[svn-r10066] Purpose:

Libtool upgrade

Description:
HDF5 was using libtool 1.4.2.  Upgraded to libtool 1.5.14.

Platforms tested:
verbena, heping, pommier, copper, modi4, arabica

52 files changed, 20368 insertions, 5296 deletions

diff --git a/Makefile.in b/Makefile.in
index 68c87f7..5eeb2ce 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -110,6 +110,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -117,6 +118,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -140,6 +143,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/aclocal.m4 b/aclocal.m4
index 7a9163e..e29dd17 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -871,12 +871,63 @@ AC_DEFUN([AM_MAINTAINER_MODE],
 ]
 )
 
-# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 
-# serial 46 AC_PROG_LIBTOOL
+# serial 47 AC_PROG_LIBTOOL
 
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If this macro is not defined by Autoconf, define it here.
+m4_ifdef([AC_PROVIDE_IFELSE],
+         [],
+         [m4_define([AC_PROVIDE_IFELSE],
+	         [m4_ifdef([AC_PROVIDE_$1],
+		           [$2], [$3])])])
+
+
+# AC_PROG_LIBTOOL
+# ---------------
 AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+  AC_PROVIDE_IFELSE([AC_PROG_CXX],
+    [AC_LIBTOOL_CXX],
+    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+  ])])
+dnl And a similar setup for Fortran 77 support
+  AC_PROVIDE_IFELSE([AC_PROG_F77],
+    [AC_LIBTOOL_F77],
+    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+    [AC_LIBTOOL_GCJ],
+    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+      [AC_LIBTOOL_GCJ],
+      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+	[AC_LIBTOOL_GCJ],
+      [ifdef([AC_PROG_GCJ],
+	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([A][M_PROG_GCJ],
+	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([LT_AC_PROG_GCJ],
+	     [define([LT_AC_PROG_GCJ],
+		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
+])])# AC_PROG_LIBTOOL
+
+
+# _AC_PROG_LIBTOOL
+# ----------------
+AC_DEFUN([_AC_PROG_LIBTOOL],
 [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
 
 # This can be used to rebuild libtool when needed
 LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
@@ -887,10 +938,13 @@ AC_SUBST(LIBTOOL)dnl
 
 # Prevent multiple expansion
 define([AC_PROG_LIBTOOL], [])
-])
+])# _AC_PROG_LIBTOOL
+
 
+# AC_LIBTOOL_SETUP
+# ----------------
 AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
+[AC_PREREQ(2.50)dnl
 AC_REQUIRE([AC_ENABLE_SHARED])dnl
 AC_REQUIRE([AC_ENABLE_STATIC])dnl
 AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
@@ -900,340 +954,186 @@ AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_PROG_LD])dnl
 AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
 AC_REQUIRE([AC_PROG_NM])dnl
+
 AC_REQUIRE([AC_PROG_LN_S])dnl
 AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
 AC_REQUIRE([AC_OBJEXT])dnl
 AC_REQUIRE([AC_EXEEXT])dnl
 dnl
 
-_LT_AC_PROG_ECHO_BACKSLASH
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+AC_LIBTOOL_SYS_MAX_CMD_LEN
+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+AC_LIBTOOL_OBJDIR
 
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+_LT_AC_PROG_ECHO_BACKSLASH
 
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
   fi
   ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
 esac
 
-_LT_AC_LTCONFIG_HACK
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
 
-])
+# Same as above, but do not quote variable references.
+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
 
-# AC_LIBTOOL_HEADER_ASSERT
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
-[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
-    [lt_cv_func_assert_works],
-    [case $host in
-    *-*-solaris*)
-      if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
-        case `$CC --version 2>/dev/null` in
-        [[12]].*) lt_cv_func_assert_works=no ;;
-        *)        lt_cv_func_assert_works=yes ;;
-        esac
-      fi
-      ;;
-    esac])
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
-if test "x$lt_cv_func_assert_works" = xyes; then
-  AC_CHECK_HEADERS(assert.h)
-fi
-])# AC_LIBTOOL_HEADER_ASSERT
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
 
-# _LT_AC_CHECK_DLFCN
-# --------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)
-])# _LT_AC_CHECK_DLFCN
+# Constants:
+rm="rm -f"
 
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
 
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
+AC_CHECK_TOOL(AR, ar, false)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
 
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
 
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
 
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
 
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    ;;
+  *)
+    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
 
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-irix*)
-  symcode='[[BCDEGRST]]'
-  ;;
-solaris* | sysv5*)
-  symcode='[[BDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
 
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    AC_PATH_MAGIC
+  fi
   ;;
 esac
 
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[[ABCDGISTW]]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
 
-  # Write the raw and C identifiers.
-lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+	[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
+AC_ARG_WITH([pic],
+    [AC_HELP_STRING([--with-pic],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+test -z "$pic_mode" && pic_mode=default
 
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
+# Use C for the default configuration in the libtool script
+tagname=
+AC_LIBTOOL_LANG_C_CONFIG
+_LT_AC_TAGCONFIG
+])# AC_LIBTOOL_SETUP
 
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
 
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
+# _LT_AC_SYS_COMPILER
+# -------------------
+AC_DEFUN([_LT_AC_SYS_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
 
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr) 0}
-};
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_AC_SYS_COMPILER
 
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  save_LIBS="$LIBS"
-	  save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$save_LIBS"
-	  CFLAGS="$save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AC_FD_CC
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AC_FD_CC
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
-    fi
-  else
-    echo "$progname: failed program was:" >&AC_FD_CC
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
 
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  global_symbol_to_cdecl=
-  global_symbol_to_c_name_address=
-else
-  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
-  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
-fi
-if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
-then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# _LT_AC_SYS_LIBPATH_AIX
+# ----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_AC_SYS_LIBPATH_AIX
+
+
+# _LT_AC_SHELL_INIT(ARG)
+# ----------------------
+AC_DEFUN([_LT_AC_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+	 [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_AC_SHELL_INIT
 
-# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-# ---------------------------------
-AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR],
-[# Find the correct PATH separator.  Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
-  UNAME=${UNAME-`uname 2>/dev/null`}
-  case X$UNAME in
-    *-DOS) lt_cv_sys_path_separator=';' ;;
-    *)     lt_cv_sys_path_separator=':' ;;
-  esac
-  PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
 
 # _LT_AC_PROG_ECHO_BACKSLASH
 # --------------------------
 # Add some code to the start of the generated configure script which
 # will find an echo command which doesn't interpret backslashes.
 AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-			      [AC_DIVERT_PUSH(NOTICE)])
-_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-
+[_LT_AC_SHELL_INIT([
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
@@ -1251,7 +1151,7 @@ if test "X[$]1" = X--no-reexec; then
 elif test "X[$]1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
   # Yippee, $echo works!
   :
 else
@@ -1263,14 +1163,14 @@ if test "X[$]1" = X--fallback-echo; then
   # used as fallback echo
   shift
   cat <<EOF
-$*
+[$]*
 EOF
   exit 0
 fi
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test -z "$ECHO"; then
 if test "X${echo_test_string+set}" != Xset; then
@@ -1297,8 +1197,9 @@ else
   #
   # So, first we look for a working echo in the user's PATH.
 
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for dir in $PATH /usr/ucb; do
+    IFS="$lt_save_ifs"
     if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
        test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
        echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
@@ -1307,7 +1208,7 @@ else
       break
     fi
   done
-  IFS="$save_ifs"
+  IFS="$lt_save_ifs"
 
   if test "X$echo" = Xecho; then
     # We didn't find a better echo, so look for alternatives.
@@ -1380,17 +1281,324 @@ if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
 fi
 
 AC_SUBST(ECHO)
-AC_DIVERT_POP
-])# _LT_AC_PROG_ECHO_BACKSLASH
+])])# _LT_AC_PROG_ECHO_BACKSLASH
+
+
+# _LT_AC_LOCK
+# -----------
+AC_DEFUN([_LT_AC_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+	[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+  ])
+esac
+
+need_locks="$enable_libtool_lock"
+
+])# _LT_AC_LOCK
+
+
+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
+[AC_REQUIRE([LT_AC_PROG_SED])
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s conftest.err; then
+       $2=yes
+     fi
+   fi
+   $rm conftest*
+])
+
+if test x"[$]$2" = xyes; then
+    ifelse([$5], , :, [$5])
+else
+    ifelse([$6], , :, [$6])
+fi
+])# AC_LIBTOOL_COMPILER_OPTION
+
+
+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                          [ACTION-SUCCESS], [ACTION-FAILURE])
+# ------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+[AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+     else
+       $2=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+    ifelse([$4], , :, [$4])
+else
+    ifelse([$5], , :, [$5])
+fi
+])# AC_LIBTOOL_LINKER_OPTION
+
+
+# AC_LIBTOOL_SYS_MAX_CMD_LEN
+# --------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
+[# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    ;;
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    # 
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  *)
+    # If test is not a shell built-in, we'll probably end up computing a
+    # maximum length that is only half of the actual maximum length, but
+    # we can't tell.
+    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	    lt_cv_sys_max_cmd_len=$new_result &&
+	    test $i != 17 # 1/2 MB should be enough
+    do
+      i=`expr $i + 1`
+      teststring=$teststring$teststring
+    done
+    teststring=
+    # Add a significant safety factor because C++ compilers can tack on massive
+    # amounts of additional arguments before passing them to the linker.
+    # It appears as though 1/2 is a usable value.
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    ;;
+  esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+
+
+# _LT_AC_CHECK_DLFCN
+# --------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)dnl
+])# _LT_AC_CHECK_DLFCN
+
 
 # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
 #                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
 # ------------------------------------------------------------------
 AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[if test "$cross_compiling" = yes; then :
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
   [$4]
 else
-  AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
@@ -1471,10 +1679,12 @@ fi
 rm -fr conftest*
 ])# _LT_AC_TRY_DLOPEN_SELF
 
+
 # AC_LIBTOOL_DLOPEN_SELF
 # -------------------
 AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[if test "x$enable_dlopen" != xyes; then
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
@@ -1489,24 +1699,39 @@ else
     lt_cv_dlopen_self=yes
     ;;
 
-  cygwin* | mingw* | pw32*)
+  mingw* | pw32*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
    ;;
 
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+   ;;
+
   *)
     AC_CHECK_FUNC([shl_load],
-          [lt_cv_dlopen="shl_load"],
+	  [lt_cv_dlopen="shl_load"],
       [AC_CHECK_LIB([dld], [shl_load],
-            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
 	[AC_CHECK_FUNC([dlopen],
 	      [lt_cv_dlopen="dlopen"],
 	  [AC_CHECK_LIB([dl], [dlopen],
-	        [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
 	    [AC_CHECK_LIB([svld], [dlopen],
-	          [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
 	      [AC_CHECK_LIB([dld], [dld_link],
-	            [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
 	      ])
 	    ])
 	  ])
@@ -1524,7 +1749,6 @@ else
   case $lt_cv_dlopen in
   dlopen)
     save_CPPFLAGS="$CPPFLAGS"
-    AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
     test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
     save_LDFLAGS="$LDFLAGS"
@@ -1568,404 +1792,64 @@ else
 fi
 ])# AC_LIBTOOL_DLOPEN_SELF
 
-AC_DEFUN([_LT_AC_LTCONFIG_HACK],
-[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-need_locks="$enable_libtool_lock"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-if test x"$host" != x"$build"; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case $host_os in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-    ;;
-  *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="[$]2"
-
-AC_MSG_CHECKING([for objdir])
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-AC_MSG_RESULT($objdir)
-
-
-AC_ARG_WITH(pic,
-[  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-pic_mode="$withval", pic_mode=default)
-test -z "$pic_mode" && pic_mode=default
-
-# We assume here that the value for lt_cv_prog_cc_pic will not be cached
-# in isolation, and that seeing it set (from the cache) indicates that
-# the associated values are set (in the cache) correctly too.
-AC_MSG_CHECKING([for $compiler option to produce PIC])
-AC_CACHE_VAL(lt_cv_prog_cc_pic,
-[ lt_cv_prog_cc_pic=
-  lt_cv_prog_cc_shlib=
-  lt_cv_prog_cc_wl=
-  lt_cv_prog_cc_static=
-  lt_cv_prog_cc_no_builtin=
-  lt_cv_prog_cc_can_build_shared=$can_build_shared
-
-  if test "$GCC" = yes; then
-    lt_cv_prog_cc_wl='-Wl,'
-    lt_cv_prog_cc_static='-static'
-
-    case $host_os in
-    aix*)
-      # Below there is a dirty hack to force normal static linking with -ldl
-      # The problem is because libdl dynamically linked with both libc and
-      # libC (AIX C++ library), which obviously doesn't included in libraries
-      # list by gcc. This cause undefined symbols with -static flags.
-      # This hack allows C programs to be linked with "-static -ldl", but
-      # not sure about C++ programs.
-      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_cv_prog_cc_pic='-fno-common'
-      ;;
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_cv_prog_cc_pic='-DDLL_EXPORT'
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	 lt_cv_prog_cc_pic=-Kconform_pic
-      fi
-      ;;
-    *)
-      lt_cv_prog_cc_pic='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for PIC flags for the system compiler.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      lt_cv_prog_cc_wl='-Wl,'
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_cv_prog_cc_static='-Bstatic'
-      else
-	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
-      lt_cv_prog_cc_pic='+Z'
-      ;;
-
-    irix5* | irix6*)
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static='-non_shared'
-      # PIC (with -KPIC) is the default.
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_cv_prog_cc_pic='-DDLL_EXPORT'
-      ;;
-
-    newsos6)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      # All OSF/1 code is PIC.
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      lt_cv_prog_cc_pic='-Kpic'
-      lt_cv_prog_cc_static='-dn'
-      lt_cv_prog_cc_shlib='-belf'
-      ;;
-
-    solaris*)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Wl,'
-      ;;
-
-    sunos4*)
-      lt_cv_prog_cc_pic='-PIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Qoption ld '
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      if test "x$host_vendor" = xsni; then
-	lt_cv_prog_cc_wl='-LD'
-      else
-	lt_cv_prog_cc_wl='-Wl,'
-      fi
-      ;;
-
-    uts4*)
-      lt_cv_prog_cc_pic='-pic'
-      lt_cv_prog_cc_static='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_cv_prog_cc_pic='-Kconform_pic'
-	lt_cv_prog_cc_static='-Bstatic'
-      fi
-      ;;
-
-    *)
-      lt_cv_prog_cc_can_build_shared=no
-      ;;
-    esac
-  fi
-])
-if test -z "$lt_cv_prog_cc_pic"; then
-  AC_MSG_RESULT([none])
-else
-  AC_MSG_RESULT([$lt_cv_prog_cc_pic])
-
-  # Check to make sure the pic_flag actually works.
-  AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works])
-  AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl
-    save_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
-    AC_TRY_COMPILE([], [], [dnl
-      case $host_os in
-      hpux9* | hpux10* | hpux11*)
-	# On HP-UX, both CC and GCC only warn that PIC is supported... then
-	# they create non-PIC objects.  So, if there were any warnings, we
-	# assume that PIC is not supported.
-	if test -s conftest.err; then
-	  lt_cv_prog_cc_pic_works=no
-	else
-	  lt_cv_prog_cc_pic_works=yes
-	fi
-	;;
-      *)
-	lt_cv_prog_cc_pic_works=yes
-	;;
-      esac
-    ], [dnl
-      lt_cv_prog_cc_pic_works=no
-    ])
-    CFLAGS="$save_CFLAGS"
-  ])
 
-  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
-    lt_cv_prog_cc_pic=
-    lt_cv_prog_cc_can_build_shared=no
-  else
-    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
-  fi
-
-  AC_MSG_RESULT([$lt_cv_prog_cc_pic_works])
-fi
-
-# Check for any special shared library compilation flags.
-if test -n "$lt_cv_prog_cc_shlib"; then
-  AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[[ 	]]$lt_cv_prog_cc_shlib[[ 	]]" >/dev/null; then :
-  else
-   AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
-    lt_cv_prog_cc_can_build_shared=no
-  fi
-fi
-
-AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works])
-AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl
-  lt_cv_prog_cc_static_works=no
-  save_LDFLAGS="$LDFLAGS"
-  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
-  AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes])
-  LDFLAGS="$save_LDFLAGS"
+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
+# ---------------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler
+AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s out/conftest.err; then
+       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w .
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
 ])
+])# AC_LIBTOOL_PROG_CC_C_O
 
-# Belt *and* braces to stop my trousers falling down:
-test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
-AC_MSG_RESULT([$lt_cv_prog_cc_static_works])
-
-pic_flag="$lt_cv_prog_cc_pic"
-special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
-wl="$lt_cv_prog_cc_wl"
-link_static_flag="$lt_cv_prog_cc_static"
-no_builtin_flag="$lt_cv_prog_cc_no_builtin"
-can_build_shared="$lt_cv_prog_cc_can_build_shared"
-
-
-# Check to see if options -o and -c are simultaneously supported by compiler
-AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext])
-AC_CACHE_VAL([lt_cv_compiler_c_o], [
-$rm -r conftest 2>/dev/null
-mkdir conftest
-cd conftest
-echo "int some_variable = 0;" > conftest.$ac_ext
-mkdir out
-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-# that will create temporary files in the current directory regardless of
-# the output directory.  Thus, making CWD read-only will cause this test
-# to fail, enabling locking or at least warning the user not to do parallel
-# builds.
-chmod -w .
-save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
-compiler_c_o=no
-if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
-  # The compiler can only warn and ignore the option if not recognized
-  # So say no if there are warnings
-  if test -s out/conftest.err; then
-    lt_cv_compiler_c_o=no
-  else
-    lt_cv_compiler_c_o=yes
-  fi
-else
-  # Append any errors to the config.log.
-  cat out/conftest.err 1>&AC_FD_CC
-  lt_cv_compiler_c_o=no
-fi
-CFLAGS="$save_CFLAGS"
-chmod u+w .
-$rm conftest* out/*
-rmdir out
-cd ..
-rmdir conftest
-$rm -r conftest 2>/dev/null
-])
-compiler_c_o=$lt_cv_compiler_c_o
-AC_MSG_RESULT([$compiler_c_o])
-
-if test x"$compiler_c_o" = x"yes"; then
-  # Check to see if we can write to a .lo
-  AC_MSG_CHECKING([if $compiler supports -c -o file.lo])
-  AC_CACHE_VAL([lt_cv_compiler_o_lo], [
-  lt_cv_compiler_o_lo=no
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -c -o conftest.lo"
-  save_objext="$ac_objext"
-  ac_objext=lo
-  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
-    # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-    if test -s conftest.err; then
-      lt_cv_compiler_o_lo=no
-    else
-      lt_cv_compiler_o_lo=yes
-    fi
-  ])
-  ac_objext="$save_objext"
-  CFLAGS="$save_CFLAGS"
-  ])
-  compiler_o_lo=$lt_cv_compiler_o_lo
-  AC_MSG_RESULT([$compiler_o_lo])
-else
-  compiler_o_lo=no
-fi
 
+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
+# -----------------------------------------
 # Check to see if we can do hard links to lock some files if needed
+AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
+[AC_REQUIRE([_LT_AC_LOCK])dnl
+
 hard_links="nottested"
-if test "$compiler_c_o" = no && test "$need_locks" != no; then
+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
   AC_MSG_CHECKING([if we can lock with hard links])
   hard_links=yes
@@ -1976,749 +1860,77 @@ if test "$compiler_c_o" = no && test "$need_locks" != no; then
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   AC_MSG_RESULT([$hard_links])
   if test "$hard_links" = no; then
-    AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe])
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
     need_locks=warn
   fi
 else
   need_locks=no
 fi
+])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
 
-if test "$GCC" = yes; then
-  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
-  AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions])
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
-  compiler_rtti_exceptions=no
-  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
-    # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-    if test -s conftest.err; then
-      compiler_rtti_exceptions=no
-    else
-      compiler_rtti_exceptions=yes
-    fi
-  ])
-  CFLAGS="$save_CFLAGS"
-  AC_MSG_RESULT([$compiler_rtti_exceptions])
-
-  if test "$compiler_rtti_exceptions" = "yes"; then
-    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
-  else
-    no_builtin_flag=' -fno-builtin'
-  fi
-fi
-
-# See if the linker supports building shared libraries.
-AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries])
-
-allow_undefined_flag=
-no_undefined_flag=
-need_lib_prefix=unknown
-need_version=unknown
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-archive_cmds=
-archive_expsym_cmds=
-old_archive_from_new_cmds=
-old_archive_from_expsyms_cmds=
-export_dynamic_flag_spec=
-whole_archive_flag_spec=
-thread_safe_flag_spec=
-hardcode_into_libs=no
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-link_all_deplibs=unknown
-always_export_symbols=no
-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-# include_expsyms should be a list of space-separated symbols to be *always*
-# included in the symbol list
-include_expsyms=
-# exclude_expsyms can be an egrep regular expression of symbols to exclude
-# it will be wrapped by ` (' and `)$', so one must not match beginning or
-# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that contains `d'.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-# platforms (ab)use it in PIC code, but their linkers get confused if
-# the symbol is explicitly referenced.  Since portable code cannot
-# rely on this symbol name, it's probably fine to never include it in
-# preloaded symbol tables.
-extract_expsyms_cmds=
-
-case $host_os in
-cygwin* | mingw* | pw32*)
-  # FIXME: the MSVC++ port hasn't been tested in a loooong time
-  # When not using gcc, we currently assume that we are using
-  # Microsoft Visual C++.
-  if test "$GCC" != yes; then
-    with_gnu_ld=no
-  fi
-  ;;
-openbsd*)
-  with_gnu_ld=no
-  ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  # If archive_cmds runs LD, not CC, wlarc should be empty
-  wlarc='${wl}'
-
-  # See if GNU ld supports shared libraries.
-  case $host_os in
-  aix3* | aix4* | aix5*)
-    # On AIX, the GNU linker is very broken
-    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
-    ld_shlibs=no
-    cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-
-    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-    # that the semantics of dynamic libraries on AmigaOS, at least up
-    # to version 4, is to share data among multiple programs linked
-    # with the same dynamic library.  Since this doesn't match the
-    # behavior of shared libraries on other platforms, we can use
-    # them.
-    ld_shlibs=no
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec='-L$libdir'
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-
-    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
-      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
-      else $CC -o impgen impgen.c ; fi)~
-      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-    # cygwin and mingw dlls have different entry points and sets of symbols
-    # to exclude.
-    # FIXME: what about values for MSVC?
-    dll_entry=__cygwin_dll_entry@12
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-    case $host_os in
-    mingw*)
-      # mingw values
-      dll_entry=_DllMainCRTStartup@12
-      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-      ;;
-    esac
-
-    # mingw and cygwin differ, and it's simplest to just exclude the union
-    # of the two symbol sets.
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
-    # recent cygwin and mingw systems supply a stub DllMain which the user
-    # can override, but on older systems we have to supply one (in ltdll.c)
-    if test "x$lt_cv_need_dllmain" = "xyes"; then
-      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
-	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-    else
-      ltdll_obj=
-      ltdll_cmds=
-    fi
-
-    # Extract the symbol export list from an `--export-all' def file,
-    # then regenerate the def file from the symbol export list, so that
-    # the compiled dll only exports the symbol export list.
-    # Be careful not to strip the DATA tag left be newer dlltools.
-    export_symbols_cmds="$ltdll_cmds"'
-      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-      sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-    # If the export-symbols file already is a .def file (1st line
-    # is EXPORTS), use it as is.
-    # If DATA tags from a recent dlltool are present, honour them!
-    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname-def;
-      else
-	echo EXPORTS > $output_objdir/$soname-def;
-	_lt_hint=1;
-	cat $export_symbols | while read symbol; do
-	 set dummy \$symbol;
-	 case \[$]# in
-	   2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	   *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
-	 esac;
-	 _lt_hint=`expr 1 + \$_lt_hint`;
-	done;
-      fi~
-      '"$ltdll_cmds"'
-      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-      wlarc=
-    else
-      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    fi
-    ;;
 
-  solaris* | sysv5*)
-    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-      ld_shlibs=no
-      cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  sunos4*)
-    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    wlarc=
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-  esac
-
-  if test "$ld_shlibs" = yes; then
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    case $host_os in
-    cygwin* | mingw* | pw32*)
-      # dlltool doesn't understand --whole-archive et. al.
-      whole_archive_flag_spec=
-      ;;
-    *)
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-	whole_archive_flag_spec=
-      fi
-      ;;
-    esac
-  fi
+# AC_LIBTOOL_OBJDIR
+# -----------------
+AC_DEFUN([AC_LIBTOOL_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
 else
-  # PORTME fill in a description of your system's linker (not GNU ld)
-  case $host_os in
-  aix3*)
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-    # Note: this linker hardcodes the directories in LIBPATH if there
-    # are no directories specified by -L.
-    hardcode_minus_L=yes
-    if test "$GCC" = yes && test -z "$link_static_flag"; then
-      # Neither direct hardcoding nor static linking is supported with a
-      # broken collect2.
-      hardcode_direct=unsupported
-    fi
-    ;;
-
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-	for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-	    aix_use_runtimelinking=yes
-	    break
-	  fi
-	done
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    hardcode_direct=yes
-    archive_cmds=''
-    hardcode_libdir_separator=':'
-    if test "$GCC" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	  strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  hardcode_direct=yes
-	else
-	  # We have old collect2
-	  hardcode_direct=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L=yes
-	  hardcode_libdir_flag_spec='-L$libdir'
-	  hardcode_libdir_separator=
-	fi
-      esac
-
-      shared_flag='-shared'
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	shared_flag='${wl}-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
-
-    # It seems that -bexpall can do strange things, so it is better to
-    # generate a list of symbols to export.
-    always_export_symbols=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag='-berok'
-      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-    else
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag="-z nodefs"
-	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-      else
-	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag='${wl}-berok'
-	# This is a bit strange, but is similar to how AIX traditionally builds
-	# it's shared libraries.
-	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
-      fi
-    fi
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    # see comment about different semantics on the GNU ld section
-    ld_shlibs=no
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec=' '
-    allow_undefined_flag=unsupported
-    # Tell ltmain to make .lib files, not .a files.
-    libext=lib
-    # FIXME: Setting linknames here is a bad hack.
-    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-    # The linker will automatically build a .lib file if we build a DLL.
-    old_archive_from_new_cmds='true'
-    # FIXME: Should let the user specify the lib program.
-    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
-    fix_srcfile_path='`cygpath -w "$srcfile"`'
-    ;;
-
-  darwin* | rhapsody*)
-    case "$host_os" in
-    rhapsody* | darwin1.[[012]])
-      allow_undefined_flag='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      allow_undefined_flag='-flat_namespace -undefined suppress'
-      ;;
-    esac
-    # FIXME: Relying on posixy $() will cause problems for
-    #        cross-compilation, but unfortunately the echo tests do not
-    #        yet detect zsh echo's removal of \ escapes.
-    archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
-    # We need to add '_' to the symbols in $export_symbols first
-    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    whole_archive_flag_spec='-all_load $convenience'
-    ;;
-
-  freebsd1*)
-    ld_shlibs=no
-    ;;
-
-  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-  # support.  Future versions do this automatically, but an explicit c++rt0.o
-  # does not break anything, and helps significantly (at the cost of a little
-  # extra space).
-  freebsd2.2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-  freebsd2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-  freebsd*)
-    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  hpux9* | hpux10* | hpux11*)
-    case $host_os in
-    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
-    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
-    esac
-    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_direct=yes
-    hardcode_minus_L=yes # Not in the search PATH, but as the default
-			 # location of the library.
-    export_dynamic_flag_spec='${wl}-E'
-    ;;
-
-  irix5* | irix6*)
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-    else
-      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    link_all_deplibs=yes
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-    else
-      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-    fi
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  newsos6)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_shlibpath_var=no
-    ;;
-
-  openbsd*)
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
-    else
-      case "$host_os" in
-      openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_libdir_flag_spec='-R$libdir'
-        ;;
-      *)
-        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-        ;;
-      esac
-    fi
-    ;;
-
-  os2*)
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    allow_undefined_flag=unsupported
-    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-    ;;
-
-  osf3*)
-    if test "$GCC" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    ;;
-
-  osf4* | osf5*)	# as osf3* with the addition of -msym flag
-    if test "$GCC" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
-      #Both c and cxx compiler support -rpath directly
-      hardcode_libdir_flag_spec='-rpath $libdir'
-    fi
-    hardcode_libdir_separator=:
-    ;;
-
-  sco3.2v5*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    runpath_var=LD_RUN_PATH
-    hardcode_runpath_var=yes
-    export_dynamic_flag_spec='${wl}-Bexport'
-    ;;
-
-  solaris*)
-    # gcc --version < 3.0 without binutils cannot create self contained
-    # shared libraries reliably, requiring libgcc.a to resolve some of
-    # the object symbols generated in some cases.  Libraries that use
-    # assert need libgcc.a to resolve __eprintf, for example.  Linking
-    # a copy of libgcc.a into every shared library to guarantee resolving
-    # such symbols causes other problems:  According to Tim Van Holder
-    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
-    # (to the application) exception stack for one thing.
-    no_undefined_flag=' -z defs'
-    if test "$GCC" = yes; then
-      case `$CC --version 2>/dev/null` in
-      [[12]].*)
-	cat <<EOF 1>&2
-
-*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
-*** create self contained shared libraries on Solaris systems, without
-*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
-*** -no-undefined support, which will at least allow you to build shared
-*** libraries.  However, you may find that when you link such libraries
-*** into an application without using GCC, you have to manually add
-*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
-*** upgrade to a newer version of GCC.  Another option is to rebuild your
-*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
-
-EOF
-        no_undefined_flag=
-	;;
-      esac
-    fi
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_shlibpath_var=no
-    case $host_os in
-    solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
-    esac
-    link_all_deplibs=yes
-    ;;
-
-  sunos4*)
-    if test "x$host_vendor" = xsequent; then
-      # Use $CC to link under sequent, because it throws in some extra .o
-      # files that make .init and .fini sections work.
-      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-    else
-      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-    fi
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4)
-    if test "x$host_vendor" = xsno; then
-      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes # is this really true???
-    else
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-    fi
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4.3*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    export_dynamic_flag_spec='-Bexport'
-    ;;
-
-  sysv5*)
-    no_undefined_flag=' -z text'
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec=
-    hardcode_shlibpath_var=no
-    runpath_var='LD_RUN_PATH'
-    ;;
-
-  uts4*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  dgux*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4*MP*)
-    if test -d /usr/nec; then
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ld_shlibs=yes
-    fi
-    ;;
-
-  sysv4.2uw2*)
-    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=no
-    hardcode_shlibpath_var=no
-    hardcode_runpath_var=yes
-    runpath_var=LD_RUN_PATH
-    ;;
-
-  sysv5uw7* | unixware7*)
-    no_undefined_flag='${wl}-z ${wl}text'
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-    else
-      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-    fi
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    ld_shlibs=no
-    ;;
-  esac
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
 fi
-AC_MSG_RESULT([$ld_shlibs])
-test "$ld_shlibs" = no && can_build_shared=no
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+])# AC_LIBTOOL_OBJDIR
+
 
+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
+# ----------------------------------------------
 # Check hardcoding attributes.
-AC_MSG_CHECKING([how to hardcode library paths into programs])
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var"; then
+AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_AC_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
+   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
+   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no &&
+  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$hardcode_shlibpath_var" != no &&
-     test "$hardcode_minus_L" != no; then
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
     # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
+    _LT_AC_TAGVAR(hardcode_action, $1)=relink
   else
     # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
+    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
   fi
 else
   # We cannot hardcode anything, or else we can only hardcode existing
   # directories.
-  hardcode_action=unsupported
+  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
 fi
-AC_MSG_RESULT([$hardcode_action])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
 
-striplib=
+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+
+
+# AC_LIBTOOL_SYS_LIB_STRIP
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
+[striplib=
 old_striplib=
 AC_MSG_CHECKING([whether stripping libraries is possible])
 if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
@@ -2726,17 +1938,33 @@ if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
   AC_MSG_RESULT([yes])
 else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         AC_MSG_RESULT([yes])
+       else
   AC_MSG_RESULT([no])
 fi
+       ;;
+   *)
+  AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+])# AC_LIBTOOL_SYS_LIB_STRIP
 
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# -----------------------------
 # PORTME Fill in your ld.so characteristics
-AC_MSG_CHECKING([dynamic linker characteristics])
+AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
+[AC_MSG_CHECKING([dynamic linker characteristics])
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
+shrext_cmds=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -2746,23 +1974,45 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
 
 case $host_os in
 aix3*)
   version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
-  # AIX has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
 aix4* | aix5*)
   version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
   if test "$host_cpu" = ia64; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
@@ -2772,29 +2022,28 @@ aix4* | aix5*)
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.[[01]] | aix4.[[01]].*)
-	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	     echo ' yes '
-	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	  :
-	else
-	  can_build_shared=no
-	fi
-	;;
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can
-    # not hardcode correct soname into executable. Probably we can
-    # add versioning support to collect2, so additional links can
-    # be useful in future.
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
     if test "$aix_use_runtimelinking" = yes; then
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     else
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
       library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
+      soname_spec='${libname}${release}${shared_ext}$major'
     fi
     shlibpath_var=LIBPATH
   fi
@@ -2803,25 +2052,24 @@ aix4* | aix5*)
 amigaos*)
   library_names_spec='$libname.ixlibrary $libname.a'
   # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
   ;;
 
 beos*)
-  library_names_spec='${libname}.so'
+  library_names_spec='${libname}${shared_ext}'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[[45]]*)
   version_type=linux
   need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
   sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  export_dynamic_flag_spec=-rdynamic
   # the default ld.so.conf also contains /usr/contrib/lib and
   # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
   # libtool to hard-code these into programs
@@ -2829,29 +2077,55 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
+  shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
+
   case $GCC,$host_os in
-  yes,cygwin*)
+  yes,cygwin* | yes,mingw* | yes,pw32*)
     library_names_spec='$libname.dll.a'
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
     ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    ;;
+
   *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
   esac
   dynamic_linker='Win32 ld.exe'
@@ -2864,30 +2138,58 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
   ;;
 
 freebsd1*)
   dynamic_linker=no
   ;;
 
-freebsd*)
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
   objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
   esac
@@ -2896,7 +2198,11 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  *)
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  *) # from 3.2 on
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
@@ -2907,8 +2213,8 @@ gnu*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   hardcode_into_libs=yes
   ;;
@@ -2916,33 +2222,75 @@ gnu*)
 hpux9* | hpux10* | hpux11*)
   # Give a soname corresponding to the major version so that dld.sl refuses to
   # link against other versions.
-  dynamic_linker="$host_os dld.sl"
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  shlibpath_var=SHLIB_PATH
-  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-  soname_spec='${libname}${release}.sl$major'
+  case "$host_cpu" in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555.
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-irix5* | irix6*)
-  version_type=irix
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
   case $host_os in
-  irix5*)
+  irix5* | nonstopux*)
     libsuff= shlibsuff=
     ;;
   *)
     case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
     *) libsuff= shlibsuff= libmagic=never-match;;
     esac
     ;;
@@ -2951,20 +2299,21 @@ irix5* | irix6*)
   shlibpath_overrides_runpath=no
   sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
   sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
   ;;
 
 # No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+linux*oldld* | linux*aout* | linux*coff*)
   dynamic_linker=no
   ;;
 
 # This must be Linux ELF.
-linux-gnu*)
+linux*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -2973,6 +2322,12 @@ linux-gnu*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
   # We used to test for /lib/ld.so.1 and disable shared libraries on
   # powerpc, because MkLinux only supported shared libraries with the
   # GNU dynamic linker.  Since this was broken with cross compilers,
@@ -2982,17 +2337,29 @@ linux-gnu*)
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -3002,7 +2369,17 @@ netbsd*)
 
 newsos6)
   version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -3011,36 +2388,38 @@ openbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
   if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case "$host_os" in
-    openbsd2.[[89]] | openbsd2.[[89]].*)
-      shlibpath_overrides_runpath=no
-      ;;
-    *)
-      shlibpath_overrides_runpath=yes
-      ;;
-    esac
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
   else
     shlibpath_overrides_runpath=yes
   fi
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
   ;;
 
 os2*)
   libname_spec='$name'
+  shrext_cmds=".dll"
   need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
+  library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
   shlibpath_var=LIBPATH
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
+  need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
@@ -3048,8 +2427,8 @@ osf3* | osf4* | osf5*)
 
 sco3.2v5*)
   version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -3057,8 +2436,8 @@ solaris*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -3068,7 +2447,7 @@ solaris*)
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
@@ -3080,12 +2459,18 @@ sunos4*)
 
 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
       shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
       ;;
     motorola)
       need_lib_prefix=no
@@ -3096,39 +2481,944 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   esac
   ;;
 
