[svn-r9912] Purpose:

Bug fix

Description:
Dependencies between configure files (aclocal, configure.in, configure,
Makefiles.am and .in) are still causing Makefiles to try to run autotools
during build.

Solution:
Committed all Makefiles.in to update their timestamps.
As a temporary measure, forcibly prevented automake from running
autotools during build by redefining the variables it uses.

Platforms tested:
sleipnir (No changes to Makefile content)

47 files changed, 374 insertions, 4085 deletions

diff --git a/Makefile.in b/Makefile.in
index 24fae1d..56d3354 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -62,11 +62,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = .
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -92,6 +87,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -547,88 +550,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-info-recursive uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Define rules for lib, progs, check, and tests.
 # These simply involve recursing into subdirectories.
 test _test: check
diff --git a/c++/Makefile.in b/c++/Makefile.in
index c7ad184..33879b2 100644
--- a/c++/Makefile.in
+++ b/c++/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -463,88 +466,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-info-recursive uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Clean and mostlyclean need to recurse into examples directory
 clean-local:
 	if test -f examples/Makefile; then                         \
diff --git a/c++/examples/Makefile.in b/c++/examples/Makefile.in
index 096c733..7662896 100644
--- a/c++/examples/Makefile.in
+++ b/c++/examples/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -368,88 +371,6 @@ uninstall-am: uninstall-info-am uninstall-local
 	uninstall-local
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 $(EXAMPLEDIR):
 	-$(top_srcdir)/bin/mkdirs $@
 
diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in
index 1e4afd7..6a30ed2 100644
--- a/c++/src/Makefile.in
+++ b/c++/src/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -599,88 +602,6 @@ uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \
 	uninstall-info-am uninstall-libLTLIBRARIES
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/c++/test/Makefile.in b/c++/test/Makefile.in
index bbfa64c..639112e 100644
--- a/c++/test/Makefile.in
+++ b/c++/test/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -476,88 +479,6 @@ uninstall-am: uninstall-info-am
 	uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/config/commence.am b/config/commence.am
index 2218bbb..2317b97 100644
--- a/config/commence.am
+++ b/config/commence.am
@@ -32,86 +32,9 @@ H5FC_PP=$(bindir)/h5pfc
 F9XMODEXT=@F9XMODEXT@
 F9XMODFLAG=@F9XMODFLAG@
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-##$(top_srcdir)/configure: $(top_srcdir)/configure.in
-##	-cd $(top_srcdir); autoconf
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL=
+AUTOCONF=
+AUTOMAKE=
+AUTOHEADER=
diff --git a/doc/Makefile.in b/doc/Makefile.in
index 72bfd52..8cb81fc 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -55,11 +55,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -85,6 +80,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -440,88 +443,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-info-recursive uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/ADGuide/Makefile.in b/doc/html/ADGuide/Makefile.in
index 82715bc..dcd2c5f 100644
--- a/doc/html/ADGuide/Makefile.in
+++ b/doc/html/ADGuide/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -339,88 +342,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Graphics/Makefile.in b/doc/html/Graphics/Makefile.in
index e3b554a..f01259d 100644
--- a/doc/html/Graphics/Makefile.in
+++ b/doc/html/Graphics/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -337,88 +340,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Intro/Makefile.in b/doc/html/Intro/Makefile.in
index 9211b99..1ef50d2 100644
--- a/doc/html/Intro/Makefile.in
+++ b/doc/html/Intro/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -337,88 +340,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Makefile.in b/doc/html/Makefile.in
index 2fec127..7eff220 100644
--- a/doc/html/Makefile.in
+++ b/doc/html/Makefile.in
@@ -55,11 +55,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -85,6 +80,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -487,88 +490,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/PSandPDF/Makefile.in b/doc/html/PSandPDF/Makefile.in
index a06fbc0..02f0169 100644
--- a/doc/html/PSandPDF/Makefile.in
+++ b/doc/html/PSandPDF/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -312,88 +315,6 @@ uninstall-am: uninstall-info-am
 	mostlyclean-libtool uninstall uninstall-am uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/TechNotes/Makefile.in b/doc/html/TechNotes/Makefile.in
index 0e6cf2c..a299e12 100644
--- a/doc/html/TechNotes/Makefile.in
+++ b/doc/html/TechNotes/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -346,88 +349,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Tutor/Graphics/Makefile.in b/doc/html/Tutor/Graphics/Makefile.in
index 445cdcc..edc0617 100644
--- a/doc/html/Tutor/Graphics/Makefile.in
+++ b/doc/html/Tutor/Graphics/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -345,88 +348,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Tutor/Makefile.in b/doc/html/Tutor/Makefile.in
index e70bd8a..f519656 100644
--- a/doc/html/Tutor/Makefile.in
+++ b/doc/html/Tutor/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -468,88 +471,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Tutor/examples/Makefile.in b/doc/html/Tutor/examples/Makefile.in
index d4103fc..5100004 100644
--- a/doc/html/Tutor/examples/Makefile.in
+++ b/doc/html/Tutor/examples/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -380,88 +383,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA \
 	uninstall-localdocDATA uninstall-nobase_localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/cpplus/Makefile.in b/doc/html/cpplus/Makefile.in
index 5b69b40..9a58c44 100644
--- a/doc/html/cpplus/Makefile.in
+++ b/doc/html/cpplus/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -337,88 +340,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/ed_libs/Makefile.in b/doc/html/ed_libs/Makefile.in
index 947a0e9..d41b243 100644
--- a/doc/html/ed_libs/Makefile.in
+++ b/doc/html/ed_libs/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -341,88 +344,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/ed_styles/Makefile.in b/doc/html/ed_styles/Makefile.in
index a453e70..f29aed6 100644
--- a/doc/html/ed_styles/Makefile.in
+++ b/doc/html/ed_styles/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -340,88 +343,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/fortran/Makefile.in b/doc/html/fortran/Makefile.in
index a93a32e..593b32c 100644
--- a/doc/html/fortran/Makefile.in
+++ b/doc/html/fortran/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -337,88 +340,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/examples/Makefile.in b/examples/Makefile.in
index c9005fb..73315ed 100644
--- a/examples/Makefile.in
+++ b/examples/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -375,88 +378,6 @@ uninstall-am: uninstall-info-am uninstall-local
 	uninstall-local
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Additional dependencies for each program are listed below.
 $(EXTRA_PROG): $(LIBHDF5)
 @BUILD_PARALLEL_CONDITIONAL_TRUE@	$(H5CC_PP) $(CFLAGS) -o $@ $(srcdir)/$@.c;
diff --git a/fortran/Makefile.in b/fortran/Makefile.in
index 87f9e8e..808692e 100644
--- a/fortran/Makefile.in
+++ b/fortran/Makefile.in
@@ -69,11 +69,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -99,6 +94,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -471,88 +474,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-info-recursive uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Clean and mostlyclean need to recurse into examples directory     
 clean-local:     
 	if test -f examples/Makefile; then                         \
diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in
index 0015c20..f7802f5 100644
--- a/fortran/examples/Makefile.in
+++ b/fortran/examples/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -368,88 +371,6 @@ uninstall-am: uninstall-info-am uninstall-local
 	uninstall-local
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Tell automake how to build examples using h5fc
 # Additional dependencies for the examples are listed below
 $(EXTRA_PROG): $(LIBHDF5) $(LIBH5F)
diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in
index 9b1dc19..145b11d 100644
--- a/fortran/src/Makefile.in
+++ b/fortran/src/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -575,88 +578,6 @@ uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES uninstall-local \
 	uninstall-local uninstall-settingsDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Fortran module files can have different extensions and different names
 # (e.g., different capitalizations) on different platforms.  Write rules
 # for them explicitly rather than trying to teach automake about them.
diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in
index a736e52..1797877 100644
--- a/fortran/test/Makefile.in
+++ b/fortran/test/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -744,88 +747,6 @@ uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES
 	uninstall-libLTLIBRARIES
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in
index 244a2b3..e1e731e 100644
--- a/fortran/testpar/Makefile.in
+++ b/fortran/testpar/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -442,88 +445,6 @@ uninstall-am: uninstall-info-am
