *          The H5O_type_t \c enum indicates the object type and 
+ *          is defined in H5Opublic.h as follows:
+ *          \snippet this H5O_type_t_snip
+ *
+ *          Note that the object retrieved as indicated by \p loc_id
+ *          refers only to the types specified by H5O_type_t.
+ *
+ *          The \p fields parameter contains flags to determine which fields will be filled in 
+ *          the H5O_info2_t \c struct returned in \p oinfo. 
+ *          These flags are defined in the H5Opublic.h file:
+ *
+ *          \obj_info_fields
+ *
+ *          The link access property list, \c lapl_id, is not currently used; 
+ *          it should be passed in as #H5P_DEFAULT.
+ *
+ * \par Example
+ *      An example snippet from test/vol.c:
+ *      \snippet vol.c H5Oget_info_by_name3_snip
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Oget_info_by_name3(hid_t loc_id, const char *name, H5O_info2_t *oinfo, unsigned fields,
                                     hid_t lapl_id);
 H5_DLL herr_t  H5Oget_info_by_name_async(const char *app_file, const char *app_func, unsigned app_line,
                                          hid_t loc_id, const char *name, H5O_info2_t *oinfo /*out*/,
                                          unsigned fields, hid_t lapl_id, hid_t es_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves the metadata for an object, identifying the object 
+ *        by an index position
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] group_name Name of group in which object is located
+ * \idx_type
+ * \order
+ * \param[in] n Position within the index
+ * \param[out] oinfo Buffer in which to return object information
+ * \param[in] fields Flags specifying the fields to include in \p oinfo
+ * \lapl_id
+ *
+ * \return \herr_t
+ *
+ * \details H5Oget_info_by_idx3() retrieves the metadata describing an
+ *          object in the \c struct \p oinfo, as specified by the location,
+ *          \p loc_id, group name, \p group_name, the index by which objects
+ *          in that group are tracked, \p idx_type, the order by which the
+ *          index is to be traversed, \p order, and an object’s position
+ *          \p n within that index.
+ *
+ *          If \p loc_id fully specifies the group in which the object resides,
+ *          \p group_name can be a dot (\c .).
+ *
+ *          \p idx_type is of type #H5_index_t, defined in H5public.h as:
+ *          \snippet H5public.h H5_index_t_snip
+ *
+ *          \p order is of type #H5_iter_order_t defined in H5public.h as:
+ *          \snippet H5public.h H5_iter_order_t_snip
+ *
+ *          \p oinfo, in which the object information is returned, is a \c struct of
+ *          type H5O_info2_t, which is defined in H5Opublic.h in the HDF5 source code:
+ *          \snippet this H5O_info2_t_snip
+ *
+ *          Note the following about H5O_info2_t :
+ *          - Of the four time fields (\c atime, \c mtime, \c ctime, and \c btime) only \c ctime has been implemented.
+ *          - The \c atime value is the last time the object was read or written.
+ *          - The \c mtime value is the last time the raw data in the object was changed.
+ *          - The \c ctime value is the last time the metadata for the object was changed.
+ *          - The \c btime value is the time the object was created.
+ *
+ *          H5O_token_t is defined in H5public.h as follows:
+ *          \snippet H5public.h H5O_token_t_snip
+ *
+ *          The #H5O_type_t \c enum indicates the object type and 
+ *          is defined in H5Opublic.h as follows:
+ *          \snippet this H5O_type_t_snip
+ *
+ *          Note that the object retrieved as indicated by \p loc_id
+ *          refers only to the types specified by #H5O_type_t.
+ *
+ *          The \p fields parameter contains flags to determine which fields will be filled in 
+ *          the H5O_info2_t \c struct returned in \p oinfo. 
+ *          These flags are defined in the H5Opublic.h file:
+ *          \obj_info_fields
+ *
+ *          The link access property list, \c lapl_id, is not currently used; 
+ *          it should be passed in as #H5P_DEFAULT.
+ *
+ * \par Example
+ *      An example snippet from test/titerate.c:
+ *      \snippet titerate.c H5Oget_info_by_idx3_snip
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Oget_info_by_idx3(hid_t loc_id, const char *group_name, H5_index_t idx_type,
                                    H5_iter_order_t order, hsize_t n, H5O_info2_t *oinfo, unsigned fields,
                                    hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieve native file format information about an object
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[out] oinfo Buffer in which to return native object information
+ * \param[in] fields Flags to determine which fields in \p oinfo are filled in
+ *
+ * \return \herr_t
+ *
+ * \details H5Oget_native_info() retrieves the native file format information for an object
+ *          specified by \p loc_id. The information is retrieved into the
+ *          buffer specified by \p oinfo, which is defined as a \c struct of
+ *          type H5O_native_info_t in H5Opublic.h:
+ *
+ *          \snippet this H5O_native_info_t_snip
+ *
+ *          The \p fields parameter indicates which fields to fill in
+ *          H5O_native_info_t. Possible values defined in H5Opublic.h are:
+ *
+ *          \snippet this H5O_native_info_fields_snip
+ *
+ * \par Example
+ *      An example snippet from test/tfile.c:
+ * \par
+ *      \snippet tfile.c H5Oget_native_info_snip
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Oget_native_info(hid_t loc_id, H5O_native_info_t *oinfo, unsigned fields);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieve native file format information about an object given its name
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] name Name of object
+ * \param[out] oinfo Buffer in which to return native object information
+ * \param[in] fields Flags to determine which fields in \p oinfo are filled in
+ * \lapl_id
+ *
+ * \return \herr_t
+ *
+ * \details H5Oget_native_info_by_name() retrieves the native file format information for an object
+ *          specified by \p loc_id and the name \p name. The information is
+ *          retrieved into the buffer specified by \p oinfo, which is defined
+ *          as a \c struct of type H5O_native_info_t in H5Opublic.h:
+ *
+ *          \snippet this H5O_native_info_t_snip
+ *
+ *          The \p fields parameter which fields to fill in H5O_native_info_t.
+ *          Possible values defined in H5Opublic.h are:
+ *
+ *          \snippet this H5O_native_info_fields_snip
+ *
+ * \par Example
+ *      An example snippet from test/tfile.c:
+ *      \snippet tfile.c H5Oget_native_info_by_name_snip
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Oget_native_info_by_name(hid_t loc_id, const char *name, H5O_native_info_t *oinfo,
                                           unsigned fields, hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieve native file format information about an object 
+ *        according to the order of an index
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] group_name Name of group in which object is located
+ * \idx_type
+ * \order
+ * \param[in] n Position within the index
+ * \param[out] oinfo Buffer in which to return native object information
+ * \param[in] fields Flags to determine which fields in \p oinfo are filled in
+ * \lapl_id
+ *
+ * \return \herr_t
+ *
+ * \details H5Oget_native_info_by_idx() retrieves the native file format information for an object
+ *          specified by \p loc_id, group name, \p group_name, the index by which
+ *          objects in the group are tracked, \p idx_type, the order by which
+ *          the index is to be traversed, \p order , and an object's position
+ *          \p n within that index. The information is retrieved into the
+ *          buffer specified by \p oinfo, which is defined as a \c struct of
+ *          type H5O_native_info_t in H5Opublic.h:
+ *          \snippet this H5O_native_info_t_snip
+ *
+ *          \p idx_type is of type #H5_index_t, defined in H5public.h as:
+ *          \snippet H5public.h H5_index_t_snip
+ *
+ *          \p order is of type #H5_iter_order_t defined in H5public.h as:
+ *          \snippet H5public.h H5_iter_order_t_snip
+ *
+ *          The \p fields parameter indicates which fields to fill in H5O_native_info_t.
+ *          Possible values defined in H5Opublic.h are:
+ *          \snippet this H5O_native_info_fields_snip
+ *
+ *          The link access property list, \c lapl_id, is not currently used; 
+ *          it should be passed in as #H5P_DEFAULT.
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Oget_native_info_by_idx(hid_t loc_id, const char *group_name, H5_index_t idx_type,
                                          H5_iter_order_t order, hsize_t n, H5O_native_info_t *oinfo,
                                          unsigned fields, hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Creates a hard link to an object in an HDF5 file
+ *
+ * \param[in] obj_id Object to be linked
+ * \param[in] new_loc_id Location identifier at which object is to be linked; 
+ *                       may be a file, group, dataset, named datatype or attribute identifier.
+ * \param[in] new_name Name of link to be created, relative to \p new_loc_id.
+ * \lcpl_id
+ * \lapl_id
+ *
+ * \return \herr_t
+ *
+ * \details H5Olink() creates a new hard link to an object in an HDF5 file.
+ *          \p new_loc_id and \p \p new_link_name specify the location and name of the
+ *          new link while \p object_id identifies the object that the link
+ *          points to.
+ *
+ *          H5Olink() is designed for two purposes:
+ *          - To create the first hard link to an object that has just
+ *            been created with H5Dcreate_anon(), H5Gcreate_anon(), or
+ *            H5Tcommit_anon().  
+ *          - To add additional structure to an existing
+ *            file so that, for example, an object can be shared among
+ *            multiple groups.
+ *
+ *          \p lcpl and \p lapl are the link creation and access property lists
+ *          associated with the new link.
+ *
+ * \par Example:
+ *      To create a new link to an object while simultaneously creating
+ *      missing intermediate groups: Suppose that an application must
+ *      create the group C with the path /A/B01/C but may not know
+ *      at run time whether the groups A and B01 exist. The following
+ *      code ensures that those groups are created if they are missing:
+ * \par
+ * \code
+ *
+ *      // Creates a link creation property list (LCPL).
+ *      hid_t lcpl_id = H5Pcreate(H5P_LINK_CREATE);  
+ *
+ *      // Sets "create missing intermediate groups" property in that LCPL.
+ *      int status = H5Pset_create_intermediate_group(lcpl_id, TRUE);
+ *
+ *      // Creates a group without linking it into the file structure.
+ *      hid_t gid  = H5Gcreate_anon(file_id, H5P_DEFAULT, H5P_DEFAULT);
+ *
+ *      // Links group into file structure.
+ *      status = H5Olink(gid, file_id, "/A/B01/C", lcpl_id, H5P_DEFAULT);
+ *
+ * \endcode
+ *
+ * \par 
+ *      Note that unless the object is intended to be temporary,
+ *      the H5O_LINK call is mandatory if an object created with one
+ *      of the H5*_CREATE_ANON functions (or with H5T_COMMIT_ANON)
+ *      is to be retained in the file; without an H5O_LINK call,
+ *      the object will not be linked into the HDF5 file structure
+ *      and will be deleted when the file is closed.
+ *
+ * \version 1.8.1 Fortran subroutine introduced in this release.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t  H5Olink(hid_t obj_id, hid_t new_loc_id, const char *new_name, hid_t lcpl_id, hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Increments an object reference count
+ *
+ * \fgdta_loc_obj_id{object_id}
+ *
+ * \return \herr_t
+ *
+ * \details H5Oincr_refcount() increments the hard link reference count for an object.
+ *          It should be used any time a user-defined link that references
+ *          an object by address is added. When the link is deleted,
+ *          H5Odecr_refcount() should be used.
+ *
+ *          An object’s reference count is the number of hard links in the
+ *          file that point to that object. See the “Programming Model”
+ *          section of the HDF5 Groups chapter in the -- <em>HDF5 User’s Guide</em>
+ *          for a more complete discussion of reference counts.
+ *
+ *          If a user application needs to determine an object’s reference
+ *          count, an H5Oget_info() call is required; the reference count
+ *          is returned in the \c rc field of the #H5O_info_t \c struct.
+ *
+ * \warning This function must be used with care! 
+ * \warning Improper use can lead to inaccessible data, wasted space in the file, 
+ *          or <b><em>file corruption</em></b>.
+ *
+ * \version 1.8.11 Fortran subroutine introduced in this release.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t  H5Oincr_refcount(hid_t object_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Decrements an object reference count
+ *
+ * \fgdta_loc_obj_id{object_id}
+ *
+ * \return \herr_t
+ *
+ * \details H5Odecr_refcount() decrements the hard link reference count for an object.
+ *          It should be used any time a user-defined link that references
+ *          an object by address is deleted. In general, H5Oincr_refcount() will have
+ *          been used previously, when the link was created.
+ *
+ *          An object’s reference count is the number of hard links in the
+ *          file that point to that object. See the “Programming Model”
+ *          section of the HDF5 Groups chapter in the <em>HDF5 User’s Guide</em>
+ *          for a more complete discussion of reference counts.
+ *
+ *          If a user application needs to determine an object’s reference
+ *          count, an H5Oget_info() call is required; the reference count
+ *          is returned in the \c rc field of the #H5O_info_t \c struct.
+ *
+ * \warning This function must be used with care! 
+ * \warning Improper use can lead to inaccessible data, wasted space in the file, 
+ *          or <b><em>file corruption</em></b>.
+ *
+ * \version 1.8.11 Fortran subroutine introduced in this release.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t  H5Odecr_refcount(hid_t object_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Copies an object in an HDF5 file
+ *
+ * \param[in] src_loc_id Object identifier indicating the location of the 
+ *                       source object to be copied
+ * \param[in] src_name Name of the source object to be copied
+ * \param[in] dst_loc_id Location identifier specifying the destination
+ * \param[in] dst_name Name to be assigned to the new copy
+ * \param[in] ocpypl_id Object copy property list
+ * \lcpl_id
+ *
+ * \return \herr_t
+ *
+ * \details H5Ocopy() copies the group, dataset or committed datatype
+ *          specified by \p src_name from the file or group specified by
+ *          \p src_loc_id to the destination location \p dst_loc_id.
+ *
+ *          The destination location, as specified in dst_loc_id, may
+ *          be a group in the current file or a location in a different
+ *          file. If dst_loc_id is a file identifier, the copy will be
+ *          placed in that file’s root group.
+ *
+ *          The copy will be created with the path specified in \p dst_name,
+ *          which must not pre-exist in the destination location. If
+ *          \p dst_name already exists at the location \p dst_loc_id, 
+ *          H5Ocopy() will fail. If \p dst_name is an absolute path, 
+ *          the copy will be created relative to the file’s root group.
+ *
+ *          The copy of the object is created with the property lists
+ *          specified by \p ocpypl_id and \p lcpl_id. #H5P_DEFAULT can be passed
+ *          in for these property lists. The default behavior:
+ *
+ *          - of the link creation property list is to NOT create 
+ *             intermediate groups.
+ *          - of the flags specified by the object creation property list 
+ *            is described in H5Pset_copy_object(). 
+ *
+ *          These property lists or flags can be modified to govern the 
+ *          behavior of H5Ocopy() as follows:
+ *
+ *          - A flag controlling the creation of intermediate groups that
+ *              may not yet exist is set in the link creation property list
+ *              \p lcpl_id with H5Pset_create_intermediate_group().
+ *
+ *          - Copying of committed datatypes can be tuned through the use
+ *              of H5Pset_copy_object(), H5Padd_merge_committed_dtype_path(),
+ *              H5Pset_mcdt_search_cb(), and related functions.
+ *
+ *          - Flags controlling other aspects of object copying are set in the
+ *              object copy property list \p ocpypl_id with H5Pset_copy_object().
+ *
+ *          H5Ocopy() will always try to make a copy of the object specified 
+ *          in \p src_name.
+ *
+ *          - If the object specified by \p src_name is a group containing a
+ *              soft or external link, the default is that the new copy will
+ *              contain a soft or external link with the same value as the
+ *              original. See H5Pset_copy_object() for optional settings.
+ *
+ *          - If the path specified in \p src_name is or contains a soft link
+ *              or an external link, H5Ocopy() will copy the target object.
+ *              Use H5Lcopy() if the intent is to create a new soft or external
+ *              link with the same value as the original link.
+ *
+ *          H5Ocopy() can be used to copy an object in an HDF5 file. If
+ *          an object has been changed since it was opened, it should be
+ *          written back to the file before using H5Ocopy(). The object
+ *          can be written back either by closing the object (H5Gclose(),
+ *          H5Oclose(), H5Dclose(), or H5Tclose()) or by flushing
+ *          the HDF5 file (H5Fflush()).
+ *
+ * \par See Also:
+ *      - Functions to modify the behavior of H5Ocopy():
+ *          - H5Padd_merge_committed_dtype_path()
+ *          - H5Pset_copy_object()
+ *          - H5Pset_create_intermediate_group()
+ *          - H5Pset_mcdt_search_cb()
+ *          .
+ *      - Copying Committed Datatypes with #H5Ocopy - A comprehensive 
+ *        discussion of copying committed datatypes (PDF) in 
+ *        Advanced Topics in HDF5
+ *
+ * \version 1.8.9 Fortran subroutine introduced in this release.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t  H5Ocopy(hid_t src_loc_id, const char *src_name, hid_t dst_loc_id, const char *dst_name,
                        hid_t ocpypl_id, hid_t lcpl_id);
 H5_DLL herr_t  H5Ocopy_async(const char *app_file, const char *app_func, unsigned app_line, hid_t src_loc_id,
                              const char *src_name, hid_t dst_loc_id, const char *dst_name, hid_t ocpypl_id,
                              hid_t lcpl_id, hid_t es_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Sets comment for specified object
+ *
+ * \fgdta_loc_obj_id{obj_id}
+ * \param[in] comment The new comment
+ *
+ * \return \herr_t
+ *
+ * \details H5Oset_comment() sets the comment for the specified object
+ *          to the contents of \p comment. Any previously existing comment
+ *          is overwritten.
+ *
+ *          The target object is specified by an identifier, \p obj_id.
+ *          If \p comment is the empty string or a null pointer, any existing
+ *          comment message is removed from the object.
+ *
+ *          Comments should be relatively short, null-terminated, ASCII strings.
+ *
+ *          Comments can be attached to any object that has an object
+ *          header. Datasets, groups, and committed (named) datatypes have
+ *          object headers. Symbolic links do not have object headers.
+ *
+ *          If a comment is being added to an object attribute, this comment
+ *          will be attached to the object to which the attribute belongs
+ *          and not to the attribute itself.
+ *
+ * \version 1.8.11 Fortran subroutine introduced in this release.  
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t  H5Oset_comment(hid_t obj_id, const char *comment);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Sets comment for specified object
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] name Name of the object whose comment is to be set or reset
+ * \param[in] comment The new comment
+ * \lapl_id
+ *
+ * \return \herr_t
+ *
+ * \details H5Oset_comment_by_name() sets the comment for the specified object
+ *          to the contents of \p comment. Any previously existing comment
+ *          is overwritten.
+ * 
+ *          The target object is specified by \p loc_id and \p name.
+ *          \p loc_id can specify any object in the file. 
+ *          \p name can be one of the following:
+ *
+ *          - The name of the object specified as a path relative to \p loc_id 
+ *          - An absolute name of the object, starting from \c /, the file’s root group
+ *          - A dot (\c .), if \p loc_id fully specifies the object
+ *
+ *          If \p comment is the empty string or a null pointer, any existing
+ *          comment message is removed from the object.
+ *
+ *          Comments should be relatively short, null-terminated, ASCII strings.
+ *
+ *          Comments can be attached to any object that has an object
+ *          header. Datasets, groups, and committed (named) datatypes have
+ *          object headers. Symbolic links do not have object headers.
+ *
+ *          If a comment is being added to an object attribute, this comment
+ *          will be attached to the object to which the attribute belongs
+ *          and not to the attribute itself.
+ *
+ *          \p lapl_id contains a link access property list identifier. A
+ *          link access property list can come into play when traversing
+ *          links to access an object.
+ *
+ * \version 1.8.11 Fortran subroutine introduced in this release.  
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t  H5Oset_comment_by_name(hid_t loc_id, const char *name, const char *comment, hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves comment for specified object
+ *
+ * \fgdta_loc_obj_id{obj_id}
+ * \param[out] comment The comment
+ * \param[in] bufsize Anticipated required size of the comment buffer
+ *
+ * \return Upon success, returns the number of characters in the
+ *         comment, not including the \c NULL terminator, or zero (\c 0) if
+ *         the object has no comment. The value returned may be larger
+ *         than \p bufsize. Otherwise returns a negative value.
+ *
+ * \details H5Oget_comment() retrieves the comment for the specified object in
+ *          the buffer \p comment.
+ *           
+ *          The target object is specified by an identifier, \p object_id.
+ *
+ *          The size in bytes of the buffer \p comment, including the \c NULL
+ *          terminator, is specified in \p bufsize. If \p bufsize is unknown,
+ *          a preliminary H5Oget_comment() call with the pointer \p comment
+ *          set to \c NULL will return the size of the comment <em>without</em>
+ *          the \c NULL terminator.
+ *
+ *          If \p bufsize is set to a smaller value than described above,
+ *          only \p bufsize bytes of the comment, without a \c NULL terminator,
+ *          are returned in \p comment.
+ *
+ *          If an object does not have a comment, the empty string is
+ *          returned in \p comment.
+ *
+ * \version 1.8.11 Fortran subroutine introduced in this release.  
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL ssize_t H5Oget_comment(hid_t obj_id, char *comment, size_t bufsize);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves comment for specified object
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] name Name of the object whose comment is to be retrieved
+ * \param[out] comment The comment
+ * \param[in] bufsize Anticipated required size of the \p comment buffer
+ * \lapl_id
+ *
+ * \return Upon success, returns the number of characters in the comment, 
+ *         not including the \c NULL terminator, or zero (\c 0) if the object 
+ *         has no comment. The value returned may be larger than \c bufsize. 
+ *         Otherwise returns a negative value.
+ *
+ * \details H5Oget_comment_by_name() retrieves the comment for an object 
+ *          in the buffer \p comment.
+ *
+ *          The target object is specified by \p loc_id and \p name.
+ *          \p loc_id can specify any object in the file. 
+ *          \p name can be one of the following:
+ *
+ *          - The name of the object relative to \p loc_id 
+ *          - An absolute name of the object, starting from \c /, the file’s root group
+ *          - A dot (\c .), if \p loc_id fully specifies the object
+ *
+ *          The size in bytes of the comment, including the \c NULL terminator,
+ *          is specified in \p bufsize. If \p bufsize is unknown, a preliminary
+ *          H5Oget_comment_by_name() call with the pointer \p comment set
+ *          to \c NULL will return the size of the comment <em>without</em> 
+ *          the \c NULL terminator.
+ *
+ *          If \p bufsize is set to a smaller value than described above,
+ *          only \p bufsize bytes of the comment, without a \c NULL terminator,
+ *          are returned in \p comment.
+ *
+ *          If an object does not have a comment, the empty string is
+ *          returned in \p comment.
+ *
+ *          \p lapl_id contains a link access property list identifier. A
+ *          link access property list can come into play when traversing
+ *          links to access an object.
+ *
+ * \version 1.8.11 Fortran subroutine introduced in this release.  
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL ssize_t H5Oget_comment_by_name(hid_t loc_id, const char *name, char *comment, size_t bufsize,
                                       hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Recursively visits all objects accessible from a specified object
+ *
+ * \fgdta_loc_obj_id{obj_id}
+ * \idx_type
+ * \order
+ * \param[in] op Callback function passing data regarding the object 
+ *               to the calling application
+ * \param[in] op_data User-defined pointer to data required by the application 
+ *                    for its processing of the object
+ * \param[in] fields Flags specifying the fields to be retrieved to the 
+ *                   callback \p op
+ *
+ * \return On success, returns the return value of the first operator
+ *         that returns a positive value, or zero if all members were
+ *         processed with no operator returning non-zero.
+ *
+ * \return On failure, returns a negative value if something goes wrong
+ *         within the library, or the first negative value returned by
+ *         an operator.
+ *
+ * \details H5Ovisit3() is a recursive iteration function to visit the 
+ *          object \p obj_id and, if \p obj_id is a group, all objects in 
+ *          and below it in an HDF5 file, thus providing a mechanism for 
+ *          an application to perform a common set of operations across 
+ *          all of those objects or a dynamically selected subset. 
+ *          For non-recursive iteration across the members of a group, 
+ *          see H5Literate2().
+ *
+ *          If \p obj_id is a group identifier, that group serves as the
+ *          root of a recursive iteration. If \p obj_id is a file identifier,
+ *          that file’s root group serves as the root of the recursive
+ *          iteration.  If \p obj_id is an attribute identifier, 
+ *          then the object where the attribute is attached will be iterated.
+ *          If \p obj_id is any other type of object, such as a dataset or 
+ *          named datatype, there is no iteration.  
+ *
+ *          Two parameters are used to establish the iteration: \p idx_type
+ *          and \p order.
+ *
+ *          \p idx_type specifies the index to be used. If the links in
+ *          a group have not been indexed by the index type, they will
+ *          first be sorted by that index then the iteration will begin;
+ *          if the links have been so indexed, the sorting step will be
+ *          unnecessary, so the iteration may begin more quickly. Valid
+ *          values include the following:
+ *
+ *          \indexes
+ *
+ *          Note that the index type passed in \p idx_type is a 
+ *          <em>best effort</em> setting. If the application passes in 
+ *          a value indicating iteration in creation order and a group is 
+ *          encountered that was not tracked in creation order, that group 
+ *          will be iterated over in alpha-numeric order by name, or 
+ *          <em>name order</em>.  (<em>Name order</em> is the native order 
+ *          used by the HDF5 library and is always available.)
+ *
+ *          \p order specifies the order in which objects are to be inspected
+ *          along the index specified in \p idx_type. Valid values include
+ *          the following:
+ *
+ *          \orders
+ *
+ *          The prototype of the callback function op is as follows (as
+ *          defined in the source code file H5Opublic.h):
+ *
+ *          \snippet this H5O_iterate2_t_snip
+ *
+ *          The parameters of this callback function have the following values 
+ *          or meanings:
+ *          <table>
+ *          <tr>
+ *              <td>\c obj</td>
+ *              <td>Object that serves as root of the iteration; 
+ *                  same value as the H5Ovisit() \p obj_id parameter</td>
+ *          </tr>
+ *          <tr>
+ *          <td>\c name</td>
+ *          <td>Name of object, relative to \c obj, being examined at 
+ *              current step of the iteration</td>
+ *          </tr>
+ *          <tr>
+ *              <td>\c info</td>
+ *              <td>H5O_info2_t \c struct containing information 
+ *                  regarding that object</td>
+ *          </tr>
+ *          <tr>
+ *              <td>\c op_data</td>
+ *              <td>User-defined pointer to data required by the application in 
+ *                  processing the object; a pass-through of the \c op_data pointer 
+ *                  provided with the H5Ovisit() function call</td>
+ *          </tr>
+ *          </table>
+ *
+ *          The H5O_info2_t \c struct is defined in H5Opublic.h as follows:
+ *          \snippet this H5O_info2_t_snip
+ *
+ *          H5O_token_t is defined in H5public.h as follows:
+ *          \snippet H5public.h H5O_token_t_snip
+ *      
+ *          The #H5O_type_t enum indicates the object type and is 
+ *          defined in H5Opublic.h as follows:
+ *          \snippet this H5O_type_t_snip
+ *      
+ *          Note that the object retrieved as indicated by \p obj_id 
+ *          refers only to the types specified by #H5O_type_t.
+ *
+ *          The return values from an operator are:
+ *          - Zero causes the visit iterator to continue, returning zero when all 
+ *            group members have been processed.
+ *          - A positive value causes the visit iterator to immediately return that 
+ *            positive value, indicating short-circuit success.
+ *          - A negative value causes the visit iterator to immediately return that 
+ *            value, indicating failure.
+ *
+ *          The H5Ovisit3() \p op_data parameter is a user-defined pointer to the data 
+ *          required to process objects in the course of the iteration. This pointer 
+ *          is passed back to each step of the iteration in the callback 
+ *          function’s \p op_data parameter. 
+ *
+ *          The \p fields parameter contains flags to determine which fields will 
+ *          be retrieved by the \p op callback function. These flags are defined 
+ *          in the H5Opublic.h file:
+ *          \obj_info_fields
+ *
+ *          H5Lvisit2() and H5Ovisit3() are companion functions: one for
+ *          examining and operating on links; the other for examining
+ *          and operating on the objects that those links point to. Both
+ *          functions ensure that by the time the function completes
+ *          successfully, every link or object below the specified point
+ *          in the file has been presented to the application for whatever
+ *          processing the application requires. These functions assume
+ *          that the membership of the group being iterated over remains
+ *          unchanged through the iteration; if any of the links in the
+ *          group change during the iteration, the resulting behavior
+ *          is undefined.
+ *
+ * \note \Bold{Programming Note for C++ Developers Using C Functions:}
+ * \note If a C routine that takes a function pointer as an argument is
+ *       called from within C++ code, the C routine should be returned
+ *       from normally.
+ *
+ * \note Examples of this kind of routine include callbacks such as
+ *       H5Pset_elink_cb() and H5Pset_type_conv_cb() and 
+ *       functions such as H5Tconvert() and H5Ewalk2().
+ *
+ * \note Exiting the routine in its normal fashion allows the HDF5
+ *       C library to clean up its work properly. In other words, if
+ *       the C++ application jumps out of the routine back to the C++
+ *       “catch” statement, the library is not given the opportunity
+ *       to close any temporary data structures that were set up when
+ *       the routine was called. The C++ application should save some
+ *       state as the routine is started so that any problem that occurs
+ *       might be diagnosed.
+ *      
+ * \par Example
+ *      An example snippet from test/links.c:
+ *      \snippet links.c H5Ovisit3_snip
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Ovisit3(hid_t obj_id, H5_index_t idx_type, H5_iter_order_t order, H5O_iterate2_t op,
                          void *op_data, unsigned fields);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Recursively visits all objects accessible from a specified object
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] obj_name Name of the object, generally relative to
+ *                     \p loc_id, that will serve as root of the iteration
+ * \idx_type
+ * \order
+ * \param[in] op Callback function passing data regarding the object 
+ *               to the calling application
+ * \param[in] op_data User-defined pointer to data required by the application 
+ *                    for its processing of the object
+ * \param[in] fields Flags specifying the fields to be retrieved to the 
+ *                   callback function \p op
+ * \lapl_id
+ *
+ * \return On success, returns the return value of the first operator
+ *         that returns a positive value, or zero if all members were
+ *         processed with no operator returning non-zero.
+ *
+ * \return On failure, returns a negative value if something goes wrong
+ *         within the library, or the first negative value returned by
+ *         an operator.
+ *
+ * \details H5Ovisit_by_name3() is a recursive iteration function to visit 
+ *          the object specified by the \p loc_id / \p obj_name parameter 
+ *          pair and, if that object is a group, all objects in and below it 
+ *          in an HDF5 file, thus providing a mechanism for an application to 
+ *          perform a common set of operations across all of those objects or 
+ *          a dynamically selected subset. For non-recursive iteration across 
+ *          the members of a group, see H5Literate2().
+ *
+ *          The object serving as the root of the iteration is specified