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
 sysv4*MP*)
   if test -d /usr/nec ;then
     version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
 *)
   dynamic_linker=no
   ;;
 esac
 AC_MSG_RESULT([$dynamic_linker])
 test "$dynamic_linker" = no && can_build_shared=no
+])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+
+
+# _LT_AC_TAGCONFIG
+# ----------------
+AC_DEFUN([_LT_AC_TAGCONFIG],
+[AC_ARG_WITH([tags],
+    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
+        [include additional configurations @<:@automatic@:>@])],
+    [tagnames="$withval"])
+
+if test -f "$ltmain" && test -n "$tagnames"; then
+  if test ! -f "${ofile}"; then
+    AC_MSG_WARN([output file `$ofile' does not exist])
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
+    else
+      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
+    fi
+  fi
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+  for tagname in $tagnames; do
+    IFS="$lt_save_ifs"
+    # Check whether tagname contains only valid characters
+    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
+    "") ;;
+    *)  AC_MSG_ERROR([invalid tag name: $tagname])
+	;;
+    esac
+
+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+    then
+      AC_MSG_ERROR([tag name \"$tagname\" already exists])
+    fi
+
+    # Update the list of available tags.
+    if test -n "$tagname"; then
+      echo appending configuration tag \"$tagname\" to $ofile
+
+      case $tagname in
+      CXX)
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
+	  AC_LIBTOOL_LANG_CXX_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      F77)
+	if test -n "$F77" && test "X$F77" != "Xno"; then
+	  AC_LIBTOOL_LANG_F77_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      GCJ)
+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+	  AC_LIBTOOL_LANG_GCJ_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      RC)
+	AC_LIBTOOL_LANG_RC_CONFIG
+	;;
+
+      *)
+	AC_MSG_ERROR([Unsupported tag name: $tagname])
+	;;
+      esac
+
+      # Append the new tag name to the list of available tags.
+      if test -n "$tagname" ; then
+      available_tags="$available_tags $tagname"
+    fi
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  # Now substitute the updated list of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+    mv "${ofile}T" "$ofile"
+    chmod +x "$ofile"
+  else
+    rm -f "${ofile}T"
+    AC_MSG_ERROR([unable to update list of available tagged configurations.])
+  fi
+fi
+])# _LT_AC_TAGCONFIG
+
+
+# AC_LIBTOOL_DLOPEN
+# -----------------
+# enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN],
+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_DLOPEN
+
+
+# AC_LIBTOOL_WIN32_DLL
+# --------------------
+# declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_WIN32_DLL
+
+
+# AC_ENABLE_SHARED([DEFAULT])
+# ---------------------------
+# implement the --enable-shared flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([shared],
+    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
+])# AC_ENABLE_SHARED
+
+
+# AC_DISABLE_SHARED
+# -----------------
+#- set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)
+])# AC_DISABLE_SHARED
+
+
+# AC_ENABLE_STATIC([DEFAULT])
+# ---------------------------
+# implement the --enable-static flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([static],
+    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
+])# AC_ENABLE_STATIC
+
+
+# AC_DISABLE_STATIC
+# -----------------
+# set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)
+])# AC_DISABLE_STATIC
+
+
+# AC_ENABLE_FAST_INSTALL([DEFAULT])
+# ---------------------------------
+# implement the --enable-fast-install flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([fast-install],
+    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
+])# AC_ENABLE_FAST_INSTALL
+
+
+# AC_DISABLE_FAST_INSTALL
+# -----------------------
+# set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)
+])# AC_DISABLE_FAST_INSTALL
+
+
+# AC_LIBTOOL_PICMODE([MODE])
+# --------------------------
+# implement the --with-pic flag
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)
+])# AC_LIBTOOL_PICMODE
+
+
+# AC_PROG_EGREP
+# -------------
+# This is predefined starting with Autoconf 2.54, so this conditional
+# definition can be removed once we require Autoconf 2.54 or later.
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
+[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
+   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi])
+ EGREP=$ac_cv_prog_egrep
+ AC_SUBST([EGREP])
+])])
+
+
+# AC_PATH_TOOL_PREFIX
+# -------------------
+# find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+])# AC_PATH_TOOL_PREFIX
+
+
+# AC_PATH_MAGIC
+# -------------
+# find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# AC_PATH_MAGIC
+
+
+# AC_PROG_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+    [AC_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])# AC_PROG_LD
+
+
+# AC_PROG_LD_GNU
+# --------------
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# AC_PROG_LD_GNU
+
+
+# AC_PROG_LD_RELOAD_FLAG
+# ----------------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$CC -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+])# AC_PROG_LD_RELOAD_FLAG
+
+
+# AC_DEPLIBS_CHECK_METHOD
+# -----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | kfreebsd*-gnu | dragonfly*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case "$host_cpu" in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+nto-qnx*)
+  lt_cv_deplibs_check_method=unknown
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+])# AC_DEPLIBS_CHECK_METHOD
+
+
+# AC_PROG_NM
+# ----------
+# find the pathname to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
+    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      # Tru64's nm complains that /dev/null is an invalid object file
+      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+      */dev/null* | *'Invalid file or object type'*)
+	lt_cv_path_NM="$tmp_nm -B"
+	break
+        ;;
+      *)
+	case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	*/dev/null*)
+	  lt_cv_path_NM="$tmp_nm -p"
+	  break
+	  ;;
+	*)
+	  lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	  continue # so that we can try to find one that supports BSD flags
+	  ;;
+	esac
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+])# AC_PROG_NM
+
 
-# Report the final consequences.
+# AC_CHECK_LIBM
+# -------------
+# check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  ;;
+esac
+])# AC_CHECK_LIBM
+
+
+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments.  Note that LIBLTDL
+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
+# DIRECTORY is not provided, it is assumed to be `libltdl'.  LIBLTDL will
+# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_CONVENIENCE
+
+
+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl installable library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments.  Note that LIBLTDL
+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
+# DIRECTORY is not provided and an installed libltdl is not found, it is
+# assumed to be `libltdl'.  LIBLTDL will be prefixed with '${top_builddir}/'
+# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
+# quotes!).  If your package is not flat and you're not using automake,
+# define top_builddir and top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, lt_dlinit,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    LTDLINCL=
+  fi
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_INSTALLABLE
+
+
+# AC_LIBTOOL_CXX
+# --------------
+# enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX],
+[AC_REQUIRE([_LT_AC_LANG_CXX])
+])# AC_LIBTOOL_CXX
+
+
+# _LT_AC_LANG_CXX
+# ---------------
+AC_DEFUN([_LT_AC_LANG_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
+])# _LT_AC_LANG_CXX
+
+# _LT_AC_PROG_CXXCPP
+# ---------------
+AC_DEFUN([_LT_AC_PROG_CXXCPP],
+[
+AC_REQUIRE([AC_PROG_CXX])
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+fi
+])# _LT_AC_PROG_CXXCPP
+
+# AC_LIBTOOL_F77
+# --------------
+# enable support for Fortran 77 libraries
+AC_DEFUN([AC_LIBTOOL_F77],
+[AC_REQUIRE([_LT_AC_LANG_F77])
+])# AC_LIBTOOL_F77
+
+
+# _LT_AC_LANG_F77
+# ---------------
+AC_DEFUN([_LT_AC_LANG_F77],
+[AC_REQUIRE([AC_PROG_F77])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
+])# _LT_AC_LANG_F77
+
+
+# AC_LIBTOOL_GCJ
+# --------------
+# enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],
+[AC_REQUIRE([_LT_AC_LANG_GCJ])
+])# AC_LIBTOOL_GCJ
+
+
+# _LT_AC_LANG_GCJ
+# ---------------
+AC_DEFUN([_LT_AC_LANG_GCJ],
+[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
+])# _LT_AC_LANG_GCJ
+
+
+# AC_LIBTOOL_RC
+# --------------
+# enable support for Windows resource files
+AC_DEFUN([AC_LIBTOOL_RC],
+[AC_REQUIRE([LT_AC_PROG_RC])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
+])# AC_LIBTOOL_RC
+
+
+# AC_LIBTOOL_LANG_C_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
+AC_DEFUN([_LT_AC_LANG_C_CONFIG],
+[lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}\n'
+
+_LT_AC_SYS_COMPILER
+
+#
+# Check for any special shared library compilation flags.
+#
+_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
+if test "$GCC" = no; then
+  case $host_os in
+  sco3.2v5*)
+    _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
+    ;;
+  esac
+fi
+if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
+  AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
+  if echo "$old_CC $old_CFLAGS " | grep "[[ 	]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ 	]]" >/dev/null; then :
+  else
+    AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
+    _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
+  fi
+fi
+
+
+#
+# Check to make sure the static flag actually works.
+#
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
+  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+  $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
+  [],
+  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+
+
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+
+# Report which librarie types wil actually be built
 AC_MSG_CHECKING([if libtool supports shared libraries])
 AC_MSG_RESULT([$can_build_shared])
 
@@ -3146,11 +3436,11 @@ aix3*)
   fi
   ;;
 
-aix4*)
+aix4* | aix5*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
-  ;;
+    ;;
 esac
 AC_MSG_RESULT([$enable_shared])
 
@@ -3159,111 +3449,1361 @@ AC_MSG_CHECKING([whether to build static libraries])
 test "$enable_shared" = yes || enable_static=yes
 AC_MSG_RESULT([$enable_static])
 
-if test "$hardcode_action" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
+AC_LIBTOOL_CONFIG($1)
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_C_CONFIG
+
+
+# AC_LIBTOOL_LANG_CXX_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
+AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
+[AC_LANG_PUSH(C++)
+AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Dependencies to place before and after the object being linked:
+_LT_AC_TAGVAR(predep_objects, $1)=
+_LT_AC_TAGVAR(postdep_objects, $1)=
+_LT_AC_TAGVAR(predeps, $1)=
+_LT_AC_TAGVAR(postdeps, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+
+# Source file extension for C++ test sources.
+ac_ext=cc
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+  unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+  lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+  unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+else
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 fi
 
-AC_LIBTOOL_DLOPEN_SELF
+if test "$GXX" = yes; then
+  # Set up default GNU C++ configuration
+
+  AC_PROG_LD
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if test "$with_gnu_ld" = yes; then
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
 
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $archive_cmds in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+	grep 'no-whole-archive' > /dev/null; then
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+  fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+else
+  GXX=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+# PORTME: fill in a description of your system's C++ link characteristics
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+case $host_os in
+  aix3*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
     ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-    AC_CACHE_VAL([lt_cv_archive_cmds_need_lc],
-    [$rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
-
-    if AC_TRY_EVAL(ac_compile); then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$lt_cv_prog_cc_wl
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      save_allow_undefined_flag=$allow_undefined_flag
-      allow_undefined_flag=
-      if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-      then
-	lt_cv_archive_cmds_need_lc=no
+  aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	    ;;
+	  esac
+	done
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    _LT_AC_TAGVAR(archive_cmds, $1)=''
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+    if test "$GXX" = yes; then
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	else
+	  # We have old collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	fi
+      esac
+      shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	shared_flag='-G'
+      else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+      fi
+    fi
+
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
+    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+      # Determine the default libpath from the value encoded in an empty executable.
+      _LT_AC_SYS_LIBPATH_AIX
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+     else
+      if test "$host_cpu" = ia64; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
       else
-	lt_cv_archive_cmds_need_lc=yes
+	# Determine the default libpath from the value encoded in an empty executable.
+	_LT_AC_SYS_LIBPATH_AIX
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	# -bexpall does not export symbols beginning with underscore (_)
+	_LT_AC_TAGVAR(always_export_symbols, $1)=yes
+	# Exported symbols can be pulled into shared objects from archives
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	# This is similar to how AIX traditionally builds it's shared libraries.
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
       fi
-      allow_undefined_flag=$save_allow_undefined_flag
+    fi
+    ;;
+  chorus*)
+    case $cc_basename in
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+
+
+  cygwin* | mingw* | pw32*)
+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+    # as there is no search path for DLLs.
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+    _LT_AC_TAGVAR(always_export_symbols, $1)=no
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      # If the export-symbols file already is a .def file (1st line
+      # is EXPORTS), use it as is; otherwise, prepend...
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname.def;
+      else
+	echo EXPORTS > $output_objdir/$soname.def;
+	cat $export_symbols >> $output_objdir/$soname.def;
+      fi~
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
     else
-      cat conftest.err 1>&5
-    fi])
-    AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc])
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+  ;;
+      darwin* | rhapsody*)
+        case "$host_os" in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+        esac
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
+      fi
+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      else
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+      fi
+        ;;
+
+  dgux*)
+    case $cc_basename in
+      ec++)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      ghcx)
+	# Green Hills C++ Compiler
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
     ;;
-  esac
-fi
-need_lc=${lt_cv_archive_cmds_need_lc-yes}
+  freebsd[[12]]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  freebsd-elf*)
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    ;;
+  freebsd* | kfreebsd*-gnu | dragonfly*)
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+    ;;
+  gnu*)
+    ;;
+  hpux9*)
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				# but as the default
+				# location of the library.
+
+    case $cc_basename in
+    CC)
+      # FIXME: insert proper C++ library support
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    aCC)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      #
+      # There doesn't appear to be a way to prevent this compiler from
+      # explicitly linking system object files so we need to strip them
+      # from the output so that they don't get included in the library
+      # dependencies.
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      ;;
+    *)
+      if test "$GXX" = yes; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+    ;;
+  hpux10*|hpux11*)
+    if test $with_gnu_ld = no; then
+      case "$host_cpu" in
+      hppa*64*)
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+        ;;
+      ia64*)
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+        ;;
+      *)
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        ;;
+      esac
+    fi
+    case "$host_cpu" in
+    hppa*64*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+    ia64*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+      ;;
+    *)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+      ;;
+    esac
 
-# The second clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  :
+    case $cc_basename in
+      CC)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      aCC)
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	esac
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test $with_gnu_ld = no; then
+	    case "$host_cpu" in
+	    ia64*|hppa*64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+	      ;;
+	    *)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    esac
+	  fi
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC)
+	# SGI C++
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+	# Archives containing C++ object files must be created using
+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test "$with_gnu_ld" = no; then
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	  else
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+	  fi
+	fi
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+	;;
+    esac
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    ;;
+  linux*)
+    case $cc_basename in
+      KCC)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	;;
+      icpc)
+	# Intel C++
+	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
+	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	;;
+      pgCC)
+        # Portland Group C++ compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+        ;;
+      cxx)
+	# Compaq C++
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	runpath_var=LD_RUN_PATH
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    fi
+    # Workaround some broken pre-1.5 toolchains
+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+    ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  openbsd*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    fi
+    output_verbose_link_cmd='echo'
+    ;;
+  osf3*)
+    case $cc_basename in
+      KCC)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+
+	;;
+      RCC)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      cxx)
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  osf4* | osf5*)
+    case $cc_basename in
+      KCC)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Archives containing C++ object files must be created using
+	# the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
+	;;
+      RCC)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      cxx)
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	  echo "-hidden">> $lib.exp~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
+	  $rm $lib.exp'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  sco*)
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    case $cc_basename in
+      CC)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC)
+	# Sun C++ 4.x
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      lcc)
+	# Lucid
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC)
+	# Sun C++ 4.2, 5.x and Centerline C++
+	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	case $host_os in
+	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	  *)
+	    # The C++ compiler is used as linker so we must use $wl
+	    # flag to pass the commands to the underlying system
+	    # linker.
+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
+	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    ;;
+	esac
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	# Archives containing C++ object files must be created using
+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	;;
+      gcx)
+	# Green Hills C++ Compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	# The C++ compiler must be used to create the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	;;
+      *)
+	# GNU C++ compiler with Solaris linker
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  else
+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	    # platform.
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  fi
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	fi
+	;;
+    esac
+    ;;
+  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC)
+	# NonStop-UX NCC 3.20
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+esac
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_AC_TAGVAR(GCC, $1)="$GXX"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_POSTDEP_PREDEP($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+])# AC_LIBTOOL_LANG_CXX_CONFIG
+
+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+# ------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
+int a;
+void foo (void) { a = 0; }
+EOF
+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+EOF
+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  # The `*' in the case matches for architectures that use `case' in
+  # $output_verbose_cmd can trigger glob expansion during the loop
+  # eval without this substitution.
+  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
+
+  for p in `eval $output_verbose_link_cmd`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+	  || test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
+	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
+	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
+	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
 else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
+  echo "libtool.m4: error: problem compiling $1 test program"
 fi
 
-if test -f "$ltmain"; then
-  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
-  $rm -f "${ofile}T"
+$rm -f confest.$objext
+
+case " $_LT_AC_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+])# AC_LIBTOOL_POSTDEP_PREDEP
+
+# AC_LIBTOOL_LANG_F77_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
+AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
+[AC_REQUIRE([AC_PROG_F77])
+AC_LANG_PUSH(Fortran 77)
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="      program t\n      end\n"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+aix4* | aix5*)
+  test "$enable_shared" = yes && enable_static=no
+  ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
 
-  echo creating $ofile
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
+_LT_AC_TAGVAR(GCC, $1)="$G77"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_F77_CONFIG
+
+
+# AC_LIBTOOL_LANG_GCJ_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
+AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_GCJ_CONFIG
+
+
+# AC_LIBTOOL_LANG_RC_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the Windows resource compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
+AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_RC_CONFIG
+
+
+# AC_LIBTOOL_CONFIG([TAGNAME])
+# ----------------------------
+# If TAGNAME is not passed, then create an initial libtool script
+# with a default configuration from the untagged config vars.  Otherwise
+# add code to config.status for appending the configuration named by
+# TAGNAME from the matching tagged config vars.
+AC_DEFUN([AC_LIBTOOL_CONFIG],
+[# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS \
-    AR AR_FLAGS CC LD LN_S NM SHELL \
-    reload_flag reload_cmds wl \
-    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
-    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
-    library_names_spec soname_spec \
-    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
-    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
-    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
-    old_striplib striplib file_magic_cmd export_symbols_cmds \
-    deplibs_check_method allow_undefined_flag no_undefined_flag \
-    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
-    global_symbol_to_c_name_address \
-    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
     sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+    old_postinstall_cmds old_postuninstall_cmds \
+    _LT_AC_TAGVAR(compiler, $1) \
+    _LT_AC_TAGVAR(CC, $1) \
+    _LT_AC_TAGVAR(LD, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
+    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
+    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
+    _LT_AC_TAGVAR(old_archive_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
+    _LT_AC_TAGVAR(predep_objects, $1) \
+    _LT_AC_TAGVAR(postdep_objects, $1) \
+    _LT_AC_TAGVAR(predeps, $1) \
+    _LT_AC_TAGVAR(postdeps, $1) \
+    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+    _LT_AC_TAGVAR(archive_cmds, $1) \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(postinstall_cmds, $1) \
+    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
+    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
+    _LT_AC_TAGVAR(no_undefined_flag, $1) \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
+    _LT_AC_TAGVAR(hardcode_automatic, $1) \
+    _LT_AC_TAGVAR(module_cmds, $1) \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+    _LT_AC_TAGVAR(exclude_expsyms, $1) \
+    _LT_AC_TAGVAR(include_expsyms, $1); do
 
     case $var in
-    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
-    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
+    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(module_cmds, $1) | \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
     postinstall_cmds | postuninstall_cmds | \
-    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
       # Double-quote double-evaled strings.
       eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
       ;;
@@ -3273,14 +4813,31 @@ if test -f "$ltmain"; then
     esac
   done
 
-  cat <<__EOF__ > "${ofile}T"
-#! $SHELL
+  case $lt_echo in
+  *'\[$]0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
+    ;;
+  esac
+
+ifelse([$1], [],
+  [cfgfile="${ofile}T"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  $rm -f "$cfgfile"
+  AC_MSG_NOTICE([creating $ofile])],
+  [cfgfile="$ofile"])
 
-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+  cat <<__EOF__ >> "$cfgfile"
+ifelse([$1], [],
+[#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
 # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
-# Copyright (C) 1996-2000 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
 # This program is free software; you can redistribute it and/or modify
@@ -3302,14 +4859,21 @@ if test -f "$ltmain"; then
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+# A sed program that does not truncate output.
+SED=$lt_SED
+
 # Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
+Xsed="$SED -e s/^X//"
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# The names of the tagged configurations supported by this script.
+available_tags=
 
-# ### BEGIN LIBTOOL CONFIG
+# ### BEGIN LIBTOOL CONFIG],
+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
 
 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 
@@ -3323,7 +4887,10 @@ build_libtool_libs=$enable_shared
 build_old_libs=$enable_static
 
 # Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$need_lc
+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
 
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
@@ -3331,6 +4898,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -3339,14 +4912,20 @@ echo=$lt_echo
 AR=$lt_AR
 AR_FLAGS=$lt_AR_FLAGS
 
-# The default C compiler.
-CC=$lt_CC
+# A C compiler.
+LTCC=$lt_LTCC
+
+# A language-specific compiler.
+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
 
 # Is the compiler the GNU C compiler?
-with_gcc=$GCC
+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+
+# An ERE matcher.
+EGREP=$lt_EGREP
 
 # The linker used to build libraries.
-LD=$lt_LD
+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
 
 # Whether we need hard or soft links.
 LN_S=$lt_LN_S
@@ -3355,7 +4934,7 @@ LN_S=$lt_LN_S
 NM=$lt_NM
 
 # A symbol stripping program
-STRIP=$STRIP
+STRIP=$lt_STRIP
 
 # Used to examine libraries when file_magic_cmd begins "file"
 MAGIC_CMD=$MAGIC_CMD
@@ -3377,7 +4956,7 @@ reload_flag=$lt_reload_flag
 reload_cmds=$lt_reload_cmds
 
 # How to pass a linker flag through the compiler.
-wl=$lt_wl
+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
 
 # Object file suffix (normally "o").
 objext="$ac_objext"
@@ -3385,18 +4964,21 @@ objext="$ac_objext"
 # Old archive suffix (normally "a").
 libext="$libext"
 
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
 # Executable file suffix (normally "").
 exeext="$exeext"
 
 # Additional compiler flags for building library objects.
-pic_flag=$lt_pic_flag
+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
 pic_mode=$pic_mode
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_compiler_c_o
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
 
-# Can we write directly to a .lo ?
-compiler_o_lo=$lt_compiler_o_lo
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
 
 # Must we lock files when doing compilation ?
 need_locks=$lt_need_locks
@@ -3417,19 +4999,19 @@ dlopen_self=$enable_dlopen_self
 dlopen_self_static=$enable_dlopen_self_static
 
 # Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_link_static_flag
+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
 
 # Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_no_builtin_flag
+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
 
 # Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
 
 # Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
 
 # Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
 
 # Library versioning type.
 version_type=$version_type
@@ -3446,26 +5028,50 @@ soname_spec=$lt_soname_spec
 
 # Commands used to build and install an old-style archive.
 RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
 old_postinstall_cmds=$lt_old_postinstall_cmds
 old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
 # Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
 
 # Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
 
 # Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
 postinstall_cmds=$lt_postinstall_cmds
 postuninstall_cmds=$lt_postuninstall_cmds
 
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+
 # Commands to strip libraries.
 old_striplib=$lt_old_striplib
 striplib=$lt_striplib
 
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
 
@@ -3473,10 +5079,10 @@ deplibs_check_method=$lt_deplibs_check_method
 file_magic_cmd=$lt_file_magic_cmd
 
 # Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
 
 # Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
 
 # Commands used to finish a libtool library installation in a directory.
 finish_cmds=$lt_finish_cmds
@@ -3485,13 +5091,13 @@ finish_cmds=$lt_finish_cmds
 finish_eval=$lt_finish_eval
 
 # Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_global_symbol_pipe
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
 # Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
 # Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
 # This is the shared library runtime path variable.
 runpath_var=$runpath_var
@@ -3503,36 +5109,45 @@ shlibpath_var=$shlibpath_var
 shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
 # How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
 
 # Whether we should hardcode library paths into libraries.
 hardcode_into_libs=$hardcode_into_libs
 
 # Flag to hardcode \$libdir into a binary during linking.
 # This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
 
 # Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
 
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
 # resulting binary.
-hardcode_direct=$hardcode_direct
+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
 
 # Set to yes if using the -LDIR flag during linking hardcodes DIR into the
 # resulting binary.
-hardcode_minus_L=$hardcode_minus_L
+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
 
 # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
 # the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
 
 # Variables whose values should be saved in libtool wrapper scripts and
 # restored at relink time.
 variables_saved_for_relink="$variables_saved_for_relink"
 
 # Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
 
 # Compile-time system search path for libraries
 sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
@@ -3541,30 +5156,33 @@ sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
+fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
 
 # Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
 
 # The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
 
 # The commands to extract the exported symbol list from a shared archive.
 extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
 # Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
 
 # Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
 
-# ### END LIBTOOL CONFIG
+ifelse([$1],[],
+[# ### END LIBTOOL CONFIG],
+[# ### END LIBTOOL TAG CONFIG: $tagname])
 
 __EOF__
 
+ifelse([$1],[], [
   case $host_os in
   aix3*)
-    cat <<\EOF >> "${ofile}T"
+    cat <<\EOF >> "$cfgfile"
 
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
@@ -3577,779 +5195,1629 @@ EOF
     ;;
   esac
 
-  case $host_os in
-  cygwin* | mingw* | pw32* | os2*)
-    cat <<'EOF' >> "${ofile}T"
-      # This is a source program that is used to create dlls on Windows
-      # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-	# This is a source program that is used to create import libraries
-	# on Windows for dlls which lack them. Don't remove nor modify the
-	# starting and closing comments
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
-#
-#  This file is part of GNU libtool.
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-#
-# #include <stdio.h>		/* for printf() */
-# #include <unistd.h>		/* for open(), lseek(), read() */
-# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-# #include <string.h>		/* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-#      int fd;
-#      int offset;
-# {
-#   unsigned char b[2];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 2);
-#   return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-#     int fd;
-#     int offset;
-# {
-#   unsigned char b[4];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 4);
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-#      void *ptr;
-# {
-#   unsigned char *b = ptr;
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-#     int argc;
-#     char *argv[];
-# {
-#     int dll;
-#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#     unsigned long export_rva, export_size, nsections, secptr, expptr;
-#     unsigned long name_rvas, nexp;
-#     unsigned char *expdata, *erva;
-#     char *filename, *dll_name;
-#
-#     filename = argv[1];
-#
-#     dll = open(filename, O_RDONLY|O_BINARY);
-#     if (dll < 1)
-# 	return 1;
-#
-#     dll_name = filename;
-#
-#     for (i=0; filename[i]; i++)
-# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-# 	    dll_name = filename + i +1;
-#
-#     pe_header_offset = pe_get32 (dll, 0x3c);
-#     opthdr_ofs = pe_header_offset + 4 + 20;
-#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-#     if (num_entries < 1) /* no exports */
-# 	return 1;
-#
-#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#     export_size = pe_get32 (dll, opthdr_ofs + 100);
-#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#     secptr = (pe_header_offset + 4 + 20 +
-# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-#     expptr = 0;
-#     for (i = 0; i < nsections; i++)
-#     {
-# 	char sname[8];
-# 	unsigned long secptr1 = secptr + 40 * i;
-# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# 	lseek(dll, secptr1, SEEK_SET);
-# 	read(dll, sname, 8);
-# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# 	{
-# 	    expptr = fptr + (export_rva - vaddr);
-# 	    if (export_rva + export_size > vaddr + vsize)
-# 		export_size = vsize - (export_rva - vaddr);
-# 	    break;
-# 	}
-#     }
-#
-#     expdata = (unsigned char*)malloc(export_size);
-#     lseek (dll, expptr, SEEK_SET);
-#     read (dll, expdata, export_size);
-#     erva = expdata - export_rva;
-#
-#     nexp = pe_as32 (expdata+24);
-#     name_rvas = pe_as32 (expdata+32);
-#
-#     printf ("EXPORTS\n");
-#     for (i = 0; i<nexp; i++)
-#     {
-# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#     }
-#
-#     return 0;
-# }
-# /* impgen.c ends here */
-
-EOF
-    ;;
-  esac
-
   # We use sed instead of cat because bash on DJGPP gets confused if
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
 
-  mv -f "${ofile}T" "$ofile" || \
-    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
+  mv -f "$cfgfile" "$ofile" || \
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
+])
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
 fi
+])# AC_LIBTOOL_CONFIG
 
-])# _LT_AC_LTCONFIG_HACK
 
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
 
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
+if test "$GCC" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
 
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
 
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
 
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
 
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
 
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
 
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
   ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+cygwin* | mingw* | pw32*)
+  symcode='[[ABCDGISTW]]'
   ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
+hpux*) # Its linker distinguishes data from code symbols
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+linux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDGIRSTW]]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris* | sysv5*)
+  symcode='[[BDRT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
 
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
 
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
 EOF
-	  fi ;;
-	esac
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
       fi
-      break
+
+      # Make sure that we snagged all the symbols we need.
+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
     fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -f conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
 else
-  AC_MSG_RESULT(no)
+  AC_MSG_RESULT(ok)
 fi
-])
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
 
 
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
+# ---------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
+[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+ ifelse([$1],[CXX],[
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | os2* | pw32*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
   else
-    MAGIC_CMD=:
+    case $host_os in
+      aix4* | aix5*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68)
+	  # Green Hills C++ Compiler
+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case "$cc_basename" in
+           xlc*)
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           ;;
+         esac
+       ;;
+      dgux*)
+	case $cc_basename in
+	  ec++)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx)
+	    # Green Hills C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | kfreebsd*-gnu | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+	    if test "$host_cpu" != ia64; then
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+	    case "$host_cpu" in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux*)
+	case $cc_basename in
+	  KCC)
+	    # KAI C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  icpc* | ecpc*)
+	    # Intel C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC)
+	    # Portland Group C++ compiler.
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  cxx)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC)
+	    # Rational C++ 2.4.1
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx)
+	    # Digital/Compaq C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      sco*)
+	case $cc_basename in
+	  CC)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx)
+	    # Green Hills C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC)
+	    # Sun C++ 4.x
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc)
+	    # Lucid
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC)
+	    # NonStop-UX NCC 3.20
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      unixware*)
+	;;
+      vxworks*)
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+    esac
   fi
-fi
-])
+],
+[
+  if test "$GCC" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
 
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
       ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       else
-	test "$with_gnu_ld" != yes && break
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
       fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case "$cc_basename" in
+         xlc*)
+         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
 
-# AC_PROG_LD_GNU -
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
+    hpux9* | hpux10* | hpux11*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
 
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
+    irix5* | irix6* | nonstopux*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
 
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+    newsos6)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-case $host_os in
-aix4* | aix5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      pgcc | pgf77 | pgf90)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      ccc*)
+        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      esac
+      ;;
 
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+    osf3* | osf4* | osf5*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
 
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
+    sco3.2v5*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
+      ;;
 
-cygwin* | mingw* | pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
+    solaris*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[[012]])
-    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
+    sunos4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-freebsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    unicos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       ;;
     esac
-  else
-    lt_cv_deplibs_check_method=pass_all
   fi
-  ;;
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
 
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
+    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
+    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+case "$host_os" in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+])
 
-hpux10.20*|hpux11*)
-  lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libc.sl
-  ;;
 
-irix5* | irix6*)
+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
+# ------------------------------------
+# See if the linker supports building shared libraries.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
+[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ifelse([$1],[CXX],[
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+  aix4* | aix5*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    fi
     ;;
+  pw32*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+  ;;
+  cygwin* | mingw*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
   *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
+  esac
+],[
+  runpath_var=
+  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_AC_TAGVAR(archive_cmds, $1)=
+  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+  _LT_AC_TAGVAR(module_cmds, $1)=
+  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(always_export_symbols, $1)=no
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_AC_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
 
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
   esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
 
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
-  fi
-  ;;
+  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
 
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<EOF 1>&2
 
-openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-  else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-  fi
-  ;;
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
 
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+EOF
+      fi
+      ;;
 
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
 
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-sysv5uw[[78]]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=no
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris* | sysv5*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+  linux*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      tmp_addflag=
+      case $CC,$host_cpu in
+      pgf77* | pgf90* )			# Portland Group f77 and f90 compilers
+        tmp_addflag=' -fpic' ;;
+      ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+        tmp_addflag=' -i_dynamic' ;;
+      efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+        tmp_addflag=' -i_dynamic -nofor_main' ;;
+      ifc* | ifort*)			# Intel Fortran compiler
+      	tmp_addflag=' -nofor_main' ;;
+      esac
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      supports_anon_versioning=no
+      case `$LD -v 2>/dev/null` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+        *\ 2.11.*) ;; # other 2.11 versions
+        *) supports_anon_versioning=yes ;;
+      esac
+      if test $supports_anon_versioning = yes; then
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+        $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+      else
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)=$_LT_AC_TAGVAR(archive_cmds, $1)
+      fi
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
     ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
 
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
+      runpath_var=LD_RUN_PATH
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+ 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+      fi
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$link_static_flag"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
 
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
-AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
       else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
       fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_AC_TAGVAR(archive_cmds, $1)=''
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  else
+  	  # We have old collect2
+  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+  	if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+  	fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       _LT_AC_SYS_LIBPATH_AIX
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 _LT_AC_SYS_LIBPATH_AIX
+	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  # -bexpall does not export symbols beginning with underscore (_)
+	  _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+	  # Exported symbols can be pulled into shared objects from archives
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds it's shared libraries.
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      # see comment about different semantics on the GNU ld section
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    bsdi[[45]]*)
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+      # FIXME: Should let the user specify the lib program.
+      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case "$host_os" in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
     fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
+      ;;
+
+    dgux*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    freebsd1*)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | kfreebsd*-gnu | dragonfly*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
+
+    hpux10* | hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	case "$host_cpu" in
+	hppa*64*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    openbsd*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	   ;;
+	 *)
+	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    sco3.2v5*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;;
+      esac
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4.2uw2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      hardcode_runpath_var=yes
+      runpath_var=LD_RUN_PATH
+      ;;
+
+   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      runpath_var='LD_RUN_PATH'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv5*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      # $CC -shared without GNU ld will not create a library from C++
+      # object files and a static libstdc++, better avoid it by now
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+  fi
 ])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_AC_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+        then
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+      ;;
+    esac
+  fi
   ;;
 esac
-])
+])# AC_LIBTOOL_PROG_LD_SHLIBS
 
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
 
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
+# _LT_AC_FILE_LTDLL_C
+# -------------------
+# Be careful that the start marker always follows a newline.
+AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+])# _LT_AC_FILE_LTDLL_C
+
+
+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+# ---------------------------------
+AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+
 
 # old names
 AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
@@ -4363,3 +6831,74 @@ AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
 # This is just to silence aclocal about the macro not being used
 ifelse([AC_DISABLE_FAST_INSTALL])
 
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+  AC_SUBST(GCJFLAGS)
+])
+
+AC_DEFUN([LT_AC_PROG_RC],
+[AC_CHECK_TOOL(RC, windres, no)
+])
+
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_MSG_RESULT([$SED])
+])
+
diff --git a/bin/config.guess b/bin/config.guess
index 0773d0f..892833f 100755
--- a/bin/config.guess
+++ b/bin/config.guess
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2004-03-03'
+timestamp='2005-02-10'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -53,7 +53,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -203,15 +203,15 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     amiga:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     cats:OpenBSD:*:*)
 	echo arm-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
     hp300:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
+    luna88k:OpenBSD:*:*)
+    	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     mac68k:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
@@ -227,21 +227,12 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     mvmeppc:OpenBSD:*:*)
 	echo powerpc-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
-    pegasos:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     sgi:OpenBSD:*:*)
-	echo mipseb-unknown-openbsd${UNAME_RELEASE}
+	echo mips64-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
     sun3:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     *:OpenBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
@@ -307,9 +298,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# 1.2 uses "1.2" for uname -r.
 	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
 	exit 0 ;;
-    Alpha*:OpenVMS:*:*)
-	echo alpha-hp-vms
-	exit 0 ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
@@ -331,6 +319,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:OS/390:*:*)
 	echo i370-ibm-openedition
 	exit 0 ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit 0 ;;
     *:OS400:*:*)
         echo powerpc-ibm-os400
 	exit 0 ;;
@@ -354,7 +345,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     DRS?6000:unix:4.0:6*)
 	echo sparc-icl-nx6
 	exit 0 ;;
-    DRS?6000:UNIX_SV:4.2*:7*)
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
 	case `/usr/bin/uname -p` in
 	    sparc) echo sparc-icl-nx7 && exit 0 ;;
 	esac ;;
@@ -764,7 +755,7 @@ EOF
 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
     *:UNICOS/mp:*:*)
-	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
@@ -787,21 +778,7 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit 0 ;;
     *:FreeBSD:*:*)
-	# Determine whether the default compiler uses glibc.
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#if __GLIBC__ >= 2
-	LIBC=gnu
-	#else
-	LIBC=
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	# GNU/KFreeBSD systems have a "k" prefix to indicate we are using
-	# FreeBSD's kernel, but not the complete OS.
-	case ${LIBC} in gnu) kernel_only='k' ;; esac
-	echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit 0 ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
@@ -827,6 +804,9 @@ EOF
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
 	exit 0 ;;
+    amd64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit 0 ;;
     p*:CYGWIN*:*)
 	echo powerpcle-unknown-cygwin
 	exit 0 ;;
@@ -850,9 +830,18 @@ EOF
     cris:Linux:*:*)
 	echo cris-axis-linux-gnu
 	exit 0 ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit 0 ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit 0 ;;
     ia64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit 0 ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
     m68*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit 0 ;;
@@ -1093,9 +1082,9 @@ EOF
     M680?0:D-NIX:5.3:*)
 	echo m68k-diab-dnix
 	exit 0 ;;
-    M68*:*:R3V[567]*:*)
+    M68*:*:R3V[5678]*:*)
 	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
@@ -1193,9 +1182,10 @@ EOF
 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
 	exit 0 ;;
     *:Darwin:*:*)
-	case `uname -p` in
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
 	    *86) UNAME_PROCESSOR=i686 ;;
-	    powerpc) UNAME_PROCESSOR=powerpc ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit 0 ;;
@@ -1210,6 +1200,9 @@ EOF
     *:QNX:*:4*)
 	echo i386-pc-qnx
 	exit 0 ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit 0 ;;
     NSR-?:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
 	exit 0 ;;
@@ -1257,6 +1250,16 @@ EOF
     *:DragonFly:*:*)
 	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit 0 ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms && exit 0 ;;
+	    I*) echo ia64-dec-vms && exit 0 ;;
+	    V*) echo vax-dec-vms && exit 0 ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit 0 ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
diff --git a/bin/config.sub b/bin/config.sub
index 264f820..d8fd2f8 100755
--- a/bin/config.sub
+++ b/bin/config.sub
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2004-02-23'
+timestamp='2005-02-10'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -70,7 +70,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -145,7 +145,7 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis)
+	-apple | -axis | -knuth | -cray)
 		os=
 		basic_machine=$1
 		;;
@@ -237,7 +237,7 @@ case $basic_machine in
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m68000 | m68k | m88k | mcore \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -262,12 +262,12 @@ case $basic_machine in
 	| pyramid \
 	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
+	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
 	| strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
@@ -300,7 +300,7 @@ case $basic_machine in
 	| avr-* \
 	| bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | cydra-* \
+	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
 	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
@@ -308,9 +308,9 @@ case $basic_machine in
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32r-* \
+	| m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -326,8 +326,9 @@ case $basic_machine in
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
 	| msp430-* \
-	| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
@@ -336,14 +337,14 @@ case $basic_machine in
 	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
-	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
 	| ymp-* \
 	| z8k-*)
 		;;
@@ -445,6 +446,10 @@ case $basic_machine in
 		basic_machine=j90-cray
 		os=-unicos
 		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
 	cr16c)
 		basic_machine=cr16c-unknown
 		os=-elf
@@ -452,6 +457,9 @@ case $basic_machine in
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
 	cris | cris-* | etrax*)
 		basic_machine=cris-axis
 		;;
@@ -481,6 +489,10 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
 	dpx20 | dpx20-*)
 		basic_machine=rs6000-bull
 		os=-bosx
@@ -659,10 +671,6 @@ case $basic_machine in
 	mips3*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
 		;;
-	mmix*)
-		basic_machine=mmix-knuth
-		os=-mmixware
-		;;
 	monitor)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -743,10 +751,6 @@ case $basic_machine in
 	np1)
 		basic_machine=np1-gould
 		;;
-	nv1)
-		basic_machine=nv1-cray
-		os=-unicosmp
-		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -1029,6 +1033,10 @@ case $basic_machine in
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
@@ -1059,6 +1067,9 @@ case $basic_machine in
 	romp)
 		basic_machine=romp-ibm
 		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
 	rs6000)
 		basic_machine=rs6000-ibm
 		;;
@@ -1081,7 +1092,7 @@ case $basic_machine in
 	sh64)
 		basic_machine=sh64-unknown
 		;;
-	sparc | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1294,6 +1305,9 @@ case $os in
 	-kaos*)
 		os=-kaos
 		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
 	-none)
 		;;
 	*)
@@ -1374,6 +1388,9 @@ case $basic_machine in
 	*-ibm)
 		os=-aix
 		;;
+    	*-knuth)
+		os=-mmixware
+		;;
 	*-wec)
 		os=-proelf
 		;;
diff --git a/bin/ltmain.sh b/bin/ltmain.sh
index 9987c69..b9a37fc 100644
--- a/bin/ltmain.sh
+++ b/bin/ltmain.sh
@@ -1,7 +1,7 @@
 # ltmain.sh - Provide generalized library-building support services.
 # NOTE: Changing this file will not affect anything until you rerun configure.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
@@ -24,6 +24,34 @@
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+basename="s,^.*/,,g"
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" | $SED $basename`
+modename="$progname"
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.5.14
+TIMESTAMP=" (1.1220.2.195 2005/02/12 12:12:33)"
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+  setopt NO_GLOB_SUBST
+fi
+
 # Check that we have a working $echo.
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
@@ -36,7 +64,7 @@ elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
   :
 else
   # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
 fi
 
 if test "X$1" = X--fallback-echo; then
@@ -45,19 +73,9 @@ if test "X$1" = X--fallback-echo; then
   cat <<EOF
 $*
 EOF
-  exit 0
+  exit $EXIT_SUCCESS
 fi
 
-# The name of this program.
-progname=`$echo "$0" | sed 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.4.2
-TIMESTAMP=" (1.922.2.53 2001/09/11 03:18:52)"
-
 default_mode=
 help="Try \`$progname --help' for more information."
 magic="%%%MAGIC variable%%%"
@@ -67,10 +85,19 @@ rm="rm -f"
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
+Xsed="${SED}"' -e 1s/^X//'
 sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-SP2NL='tr \040 \012'
-NL2SP='tr \015\012 \040\040'
+# test EBCDIC or ASCII
+case `echo A|tr A '\301'` in
+ A) # EBCDIC based system
+  SP2NL="tr '\100' '\n'"
+  NL2SP="tr '\r\n' '\100\100'"
+  ;;
+ *) # Assume ASCII based system
+  SP2NL="tr '\040' '\012'"
+  NL2SP="tr '\015\012' '\040\040'"
+  ;;
+esac
 
 # NLS nuisances.
 # Only set LANG and LC_ALL to C if already set.
@@ -85,12 +112,13 @@ if test "${LANG+set}" = set; then
 fi
 
 # Make sure IFS has a sensible default
-: ${IFS=" 	"}
+: ${IFS=" 	
+"}
 
 if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  echo "$modename: not configured to build any kind of library" 1>&2
-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
+  $echo "$modename: not configured to build any kind of library" 1>&2
+  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit $EXIT_FAILURE
 fi
 
 # Global variables.
@@ -104,9 +132,250 @@ show_help=
 execute_dlfiles=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
+quote_scanset='[[~#^*{};<>?'"'"' 	]'
+
+#####################################
+# Shell function definitions:
+# This seems to be the best place for them
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 | \
+	sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
+      if test "X$win32_nmres" = "Ximport" ; then
+        win32_libid_type="x86 archive import"
+      else
+        win32_libid_type="x86 archive static"
+      fi
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $echo $win32_libid_type
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	case $arg in
+	  *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	CC_quoted="$CC_quoted $arg"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	    # Double-quote args containing other shell metacharacters.
+	    case $arg in
+	      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    CC_quoted="$CC_quoted $arg"
+	  done
+	    case "$@ " in
+	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  $echo "$modename: unable to infer tagged configuration"
+	  $echo "$modename: specify a tag with \`--tag'" 1>&2
+	  exit $EXIT_FAILURE
+#        else
+#          $echo "$modename: using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    f_ex_an_ar_lib=`$echo "X$f_ex_an_ar_oldlib" | $Xsed -e 's%^.*/%%'`
+
+    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
+      $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
+      $show "cp $f_ex_an_ar_oldlib $f_ex_an_ar_dir/$f_ex_an_ar_lib"
+      $run eval "cp \$f_ex_an_ar_oldlib \$f_ex_an_ar_dir/\$f_ex_an_ar_lib"
+      $AR t "$f_ex_an_ar_oldlib" | sort | uniq -c \
+	| $EGREP -v '^[ 	]*1[ 	]' | while read count name
+      do
+	i=1
+	while test "$i" -le "$count"
+	  do
+	  # Put our $i before any first dot (extension)
+	  # Never overwrite any file
+	  name_to="$name"
+	  while test "X$name_to" = "X$name" || test -f "$f_ex_an_ar_dir/$name_to"
+	    do
+	    name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
+	  done
+	  $show "(cd $f_ex_an_ar_dir && $AR x  $f_ex_an_ar_lib '$name' && $mv '$name' '$name_to')"
+	  $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_lib '$name' && $mv '$name' '$name_to' && $AR -d \$f_ex_an_ar_lib '$name')" || exit $?
+	  i=`expr $i + 1`
+	done
+      done
+      $show "$rm $f_ex_an_ar_dir/$f_ex_an_ar_lib"
+      $run eval "$rm \$f_ex_an_ar_dir/\$f_ex_an_ar_lib"
+    fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    my_status=""
+
+    $show "${rm}r $my_gentop"
+    $run ${rm}r "$my_gentop"
+    $show "$mkdir $my_gentop"
+    $run $mkdir "$my_gentop"
+    my_status=$?
+    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+      exit $my_status
+    fi
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+      my_xdir="$my_gentop/$my_xlib"
+
+      $show "${rm}r $my_xdir"
+      $run ${rm}r "$my_xdir"
+      $show "$mkdir $my_xdir"
+      $run $mkdir "$my_xdir"
+      status=$?
+      if test "$status" -ne 0 && test ! -d "$my_xdir"; then
+	exit $status
+      fi
+      case $host in
+      *-darwin*)
+	$show "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	if test -z "$run"; then
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+	  if test -n "$darwin_arches"; then 
+	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      lipo -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    ${rm}r unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd "$darwin_orig_dir"
+ 	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	fi # $run
+      ;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+    func_extract_archives_result="$my_oldobjs"
+}
+# End of Shell function definitions
+#####################################
+
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
 
 # Parse our command line options once, thoroughly.
-while test $# -gt 0
+while test "$#" -gt 0
 do
   arg="$1"
   shift
@@ -122,6 +391,34 @@ do
     execute_dlfiles)
       execute_dlfiles="$execute_dlfiles $arg"
       ;;
+    tag)
+      tagname="$arg"
+      preserve_args="${preserve_args}=$arg"
+
+      # Check whether tagname contains only valid characters
+      case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+	$echo "$progname: invalid tag name: $tagname" 1>&2
+	exit $EXIT_FAILURE
+	;;
+      esac
+
+      case $tagname in
+      CC)
+	# Don't test for the "default" C tag, as we know, it's there, but
+	# not specially marked.
+	;;
+      *)
+	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+	  taglist="$taglist $tagname"
+	  # Evaluate the configuration.
+	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+	else
+	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
+	fi
+	;;
+      esac
+      ;;
     *)
       eval "$prev=\$arg"
       ;;
@@ -139,18 +436,27 @@ do
     ;;
 
   --version)
-    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    exit 0
+    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    $echo
+    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
+    $echo "This is free software; see the source for copying conditions.  There is NO"
+    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+    exit $?
     ;;
 
   --config)
-    sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
-    exit 0
+    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+    done
+    exit $?
     ;;
 
   --debug)
-    echo "$progname: enabling shell trace mode"
+    $echo "$progname: enabling shell trace mode"
     set -x
+    preserve_args="$preserve_args $arg"
     ;;
 
   --dry-run | -n)
@@ -158,18 +464,18 @@ do
     ;;
 
   --features)
-    echo "host: $host"
+    $echo "host: $host"
     if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
+      $echo "enable shared libraries"
     else
-      echo "disable shared libraries"
+      $echo "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
+      $echo "enable static libraries"
     else
-      echo "disable static libraries"
+      $echo "disable static libraries"
     fi
-    exit 0
+    exit $?
     ;;
 
   --finish) mode="finish" ;;
@@ -177,8 +483,19 @@ do
   --mode) prevopt="--mode" prev=mode ;;
   --mode=*) mode="$optarg" ;;
 
+  --preserve-dup-deps) duplicate_deps="yes" ;;
+
   --quiet | --silent)
     show=:
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --tag) prevopt="--tag" prev=tag ;;
+  --tag=*)
+    set tag "$optarg" ${1+"$@"}
+    shift
+    prev=tag
+    preserve_args="$preserve_args --tag"
     ;;
 
   -dlopen)
@@ -189,7 +506,7 @@ do
   -*)
     $echo "$modename: unrecognized option \`$arg'" 1>&2
     $echo "$help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
     ;;
 
   *)
@@ -202,7 +519,7 @@ done
 if test -n "$prevopt"; then
   $echo "$modename: option \`$prevopt' requires an argument" 1>&2
   $echo "$help" 1>&2
-  exit 1
+  exit $EXIT_FAILURE
 fi
 
 # If this variable is set in any of the actions, the command in it
@@ -214,8 +531,10 @@ if test -z "$show_help"; then
 
   # Infer the operation mode.
   if test -z "$mode"; then
+    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
     case $nonopt in
-    *cc | *++ | gcc* | *-gcc*)
+    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
       mode=link
       for arg
       do
@@ -256,7 +575,7 @@ if test -z "$show_help"; then
   if test -n "$execute_dlfiles" && test "$mode" != execute; then
     $echo "$modename: unrecognized option \`-dlopen'" 1>&2
     $echo "$help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
   fi
 
   # Change the help message to a mode-specific one.
@@ -270,158 +589,127 @@ if test -z "$show_help"; then
     modename="$modename: compile"
     # Get the compilation command and the source file.
     base_compile=
-    prev=
-    lastarg=
-    srcfile="$nonopt"
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
     suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
 
-    user_target=no
     for arg
     do
-      case $prev in
-      "") ;;
-      xcompiler)
-	# Aesthetically quote the previous argument.
-	prev=
-	lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-
-	case $arg in
-	# Double-quote args containing other shell metacharacters.
-	# Many Bourne shells cannot handle close brackets correctly
-	# in scan sets, so we specify it separately.
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
+      case "$arg_mode" in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
 
-	# Add the previous argument to base_compile.
-	if test -z "$base_compile"; then
-	  base_compile="$lastarg"
-	else
-	  base_compile="$base_compile $lastarg"
-	fi
+      target )
+	libobj="$arg"
+	arg_mode=normal
 	continue
 	;;
-      esac
 
-      # Accept any command-line options.
-      case $arg in
-      -o)
-	if test "$user_target" != "no"; then
-	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	  exit 1
-	fi
-	user_target=next
-	;;
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  if test -n "$libobj" ; then
+	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  arg_mode=target
+	  continue
+	  ;;
 
-      -static)
-	build_old_libs=yes
-	continue
-	;;
+	-static | -prefer-pic | -prefer-non-pic)
+	  later="$later $arg"
+	  continue
+	  ;;
 
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
 
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
 
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
+	-Wc,*)
+	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+ 	  for arg in $args; do
+	    IFS="$save_ifs"
 
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
-	lastarg=
-	save_ifs="$IFS"; IFS=','
-	for arg in $args; do
+	    # Double-quote args containing other shell metacharacters.
+	    # Many Bourne shells cannot handle close brackets correctly
+	    # in scan sets, so we specify it separately.
+	    case $arg in
+	      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    lastarg="$lastarg $arg"
+	  done
 	  IFS="$save_ifs"
+	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
 
-	  # Double-quote args containing other shell metacharacters.
-	  # Many Bourne shells cannot handle close brackets correctly
-	  # in scan sets, so we specify it separately.
-	  case $arg in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    arg="\"$arg\""
-	    ;;
-	  esac
-	  lastarg="$lastarg $arg"
-	done
-	IFS="$save_ifs"
-	lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
-	# Add the arguments to base_compile.
-	if test -z "$base_compile"; then
-	  base_compile="$lastarg"
-	else
+	  # Add the arguments to base_compile.
 	  base_compile="$base_compile $lastarg"
-	fi
-	continue
-	;;
-      esac
+	  continue
+	  ;;
 
-      case $user_target in
-      next)
-	# The next one is the -o target name
-	user_target=yes
-	continue
-	;;
-      yes)
-	# We got the output file
-	user_target=set
-	libobj="$arg"
-	continue
+	* )
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
 	;;
-      esac
-
-      # Accept the current argument as the source file.
-      lastarg="$srcfile"
-      srcfile="$arg"
+      esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.
-
-      # Backslashify any backslashes, double quotes, and dollar signs.
-      # These are the only characters that are still specially
-      # interpreted inside of double-quoted scrings.
       lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
 
+      case $lastarg in
       # Double-quote args containing other shell metacharacters.
       # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      case $lastarg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+      # in scan sets (worked around with variable expansion),
+      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+      # at all, so we specify them separately.
+      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	lastarg="\"$lastarg\""
 	;;
       esac
 
-      # Add the previous argument to base_compile.
-      if test -z "$base_compile"; then
-	base_compile="$lastarg"
-      else
-	base_compile="$base_compile $lastarg"
-      fi
-    done
+      base_compile="$base_compile $lastarg"
+    done # for arg
 
-    case $user_target in
-    set)
+    case $arg_mode in
+    arg)
+      $echo "$modename: you must specify an argument for -Xcompile"
+      exit $EXIT_FAILURE
       ;;
-    no)
-      # Get the name of the library object.
-      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+    target)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit $EXIT_FAILURE
       ;;
     *)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit 1
+      # Get the name of the library object.
+      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
       ;;
     esac
 
     # Recognize several different file suffixes.
     # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSfmso]'
+    xform='[cCFSifmso]'
     case $libobj in
     *.ada) xform=ada ;;
     *.adb) xform=adb ;;
@@ -429,10 +717,13 @@ if test -z "$show_help"; then
     *.asm) xform=asm ;;
     *.c++) xform=c++ ;;
     *.cc) xform=cc ;;
+    *.ii) xform=ii ;;
+    *.class) xform=class ;;
     *.cpp) xform=cpp ;;
     *.cxx) xform=cxx ;;
     *.f90) xform=f90 ;;
     *.for) xform=for ;;
+    *.java) xform=java ;;
     esac
 
     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -441,25 +732,55 @@ if test -z "$show_help"; then
     *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
     *)
       $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
       ;;
     esac
 
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$xdir" = "X$obj"; then
+      xdir=
+    else
+      xdir=$xdir/
+    fi
+    lobj=${xdir}$objdir/$objname
+
     if test -z "$base_compile"; then
       $echo "$modename: you must specify a compilation command" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     # Delete any leftover library objects.
     if test "$build_old_libs" = yes; then
-      removelist="$obj $libobj"
+      removelist="$obj $lobj $libobj ${libobj}T"
     else
-      removelist="$libobj"
+      removelist="$lobj $libobj ${libobj}T"
     fi
 
     $run $rm $removelist
-    trap "$run $rm $removelist; exit 1" 1 2 15
+    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
 
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in
@@ -467,7 +788,7 @@ if test -z "$show_help"; then
       pic_mode=default
       ;;
     esac
-    if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
       # non-PIC code in shared libraries is not supported
       pic_mode=default
     fi
@@ -478,8 +799,9 @@ if test -z "$show_help"; then
       output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
       removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit 1" 1 2 15
+      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
     else
+      output_obj=
       need_locks=no
       lockfile=
     fi
@@ -487,13 +809,13 @@ if test -z "$show_help"; then
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then
-      until $run ln "$0" "$lockfile" 2>/dev/null; do
+      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
 	$show "Waiting for $lockfile to be removed"
 	sleep 2
       done
     elif test "$need_locks" = warn; then
       if test -f "$lockfile"; then
-	echo "\
+	$echo "\
 *** ERROR, $lockfile exists and contains:
 `cat $lockfile 2>/dev/null`
 
@@ -505,68 +827,67 @@ avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
-      echo $srcfile > "$lockfile"
+      $echo $srcfile > "$lockfile"
     fi
 
     if test -n "$fix_srcfile_path"; then
       eval srcfile=\"$fix_srcfile_path\"
     fi
 
+    $run $rm "$libobj" "${libobj}T"
+
+    # Create a libtool object file (analogous to a ".la" file),
+    # but don't create it if we're doing a dry run.
+    test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
+
     # Only build a PIC object if we are building libtool libraries.
     if test "$build_libtool_libs" = yes; then
       # Without this assignment, base_compile gets emptied.
       fbsd_hideous_sh_bug=$base_compile
 
       if test "$pic_mode" != no; then
-	# All platforms use -DPIC, to notify preprocessed assembler code.
-	command="$base_compile $srcfile $pic_flag -DPIC"
+	command="$base_compile $srcfile $pic_flag"
       else
 	# Don't build PIC code
 	command="$base_compile $srcfile"
       fi
-      if test "$build_old_libs" = yes; then
-	lo_libobj="$libobj"
-	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$dir" = "X$libobj"; then
-	  dir="$objdir"
-	else
-	  dir="$dir/$objdir"
-	fi
-	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
 
-	if test -d "$dir"; then
-	  $show "$rm $libobj"
-	  $run $rm $libobj
-	else
-	  $show "$mkdir $dir"
-	  $run $mkdir $dir
-	  status=$?
-	  if test $status -ne 0 && test ! -d $dir; then
-	    exit $status
-	  fi
+      if test ! -d "${xdir}$objdir"; then
+	$show "$mkdir ${xdir}$objdir"
+	$run $mkdir ${xdir}$objdir
+	status=$?
+	if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
+	  exit $status
 	fi
       fi
-      if test "$compiler_o_lo" = yes; then
-	output_obj="$libobj"
-	command="$command -o $output_obj"
-      elif test "$compiler_c_o" = yes; then
-	output_obj="$obj"
-	command="$command -o $output_obj"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	command="$command -o $lobj"
       fi
 
-      $run $rm "$output_obj"
+      $run $rm "$lobj" "$output_obj"
+
       $show "$command"
       if $run eval "$command"; then :
       else
 	test -n "$output_obj" && $run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       if test "$need_locks" = warn &&
-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-	echo "\
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$echo "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -581,13 +902,13 @@ avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed, then go on to compile the next one
-      if test x"$output_obj" != x"$libobj"; then
-	$show "$mv $output_obj $libobj"
-	if $run $mv $output_obj $libobj; then :
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	$show "$mv $output_obj $lobj"
+	if $run $mv $output_obj $lobj; then :
 	else
 	  error=$?
 	  $run $rm $removelist
@@ -595,48 +916,23 @@ compiler."
 	fi
       fi
 
-      # If we have no pic_flag, then copy the object into place and finish.
-      if (test -z "$pic_flag" || test "$pic_mode" != default) &&
-	 test "$build_old_libs" = yes; then
-	# Rename the .lo from within objdir to obj
-	if test -f $obj; then
-	  $show $rm $obj
-	  $run $rm $obj
-	fi
+      # Append the name of the PIC object to the libtool object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
 
-	$show "$mv $libobj $obj"
-	if $run $mv $libobj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
+EOF
 
-	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$xdir" = "X$obj"; then
-	  xdir="."
-	else
-	  xdir="$xdir"
-	fi
-	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
-	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-	# Now arrange that obj and lo_libobj become the same file
-	$show "(cd $xdir && $LN_S $baseobj $libobj)"
-	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
-	  # Unlock the critical section if it was locked
-	  if test "$need_locks" != no; then
-	    $run $rm "$lockfile"
-	  fi
-	  exit 0
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+        suppress_output=' >/dev/null 2>&1'
       fi
+    else
+      # No PIC object so indicate it doesn't exist in the libtool
+      # object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
 
-      # Allow error messages only from the first compilation.
-      suppress_output=' >/dev/null 2>&1'
+EOF
     fi
 
     # Only build a position-dependent object if we build old libraries.
@@ -645,27 +941,25 @@ compiler."
 	# Don't build PIC code
 	command="$base_compile $srcfile"
       else
-	# All platforms use -DPIC, to notify preprocessed assembler code.
-	command="$base_compile $srcfile $pic_flag -DPIC"
+	command="$base_compile $srcfile $pic_flag"
       fi
       if test "$compiler_c_o" = yes; then
 	command="$command -o $obj"
-	output_obj="$obj"
       fi
 
       # Suppress compiler output if we already did a PIC compilation.
       command="$command$suppress_output"
-      $run $rm "$output_obj"
+      $run $rm "$obj" "$output_obj"
       $show "$command"
       if $run eval "$command"; then :
       else
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       if test "$need_locks" = warn &&
-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-	echo "\
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$echo "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -680,11 +974,11 @@ avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed
-      if test x"$output_obj" != x"$obj"; then
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
 	$show "$mv $output_obj $obj"
 	if $run $mv $output_obj $obj; then :
 	else
@@ -694,29 +988,31 @@ compiler."
 	fi
       fi
 
-      # Create an invalid libtool object if no PIC, so that we do not
-      # accidentally link it into a program.
-      if test "$build_libtool_libs" != yes; then
-	$show "echo timestamp > $libobj"
-	$run eval "echo timestamp > \$libobj" || exit $?
-      else
-	# Move the .lo from within objdir
-	$show "$mv $libobj $lo_libobj"
-	if $run $mv $libobj $lo_libobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+    else
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
     fi
 
+    $run $mv "${libobj}T" "${libobj}"
+
     # Unlock the critical section if it was locked
     if test "$need_locks" != no; then
       $run $rm "$lockfile"
     fi
 
-    exit 0
+    exit $EXIT_SUCCESS
     ;;
 
   # libtool link mode
@@ -727,7 +1023,7 @@ compiler."
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
       # which system we are compiling for in order to pass an extra
-      # flag for every libtool invokation.
+      # flag for every libtool invocation.
       # allow_undefined=no
 
       # FIXME: Unfortunately, there are problems with the above when trying
@@ -742,6 +1038,7 @@ compiler."
       ;;
     esac
     libtool_args="$nonopt"
+    base_compile="$nonopt $@"
     compile_command="$nonopt"
     finalize_command="$nonopt"
 
@@ -757,6 +1054,7 @@ compiler."
     linker_flags=
     dllsearchpath=
     lib_search_path=`pwd`
+    inst_prefix_dir=
 
     avoid_version=no
     dlfiles=
@@ -771,6 +1069,8 @@ compiler."
     module=no
     no_install=no
     objs=
+    non_pic_objects=
+    precious_files_regex=
     prefer_static_libs=no
     preload=no
     prev=
@@ -782,6 +1082,9 @@ compiler."
     temp_rpath=
     thread_safe=no
     vinfo=
+    vinfo_number=no
+
+    func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
     for arg
@@ -812,11 +1115,11 @@ compiler."
     test -n "$old_archive_from_new_cmds" && build_old_libs=yes
 
     # Go through the arguments, transforming them on the way.
-    while test $# -gt 0; do
+    while test "$#" -gt 0; do
       arg="$1"
       shift
       case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
 	;;
       *) qarg=$arg ;;
@@ -877,7 +1180,7 @@ compiler."
 	  export_symbols="$arg"
 	  if test ! -f "$arg"; then
 	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	  prev=
 	  continue
@@ -887,18 +1190,135 @@ compiler."
 	  prev=
 	  continue
 	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
 	release)
 	  release="-$arg"
 	  prev=
 	  continue
 	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat $save_arg`
+	    do
+#	      moreargs="$moreargs $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		# If there is no directory component, then add one.
+		case $arg in
+		*/* | *\\*) . $arg ;;
+		*) . ./$arg ;;
+		esac
+
+		if test -z "$pic_object" || \
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none && \
+		   test "$non_pic_object" = none; then
+		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+		  exit $EXIT_FAILURE
+		fi
+
+		# Extract subdirectory from the argument.
+		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+		if test "X$xdir" = "X$arg"; then
+		  xdir=
+		else
+		  xdir="$xdir/"
+		fi
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      dlfiles="$dlfiles $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    dlprefiles="$dlprefiles $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  libobjs="$libobjs $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if test -z "$run"; then
+		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+		  exit $EXIT_FAILURE
+		else
+		  # Dry-run case.
+
+		  # Extract subdirectory from the argument.
+		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+		  if test "X$xdir" = "X$arg"; then
+		    xdir=
+		  else
+		    xdir="$xdir/"
+		  fi
+
+		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+		  libobjs="$libobjs $pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		fi
+	      fi
+	    done
+	  else
+	    $echo "$modename: link input file \`$save_arg' does not exist"
+	    exit $EXIT_FAILURE
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
 	rpath | xrpath)
 	  # We need an absolute path.
 	  case $arg in
 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
 	  *)
 	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	    ;;
 	  esac
 	  if test "$prev" = rpath; then
@@ -930,13 +1350,31 @@ compiler."
 	  finalize_command="$finalize_command $wl$qarg"
 	  continue
 	  ;;
+	xcclinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	shrext)
+  	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+        darwin_framework)
+	  compiler_flags="$compiler_flags $arg"
+	  prev=
+	  continue
+	  ;;
 	*)
 	  eval "$prev=\"\$arg\""
 	  prev=
 	  continue
 	  ;;
 	esac
-      fi # test -n $prev
+      fi # test -n "$prev"
 
       prevarg="$arg"
 
@@ -978,7 +1416,7 @@ compiler."
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
 	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
@@ -988,11 +1426,22 @@ compiler."
 	continue
 	;;
 
+      -framework)
+        prev=darwin_framework
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
       # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
       # so, if we see these flags be careful not to treat them like -L
       -L[A-Z][A-Z]*:*)
 	case $with_gcc/$host in
-	no/*-*-irix*)
+	no/*-*-irix* | /*-*-irix*)
 	  compile_command="$compile_command $arg"
 	  finalize_command="$finalize_command $arg"
 	  ;;
@@ -1009,7 +1458,7 @@ compiler."
 	  absdir=`cd "$dir" && pwd`
 	  if test -z "$absdir"; then
 	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	  dir="$absdir"
 	  ;;
@@ -1043,28 +1492,78 @@ compiler."
 	    # These systems don't actually have a C library (as such)
 	    test "X$arg" = "X-lc" && continue
 	    ;;
-	  *-*-openbsd*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
 	    test "X$arg" = "X-lc" && continue
 	    ;;
-	  esac
-	 elif test "X$arg" = "X-lc_r"; then
-	  case $host in
-	  *-*-openbsd*)
-	    # Do not include libc_r directly, use -pthread flag.
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    deplibs="$deplibs -framework System"
 	    continue
-	    ;;
 	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
 	fi
 	deplibs="$deplibs $arg"
 	continue
 	;;
 
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      -model)
+	compile_command="$compile_command $arg"
+	compiler_flags="$compiler_flags $arg"
+	finalize_command="$finalize_command $arg"
+	prev=xcompiler
+	continue
+	;;
+
+     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+	compiler_flags="$compiler_flags $arg"
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
       -module)
 	module=yes
 	continue
 	;;
 
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m* pass through architecture-specific compiler args for GCC
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
+
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	  arg="\"$arg\""
+	  ;;
+	esac
+        compile_command="$compile_command $arg"
+        finalize_command="$finalize_command $arg"
+        if test "$with_gcc" = "yes" ; then
+          compiler_flags="$compiler_flags $arg"
+        fi
+        continue
+        ;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
       -no-fast-install)
 	fast_install=no
 	continue
@@ -1089,8 +1588,18 @@ compiler."
 	continue
 	;;
 
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
       -o) prev=output ;;
 
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
       -release)
 	prev=release
 	continue
@@ -1113,7 +1622,7 @@ compiler."
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 	case "$xrpath " in
@@ -1141,6 +1650,11 @@ compiler."
 	prev=vinfo
 	continue
 	;;
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
 
       -Wc,*)
 	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
@@ -1149,7 +1663,7 @@ compiler."
 	for flag in $args; do
 	  IFS="$save_ifs"
 	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	    flag="\"$flag\""
 	    ;;
 	  esac
@@ -1167,7 +1681,7 @@ compiler."
 	for flag in $args; do
 	  IFS="$save_ifs"
 	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	    flag="\"$flag\""
 	    ;;
 	  esac
@@ -1189,41 +1703,118 @@ compiler."
 	continue
 	;;
 
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
       # Some other compiler flag.
       -* | +*)
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
 	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	  arg="\"$arg\""
 	  ;;
 	esac
 	;;
 
-      *.lo | *.$objext)
-	# A library or standard object.
-	if test "$prev" = dlfiles; then
-	  # This file was specified with -dlopen.
-	  if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-	    dlfiles="$dlfiles $arg"
-	    prev=
-	    continue
-	  else
-	    # If libtool objects are unsupported, then we need to preload.
-	    prev=dlprefiles
-	  fi
-	fi
+      *.$objext)
+	# A standard object.
+	objs="$objs $arg"
+	;;
 
-	if test "$prev" = dlprefiles; then
-	  # Preload the old-style object.
-	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
-	  prev=
-	else
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  # If there is no directory component, then add one.
 	  case $arg in
-	  *.lo) libobjs="$libobjs $arg" ;;
-	  *) objs="$objs $arg" ;;
+	  */* | *\\*) . $arg ;;
+	  *) . ./$arg ;;
 	  esac
+
+	  if test -z "$pic_object" || \
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none && \
+	     test "$non_pic_object" = none; then
+	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$xdir" = "X$arg"; then
+	    xdir=
+ 	  else
+	    xdir="$xdir/"
+	  fi
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		dlfiles="$dlfiles $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      dlprefiles="$dlprefiles $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    libobjs="$libobjs $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if test -z "$run"; then
+	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+	    exit $EXIT_FAILURE
+	  else
+	    # Dry-run case.
+
+	    # Extract subdirectory from the argument.
+	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	    if test "X$xdir" = "X$arg"; then
+	      xdir=
+	    else
+	      xdir="$xdir/"
+	    fi
+
+	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+	    libobjs="$libobjs $pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	  fi
 	fi
 	;;
 
@@ -1257,7 +1848,7 @@ compiler."
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
 	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	  arg="\"$arg\""
 	  ;;
 	esac
@@ -1274,7 +1865,7 @@ compiler."
     if test -n "$prev"; then
       $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
@@ -1283,6 +1874,7 @@ compiler."
       finalize_command="$finalize_command $arg"
     fi
 
+    oldlibs=
     # calculate the name of the file, without its directory
     outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
     libobjs_save="$libobjs"
@@ -1303,11 +1895,11 @@ compiler."
       output_objdir="$output_objdir/$objdir"
     fi
     # Create the object directory.
-    if test ! -d $output_objdir; then
+    if test ! -d "$output_objdir"; then
       $show "$mkdir $output_objdir"
       $run $mkdir $output_objdir
       status=$?
-      if test $status -ne 0 && test ! -d $output_objdir; then
+      if test "$status" -ne 0 && test ! -d "$output_objdir"; then
 	exit $status
       fi
     fi
@@ -1317,7 +1909,7 @@ compiler."
     "")
       $echo "$modename: you must specify an output file" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
       ;;
     *.$libext) linkmode=oldlib ;;
     *.lo | *.$objext) linkmode=obj ;;
@@ -1325,16 +1917,47 @@ compiler."
     *) linkmode=prog ;; # Anything else should be a program.
     esac
 
+    case $host in
+    *cygwin* | *mingw* | *pw32*)
+      # don't eliminate duplications in $postdeps and $predeps
+      duplicate_compiler_generated_deps=yes
+      ;;
+    *)
+      duplicate_compiler_generated_deps=$duplicate_deps
+      ;;
+    esac
     specialdeplibs=
+
     libs=
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      case "$libs " in
-      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-      esac
+      if test "X$duplicate_deps" = "Xyes" ; then
+	case "$libs " in
+	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	esac
+      fi
       libs="$libs $deplib"
     done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+	  esac
+	  pre_post_deps="$pre_post_deps $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
     deplibs=
     newdependency_libs=
     newlib_search_path=
@@ -1349,7 +1972,7 @@ compiler."
 	  *.la) ;;
 	  *)
 	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	    ;;
 	  esac
 	done
@@ -1366,39 +1989,55 @@ compiler."
 	;;
     esac
     for pass in $passes; do
-      if test $linkmode = prog; then
-	# Determine which files to process
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
 	case $pass in
-	dlopen)
-	  libs="$dlfiles"
-	  save_deplibs="$deplibs" # Collect dlpreopened libraries
-	  deplibs=
-	  ;;
+	dlopen) libs="$dlfiles" ;;
 	dlpreopen) libs="$dlprefiles" ;;
 	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
       fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
       for deplib in $libs; do
 	lib=
 	found=no
 	case $deplib in
-	-l*)
-	  if test $linkmode = oldlib && test $linkmode = obj; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
-	    continue
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    compiler_flags="$compiler_flags $deplib"
 	  fi
-	  if test $pass = conv; then
-	    deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
 	    continue
 	  fi
 	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
 	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-	    # Search the libtool library
-	    lib="$searchdir/lib${name}.la"
-	    if test -f "$lib"; then
-	      found=yes
-	      break
-	    fi
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
 	  done
 	  if test "$found" != yes; then
 	    # deplib doesn't seem to be a libtool library
@@ -1407,40 +2046,76 @@ compiler."
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    else
 	      deplibs="$deplib $deplibs"
-	      test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
 	    fi
 	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if (${SED} -e '2q' $lib |
+                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		  library_names=
+		  old_library=
+		  case $lib in
+		  */* | *\\*) . $lib ;;
+		  *) . ./$lib ;;
+		  esac
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+		    test "X$ladir" = "X$lib" && ladir="."
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+	        ;;
+	      *) ;;
+	      esac
+	    fi
 	  fi
 	  ;; # -l
 	-L*)
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
-	    test $pass = conv && continue
+	    test "$pass" = conv && continue
 	    newdependency_libs="$deplib $newdependency_libs"
 	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
 	    ;;
 	  prog)
-	    if test $pass = conv; then
+	    if test "$pass" = conv; then
 	      deplibs="$deplib $deplibs"
 	      continue
 	    fi
-	    if test $pass = scan; then
+	    if test "$pass" = scan; then
 	      deplibs="$deplib $deplibs"
-	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
 	    ;;
 	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
+	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
-	  if test $pass = link; then
+	  if test "$pass" = link; then
 	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
 	    # Make sure the xrpath contains only unique directories.
 	    case "$xrpath " in
@@ -1453,28 +2128,45 @@ compiler."
 	  ;;
 	*.la) lib="$deplib" ;;
 	*.$libext)
-	  if test $pass = conv; then
+	  if test "$pass" = conv; then
 	    deplibs="$deplib $deplibs"
 	    continue
 	  fi
 	  case $linkmode in
 	  lib)
-	    if test "$deplibs_check_method" != pass_all; then
-	      echo
-	      echo "*** Warning: This library needs some functionality provided by $deplib."
-	      echo "*** I have the capability to make that library automatically link in when"
-	      echo "*** you link to this library.  But I can only do this if you have a"
-	      echo "*** shared version of the library, which you do not appear to have."
+	    valid_a_lib=no
+	    case $deplibs_check_method in
+	      match_pattern*)
+		set dummy $deplibs_check_method
+	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+		if eval $echo \"$deplib\" 2>/dev/null \
+		    | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		  valid_a_lib=yes
+		fi
+		;;
+	      pass_all)
+		valid_a_lib=yes
+		;;
+            esac
+	    if test "$valid_a_lib" != yes; then
+	      $echo
+	      $echo "*** Warning: Trying to link with static lib archive $deplib."
+	      $echo "*** I have the capability to make that library automatically link in when"
+	      $echo "*** you link to this library.  But I can only do this if you have a"
+	      $echo "*** shared version of the library, which you do not appear to have"
+	      $echo "*** because the file extensions .$libext of this argument makes me believe"
+	      $echo "*** that it is just a static archive that I should not used here."
 	    else
-	      echo
-	      echo "*** Warning: Linking the shared library $output against the"
-	      echo "*** static library $deplib is not portable!"
+	      $echo
+	      $echo "*** Warning: Linking the shared library $output against the"
+	      $echo "*** static library $deplib is not portable!"
 	      deplibs="$deplib $deplibs"
 	    fi
 	    continue
 	    ;;
 	  prog)
-	    if test $pass != link; then
+	    if test "$pass" != link; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
@@ -1485,14 +2177,18 @@ compiler."
 	  esac # linkmode
 	  ;; # *.$libext
 	*.lo | *.$objext)
-	  if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	    # If there is no dlopen support or we're linking statically,
-	    # we need to preload.
-	    newdlprefiles="$newdlprefiles $deplib"
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    newdlfiles="$newdlfiles $deplib"
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      newdlprefiles="$newdlprefiles $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      newdlfiles="$newdlfiles $deplib"
+	    fi
 	  fi
 	  continue
 	  ;;
@@ -1501,17 +2197,17 @@ compiler."
 	  continue
 	  ;;
 	esac # case $deplib
-	if test $found = yes || test -f "$lib"; then :
+	if test "$found" = yes || test -f "$lib"; then :
 	else
 	  $echo "$modename: cannot find the library \`$lib'" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	# Check to see that this really is a libtool archive.
-	if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
 	else
 	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
@@ -1524,8 +2220,11 @@ compiler."
 	library_names=
 	old_library=
 	# If the library was installed with an old release of libtool,
-	# it will not redefine variable installed.
+	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
 
 	# Read the .la file
 	case $lib in
@@ -1535,19 +2234,18 @@ compiler."
 
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test $linkmode = oldlib && test $linkmode = obj; }; then
-	   # Add dl[pre]opened files of deplib
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
 	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
 	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
 	fi
 
-	if test $pass = conv; then
+	if test "$pass" = conv; then
 	  # Only check for convenience libraries
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
 	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit 1
+	      exit $EXIT_FAILURE
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
@@ -1555,18 +2253,21 @@ compiler."
 	    tmp_libs=
 	    for deplib in $dependency_libs; do
 	      deplibs="$deplib $deplibs"
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
+              if test "X$duplicate_deps" = "Xyes" ; then
+	        case "$tmp_libs " in
+	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	        esac
+              fi
 	      tmp_libs="$tmp_libs $deplib"
 	    done
-	  elif test $linkmode != prog && test $linkmode != lib; then
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
 	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	  continue
 	fi # $pass = conv
 
+
 	# Get the name of the library we link against.
 	linklib=
 	for l in $old_library $library_names; do
@@ -1574,19 +2275,23 @@ compiler."
 	done
 	if test -z "$linklib"; then
 	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	# This library was specified with -dlopen.
-	if test $pass = dlopen; then
+	if test "$pass" = dlopen; then
 	  if test -z "$libdir"; then
 	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
-	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
 	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.
-	    dlprefiles="$dlprefiles $lib"
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    dlprefiles="$dlprefiles $lib $dependency_libs"
 	  else
 	    newdlfiles="$newdlfiles $lib"
 	  fi
@@ -1618,19 +2323,27 @@ compiler."
 	    dir="$libdir"
 	    absdir="$libdir"
 	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
 	else
-	  dir="$ladir/$objdir"
-	  absdir="$abs_ladir/$objdir"
-	  # Remove this search path later
-	  notinst_path="$notinst_path $abs_ladir"
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  fi
 	fi # $installed = yes
 	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
 
 	# This library was specified with -dlpreopen.
-	if test $pass = dlpreopen; then
+	if test "$pass" = dlpreopen; then
 	  if test -z "$libdir"; then
 	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	  # Prefer using a static library (so that no silly _DYNAMIC symbols
 	  # are required to link).
@@ -1646,18 +2359,19 @@ compiler."
 
 	if test -z "$libdir"; then
 	  # Link the convenience library
-	  if test $linkmode = lib; then
+	  if test "$linkmode" = lib; then
 	    deplibs="$dir/$old_library $deplibs"
 	  elif test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$dir/$old_library $compile_deplibs"
 	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
 	  else
-	    deplibs="$lib $deplibs"
+	    deplibs="$lib $deplibs" # used for prog,scan pass
 	  fi
 	  continue
 	fi
 
-	if test $linkmode = prog && test $pass != link; then
+
+	if test "$linkmode" = prog && test "$pass" != link; then
 	  newlib_search_path="$newlib_search_path $ladir"
 	  deplibs="$lib $deplibs"
 
@@ -1673,28 +2387,36 @@ compiler."
 	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
 	    esac
 	    # Need to link against all dependency_libs?
-	    if test $linkalldeplibs = yes; then
+	    if test "$linkalldeplibs" = yes; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      # Need to hardcode shared library paths
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    case "$tmp_libs " in
-	    *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	    esac
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
 	    tmp_libs="$tmp_libs $deplib"
 	  done # for deplib
 	  continue
 	fi # $linkmode = prog...
 
-	link_static=no # Whether the deplib will be linked statically
-	if test -n "$library_names" &&
-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	  # Link against this shared library
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath " in
+	      *" $dir "*) ;;
+	      *" $absdir "*) ;;
+	      *) temp_rpath="$temp_rpath $dir" ;;
+	      esac
+	    fi
 
-	  if test "$linkmode,$pass" = "prog,link" ||
-	   { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	    # search path.
@@ -1716,17 +2438,6 @@ compiler."
 	      esac
 	      ;;
 	    esac
-	    if test $linkmode = prog; then
-	      # We need to hardcode the library path
-	      if test -n "$shlibpath_var"; then
-		# Make sure the rpath contains only unique directories.
-		case "$temp_rpath " in
-		*" $dir "*) ;;
-		*" $absdir "*) ;;
-		*) temp_rpath="$temp_rpath $dir" ;;
-		esac
-	      fi
-	    fi
 	  fi # $linkmode,$pass = prog,link...
 
 	  if test "$alldeplibs" = yes &&
@@ -1736,11 +2447,52 @@ compiler."
 	    # We only need to search for static libraries
 	    continue
 	  fi
+	fi
 
+	link_static=no # Whether the deplib will be linked statically
+	if test -n "$library_names" &&
+	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
 	  if test "$installed" = no; then
 	    notinst_deplibs="$notinst_deplibs $lib"
 	    need_relink=yes
 	  fi
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on
+	  # some systems (darwin)
+	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
+	    $echo
+	    if test "$linkmode" = prog; then
+	      $echo "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $echo "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $echo "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi
 
 	  if test -n "$old_archive_from_expsyms_cmds"; then
 	    # figure out the soname
@@ -1754,7 +2506,7 @@ compiler."
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin*)
+	      *cygwin* | mingw*)
 		major=`expr $current - $age`
 		versuffix="-$major"
 		;;
@@ -1766,17 +2518,18 @@ compiler."
 
 	    # Make a new name for the extract_expsyms_cmds to use
 	    soroot="$soname"
-	    soname=`echo $soroot | sed -e 's/^.*\///'`
-	    newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
+	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
 
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else
 	      $show "extracting exported symbol list from \`$soname'"
 	      save_ifs="$IFS"; IFS='~'
-	      eval cmds=\"$extract_expsyms_cmds\"
+	      cmds=$extract_expsyms_cmds
 	      for cmd in $cmds; do
 		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
 		$show "$cmd"
 		$run eval "$cmd" || exit $?
 	      done
@@ -1787,9 +2540,10 @@ compiler."
 	    if test -f "$output_objdir/$newlib"; then :; else
 	      $show "generating import library for \`$soname'"
 	      save_ifs="$IFS"; IFS='~'
-	      eval cmds=\"$old_archive_from_expsyms_cmds\"
+	      cmds=$old_archive_from_expsyms_cmds
 	      for cmd in $cmds; do
 		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
 		$show "$cmd"
 		$run eval "$cmd" || exit $?
 	      done
@@ -1798,9 +2552,9 @@ compiler."
 	    # make sure the library variables are pointing to the new library
 	    dir=$output_objdir
 	    linklib=$newlib
-	  fi # test -n $old_archive_from_expsyms_cmds
+	  fi # test -n "$old_archive_from_expsyms_cmds"
 
-	  if test $linkmode = prog || test "$mode" != relink; then
+	  if test "$linkmode" = prog || test "$mode" != relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
@@ -1809,6 +2563,22 @@ compiler."
 	    immediate | unsupported)
 	      if test "$hardcode_direct" = no; then
 		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5* ) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a module then we can not link against
+		    # it, someone is ignoring the new warnings I added
+		    if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
+		      $echo "** Warning, lib $linklib is a module, not a shared library"
+		      if test -z "$old_library" ; then
+		        $echo
+		        $echo "** And there doesn't seem to be a static archive available"
+		        $echo "** The link will probably fail, sorry"
+		      else
+		        add="$dir/$old_library"
+		      fi
+		    fi
+		esac
 	      elif test "$hardcode_minus_L" = no; then
 		case $host in
 		*-*-sunos*) add_shlibpath="$dir" ;;
@@ -1827,6 +2597,14 @@ compiler."
 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = yes; then
 		add_dir="-L$dir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case "$libdir" in
+		    [\\/]*)
+		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
 		add="-l$name"
 	      elif test "$hardcode_shlibpath_var" = yes; then
 		add_shlibpath="$dir"
@@ -1840,7 +2618,7 @@ compiler."
 
 	    if test "$lib_linked" != yes; then
 	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit 1
+	      exit $EXIT_FAILURE
 	    fi
 
 	    if test -n "$add_shlibpath"; then
@@ -1849,7 +2627,7 @@ compiler."
 	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
 	      esac
 	    fi
-	    if test $linkmode = prog; then
+	    if test "$linkmode" = prog; then
 	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
 	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
 	    else
@@ -1866,7 +2644,7 @@ compiler."
 	    fi
 	  fi
 
-	  if test $linkmode = prog || test "$mode" = relink; then
+	  if test "$linkmode" = prog || test "$mode" = relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
@@ -1882,13 +2660,28 @@ compiler."
 	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
 	      esac
 	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+	        add="$inst_prefix_dir$libdir/$linklib"
+	      else
+	        add="$libdir/$linklib"
+	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
 	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case "$libdir" in
+		  [\\/]*)
+		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
 	      add="-l$name"
 	    fi
 
-	    if test $linkmode = prog; then
+	    if test "$linkmode" = prog; then
 	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
 	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
 	    else
@@ -1896,16 +2689,7 @@ compiler."
 	      test -n "$add" && deplibs="$add $deplibs"
 	    fi
 	  fi
-	elif test $linkmode = prog; then
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-
-	  # Try to link the static library
+	elif test "$linkmode" = prog; then
 	  # Here we assume that one of hardcode_direct or hardcode_minus_L
 	  # is not unsupported.  This is valid on all known static and
 	  # shared platforms.
@@ -1925,20 +2709,21 @@ compiler."
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
-	    echo
-	    echo "*** Warning: This library needs some functionality provided by $lib."
-	    echo "*** I have the capability to make that library automatically link in when"
-	    echo "*** you link to this library.  But I can only do this if you have a"
-	    echo "*** shared version of the library, which you do not appear to have."
+	    $echo
+	    $echo "*** Warning: This system can not link to static lib archive $lib."
+	    $echo "*** I have the capability to make that library automatically link in when"
+	    $echo "*** you link to this library.  But I can only do this if you have a"
+	    $echo "*** shared version of the library, which you do not appear to have."
 	    if test "$module" = yes; then
-	      echo "*** Therefore, libtool will create a static module, that should work "
-	      echo "*** as long as the dlopening application is linked with the -dlopen flag."
+	      $echo "*** But as you try to build a module library, libtool will still create "
+	      $echo "*** a static module, that should work as long as the dlopening application"
+	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
-		echo
-		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+		$echo
+		$echo "*** However, this would only work if libtool was able to extract symbol"
+		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$echo "*** not find such a program.  So, this module is probably useless."
+		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
@@ -1955,10 +2740,11 @@ compiler."
 	  fi
 	fi # link shared/static library?
 
-	if test $linkmode = lib; then
+	if test "$linkmode" = lib; then
 	  if test -n "$dependency_libs" &&
-	     { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
-	       test $link_static = yes; }; then
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
 	    # Extract -R from dependency_libs
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
@@ -1981,13 +2767,15 @@ compiler."
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    newdependency_libs="$deplib $newdependency_libs"
-	    case "$tmp_libs " in
-	    *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	    esac
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
 	    tmp_libs="$tmp_libs $deplib"
 	  done
 
-	  if test $link_all_deplibs != no; then
+	  if test "$link_all_deplibs" != no; then
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do
 	      case $deplib in
@@ -2007,22 +2795,67 @@ compiler."
 		  ;;
 		esac
 		if grep "^installed=no" $deplib > /dev/null; then
-		  path="-L$absdir/$objdir"
+		  path="$absdir/$objdir"
 		else
-		  eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  if test -z "$libdir"; then
 		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit 1
+		    exit $EXIT_FAILURE
 		  fi
 		  if test "$absdir" != "$libdir"; then
 		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
 		  fi
-		  path="-L$absdir"
+		  path="$absdir"
 		fi
+		depdepl=
+		case $host in
+		*-*-darwin*)
+		  # we do not want to link against static libs,
+		  # but need to link against shared
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$path/$depdepl" ; then
+		      depdepl="$path/$depdepl"
+		    fi
+		    # do not add paths which are already there
+		    case " $newlib_search_path " in
+		    *" $path "*) ;;
+		    *) newlib_search_path="$newlib_search_path $path";;
+		    esac
+		  fi
+		  path=""
+		  ;;
+		*)
+		  path="-L$path"
+		  ;;
+		esac
+		;;
+	      -l*)
+		case $host in
+		*-*-darwin*)
+		  # Again, we only want to link against shared libraries
+		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+		  for tmp in $newlib_search_path ; do
+		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
+		      eval depdepl="$tmp/lib$tmp_libs.dylib"
+		      break
+		    fi
+		  done
+		  path=""
+		  ;;
+		*) continue ;;
+		esac
 		;;
 	      *) continue ;;
 	      esac
 	      case " $deplibs " in
+	      *" $depdepl "*) ;;
+	      *) deplibs="$depdepl $deplibs" ;;
+	      esac
+	      case " $deplibs " in
 	      *" $path "*) ;;
 	      *) deplibs="$deplibs $path" ;;
 	      esac
@@ -2030,15 +2863,15 @@ compiler."
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
       done # for deplib in $libs
-      if test $pass = dlpreopen; then
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
 	# Link the dlpreopened libraries before other libraries
 	for deplib in $save_deplibs; do
 	  deplibs="$deplib $deplibs"
 	done
       fi
-      if test $pass != dlopen; then
-	test $pass != scan && dependency_libs="$newdependency_libs"
-	if test $pass != conv; then
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
 	  # Make sure lib_search_path contains only unique directories.
 	  lib_search_path=
 	  for dir in $newlib_search_path; do
@@ -2060,9 +2893,30 @@ compiler."
 	  eval tmp_libs=\"\$$var\"
 	  new_libs=
 	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
 	    case $deplib in
 	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
 	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
 	      case " $specialdeplibs " in
 	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
 	      *)
@@ -2090,19 +2944,32 @@ compiler."
 	  eval $var=\"$tmp_libs\"
 	done # for var
       fi
-      if test "$pass" = "conv" &&
-       { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
-	libs="$deplibs" # reset libs
-	deplibs=
-      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  tmp_libs="$tmp_libs $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
     done # for pass
-    if test $linkmode = prog; then
+    if test "$linkmode" = prog; then
       dlfiles="$newdlfiles"
       dlprefiles="$newdlprefiles"
     fi
 
     case $linkmode in
     oldlib)
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
       fi
@@ -2116,7 +2983,7 @@ compiler."
       fi
 
       if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
       fi
 
       if test -n "$release"; then
@@ -2138,17 +3005,19 @@ compiler."
       case $outputname in
       lib*)
 	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval shared_ext=\"$shrext_cmds\"
 	eval libname=\"$libname_spec\"
 	;;
       *)
 	if test "$module" = no; then
 	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required
 	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval shared_ext=\"$shrext_cmds\"
 	  eval libname=\"$libname_spec\"
 	else
 	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
@@ -2159,11 +3028,11 @@ compiler."
       if test -n "$objs"; then
 	if test "$deplibs_check_method" != pass_all; then
 	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit 1
+	  exit $EXIT_FAILURE
 	else
-	  echo
-	  echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  echo "*** objects $objs is not portable!"
+	  $echo
+	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
+	  $echo "*** objects $objs is not portable!"
 	  libobjs="$libobjs $objs"
 	fi
       fi
@@ -2173,7 +3042,7 @@ compiler."
       fi
 
       set dummy $rpath
-      if test $# -gt 2; then
+      if test "$#" -gt 2; then
 	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
       fi
       install_libdir="$2"
@@ -2182,14 +3051,16 @@ compiler."
       if test -z "$rpath"; then
 	if test "$build_libtool_libs" = yes; then
 	  # Building a libtool convenience library.
-	  libext=al
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
 	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
 	  build_libtool_libs=convenience
 	  build_old_libs=yes
 	fi
 
 	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
 	fi
 
 	if test -n "$release"; then
@@ -2205,45 +3076,82 @@ compiler."
 	if test -n "$8"; then
 	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
-	current="$2"
-	revision="$3"
-	age="$4"
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$2"
+	  number_minor="$3"
+	  number_revision="$4"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  darwin|linux|osf|windows)
+	    current=`expr $number_major + $number_minor`
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    current=`expr $number_major + $number_minor - 1`
+	    age="$number_minor"
+	    revision="$number_minor"
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$2"
+	  revision="$3"
+	  age="$4"
+	  ;;
+	esac
 
 	# Check that each of the things are valid numbers.
 	case $current in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
 	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
 	case $revision in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
 	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
 	case $age in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
 	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
-	if test $age -gt $current; then
+	if test "$age" -gt "$current"; then
 	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	# Calculate the version variables.
@@ -2260,7 +3168,7 @@ compiler."
 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...
 	  minor_current=`expr $current + 1`
-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
 	  ;;
 
 	freebsd-aout)
@@ -2273,16 +3181,21 @@ compiler."
 	  versuffix=".$current";
 	  ;;
 
-	irix)
+	irix | nonstopux)
 	  major=`expr $current - $age + 1`
-	  verstring="sgi$major.$revision"
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
-	  while test $loop != 0; do
+	  while test "$loop" -ne 0; do
 	    iface=`expr $revision - $loop`
 	    loop=`expr $loop - 1`
-	    verstring="sgi$major.$iface:$verstring"
+	    verstring="$verstring_prefix$major.$iface:$verstring"
 	  done
 
 	  # Before this point, $major must not contain `.'.
@@ -2296,13 +3209,13 @@ compiler."
 	  ;;
 
 	osf)
-	  major=`expr $current - $age`
+	  major=.`expr $current - $age`
 	  versuffix=".$current.$age.$revision"
 	  verstring="$current.$age.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
-	  while test $loop != 0; do
+	  while test "$loop" -ne 0; do
 	    iface=`expr $current - $loop`
 	    loop=`expr $loop - 1`
 	    verstring="$verstring:${iface}.0"
@@ -2326,20 +3239,19 @@ compiler."
 
 	*)
 	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit 1
+	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
 	# Clear the version info if we defaulted, and they specified a release.
 	if test -z "$vinfo" && test -n "$release"; then
 	  major=
-	  verstring="0.0"
 	  case $version_type in
 	  darwin)
 	    # we can't check for "0.0" in archive_cmds due to quoting
 	    # problems, so we reset it completely
-	    verstring=""
+	    verstring=
 	    ;;
 	  *)
 	    verstring="0.0"
@@ -2373,9 +3285,30 @@ compiler."
       fi
 
       if test "$mode" != relink; then
-	# Remove our outputs.
-	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
-	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$echo "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+	         then
+		   continue
+		 fi
+	       fi
+	       removelist="$removelist $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	if test -n "$removelist"; then
+	  $show "${rm}r $removelist"
+	  $run ${rm}r $removelist
+	fi
       fi
 
       # Now set the variables for building old libraries.
@@ -2388,9 +3321,9 @@ compiler."
 
       # Eliminate all temporary directories.
       for path in $notinst_path; do
-	lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
-	deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
-	dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
+	lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
+	deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
+	dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
       done
 
       if test -n "$xrpath"; then
@@ -2403,7 +3336,7 @@ compiler."
 	  *) finalize_rpath="$finalize_rpath $libdir" ;;
 	  esac
 	done
-	if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
 	  dependency_libs="$temp_xrpath $dependency_libs"
 	fi
       fi
@@ -2441,12 +3374,13 @@ compiler."
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
 	    ;;
-	  *-*-openbsd*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
 	    ;;
-	  *)
+ 	  *)
 	    # Add libc to deplibs on all other systems if necessary.
-	    if test $build_libtool_need_lc = "yes"; then
+	    if test "$build_libtool_need_lc" = "yes"; then
 	      deplibs="$deplibs -lc"
 	    fi
 	    ;;
@@ -2473,7 +3407,7 @@ compiler."
 	  # This might be a little naive.  We might want to check
 	  # whether the library exists or not.  But this is on
 	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behaviour.
+	  # implementing what was already the behavior.
 	  newdeplibs=$deplibs
 	  ;;
 	test_compile)
@@ -2486,64 +3420,88 @@ compiler."
 	  int main() { return 0; }
 EOF
 	  $rm conftest
-	  $CC -o conftest conftest.c $deplibs
-	  if test $? -eq 0 ; then
+	  $LTCC -o conftest conftest.c $deplibs
+	  if test "$?" -eq 0 ; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
 	      name="`expr $i : '-l\(.*\)'`"
 	      # If $name is empty we are operating on a -L argument.
-	      if test -n "$name" && test "$name" != "0"; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		set dummy $deplib_matches
-		deplib_match=$2
-		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		  newdeplibs="$newdeplibs $i"
-		else
-		  droppeddeps=yes
-		  echo
-		  echo "*** Warning: This library needs some functionality provided by $i."
-		  echo "*** I have the capability to make that library automatically link in when"
-		  echo "*** you link to this library.  But I can only do this if you have a"
-		  echo "*** shared version of the library, which you do not appear to have."
+              if test "$name" != "" && test "$name" -ne "0"; then
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    newdeplibs="$newdeplibs $i"
+		    i=""
+		    ;;
+		  esac
+	        fi
+		if test -n "$i" ; then
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    $echo
+		    $echo "*** Warning: dynamic linker does not accept needed library $i."
+		    $echo "*** I have the capability to make that library automatically link in when"
+		    $echo "*** you link to this library.  But I can only do this if you have a"
+		    $echo "*** shared version of the library, which I believe you do not have"
+		    $echo "*** because a test_compile did reveal that the linker did not use it for"
+		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
 		fi
 	      else
 		newdeplibs="$newdeplibs $i"
 	      fi
 	    done
 	  else
-	    # Error occured in the first compile.  Let's try to salvage the situation:
-	    # Compile a seperate program for each library.
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do
 	      name="`expr $i : '-l\(.*\)'`"
-	     # If $name is empty we are operating on a -L argument.
-	      if test -n "$name" && test "$name" != "0"; then
+	      # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" != "0"; then
 		$rm conftest
-		$CC -o conftest conftest.c $i
+		$LTCC -o conftest conftest.c $i
 		# Did it work?
-		if test $? -eq 0 ; then
+		if test "$?" -eq 0 ; then
 		  ldd_output=`ldd conftest`
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    echo
-		    echo "*** Warning: This library needs some functionality provided by $i."
-		    echo "*** I have the capability to make that library automatically link in when"
-		    echo "*** you link to this library.  But I can only do this if you have a"
-		    echo "*** shared version of the library, which you do not appear to have."
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      newdeplibs="$newdeplibs $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval \\$echo \"$libname_spec\"`
+		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		    set dummy $deplib_matches
+		    deplib_match=$2
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      newdeplibs="$newdeplibs $i"
+		    else
+		      droppeddeps=yes
+		      $echo
+		      $echo "*** Warning: dynamic linker does not accept needed library $i."
+		      $echo "*** I have the capability to make that library automatically link in when"
+		      $echo "*** you link to this library.  But I can only do this if you have a"
+		      $echo "*** shared version of the library, which you do not appear to have"
+		      $echo "*** because a test_compile did reveal that the linker did not use this one"
+		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  echo
-		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  echo "***  make it link in!  You will probably need to install it or some"
-		  echo "*** library that it depends on before this library will be fully"
-		  echo "*** functional.  Installing it before continuing would be even better."
+		  $echo
+		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  $echo "***  make it link in!  You will probably need to install it or some"
+		  $echo "*** library that it depends on before this library will be fully"
+		  $echo "*** functional.  Installing it before continuing would be even better."
 		fi
 	      else
 		newdeplibs="$newdeplibs $i"
@@ -2557,11 +3515,20 @@ EOF
 	  for a_deplib in $deplibs; do
 	    name="`expr $a_deplib : '-l\(.*\)'`"
 	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
-	      libname=`eval \\$echo \"$libname_spec\"`
-	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		    for potent_lib in $potential_libs; do
+            if test "$name" != "" && test  "$name" != "0"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
 		      # Follow soft links.
 		      if ls -lLd "$potent_lib" 2>/dev/null \
 			 | grep " -> " >/dev/null; then
@@ -2574,28 +3541,36 @@ EOF
 		      # but so what?
 		      potlib="$potent_lib"
 		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
 			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | sed 10q \
-			 | egrep "$file_magic_regex" > /dev/null; then
+			 | ${SED} 10q \
+			 | $EGREP "$file_magic_regex" > /dev/null; then
 			newdeplibs="$newdeplibs $a_deplib"
 			a_deplib=""
 			break 2
 		      fi
-		    done
-	      done
+		  done
+		done
+	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		echo
-		echo "*** Warning: This library needs some functionality provided by $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have."
+		$echo
+		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$echo "*** I have the capability to make that library automatically link in when"
+		$echo "*** you link to this library.  But I can only do this if you have a"
+		$echo "*** shared version of the library, which you do not appear to have"
+		$echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $echo "*** using a file magic. Last file checked: $potlib"
+		fi
 	      fi
 	    else
 	      # Add a -L argument.
@@ -2610,26 +3585,44 @@ EOF
 	    name="`expr $a_deplib : '-l\(.*\)'`"
 	    # If $name is empty we are operating on a -L argument.
 	    if test -n "$name" && test "$name" != "0"; then
-	      libname=`eval \\$echo \"$libname_spec\"`
-	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		for potent_lib in $potential_libs; do
-		  if eval echo \"$potent_lib\" 2>/dev/null \
-		      | sed 10q \
-		      | egrep "$match_pattern_regex" > /dev/null; then
-		    newdeplibs="$newdeplibs $a_deplib"
-		    a_deplib=""
-		    break 2
-		  fi
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval $echo \"$potent_lib\" 2>/dev/null \
+		        | ${SED} 10q \
+		        | $EGREP "$match_pattern_regex" > /dev/null; then
+		      newdeplibs="$newdeplibs $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
 		done
-	      done
+	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		echo
-		echo "*** Warning: This library needs some functionality provided by $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have."
+		$echo
+		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$echo "*** I have the capability to make that library automatically link in when"
+		$echo "*** you link to this library.  But I can only do this if you have a"
+		$echo "*** shared version of the library, which you do not appear to have"
+		$echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $echo "*** using a regex pattern. Last file checked: $potlib"
+		fi
 	      fi
 	    else
 	      # Add a -L argument.
@@ -2639,16 +3632,23 @@ EOF
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
-	     grep . >/dev/null; then
-	    echo
+	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	    -e 's/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+	    done
+	  fi
+	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
+	    | grep . >/dev/null; then
+	    $echo
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	      $echo "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    echo "*** All declared inter-library dependencies are being dropped."
+	    $echo "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
 	  fi
 	  ;;
@@ -2668,17 +3668,17 @@ EOF
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    echo
-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    echo "*** a static module, that should work as long as the dlopening"
-	    echo "*** application is linked with the -dlopen flag."
+	    $echo
+	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    $echo "*** a static module, that should work as long as the dlopening"
+	    $echo "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      echo
-	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      $echo
+	      $echo "*** However, this would only work if libtool was able to extract symbol"
+	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $echo "*** not find such a program.  So, this module is probably useless."
+	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
@@ -2688,16 +3688,16 @@ EOF
 	      build_libtool_libs=no
 	    fi
 	  else
-	    echo "*** The inter-library dependencies that have been dropped here will be"
-	    echo "*** automatically added whenever a program is linked with this library"
-	    echo "*** or is declared to -dlopen it."
-
-	    if test $allow_undefined = no; then
-	      echo
-	      echo "*** Since this library must not contain undefined symbols,"
-	      echo "*** because either the platform does not support them or"
-	      echo "*** it was explicitly requested with -no-undefined,"
-	      echo "*** libtool will only create a static version of it."
+	    $echo "*** The inter-library dependencies that have been dropped here will be"
+	    $echo "*** automatically added whenever a program is linked with this library"
+	    $echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      $echo
+	      $echo "*** Since this library must not contain undefined symbols,"
+	      $echo "*** because either the platform does not support them or"
+	      $echo "*** it was explicitly requested with -no-undefined,"
+	      $echo "*** libtool will only create a static version of it."
 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
@@ -2719,7 +3719,7 @@ EOF
 
       # Test again, we may have decided not to build it any more
       if test "$build_libtool_libs" = yes; then
-	if test $hardcode_into_libs = yes; then
+	if test "$hardcode_into_libs" = yes; then
 	  # Hardcode the library paths
 	  hardcode_libdirs=
 	  dep_rpath=
@@ -2755,7 +3755,11 @@ EOF
 	  if test -n "$hardcode_libdir_separator" &&
 	     test -n "$hardcode_libdirs"; then
 	    libdir="$hardcode_libdirs"
-	    eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+	    if test -n "$hardcode_libdir_flag_spec_ld"; then
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+	    else
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+	    fi
 	  fi
 	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
 	    # We should set the runpath_var.
@@ -2775,6 +3779,7 @@ EOF
 	fi
 
 	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
 	realname="$2"
@@ -2785,7 +3790,9 @@ EOF
 	else
 	  soname="$realname"
 	fi
-	test -z "$dlname" && dlname=$soname
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
 
 	lib="$output_objdir/$realname"
 	for link
@@ -2793,23 +3800,6 @@ EOF
 	  linknames="$linknames $link"
 	done
 
-	# Ensure that we have .o objects for linkers which dislike .lo
-	# (e.g. aix) in case we are running --disable-static
-	for obj in $libobjs; do
-	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$obj"; then
-	    xdir="."
-	  else
-	    xdir="$xdir"
-	  fi
-	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-	  if test ! -f $xdir/$oldobj; then
-	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
-	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
-	  fi
-	done
-
 	# Use standard objects if they are pic
 	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 
@@ -2819,17 +3809,26 @@ EOF
 	    $show "generating symbol list for \`$libname.la'"
 	    export_symbols="$output_objdir/$libname.exp"
 	    $run $rm $export_symbols
-	    eval cmds=\"$export_symbols_cmds\"
+	    cmds=$export_symbols_cmds
 	    save_ifs="$IFS"; IFS='~'
 	    for cmd in $cmds; do
 	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd" || exit $?
+	      eval cmd=\"$cmd\"
+	      if len=`expr "X$cmd" : ".*"` &&
+	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	        $show "$cmd"
+	        $run eval "$cmd" || exit $?
+	        skipped_export=false
+	      else
+	        # The command line is too long to execute in one step.
+	        $show "using reloadable object file for export list..."
+	        skipped_export=:
+	      fi
 	    done
 	    IFS="$save_ifs"
 	    if test -n "$export_symbols_regex"; then
-	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
 	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
 	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
 	    fi
@@ -2840,46 +3839,30 @@ EOF
 	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
 	fi
 
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+		case " $convenience " in
+		*" $test_deplib "*) ;;
+		*)
+			tmp_deplibs="$tmp_deplibs $test_deplib"
+			;;
+		esac
+	done
+	deplibs="$tmp_deplibs"
+
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	  else
 	    gentop="$output_objdir/${outputname}x"
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "mkdir $gentop"
-	    $run mkdir "$gentop"
-	    status=$?
-	    if test $status -ne 0 && test ! -d "$gentop"; then
-	      exit $status
-	    fi
 	    generated="$generated $gentop"
 
-	    for xlib in $convenience; do
-	      # Extract the objects.
-	      case $xlib in
-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	      *) xabs=`pwd`"/$xlib" ;;
-	      esac
-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	      xdir="$gentop/$xlib"
-
-	      $show "${rm}r $xdir"
-	      $run ${rm}r "$xdir"
-	      $show "mkdir $xdir"
-	      $run mkdir "$xdir"
-	      status=$?
-	      if test $status -ne 0 && test ! -d "$xdir"; then
-		exit $status
-	      fi
-	      $show "(cd $xdir && $AR x $xabs)"
-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-	    done
+	    func_extract_archives $gentop $convenience
+	    libobjs="$libobjs $func_extract_archives_result"
 	  fi
 	fi
-
+	
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  linker_flags="$linker_flags $flag"
@@ -2891,14 +3874,148 @@ EOF
 	fi
 
 	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
 	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval cmds=\"$archive_expsym_cmds\"
+	  eval test_cmds=\"$archive_expsym_cmds\"
+	  cmds=$archive_expsym_cmds
 	else
-	  eval cmds=\"$archive_cmds\"
+	  eval test_cmds=\"$archive_cmds\"
+	  cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
+	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise.
+	  $echo "creating reloadable object files..."
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  delfiles=
+	  last_robj=
+	  k=1
+	  output=$output_objdir/$output_la-${k}.$objext
+	  # Loop over the list of objects to be linked.
+	  for obj in $save_libobjs
+	  do
+	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+	    if test "X$objlist" = X ||
+	       { len=`expr "X$test_cmds" : ".*"` &&
+		 test "$len" -le "$max_cmd_len"; }; then
+	      objlist="$objlist $obj"
+	    else
+	      # The command $test_cmds is almost too long, add a
+	      # command to the queue.
+	      if test "$k" -eq 1 ; then
+		# The first file doesn't have a previous command to add.
+		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+	      else
+		# All subsequent reloadable object files will link in
+		# the last one created.
+		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+	      fi
+	      last_robj=$output_objdir/$output_la-${k}.$objext
+	      k=`expr $k + 1`
+	      output=$output_objdir/$output_la-${k}.$objext
+	      objlist=$obj
+	      len=1
+	    fi
+	  done
+	  # Handle the remaining objects by creating one last
+	  # reloadable object file.  All subsequent reloadable object
+	  # files will link in the last one created.
+	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+	  if ${skipped_export-false}; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    libobjs=$output
+	    # Append the command to create the export file.
+	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+          fi
+
+	  # Set up a command to remove the reloadable object files
+	  # after they are used.
+	  i=0
+	  while test "$i" -lt "$k"
+	  do
+	    i=`expr $i + 1`
+	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+	  done
+
+	  $echo "creating a temporary reloadable object file: $output"
+
+	  # Loop through the commands generated above and execute them.
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $concat_cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    cmds=$archive_expsym_cmds
+	  else
+	    cmds=$archive_cmds
+	    fi
+	  fi
+
+	  # Append the command to remove the reloadable object files
+	  # to the just-reset $cmds.
+	  eval cmds=\"\$cmds~\$rm $delfiles\"
 	fi
 	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
 	  $show "$cmd"
 	  $run eval "$cmd" || exit $?
 	done
@@ -2907,7 +4024,7 @@ EOF
 	# Restore the uninstalled library and exit
 	if test "$mode" = relink; then
 	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-	  exit 0
+	  exit $EXIT_SUCCESS
 	fi
 
 	# Create links to the real library.
@@ -2955,7 +4072,7 @@ EOF
       *.lo)
 	if test -n "$objs$old_deplibs"; then
 	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 	libobj="$output"
 	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
@@ -2984,38 +4101,10 @@ EOF
 	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
 	else
 	  gentop="$output_objdir/${obj}x"
-	  $show "${rm}r $gentop"
-	  $run ${rm}r "$gentop"
-	  $show "mkdir $gentop"
-	  $run mkdir "$gentop"
-	  status=$?
-	  if test $status -ne 0 && test ! -d "$gentop"; then
-	    exit $status
-	  fi
 	  generated="$generated $gentop"
 
-	  for xlib in $convenience; do
-	    # Extract the objects.
-	    case $xlib in
-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	    *) xabs=`pwd`"/$xlib" ;;
-	    esac
-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	    xdir="$gentop/$xlib"
-
-	    $show "${rm}r $xdir"
-	    $run ${rm}r "$xdir"
-	    $show "mkdir $xdir"
-	    $run mkdir "$xdir"
-	    status=$?
-	    if test $status -ne 0 && test ! -d "$xdir"; then
-	      exit $status
-	    fi
-	    $show "(cd $xdir && $AR x $xabs)"
-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-	  done
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
 	fi
       fi
 
@@ -3023,10 +4112,11 @@ EOF
       reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
-      eval cmds=\"$reload_cmds\"
+      cmds=$reload_cmds
       save_ifs="$IFS"; IFS='~'
       for cmd in $cmds; do
 	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
 	$show "$cmd"
 	$run eval "$cmd" || exit $?
       done
@@ -3039,7 +4129,7 @@ EOF
 	  $run ${rm}r $gentop
 	fi
 
-	exit 0
+	exit $EXIT_SUCCESS
       fi
 
       if test "$build_libtool_libs" != yes; then
@@ -3050,37 +4140,24 @@ EOF
 
 	# Create an invalid libtool object if no PIC, so that we don't
 	# accidentally link it into a program.
-	$show "echo timestamp > $libobj"
-	$run eval "echo timestamp > $libobj" || exit $?
-	exit 0
+	# $show "echo timestamp > $libobj"
+	# $run eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
       fi
 
       if test -n "$pic_flag" || test "$pic_mode" != default; then
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
 	output="$libobj"
-	eval cmds=\"$reload_cmds\"
+	cmds=$reload_cmds
 	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
 	  $show "$cmd"
 	  $run eval "$cmd" || exit $?
 	done
 	IFS="$save_ifs"
-      else
-	# Just create a symlink.
-	$show $rm $libobj
-	$run $rm $libobj
-	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$xdir" = "X$libobj"; then
-	  xdir="."
-	else
-	  xdir="$xdir"
-	fi
-	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
-	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
       fi
 
       if test -n "$gentop"; then
@@ -3088,12 +4165,12 @@ EOF
 	$run ${rm}r $gentop
       fi
 
-      exit 0
+      exit $EXIT_SUCCESS
       ;;
 
     prog)
       case $host in
-	*cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
+	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
       esac
       if test -n "$vinfo"; then
 	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
@@ -3118,6 +4195,16 @@ EOF
 	;;
       esac
 
+      case $host in
+      *darwin*)
+        # Don't allow lazy linking, it breaks C++ global constructors
+        if test "$tagname" = CXX ; then
+        compile_command="$compile_command ${wl}-bind_at_load"
+        finalize_command="$finalize_command ${wl}-bind_at_load"
+        fi
+        ;;
+      esac
+
       compile_command="$compile_command $compile_deplibs"
       finalize_command="$finalize_command $finalize_deplibs"
 