 	tags uninstall uninstall-am uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Put in dependencies to the THDF5 module so that things will be built
 # in the correct order.
 thyperslab_wr.lo:           $(srcdir)/thyperslab_wr.f90 thdf5.lo
diff --git a/hl/Makefile.in b/hl/Makefile.in
index 170f066..f264f6d 100755
--- a/hl/Makefile.in
+++ b/hl/Makefile.in
@@ -60,11 +60,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -90,6 +85,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -459,88 +462,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-info-recursive uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in
index 0e9baa5..d99547a 100644
--- a/hl/fortran/Makefile.in
+++ b/hl/fortran/Makefile.in
@@ -60,11 +60,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -90,6 +85,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -457,88 +460,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-info-recursive uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in
index b42e264..f2e956a 100644
--- a/hl/fortran/src/Makefile.in
+++ b/hl/fortran/src/Makefile.in
@@ -56,11 +56,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -86,6 +81,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -491,88 +494,6 @@ uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES uninstall-local
 	uninstall-local
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Fortran module files can have different extensions and different names
 # (e.g., different capitalizations) on different platforms.  Write rules
 # for them explicitly rather than trying to teach automake about them.
diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in
index caa84ad..5115955 100644
--- a/hl/fortran/test/Makefile.in
+++ b/hl/fortran/test/Makefile.in
@@ -56,11 +56,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -86,6 +81,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -451,88 +454,6 @@ uninstall-am: uninstall-info-am
 	tags uninstall uninstall-am uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in
index aa04e9f..8d47f7d 100644
--- a/hl/src/Makefile.in
+++ b/hl/src/Makefile.in
@@ -55,11 +55,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -85,6 +80,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -491,88 +494,6 @@ uninstall-am: uninstall-includeHEADERS uninstall-info-am \
 	uninstall-info-am uninstall-libLTLIBRARIES
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in
index 6e97fdf..cc479bf 100644
--- a/hl/test/Makefile.in
+++ b/hl/test/Makefile.in
@@ -57,11 +57,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -87,6 +82,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -478,88 +481,6 @@ uninstall-am: uninstall-info-am
 	uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in
index af63b58..52cb4ed 100644
--- a/hl/tools/gif2h5/Makefile.in
+++ b/hl/tools/gif2h5/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -500,88 +503,6 @@ uninstall-am: uninstall-binPROGRAMS uninstall-info-am
 	uninstall-am uninstall-binPROGRAMS uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/perform/Makefile.in b/perform/Makefile.in
index be6b8c4..f13c7dc 100644
--- a/perform/Makefile.in
+++ b/perform/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -537,88 +540,6 @@ uninstall-am: uninstall-info-am
 	uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/src/Makefile.in b/src/Makefile.in
index 32d4e04..97a11ad 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -804,88 +807,6 @@ uninstall-am: uninstall-includeHEADERS uninstall-info-am \
 	uninstall-libLTLIBRARIES uninstall-settingsDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Error header generation
 #
 # Actually, H5Einit.h, H5Eterm.h, H5Edefin.h and H5Epubgen.h all
diff --git a/test/Makefile.in b/test/Makefile.in
index 71fd6da..1378432 100644
--- a/test/Makefile.in
+++ b/test/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -982,88 +985,6 @@ uninstall-am: uninstall-info-am
 	uninstall-am uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Additional target for running timing test
 timings _timings: testmeta
 	@for timing in $(TIMINGS) dummy; do                                   \
diff --git a/testpar/Makefile.in b/testpar/Makefile.in
index 21e3180..c8b2d5d 100644
--- a/testpar/Makefile.in
+++ b/testpar/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -503,88 +506,6 @@ uninstall-am: uninstall-info-am
 	uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/tools/Makefile.in b/tools/Makefile.in
index fbcc26d..4d7ae58 100644
--- a/tools/Makefile.in
+++ b/tools/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -463,88 +466,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-info-recursive uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/tools/gifconv/Makefile.in b/tools/gifconv/Makefile.in
index af63b58..52cb4ed 100644
--- a/tools/gifconv/Makefile.in
+++ b/tools/gifconv/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -500,88 +503,6 @@ uninstall-am: uninstall-binPROGRAMS uninstall-info-am
 	uninstall-am uninstall-binPROGRAMS uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in
index 9488fc6..98b323a 100644
--- a/tools/h5diff/Makefile.in
+++ b/tools/h5diff/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -525,88 +528,6 @@ uninstall-am: uninstall-binPROGRAMS uninstall-info-am
 	uninstall-am uninstall-binPROGRAMS uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in
index 9359bac..d8eb9ed 100644
--- a/tools/h5dump/Makefile.in
+++ b/tools/h5dump/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -513,88 +516,6 @@ uninstall-am: uninstall-binPROGRAMS uninstall-info-am
 	uninstall-am uninstall-binPROGRAMS uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in
index f4c3be0..0693c7b 100755
--- a/tools/h5import/Makefile.in
+++ b/tools/h5import/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -504,88 +507,6 @@ uninstall-am: uninstall-binPROGRAMS uninstall-info-am
 	uninstall-am uninstall-binPROGRAMS uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in
index 2e2758c..8def6f4 100644
--- a/tools/h5jam/Makefile.in
+++ b/tools/h5jam/Makefile.in
@@ -49,11 +49,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -79,6 +74,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -538,88 +541,6 @@ uninstall-am: uninstall-binPROGRAMS uninstall-info-am
 	uninstall-am uninstall-binPROGRAMS uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in
index c6fb593..c6b771e 100644
--- a/tools/h5ls/Makefile.in
+++ b/tools/h5ls/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -481,88 +484,6 @@ uninstall-am: uninstall-binPROGRAMS uninstall-info-am
 	uninstall-am uninstall-binPROGRAMS uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in
index 18242f8..28f2e33 100644
--- a/tools/h5repack/Makefile.in
+++ b/tools/h5repack/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -581,88 +584,6 @@ uninstall-am: uninstall-binPROGRAMS uninstall-info-am
 	uninstall-binPROGRAMS uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in
index 455c6d7..af7efa6 100644
--- a/tools/lib/Makefile.in
+++ b/tools/lib/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -509,88 +512,6 @@ uninstall-am: uninstall-info-am
 	tags uninstall uninstall-am uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
 build-lib: $(LIB)
diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in
index 48a0bb4..d5cfcf2 100644
--- a/tools/misc/Makefile.in
+++ b/tools/misc/Makefile.in
@@ -65,11 +65,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -95,6 +90,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -546,88 +549,6 @@ uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
 	uninstall-local
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 install-exec-local:
 	$(INSTALL) h5cc $(bindir)/$(H5CC_NAME)
 uninstall-local: