[svn-r24201] Merged changes from trunk revisions 23431, 23527 and 24077.

Switched default to link to shared lib files when HDF5 is configure with --disable-static.
This addressed HDFFV-8141, h5cc failed because it defaulted to link to lib*.a files which
aren't built with --disable-static.
-help message also updated.

Tested in trunk.
Merged code tested with h5committest.

3 files changed, 74 insertions, 31 deletions

diff --git a/c++/src/h5c++.in b/c++/src/h5c++.in
index 20435eb..a4aaf52 100644
--- a/c++/src/h5c++.in
+++ b/c++/src/h5c++.in
@@ -83,11 +83,12 @@ CXXLINKERBASE="@CXX@"
 # CXXFLAGS, CPPFLAGS and LDFLAGS are reserved for use by the script user.
 # FLAGS brought from the hdf5 build are put in H5BLD_*FLAGS.
 
-# User's CPPFLAGS and CXXFLAGS come after their H5BLD counterparts to override
-# them.  User's LDFLAGS come just before clibpath, user's LIBS come after
-# $link_objs and before the hdf5 libraries in $link_args, followed by any
-# external library paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS
-# or LIBS carried in from the hdf5 build.
+# User's CPPFLAGS and CXXFLAGS come after their H5BLD counterparts.  User's
+# LDFLAGS come just before clibpath, user's LIBS come after $link_objs and
+# before the hdf5 libraries in $link_args, followed by any external library
+# paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in
+# from the hdf5 build. The order of the flags is intended to give precedence
+# to the user's flags.
 H5BLD_CXXFLAGS="@AM_CXXFLAGS@ @CXXFLAGS@"
 H5BLD_CPPFLAGS="@AM_CPPFLAGS@ @CPPFLAGS@"
 H5BLD_LDFLAGS="@AM_LDFLAGS@ @LDFLAGS@"
@@ -100,7 +101,16 @@ CPPFLAGS="${HDF5_CPPFLAGS:-$CPPFLAGSBASE}"
 LDFLAGS="${HDF5_LDFLAGS:-$LDFLAGSBASE}"
 LIBS="${HDF5_LIBS:-$LIBSBASE}"
 
-USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}"
+# If a static library is available, the default will be to use it.  If the only
+# available library is shared, it will be used by default.  The user can
+# override either default, although choosing an unavailable library will result
+# in link errors.
+STATIC_AVAILABLE="@enable_static@"
+if test "${STATIC_AVAILABLE}" = "yes"; then
+  USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}"
+else
+  USE_SHARED_LIB="${HDF5_USE_SHLIB:-yes}"
+fi
 
 usage() {
   # A wonderfully informative "usage" message.
@@ -112,8 +122,10 @@ usage() {
   echo "                   subdirectories [default: $prefix]"
   echo "    -show        Show the commands without executing them"
   echo "    -showconfig  Show the HDF5 library configuration summary"
-  echo "    -shlib       Compile with shared HDF5 libraries"
-  echo "    -noshlib     Compile with static HDF5 libraries [default]"
+  echo "    -shlib       Compile with shared HDF5 libraries [default for hdf5 built"
+  echo "                                                     without static libraries]"
+  echo "    -noshlib     Compile with static HDF5 libraries [default for hdf5 built"
+  echo "                                                     with static libraries]"
   echo " "
   echo "  <compile line>  - the normal compile line options for your compiler."
   echo "                    $prog_name uses the same compiler you used to compile"
@@ -126,6 +138,9 @@ usage() {
   echo " "
   echo "   HDF5_CXX                 -  use a different C++ compiler"
   echo "   HDF5_CXXLINKER           -  use a different linker"
+  echo "   HDF5_USE_SHLIB=[yes|no]  -  use shared or static version of the HDF5 library"
+  echo "                                 [default: no except when built with only"
+  echo "                                           shared libraries]"
   echo " You can also add or change paths and flags to the compile line using"
   echo " the following environment varibles or by assigning them to their counterparts"
   echo " in the 'Things You Can Modify to Override...'" section of $prog_name
@@ -365,11 +380,12 @@ if test "x$do_link" = "xyes"; then
   # module. It's okay if they're included twice in the compile line.
   link_args="$link_args $H5BLD_LDFLAGS $H5BLD_LIBS"
 
-  # User's CPPFLAGS and CXXFLAGS come after their H5BLD counterparts to override
-  # them.  User's LDFLAGS come just before clibpath, user's LIBS come after
-  # $link_objs and before the hdf5 libraries in $link_args, followed by any
-  # external library paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS
-  # or LIBS carried in from the hdf5 build.
+  # User's CPPFLAGS and CXXFLAGS come after their H5BLD counterparts.  User's
+  # LDFLAGS come just before clibpath, user's LIBS come after $link_objs and
+  # before the hdf5 libraries in $link_args, followed by any external library
+  # paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in
+  # from the hdf5 build. The order of the flags is intended to give precedence
+  # to the user's flags.
 
   $SHOW $CXXLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CXXFLAGS $CXXFLAGS $LDFLAGS $clibpath $link_objs $LIBS $link_args $shared_link
 
diff --git a/fortran/src/h5fc.in b/fortran/src/h5fc.in
index b220e8b..b5a6486 100644
--- a/fortran/src/h5fc.in
+++ b/fortran/src/h5fc.in
@@ -97,7 +97,16 @@ FCFLAGS="${HDF5_FCFLAGS:-$FCFLAGSBASE}"
 LDFLAGS="${HDF5_LDFLAGS:-$LDFLAGSBASE}"
 LIBS="${HDF5_LIBS:-$LIBSBASE}"
 
-USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}"
+# If a static library is available, the default will be to use it.  If the only
+# available library is shared, it will be used by default.  The user can
+# override either default, although choosing an unavailable library will result
+# in link errors.
+STATIC_AVAILABLE="@enable_static@"
+if test "${STATIC_AVAILABLE}" = "yes"; then
+  USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}"
+else
+  USE_SHARED_LIB="${HDF5_USE_SHLIB:-yes}"
+fi
 
 usage() {
   # A wonderfully informative "usage" message.
@@ -109,8 +118,10 @@ usage() {
   echo "                   subdirectories [default: $prefix]"
   echo "    -show        Show the commands without executing them"
   echo "    -showconfig  Show the HDF5 library configuration summary"
-  echo "    -shlib       Compile with shared HDF5 libraries"
-  echo "    -noshlib     Compile with static HDF5 libraries [default]"
+  echo "    -shlib       Compile with shared HDF5 libraries [default for hdf5 built"
+  echo "                                                     without static libraries]"
+  echo "    -noshlib     Compile with static HDF5 libraries [default for hdf5 built"
+  echo "                                                     with static libraries]"
   echo " "
   echo "  <compile line>  - the normal compile line options for your compiler."
   echo "                    $prog_name uses the same compiler you used to compile"
@@ -123,7 +134,8 @@ usage() {
   echo "   HDF5_FC                  -  use a different Fortran 90 or 95 compiler"
   echo "   HDF5_FLINKER             -  use a different linker"
   echo "   HDF5_USE_SHLIB=[yes|no]  -  use shared or static version of the HDF5 library"
-  echo "                                 [default: no]"
+  echo "                                 [default: no except when built with only"
+  echo "                                           shared libraries]"
   echo " "
   echo " You can also add or change paths and flags to the compile line using"
   echo " the following environment varibles or by assigning them to their counterparts"
diff --git a/tools/misc/h5cc.in b/tools/misc/h5cc.in
index 233c80a..da1a26d 100644
--- a/tools/misc/h5cc.in
+++ b/tools/misc/h5cc.in
@@ -85,11 +85,12 @@ CLINKERBASE="@CC@"
 # CFLAGS, CPPFLAGS and LDFLAGS are reserved for use by the script user.
 # FLAGS brought from the hdf5 build are put in H5BLD_*FLAGS.
 
-# User's CPPFLAGS and CFLAGS come after their H5BLD counterparts to override
-# them.  User's LDFLAGS come just before clibpath, user's LIBS come after
-# $link_objs and before the hdf5 libraries in $link_args, followed by any
-# external library paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS
-# or LIBS carried in from the hdf5 build.
+# User's CPPFLAGS and CFLAGS come after their H5BLD counterparts.  User's 
+# LDFLAGS come just before clibpath, user's LIBS come after $link_objs and 
+# before the hdf5 libraries in $link_args, followed by any external library 
+# paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in 
+# from the hdf5 build. The order of the flags is intended to give precedence
+# to the user's flags.
 H5BLD_CFLAGS="@AM_CFLAGS@ @CFLAGS@"
 H5BLD_CPPFLAGS="@AM_CPPFLAGS@ @CPPFLAGS@"
 H5BLD_LDFLAGS="@AM_LDFLAGS@ @LDFLAGS@"
@@ -102,7 +103,17 @@ CPPFLAGS="${HDF5_CPPFLAGS:-$CPPFLAGSBASE}"
 LDFLAGS="${HDF5_LDFLAGS:-$LDFLAGSBASE}"
 LIBS="${HDF5_LIBS:-$LIBSBASE}"
 
-USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}"
+# If a static library is available, the default will be to use it.  If the only
+# available library is shared, it will be used by default.  The user can 
+# override either default, although choosing an unavailable library will result
+# in link errors.  
+STATIC_AVAILABLE="@enable_static@"
+if test "${STATIC_AVAILABLE}" = "yes"; then
+  USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}"
+else
+  USE_SHARED_LIB="${HDF5_USE_SHLIB:-yes}"
+fi
+
 
 usage() {
   # A wonderfully informative "usage" message.
@@ -121,8 +132,10 @@ usage() {
   echo "                   subdirectories [default: $prefix]"
   echo "    -show        Show the commands without executing them"
   echo "    -showconfig  Show the HDF5 library configuration summary"
-  echo "    -shlib       Compile with shared HDF5 libraries"
-  echo "    -noshlib     Compile with static HDF5 libraries [default]"
+  echo "    -shlib       Compile with shared HDF5 libraries [default for hdf5 built"
+  echo "                                                     without static libraries]"
+  echo "    -noshlib     Compile with static HDF5 libraries [default for hdf5 built"
+  echo "                                                     with static libraries]"
   echo " "
   echo "  <compile line>  - the normal compile line options for your compiler."
   echo "                    $prog_name uses the same compiler you used to compile"
@@ -136,7 +149,8 @@ usage() {
   echo "   HDF5_CC                  -  use a different C compiler"
   echo "   HDF5_CLINKER             -  use a different linker"
   echo "   HDF5_USE_SHLIB=[yes|no]  -  use shared or static version of the HDF5 library"
-  echo "                                 [default: no]"
+  echo "                                 [default: no except when built with only" 
+  echo "                                           shared libraries]"
   echo " "
   echo " You can also add or change paths and flags to the compile line using"
   echo " the following environment varibles or by assigning them to their counterparts"
@@ -374,11 +388,12 @@ if test "x$do_link" = "xyes"; then
   # module. It's okay if they're included twice in the compile line.
   link_args="$link_args $H5BLD_LDFLAGS $H5BLD_LIBS"
 
-  # User's CPPFLAGS and CFLAGS come after their H5BLD counterparts to override
-  # them.  User's LDFLAGS come just before clibpath, user's LIBS come after 
-  # $link_objs and before the hdf5 libraries in $link_args, followed by any 
-  # external library paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS 
-  # or LIBS carried in from the hdf5 build.
+  # User's CPPFLAGS and CFLAGS come after their H5BLD counterparts.  User's 
+  # LDFLAGS come just before clibpath, user's LIBS come after $link_objs and 
+  # before the hdf5 libraries in $link_args, followed by any external library 
+  # paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in 
+  # from the hdf5 build. The order of the flags is intended to give precedence
+  # to the user's flags.
   $SHOW $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS $clibpath $link_objs $LIBS $link_args $shared_link
   status=$?
 fi