summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRobb Matzke <matzke@llnl.gov>1998-06-12 17:31:06 (GMT)
committerRobb Matzke <matzke@llnl.gov>1998-06-12 17:31:06 (GMT)
commitdd58a3ec29a061f42609669ff633c0763f834af9 (patch)
tree82c95ae74cc9730a1920862f183cd98f8371e0f5
parent674198fcc7454b962670010b0e3b120fa792f216 (diff)
downloadhdf5-dd58a3ec29a061f42609669ff633c0763f834af9.zip
hdf5-dd58a3ec29a061f42609669ff633c0763f834af9.tar.gz
hdf5-dd58a3ec29a061f42609669ff633c0763f834af9.tar.bz2
[svn-r425] Changes since 19980610
---------------------- THIS CHECKIN IS FOR QUINCEY -- NOT EVERYTHING WORKS (but it compiles) MOST OF THE CHANGES ARE FOR BETTER TYPE CONVERSION IN THE NEXT ALPHA ./MANIFEST ./src/H5Tbit.c NEW ./src/Makefile.in Bit vector operations (not done yet) ./configure.in Added -lm to the library list, needed by bit-vector operations and conversion functions. Removed vestiges of PARALLEL_SRC no longer used by the makefiles. Albert came up with a better way (that actually works :-) ./src/H5D.c No code changes. Split a couple of long lines, refilled a couple multi-line comments. ./src/H5T.c ./src/H5Tpublic.h Fixed a bug reported by Jim Reus regarding conversion of compound data types whose members require conversions which are satisfied by as-yet unregistered soft conversion functions. Added H5T_IEEE architecture, but the funny-looking integer types will be changed to H5T_BE_ and H5T_LE_ architectures with the type names changed to match the H5T_NATIVE_ integers. Added an H5Tconvert() but it hasn't been documented or tested yet. ./src/H5Tconv.c ./src/H5Tpkg.h Registered conversion functions integer->integer (a general case) and integer->float (for a specific case). The integer->integer conversion depends on the bitvector operations which aren't finished yet and the int->float conversion hasn't been retested since it was borrowed from AIO. Don't look at them yet, they're ugly :-) ./src/H5detect.c Fixed a typo which caused the msb_pad field of an atomic type to not be initialized. ./test/dtypes.c Added a test for number conversions but it's commented out until the conversion stuff is truly working.
Diffstat
-rw-r--r--MANIFEST1
-rwxr-xr-xconfigure226
-rw-r--r--configure.in3
-rw-r--r--src/H5D.c46
-rw-r--r--src/H5T.c382
-rw-r--r--src/H5Tbit.c154
-rw-r--r--src/H5Tconv.c679
-rw-r--r--src/H5Tpkg.h18
-rw-r--r--src/H5Tpublic.h44
-rw-r--r--src/H5detect.c2
-rw-r--r--src/Makefile.in12
-rw-r--r--test/dtypes.c74
12 files changed, 1482 insertions, 159 deletions
diff --git a/MANIFEST b/MANIFEST
index 6dfe1dd..165fe25 100644
--- a/MANIFEST
+++ b/MANIFEST
@@ -187,6 +187,7 @@
./src/H5Spublic.h
./src/H5Ssimp.c
./src/H5T.c
+./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
diff --git a/configure b/configure
index f0d73e6..d94c5ab 100755
--- a/configure
+++ b/configure
@@ -994,8 +994,55 @@ case "X-$enableval" in
esac
+echo $ac_n "checking for ceil in -lm""... $ac_c" 1>&6
+echo "configure:999: checking for ceil in -lm" >&5
+ac_lib_var=`echo m'_'ceil | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1007 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char ceil();
+
+int main() {
+ceil()
+; return 0; }
+EOF
+if { (eval echo configure:1018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_lib=HAVE_LIB`echo m | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+ LIBS="-lm $LIBS"
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
echo $ac_n "checking for main in -lcoug""... $ac_c" 1>&6
-echo "configure:999: checking for main in -lcoug" >&5
+echo "configure:1046: checking for main in -lcoug" >&5
ac_lib_var=`echo coug'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1003,14 +1050,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lcoug $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1007 "configure"
+#line 1054 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:1014: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -1037,7 +1084,7 @@ else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for compress2 in -lz""... $ac_c" 1>&6
-echo "configure:1041: checking for compress2 in -lz" >&5
+echo "configure:1088: checking for compress2 in -lz" >&5
ac_lib_var=`echo z'_'compress2 | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1045,7 +1092,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1049 "configure"
+#line 1096 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -1056,7 +1103,7 @@ int main() {
compress2()
; return 0; }
EOF
-if { (eval echo configure:1060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -1085,7 +1132,7 @@ fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1089: checking how to run the C preprocessor" >&5
+echo "configure:1136: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
@@ -1100,13 +1147,13 @@ else
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1104 "configure"
+#line 1151 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1110: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1157: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
@@ -1117,13 +1164,13 @@ else
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1121 "configure"
+#line 1168 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1127: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1174: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
@@ -1146,12 +1193,12 @@ fi
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1150: checking for ANSI C header files" >&5
+echo "configure:1197: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1155 "configure"
+#line 1202 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
@@ -1159,7 +1206,7 @@ else
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1163: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1210: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -1176,7 +1223,7 @@ rm -f conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1180 "configure"
+#line 1227 "configure"
#include "confdefs.h"
#include <string.h>
EOF
@@ -1194,7 +1241,7 @@ fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1198 "configure"
+#line 1245 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
@@ -1215,7 +1262,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
-#line 1219 "configure"
+#line 1266 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1226,7 +1273,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }
EOF
-if { (eval echo configure:1230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
:
else
@@ -1253,17 +1300,17 @@ for ac_hdr in unistd.h zlib.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1257: checking for $ac_hdr" >&5
+echo "configure:1304: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1262 "configure"
+#line 1309 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1267: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -1292,12 +1339,12 @@ done
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:1296: checking for off_t" >&5
+echo "configure:1343: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1301 "configure"
+#line 1348 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -1325,12 +1372,12 @@ EOF
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1329: checking for size_t" >&5
+echo "configure:1376: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1334 "configure"
+#line 1381 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -1358,14 +1405,14 @@ EOF
fi
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:1362: checking whether byte ordering is bigendian" >&5
+echo "configure:1409: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 1369 "configure"
+#line 1416 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
@@ -1376,11 +1423,11 @@ int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:1380: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1427: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 1384 "configure"
+#line 1431 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
@@ -1391,7 +1438,7 @@ int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:1395: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1442: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
@@ -1411,7 +1458,7 @@ if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 1415 "configure"
+#line 1462 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
@@ -1424,7 +1471,7 @@ main () {
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:1428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1475: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
@@ -1448,7 +1495,7 @@ EOF
fi
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:1452: checking size of short" >&5
+echo "configure:1499: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1456,7 +1503,7 @@ else
ac_cv_sizeof_short=2
else
cat > conftest.$ac_ext <<EOF
-#line 1460 "configure"
+#line 1507 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
@@ -1467,7 +1514,7 @@ main()
exit(0);
}
EOF
-if { (eval echo configure:1471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1518: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
@@ -1487,7 +1534,7 @@ EOF
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:1491: checking size of int" >&5
+echo "configure:1538: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1495,7 +1542,7 @@ else
ac_cv_sizeof_int=4
else
cat > conftest.$ac_ext <<EOF
-#line 1499 "configure"
+#line 1546 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
@@ -1506,7 +1553,7 @@ main()
exit(0);
}
EOF
-if { (eval echo configure:1510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
@@ -1526,7 +1573,7 @@ EOF
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:1530: checking size of long" >&5
+echo "configure:1577: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1534,7 +1581,7 @@ else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 1538 "configure"
+#line 1585 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
@@ -1545,7 +1592,7 @@ main()
exit(0);
}
EOF
-if { (eval echo configure:1549: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
@@ -1565,7 +1612,7 @@ EOF
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:1569: checking size of long long" >&5
+echo "configure:1616: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1573,7 +1620,7 @@ else
ac_cv_sizeof_long_long=8
else
cat > conftest.$ac_ext <<EOF
-#line 1577 "configure"
+#line 1624 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
@@ -1584,7 +1631,7 @@ main()
exit(0);
}
EOF
-if { (eval echo configure:1588: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1635: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
@@ -1604,7 +1651,7 @@ EOF
echo $ac_n "checking size of float""... $ac_c" 1>&6
-echo "configure:1608: checking size of float" >&5
+echo "configure:1655: checking size of float" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_float'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1612,7 +1659,7 @@ else
ac_cv_sizeof_float=4
else
cat > conftest.$ac_ext <<EOF
-#line 1616 "configure"
+#line 1663 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
@@ -1623,7 +1670,7 @@ main()
exit(0);
}
EOF
-if { (eval echo configure:1627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_float=`cat conftestval`
else
@@ -1643,7 +1690,7 @@ EOF
echo $ac_n "checking size of double""... $ac_c" 1>&6
-echo "configure:1647: checking size of double" >&5