@@ -3216,18 +4303,19 @@ EOF
       # can't handle long -Wl flags being sent to the linker during a
       # "recompile" just before execution. -BW 08. April 2002
       case "$host" in
-      *irix[56]*)
+      *jirix[56]*)
         # Add in paths just for the HDF5 library stuff...
         pwd=`pwd`;
-        rpath="${wl}-rpath ${wl}$pwd/.libs:$pwd/../src/.libs:$pwd/../../src/.libs:$pwd/../test/.libs:$pwd/../../../src/.libs$rpath";
+        rpath="${wl}-rpath ${wl}$pwd/.libs:$pwd/../src/.libs:$pwd/../../src/.libs:$pw
+d/../test/.libs:$pwd/../../../src/.libs$rpath";
 
         # Modify the rpaths so that the compiler can handle the number
         # of library paths
         finalize_rpath=`echo $rpath | sed -e "s#:# ${wl}-rpath ${wl}#g"`;
         compile_rpath=`echo $rpath | sed -e "s#:# ${wl}-rpath ${wl}#g"`;
-	# Add a space before each path
-	finalize_rpath=" $finalize_rpath"
-	compile_rpath=" $compile_rpath"
+        # Add a space before each path
+        finalize_rpath=" $finalize_rpath"
+        compile_rpath=" $compile_rpath"
         ;;
       *)
         finalize_rpath="$rpath";
@@ -3294,31 +4382,31 @@ extern \"C\" {
 	    done
 
 	    if test -n "$exclude_expsyms"; then
-	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
 	      $run eval '$mv "$nlist"T "$nlist"'
 	    fi
 
 	    if test -n "$export_symbols_regex"; then
-	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
 	      $run eval '$mv "$nlist"T "$nlist"'
 	    fi
 
 	    # Prepare the list of exported symbols
 	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$output.exp"
+	      export_symbols="$output_objdir/$outputname.exp"
 	      $run $rm $export_symbols
-	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
 	    else
-	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      $run eval 'mv "$nlist"T "$nlist"'
 	    fi
 	  fi
 
 	  for arg in $dlprefiles; do
 	    $show "extracting global C symbols from \`$arg'"
-	    name=`echo "$arg" | sed -e 's%^.*/%%'`
-	    $run eval 'echo ": $name " >> "$nlist"'
+	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
+	    $run eval '$echo ": $name " >> "$nlist"'
 	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
 	  done
 
@@ -3327,12 +4415,18 @@ extern \"C\" {
 	    test -f "$nlist" || : > "$nlist"
 
 	    if test -n "$exclude_expsyms"; then
-	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
 	      $mv "$nlist"T "$nlist"
 	    fi
 
 	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+	    if grep -v "^: " < "$nlist" |
+		if sort -k 3 </dev/null >/dev/null 2>&1; then
+		  sort -k 3
+		else
+		  sort +2
+		fi |
+		uniq > "$nlist"S; then
 	      :
 	    else
 	      grep -v "^: " < "$nlist" > "$nlist"S
@@ -3341,7 +4435,7 @@ extern \"C\" {
 	    if test -f "$nlist"S; then
 	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
 	    else
-	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
 	    fi
 
 	    $echo >> "$output_objdir/$dlsyms" "\
@@ -3356,7 +4450,26 @@ extern \"C\" {
 #endif
 
 /* The mapping between symbol names and symbols. */
+"
+
+	    case $host in
+	    *cygwin* | *mingw* )
+	  $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs */
+struct {
+"
+	      ;;
+	    * )
+	  $echo >> "$output_objdir/$dlsyms" "\
 const struct {
+"
+	      ;;
+	    esac
+
+
+	  $echo >> "$output_objdir/$dlsyms" "\
   const char *name;
   lt_ptr address;
 }
@@ -3393,18 +4506,18 @@ static const void *lt_preloaded_setup() {
 	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
 	    case "$compile_command " in
 	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
 	    esac;;
 	  *-*-hpux*)
 	    case "$compile_command " in
 	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
+	    *) pic_flag_for_symtable=" $pic_flag";;
 	    esac
 	  esac
 
 	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+	  $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
 
 	  # Clean up the generated files.
 	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
@@ -3416,7 +4529,7 @@ static const void *lt_preloaded_setup() {
 	  ;;
 	*)
 	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
       else
@@ -3429,7 +4542,7 @@ static const void *lt_preloaded_setup() {
 	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
       fi
 
-      if test $need_relink = no || test "$build_libtool_libs" != yes; then
+      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
 	# Replace the output file specification.
 	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	link_command="$compile_command$compile_rpath"
@@ -3504,7 +4617,7 @@ static const void *lt_preloaded_setup() {
 	# Link the executable and exit
 	$show "$link_command"
 	$run eval "$link_command" || exit $?
-	exit 0
+	exit $EXIT_SUCCESS
       fi
 
       if test "$hardcode_action" = relink; then
@@ -3554,15 +4667,15 @@ static const void *lt_preloaded_setup() {
 	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
 	  fi
 	done
-	relink_command="cd `pwd`; $relink_command"
+	relink_command="(cd `pwd`; $relink_command)"
 	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       fi
 
       # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-	case $0 in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+	case $progpath in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
 	esac
 	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
       else
@@ -3574,15 +4687,230 @@ static const void *lt_preloaded_setup() {
 	# win32 will think the script is a binary if it has
 	# a .exe suffix, so we strip it off here.
 	case $output in
-	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
 	esac
 	# test for cygwin because mv fails w/o .exe extensions
 	case $host in
-	  *cygwin*) exeext=.exe ;;
+	  *cygwin*)
+	    exeext=.exe
+	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
 	  *) exeext= ;;
 	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
+	    cwrapper=`$echo ${output}.exe`
+	    $rm $cwrappersource $cwrapper
+	    trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    cat > $cwrappersource <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "/bin/sh $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+	    cat >> $cwrappersource<<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef DIR_SEPARATOR
+#define DIR_SEPARATOR '/'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+#define HAVE_DOS_BASED_FILE_SYSTEM
+#ifndef DIR_SEPARATOR_2
+#define DIR_SEPARATOR_2 '\\'
+#endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+const char *program_name = NULL;
+
+void * xmalloc (size_t num);
+char * xstrdup (const char *string);
+char * basename (const char *name);
+char * fnqualify(const char *path);
+char * strendzap(char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int i;
+
+  program_name = (char *) xstrdup ((char *) basename (argv[0]));
+  newargz = XMALLOC(char *, argc+2);
+EOF
+
+	    cat >> $cwrappersource <<EOF
+  newargz[0] = "$SHELL";
+EOF
+
+	    cat >> $cwrappersource <<"EOF"
+  newargz[1] = fnqualify(argv[0]);
+  /* we know the script has the same name, without the .exe */
+  /* so make sure newargz[1] doesn't end in .exe */
+  strendzap(newargz[1],".exe");
+  for (i = 1; i < argc; i++)
+    newargz[i+1] = xstrdup(argv[i]);
+  newargz[argc+1] = NULL;
+EOF
+
+	    cat >> $cwrappersource <<EOF
+  execv("$SHELL",newargz);
+EOF
+
+	    cat >> $cwrappersource <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void * p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+;
+}
+
+char *
+basename (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha (name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return (char *) base;
+}
+
+char *
+fnqualify(const char *path)
+{
+  size_t size;
+  char *p;
+  char tmp[LT_PATHMAX + 1];
+
+  assert(path != NULL);
+
+  /* Is it qualified already? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha (path[0]) && path[1] == ':')
+    return xstrdup (path);
+#endif
+  if (IS_DIR_SEPARATOR (path[0]))
+    return xstrdup (path);
+
+  /* prepend the current directory */
+  /* doesn't handle '~' */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
+  p = XMALLOC(char, size);
+  sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
+  return p;
+}
+
+char *
+strendzap(char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert(str != NULL);
+  assert(pat != NULL);
+
+  len = strlen(str);
+  patlen = strlen(pat);
+
+  if (patlen <= len)
+  {
+    str += len - patlen;
+    if (strcmp(str, pat) == 0)
+      *str = '\0';
+  }
+  return str;
+}
+
+static void
+lt_error_core (int exit_status, const char * mode,
+          const char * message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+EOF
+	  # we should really use a build-platform specific compiler
+	  # here, but OTOH, the wrappers (shell script and this C one)
+	  # are only useful if you want to execute the "real" binary.
+	  # Since the "real" binary is built for $host, then this
+	  # wrapper might as well be built for $host, too.
+	  $run $LTCC -s -o $cwrapper $cwrappersource
+	  ;;
+	esac
 	$rm $output
-	trap "$rm $output; exit 1" 1 2 15
+	trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
 
 	$echo > $output "\
 #! $SHELL
@@ -3598,12 +4926,12 @@ static const void *lt_preloaded_setup() {
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
+Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 relink_command=\"$relink_command\"
 
@@ -3636,7 +4964,7 @@ else
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
     destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
@@ -3649,7 +4977,7 @@ else
     fi
 
     file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
   done
 
   # Try to get the absolute directory name.
@@ -3658,12 +4986,12 @@ else
 "
 
 	if test "$fast_install" = yes; then
-	  echo >> $output "\
+	  $echo >> $output "\
   program=lt-'$outputname'$exeext
   progdir=\"\$thisdir/$objdir\"
 
   if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
     file=\"\$\$-\$program\"
@@ -3674,7 +5002,7 @@ else
       $rm \"\$progdir/\$file\"
     fi"
 
-	  echo >> $output "\
+	  $echo >> $output "\
 
     # relink executable if necessary
     if test -n \"\$relink_command\"; then
@@ -3682,7 +5010,7 @@ else
       else
 	$echo \"\$relink_command_output\" >&2
 	$rm \"\$progdir/\$file\"
-	exit 1
+	exit $EXIT_FAILURE
       fi
     fi
 
@@ -3692,13 +5020,13 @@ else
     $rm \"\$progdir/\$file\"
   fi"
 	else
-	  echo >> $output "\
+	  $echo >> $output "\
   program='$outputname'
   progdir=\"\$thisdir/$objdir\"
 "
 	fi
 
-	echo >> $output "\
+	$echo >> $output "\
 
   if test -f \"\$progdir/\$program\"; then"
 
@@ -3709,7 +5037,8 @@ else
     ###################################################################
     # HACK: This hack has been in HDF5's ltmain.sh file from since I
     # started messing with the Makefile/configure system. I'm loathe to
-    # remove it because it seems to work for us.
+    # remove it because it seems to work for us.  -BW 2002
+    # Ditto. -JL 2005
     #
     ##$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
     $shlibpath_var=\"$finalize_shlibpath$temp_rpath\$$shlibpath_var\"
@@ -3739,14 +5068,6 @@ else
       # Run the actual program with our arguments.
 "
 	case $host in
-	# win32 systems need to use the prog path for dll
-	# lookup to work
-	*-*-cygwin* | *-*-pw32*)
-	  $echo >> $output "\
-      exec \$progdir/\$program \${1+\"\$@\"}
-"
-	  ;;
-
 	# Backslashes separate directories on plain windows
 	*-*-mingw | *-*-os2*)
 	  $echo >> $output "\
@@ -3756,30 +5077,26 @@ else
 
 	*)
 	  $echo >> $output "\
-      # Export the path to the program.
-      PATH=\"\$progdir:\$PATH\"
-      export PATH
-
-      exec \$program \${1+\"\$@\"}
+      exec \$progdir/\$program \${1+\"\$@\"}
 "
 	  ;;
 	esac
 	$echo >> $output "\
       \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit 1
+      exit $EXIT_FAILURE
     fi
   else
     # The program doesn't exist.
     \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
     \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
+    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit $EXIT_FAILURE
   fi
 fi\
 "
 	chmod +x $output
       fi
-      exit 0
+      exit $EXIT_SUCCESS
       ;;
     esac
 
@@ -3795,74 +5112,86 @@ fi\
 	  oldobjs="$libobjs_save"
 	  build_libtool_libs=no
 	else
-	  oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+	  oldobjs="$old_deplibs $non_pic_objects"
 	fi
 	addlibs="$old_convenience"
       fi
 
       if test -n "$addlibs"; then
 	gentop="$output_objdir/${outputname}x"
-	$show "${rm}r $gentop"
-	$run ${rm}r "$gentop"
-	$show "mkdir $gentop"
-	$run mkdir "$gentop"
-	status=$?
-	if test $status -ne 0 && test ! -d "$gentop"; then
-	  exit $status
-	fi
 	generated="$generated $gentop"
 
-	# Add in members from convenience archives.
-	for xlib in $addlibs; do
-	  # Extract the objects.
-	  case $xlib in
-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	  *) xabs=`pwd`"/$xlib" ;;
-	  esac
-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	  xdir="$gentop/$xlib"
-
-	  $show "${rm}r $xdir"
-	  $run ${rm}r "$xdir"
-	  $show "mkdir $xdir"
-	  $run mkdir "$xdir"
-	  status=$?
-	  if test $status -ne 0 && test ! -d "$xdir"; then
-	    exit $status
-	  fi
-	  $show "(cd $xdir && $AR x $xabs)"
-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-	done
+	func_extract_archives $gentop $addlibs
+	oldobjs="$oldobjs $func_extract_archives_result"
       fi
 
       # Do each command in the archive commands.
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	eval cmds=\"$old_archive_from_new_cmds\"
+       cmds=$old_archive_from_new_cmds
       else
-	# Ensure that we have .o objects in place in case we decided
-	# not to build a shared library, and have fallen back to building
-	# static libs even though --disable-static was passed!
-	for oldobj in $oldobjs; do
-	  if test ! -f $oldobj; then
-	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$oldobj"; then
-	      xdir="."
+	eval cmds=\"$old_archive_cmds\"
+
+	if len=`expr "X$cmds" : ".*"` &&
+	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  $echo "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  # GNU ar 2.10+ was changed to match POSIX; thus no paths are
+	  # encoded into archives.  This makes 'ar r' malfunction in
+	  # this piecewise linking case whenever conflicting object
+	  # names appear in distinct ar calls; check, warn and compensate.
+	    if (for obj in $save_oldobjs
+	    do
+	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	    :
+	  else
+	    $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
+	    $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
+	    AR_FLAGS=cq
+	  fi
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  for obj in $save_oldobjs
+	  do
+	    oldobjs="$objlist $obj"
+	    objlist="$objlist $obj"
+	    eval test_cmds=\"$old_archive_cmds\"
+	    if len=`expr "X$test_cmds" : ".*"` &&
+	       test "$len" -le "$max_cmd_len"; then
+	      :
 	    else
-	      xdir="$xdir"
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+	        RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
 	    fi
-	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
-	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
-	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
 	  fi
-	done
-
-	eval cmds=\"$old_archive_cmds\"
+	fi
       fi
       save_ifs="$IFS"; IFS='~'
       for cmd in $cmds; do
+        eval cmd=\"$cmd\"
 	IFS="$save_ifs"
 	$show "$cmd"
 	$run eval "$cmd" || exit $?
@@ -3894,8 +5223,12 @@ fi\
 	fi
       done
       # Quote the link command for shipping.
-      relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
       relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
 
       # Only create the output if not a dry run.
       if test -z "$run"; then
@@ -3911,10 +5244,10 @@ fi\
 	      case $deplib in
 	      *.la)
 		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-		eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		if test -z "$libdir"; then
 		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit 1
+		  exit $EXIT_FAILURE
 		fi
 		newdependency_libs="$newdependency_libs $libdir/$name"
 		;;
@@ -3925,10 +5258,10 @@ fi\
 	    newdlfiles=
 	    for lib in $dlfiles; do
 	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 	      if test -z "$libdir"; then
 		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit 1
+		exit $EXIT_FAILURE
 	      fi
 	      newdlfiles="$newdlfiles $libdir/$name"
 	    done
@@ -3936,20 +5269,39 @@ fi\
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
 	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 	      if test -z "$libdir"; then
 		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit 1
+		exit $EXIT_FAILURE
 	      fi
 	      newdlprefiles="$newdlprefiles $libdir/$name"
 	    done
 	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlfiles="$newdlfiles $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlprefiles="$newdlprefiles $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
 	  fi
 	  $rm $output
 	  # place dlname in correct position for cygwin
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 	  esac
 	  $echo > $output "\
 # $outputname - a libtool library file
@@ -3978,13 +5330,16 @@ revision=$revision
 # Is this an already installed library?
 installed=$installed
 
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
 # Files to dlopen/dlpreopen
 dlopen='$dlfiles'
 dlpreopen='$dlprefiles'
 
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'"
-	  if test "$installed" = no && test $need_relink = yes; then
+	  if test "$installed" = no && test "$need_relink" = yes; then
 	    $echo >> $output "\
 relink_command=\"$relink_command\""
 	  fi
@@ -3997,7 +5352,7 @@ relink_command=\"$relink_command\""
       $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
       ;;
     esac
-    exit 0
+    exit $EXIT_SUCCESS
     ;;
 
   # libtool install mode
@@ -4012,7 +5367,7 @@ relink_command=\"$relink_command\""
       # Aesthetically quote it.
       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
       case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	arg="\"$arg\""
 	;;
       esac
@@ -4028,7 +5383,7 @@ relink_command=\"$relink_command\""
     # Aesthetically quote it.
     arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
     case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+    *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
       arg="\"$arg\""
       ;;
     esac
@@ -4076,7 +5431,7 @@ relink_command=\"$relink_command\""
       # Aesthetically quote the argument.
       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
       case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	arg="\"$arg\""
 	;;
       esac
@@ -4086,13 +5441,13 @@ relink_command=\"$relink_command\""
     if test -z "$install_prog"; then
       $echo "$modename: you must specify an install program" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     if test -n "$prev"; then
       $echo "$modename: the \`$prev' option requires an argument" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     if test -z "$files"; then
@@ -4102,7 +5457,7 @@ relink_command=\"$relink_command\""
 	$echo "$modename: you must specify a destination" 1>&2
       fi
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     # Strip any trailing slash from the destination.
@@ -4120,10 +5475,10 @@ relink_command=\"$relink_command\""
 
       # Not a directory, so check to see that there is only one file specified.
       set dummy $files
-      if test $# -gt 2; then
+      if test "$#" -gt 2; then
 	$echo "$modename: \`$dest' is not a directory" 1>&2
 	$echo "$help" 1>&2
-	exit 1
+	exit $EXIT_FAILURE
       fi
     fi
     case $destdir in
@@ -4135,7 +5490,7 @@ relink_command=\"$relink_command\""
 	*)
 	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
       done
@@ -4160,11 +5515,11 @@ relink_command=\"$relink_command\""
 
       *.la)
 	# Check to see that this really is a libtool archive.
-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
 	else
 	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	library_names=
@@ -4195,12 +5550,33 @@ relink_command=\"$relink_command\""
 	dir="$dir$objdir"
 
 	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  if test "$inst_prefix_dir" = "$destdir"; then
+	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
 	  $echo "$modename: warning: relinking \`$file'" 1>&2
 	  $show "$relink_command"
 	  if $run eval "$relink_command"; then :
 	  else
 	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    continue
+	    exit $EXIT_FAILURE
 	  fi
 	fi
 
@@ -4222,7 +5598,7 @@ relink_command=\"$relink_command\""
 	    $run eval "$striplib $destdir/$realname" || exit $?
 	  fi
 
-	  if test $# -gt 0; then
+	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
 	    for linkname
 	    do
@@ -4235,10 +5611,11 @@ relink_command=\"$relink_command\""
 
 	  # Do each command in the postinstall commands.
 	  lib="$destdir/$realname"
-	  eval cmds=\"$postinstall_cmds\"
+	  cmds=$postinstall_cmds
 	  save_ifs="$IFS"; IFS='~'
 	  for cmd in $cmds; do
 	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
 	    $show "$cmd"
 	    $run eval "$cmd" || exit $?
 	  done
@@ -4278,7 +5655,7 @@ relink_command=\"$relink_command\""
 	*)
 	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
@@ -4296,7 +5673,7 @@ relink_command=\"$relink_command\""
 	  $show "$install_prog $staticobj $staticdest"
 	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
 	fi
-	exit 0
+	exit $EXIT_SUCCESS
 	;;
 
       *)
@@ -4308,21 +5685,49 @@ relink_command=\"$relink_command\""
 	  destfile="$destdir/$destfile"
 	fi
 
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      file=`$echo $file|${SED} 's,.exe$,,'`
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
 	# Do a test to see if this is really a libtool program.
-	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	case $host in
+	*cygwin*|*mingw*)
+	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
 	  notinst_deplibs=
 	  relink_command=
 
+	  # To insure that "foo" is sourced, and not "foo.exe",
+	  # finese the cygwin/MSYS system by explicitly sourcing "foo."
+	  # which disallows the automatic-append-.exe behavior.
+	  case $build in
+	  *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
+	  *) wrapperdot=${wrapper} ;;
+	  esac
 	  # If there is no directory component, then add one.
 	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
+	  */* | *\\*) . ${wrapperdot} ;;
+	  *) . ./${wrapperdot} ;;
 	  esac
 
 	  # Check the variables that should have been set.
 	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
-	    exit 1
+	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+	    exit $EXIT_FAILURE
 	  fi
 
 	  finalize=yes
@@ -4344,10 +5749,17 @@ relink_command=\"$relink_command\""
 	  done
 
 	  relink_command=
+	  # To insure that "foo" is sourced, and not "foo.exe",
+	  # finese the cygwin/MSYS system by explicitly sourcing "foo."
+	  # which disallows the automatic-append-.exe behavior.
+	  case $build in
+	  *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
+	  *) wrapperdot=${wrapper} ;;
+	  esac
 	  # If there is no directory component, then add one.
 	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
+	  */* | *\\*) . ${wrapperdot} ;;
+	  *) . ./${wrapperdot} ;;
 	  esac
 
 	  outputname=
@@ -4356,12 +5768,16 @@ relink_command=\"$relink_command\""
 	      tmpdir="/tmp"
 	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
 	      tmpdir="$tmpdir/libtool-$$"
-	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+	      save_umask=`umask`
+	      umask 0077
+	      if $mkdir "$tmpdir"; then
+	        umask $save_umask
 	      else
+	        umask $save_umask
 		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
 		continue
 	      fi
-	      file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
 	      outputname="$tmpdir/$file"
 	      # Replace the output file specification.
 	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
@@ -4379,14 +5795,14 @@ relink_command=\"$relink_command\""
 	    fi
 	  else
 	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
 	  fi
 	fi
 
 	# remove .exe since cygwin /usr/bin/install will append another
 	# one anyways
 	case $install_prog,$host in
-	/usr/bin/install*,*cygwin*)
+	*/usr/bin/install*,*cygwin*)
 	  case $file:$destfile in
 	  *.exe:*.exe)
 	    # this is ok
@@ -4395,7 +5811,7 @@ relink_command=\"$relink_command\""
 	    destfile=$destfile.exe
 	    ;;
 	  *:*.exe)
-	    destfile=`echo $destfile | sed -e 's,.exe$,,'`
+	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
 	    ;;
 	  esac
 	  ;;
@@ -4416,16 +5832,17 @@ relink_command=\"$relink_command\""
       $show "$install_prog $file $oldlib"
       $run eval "$install_prog \$file \$oldlib" || exit $?
 
-      if test -n "$stripme" && test -n "$striplib"; then
+      if test -n "$stripme" && test -n "$old_striplib"; then
 	$show "$old_striplib $oldlib"
 	$run eval "$old_striplib $oldlib" || exit $?
       fi
 
       # Do each command in the postinstall commands.
-      eval cmds=\"$old_postinstall_cmds\"
+      cmds=$old_postinstall_cmds
       save_ifs="$IFS"; IFS='~'
       for cmd in $cmds; do
 	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
 	$show "$cmd"
 	$run eval "$cmd" || exit $?
       done
@@ -4439,9 +5856,9 @@ relink_command=\"$relink_command\""
     if test -n "$current_libdirs"; then
       # Maybe just do a dry run.
       test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $0 --finish$current_libdirs'
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
     else
-      exit 0
+      exit $EXIT_SUCCESS
     fi
     ;;
 
@@ -4460,10 +5877,11 @@ relink_command=\"$relink_command\""
       for libdir in $libdirs; do
 	if test -n "$finish_cmds"; then
 	  # Do each command in the finish commands.
-	  eval cmds=\"$finish_cmds\"
+	  cmds=$finish_cmds
 	  save_ifs="$IFS"; IFS='~'
 	  for cmd in $cmds; do
 	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
 	    $show "$cmd"
 	    $run eval "$cmd" || admincmds="$admincmds
        $cmd"
@@ -4480,43 +5898,43 @@ relink_command=\"$relink_command\""
     fi
 
     # Exit here if they wanted silent mode.
-    test "$show" = ":" && exit 0
+    test "$show" = : && exit $EXIT_SUCCESS
 
-    echo "----------------------------------------------------------------------"
-    echo "Libraries have been installed in:"
+    $echo "----------------------------------------------------------------------"
+    $echo "Libraries have been installed in:"
     for libdir in $libdirs; do
-      echo "   $libdir"
+      $echo "   $libdir"
     done
-    echo
-    echo "If you ever happen to want to link against installed libraries"
-    echo "in a given directory, LIBDIR, you must either use libtool, and"
-    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    echo "flag during linking and do at least one of the following:"
+    $echo
+    $echo "If you ever happen to want to link against installed libraries"
+    $echo "in a given directory, LIBDIR, you must either use libtool, and"
+    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $echo "flag during linking and do at least one of the following:"
     if test -n "$shlibpath_var"; then
-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      echo "     during execution"
+      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $echo "     during execution"
     fi
     if test -n "$runpath_var"; then
-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      echo "     during linking"
+      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $echo "     during linking"
     fi
     if test -n "$hardcode_libdir_flag_spec"; then
       libdir=LIBDIR
       eval flag=\"$hardcode_libdir_flag_spec\"
 
-      echo "   - use the \`$flag' linker flag"
+      $echo "   - use the \`$flag' linker flag"
     fi
     if test -n "$admincmds"; then
-      echo "   - have your system administrator run these commands:$admincmds"
+      $echo "   - have your system administrator run these commands:$admincmds"
     fi
     if test -f /etc/ld.so.conf; then
-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
     fi
-    echo
-    echo "See any operating system documentation about shared libraries for"
-    echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    echo "----------------------------------------------------------------------"
-    exit 0
+    $echo
+    $echo "See any operating system documentation about shared libraries for"
+    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    $echo "----------------------------------------------------------------------"
+    exit $EXIT_SUCCESS
     ;;
 
   # libtool execute mode
@@ -4528,7 +5946,7 @@ relink_command=\"$relink_command\""
     if test -z "$cmd"; then
       $echo "$modename: you must specify a COMMAND" 1>&2
       $echo "$help"
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     # Handle -dlopen flags immediately.
@@ -4536,18 +5954,18 @@ relink_command=\"$relink_command\""
       if test ! -f "$file"; then
 	$echo "$modename: \`$file' is not a file" 1>&2
 	$echo "$help" 1>&2
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       dir=
       case $file in
       *.la)
 	# Check to see that this really is a libtool archive.
-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
 	else
 	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	# Read the libtool library.
@@ -4574,7 +5992,7 @@ relink_command=\"$relink_command\""
 	  dir="$dir/$objdir"
 	else
 	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 	;;
 
@@ -4614,7 +6032,7 @@ relink_command=\"$relink_command\""
       -*) ;;
       *)
 	# Do a test to see if this is really a libtool program.
-	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
 	  # If there is no directory component, then add one.
 	  case $file in
 	  */* | *\\*) . $file ;;
@@ -4637,7 +6055,7 @@ relink_command=\"$relink_command\""
 	eval "export $shlibpath_var"
       fi
 
-      # Restore saved enviroment variables
+      # Restore saved environment variables
       if test "${save_LC_ALL+set}" = set; then
 	LC_ALL="$save_LC_ALL"; export LC_ALL
       fi
@@ -4646,7 +6064,7 @@ relink_command=\"$relink_command\""
       fi
 
       # Now prepare to actually exec the command.
-      exec_cmd='"$cmd"$args'
+      exec_cmd="\$cmd$args"
     else
       # Display what would be done.
       if test -n "$shlibpath_var"; then
@@ -4654,7 +6072,7 @@ relink_command=\"$relink_command\""
 	$echo "export $shlibpath_var"
       fi
       $echo "$cmd$args"
-      exit 0
+      exit $EXIT_SUCCESS
     fi
     ;;
 
@@ -4682,24 +6100,25 @@ relink_command=\"$relink_command\""
     if test -z "$rm"; then
       $echo "$modename: you must specify an RM program" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     rmdirs=
 
+    origobjdir="$objdir"
     for file in $files; do
       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
       if test "X$dir" = "X$file"; then
 	dir=.
-	objdir="$objdir"
+	objdir="$origobjdir"
       else
-	objdir="$dir/$objdir"
+	objdir="$dir/$origobjdir"
       fi
       name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-      test $mode = uninstall && objdir="$dir"
+      test "$mode" = uninstall && objdir="$dir"
 
       # Remember objdir for removal later, being careful to avoid duplicates
-      if test $mode = clean; then
+      if test "$mode" = clean; then
 	case " $rmdirs " in
 	  *" $objdir "*) ;;
 	  *) rmdirs="$rmdirs $objdir" ;;
@@ -4723,7 +6142,7 @@ relink_command=\"$relink_command\""
       case $name in
       *.la)
 	# Possibly a libtool archive, so verify it.
-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
 	  . $dir/$name
 
 	  # Delete the libtool libraries and symlinks.
@@ -4731,18 +6150,19 @@ relink_command=\"$relink_command\""
 	    rmfiles="$rmfiles $objdir/$n"
 	  done
 	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-	  test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	  test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 
-	  if test $mode = uninstall; then
+	  if test "$mode" = uninstall; then
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      eval cmds=\"$postuninstall_cmds\"
+	      cmds=$postuninstall_cmds
 	      save_ifs="$IFS"; IFS='~'
 	      for cmd in $cmds; do
 		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
 		$show "$cmd"
 		$run eval "$cmd"
-		if test $? != 0 && test "$rmforce" != yes; then
+		if test "$?" -ne 0 && test "$rmforce" != yes; then
 		  exit_status=1
 		fi
 	      done
@@ -4751,13 +6171,14 @@ relink_command=\"$relink_command\""
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      eval cmds=\"$old_postuninstall_cmds\"
+	      cmds=$old_postuninstall_cmds
 	      save_ifs="$IFS"; IFS='~'
 	      for cmd in $cmds; do
 		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
 		$show "$cmd"
 		$run eval "$cmd"
-		if test $? != 0 && test "$rmforce" != yes; then
+		if test "$?" -ne 0 && test "$rmforce" != yes; then
 		  exit_status=1
 		fi
 	      done
@@ -4769,22 +6190,52 @@ relink_command=\"$relink_command\""
 	;;
 
       *.lo)
-	if test "$build_old_libs" = yes; then
-	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
-	  rmfiles="$rmfiles $dir/$oldobj"
+	# Possibly a libtool object, so verify it.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+	  # Read the .lo file
+	  . $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" \
+	     && test "$pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" \
+	     && test "$non_pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$non_pic_object"
+	  fi
 	fi
 	;;
 
       *)
-	# Do a test to see if this is a libtool program.
-	if test $mode = clean &&
-	   (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  relink_command=
-	  . $dir/$file
+	if test "$mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    file=`$echo $file|${SED} 's,.exe$,,'`
+	    noexename=`$echo $name|${SED} 's,.exe$,,'`
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    rmfiles="$rmfiles $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	    relink_command=
+	    . $dir/$noexename
 
-	  rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-	  if test "$fast_install" = yes && test -n "$relink_command"; then
-	    rmfiles="$rmfiles $objdir/lt-$name"
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      rmfiles="$rmfiles $objdir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+	    fi
 	  fi
 	fi
 	;;
@@ -4792,6 +6243,7 @@ relink_command=\"$relink_command\""
       $show "$rm $rmfiles"
       $run $rm $rmfiles || exit_status=1
     done
+    objdir="$origobjdir"
 
     # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do
@@ -4807,20 +6259,20 @@ relink_command=\"$relink_command\""
   "")
     $echo "$modename: you must specify a MODE" 1>&2
     $echo "$generic_help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
     ;;
   esac
 
   if test -z "$exec_cmd"; then
     $echo "$modename: invalid operation mode \`$mode'" 1>&2
     $echo "$generic_help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
   fi
 fi # test -z "$show_help"
 
 if test -n "$exec_cmd"; then
   eval exec $exec_cmd
-  exit 1
+  exit $EXIT_FAILURE
 fi
 
 # We need to display help for each of the modes.
@@ -4839,6 +6291,7 @@ Provide generalized library-building support services.
     --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
     --quiet           same as \`--silent'
     --silent          don't print informational messages
+    --tag=TAG         use configuration variables from tag TAG
     --version         print version information
 
 MODE must be one of the following:
@@ -4852,8 +6305,10 @@ MODE must be one of the following:
       uninstall       remove libraries from an installed directory
 
 MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
-  exit 0
+a more detailed description of MODE.
+
+Report bugs to <bug-libtool@gnu.org>."
+  exit $EXIT_SUCCESS
   ;;
 
 clean)
@@ -4964,6 +6419,9 @@ The following components of LINK-COMMAND are treated specially:
   -no-install       link a not-installable executable
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
   -release RELEASE  specify package release information
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
@@ -5005,14 +6463,34 @@ Otherwise, only FILE itself is deleted using RM."
 *)
   $echo "$modename: invalid operation mode \`$mode'" 1>&2
   $echo "$help" 1>&2
-  exit 1
+  exit $EXIT_FAILURE
   ;;
 esac
 
-echo
+$echo
 $echo "Try \`$modename --help' for more information about other modes."
 
-exit 0
+exit $?
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
 
 # Local Variables:
 # mode:shell-script
diff --git a/bin/reconfigure.sh b/bin/reconfigure.sh
index e480e41..c739172 100644
--- a/bin/reconfigure.sh
+++ b/bin/reconfigure.sh
@@ -14,8 +14,8 @@
 
 
   # Run commands in order
-  echo /afs/ncsa/projects/hdf/packages/automake_1.6.3/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool-1.4.2/Linux_2.4/share/aclocal
-  /afs/ncsa/projects/hdf/packages/automake_1.6.3/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool-1.4.2/Linux_2.4/share/aclocal
+  echo /afs/ncsa/projects/hdf/packages/automake_1.6.3/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
+  /afs/ncsa/projects/hdf/packages/automake_1.6.3/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
 
   echo /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
   /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
diff --git a/c++/Makefile.in b/c++/Makefile.in
index e30d318..85280ec 100644
--- a/c++/Makefile.in
+++ b/c++/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/c++/examples/Makefile.in b/c++/examples/Makefile.in
index 158dce5..ca3d25f 100644
--- a/c++/examples/Makefile.in
+++ b/c++/examples/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in
index 7680d51..ceb89ca 100644
--- a/c++/src/Makefile.in
+++ b/c++/src/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/c++/test/Makefile.in b/c++/test/Makefile.in
index 87e1137..3a6f9ae 100644
--- a/c++/test/Makefile.in
+++ b/c++/test/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/configure b/configure
index 6e03418..fc58a29 100755
--- a/configure
+++ b/configure
@@ -244,17 +244,6 @@ IFS=" 	$as_nl"
 $as_unset CDPATH
 
 
-# Find the correct PATH separator.  Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
-  UNAME=${UNAME-`uname 2>/dev/null`}
-  case X$UNAME in
-    *-DOS) lt_cv_sys_path_separator=';' ;;
-    *)     lt_cv_sys_path_separator=':' ;;
-  esac
-  PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-
 
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
@@ -273,7 +262,7 @@ if test "X$1" = X--no-reexec; then
 elif test "X$1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
   # Yippee, $echo works!
   :
 else
@@ -285,14 +274,14 @@ if test "X$1" = X--fallback-echo; then
   # used as fallback echo
   shift
   cat <<EOF
-
+$*
 EOF
   exit 0
 fi
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test -z "$ECHO"; then
 if test "X${echo_test_string+set}" != Xset; then
@@ -319,8 +308,9 @@ else
   #
   # So, first we look for a working echo in the user's PATH.
 
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for dir in $PATH /usr/ucb; do
+    IFS="$lt_save_ifs"
     if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
        test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
        echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
@@ -329,7 +319,7 @@ else
       break
     fi
   done
-  IFS="$save_ifs"
+  IFS="$lt_save_ifs"
 
   if test "X$echo" = Xecho; then
     # We didn't find a better echo, so look for alternatives.
@@ -403,6 +393,11 @@ fi
 
 
 
+
+tagnames=${tagnames+${tagnames},}CXX
+
+tagnames=${tagnames+${tagnames},}F77
+
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
 # so uname gets run too.
@@ -472,7 +467,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT build build_cpu build_vendor build_os host host_cpu host_vendor host_os CPPFLAGS HSIZET CC CFLAGS LDFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE HDF5_INTERFACES R_LARGE R_INTEGER HADDR_T HSIZE_T HSSIZE_T HID_T SIZE_T OBJECT_NAMELEN_DEFAULT_F FFLAGS F9XSUFFIXFLAG FSEARCH_DIRS F9X F9XMODFLAG F9XMODEXT FC F77 CXX CXXFLAGS ac_ct_CXX CXXDEPMODE CXXCPP LT_STATIC_EXEC PERL AR LN_S ECHO RANLIB ac_ct_RANLIB CPP EGREP LIBTOOL AM_MAKEFLAGS USE_FILTER_DEFLATE USE_FILTER_SZIP SSL GASS TESTGASS SRB TESTSRB BUILD_PDB2HDF BUILD_PDB2HDF_CONDITIONAL_TRUE BUILD_PDB2HDF_CONDITIONAL_FALSE PTHREAD DEBUG_PKG TRACE_API INSTRUMENT_LIBRARY PARALLEL RUNSERIAL RUNPARALLEL TESTPARALLEL ADD_PARALLEL_FILES MPE FILTERS USE_FILTER_SHUFFLE USE_FILTER_FLETCHER32 USE_FILTER_NBIT USE_FILTER_SCALEOFFSET H5_VERSION CONFIG_DATE CONFIG_USER CONFIG_MODE BYTESEX STATIC_SHARED CC_VERSION ROOT DYNAMIC_DIRS HL HL_FOR BUILD_CXX_CONDITIONAL_TRUE BUILD_CXX_CONDITIONAL_FALSE BUILD_PABLO_CONDITIONAL_TRUE BUILD_PABLO_CONDITIONAL_FALSE BUILD_PARALLEL_CONDITIONAL_TRUE BUILD_PARALLEL_CONDITIONAL_FALSE BUILD_FORTRAN_CONDITIONAL_TRUE BUILD_FORTRAN_CONDITIONAL_FALSE BUILD_HDF5_HL_CONDITIONAL_TRUE BUILD_HDF5_HL_CONDITIONAL_FALSE SEARCH SETX LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT build build_cpu build_vendor build_os host host_cpu host_vendor host_os CPPFLAGS HSIZET CC CFLAGS LDFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE HDF5_INTERFACES R_LARGE R_INTEGER HADDR_T HSIZE_T HSSIZE_T HID_T SIZE_T OBJECT_NAMELEN_DEFAULT_F FFLAGS F9XSUFFIXFLAG FSEARCH_DIRS F9X F9XMODFLAG F9XMODEXT FC F77 CXX CXXFLAGS ac_ct_CXX CXXDEPMODE CXXCPP LT_STATIC_EXEC PERL AR EGREP LN_S ECHO ac_ct_AR RANLIB ac_ct_RANLIB CPP ac_ct_F77 LIBTOOL AM_MAKEFLAGS USE_FILTER_DEFLATE USE_FILTER_SZIP SSL GASS TESTGASS SRB TESTSRB BUILD_PDB2HDF BUILD_PDB2HDF_CONDITIONAL_TRUE BUILD_PDB2HDF_CONDITIONAL_FALSE PTHREAD DEBUG_PKG TRACE_API INSTRUMENT_LIBRARY PARALLEL RUNSERIAL RUNPARALLEL TESTPARALLEL ADD_PARALLEL_FILES MPE FILTERS USE_FILTER_SHUFFLE USE_FILTER_FLETCHER32 USE_FILTER_NBIT USE_FILTER_SCALEOFFSET H5_VERSION CONFIG_DATE CONFIG_USER CONFIG_MODE BYTESEX STATIC_SHARED CC_VERSION ROOT DYNAMIC_DIRS HL HL_FOR BUILD_CXX_CONDITIONAL_TRUE BUILD_CXX_CONDITIONAL_FALSE BUILD_PABLO_CONDITIONAL_TRUE BUILD_PABLO_CONDITIONAL_FALSE BUILD_PARALLEL_CONDITIONAL_TRUE BUILD_PARALLEL_CONDITIONAL_FALSE BUILD_FORTRAN_CONDITIONAL_TRUE BUILD_FORTRAN_CONDITIONAL_FALSE BUILD_HDF5_HL_CONDITIONAL_TRUE BUILD_HDF5_HL_CONDITIONAL_FALSE SEARCH SETX LIBOBJS LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -945,6 +940,14 @@ ac_env_CPP_set=${CPP+set}
 ac_env_CPP_value=$CPP
 ac_cv_env_CPP_set=${CPP+set}
 ac_cv_env_CPP_value=$CPP
+ac_env_F77_set=${F77+set}
+ac_env_F77_value=$F77
+ac_cv_env_F77_set=${F77+set}
+ac_cv_env_F77_value=$F77
+ac_env_FFLAGS_set=${FFLAGS+set}
+ac_env_FFLAGS_value=$FFLAGS
+ac_cv_env_FFLAGS_set=${FFLAGS+set}
+ac_cv_env_FFLAGS_value=$FFLAGS
 
 #
 # Report the --help message.
@@ -1039,9 +1042,12 @@ Optional Features:
   --enable-cxx            Compile the C++ interface [default=no]
   --enable-static-exec    Build only statically linked executables
                           [default=no]
-  --enable-shared=PKGS  build shared libraries default=yes
-  --enable-static=PKGS  build static libraries default=yes
-  --enable-fast-install=PKGS  optimize for fast installation default=yes
+  --enable-shared[=PKGS]
+                          build shared libraries [default=yes]
+  --enable-static[=PKGS]
+                          build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
   --disable-libtool-lock  avoid locking (might break parallel builds)
   --enable-production     Determines how to run the compiler.
   --enable-linux-lfs      Enable support for large (64-bit) files on Linux.
@@ -1073,8 +1079,11 @@ Optional Features:
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-gnu-ld           assume the C compiler uses GNU ld default=no
-  --with-pic              try to use only PIC/non-PIC objects default=use both
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-pic              try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-tags[=TAGS]
+                          include additional configurations [automatic]
 
  For the following --with-xxx options, you can specify where the header
  files and libraries are in two different ways:
@@ -1106,6 +1115,8 @@ Some influential environment variables:
   CXXFLAGS    C++ compiler flags
   CXXCPP      C++ preprocessor
   CPP         C preprocessor
+  F77         Fortran 77 compiler command
+  FFLAGS      Fortran 77 compiler flags
 
 Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
@@ -4771,83 +4782,151 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
+
 # Check whether --enable-shared or --disable-shared was given.
 if test "${enable_shared+set}" = set; then
   enableval="$enable_shared"
   p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
   enable_shared=yes
 fi;
+
 # Check whether --enable-static or --disable-static was given.
 if test "${enable_static+set}" = set; then
   enableval="$enable_static"
   p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
   enable_static=yes
 fi;
+
 # Check whether --enable-fast-install or --disable-fast-install was given.
 if test "${enable_fast_install+set}" = set; then
   enableval="$enable_fast_install"
   p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
   enable_fast_install=yes
 fi;
-# Find the correct PATH separator.  Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
-  UNAME=${UNAME-`uname 2>/dev/null`}
-  case X$UNAME in
-    *-DOS) lt_cv_sys_path_separator=';' ;;
-    *)     lt_cv_sys_path_separator=':' ;;
-  esac
-  PATH_SEPARATOR=$lt_cv_sys_path_separator
+
+echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
+if test "${lt_cv_path_SED+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+
 fi
 
+SED=$lt_cv_path_SED
+echo "$as_me:$LINENO: result: $SED" >&5
+echo "${ECHO_T}$SED" >&6
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
 
 # Check whether --with-gnu-ld or --without-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
@@ -4859,8 +4938,8 @@ fi;
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
-  echo "$as_me:$LINENO: checking for ld used by GCC" >&5
-echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -4870,12 +4949,12 @@ echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
   esac
   case $ac_prog in
     # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
+    [\\/]* | ?:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
       while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
@@ -4899,22 +4978,26 @@ if test "${lt_cv_path_LD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       lt_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
 	test "$with_gnu_ld" != no && break
-      else
+	;;
+      *)
 	test "$with_gnu_ld" != yes && break
-      fi
+	;;
+      esac
     fi
   done
-  IFS="$ac_save_ifs"
+  IFS="$lt_save_ifs"
 else
   lt_cv_path_LD="$LD" # Let the user override the test with a path.
 fi
@@ -4937,11 +5020,14 @@ if test "${lt_cv_prog_gnu_ld+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
   lt_cv_prog_gnu_ld=yes
-else
+  ;;
+*)
   lt_cv_prog_gnu_ld=no
-fi
+  ;;
+esac
 fi
 echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
 echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
@@ -4958,7 +5044,20 @@ fi
 echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
 echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
 reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$CC -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
 
 echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
@@ -4969,35 +5068,42 @@ else
   # Let the user override the test.
   lt_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    IFS="$lt_save_ifs"
     test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
+    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
       # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+      */dev/null* | *'Invalid file or object type'*)
 	lt_cv_path_NM="$tmp_nm -B"
 	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
+        ;;
+      *)
+	case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	*/dev/null*)
+	  lt_cv_path_NM="$tmp_nm -p"
+	  break
+	  ;;
+	*)
+	  lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	  continue # so that we can try to find one that supports BSD flags
+	  ;;
+	esac
+      esac
     fi
   done
-  IFS="$ac_save_ifs"
+  IFS="$lt_save_ifs"
   test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
 fi
 fi
-
+echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+echo "${ECHO_T}$lt_cv_path_NM" >&6
 NM="$lt_cv_path_NM"
-echo "$as_me:$LINENO: result: $NM" >&5
-echo "${ECHO_T}$NM" >&6
 
 echo "$as_me:$LINENO: checking whether ln -s works" >&5
 echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
@@ -5010,8 +5116,8 @@ else
 echo "${ECHO_T}no, using $LN_S" >&6
 fi
 
-echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5
-echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
+echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
+echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
 if test "${lt_cv_deplibs_check_method+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5025,7 +5131,7 @@ lt_cv_deplibs_check_method='unknown'
 # 'pass_all' -- all dependencies passed with no checks.
 # 'test_compile' -- check by making test program.
 # 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
+# which responds to the $file_magic_cmd with a given extended regex.
 # If you have `file' or equivalent on your system and you're not sure
 # whether `pass_all' will *always* work, you probably want this one.
 
@@ -5038,37 +5144,36 @@ beos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-bsdi4*)
+bsdi[45]*)
   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
   ;;
 
-cygwin* | mingw* | pw32*)
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
   lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
   ;;
 
 darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd*)
+freebsd* | kfreebsd*-gnu | dragonfly*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
       lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
@@ -5082,50 +5187,44 @@ gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-hpux10.20*|hpux11*)
-  lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libc.sl
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+  case "$host_cpu" in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 # This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+linux*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 netbsd*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
   fi
   ;;
 
@@ -5135,20 +5234,19 @@ newos6*)
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
+nto-qnx*)
+  lt_cv_deplibs_check_method=unknown
+  ;;
+
 openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
   if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
   else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   fi
   ;;
 
 osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -5158,11 +5256,6 @@ sco3.2v5*)
 
 solaris*)
   lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
   ;;
 
 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
@@ -5183,8 +5276,15 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
     lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
     lt_cv_file_magic_test_file=/lib/libc.so
     ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
   esac
   ;;
+
+sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 esac
 
 fi
@@ -5192,208 +5292,210 @@ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
 echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
 
 
 
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
 
+# Allow CC to be a program name with arguments.
+compiler=$CC
 
 
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
 
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo "$as_me:$LINENO: checking command to parse $NM output" >&5
-echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[ABCDGISTW]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-irix*)
-  symcode='[BCDEGRST]'
-  ;;
-solaris* | sysv5*)
-  symcode='[BDT]'
-  ;;
-sysv4)
-  symcode='[DFNSTU]'
-  ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Write the raw and C identifiers.
-lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+    case `/usr/bin/file conftest.$ac_objext` in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line 5338 "configure"' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
+  (exit $ac_status); }; then
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
 
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
 
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
+     cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
+int
+main ()
 {
-EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr) 0}
-};
 
-#ifdef __cplusplus
+  ;
+  return 0;
 }
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  save_LIBS="$LIBS"
-	  save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$save_LIBS"
-	  CFLAGS="$save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  lt_cv_cc_needs_belf=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
+lt_cv_cc_needs_belf=no
 fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  global_symbol_to_cdecl=
-  global_symbol_to_c_name_address=
-else
-  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
-  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
-fi
-if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
-then
-  echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6
-else
-  echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6
 fi
+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+
+esac
+
+need_locks="$enable_libtool_lock"
+
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -5630,21 +5732,6 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
-
-
 echo "$as_me:$LINENO: checking for ANSI C header files" >&5
 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
 if test "${ac_cv_header_stdc+set}" = set; then
@@ -6035,146 +6122,930 @@ done
 
 
 
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6
+if test -z "$CXXCPP"; then
+  if test "${ac_cv_prog_CXXCPP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
 
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+echo "$as_me:$LINENO: result: $CXXCPP" >&5
+echo "${ECHO_T}$CXXCPP" >&6
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  :
+else
+  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+fi
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_F77+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
+  if test -n "$F77"; then
+  ac_cv_prog_F77="$F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
 
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
+fi
+fi
+F77=$ac_cv_prog_F77
+if test -n "$F77"; then
+  echo "$as_me:$LINENO: result: $F77" >&5
+echo "${ECHO_T}$F77" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
 
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
+    test -n "$F77" && break
   done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
 fi
+if test -z "$F77"; then
+  ac_ct_F77=$F77
+  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_F77"; then
+  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_F77="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
+fi
+fi
+ac_ct_F77=$ac_cv_prog_ac_ct_F77
+if test -n "$ac_ct_F77"; then
+  echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
+echo "${ECHO_T}$ac_ct_F77" >&6
 else
   echo "$as_me:$LINENO: result: no" >&5
 echo "${ECHO_T}no" >&6
 fi
 
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  test -n "$ac_ct_F77" && break
+done
+
+  F77=$ac_ct_F77
+fi
+
+
+# Provide some information about the compiler.
+echo "$as_me:6452:" \
+     "checking for Fortran 77 compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+rm -f a.out
+
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file.  (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6
+if test "${ac_cv_f77_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  cat >conftest.$ac_ext <<_ACEOF
+      program main
+#ifndef __GNUC__
+       choke me
+#endif
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_compiler_gnu=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6
+ac_ext=$ac_save_ext
+ac_test_FFLAGS=${FFLAGS+set}
+ac_save_FFLAGS=$FFLAGS
+FFLAGS=
+echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
+echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_f77_g+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  FFLAGS=-g
+cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_f77_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_f77_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
+echo "${ECHO_T}$ac_cv_prog_f77_g" >&6
+if test "$ac_test_FFLAGS" = set; then
+  FFLAGS=$ac_save_FFLAGS
+elif test $ac_cv_prog_f77_g = yes; then
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-g -O2"
+  else
+    FFLAGS="-g"
+  fi
+else
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-O2"
+  else
+    FFLAGS=
+  fi
+fi
+
+G77=`test $ac_compiler_gnu = yes && echo yes`
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# find the maximum length of command line arguments
+echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    ;;
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  *)
+    # If test is not a shell built-in, we'll probably end up computing a
+    # maximum length that is only half of the actual maximum length, but
+    # we can't tell.
+    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+    while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	    lt_cv_sys_max_cmd_len=$new_result &&
+	    test $i != 17 # 1/2 MB should be enough
+    do
+      i=`expr $i + 1`
+      teststring=$teststring$teststring
+    done
+    teststring=
+    # Add a significant safety factor because C++ compilers can tack on massive
+    # amounts of additional arguments before passing them to the linker.
+    # It appears as though 1/2 is a usable value.
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+else
+  echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+fi
+
+
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
   ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+cygwin* | mingw* | pw32*)
+  symcode='[ABCDGISTW]'
   ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
+hpux*) # Its linker distinguishes data from code symbols
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+linux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDGIRSTW]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris* | sysv5*)
+  symcode='[BDRT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
 
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
 
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
 EOF
-	  fi ;;
-	esac
+
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
       fi
-      break
+
+      # Make sure that we snagged all the symbols we need.
+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
     fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -f conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6
+else
+  echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6
+fi
+
+echo "$as_me:$LINENO: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+if test "${lt_cv_objdir+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+echo "${ECHO_T}$lt_cv_objdir" >&6
+objdir=$lt_cv_objdir
+
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
   ;;
 esac
-fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
 else
   echo "$as_me:$LINENO: result: no" >&5
 echo "${ECHO_T}no" >&6
 fi
 
-  else
-    MAGIC_CMD=:
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
   fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-  fi
-  ;;
-esac
+  AR=$ac_ct_AR
+else
+  AR="$ac_cv_prog_AR"
+fi
 
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
@@ -6337,150 +7208,6 @@ else
 fi
 
 
-enable_dlopen=no
-enable_win32_dll=no
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-
-fi;
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 6355 "configure"' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
-if test "${lt_cv_cc_needs_belf+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-     cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  lt_cv_cc_needs_belf=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-lt_cv_cc_needs_belf=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-need_locks="$enable_libtool_lock"
-
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 
@@ -6489,40 +7216,18 @@ test -z "$AR" && AR=ar
 test -z "$AR_FLAGS" && AR_FLAGS=cru
 test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
 test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
 test -z "$LN_S" && LN_S="ln -s"
 test -z "$MAGIC_CMD" && MAGIC_CMD=file
 test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
 test -z "$OBJDUMP" && OBJDUMP=objdump
 test -z "$RANLIB" && RANLIB=:
 test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
-if test x"$host" != x"$build"; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case $host_os in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
 # Determine commands to create old-style static archives.
 old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
 old_postinstall_cmds='chmod 644 $oldlib'
@@ -6540,24 +7245,152 @@ if test -n "$RANLIB"; then
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
 
-echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  objdir=.libs
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  # MS-DOS does not allow filenames that begin with a dot.
-  objdir=_libs
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
 fi
-rmdir .libs 2>/dev/null
-echo "$as_me:$LINENO: result: $objdir" >&5
-echo "${ECHO_T}$objdir" >&6
 
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+enable_dlopen=yes
+enable_win32_dll=no
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 
 # Check whether --with-pic or --without-pic was given.
@@ -6569,171 +7402,818 @@ else
 fi;
 test -z "$pic_mode" && pic_mode=default
 
-# We assume here that the value for lt_cv_prog_cc_pic will not be cached
-# in isolation, and that seeing it set (from the cache) indicates that
-# the associated values are set (in the cache) correctly too.
+# Use C for the default configuration in the libtool script
+tagname=
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}\n'
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+#
+# Check for any special shared library compilation flags.
+#
+lt_prog_cc_shlib=
+if test "$GCC" = no; then
+  case $host_os in
+  sco3.2v5*)
+    lt_prog_cc_shlib='-belf'
+    ;;
+  esac
+fi
+if test -n "$lt_prog_cc_shlib"; then
+  { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5
+echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;}
+  if echo "$old_CC $old_CFLAGS " | grep "[ 	]$lt_prog_cc_shlib[ 	]" >/dev/null; then :
+  else
+    { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
+echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
+    lt_cv_prog_cc_can_build_shared=no
+  fi
+fi
+
+
+#
+# Check to make sure the static flag actually works.
+#
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_prog_compiler_static"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+     else
+       lt_prog_compiler_static_works=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
+
+if test x"$lt_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:7521: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:7525: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s conftest.err; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
 echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
 echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
-if test "${lt_cv_prog_cc_pic+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-   lt_cv_prog_cc_pic=
-  lt_cv_prog_cc_shlib=
-  lt_cv_prog_cc_wl=
-  lt_cv_prog_cc_static=
-  lt_cv_prog_cc_no_builtin=
-  lt_cv_prog_cc_can_build_shared=$can_build_shared
 
   if test "$GCC" = yes; then
-    lt_cv_prog_cc_wl='-Wl,'
-    lt_cv_prog_cc_static='-static'
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
 
     case $host_os in
-    aix*)
-      # Below there is a dirty hack to force normal static linking with -ldl
-      # The problem is because libdl dynamically linked with both libc and
-      # libC (AIX C++ library), which obviously doesn't included in libraries
-      # list by gcc. This cause undefined symbols with -static flags.
-      # This hack allows C programs to be linked with "-static -ldl", but
-      # not sure about C++ programs.
-      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
       ;;
+
     amigaos*)
       # FIXME: we need at least 68020 code to build shared libraries, but
       # adding the `-m68020' flag to GCC prevents building anything better,
       # like `-m68040'.
-      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
       ;;
-    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
     darwin* | rhapsody*)
       # PIC is the default on this platform
       # Common symbols not allowed in MH_DYLIB files
-      lt_cv_prog_cc_pic='-fno-common'
+      lt_prog_compiler_pic='-fno-common'
       ;;
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_cv_prog_cc_pic='-DDLL_EXPORT'
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
       ;;
+
     sysv4*MP*)
       if test -d /usr/nec; then
-	 lt_cv_prog_cc_pic=-Kconform_pic
+	lt_prog_compiler_pic=-Kconform_pic
       fi
       ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
     *)
-      lt_cv_prog_cc_pic='-fPIC'
+      lt_prog_compiler_pic='-fPIC'
       ;;
     esac
   else
-    # PORTME Check for PIC flags for the system compiler.
+    # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
-    aix3* | aix4* | aix5*)
-      lt_cv_prog_cc_wl='-Wl,'
-      # All AIX code is PIC.
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
-	lt_cv_prog_cc_static='-Bstatic'
+	lt_prog_compiler_static='-Bstatic'
       else
-	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case "$cc_basename" in
+         xlc*)
+         lt_prog_compiler_pic='-qnocommon'
+         lt_prog_compiler_wl='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
 
     hpux9* | hpux10* | hpux11*)
-      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
-      lt_cv_prog_cc_pic='+Z'
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
       ;;
 
-    irix5* | irix6*)
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static='-non_shared'
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
       # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
       ;;
 
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_cv_prog_cc_pic='-DDLL_EXPORT'
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
       ;;
 
-    newsos6)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      pgcc | pgf77 | pgf90)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-static'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      esac
       ;;
 
     osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
       # All OSF/1 code is PIC.
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static='-non_shared'
+      lt_prog_compiler_static='-non_shared'
       ;;
 
     sco3.2v5*)
-      lt_cv_prog_cc_pic='-Kpic'
-      lt_cv_prog_cc_static='-dn'
-      lt_cv_prog_cc_shlib='-belf'
+      lt_prog_compiler_pic='-Kpic'
+      lt_prog_compiler_static='-dn'
       ;;
 
     solaris*)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Wl,'
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
       ;;
 
     sunos4*)
-      lt_cv_prog_cc_pic='-PIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Qoption ld '
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
       ;;
 
     sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      if test "x$host_vendor" = xsni; then
-	lt_cv_prog_cc_wl='-LD'
-      else
-	lt_cv_prog_cc_wl='-Wl,'
-      fi
-      ;;
-
-    uts4*)
-      lt_cv_prog_cc_pic='-pic'
-      lt_cv_prog_cc_static='-Bstatic'
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
       ;;
 
     sysv4*MP*)
       if test -d /usr/nec ;then
-	lt_cv_prog_cc_pic='-Kconform_pic'
-	lt_cv_prog_cc_static='-Bstatic'
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
       fi
       ;;
 
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
     *)
-      lt_cv_prog_cc_can_build_shared=no
+      lt_prog_compiler_can_build_shared=no
       ;;
     esac
   fi
 
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:7776: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:7780: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s conftest.err; then
+       lt_prog_compiler_pic_works=yes
+     fi
+   fi
+   $rm conftest*
+
 fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6
 
-if test -z "$lt_cv_prog_cc_pic"; then
-  echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6
+if test x"$lt_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
 else
-  echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5
-echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
 
-  # Check to make sure the pic_flag actually works.
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6
-  if test "${lt_cv_prog_cc_pic_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+case "$host_os" in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:7836: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:7840: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s out/conftest.err; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w .
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
 else
-      save_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
-    cat >conftest.$ac_ext <<_ACEOF
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  runpath_var=
+  allow_undefined_flag=
+  enable_shared_with_static_runtimes=no
+  archive_cmds=
+  archive_expsym_cmds=
+  old_archive_From_new_cmds=
+  old_archive_from_expsyms_cmds=
+  export_dynamic_flag_spec=
+  whole_archive_flag_spec=
+  thread_safe_flag_spec=
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_flag_spec_ld=
+  hardcode_libdir_separator=
+  hardcode_direct=no
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  link_all_deplibs=unknown
+  hardcode_automatic=no
+  module_cmds=
+  module_expsym_cmds=
+  always_export_symbols=no
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris* | sysv5*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+  linux*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      tmp_addflag=
+      case $CC,$host_cpu in
+      pgf77* | pgf90* )			# Portland Group f77 and f90 compilers
+        tmp_addflag=' -fpic' ;;
+      ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+        tmp_addflag=' -i_dynamic' ;;
+      efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+        tmp_addflag=' -i_dynamic -nofor_main' ;;
+      ifc* | ifort*)			# Intel Fortran compiler
+      	tmp_addflag=' -nofor_main' ;;
+      esac
+      archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      supports_anon_versioning=no
+      case `$LD -v 2>/dev/null` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+        *\ 2.11.*) ;; # other 2.11 versions
+        *) supports_anon_versioning=yes ;;
+      esac
+      if test $supports_anon_versioning = yes; then
+        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+        $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+      else
+        archive_expsym_cmds=$archive_cmds
+      fi
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = yes; then
+      runpath_var=LD_RUN_PATH
+      hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+      export_dynamic_flag_spec='${wl}--export-dynamic'
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+ 	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec=
+      fi
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$link_static_flag"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  hardcode_direct=yes
+	  else
+  	  # We have old collect2
+  	  hardcode_direct=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L=yes
+  	  hardcode_libdir_flag_spec='-L$libdir'
+  	  hardcode_libdir_separator=
+	  fi
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+  	if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+  	fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -6748,9 +8228,9 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -6764,83 +8244,1242 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
-        case $host_os in
-      hpux9* | hpux10* | hpux11*)
-	# On HP-UX, both CC and GCC only warn that PIC is supported... then
-	# they create non-PIC objects.  So, if there were any warnings, we
-	# assume that PIC is not supported.
-	if test -s conftest.err; then
-	  lt_cv_prog_cc_pic_works=no
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
 	else
-	  lt_cv_prog_cc_pic_works=yes
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  # -bexpall does not export symbols beginning with underscore (_)
+	  always_export_symbols=yes
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec=' '
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds it's shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      allow_undefined_flag=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case "$host_os" in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc=no
+      hardcode_direct=no
+      hardcode_automatic=yes
+      hardcode_shlibpath_var=unsupported
+      whole_archive_flag_spec=''
+      link_all_deplibs=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | kfreebsd*-gnu | dragonfly*)
+      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10* | hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  ;;
+	*)
+	  archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	case "$host_cpu" in
+	hppa*64*)
+	  hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	  hardcode_libdir_flag_spec_ld='+b $libdir'
+	  hardcode_libdir_separator=:
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	ia64*)
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	*)
+	  hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	  hardcode_libdir_separator=:
+	  hardcode_direct=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    openbsd*)
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	   archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   hardcode_libdir_flag_spec='-R$libdir'
+	   ;;
+	 *)
+	   archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      hardcode_libdir_separator=:
+      ;;
+
+    sco3.2v5*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z text'
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+	whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
 	;;
-      *)
-	lt_cv_prog_cc_pic_works=yes
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
 	;;
       esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4.2uw2*)
+      archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=no
+      hardcode_shlibpath_var=no
+      hardcode_runpath_var=yes
+      runpath_var=LD_RUN_PATH
+      ;;
+
+   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
+      no_undefined_flag='${wl}-z ${wl}text'
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv5*)
+      no_undefined_flag=' -z text'
+      # $CC -shared without GNU ld will not create a library from C++
+      # object files and a static libstdc++, better avoid it by now
+      archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      hardcode_libdir_flag_spec=
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+  fi
 
-      lt_cv_prog_cc_pic_works=no
+echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6
+test "$ld_shlibs" = no && can_build_shared=no
 
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-    CFLAGS="$save_CFLAGS"
 
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag
+        allow_undefined_flag=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc=no
+        else
+	  archive_cmds_need_lc=yes
+        fi
+        allow_undefined_flag=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+echo "${ECHO_T}$archive_cmds_need_lc" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
 
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
 
-  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
-    lt_cv_prog_cc_pic=
-    lt_cv_prog_cc_can_build_shared=no
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
   else
-    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
   fi
+  ;;
 
-  echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5
-echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6
-fi
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
 
-# Check for any special shared library compilation flags.
-if test -n "$lt_cv_prog_cc_shlib"; then
-  { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5
-echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;}
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$lt_cv_prog_cc_shlib[ 	]" >/dev/null; then :
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
   else
-   { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
-echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
-    lt_cv_prog_cc_can_build_shared=no
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
   fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  *) # from 3.2 on
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case "$host_cpu" in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var" || \
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+striplib=
+old_striplib=
+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+       else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+       ;;
+   *)
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+    ;;
+  esac
 fi
 
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6
-if test "${lt_cv_prog_cc_static_works+set}" = set; then
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-    lt_cv_prog_cc_static_works=no
-  save_LDFLAGS="$LDFLAGS"
-  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
 int
 main ()
 {
-
+dlopen ();
   ;
   return 0;
 }
@@ -6867,111 +9506,251 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
-  lt_cv_prog_cc_static_works=yes
+  ac_cv_lib_dl_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+ac_cv_lib_dl_dlopen=no
 fi
 rm -f conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
-  LDFLAGS="$save_LDFLAGS"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
 
 fi
 
+   ;;
+
+  *)
+    echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+if test "${ac_cv_func_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define shl_load innocuous_shl_load
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
 
-# Belt *and* braces to stop my trousers falling down:
-test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
-echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5
-echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
 
-pic_flag="$lt_cv_prog_cc_pic"
-special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
-wl="$lt_cv_prog_cc_wl"
-link_static_flag="$lt_cv_prog_cc_static"
-no_builtin_flag="$lt_cv_prog_cc_no_builtin"
-can_build_shared="$lt_cv_prog_cc_can_build_shared"
+#undef shl_load
 
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
+#endif
 
-# Check to see if options -o and -c are simultaneously supported by compiler
-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
-if test "${lt_cv_compiler_c_o+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-$rm -r conftest 2>/dev/null
-mkdir conftest
-cd conftest
-echo "int some_variable = 0;" > conftest.$ac_ext
-mkdir out
-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-# that will create temporary files in the current directory regardless of
-# the output directory.  Thus, making CWD read-only will cause this test
-# to fail, enabling locking or at least warning the user not to do parallel
-# builds.
-chmod -w .
-save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
-compiler_c_o=no
-if { (eval echo configure:6917: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
-  # The compiler can only warn and ignore the option if not recognized
-  # So say no if there are warnings
-  if test -s out/conftest.err; then
-    lt_cv_compiler_c_o=no
-  else
-    lt_cv_compiler_c_o=yes
-  fi
+int
+main ()
+{
+return f != shl_load;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_shl_load=yes
 else
-  # Append any errors to the config.log.
-  cat out/conftest.err 1>&5
-  lt_cv_compiler_c_o=no
-fi
-CFLAGS="$save_CFLAGS"
-chmod u+w .
-$rm conftest* out/*
-rmdir out
-cd ..
-rmdir conftest
-$rm -r conftest 2>/dev/null
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
+ac_cv_func_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 fi
+echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+if test $ac_cv_func_shl_load = yes; then
+  lt_cv_dlopen="shl_load"
+else
+  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-compiler_c_o=$lt_cv_compiler_c_o
-echo "$as_me:$LINENO: result: $compiler_c_o" >&5
-echo "${ECHO_T}$compiler_c_o" >&6
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+int
+main ()
+{
+shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-if test x"$compiler_c_o" = x"yes"; then
-  # Check to see if we can write to a .lo
-  echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6
-  if test "${lt_cv_compiler_o_lo+set}" = set; then
+ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+if test $ac_cv_lib_dld_shl_load = yes; then
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+else
+  echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+if test "${ac_cv_func_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-
-  lt_cv_compiler_o_lo=no
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -c -o conftest.lo"
-  save_objext="$ac_objext"
-  ac_objext=lo
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define dlopen innocuous_dlopen
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef dlopen
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
+#endif
 
 int
 main ()
 {
-int some_variable = 0;
+return f != dlopen;
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -6985,87 +9764,193 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
-      # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-    if test -s conftest.err; then
-      lt_cv_compiler_o_lo=no
-    else
-      lt_cv_compiler_o_lo=yes
-    fi
-
+  ac_cv_func_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+ac_cv_func_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  ac_objext="$save_objext"
-  CFLAGS="$save_CFLAGS"
-
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 fi
+echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+if test $ac_cv_func_dlopen = yes; then
+  lt_cv_dlopen="dlopen"
+else
+  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-  compiler_o_lo=$lt_cv_compiler_o_lo
-  echo "$as_me:$LINENO: result: $compiler_o_lo" >&5
-echo "${ECHO_T}$compiler_o_lo" >&6
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dl_dlopen=yes
 else
-  compiler_o_lo=no
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
 fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-# Check to see if we can do hard links to lock some files if needed
-hard_links="nottested"
-if test "$compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_svld_dlopen=yes
 else
-  need_locks=no
-fi
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-if test "$GCC" = yes; then
-  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
-  echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
-  compiler_rtti_exceptions=no
-  cat >conftest.$ac_ext <<_ACEOF
+ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+if test $ac_cv_lib_svld_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dld_link ();
 int
 main ()
 {
-int some_variable = 0;
+dld_link ();
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -7079,301 +9964,1108 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
-      # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-    if test -s conftest.err; then
-      compiler_rtti_exceptions=no
-    else
-      compiler_rtti_exceptions=yes
-    fi
-
+  ac_cv_lib_dld_dld_link=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+ac_cv_lib_dld_dld_link=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  CFLAGS="$save_CFLAGS"
-  echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$compiler_rtti_exceptions" >&6
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+if test $ac_cv_lib_dld_dld_link = yes; then
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
 
-  if test "$compiler_rtti_exceptions" = "yes"; then
-    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
   else
-    no_builtin_flag=' -fno-builtin'
+    enable_dlopen=no
   fi
-fi
 
-# See if the linker supports building shared libraries.
-echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
-allow_undefined_flag=
-no_undefined_flag=
-need_lib_prefix=unknown
-need_version=unknown
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-archive_cmds=
-archive_expsym_cmds=
-old_archive_from_new_cmds=
-old_archive_from_expsyms_cmds=
-export_dynamic_flag_spec=
-whole_archive_flag_spec=
-thread_safe_flag_spec=
-hardcode_into_libs=no
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-link_all_deplibs=unknown
-always_export_symbols=no
-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-# include_expsyms should be a list of space-separated symbols to be *always*
-# included in the symbol list
-include_expsyms=
-# exclude_expsyms can be an egrep regular expression of symbols to exclude
-# it will be wrapped by ` (' and `)$', so one must not match beginning or
-# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that contains `d'.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-# platforms (ab)use it in PIC code, but their linkers get confused if
-# the symbol is explicitly referenced.  Since portable code cannot
-# rely on this symbol name, it's probably fine to never include it in
-# preloaded symbol tables.
-extract_expsyms_cmds=
+    save_LDFLAGS="$LDFLAGS"
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-case $host_os in
-cygwin* | mingw* | pw32*)
-  # FIXME: the MSVC++ port hasn't been tested in a loooong time
-  # When not using gcc, we currently assume that we are using
-  # Microsoft Visual C++.
-  if test "$GCC" != yes; then
-    with_gnu_ld=no
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 10036 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
   fi
-  ;;
-openbsd*)
-  with_gnu_ld=no
-  ;;
-esac
+fi
+rm -fr conftest*
 
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  # If archive_cmds runs LD, not CC, wlarc should be empty
-  wlarc='${wl}'
 
-  # See if GNU ld supports shared libraries.
-  case $host_os in
-  aix3* | aix4* | aix5*)
-    # On AIX, the GNU linker is very broken
-    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
-    ld_shlibs=no
-    cat <<EOF 1>&2
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      LDFLAGS="$LDFLAGS $link_static_flag"
+      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 10134 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
 
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+
+    exit (status);
+}
 EOF
-    ;;
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
 
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-
-    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-    # that the semantics of dynamic libraries on AmigaOS, at least up
-    # to version 4, is to share data among multiple programs linked
-    # with the same dynamic library.  Since this doesn't match the
-    # behavior of shared libraries on other platforms, we can use
-    # them.
-    ld_shlibs=no
-    ;;
 
-  beos*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs=no
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
     fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
     ;;
+  esac
 
-  cygwin* | mingw* | pw32*)
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec='-L$libdir'
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-
-    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
-      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
-      else $CC -o impgen impgen.c ; fi)~
-      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-    # cygwin and mingw dlls have different entry points and sets of symbols
-    # to exclude.
-    # FIXME: what about values for MSVC?
-    dll_entry=__cygwin_dll_entry@12
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-    case $host_os in
-    mingw*)
-      # mingw values
-      dll_entry=_DllMainCRTStartup@12
-      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-      ;;
-    esac
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
 
-    # mingw and cygwin differ, and it's simplest to just exclude the union
-    # of the two symbol sets.
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
 
-    # recent cygwin and mingw systems supply a stub DllMain which the user
-    # can override, but on older systems we have to supply one (in ltdll.c)
-    if test "x$lt_cv_need_dllmain" = "xyes"; then
-      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
-	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-    else
-      ltdll_obj=
-      ltdll_cmds=
-    fi
+# Report which librarie types wil actually be built
+echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6
 
-    # Extract the symbol export list from an `--export-all' def file,
-    # then regenerate the def file from the symbol export list, so that
-    # the compiled dll only exports the symbol export list.
-    # Be careful not to strip the DATA tag left be newer dlltools.
-    export_symbols_cmds="$ltdll_cmds"'
-      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-    # If the export-symbols file already is a .def file (1st line
-    # is EXPORTS), use it as is.
-    # If DATA tags from a recent dlltool are present, honour them!
-    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname-def;
-      else
-	echo EXPORTS > $output_objdir/$soname-def;
-	_lt_hint=1;
-	cat $export_symbols | while read symbol; do
-	 set dummy \$symbol;
-	 case \$# in
-	   2) echo "   \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	   *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
-	 esac;
-	 _lt_hint=`expr 1 + \$_lt_hint`;
-	done;
-      fi~
-      '"$ltdll_cmds"'
-      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
     ;;
+esac
+echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6
 
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-      wlarc=
-    else
-      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    fi
+echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler \
+    CC \
+    LD \
+    lt_prog_compiler_wl \
+    lt_prog_compiler_pic \
+    lt_prog_compiler_static \
+    lt_prog_compiler_no_builtin_flag \
+    export_dynamic_flag_spec \
+    thread_safe_flag_spec \
+    whole_archive_flag_spec \
+    enable_shared_with_static_runtimes \
+    old_archive_cmds \
+    old_archive_from_new_cmds \
+    predep_objects \
+    postdep_objects \
+    predeps \
+    postdeps \
+    compiler_lib_search_path \
+    archive_cmds \
+    archive_expsym_cmds \
+    postinstall_cmds \
+    postuninstall_cmds \
+    old_archive_from_expsyms_cmds \
+    allow_undefined_flag \
+    no_undefined_flag \
+    export_symbols_cmds \
+    hardcode_libdir_flag_spec \
+    hardcode_libdir_flag_spec_ld \
+    hardcode_libdir_separator \
+    hardcode_automatic \
+    module_cmds \
+    module_expsym_cmds \
+    lt_cv_prog_compiler_c_o \
+    exclude_expsyms \
+    include_expsyms; do
+
+    case $var in
+    old_archive_cmds | \
+    old_archive_from_new_cmds | \
+    archive_cmds | \
+    archive_expsym_cmds | \
+    module_cmds | \
+    module_expsym_cmds | \
+    old_archive_from_expsyms_cmds | \
+    export_symbols_cmds | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
     ;;
+  esac
 
