[svn-r19167] Bug fix: 1917.

Description:
test/big incorrectly determined not able to write files larger than 2GB and
skipped the SEC2 and STDIO driver tests.  The reason was because it was using
off_t while the SEC2 driver is using lseek64 which expects off64_t type.

Solution:
Created a new HDoff_t which is set to off_t or off64_t or other appropriate
type depending on which of lseek or lseek64 is available. Changed SEC2 file
driver and the big test to use this common definition.

Tested:
In BP (AIX), using --enable and --disable-largefile, for both 32 and 64 bits
modes.  Did not do h5committest because: 1. the error was exposed in the remote
BP machine; 2. the change is trivial.
Note that STDIO driver failed when --disable-largefile is used. That is an
error in the STDIO driver code that is being fixed.

3 files changed, 26 insertions, 29 deletions

diff --git a/src/H5FDsec2.c b/src/H5FDsec2.c
index c715aae..7e54063 100644
--- a/src/H5FDsec2.c
+++ b/src/H5FDsec2.c
@@ -107,24 +107,14 @@ typedef struct H5FD_sec2_t {
  * some macros here so we don't have to have conditional compilations later
  * throughout the code.
  *
- * file_offset_t:	The datatype for file offsets, the second argument of
- *			the lseek() or lseek64() call.
+ * HDoff_t:	The datatype for file offsets, the second argument of
+ *		the lseek() or lseek64() call.
  *
  */
-/* adding for windows NT file system support. */
-
-#ifdef H5_HAVE_LSEEK64
-#   define file_offset_t	off64_t
-#elif defined (_WIN32) && !defined(__MWERKS__)
-# /*MSVC*/
-#   define file_offset_t        __int64
-#else
-#   define file_offset_t	off_t
-#endif
 
 /*
  * These macros check for overflow of various quantities.  These macros
- * assume that file_offset_t is signed and haddr_t and size_t are unsigned.
+ * assume that HDoff_t is signed and haddr_t and size_t are unsigned.
  *
  * ADDR_OVERFLOW:	Checks whether a file address of type `haddr_t'
  *			is too large to be represented by the second argument
@@ -137,13 +127,13 @@ typedef struct H5FD_sec2_t {
  *			which can be addressed entirely by the second
  *			argument of the file seek function.
  */
-#define MAXADDR (((haddr_t)1<<(8*sizeof(file_offset_t)-1))-1)
+#define MAXADDR (((haddr_t)1<<(8*sizeof(HDoff_t)-1))-1)
 #define ADDR_OVERFLOW(A)	(HADDR_UNDEF==(A) ||			      \
 				 ((A) & ~(haddr_t)MAXADDR))
 #define SIZE_OVERFLOW(Z)	((Z) & ~(hsize_t)MAXADDR)
 #define REGION_OVERFLOW(A,Z)	(ADDR_OVERFLOW(A) || SIZE_OVERFLOW(Z) ||      \
                                  HADDR_UNDEF==(A)+(Z) ||		      \
-				 (file_offset_t)((A)+(Z))<(file_offset_t)(A))
+				 (HDoff_t)((A)+(Z))<(HDoff_t)(A))
 
 /* Prototypes */
 static H5FD_t *H5FD_sec2_open(const char *name, unsigned flags, hid_t fapl_id,
@@ -344,7 +334,7 @@ H5FD_sec2_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
     FUNC_ENTER_NOAPI(H5FD_sec2_open, NULL)
 
     /* Sanity check on file offsets */
-    HDassert(sizeof(file_offset_t) >= sizeof(size_t));
+    HDassert(sizeof(HDoff_t) >= sizeof(size_t));
 
     /* Check arguments */
     if(!name || !*name)
@@ -752,7 +742,7 @@ H5FD_sec2_read(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id,
 
     /* Seek to the correct location */
     if((addr != file->pos || OP_READ != file->op) &&
-            HDlseek(file->fd, (file_offset_t)addr, SEEK_SET) < 0)
+            HDlseek(file->fd, (HDoff_t)addr, SEEK_SET) < 0)
         HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position")
 
     /*
@@ -766,7 +756,7 @@ H5FD_sec2_read(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id,
         if(-1 == nbytes) { /* error */
             int myerrno = errno;
             time_t mytime = HDtime(NULL);
-            file_offset_t myoffset = HDlseek(file->fd, (file_offset_t)0, SEEK_CUR);
+            HDoff_t myoffset = HDlseek(file->fd, (HDoff_t)0, SEEK_CUR);
 
             HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file read failed: time = %s, filename = '%s', file descriptor = %d, errno = %d, error message = '%s', buf = %p, size = %lu, offset = %llu", HDctime(&mytime), file->filename, file->fd, myerrno, HDstrerror(myerrno), buf, (unsigned long)size, (unsigned long long)myoffset);
         } /* end if */
@@ -838,7 +828,7 @@ H5FD_sec2_write(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, had
 
     /* Seek to the correct location */
     if((addr != file->pos || OP_WRITE != file->op) &&
-            HDlseek(file->fd, (file_offset_t)addr, SEEK_SET) < 0)
+            HDlseek(file->fd, (HDoff_t)addr, SEEK_SET) < 0)
         HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position")
 
     /*
@@ -852,7 +842,7 @@ H5FD_sec2_write(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, had
         if(-1 == nbytes) { /* error */
             int myerrno = errno;
             time_t mytime = HDtime(NULL);
-            file_offset_t myoffset = HDlseek(file->fd, (file_offset_t)0, SEEK_CUR);
+            HDoff_t myoffset = HDlseek(file->fd, (HDoff_t)0, SEEK_CUR);
 
             HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed: time = %s, filename = '%s', file descriptor = %d, errno = %d, error message = '%s', buf = %p, size = %lu, offset = %llu", HDctime(&mytime), file->filename, file->fd, myerrno, HDstrerror(myerrno), buf, (unsigned long)size, (unsigned long long)myoffset);
         } /* end if */
@@ -927,11 +917,11 @@ H5FD_sec2_truncate(H5FD_t *_file, hid_t UNUSED dxpl_id, hbool_t UNUSED closing)
 #ifdef H5_VMS
         /* Reset seek offset to the beginning of the file, so that the file isn't
          * re-extended later.  This may happen on Open VMS. */
-        if(-1 == HDlseek(file->fd, (file_offset_t)0, SEEK_SET))
+        if(-1 == HDlseek(file->fd, (HDoff_t)0, SEEK_SET))
             HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position")
 #endif
 
-        if(-1 == HDftruncate(file->fd, (file_offset_t)file->eoa))
+        if(-1 == HDftruncate(file->fd, (HDoff_t)file->eoa))
             HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly")
 #endif /* _WIN32 */
 
@@ -946,3 +936,4 @@ H5FD_sec2_truncate(H5FD_t *_file, hid_t UNUSED dxpl_id, hbool_t UNUSED closing)
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5FD_sec2_truncate() */
+
diff --git a/src/H5private.h b/src/H5private.h
index 5b8d123..e6da2cc 100644
--- a/src/H5private.h
+++ b/src/H5private.h
@@ -914,9 +914,16 @@ H5_DLL int HDfprintf (FILE *stream, const char *fmt, ...);
 #endif /* HDlongjmp */
 #ifndef HDlseek
     #ifdef H5_HAVE_LSEEK64
-       #define HDlseek(F,O,W)	lseek64(F,O,W)
+        #define HDlseek(F,O,W)	lseek64(F,O,W)
+        #define HDoff_t		off64_t
     #else
-       #define HDlseek(F,O,W)	lseek(F,O,W)
+        #define HDlseek(F,O,W)	lseek(F,O,W)
+	#if defined (_WIN32) && !defined(__MWERKS__)
+	# /*MSVC*/
+	#   define HDoff_t        __int64
+	#else
+	#   define HDoff_t	off_t
+	#endif
     #endif
 #endif /* HDlseek */
 #ifndef HDmalloc
diff --git a/test/big.c b/test/big.c
index dde9d7a..8d65559 100644
--- a/test/big.c
+++ b/test/big.c
@@ -32,8 +32,7 @@ const char *FILENAME[] = {
 #define WRT_SIZE	4*1024
 #define FAMILY_SIZE	1024*1024*1024
 
-/* Define big file as 2GB */
-#define BIG_FILE (off_t)0x80000000UL
+#define GB (HDoff_t)0x40000000L
 
 #define MAX_TRIES	100
 
@@ -165,15 +164,15 @@ supports_big(void)
     if ((fd=HDopen("y.h5", O_RDWR|O_TRUNC|O_CREAT, 0666)) < 0) return 0;
 
     /* Write a few bytes at 2GB */
-    if (HDlseek(fd, BIG_FILE, SEEK_SET)!=BIG_FILE) return 0;
+    if (HDlseek(fd, 2*GB, SEEK_SET)!=2*GB) return 0;
     if (5!=HDwrite(fd, "hello", (size_t)5)) return 0;
 
     /* Write a few bytes at 4GB */
-    if (HDlseek(fd, 2*BIG_FILE, SEEK_SET) != 2*BIG_FILE) return 0;
+    if (HDlseek(fd, 4*GB, SEEK_SET) != 4*GB) return 0;
     if (5!=HDwrite(fd, "hello", (size_t)5)) return 0;
 
     if (HDclose(fd) < 0) return 0;
-    if (HDunlink("y.h5") < 0) return 0;
+    if (HDremove("y.h5") < 0) return 0;
 
     return (1);
 }