+echo "configure:1694: checking size of double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1651,7 +1698,7 @@ else
ac_cv_sizeof_double=8
else
cat > conftest.$ac_ext <<EOF
-#line 1655 "configure"
+#line 1702 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
@@ -1662,7 +1709,7 @@ main()
exit(0);
}
EOF
-if { (eval echo configure:1666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_double=`cat conftestval`
else
@@ -1682,7 +1729,7 @@ EOF
echo $ac_n "checking size of size_t""... $ac_c" 1>&6
-echo "configure:1686: checking size of size_t" >&5
+echo "configure:1733: checking size of size_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1690,7 +1737,7 @@ else
ac_cv_sizeof_size_t=4
else
cat > conftest.$ac_ext <<EOF
-#line 1694 "configure"
+#line 1741 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
@@ -1701,7 +1748,7 @@ main()
exit(0);
}
EOF
-if { (eval echo configure:1705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_size_t=`cat conftestval`
else
@@ -1724,7 +1771,7 @@ cat >>confdefs.h <<\EOF
#include <sys/types.h> /*for off_t definition*/
EOF
echo $ac_n "checking size of off_t""... $ac_c" 1>&6
-echo "configure:1728: checking size of off_t" >&5
+echo "configure:1775: checking size of off_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1732,7 +1779,7 @@ else
ac_cv_sizeof_off_t=4
else
cat > conftest.$ac_ext <<EOF
-#line 1736 "configure"
+#line 1783 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
@@ -1743,7 +1790,7 @@ main()
exit(0);
}
EOF
-if { (eval echo configure:1747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_off_t=`cat conftestval`
else
@@ -1770,7 +1817,7 @@ if test "${enable_hsizet+set}" = set; then
fi
echo $ac_n "checking for sizeof hsize_t and hssize_t""... $ac_c" 1>&6
-echo "configure:1774: checking for sizeof hsize_t and hssize_t" >&5
+echo "configure:1821: checking for sizeof hsize_t and hssize_t" >&5
case $HSIZET in
no|small)
echo "$ac_t""small" 1>&6
@@ -1788,12 +1835,12 @@ esac
for ac_func in getpwuid gethostname system getrusage
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1792: checking for $ac_func" >&5
+echo "configure:1839: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1797 "configure"
+#line 1844 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -1816,7 +1863,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:1820: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1867: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -1842,24 +1889,24 @@ done
cat > conftest.$ac_ext <<EOF
-#line 1846 "configure"
+#line 1893 "configure"
#include "confdefs.h"
#include<sys/types.h>
int main() {
off64_t n = 0;
; return 0; }
EOF
-if { (eval echo configure:1853: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1900: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
for ac_func in lseek64 fseek64
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1858: checking for $ac_func" >&5
+echo "configure:1905: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1863 "configure"
+#line 1910 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -1882,7 +1929,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:1886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -1917,12 +1964,12 @@ rm -f conftest*
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1921: checking for working const" >&5
+echo "configure:1968: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1926 "configure"
+#line 1973 "configure"
#include "confdefs.h"
int main() {
@@ -1971,7 +2018,7 @@ ccp = (char const *const *) p;
; return 0; }
EOF
-if { (eval echo configure:1975: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2022: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
@@ -1992,21 +2039,21 @@ EOF
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1996: checking for inline" >&5
+echo "configure:2043: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2003 "configure"
+#line 2050 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2010: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2057: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
@@ -2033,16 +2080,16 @@ esac
echo $ac_n "checking for __attribute__ extension""... $ac_c" 1>&6
-echo "configure:2037: checking for __attribute__ extension" >&5
+echo "configure:2084: checking for __attribute__ extension" >&5
cat > conftest.$ac_ext <<EOF
-#line 2039 "configure"
+#line 2086 "configure"
#include "confdefs.h"
int main() {
int __attribute__((unused)) f(void){return 1;}
; return 0; }
EOF
-if { (eval echo configure:2046: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2093: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_ATTRIBUTE 1
@@ -2058,16 +2105,16 @@ fi
rm -f conftest*
echo $ac_n "checking for __FUNCTION__ extension""... $ac_c" 1>&6
-echo "configure:2062: checking for __FUNCTION__ extension" >&5
+echo "configure:2109: checking for __FUNCTION__ extension" >&5
cat > conftest.$ac_ext <<EOF
-#line 2064 "configure"
+#line 2111 "configure"
#include "confdefs.h"
int main() {
int f(void){return __FUNCTION__;}
; return 0; }
EOF
-if { (eval echo configure:2071: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2118: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_FUNCTION 1
@@ -2083,7 +2130,7 @@ fi
rm -f conftest*
echo $ac_n "checking how to print long long""... $ac_c" 1>&6
-echo "configure:2087: checking how to print long long" >&5;
+echo "configure:2134: checking how to print long long" >&5;
if eval "test \"`echo '$''{'hdf5_cv_printf_ll'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2092,7 +2139,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2096 "configure"
+#line 2143 "configure"
#include "confdefs.h"
#include <stdio.h>
@@ -2103,7 +2150,7 @@ else
sprintf(s,"%${hdf5_cv_printf_ll}d",x);
exit (strcmp(s,"1099511627776"));}
EOF
-if { (eval echo configure:2107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
break
else
@@ -2124,7 +2171,7 @@ EOF
echo $ac_n "checking for debug flags""... $ac_c" 1>&6
-echo "configure:2128: checking for debug flags" >&5;
+echo "configure:2175: checking for debug flags" >&5;
# Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
enableval="$enable_debug"
@@ -2162,8 +2209,7 @@ if test "${enable_parallel+set}" = set; then
fi
echo $ac_n "checking for parallel support""... $ac_c" 1>&6
-echo "configure:2166: checking for parallel support" >&5;
-
+echo "configure:2213: checking for parallel support" >&5;
case "X-$PARALLEL" in
@@ -2184,12 +2230,11 @@ case "X-$PARALLEL" in
#define HAVE_PARALLEL 1
EOF
- PARALLEL_SRC='$(PARALLEL_SRC)'
CPPFLAGS="$CPPFLAGS $MPI_INC"
CFLAGS="$CFLAGS $MPI_LIB"
RUNTEST="$RUNTEST"
echo $ac_n "checking for main in -lmpi""... $ac_c" 1>&6
-echo "configure:2193: checking for main in -lmpi" >&5
+echo "configure:2238: checking for main in -lmpi" >&5
ac_lib_var=`echo mpi'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -2197,14 +2242,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lmpi $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2201 "configure"
+#line 2246 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2253: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -2231,7 +2276,7 @@ else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for main in -lmpio""... $ac_c" 1>&6
-echo "configure:2235: checking for main in -lmpio" >&5
+echo "configure:2280: checking for main in -lmpio" >&5
ac_lib_var=`echo mpio'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -2239,14 +2284,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lmpio $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2243 "configure"
+#line 2288 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2295: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -2451,7 +2496,6 @@ s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@RANLIB@%$RANLIB%g
s%@AR@%$AR%g
s%@CPP@%$CPP%g
-s%@PARALLEL_SRC@%$PARALLEL_SRC%g
s%@RUNTEST@%$RUNTEST%g
/@COMMENCE@/r $COMMENCE
s%@COMMENCE@%%g
diff --git a/configure.in b/configure.in
index 676fcdc..598c377 100644
--- a/configure.in
+++ b/configure.in
@@ -125,6 +125,7 @@ esac
dnl ----------------------------------------------------------------------
dnl Check for libraries. (none required yet)
dnl
+AC_CHECK_LIB(m, ceil)
AC_CHECK_LIB(coug, main) dnl ...for ASCI/Red
AC_CHECK_LIB(z, compress2)
@@ -266,7 +267,6 @@ AC_ARG_ENABLE(parallel,
--enable-parallel=mpio Enable parallel support with MPIO,
PARALLEL=$enableval)
AC_MSG_CHECKING(for parallel support);
-AC_SUBST(PARALLEL_SRC)
AC_SUBST(RUNTEST)
case "X-$PARALLEL" in
@@ -284,7 +284,6 @@ case "X-$PARALLEL" in
# list also so we don't have to ifdef out the whole file.
AC_MSG_RESULT(mpio)
AC_DEFINE(HAVE_PARALLEL)
- PARALLEL_SRC='$(PARALLEL_SRC)'
CPPFLAGS="$CPPFLAGS $MPI_INC"
CFLAGS="$CFLAGS $MPI_LIB"
RUNTEST="$RUNTEST"
diff --git a/src/H5D.c b/src/H5D.c
index 10231fc..d56930b 100644
--- a/src/H5D.c
+++ b/src/H5D.c
@@ -1182,14 +1182,15 @@ H5D_read(H5D_t *dataset, const H5T_t *mem_type, const H5S_t *mem_space,
* Check if collective data transfer requested.
*/
if (xfer_parms->xfer_mode == H5D_XFER_COLLECTIVE){
- /* verify that the file can support collective access. */
- /* The check may not be necessarily since collective access */
- /* can always be simulated by independent access. */
- /* Nevertheless, must check driver is MPIO before using those */
- /* access_mode which exists only for MPIO case. */
+ /*
+ * Verify that the file can support collective access. The check may
+ * not be necessarily since collective access can always be simulated
+ * by independent access. Nevertheless, must check driver is MPIO
+ * before using those access_mode which exists only for MPIO case.
+ */
if (dataset->ent.file->shared->access_parms->driver != H5F_LOW_MPIO)
HGOTO_ERROR (H5E_DATASET, H5E_UNSUPPORTED, FAIL,
- "collective access not permissible");
+ "collective access not permissible");
}
#endif /*HAVE_PARALLEL*/
@@ -1232,11 +1233,11 @@ H5D_read(H5D_t *dataset, const H5T_t *mem_type, const H5S_t *mem_space,
if (H5T_conv_noop==tconv_func &&
NULL!=sconv_func->read) {
status = (sconv_func->read)(dataset->ent.file, &(dataset->layout),
- &(dataset->create_parms->compress),
- &(dataset->create_parms->efl),
- H5T_get_size (dataset->type), file_space,
- mem_space, xfer_parms->xfer_mode,
- buf/*out*/);
+ &(dataset->create_parms->compress),
+ &(dataset->create_parms->efl),
+ H5T_get_size (dataset->type),
+ file_space, mem_space,
+ xfer_parms->xfer_mode, buf/*out*/);
if (status>=0) goto succeed;
HGOTO_ERROR (H5E_DATASET, H5E_READERROR, FAIL,
"collective read failed");
@@ -1469,14 +1470,15 @@ H5D_write(H5D_t *dataset, const H5T_t *mem_type, const H5S_t *mem_space,
* Check if collective data transfer requested.
*/
if (xfer_parms->xfer_mode == H5D_XFER_COLLECTIVE){
- /* verify that the file can support collective access. */
- /* The check may not be necessarily since collective access */
- /* can always be simulated by independent access. */
- /* Nevertheless, must check driver is MPIO before using those */
- /* access_mode which exists only for MPIO case. */
+ /*
+ * Verify that the file can support collective access. The check may
+ * not be necessarily since collective access can always be simulated
+ * by independent access. Nevertheless, must check driver is MPIO
+ * before using those access_mode which exists only for MPIO case.
+ */
if (dataset->ent.file->shared->access_parms->driver != H5F_LOW_MPIO)
HGOTO_ERROR (H5E_DATASET, H5E_UNSUPPORTED, FAIL,
- "collective access not permissible");
+ "collective access not permissible");
}
#endif /*HAVE_PARALLEL*/
@@ -1518,14 +1520,16 @@ H5D_write(H5D_t *dataset, const H5T_t *mem_type, const H5S_t *mem_space,
/* Supports only no conversion, type or space, for now. */
if (H5T_conv_noop==tconv_func &&
NULL!=sconv_func->write) {
- status = (sconv_func->write)(dataset->ent.file, &(dataset->layout),
+ status = (sconv_func->write)(dataset->ent.file,
+ &(dataset->layout),
&(dataset->create_parms->compress),
&(dataset->create_parms->efl),
- H5T_get_size (dataset->type), file_space,
- mem_space, xfer_parms->xfer_mode, buf);
+ H5T_get_size (dataset->type),
+ file_space, mem_space,
+ xfer_parms->xfer_mode, buf);
if (status>=0) goto succeed;
HGOTO_ERROR (H5E_DATASET, H5E_WRITEERROR, FAIL,
- "collective write failed");
+ "collective write failed");
}
}
#endif /*HAVE_PARALLEL*/
diff --git a/src/H5T.c b/src/H5T.c
index e3a1e1d..7bb0046 100644
--- a/src/H5T.c
+++ b/src/H5T.c
@@ -30,7 +30,7 @@ static intn interface_initialize_g = FALSE;
#define INTERFACE_INIT H5T_init_interface
static void H5T_term_interface(void);
-/* Predefined types */
+/* Predefined native types */
hid_t H5T_NATIVE_CHAR_g = FAIL;
hid_t H5T_NATIVE_UCHAR_g = FAIL;
hid_t H5T_NATIVE_SHORT_g = FAIL;
@@ -58,10 +58,29 @@ hid_t H5T_NATIVE_STRING_g = FAIL;
hid_t H5T_NATIVE_BITFIELD_g = FAIL;
hid_t H5T_NATIVE_OPAQUE_g = FAIL;
+/* Predefined standard types */
+hid_t H5T_IEEE_R32LE_g = FAIL;
+hid_t H5T_IEEE_R32BE_g = FAIL;
+hid_t H5T_IEEE_R64LE_g = FAIL;
+hid_t H5T_IEEE_R64BE_g = FAIL;
+hid_t H5T_IEEE_U16LE_g = FAIL;
+hid_t H5T_IEEE_U16BE_g = FAIL;
+hid_t H5T_IEEE_U32LE_g = FAIL;
+hid_t H5T_IEEE_U32BE_g = FAIL;
+hid_t H5T_IEEE_U64LE_g = FAIL;
+hid_t H5T_IEEE_U64BE_g = FAIL;
+hid_t H5T_IEEE_S16LE_g = FAIL;
+hid_t H5T_IEEE_S16BE_g = FAIL;
+hid_t H5T_IEEE_S32LE_g = FAIL;
+hid_t H5T_IEEE_S32BE_g = FAIL;
+hid_t H5T_IEEE_S64LE_g = FAIL;
+hid_t H5T_IEEE_S64BE_g = FAIL;
+
+
/* The path database */
static intn H5T_npath_g = 0; /*num paths defined */
static intn H5T_apath_g = 0; /*num slots allocated */
-static H5T_path_t *H5T_path_g = NULL; /*path array */
+static H5T_path_t **H5T_path_g = NULL; /*path array */
/* The soft conversion function master list */
static intn H5T_nsoft_g = 0; /*num soft funcs defined */
@@ -155,6 +174,215 @@ H5T_init_interface(void)
H5Tlock(H5T_NATIVE_UINT64_g);
/*
+ * Standard data types in big and little endian flavors.
+ */
+
+ /* IEEE 4-byte little-endian float */
+ dt = H5I_object (H5T_IEEE_R32LE_g = H5Tcopy (H5T_NATIVE_DOUBLE));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 4;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 32;
+ dt->u.atomic.order = H5T_ORDER_LE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.f.sign = 31;
+ dt->u.atomic.u.f.epos = 23;
+ dt->u.atomic.u.f.esize = 8;
+ dt->u.atomic.u.f.ebias = 0x7f;
+ dt->u.atomic.u.f.mpos = 0;
+ dt->u.atomic.u.f.msize = 23;
+ dt->u.atomic.u.f.norm = H5T_NORM_IMPLIED;
+ dt->u.atomic.u.f.pad = H5T_PAD_ZERO;
+
+ /* IEEE 4-byte big-endian float */
+ dt = H5I_object (H5T_IEEE_R32BE_g = H5Tcopy (H5T_NATIVE_DOUBLE));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 4;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 32;
+ dt->u.atomic.order = H5T_ORDER_BE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.f.sign = 31;
+ dt->u.atomic.u.f.epos = 23;
+ dt->u.atomic.u.f.esize = 8;
+ dt->u.atomic.u.f.ebias = 0x7f;
+ dt->u.atomic.u.f.mpos = 0;
+ dt->u.atomic.u.f.msize = 23;
+ dt->u.atomic.u.f.norm = H5T_NORM_IMPLIED;
+ dt->u.atomic.u.f.pad = H5T_PAD_ZERO;
+
+ /* IEEE 8-byte little-endian float */
+ dt = H5I_object (H5T_IEEE_R64LE_g = H5Tcopy (H5T_NATIVE_DOUBLE));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 8;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 64;
+ dt->u.atomic.order = H5T_ORDER_LE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.f.sign = 63;
+ dt->u.atomic.u.f.epos = 52;
+ dt->u.atomic.u.f.esize = 11;
+ dt->u.atomic.u.f.ebias = 0x03ff;
+ dt->u.atomic.u.f.mpos = 0;
+ dt->u.atomic.u.f.msize = 52;
+ dt->u.atomic.u.f.norm = H5T_NORM_IMPLIED;
+ dt->u.atomic.u.f.pad = H5T_PAD_ZERO;
+
+ /* IEEE 8-byte big-endian float */
+ dt = H5I_object (H5T_IEEE_R64BE_g = H5Tcopy (H5T_NATIVE_DOUBLE));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 8;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 64;
+ dt->u.atomic.order = H5T_ORDER_BE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.f.sign = 63;
+ dt->u.atomic.u.f.epos = 52;
+ dt->u.atomic.u.f.esize = 11;
+ dt->u.atomic.u.f.ebias = 0x03ff;
+ dt->u.atomic.u.f.mpos = 0;
+ dt->u.atomic.u.f.msize = 52;
+ dt->u.atomic.u.f.norm = H5T_NORM_IMPLIED;
+ dt->u.atomic.u.f.pad = H5T_PAD_ZERO;
+
+ /* IEEE 2-byte little-endian signed integer */
+ dt = H5I_object (H5T_IEEE_S16LE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 2;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 16;
+ dt->u.atomic.order = H5T_ORDER_LE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_2;
+
+ /* IEEE 2-byte big-endian signed integer */
+ dt = H5I_object (H5T_IEEE_S16BE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 2;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 16;
+ dt->u.atomic.order = H5T_ORDER_BE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_2;
+
+ /* IEEE 4-byte little-endian signed integer */
+ dt = H5I_object (H5T_IEEE_S32LE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 4;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 32;
+ dt->u.atomic.order = H5T_ORDER_LE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_2;
+
+ /* IEEE 4-byte big-endian signed integer */
+ dt = H5I_object (H5T_IEEE_S32BE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 4;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 32;
+ dt->u.atomic.order = H5T_ORDER_BE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_2;
+
+ /* IEEE 8-byte little-endian signed integer */
+ dt = H5I_object (H5T_IEEE_S64LE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 8;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 64;
+ dt->u.atomic.order = H5T_ORDER_LE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_2;
+
+ /* IEEE 8-byte big-endian signed integer */
+ dt = H5I_object (H5T_IEEE_S64BE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 8;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 64;
+ dt->u.atomic.order = H5T_ORDER_BE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_2;
+
+ /* IEEE 2-byte little-endian unsigned integer */
+ dt = H5I_object (H5T_IEEE_U16LE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 2;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 16;
+ dt->u.atomic.order = H5T_ORDER_LE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_NONE;
+
+ /* IEEE 2-byte big-endian unsigned integer */
+ dt = H5I_object (H5T_IEEE_U16BE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 2;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 16;
+ dt->u.atomic.order = H5T_ORDER_BE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_NONE;
+
+ /* IEEE 4-byte little-endian unsigned integer */
+ dt = H5I_object (H5T_IEEE_U32LE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 4;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 32;
+ dt->u.atomic.order = H5T_ORDER_LE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_NONE;
+
+ /* IEEE 4-byte big-endian unsigned integer */
+ dt = H5I_object (H5T_IEEE_U32BE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 4;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 32;
+ dt->u.atomic.order = H5T_ORDER_BE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_NONE;
+
+ /* IEEE 8-byte little-endian unsigned integer */
+ dt = H5I_object (H5T_IEEE_U64LE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 8;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 64;
+ dt->u.atomic.order = H5T_ORDER_LE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_NONE;
+
+ /* IEEE 8-byte big-endian unsigned integer */
+ dt = H5I_object (H5T_IEEE_U64BE_g = H5Tcopy (H5T_NATIVE_INT));
+ dt->state = H5T_STATE_IMMUTABLE;
+ dt->size = 8;
+ dt->u.atomic.offset = 0;
+ dt->u.atomic.prec = 64;
+ dt->u.atomic.order = H5T_ORDER_BE;
+ dt->u.atomic.lsb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;
+ dt->u.atomic.u.i.sign = H5T_SGN_NONE;
+
+
+ /*
* Initialize pre-defined data types that don't depend on architecture.
*/
@@ -237,6 +465,11 @@ H5T_init_interface(void)
* Register conversion functions beginning with the most general and
* ending with the most specific.
*/
+ if (H5Tregister_soft ("i_i", H5T_INTEGER, H5T_INTEGER,
+ H5T_conv_i_i) < 0) {
+ HRETURN_ERROR (H5E_DATATYPE, H5E_CANTINIT, FAIL,
+ "unable to register conversion function");
+ }
if (H5Tregister_soft("ibo", H5T_INTEGER, H5T_INTEGER,
H5T_conv_order) < 0) {
HRETURN_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL,
@@ -252,6 +485,17 @@ H5T_init_interface(void)
"unable to register conversion function");
}
+ if (H5Tregister_hard ("i32le_r64le", H5T_IEEE_U32LE_g, H5T_IEEE_R64LE_g,
+ H5T_conv_i32le_r64le)<0) {
+ HRETURN_ERROR (H5E_DATATYPE, H5E_CANTINIT, FAIL,
+ "unable to register conversion function");
+ }
+ if (H5Tregister_hard ("i32le_r64le", H5T_IEEE_S32LE_g, H5T_IEEE_R64LE_g,
+ H5T_conv_i32le_r64le)<0) {
+ HRETURN_ERROR (H5E_DATATYPE, H5E_CANTINIT, FAIL,
+ "unable to register conversion function");
+ }
+
FUNC_LEAVE(ret_value);
}
@@ -304,6 +548,10 @@ H5T_unlock_cb (void *_dt, const void __unused__ *key)
Can't report errors...
EXAMPLES
REVISION LOG
+ * Robb Matzke, 1998-06-11
+ * Statistics are only printed for conversion functions that were
+ * called.
+ *
--------------------------------------------------------------------------*/
static void
H5T_term_interface(void)
@@ -319,7 +567,8 @@ H5T_term_interface(void)
/* Unregister all conversion functions */
for (i=0; i<H5T_npath_g; i++) {
- path = H5T_path_g + i;
+ path = H5T_path_g[i];
+ assert (path);
if (path->func) {
path->cdata.command = H5T_CONV_FREE;
@@ -331,31 +580,37 @@ H5T_term_interface(void)
H5E_clear(); /*ignore the error*/
}
#ifdef H5T_DEBUG
- if (0==nprint++) {
- HDfprintf (stderr, "H5T: type conversion statistics "
- "accumulated over life of library:\n");
- HDfprintf (stderr, " %-*s %8s/%-5s %8s %8s %8s %15s\n",
- H5T_NAMELEN-1, "Name", "Elmts", "Calls", "User",
- "System", "Elapsed", "Bandwidth");
- HDfprintf (stderr, " %-*s %8s-%-5s %8s %8s %8s %15s\n",
- H5T_NAMELEN-1, "----", "-----", "-----", "----",
- "------", "-------", "---------");
+ if (path->cdata.stats->ncalls>0) {
+ if (0==nprint++) {
+ HDfprintf (stderr, "H5T: type conversion statistics "
+ "accumulated over life of library:\n");
+ HDfprintf (stderr, " %-*s %8s/%-5s %8s %8s %8s %15s\n",
+ H5T_NAMELEN-1, "Name", "Elmts", "Calls", "User",
+ "System", "Elapsed", "Bandwidth");
+ HDfprintf (stderr, " %-*s %8s-%-5s %8s %8s %8s %15s\n",
+ H5T_NAMELEN-1, "----", "-----", "-----", "----",
+ "------", "-------", "---------");
+ }
+ nbytes = MAX (H5T_get_size (path->src),
+ H5T_get_size (path->dst));
+ nbytes *= path->cdata.stats->nelmts;
+ HDfprintf (stderr,
+ " %-*s %8Hd/%-5d %8.2f %8.2f %8.2f %15g\n",
+ H5T_NAMELEN-1, path->name,
+ path->cdata.stats->nelmts,
+ path->cdata.stats->ncalls,
+ path->cdata.stats->timer.utime,
+ path->cdata.stats->timer.stime,
+ path->cdata.stats->timer.etime,
+ nbytes / path->cdata.stats->timer.etime);
}
- nbytes = MAX (H5T_get_size (path->src), H5T_get_size (path->dst));
- nbytes *= path->cdata.stats->nelmts;
- HDfprintf (stderr, " %-*s %8Hd/%-5d %8.2f %8.2f %8.2f %15g\n",
- H5T_NAMELEN-1, path->name,
- path->cdata.stats->nelmts,
- path->cdata.stats->ncalls,
- path->cdata.stats->timer.utime,
- path->cdata.stats->timer.stime,
- path->cdata.stats->timer.etime,
- nbytes / path->cdata.stats->timer.etime);
#endif
H5T_close (path->src);
H5T_close (path->dst);
H5MM_xfree (path->cdata.stats);
}
+ H5MM_xfree (path);
+ H5T_path_g[i] = NULL;
}
/* Clear conversion tables */
@@ -2424,8 +2679,8 @@ H5Tregister_hard(const char *name, hid_t src_id, hid_t dst_id, H5T_conv_t func)
* recalculated to use the new function.
*/
for (i=0; i<H5T_npath_g; i++) {
- if (path != H5T_path_g+i) {
- H5T_path_g[i].cdata.recalc = TRUE;
+ if (path != H5T_path_g[i]) {
+ H5T_path_g[i]->cdata.recalc = TRUE;
}
}
@@ -2490,7 +2745,8 @@ H5Tregister_soft(const char *name, H5T_class_t src_cls, H5T_class_t dst_cls,
/* Replace soft functions of all appropriate paths */
for (i=0; i<H5T_npath_g; i++) {
- H5T_path_t *path = H5T_path_g + i;
+ H5T_path_t *path = H5T_path_g[i];
+ assert (path);
path->cdata.recalc = TRUE;
if (path->is_hard ||
@@ -2590,7 +2846,8 @@ H5Tunregister(H5T_conv_t func)
/* Remove function from all conversion paths */
for (i=0; i<H5T_npath_g; i++) {
- path = H5T_path_g + i;
+ path = H5T_path_g[i];
+ assert (path);
if (path->func == func) {
path->func = NULL;
@@ -2709,6 +2966,65 @@ H5Tfind(hid_t src_id, hid_t dst_id, H5T_cdata_t **pcdata)
FUNC_LEAVE(ret_value);
}
+
+/*-------------------------------------------------------------------------
+ * Function: H5Tconvert
+ *
+ * Purpose: Convert NELMTS elements from type SRC_ID to type DST_ID. The
+ * source elements are packed in BUF and on return the
+ * destination will be packed in BUF. That is, the conversion
+ * is performed in place. The optional background buffer is an
+ * array of NELMTS values of destination type which are merged
+ * with the converted values to fill in cracks (for instance,
+ * BACKGROUND might be an array of structs with the `a' and `b'
+ * fields already initialized and the conversion of BUF supplies
+ * the `c' and `d' field values).
+ *
+ * Return: Success: SUCCEED
+ *
+ * Failure: FAIL
+ *
+ * Programmer: Robb Matzke
+ * Wednesday, June 10, 1998
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+herr_t
+H5Tconvert (hid_t src_id, hid_t dst_id, size_t nelmts, void *buf,
+ void *background)
+{
+ H5T_cdata_t *cdata = NULL; /*conversion data */
+ H5T_conv_t tconv_func = NULL; /*conversion function */
+ herr_t status; /*func return status */
+#ifdef H5T_DEBUG
+ H5_timer_t timer; /*conversion timer */
+#endif
+
+ FUNC_ENTER (H5Tconvert, FAIL);
+
+ if (NULL==(tconv_func=H5Tfind (src_id, dst_id, &cdata))) {
+ HRETURN_ERROR (H5E_DATATYPE, H5E_CANTINIT, FAIL,
+ "unable to convert between src and dst data types");
+ }
+
+#ifdef H5T_DEBUG
+ H5T_timer_begin (&timer, cdata);
+#endif
+ cdata->command = H5T_CONV_CONV;
+ status = (tconv_func)(src_id, dst_id, cdata, nelmts, buf, background);
+#ifdef H5T_DEBUG
+ H5T_timer_end (&timer, cdata, nelmts);
+#endif
+ if (status<0) {
+ HRETURN_ERROR (H5E_DATATYPE, H5E_CANTINIT, FAIL,
+ "data type conversion failed");
+ }
+
+ FUNC_LEAVE (SUCCEED);
+}
+
/*-------------------------------------------------------------------------
* API functions are above; library-private functions are below...
*-------------------------------------------------------------------------
@@ -3682,16 +3998,17 @@ H5T_path_find(const char *name, const H5T_t *src, const H5T_t *dst,
/* Binary search */
while (lt < rt) {
md = (lt + rt) / 2;
+ assert (H5T_path_g[md]);
- cmp = H5T_cmp(src, H5T_path_g[md].src);
- if (0 == cmp) cmp = H5T_cmp(dst, H5T_path_g[md].dst);
+ cmp = H5T_cmp(src, H5T_path_g[md]->src);
+ if (0 == cmp) cmp = H5T_cmp(dst, H5T_path_g[md]->dst);
if (cmp < 0) {
rt = md;
} else if (cmp > 0) {
lt = md + 1;
} else {
- HRETURN(H5T_path_g + md);
+ HRETURN(H5T_path_g[md]);
}
}
@@ -3700,18 +4017,17 @@ H5T_path_find(const char *name, const H5T_t *src, const H5T_t *dst,
if (H5T_npath_g >= H5T_apath_g) {
H5T_apath_g = MAX(64, 2 * H5T_apath_g);
H5T_path_g = H5MM_xrealloc(H5T_path_g,
- H5T_apath_g * sizeof(H5T_path_t));
+ H5T_apath_g * sizeof(H5T_path_t*));
}
if (cmp > 0) md++;
/* make room */
HDmemmove(H5T_path_g + md + 1, H5T_path_g + md,
- (H5T_npath_g - md) * sizeof(H5T_path_t));
+ (H5T_npath_g - md) * sizeof(H5T_path_t*));
H5T_npath_g++;
/* insert */
- path = H5T_path_g + md;
- HDmemset(path, 0, sizeof(H5T_path_t));
+ path = H5T_path_g[md] = H5MM_xcalloc (1, sizeof(H5T_path_t));
path->src = H5T_copy(src, H5T_COPY_ALL);
path->dst = H5T_copy(dst, H5T_COPY_ALL);
diff --git a/src/H5Tbit.c b/src/H5Tbit.c
new file mode 100644
index 0000000..0524dcc
--- /dev/null
+++ b/src/H5Tbit.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 1998 NCSA
+ * All rights reserved.
+ *
+ * Programmer: Robb Matzke <matzke@llnl.gov>
+ * Wednesday, June 10, 1998
+ *
+ * Purpose: Operations on bit vectors. A bit vector is an array of bytes
+ * with the least-significant bits in the first byte. That is,
+ * the bytes are in little-endian order.
+ */
+#define H5T_PACKAGE
+#include <H5private.h>
+#include <H5Tpkg.h>
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5T_bit_copy
+ *
+ * Purpose: Copies bits from one vector to another.
+ *
+ * Return: void
+ *
+ * Programmer: Robb Matzke
+ * Wednesday, June 10, 1998
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+void
+H5T_bit_copy (uint8 *dst, size_t dst_offset, const uint8 *src,
+ size_t src_offset, size_t size)
+{
+ uintn shift;
+ uintn mask_lo, mask_hi;
+ intn s_idx, d_idx;
+
+ /*
+ * Calculate shifts and masks. See diagrams below. MASK_LO in this
+ * example is 0x1f (the low five bits) and MASK_HI is 0xe0 (the high three
+ * bits). SHIFT is three since the source must be shifted right three bits
+ * to line up with the destination.
+ */
+ shift = (dst_offset%8)-(src_offset%8);
+ mask_lo = (1<<(8-shift))-1;
+ mask_hi = ((1<<shift)-1) << (8-shift);
+ s_idx = src_offset / 8;
+ d_idx = dst_offset / 8;
+
+ /*
+ * Get things rolling. This means copying bits until we're aligned on a
+ * source byte. This the following example, four bits are copied to the
+ * destination.
+ *
+ * src[s_idx]
+ * +---------------+---------------+
+ * |7 6 5 4 3 2 1 0|7 6 5 4 3 2 1 0|
+ * +---------------+---------------+
+ * ... : : : : : | | | | |
+ * ... v v v v v V V V V V
+ * ...+---------------+---------------+
+ * ...|7 6 5 4 3 2 1 0|7 6 5 4 3 2 1 0|
+ * ...+---------------+---------------+
+ * dst[d_idx+1] dst[d_idx]
+ */
+ if (src_offset%8 && size>0) {
+ }
+
+
+
+ /*
+ * The middle bits. We are aligned on a source byte which needs to be
+ * copied to two (or one in the degenerate case) destination bytes.
+ *
+ * src[s_idx]
+ * +---------------+
+ * |7 6 5 4 3 2 1 0|
+ * +---------------+
+ * | | | | | | | |
+ * V V V V V V V V
+ * +---------------+---------------+
+ * |7 6 5 4 3 2 1 0|7 6 5 4 3 2 1 0|
+ * +---------------+---------------+
+ * dst[d_idx+1] dst[d_idx]
+ *
+ */
+ for (/*void*/; size>8; size-=8, d_idx++, s_idx++) {
+ if (shift) {
+ dst[d_idx+0] &= mask_lo;
+ dst[d_idx+0] |= (src[s_idx] << shift) & mask_hi;
+ dst[d_idx+1] &= mask_hi;
+ dst[d_idx+1] |= (src[s_idx] >> (8-shift)) & mask_lo;
+ } else {
+ dst[d_idx] = src[s_idx];
+ }
+ }
+
+
+
+
+ /* Finish up */
+
+
+}
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5T_bit_set
+ *
+ * Purpose: Sets or clears bits in a contiguous region of a vector
+ * beginning at bit OFFSET and continuing for SIZE bits.
+ *
+ * Return: void
+ *
+ * Programmer: Robb Matzke
+ * Wednesday, June 10, 1998
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+void
+H5T_bit_set (uint8 *buf, size_t offset, size_t size, hbool_t value)
+{
+}
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5T_bit_find
+ *
+ * Purpose: Finds the first bit with the specified VALUE within a region
+ * of a bit vector. The region begins at OFFSET and continues
+ * for SIZE bits, but the region can be searched from the least
+ * significat end toward the most significant end with
+ *
+ * Return: Success: The position of the bit found, relative to
+ * the offset.
+ *
+ * Failure: -1
+ *
+ * Programmer: Robb Matzke
+ * Wednesday, June 10, 1998
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+ssize_t
+H5T_bit_find (uint8 *buf, size_t offset, size_t size, H5T_sdir_t direction,
+ hbool_t value)
+{
+ return -1;
+}
diff --git a/src/H5Tconv.c b/src/H5Tconv.c
index 626859d..1f2a2a5 100644
--- a/src/H5Tconv.c
+++ b/src/H5Tconv.c
@@ -7,12 +7,13 @@
*
* Purpose: Data type conversions.
*/
-#define H5T_PACKAGE /*suppress error about including H5Tpkg */
+#define H5T_PACKAGE /*suppress error about including H5Tpkg */
#include <H5Iprivate.h>
#include <H5Eprivate.h>
#include <H5MMprivate.h>
#include <H5Tpkg.h>
+#include <math.h> /*for ceil() */
/* Conversion data for H5T_conv_struct() */
typedef struct H5T_conv_struct_t {
@@ -518,3 +519,679 @@ H5T_conv_struct(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts,
FUNC_LEAVE (SUCCEED);
}
+
+/*-------------------------------------------------------------------------
+ * Function: H5T_conv_i_i
+ *
+ * Purpose: Convert one integer type to another. This is the catch-all
+ * function for integer conversions and is probably not
+ * particularly fast.
+ *
+ * Return: Success: SUCCEED
+ *
+ * Failure: FAIL
+ *
+ * Programmer: Robb Matzke
+ * Wednesday, June 10, 1998
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+herr_t
+H5T_conv_i_i (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata,
+ size_t nelmts, void *buf, void __unused__ *bkg)
+{
+ H5T_t *src = NULL; /*source data type */
+ H5T_t *dst = NULL; /*destination data type */
+ intn direction; /*direction of traversal */
+ size_t elmtno; /*element number */
+ size_t half_size; /*half the type size */
+ size_t olap; /*num overlapping elements */
+ uint8 *s, *sp, *d, *dp; /*source and dest traversal ptrs*/
+ uint8 dbuf[64]; /*temp destination buffer */
+ size_t first;
+ ssize_t sfirst; /*a signed version of `first' */
+ size_t i;
+
+ FUNC_ENTER (H5T_conv_i_i, FAIL);
+
+ switch (cdata->command) {
+ case H5T_CONV_INIT:
+ if (H5_DATATYPE!=H5I_group (src_id) ||
+ NULL==(src=H5I_object (src_id)) ||
+ H5_DATATYPE!=H5I_group (dst_id) ||
+ NULL==(dst=H5I_object (dst_id))) {
+ HRETURN_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type");
+ }
+ if (H5T_ORDER_LE!=src->u.atomic.order &&
+ H5T_ORDER_BE!=src->u.atomic.order) {
+ HRETURN_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL,
+ "unsupported byte order");
+ }
+ if (H5T_ORDER_LE!=dst->u.atomic.order &&
+ H5T_ORDER_BE!=dst->u.atomic.order) {
+ HRETURN_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL,
+ "unsupported byte order");
+ }
+ if (dst->size>sizeof dbuf) {
+ HRETURN_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL,
+ "destination size is too large");
+ }
+ break;
+
+ case H5T_CONV_FREE:
+ break;
+
+ case H5T_CONV_CONV:
+ /* Get the data types */
+ if (H5_DATATYPE!=H5I_group (src_id) ||
+ NULL==(src=H5I_object (src_id)) ||
+ H5_DATATYPE!=H5I_group (dst_id) ||
+ NULL==(dst=H5I_object (dst_id))) {
+ HRETURN_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type");
+ }
+
+ /*
+ * Do we process the values from beginning to end or vice versa? Also,
+ * how many of the elements have the source and destination areas
+ * overlapping?
+ */
+ if (src->size==dst->size) {
+ sp = dp = (uint8*)buf;
+ direction = 1;
+ olap = nelmts;
+ } else if (src->size>=dst->size) {
+ sp = dp = (uint8*)buf;
+ direction = 1;
+ olap = ceil((double)(src->size)/(src->size-dst->size))-1;
+ } else {
+ sp = (uint8*)buf + (nelmts-1) * src->size;
+ dp = (uint8*)buf + (nelmts-1) * dst->size;
+ direction = -1;
+ olap = ceil((double)(dst->size)/(dst->size-src->size))-1;
+ }
+
+ /* The conversion loop */
+ for (elmtno=0; elmtno<nelmts; elmtno++) {
+
+ /*
+ * If the source and destination buffers overlap then use a
+ * temporary buffer for the destination.
+ */
+ if (direction>0) {
+ s = sp;
+ d = elmtno<olap ? dbuf : dp;
+ } else {
+ s = sp;
+ d = elmtno >= nelmts-olap ? dbuf : dp;
+ }
+#ifndef NDEBUG
+ /* I don't quite trust the overlap calculations yet --rpm */
+ if (d==dbuf) {
+ assert ((dp>=sp && dp<sp+src->size) ||
+ (sp>=dp && sp<dp+dst->size));
+ } else {
+ assert ((dp<sp && dp+dst->size<=sp) ||
+ (sp<dp && sp+src->size<=dp));
+ }
+#endif
+
+ /*
+ * Put the data in little endian order so our loops aren't so
+ * complicated. We'll do all the conversion stuff assuming
+ * little endian and then we'll fix the order at the end.
+ */
+ if (H5T_ORDER_BE==src->u.atomic.order) {
+ half_size = src->size/2;
+ for (i=0; i<half_size; i++) {
+ uint8 tmp = s[src->size-(i+1)];
+ s[src->size-(i+1)] = s[i];
+ s[i] = tmp;
+ }
+ }
+
+ /*
+ * What is the bit number for the msb bit of S which is set? The
+ * bit number is relative to the significant part of the number.
+ */
+ sfirst = H5T_bit_find (s, src->u.atomic.offset, src->u.atomic.prec,
+ H5T_BIT_MSB, TRUE);
+ first = (size_t)first;
+
+ if (sfirst<0) {
+ /*
+ * The source has no bits set and must therefore be zero.
+ * Set the destination to zero.
+ */
+ H5T_bit_set (d, dst->u.atomic.offset, dst->u.atomic.prec,
+ FALSE);
+
+ } else if (H5T_SGN_NONE==src->u.atomic.u.i.sign &&
+ H5T_SGN_NONE==dst->u.atomic.u.i.sign) {
+ /*
+ * Source and destination are both unsigned, but if the
+ * source has more precision bits than the destination then
+ * it's possible to overflow. When overflow occurs the
+ * destination will be set to the maximum possible value.
+ */
+ if (src->u.atomic.prec <= dst->u.atomic.prec) {
+ H5T_bit_copy (d, dst->u.atomic.offset,
+ s, src->u.atomic.offset,
+ src->u.atomic.prec);
+ H5T_bit_set (d, dst->u.atomic.offset+src->u.atomic.prec,
+ dst->u.atomic.prec-src->u.atomic.prec, FALSE);
+ } else if (first>=dst->u.atomic.prec) {
+ /*overflow*/
+ H5T_bit_set (d, dst->u.atomic.offset, dst->u.atomic.prec,
+ TRUE);
+ } else {
+ H5T_bit_copy (d, dst->u.atomic.offset,
+ s, src->u.atomic.offset,
+ dst->u.atomic.prec);
+ }
+
+ } else if (H5T_SGN_2==src->u.atomic.u.i.sign &&
+ H5T_SGN_NONE==dst->u.atomic.u.i.sign) {
+ /*
+ * If the source is signed and the destination isn't then we
+ * can have overflow if the source contains more bits than
+ * the destination (destination is set to the maximum
+ * possible value) or underflow if the source is negative
+ * (destination is set to zero).