-  solaris* | sysv5*)
-    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-      ld_shlibs=no
-      cat <<EOF 1>&2
+cfgfile="${ofile}T"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  $rm -f "$cfgfile"
+  { echo "$as_me:$LINENO: creating $ofile" >&5
+echo "$as_me: creating $ofile" >&6;}
 
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+  cat <<__EOF__ >> "$cfgfile"
+#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# A language-specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
 
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# ### END LIBTOOL CONFIG
+
+__EOF__
+
+
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "$cfgfile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
 EOF
-    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
     ;;
+  esac
 
-  sunos4*)
-    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    wlarc=
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
 
-  *)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+  mv -f "$cfgfile" "$ofile" || \
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+# Check whether --with-tags or --without-tags was given.
+if test "${with_tags+set}" = set; then
+  withval="$with_tags"
+  tagnames="$withval"
+fi;
+
+if test -f "$ltmain" && test -n "$tagnames"; then
+  if test ! -f "${ofile}"; then
+    { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
+echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
+echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
     else
-      ld_shlibs=no
+      { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
+echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
+    fi
+  fi
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+  for tagname in $tagnames; do
+    IFS="$lt_save_ifs"
+    # Check whether tagname contains only valid characters
+    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
+    "") ;;
+    *)  { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
+echo "$as_me: error: invalid tag name: $tagname" >&2;}
+   { (exit 1); exit 1; }; }
+	;;
+    esac
+
+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+    then
+      { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
+echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
+   { (exit 1); exit 1; }; }
     fi
+
+    # Update the list of available tags.
+    if test -n "$tagname"; then
+      echo appending configuration tag \"$tagname\" to $ofile
+
+      case $tagname in
+      CXX)
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
+	  ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_flag_spec_ld_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_automatic_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+# Source file extension for C++ test sources.
+ac_ext=cc
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *) { return(0); }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+  unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+  lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+  unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+compiler_CXX=$CC
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+else
+  lt_prog_compiler_no_builtin_flag_CXX=
+fi
+
+if test "$GXX" = yes; then
+  # Set up default GNU C++ configuration
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+  withval="$with_gnu_ld"
+  test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
     ;;
   esac
+elif test "$with_gnu_ld" = yes; then
+  echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
 
-  if test "$ld_shlibs" = yes; then
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    case $host_os in
-    cygwin* | mingw* | pw32*)
-      # dlltool doesn't understand --whole-archive et. al.
-      whole_archive_flag_spec=
-      ;;
-    *)
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-	whole_archive_flag_spec=
-      fi
-      ;;
-    esac
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if test "$with_gnu_ld" = yes; then
+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
+
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+	grep 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec_CXX=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
   fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
 else
-  # PORTME fill in a description of your system's linker (not GNU ld)
-  case $host_os in
+  GXX=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+# PORTME: fill in a description of your system's C++ link characteristics
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+ld_shlibs_CXX=yes
+case $host_os in
   aix3*)
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-    # Note: this linker hardcodes the directories in LIBPATH if there
-    # are no directories specified by -L.
-    hardcode_minus_L=yes
-    if test "$GCC" = yes && test -z "$link_static_flag"; then
-      # Neither direct hardcoding nor static linking is supported with a
-      # broken collect2.
-      hardcode_direct=unsupported
-    fi
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
     ;;
-
   aix4* | aix5*)
     if test "$host_cpu" = ia64; then
       # On IA64, the linker does run time linking by default, so we don't
@@ -7389,10 +11081,12 @@ else
       # need to do runtime linking.
       case $host_os in aix4.[23]|aix4.[23].*|aix5*)
 	for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	  case $ld_flag in
+	  *-brtl*)
 	    aix_use_runtimelinking=yes
 	    break
-	  fi
+	    ;;
+	  esac
 	done
       esac
 
@@ -7406,34 +11100,42 @@ else
     # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
     # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-    hardcode_direct=yes
-    archive_cmds=''
-    hardcode_libdir_separator=':'
-    if test "$GCC" = yes; then
+    archive_cmds_CXX=''
+    hardcode_direct_CXX=yes
+    hardcode_libdir_separator_CXX=':'
+    link_all_deplibs_CXX=yes
+
+    if test "$GXX" = yes; then
       case $host_os in aix4.[012]|aix4.[012].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
 	collect2name=`${CC} -print-prog-name=collect2`
 	if test -f "$collect2name" && \
-	  strings "$collect2name" | grep resolve_lib_name >/dev/null
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
 	then
 	  # We have reworked collect2
-	  hardcode_direct=yes
+	  hardcode_direct_CXX=yes
 	else
 	  # We have old collect2
-	  hardcode_direct=unsupported
+	  hardcode_direct_CXX=unsupported
 	  # It fails to find uninstalled libraries when the uninstalled
 	  # path is not listed in the libpath.  Setting hardcode_minus_L
 	  # to unsupported forces relinking
-	  hardcode_minus_L=yes
-	  hardcode_libdir_flag_spec='-L$libdir'
-	  hardcode_libdir_separator=
+	  hardcode_minus_L_CXX=yes
+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
+	  hardcode_libdir_separator_CXX=
 	fi
       esac
-
       shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
     else
       # not using gcc
       if test "$host_cpu" = ia64; then
-	shared_flag='${wl}-G'
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	shared_flag='-G'
       else
 	if test "$aix_use_runtimelinking" = yes; then
 	  shared_flag='${wl}-G'
@@ -7443,385 +11145,5193 @@ else
       fi
     fi
 
-    # It seems that -bexpall can do strange things, so it is better to
-    # generate a list of symbols to export.
-    always_export_symbols=yes
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
+    always_export_symbols_CXX=yes
     if test "$aix_use_runtimelinking" = yes; then
       # Warning - without using the other runtime loading flags (-brtl),
       # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag='-berok'
-      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-    else
+      allow_undefined_flag_CXX='-berok'
+      # Determine the default libpath from the value encoded in an empty executable.
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+     else
       if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag="-z nodefs"
-	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+	allow_undefined_flag_CXX="-z nodefs"
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
       else
-	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+	# Determine the default libpath from the value encoded in an empty executable.
+	cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
 	# Warning - without using the other run time loading flags,
 	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag='${wl}-berok'
-	# This is a bit strange, but is similar to how AIX traditionally builds
-	# it's shared libraries.
-	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
+	no_undefined_flag_CXX=' ${wl}-bernotok'
+	allow_undefined_flag_CXX=' ${wl}-berok'
+	# -bexpall does not export symbols beginning with underscore (_)
+	always_export_symbols_CXX=yes
+	# Exported symbols can be pulled into shared objects from archives
+	whole_archive_flag_spec_CXX=' '
+	archive_cmds_need_lc_CXX=yes
+	# This is similar to how AIX traditionally builds it's shared libraries.
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
       fi
     fi
     ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    # see comment about different semantics on the GNU ld section
-    ld_shlibs=no
+  chorus*)
+    case $cc_basename in
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
     ;;
 
+
   cygwin* | mingw* | pw32*)
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec=' '
-    allow_undefined_flag=unsupported
-    # Tell ltmain to make .lib files, not .a files.
-    libext=lib
-    # FIXME: Setting linknames here is a bad hack.
-    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-    # The linker will automatically build a .lib file if we build a DLL.
-    old_archive_from_new_cmds='true'
-    # FIXME: Should let the user specify the lib program.
-    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
-    fix_srcfile_path='`cygpath -w "$srcfile"`'
-    ;;
+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+    # as there is no search path for DLLs.
+    hardcode_libdir_flag_spec_CXX='-L$libdir'
+    allow_undefined_flag_CXX=unsupported
+    always_export_symbols_CXX=no
+    enable_shared_with_static_runtimes_CXX=yes
+
+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      # If the export-symbols file already is a .def file (1st line
+      # is EXPORTS), use it as is; otherwise, prepend...
+      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname.def;
+      else
+	echo EXPORTS > $output_objdir/$soname.def;
+	cat $export_symbols >> $output_objdir/$soname.def;
+      fi~
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+    else
+      ld_shlibs_CXX=no
+    fi
+  ;;
+      darwin* | rhapsody*)
+        case "$host_os" in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+        esac
+      archive_cmds_need_lc_CXX=no
+      hardcode_direct_CXX=no
+      hardcode_automatic_CXX=yes
+      hardcode_shlibpath_var_CXX=unsupported
+      whole_archive_flag_spec_CXX=''
+      link_all_deplibs_CXX=yes
+
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
+      fi
+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      else
+          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_CXX=no
+          ;;
+      esac
+      fi
+        ;;
 
-  darwin* | rhapsody*)
-    case "$host_os" in
-    rhapsody* | darwin1.[012])
-      allow_undefined_flag='-undefined suppress'
+  dgux*)
+    case $cc_basename in
+      ec++)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      ghcx)
+	# Green Hills C++ Compiler
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  freebsd[12]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    ld_shlibs_CXX=no
+    ;;
+  freebsd-elf*)
+    archive_cmds_need_lc_CXX=no
+    ;;
+  freebsd* | kfreebsd*-gnu | dragonfly*)
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    ld_shlibs_CXX=yes
+    ;;
+  gnu*)
+    ;;
+  hpux9*)
+    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator_CXX=:
+    export_dynamic_flag_spec_CXX='${wl}-E'
+    hardcode_direct_CXX=yes
+    hardcode_minus_L_CXX=yes # Not in the search PATH,
+				# but as the default
+				# location of the library.
+
+    case $cc_basename in
+    CC)
+      # FIXME: insert proper C++ library support
+      ld_shlibs_CXX=no
       ;;
-    *) # Darwin 1.3 on
-      allow_undefined_flag='-flat_namespace -undefined suppress'
+    aCC)
+      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      #
+      # There doesn't appear to be a way to prevent this compiler from
+      # explicitly linking system object files so we need to strip them
+      # from the output so that they don't get included in the library
+      # dependencies.
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      ;;
+    *)
+      if test "$GXX" = yes; then
+        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+      fi
       ;;
     esac
-    # FIXME: Relying on posixy $() will cause problems for
-    #        cross-compilation, but unfortunately the echo tests do not
-    #        yet detect zsh echo's removal of \ escapes.
-    archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
-    # We need to add '_' to the symbols in $export_symbols first
-    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    whole_archive_flag_spec='-all_load $convenience'
     ;;
+  hpux10*|hpux11*)
+    if test $with_gnu_ld = no; then
+      case "$host_cpu" in
+      hppa*64*)
+	hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+	hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
+	hardcode_libdir_separator_CXX=:
+        ;;
+      ia64*)
+	hardcode_libdir_flag_spec_CXX='-L$libdir'
+        ;;
+      *)
+	hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_CXX=:
+	export_dynamic_flag_spec_CXX='${wl}-E'
+        ;;
+      esac
+    fi
+    case "$host_cpu" in
+    hppa*64*)
+      hardcode_direct_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      ;;
+    ia64*)
+      hardcode_direct_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      hardcode_minus_L_CXX=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+      ;;
+    *)
+      hardcode_direct_CXX=yes
+      hardcode_minus_L_CXX=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+      ;;
+    esac
 
-  freebsd1*)
-    ld_shlibs=no
+    case $cc_basename in
+      CC)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      aCC)
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+	  ;;
+	*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	esac
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test $with_gnu_ld = no; then
+	    case "$host_cpu" in
+	    ia64*|hppa*64*)
+	      archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+	      ;;
+	    *)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    esac
+	  fi
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC)
+	# SGI C++
+	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+	# Archives containing C++ object files must be created using
+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test "$with_gnu_ld" = no; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	  else
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+	  fi
+	fi
+	link_all_deplibs_CXX=yes
+	;;
+    esac
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator_CXX=:
     ;;
+  linux*)
+    case $cc_basename in
+      KCC)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	;;
+      icpc)
+	# Intel C++
+	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
+	archive_cmds_need_lc_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	;;
+      pgCC)
+        # Portland Group C++ compiler
+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 
-  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-  # support.  Future versions do this automatically, but an explicit c++rt0.o
-  # does not break anything, and helps significantly (at the cost of a little
-  # extra space).
-  freebsd2.2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
+	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+        ;;
+      cxx)
+	# Compaq C++
+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	runpath_var=LD_RUN_PATH
+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
     ;;
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+      wlarc=
+      hardcode_libdir_flag_spec_CXX='-R$libdir'
+      hardcode_direct_CXX=yes
+      hardcode_shlibpath_var_CXX=no
+    fi
+    # Workaround some broken pre-1.5 toolchains
+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+    ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    ld_shlibs_CXX=no
+    ;;
+  openbsd*)
+    hardcode_direct_CXX=yes
+    hardcode_shlibpath_var_CXX=no
+    archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+      export_dynamic_flag_spec_CXX='${wl}-E'
+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    fi
+    output_verbose_link_cmd='echo'
+    ;;
+  osf3*)
+    case $cc_basename in
+      KCC)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
-  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-  freebsd2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+
+	;;
+      RCC)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      cxx)
+	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
     ;;
+  osf4* | osf5*)
+    case $cc_basename in
+      KCC)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Archives containing C++ object files must be created using
+	# the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
+	;;
+      RCC)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      cxx)
+	allow_undefined_flag_CXX=' -expect_unresolved \*'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	  echo "-hidden">> $lib.exp~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
+	  $rm $lib.exp'
+
+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
 
-  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-  freebsd*)
-    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  sco*)
+    archive_cmds_need_lc_CXX=no
+    case $cc_basename in
+      CC)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC)
+	# Sun C++ 4.x
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      lcc)
+	# Lucid
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC)
+	# Sun C++ 4.2, 5.x and Centerline C++
+	no_undefined_flag_CXX=' -zdefs'
+	archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	hardcode_libdir_flag_spec_CXX='-R$libdir'
+	hardcode_shlibpath_var_CXX=no
+	case $host_os in
+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
+	  *)
+	    # The C++ compiler is used as linker so we must use $wl
+	    # flag to pass the commands to the underlying system
+	    # linker.
+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
+	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    ;;
+	esac
+	link_all_deplibs_CXX=yes
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	# Archives containing C++ object files must be created using
+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	;;
+      gcx)
+	# Green Hills C++ Compiler
+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	# The C++ compiler must be used to create the archive.
+	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	;;
+      *)
+	# GNU C++ compiler with Solaris linker
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  else
+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	    # platform.
+	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  fi
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	fi
+	;;
+    esac
     ;;
+  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
+    archive_cmds_need_lc_CXX=no
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC)
+	# NonStop-UX NCC 3.20
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+esac
+echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+echo "${ECHO_T}$ld_shlibs_CXX" >&6
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+GCC_CXX="$GXX"
+LD_CXX="$LD"
+
+
+cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  # The `*' in the case matches for architectures that use `case' in
+  # $output_verbose_cmd can trigger glob expansion during the loop
+  # eval without this substitution.
+  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
+
+  for p in `eval $output_verbose_link_cmd`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+	  || test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX="${prev}${p}"
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX="${prev}${p}"
+	 else
+	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX="$p"
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX="$p"
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$rm -f confest.$objext
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+
+lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
 
-  hpux9* | hpux10* | hpux11*)
     case $host_os in
-    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
-    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | os2* | pw32*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+	;;
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
+	;;
+      esac
+      ;;
+    *)
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
     esac
-    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_direct=yes
-    hardcode_minus_L=yes # Not in the search PATH, but as the default
-			 # location of the library.
-    export_dynamic_flag_spec='${wl}-E'
+  else
+    case $host_os in
+      aix4* | aix5*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
+	else
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68)
+	  # Green Hills C++ Compiler
+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case "$cc_basename" in
+           xlc*)
+           lt_prog_compiler_pic_CXX='-qnocommon'
+           lt_prog_compiler_wl_CXX='-Wl,'
+           ;;
+         esac
+       ;;
+      dgux*)
+	case $cc_basename in
+	  ec++)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | kfreebsd*-gnu | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+	    if test "$host_cpu" != ia64; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+	    case "$host_cpu" in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux*)
+	case $cc_basename in
+	  KCC)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  icpc* | ecpc*)
+	    # Intel C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC)
+	    # Portland Group C++ compiler.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  cxx)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      sco*)
+	case $cc_basename in
+	  CC)
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      unixware*)
+	;;
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
+	;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works_CXX=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:12354: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:12358: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s conftest.err; then
+       lt_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6
+
+if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
+else
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+case "$host_os" in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
     ;;
+esac
 
-  irix5* | irix6*)
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:12414: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:12418: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s out/conftest.err; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w .
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix4* | aix5*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
     else
-      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
     fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    link_all_deplibs=yes
     ;;
+  pw32*)
+    export_symbols_cmds_CXX="$ltdll_cmds"
+  ;;
+  cygwin* | mingw*)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
 
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+echo "${ECHO_T}$ld_shlibs_CXX" >&6
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_CXX
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+        allow_undefined_flag_CXX=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_CXX=no
+        else
+	  archive_cmds_need_lc_CXX=yes
+        fi
+        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     else
-      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
     fi
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
     ;;
 
-  newsos6)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_shlibpath_var=no
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
 
-  openbsd*)
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  *) # from 3.2 on
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case "$host_cpu" in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
     else
-      case "$host_os" in
-      openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_libdir_flag_spec='-R$libdir'
-        ;;
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
       *)
-        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-        ;;
+	shlibpath_overrides_runpath=yes
+	;;
       esac
-    fi
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" || \
+   test -n "$runpath_var_CXX" || \
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_CXX" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+     test "$hardcode_minus_L_CXX" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
+echo "${ECHO_T}$hardcode_action_CXX" >&6
+
+if test "$hardcode_action_CXX" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+striplib=
+old_striplib=
+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+       else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+       ;;
+   *)
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
     ;;
+  esac
+fi
+
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
 
-  os2*)
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    allow_undefined_flag=unsupported
-    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
     ;;
 
-  osf3*)
-    if test "$GCC" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
+  mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+   ;;
+
+  *)
+    echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+if test "${ac_cv_func_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define shl_load innocuous_shl_load
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef shl_load
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != shl_load;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+if test $ac_cv_func_shl_load = yes; then
+  lt_cv_dlopen="shl_load"
+else
+  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+int
+main ()
+{
+shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+if test $ac_cv_lib_dld_shl_load = yes; then
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+else
+  echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+if test "${ac_cv_func_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define dlopen innocuous_dlopen
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef dlopen
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != dlopen;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+if test $ac_cv_func_dlopen = yes; then
+  lt_cv_dlopen="dlopen"
+else
+  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_svld_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+if test $ac_cv_lib_svld_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dld_link ();
+int
+main ()
+{
+dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_dld_link=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_dld_link=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+if test $ac_cv_lib_dld_dld_link = yes; then
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
     ;;
+  esac
 
-  osf4* | osf5*)	# as osf3* with the addition of -msym flag
-    if test "$GCC" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 13777 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      LDFLAGS="$LDFLAGS $link_static_flag"
+      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 13875 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
 
-      #Both c and cxx compiler support -rpath directly
-      hardcode_libdir_flag_spec='-rpath $libdir'
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
     fi
-    hardcode_libdir_separator=:
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
     ;;
+  esac
 
-  sco3.2v5*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    runpath_var=LD_RUN_PATH
-    hardcode_runpath_var=yes
-    export_dynamic_flag_spec='${wl}-Bexport'
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_CXX \
+    CC_CXX \
+    LD_CXX \
+    lt_prog_compiler_wl_CXX \
+    lt_prog_compiler_pic_CXX \
+    lt_prog_compiler_static_CXX \
+    lt_prog_compiler_no_builtin_flag_CXX \
+    export_dynamic_flag_spec_CXX \
+    thread_safe_flag_spec_CXX \
+    whole_archive_flag_spec_CXX \
+    enable_shared_with_static_runtimes_CXX \
+    old_archive_cmds_CXX \
+    old_archive_from_new_cmds_CXX \
+    predep_objects_CXX \
+    postdep_objects_CXX \
+    predeps_CXX \
+    postdeps_CXX \
+    compiler_lib_search_path_CXX \
+    archive_cmds_CXX \
+    archive_expsym_cmds_CXX \
+    postinstall_cmds_CXX \
+    postuninstall_cmds_CXX \
+    old_archive_from_expsyms_cmds_CXX \
+    allow_undefined_flag_CXX \
+    no_undefined_flag_CXX \
+    export_symbols_cmds_CXX \
+    hardcode_libdir_flag_spec_CXX \
+    hardcode_libdir_flag_spec_ld_CXX \
+    hardcode_libdir_separator_CXX \
+    hardcode_automatic_CXX \
+    module_cmds_CXX \
+    module_expsym_cmds_CXX \
+    lt_cv_prog_compiler_c_o_CXX \
+    exclude_expsyms_CXX \
+    include_expsyms_CXX; do
+
+    case $var in
+    old_archive_cmds_CXX | \
+    old_archive_from_new_cmds_CXX | \
+    archive_cmds_CXX | \
+    archive_expsym_cmds_CXX | \
+    module_cmds_CXX | \
+    module_expsym_cmds_CXX | \
+    old_archive_from_expsyms_cmds_CXX | \
+    export_symbols_cmds_CXX | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
     ;;
+  esac
 
-  solaris*)
-    # gcc --version < 3.0 without binutils cannot create self contained
-    # shared libraries reliably, requiring libgcc.a to resolve some of
-    # the object symbols generated in some cases.  Libraries that use
-    # assert need libgcc.a to resolve __eprintf, for example.  Linking
-    # a copy of libgcc.a into every shared library to guarantee resolving
-    # such symbols causes other problems:  According to Tim Van Holder
-    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
-    # (to the application) exception stack for one thing.
-    no_undefined_flag=' -z defs'
-    if test "$GCC" = yes; then
-      case `$CC --version 2>/dev/null` in
-      [12].*)
-	cat <<EOF 1>&2
+cfgfile="$ofile"
 
-*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
-*** create self contained shared libraries on Solaris systems, without
-*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
-*** -no-undefined support, which will at least allow you to build shared
-*** libraries.  However, you may find that when you link such libraries
-*** into an application without using GCC, you have to manually add
-*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
-*** upgrade to a newer version of GCC.  Another option is to rebuild your
-*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
 
-EOF
-        no_undefined_flag=
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# A language-specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_CXX
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_CXX
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_CXX
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_CXX
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_CXX
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_CXX"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      F77)
+	if test -n "$F77" && test "X$F77" != "Xno"; then
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+
+archive_cmds_need_lc_F77=no
+allow_undefined_flag_F77=
+always_export_symbols_F77=no
+archive_expsym_cmds_F77=
+export_dynamic_flag_spec_F77=
+hardcode_direct_F77=no
+hardcode_libdir_flag_spec_F77=
+hardcode_libdir_flag_spec_ld_F77=
+hardcode_libdir_separator_F77=
+hardcode_minus_L_F77=no
+hardcode_automatic_F77=no
+module_cmds_F77=
+module_expsym_cmds_F77=
+link_all_deplibs_F77=unknown
+old_archive_cmds_F77=$old_archive_cmds
+no_undefined_flag_F77=
+whole_archive_flag_spec_F77=
+enable_shared_with_static_runtimes_F77=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+objext_F77=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="      program t\n      end\n"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+compiler_F77=$CC
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
+echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+aix4* | aix5*)
+  test "$enable_shared" = yes && enable_static=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6
+
+test "$ld_shlibs_F77" = no && can_build_shared=no
+
+GCC_F77="$G77"
+LD_F77="$LD"
+
+lt_prog_compiler_wl_F77=
+lt_prog_compiler_pic_F77=
+lt_prog_compiler_static_F77=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_F77='-Wl,'
+    lt_prog_compiler_static_F77='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_F77='-fno-common'
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_F77=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_F77=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='-fPIC'
 	;;
       esac
-    fi
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      lt_prog_compiler_pic_F77='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
-    solaris2.[0-5] | solaris2.[0-5].*) ;;
-    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+    aix*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      else
+	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case "$cc_basename" in
+         xlc*)
+         lt_prog_compiler_pic_F77='-qnocommon'
+         lt_prog_compiler_wl_F77='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-KPIC'
+	lt_prog_compiler_static_F77='-static'
+        ;;
+      pgcc | pgf77 | pgf90)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-fpic'
+	lt_prog_compiler_static_F77='-static'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_F77='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_F77='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    sco3.2v5*)
+      lt_prog_compiler_pic_F77='-Kpic'
+      lt_prog_compiler_static_F77='-dn'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_F77='-Qoption ld '
+      lt_prog_compiler_pic_F77='-PIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_F77='-Kconform_pic'
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_F77='-pic'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
     esac
-    link_all_deplibs=yes
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_F77"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works_F77=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_F77"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:14730: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:14734: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s conftest.err; then
+       lt_prog_compiler_pic_works_F77=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6
+
+if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
+    case $lt_prog_compiler_pic_F77 in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
+     esac
+else
+    lt_prog_compiler_pic_F77=
+     lt_prog_compiler_can_build_shared_F77=no
+fi
+
+fi
+case "$host_os" in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_F77=
     ;;
+  *)
+    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
+    ;;
+esac
 
-  sunos4*)
-    if test "x$host_vendor" = xsequent; then
-      # Use $CC to link under sequent, because it throws in some extra .o
-      # files that make .init and .fini sections work.
-      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-    else
-      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o_F77=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:14790: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:14794: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s out/conftest.err; then
+       lt_cv_prog_compiler_c_o_F77=yes
+     fi
+   fi
+   chmod u+w .
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  runpath_var=
+  allow_undefined_flag_F77=
+  enable_shared_with_static_runtimes_F77=no
+  archive_cmds_F77=
+  archive_expsym_cmds_F77=
+  old_archive_From_new_cmds_F77=
+  old_archive_from_expsyms_cmds_F77=
+  export_dynamic_flag_spec_F77=
+  whole_archive_flag_spec_F77=
+  thread_safe_flag_spec_F77=
+  hardcode_libdir_flag_spec_F77=
+  hardcode_libdir_flag_spec_ld_F77=
+  hardcode_libdir_separator_F77=
+  hardcode_direct_F77=no
+  hardcode_minus_L_F77=no
+  hardcode_shlibpath_var_F77=unsupported
+  link_all_deplibs_F77=unknown
+  hardcode_automatic_F77=no
+  module_cmds_F77=
+  module_expsym_cmds_F77=
+  always_export_symbols_F77=no
+  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_F77=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
     fi
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
     ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_F77=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_F77=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs_F77=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_F77=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=no
+      enable_shared_with_static_runtimes_F77=yes
+      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris* | sysv5*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_F77=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    sunos4*)
+      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
 
-  sysv4)
-    if test "x$host_vendor" = xsno; then
-      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes # is this really true???
+  linux*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      tmp_addflag=
+      case $CC,$host_cpu in
+      pgf77* | pgf90* )			# Portland Group f77 and f90 compilers
+        tmp_addflag=' -fpic' ;;
+      ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+        tmp_addflag=' -i_dynamic' ;;
+      efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+        tmp_addflag=' -i_dynamic -nofor_main' ;;
+      ifc* | ifort*)			# Intel Fortran compiler
+      	tmp_addflag=' -nofor_main' ;;
+      esac
+      archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      supports_anon_versioning=no
+      case `$LD -v 2>/dev/null` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+        *\ 2.11.*) ;; # other 2.11 versions
+        *) supports_anon_versioning=yes ;;
+      esac
+      if test $supports_anon_versioning = yes; then
+        archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+        $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+      else
+        archive_expsym_cmds_F77=$archive_cmds_F77
+      fi
     else
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+      ld_shlibs_F77=no
     fi
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
     ;;
 
-  sysv4.3*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    export_dynamic_flag_spec='-Bexport'
-    ;;
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+    esac
 
-  sysv5*)
-    no_undefined_flag=' -z text'
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec=
-    hardcode_shlibpath_var=no
-    runpath_var='LD_RUN_PATH'
-    ;;
+    if test "$ld_shlibs_F77" = yes; then
+      runpath_var=LD_RUN_PATH
+      hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
+      export_dynamic_flag_spec_F77='${wl}--export-dynamic'
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+ 	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_F77=
+      fi
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=yes
+      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_F77=yes
+      if test "$GCC" = yes && test -z "$link_static_flag"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_F77=unsupported
+      fi
+      ;;
 
-  uts4*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	esac
 
-  dgux*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
 
-  sysv4*MP*)
-    if test -d /usr/nec; then
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_F77=''
+      hardcode_direct_F77=yes
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  hardcode_direct_F77=yes
+	  else
+  	  # We have old collect2
+  	  hardcode_direct_F77=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L_F77=yes
+  	  hardcode_libdir_flag_spec_F77='-L$libdir'
+  	  hardcode_libdir_separator_F77=
+	  fi
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+  	if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+  	fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_F77=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_F77='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_F77="-z nodefs"
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_F77=' ${wl}-bernotok'
+	  allow_undefined_flag_F77=' ${wl}-berok'
+	  # -bexpall does not export symbols beginning with underscore (_)
+	  always_export_symbols_F77=yes
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec_F77=' '
+	  archive_cmds_need_lc_F77=yes
+	  # This is similar to how AIX traditionally builds it's shared libraries.
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs_F77=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_F77=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec_F77=' '
+      allow_undefined_flag_F77=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds_F77='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes_F77=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case "$host_os" in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc_F77=no
+      hardcode_direct_F77=no
+      hardcode_automatic_F77=yes
+      hardcode_shlibpath_var_F77=unsupported
+      whole_archive_flag_spec_F77=''
+      link_all_deplibs_F77=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_F77=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs_F77=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | kfreebsd*-gnu | dragonfly*)
+      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_direct_F77=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-E'
+      ;;
+
+    hpux10* | hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  ;;
+	*)
+	  archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	case "$host_cpu" in
+	hppa*64*)
+	  hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
+	  hardcode_libdir_separator_F77=:
+	  hardcode_direct_F77=no
+	  hardcode_shlibpath_var_F77=no
+	  ;;
+	ia64*)
+	  hardcode_libdir_flag_spec_F77='-L$libdir'
+	  hardcode_direct_F77=no
+	  hardcode_shlibpath_var_F77=no
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_F77=yes
+	  ;;
+	*)
+	  hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	  hardcode_libdir_separator_F77=:
+	  hardcode_direct_F77=yes
+	  export_dynamic_flag_spec_F77='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_F77=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      link_all_deplibs_F77=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    newsos6)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    openbsd*)
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_F77='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	   archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   hardcode_libdir_flag_spec_F77='-R$libdir'
+	   ;;
+	 *)
+	   archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+      allow_undefined_flag_F77=unsupported
+      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_F77='-rpath $libdir'
+      fi
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    sco3.2v5*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_F77=no
+      export_dynamic_flag_spec_F77='${wl}-Bexport'
       runpath_var=LD_RUN_PATH
       hardcode_runpath_var=yes
-      ld_shlibs=yes
+      ;;
+
+    solaris*)
+      no_undefined_flag_F77=' -z text'
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_shlibpath_var_F77=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+	whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;;
+      esac
+      link_all_deplibs_F77=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_F77='$CC -r -o $output$reload_objs'
+	  hardcode_direct_F77=no
+        ;;
+	motorola)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_F77=no
+      export_dynamic_flag_spec_F77='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_F77=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_F77=yes
+      fi
+      ;;
+
+    sysv4.2uw2*)
+      archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_runpath_var=yes
+      runpath_var=LD_RUN_PATH
+      ;;
+
+   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
+      no_undefined_flag_F77='${wl}-z ${wl}text'
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv5*)
+      no_undefined_flag_F77=' -z text'
+      # $CC -shared without GNU ld will not create a library from C++
+      # object files and a static libstdc++, better avoid it by now
+      archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      hardcode_libdir_flag_spec_F77=
+      hardcode_shlibpath_var_F77=no
+      runpath_var='LD_RUN_PATH'
+      ;;
+
+    uts4*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      ld_shlibs_F77=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
+echo "${ECHO_T}$ld_shlibs_F77" >&6
+test "$ld_shlibs_F77" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_F77" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_F77=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_F77 in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_F77
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
+        allow_undefined_flag_F77=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_F77=no
+        else
+	  archive_cmds_need_lc_F77=yes
+        fi
+        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
     fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
     ;;
 
-  sysv4.2uw2*)
-    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=no
-    hardcode_shlibpath_var=no
-    hardcode_runpath_var=yes
-    runpath_var=LD_RUN_PATH
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
 
-  sysv5uw7* | unixware7*)
-    no_undefined_flag='${wl}-z ${wl}text'
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  *) # from 3.2 on
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case "$host_cpu" in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
     else
-      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
     fi
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
     ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
 
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
   *)
-    ld_shlibs=no
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
     ;;
   esac
-fi
-echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6
-test "$ld_shlibs" = no && can_build_shared=no
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
 
-# Check hardcoding attributes.
 echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var"; then
+hardcode_action_F77=
+if test -n "$hardcode_libdir_flag_spec_F77" || \
+   test -n "$runpath_var_F77" || \
+   test "X$hardcode_automatic_F77" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no &&
+  if test "$hardcode_direct_F77" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$hardcode_shlibpath_var" != no &&
-     test "$hardcode_minus_L" != no; then
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
+     test "$hardcode_minus_L_F77" != no; then
     # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
+    hardcode_action_F77=relink
   else
     # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
+    hardcode_action_F77=immediate
   fi
 else
   # We cannot hardcode anything, or else we can only hardcode existing
   # directories.
-  hardcode_action=unsupported
+  hardcode_action_F77=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
+echo "${ECHO_T}$hardcode_action_F77" >&6
+
+if test "$hardcode_action_F77" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
 fi
-echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6
 
 striplib=
 old_striplib=
@@ -7833,19 +16343,1810 @@ if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
   echo "$as_me:$LINENO: result: yes" >&5
 echo "${ECHO_T}yes" >&6
 else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+       else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+       ;;
+   *)
   echo "$as_me:$LINENO: result: no" >&5
 echo "${ECHO_T}no" >&6
+    ;;
+  esac
 fi
 