+ *          by the \p loc_id / \p obj_name parameter pair. \p loc_id specifies
+ *          a file or an object in a file;  if \p loc_id is an attribute identifier,
+ *          the object where the attribute is attached will be used.
+ *          \p obj_name specifies either an object in the file (with an absolute 
+ *          name based in the file’s root group) or an object name relative 
+ *          to \p loc_id. If \p loc_id fully specifies the object that is to serve
+ *          as the root of the iteration, \p obj_name should be '\c .' (a dot). 
+ *          (Note that when \p loc_id fully specifies the object that is to serve
+ *          as the root of the iteration, the user may wish to consider
+ *          using H5Ovisit3() instead of H5Ovisit_by_name3().)
+ *
+ *          Two parameters are used to establish the iteration: \p idx_type
+ *          and \p order.
+ *
+ *          \p idx_type specifies the index to be used. If the links in
+ *          a group have not been indexed by the index type, they will
+ *          first be sorted by that index then the iteration will begin;
+ *          if the links have been so indexed, the sorting step will be
+ *          unnecessary, so the iteration may begin more quickly. Valid
+ *          values include the following:
+ *
+ *          \indexes
+ *
+ *          Note that the index type passed in \p idx_type is a 
+ *          <em>best effort</em> setting. If the application passes in a 
+ *          value indicating iteration in creation order and a group is 
+ *          encountered that was not tracked in creation order, that group 
+ *          will be iterated over in alpha-numeric order by name, or 
+ *          <em>name order</em>.  (<em>Name order</em> is the native order 
+ *          used by the HDF5 library and is always available.)
+ *
+ *          \p order specifies the order in which objects are to be inspected
+ *          along the index specified in \p idx_type. Valid values include
+ *          the following:
+ *
+ *          \orders
+ *
+ *          The prototype of the callback function op is as follows (as
+ *          defined in the source code file H5Opublic.h):
+ *
+ *          \snippet this H5O_iterate2_t_snip
+ *
+ *          The parameters of this callback function have the following 
+ *          values or meanings:
+ *          <table>
+ *          <tr>
+ *              <td>\c obj</td>
+ *              <td>Object that serves as root of the iteration</td>
+ *          </tr>
+ *          <tr>
+ *          <td>\c name</td>
+ *          <td>Name of object, relative to \c obj, being examined at 
+ *              current step of the iteration</td>
+ *          </tr>
+ *          <tr>
+ *              <td>\c info</td>
+ *              <td>H5O_info2_t \c struct containing information 
+ *                  regarding that object</td>
+ *          </tr>
+ *          <tr>
+ *              <td>\c op_data</td>
+ *              <td>User-defined pointer to data required by the application in 
+ *                  processing the object</td>
+ *          </tr>
+ *          </table>
+ *
+ *          The H5O_info2_t \c struct is defined in H5Opublic.h as follows:
+ *          \snippet this H5O_info2_t_snip
+ *
+ *          H5O_token_t is defined in H5public.h as follows:
+ *          \snippet H5public.h H5O_token_t_snip
+ *      
+ *          The #H5O_type_t enum indicates the object type and is 
+ *          defined in H5Opublic.h as follows:
+ *          \snippet this H5O_type_t_snip
+ *      
+ *          The H5Ovisit_by_name3() \p op_data parameter is a user-defined
+ *          pointer to the data required to process objects in the course
+ *          of the iteration. This pointer is passed back to each step of
+ *          the iteration in the callback function’s \p op_data parameter.
+ *
+ *          \p lapl_id is a link access property list. In the general case,
+ *          when default link access properties are acceptable, this can
+ *          be passed in as #H5P_DEFAULT. An example of a situation that
+ *          requires a non-default link access property list is when
+ *          the link is an external link; an external link may require
+ *          that a link prefix be set in a link access property list
+ *          (see H5Pset_elink_prefix()).
+ *
+ *          The \p fields parameter contains flags to determine which fields will 
+ *          be retrieved by the \p op callback function. These flags are defined 
+ *          in the H5Opublic.h file:
+ *          \obj_info_fields
+ *
+ *          H5Lvisit_by_name2() and H5Ovisit_by_name3() are companion 
+ *          functions: one for examining and operating on links; the other 
+ *          for examining and operating on the objects that those links point to. 
+ *          Both functions ensure that by the time the function completes
+ *          successfully, every link or object below the specified point
+ *          in the file has been presented to the application for whatever
+ *          processing the application requires.
+ *
+ * \note \Bold{Programming Note for C++ Developers Using C Functions:}
+ * \note If a C routine that takes a function pointer as an argument is
+ *       called from within C++ code, the C routine should be returned
+ *       from normally.
+ *
+ * \note Examples of this kind of routine include callbacks such as
+ *       H5Pset_elink_cb() and H5Pset_type_conv_cb() and 
+ *       functions such as H5Tconvert() and H5Ewalk2().
+ *
+ * \note Exiting the routine in its normal fashion allows the HDF5
+ *       C library to clean up its work properly. In other words, if
+ *       the C++ application jumps out of the routine back to the C++
+ *       “catch” statement, the library is not given the opportunity
+ *       to close any temporary data structures that were set up when
+ *       the routine was called. The C++ application should save some
+ *       state as the routine is started so that any problem that occurs
+ *       might be diagnosed.
+ *      
+ * \par Example
+ *      An example snippet from test/links.c:
+ *      \snippet links.c H5Ovisit_by_name3_snip
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Ovisit_by_name3(hid_t loc_id, const char *obj_name, H5_index_t idx_type,
                                  H5_iter_order_t order, H5O_iterate2_t op, void *op_data, unsigned fields,
                                  hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Closes an object in an HDF5 file
+ *
+ * \obj_id{object_id}
+ *
+ * \return \herr_t
+ *
+ * \details H5Oclose() closes the group, dataset, or named datatype specified by
+ *          object_id.
+ *
+ *          This function is the companion to H5Oopen(), and has the same
+ *          effect as calling H5Gclose(), H5Dclose(), or H5Tclose().
+ *
+ *          H5Oclose() is not used to close a dataspace, attribute, property
+ *          list, or file.
+ *
+ * \version 1.8.8 Fortran subroutine introduced in this release.  
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t  H5Oclose(hid_t object_id);
 H5_DLL herr_t  H5Oclose_async(const char *app_file, const char *app_func, unsigned app_line, hid_t object_id,
                               hid_t es_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Flushes all buffers associated with an HDF5 object to disk
+ *
+ * \fgdta_loc_obj_id{obj_id}
+ *
+ * \return \herr_t
+ *
+ * \details H5Oflush() causes all buffers associated with an object to be immediately
+ *          flushed to disk without removing the data from the cache.
+ *
+ *          The object associated with \p object_id can be any named object in an 
+ *          HDF5 file including a dataset, a group, or a committed datatype.
+ *
+ * \note HDF5 does not possess full control over buffering. H5Oflush()
+ *       flushes the internal HDF5 buffers and then asks the operating
+ *       system (the OS) to flush the system buffers for the open
+ *       files. After that, the OS is responsible for ensuring that
+ *       the data is actually flushed to disk.
+ *
+ * \par See Also:
+ *      - H5Dflush()
+ *      - H5Drefresh()
+ *      - H5Oflush()
+ *      - H5Grefresh()
+ *      - H5Oflush()
+ *      - H5Orefresh()
+ *      - H5Tflush()
+ *      - H5Trefresh()
+ * \par
+ *      - \c H5DOappend()
+ *      - H5Fstart_swmr_write()
+ *      - H5Pget_append_flush()
+ *      - H5Pget_object_flush_cb()
+ *      - H5Pset_append_flush()
+ *      - H5Pset_object_flush_cb()
+ * \par
+ *      - H5Oare_mdc_flushes_disabled()
+ *      - H5Odisable_mdc_flushes()
+ *      - H5Oenable_mdc_flushes()
+ * 
+ * \since 1.10.0
+ *
+ */
 H5_DLL herr_t  H5Oflush(hid_t obj_id);
 H5_DLL herr_t  H5Oflush_async(const char *app_file, const char *app_func, unsigned app_line, hid_t obj_id,
                               hid_t es_id);
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Refreshes all buffers associated with an HDF5 object
+ *
+ * \fgdta_loc_obj_id{oid}
+ *
+ * \return \herr_t
+ *
+ * \details H5Orefresh() causes all buffers associated with an object to be cleared
+ *          and immediately re-loaded with updated contents from disk.
+ *
+ *          This function essentially closes the object, evicts all
+ *          metadata associated with it from the cache, and then re-opens
+ *          the object. The reopened object is automatically re-registered
+ *          with the same identifier.
+ *
+ *          The object associated with \p oid can be any named object in an 
+ *          HDF5 file including a dataset, a group, or a committed datatype.
+ * 
+ * \since 1.10.0
+ *
+ */
 H5_DLL herr_t  H5Orefresh(hid_t oid);
 H5_DLL herr_t  H5Orefresh_async(const char *app_file, const char *app_func, unsigned app_line, hid_t oid,
                                 hid_t es_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Prevents metadata entries for an HDF5 object from being flushed 
+ *        from the metadata cache to storage
+ *
+ * \param[in] object_id Identifier of the object that will have flushes disabled; 
+ *                      may be a group, named datatype, or dataset identifier
+ *
+ * \return \herr_t
+ *
+ * \details H5Odisable_mdc_flushes(), H5Oenable_mdc_flushes() and associated flush
+ *          functions can be used to control the flushing of entries from
+ *          a file’s metadata cache.
+ *
+ *          This function prevents an object’s or cache’s dirty metadata
+ *          entries from being flushed from the cache by the usual cache
+ *          eviction/flush policy. Instead, users must manually flush the
+ *          cache or entries for individual objects via the appropriate
+ *          H5Fflush(), H5Dflush(), H5Gflush(), H5Tflush(), and H5Oflush() calls.
+ *
+ *          Metadata cache entries can be controlled at both the individual
+ *          HDF5 object level (datasets, groups, committed datatypes)
+ *          and the entire metadata cache level.
+ *
+ * \note HDF5 objects include datasets, groups, and committed datatypes. 
+ *       Only #hid_t identifiers that represent these objects can be passed to the function.
+ * \note Passing in a #hid_t identifier that represents any other HDF5 entity is 
+ *       considered an error.
+ * \note It is an error to pass an HDF5 file identifier 
+ *       (obtained from H5Fopen() or H5Fcreate())
+ *       to this function.
+ * \note Misuse of this function can cause the cache to exhaust 
+ *       available memory.
+ * \note Objects can be returned to the default automatic flush behavior 
+ *       with H5Oenable_mdc_flushes().
+ * \note Flush prevention only pertains to new or dirty metadata entries. 
+ *       Clean entries can be evicted from the cache.
+ * \note Calling this function on an object that has already had flushes 
+ *       disabled will return an error.
+ *
+ * \since 1.10.0
+ *
+ */
 H5_DLL herr_t  H5Odisable_mdc_flushes(hid_t object_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Enables flushing of dirty metadata entries from a file’s metadata cache
+ *
+ * \param[in] object_id Identifier of the object that will have flushes re-enabled; 
+ *                      may be a group, named datatype, or dataset identifier 
+ *
+ * \return \herr_t
+ *
+ * \details H5Oenable_mdc_flushes(), H5Odisable_mdc_flushes()
+ *          and associated flush functions can be used to control the flushing 
+ *          of entries from a file’s metadata cache.
+ *
+ *          This function allows an object or cache’s dirty metadata entries to be 
+ *          flushed from the cache by the usual cache eviction/flush policy.
+ *
+ *          Metadata cache entries can be controlled at both the individual HDF5 
+ *          object level (datasets, groups, committed datatypes) and the entire 
+ *          metadata cache level.
+ *
+ *
+ * \note HDF5 objects include datasets, groups, and committed datatypes. 
+ *       Only #hid_t identifiers that represent these objects can be 
+ *       passed to the function.
+ *
+ * \note Passing in a #hid_t identifier that represents any other HDF5 entity
+ *       is considered an error.
+ *
+ * \note It is an error to pass an HDF5 file identifier 
+ *       (obtained from H5Fopen() or H5Fcreate())
+ *       to this function.
+ *
+ * \note Using this function on an object that has not had flushes disabled 
+ *       is considered an error. The state of an object can be determined 
+ *       with H5Oare_mdc_flushes_disabled().
+ *
+ * \note An object will be returned to the default flush algorithm when it is closed.
+ *
+ * \note All objects will be returned to the default flush algorithm when 
+ *       the file is closed.
+ *
+ * \note An object’s entries will not necessarily be flushed as a result of 
+ *       calling this function.
+ *
+ * \since 1.10.0
+ *
+ */
 H5_DLL herr_t  H5Oenable_mdc_flushes(hid_t object_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves comment for specified object
+ *
+ * \param[in] object_id Identifier of an object in the cache; 
+ *                      may be a group, named datatype, or dataset identifier
+ * \param[out] are_disabled Flushes enabled/disabled
+ *
+ * \return \p are_disabled will be set to \c 1 if an object has had flushes disabled 
+ *            and \c 0 if it has not had flushes disabled.
+ * \return \herr_t
+ *
+ * \details H5Oare_mdc_flushes_disabled() determines if an HDF5 object (dataset, group, committed
+ *          datatype) has had flushes of metadata entries disabled.
+ *
+ *          The H5Oenable_mdc_flushes(), H5Odisable_mdc_flushes() and
+ *          associated flush functions can be used to control the flushing of 
+ *          entries from a file’s metadata cache. Metadata cache entries can be controlled
+ *          at both the individual HDF5 object level (datasets, groups,
+ *          committed datatypes) and the entire metadata cache level.
+ *
+ * \note HDF5 objects include datasets, groups, and committed datatypes. 
+ *       Only #hid_t identifiers that represent these objects can be passed to the function.
+ * \note Passing in a #hid_t identifier that represents any other HDF5 entity is 
+ *       considered an error.
+ * \note It is an error to pass an HDF5 file identifier 
+ *       (obtained from H5Fopen() or H5Fcreate()) to this function.
+ *
+ * \since 1.10.0
+ *
+ */
 H5_DLL herr_t  H5Oare_mdc_flushes_disabled(hid_t object_id, hbool_t *are_disabled);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Compares two VOL connector object tokens
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] token1 First object token
+ * \param[in] token2 Second object token
+ * \param[out] cmp_value Comparison value
+ *
+ * \return \herr_t
+ *
+ * \details H5Otoken_cmp() compares two VOL connector object tokens, \p token1 
+ *          and \p token2 for the file or group identifier specified by \p loc_id.  
+ *          Both object tokens must be from the same VOL connector class.
+ *
+ *          H5O_token_t is defined in H5public.h as follows:
+ *          \snippet H5public.h H5O_token_t_snip
+ *
+ *          A comparison value, \p cmp_value, is returned, which indicates the 
+ *          result of the comparison:
+ *
+ * <table>
+ *  <tr>
+ *      <th>cmp_value</th>
+ *      <th>Result</th>
+ * </tr>
+ *  <tr>
+ *      <td> > 0</td>
+ *      <td> \p token1 > \p token2</td>
+ *  </tr>
+ *  <tr>
+ *      <td> < 0</td>
+ *      <td>\p token1 < \p token2</td>
+ *  </tr>
+ *  <tr>
+ *      <td>0</td>
+ *      <td>\p token1 = \p token2</td>
+ *  </tr>
+ * </table>
+ *
+ * \par Example
+ *      An example snippet from test/links.c:
+ *      \snippet links.c H5Otoken_cmp_snip
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Otoken_cmp(hid_t loc_id, const H5O_token_t *token1, const H5O_token_t *token2,
                             int *cmp_value);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Serializes a connector's object token into a string
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] token Connector object token
+ * \param[out] token_str String for connector object token \p token
+ *
+ * \return \herr_t
+ *
+ * \details H5Otoken_to_str() serializes a connector's object token specified by 
+ *          \p token and the location identifier for the object, \p loc_id, 
+ *          into a string, \p token_str.
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Otoken_to_str(hid_t loc_id, const H5O_token_t *token, char **token_str);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Deserializes a string into a connector object token
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] token_str Object token string
+ * \param[out] token Connector object token
+ *
+ * \return \herr_t
+ *
+ * \details H5Otoken_from_str() deserializes a string, \p token_str, into a 
+ *          connector object token, \p token, for the object specified by the 
+ *          location identifier, \p loc_id.
+ *
+ * \since 1.12.0
+ *
+ */
 H5_DLL herr_t  H5Otoken_from_str(hid_t loc_id, const char *token_str, H5O_token_t *token);
 
 /* API Wrappers for async routines */
@@ -287,12 +1868,16 @@ H5_DLLVAR const H5O_token_t H5O_TOKEN_UNDEF_g;
 /* Typedefs */
 
 /* A struct that's part of the H5G_stat_t structure (deprecated) */
+//! [H5O_stat_t_snip]
 typedef struct H5O_stat_t {
     hsize_t  size;    /* Total size of object header in file */
     hsize_t  free;    /* Free space within object header */
     unsigned nmesgs;  /* Number of object header messages */
     unsigned nchunks; /* Number of object header chunks */
 } H5O_stat_t;
+//! [H5O_stat_t_snip]
+
+//! [H5O_info1_t_snip]
 
 /* Information struct for object */
 /* (For H5Oget_info/H5Oget_info_by_name/H5Oget_info_by_idx versions 1 & 2) */
@@ -314,27 +1899,938 @@ typedef struct H5O_info1_t {
     } meta_size;
 } H5O_info1_t;
 
+//! [H5O_info1_t_snip]
+
 /* Prototype for H5Ovisit/H5Ovisit_by_name() operator (versions 1 & 2) */
+//! [H5O_iterate1_t_snip]
+
 typedef herr_t (*H5O_iterate1_t)(hid_t obj, const char *name, const H5O_info1_t *info, void *op_data);
 
+//! [H5O_iterate1_t_snip]
+
 /* Function prototypes */
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Opens an object using its address within an HDF5 file.
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] addr Object's address in the file
+ *
+ * \return \hid_tv{object}
+ *
+ * \deprecated As of HDF5-1.12 this function has been deprecated in favor of
+ *             the function H5Oopen_by_token().
+ *
+ * \details H5Oopen_by_addr() opens a group, dataset, or committed (named) datatype using its 
+ *          address within an HDF5 file, \p addr. The resulting opened object is identical to 
+ *          an object opened with H5Oopen() and should be closed with H5Oclose() or an 
+ *          object-type-specific closing function (such as H5Gclose()) when no longer needed.
+ *
+ *          \p loc_id is a location identifier in the file.
+ *
+ *          The object’s address within the file, \p addr, is the byte offset of the first byte 
+ *          of the object header from the beginning of the HDF5 file space, i.e., from the 
+ *          beginning of the super block (see the “HDF5 Storage Model” section of the The 
+ *          HDF5 Data Model and File Structure chapter of the <em>HDF5 User's Guide</em>.)
+ *
+ *          \p addr can be obtained via either of two function calls. H5Gget_objinfo() returns
+ *          the object’s address in the \c objno field of the H5G_stat_t \c struct; 
+ *          H5Lget_info() returns the address in the \c address field of the #H5L_info_t \c struct.
+ *
+ *          The address of the HDF5 file on a physical device has no effect on H5Oopen_by_addr(), 
+ *          nor does the use of any file driver. As stated above, the object address is its 
+ *          offset within the HDF5 file; HDF5’s file drivers will transparently map this to an 
+ *          address on a storage device.
+ *
+ * \warning This function must be used with care! 
+ * \warning Improper use can lead to inaccessible data, wasted space in the file, 
+ *          or <b><em>file corruption</em></b>. 
+ * \warning This function is dangerous if called on an invalid address. The risk can be safely 
+ *          overcome by retrieving the object address with H5Gget_objinfo() or H5Lget_info()
+ *          immediately before calling H5Oopen_by_addr(). The immediacy of the operation can be 
+ *          important; if time has elapsed and the object has been deleted from the file, 
+ *          the address will be invalid and file corruption can result.
+ *
+ * \version 1.8.4 Fortran subroutine added in this release.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL hid_t  H5Oopen_by_addr(hid_t loc_id, haddr_t addr);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves the metadata for an object specified by an identifier
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[out] oinfo Buffer in which to return object information
+ *
+ * \return \herr_t
+ *
+ * \deprecated As of HDF5-1.12 this function has been deprecated in favor of
+ *             the function H5Oget_info3() or the macro #H5Oget_info.
+ *
+ * \details H5Oget_info1() specifies an object by its identifier, \p loc_id , and 
+ *          retrieves the metadata describing that object in \p oinfo , 
+ *          defined as a \c struct of type H5O_info1_t :
+ *
+ *          \snippet this H5O_info1_t_snip
+ *
+ *          Note the following about H5O_info1_t :
+ *          - Of the four time fields (\c atime, \c mtime, \c ctime, and \c btime) only \c ctime has been implemented.
+ *          - The \c atime value is the last time the object was read or written.
+ *          - The \c mtime value is the last time the raw data in the object was changed.
+ *          - The \c ctime value is the last time the metadata for the object was changed.
+ *          - The \c btime value is the time the object was created.
+ *          - The fields nested in the \c meta_size field are for internal library use only.
+ *
+ *          The #H5O_type_t \c enum indicates the object type and 
+ *          is defined in H5Opublic.h as follows:
+ *          \snippet this H5O_type_t_snip
+ *
+ *          Note that the object retrieved as indicated by \p loc_id
+ *          refers only to the types specified by #H5O_type_t.
+ *
+ *          An H5O_hdr_info_t \c struct holds object header metadata and is 
+ *          defined in H5Opublic.h as follows:
+ *          \snippet this H5O_hdr_info_t_snip
+ *
+ *          Valid values for the \c version field are \c H5O_VERSION_1 and \c H5O_VERSION_2. 
+ *          Version 2 of the object header is smaller and more efficient than version 1.
+ *
+ *          Please be aware that the information held by H5O_hdr_info_t may only be useful to 
+ *          developers with extensive HDF5 experience.
+ *
+ * \note If you are iterating through a lot of different objects to
+ *       retrieve information via the H5Oget_info() family of routines,
+ *       you may see memory building up. This can be due to memory
+ *       allocation for metadata such as object headers and messages
+ *       when the iterated objects are put into the metadata cache.
+ * \note
+ *       If the memory buildup is not desirable, you can configure a
+ *       smaller cache via H5Fset_mdc_config() or set the file access
+ *       property list via H5Pset_mdc_config(). A smaller sized cache
+ *       will force metadata entries to be evicted from the cache,
+ *       thus freeing the memory associated with the entries.
+ *
+ * \version 1.10.5 The macro #H5Oget_info was removed and the function H5Oget_info1() was copied to H5Oget_info().
+ * \version 1.10.3 Function H5Oget_info() was copied to H5Oget_info1(), and the macro #H5Oget_info was created.
+ * \version 1.8.15 Added a note about the valid values for the \c version field in the H5O_hdr_info_t structure.
+ * \version 1.8.11 Fortran subroutine introduced in this release.
+ * \version 1.8.10 Added #H5O_type_t structure to the Description section. \n
+ *                 Separated H5O_hdr_info_t structure from #H5O_info_t in the Description section. \n
+ *                 Clarified the definition and implementation of the time fields.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t H5Oget_info1(hid_t loc_id, H5O_info1_t *oinfo);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves the metadata for an object, identifying the object 
+ *        by location and relative name
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] name Name of group, relative to \p loc_id
+ * \param[out] oinfo Buffer in which to return object information
+ * \lapl_id
+ *
+ * \return \herr_t
+ *
+ * \deprecated As of HDF5-1.12 this function has been deprecated in favor of
+ *             the function H5Oget_info_by_name2() or the macro #H5Oget_info_by_name.
+ *
+ * \details H5Oget_info_by_name1() specifies an object’s location and name, \p loc_id 
+ *          and \p name, respectively, and retrieves the metadata describing that object
+ *          in \p oinfo, an H5O_info1_t \c struct.
+ *          
+ *          The \c struct H5O_info1_t is defined in H5Opublic.h and described
+ *          in the H5Oget_info1() function entry.
+ *          
+ *          The link access property list, \p lapl_id, is not currently used;
+ *          it should be passed in as #H5P_DEFAULT.
+ *
+ * \version 1.10.5 The macro #H5Oget_info_by_name was removed and the function 
+ *                 H5Oget_info_by_name1() was copied to H5Oget_info_by_name().
+ * \version 1.10.3 Function H5Oget_info_by_name() was copied to H5Oget_info_by_name1()
+ *                 and the macro #H5Oget_info_by_name was created.
+ * \version 1.8.8 Fortran 2003 subroutine and \c h5o_info_t derived type introduced 
+ *                in this release.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t H5Oget_info_by_name1(hid_t loc_id, const char *name, H5O_info1_t *oinfo, hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves the metadata for an object, identifying the object 
+ *        by an index position
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] group_name Name of group in which object is located
+ * \idx_type
+ * \order
+ * \param[in] n Position within the index
+ * \param[out] oinfo Buffer in which to return object information
+ * \lapl_id
+ *
+ * \return \herr_t
+ *
+ * \deprecated As of HDF5-1.12 this function has been deprecated in favor of
+ *             the function H5Oget_info_by_idx3() or the macro H5Oget_info_by_idx().
+ *
+ * \details H5Oget_info_by_idx1() retrieves the metadata describing an
+ *          object in the \c struct \p oinfo, as specified by the location,
+ *          \p loc_id, group name, \p group_name, the index by which objects
+ *          in that group are tracked, \p idx_type, the order by which the
+ *          index is to be traversed, \p order, and an object’s position
+ *          \p n within that index.
+ *
+ *          If \p loc_id fully specifies the group in which the object resides,
+ *          \p group_name can be a dot (\c .).
+ *
+ *          \p idx_type is of type #H5_index_t, defined in H5public.h as:
+ *          \snippet H5public.h H5_index_t_snip
+ *
+ *          \p order is of type #H5_iter_order_t defined in H5public.h as:
+ *          \snippet H5public.h H5_iter_order_t_snip
+ *
+ *          \p oinfo, in which the object information is returned, is a \c struct of
+ *          type H5O_info1_t .
+ *          \snippet this H5O_info1_t_snip
+ *
+ *          The link access property list, \c lapl_id, is not currently used; 
+ *          it should be passed in as #H5P_DEFAULT.
+ *
+ * \version 1.10.5 The macro #H5Oget_info_by_idx was removed and the function 
+ *                 H5Oget_info_by_idx() was copied to H5Oget_info_by_idx1().
+ * \version 1.10.3 Function H5Oget_info_by_idx() was copied to H5Oget_info_by_idx1()
+ *                 and the macro #H5Oget_info_by_idx was created.
+ * \version 1.8.11 Fortran subroutine introduced in this release.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t H5Oget_info_by_idx1(hid_t loc_id, const char *group_name, H5_index_t idx_type,
                                   H5_iter_order_t order, hsize_t n, H5O_info1_t *oinfo, hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves the metadata for an object specified by an identifier
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[out] oinfo Buffer in which to return object information
+ * \param[in] fields Flags specifying the fields to include in \p oinfo
+ *
+ * \return \herr_t
+ *
+ * \deprecated As of HDF5-1.12 this function has been deprecated in favor of
+ *             the function H5Oget_info3() or the macro H5Oget_info().
+ *
+ * \details H5Oget_info2() specifies an object by its identifier, \p loc_id , and 
+ *          retrieves the metadata describing that object in \p oinfo , an H5O_info1_t \c struct.
+ *          This \c struct type is described in H5Oget_info1().
+ *
+ *          The \p fields parameter contains flags to determine which fields will be filled in 
+ *          the H5O_info1_t \c struct returned in \p oinfo. 
+ *          These flags are defined in the H5Opublic.h file:
+ *
+ *          \obj_info_fields
+ *
+ * \note If you are iterating through a lot of different objects to
+ *       retrieve information via the H5Oget_info() family of routines,
+ *       you may see memory building up. This can be due to memory
+ *       allocation for metadata such as object headers and messages
+ *       when the iterated objects are put into the metadata cache.
+ * \note
+ *       If the memory buildup is not desirable, you can configure a
+ *       smaller cache via H5Fset_mdc_config() or set the file access
+ *       property list via H5Pset_mdc_config(). A smaller sized cache
+ *       will force metadata entries to be evicted from the cache,
+ *       thus freeing the memory associated with the entries.
+ *
+ * \since 1.10.3
+ *
+ */
 H5_DLL herr_t H5Oget_info2(hid_t loc_id, H5O_info1_t *oinfo, unsigned fields);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves the metadata for an object, identifying the object 
+ *        by location and relative name
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] name Name of group, relative to \p loc_id
+ * \param[out] oinfo Buffer in which to return object information
+ * \param[in] fields Flags specifying the fields to include in \p oinfo
+ * \lapl_id
+ *
+ * \return \herr_t
+ *
+ * \deprecated As of HDF5-1.12 this function has been deprecated in favor of
+ *             the function H5Oget_info_by_name3() or the macro H5Oget_info_by_name().
+ *
+ * \details H5Oget_info_by_name2() specifies an object’s location and name, \p loc_id and
+ *          \p name, respectively, and retrieves the metadata describing
+ *          that object in \p oinfo, an H5O_info1_t \c struct.
+ *          
+ *          The \c struct H5O_info1_t is defined in H5Opublic.h and described
+ *          in the H5Oget_info1() function entry.
+ *
+ *          The \p fields parameter contains flags to determine which fields
+ *          will be filled in in the H5O_info1_t \c struct returned in
+ *          \p oinfo. These flags are defined in the H5Opublic.h file:
+ *
+ *          \obj_info_fields
+ *
+ *          The link access property list, \p lapl_id, is not currently used; 
+ *          it should be passed in as #H5P_DEFAULT.
+ *
+ * \since 1.10.3
+ *
+ */
 H5_DLL herr_t H5Oget_info_by_name2(hid_t loc_id, const char *name, H5O_info1_t *oinfo, unsigned fields,
                                    hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Retrieves the metadata for an object, identifying the object 
+ *        by an index position
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] group_name Name of group in which object is located
+ * \idx_type
+ * \order
+ * \param[in]  n Position within the index
+ * \param[out] oinfo Buffer in which to return object information
+ * \param[in] fields Flags specifying the fields to include in \p oinfo
+ * \lapl_id
+ *
+ * \return \herr_t
+ *
+ * \deprecated As of HDF5-1.12 this function is deprecated in favor of
+ *             the function H5Oget_info_by_idx3() or the macro #H5Oget_info_by_idx.
+ *
+ * \details H5Oget_info_by_idx2() retrieves the metadata describing an
+ *          object in the \c struct \p oinfo, as specified by the location,
+ *          \p loc_id, group name, \p group_name, the index by which objects
+ *          in that group are tracked, \p idx_type, the order by which the
+ *          index is to be traversed, \p order, and an object’s position
+ *          \p n within that index.
+ *
+ *          \p oinfo, in which the object information is returned, is a \c struct of
+ *          type H5O_info1_t.  This and other \c struct types used 
+ *          by H5Oget_info_by_idx2() are described in H5Oget_info_by_idx1().
+ *
+ *          If \p loc_id fully specifies the group in which the object resides,
+ *          i\p group_name can be a dot (\c .).
+ *
+ *          The \p fields parameter contains flags to determine which fields will be
+ *          filled in the H5O_info1_t \c struct returned in \p oinfo. 
+ *          These flags are defined in the H5Opublic.h file:
+ *          \obj_info_fields
+ *
+ *          The link access property list, \c lapl_id, is not currently used; 
+ *          it should be passed in as #H5P_DEFAULT.
+ *
+ * \since 1.10.3
+ *
+ */
 H5_DLL herr_t H5Oget_info_by_idx2(hid_t loc_id, const char *group_name, H5_index_t idx_type,
                                   H5_iter_order_t order, hsize_t n, H5O_info1_t *oinfo, unsigned fields,
                                   hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Recursively visits all objects accessible from a specified object
+ *
+ * \fgdta_loc_obj_id{obj_id}
+ * \idx_type
+ * \order
+ * \param[in] op Callback function passing data regarding the object 
+ *               to the calling application
+ * \param[in] op_data User-defined pointer to data required by the application 
+ *                    for its processing of the object
+ *
+ * \return On success, returns the return value of the first operator
+ *         that returns a positive value, or zero if all members were
+ *         processed with no operator returning non-zero.
+ *
+ * \return On failure, returns a negative value if something goes wrong
+ *         within the library, or the first negative value returned by
+ *         an operator.
+ *
+ * \deprecated As of HDF5-1.12 this function has been deprecated in favor of
+ *             the function H5Ovisit3() or the macro #H5Ovisit.
+ *
+ * \details H5Ovisit1() is a recursive iteration function to visit the 
+ *          object \p obj_id and, if \p obj_id is a group, all objects in 
+ *          and below it in an HDF5 file, thus providing a mechanism for 
+ *          an application to perform a common set of operations across all 
+ *          of those objects or a dynamically selected subset. For 
+ *          non-recursive iteration across the members of a group, 
+ *          see  H5Literate1().
+ *
+ *          If \p obj_id is a group identifier, that group serves as the
+ *          root of a recursive iteration. If \p obj_id is a file identifier,
+ *          that file’s root group serves as the root of the recursive
+ *          iteration.  If \p obj_id is an attribute identifier, 
+ *          then the object where the attribute is attached will be iterated.
+ *          If \p obj_id is any other type of object, such as a dataset or 
+ *          named datatype, there is no iteration.  
+ *
+ *          Two parameters are used to establish the iteration: \p idx_type
+ *          and \p order.
+ *
+ *          \p idx_type specifies the index to be used. If the links in
+ *          a group have not been indexed by the index type, they will
+ *          first be sorted by that index then the iteration will begin;
+ *          if the links have been so indexed, the sorting step will be
+ *          unnecessary, so the iteration may begin more quickly. Valid
+ *          values include the following:
+ *
+ *          \indexes
+ *
+ *          Note that the index type passed in \p idx_type is a 
+ *          <em>best effort</em> setting. If the application passes in 
+ *          a value indicating iteration in creation order and a group is 
+ *          encountered that was not tracked in creation order, that group 
+ *          will be iterated over in alpha-numeric order by name, or 
+ *          <em>name order</em>.  (<em>Name order</em> is the native order 
+ *          used by the HDF5 library and is always available.)
+ *
+ *          \p order specifies the order in which objects are to be inspected
+ *          along the index specified in \p idx_type. Valid values include
+ *          the following:
+ *
+ *          \orders
+ *
+ *          The prototype of the callback function op is as follows (as
+ *          defined in the source code file H5Opublic.h):
+ *
+ *          \snippet this H5O_iterate1_t_snip
+ *
+ *          The parameters of this callback function have the following values 
+ *          or meanings:
+ *          <table>
+ *          <tr>
+ *              <td>\c obj</td>
+ *              <td>Object that serves as root of the iteration; 
+ *                  same value as the H5Ovisit1() \p obj_id parameter</td>
+ *          </tr>
+ *          <tr>
+ *          <td>\c name</td>
+ *          <td>Name of object, relative to \c obj, being examined at 
+ *              current step of the iteration</td>
+ *          </tr>
+ *          <tr>
+ *              <td>\c info</td>
+ *              <td>H5O_info1_t \c struct containing information 
+ *                  regarding that object</td>
+ *          </tr>
+ *          <tr>
+ *              <td>\c op_data</td>
+ *              <td>User-defined pointer to data required by the application in 
+ *                  processing the object</td>
+ *          </tr>
+ *          </table>
+ *
+ *          The H5O_info1_t \c struct is defined in H5Opublic.h:
+ *          \snippet this H5O_info1_t_snip
+ *
+ *          The return values from an operator are:
+ *          - Zero causes the visit iterator to continue, returning zero when all 
+ *            group members have been processed.
+ *          - A positive value causes the visit iterator to immediately return that 
+ *            positive value, indicating short-circuit success.
+ *          - A negative value causes the visit iterator to immediately return that 
+ *            value, indicating failure.
+ *
+ *          The H5Ovisit1() \p op_data parameter is a user-defined pointer to the data 
+ *          required to process objects in the course of the iteration. This pointer 
+ *          is passed back to each step of the iteration in the callback 
+ *          function’s \p op_data parameter. 
+ *
+ *          H5Lvisit1() and H5Ovisit1() are companion functions: one for
+ *          examining and operating on links; the other for examining
+ *          and operating on the objects that those links point to. Both
+ *          functions ensure that by the time the function completes
+ *          successfully, every link or object below the specified point
+ *          in the file has been presented to the application for whatever
+ *          processing the application requires. These functions assume
+ *          that the membership of the group being iterated over remains
+ *          unchanged through the iteration; if any of the links in the
+ *          group change during the iteration, the resulting behavior
+ *          is undefined.
+ *
+ * \note \Bold{Programming Note for C++ Developers Using C Functions:}
+ * \note If a C routine that takes a function pointer as an argument is
+ *       called from within C++ code, the C routine should be returned
+ *       from normally.
+ *
+ * \note Examples of this kind of routine include callbacks such as
+ *       H5Pset_elink_cb() and H5Pset_type_conv_cb() and 
+ *       functions such as H5Tconvert() and H5Ewalk2().
+ *
+ * \note Exiting the routine in its normal fashion allows the HDF5
+ *       C library to clean up its work properly. In other words, if
+ *       the C++ application jumps out of the routine back to the C++
+ *       “catch” statement, the library is not given the opportunity
+ *       to close any temporary data structures that were set up when
+ *       the routine was called. The C++ application should save some
+ *       state as the routine is started so that any problem that occurs
+ *       might be diagnosed.
+ *      
+ * \version 1.10.5 The macro #H5Ovisit was removed and the function 
+ *          H5Ovisit1() was copied to H5Ovisit().
+ * \version 1.10.3 Function H5Ovisit() was copied to H5Ovisit1(), 
+ *          and the macro #H5Ovisit was created.
+ * \version 1.8.8 Fortran subroutine introduced in this release.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t H5Ovisit1(hid_t obj_id, H5_index_t idx_type, H5_iter_order_t order, H5O_iterate1_t op,
                         void *op_data);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Recursively visits all objects starting from a specified object
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] obj_name Name of the object, generally relative to
+ *                     \p loc_id, that will serve as root of the iteration
+ * \idx_type
+ * \order
+ * \param[in] op Callback function passing data regarding the object 
+ *               to the calling application
+ * \param[in] op_data User-defined pointer to data required by the application 
+ *                    for its processing of the object
+ * \lapl_id
+ *
+ * \return On success, returns the return value of the first operator
+ *         that returns a positive value, or zero if all members were
+ *         processed with no operator returning non-zero.
+ *
+ * \return On failure, returns a negative value if something goes wrong
+ *         within the library, or the first negative value returned by
+ *         an operator.
+ *
+ * \deprecated As of HDF5-1.12 this function has been deprecated in favor of
+ *             the function H5Ovisit_by_name3() or the macro #H5Ovisit_by_name.
+ *
+ * \details H5Ovisit_by_name1() is a recursive iteration function to visit 
+ *          the object specified by the \p loc_id / \p obj_name parameter 
+ *          pair and, if that object is a group, all objects in and below it 
+ *          in an HDF5 file, thus providing a mechanism for an application to 
+ *          perform a common set of operations across all of those objects or 
+ *          a dynamically selected subset. For non-recursive iteration across 
+ *          the members of a group, see H5Literate1().
+ *
+ *          The object serving as the root of the iteration is specified
+ *          by the \p loc_id / \p obj_name parameter pair. \p loc_id specifies
+ *          a file or an object in a file;  if \p loc_id is an attribute identifier,
+ *          the object where the attribute is attached will be used.
+ *          \p obj_name specifies either an object in the file (with an absolute 
+ *          name based in the file’s root group) or an object name relative 
+ *          to \p loc_id. If \p loc_id fully specifies the object that is to serve
+ *          as the root of the iteration, \p obj_name should be '\c .' (a dot). 
+ *          (Note that when \p loc_id fully specifies the object that is to serve
+ *          as the root of the iteration, the user may wish to consider
+ *          using H5Ovisit1() instead of H5Ovisit_by_name1().)
+ *
+ *          Two parameters are used to establish the iteration: \p idx_type
+ *          and \p order.
+ *
+ *          \p idx_type specifies the index to be used. If the links in
+ *          a group have not been indexed by the index type, they will
+ *          first be sorted by that index then the iteration will begin;
+ *          if the links have been so indexed, the sorting step will be
+ *          unnecessary, so the iteration may begin more quickly. Valid
+ *          values include the following:
+ *
+ *          \indexes
+ *
+ *          Note that the index type passed in \p idx_type is a 
+ *          <em>best effort</em> setting. If the application passes in a 
+ *          value indicating iteration in creation order and a group is 
+ *          encountered that was not tracked in creation order, that group 
+ *          will be iterated over in alpha-numeric order by name, or 
+ *          <em>name order</em>.  (<em>Name order</em> is the native order 
+ *          used by the HDF5 library and is always available.)
+ *
+ *          \p order specifies the order in which objects are to be inspected
+ *          along the index specified in \p idx_type. Valid values include
+ *          the following:
+ *
+ *          \orders
+ *
+ *          The \p op callback function and the effect of the callback
+ *          function’s return value on the application are described
+ *          in H5Ovisit1().
+ *
+ *          The H5O_info1_t \c struct is defined in H5Opublic.h
+ *          and described in the H5Oget_info1() function entry.
+ *
+ *          The H5Ovisit_by_name1() \p op_data parameter is a user-defined
+ *          pointer to the data required to process objects in the course
+ *          of the iteration. This pointer is passed back to each step of
+ *          the iteration in the callback function’s \p op_data parameter.
+ *
+ *          \p lapl_id is a link access property list. In the general case,
+ *          when default link access properties are acceptable, this can
+ *          be passed in as #H5P_DEFAULT. An example of a situation that
+ *          requires a non-default link access property list is when
+ *          the link is an external link; an external link may require
+ *          that a link prefix be set in a link access property list
+ *          (see H5Pset_elink_prefix()).
+ *
+ *          H5Lvisit_by_name1() and H5Ovisit_by_name1() are companion 
+ *          functions: one for examining and operating on links; the other 
+ *          for examining and operating on the objects that those links point to. 
+ *          Both functions ensure that by the time the function completes
+ *          successfully, every link or object below the specified point
+ *          in the file has been presented to the application for whatever
+ *          processing the application requires.
+ *
+ * \note \Bold{Programming Note for C++ Developers Using C Functions:}
+ * \note If a C routine that takes a function pointer as an argument is
+ *       called from within C++ code, the C routine should be returned
+ *       from normally.
+ *
+ * \note Examples of this kind of routine include callbacks such as
+ *       H5Pset_elink_cb() and H5Pset_type_conv_cb() and 
+ *       functions such as H5Tconvert() and H5Ewalk2().
+ *
+ * \note Exiting the routine in its normal fashion allows the HDF5
+ *       C library to clean up its work properly. In other words, if
+ *       the C++ application jumps out of the routine back to the C++
+ *       “catch” statement, the library is not given the opportunity
+ *       to close any temporary data structures that were set up when
+ *       the routine was called. The C++ application should save some
+ *       state as the routine is started so that any problem that occurs
+ *       might be diagnosed.
+ *
+ * \version 1.10.5 The macro #H5Ovisit_by_name was removed and the function 
+ *          H5Ovisit_by_name1() was copied to #H5Ovisit_by_name.
+ * \version 1.10.3 The H5Ovisit_by_name() function was renamed to H5Ovisit_by_name1(), 
+ *          and the macro #H5Ovisit_by_name was created.
+ * \version 1.8.11 Fortran subroutine introduced in this release.
+ *
+ * \since 1.8.0
+ *
+ */
 H5_DLL herr_t H5Ovisit_by_name1(hid_t loc_id, const char *obj_name, H5_index_t idx_type,