+ */
+ if (first+1 == src->u.atomic.prec) {
+ /*underflow*/
+ H5T_bit_set (d, dst->u.atomic.offset, dst->u.atomic.prec,
+ FALSE);
+ } else if (src->u.atomic.prec < dst->u.atomic.prec) {
+ H5T_bit_copy (d, dst->u.atomic.offset,
+ s, src->u.atomic.offset,
+ src->u.atomic.prec-1);
+ H5T_bit_set (d, dst->u.atomic.offset+src->u.atomic.prec-1,
+ (dst->u.atomic.prec-src->u.atomic.prec)+1,
+ FALSE);
+ } else if (first>=dst->u.atomic.prec) {
+ /*overflow*/
+ H5T_bit_set (d, dst->u.atomic.offset, dst->u.atomic.prec,
+ TRUE);
+ } else {
+ H5T_bit_copy (d, dst->u.atomic.offset,
+ s, src->u.atomic.offset,
+ dst->u.atomic.prec);
+ }
+
+ } else if (H5T_SGN_NONE==src->u.atomic.u.i.sign &&
+ H5T_SGN_2==dst->u.atomic.u.i.sign) {
+ /*
+ * If the source is not signed but the destination is then
+ * overflow can occur in which case the destination is set to
+ * the largest possible value (all bits set except the msb).
+ */
+ if (first+1 >= dst->u.atomic.prec) {
+ /*overflow*/
+ H5T_bit_set (d, dst->u.atomic.offset,
+ dst->u.atomic.prec-1, TRUE);
+ H5T_bit_set (d, dst->u.atomic.offset+dst->u.atomic.prec-1,
+ 1, FALSE);
+ } else if (src->u.atomic.prec<dst->u.atomic.prec) {
+ H5T_bit_copy (d, dst->u.atomic.offset,
+ s, src->u.atomic.offset,
+ src->u.atomic.prec);
+ H5T_bit_set (d, dst->u.atomic.offset+src->u.atomic.prec,
+ dst->u.atomic.prec-src->u.atomic.prec, FALSE);
+ } else {
+ H5T_bit_copy (d, dst->u.atomic.offset,
+ s, src->u.atomic.offset,
+ dst->u.atomic.prec);
+ }
+
+ } else if (first+1 == src->u.atomic.prec) {
+ /*
+ * Both the source and the destination are signed and the
+ * source value is negative. We could experience underflow
+ * if the destination isn't wide enough in which case the
+ * destination is set to a negative number with the largest
+ * possible magnitude.
+ */
+ ssize_t sfz = H5T_bit_find (s, src->u.atomic.offset,
+ src->u.atomic.prec-1, H5T_BIT_MSB,
+ FALSE);
+ size_t fz = (size_t)sfz;
+
+ if (sfz>=0 && fz+2>=dst->u.atomic.prec) {
+ /*underflow*/
+ H5T_bit_set (d, dst->u.atomic.offset, dst->u.atomic.prec-1,
+ FALSE);
+ H5T_bit_set (d, dst->u.atomic.offset+dst->u.atomic.prec-1,
+ 1, TRUE);
+ } else if (src->u.atomic.prec<dst->u.atomic.prec) {
+ H5T_bit_copy (d, dst->u.atomic.offset,
+ s, src->u.atomic.offset,
+ src->u.atomic.prec);
+ H5T_bit_set (d, dst->u.atomic.offset+src->u.atomic.prec,
+ dst->u.atomic.prec-src->u.atomic.prec, TRUE);
+ } else {
+ H5T_bit_copy (d, dst->u.atomic.offset,
+ s, src->u.atomic.offset,
+ dst->u.atomic.prec);
+ }
+
+ } else {
+ /*
+ * Source and destination are both signed but the source
+ * value is positive. We could have an overflow in which
+ * case the destination is set to the largest possible
+ * positive value.
+ */
+ if (first+2>=dst->u.atomic.prec) {
+ /*overflow*/
+ H5T_bit_set (d, dst->u.atomic.offset, dst->u.atomic.prec-1,
+ TRUE);
+ H5T_bit_set (d, dst->u.atomic.offset+dst->u.atomic.prec-1,
+ 1, FALSE);
+ } else if (src->u.atomic.prec<dst->u.atomic.prec) {
+ H5T_bit_copy (d, dst->u.atomic.offset,
+ s, src->u.atomic.offset,
+ src->u.atomic.prec);
+ H5T_bit_set (d, dst->u.atomic.offset+src->u.atomic.prec,
+ dst->u.atomic.prec-src->u.atomic.prec, FALSE);
+ }
+ }
+
+ /*
+ * Set padding areas in destination.
+ */
+ if (dst->u.atomic.offset>0) {
+ assert (H5T_PAD_ZERO==dst->u.atomic.lsb_pad ||
+ H5T_PAD_ONE==dst->u.atomic.lsb_pad);
+ H5T_bit_set (d, 0, dst->u.atomic.offset,
+ H5T_PAD_ONE==dst->u.atomic.lsb_pad);
+ }
+ if (dst->u.atomic.offset+dst->u.atomic.prec!=8*dst->size) {
+ assert (H5T_PAD_ZERO==dst->u.atomic.msb_pad ||
+ H5T_PAD_ONE==dst->u.atomic.msb_pad);
+ H5T_bit_set (d, dst->u.atomic.offset+dst->u.atomic.prec,
+ 8*dst->size - (dst->u.atomic.offset+
+ dst->u.atomic.prec),
+ H5T_PAD_ONE==dst->u.atomic.msb_pad);
+ }
+
+ /*
+ * Put the destination in the correct byte order. See note at
+ * beginning of loop.
+ */
+ if (H5T_ORDER_BE==dst->u.atomic.order) {
+ half_size = dst->size/2;
+ for (i=0; i<half_size; i++) {
+ uint8 tmp = d[dst->size-(i+1)];
+ d[dst->size-(i+1)] = d[i];
+ d[i] = tmp;
+ }
+ }
+
+ /*
+ * If we had used a temporary buffer for the destination then we
+ * should copy the value to the true destination buffer.
+ */
+ if (d==dbuf) HDmemcpy (dp, d, dst->size);
+
+ next:
+ sp += direction * src->size;
+ dp += direction * dst->size;
+ }
+
+ break;
+
+ default:
+ HRETURN_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL,
+ "unknown conversion command");
+ }
+
+ FUNC_LEAVE (SUCCEED);
+}
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5T_conv_i32le_r64le
+ *
+ * Purpose: Converts 4-byte little-endian integers (signed or unsigned)
+ * to 8-byte litte-endian IEEE floating point.
+ *
+ * Return: Success: SUCCEED
+ *
+ * Failure: FAIL
+ *
+ * Programmer: Robb Matzke
+ * Wednesday, June 10, 1998
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+herr_t
+H5T_conv_i32le_r64le (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata,
+ size_t nelmts, void *buf, void __unused__ *bkg)
+{
+ uint8 *s=NULL, *d=NULL; /*src and dst buf pointers */
+ uint8 tmp[8]; /*temporary destination buffer */
+ H5T_t *src = NULL; /*source data type */
+ H5T_t *dst = NULL; /*destination data type */
+ size_t elmtno; /*element counter */
+ uintn sign; /*sign bit */
+ uintn cin, cout; /*carry in/out */
+ uintn mbits=0; /*mantissa bits */
+ uintn exponent; /*exponent */
+ intn i; /*counter */
+
+ FUNC_ENTER (H5T_conv_i32le_r64le, FAIL);
+
+ switch (cdata->command) {
+ case H5T_CONV_INIT:
+ assert (sizeof(intn)>=4);
+ break;
+
+ case H5T_CONV_FREE:
+ /* Free private data */
+ break;
+
+ case H5T_CONV_CONV:
+ /* The conversion */
+ if (H5_DATATYPE!=H5I_group (src_id) ||
+ NULL==(src=H5I_object (src_id)) ||
+ H5_DATATYPE!=H5I_group (dst_id) ||
+ NULL==(dst=H5I_object (dst_id))) {
+ HRETURN_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type");
+ }
+
+ s = (uint8*)buf + 4*(nelmts-1);
+ d = (uint8*)buf + 8*(nelmts-1);
+ for (elmtno=0; elmtno<nelmts; elmtno++, s-=4, d-=8) {
+
+ /*
+ * If this is the last element to convert (that is, the first
+ * element of the buffer) then the source and destination areas
+ * overlap so we need to use a temp buf for the destination.
+ */
+ if (s==buf) d = tmp;
+
+ /* Convert the integer to a sign and magnitude */
+ switch (src->u.atomic.u.i.sign) {
+ case H5T_SGN_NONE:
+ sign = 0;
+ break;
+ case H5T_SGN_2:
+ if (s[3] & 0x80) {
+ sign = 1 ;
+ for (i=0,cin=1; i<4; i++,cin=cout) {
+ s[i] = ~s[i] ;
+ cout = ((unsigned)(s[i])+cin > 0xff) ? 1 : 0 ;
+ s[i] += cin ;
+ }
+ } else {
+ sign = 0;
+ }
+ break;
+ default:
+ HRETURN_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL,
+ "unsupported integer sign method");
+ }
+
+ /*
+ * Where is the most significant bit that is set? We could do
+ * this in a loop, but testing it this way might be faster.
+ */
+ if (s[3]) {
+ if (s[3] & 0x80) mbits = 32 ;
+ else if (s[3] & 0x40) mbits = 31 ;
+ else if (s[3] & 0x20) mbits = 30 ;
+ else if (s[3] & 0x10) mbits = 29 ;
+ else if (s[3] & 0x08) mbits = 28 ;
+ else if (s[3] & 0x04) mbits = 27 ;
+ else if (s[3] & 0x02) mbits = 26 ;
+ else if (s[3] & 0x01) mbits = 25 ;
+ } else if (s[2]) {
+ if (s[2] & 0x80) mbits = 24 ;
+ else if (s[2] & 0x40) mbits = 23 ;
+ else if (s[2] & 0x20) mbits = 22 ;
+ else if (s[2] & 0x10) mbits = 21 ;
+ else if (s[2] & 0x08) mbits = 20 ;
+ else if (s[2] & 0x04) mbits = 19 ;
+ else if (s[2] & 0x02) mbits = 18 ;
+ else if (s[2] & 0x01) mbits = 17 ;
+ } else if (s[1]) {
+ if (s[1] & 0x80) mbits = 16 ;
+ else if (s[1] & 0x40) mbits = 15 ;
+ else if (s[1] & 0x20) mbits = 14 ;
+ else if (s[1] & 0x10) mbits = 13 ;
+ else if (s[1] & 0x08) mbits = 12 ;
+ else if (s[1] & 0x04) mbits = 11 ;
+ else if (s[1] & 0x02) mbits = 10 ;
+ else if (s[1] & 0x01) mbits = 9 ;
+ } else if (s[0]) {
+ if (s[0] & 0x80) mbits = 8 ;
+ else if (s[0] & 0x40) mbits = 7 ;
+ else if (s[0] & 0x20) mbits = 6 ;
+ else if (s[0] & 0x10) mbits = 5 ;
+ else if (s[0] & 0x08) mbits = 4 ;
+ else if (s[0] & 0x04) mbits = 3 ;
+ else if (s[0] & 0x02) mbits = 2 ;
+ else if (s[0] & 0x01) mbits = 1 ;
+ } else {
+ /*zero*/
+ d[7] = d[6] = d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ continue ;
+ }
+
+ /*
+ * The sign and exponent.
+ */
+ exponent = (mbits - 1) + 1023 ;
+ d[7] = (sign<<7) | ((exponent>>4) & 0x7f) ;
+ d[6] = (exponent & 0x0f) << 4 ;
+
+ /*
+ * The mantissa.
+ */
+ switch (mbits) {
+ case 32:
+ d[5] = d[4] = d[3] = d[1] = d[0] = 0 ;
+ break ;
+ case 31:
+ d[6] |= 0x0f & (s[3]>>2) ;
+ d[5] = (s[3]<<6) | (s[2]>>2) ;
+ d[4] = (s[2]<<6) | (s[1]>>2) ;
+ d[3] = (s[1]<<6) | (s[0]>>2) ;
+ d[2] = (s[0]<<6) ;
+ d[1] = d[0] = 0 ;
+ break ;
+ case 30:
+ d[6] |= 0x0f & (s[3]>>1) ;
+ d[5] = (s[3]<<7) | (s[2]>>1) ;
+ d[4] = (s[2]<<7) | (s[1]>>1) ;
+ d[3] = (s[1]<<7) | (s[0]>>1) ;
+ d[2] = (s[0]<<7) ;
+ d[1] = d[0] = 0 ;
+ break ;
+ case 29:
+ d[6] |= 0x0f & s[3] ;
+ d[5] = s[2] ;
+ d[4] = s[1] ;
+ d[3] = s[0] ;
+ d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 28:
+ d[6] |= ((s[3]<<1) | (s[2]>>7)) & 0x0f ;
+ d[5] = (s[2]<<1) | (s[1]>>7) ;
+ d[4] = (s[1]<<1) | (s[0]>>7) ;
+ d[3] = (s[0]<<1) ;
+ d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 27:
+ d[6] |= ((s[3]<<2) | (s[2]>>6)) & 0x0f ;
+ d[5] = (s[2]<<2) | (s[1]>>6) ;
+ d[4] = (s[1]<<2) | (s[0]>>6) ;
+ d[3] = (s[0]<<2) ;
+ d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 26:
+ d[6] |= ((s[3]<<3) | (s[2]>>5)) & 0x0f ;
+ d[5] = (s[2]<<3) | (s[1]>>5) ;
+ d[4] = (s[1]<<3) | (s[0]>>5) ;
+ d[3] = (s[0]<<3) ;
+ d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 25:
+ d[6] |= 0x0f & (s[2]>>4) ;
+ d[5] = (s[2]<<4) | (s[1]>>4) ;
+ d[4] = (s[1]<<4) | (s[0]>>4) ;
+ d[3] = (s[0]<<4) ;
+ d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 24:
+ d[6] |= 0x0f & (s[2]>>3) ;
+ d[5] = (s[2]<<5) | (s[1]>>3) ;
+ d[4] = (s[1]<<5) | (s[0]>>3) ;
+ d[3] = (s[0]<<5) ;
+ d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 23:
+ d[6] |= 0x0f & (s[2]>>2) ;
+ d[5] = (s[2]<<6) | (s[1]>>2) ;
+ d[4] = (s[1]<<6) | (s[0]>>2) ;
+ d[3] = (s[0]<<6) ;
+ d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 22:
+ d[6] |= 0x0f & (s[2]>>1) ;
+ d[5] = (s[2]<<7) | (s[1]>>1) ;
+ d[4] = (s[1]<<7) | (s[0]>>1) ;
+ d[3] = (s[0]<<7) ;
+ d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 21:
+ d[6] |= 0x0f & s[2] ;
+ d[5] = s[1] ;
+ d[4] = s[0] ;
+ d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 20:
+ d[6] |= ((s[2]<<1) | (s[1]>>7)) & 0x0f ;
+ d[5] = (s[1]<<1) | (s[0]>>7) ;
+ d[4] = (s[0]<<1) ;
+ d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 19:
+ d[6] |= ((s[2]<<2) | (s[1]>>6)) & 0x0f ;
+ d[5] = (s[1]<<2) | (s[0]>>6) ;
+ d[4] = (s[0]<<2) ;
+ d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 18:
+ d[6] |= ((s[2]<<3) | (s[1]>>5)) & 0x0f ;
+ d[5] = (s[1]<<3) | (s[0]>>5) ;
+ d[4] = (s[0]<<3) ;
+ d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 17:
+ d[6] |= 0x0f & (s[1]>>4) ;
+ d[5] = (s[1]<<4) | (s[0]>>4) ;
+ d[4] = (s[0]<<4) ;
+ d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 16:
+ d[6] |= 0x0f & (s[1]>>3) ;
+ d[5] = (s[1]<<5) | (s[0]>>3) ;
+ d[4] = (s[0]<<5) ;
+ d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 15:
+ d[6] |= 0x0f & (s[1]>>2) ;
+ d[5] = (s[1]<<6) | (s[0]>>2) ;
+ d[4] = (s[0]<<6) ;
+ d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 14:
+ d[6] |= 0x0f & (s[1]>>1) ;
+ d[5] = (s[1]<<7) | (s[0]>>1) ;
+ d[4] = (s[0]<<7) ;
+ d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 13:
+ d[6] |= 0x0f & s[1] ;
+ d[5] = s[0] ;
+ d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 12:
+ d[6] |= ((s[1]<<1) | (s[0]>>7)) & 0x0f ;
+ d[5] = (s[0]<<1) ;
+ d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 11:
+ d[6] |= ((s[1]<<2) | (s[0]>>6)) & 0x0f ;
+ d[5] = (s[0]<<2) ;
+ d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 10:
+ d[6] |= ((s[1]<<3) | (s[0]>>5)) & 0x0f ;
+ d[5] = (s[0]<<3) ;
+ d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 9:
+ d[6] |= 0x0f & (s[0]>>4) ;
+ d[5] = (s[0]<<4) ;
+ d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 8:
+ d[6] |= 0x0f & (s[0]>>3) ;
+ d[5] = (s[0]<<5) ;
+ d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 7:
+ d[6] |= 0x0f & (s[0]>>2) ;
+ d[5] = (s[0]<<6) ;
+ d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 6:
+ d[6] |= 0x0f & (s[0]>>1) ;
+ d[5] = (s[0]<<7) ;
+ d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 5:
+ d[6] |= 0x0f & s[0] ;
+ d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 4:
+ d[6] |= (s[0]<<1) & 0x0f ;
+ d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 3:
+ d[6] |= (s[0]<<2) & 0x0f ;
+ d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 2:
+ d[6] |= (s[0]<<3) & 0x0f ;
+ d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ case 1:
+ d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0 ;
+ break ;
+ }
+
+ /*
+ * Copy temp buffer to the destination. This only happens for
+ * the first value in the array, the last value processed. See
+ * beginning of loop.
+ */
+ if (d==tmp) HDmemcpy (s, d, 8);
+ }
+ break;
+
+ default:
+ /* Some other command we don't know about yet.*/
+ HRETURN_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL,
+ "unknown conversion command");
+ }
+
+ FUNC_LEAVE (SUCCEED);
+}
diff --git a/src/H5Tpkg.h b/src/H5Tpkg.h
index dea8b48..fc67908 100644
--- a/src/H5Tpkg.h
+++ b/src/H5Tpkg.h
@@ -110,6 +110,12 @@ typedef struct H5T_soft_t {
H5T_conv_t func; /*the conversion function */
} H5T_soft_t;
+/* Bit search direction */
+typedef enum H5T_sdir_t {
+ H5T_BIT_LSB, /*search lsb toward msb */
+ H5T_BIT_MSB /*search msb toward lsb */
+} H5T_sdir_t;
+
/* Function prototypes for H5T package scope */
H5T_path_t *H5T_path_find (const char *name, const H5T_t *src,
const H5T_t *dst, hbool_t create, H5T_conv_t func);
@@ -119,6 +125,16 @@ herr_t H5T_conv_order (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata,
size_t nelmts, void *_buf, void *bkg);
herr_t H5T_conv_struct (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata,
size_t nelmts, void *_buf, void *bkg);
-
+herr_t H5T_conv_i_i (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata,
+ size_t nelmts, void *_buf, void __unused__ *bkg);
+herr_t H5T_conv_i32le_r64le (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata,
+ size_t nelmts, void *_buf, void __unused__ *bkg);
+
+/* Bit twiddling functions */
+void H5T_bit_copy (uint8 *dst, size_t dst_offset, const uint8 *src,
+ size_t src_offset, size_t size);
+void H5T_bit_set (uint8 *buf, size_t offset, size_t size, hbool_t value);
+ssize_t H5T_bit_find (uint8 *buf, size_t offset, size_t size,
+ H5T_sdir_t direction, hbool_t value);
#endif
diff --git a/src/H5Tpublic.h b/src/H5Tpublic.h
index 1d7885a..bc1d9bd 100644
--- a/src/H5Tpublic.h
+++ b/src/H5Tpublic.h
@@ -119,7 +119,7 @@ typedef struct H5T_cdata_t {
typedef herr_t (*H5T_conv_t) (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata,
size_t nelmts, void *buf, void *bkg);
-/* The predefined types */
+/* The predefined native types */
#define H5T_NATIVE_CHAR (H5open(), H5T_NATIVE_CHAR_g)
#define H5T_NATIVE_UCHAR (H5open(), H5T_NATIVE_UCHAR_g)
#define H5T_NATIVE_SHORT (H5open(), H5T_NATIVE_SHORT_g)
@@ -147,9 +147,29 @@ typedef herr_t (*H5T_conv_t) (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata,
#define H5T_NATIVE_BITFIELD (H5open(), H5T_NATIVE_BITFIELD_g)
#define H5T_NATIVE_OPAQUE (H5open(), H5T_NATIVE_OPAQUE_g)
+/* The predefined standard types */
+#define H5T_IEEE_R32LE (H5open(), H5T_IEEE_R32LE_g)
+#define H5T_IEEE_R32BE (H5open(), H5T_IEEE_R32BE_g)
+#define H5T_IEEE_R64LE (H5open(), H5T_IEEE_R64LE_g)
+#define H5T_IEEE_R64BE (H5open(), H5T_IEEE_R64BE_g)
+#define H5T_IEEE_U16LE (H5open(), H5T_IEEE_U16LE_g)
+#define H5T_IEEE_U16BE (H5open(), H5T_IEEE_U16BE_g)
+#define H5T_IEEE_U32LE (H5open(), H5T_IEEE_U32LE_g)
+#define H5T_IEEE_U32BE (H5open(), H5T_IEEE_U32BE_g)
+#define H5T_IEEE_U64LE (H5open(), H5T_IEEE_U64LE_g)
+#define H5T_IEEE_U64BE (H5open(), H5T_IEEE_U64BE_g)
+#define H5T_IEEE_S16LE (H5open(), H5T_IEEE_S16LE_g)
+#define H5T_IEEE_S16BE (H5open(), H5T_IEEE_S16BE_g)
+#define H5T_IEEE_S32LE (H5open(), H5T_IEEE_S32LE_g)
+#define H5T_IEEE_S32BE (H5open(), H5T_IEEE_S32BE_g)
+#define H5T_IEEE_S64LE (H5open(), H5T_IEEE_S64LE_g)
+#define H5T_IEEE_S64BE (H5open(), H5T_IEEE_S64BE_g)
+
#ifdef __cplusplus
extern "C" {
#endif
+
+/* Native types */
extern hid_t H5T_NATIVE_CHAR_g;
extern hid_t H5T_NATIVE_UCHAR_g;
extern hid_t H5T_NATIVE_SHORT_g;
@@ -177,6 +197,26 @@ extern hid_t H5T_NATIVE_STRING_g;
extern hid_t H5T_NATIVE_BITFIELD_g;
extern hid_t H5T_NATIVE_OPAQUE_g;
+/* Standard types */
+extern hid_t H5T_IEEE_R32LE_g; /*IEEE 4-byte little-endian float */
+extern hid_t H5T_IEEE_R32BE_g; /*IEEE 4-byte big-endian float */
+extern hid_t H5T_IEEE_R64LE_g; /*IEEE 8-byte little-endian float */
+extern hid_t H5T_IEEE_R64BE_g; /*IEEE 8-byte big endian float */
+extern hid_t H5T_IEEE_U16LE_g; /*IEEE 2-byte little-endian unsigned int */
+extern hid_t H5T_IEEE_U16BE_g; /*IEEE 2-byte big-endian unsigned int */
+extern hid_t H5T_IEEE_U32LE_g; /*IEEE 4-byte little-endian unsigned int */
+extern hid_t H5T_IEEE_U32BE_g; /*IEEE 4-byte big-endian unsigned int */
+extern hid_t H5T_IEEE_U64LE_g; /*IEEE 8-byte little-endian unsigned int */
+extern hid_t H5T_IEEE_U64BE_g; /*IEEE 8-byte big-endian unsigned int */
+extern hid_t H5T_IEEE_S16LE_g; /*IEEE 2-byte little-endian signed int */
+extern hid_t H5T_IEEE_S16BE_g; /*IEEE 2-byte big-endian signed int */
+extern hid_t H5T_IEEE_S32LE_g; /*IEEE 4-byte little-endian signed int */
+extern hid_t H5T_IEEE_S32BE_g; /*IEEE 4-byte big-endian signed int */
+extern hid_t H5T_IEEE_S64LE_g; /*IEEE 8-byte little-endian signed int */
+extern hid_t H5T_IEEE_S64BE_g; /*IEEE 8-byte big-endian signed int */
+
+
+
/* Operations defined on all data types */
hid_t H5Topen (hid_t loc_id, const char *name);
hid_t H5Tcreate (H5T_class_t type, size_t size);
@@ -238,6 +278,8 @@ herr_t H5Tregister_soft (const char *name, H5T_class_t src, H5T_class_t dst,
H5T_conv_t func);
herr_t H5Tunregister (H5T_conv_t func);
H5T_conv_t H5Tfind (hid_t src_id, hid_t dst_id, H5T_cdata_t **pcdata);
+herr_t H5Tconvert (hid_t src_id, hid_t dst_id, size_t nelmts, void *buf,
+ void *background);
#ifdef __cplusplus
}
diff --git a/src/H5detect.c b/src/H5detect.c
index 9b7959b..6b47a85 100644
--- a/src/H5detect.c
+++ b/src/H5detect.c
@@ -313,7 +313,7 @@ H5T_init (void)\n\
dt->u.atomic.order = H5T_ORDER_%s;\n\
dt->u.atomic.prec = %d;\n\
dt->u.atomic.lsb_pad = H5T_PAD_ZERO;\n\
- dt->u.atomic.lsb_pad = H5T_PAD_ZERO;\n",
+ dt->u.atomic.msb_pad = H5T_PAD_ZERO;\n",
d[i].msize ? "FLOAT" : "INTEGER", /*class */
d[i].size + abs(d[i].padding), /*size */
d[i].perm[0] ? "BE" : "LE", /*byte order */
diff --git a/src/Makefile.in b/src/Makefile.in
index 451a66d..2ac1511 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -14,14 +14,12 @@ LIB=libhdf5.a
PROGS=debug h5ls h5repart
# Source and object files for the library (lexicographically)...
-PARALLEL_SRC=
-
LIB_SRC=H5.c H5A.c H5AC.c H5B.c H5D.c H5E.c H5F.c H5Farray.c H5Fcore.c \
- H5Ffamily.c H5Fistore.c H5Flow.c H5Fmpio.c H5Fsec2.c H5Fsplit.c H5Fstdio.c \
- H5G.c H5Gent.c H5Gnode.c H5Gstab.c H5HG.c H5HL.c H5I.c H5MF.c H5MM.c H5O.c \
- H5Oattr.c H5Ocomp.c H5Ocont.c H5Odtype.c H5Oefl.c H5Olayout.c H5Oname.c \
- H5Onull.c H5Osdspace.c H5Oshared.c H5Ostab.c H5P.c H5S.c H5Ssimp.c H5T.c \
- H5Tconv.c H5Tinit.c H5V.c H5Z.c @PARALLEL_SRC@
+ H5Ffamily.c H5Fistore.c H5Flow.c H5Fmpio.c H5Fsec2.c H5Fsplit.c \
+ H5Fstdio.c H5G.c H5Gent.c H5Gnode.c H5Gstab.c H5HG.c H5HL.c H5I.c H5MF.c \
+ H5MM.c H5O.c H5Oattr.c H5Ocomp.c H5Ocont.c H5Odtype.c H5Oefl.c \
+ H5Olayout.c H5Oname.c H5Onull.c H5Osdspace.c H5Oshared.c H5Ostab.c H5P.c \
+ H5S.c H5Ssimp.c H5T.c H5Tbit.c H5Tconv.c H5Tinit.c H5V.c H5Z.c
LIB_OBJ=$(LIB_SRC:.c=.o)
diff --git a/test/dtypes.c b/test/dtypes.c
index eed8a29..e3d300f 100644
--- a/test/dtypes.c
+++ b/test/dtypes.c
@@ -499,6 +499,75 @@ test_named (void)
/*-------------------------------------------------------------------------
+ * Function: test_conv_num
+ *
+ * Purpose: Test atomic number conversions.
+ *
+ * Return: Success:
+ *
+ * Failure:
+ *
+ * Programmer: Robb Matzke
+ * Wednesday, June 10, 1998
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+test_conv_num (void)
+{
+ const size_t ntests=1;
+ const size_t nelmts=1;
+
+ size_t i, j;
+ void *buf=NULL, *saved=NULL;
+
+ printf ("%-70s", "Testing atomic number conversions");
+
+ /* Allocate buffers */
+ buf = malloc (nelmts*8);
+ saved = malloc (nelmts*8);
+
+ for (i=0; i<ntests; i++) {
+
+ /* Start with NATIVE_INT */
+ for (j=0; j<nelmts; j++) ((int*)buf)[j] = rand();
+ memcpy (saved, buf, nelmts*sizeof(int));
+
+ /* Convert there and back */
+ if (H5Tconvert (H5T_NATIVE_INT, H5T_IEEE_S64LE, nelmts, buf,
+ NULL)<0) goto error;
+ if (H5Tconvert (H5T_IEEE_S64LE, H5T_NATIVE_INT, nelmts, buf,
+ NULL)<0) goto error;
+
+ /* Check results */
+ for (j=0; j<nelmts; j++) {
+ if (((int*)buf)[j]!=((int*)saved)[j]) {
+ puts ("*FAILED*");
+ printf (" Test %lu, elmt %lu, got %d instead of %d\n",
+ (unsigned long)i, (unsigned long)j,
+ ((int*)buf)[j], ((int*)saved)[j]);
+ goto error;
+ }
+ }
+ }
+
+ puts (" PASSED");
+ free (buf);
+ free (saved);
+ return 0;
+
+ error:
+ if (buf) free (buf);
+ if (saved) free (saved);
+ return -1;
+}
+
+
+
+
+/*-------------------------------------------------------------------------
* Function: main
*
* Purpose: Test the data type interface.
@@ -528,7 +597,10 @@ main(void)
nerrors += test_compound()<0 ? 1 : 0;
nerrors += test_transient ()<0 ? 1 : 0;
nerrors += test_named ()<0 ? 1 : 0;
-
+#if 0
+ nerrors += test_conv_num ()<0 ? 1 : 0;
+#endif
+
if (nerrors) {
printf("***** %d DATA TYPE TEST%s FAILED! *****\n",
nerrors, 1 == nerrors ? "" : "S");
generated by cgit v0.12 at 2024-11-07 16:53:29 (GMT)