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
-# PORTME Fill in your ld.so characteristics
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_F77 \
+    CC_F77 \
+    LD_F77 \
+    lt_prog_compiler_wl_F77 \
+    lt_prog_compiler_pic_F77 \
+    lt_prog_compiler_static_F77 \
+    lt_prog_compiler_no_builtin_flag_F77 \
+    export_dynamic_flag_spec_F77 \
+    thread_safe_flag_spec_F77 \
+    whole_archive_flag_spec_F77 \
+    enable_shared_with_static_runtimes_F77 \
+    old_archive_cmds_F77 \
+    old_archive_from_new_cmds_F77 \
+    predep_objects_F77 \
+    postdep_objects_F77 \
+    predeps_F77 \
+    postdeps_F77 \
+    compiler_lib_search_path_F77 \
+    archive_cmds_F77 \
+    archive_expsym_cmds_F77 \
+    postinstall_cmds_F77 \
+    postuninstall_cmds_F77 \
+    old_archive_from_expsyms_cmds_F77 \
+    allow_undefined_flag_F77 \
+    no_undefined_flag_F77 \
+    export_symbols_cmds_F77 \
+    hardcode_libdir_flag_spec_F77 \
+    hardcode_libdir_flag_spec_ld_F77 \
+    hardcode_libdir_separator_F77 \
+    hardcode_automatic_F77 \
+    module_cmds_F77 \
+    module_expsym_cmds_F77 \
+    lt_cv_prog_compiler_c_o_F77 \
+    exclude_expsyms_F77 \
+    include_expsyms_F77; do
+
+    case $var in
+    old_archive_cmds_F77 | \
+    old_archive_from_new_cmds_F77 | \
+    archive_cmds_F77 | \
+    archive_expsym_cmds_F77 | \
+    module_cmds_F77 | \
+    module_expsym_cmds_F77 | \
+    old_archive_from_expsyms_cmds_F77 | \
+    export_symbols_cmds_F77 | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_F77
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# A language-specific compiler.
+CC=$lt_compiler_F77
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_F77
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_F77
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_F77
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_F77
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
+
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_F77
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_F77
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_F77
+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_F77
+module_expsym_cmds=$lt_module_expsym_cmds_F77
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_F77
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_F77
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_F77
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_F77
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_F77
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_F77
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_F77
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_F77
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_F77
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_F77
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_F77
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_F77
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_F77"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_F77
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_F77
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_F77
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_F77
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      GCJ)
+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+
+
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+objext_GCJ=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+compiler_GCJ=$CC
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+archive_cmds_need_lc_GCJ=no
+
+
+lt_prog_compiler_no_builtin_flag_GCJ=
+
+if test "$GCC" = yes; then
+  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:16846: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:16850: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s conftest.err; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+lt_prog_compiler_wl_GCJ=
+lt_prog_compiler_pic_GCJ=
+lt_prog_compiler_static_GCJ=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_GCJ='-Wl,'
+    lt_prog_compiler_static_GCJ='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_GCJ='-fno-common'
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_GCJ=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_GCJ=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GCJ='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      lt_prog_compiler_pic_GCJ='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      else
+	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case "$cc_basename" in
+         xlc*)
+         lt_prog_compiler_pic_GCJ='-qnocommon'
+         lt_prog_compiler_wl_GCJ='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case "$host_cpu" in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GCJ='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-KPIC'
+	lt_prog_compiler_static_GCJ='-static'
+        ;;
+      pgcc | pgf77 | pgf90)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-fpic'
+	lt_prog_compiler_static_GCJ='-static'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_GCJ='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_GCJ='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    sco3.2v5*)
+      lt_prog_compiler_pic_GCJ='-Kpic'
+      lt_prog_compiler_static_GCJ='-dn'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_GCJ='-Qoption ld '
+      lt_prog_compiler_pic_GCJ='-PIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_GCJ='-Kconform_pic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      fi
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_GCJ='-pic'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_GCJ"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works_GCJ=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:17101: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:17105: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s conftest.err; then
+       lt_prog_compiler_pic_works_GCJ=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6
+
+if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
+    case $lt_prog_compiler_pic_GCJ in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
+     esac
+else
+    lt_prog_compiler_pic_GCJ=
+     lt_prog_compiler_can_build_shared_GCJ=no
+fi
+
+fi
+case "$host_os" in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_GCJ=
+    ;;
+  *)
+    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
+    ;;
+esac
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o_GCJ=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:17161: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:17165: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test ! -s out/conftest.err; then
+       lt_cv_prog_compiler_c_o_GCJ=yes
+     fi
+   fi
+   chmod u+w .
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  runpath_var=
+  allow_undefined_flag_GCJ=
+  enable_shared_with_static_runtimes_GCJ=no
+  archive_cmds_GCJ=
+  archive_expsym_cmds_GCJ=
+  old_archive_From_new_cmds_GCJ=
+  old_archive_from_expsyms_cmds_GCJ=
+  export_dynamic_flag_spec_GCJ=
+  whole_archive_flag_spec_GCJ=
+  thread_safe_flag_spec_GCJ=
+  hardcode_libdir_flag_spec_GCJ=
+  hardcode_libdir_flag_spec_ld_GCJ=
+  hardcode_libdir_separator_GCJ=
+  hardcode_direct_GCJ=no
+  hardcode_minus_L_GCJ=no
+  hardcode_shlibpath_var_GCJ=unsupported
+  link_all_deplibs_GCJ=unknown
+  hardcode_automatic_GCJ=no
+  module_cmds_GCJ=
+  module_expsym_cmds_GCJ=
+  always_export_symbols_GCJ=no
+  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_GCJ=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_GCJ=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_GCJ=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs_GCJ=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_GCJ=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      allow_undefined_flag_GCJ=unsupported
+      always_export_symbols_GCJ=no
+      enable_shared_with_static_runtimes_GCJ=yes
+      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris* | sysv5*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_GCJ=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    sunos4*)
+      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+  linux*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      tmp_addflag=
+      case $CC,$host_cpu in
+      pgf77* | pgf90* )			# Portland Group f77 and f90 compilers
+        tmp_addflag=' -fpic' ;;
+      ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+        tmp_addflag=' -i_dynamic' ;;
+      efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+        tmp_addflag=' -i_dynamic -nofor_main' ;;
+      ifc* | ifort*)			# Intel Fortran compiler
+      	tmp_addflag=' -nofor_main' ;;
+      esac
+      archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      supports_anon_versioning=no
+      case `$LD -v 2>/dev/null` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+        *\ 2.11.*) ;; # other 2.11 versions
+        *) supports_anon_versioning=yes ;;
+      esac
+      if test $supports_anon_versioning = yes; then
+        archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+        $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+      else
+        archive_expsym_cmds_GCJ=$archive_cmds_GCJ
+      fi
+    else
+      ld_shlibs_GCJ=no
+    fi
+    ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_GCJ" = yes; then
+      runpath_var=LD_RUN_PATH
+      hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
+      export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+ 	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_GCJ=
+      fi
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_GCJ=unsupported
+      always_export_symbols_GCJ=yes
+      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_GCJ=yes
+      if test "$GCC" = yes && test -z "$link_static_flag"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_GCJ=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_GCJ=''
+      hardcode_direct_GCJ=yes
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  hardcode_direct_GCJ=yes
+	  else
+  	  # We have old collect2
+  	  hardcode_direct_GCJ=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L_GCJ=yes
+  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
+  	  hardcode_libdir_separator_GCJ=
+	  fi
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+  	if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+  	fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_GCJ=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_GCJ='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_GCJ="-z nodefs"
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_GCJ=' ${wl}-bernotok'
+	  allow_undefined_flag_GCJ=' ${wl}-berok'
+	  # -bexpall does not export symbols beginning with underscore (_)
+	  always_export_symbols_GCJ=yes
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec_GCJ=' '
+	  archive_cmds_need_lc_GCJ=yes
+	  # This is similar to how AIX traditionally builds it's shared libraries.
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs_GCJ=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_GCJ=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec_GCJ=' '
+      allow_undefined_flag_GCJ=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds_GCJ='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes_GCJ=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case "$host_os" in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc_GCJ=no
+      hardcode_direct_GCJ=no
+      hardcode_automatic_GCJ=yes
+      hardcode_shlibpath_var_GCJ=unsupported
+      whole_archive_flag_spec_GCJ=''
+      link_all_deplibs_GCJ=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_GCJ=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs_GCJ=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | kfreebsd*-gnu | dragonfly*)
+      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      hardcode_direct_GCJ=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      ;;
+
+    hpux10* | hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  ;;
+	*)
+	  archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	case "$host_cpu" in
+	hppa*64*)
+	  hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
+	  hardcode_libdir_separator_GCJ=:
+	  hardcode_direct_GCJ=no
+	  hardcode_shlibpath_var_GCJ=no
+	  ;;
+	ia64*)
+	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
+	  hardcode_direct_GCJ=no
+	  hardcode_shlibpath_var_GCJ=no
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_GCJ=yes
+	  ;;
+	*)
+	  hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	  hardcode_libdir_separator_GCJ=:
+	  hardcode_direct_GCJ=yes
+	  export_dynamic_flag_spec_GCJ='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_GCJ=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    newsos6)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    openbsd*)
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_GCJ='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	   archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   hardcode_libdir_flag_spec_GCJ='-R$libdir'
+	   ;;
+	 *)
+	   archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+      allow_undefined_flag_GCJ=unsupported
+      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
+      fi
+      hardcode_libdir_separator_GCJ=:
+      ;;
+
+    sco3.2v5*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_GCJ=no
+      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ;;
+
+    solaris*)
+      no_undefined_flag_GCJ=' -z text'
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+	whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;;
+      esac
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GCJ=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
+	  hardcode_direct_GCJ=no
+        ;;
+	motorola)
+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_GCJ=no
+      export_dynamic_flag_spec_GCJ='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_GCJ=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_GCJ=yes
+      fi
+      ;;
+
+    sysv4.2uw2*)
+      archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_runpath_var=yes
+      runpath_var=LD_RUN_PATH
+      ;;
+
+   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
+      no_undefined_flag_GCJ='${wl}-z ${wl}text'
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv5*)
+      no_undefined_flag_GCJ=' -z text'
+      # $CC -shared without GNU ld will not create a library from C++
+      # object files and a static libstdc++, better avoid it by now
+      archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      hardcode_libdir_flag_spec_GCJ=
+      hardcode_shlibpath_var_GCJ=no
+      runpath_var='LD_RUN_PATH'
+      ;;
+
+    uts4*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    *)
+      ld_shlibs_GCJ=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
+echo "${ECHO_T}$ld_shlibs_GCJ" >&6
+test "$ld_shlibs_GCJ" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_GCJ" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_GCJ=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_GCJ in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_GCJ
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
+        allow_undefined_flag_GCJ=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_GCJ=no
+        else
+	  archive_cmds_need_lc_GCJ=yes
+        fi
+        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
 echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
+shrext_cmds=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -7855,23 +18156,45 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
 
 case $host_os in
 aix3*)
   version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
-  # AIX has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
 aix4* | aix5*)
   version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
   if test "$host_cpu" = ia64; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
@@ -7881,29 +18204,28 @@ aix4* | aix5*)
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.[01] | aix4.[01].*)
-	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	     echo ' yes '
-	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	  :
-	else
-	  can_build_shared=no
-	fi
-	;;
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can
-    # not hardcode correct soname into executable. Probably we can
-    # add versioning support to collect2, so additional links can
-    # be useful in future.
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
     if test "$aix_use_runtimelinking" = yes; then
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     else
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
       library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
+      soname_spec='${libname}${release}${shared_ext}$major'
     fi
     shlibpath_var=LIBPATH
   fi
@@ -7912,25 +18234,24 @@ aix4* | aix5*)
 amigaos*)
   library_names_spec='$libname.ixlibrary $libname.a'
   # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
   ;;
 
 beos*)
-  library_names_spec='${libname}.so'
+  library_names_spec='${libname}${shared_ext}'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
   sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  export_dynamic_flag_spec=-rdynamic
   # the default ld.so.conf also contains /usr/contrib/lib and
   # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
   # libtool to hard-code these into programs
@@ -7938,29 +18259,55 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
+  shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
+
   case $GCC,$host_os in
-  yes,cygwin*)
+  yes,cygwin* | yes,mingw* | yes,pw32*)
     library_names_spec='$libname.dll.a'
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
     ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
-    ;;
+
   *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
   esac
   dynamic_linker='Win32 ld.exe'
@@ -7973,30 +18320,58 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
   ;;
 
 freebsd1*)
   dynamic_linker=no
   ;;
 
-freebsd*)
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
   objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
   esac
@@ -8005,7 +18380,11 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  *)
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  *) # from 3.2 on
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
@@ -8016,8 +18395,8 @@ gnu*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   hardcode_into_libs=yes
   ;;
@@ -8025,33 +18404,75 @@ gnu*)
 hpux9* | hpux10* | hpux11*)
   # Give a soname corresponding to the major version so that dld.sl refuses to
   # link against other versions.
-  dynamic_linker="$host_os dld.sl"
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  shlibpath_var=SHLIB_PATH
-  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-  soname_spec='${libname}${release}.sl$major'
+  case "$host_cpu" in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555.
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-irix5* | irix6*)
-  version_type=irix
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
   case $host_os in
-  irix5*)
+  irix5* | nonstopux*)
     libsuff= shlibsuff=
     ;;
   *)
     case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
     *) libsuff= shlibsuff= libmagic=never-match;;
     esac
     ;;
@@ -8060,20 +18481,21 @@ irix5* | irix6*)
   shlibpath_overrides_runpath=no
   sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
   sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
   ;;
 
 # No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+linux*oldld* | linux*aout* | linux*coff*)
   dynamic_linker=no
   ;;
 
 # This must be Linux ELF.
-linux-gnu*)
+linux*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -8082,6 +18504,12 @@ linux-gnu*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
   # We used to test for /lib/ld.so.1 and disable shared libraries on
   # powerpc, because MkLinux only supported shared libraries with the
   # GNU dynamic linker.  Since this was broken with cross compilers,
@@ -8091,17 +18519,29 @@ linux-gnu*)
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -8111,7 +18551,17 @@ netbsd*)
 
 newsos6)
   version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -8120,36 +18570,38 @@ openbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
   if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case "$host_os" in
-    openbsd2.[89] | openbsd2.[89].*)
-      shlibpath_overrides_runpath=no
-      ;;
-    *)
-      shlibpath_overrides_runpath=yes
-      ;;
-    esac
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
   else
     shlibpath_overrides_runpath=yes
   fi
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
   ;;
 
 os2*)
   libname_spec='$name'
+  shrext_cmds=".dll"
   need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
+  library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
   shlibpath_var=LIBPATH
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
+  need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
@@ -8157,8 +18609,8 @@ osf3* | osf4* | osf5*)
 
 sco3.2v5*)
   version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -8166,8 +18618,8 @@ solaris*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -8177,7 +18629,7 @@ solaris*)
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
@@ -8189,12 +18641,18 @@ sunos4*)
 
 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
       shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
       ;;
     motorola)
       need_lib_prefix=no
@@ -8205,31 +18663,22 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   esac
   ;;
 
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
 sysv4*MP*)
   if test -d /usr/nec ;then
     version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
 *)
   dynamic_linker=no
   ;;
@@ -8238,44 +18687,35 @@ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
 echo "${ECHO_T}$dynamic_linker" >&6
 test "$dynamic_linker" = no && can_build_shared=no
 
-# Report the final consequences.
-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6
-
-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_GCJ=
+if test -n "$hardcode_libdir_flag_spec_GCJ" || \
+   test -n "$runpath_var_GCJ" || \
+   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
 
-aix4*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_GCJ" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
+     test "$hardcode_minus_L_GCJ" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_GCJ=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_GCJ=immediate
   fi
-  ;;
-esac
-echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6
-
-echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_GCJ=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
+echo "${ECHO_T}$hardcode_action_GCJ" >&6
 
-if test "$hardcode_action" = relink; then
+if test "$hardcode_action_GCJ" = relink; then
   # Fast installation is not supported
   enable_fast_install=no
 elif test "$shlibpath_overrides_runpath" = yes ||
@@ -8284,9 +18724,33 @@ elif test "$shlibpath_overrides_runpath" = yes ||
   enable_fast_install=needless
 fi
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+striplib=
+old_striplib=
+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+       else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+       ;;
+   *)
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+    ;;
+  esac
 fi
 
 if test "x$enable_dlopen" != xyes; then
@@ -8304,11 +18768,94 @@ else
     lt_cv_dlopen_self=yes
     ;;
 
-  cygwin* | mingw* | pw32*)
+  mingw* | pw32*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
    ;;
 
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+   ;;
+
   *)
     echo "$as_me:$LINENO: checking for shl_load" >&5
 echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
@@ -8792,7 +19339,7 @@ fi
   case $lt_cv_dlopen in
   dlopen)
     save_CPPFLAGS="$CPPFLAGS"
-        test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
     save_LDFLAGS="$LDFLAGS"
     eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
@@ -8808,10 +19355,10 @@ else
   	  if test "$cross_compiling" = yes; then :
   lt_cv_dlopen_self=cross
 else
-    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 8814 "configure"
+#line 19361 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -8906,10 +19453,10 @@ else
   	  if test "$cross_compiling" = yes; then :
   lt_cv_dlopen_self_static=cross
 else
-    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 8912 "configure"
+#line 19459 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -9013,109 +19560,528 @@ echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
 fi
 
 
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $archive_cmds in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-    if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  $rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_GCJ \
+    CC_GCJ \
+    LD_GCJ \
+    lt_prog_compiler_wl_GCJ \
+    lt_prog_compiler_pic_GCJ \
+    lt_prog_compiler_static_GCJ \
+    lt_prog_compiler_no_builtin_flag_GCJ \
+    export_dynamic_flag_spec_GCJ \
+    thread_safe_flag_spec_GCJ \
+    whole_archive_flag_spec_GCJ \
+    enable_shared_with_static_runtimes_GCJ \
+    old_archive_cmds_GCJ \
+    old_archive_from_new_cmds_GCJ \
+    predep_objects_GCJ \
+    postdep_objects_GCJ \
+    predeps_GCJ \
+    postdeps_GCJ \
+    compiler_lib_search_path_GCJ \
+    archive_cmds_GCJ \
+    archive_expsym_cmds_GCJ \
+    postinstall_cmds_GCJ \
+    postuninstall_cmds_GCJ \
+    old_archive_from_expsyms_cmds_GCJ \
+    allow_undefined_flag_GCJ \
+    no_undefined_flag_GCJ \
+    export_symbols_cmds_GCJ \
+    hardcode_libdir_flag_spec_GCJ \
+    hardcode_libdir_flag_spec_ld_GCJ \
+    hardcode_libdir_separator_GCJ \
+    hardcode_automatic_GCJ \
+    module_cmds_GCJ \
+    module_expsym_cmds_GCJ \
+    lt_cv_prog_compiler_c_o_GCJ \
+    exclude_expsyms_GCJ \
+    include_expsyms_GCJ; do
 
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$lt_cv_prog_cc_wl
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      save_allow_undefined_flag=$allow_undefined_flag
-      allow_undefined_flag=
-      if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-      then
-	lt_cv_archive_cmds_need_lc=no
-      else
-	lt_cv_archive_cmds_need_lc=yes
-      fi
-      allow_undefined_flag=$save_allow_undefined_flag
-    else
-      cat conftest.err 1>&5
-    fi
-fi
+    case $var in
+    old_archive_cmds_GCJ | \
+    old_archive_from_new_cmds_GCJ | \
+    archive_cmds_GCJ | \
+    archive_expsym_cmds_GCJ | \
+    module_cmds_GCJ | \
+    module_expsym_cmds_GCJ | \
+    old_archive_from_expsyms_cmds_GCJ | \
+    export_symbols_cmds_GCJ | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
 
-    echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5
-echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
     ;;
   esac
-fi
-need_lc=${lt_cv_archive_cmds_need_lc-yes}
 
-# The second clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  :
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_GCJ
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# A language-specific compiler.
+CC=$lt_compiler_GCJ
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_GCJ
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_GCJ
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_GCJ
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_GCJ
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
+
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_GCJ
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_GCJ
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_GCJ
+archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_GCJ
+module_expsym_cmds=$lt_module_expsym_cmds_GCJ
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_GCJ
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_GCJ
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_GCJ
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_GCJ
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_GCJ
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_GCJ
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_GCJ
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_GCJ
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_GCJ
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_GCJ
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_GCJ
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_GCJ"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_GCJ
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_GCJ
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_GCJ
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_GCJ
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
 else
   # If there is no Makefile yet, we rely on a make rule to execute
   # `config.status --recheck' to rerun these tests and create the
   # libtool script then.
-  test -f Makefile && make "$ltmain"
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
 fi
 
-if test -f "$ltmain"; then
-  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
-  $rm -f "${ofile}T"
 
-  echo creating $ofile
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      RC)
+
+
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+objext_RC=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
 
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+compiler_RC=$CC
+lt_cv_prog_compiler_c_o_RC=yes
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS \
-    AR AR_FLAGS CC LD LN_S NM SHELL \
-    reload_flag reload_cmds wl \
-    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
-    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
-    library_names_spec soname_spec \
-    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
-    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
-    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
-    old_striplib striplib file_magic_cmd export_symbols_cmds \
-    deplibs_check_method allow_undefined_flag no_undefined_flag \
-    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
-    global_symbol_to_c_name_address \
-    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
     sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_RC \
+    CC_RC \
+    LD_RC \
+    lt_prog_compiler_wl_RC \
+    lt_prog_compiler_pic_RC \
+    lt_prog_compiler_static_RC \
+    lt_prog_compiler_no_builtin_flag_RC \
+    export_dynamic_flag_spec_RC \
+    thread_safe_flag_spec_RC \
+    whole_archive_flag_spec_RC \
+    enable_shared_with_static_runtimes_RC \
+    old_archive_cmds_RC \
+    old_archive_from_new_cmds_RC \
+    predep_objects_RC \
+    postdep_objects_RC \
+    predeps_RC \
+    postdeps_RC \
+    compiler_lib_search_path_RC \
+    archive_cmds_RC \
+    archive_expsym_cmds_RC \
+    postinstall_cmds_RC \
+    postuninstall_cmds_RC \
+    old_archive_from_expsyms_cmds_RC \
+    allow_undefined_flag_RC \
+    no_undefined_flag_RC \
+    export_symbols_cmds_RC \
+    hardcode_libdir_flag_spec_RC \
+    hardcode_libdir_flag_spec_ld_RC \
+    hardcode_libdir_separator_RC \
+    hardcode_automatic_RC \
+    module_cmds_RC \
+    module_expsym_cmds_RC \
+    lt_cv_prog_compiler_c_o_RC \
+    exclude_expsyms_RC \
+    include_expsyms_RC; do
 
     case $var in
-    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
-    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
+    old_archive_cmds_RC | \
+    old_archive_from_new_cmds_RC | \
+    archive_cmds_RC | \
+    archive_expsym_cmds_RC | \
+    module_cmds_RC | \
+    module_expsym_cmds_RC | \
+    old_archive_from_expsyms_cmds_RC | \
+    export_symbols_cmds_RC | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
     postinstall_cmds | postuninstall_cmds | \
-    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
       # Double-quote double-evaled strings.
       eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
       ;;
@@ -9125,43 +20091,16 @@ if test -f "$ltmain"; then
     esac
   done
 
-  cat <<__EOF__ > "${ofile}T"
-#! $SHELL
-
-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996-2000 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
 
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+cfgfile="$ofile"
 
-# ### BEGIN LIBTOOL CONFIG
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
 
 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 
@@ -9175,7 +20114,10 @@ build_libtool_libs=$enable_shared
 build_old_libs=$enable_static
 
 # Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$need_lc
+build_libtool_need_lc=$archive_cmds_need_lc_RC
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
 
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
@@ -9183,6 +20125,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -9191,14 +20139,20 @@ echo=$lt_echo
 AR=$lt_AR
 AR_FLAGS=$lt_AR_FLAGS
 
-# The default C compiler.
-CC=$lt_CC
+# A C compiler.
+LTCC=$lt_LTCC
+
+# A language-specific compiler.
+CC=$lt_compiler_RC
 
 # Is the compiler the GNU C compiler?
-with_gcc=$GCC
+with_gcc=$GCC_RC
+
+# An ERE matcher.
+EGREP=$lt_EGREP
 
 # The linker used to build libraries.
-LD=$lt_LD
+LD=$lt_LD_RC
 
 # Whether we need hard or soft links.
 LN_S=$lt_LN_S
@@ -9207,7 +20161,7 @@ LN_S=$lt_LN_S
 NM=$lt_NM
 
 # A symbol stripping program
-STRIP=$STRIP
+STRIP=$lt_STRIP
 
 # Used to examine libraries when file_magic_cmd begins "file"
 MAGIC_CMD=$MAGIC_CMD
@@ -9229,7 +20183,7 @@ reload_flag=$lt_reload_flag
 reload_cmds=$lt_reload_cmds
 
 # How to pass a linker flag through the compiler.
-wl=$lt_wl
+wl=$lt_lt_prog_compiler_wl_RC
 
 # Object file suffix (normally "o").
 objext="$ac_objext"
@@ -9237,18 +20191,21 @@ objext="$ac_objext"
 # Old archive suffix (normally "a").
 libext="$libext"
 
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
 # Executable file suffix (normally "").
 exeext="$exeext"
 
 # Additional compiler flags for building library objects.
-pic_flag=$lt_pic_flag
+pic_flag=$lt_lt_prog_compiler_pic_RC
 pic_mode=$pic_mode
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_compiler_c_o
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
 
-# Can we write directly to a .lo ?
-compiler_o_lo=$lt_compiler_o_lo
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
 
 # Must we lock files when doing compilation ?
 need_locks=$lt_need_locks
@@ -9269,19 +20226,19 @@ dlopen_self=$enable_dlopen_self
 dlopen_self_static=$enable_dlopen_self_static
 
 # Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_link_static_flag
+link_static_flag=$lt_lt_prog_compiler_static_RC
 
 # Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_no_builtin_flag
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
 
 # Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
 
 # Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
 
 # Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
 
 # Library versioning type.
 version_type=$version_type
@@ -9298,26 +20255,50 @@ soname_spec=$lt_soname_spec
 
 # Commands used to build and install an old-style archive.
 RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
+old_archive_cmds=$lt_old_archive_cmds_RC
 old_postinstall_cmds=$lt_old_postinstall_cmds
 old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
 # Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
 
 # Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
 
 # Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
+archive_cmds=$lt_archive_cmds_RC
+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
 postinstall_cmds=$lt_postinstall_cmds
 postuninstall_cmds=$lt_postuninstall_cmds
 
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_RC
+module_expsym_cmds=$lt_module_expsym_cmds_RC
+
 # Commands to strip libraries.
 old_striplib=$lt_old_striplib
 striplib=$lt_striplib
 
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_RC
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_RC
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_RC
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_RC
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_RC
+
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
 
@@ -9325,10 +20306,10 @@ deplibs_check_method=$lt_deplibs_check_method
 file_magic_cmd=$lt_file_magic_cmd
 
 # Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
+allow_undefined_flag=$lt_allow_undefined_flag_RC
 
 # Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
+no_undefined_flag=$lt_no_undefined_flag_RC
 
 # Commands used to finish a libtool library installation in a directory.
 finish_cmds=$lt_finish_cmds
@@ -9337,13 +20318,13 @@ finish_cmds=$lt_finish_cmds
 finish_eval=$lt_finish_eval
 
 # Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_global_symbol_pipe
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
 # Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
 # Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
 # This is the shared library runtime path variable.
 runpath_var=$runpath_var
@@ -9355,36 +20336,45 @@ shlibpath_var=$shlibpath_var
 shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
 # How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
+hardcode_action=$hardcode_action_RC
 
 # Whether we should hardcode library paths into libraries.
 hardcode_into_libs=$hardcode_into_libs
 
 # Flag to hardcode \$libdir into a binary during linking.
 # This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
 
 # Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
 
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
 # resulting binary.
-hardcode_direct=$hardcode_direct
+hardcode_direct=$hardcode_direct_RC
 
 # Set to yes if using the -LDIR flag during linking hardcodes DIR into the
 # resulting binary.
-hardcode_minus_L=$hardcode_minus_L
+hardcode_minus_L=$hardcode_minus_L_RC
 
 # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
 # the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_RC
 
 # Variables whose values should be saved in libtool wrapper scripts and
 # restored at relink time.
 variables_saved_for_relink="$variables_saved_for_relink"
 
 # Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
+link_all_deplibs=$link_all_deplibs_RC
 
 # Compile-time system search path for libraries
 sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
@@ -9393,234 +20383,75 @@ sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
+fix_srcfile_path="$fix_srcfile_path_RC"
 
 # Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
+always_export_symbols=$always_export_symbols_RC
 
 # The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
+export_symbols_cmds=$lt_export_symbols_cmds_RC
 
 # The commands to extract the exported symbol list from a shared archive.
 extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
 # Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
+exclude_expsyms=$lt_exclude_expsyms_RC
 
 # Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
+include_expsyms=$lt_include_expsyms_RC
 
-# ### END LIBTOOL CONFIG
+# ### END LIBTOOL TAG CONFIG: $tagname
 
 __EOF__
 
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "${ofile}T"
 
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
 fi
-EOF
-    ;;
-  esac
 
-  case $host_os in
-  cygwin* | mingw* | pw32* | os2*)
-    cat <<'EOF' >> "${ofile}T"
-      # This is a source program that is used to create dlls on Windows
-      # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-	# This is a source program that is used to create import libraries
-	# on Windows for dlls which lack them. Don't remove nor modify the
-	# starting and closing comments
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
-#
-#  This file is part of GNU libtool.
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-#
-# #include <stdio.h>		/* for printf() */
-# #include <unistd.h>		/* for open(), lseek(), read() */
-# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-# #include <string.h>		/* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-#      int fd;
-#      int offset;
-# {
-#   unsigned char b[2];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 2);
-#   return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-#     int fd;
-#     int offset;
-# {
-#   unsigned char b[4];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 4);
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-#      void *ptr;
-# {
-#   unsigned char *b = ptr;
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-#     int argc;
-#     char *argv[];
-# {
-#     int dll;
-#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#     unsigned long export_rva, export_size, nsections, secptr, expptr;
-#     unsigned long name_rvas, nexp;
-#     unsigned char *expdata, *erva;
-#     char *filename, *dll_name;
-#
-#     filename = argv[1];
-#
-#     dll = open(filename, O_RDONLY|O_BINARY);
-#     if (dll < 1)
-# 	return 1;
-#
-#     dll_name = filename;
-#
-#     for (i=0; filename[i]; i++)
-# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-# 	    dll_name = filename + i +1;
-#
-#     pe_header_offset = pe_get32 (dll, 0x3c);
-#     opthdr_ofs = pe_header_offset + 4 + 20;
-#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-#     if (num_entries < 1) /* no exports */
-# 	return 1;
-#
-#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#     export_size = pe_get32 (dll, opthdr_ofs + 100);
-#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#     secptr = (pe_header_offset + 4 + 20 +
-# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-#     expptr = 0;
-#     for (i = 0; i < nsections; i++)
-#     {
-# 	char sname[8];
-# 	unsigned long secptr1 = secptr + 40 * i;
-# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# 	lseek(dll, secptr1, SEEK_SET);
-# 	read(dll, sname, 8);
-# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# 	{
-# 	    expptr = fptr + (export_rva - vaddr);
-# 	    if (export_rva + export_size > vaddr + vsize)
-# 		export_size = vsize - (export_rva - vaddr);
-# 	    break;
-# 	}
-#     }
-#
-#     expdata = (unsigned char*)malloc(export_size);
-#     lseek (dll, expptr, SEEK_SET);
-#     read (dll, expdata, export_size);
-#     erva = expdata - export_rva;
-#
-#     nexp = pe_as32 (expdata+24);
-#     name_rvas = pe_as32 (expdata+32);
-#
-#     printf ("EXPORTS\n");
-#     for (i = 0; i<nexp; i++)
-#     {
-# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#     }
-#
-#     return 0;
-# }
-# /* impgen.c ends here */
 
-EOF
-    ;;
-  esac
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
+CC="$lt_save_CC"
 
-  mv -f "${ofile}T" "$ofile" || \
-    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
-  chmod +x "$ofile"
-fi
+	;;
 
+      *)
+	{ { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
+echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
+   { (exit 1); exit 1; }; }
+	;;
+      esac
+
+      # Append the new tag name to the list of available tags.
+      if test -n "$tagname" ; then
+      available_tags="$available_tags $tagname"
+    fi
+    fi
+  done
+  IFS="$lt_save_ifs"
 
+  # Now substitute the updated list of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+    mv "${ofile}T" "$ofile"
+    chmod +x "$ofile"
+  else
+    rm -f "${ofile}T"
+    { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
+echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+fi
 
 
 
@@ -9634,6 +20465,24 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
 
 
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 case $host_os in
   linux*)
     # If gcc is not used, need to set $wl to use "-Wl,"
@@ -40458,12 +51307,14 @@ s,@CXXCPP@,$CXXCPP,;t t
 s,@LT_STATIC_EXEC@,$LT_STATIC_EXEC,;t t
 s,@PERL@,$PERL,;t t
 s,@AR@,$AR,;t t
+s,@EGREP@,$EGREP,;t t
 s,@LN_S@,$LN_S,;t t
 s,@ECHO@,$ECHO,;t t
+s,@ac_ct_AR@,$ac_ct_AR,;t t
 s,@RANLIB@,$RANLIB,;t t
 s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
 s,@CPP@,$CPP,;t t
-s,@EGREP@,$EGREP,;t t
+s,@ac_ct_F77@,$ac_ct_F77,;t t
 s,@LIBTOOL@,$LIBTOOL,;t t
 s,@AM_MAKEFLAGS@,$AM_MAKEFLAGS,;t t
 s,@USE_FILTER_DEFLATE@,$USE_FILTER_DEFLATE,;t t
diff --git a/doc/Makefile.in b/doc/Makefile.in
index 15a2da0..a1af459 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -103,6 +103,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -110,6 +111,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -133,6 +136,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/ADGuide/Makefile.in b/doc/html/ADGuide/Makefile.in
index fe0999d..1694a00 100644
--- a/doc/html/ADGuide/Makefile.in
+++ b/doc/html/ADGuide/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/Graphics/Makefile.in b/doc/html/Graphics/Makefile.in
index f8559b7..1701421 100644
--- a/doc/html/Graphics/Makefile.in
+++ b/doc/html/Graphics/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/Intro/Makefile.in b/doc/html/Intro/Makefile.in
index af4e9a4..24765aa 100644
--- a/doc/html/Intro/Makefile.in
+++ b/doc/html/Intro/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/Makefile.in b/doc/html/Makefile.in
index 382474b..e1bef44 100644
--- a/doc/html/Makefile.in
+++ b/doc/html/Makefile.in
@@ -103,6 +103,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -110,6 +111,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -133,6 +136,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/PSandPDF/Makefile.in b/doc/html/PSandPDF/Makefile.in
index 285e40f..3d1c671 100644
--- a/doc/html/PSandPDF/Makefile.in
+++ b/doc/html/PSandPDF/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/TechNotes/Makefile.in b/doc/html/TechNotes/Makefile.in
index 1812cfb..d284223 100644
--- a/doc/html/TechNotes/Makefile.in
+++ b/doc/html/TechNotes/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/Tutor/Graphics/Makefile.in b/doc/html/Tutor/Graphics/Makefile.in
index 57c5861..2f70ebf 100644
--- a/doc/html/Tutor/Graphics/Makefile.in
+++ b/doc/html/Tutor/Graphics/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/Tutor/Makefile.in b/doc/html/Tutor/Makefile.in
index 16c0783..ae87200 100644
--- a/doc/html/Tutor/Makefile.in
+++ b/doc/html/Tutor/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/Tutor/examples/Makefile.in b/doc/html/Tutor/examples/Makefile.in
index eb04d60..5083a9d 100644
--- a/doc/html/Tutor/examples/Makefile.in
+++ b/doc/html/Tutor/examples/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/cpplus/Makefile.in b/doc/html/cpplus/Makefile.in
index 5eb6508..fc19583 100644
--- a/doc/html/cpplus/Makefile.in
+++ b/doc/html/cpplus/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/ed_libs/Makefile.in b/doc/html/ed_libs/Makefile.in
index 78c7631..026f071 100644
--- a/doc/html/ed_libs/Makefile.in
+++ b/doc/html/ed_libs/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/ed_styles/Makefile.in b/doc/html/ed_styles/Makefile.in
index a8fc513..86cd34d 100644
--- a/doc/html/ed_styles/Makefile.in
+++ b/doc/html/ed_styles/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/doc/html/fortran/Makefile.in b/doc/html/fortran/Makefile.in
index a6ea39d..579040a 100644
--- a/doc/html/fortran/Makefile.in
+++ b/doc/html/fortran/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/examples/Makefile.in b/examples/Makefile.in
index a9c7376..ec5403a 100644
--- a/examples/Makefile.in
+++ b/examples/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/fortran/Makefile.in b/fortran/Makefile.in
index 1a32cbc..b7dd85d 100644
--- a/fortran/Makefile.in
+++ b/fortran/Makefile.in
@@ -111,6 +111,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -118,6 +119,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -141,6 +144,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in
index 1c88a77..0ebc631 100644
--- a/fortran/examples/Makefile.in
+++ b/fortran/examples/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in
index 855faa9..f72bb61 100644
--- a/fortran/src/Makefile.in
+++ b/fortran/src/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in
index 3159920..2f345fb 100644
--- a/fortran/test/Makefile.in
+++ b/fortran/test/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in
index af9b0aa..8ca8cf3 100644
--- a/fortran/testpar/Makefile.in
+++ b/fortran/testpar/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/hl/Makefile.in b/hl/Makefile.in
index ce0a6e7..506a505 100755
--- a/hl/Makefile.in
+++ b/hl/Makefile.in
@@ -102,6 +102,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -109,6 +110,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -132,6 +135,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in
index 6e8398d..70cb3d2 100644
--- a/hl/fortran/Makefile.in
+++ b/hl/fortran/Makefile.in
@@ -102,6 +102,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -109,6 +110,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -132,6 +135,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in
index 26b0945..8e6bcce 100644
--- a/hl/fortran/src/Makefile.in
+++ b/hl/fortran/src/Makefile.in
@@ -98,6 +98,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -105,6 +106,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -128,6 +131,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in
index 17e58fb..f41e777 100644
--- a/hl/fortran/test/Makefile.in
+++ b/hl/fortran/test/Makefile.in
@@ -98,6 +98,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -105,6 +106,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -128,6 +131,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in
index 573e158..0be88ea 100644
--- a/hl/src/Makefile.in
+++ b/hl/src/Makefile.in
@@ -97,6 +97,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -104,6 +105,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -127,6 +130,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in
index cd8aa48..b641eca 100644
--- a/hl/test/Makefile.in
+++ b/hl/test/Makefile.in
@@ -99,6 +99,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -106,6 +107,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -129,6 +132,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in
index 57f8d21..4be2fd7 100644
--- a/hl/tools/gif2h5/Makefile.in
+++ b/hl/tools/gif2h5/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/perform/Makefile.in b/perform/Makefile.in
index ab8b184..5a73853 100644
--- a/perform/Makefile.in
+++ b/perform/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/src/Makefile.in b/src/Makefile.in
index d006edf..64629e9 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/test/Makefile.in b/test/Makefile.in
index 81adb05..1cffdb3 100644
--- a/test/Makefile.in
+++ b/test/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/testpar/Makefile.in b/testpar/Makefile.in
index ad92c8a..70e1b59 100644
--- a/testpar/Makefile.in
+++ b/testpar/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/tools/Makefile.in b/tools/Makefile.in
index 1bbcfae..4c44470 100644
--- a/tools/Makefile.in
+++ b/tools/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/tools/gifconv/Makefile.in b/tools/gifconv/Makefile.in
index 57f8d21..4be2fd7 100644
--- a/tools/gifconv/Makefile.in
+++ b/tools/gifconv/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in
index 78f96b6..78a4828 100644
--- a/tools/h5diff/Makefile.in
+++ b/tools/h5diff/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in
index 9d2a58c..ce6704e 100644
--- a/tools/h5dump/Makefile.in
+++ b/tools/h5dump/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in
index e4d6049..bb93748 100755
--- a/tools/h5import/Makefile.in
+++ b/tools/h5import/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in
index 3904f0c..51f910e 100644
--- a/tools/h5jam/Makefile.in
+++ b/tools/h5jam/Makefile.in
@@ -91,6 +91,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -98,6 +99,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -121,6 +124,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in
index 259c5a1..3abde8e 100644
--- a/tools/h5ls/Makefile.in
+++ b/tools/h5ls/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in
index 8e2c21f..9b4a6be 100644
--- a/tools/h5repack/Makefile.in
+++ b/tools/h5repack/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in
index aca00e0..eed8325 100644
--- a/tools/lib/Makefile.in
+++ b/tools/lib/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@
diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in
index 9a3f78a..d095698 100644
--- a/tools/misc/Makefile.in
+++ b/tools/misc/Makefile.in
@@ -107,6 +107,7 @@ DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DYNAMIC_DIRS = @DYNAMIC_DIRS@
 ECHO = @ECHO@
+EGREP = @EGREP@
 F77 = @F77@
 F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
 FC = @FC@
@@ -114,6 +115,8 @@ FFLAGS = @FFLAGS@
 FILTERS = @FILTERS@
 FSEARCH_DIRS = @FSEARCH_DIRS@
 GASS = @GASS@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
 H5_VERSION = @H5_VERSION@
 HADDR_T = @HADDR_T@
 HDF5_INTERFACES = @HDF5_INTERFACES@
@@ -137,6 +140,7 @@ PARALLEL = @PARALLEL@
 PERL = @PERL@
 PTHREAD = @PTHREAD@
 RANLIB = @RANLIB@
+RC = @RC@
 ROOT = @ROOT@
 RUNPARALLEL = @RUNPARALLEL@
 RUNSERIAL = @RUNSERIAL@