                                 H5_iter_order_t order, H5O_iterate1_t op, void *op_data, hid_t lapl_id);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Recursively visits all objects accessible from a specified object
+ *
+ * \fgdta_loc_obj_id{obj_id}
+ * \idx_type
+ * \order
+ * \param[in] op Callback function passing data regarding the object 
+ *               to the calling application
+ * \param[in] op_data User-defined pointer to data required by the application 
+ *                    for its processing of the object
+ * \param[in] fields Flags specifying the fields to be retrieved to the 
+ *                   callback \p op
+ *
+ * \return On success, returns the return value of the first operator
+ *         that returns a positive value, or zero if all members were
+ *         processed with no operator returning non-zero.
+ *
+ * \return On failure, returns a negative value if something goes wrong
+ *         within the library, or the first negative value returned by
+ *         an operator.
+ *
+ * \deprecated As of HDF5-1.12 this function has been deprecated in favor of
+ *             the function H5Ovisit3() or the macro #H5Ovisit.
+ *
+ * \details H5Ovisit2() is a recursive iteration function to visit the 
+ *          object \p obj_id and, if \p obj_id is a group, all objects in 
+ *          and below it in an HDF5 file, thus providing a mechanism for 
+ *          an application to perform a common set of operations across all 
+ *          of those objects or a dynamically selected subset. For 
+ *          non-recursive iteration across the members of a group, 
+ *          see H5Literate1().
+ *
+ *          If \p obj_id is a group identifier, that group serves as the
+ *          root of a recursive iteration. If \p obj_id is a file identifier,
+ *          that file’s root group serves as the root of the recursive
+ *          iteration.  If \p obj_id is an attribute identifier, 
+ *          then the object where the attribute is attached will be iterated.
+ *          If \p obj_id is any other type of object, such as a dataset or 
+ *          named datatype, there is no iteration.  
+ *
+ *          Two parameters are used to establish the iteration: \p idx_type
+ *          and \p order.
+ *
+ *          \p idx_type specifies the index to be used. If the links in
+ *          a group have not been indexed by the index type, they will
+ *          first be sorted by that index then the iteration will begin;
+ *          if the links have been so indexed, the sorting step will be
+ *          unnecessary, so the iteration may begin more quickly. Valid
+ *          values include the following:
+ *
+ *          \indexes
+ *
+ *          Note that the index type passed in \p idx_type is a 
+ *          <em>best effort</em> setting. If the application passes in 
+ *          a value indicating iteration in creation order and a group is 
+ *          encountered that was not tracked in creation order, that group 
+ *          will be iterated over in alpha-numeric order by name, or 
+ *          <em>name order</em>.  (<em>Name order</em> is the native order 
+ *          used by the HDF5 library and is always available.)
+ *
+ *          \p order specifies the order in which objects are to be inspected
+ *          along the index specified in \p idx_type. Valid values include
+ *          the following:
+ *
+ *          \orders
+ *
+ *          The prototype of the callback function op is as follows (as
+ *          defined in the source code file H5Opublic.h):
+ *
+ *          \snippet this H5O_iterate1_t_snip
+ *
+ *          The parameters of this callback function have the following values 
+ *          or meanings:
+ *          <table>
+ *          <tr>
+ *              <td>\c obj</td>
+ *              <td>Object that serves as root of the iteration; 
+ *                  same value as the H5Ovisit1() \p obj_id parameter</td>
+ *          </tr>
+ *          <tr>
+ *          <td>\c name</td>
+ *          <td>Name of object, relative to \c obj, being examined at 
+ *              current step of the iteration</td>
+ *          </tr>
+ *          <tr>
+ *              <td>\c info</td>
+ *              <td>H5O_info1_t \c struct containing information 
+ *                  regarding that object</td>
+ *          </tr>
+ *          <tr>
+ *              <td>\c op_data</td>
+ *              <td>User-defined pointer to data required by the application in 
+ *                  processing the object; a pass-through of the \c op_data pointer 
+ *                  provided with the H5Ovisit() function call</td>
+ *          </tr>
+ *          </table>
+ *
+ *          The H5O_info1_t \c struct is defined in H5Opublic.h and
+ *          described in the H5Oget_info1() function entry.
+ *
+ *          The return values from an operator are:
+ *          - Zero causes the visit iterator to continue, returning zero when all 
+ *            group members have been processed.
+ *          - A positive value causes the visit iterator to immediately return that 
+ *            positive value, indicating short-circuit success.
+ *          - A negative value causes the visit iterator to immediately return that 
+ *            value, indicating failure.
+ *
+ *          The H5Ovisit2() \p op_data parameter is a user-defined pointer to the data 
+ *          required to process objects in the course of the iteration. This pointer 
+ *          is passed back to each step of the iteration in the callback 
+ *          function’s \p op_data parameter. 
+ *
+ *          The \p fields parameter contains flags to determine which fields will 
+ *          be retrieved by the \p op callback function. These flags are defined 
+ *          in the H5Opublic.h file:
+ *          \obj_info_fields
+ *
+ *          H5Lvisit() and H5Ovisit() are companion functions: one for
+ *          examining and operating on links; the other for examining
+ *          and operating on the objects that those links point to. Both
+ *          functions ensure that by the time the function completes
+ *          successfully, every link or object below the specified point
+ *          in the file has been presented to the application for whatever
+ *          processing the application requires. These functions assume
+ *          that the membership of the group being iterated over remains
+ *          unchanged through the iteration; if any of the links in the
+ *          group change during the iteration, the resulting behavior
+ *          is undefined.
+ *
+ * \note \Bold{Programming Note for C++ Developers Using C Functions:}
+ * \note If a C routine that takes a function pointer as an argument is
+ *       called from within C++ code, the C routine should be returned
+ *       from normally.
+ *
+ * \note Examples of this kind of routine include callbacks such as
+ *       H5Pset_elink_cb() and H5Pset_type_conv_cb() and 
+ *       functions such as H5Tconvert() and H5Ewalk2().
+ *
+ * \note Exiting the routine in its normal fashion allows the HDF5
+ *       C library to clean up its work properly. In other words, if
+ *       the C++ application jumps out of the routine back to the C++
+ *       “catch” statement, the library is not given the opportunity
+ *       to close any temporary data structures that were set up when
+ *       the routine was called. The C++ application should save some
+ *       state as the routine is started so that any problem that occurs
+ *       might be diagnosed.
+ *      
+ * \since 1.10.3
+ *
+ */
 H5_DLL herr_t H5Ovisit2(hid_t obj_id, H5_index_t idx_type, H5_iter_order_t order, H5O_iterate1_t op,
                         void *op_data, unsigned fields);
+
+/**
+ *-------------------------------------------------------------------------
+ * \ingroup H5O
+ *
+ * \brief Recursively visits all objects starting from a specified object
+ *
+ * \fgdta_loc_obj_id{loc_id}
+ * \param[in] obj_name Name of the object, generally relative to
+ *                     \p loc_id, that will serve as root of the iteration
+ * \idx_type
+ * \order
+ * \param[in] op Callback function passing data regarding the object 
+ *               to the calling application
+ * \param[in] op_data User-defined pointer to data required by the application 
+ *                    for its processing of the object
+ * \param[in] fields Flags specifying the fields to be retrieved to the 
+ *                   callback function \p op
+ * \lapl_id
+ *
+ * \return On success, returns the return value of the first operator
+ *         that returns a positive value, or zero if all members were
+ *         processed with no operator returning non-zero.
+ *
+ * \return On failure, returns a negative value if something goes wrong
+ *         within the library, or the first negative value returned by
+ *         an operator.
+ *
+ * \deprecated As of HDF5-1.12 this function has been deprecated in favor of
+ *             the function H5Ovisit_by_name3() or the macro #H5Ovisit_by_name.
+ *
+ * \details H5Ovisit_by_name2() is a recursive iteration function to visit 
+ *          the object specified by the \p loc_id / \p obj_name parameter 
+ *          pair and, if that object is a group, all objects in and below it 
+ *          in an HDF5 file, thus providing a mechanism for an application to 
+ *          perform a common set of operations across all of those objects or 
+ *          a dynamically selected subset. For non-recursive iteration across 
+ *          the members of a group, see #H5Literate.
+ *
+ *          The object serving as the root of the iteration is specified
+ *          by the \p loc_id / \p obj_name parameter pair. \p loc_id specifies
+ *          a file or an object in a file;  if \p loc_id is an attribute identifier,
+ *          the object where the attribute is attached will be used.
+ *          \p obj_name specifies either an object in the file (with an absolute 
+ *          name based in the file’s root group) or an object name relative 
+ *          to \p loc_id. If \p loc_id fully specifies the object that is to serve
+ *          as the root of the iteration, \p obj_name should be '\c .' (a dot). 
+ *          (Note that when \p loc_id fully specifies the object that is to serve
+ *          as the root of the iteration, the user may wish to consider
+ *          using H5Ovisit2() instead of #H5Ovisit_by_name.)
+ *
+ *          Two parameters are used to establish the iteration: \p idx_type
+ *          and \p order.
+ *
+ *          \p idx_type specifies the index to be used. If the links in
+ *          a group have not been indexed by the index type, they will
+ *          first be sorted by that index then the iteration will begin;
+ *          if the links have been so indexed, the sorting step will be
+ *          unnecessary, so the iteration may begin more quickly. Valid
+ *          values include the following:
+ *
+ *          \indexes
+ *
+ *          Note that the index type passed in \p idx_type is a 
+ *          <em>best effort</em> setting. If the application passes in a 
+ *          value indicating iteration in creation order and a group is 
+ *          encountered that was not tracked in creation order, that group 
+ *          will be iterated over in alpha-numeric order by name, or 
+ *          <em>name order</em>.  (<em>Name order</em> is the native order 
+ *          used by the HDF5 library and is always available.)
+ *
+ *          \p order specifies the order in which objects are to be inspected
+ *          along the index specified in \p idx_type. Valid values include
+ *          the following:
+ *
+ *          \orders
+ *
+ *          The \p op callback function and the effect of the callback
+ *          function’s return value on the application are described
+ *          in H5Ovisit2().
+ *
+ *          The H5O_info1_t \c struct is defined in H5Opublic.h
+ *          and described in the H5Oget_info1() function entry.
+ *
+ *          The H5Ovisit_by_name2() \p op_data parameter is a user-defined
+ *          pointer to the data required to process objects in the course
+ *          of the iteration. This pointer is passed back to each step of
+ *          the iteration in the callback function’s \p op_data parameter.
+ *
+ *          \p lapl_id is a link access property list. In the general case,
+ *          when default link access properties are acceptable, this can
+ *          be passed in as #H5P_DEFAULT. An example of a situation that
+ *          requires a non-default link access property list is when
+ *          the link is an external link; an external link may require
+ *          that a link prefix be set in a link access property list
+ *          (see H5Pset_elink_prefix()).
+ *
+ *          The \p fields parameter contains flags to determine which fields will 
+ *          be retrieved by the \p op callback function. These flags are defined 
+ *          in the H5Opublic.h file:
+ *          \obj_info_fields
+ *
+ *          #H5Lvisit_by_name and #H5Ovisit_by_name are companion 
+ *          functions: one for examining and operating on links; the other 
+ *          for examining and operating on the objects that those links point to. 
+ *          Both functions ensure that by the time the function completes
+ *          successfully, every link or object below the specified point
+ *          in the file has been presented to the application for whatever
+ *          processing the application requires.
+ *
+ * \note \Bold{Programming Note for C++ Developers Using C Functions:}
+ * \note If a C routine that takes a function pointer as an argument is
+ *       called from within C++ code, the C routine should be returned
+ *       from normally.
+ *
+ * \note Examples of this kind of routine include callbacks such as
+ *       H5Pset_elink_cb() and H5Pset_type_conv_cb() and 
+ *       functions such as H5Tconvert() and H5Ewalk2().
+ *
+ * \note Exiting the routine in its normal fashion allows the HDF5
+ *       C library to clean up its work properly. In other words, if
+ *       the C++ application jumps out of the routine back to the C++
+ *       “catch” statement, the library is not given the opportunity
+ *       to close any temporary data structures that were set up when
+ *       the routine was called. The C++ application should save some
+ *       state as the routine is started so that any problem that occurs
+ *       might be diagnosed.
+ *      
+ * \since 1.10.3
+ *
+ */
 H5_DLL herr_t H5Ovisit_by_name2(hid_t loc_id, const char *obj_name, H5_index_t idx_type,
                                 H5_iter_order_t order, H5O_iterate1_t op, void *op_data, unsigned fields,
                                 hid_t lapl_id);
diff --git a/test/links.c b/test/links.c
index 11b760c..784a8eb 100644
--- a/test/links.c
+++ b/test/links.c
@@ -631,6 +631,8 @@ cklinks(hid_t fapl, hbool_t new_format)
     if ((file = H5Fopen(filename, H5F_ACC_RDONLY, fapl)) < 0)
         FAIL_STACK_ERROR
 
+//! [H5Otoken_cmp_snip]
+
     /* Hard link */
     if (H5Oget_info_by_name3(file, "d1", &oinfo1, H5O_INFO_BASIC, H5P_DEFAULT) < 0)
         FAIL_STACK_ERROR
@@ -641,6 +643,9 @@ cklinks(hid_t fapl, hbool_t new_format)
         HDprintf("    %d: Unexpected object type should have been a dataset\n", __LINE__);
         TEST_ERROR
     } /* end if */
+
+//! [H5Otoken_cmp_snip]
+
     if (H5Otoken_cmp(file, &oinfo1.token, &oinfo2.token, &token_cmp) < 0)
         FAIL_STACK_ERROR
     if (token_cmp) {
@@ -15794,12 +15799,16 @@ obj_visit(hid_t fapl, hbool_t new_format)
     if ((fid = build_visit_file(fapl)) < 0)
         TEST_ERROR
 
+//! [H5Ovisit3_snip]
+
     /* Visit all the objects reachable from the root group (with file ID) */
     udata.idx  = 0;
     udata.info = new_format ? ovisit0_new : ovisit0_old;
     if (H5Ovisit3(fid, H5_INDEX_NAME, H5_ITER_INC, visit_obj_cb, &udata, H5O_INFO_BASIC) < 0)
         FAIL_STACK_ERROR
 
+//! [H5Ovisit3_snip]
+
     /* Visit all the objects reachable from the root group (with group ID) */
     if ((gid = H5Gopen2(fid, "/", H5P_DEFAULT)) < 0)
         FAIL_STACK_ERROR
@@ -15871,6 +15880,8 @@ obj_visit_by_name(hid_t fapl, hbool_t new_format)
     if ((fid = build_visit_file(fapl)) < 0)
         TEST_ERROR
 
+//! [H5Ovisit_by_name3_snip]
+
     /* Visit all the objects reachable from the root group (with file ID) */
     udata.idx  = 0;
     udata.info = new_format ? ovisit0_new : ovisit0_old;
@@ -15878,6 +15889,8 @@ obj_visit_by_name(hid_t fapl, hbool_t new_format)
                           H5P_DEFAULT) < 0)
         FAIL_STACK_ERROR
 
+//! [H5Ovisit_by_name3_snip]
+
     /* Visit all the objects reachable from the root group (with group ID) */
     if ((gid = H5Gopen2(fid, "/", H5P_DEFAULT)) < 0)
         FAIL_STACK_ERROR
diff --git a/test/tfile.c b/test/tfile.c
index 1b334f2..9a94a7d 100644
--- a/test/tfile.c
+++ b/test/tfile.c
@@ -5182,7 +5182,12 @@ test_libver_bounds_real(H5F_libver_t libver_create, unsigned oh_vers_create, H5F
     group = H5Gcreate2(file, "/G1", H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
     CHECK(group, FAIL, "H5Gcreate");
 
+//! [H5Oget_native_info_snip]
+
     ret = H5Oget_native_info(group, &ninfo, H5O_NATIVE_INFO_HDR);
+
+//! [H5Oget_native_info_snip]
+
     CHECK(ret, FAIL, "H5Oget_native)info");
     VERIFY(ninfo.hdr.version, oh_vers_mod, "H5Oget_native_info");
 
@@ -5203,10 +5208,15 @@ test_libver_bounds_real(H5F_libver_t libver_create, unsigned oh_vers_create, H5F
     ret = H5Gclose(group);
     CHECK(ret, FAIL, "H5Gclose");
 
+//! [H5Oget_native_info_by_name_snip]
+
     /*
      * Make sure the root group still has the correct object header version
      */
     ret = H5Oget_native_info_by_name(file, "/", &ninfo, H5O_NATIVE_INFO_HDR, H5P_DEFAULT);
+
+//! [H5Oget_native_info_by_name_snip]
+
     CHECK(ret, FAIL, "H5Oget_native_info_by_name");
     VERIFY(ninfo.hdr.version, oh_vers_create, "H5Oget_native_info_by_name");
 
diff --git a/test/titerate.c b/test/titerate.c
index 050dcec..0b20d8d 100644
--- a/test/titerate.c
+++ b/test/titerate.c
@@ -218,9 +218,14 @@ test_iter_group(hid_t fapl, hbool_t new_format)
                                          dataset_name, (size_t)NAMELEN, H5P_DEFAULT);
         CHECK(ret, FAIL, "H5Lget_name_by_idx");
 
+//! [H5Oget_info_by_idx3_snip]
+
         ret = H5Oget_info_by_idx3(root_group, ".", H5_INDEX_NAME, H5_ITER_INC, (hsize_t)i, &oinfo,
                                   H5O_INFO_BASIC, H5P_DEFAULT);
         CHECK(ret, FAIL, "H5Oget_info_by_idx");
+
+//! [H5Oget_info_by_idx3_snip]
+
     } /* end for */
 
     H5E_BEGIN_TRY
diff --git a/test/vol.c b/test/vol.c
index b08f112..53c760c 100644
--- a/test/vol.c
+++ b/test/vol.c
@@ -950,10 +950,14 @@ test_basic_object_operation(void)
     if (H5Oget_info3(fid, &object_info, H5O_INFO_ALL) < 0)
         TEST_ERROR;
 
+//! [H5Oget_info_by_name3_snip]
+
     /* H5Oget_info_by_name */
     if (H5Oget_info_by_name3(fid, NATIVE_VOL_TEST_GROUP_NAME, &object_info, H5O_INFO_ALL, H5P_DEFAULT) < 0)
         TEST_ERROR;
 
+//! [H5Oget_info_by_name3_snip]
+
     /* H5Oexists_by_name */
     if (H5Oexists_by_name(fid, NATIVE_VOL_TEST_GROUP_NAME, H5P_DEFAULT) != TRUE)
         TEST_ERROR;